Premium Information is available for this item - Upgrade for $1 a day
3040-00-197-0210
Shouldered Shaft
3040001970210 001970210 412-0107
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
January 2023
5
Marketplace 3040-00-197-0210
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-197-0210 5+ Documents (More...)
Documents 3040-00-197-0210 Day 3040-00-197-0210 RQST Updated Every Day 3040-00-197-0210 RQST NE Related
Documents 3040-00-197-0210 Day 5995-01-412-0107 RQST Updated Every Day 5995-01-412-0107 RQST NE Restrictions
RQST NE Related Documents 5930-00-412-0107 4+ Documents ( More RQST NE Related Documents 5930-00-412
/us 3040-00-197-0210 Shouldered Shaft 3040001970210 001970210 0107 RQST NE Restrictions 5995-01-412-0107
Shouldered Shaft 3040001970210 001970210 -0210 RQST Updated Every Day 3040-00-197-0210 RQST NE
Related Documents 3040-00-197-0210 Day 5995-01-412-0107 RQST Updated Every Day 5995-01-412-0107 RQST
Request a Quotation from participating marketplace vendors Request Related Documents 5310-99-412-0107
DEMIL https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-197-0210 Shouldered Shaft 3040001970210 001970210
/fsg-81/fsc-8140/fr
Shouldered Shaft 3040001970210 001970210 197-0210 Shouldered Shaft 3040001970210001970210 https
NE Updated Every Day 8140-14-412-0107 RQST Updated Every Day 8140-14-412-0107 RQST NE Related Documents
Restrictions 3040-00-197-0210
3040-00-197-0210 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-197-0210
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-197-0210
- Australia (ZA01)
- Effective Date:
- 1 Oct 2004
Approved Sources 3040-00-197-0210
- Part Number
- Manufacturer
- Status
- 412-0107
- Manufacturer
- 78385 - Meggitt Troy Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-00-197-0210
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel
- First End Style [AAGZ]
- Woodruff Keyway
- First End Keyway Width [AMCZ]
- 0.0580 Inches Nominal
- First End External Keyway Length [AMDE]
- 0.250 Inches Nominal
- First End Distance From Keyway Center To End [AMDH]
- 0.875 Inches Nominal
- First End Diameter [AMDL]
- 0.3120 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- External Threaded
- Second End Diameter [AMFZ]
- 0.2160 Inches Nominal
- Second End External Thread Length [AMHA]
- 0.406 Inches Nominal
- Largest Step Diameter [CSPY]
- 0.700 Inches Nominal
- Overall Length [ABHP]
- 1.266 Inches Nominal
- Step Quantity [ATPC]
- 4
Similar Supply Items to 3040-00-197-0210
Freight Information 3040-00-197-0210
3040-00-197-0210 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-197-0210 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-197-0210 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 594 for ocean manifesting and military sealift. 3040-00-197-0210 is not classified as a special type of cargo when transported by water. 3040-00-197-0210 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-00-197-0210
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Validated Correction
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 5lb to 7.5lb, all dimensions less than 24"
- Above 110G
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Any Suitable Container
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --