What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 2 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 2 of 300

3040-01-706-1011
Cylinder Support

017061011
P563661-C1: RNCC: 3 | RNVC: 2
P563662 REV D ITEM 2: RNCC: 5 | RNVC: 2
P563662: RNCC: D | RNVC: 9

1 Nov 2022

3040-01-706-2080
Linear Actuating Cylinder Piston

017062080
34510002: RNCC: 3 | RNVC: 2

8 Nov 2022

3040-01-708-9089
Grease Cap

017089089
CJ655-9K-MOD: RNCC: 3 | RNVC: 2
7067897-69: RNCC: 5 | RNVC: 2
H696-1603-69: RNCC: C | RNVC: 1
7067897: RNCC: D | RNVC: 9

1 May 2023

3040-01-706-3747
Linear Actuating Cylinder Assembly

017063747
HYD-200-115: RNCC: 3 | RNVC: 2
HYD-200-115: RNCC: 5 | RNVC: 2

18 Nov 2022

3040-01-706-3630
Piston Ring

017063630
04287513: RNCC: 3 | RNVC: 2
0511 4520 ITEM 4: RNCC: 5 | RNVC: 2

18 Nov 2022

3040-01-706-2049
Linear Actuating Cylinder Piston

017062049
34511022: RNCC: 3 | RNVC: 2

8 Nov 2022

3040-01-705-8127
Shouldered Shaft

017058127
8668869-010: RNCC: 3 | RNVC: 2
8668869: RNCC: D | RNVC: 9

14 Oct 2022

3040-01-706-6619
Linear Actuating Cylinder Piston

017066619
7383858-8483299-4: RNCC: 3 | RNVC: 2
H541-0255-4: RNCC: 5 | RNVC: 2
167-8483299-4: RNCC: 5 | RNVC: 9
H5470001-H5410255-4: RNCC: 5 | RNVC: 9
8483299: RNCC: D | RNVC: 9

12 Dec 2022

3040-01-707-1308
Rigid Connecting Link

017071308
ML2-11.68: RNCC: 3 | RNVC: 2

18 Jan 2023

3040-01-553-9492
Mechanical Drive Housing

015539492
77119700: RNCC: 3 | RNVC: 2
42295712: RNCC: 3 | RNVC: 9
77119700: RNCC: 5 | RNVC: 9
1089196: RNCC: 7 | RNVC: 2

27 Jul 2007

3040-01-707-1204
Linear Actuating Cylinder Piston

017071204
A8-20141: RNCC: 3 | RNVC: 2

18 Jan 2023

3040-01-707-8817
Flexible Casing End Fitting

017078817
8287240: RNCC: 3 | RNVC: 2

28 Feb 2023

3040-01-706-8293
Shouldered Shaft

017068293
8714685: RNCC: 3 | RNVC: 2

21 Dec 2022

3040-01-707-8156
Linear Actuating Cylinder Assembly

017078156
9D02599-1: RNCC: 3 | RNVC: 2

24 Feb 2023

3040-01-706-4154
Piston Ring

017064154
F.US216224.25.3: RNCC: 3 | RNVC: 2

22 Nov 2022

3040-01-707-1953
Shaft Collar

017071953
IC-075-Z: RNCC: 3 | RNVC: 2
13071355: RNCC: 7 | RNVC: 2

20 Jan 2023

3040-01-708-6438
Rigid Connecting Link

017086438
566-6985431-PN-1: RNCC: 3 | RNVC: 2
H623-0503-PN-1: RNCC: C | RNVC: 1

14 Apr 2023

3040-01-708-1565
Hydraulic Control Assembly

017081565
C29300-004: RNCC: 3 | RNVC: 2
C293000: RNCC: D | RNVC: 9

17 Mar 2023

3040-01-708-7351
Mechanical Drive Housing Part

017087351
551-7068554-2: RNCC: 3 | RNVC: 2
H845-1801-2: RNCC: 5 | RNVC: 2
551-7068554: RNCC: D | RNVC: 9

19 Apr 2023

3040-01-708-5229
Shouldered Shaft

017085229
N7237: RNCC: 3 | RNVC: 2

12 Apr 2023

3040-01-617-8435
Linear Actuating Cylinder Piston

016178435
EP-0032060: RNCC: 3 | RNVC: 2
050ME0011: RNCC: 3 | RNVC: 9

5 Apr 2013

3040-00-371-5584
Ball Joint

003715584
7372734: RNCC: 3 | RNVC: 2
7418397: RNCC: 3 | RNVC: 2
150-0638: RNCC: 3 | RNVC: 2
1111691: RNCC: 3 | RNVC: 2
08525ABI: RNCC: 5 | RNVC: 2
3H1902J2: RNCC: 5 | RNVC: 2
S12414: RNCC: 5 | RNVC: 2
191474: RNCC: 5 | RNVC: 2
527641: RNCC: 5 | RNVC: 2
109415: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-01-710-4619
Control Cam

017104619
845-7108792-58: RNCC: 3 | RNVC: 2
845-7108792 ITEM NUMBER 58: RNCC: C | RNVC: 1
845-7108792: RNCC: D | RNVC: 9

31 May 2023

3040-00-690-0642
Shouldered Shaft

006900642
415ND6282: RNCC: 3 | RNVC: 9
900171: RNCC: 5 | RNVC: 2
F-8278 PC1X: RNCC: 5 | RNVC: 9
NH7182PC415: RNCC: 5 | RNVC: 9
737120: RNCC: 5 | RNVC: 9
ND6282BPC415: RNCC: 5 | RNVC: 9
415ND6282: RNCC: 5 | RNVC: 9
H-8205PIECE 46: RNCC: 5 | RNVC: 9
ND6282PC415: RNCC: 5 | RNVC: 9
H-8188 PIECE 38: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-765-3384
Rigid Connecting Link

007653384
NAS359: RNCC: 3 | RNVC: 1
NAS359-61-390: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-01-151-6381
Push-Pull Control Assembly

011516381
065870-03-084.0: RNCC: 3 | RNVC: 2
D032377-003-84IN: RNCC: 3 | RNVC: 9
CC33007P: RNCC: 5 | RNVC: 2
32377-003-7FT: RNCC: 5 | RNVC: 9
33C 7FT: RNCC: 5 | RNVC: 9
33-C-84IN: RNCC: 5 | RNVC: 9
30P225: RNCC: 5 | RNVC: 9
MOR33C: RNCC: 5 | RNVC: 9
CC3300-0225: RNCC: 5 | RNVC: 9
33C 7FT: RNCC: 5 | RNVC: 9

20 Apr 1983

3040-01-154-6944
Rigid Connecting Link

011546944
74A450996-1003: RNCC: 3 | RNVC: 2
74A450996-1003: RNCC: 5 | RNVC: 2
74A450996-1003: RNCC: 5 | RNVC: 2
74A450996-1003: RNCC: 5 | RNVC: 2
74A450996-1003: RNCC: 5 | RNVC: 2
74A450996-1003: RNCC: 5 | RNVC: 2
PL74A450996 REV A: RNCC: 5 | RNVC: 9
74A450996-1003: RNCC: 5 | RNVC: 9
74A450996-1003: RNCC: 5 | RNVC: 9
74A450996-1003: RNCC: 5 | RNVC: 9

29 May 1983

3040-01-248-0527
Disk Brake Shoe

012480527
D-5206-0007: RNCC: 3 | RNVC: 9
DGR4350B PT70E: RNCC: 5 | RNVC: 1
DGR4350C PT70E: RNCC: 5 | RNVC: 1
D-5026-0007: RNCC: 5 | RNVC: 1
DGR4350C PT70EVM: RNCC: 5 | RNVC: 2
DGR4350B PT70E: RNCC: 5 | RNVC: 2
D-5206-0007VM: RNCC: 5 | RNVC: 2

15 Jan 1987

3040-01-366-9582
Linear Actuating Cylinder Assembly

013669582
7LSG1.50-11.50-NC-0.625-1-NPTF11: RNCC: 3 | RNVC: 2
7LG1.5X11.5NC 1 1: RNCC: 5 | RNVC: 9
23038641: RNCC: 7 | RNVC: 2

4 Nov 1992

3040-01-356-4589
Shouldered Shaft

013564589
12701506: RNCC: 3 | RNVC: 2
1863010W: RNCC: 5 | RNVC: 2
1863010W: RNCC: 5 | RNVC: 9

4 Apr 1992

3040-01-564-2055
Shoe Type Brake

015642055
3596011: RNCC: 1 | RNVC: 2
K027790: RNCC: 3 | RNVC: 2
BCA1208 PCD: RNCC: 3 | RNVC: 2
331229: RNCC: 5 | RNVC: 9
K027790: RNCC: 5 | RNVC: 9
3596011: RNCC: 5 | RNVC: 9

9 Jun 2008

3040-01-487-8480
Mechanically Actuated Spindle

014878480
124-5589896 PC 28: RNCC: 3 | RNVC: 2
124-4322648 PC 32: RNCC: 3 | RNVC: 2
124-4366739 PC 31: RNCC: 5 | RNVC: 2
124-4322651 PC 35: RNCC: 5 | RNVC: 2
124-4322652 PC 35: RNCC: 5 | RNVC: 2
124-5200227 PC 8: RNCC: 5 | RNVC: 2
124-4366739: RNCC: D | RNVC: 9
124-4322651: RNCC: D | RNVC: 9
124-4322652: RNCC: D | RNVC: 9
124-5589896: RNCC: D | RNVC: 9

21 Aug 2001

3040-01-564-2110
Shoe Type Brake

015642110
K027789: RNCC: 3 | RNVC: 2
BCA1209 PCD: RNCC: 3 | RNVC: 2
331228: RNCC: 5 | RNVC: 9
K027789: RNCC: 5 | RNVC: 9
14KP949: RNCC: 5 | RNVC: 9
3596010: RNCC: 5 | RNVC: 9
3596010: RNCC: 7 | RNVC: 2

9 Jun 2008

3040-01-261-1463
Extension Shaft

012611463
3825029: RNCC: 3 | RNVC: 2
3825029: RNCC: 3 | RNVC: 2
3825029: RNCC: 5 | RNVC: 2
3825029-2: RNCC: 5 | RNVC: 2
3825029: RNCC: 5 | RNVC: 9

9 Aug 1987

3040-01-710-6056
Counterbalance Weight

017106056
23087713-2: RNCC: 3 | RNVC: 2

9 Jun 2023

3040-01-710-4762
Shaft Retaining Plate

017104762
FA9734-02: RNCC: 3 | RNVC: 2

1 Jun 2023

3040-01-710-2666
Remote Control Lever

017102666
395515: RNCC: 3 | RNVC: 2
23869380: RNCC: 5 | RNVC: 2
7423869380: RNCC: 5 | RNVC: 2

20 May 2023

3040-01-710-4727
Nonvehicular Propeller Shaft

017104727
W084834592: RNCC: 3 | RNVC: 2

1 Jun 2023

3040-01-710-6386
Piston Ring

017106386
00-997698: RNCC: 3 | RNVC: 2

12 Jun 2023

3040-01-037-2750
Linear Actuating Cylinder Cap

010372750
R433092526: RNCC: 3 | RNVC: 2
P153809-0102: RNCC: 3 | RNVC: 9
P153809-0000: RNCC: 5 | RNVC: 9
P153687 PC 23: RNCC: 5 | RNVC: 9
P153809-0102: RNCC: 5 | RNVC: 9

16 Mar 1977

3040-01-710-9704
Shouldered Shaft

017109704
842121: RNCC: 3 | RNVC: 2

11 Jul 2023

3040-01-710-7660
Straight Shaft Assembly

017107660
112153039: RNCC: 3 | RNVC: 2

23 Jun 2023

3040-01-711-0712
Piston Ring

017110712
5146T81P04: RNCC: 3 | RNVC: 2
5146T81: RNCC: D | RNVC: 9

18 Jul 2023

3040-01-710-7472
Hub Clamp

017107472
001-000230-000: RNCC: 3 | RNVC: 2
DXE-RSB-I12500: RNCC: 5 | RNVC: 2

22 Jun 2023

3040-01-334-4902
Straight Shaft

013344902
RE548060: RNCC: 3 | RNVC: 2
RE519737: RNCC: 5 | RNVC: 9
R54986: RNCC: 5 | RNVC: 9
R54986: RNCC: 5 | RNVC: 9

23 Feb 1991

3040-00-735-1514
Shouldered Shaft

007351514
7351514: RNCC: 3 | RNVC: 2
7351514: RNCC: 5 | RNVC: 9
2920007351514: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-710-9074
Shouldered Shaft

017109074
00-971962: RNCC: 3 | RNVC: 2

7 Jul 2023

3040-01-707-6866
Shouldered Shaft

017076866
09203045-01: RNCC: 3 | RNVC: 2

16 Feb 2023

3040-00-390-8843
Straight Shaft

003908843
PT-822: RNCC: 3 | RNVC: 2
5192251: RNCC: 5 | RNVC: 2
519225: RNCC: 5 | RNVC: 9
266663R1: RNCC: 5 | RNVC: 9
266663R1: RNCC: 5 | RNVC: 9
K3307: RNCC: 5 | RNVC: 9
5192251: RNCC: 5 | RNVC: 9
4-410-140 ITEM 014: RNCC: 5 | RNVC: 9
2-778-998-06431: RNCC: 5 | RNVC: 9
5192251: RNCC: C | RNVC: 1

1 Jan 1963

3040-01-254-3501
Push-Pull Control Assembly

012543501
7514-6014: RNCC: 3 | RNVC: 2
SR10784A-6774: RNCC: 5 | RNVC: 2
KSL125700BX-6014: RNCC: 5 | RNVC: 2
7014-137: RNCC: 5 | RNVC: 9
LE162-0002-6014: RNCC: 7 | RNVC: 2

5 May 1987

3040-01-252-4260
Mechanical Drive Housing

012524260
01-467-0108-3: RNCC: 3 | RNVC: 2
01-435-0212-5 PC31: RNCC: 5 | RNVC: 1
17700-391: RNCC: 5 | RNVC: 2

2 Apr 1987

3040-01-083-7491
Linear Actuating Cylinder Assembly

010837491
EE103448: RNCC: 3 | RNVC: 2
117402: RNCC: 5 | RNVC: 9
2590011200167: RNCC: 5 | RNVC: 9
EE103448: RNCC: 5 | RNVC: 9
3WB205: RNCC: E | RNVC: 8

29 Sep 1979

3040-01-182-6260
Rigid Connecting Link

011826260
7514-6021: RNCC: 3 | RNVC: 2
SR10784A-6021: RNCC: 5 | RNVC: 2
KSL125700BX-6021: RNCC: 5 | RNVC: 2
7014-141: RNCC: 5 | RNVC: 9
LE162-0002-6021: RNCC: 7 | RNVC: 2

26 Jun 1984

3040-00-027-2615
Differential Gear Unit

000272615
8587531: RNCC: 3 | RNVC: 2
8587531: RNCC: 5 | RNVC: 2
8587531: RNCC: 5 | RNVC: 2
8587531: RNCC: 5 | RNVC: 9
3040000272615: RNCC: 6 | RNVC: 9

2 May 1967

3040-01-102-7147
Flexible Drive Shaft

011027147
FA GEN 13AX1: RNCC: 3 | RNVC: 2
312-16202X: RNCC: 5 | RNVC: 9
3XR2306: RNCC: 5 | RNVC: 9
A-200-4050: RNCC: 5 | RNVC: 9
3XR23: RNCC: 5 | RNVC: 9
312-16202X: RNCC: 5 | RNVC: 9
3XR23: RNCC: 5 | RNVC: 9
3XR2306: RNCC: 5 | RNVC: 9
12273191: RNCC: 5 | RNVC: 9
3040011027147: RNCC: 6 | RNVC: 9

25 Oct 1980

3040-01-137-8296
Seperator Shaft

011378296
1028320: RNCC: 3 | RNVC: 2
740B591: RNCC: 3 | RNVC: 9
911-508 PART 740B591: RNCC: 5 | RNVC: 9
911-508 PART 740B591: RNCC: C | RNVC: 1
911-508 REF 3 2IN: RNCC: C | RNVC: 1
911-510 PIECE 3 740B591: RNCC: C | RNVC: 1
51740B591: RNCC: C | RNVC: 1

2 Sep 1982

3040-01-151-3755
Straight Shaft

011513755
006-7100030-302: RNCC: 3 | RNVC: 2
L-2184: RNCC: 5 | RNVC: 2
55-22015-15: RNCC: 5 | RNVC: 2
728-0030-237: RNCC: 5 | RNVC: 2
KMC-286-0337-000 PC.6: RNCC: 5 | RNVC: 2
RAC-5MMX50N: RNCC: 5 | RNVC: 2
722-0150-000 PIECE 4: RNCC: 5 | RNVC: 9
722-0150-000 PIECE 4: RNCC: 5 | RNVC: 9
728-0030-237: RNCC: 5 | RNVC: 9
728-0030-237: RNCC: 5 | RNVC: 9

16 Apr 1983

3040-00-992-2209
Rigid Connecting Link

009922209
NAS356: RNCC: 3 | RNVC: 1
NAS356-64-2380: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-01-231-6645
Flexible Drive Shaft

012316645
5000776: RNCC: 3 | RNVC: 2
435756: RNCC: 5 | RNVC: 9
0435756: RNCC: 5 | RNVC: 9
435756: RNCC: 5 | RNVC: 9
0435756: RNCC: 5 | RNVC: 9
435756: RNCC: 5 | RNVC: 9
391379: RNCC: 5 | RNVC: 9
433632: RNCC: 5 | RNVC: 9
394616: RNCC: 5 | RNVC: 9
391379: RNCC: 5 | RNVC: 9

1 May 1986

3040-01-145-0528
Rigid Connecting Link

011450528
NAS362: RNCC: 3 | RNVC: 1
NAS362-63-1014: RNCC: 3 | RNVC: 2

4 Jan 1983

3040-01-145-1056
Rigid Connecting Link

011451056
NAS359: RNCC: 3 | RNVC: 1
NAS359-64-390: RNCC: 3 | RNVC: 2

5 Jan 1983

3040-01-107-6785
Straight Shaft

011076785
74A450966-2005: RNCC: 3 | RNVC: 2
74A450966-2005: RNCC: 5 | RNVC: 2
74A450966-2005: RNCC: 5 | RNVC: 2
74A450966-2005: RNCC: 5 | RNVC: 2
74A450966-2005: RNCC: 5 | RNVC: 2
74A450966-2005: RNCC: 5 | RNVC: 2
74A450966-2005: RNCC: 5 | RNVC: 9
74A450966-2005: RNCC: 5 | RNVC: 9
74A450966-2005: RNCC: 5 | RNVC: 9
74A450966-2005: RNCC: 5 | RNVC: 9

11 Feb 1981

3040-01-366-0680
Extension Shaft

013660680
199022K02: RNCC: 3 | RNVC: 2
199022-K2: RNCC: 5 | RNVC: 2

21 Oct 1992

3040-01-462-4704
Linear Actuating Cylinder Assembly

014624704
1H2H0A00269460: RNCC: 3 | RNVC: 2
5038040: RNCC: 5 | RNVC: 9
4.00CBB-2HLTVS13 X 62.375: RNCC: 5 | RNVC: 9
AG189988E0: RNCC: 5 | RNVC: 9

4 Feb 1999

3040-01-705-3970
Linear Actuating Cylinder Piston

017053970
CPN362-TW-6: RNCC: 3 | RNVC: 2

19 Sep 2022

3040-01-526-4901
Flexible Shaft Assembly

015264901
57353-110: RNCC: 3 | RNVC: 2
57353-110FT0IN: RNCC: 5 | RNVC: 9

20 Dec 2004

3040-01-589-2511
Ball Joint

015892511
144011915E: RNCC: 3 | RNVC: 2
144011915E: RNCC: 5 | RNVC: 2
SA144011915E: RNCC: 5 | RNVC: 2
144011448E: RNCC: 5 | RNVC: 9

22 Oct 2010

3040-01-256-2257
Flexible Shaft Assembly

012562257
57714-04: RNCC: 3 | RNVC: 2
57714-4: RNCC: 5 | RNVC: 9

3 Jun 1987

3040-01-219-8735
Disk Brake Shoe

012198735
J213216: RNCC: 3 | RNVC: 2
F520D001: RNCC: 3 | RNVC: 9

4 Nov 1985

3040-01-182-6261
Rigid Connecting Link

011826261
7514-6043: RNCC: 3 | RNVC: 2
SR10784A-6043: RNCC: 5 | RNVC: 2
KSL125700BX-6043: RNCC: 5 | RNVC: 2
7014-113: RNCC: 5 | RNVC: 9
LE162-0002-6043: RNCC: 7 | RNVC: 2

26 Jun 1984

3040-01-303-6447
Rigid Connecting Link

013036447
92047-991: RNCC: 3 | RNVC: 9
3537646-001: RNCC: 5 | RNVC: 2
012305: RNCC: 5 | RNVC: 2
HE012305: RNCC: 5 | RNVC: 2
3537646-001: RNCC: 5 | RNVC: 9
3537646: RNCC: D | RNVC: 9

4 Jul 1989

3040-00-152-8830
Shaft Collar

001528830
CS-3040-0084: RNCC: 3 | RNVC: 2
805-1400054PC7: RNCC: 5 | RNVC: 2
805-1400054-7: RNCC: 5 | RNVC: 2
50301000 PC 22: RNCC: 5 | RNVC: 9
5602 PE: RNCC: 5 | RNVC: 9
32157: RNCC: 5 | RNVC: 9
32157: RNCC: 5 | RNVC: 9
3040PL1332822: RNCC: 6 | RNVC: 9
5602 PE: RNCC: C | RNVC: 1
803-6397269 PC 165: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-111-2719
Straight Shaft

001112719
11604763: RNCC: 3 | RNVC: 2
3040001112719: RNCC: 6 | RNVC: 9

16 Aug 1968

3040-00-084-9117
Linear Actuating Cylinder Assembly

000849117
LS2004218SA: RNCC: 3 | RNVC: 2
69C4963-1: RNCC: 5 | RNVC: 9
3040PL1874899: RNCC: 6 | RNVC: 9
000993-285: RNCC: 7 | RNVC: 2
1378AS272-1: RNCC: C | RNVC: 1
1378AS272-1: RNCC: C | RNVC: 1

24 Nov 1972

3040-00-946-5345
Rigid Connecting Link

009465345
NAS356: RNCC: 3 | RNVC: 1
NAS356-64-2638: RNCC: 3 | RNVC: 2
NAS356-64-2638: RNCC: 3 | RNVC: 2
NAS356-64-2638: RNCC: 5 | RNVC: 2

11 Mar 1966

3040-00-839-9207
Rigid Connecting Link

008399207
NAS356: RNCC: 3 | RNVC: 1
NAS356-81-1500: RNCC: 3 | RNVC: 2

16 Dec 1966

3040-00-359-4445
Shouldered Shaft

003594445
8486316: RNCC: 3 | RNVC: 2
8486316: RNCC: 3 | RNVC: 2
7D116644: RNCC: 5 | RNVC: 2
116-209: RNCC: 5 | RNVC: 2
TL7623: RNCC: 5 | RNVC: 2
116644: RNCC: 5 | RNVC: 2
16T209: RNCC: 5 | RNVC: 9
9045734: RNCC: 5 | RNVC: 9
116644: RNCC: 5 | RNVC: 9
503093: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-523-7589
Linear Actuating Cylinder Assembly

015237589
604-9010: RNCC: 3 | RNVC: 2
381-8054: RNCC: 5 | RNVC: 9
191-8161: RNCC: 5 | RNVC: 9
2283506: RNCC: 5 | RNVC: 9

15 Sep 2004

3040-01-683-4641
Ball Joint

016834641
7061236: RNCC: 3 | RNVC: 2
7061236: RNCC: 5 | RNVC: 2
7061236: RNCC: 5 | RNVC: 2
7061284: RNCC: 5 | RNVC: 2

24 Sep 2019

3040-01-005-3280
Shouldered Shaft

010053280
664-27518-000: RNCC: 3 | RNVC: 2
376L602/AE902 ITEM 20: RNCC: 5 | RNVC: 2
005418321/20: RNCC: 5 | RNVC: 2
664-27518: RNCC: 5 | RNVC: 2
376L602/AE902/20: RNCC: 5 | RNVC: 2
005418321 ITEM 20: RNCC: 5 | RNVC: 2
064-27518D: RNCC: 5 | RNVC: 9
664-27518: RNCC: 5 | RNVC: 9
064-27518-000: RNCC: 5 | RNVC: 9
364-37846PC61: RNCC: 5 | RNVC: 9

23 Jun 1975

3040-00-756-1070
Hub Clamp

007561070
L1-3: RNCC: 3 | RNVC: 2
10392450-1: RNCC: 3 | RNVC: 2
C85: RNCC: 3 | RNVC: 2
SMB209513-3: RNCC: 5 | RNVC: 2
NGX14760-3: RNCC: 5 | RNVC: 2
342B17232-1: RNCC: 5 | RNVC: 9
SM-A-948058-8: RNCC: 7 | RNVC: 2
CG3-32: RNCC: C | RNVC: 1
L1-3: RNCC: C | RNVC: 1
L1-3: RNCC: C | RNVC: 1

1 Jan 1960

3040-00-734-6750
Shouldered Shaft

007346750
62-60-4: RNCC: 3 | RNVC: 2
62-60-4: RNCC: 5 | RNVC: 2
100105R1: RNCC: 5 | RNVC: 2
7346750: RNCC: 5 | RNVC: 2
2345435: RNCC: 5 | RNVC: 9
100105R1: RNCC: 5 | RNVC: 9
316807: RNCC: 5 | RNVC: 9
KC2519: RNCC: 5 | RNVC: 9
KC2519: RNCC: 5 | RNVC: 9
2520007346750: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-766-2959
Straight Shaft

007662959
12298086: RNCC: 3 | RNVC: 2
1064486G001: RNCC: 5 | RNVC: 2
319918-1: RNCC: 5 | RNVC: 2
1064486: RNCC: 5 | RNVC: 2
5800334-2150-012: RNCC: 5 | RNVC: 2
A1-10: RNCC: 5 | RNVC: 2
319918-1: RNCC: 5 | RNVC: 9
1064486: RNCC: 5 | RNVC: 9
1064486: RNCC: 5 | RNVC: 9
3040PL0664069: RNCC: 6 | RNVC: 9

1 Jan 1962

3040-00-756-1770
Hub Clamp

007561770
L1-5: RNCC: 3 | RNVC: 2
711699-012: RNCC: 5 | RNVC: 2
NGX14760-5: RNCC: 5 | RNVC: 2
409708-3: RNCC: 5 | RNVC: 2
CG72: RNCC: 5 | RNVC: 2
7423227P5: RNCC: 5 | RNVC: 2
SMB617463-2: RNCC: 5 | RNVC: 2
711699-12: RNCC: 5 | RNVC: 2
9195487: RNCC: 5 | RNVC: 2
9950824: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-01-107-6895
Control Cam

011076895
74A450854-2001: RNCC: 3 | RNVC: 2
74A450854-2001: RNCC: 5 | RNVC: 2
74A450854-2001: RNCC: 5 | RNVC: 2
74A450854-2001: RNCC: 5 | RNVC: 2
74A450854-2001: RNCC: 5 | RNVC: 2
74A450854-2001: RNCC: 5 | RNVC: 2
74A450854-2001: RNCC: 5 | RNVC: 2
74A450854-2001: RNCC: 5 | RNVC: 9
74A450854-2001: RNCC: 5 | RNVC: 9
74A450854-2001: RNCC: 5 | RNVC: 9

11 Feb 1981

3040-01-093-0560
Rigid Connecting Link

010930560
11684329: RNCC: 1 | RNVC: 2
48100225: RNCC: 3 | RNVC: 2
AR919-2: RNCC: 5 | RNVC: 9
900-54-188: RNCC: 5 | RNVC: 9
SRK168: RNCC: 5 | RNVC: 9
2540010930560: RNCC: 6 | RNVC: 9

10 Apr 1980

3040-01-389-9280
Rigid Connecting Link

013899280
650041H00: RNCC: 3 | RNVC: 2
650041-H: RNCC: 5 | RNVC: 9

7 May 1994

3040-01-353-0671
Linear Actuating Cylinder

013530671
4.00HB2HHNAU124AX6.000: RNCC: 3 | RNVC: 2
4HB2HL24X6: RNCC: 3 | RNVC: 9

5 Feb 1992

3040-01-526-4839
Flexible Shaft Assembly

015264839
57353-90: RNCC: 3 | RNVC: 2
57353-90FT0IN: RNCC: 5 | RNVC: 9

20 Dec 2004

3040-01-524-2177
Hydraulic Control Assembly

015242177
11166813: RNCC: 3 | RNVC: 2
236634: RNCC: 5 | RNVC: 2
155G4172: RNCC: 5 | RNVC: 9
155G4093: RNCC: 5 | RNVC: 9

24 Sep 2004

3040-01-655-4382
Piston Ring

016554382
7023MS-772-T: RNCC: 3 | RNVC: 2
60642-XX023-010R11: RNCC: 5 | RNVC: 2
S38421-0023T-28: RNCC: 5 | RNVC: 2

26 May 2016

3040-01-604-4427
Pneumatic Actuator Cylinder Housing

016044427
8M0184532: RNCC: 3 | RNVC: 2
898349A14: RNCC: 5 | RNVC: 9
898349A04: RNCC: 5 | RNVC: 9

5 Apr 2012

3040-01-459-5776
Rigid Connecting Link

014595776
4630-627C: RNCC: 3 | RNVC: 2
17B9F1112-627: RNCC: 5 | RNVC: 2
A-C17118-627: RNCC: 5 | RNVC: 2

7 Oct 1998

3040-01-690-3767
Rigid Connecting Link

016903767
221K718H11: RNCC: 3 | RNVC: 2
221K718H01: RNCC: 5 | RNVC: 9
221K718: RNCC: D | RNVC: 9

10 Aug 2020

3040-01-709-0529
Nonaircraft Mechanical Actuator

017090529
12680673-002: RNCC: 3 | RNVC: 2
12680673-002: RNCC: C | RNVC: 1

9 May 2023

3040-01-709-0477
Nonaircraft Mechanical Actuator

017090477
12680673-001: RNCC: 3 | RNVC: 2
12680673-001: RNCC: C | RNVC: 1

8 May 2023

3040-01-706-7687
Shouldered Shaft

017067687
12638853: RNCC: 3 | RNVC: 2

16 Dec 2022

3040-01-707-3929
Brake Shoe Push Rod

017073929
472642360071: RNCC: 3 | RNVC: 2

31 Jan 2023

3040-01-706-2653
Push-Pull Control Assembly

017062653
60178-170-02: RNCC: 3 | RNVC: 2
PL 601780199-03: RNCC: D | RNVC: 9

12 Nov 2022

3040-01-707-5583
Nonaircraft Mechanical Actuator

017075583
P-064782: RNCC: 3 | RNVC: 2

9 Feb 2023

3040-01-707-6633
Straight Shaft

017076633
187-6985861-13: RNCC: 3 | RNVC: 2
H692-1605-13: RNCC: C | RNVC: 1

15 Feb 2023

3040-01-701-7811
Straight Shaft

017017811
B19156-1: RNCC: 3 | RNVC: 2

8 Jun 2022

3040-00-545-1782
Flexible Shaft Assembly Core

005451782
M10215-1F412: RNCC: 2 | RNVC: 2
MIL-DTL-10215: RNCC: 4 | RNVC: 1
7418490: RNCC: 5 | RNVC: 1
1581843: RNCC: 5 | RNVC: 9
6600005451782: RNCC: 5 | RNVC: 9
6680005451782: RNCC: 5 | RNVC: 9
418049: RNCC: 5 | RNVC: 9
MIL-S-10215: RNCC: 5 | RNVC: 9
MS51072-12: RNCC: 5 | RNVC: 9
1581843: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-404-1791
Hub Clamp

004041791
S3200Y-C045: RNCC: 3 | RNVC: 2
C45: RNCC: 5 | RNVC: 9
11830417: RNCC: 7 | RNVC: 2
8740-567: RNCC: C | RNVC: 1

6 Aug 1969

3040-00-701-2800
Shaft Collar

007012800
7012800: RNCC: 3 | RNVC: 2
3040PL1380028: RNCC: 6 | RNVC: 9
805-1624082 PC 52: RNCC: C | RNVC: 1
805-1624071 PC5: RNCC: C | RNVC: 1
805-1624073 PC5: RNCC: C | RNVC: 1
805-1645438 PC5: RNCC: C | RNVC: 1
805-1645438PC52: RNCC: C | RNVC: 1
8100-1252-0058: RNCC: C | RNVC: 1
8100-1252-0061 PC 52: RNCC: C | RNVC: 1
8100-1252-0060 PC NO 52: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-469-6663
Worm Shaft

004696663
10555580: RNCC: 3 | RNVC: 2
3040004696663: RNCC: 6 | RNVC: 9

28 Jan 1970

3040-00-585-1861
Shaft Collar

005851861
SC62: RNCC: 3 | RNVC: 2
504-007: RNCC: E | RNVC: 8

1 Jan 1963

3040-00-767-3599
Ball Joint

007673599
R-109: RNCC: 3 | RNVC: 2
653867C1: RNCC: 5 | RNVC: 2
D121417: RNCC: 5 | RNVC: 2
AM1924T: RNCC: 5 | RNVC: 2
11657355: RNCC: 5 | RNVC: 2
158397: RNCC: 5 | RNVC: 9
R109: RNCC: 5 | RNVC: 9
653867C1: RNCC: 5 | RNVC: 9
R109RH: RNCC: 5 | RNVC: 9
SPG1004CPA: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-338-3409
Shaft Retaining Plate

003383409
S4700H3114129PC3: RNCC: 3 | RNVC: 2
R136-35: RNCC: 5 | RNVC: 2
10042CC4: RNCC: 5 | RNVC: 2
53509-0070: RNCC: 5 | RNVC: 2
266276: RNCC: 5 | RNVC: 2
DD927S5801-765256ITEM24: RNCC: 5 | RNVC: 2
H3115277PC35: RNCC: 5 | RNVC: 2
A3114155: RNCC: 5 | RNVC: 2
H3115277PC35: RNCC: 5 | RNVC: 9
R140PC35: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-992-2208
Rigid Connecting Link

009922208
NAS356: RNCC: 3 | RNVC: 1
NAS356-64-2240: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-01-118-8562
Rigid Connecting Link

011188562
NAS356: RNCC: 3 | RNVC: 1
NAS356-84-1060: RNCC: 3 | RNVC: 2

12 Sep 1981

3040-01-115-5585
Rigid Connecting Link

011155585
74A410765-1001: RNCC: 3 | RNVC: 2
74A410765-1001: RNCC: 5 | RNVC: 2
74A410765-1001: RNCC: 5 | RNVC: 2
74A410765-1001: RNCC: 5 | RNVC: 2
74A410765-1001: RNCC: 5 | RNVC: 2
74A410765-1001: RNCC: 5 | RNVC: 9
74A410765-1001: RNCC: 5 | RNVC: 9
74A410765-1001: RNCC: 5 | RNVC: 9
74A410765-1001: RNCC: 5 | RNVC: 9
74A410765-1001: RNCC: 5 | RNVC: 9

9 Jul 1981

3040-01-189-3322
Spur Gearshaft

011893322
27190: RNCC: 3 | RNVC: 2
14-27030 ITEM 1: RNCC: 5 | RNVC: 2
14-27030: RNCC: D | RNVC: 9

14 Sep 1984

3040-01-145-1057
Rigid Connecting Link

011451057
NAS359: RNCC: 3 | RNVC: 1
NAS359-64-768: RNCC: 3 | RNVC: 2

5 Jan 1983

3040-01-145-0527
Rigid Connecting Link

011450527
NAS356: RNCC: 3 | RNVC: 1
NAS356-64-1210: RNCC: 3 | RNVC: 2

4 Jan 1983

3040-01-170-6755
Ball Joint

011706755
3536338-003: RNCC: 3 | RNVC: 9
353 6338-003: RNCC: 5 | RNVC: 2
353 6338-003: RNCC: 5 | RNVC: 2
455-0103: RNCC: 6 | RNVC: 9

27 Jan 1984

3040-01-296-6903
Shouldered Shaft

012966903
5497629-1: RNCC: 3 | RNVC: 2
5497629-2: RNCC: 5 | RNVC: 2
5497629-1: RNCC: 5 | RNVC: 9
5497629: RNCC: D | RNVC: 9

23 Mar 1989

3040-01-165-4763
Ball Joint

011654763
90931-991: RNCC: 3 | RNVC: 2
90931-991: RNCC: 3 | RNVC: 9
2184 4002-016: RNCC: 5 | RNVC: 2
2184 4002-016: RNCC: 5 | RNVC: 2
010245: RNCC: 5 | RNVC: 2
21844002-016: RNCC: 5 | RNVC: 9

29 Oct 1983

3040-01-475-7056
Linear Actuating Cylinder Piston

014757056
41162: RNCC: 3 | RNVC: 2
30093-40940 ITEM 7: RNCC: 5 | RNVC: 2
MG1001987-0001: RNCC: 5 | RNVC: 9

9 Jun 2000

3040-01-532-1738
Rotary Actuating Cylinder Assembly

015321738
91200-494: RNCC: 3 | RNVC: 2
91200-272: RNCC: 5 | RNVC: 9
91200-272: RNCC: 5 | RNVC: 9
3040PL1926741: RNCC: 6 | RNVC: 9
3040PL2063383: RNCC: 6 | RNVC: 9
201219025-01: RNCC: 7 | RNVC: 2
000993-204: RNCC: 7 | RNVC: 2

1 Aug 2005

3040-01-361-3277
Linear Actuating Cylinder

013613277
1H2H0A000810083: RNCC: 3 | RNVC: 2
1-1/2CC2HLTS14AC3.00: RNCC: 5 | RNVC: 2
AG152755D: RNCC: 5 | RNVC: 9
1 1/2CC2HLTS14CX3 AG152755: RNCC: 5 | RNVC: 9

14 Jul 1992

3040-01-497-6850
Mechanical Drive Housing

014976850
845-4687404 ASSY 223: RNCC: 3 | RNVC: 2
2641-792-03 ASSY 223: RNCC: 3 | RNVC: 2
501-7066644-1: RNCC: 5 | RNVC: 2
501-7066649-6: RNCC: 5 | RNVC: 2
H525-7606-1: RNCC: 5 | RNVC: 2
H525-7611-6: RNCC: 5 | RNVC: 2
845-4687407 ASS: RNCC: C | RNVC: 1
H525-7606: RNCC: D | RNVC: 9
4687404: RNCC: D | RNVC: 9
2641-792-03: RNCC: D | RNVC: 9

30 May 2002

3040-01-539-9349
Linear Actuating Cylinder Assembly Parts Kit

015399349
AHC22108: RNCC: 3 | RNVC: 2
AH212097: RNCC: 3 | RNVC: 9
AH212097: RNCC: 5 | RNVC: 2
AH212097: RNCC: 5 | RNVC: 9
AH212097: RNCC: C | RNVC: 1

4 May 2006

3040-01-669-1041
Rigid Connecting Link

016691041
140576: RNCC: 3 | RNVC: 2
140576: RNCC: 5 | RNVC: 2
62400-0018E01: RNCC: 5 | RNVC: 9
62400-0018E01: RNCC: 7 | RNVC: 2

20 Dec 2017

3040-01-686-8681
Rigid Connecting Link

016868681
444-001-001-115: RNCC: 3 | RNVC: 2
444-001-001-105: RNCC: 5 | RNVC: 9

9 Mar 2020

3040-01-132-6797
Flexible Drive Shaft

011326797
MC4495-37 3/4 IN: RNCC: 3 | RNVC: 2
4720011326797: RNCC: 5 | RNVC: 9
3040011326797: RNCC: 6 | RNVC: 9

2 Jun 1982

3040-01-698-2381
Remote Control Lever

016982381
XXDA-130 ITEM 00001 X2: RNCC: 3 | RNVC: 2
XXDA-130: RNCC: D | RNVC: 9

4 Nov 2021

3040-01-707-6352
Shouldered Shaft

017076352
213.24.620.21: RNCC: 3 | RNVC: 2

14 Feb 2023

3040-01-706-5226
Straight Shaft

017065226
560-0202: RNCC: 3 | RNVC: 2

2 Dec 2022

3040-01-706-0137
Remote Control Lever

017060137
840845: RNCC: 3 | RNVC: 2

25 Oct 2022

3040-01-698-0139
Shouldered Shaft Assembly

016980139
356-5426: RNCC: 3 | RNVC: 2

22 Oct 2021

3040-01-696-3779
Planetary Gears Carrier

016963779
6603/5-442-000: RNCC: 3 | RNVC: 2
6603/5-999-000: RNCC: 5 | RNVC: 2
6603/5-442-000: RNCC: 5 | RNVC: 9

23 Jul 2021

3040-01-707-8661
Helical Gear And Shaft Assembly

017078661
412061M1: RNCC: 3 | RNVC: 2

27 Feb 2023

3040-01-698-1684
Bell Crank Support

016981684
9381M68G01: RNCC: 3 | RNVC: 2

2 Nov 2021

3040-01-699-8321
Nonaircraft Mechanical Actuator

016998321
322001-1: RNCC: 3 | RNVC: 2
322001 REV E: RNCC: 5 | RNVC: 2

1 Mar 2022

3040-01-698-8281
Nonrotating Shaft Eye Bracket

016988281
HC3Z-1109-C: RNCC: 3 | RNVC: 2

13 Dec 2021

3040-01-701-4627
Housing Adapter

017014627
PF413O102ZZ: RNCC: 3 | RNVC: 2
5802955180: RNCC: 5 | RNVC: 9

18 May 2022

3040-01-699-1503
Linear Actuating Cylinder

016991503
2L5843-1: RNCC: 3 | RNVC: 2

12 Jan 2022

3040-01-700-3358
Helical Gearshaft

017003358
06351-08003-102: RNCC: 3 | RNVC: 2

23 Mar 2022

3040-01-701-4294
Shaft Idler

017014294
506-30-52: RNCC: 3 | RNVC: 2
241-8592072 REV C SHEET 1 OF 2: RNCC: D | RNVC: 9

16 May 2022

3040-01-698-9409
Piston Ring

016989409
00-690960: RNCC: 3 | RNVC: 2

22 Dec 2021

3040-01-698-9621
Shouldered Shaft

016989621
00-848567: RNCC: 3 | RNVC: 2

23 Dec 2021

3040-01-701-6634
Rotary Actuating Cylinder Assembly

017016634
15069A-CC73599: RNCC: 3 | RNVC: 2
CC73599: RNCC: D | RNVC: 9

31 May 2022

3040-01-699-3036
Linear Actuating Cylinder

016993036
373504-101: RNCC: 3 | RNVC: 2

22 Jan 2022

3040-01-699-2843
Remote Control Lever

016992843
725-8838998-A13: RNCC: 3 | RNVC: 2
LOA007264-A13: RNCC: 5 | RNVC: 2

21 Jan 2022

3040-01-700-6572
Push-Pull Control Assembly

017006572
TEC-R11-MAN-TC-CB: RNCC: 3 | RNVC: 2

6 Apr 2022

3040-01-699-5790
Rotary Actuating Cylinder Assembly

016995790
6650E2M-CC49816: RNCC: 3 | RNVC: 1
6650E2M-CC49816TR: RNCC: 5 | RNVC: 2

9 Feb 2022

3040-01-702-0091
Straight Shaft

017020091
12617854: RNCC: 3 | RNVC: 2

21 Jun 2022

3040-01-700-6638
Remote Control Lever

017006638
725-8837478-A6: RNCC: 3 | RNVC: 2
LOA017170-A6: RNCC: 5 | RNVC: 2
8837478: RNCC: D | RNVC: 9

6 Apr 2022

3040-01-700-7646
Encoder

017007646
607980-199-N: RNCC: 3 | RNVC: 2
808005-6 ITEM 17: RNCC: C | RNVC: 1
808005-6: RNCC: D | RNVC: 9

13 Apr 2022

3040-01-702-1834
Counterbalance Weight

017021834
717405209-001: RNCC: 3 | RNVC: 2

22 Jun 2022

3040-01-700-8456
Rigid Connecting Link

017008456
525-11348-503: RNCC: 3 | RNVC: 2

16 Apr 2022

3040-01-700-7802
Rigid Connecting Link

017007802
1TD1366A20608-1001: RNCC: 3 | RNVC: 2

13 Apr 2022

3040-01-699-8492
Body Hub

016998492
12638397: RNCC: 3 | RNVC: 2

2 Mar 2022

3040-01-699-9855
Spur Gearshaft

016999855
CC-5036-19IN TYPE XX: RNCC: 3 | RNVC: 2
CC-5240 REV H PC NO 41: RNCC: 5 | RNVC: 2
CC-5036-XX REV B: RNCC: 5 | RNVC: 2

9 Mar 2022

3040-01-702-7243
Inner Sleeve

017027243
IOKF/3006193: RNCC: 3 | RNVC: 2

22 Jul 2022

3040-01-702-6725
Straight Shaft

017026725
187048-1: RNCC: 3 | RNVC: 2

19 Jul 2022

3040-01-702-6416
Shouldered Shaft

017026416
187964-1: RNCC: 3 | RNVC: 2

18 Jul 2022

3040-01-703-0138
Shouldered Shaft

017030138
10430017000: RNCC: 3 | RNVC: 2
5802951892: RNCC: 5 | RNVC: 2

11 Aug 2022

3040-01-708-7500
Hub Clamp

017087500
100140: RNCC: 3 | RNVC: 2

20 Apr 2023

3040-01-708-4161
Transmission Range Clutch Hub

017084161
29545527: RNCC: 3 | RNVC: 2

4 Apr 2023

3040-01-710-6653
Brake Backing Plate

017106653
100018732: RNCC: 3 | RNVC: 2

14 Jun 2023

3040-01-708-4743
Nonrotating Shaft Eye Bracket

017084743
395-1591: RNCC: 3 | RNVC: 2

8 Apr 2023

3040-01-708-1742
Shaft Collar

017081742
90387-07028-00: RNCC: 3 | RNVC: 2

20 Mar 2023

3040-01-708-4319
Straight Shaft

017084319
B16832: RNCC: 3 | RNVC: 2

5 Apr 2023

3040-01-708-4238
Rigid Connecting Link

017084238
SLS-060-105-001: RNCC: 3 | RNVC: 2

5 Apr 2023

3040-01-298-2938
Linear Actuating Cylinder Assembly

012982938
1H2H0A00296792: RNCC: 3 | RNVC: 2
AG144773C0: RNCC: 3 | RNVC: 9

14 Apr 1989

3040-01-037-2754
Linear Actuating Cylinder Piston Rod

010372754
R433053315: RNCC: 3 | RNVC: 2
P-324067-00000: RNCC: 3 | RNVC: 9
P153808-0000: RNCC: 5 | RNVC: 9
P153687 PC 2: RNCC: 5 | RNVC: 9
P153808-0080: RNCC: 5 | RNVC: 9
P-324067-00000: RNCC: 5 | RNVC: 9

16 Mar 1977

3040-01-709-2286
Piston Ring

017092286
00-997700: RNCC: 3 | RNVC: 2

18 May 2023

3040-01-708-3279
Nonaircraft Mechanical Actuator

017083279
3179163-1: RNCC: 3 | RNVC: 2

29 Mar 2023

3040-01-526-0723
Linear Actuating Cylinder Assembly

015260723
52022: RNCC: 3 | RNVC: 9
94734: RNCC: 5 | RNVC: 2

7 Dec 2004

3040-01-709-0749
Actuator Assembly

017090749
30089A-CC24093A: RNCC: 3 | RNVC: 2
HYDACT-CC24093TR: RNCC: 5 | RNVC: 2
HYDACT-CC24093: RNCC: 5 | RNVC: 2
30089A-CC24093ATR: RNCC: 5 | RNVC: 2

10 May 2023

3040-01-518-2486
Linear Actuating Cylinder Assembly

015182486
3.25 X 2 C MS7 PP C 1R, 3/4-16 F: RNCC: 3 | RNVC: 2
3.25X2-MS7-PP-1"ROD3/4"-16FTHR: RNCC: 3 | RNVC: 9

5 Mar 2004

3040-01-602-8802
Linear Actuating Cylinder Assembly

016028802
AH211370: RNCC: 3 | RNVC: 9
AH211370: RNCC: 5 | RNVC: 9
AH211370: RNCC: 5 | RNVC: 9
AH211370: RNCC: 5 | RNVC: 9
AHC15680: RNCC: 5 | RNVC: 9

10 Feb 2012

3040-01-701-4602
Worm Wheel Gearshaft

017014602
7000-2804: RNCC: 3 | RNVC: 2
506-30-2: RNCC: 5 | RNVC: 9
241-8592072 REV C SHEET 2 OF 2: RNCC: D | RNVC: 9

17 May 2022

3040-01-703-3240
Spline Adapter

017033240
11910850000: RNCC: 3 | RNVC: 2
5802955135: RNCC: 5 | RNVC: 2

30 Aug 2022

3040-01-703-0863
Linear Hydraulic-Pneumatic Actuator

017030863
VLCT55-0300-060R-AP1: RNCC: 3 | RNVC: 2

16 Aug 2022

3040-01-708-8333
Nonaircraft Mechanical Actuator

017088333
12544598: RNCC: 3 | RNVC: 2

26 Apr 2023

3040-01-710-4476
Mechanical Drive Housing

017104476
JLB5830-1: RNCC: 3 | RNVC: 1
JLB5830: RNCC: D | RNVC: 9

30 May 2023

3040-00-695-7189
Flexible Shaft Assembly Core

006957189
M10215-1F410: RNCC: 2 | RNVC: 2
MIL-DTL-10215: RNCC: 4 | RNVC: 1
MS51072-10: RNCC: 5 | RNVC: 9
MIL-S-10215: RNCC: 5 | RNVC: 9
7527481: RNCC: 5 | RNVC: 9
1580833: RNCC: 5 | RNVC: 9
1580833: RNCC: 5 | RNVC: 9
418049-85: RNCC: 5 | RNVC: 9
914173: RNCC: 5 | RNVC: 9
6680006957189: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-808-0757
Hub Clamp

008080757
SM-B-498145: RNCC: 3 | RNVC: 2
10179123-1: RNCC: 5 | RNVC: 2
321794-1: RNCC: 5 | RNVC: 2
C76: RNCC: 5 | RNVC: 2
SCM250: RNCC: 5 | RNVC: 2
71999-009: RNCC: 5 | RNVC: 2
71999-9: RNCC: 5 | RNVC: 2
120568-002: RNCC: 5 | RNVC: 2
C70: RNCC: 5 | RNVC: 2
10548111-2: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-965-7391
Linear Actuating Cylinder Assembly

009657391
65D35396-1: RNCC: 1 | RNVC: 2
91200-236: RNCC: 3 | RNVC: 2
65D35396-1: RNCC: 5 | RNVC: 9
65D35396-1: RNCC: 5 | RNVC: 9
65D35396-1: RNCC: 5 | RNVC: 9
65D35396-1: RNCC: 5 | RNVC: 9
65D35396-1 98750: RNCC: 5 | RNVC: 9
65D35396-1: RNCC: 5 | RNVC: 9
3A68E-1: RNCC: 5 | RNVC: 9
3A68E-60: RNCC: 5 | RNVC: 9

1 Jun 1966

3040-01-048-7836
Rigid Connecting Link

010487836
16P186-1: RNCC: 3 | RNVC: 2
16P186-1: RNCC: 5 | RNVC: 2
3040PL2061393: RNCC: 6 | RNVC: 9
16P186-1: RNCC: 8 | RNVC: 2

3 Oct 1977

3040-00-106-1989
Shaft Collar

001061989
SSC25: RNCC: 3 | RNVC: 2
003-172-002: RNCC: 3 | RNVC: 2
SSC25-37168: RNCC: 5 | RNVC: 9
115335-1: RNCC: 5 | RNVC: 9
115335: RNCC: 5 | RNVC: 9
003-172-000: RNCC: 7 | RNVC: 2
11156245: RNCC: 7 | RNVC: 2
504-002: RNCC: E | RNVC: 8

12 Jul 1968

3040-00-126-4036
Remote Control Lever

001264036
206-011-722-1: RNCC: 3 | RNVC: 2
206-011-722-001: RNCC: 5 | RNVC: 2

20 Nov 1968

3040-00-925-9794
Tube Assemb-C0ntr0l *

009259794
NAS356: RNCC: 3 | RNVC: 1
NAS356-81-510: RNCC: 3 | RNVC: 2

26 Jan 1966

3040-00-618-1357
Shaft Collar

006181357
C1-2: RNCC: 3 | RNVC: 2
404-9163-001: RNCC: 3 | RNVC: 2
11741504: RNCC: 3 | RNVC: 2
7453336P1: RNCC: 5 | RNVC: 2
2638550-1: RNCC: 5 | RNVC: 2
10034211-1: RNCC: 5 | RNVC: 2
A25A993-889-1: RNCC: 5 | RNVC: 2
7453336P1: RNCC: 5 | RNVC: 9
565-1780-002: RNCC: 5 | RNVC: 9
26430: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-01-710-7867
Linear Actuating Cylinder Piston

017107867
8721342-1: RNCC: 3 | RNVC: 2
8721421/ SHEET 1 ITEM 1: RNCC: C | RNVC: 1
8721421: RNCC: D | RNVC: 9

26 Jun 2023

3040-01-107-6896
Control Cam

011076896
74A450854-2002: RNCC: 3 | RNVC: 2
74A450854-2002: RNCC: 5 | RNVC: 2
74A450854-2002: RNCC: 5 | RNVC: 2
74A450854-2002: RNCC: 5 | RNVC: 2
74A450854-2002: RNCC: 5 | RNVC: 2
74A450854-2002: RNCC: 5 | RNVC: 9
74A450854-2002: RNCC: 5 | RNVC: 9
74A450854-2002: RNCC: 5 | RNVC: 9
1958C442-02: RNCC: 5 | RNVC: 9
74A450854-2002: RNCC: 5 | RNVC: 9

11 Feb 1981

3040-01-515-7283
Tube Seal Kit

015157283
R433002349: RNCC: 3 | RNVC: 2
C107409: RNCC: 5 | RNVC: 9
C194065 REF.11,14,15,16,17: RNCC: 5 | RNVC: 9

5 Dec 2003

3040-01-553-3448
Linear Actuating Cylinder Assembly

015533448
566-0409: RNCC: 3 | RNVC: 2
278-1969: RNCC: 5 | RNVC: 9

13 Jul 2007

3040-01-710-8154
Counterbalance Weight

017108154
23087713-1: RNCC: 3 | RNVC: 2

27 Jun 2023

3040-01-711-0151
Spline Adapter

017110151
206-040-373-101: RNCC: 3 | RNVC: 2

14 Jul 2023

3040-01-710-8484
Nonaircraft Mechanical Actuator

017108484
Y109101027AK1: RNCC: 3 | RNVC: 1

29 Jun 2023

3040-01-710-9697
Mechanical Drive Housing

017109697
842111-1: RNCC: 3 | RNVC: 2

11 Jul 2023

3040-01-653-0269
Rigid Connecting Link

016530269
213A3430-4: RNCC: 3 | RNVC: 2
213A3430-6: RNCC: 5 | RNVC: 2

10 Mar 2016

3040-00-892-2506
Shaft Collar

008922506
G67-4: RNCC: 3 | RNVC: 2
SC0-4-6: RNCC: 3 | RNVC: 2
032804: RNCC: 3 | RNVC: 2
C1-3: RNCC: 3 | RNVC: 2
EH2-3: RNCC: 5 | RNVC: 2
100006-01: RNCC: 5 | RNVC: 2
378A151G01: RNCC: 5 | RNVC: 2
378A151G01: RNCC: 5 | RNVC: 2
A302-14-3: RNCC: 5 | RNVC: 2
9072114: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-292-2296
Push-Pull Control Assembly

002922296
MA86-72G: RNCC: 3 | RNVC: 2
000-36324-0001: RNCC: 5 | RNVC: 2
A5907-004: RNCC: 5 | RNVC: 2
272603-72: RNCC: 5 | RNVC: 9
AIM-16U06-72: RNCC: 5 | RNVC: 9
A1M-16U06-72: RNCC: 5 | RNVC: 9
A5907-004: RNCC: 5 | RNVC: 9
2177-16U06-72: RNCC: 5 | RNVC: 9
006-16U06-72: RNCC: 5 | RNVC: 9
2177-16U06-72: RNCC: 5 | RNVC: 9

19 Sep 1973

3040-00-134-4696
Shaft Retaining Plate

001344696
7334972: RNCC: 3 | RNVC: 2
62-19-49: RNCC: 5 | RNVC: 2
2520001344696: RNCC: 6 | RNVC: 9

11 Jul 1969

3040-01-096-5547
Rigid Connecting Link

010965547
70400-01250: RNCC: 1 | RNVC: 2
70400-01250-053: RNCC: 3 | RNVC: 2
70400-01250-053: RNCC: 5 | RNVC: 9
70400-01250-053: RNCC: 5 | RNVC: 9
70400-01250-053: RNCC: 5 | RNVC: 9
2018-1: RNCC: 5 | RNVC: 9
70400-01250-053: RNCC: 5 | RNVC: 9
AS4-1030-053: RNCC: 5 | RNVC: 9
1100030-053: RNCC: 5 | RNVC: 9
70400-01250-053: RNCC: 5 | RNVC: 9

24 Jun 1980

3040-00-067-9045
Hub Clamp

000679045
L1-6: RNCC: 3 | RNVC: 1
CG73: RNCC: 5 | RNVC: 1
1596848P1: RNCC: 5 | RNVC: 9
10399487: RNCC: 6 | RNVC: 9
5267293-003: RNCC: C | RNVC: 1
409708-4: RNCC: C | RNVC: 1
2673205-3: RNCC: C | RNVC: 1
1596848P1REV1: RNCC: C | RNVC: 1
832 00019 00: RNCC: C | RNVC: 1
1596848: RNCC: D | RNVC: 9

5 Jul 1967

3040-01-070-3180
Rigid Connecting Link

010703180
11635975: RNCC: 3 | RNVC: 2
3040010703180: RNCC: 6 | RNVC: 9

10 Jan 1979

3040-01-115-0657
Shouldered Shaft

011150657
428293: RNCC: 3 | RNVC: 2
3040011150657: RNCC: 5 | RNVC: 9

27 Jun 1981

3040-00-640-3744
Friction Lining

006403744
A3507E: RNCC: 3 | RNVC: 2
263707R91: RNCC: 5 | RNVC: 9
6B4049: RNCC: 5 | RNVC: 9
A3507S: RNCC: 5 | RNVC: 9
A3507S: RNCC: 5 | RNVC: 9
A3507S: RNCC: 5 | RNVC: 9
70212: RNCC: 5 | RNVC: 9
E280130: RNCC: 5 | RNVC: 9
NP5024006: RNCC: 5 | RNVC: 9
6B4049: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-250-1952
Pawl

012501952
C923A0050: RNCC: 3 | RNVC: 9
923: RNCC: 5 | RNVC: 9
C-22541 PC 13: RNCC: 5 | RNVC: 9
C-22541: RNCC: D | RNVC: 9

26 Feb 1987

3040-01-196-0070
Rigid Connecting Link

011960070
74A410593-2001: RNCC: 3 | RNVC: 2
74A410593-2001: RNCC: 5 | RNVC: 2
74A410593-2001: RNCC: 5 | RNVC: 2
74A410593-2001: RNCC: 5 | RNVC: 2
74A410593-2001: RNCC: 5 | RNVC: 2
74A410593-2001: RNCC: 5 | RNVC: 2
74A410593-2001: RNCC: 5 | RNVC: 2
74A410593-2001: RNCC: 5 | RNVC: 9
74A410593-2001: RNCC: 5 | RNVC: 9
74A410593-2001: RNCC: 5 | RNVC: 9

5 Dec 1984

3040-01-653-0617
Rigid Connecting Link

016530617
1042-5: RNCC: 3 | RNVC: 2
401W1290-301: RNCC: 5 | RNVC: 2

10 Mar 2016

3040-01-468-4457
Linear Actuating Cylinder Assembly

014684457
1H2H0A00317728: RNCC: 3 | RNVC: 2
AG201177F0: RNCC: 5 | RNVC: 9

12 Oct 1999

3040-01-533-5677
Linear Actuating Cylinder Assembly Parts Kit

015335677
AHC16954: RNCC: 3 | RNVC: 2
AHC11573: RNCC: 5 | RNVC: 2
AH210484: RNCC: 5 | RNVC: 9
AH210484: RNCC: 5 | RNVC: 9
AH210484: RNCC: 5 | RNVC: 9
AHC11573: RNCC: 5 | RNVC: 9
AH210484: RNCC: C | RNVC: 1

20 Sep 2005

3040-01-467-7927
Linear Actuating Cylinder Assembly

014677927
1H2H0A00265012: RNCC: 3 | RNVC: 2
AG201181B0: RNCC: 3 | RNVC: 9

15 Sep 1999

3040-01-567-4008
Spur Gearshaft

015674008
T294890: RNCC: 3 | RNVC: 2
T173857: RNCC: 5 | RNVC: 9

25 Sep 2008

3040-01-597-5386
Straight Shaft

015975386
LG0094-2800: RNCC: 3 | RNVC: 2
LG0094-2800P: RNCC: 5 | RNVC: 9
LS0094: RNCC: D | RNVC: 9

13 Jun 2011

3040-00-411-3134
Flexible Shaft

004113134
209-001-196-001: RNCC: 3 | RNVC: 2
209-001-196-1: RNCC: 5 | RNVC: 2
209-001-196-1: RNCC: 5 | RNVC: 9
209-001-196-1: RNCC: 5 | RNVC: 9

18 Aug 1969

3040-01-473-5533
Shaft Retaining Plate

014735533
9G8020: RNCC: 3 | RNVC: 2
9G-8020: RNCC: 5 | RNVC: 2

11 Apr 2000

3040-00-089-9825
Rigid Connecting Link

000899825
209-001-063-089: RNCC: 3 | RNVC: 2
209-001-063-89: RNCC: 5 | RNVC: 2

11 Aug 1967

3040-01-690-0696
Nonaircraft Mechanical Actuator

016900696
22097: RNCC: 3 | RNVC: 2
B-830-22097: RNCC: 3 | RNVC: 9

23 Jul 2020

3040-01-601-9862
Straight Shaft

016019862
348-7288: RNCC: 3 | RNVC: 2
263-1852: RNCC: 5 | RNVC: 9
4P6126: RNCC: 5 | RNVC: 9

26 Jan 2012

3040-00-275-7024
Ball Joint

002757024
115-002: RNCC: 3 | RNVC: 9
16727: RNCC: 5 | RNVC: 2
192227: RNCC: 5 | RNVC: 2
192227: RNCC: 5 | RNVC: 9
192227: RNCC: 5 | RNVC: 9
62A46014: RNCC: 5 | RNVC: 9
329765: RNCC: 5 | RNVC: 9
23882: RNCC: 5 | RNVC: 9
329765: RNCC: 5 | RNVC: 9
CCB23882: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-528-1997
Friction Lining

005281997
6479E: RNCC: 3 | RNVC: 2
9488: RNCC: 5 | RNVC: 2
6B0187: RNCC: 5 | RNVC: 2
45550-009-02: RNCC: 5 | RNVC: 9
6B187: RNCC: 5 | RNVC: 9
XA5079PC6479S: RNCC: 5 | RNVC: 9
C108PC6479S: RNCC: 5 | RNVC: 9
CL108PC6479S: RNCC: 5 | RNVC: 9
TD6479S: RNCC: 5 | RNVC: 9
6479S: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-734-0816
Carrier Assembly Gear Set

007340816
6837507: RNCC: 3 | RNVC: 2
3021218: RNCC: 5 | RNVC: 2
73021218: RNCC: 5 | RNVC: 2
L35636: RNCC: 5 | RNVC: 2
6773610: RNCC: 5 | RNVC: 9
6768808: RNCC: 5 | RNVC: 9
6773610: RNCC: 5 | RNVC: 9
3021218: RNCC: 5 | RNVC: 9
3021218-7: RNCC: 5 | RNVC: 9
6837507: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-400-3077
Hub Clamp

004003077
AC250: RNCC: 3 | RNVC: 2
SM-B-890008-1: RNCC: 5 | RNVC: 2
S3501Y-C066: RNCC: 5 | RNVC: 2
L4-5: RNCC: 5 | RNVC: 9
P1-8: RNCC: 5 | RNVC: 9
C66: RNCC: 5 | RNVC: 9
LU-2 SPECIAL ALUMINUM: RNCC: 5 | RNVC: 9
CG1-9A: RNCC: 5 | RNVC: 9
AC250: RNCC: 5 | RNVC: 9
5189113-002: RNCC: 7 | RNVC: 2

12 Mar 1969

3040-01-107-5697
Rigid Connecting Link

011075697
74A450993-1001: RNCC: 3 | RNVC: 2
74A450993-1001: RNCC: 5 | RNVC: 2
74A450993-1001: RNCC: 5 | RNVC: 2
74A450993-1001: RNCC: 5 | RNVC: 2
74A450993-1001: RNCC: 5 | RNVC: 2
74A450993-1001: RNCC: 5 | RNVC: 2
74A450993-1001: RNCC: 5 | RNVC: 2
74A450993-1001: RNCC: 5 | RNVC: 9
74A450993-1001: RNCC: 5 | RNVC: 9
74A450993-1001: RNCC: 5 | RNVC: 9

8 Feb 1981

3040-01-108-4215
Control Cam

011084215
23197: RNCC: 3 | RNVC: 2
32-28395 ITEM 17: RNCC: 5 | RNVC: 2
895-28365 ITEM 50: RNCC: 5 | RNVC: 2
23197X01-001: RNCC: 5 | RNVC: 2
32-28395: RNCC: D | RNVC: 9

27 Feb 1981

3040-01-065-2021
Breather

010652021
K1103007: RNCC: 3 | RNVC: 2
445416C2: RNCC: 3 | RNVC: 9
9006001: RNCC: 5 | RNVC: 9
9006001: RNCC: 5 | RNVC: 9
9006001: RNCC: 5 | RNVC: 9
9006001: RNCC: 5 | RNVC: 9
A11422: RNCC: 5 | RNVC: 9
ZAJ9006001P: RNCC: 5 | RNVC: 9
445416C1: RNCC: 5 | RNVC: 9
9006001: RNCC: 5 | RNVC: 9

10 Sep 1978

3040-01-156-5804
Shouldered Shaft

011565804
4G13665-103A: RNCC: 3 | RNVC: 2
4G13665-103A: RNCC: 5 | RNVC: 2
4G13665-103A: RNCC: 5 | RNVC: 2
4G13665-103A: RNCC: 5 | RNVC: 2
4G13665-103A: RNCC: 5 | RNVC: 2
4G13665-103A: RNCC: 5 | RNVC: 2
4G13665-103A: RNCC: 5 | RNVC: 2
4G13665-103A: RNCC: 5 | RNVC: 2
4G13665-103A: RNCC: 5 | RNVC: 2
4G13665-103A: RNCC: 5 | RNVC: 2

22 Jun 1983

3040-01-371-8289
Rigid Connecting Link

013718289
NAS359: RNCC: 3 | RNVC: 1
NAS359-81-950: RNCC: 3 | RNVC: 2

24 Feb 1993

3040-01-438-4886
Linear Actuating Cylinder Assembly

014384886
NZ10EEXX3KW120RS-HB102F0: RNCC: 3 | RNVC: 2
7A8-08506: RNCC: 3 | RNVC: 2
7D3-05185 IT NO 5: RNCC: 5 | RNVC: 2
7D3-04979 IT NO 5: RNCC: 5 | RNVC: 2
7D3-04987 IT NO 5: RNCC: 5 | RNVC: 2
7D3-04940 IT NO 5: RNCC: 5 | RNVC: 2
NZ10EEXX3KW120RS-HB102F0: RNCC: 5 | RNVC: 2
TG10EWXX3AACA950: RNCC: 5 | RNVC: 9
CA950: RNCC: 5 | RNVC: 9
NZ10EWXX3AACA950: RNCC: 5 | RNVC: 9

8 Nov 1996

3040-01-378-4959
Nonaircraft Mechanical Actuator

013784959
53460A-1: RNCC: 3 | RNVC: 2
53460-A3: RNCC: 5 | RNVC: 2

21 Aug 1993

3040-01-510-2164
Fixer Housing

015102164
1127062: RNCC: 3 | RNVC: 2
6263547: RNCC: 3 | RNVC: 9

15 Jul 2003

3040-01-538-2105
Rotary Actuating Cylinder Assembly

015382105
8M0208402: RNCC: 3 | RNVC: 2
8M0063382: RNCC: 5 | RNVC: 1
806034A1: RNCC: 5 | RNVC: 9
866-200A01: RNCC: 5 | RNVC: 9
865383A02: RNCC: 5 | RNVC: 9

15 Mar 2006

3040-01-606-0589
Linear Actuating Cylinder

016060589
898349A11: RNCC: 3 | RNVC: 2
898349A01: RNCC: 3 | RNVC: 9
8M0184531: RNCC: 5 | RNVC: 2

4 May 2012

3040-01-706-6699
Control Cam

017066699
N2-21-103-24: RNCC: 3 | RNVC: 2
608-8873413: RNCC: D | RNVC: 9
608-8873413 ITEM 51-2: RNCC: D | RNVC: 9

12 Dec 2022

3040-01-690-1677
Mechanical Drive Housing

016901677
22180-6: RNCC: 3 | RNVC: 2
B-805-22180-8: RNCC: 5 | RNVC: 9
22180: RNCC: D | RNVC: 9

29 Jul 2020

3040-01-706-0440
Shouldered Shaft

017060440
5802498029: RNCC: 3 | RNVC: 2

27 Oct 2022

3040-01-710-9283
Shoe Type Brake

017109283
K23-172-00: RNCC: 3 | RNVC: 2

10 Jul 2023

3040-01-692-9127
Multiple Gears Gearshaft

016929127
8592271-001: RNCC: 3 | RNVC: 2
8000-0398: RNCC: 3 | RNVC: 2
311-8592281: RNCC: D | RNVC: 9

19 Jan 2021

3040-01-711-1759

017111759
DF2103-67 ITEM 14: RNCC: 3 | RNVC: 2
586-8396393 ITEM 14: RNCC: C | RNVC: 1
586-8396393: RNCC: D | RNVC: 9

3040-01-713-7959

017137959
68514410194: RNCC: 3 | RNVC: 2

3040-01-714-5469

017145469
EBV-F2-60-0021-18: RNCC: 3 | RNVC: 2
EBV-F2-60-0021 DET 18: RNCC: D | RNVC: 9

3040-01-714-6052

017146052
IM-LHA8-D5MP00600CEKD: RNCC: 3 | RNVC: 2
WYNN COTS MANUAL PG 29 IDENT 16: RNCC: C | RNVC: 1

3040-01-713-6185

017136185
8199187: RNCC: 3 | RNVC: 2
05175549: RNCC: 5 | RNVC: 2

3040-01-714-4530

017144530
199485-001: RNCC: 3 | RNVC: 2
199485-001: RNCC: 5 | RNVC: 2
169779: RNCC: D | RNVC: 9

3040-01-713-6175

017136175
8199198: RNCC: 3 | RNVC: 2
05175551: RNCC: 5 | RNVC: 2

3040-01-714-2088

017142088
AM146066: RNCC: 3 | RNVC: 2

3040-00-446-7572
Thrust Bearing Shoe

004467572
6-263832-1: RNCC: 3 | RNVC: 2
6-2691-5: RNCC: 3 | RNVC: 2
1111366: RNCC: 3 | RNVC: 2
462691BPC5T07: RNCC: 5 | RNVC: 2
462691PC5T07: RNCC: 5 | RNVC: 2
6-2691-5: RNCC: 5 | RNVC: 2
462691PC5T07: RNCC: 5 | RNVC: 2
462691BPC5T7: RNCC: 5 | RNVC: 2
462691PC5T7: RNCC: 5 | RNVC: 2
464260PC1T3: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-055-3739
Straight Shaft

000553739
4840915H05: RNCC: 3 | RNVC: 2
A3-17: RNCC: 3 | RNVC: 2
AAS-A4-7: RNCC: 3 | RNVC: 2
967: RNCC: 3 | RNVC: 2
SS121: RNCC: 5 | RNVC: 2
G4-14: RNCC: 5 | RNVC: 2
GS-306: RNCC: 5 | RNVC: 2
4840915H05: RNCC: 5 | RNVC: 2
S4-17: RNCC: 5 | RNVC: 9
S4-17: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-01-013-2013
Spring Pawl

010132013
603153: RNCC: 3 | RNVC: 2
3040VE19216: RNCC: 5 | RNVC: 2
603153-1: RNCC: 5 | RNVC: 9

27 Nov 1975

3040-01-194-6691
Transmission Sleeve

011946691
0739752: RNCC: 3 | RNVC: 2
739752: RNCC: 3 | RNVC: 9
424860: RNCC: 5 | RNVC: 9

16 Nov 1984

3040-01-244-8557
Flexible Drive Shaft

012448557
001 542 73 07: RNCC: 3 | RNVC: 2
0015427307: RNCC: 5 | RNVC: 9
001 542 73 07: RNCC: 5 | RNVC: 9
15427307: RNCC: 6 | RNVC: 9
0015427307: RNCC: 6 | RNVC: 9
001 542 73 07: RNCC: C | RNVC: 1

20 Nov 1986

3040-01-145-0530
Rigid Connecting Link

011450530
NAS359: RNCC: 3 | RNVC: 1
NAS359-82-874: RNCC: 3 | RNVC: 2

4 Jan 1983

3040-01-415-2634
Straight Shaft

014152634
J199496: RNCC: 3 | RNVC: 2
H205369D001 ITEM 37: RNCC: 5 | RNVC: 2
B200660D038: RNCC: 5 | RNVC: 9
H205369D001: RNCC: D | RNVC: 9

23 Jun 1995

3040-01-494-3413
Mechanical Drive Housing

014943413
4687407A-0091: RNCC: 3 | RNVC: 2
2641-792-03-0091: RNCC: 5 | RNVC: 2
H525-7609-1: RNCC: 5 | RNVC: 2
H525-7610-11: RNCC: 5 | RNVC: 2
501-7066647-1: RNCC: 5 | RNVC: 2
501-7066648-11: RNCC: 5 | RNVC: 2
845-4687407-0091: RNCC: 5 | RNVC: 9
4687407-0091: RNCC: 5 | RNVC: 9
845-4687407-009: RNCC: C | RNVC: 1
501-7066647: RNCC: D | RNVC: 9

8 Feb 2002

3040-00-606-2055
Rigid Connecting Link

006062055
C3CF452-3: RNCC: 3 | RNVC: 2
TBC3CF452-3: RNCC: 5 | RNVC: 2

1 Jan 1960

3040-01-461-9665
Linear Actuating Cylinder Assembly

014619665
1H2H0A00342539: RNCC: 3 | RNVC: 2
6.00CBB-2HLTVS43C X 38.875: RNCC: 5 | RNVC: 9
5038039: RNCC: 5 | RNVC: 9
AG189989E0: RNCC: 5 | RNVC: 9

13 Jan 1999

3040-00-469-1100
Brake Band And Lining

004691100
AC2103-1: RNCC: 3 | RNVC: 2
AC2103-1: RNCC: 3 | RNVC: 9
3N170PC64: RNCC: 5 | RNVC: 9
59-13: RNCC: 5 | RNVC: 9
3N135PC64: RNCC: 5 | RNVC: 9
1761: RNCC: 5 | RNVC: 9
3N76PC59: RNCC: 5 | RNVC: 9
59-4: RNCC: 5 | RNVC: 9
NN76PC59: RNCC: 5 | RNVC: 9
3N177PC64: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-965-7394
Linear Actuating Cylinder Assembly

009657394
65C35397-3: RNCC: 1 | RNVC: 2
3A18D4: RNCC: 3 | RNVC: 9
91200-243: RNCC: 5 | RNVC: 2
65C35397-3: RNCC: 5 | RNVC: 9
91200-243: RNCC: 5 | RNVC: 9
2614256-2: RNCC: 5 | RNVC: 9
3A18D4: RNCC: 5 | RNVC: 9
000993-269: RNCC: 5 | RNVC: 9
65C35397-3: RNCC: 5 | RNVC: 9
3040PL0893350: RNCC: 6 | RNVC: 9

1 Jun 1966

3040-01-706-5277
Linear Actuating Cylinder Assembly

017065277
20-214: RNCC: 3 | RNVC: 2

2 Dec 2022

3040-01-703-0050
Linear Actuating Cylinder Assembly

017030050
1H2H0A00296531: RNCC: 3 | RNVC: 2

11 Aug 2022

3040-01-698-2402
Brake Disc

016982402
70024849: RNCC: 3 | RNVC: 2

4 Nov 2021

3040-01-478-4417
Expander Tube Brake

014784417
52D3368-1: RNCC: 3 | RNVC: 2
52D3368-1: RNCC: 5 | RNVC: 2
AD-2331332-1: RNCC: 5 | RNVC: 2
52D3368: RNCC: D | RNVC: 9

12 Sep 2000

3040-01-699-4342
Manual Control Lever

016994342
29557835: RNCC: 3 | RNVC: 2
5802024831: RNCC: 5 | RNVC: 2

31 Jan 2022

3040-01-137-0391
Brake Disc

011370391
CMD-185-7: RNCC: 3 | RNVC: 9
AHA0200-112-201: RNCC: 5 | RNVC: 2

19 Aug 1982

3040-00-544-1537
Drive Shaft

005441537
064-25658-000: RNCC: 3 | RNVC: 2
364-31748EPC61: RNCC: 5 | RNVC: 2
664-25658-000: RNCC: 5 | RNVC: 9
664-25658: RNCC: 5 | RNVC: 9
064-25658: RNCC: 5 | RNVC: 9
664-25658: RNCC: 5 | RNVC: 9
064-25658D: RNCC: C | RNVC: 1
364-31748ITEM61: RNCC: C | RNVC: 1

