Premium Information is available for this item - Upgrade for $1 a day
3040-00-113-2886
Shouldered Shaft
3040001132886 001132886 606860K2
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
January 2023
5
Marketplace 3040-00-113-2886
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-113-2886 2+ Documents (More...)
/fsg-30/fsc-3040/us
Restrictions 3040-00-113-2886
3040-00-113-2886 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-113-2886
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-113-2886
- Republic of Korea (ZH01)
- Effective Date:
- 1 Aug 1995
Approved Sources 3040-00-113-2886
- Part Number
- Manufacturer
- Status
- 606860K2
- Manufacturer
- 09348 - Lucas Western Inc (Obsolete)
- Original Design
- Original Design
- 606860K2
- 88853 - Bcp Construction Products (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3040-00-113-2886
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel
- First End Style [AAGZ]
- Plain
- First End Diameter [AMDL]
- 3.3730 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Slotted
- Second End Diameter [AMFZ]
- 3.3730 Inches Nominal
- Second End Slot Depth [AMGR]
- 0.094 Inches Nominal
- Second End Slot Width [AKTN]
- 0.375 Inches Nominal
- Largest Step Diameter [CSPY]
- 3.373 Inches Nominal
- Overall Length [ABHP]
- 12.437 Inches Nominal
- Step Quantity [ATPC]
- 3
- Special Features [FEAT]
- Bore Length Of Shaft 0.750 In. Dia.;First End Two Internal Threaded Holes On 2.500 In. Bolt Circle Dia. 0.625 In. Dia. 1.125 In. Thd. Depth,Drilled Hole Same Bolt Circle Dia. Located 50 Deg. From One Thd. Hole Center 135 Deg. From Other 0.250 In. Dia. Drilled At 30 Deg. Angle Thru To Bore;Second End Flat Groove 2.625 In. Long Located At End 0.938 In. Dia.,Drilled Hole Aong Side Flat Groove 0.438 In. Deep
NATO Stock Numbers Related to 3040-00-113-2886
Freight Information 3040-00-113-2886
3040-00-113-2886 has freight characteristics.. 3040-00-113-2886 has a variance between NMFC and UFC when transported by rail and the description should be consulted.