Premium Information is available for this item - Upgrade for $1 a day
3040-00-103-2743
Flexible Shaft Assembly Core
3040001032743 001032743 S14130-804 905D525-1 14130-804
A specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE. View more Flexible Shaft Assembly Core
August 2023
6
Marketplace 3040-00-103-2743
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-103-2743 3+ Documents (More...)
Flexible Shaft Assembly Core 3040001032743 https//www.nsnlookup.com /nato/nato-stock-numbers/inc
Restrictions 3040-00-103-2743
3040-00-103-2743 is a Flexible Shaft Assembly Core that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 3040-00-103-2743
- US Air Force (FGGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FGAX
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- KE
- Greece (ZU01)
- Effective Date:
- 1 Mar 2008
Approved Sources 3040-00-103-2743
- Part Number
- Manufacturer
- Status
- S14130-804
- Manufacturer
- 72166 - B.W. Elliott Manufacturing Co., Llc (Active)
- Primary Buy
- Primary Buy
- 14130-804
- 58037 - Elliott B W Mfg Co Llc Flex Shaft (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 905D525-1
- 05606 - General Dynamics-Ots, Inc. (Active)
- Vendor Drawing
- Vendor Drawing
Datasheet 3040-00-103-2743
- Characteristic
- Specifications
- FIIG
- Specifications
- T246-D
- Core Diameter [AKMH]
- 0.630 Inches Nominal
- End Overall Length [AGQM]
- 59.880 Inches Minimum And 60.420 Inches Maximum
- End Type [APTD]
- Round Male
- Material [MATT]
- Steel
Weapon Systems (WSDC) 3040-00-103-2743
DLA Procurement Analysis 3040-00-103-2743
Management Data 3040-00-103-2743
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Mar 2023
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2022
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Oct 2021
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2020
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2019
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Department of the Navy (DN)
- N
- X
- Formerly 1005
- X
- Defense Logistics Agency (DS)
- I
- X
- Formerly 1005
- X
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-00-103-2743
Freight Information 3040-00-103-2743
3040-00-103-2743 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 129920. A Sub NMFC of X. It has a NMFC Description of SHAFTS/SHAFTING,FLEX NOI STL. 3040-00-103-2743 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-103-2743 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-103-2743 is not classified as a special type of cargo when transported by water. 3040-00-103-2743 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-00-103-2743 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: