Premium Information is available for this item - Upgrade for $1 a day
3040-00-078-3243
Straight Shaft
3040000783243 000783243 751627-2
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE. View more Straight Shaft
May 2023
9
Marketplace 3040-00-078-3243
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-078-3243 5+ Documents (More...)
/fsg-30/fsc-3040/us
(Identification) 1/2 NSN 3040-00-078-3243 (Identification) 2/2 - - 1.
RQST NE Updated Every Day 3040-00-078-3243 RQST Updated Every Day 3040-00-078-3243 RQST NE Related Documents
Straight Shaft 3040000783243 000783243 -891-6800 Logic Assembly 5820998916800 998916800,751627
000783242 751627 for $1 a day Upgrade your Account Upgrade 3040-00 -078-3243Straight Shaft3040000783243 000783243
/fsg-30/fsc-3040/us
Assembly 5820998916800 998916800,751627 3242Straight Shaft3040000783242 000783242 Shaft3040000783243 000783243
5360151046631151046631 3242Straight Shaft3040000783242 000783242 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-078-3243
Shaft3040000783244 000783244 751627 Compression Helical Spring 5360150077628 3243Straight Shaft3040000783243 000783243
Assembly5820998916800 998916800 751627 Logic Assembly 5820998916800 998916800,751627 3243Straight Shaft3040000783243 000783243
Shaft3040000783244 000783244 751627 Logic Assembly 5820998916800 998916800,751627 3243Straight Shaft3040000783243 000783243
Restrictions 3040-00-078-3243
3040-00-078-3243 is a Straight Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-078-3243
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-078-3243
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
Approved Sources 3040-00-078-3243
- Part Number
- Manufacturer
- Status
- 751627-2
- Manufacturer
- 80249 - Bae Systems Information And (Active)
- Original Design
- Original Design
Datasheet 3040-00-078-3243
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.2490 Inches Nominal
- First End Style [AAGZ]
- Plain
- Material Document And Classification [MDCL]
- Qq-S-764,Cond A Fed Spec Single Material Response
- Material [MATT]
- Steel Comp 303
- Second End Diameter [AMFZ]
- 0.2490 Inches Nominal
- Second End Distance From End To Groove [AMFQ]
- 0.620 Inches Nominal
- Second End Groove Diameter [AAHX]
- 0.2100 Inches Minimum And 0.2120 Inches Maximum
- Second End Groove Width [AAHW]
- 0.0290 Inches Minimum And 0.0320 Inches Maximum
- Second End Style [AAHP]
- Circular Grooved
- Overall Length [ABHP]
- 2.750 Inches Nominal
DLA Procurement Analysis 3040-00-078-3243
Management Data 3040-00-078-3243
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-00-078-3243
Freight Information 3040-00-078-3243
3040-00-078-3243 has freight characteristics managed by the Office od the Secretary of HEW.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-078-3243 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-078-3243 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-078-3243 is not classified as a special type of cargo when transported by water. 3040-00-078-3243 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-00-078-3243 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: