Premium Information is available for this item - Upgrade for $1 a day
3040-00-172-8861
Shouldered Shaft
3040001728861 001728861 332109
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
8
Marketplace 3040-00-172-8861
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-172-8861 5+ Documents (More...)
Updated Every Day 3040-00-172-8861 RQST NE Related Documents 3040-00-172-8861 5+ Documents ( More...
BUY NE FedMall Updated Every Day 3040-00-172-8861 RQST NE Updated Every Day 3040-00-172-8861 RQST Updated
to enable JavaScript in your web browser . 5310- https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-172-8861
Shouldered Shaft 3040001728861 001728861 3040-00-172-8861 2+ Documents ( More... ) https https/
www.nsnlookup.com /fsg-93/fsc-9390/de 9390-12-348-3766 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-172-8861
Shouldered Shaft 3040001728861 001728861 -172-8861 2+ Documents ( More... ) https https/ https/
. 3321-092 SPRING LATCH ASSY * 61 EA NS Request Quotation Subscribe to View Vendor Details... 616-332109
SPRING LATCH ASSY * 61 EA NS Request Quotation Subscribe to View Vendor Details... 616-332109-200 https
SM-A-332109-1 27631 An item having either a single tapped winding (autotransformer type), or two or
Shouldered Shaft 3040001728861 001728861 to View Vendor Details... 616-332109-200 https https//
Restrictions 3040-00-172-8861
3040-00-172-8861 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-172-8861
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-172-8861
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-00-172-8861
- Part Number
- Manufacturer
- Status
- 332109
- Manufacturer
- 57712 - Telemechanics Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-00-172-8861
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel
- First End Style [AAGZ]
- Plain
- First End Diameter [AMDL]
- 0.2810 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Circular Grooved
- Second End Groove Width [AAHW]
- 0.0310 Inches Nominal
- Second End Groove Diameter [AAHX]
- 0.2190 Inches Nominal
- Second End Distance From End To Groove [AMFQ]
- 0.312 Inches Nominal
- Second End Diameter [AMFZ]
- 2.2500 Inches Nominal
- Largest Step Diameter [CSPY]
- 0.312 Inches Nominal
- Overall Length [ABHP]
- 14.625 Inches Nominal
- Step Quantity [ATPC]
- 3
DLA Procurement Analysis 3040-00-172-8861
Management Data 3040-00-172-8861
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-00-172-8861
Freight Information 3040-00-172-8861
3040-00-172-8861 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-172-8861 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-172-8861 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-172-8861 is not classified as a special type of cargo when transported by water. 3040-00-172-8861 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-00-172-8861
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- MIL-DTL-117, Type II, Class C, Style 1, Heavy Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box
Contracting Technical Data File (CTDF) 3040-00-172-8861 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: