Premium Information is available for this item - Upgrade for $1 a day
3040-00-091-6849
Shouldered Shaft
3040000916849 000916849 103488
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
August 2023
21
Marketplace 3040-00-091-6849
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-091-6849 5+ Documents (More...)
Day 3040-00-091-6849 RQST Updated Every Day 3040-00-091-6849 RQST NE Related Documents 3040-00-091-6849
(0.79 millimeter)) Day 3040-00-091-6849 RQST Updated Every Day 3040-00-091-6849 RQST NE Related Documents
Shouldered Shaft 3040000916849 https//www.nsnlookup.com /fsg-66/fsc-6650/be 6650-13-118-6581 6650131186581
6572 6650131186572131186572 6650131161891 https https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-091-6849
PLATE,RETAINING,BEARING 41 EA NS Request Quotation Subscribe to View Vendor Details... 103488 PLATE,
Shouldered Shaft 3040000916849 000916849 for $1 a day Upgrade your Account Upgrade 3040-00-091-
day Upgrade your Account Upgrade 5998-01-337-7498Circuit Card Assembly5998013377498 013377498160-103488
day Upgrade your Account Upgrade 5998-01-337-7498Circuit Card Assembly5998013377498 013377498160-103488
Shouldered Shaft 3040000916849 000916849 1891 Straight Telescope 6650131161891 131161891 Shouldered
922-6165 Bearing Retaining Plate 3110009226165,103488 Quotation Subscribe to View Vendor Details... 103488
Restrictions 3040-00-091-6849
3040-00-091-6849 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item has been confirmed as a Critical Munitions List Item or a Sensitive Commerce Control List Item and cannot be in the possession of any party anywhere in the World who is not an authorized NATO Government. Any other possessor of this item should mutilate it now as possession violates international and local laws. This item is a US Munitions List Item and must be mutilated to scrap. This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-091-6849
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-091-6849
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- KE
- Brazil (YA01)
- Effective Date:
- 1 Aug 2000
- Spain (YB01)
- Effective Date:
- 1 Feb 1994
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
- France (ZF01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- United Kingdom (ZK01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
Approved Sources 3040-00-091-6849
- Part Number
- Manufacturer
- Status
- 103488
- Manufacturer
- 62983 - Eaton Aerospace, Llc (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-00-091-6849
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.5010 Inches Nominal
- First End Spline Quantity [BDSQ]
- 12
- First End Style [AAGZ]
- Splined (Involute)
- First End Pitch Diameter [AMDS]
- 0.6000 Inches Nominal
- First End Pressure Angle [AMDR]
- 30.0000 Degrees Nominal
- First End Spline Length [AMDM]
- 0.672 Inches Nominal
- First End Spline Major Diameter [AMDP]
- 0.6430 Inches Minimum And 0.6500 Inches Maximum
- First End Spline Minor Diameter [AMDN]
- 0.5260 Inches Minimum And 0.5360 Inches Maximum
- Material Document And Classification [MDCL]
- Spec 250,Fscm 62983 Mfr Ref Single Material Response
- Material [MATT]
- Beryllium Copper
- Largest Step Diameter [CSPY]
- 0.750 Inches Nominal
- Second End Diameter [AMFZ]
- 0.5310 Inches Nominal
- Second End Pitch Diameter [AMGF]
- 0.6000 Inches Nominal
- Second End Pressure Angle [AMGE]
- 30.0000 Degrees Nominal
- Second End Spline Length [AMGA]
- 0.812 Inches Minimum And 0.826 Inches Maximum
- Second End Spline Major Diameter [AMGC]
- 0.6430 Inches Minimum And 0.6500 Inches Maximum
- Second End Spline Minor Diameter [AMGB]
- 0.5260 Inches Minimum And 0.5360 Inches Maximum
- Second End Spline Quantity [BDSR]
- 12
- Second End Style [AAHP]
- Splined (Involute)
- Overall Length [ABHP]
- 1.875 Inches Nominal
- Step Quantity [ATPC]
- 5
- Surface Finish [CSYM]
- 32.0 Microinches
Weapon Systems (WSDC) 3040-00-091-6849
DLA Procurement Analysis 3040-00-091-6849
Management Data 3040-00-091-6849
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-00-091-6849
Freight Information 3040-00-091-6849
3040-00-091-6849 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-091-6849 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-091-6849 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-091-6849 is not classified as a special type of cargo when transported by water. 3040-00-091-6849 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-00-091-6849
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box
Contracting Technical Data File (CTDF) 3040-00-091-6849 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: