Premium Information is available for this item - Upgrade for $1 a day
3040-00-147-4498
Shouldered Shaft
3040001474498 001474498 98484
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
3
Marketplace 3040-00-147-4498
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-147-4498 5+ Documents (More...)
(Identification) 1/2 NSN 3040-00-147-4498 (Identification) 2/2 - - 1.
United States (US) 4. 3040-00-147-4498 Marketplace Restrictions Approved Sources Datasheet Management
Shouldered Shaft 3040001474498 001474498 for $1 a day Upgrade your Account Upgrade 3040-00-147-
4498Shouldered Shaft3040001474498 001474498 98484 Mechanical Puller 5120251377241251377241 to enable
/www.nsnlookup.com /fsg-59/fsc-5999/uk 5999-99-648-24355999996482435996482435,T05-8LD T05-8LD915/9/98484
electrically 59/fsc-5999/uk 5999-99-648-24355999996482435996482435,T05-8LD web browser T05-8LD 915/9/98484
Shouldered Shaft 3040001474498 001474498 for $1 a day Upgrade your Account Upgrade 3040-00-147-
4498Shouldered Shaft3040001474498 001474498 98484 5999-99-648-2435Electrical-Electronic Component Mounting
-787624-1,TO5-8L 787624-1 TO5-8L912433/002A912433/002A912433/25SA6716 313A99718PC787624-19891915-4-98484
-787624-1,TO5-8L 787624-1 TO5-8L912433/002A912433/002A912433/25SA6716 313A99718PC787624-19891915-4-98484
Restrictions 3040-00-147-4498
3040-00-147-4498 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-147-4498
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-147-4498
- US Air Force (FUGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FUAX
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
Approved Sources 3040-00-147-4498
- Part Number
- Manufacturer
- Status
- 98484
- Manufacturer
- 00198 - Pratt & Whitney Canada Corp (Active)
- Primary Buy
- Primary Buy
- 98484
- 77445 - Rtx Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3040-00-147-4498
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.5625 Inches Minimum And 0.5635 Inches Maximum
- First End Style [AAGZ]
- Plain
- Fsc Application Data [ZZZV]
- Acft Eng R2800
- Material [MATT]
- Steel Comp 1118
- Largest Step Diameter [CSPY]
- 0.700 Inches Nominal
- Second End Diameter [AMFZ]
- 0.5625 Inches Minimum And 0.5635 Inches Maximum
- Second End Distance From End To Flat [AMFJ]
- 0.700 Inches Minimum And 2.880 Inches Maximum
- Second End Hole Diameter [AMGS]
- 0.0937 Inches Nominal
- Second End Distance From Hole Center To End [AMGT]
- 1.0700 Inches Minimum And 3.2500 Inches Maximum
- Second End Flat Length [AMFP]
- 0.750 Inches Nominal
- Second End Grooved Flat Length [AMJA]
- 0.7500 Inches Nominal
- Second End Hole Depth [AMHD]
- 0.1353 Inches Minimum And 0.1410 Inches Maximum
- Second End Style [AAHP]
- Unthreaded Cross Drilled
- Special Features [FEAT]
- 1 Hole Drilled Longitudinally Through Shaft,0.250 In. Dia,4.580 In. Lg,Countersink A And B Ends 60 Deg,0.330 In. Dia
- Overall Length [ABHP]
- 4.580 Inches Nominal
- Step Quantity [ATPC]
- 2
DLA Procurement Analysis 3040-00-147-4498
Management Data 3040-00-147-4498
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Mar 2023
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2022
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Oct 2021
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2020
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Oct 2019
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Defense Logistics Agency (DS)
- I
- X
- Formerly 2810
- X
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- PD
- PRATT & WHITNEY RECIPROCATING ENGINES & COMPONENTS, R-1340, R- 1830, R-2000, R-2800, R-4360, R-985
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 3040-00-147-4498
Freight Information 3040-00-147-4498
3040-00-147-4498 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-147-4498 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-147-4498 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-147-4498 is not classified as a special type of cargo when transported by water. 3040-00-147-4498 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-00-147-4498 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: