What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 3 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 3 of 300

3040-00-204-3303
Friction Lining

002043303
S487566: RNCC: 3 | RNVC: 2
S487566: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-232-6940
Pawl

012326940
75881731: RNCC: 3 | RNVC: 2
C74451-Z1025-U506: RNCC: 5 | RNVC: 2
75881730: RNCC: 5 | RNVC: 9

19 May 1986

3040-01-236-5428
Control Cam

012365428
204-83084-4: RNCC: 3 | RNVC: 2

17 Jul 1986

3040-01-238-9276
Clamp Block

012389276
75A450020-2011: RNCC: 3 | RNVC: 2

22 Aug 1986

3040-01-009-2208
Rigid Connecting Link

010092208
3010-1: RNCC: 3 | RNVC: 2
3510-1: RNCC: 5 | RNVC: 2
SRII023A: RNCC: 5 | RNVC: 2
160C123006-1: RNCC: 7 | RNVC: 2

5 Sep 1975

3040-01-412-1151
Straight Shaft

014121151
B200662D041: RNCC: 3 | RNVC: 2
H200667D001 ITEM #33: RNCC: 5 | RNVC: 2
H206322D001 ITEM #40: RNCC: 5 | RNVC: 2
H206323D001 ITEM #40: RNCC: 5 | RNVC: 2
H206324D001 ITEM #40: RNCC: 5 | RNVC: 2
H205369D001 ITEM #52: RNCC: 5 | RNVC: 2
D200667D001 ITEM 33: RNCC: 5 | RNVC: 9
PL-H6915D001 IT NO 40: RNCC: C | RNVC: 1
PL-H6914D001 REV B IT NO 40: RNCC: C | RNVC: 1
PL-H200667D001 REV R IT NO 33: RNCC: C | RNVC: 1

11 Apr 1995

3040-01-701-3429
Spline Adapter

017013429
1193F200000: RNCC: 3 | RNVC: 9
11701520000: RNCC: 5 | RNVC: 2
5802954445: RNCC: 5 | RNVC: 9

11 May 2022

3040-01-312-4236
Linear Actuating Cylinder Assembly

013124236
1H2H0A00114476: RNCC: 3 | RNVC: 2
GG122908H0: RNCC: 3 | RNVC: 2

15 Dec 1989

3040-01-710-6446
Breather

017106446
2207462: RNCC: 3 | RNVC: 2
2207462: RNCC: 5 | RNVC: 2

13 Jun 2023

3040-01-708-4146
Transmission Range Clutch Hub

017084146
29551653: RNCC: 3 | RNVC: 2

4 Apr 2023

3040-01-708-6210
Brake Disc

017086210
206620: RNCC: 3 | RNVC: 2

13 Apr 2023

3040-01-708-3839
Rigid Connecting Link

017083839
SLS-060-102-001: RNCC: 3 | RNVC: 2

3 Apr 2023

3040-01-708-4657
Body Hub

017084657
29514715: RNCC: 3 | RNVC: 2

7 Apr 2023

3040-01-709-0669
Linear Actuating Cylinder Assembly

017090669
P1D-B050MC-0500: RNCC: 3 | RNVC: 2

9 May 2023

3040-01-423-4394
Control Cam

014234394
DN1706-338 AY79: RNCC: 3 | RNVC: 2
211046128: RNCC: 5 | RNVC: 2
211074587: RNCC: 5 | RNVC: 2
211078881: RNCC: 5 | RNVC: 2
211078881: RNCC: 5 | RNVC: 9
211092133: RNCC: 5 | RNVC: 9
752-6405280-AY79: RNCC: 5 | RNVC: 9
DN1706-338B3 AY79: RNCC: 5 | RNVC: 9
6405280 ASSY 79: RNCC: C | RNVC: 1
DN1706-338B3: RNCC: D | RNVC: 9

27 Dec 1995

3040-01-705-7419
Rigid Connecting Link

017057419
4C52039-101A: RNCC: 3 | RNVC: 2

7 Oct 2022

3040-01-708-9839
Spline Adapter

017089839
42555-164: RNCC: 3 | RNVC: 2

4 May 2023

3040-01-594-2439
Flexible Drive Shaft

015942439
3151-835: RNCC: 3 | RNVC: 2
3151-835: RNCC: 3 | RNVC: 9
CC71202-001: RNCC: 5 | RNVC: 2

25 Apr 2011

3040-01-322-9364
Rigid Connecting Link

013229364
SW33833: RNCC: 3 | RNVC: 2
SW33833-2: RNCC: 5 | RNVC: 9
SW28173: RNCC: 5 | RNVC: 9
3040013229364: RNCC: 6 | RNVC: 9

17 Jul 1990

3040-01-698-7211
Encoder

016987211
607980-199-Y: RNCC: 3 | RNVC: 2
808007-30 / SHEET 2 / ITEM 08: RNCC: 5 | RNVC: 2

3 Dec 2021

3040-01-711-0774
Straight Shaft

017110774
412-040-621-105FM: RNCC: 3 | RNVC: 2

19 Jul 2023

3040-01-706-8482
Linear Actuating Cylinder Piston Rod

017068482
7378043: RNCC: 3 | RNVC: 2
7378017-5: RNCC: 5 | RNVC: 2

22 Dec 2022

3040-01-708-4336
Linear Actuating Cylinder Assembly

017084336
REN08-21: RNCC: 3 | RNVC: 2

5 Apr 2023

3040-01-266-1771
Manual Control Lever

012661771
133041: RNCC: 3 | RNVC: 2
12211771: RNCC: 5 | RNVC: 2

21 Oct 1987

3040-01-123-7277
Straight Shaft

011237277
2022074-2: RNCC: 3 | RNVC: 2
2022074-2: RNCC: 5 | RNVC: 9
3040PL0667036: RNCC: 6 | RNVC: 9
3040PL1982905: RNCC: 6 | RNVC: 9
16VM003003-8: RNCC: 7 | RNVC: 2

16 Dec 1981

3040-01-426-2463
Push-Pull Control Assembly

014262463
301947-003-17FT: RNCC: 3 | RNVC: 2
D044194-003-17FT: RNCC: 5 | RNVC: 2
316832-3-204: RNCC: 5 | RNVC: 2
301947-003-17FT: RNCC: 5 | RNVC: 2
33C-003-17FT: RNCC: 5 | RNVC: 2
D044194-003-204: RNCC: 5 | RNVC: 2
6893071 PC 218: RNCC: 5 | RNVC: 2
301947-003-204: RNCC: 5 | RNVC: 2
33C-003-204: RNCC: 5 | RNVC: 2
33C-003-17FT: RNCC: 5 | RNVC: 9

7 Mar 1996

3040-01-601-0858
Shouldered Shaft

016010858
29566160: RNCC: 3 | RNVC: 2
16KP836: RNCC: 5 | RNVC: 2
29542554: RNCC: 5 | RNVC: 9
16KP836: RNCC: 5 | RNVC: 9

5 Jan 2012

3040-01-697-6823
Mechanical Drive Housing

016976823
251-5750199-113: RNCC: 3 | RNVC: 2
5750199/FIND NO 52: RNCC: 5 | RNVC: 1
5750199: RNCC: D | RNVC: 9

4 Oct 2021

3040-01-696-7058
Pneumatic Actuator Cylinder Housing

016967058
11.28912-2049: RNCC: 3 | RNVC: 2
X11.28912-2049: RNCC: 5 | RNVC: 9

12 Aug 2021

3040-01-703-0391
Linear Actuating Cylinder Assembly Parts Kit

017030391
RG2HDG2131: RNCC: 3 | RNVC: 2

12 Aug 2022

3040-01-468-1487
Shouldered Shaft Assembly

014681487
814228-1: RNCC: 3 | RNVC: 2
814228-2: RNCC: 3 | RNVC: 2

30 Sep 1999

3040-01-569-0122
Nonaircraft Mechanical Actuator

015690122
DZ108096: RNCC: 3 | RNVC: 2
RE523491: RNCC: 5 | RNVC: 9

17 Nov 2008

3040-01-566-2434
Flexible Drive Shaft

015662434
AT467863: RNCC: 3 | RNVC: 2
AT207333: RNCC: 5 | RNVC: 9

26 Aug 2008

3040-01-571-8411
Linear Actuating Cylinder Piston

015718411
AHC21151: RNCC: 3 | RNVC: 2
AH214177: RNCC: 5 | RNVC: 9

19 Feb 2009

3040-01-566-6423
Hydraulic Control Assembly

015666423
AT488662: RNCC: 3 | RNVC: 2
AT356032: RNCC: 5 | RNVC: 9
AT362746: RNCC: 5 | RNVC: 9

5 Sep 2008

3040-01-516-6900
Breather

015166900
SMBT-80-S-10-B0.7-N12-0: RNCC: 3 | RNVC: 2
057135-85: RNCC: 3 | RNVC: 9
3087AS109-1: RNCC: 7 | RNVC: 2

15 Jan 2004

3040-01-440-5402
Push-Pull Control Assembly

014405402
CCX63340: RNCC: 3 | RNVC: 2
301947-003-40FT: RNCC: 5 | RNVC: 2
33C-480 IN.: RNCC: 5 | RNVC: 9
301947-003-480: RNCC: 5 | RNVC: 9
33C-480 IN.: RNCC: 5 | RNVC: 9
D044194-003-40FT: RNCC: 5 | RNVC: 9
301947-003-480: RNCC: 5 | RNVC: 9
301947-003-40FT: RNCC: 5 | RNVC: 9
D044194-003-40FT: RNCC: 5 | RNVC: 9
D044194-003-480: RNCC: 5 | RNVC: 9

16 Jan 1997

3040-01-544-0150
Transmission Fluid Cooler

015440150
3-1358B: RNCC: 3 | RNVC: 2
1000881: RNCC: 5 | RNVC: 2
54043-000: RNCC: 5 | RNVC: 2
3-1358B: RNCC: 5 | RNVC: 9

28 Sep 2006

3040-01-308-7098
Rigid Connecting Link

013087098
145CS340-17: RNCC: 3 | RNVC: 2
89-10000-17: RNCC: 3 | RNVC: 9
145CS340-17 77272: RNCC: 7 | RNVC: 2

3 Oct 1989

3040-01-710-9691
Piston Ring

017109691
B7 090C P5008: RNCC: 3 | RNVC: 2

11 Jul 2023

3040-01-711-0402
Shouldered Shaft

017110402
206-011-125-005: RNCC: 3 | RNVC: 2

17 Jul 2023

3040-01-125-1520
Rigid Connecting Link

011251520
NAS359: RNCC: 3 | RNVC: 1
NAS359-83-1290: RNCC: 3 | RNVC: 2

22 Jan 1982

3040-00-946-5397
Rigid Connecting Link

009465397
NAS356: RNCC: 3 | RNVC: 1
NAS356-64-980: RNCC: 3 | RNVC: 2

11 Mar 1966

3040-01-119-0796
Rigid Connecting Link

011190796
NAS356: RNCC: 3 | RNVC: 1
NAS356-84-1075: RNCC: 3 | RNVC: 2

16 Sep 1981

3040-01-088-5113
Rigid Connecting Link

010885113
631A569-2: RNCC: 3 | RNVC: 2
631A569P2: RNCC: 5 | RNVC: 9
7378E65P12: RNCC: 5 | RNVC: 9
631A569P2: RNCC: 5 | RNVC: 9
631A569PC2: RNCC: C | RNVC: 1

15 Jan 1980

3040-00-786-3410
Spur Gearshaft

007863410
415922: RNCC: 3 | RNVC: 2
415922: RNCC: 5 | RNVC: 2
415922B: RNCC: 5 | RNVC: 2
415922: RNCC: 5 | RNVC: 2
415922: RNCC: 5 | RNVC: 9
415922: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-034-4216
Shouldered Shaft

000344216
1948529: RNCC: 3 | RNVC: 2
K-500-CH-0589: RNCC: 5 | RNVC: 2
2132 1948529: RNCC: 5 | RNVC: 2
1948529: RNCC: 5 | RNVC: 2
1948529: RNCC: 5 | RNVC: 2
019-00006-11: RNCC: 5 | RNVC: 2
A42199: RNCC: 5 | RNVC: 2
72083: RNCC: 5 | RNVC: 9
1948529: RNCC: 5 | RNVC: 9
1945472: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-332-6280
Shouldered Shaft

003326280
14-18838-00: RNCC: 3 | RNVC: 2
A705582: RNCC: 5 | RNVC: 2
14-18838-00: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-741-8491
Flexible Shaft Assembly Core

007418491
M10215-1F409: RNCC: 2 | RNVC: 2
MIL-DTL-10215: RNCC: 4 | RNVC: 1
7418491: RNCC: 5 | RNVC: 1
1582034: RNCC: 5 | RNVC: 1
418049-77: RNCC: 5 | RNVC: 9
MIL-S-10215: RNCC: 5 | RNVC: 9
418049-77 1-2: RNCC: 5 | RNVC: 9
MS51072-9: RNCC: 5 | RNVC: 9
1582034: RNCC: 5 | RNVC: 9
SPS1012W: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-627-2728
Hub Clamp

006272728
503755: RNCC: 3 | RNVC: 2
SC313: RNCC: 3 | RNVC: 2
E105632PC13: RNCC: 3 | RNVC: 2
CG125: RNCC: 3 | RNVC: 2
L4-3: RNCC: 3 | RNVC: 2
134375-003: RNCC: 5 | RNVC: 2
843990-1: RNCC: 5 | RNVC: 2
215-002-0005: RNCC: 5 | RNVC: 2
41245-1: RNCC: 5 | RNVC: 2
SC-313: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-859-6119
Rigid Connecting Link

008596119
NAS356: RNCC: 3 | RNVC: 1
NAS356-64-820: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-394-6380
Shouldered Shaft

003946380
SMS-BS5-1708: RNCC: 3 | RNVC: 2
UM1: RNCC: 3 | RNVC: 2
11268: RNCC: 5 | RNVC: 2
A-0598: RNCC: 5 | RNVC: 2
394-6380: RNCC: 5 | RNVC: 2
2073PC66T068: RNCC: 5 | RNVC: 9
BS1193PC79T081: RNCC: 5 | RNVC: 9
BS5-1788PC84: RNCC: 5 | RNVC: 9
BS5-1791PC84: RNCC: 5 | RNVC: 9
BS5-1711PC79T081: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-346-4175
Straight Shaft

013464175
J115133: RNCC: 3 | RNVC: 2
PL-H90007D001 REV C ITEM 46: RNCC: 5 | RNVC: 2
C90007D047: RNCC: 5 | RNVC: 2

4 Oct 1991

3040-01-700-0411
Straight Shaft

017000411
26018005237: RNCC: 3 | RNVC: 2
S9311-D5-MMA-010 7-12/31: RNCC: C | RNVC: 1

14 Mar 2022

3040-01-707-7798
Linear Actuating Cylinder Assembly Parts Kit

017077798
AT160662: RNCC: 3 | RNVC: 2

22 Feb 2023

3040-01-329-3526
Control Cam

013293526
07207001128: RNCC: 3 | RNVC: 2
B07207.001.128: RNCC: 5 | RNVC: 1
37207.001.128: RNCC: 5 | RNVC: 9
20202 FIND 15: RNCC: 5 | RNVC: 9
B7207.001.128: RNCC: 5 | RNVC: 9
B7207.001.128: RNCC: 5 | RNVC: 9
20202: RNCC: 5 | RNVC: 9

15 Nov 1990

3040-01-706-5275
Linear Actuating Cylinder Assembly

017065275
20-213(3.5X30): RNCC: 3 | RNVC: 2

2 Dec 2022

3040-01-466-8024
Brake Band And Lining

014668024
J113861: RNCC: 3 | RNVC: 2
113861: RNCC: 5 | RNVC: 9
113861 NON-ASBE: RNCC: C | RNVC: 1

3 Aug 1999

3040-01-529-9909
Push-Pull Control Assembly

015299909
8M0176523: RNCC: 3 | RNVC: 2
865437A02: RNCC: 5 | RNVC: 9

11 May 2005

3040-01-554-9324
Control Pedal

015549324
301589: RNCC: 3 | RNVC: 2
301589: RNCC: 3 | RNVC: 2
194744: RNCC: 3 | RNVC: 9
194744: RNCC: 5 | RNVC: 9
11B4600155: RNCC: 7 | RNVC: 2

23 Aug 2007

3040-01-182-6262
Rigid Connecting Link

011826262
SR10784A-6017: RNCC: 3 | RNVC: 2
7514-6017: RNCC: 3 | RNVC: 2
KSL125700BX-6017: RNCC: 5 | RNVC: 2
7014-177: RNCC: 5 | RNVC: 9
LE162-0002-6017: RNCC: 7 | RNVC: 2

26 Jun 1984

3040-01-711-0329
Mechanical Drive Housing

017110329
00-972586: RNCC: 3 | RNVC: 2

17 Jul 2023

3040-01-711-0665
Transmission Fluid Cooler

017110665
213PL/SN30104-47398: RNCC: 3 | RNVC: 2
6816185: RNCC: 5 | RNVC: 2

18 Jul 2023

3040-01-711-0880
Straight Shaft

017110880
KHK110163A01: RNCC: 3 | RNVC: 2

19 Jul 2023

3040-00-922-8327
Main Shaft

009228327
12ND6512: RNCC: 3 | RNVC: 2
737094: RNCC: 3 | RNVC: 2
ND6512PC12: RNCC: 5 | RNVC: 2
ND5168PC12: RNCC: 5 | RNVC: 2
737075: RNCC: 5 | RNVC: 2
ND6512PC12: RNCC: 5 | RNVC: 9
12ND6512: RNCC: 5 | RNVC: 9
ND5168PC12: RNCC: 5 | RNVC: 9
737094: RNCC: 5 | RNVC: 9
737075: RNCC: 5 | RNVC: 9

25 Dec 1965

3040-01-476-5018
Breather

014765018
6U1989: RNCC: 3 | RNVC: 2
6U-1989: RNCC: 5 | RNVC: 2

14 Jul 2000

3040-01-702-9594
Linear Actuating Cylinder Assembly

017029594
AHC19000: RNCC: 3 | RNVC: 2
AHC19000: RNCC: 5 | RNVC: 2

9 Aug 2022

3040-01-709-0265
Shouldered Shaft

017090265
91559-1: RNCC: 3 | RNVC: 2

6 May 2023

3040-01-708-7290
Shouldered Shaft

017087290
16201429: RNCC: 3 | RNVC: 2

19 Apr 2023

3040-01-708-2762
Counterbalance Weight

017082762
SLS-030-701-141: RNCC: 3 | RNVC: 2

27 Mar 2023

3040-01-708-8490
Manual Control Lever

017088490
12647466: RNCC: 3 | RNVC: 2

27 Apr 2023

3040-01-707-8339
Straight Shaft

017078339
211028763: RNCC: 3 | RNVC: 2
187-6985861-14: RNCC: 5 | RNVC: 2
H692-1605-14: RNCC: C | RNVC: 1
H692-1605: RNCC: D | RNVC: 9
187-6985861: RNCC: D | RNVC: 9

24 Feb 2023

3040-01-706-7203
Diesel Shaft Hub

017067203
A80090037M-A: RNCC: 3 | RNVC: 2
AW25M10017 / ITEM 1: RNCC: D | RNVC: 9

14 Dec 2022

3040-01-707-4931
Shaft Idler

017074931
14000132: RNCC: 3 | RNVC: 2

6 Feb 2023

3040-01-707-5584
Hub Clamp

017075584
RRM000298057: RNCC: 3 | RNVC: 2

9 Feb 2023

3040-01-707-3698
Straight Shaft Assembly

017073698
LAN-11-803-NA: RNCC: 3 | RNVC: 2

30 Jan 2023

3040-01-702-1823
Counterbalance Weight

017021823
717407166-001: RNCC: 3 | RNVC: 2

22 Jun 2022

3040-01-706-8810
Shouldered Shaft

017068810
7061295: RNCC: 3 | RNVC: 2

28 Dec 2022

3040-01-706-9329
Rigid Connecting Link

017069329
12638848: RNCC: 3 | RNVC: 2

4 Jan 2023

3040-01-707-2640
Differential Spider

017072640
2021-16D: RNCC: 3 | RNVC: 2
S6162-DL-MMA-010-FIG IT NO-7-6-6: RNCC: 5 | RNVC: 2

25 Jan 2023

3040-01-707-1258
Worm Shaft

017071258
219-8203088PART462: RNCC: 3 | RNVC: 1

18 Jan 2023

3040-00-971-5975
Worm Shaft

009715975
8615827: RNCC: 3 | RNVC: 2
3040-00-971-5975: RNCC: 6 | RNVC: 9

28 Sep 1966

3040-01-005-1610
Rigid Connecting Link

010051610
SR11075A: RNCC: 3 | RNVC: 2
3505-1: RNCC: 5 | RNVC: 2
SR11484A3: RNCC: 5 | RNVC: 9
3505-1*G: RNCC: 5 | RNVC: 9
160C120005-3: RNCC: 5 | RNVC: 9
160C120005-1: RNCC: 7 | RNVC: 2
160C120005-3: RNCC: C | RNVC: 1

21 Jun 1975

3040-01-010-3186
Mechanical Drive Housing

010103186
8761155-1: RNCC: 3 | RNVC: 2
2930010103186: RNCC: 5 | RNVC: 9
3040010103186: RNCC: 6 | RNVC: 9
2930010103186: RNCC: 6 | RNVC: 9

25 Sep 1975

3040-01-655-2076
Rigid Connecting Link

016552076
415T3314Y5: RNCC: 3 | RNVC: 2
415T3314-5: RNCC: C | RNVC: 1

21 May 2016

3040-01-483-4568
Control Cam

014834568
845-7108907 ITEM 14: RNCC: 3 | RNVC: 2
845-7108906 ITEM 19: RNCC: 5 | RNVC: 2
845-7108535 ITEM 15: RNCC: 5 | RNVC: 2
2643-825-89 ITEM 14: RNCC: 5 | RNVC: 2
2643-825-91 ITEM 39: RNCC: 5 | RNVC: 2
2643-825-85 ITEM 15: RNCC: 5 | RNVC: 2
2643-744-01 ITEM 19: RNCC: 5 | RNVC: 2
845-7286651 ITEM 39: RNCC: 5 | RNVC: 2
7108535: RNCC: D | RNVC: 9
7108907: RNCC: D | RNVC: 9

29 Mar 2001

3040-01-710-6898
Ballscrew Assembly

017106898
167-7108111-A12: RNCC: 3 | RNVC: 1
7383858-A396: RNCC: 5 | RNVC: 1
H5470001-A396: RNCC: 5 | RNVC: 1
7383858-A396D4: RNCC: 5 | RNVC: 2
H5470001-A396D4: RNCC: 5 | RNVC: 2
167-7108111-A12D4: RNCC: 5 | RNVC: 2
167 7108111: RNCC: D | RNVC: 9

16 Jun 2023

3040-01-702-0514
Speedometer-Tachometer Drive Adapter

017020514
12596786: RNCC: 3 | RNVC: 2

21 Jun 2022

3040-01-711-0675
Rigid Connecting Link

017110675
17P1A4832-513: RNCC: 3 | RNVC: 2
17P1A4832: RNCC: D | RNVC: 9

18 Jul 2023

3040-01-710-8462
Linear Actuating Cylinder

017108462
BC3Z-16C826-A: RNCC: 3 | RNVC: 2
BC3Z-16C826-A: RNCC: 5 | RNVC: 2

29 Jun 2023

3040-01-700-6731
Linear Actuating Cylinder Assembly

017006731
312678: RNCC: 3 | RNVC: 2

6 Apr 2022

3040-01-708-7536
Shouldered Shaft

017087536
00-971963: RNCC: 3 | RNVC: 2

20 Apr 2023

3040-01-700-6845
Linear Actuating Cylinder Assembly Parts Kit

017006845
315071: RNCC: 3 | RNVC: 2
313409: RNCC: D | RNVC: 9

7 Apr 2022

3040-01-701-4603
Straight Shaft

017014603
7000-2857: RNCC: 3 | RNVC: 2
506-40-2: RNCC: 5 | RNVC: 9
241-8592072 REV C SHEET 1 OF 2: RNCC: D | RNVC: 9

17 May 2022

3040-01-053-4562
Remote Control Lever

010534562
4M1853: RNCC: 3 | RNVC: 2
4M-1853: RNCC: 5 | RNVC: 2
IPD4M1853: RNCC: 5 | RNVC: 9

5 Jan 1978

3040-01-432-4549
Straight Axle

014324549
1Y7927: RNCC: 3 | RNVC: 2
1Y-7927: RNCC: 5 | RNVC: 2

6 Jun 1996

3040-01-701-5675
Shaft Retaining Plate

017015675
341441-1: RNCC: 3 | RNVC: 2

24 May 2022

3040-01-668-4159
Rigid Connecting Link

016684159
4000851: RNCC: 3 | RNVC: 2
S0160-LA: RNCC: 5 | RNVC: 2
3711T33: RNCC: 5 | RNVC: 2

22 Nov 2017

3040-01-527-6865
Rigid Connecting Link

015276865
11581549: RNCC: 3 | RNVC: 2
E1211110: RNCC: 5 | RNVC: 2

11 Feb 2005

3040-01-701-5674
Shaft Retaining Plate

017015674
341343-1: RNCC: 3 | RNVC: 2

24 May 2022

3040-01-426-2466
Push-Pull Control Assembly

014262466
CCX63311: RNCC: 3 | RNVC: 2
301947-003-132: RNCC: 3 | RNVC: 9
CC23011: RNCC: 5 | RNVC: 2
6893071 PC 219: RNCC: 5 | RNVC: 2
301947-003-11FT: RNCC: 5 | RNVC: 9
301947-003-11FT: RNCC: 5 | RNVC: 9
33C-003-11FT: RNCC: 5 | RNVC: 9
33C-003-132: RNCC: 5 | RNVC: 9
33C-003-132: RNCC: 5 | RNVC: 9
D044194-003-11FT: RNCC: 5 | RNVC: 9

7 Mar 1996

3040-01-512-5717
Brake Disc

015125717
AHA0200-112-200: RNCC: 3 | RNVC: 2
AHA0200-112: RNCC: 5 | RNVC: 9
A9876 ITEM 8: RNCC: 5 | RNVC: 9
AHA200-112-900 UNFINISHED PART: RNCC: 5 | RNVC: 9

4 Sep 2003

3040-01-703-2259
Linear Actuating Cylinder Assembly

017032259
A1-20459: RNCC: 3 | RNVC: 2
20459B: RNCC: 5 | RNVC: 2
20459 REV B: RNCC: D | RNVC: 9

24 Aug 2022

3040-01-168-1464
Shouldered Shaft

011681464
3536708-001: RNCC: 3 | RNVC: 2
BSP297L6327: RNCC: 5 | RNVC: 2
3536708-001: RNCC: 5 | RNVC: 2
HE010242: RNCC: 5 | RNVC: 2
010242: RNCC: 5 | RNVC: 2
91787-991: RNCC: 5 | RNVC: 9
91787-991: RNCC: 5 | RNVC: 9
3536708-001: RNCC: 5 | RNVC: 9
451-0957: RNCC: 6 | RNVC: 9

13 Dec 1983

3040-01-159-7151
Pressure Regulator Shaft And Spring Assembly

011597151
8922634: RNCC: 3 | RNVC: 2
K-8922634: RNCC: 3 | RNVC: 2
2AG471: RNCC: 5 | RNVC: 2
8922634: RNCC: 5 | RNVC: 2
2AG471: RNCC: 5 | RNVC: 9
K-8922634: RNCC: 5 | RNVC: 9
2AG471: RNCC: 5 | RNVC: 9
3040011597151: RNCC: 6 | RNVC: 9

13 Aug 1983

3040-01-708-9271
Towed Body Tail

017089271
3350-AS-149-5: RNCC: 3 | RNVC: 2
3350-AS-149-5 REV Y: RNCC: D | RNVC: 9

1 May 2023

3040-01-697-8247
Linear Actuating Cylinder Assembly

016978247
HC3Z-2140-A: RNCC: 3 | RNVC: 2
HC3Z-2140-A: RNCC: 3 | RNVC: 9

13 Oct 2021

3040-01-703-3096
Linear Actuating Cylinder Assembly

017033096
26683016: RNCC: 3 | RNVC: 2
69.65706-0005: RNCC: 5 | RNVC: 2
69.65706-0005: RNCC: 5 | RNVC: 2

29 Aug 2022

3040-01-698-1759
Electrical-Fluid Pressure Connector Assembly

016981759
06354369: RNCC: 3 | RNVC: 2
8199200: RNCC: 5 | RNVC: 2
8199200/SHEET 1: RNCC: D | RNVC: 9

2 Nov 2021

3040-01-698-9525
Linear Actuating Cylinder Assembly

016989525
151554B: RNCC: 3 | RNVC: 2
151554B / SHEET 1 AND 2: RNCC: D | RNVC: 9

22 Dec 2021

3040-01-708-7332
Straight Shaft

017087332
412-040-620-101FM: RNCC: 3 | RNVC: 2

19 Apr 2023

3040-01-708-5090
Linear Actuating Cylinder Piston Rod

017085090
92400-04801-107: RNCC: 3 | RNVC: 2

11 Apr 2023

3040-01-708-4239
Rigid Connecting Link

017084239
SLS-060-106-101: RNCC: 3 | RNVC: 2

5 Apr 2023

3040-00-859-6118
Rigid Connecting Link

008596118
NAS356: RNCC: 3 | RNVC: 1
NAS356-64-550: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-628-0506
Ball Joint

006280506
150-0639: RNCC: 3 | RNVC: 2
0100146: RNCC: 5 | RNVC: 2
M150A639: RNCC: 5 | RNVC: 2
8409763: RNCC: 5 | RNVC: 2
7016837: RNCC: 5 | RNVC: 2
A8865: RNCC: 5 | RNVC: 9
5S1101: RNCC: 5 | RNVC: 9
M103: RNCC: 5 | RNVC: 9
TYPEC: RNCC: 5 | RNVC: 9
SS1101: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-541-0995
Ball Joint

005410995
210165: RNCC: 3 | RNVC: 2
SF-96#5: RNCC: 5 | RNVC: 2
FS017PC47: RNCC: 5 | RNVC: 9
JS32PC29: RNCC: 5 | RNVC: 9
ENJ32PC28: RNCC: 5 | RNVC: 9
38BC402: RNCC: 5 | RNVC: 9
1301362: RNCC: 5 | RNVC: 9
109417: RNCC: 5 | RNVC: 9
ENE32PC28: RNCC: 5 | RNVC: 9
SF96N05 3-8: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-419-5816
Manual Control Lever

004195816
02324100: RNCC: 3 | RNVC: 2
D40687: RNCC: 5 | RNVC: 2
01020306: RNCC: 5 | RNVC: 9
95000521: RNCC: 5 | RNVC: 9
01191200: RNCC: 5 | RNVC: 9
01020300: RNCC: 5 | RNVC: 9
14580: RNCC: 5 | RNVC: 9
95000521: RNCC: 5 | RNVC: 9
6110C42-682: RNCC: 5 | RNVC: 9
01-020300: RNCC: 5 | RNVC: 9

2 Dec 1970

3040-00-092-1486
Shaft Collar

000921486
SC75: RNCC: 3 | RNVC: 2
8193067: RNCC: 5 | RNVC: 2
26300: RNCC: 5 | RNVC: 9
18-111: RNCC: 5 | RNVC: 9
3040000921486: RNCC: 6 | RNVC: 9
9026300: RNCC: C | RNVC: 1
32X105: RNCC: C | RNVC: 1
504-008: RNCC: E | RNVC: 8

1 Jan 1961

3040-00-065-7314
Straight Shaft

000657314
C7041-64: RNCC: 3 | RNVC: 2
7041-64: RNCC: 5 | RNVC: 2
C7014-64: RNCC: 5 | RNVC: 2
C7014-64: RNCC: 5 | RNVC: 2
C7014-64: RNCC: 5 | RNVC: 2
C7014-64: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-451-3542
Straight Shaft

014513542
211068974: RNCC: 3 | RNVC: 1
751-6402301 FIND 15: RNCC: 5 | RNVC: 1
751-6402301-15: RNCC: 5 | RNVC: 1
751-6402302 FIND15: RNCC: 5 | RNVC: 1
751-6402302-15: RNCC: 5 | RNVC: 1
751-6402301 ITEM15: RNCC: 5 | RNVC: 1
751-6402327 ITEM1: RNCC: 5 | RNVC: 1
211068974L1: RNCC: 5 | RNVC: 2
751-6402301 FIND 15L1: RNCC: 5 | RNVC: 2
751-6402302 ITEM 15L1: RNCC: 5 | RNVC: 2

13 Dec 1997

3040-01-706-6981
Bell Crank Support

017066981
74824-4: RNCC: 3 | RNVC: 2

13 Dec 2022

3040-01-707-6351
Push-Pull Control Assembly

017076351
200-03333-0096: RNCC: 3 | RNVC: 2

14 Feb 2023

3040-01-706-8408
Ball Joint

017068408
BC-18: RNCC: 3 | RNVC: 2

22 Dec 2022

3040-01-707-4485
Belt-Chain Tension Adjusting Device

017074485
TVD1135: RNCC: 3 | RNVC: 2

2 Feb 2023

3040-01-706-5888
Shouldered Shaft

017065888
328-2560: RNCC: 3 | RNVC: 2

7 Dec 2022

3040-01-707-1492
Counterbalance Weight

017071492
SLS-010-313-101: RNCC: 3 | RNVC: 2

19 Jan 2023

3040-01-707-1550
Rigid Connecting Link

017071550
206-010-795-105: RNCC: 3 | RNVC: 2

19 Jan 2023

3040-01-295-0950
Mechanical Drive Housing

012950950
1262702749: RNCC: 3 | RNVC: 2
94275-991: RNCC: 3 | RNVC: 9
A1262702749: RNCC: 5 | RNVC: 2
1262702749: RNCC: 5 | RNVC: 9
4538742-677: RNCC: 5 | RNVC: 9

28 Feb 1989

3040-01-525-5318
Rigid Connecting Link

015255318
11581525: RNCC: 3 | RNVC: 2
E1211121: RNCC: 5 | RNVC: 2
777.21.015: RNCC: 5 | RNVC: 2

15 Nov 2004

3040-01-393-5839
Back Disc

013935839
DX-100-1 ITEM 21: RNCC: 3 | RNVC: 9
MC 152: RNCC: 5 | RNVC: 9
130-0050: RNCC: 5 | RNVC: 9

22 Jul 1994

3040-01-702-9961
Transmission Sleeve

017029961
11920017000: RNCC: 3 | RNVC: 2
5802951894: RNCC: 5 | RNVC: 2

11 Aug 2022

3040-01-706-1669
Rigid Connecting Link

017061669
983-9041-454: RNCC: 3 | RNVC: 2

4 Nov 2022

3040-01-705-4074
Shouldered Shaft

017054074
00-974938: RNCC: 3 | RNVC: 2

19 Sep 2022

3040-01-707-8364
Straight Shaft

017078364
14000174: RNCC: 3 | RNVC: 2

24 Feb 2023

3040-01-707-0007
Rigid Connecting Link

017070007
167-7106771-108: RNCC: 3 | RNVC: 2
211064675: RNCC: 5 | RNVC: 2
H547-0292-PN-108: RNCC: C | RNVC: 1
7106771: RNCC: D | RNVC: 9

9 Jan 2023

3040-01-708-0865
Piston Ring

017080865
3177491-1: RNCC: 3 | RNVC: 2

15 Mar 2023

3040-01-213-4444
Shouldered Shaft

012134444
M9220417: RNCC: 3 | RNVC: 2
9220417: RNCC: 3 | RNVC: 9

26 Jul 1985

3040-01-699-1368
Manual Control Lever

016991368
725-8838197-A1: RNCC: 3 | RNVC: 2
LOA007265-A1: RNCC: 5 | RNVC: 2

11 Jan 2022

3040-01-706-7928
Counterbalance Weight

017067928
6539155-1: RNCC: 3 | RNVC: 2

19 Dec 2022

3040-00-678-1285
Remote Control Lever

006781285
8754275: RNCC: 3 | RNVC: 2
2530006781285: RNCC: 6 | RNVC: 9

26 Mar 1977

3040-01-708-8609
Nonaircraft Mechanical Actuator

017088609
28597: RNCC: 3 | RNVC: 2
110-28325 ITEM 4: RNCC: C | RNVC: 1
110-28325: RNCC: D | RNVC: 9

27 Apr 2023

3040-01-051-1524
Shouldered Shaft

010511524
12251723: RNCC: 3 | RNVC: 2
2520010511524: RNCC: 5 | RNVC: 9
2520010511524: RNCC: 6 | RNVC: 9
3040010511524: RNCC: 6 | RNVC: 9

25 Nov 1977

3040-01-044-5312
Linear Actuating Cylinder Assembly Parts Kit

010445312
190-158: RNCC: 3 | RNVC: 9
190-101: RNCC: 5 | RNVC: 9

15 Jul 1977

3040-01-710-6378
Shouldered Shaft

017106378
3031645-001: RNCC: 3 | RNVC: 2

12 Jun 2023

3040-01-708-3910
Rotary Actuator

017083910
15098F: RNCC: 3 | RNVC: 2
150984-CC73592: RNCC: 5 | RNVC: 2
15098F Q5TR: RNCC: 5 | RNVC: 2
CC73592: RNCC: 5 | RNVC: 2
CC7359Q5: RNCC: 5 | RNVC: 2
150984-CC73592 Q5TR: RNCC: 5 | RNVC: 2

4 Apr 2023

3040-01-708-2764
Counterbalance Weight

017082764
SLS-030-701-139: RNCC: 3 | RNVC: 2

27 Mar 2023

3040-01-710-6518
Housing Adapter

017106518
112149070: RNCC: 3 | RNVC: 2

13 Jun 2023

3040-01-710-3083
Hydraulics Skid

017103083
587-8888676 ASSY 99: RNCC: 3 | RNVC: 2

23 May 2023

3040-01-709-2515
Shaft Collar

017092515
18-0009-1: RNCC: 3 | RNVC: 2
7-4845-1: RNCC: 5 | RNVC: 2
18-0009: RNCC: D | RNVC: 9

19 May 2023

3040-01-700-9017
Rotary Actuating Cylinder Assembly

017009017
341B11210AB1181-104: RNCC: 3 | RNVC: 2

19 Apr 2022

3040-01-699-9276
Linear Actuating Cylinder Assembly

016999276
M119-0: RNCC: 3 | RNVC: 2
12680029: RNCC: 7 | RNVC: 2

7 Mar 2022

3040-01-701-9820
Straight Shaft Assembly

017019820
12639371: RNCC: 3 | RNVC: 2

21 Jun 2022

3040-01-701-4115
Straight Shaft

017014115
251T0100-117: RNCC: 3 | RNVC: 1

16 May 2022

3040-01-702-0516
Speedometer-Tachometer Drive Adapter

017020516
12596785: RNCC: 3 | RNVC: 2

21 Jun 2022

3040-01-700-2987
Linear Actuating Cylinder Assembly

017002987
90340: RNCC: 3 | RNVC: 2

23 Mar 2022

3040-01-702-0421
Straight Shaft

017020421
12596229: RNCC: 3 | RNVC: 2

21 Jun 2022

3040-01-700-8082
Hydraulic Accumulator

017008082
A153100: RNCC: 3 | RNVC: 2
RCS-A561-400 REV C 9: RNCC: 5 | RNVC: 1
92045: RNCC: 5 | RNVC: 2
A(X)3100(Y): RNCC: D | RNVC: 9

14 Apr 2022

3040-01-699-5080
Linear Actuating Cylinder Cap

016995080
332/G0349: RNCC: 3 | RNVC: 2

4 Feb 2022

3040-01-700-6903
Rotary Actuating Cylinder Assembly

017006903
15099C-CC73594: RNCC: 3 | RNVC: 1
15099C-CC73594TR: RNCC: 5 | RNVC: 2

7 Apr 2022

3040-01-700-1745
Breather

017001745
10091893: RNCC: 3 | RNVC: 2

19 Mar 2022

3040-01-697-7105
Linear Actuating Cylinder Assembly

016977105
521-3762: RNCC: 3 | RNVC: 2

6 Oct 2021

3040-01-697-9442
Spur Gearshaft

016979442
776-0234: RNCC: 3 | RNVC: 2

20 Oct 2021

3040-01-698-8710
Linear Actuating Cylinder Assembly

016988710
P011972: RNCC: 3 | RNVC: 2
CST-18501: RNCC: 5 | RNVC: 2

16 Dec 2021

3040-01-698-3866
Power Transmission Components Boot

016983866
845-4788698-ASSEMBLY 34: RNCC: 3 | RNVC: 2
520-4674705-ITEM 49: RNCC: 5 | RNVC: 1

15 Nov 2021

3040-01-698-9617
Shaft Retaining Plate

016989617
00-848564: RNCC: 3 | RNVC: 2

23 Dec 2021

3040-01-699-4021
Remote Control Lever

016994021
725-8837356-A2: RNCC: 3 | RNVC: 2
LOA007263-A2: RNCC: 5 | RNVC: 2

27 Jan 2022

3040-01-699-4216
Linear Actuating Cylinder Cap

016994216
CC49811-001: RNCC: 3 | RNVC: 2
CC49816-ITEM NO-6: RNCC: D | RNVC: 9

28 Jan 2022

3040-01-699-2769
Shouldered Shaft

016992769
54516-1: RNCC: 3 | RNVC: 2

21 Jan 2022

3040-01-699-2839
Remote Control Lever

016992839
725-8838998-A12: RNCC: 3 | RNVC: 2
LOA007264-A12: RNCC: 5 | RNVC: 2

21 Jan 2022

3040-01-698-1204
Piston Ring

016981204
101-32500: RNCC: 3 | RNVC: 2

29 Oct 2021

3040-01-698-1444
Straight Shaft

016981444
500K3744: RNCC: 3 | RNVC: 2
500K3744: RNCC: 5 | RNVC: 9

1 Nov 2021

3040-01-698-1068
Shouldered Shaft

016981068
6098167: RNCC: 3 | RNVC: 2

28 Oct 2021

3040-01-698-0626
Brake Arm

016980626
526191-1: RNCC: 3 | RNVC: 2
526191-1: RNCC: 5 | RNVC: 2
526191-1: RNCC: 5 | RNVC: 2
526191-1: RNCC: 5 | RNVC: 2

27 Oct 2021

3040-01-699-0142
Shouldered Shaft

016990142
00-306359: RNCC: 3 | RNVC: 2

31 Dec 2021

3040-01-147-5479
Straight Shaft

011475479
705722A00: RNCC: 3 | RNVC: 2
705722-A: RNCC: 5 | RNVC: 9

18 Feb 1983

3040-01-549-1408
Linear Actuating Cylinder Assembly

015491408
47922074: RNCC: 3 | RNVC: 2
139808A2: RNCC: 3 | RNVC: 9
48061323: RNCC: 5 | RNVC: 9

13 Mar 2007

3040-01-527-6851
Bevel Gear And Shaft Assembly

015276851
11581662: RNCC: 3 | RNVC: 2
SV.113.001.000: RNCC: 5 | RNVC: 2

11 Feb 2005

3040-01-700-1099
Ball Joint

017001099
23080251: RNCC: 3 | RNVC: 2

17 Mar 2022

3040-01-703-3192
Straight Shaft

017033192
709-4558093-PART-NO-30: RNCC: 3 | RNVC: 2
709-4403655-PART-NO-201: RNCC: C | RNVC: 1

30 Aug 2022

3040-01-705-3911
Shouldered Shaft

017053911
12661538: RNCC: 3 | RNVC: 2

19 Sep 2022

3040-01-691-4557
Linear Actuating Cylinder Assembly

016914557
936537: RNCC: 1 | RNVC: 2
1511088: RNCC: 3 | RNVC: 2
151208B: RNCC: 3 | RNVC: 2

9 Oct 2020

3040-01-710-4554
Nonaircraft Mechanical Actuator

017104554
0515S777128: RNCC: 3 | RNVC: 2
0515S777128: RNCC: 5 | RNVC: 2

31 May 2023

3040-01-710-6077
Shouldered Shaft

017106077
3031644-001: RNCC: 3 | RNVC: 2

10 Jun 2023

3040-01-710-6094
Counterbalance Weight

017106094
23087713-5: RNCC: 3 | RNVC: 2

10 Jun 2023

3040-01-710-6547
Nonaircraft Mechanical Actuator

017106547
12153/4-S794-100: RNCC: 3 | RNVC: 2

13 Jun 2023

3040-01-708-1918
Rigid Connecting Link

017081918
206-010-446-107: RNCC: 3 | RNVC: 2

21 Mar 2023

3040-01-709-1223
Rigid Connecting Link

017091223
65103-002: RNCC: 3 | RNVC: 2

12 May 2023

3040-01-708-2803
Straight Shaft

017082803
4240116-1: RNCC: 3 | RNVC: 2

27 Mar 2023

3040-01-708-2828
Shouldered Shaft

017082828
5204876-9: RNCC: 3 | RNVC: 2

27 Mar 2023

3040-01-708-2932
Ball Joint

017082932
007-008487: RNCC: 1 | RNVC: 2
007-008487-000: RNCC: 3 | RNVC: 2
KBRM-02-LS: RNCC: 5 | RNVC: 2

28 Mar 2023

3040-01-368-2117
Linear Actuating Cylinder Assembly

013682117
1HTMH000250023: RNCC: 3 | RNVC: 2
CYSR 3560 HY74T2B2508200100990: RNCC: 3 | RNVC: 9
1H000041611: RNCC: 5 | RNVC: 2
89156921: RNCC: 5 | RNVC: 9
S/N 89156922: RNCC: 5 | RNVC: 9
CYSR 3560 HY-74: RNCC: C | RNVC: 1
CYSR3560HY74T2B: RNCC: C | RNVC: 1

27 Nov 1992

3040-00-129-6137
Rigid Connecting Link

001296137
206-001-020-29: RNCC: 3 | RNVC: 2
206-001-020-029: RNCC: 5 | RNVC: 2

11 Dec 1968

3040-01-479-5122
Linear Actuating Cylinder

014795122
CB29097-001: RNCC: 3 | RNVC: 2
30078-41470 ITEM 10: RNCC: 5 | RNVC: 9
41460: RNCC: 5 | RNVC: 9
30096-41450 ITEM 10: RNCC: 5 | RNVC: 9
CC79491-001: RNCC: 5 | RNVC: 9
30078-41470: RNCC: D | RNVC: 9
30096-41450: RNCC: D | RNVC: 9

24 Oct 2000

3040-01-705-0067
Linear Actuating Cylinder Assembly

017050067
1H2H0A00266994: RNCC: 3 | RNVC: 2

12 Sep 2022

3040-01-703-1124
Shouldered Shaft

017031124
726-8838386-9: RNCC: 3 | RNVC: 2
LOA022279-9: RNCC: 5 | RNVC: 1
R5257864-9: RNCC: 5 | RNVC: 2
211016914: RNCC: 5 | RNVC: 2

17 Aug 2022

3040-00-383-6743
Shouldered Shaft

003836743
KMC-NB3094: RNCC: 3 | RNVC: 2
NC6107PC157: RNCC: 5 | RNVC: 9
NH7407PC157: RNCC: 5 | RNVC: 9
737127: RNCC: 5 | RNVC: 9
NH6714PC157: RNCC: 5 | RNVC: 9
157NC6107: RNCC: 5 | RNVC: 9
NB-3094REVC2: RNCC: 5 | RNVC: 9
737127: RNCC: 5 | RNVC: 9
737127: RNCC: 5 | RNVC: 9
737127: RNCC: C | RNVC: 1

1 Jan 1963

3040-01-705-3793
Transmission Range Clutch Hub

017053793
29546749: RNCC: 3 | RNVC: 2

16 Sep 2022

3040-01-703-3175
Body Hub

017033175
29388101: RNCC: 3 | RNVC: 2
69.67100-5003: RNCC: 5 | RNVC: 2
69.67100-5003: RNCC: 5 | RNVC: 2

30 Aug 2022

3040-01-703-1493
Linear Actuating Cylinder Assembly

017031493
1H2HXA00256032: RNCC: 3 | RNVC: 2

19 Aug 2022

3040-00-512-4974
Control Cam

005124974
5160348: RNCC: 3 | RNVC: 2
5124974: RNCC: 3 | RNVC: 2
6CFC2209: RNCC: 5 | RNVC: 2
104690H1: RNCC: 5 | RNVC: 2
2530005124974: RNCC: 5 | RNVC: 9
104690H1: RNCC: 5 | RNVC: 9
FC2209: RNCC: 5 | RNVC: 9
083940: RNCC: 5 | RNVC: 9
2847F136: RNCC: 5 | RNVC: 9
643238: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-036-3082
Thrust Bearing Shoe

000363082
43-8-2511-3: RNCC: 3 | RNVC: 2
N6021PC919: RNCC: 3 | RNVC: 2
462511BPC3T05: RNCC: 5 | RNVC: 2
462511CPC3T05: RNCC: 5 | RNVC: 2
462511MPC3T05: RNCC: 5 | RNVC: 2
N6040PC919: RNCC: 5 | RNVC: 2
463722PC4T06: RNCC: 5 | RNVC: 2
464083PC1T03: RNCC: 5 | RNVC: 2
H3113288PC919: RNCC: 5 | RNVC: 2
D010-223: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-162-5186
Manual Control Lever

001625186
A7556-001-259: RNCC: 3 | RNVC: 1
8721REVFPC19: RNCC: 5 | RNVC: 1
A7556.001.147: RNCC: 5 | RNVC: 2
9636PC19: RNCC: 5 | RNVC: 2
20277PC31: RNCC: 5 | RNVC: 2
20278PC31: RNCC: 5 | RNVC: 2
07556001259: RNCC: 5 | RNVC: 2
20235PC33: RNCC: 5 | RNVC: 9
20275PC31: RNCC: 5 | RNVC: 9
9636PC19: RNCC: 5 | RNVC: 9

5 Nov 1971

3040-01-702-0788
Straight Shaft

017020788
988-0304: RNCC: 3 | RNVC: 2

21 Jun 2022

3040-01-702-0505
Straight Shaft

017020505
12596845: RNCC: 3 | RNVC: 2

21 Jun 2022

3040-01-700-7194
Mechanical Power Transmission Equipment Installation Kit

017007194
308143: RNCC: 3 | RNVC: 2
315957: RNCC: D | RNVC: 9

11 Apr 2022

3040-01-701-0207
Linear Actuating Cylinder Assembly

017010207
1133715: RNCC: 3 | RNVC: 2

22 Apr 2022

3040-01-700-5300
Shaft Retaining Plate

017005300
06351-08265-102: RNCC: 3 | RNVC: 2

31 Mar 2022

3040-01-700-5408
Shaft Retaining Plate

017005408
06100-08580-103: RNCC: 3 | RNVC: 2

1 Apr 2022

3040-01-701-3767
Oil Distribution Box Shaft Assembly

017013767
4053078C1: RNCC: 3 | RNVC: 2

13 May 2022

3040-01-701-4128
Straight Shaft

017014128
251T0101-130: RNCC: 3 | RNVC: 1

16 May 2022

3040-01-701-4085
Shouldered Shaft

017014085
113T1216-4: RNCC: 3 | RNVC: 1

16 May 2022

3040-01-701-4534
Worm Wheel Gearshaft

017014534
506-30-34: RNCC: 3 | RNVC: 2
506-30-34: RNCC: 5 | RNVC: 9
241-8592072 REV C SHEET 2 OF 2: RNCC: D | RNVC: 9

17 May 2022

3040-01-701-4117
Straight Shaft

017014117
251T0100-118: RNCC: 3 | RNVC: 1

16 May 2022

3040-01-701-4741
Mechanically Actuated Spindle

017014741
1281-018: RNCC: 3 | RNVC: 2

18 May 2022

3040-01-699-5072
Linear Actuating Cylinder Cap

016995072
332/G3569: RNCC: 3 | RNVC: 2

4 Feb 2022

3040-01-697-7208
Shouldered Shaft

016977208
014-1420004-201: RNCC: 3 | RNVC: 2
999-1111-C-06 REV 1 ITEM NO. 14: RNCC: 5 | RNVC: 2

6 Oct 2021

3040-01-699-6682
Transmission Fluid Cooler

016996682
TDI-21161DC: RNCC: 3 | RNVC: 2
12562981: RNCC: 7 | RNVC: 2

16 Feb 2022

3040-01-699-8198
Nonaircraft Mechanical Actuator

016998198
322002-1: RNCC: 3 | RNVC: 2
DOCUMENT TTM-211-8 REV C: RNCC: 5 | RNVC: 1
322002 REV F: RNCC: 5 | RNVC: 2

28 Feb 2022

3040-01-699-5251
Piston Ring

016995251
373591-3451: RNCC: 3 | RNVC: 2

5 Feb 2022

3040-01-699-3028
Straight Shaft

016993028
373596-1: RNCC: 3 | RNVC: 2

22 Jan 2022

3040-01-700-7734
Bottom Assembly

017007734
8677748-001: RNCC: 3 | RNVC: 2

13 Apr 2022

3040-01-700-1451
Shouldered Shaft

017001451
457-4568: RNCC: 3 | RNVC: 2

18 Mar 2022

3040-01-699-3220
Shouldered Shaft

016993220
3392AS489-2: RNCC: 3 | RNVC: 2
3392AS489: RNCC: D | RNVC: 9

24 Jan 2022

3040-01-699-3493
Clutch Trunnion

016993493
185631: RNCC: 3 | RNVC: 2
20809078 REVISION C PIECE 1: RNCC: C | RNVC: 1
20809005: RNCC: D | RNVC: 9

25 Jan 2022

3040-01-700-8112
Linear Actuating Cylinder

017008112
RC-TTJ3: RNCC: 3 | RNVC: 9
RBT18640-7: RNCC: 5 | RNVC: 2

14 Apr 2022

3040-01-699-1812
Nonaircraft Mechanical Actuator

016991812
CTORVO-000290: RNCC: 3 | RNVC: 2
505-8787566 REV A (F9): RNCC: 5 | RNVC: 2
505-8787566 REV A: RNCC: D | RNVC: 9

13 Jan 2022

3040-01-700-8105
Shouldered Shaft

017008105
3392AS489-1: RNCC: 3 | RNVC: 2
3392AS489: RNCC: D | RNVC: 9

14 Apr 2022

3040-01-698-8158
Linear Actuating Cylinder Assembly

016988158
P011115: RNCC: 3 | RNVC: 2

10 Dec 2021

3040-01-700-3434
Belt-Chain Tension Adjusting Device

017003434
SS3LB-F63A29-B18PE: RNCC: 3 | RNVC: 2
4525013: RNCC: 7 | RNVC: 2

24 Mar 2022

3040-00-768-5381
Friction Lining

007685381
73-64-410: RNCC: 3 | RNVC: 2
316824PC118LNG: RNCC: 5 | RNVC: 2
313014PC118LNG: RNCC: 5 | RNVC: 2
3756-1PC15A-16A: RNCC: 5 | RNVC: 2
80239PC105: RNCC: 5 | RNVC: 2
313024PC118LNG: RNCC: 5 | RNVC: 2
3813-2PC15: RNCC: 5 | RNVC: 2
3814-2PC16: RNCC: 5 | RNVC: 2
3753-1PC15A-16A: RNCC: 5 | RNVC: 2
3724-1PC15-16: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-01-703-3646
Straight Shaft Assembly

017033646
5-13-10204-2: RNCC: 3 | RNVC: 2
5-13-10204: RNCC: D | RNVC: 9

1 Sep 2022

3040-01-705-3640
Straight Shaft

017053640
6-58986-2001: RNCC: 3 | RNVC: 2
6-58986: RNCC: D | RNVC: 9

16 Sep 2022

3040-00-768-3067
Rigid Connecting Link

007683067
3-13636-3: RNCC: 3 | RNVC: 2
3-13636-3: RNCC: 5 | RNVC: 2
3-13636-3: RNCC: 5 | RNVC: 2
3-13636-3: RNCC: 5 | RNVC: 2
3-13636-3: RNCC: 5 | RNVC: 2
3-13636-3: RNCC: 5 | RNVC: 2
3-13636-3: RNCC: 5 | RNVC: 2
3-13636-3: RNCC: 5 | RNVC: 2
3-13636-3: RNCC: 5 | RNVC: 9
3-13636-3: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-01-702-6724
Shaft Idler

017026724
187018-1: RNCC: 3 | RNVC: 2

19 Jul 2022

3040-01-702-7200
Nonaircraft Mechanical Actuator

017027200
12151/3-867-100: RNCC: 3 | RNVC: 2
12151/ REV C: RNCC: 5 | RNVC: 2

22 Jul 2022

3040-01-702-7657
Shouldered Shaft

017027657
4F53725-105A: RNCC: 3 | RNVC: 2

27 Jul 2022

3040-01-702-8131
Shouldered Shaft

017028131
187110-1: RNCC: 3 | RNVC: 2

30 Jul 2022

3040-01-703-3325
Shouldered Shaft

017033325
184707-1: RNCC: 3 | RNVC: 2

30 Aug 2022

3040-01-702-9043
Linear Actuating Cylinder Cap

017029043
184720-2: RNCC: 3 | RNVC: 2

4 Aug 2022

3040-01-703-3353
Shouldered Shaft

017033353
188025-1: RNCC: 3 | RNVC: 2

30 Aug 2022

3040-01-703-4460
Shouldered Shaft

017034460
184864-1: RNCC: 3 | RNVC: 2

7 Sep 2022

3040-01-656-6474
Shouldered Shaft

016566474
J622: RNCC: 3 | RNVC: 2
J20009-99: RNCC: 5 | RNVC: 2

12 Jul 2016

3040-01-669-1031
Rigid Connecting Link

016691031
62400-0017E02: RNCC: 3 | RNVC: 2
140443: RNCC: 3 | RNVC: 2
140443: RNCC: 5 | RNVC: 2
62400-0017E02: RNCC: 7 | RNVC: 2

20 Dec 2017

3040-01-699-3688
Mechanical Drive Housing Part

016993688
0056507: RNCC: 3 | RNVC: 2

26 Jan 2022

3040-01-699-6800
Nonaircraft Mechanical Actuator

016996800
016996795: RNCC: 3 | RNVC: 2

17 Feb 2022

3040-01-701-4600
Worm Wheel Gearshaft

017014600
506-30-33: RNCC: 3 | RNVC: 2
506-30-33: RNCC: 5 | RNVC: 9
241-8592072 REV C SHEET 2 OF 2: RNCC: D | RNVC: 9

17 May 2022

3040-01-700-6407
Shaft Retaining Plate

017006407
607989-18-EA: RNCC: 3 | RNVC: 2
801635-541 PIECE 6: RNCC: 5 | RNVC: 1
801635-541: RNCC: D | RNVC: 9

5 Apr 2022

3040-01-702-0649
Straight Shaft

017020649
988-0624: RNCC: 3 | RNVC: 2

21 Jun 2022

3040-01-701-0989
Shouldered Shaft

017010989
LR48113: RNCC: 3 | RNVC: 2

27 Apr 2022

3040-01-703-3975
Shaft Idler

017033975
184851-1: RNCC: 3 | RNVC: 2

3 Sep 2022

3040-01-703-2130
Straight Shaft

017032130
00-972938: RNCC: 3 | RNVC: 2

23 Aug 2022

3040-01-702-0842
Nonaircraft Mechanical Actuator

017020842
988-0804: RNCC: 3 | RNVC: 2

21 Jun 2022

3040-01-702-0404
Shouldered Shaft

017020404
12593915: RNCC: 3 | RNVC: 2

21 Jun 2022

3040-01-701-1501
Linear Actuating Cylinder Assembly

017011501
1134046: RNCC: 3 | RNVC: 2

29 Apr 2022

3040-01-701-1509
Spur Gearshaft

017011509
06393-10003-103: RNCC: 3 | RNVC: 2
06393-10003: RNCC: D | RNVC: 9

29 Apr 2022

3040-01-701-1543
Shouldered Axle

017011543
384: RNCC: 3 | RNVC: 2
1209500146: RNCC: 7 | RNVC: 2

29 Apr 2022

3040-01-701-4295
Shaft Idler

017014295
506-30-20: RNCC: 3 | RNVC: 2
241-8592072 REV C SHEET 1 OF 2: RNCC: D | RNVC: 9

16 May 2022

3040-01-701-3175
Radiator Pipe

017013175
4051356C1: RNCC: 3 | RNVC: 2

10 May 2022

3040-01-702-4287
Linear Actuating Cylinder Assembly

017024287
632181-1: RNCC: 3 | RNVC: 2

6 Jul 2022

3040-01-700-9141
Breather

017009141
BF-2113-SS: RNCC: 3 | RNVC: 2
12192-11 REV -P/N BF-2113-SS: RNCC: 3 | RNVC: 2
71881800 PL: RNCC: 5 | RNVC: 9
71881800 REV- POS 0033: RNCC: D | RNVC: 9

20 Apr 2022

3040-01-700-9376
Lever Fitting

017009376
2007653-2: RNCC: 3 | RNVC: 2
2007653: RNCC: D | RNVC: 9

21 Apr 2022

3040-01-699-8326
Shouldered Shaft

016998326
53711-310-8788850-5: RNCC: 3 | RNVC: 2
3108864069ITEM5: RNCC: 5 | RNVC: 2

1 Mar 2022

3040-01-700-7937
Helical Gearshaft

017007937
06353-08002-101: RNCC: 3 | RNVC: 2
06353-08002: RNCC: D | RNVC: 9

14 Apr 2022

3040-01-700-7150
Linear Actuating Cylinder Cap

017007150
06351-08091-101: RNCC: 3 | RNVC: 2

8 Apr 2022

3040-01-589-5476
Aft Starboard

015895476
1600903-9RC: RNCC: 3 | RNVC: 2
1600903-7: RNCC: 3 | RNVC: 2
1600903-9RC: RNCC: 5 | RNVC: 9

29 Oct 2010

3040-01-703-0392
Linear Actuating Cylinder Assembly Parts Kit

017030392
RG2HLG2131: RNCC: 3 | RNVC: 2

12 Aug 2022

3040-01-706-4349
Housing Adapter

017064349
5803122235: RNCC: 3 | RNVC: 2
R902038551: RNCC: 5 | RNVC: 2

23 Nov 2022

3040-01-707-5265
Bell Crank Support

017075265
74824-3: RNCC: 3 | RNVC: 2

7 Feb 2023

3040-01-705-9033
Rigid Connecting Link

017059033
251A1670-2: RNCC: 3 | RNVC: 2

20 Oct 2022

3040-01-706-2035
Shouldered Shaft Assembly

017062035
125329B-51: RNCC: 3 | RNVC: 2

8 Nov 2022

3040-01-706-4981
Remote Control Lever

017064981
4P-3134: RNCC: 3 | RNVC: 2

30 Nov 2022

3040-00-446-7551
Thrust Bearing Shoe

004467551
W5935773PC95: RNCC: 3 | RNVC: 2
9-2445-5: RNCC: 5 | RNVC: 2
T4973963PC120: RNCC: 5 | RNVC: 2
T5992990PC27: RNCC: 5 | RNVC: 2
W5329773PC72: RNCC: 5 | RNVC: 2
W5329790PC70: RNCC: 5 | RNVC: 2
W5938161PC28: RNCC: 5 | RNVC: 2
W5938162PC70: RNCC: 5 | RNVC: 2
W5938253PC82: RNCC: 5 | RNVC: 2
W5939495PC59: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-196-0877
Remote Con Assembly

011960877
176380 AND 176711: RNCC: 3 | RNVC: 2
393009: RNCC: 5 | RNVC: 2
393308: RNCC: 5 | RNVC: 2
395306: RNCC: 5 | RNVC: 2
393080: RNCC: 5 | RNVC: 2
397184: RNCC: 5 | RNVC: 2
391040: RNCC: 5 | RNVC: 2
175945: RNCC: 5 | RNVC: 9
397184: RNCC: 5 | RNVC: 9
393080: RNCC: 5 | RNVC: 9

7 Dec 1984

3040-01-707-8455
Mechanically Actuated Spindle

017078455
09024A3402: RNCC: 3 | RNVC: 2

25 Feb 2023

3040-01-707-5363
Shouldered Axle

017075363
36-115-109: RNCC: 3 | RNVC: 2
36-155-109: RNCC: 3 | RNVC: 2

8 Feb 2023

3040-01-707-2260
Linear Actuating Cylinder Assembly

017072260
HE63600-5: RNCC: 3 | RNVC: 2

24 Jan 2023

3040-01-707-3596
Straight Shaft Assembly

017073596
PAAF934514: RNCC: 3 | RNVC: 2
DAAF459402 REV -: RNCC: D | RNVC: 9

28 Jan 2023

3040-01-700-3095
Mechanically Actuated Spindle

017003095
1629AS107-1: RNCC: 3 | RNVC: 2
1629AS107-1: RNCC: 5 | RNVC: 1
1629AS107: RNCC: D | RNVC: 9

23 Mar 2022

3040-01-701-5089
Straight Shaft

017015089
506-40-1: RNCC: 3 | RNVC: 2
506-40-1: RNCC: 3 | RNVC: 9

19 May 2022

3040-01-705-6738
Shouldered Shaft

017056738
AC-C051-101D40: RNCC: 3 | RNVC: 2

4 Oct 2022

3040-01-705-8199
Tension Spring Assembly

017058199
7378044: RNCC: 3 | RNVC: 2

14 Oct 2022

3040-01-706-0331
Linear Actuating Cylinder Assembly

017060331
1619PDNA02: RNCC: 3 | RNVC: 2
12638935: RNCC: 7 | RNVC: 2

26 Oct 2022

3040-01-706-2037
Piston Ring

017062037
F.US316400.37.3: RNCC: 3 | RNVC: 2

8 Nov 2022

3040-01-706-2249
Linear Actuating Cylinder Piston

017062249
34503030C: RNCC: 3 | RNVC: 2

9 Nov 2022

3040-00-891-7815
Remote Control Lever

008917815
10870528: RNCC: 3 | RNVC: 2
2540008917815: RNCC: 6 | RNVC: 9

20 Jan 1967

3040-01-703-3701
Straight Shaft Assembly

017033701
5-13-10200-2: RNCC: 3 | RNVC: 2
5-13-10200: RNCC: D | RNVC: 9

1 Sep 2022

3040-01-703-0951
Linear Actuating Cylinder Assembly

017030951
9U-7532: RNCC: 3 | RNVC: 2

16 Aug 2022

3040-01-703-3942
Straight Shaft Assembly

017033942
5-13-10200-3: RNCC: 3 | RNVC: 2
5-13-10200-3: RNCC: 5 | RNVC: 2
5-13-10200: RNCC: D | RNVC: 9

2 Sep 2022

3040-01-353-0746
Push-Pull Control Assembly

013530746
410-M-3IN X 62IN LG: RNCC: 3 | RNVC: 2
211059461: RNCC: 5 | RNVC: 2
593-6405224 PIECE 88: RNCC: 5 | RNVC: 2
593-6405224-88: RNCC: 5 | RNVC: 2
410M003-063: RNCC: 5 | RNVC: 2
410-M-3-5-3: RNCC: 5 | RNVC: 2
211059461: RNCC: 5 | RNVC: 2
593-6405224 ITEM 88: RNCC: 5 | RNVC: 2
211037715: RNCC: 5 | RNVC: 2
593-6405225 PIECE 88: RNCC: 5 | RNVC: 2

5 Feb 1992

3040-01-308-5724
Rigid Connecting Link

013085724
7-311527035-41: RNCC: 3 | RNVC: 2
7-311527035-41: RNCC: 3 | RNVC: 9
7-311527035-29: RNCC: 5 | RNVC: 9
7-311527035-29: RNCC: 5 | RNVC: 9
7-311527035-25: RNCC: E | RNVC: 8
7-311527035-3: RNCC: E | RNVC: 8
7-311527035-11: RNCC: E | RNVC: 8

30 Sep 1989

3040-01-699-1799
Shouldered Shaft

016991799
2155-0238-1: RNCC: 3 | RNVC: 2

13 Jan 2022

3040-01-699-0863
Nonaircraft Mechanical Actuator

016990863
721-8618575-A1: RNCC: 3 | RNVC: 2
H861-5202-A1: RNCC: 5 | RNVC: 1
721-8618575: RNCC: D | RNVC: 9

6 Jan 2022

3040-01-699-0944
Straight Shaft

016990944
761686: RNCC: 3 | RNVC: 2

6 Jan 2022

3040-01-698-9916
Shouldered Shaft

016989916
00-848664: RNCC: 3 | RNVC: 2

28 Dec 2021

3040-01-699-3210
Remote Control Lever

016993210
725-8838998-A11: RNCC: 3 | RNVC: 2
LOA007264-A11: RNCC: 5 | RNVC: 2

24 Jan 2022

3040-01-699-3168
Remote Control Lever

016993168
725-8837478-A8: RNCC: 3 | RNVC: 2
LOA017170-A8: RNCC: 5 | RNVC: 2

24 Jan 2022

3040-01-698-3455
Multiple Gears Gearshaft

016983455
2-103-084-01: RNCC: 3 | RNVC: 2
2-103-084-01: RNCC: 5 | RNVC: 2
2-103-084-01 REV P FIND NO 1: RNCC: D | RNVC: 9

10 Nov 2021

3040-01-701-0462
Rigid Connecting Link

017010462
16200807-Q: RNCC: 3 | RNVC: 2
S9312-AH-MMA-020 FIG7-77,IDX64: RNCC: C | RNVC: 1

25 Apr 2022

3040-01-699-4176
Rigid Connecting Link

016994176
901-032-847-101: RNCC: 3 | RNVC: 2
901-032-847: RNCC: D | RNVC: 9

28 Jan 2022

NSN 3040-00-420-2016 004202016 SHOE,POSITIONING

3040-00-420-2016
Positioning Shoe

004202016
S5501-82: RNCC: 3 | RNVC: 2
S805GD: RNCC: 3 | RNVC: 2
SG1941PC33: RNCC: 3 | RNVC: 2
S805GD: RNCC: 5 | RNVC: 9
SG1732PC33: RNCC: 5 | RNVC: 9
SG1735PC33: RNCC: 5 | RNVC: 9
SG2050PC33: RNCC: 5 | RNVC: 9
SG2053PC33: RNCC: 5 | RNVC: 9
SG2070PC33: RNCC: 5 | RNVC: 9
SG1882PC33: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-152-2458
Mechanically Actuated Spindle

001522458
CO2306-001: RNCC: 3 | RNVC: 2
CO2306-001: RNCC: 3 | RNVC: 9
AC2306-1: RNCC: 5 | RNVC: 9
3N112PC72: RNCC: 5 | RNVC: 9
NN76PC72: RNCC: 5 | RNVC: 9
NN100PC72: RNCC: 5 | RNVC: 9
3N111PC72: RNCC: 5 | RNVC: 9
3N82PC72: RNCC: 5 | RNVC: 9
NN-19-1 SYMBOL 72: RNCC: 5 | RNVC: 9
NN84PC72: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-699-1567
Nonaircraft Mechanical Actuator

016991567
CTORVO-000297: RNCC: 3 | RNVC: 2
505-8787568 REV A (F6): RNCC: 5 | RNVC: 2
505-8787568 REV A: RNCC: D | RNVC: 9

12 Jan 2022

3040-01-698-9593
Remote Control Lever

016989593
4525179: RNCC: 3 | RNVC: 2

23 Dec 2021

3040-01-699-0168
Brake Arm

016990168
4089552: RNCC: 3 | RNVC: 2

3 Jan 2022

3040-01-699-0347
Linear Actuating Cylinder Assembly Parts Kit

016990347
LCS1500STR-001: RNCC: 3 | RNVC: 2

4 Jan 2022

3040-01-699-1506
Remote Control Lever

016991506
725-8837478-A7: RNCC: 3 | RNVC: 2
LOA017170-A7: RNCC: 5 | RNVC: 2

12 Jan 2022

3040-01-699-0130
Hydraulic Accumulator Cylinder

016990130
141661B: RNCC: 3 | RNVC: 2
141661B REV A: RNCC: 3 | RNVC: 9
P011110: RNCC: 5 | RNVC: 2

30 Dec 2021

3040-01-698-8642
Straight Shaft

016988642
194R-R7: RNCC: 3 | RNVC: 2
E-P1USU00044-0005/ ITEM 142: RNCC: 5 | RNVC: 1

16 Dec 2021

3040-01-699-9343
Mechanical Power Transmission Equipment Installation Kit

016999343
06017G1012-9: RNCC: 3 | RNVC: 2
06017G1012: RNCC: D | RNVC: 9

7 Mar 2022

3040-01-699-8313
Nonrotating Shaft Eye Bracket

016998313
628033-1: RNCC: 3 | RNVC: 2

1 Mar 2022

3040-01-698-8363
Nonvehicular Propeller Shaft

016988363
HC3Z-4R602-FT: RNCC: 3 | RNVC: 2
HC3Z-4R602-FT: RNCC: 5 | RNVC: 2

14 Dec 2021

3040-01-699-8562
Mechanically Actuated Spindle

016998562
SP002096 PC NO 37 DET 32-2A: RNCC: 3 | RNVC: 2
SP002096 PC NO 37 DET 32-2A: RNCC: 5 | RNVC: 2
SP002096: RNCC: D | RNVC: 9

2 Mar 2022

3040-01-699-3986
Extension Shaft

016993986
NT-5066-999-000: RNCC: 3 | RNVC: 2
5066-999-000: RNCC: 5 | RNVC: 2
5075 SHT 9 IT NO 14: RNCC: C | RNVC: 1
5075/REV C SHEET 9 FIND NO 14: RNCC: C | RNVC: 1

27 Jan 2022

3040-01-699-5748
Hydraulic Control Assembly

016995748
3031414-001: RNCC: 3 | RNVC: 2

9 Feb 2022

3040-01-698-6249
Shouldered Shaft

016986249
06371-05802-103: RNCC: 3 | RNVC: 2

30 Nov 2021

3040-01-698-4615
Nonrotating Shaft Eye Bracket

016984615
845-7526223-4-82: RNCC: 3 | RNVC: 1

18 Nov 2021

3040-01-699-3337
Linear Actuating Cylinder Assembly

016993337
3030720-001: RNCC: 3 | RNVC: 2

24 Jan 2022

3040-01-700-2980
Linear Actuating Cylinder Assembly

017002980
90837: RNCC: 3 | RNVC: 2

23 Mar 2022

3040-00-477-8177
Speedometer-Tachometer Drive Adapter

004778177
2290417: RNCC: 3 | RNVC: 2

11 May 1970

3040-01-554-4254
Hydraulic Control Assembly

015544254
209-076-039-107: RNCC: 1 | RNVC: 3
2-7343-17: RNCC: 3 | RNVC: 3
209-076-039: RNCC: 5 | RNVC: 3

9 Aug 2007

3040-00-364-3829
Straight Shaft

003643829
3230625: RNCC: 3 | RNVC: 2
81125S41-21161PC3: RNCC: 5 | RNVC: 9
DD453S61-01318PC2: RNCC: 5 | RNVC: 9
81125S41-35361PC3: RNCC: 5 | RNVC: 9
SS198S41-0597PC2: RNCC: 5 | RNVC: 9
SS198S41-597PC2: RNCC: 5 | RNVC: 9
SS212S41-0596PC2: RNCC: 5 | RNVC: 9
DD445S6100-887PC2: RNCC: 5 | RNVC: 9
DD453S61-01318PC2: RNCC: 5 | RNVC: 9
SS212S41-0596PC2: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-363-5103
Straight Shaft

003635103
7AF9B80A1PC24: RNCC: 3 | RNVC: 2
536159A: RNCC: 3 | RNVC: 2
010327: RNCC: 5 | RNVC: 2
SS185S41-0139PC12: RNCC: 5 | RNVC: 9
SS188S41-0592PC12: RNCC: 5 | RNVC: 9
YT128S41-01061PC12: RNCC: 5 | RNVC: 9
SS228S41-0551PC12: RNCC: 5 | RNVC: 9
YT145S41-0143PC12: RNCC: 5 | RNVC: 9
YT215S4105-574929PC4: RNCC: 5 | RNVC: 9
YT215S4105-574930PC4: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-642-2571
Electrical Actuator

016422571
LINE 02-268-XH-XT-42441: RNCC: 3 | RNVC: 2
LINE 01-GSX50-0601-XXX-AB2-: RNCC: 3 | RNVC: 2
42441: RNCC: 3 | RNVC: 2

19 Feb 2015

3040-00-837-2630
Hub Clamp

008372630
BC187: RNCC: 3 | RNVC: 2
S3433Y-C147-2: RNCC: 3 | RNVC: 2
3000088001: RNCC: 3 | RNVC: 2
S3433Y-C147-2: RNCC: 3 | RNVC: 2
918335-1: RNCC: 5 | RNVC: 2
10545435-1: RNCC: 5 | RNVC: 2
531202-1: RNCC: 5 | RNVC: 2
193134-1: RNCC: 5 | RNVC: 2
CG81: RNCC: 5 | RNVC: 2
210867: RNCC: 5 | RNVC: 2

15 Sep 1967

3040-00-865-3074
Mechanical Drive Housing

008653074
10902183: RNCC: 3 | RNVC: 2
2520008653074: RNCC: 5 | RNVC: 9

16 Oct 1967

3040-01-550-5627
Linear Actuating Cylinder Assembly

015505627
9241460001: RNCC: 3 | RNVC: 2
MP-0002722G: RNCC: 3 | RNVC: 2
CV146804: RNCC: 5 | RNVC: 2
924146.0001: RNCC: 5 | RNVC: 2
924146.0001: RNCC: 5 | RNVC: 2

24 Apr 2007

3040-01-543-8817
Straight Shaft

015438817
342-7067322-47: RNCC: 3 | RNVC: 1
342-7067322-48: RNCC: 5 | RNVC: 1
342-7067322-61: RNCC: 5 | RNVC: 1
H643-7003-48: RNCC: 5 | RNVC: 1
H643-7003-60: RNCC: 5 | RNVC: 1
H643-7003-61: RNCC: 5 | RNVC: 1
H643-7003-47: RNCC: 5 | RNVC: 1
342-7067322-48L1: RNCC: 5 | RNVC: 1
342-7067322-61L1: RNCC: 5 | RNVC: 1
H643-7003-48L1: RNCC: 5 | RNVC: 1

25 Sep 2006

3040-01-555-1057
Sun Gear

015551057
7T9272: RNCC: 3 | RNVC: 2
7T-9272: RNCC: 5 | RNVC: 2

29 Aug 2007

3040-00-678-1336
Manual Control Lever

006781336
8754065: RNCC: 3 | RNVC: 2
Z-378-X: RNCC: 5 | RNVC: 2
2520006781336: RNCC: 5 | RNVC: 9

15 May 1970

3040-01-604-6772
Planetary Gears Carrier

016046772
PSK2ASBC-III-20:1 WS3134: RNCC: 3 | RNVC: 2
PSK2ASBC-20.1-00-S 3134 POS:015: RNCC: 5 | RNVC: 9
41504.010070: RNCC: 5 | RNVC: 9

11 Apr 2012

3040-01-703-2132
Gearbox Parts Kit

017032132
00-973459: RNCC: 3 | RNVC: 2

23 Aug 2022

3040-01-701-4079
Rigid Connecting Link

017014079
113T1232-6: RNCC: 3 | RNVC: 1

16 May 2022

3040-01-702-6941
Shouldered Shaft

017026941
184887-1: RNCC: 3 | RNVC: 2

20 Jul 2022

3040-01-702-8459
Rigid Connecting Link

017028459
187293-1: RNCC: 3 | RNVC: 2

1 Aug 2022

3040-01-700-8856
Bevel Gearshaft

017008856
06351-08255-103: RNCC: 3 | RNVC: 2

19 Apr 2022

3040-01-702-6569
Breather

017026569
FB-10-04-00-0: RNCC: 3 | RNVC: 2

19 Jul 2022

3040-01-702-6568
Manual Control Lever

017026568
B2016(SPC): RNCC: 3 | RNVC: 1
D60-2.5-000ITEM35: RNCC: 5 | RNVC: 1

19 Jul 2022

3040-01-700-9121
Piston Ring

017009121
010417: RNCC: 3 | RNVC: 2
71881800 REV- POS 0023: RNCC: D | RNVC: 9
71881800 PL: RNCC: D | RNVC: 9

20 Apr 2022

3040-01-702-7042
Rotary Actuating Cylinder Assembly

017027042
341B11210PF2409-101: RNCC: 3 | RNVC: 2

21 Jul 2022

3040-01-703-1472
Ball Joint

017031472
2894750: RNCC: 3 | RNVC: 2

19 Aug 2022

3040-01-701-2157
Nonaircraft Mechanical Actuator

017012157
167-8483300-PN-A5: RNCC: 3 | RNVC: 1
167-8483300-PN-A5L1: RNCC: 5 | RNVC: 2
E541-0252-PN-A5: RNCC: 5 | RNVC: 2
E541-0252-PN-A5L1: RNCC: 5 | RNVC: 2

4 May 2022

3040-01-701-1624
Shaft Collar

017011624
001-140094-000: RNCC: 3 | RNVC: 2

2 May 2022

3040-01-701-0971
Straight Shaft

017010971
113T1216-3: RNCC: 3 | RNVC: 1

26 Apr 2022

3040-01-701-6646
Spur Gearshaft

017016646
506-30-1: RNCC: 3 | RNVC: 2
506-30-1: RNCC: 3 | RNVC: 9

31 May 2022

3040-01-701-6369
Straight Shaft

017016369
251T0101-118: RNCC: 3 | RNVC: 1

27 May 2022

3040-01-700-6815
Linear Actuating Cylinder Piston

017006815
2003113-1: RNCC: 3 | RNVC: 2

6 Apr 2022

3040-01-701-4202
Spur Gearshaft

017014202
10836859-001: RNCC: 3 | RNVC: 2

16 May 2022

3040-01-701-5026
Manual Control Lever

017015026
506-55-1: RNCC: 3 | RNVC: 2
506-55-1: RNCC: 5 | RNVC: 9

19 May 2022

3040-01-701-4556
Shouldered Shaft

017014556
8287953: RNCC: 3 | RNVC: 2
8287954: RNCC: D | RNVC: 9

17 May 2022

3040-01-700-7113
Controllable Swashplate

017007113
SB1570-101: RNCC: 3 | RNVC: 2

8 Apr 2022

3040-01-700-6885
Housing Adapter

017006885
R932001917: RNCC: 3 | RNVC: 2

7 Apr 2022

3040-01-701-4121
Straight Shaft

017014121
251T0101-129: RNCC: 3 | RNVC: 1

16 May 2022

3040-01-701-6262
Rigid Connecting Link

017016262
96350-08: RNCC: 3 | RNVC: 2
49-12-01 REV 0: RNCC: D | RNVC: 9
49-12-01 FIG 5: RNCC: D | RNVC: 9

26 May 2022

3040-01-701-6863
Linear Actuating Cylinder Assembly

017016863
8M0050097: RNCC: 3 | RNVC: 2
8M0184533: RNCC: 5 | RNVC: 9

1 Jun 2022

3040-01-686-3869
Straight Shaft

016863869
8605451-5: RNCC: 3 | RNVC: 2
8605451: RNCC: 5 | RNVC: 9
8605451: RNCC: 5 | RNVC: 9
8605449: RNCC: D | RNVC: 9

12 Feb 2020

3040-01-277-0315
Straight Shaft

012770315
13228E6095: RNCC: 3 | RNVC: 2
12644200: RNCC: 5 | RNVC: 2
BS.2318.00.00.064: RNCC: 5 | RNVC: 9
BS.2435.00.00.051: RNCC: 5 | RNVC: 9

16 Apr 1988

3040-01-714-4055

017144055
845-7286649-47: RNCC: 3 | RNVC: 2
845-7286649: RNCC: D | RNVC: 9

3040-01-714-6154

017146154
512-8839672-6-4: RNCC: 3 | RNVC: 2
R6432612-6-4: RNCC: 5 | RNVC: 2
LSA00504-6-4: RNCC: 5 | RNVC: 2
LSA00504: RNCC: D | RNVC: 9

3040-01-713-7738

017137738
198873-001: RNCC: 3 | RNVC: 2
169779: RNCC: D | RNVC: 9

3040-01-713-6180

017136180
8199175: RNCC: 3 | RNVC: 2
05171464: RNCC: 5 | RNVC: 2

3040-01-342-0963
Friction Lining

013420963
B-15162-1: RNCC: 3 | RNVC: 2
JB1516201: RNCC: 3 | RNVC: 2
B-15162-1: RNCC: 3 | RNVC: 9

16 Jul 1991

3040-00-363-7507
Mechanical Drive Housing

003637507
5190358: RNCC: 3 | RNVC: 9
18595PCX9093: RNCC: 5 | RNVC: 9
X8708APCX9093: RNCC: 5 | RNVC: 9
17834PCX9093: RNCC: 5 | RNVC: 9
17994PCX9093: RNCC: 5 | RNVC: 9
X9093: RNCC: 5 | RNVC: 9
KX9093: RNCC: 5 | RNVC: 9
5190358: RNCC: 5 | RNVC: 9
17996PCX9093: RNCC: 5 | RNVC: 9
MG150PCX9093: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-353-1663
Pawl

003531663
0396071: RNCC: 3 | RNVC: 9
202470: RNCC: 5 | RNVC: 9
327398: RNCC: 5 | RNVC: 9
396071: RNCC: 5 | RNVC: 9
202470: RNCC: 5 | RNVC: 9
327398: RNCC: 5 | RNVC: 9
396071: RNCC: 5 | RNVC: 9
396071: RNCC: 5 | RNVC: 9
0396071: RNCC: 5 | RNVC: 9
0396071: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-385-9484
Worm Shaft

003859484
W65N-8X1: RNCC: 3 | RNVC: 9
1503397: RNCC: 5 | RNVC: 2
1503397: RNCC: 5 | RNVC: 2
700148PC98: RNCC: 5 | RNVC: 9
G7851PC98: RNCC: 5 | RNVC: 9
G9682PC98: RNCC: 5 | RNVC: 9
G9684PC98: RNCC: 5 | RNVC: 9
G7856PC98: RNCC: 5 | RNVC: 9
26J295PC108: RNCC: 5 | RNVC: 9
700405PC98: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-703-2203
Linear Actuating Cylinder Assembly

017032203
CPN362-TW-4: RNCC: 3 | RNVC: 1

24 Aug 2022

3040-01-700-0199
Linear Actuating Cylinder Assembly

017000199
12680030: RNCC: 3 | RNVC: 2
12680030: RNCC: 5 | RNVC: 2

11 Mar 2022

3040-01-700-7399
Linear Actuating Cylinder Piston Rod

017007399
201460: RNCC: 3 | RNVC: 2
313409: RNCC: D | RNVC: 9

12 Apr 2022

3040-01-700-9013
Rotary Actuating Cylinder Assembly

017009013
341B11001PF1442-203: RNCC: 3 | RNVC: 2

19 Apr 2022

3040-01-699-5138
Belt-Chain Tension Adjusting Device

016995138
119798-01280: RNCC: 3 | RNVC: 2

4 Feb 2022

3040-01-705-3321
Lens Screen

017053321
12424-1000100: RNCC: 3 | RNVC: 2
12424-10-001000: RNCC: 5 | RNVC: 2
12424-1000100: RNCC: 5 | RNVC: 9

14 Sep 2022

3040-01-707-0416
Shouldered Shaft

017070416
208563PC1(SE): RNCC: 3 | RNVC: 1

11 Jan 2023

3040-01-708-6266
Control Cam

017086266
MC21089: RNCC: 3 | RNVC: 2

13 Apr 2023

3040-01-701-4559
Grease Cap

017014559
2519529C91: RNCC: 3 | RNVC: 2
3531209C91: RNCC: 5 | RNVC: 9

17 May 2022

3040-01-711-0642
Shouldered Shaft

017110642
X272: RNCC: 3 | RNVC: 2

18 Jul 2023

3040-01-710-8465
Linear Actuating Cylinder

017108465
BC3Z-16C826-B: RNCC: 3 | RNVC: 2
BC3Z-16C826-B: RNCC: 5 | RNVC: 2

29 Jun 2023

3040-00-149-2515
Shouldered Shaft

001492515
99121609: RNCC: 3 | RNVC: 2
A1338PC55: RNCC: 5 | RNVC: 2
A1354MP55: RNCC: 5 | RNVC: 2
A1250PC55: RNCC: 5 | RNVC: 2
A1353MP55: RNCC: 5 | RNVC: 2
A1353MPC55: RNCC: 5 | RNVC: 2
A1232PC69: RNCC: 5 | RNVC: 2
A1736MPC55: RNCC: 5 | RNVC: 2
A1249PC55: RNCC: 5 | RNVC: 2
A1354MPC55: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-01-710-8585
Worm Shaft

017108585
845-8617288-8: RNCC: 3 | RNVC: 2
2644-635-10-8: RNCC: C | RNVC: 1
845-8617288: RNCC: D | RNVC: 9

30 Jun 2023

3040-01-710-7904
Counterbalance Weight

017107904
12640138: RNCC: 3 | RNVC: 2
12640138: RNCC: 5 | RNVC: 2

26 Jun 2023

3040-01-701-6657
Shouldered Shaft

017016657
506-40-4: RNCC: 3 | RNVC: 2

31 May 2022

3040-01-669-1040
Rigid Connecting Link

016691040
140577: RNCC: 3 | RNVC: 2
140577: RNCC: 5 | RNVC: 2
1972: RNCC: 5 | RNVC: 2
62400-0018E02: RNCC: 5 | RNVC: 9
62400-0018E02: RNCC: 7 | RNVC: 2

20 Dec 2017

3040-01-711-0178
Housing Adapter

017110178
206-040-129-001: RNCC: 3 | RNVC: 2

14 Jul 2023

3040-01-711-0109
Tension Spring Assembly

017110109
206-040-382-101: RNCC: 3 | RNVC: 2

14 Jul 2023

3040-01-700-1089
Brake Disc

017001089
36041948: RNCC: 3 | RNVC: 2

17 Mar 2022

3040-01-558-2793
Pneumatic Actuator Cylinder Housing

015582793
V2D10646-7NA: RNCC: 3 | RNVC: 1
V1E10203 ITEM 13: RNCC: 5 | RNVC: 1
V1E10203 ITEM 13Q3: RNCC: 5 | RNVC: 2
V2D10646-7NAQ3: RNCC: 5 | RNVC: 2

3 Nov 2007

3040-00-481-9471
Speedometer-Tachometer Drive Adapter

004819471
02261-0112: RNCC: 3 | RNVC: 2
ES649AB: RNCC: 5 | RNVC: 9
02261-0112: RNCC: 5 | RNVC: 9

14 Sep 1970

3040-01-600-6225
Pneumatic Actuator Cylinder Housing

016006225
5078-10: RNCC: 1 | RNVC: 2
10616: RNCC: 3 | RNVC: 2

12 Dec 2011

3040-01-689-1339
Control Cam

016891339
65B82752-2: RNCC: 3 | RNVC: 1

6 Jun 2020

3040-01-685-0943
Rigid Connecting Link

016850943
140T2975-1: RNCC: 3 | RNVC: 2

30 Nov 2019

3040-01-678-7663
Rigid Connecting Link

016787663
370208-3: RNCC: 3 | RNVC: 2

25 Feb 2019

3040-01-667-5993
Shouldered Shaft

016675993
14001886: RNCC: 3 | RNVC: 2

24 Oct 2017

3040-01-661-5555
Rigid Connecting Link

016615555
91-0627-3: RNCC: 3 | RNVC: 1

7 Mar 2017

3040-01-661-4069
Rigid Connecting Link

016614069
251T0100Y1417: RNCC: 3 | RNVC: 1

1 Mar 2017

3040-01-661-3311
Control Cam

016613311
251T2252-8: RNCC: 3 | RNVC: 1

27 Feb 2017

3040-01-660-5763
Grease Cap

016605763
040290-000: RNCC: 3 | RNVC: 2
P50415 ITEM 6: RNCC: 5 | RNVC: 2

25 Jan 2017

3040-01-659-1986
Hydraulic Control Assembly

016591986
12578158-1: RNCC: 3 | RNVC: 2

9 Nov 2016

3040-01-658-5475
Straight Shaft

016585475
4F73602-101A: RNCC: 3 | RNVC: 2

3 Oct 2016

3040-01-656-2577
Cable Com Shaft Assy

016562577
257T4323-1: RNCC: 3 | RNVC: 1

22 Jun 2016

3040-01-655-7154
Straight Shaft Assembly

016557154
125329AH-71: RNCC: 3 | RNVC: 1

6 Jun 2016

3040-01-655-7145
Straight Shaft Assembly

016557145
125329AH-1: RNCC: 3 | RNVC: 1

6 Jun 2016

3040-01-655-7150
Straight Shaft Assembly

016557150
125329AH-70: RNCC: 3 | RNVC: 1

6 Jun 2016

3040-01-655-6602
Shaft Collar

016556602
125329AM-72: RNCC: 3 | RNVC: 1

4 Jun 2016

3040-01-655-6219
Shaft Collar

016556219
125329BB-69: RNCC: 3 | RNVC: 1

2 Jun 2016

3040-01-655-2689
Pawl

016552689
86398-13: RNCC: 3 | RNVC: 1

23 May 2016

3040-01-654-3743
Pawl

016543743
86399-14: RNCC: 3 | RNVC: 1

26 Apr 2016

3040-01-654-3330
Shouldered Shaft

016543330
80471-16: RNCC: 3 | RNVC: 1

25 Apr 2016

3040-01-654-3263
Shouldered Shaft

016543263
80471-10: RNCC: 3 | RNVC: 1

25 Apr 2016

3040-01-654-2118
Straight Shaft

016542118
80471-26: RNCC: 3 | RNVC: 1

20 Apr 2016

3040-01-654-2411
Pawl

016542411
86398-14: RNCC: 3 | RNVC: 1

22 Apr 2016

3040-01-654-1054
Pawl

016541054
86399-13: RNCC: 3 | RNVC: 1

18 Apr 2016

3040-01-654-0420
Spur Gearshaft

15 Apr 2016

3040-01-652-7822
Spur Gearshaft

016527822
67411645-1: RNCC: 3 | RNVC: 2

3 Mar 2016

3040-01-651-2745
Disc Brake Caliper

016512745
00-23577: RNCC: 3 | RNVC: 2

12 Jan 2016

3040-01-651-0373
Nonaircraft Mechanical Actuator

016510373
4212755: RNCC: 1 | RNVC: 2
08899521: RNCC: 3 | RNVC: 2

30 Dec 2015

3040-01-648-9872
Transmissio Housing

016489872
12446546: RNCC: 3 | RNVC: 2

14 Oct 2015

3040-01-648-9808
Mechanical Drive Housing

016489808
12446547: RNCC: 3 | RNVC: 2

14 Oct 2015

3040-01-648-9621
Mechanical Drive Housing Part

016489621
12446612: RNCC: 3 | RNVC: 2

13 Oct 2015

3040-01-648-9693
Single Disk Brake

016489693
12446555: RNCC: 3 | RNVC: 2

13 Oct 2015

3040-01-648-9616
Mechanical Drive Housing Part

016489616
12446614: RNCC: 3 | RNVC: 2

13 Oct 2015

3040-01-648-9558
Carrier Assy Output

016489558
12446571: RNCC: 3 | RNVC: 2

13 Oct 2015

3040-01-648-4701
Mechanically Actuated Spindle

016484701
12446484: RNCC: 3 | RNVC: 2

25 Sep 2015

3040-01-648-4710
Mechanical Drive Housing

016484710
12446395: RNCC: 3 | RNVC: 2

25 Sep 2015

3040-01-648-4705
Mechanical Drive Housing

016484705
12446396: RNCC: 3 | RNVC: 2

25 Sep 2015

3040-01-648-4764
Bevel Gearshaft

016484764
0950220000: RNCC: 3 | RNVC: 2
SKD168962 ITEM 71: RNCC: 5 | RNVC: 2
SKD168962: RNCC: D | RNVC: 9

25 Sep 2015

3040-01-648-2498
Mechanical Drive Housing

19 Sep 2015

3040-01-648-2502
Mechanical Drive Housing

19 Sep 2015

3040-01-648-1447
Planetary Gears Carrier

16 Sep 2015

3040-01-648-1441
Mechanical Drive Housing

16 Sep 2015

3040-01-648-1451
Mechanical Drive Housing

16 Sep 2015

3040-01-647-3954
Linear Actuating Cylinder

20 Aug 2015

3040-01-646-7048
Pivot Shaft Assembly

016467048
187721-2: RNCC: 3 | RNVC: 2

29 Jul 2015

3040-01-645-5759
Worm Shaft

22 Jun 2015

3040-01-644-9408
Straight Shaft

016449408
13047895: RNCC: 3 | RNVC: 1

27 May 2015

3040-01-644-5021
Shouldered Shaft Assembly

016445021
06282361: RNCC: 3 | RNVC: 2

8 May 2015

3040-01-643-9515
Nonaircraft Mechanical Actuator

016439515
12578123: RNCC: 3 | RNVC: 2

16 Apr 2015

3040-01-643-8606
Lever

016438606
1281-006-3IN ITEM 3: RNCC: 3 | RNVC: 2

14 Apr 2015

3040-01-643-0618
Remote Control Lever

18 Mar 2015

3040-01-641-9353
Shouldered Shaft

016419353
709-5343962 ITEM 047: RNCC: 3 | RNVC: 1
709-5486669 ITEM 047: RNCC: 5 | RNVC: 1
709-5343962 ITEM 047D4: RNCC: 5 | RNVC: 2
709-5486669 ITEM 047D4: RNCC: 5 | RNVC: 2

6 Feb 2015

3040-01-641-6762
Shaft Retaining Plate

016416762
709-5486669 ITEM 109: RNCC: 3 | RNVC: 1
709-5486669 ITEM 109D4: RNCC: 5 | RNVC: 2

29 Jan 2015

3040-01-632-6973
Pneumatic Wheel Assy

016326973
1600901-7: RNCC: 3 | RNVC: 2

28 Oct 2014

3040-01-632-0632
Brake Disc

016320632
14004738: RNCC: 3 | RNVC: 2

7 Oct 2014

3040-01-632-0173
Spring Cartridge

016320173
14004718: RNCC: 3 | RNVC: 2

3 Oct 2014

3040-01-632-0140
Control Cam

016320140
14004716: RNCC: 3 | RNVC: 2

3 Oct 2014

3040-01-630-9269
Straight Shaft

016309269
10650994: RNCC: 3 | RNVC: 2

22 Aug 2014

3040-01-630-6753
Worm Shaft

016306753
235975: RNCC: 3 | RNVC: 2
132698ITEM004: RNCC: 5 | RNVC: 2

13 Aug 2014

3040-01-630-2218
Straight Shaft

016302218
14001139: RNCC: 3 | RNVC: 2

29 Jul 2014

3040-01-629-3140
Flexible Drive Shaft

016293140
14003578: RNCC: 3 | RNVC: 2
14003578: RNCC: 3 | RNVC: 9

25 Jun 2014

3040-01-628-9414
Nonaircraft Mechanical Actuator

16 Jun 2014

3040-01-628-5228
Linear Actuating Cylinder Assembly

016285228
HC-1683-01: RNCC: 3 | RNVC: 2

29 May 2014

3040-01-627-2070
Nonaircraft Mechanical Actuator

016272070
442261: RNCC: 3 | RNVC: 2
4087977: RNCC: 5 | RNVC: 2

5 Apr 2014

3040-01-627-2069
Nonaircraft Mechanical Actuator

016272069
442260: RNCC: 3 | RNVC: 2
4087978: RNCC: 5 | RNVC: 2

5 Apr 2014

3040-01-627-1555
Shaft Collar

016271555
1043300-001: RNCC: 3 | RNVC: 2

3 Apr 2014

3040-01-626-9297
Control Cam

016269297
12285494-2: RNCC: 3 | RNVC: 2

25 Mar 2014

3040-01-626-7852
Flexible Drive Shaft

016267852
14002186: RNCC: 3 | RNVC: 2
14002186: RNCC: 3 | RNVC: 9

20 Mar 2014

3040-01-626-3969
Shouldered Shaft

016263969
845-4558718ITEM1: RNCC: 3 | RNVC: 1
2642-343-03ITEM1: RNCC: 5 | RNVC: 1

8 Mar 2014

3040-01-626-2803
Shouldered Shaft

016262803
111P0510: RNCC: 3 | RNVC: 2
111P0510: RNCC: 5 | RNVC: 2

5 Mar 2014

3040-01-626-2654
Shouldered Shaft

016262654
364438-4: RNCC: 3 | RNVC: 2

4 Mar 2014

3040-01-624-9301
Trim Tab

016249301
BATTS: RNCC: 3 | RNVC: 2

17 Jan 2014

3040-01-624-7705
Rigid Connecting Link

016247705
DJ1608: RNCC: 3 | RNVC: 2

15 Jan 2014

3040-01-624-5375
Rigid Connecting Link

7 Jan 2014

3040-01-624-5378
Piston Ring

7 Jan 2014

3040-01-623-0953
Mechanical Drive Housing

016230953
74A670222-1001: RNCC: 3 | RNVC: 2

31 Oct 2013

3040-01-623-0459
Ballscrew Assembly

016230459
1606116-1: RNCC: 3 | RNVC: 2

30 Oct 2013

3040-01-621-5162
Air Motor Rear End Plate

016215162
114P8074-9: RNCC: 3 | RNVC: 2

10 Sep 2013

3040-01-621-5161
Air Motor Rear End Plate

016215161
114P8074-7: RNCC: 3 | RNVC: 2

10 Sep 2013

3040-01-621-5127
Air Motor Rear End Plate

016215127
114P8074-14: RNCC: 3 | RNVC: 2

10 Sep 2013

3040-01-621-5120
Air Motor Rear End Plate

016215120
114P8074-10: RNCC: 3 | RNVC: 2

10 Sep 2013

3040-01-621-5122
Air Motor Rear End Plate

016215122
114P8074-13: RNCC: 3 | RNVC: 2

10 Sep 2013

3040-01-619-5120
Shouldered Shaft

016195120
10651008: RNCC: 3 | RNVC: 2

4 Jun 2013

3040-01-619-5123
Shouldered Shaft

016195123
10650991: RNCC: 3 | RNVC: 2

4 Jun 2013

3040-01-619-2169
Rigid Connecting Link

016192169
29507783: RNCC: 3 | RNVC: 2
AS04-360: RNCC: D | RNVC: 9

22 May 2013

3040-01-617-9553
Straight Axle

016179553
S0018: RNCC: 3 | RNVC: 2

9 Apr 2013

3040-01-617-7003
Friction Lining

016177003
511639: RNCC: 3 | RNVC: 2

1 Apr 2013

3040-01-616-2025
Shouldered Shaft

016162025
376-9995: RNCC: 3 | RNVC: 9

5 Feb 2013

3040-01-616-1130
Lever Fitting

016161130
1562486-106: RNCC: 3 | RNVC: 2

1 Feb 2013

3040-01-616-0987
Friction Lining Material

016160987
3J-283617: RNCC: 3 | RNVC: 2

1 Feb 2013

3040-01-616-0181
Mechanical Drive Housing

29 Jan 2013

3040-01-615-7279
Ball Joint

016157279
55002974: RNCC: 3 | RNVC: 2

22 Jan 2013

3040-01-615-7203
Rigid Connecting Link

016157203
66-8342-2: RNCC: 3 | RNVC: 2

22 Jan 2013

3040-01-615-6905
Shouldered Shaft

016156905
43013151: RNCC: 3 | RNVC: 2

18 Jan 2013

3040-01-614-3912
Manual Control Lever Assembly

016143912
6589983: RNCC: 3 | RNVC: 2

4 Dec 2012

3040-01-613-6346
Mechanical Drive Housing

016136346
5-84049-3047: RNCC: 3 | RNVC: 2

13 Nov 2012

3040-01-613-6345
Mechanical Drive Housing

016136345
5-84049-3048: RNCC: 3 | RNVC: 2

13 Nov 2012

3040-01-613-4008
Shouldered Shaft

016134008
65-40091-7: RNCC: 3 | RNVC: 2

6 Nov 2012

3040-01-613-4009
Shouldered Shaft

016134009
65-40091-6: RNCC: 3 | RNVC: 2

6 Nov 2012

3040-01-613-3992
Remote Control Lever

016133992
65-20863-8: RNCC: 3 | RNVC: 2

6 Nov 2012

3040-01-613-1875
Actuator Lever

016131875
305-765-101-0: RNCC: 3 | RNVC: 2

1 Nov 2012

3040-01-611-7009
Manual Control Lever Assembly

016117009
12522325: RNCC: 3 | RNVC: 2

24 Sep 2012

3040-01-611-3875
Ball Joint

016113875
K8695T: RNCC: 3 | RNVC: 2
CCH K8695T: RNCC: 5 | RNVC: 2
55000932: RNCC: 7 | RNVC: 2

12 Sep 2012

3040-01-611-1993
Manual Control Lever

016111993
43019470: RNCC: 3 | RNVC: 2
55001924: RNCC: 5 | RNVC: 9

7 Sep 2012

3040-01-611-0682
Ball Joint

016110682
6058K25: RNCC: 3 | RNVC: 2

5 Sep 2012

3040-01-610-8876
Rigid Connecting Link

016108876
073400111: RNCC: 3 | RNVC: 2

29 Aug 2012

3040-01-610-6019
Ball Joint

016106019
K80014: RNCC: 3 | RNVC: 2
500 1097CQ: RNCC: 5 | RNVC: 9
CCH K80014: RNCC: 5 | RNVC: 9

23 Aug 2012

3040-01-609-9669
Worm Shaft

016099669
5705646: RNCC: 3 | RNVC: 2

6 Aug 2012

3040-01-609-7452
Linear Actuating Cylinder Assembly

016097452
R200110024CDDZ: RNCC: 3 | RNVC: 2

1 Aug 2012

3040-01-609-4052
Ball Joint Service

016094052
380003220: RNCC: 3 | RNVC: 2

25 Jul 2012

3040-01-609-0690
Brake Disc

016090690
BT200071672: RNCC: 3 | RNVC: 2

16 Jul 2012

3040-01-609-0428
Rigid Connecting Link

016090428
22001074: RNCC: 3 | RNVC: 2

13 Jul 2012

3040-01-608-3638
Mechanical Drive Housing Part

25 Jun 2012

3040-01-607-0765
Shaft Collar

30 May 2012

3040-01-606-8414
Rigid Connecting Link

016068414
6948-104: RNCC: 3 | RNVC: 2
152-001963-0001: RNCC: 7 | RNVC: 2
152-001963: RNCC: D | RNVC: 9

24 May 2012

Load More Results