Premium Information is available for this item - Upgrade for $1 a day
3040-00-169-0723
Shouldered Shaft
3040001690723 001690723 4N21727-101A
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
6
Marketplace 3040-00-169-0723
Request a Quotation from participating marketplace vendors
Restrictions 3040-00-169-0723
3040-00-169-0723 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item has been confirmed as a Critical Munitions List Item or a Sensitive Commerce Control List Item and cannot be in the possession of any party anywhere in the World who is not an authorized NATO Government. Any other possessor of this item should mutilate it now as possession violates international and local laws. This item is a confirmed Commerce Control List Item (CCLI). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-00-169-0723
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-169-0723
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
Approved Sources 3040-00-169-0723
- Part Number
- Manufacturer
- Status
- 4N21727-101A
- Manufacturer
- 98897 - Lockheed Martin Corp (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-00-169-0723
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- Nha 1680-00-080-1092,Actuator Assy;End Item 1670-00-169-0954
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.3125 Inches Nominal
- First End Groove Diameter [AAHH]
- 0.2310 Inches Minimum And 0.2410 Inches Maximum
- First End Groove Width [AAHG]
- 0.1500 Inches Nominal
- First End Distance From End To Groove [AMCY]
- 0.850 Inches Nominal
- First End External Thread Length [AMEA]
- 0.850 Inches Nominal
- First End Style [AAGZ]
- Circular Grooved And Externally Threaded
- Material [MATT]
- Steel Comp 17-4Ph
- Largest Step Diameter [CSPY]
- 0.500 Inches Nominal
- Material Document And Classification [MDCL]
- Ams-5643 Assn Std Single Material Response
- Second End Diameter [AMFZ]
- 0.5000 Inches Nominal
- Second End Distance From End To Groove [AMFQ]
- 1.100 Inches Nominal
- Second End External Keyway Length [AMFS]
- 1.750 Inches Nominal
- Second End External Thread Length [AMHA]
- 1.100 Inches Nominal
- Second End Groove Diameter [AAHX]
- 0.4170 Inches Minimum And 0.4270 Inches Maximum
- Second End Groove Width [AAHW]
- 0.1500 Inches Nominal
- Second End Style [AAHP]
- Circular Grooved Flat Keyway And Externally Threaded
- Overall Length [ABHP]
- 21.520 Inches Nominal
- Special Features [FEAT]
- Two 0.160 In. Dia By 0.090 In. Deep Holes,8.330 In. And 9.500 In. From First End
- Step Quantity [ATPC]
- 5
- Surface Finish [CSYM]
- 125.0 Microinches
DLA Procurement Analysis 3040-00-169-0723
Management Data 3040-00-169-0723
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3040-00-169-0723
Freight Information 3040-00-169-0723
3040-00-169-0723 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-169-0723 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-169-0723 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-169-0723 is not classified as a special type of cargo when transported by water. 3040-00-169-0723 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-00-169-0723
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 23.0" H x -- W x -- L
- --
- --
- --
- Any Suitable Process
- 23.0" H x -- W x -- L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Any Suitable Fiber Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 3040-00-169-0723 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: