Premium Information is available for this item - Upgrade for $1 a day
3040-00-142-9441
Shouldered Shaft
3040001429441 001429441 506-0851-002
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
January 2023
11
Marketplace 3040-00-142-9441
Request a Quotation from participating marketplace vendors
Restrictions 3040-00-142-9441
3040-00-142-9441 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-142-9441
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-142-9441
- Brazil (YA01)
- Effective Date:
- 1 May 2012
- France (ZF01)
- Effective Date:
- 1 Apr 1991
Approved Sources 3040-00-142-9441
- Part Number
- Manufacturer
- Status
- 506-0851-002
- Manufacturer
- 95105 - Rockwell Collins, Inc. (Active)
- Primary Buy
- Primary Buy
- 506-0851-002
- 13499 - Rockwell Collins, Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3040-00-142-9441
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.1090 Inches Minimum And 0.1410 Inches Maximum
- First End Groove Diameter [AAHH]
- 0.0800 Inches Minimum And 0.0900 Inches Maximum
- First End Groove Width [AAHG]
- 0.0260 Inches Minimum And 0.0360 Inches Maximum
- First End Distance From End To Groove [AMCY]
- 0.032 Inches Nominal
- First End Style [AAGZ]
- Circular Grooved
- Material [MATT]
- Steel Corrosion Resisting
- Largest Step Diameter [CSPY]
- 0.359 Inches Minimum And 0.390 Inches Maximum
- Second End Diameter [AMFZ]
- 0.1865 Inches Minimum And 0.1880 Inches Maximum
- Special Features [FEAT]
- 2Nd End Drilled 0.156 In. Dia 0.093 In. Deep
- Overall Length [ABHP]
- 0.328 Inches Minimum And 0.359 Inches Maximum
- Step Quantity [ATPC]
- 3
NATO Stock Numbers Related to 3040-00-142-9441
Freight Information 3040-00-142-9441
3040-00-142-9441 has freight characteristics managed by France.. 3040-00-142-9441 has a variance between NMFC and UFC when transported by rail and the description should be consulted.