3040-00-001-8354

.. ) https//www.nsnlookup.com /cage Goodrich Corporation (CAGE Code 00462) DAC: 4 2 Feb 2011 3040-00-001-8354
https//www.nsnlookup.com /cage Triumph Gear Systems Inc (CAGE Code 82402) DAC: 9 24 Jul 1975 3040-00-001-8354

5307-14-311-9814 5307143119814 143119814 is a headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.

5310-14-246-1480 5310142461480 142461480 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5307-14-277-1314 5307142771314 142771314 is a headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.

: 5 1 Jan 1963 5340-14-567-0524 Mounting Plate 42325779RNCC: 3 | RNVC: 2 | DAC: 4 2 Feb 2011 3040-00-001-8354