6 Oct 1974

3040-01-643-2537
Straight Shaft

016432537
PAAI063664: RNCC: 3 | RNVC: 2
DAAK105712 SEQ 001: RNCC: 5 | RNVC: 2
DAAF459402 REV - SEQ 001: RNCC: D | RNVC: 9

25 Mar 2015

3040-01-707-4472
Belt-Chain Tension Adjusting Device

017074472
T39017: RNCC: 3 | RNVC: 2

2 Feb 2023

3040-01-714-6059

017146059
PU-53344: RNCC: 3 | RNVC: 2
3FP69: RNCC: 5 | RNVC: 2

3040-01-714-5569

017145569
512-8839672-11-4: RNCC: 3 | RNVC: 2
R6432612-11-4: RNCC: 5 | RNVC: 2
LSA005045/B-11-4: RNCC: 5 | RNVC: 2
LSA005045/B: RNCC: D | RNVC: 9

3040-01-710-6767
Linear Actuating Cylinder Piston Rod

017106767
112157165: RNCC: 3 | RNVC: 2

15 Jun 2023

3040-01-506-3719
Linear Actuating Cylinder Assembly

015063719
1H2H0A00333956: RNCC: 3 | RNVC: 2
1H000196484: RNCC: 5 | RNVC: 9
2.50CBB2HLTVS14AC15.375: RNCC: 5 | RNVC: 9
GG519546PA: RNCC: 5 | RNVC: 9

28 Mar 2003

3040-01-525-7068
Oil Distribution Box Shaft Assembly

20 Nov 2004

3040-01-713-8963

017138963
H0034N: RNCC: 3 | RNVC: 2

3040-00-272-4481
Rigid Connecting Link

002724481
4500-265: RNCC: 3 | RNVC: 2
68B618000-265: RNCC: 5 | RNVC: 2
4032-7: RNCC: 5 | RNVC: 9

30 Jul 1973

3040-00-239-4823
Shaft Collar

002394823
10188086-001: RNCC: 3 | RNVC: 2
AD-2331062-017: RNCC: 5 | RNVC: 1
SC150: RNCC: 5 | RNVC: 2
52E768-40: RNCC: 5 | RNVC: 2
SC-1 1/2: RNCC: 5 | RNVC: 2
32X117: RNCC: 5 | RNVC: 2
67719: RNCC: 5 | RNVC: 2
D1489C: RNCC: 5 | RNVC: 9
M19383: RNCC: 5 | RNVC: 9
M21375: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-580-9585
Shaft Collar

005809585
0164CPC006001133: RNCC: 3 | RNVC: 2
006-0011-33: RNCC: 3 | RNVC: 2
3DPN36GTPC4-297: RNCC: 3 | RNVC: 2
D-0489 ITEM 13 1IN: RNCC: 3 | RNVC: 2
4-33-297: RNCC: 3 | RNVC: 2
3DPN36GTPC4-22-297: RNCC: 3 | RNVC: 2
4-33-297EPCALL: RNCC: 5 | RNVC: 9
580-516-1609906LINE6: RNCC: 5 | RNVC: 9
580-516-1609906LINE6: RNCC: 5 | RNVC: 9
3328644PC006001133: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-843-4388
Straight Shaft

008434388
A3-20: RNCC: 3 | RNVC: 2
12282301-3: RNCC: 3 | RNVC: 2
4188809-1: RNCC: 5 | RNVC: 2
4188809-1: RNCC: 5 | RNVC: 2
888-9541: RNCC: 5 | RNVC: 9
S4-20: RNCC: 5 | RNVC: 9
S4-20: RNCC: 5 | RNVC: 9
3040008434388: RNCC: 5 | RNVC: 9
G4-16: RNCC: 5 | RNVC: 9
G4-16: RNCC: C | RNVC: 1

1 Jan 1963

3040-01-089-4205
Linear Actuating Cylinder Piston

010894205
R431002744: RNCC: 3 | RNVC: 2
P50734: RNCC: 3 | RNVC: 9

1 Feb 1980

3040-01-074-3334
Eccentric Shaft

010743334
2078987-1: RNCC: 3 | RNVC: 2
833318-1: RNCC: E | RNVC: 8

30 Mar 1979

3040-01-107-7543
Rigid Connecting Link

011077543
74A450920-2001: RNCC: 3 | RNVC: 2
74A450920-2001: RNCC: 5 | RNVC: 2
74A450920-2001: RNCC: 5 | RNVC: 2
74A450920-2001: RNCC: 5 | RNVC: 2
74A450920-2001: RNCC: 5 | RNVC: 2
74A450920-2001: RNCC: 5 | RNVC: 2
74A450920-2001: RNCC: 5 | RNVC: 2
74A450920-2001: RNCC: 5 | RNVC: 2
74A450920-2001: RNCC: 5 | RNVC: 2
74A450920-2001: RNCC: 5 | RNVC: 9

12 Feb 1981

3040-01-119-8855
Shouldered Shaft

011198855
RG38189: RNCC: 3 | RNVC: 2
3040011198855: RNCC: 5 | RNVC: 9

7 Oct 1981

3040-01-139-4485
Rigid Connecting Link

011394485
NAS356: RNCC: 3 | RNVC: 1
NAS356-81-1550: RNCC: 3 | RNVC: 2

1 Oct 1982

3040-01-145-0529
Rigid Connecting Link

011450529
NAS356: RNCC: 3 | RNVC: 1
NAS356-84-1500: RNCC: 3 | RNVC: 2

4 Jan 1983

3040-01-145-0526
Rigid Connecting Link

011450526
NAS356: RNCC: 3 | RNVC: 1
NAS356-64-590: RNCC: 3 | RNVC: 2

4 Jan 1983

3040-01-144-7313
Rigid Connecting Link

011447313
NAS356: RNCC: 3 | RNVC: 1
NAS356-64-700: RNCC: 3 | RNVC: 2

27 Dec 1982

3040-01-179-3042
Linear Actuating Cylinder Piston Rod

011793042
101A821AA PIECE 1: RNCC: 3 | RNVC: 2
501E457AA PIECE 37: RNCC: 3 | RNVC: 2
3133849: RNCC: 5 | RNVC: 2
501E457AA PIECE 37: RNCC: 5 | RNVC: 9
101A821AA PIECE 1: RNCC: 5 | RNVC: 9
101A821AA1: RNCC: 5 | RNVC: 9
E-3288508 PIECE 37: RNCC: 5 | RNVC: 9
101A821AA PIECE 1: RNCC: 5 | RNVC: 9
501E457AA PIECE 37: RNCC: 5 | RNVC: 9
101A821AA: RNCC: D | RNVC: 9

16 May 1984

3040-01-240-0054
Control Cam

012400054
7002541: RNCC: 3 | RNVC: 2
3040PL2055156: RNCC: 6 | RNVC: 9

7 Sep 1986

3040-01-256-5338
Flexible Shaft Access Kit

012565338
57717-00: RNCC: 3 | RNVC: 2
40042593: RNCC: 5 | RNVC: 2
RMOP0130: RNCC: 5 | RNVC: 2
57717: RNCC: 5 | RNVC: 9
P0D-57717: RNCC: D | RNVC: 9

5 Jun 1987

3040-01-371-7772
Manual Control Lever

013717772
SW33455: RNCC: 3 | RNVC: 2
3040013717772: RNCC: 5 | RNVC: 9

23 Feb 1993

3040-01-479-5113
Linear Actuating Cylinder

014795113
41459: RNCC: 3 | RNVC: 2
CC79490-001: RNCC: 3 | RNVC: 2
CC79490-00: RNCC: 5 | RNVC: 2
CC71760-001: RNCC: 5 | RNVC: 9
30078-41470 ITEM 9: RNCC: 5 | RNVC: 9
30096-41450 ITEM 9: RNCC: 5 | RNVC: 9
30096-41450: RNCC: D | RNVC: 9
30078-41470: RNCC: D | RNVC: 9

24 Oct 2000

3040-01-469-2443
Linear Actuating Cylinder Assembly

014692443
1H2H0A00274066: RNCC: 3 | RNVC: 2
AG201176G0: RNCC: 3 | RNVC: 9

9 Nov 1999

3040-01-468-0457
Linear Actuating Cylinder Assembly

014680457
1H2H0A00274038: RNCC: 3 | RNVC: 2
AG201170G0: RNCC: 5 | RNVC: 9

27 Sep 1999

3040-01-527-7479
Rigid Connecting Link

015277479
11581548: RNCC: 3 | RNVC: 2
E1211903SB: RNCC: 5 | RNVC: 2

16 Feb 2005

3040-01-711-2280

017112280
5146T77G01: RNCC: 3 | RNVC: 2
5146T77: RNCC: D | RNVC: 9

3040-01-714-2065

017142065
875-12-40-09-B1B1: RNCC: 3 | RNVC: 2

3040-01-616-2638
Pivot Shaft Assembly

016162638
3J-270973: RNCC: 3 | RNVC: 2
EP-0015579: RNCC: 5 | RNVC: 2

7 Feb 2013

3040-01-700-2983
Linear Actuating Cylinder Assembly

017002983
90535: RNCC: 3 | RNVC: 2

23 Mar 2022

3040-01-706-8030
Linear Actuating Cylinder Assembly

017068030
6810233: RNCC: 3 | RNVC: 2

20 Dec 2022

3040-01-711-2039

017112039
5147T29P01: RNCC: 3 | RNVC: 2
5147T29: RNCC: D | RNVC: 9

3040-00-364-3307
Shouldered Shaft

003643307
23500714: RNCC: 3 | RNVC: 2
1DD467: RNCC: 5 | RNVC: 2
FP23500714: RNCC: 5 | RNVC: 2
5150322: RNCC: 5 | RNVC: 9
5150322: RNCC: 5 | RNVC: 9
5150322: RNCC: 5 | RNVC: 9
1DD467: RNCC: 5 | RNVC: 9
002080T: RNCC: 5 | RNVC: 9
K23500714: RNCC: 5 | RNVC: 9
5105322: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-614-8550
Hub Clamp

006148550
L1-4: RNCC: 3 | RNVC: 2
CG-71: RNCC: 3 | RNVC: 2
7423227P4: RNCC: 5 | RNVC: 2
10548111-3: RNCC: 5 | RNVC: 2
7423227P4: RNCC: 5 | RNVC: 9
CG3-1: RNCC: 5 | RNVC: 9
DL14: RNCC: 5 | RNVC: 9
1047270-1: RNCC: 5 | RNVC: 9
1053592-1: RNCC: 5 | RNVC: 9
61-4: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-614-7085
Remote Control Lever

006147085
6147085: RNCC: 3 | RNVC: 2
181716: RNCC: 5 | RNVC: 2
201050012: RNCC: 5 | RNVC: 2
A10280: RNCC: 5 | RNVC: 2
3662004602: RNCC: 5 | RNVC: 2
366-200-4602: RNCC: 5 | RNVC: 9
1005006147085: RNCC: 5 | RNVC: 9
6147085: RNCC: 5 | RNVC: 9
10056147085: RNCC: 5 | RNVC: 9
3040PL0911497: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-715-7033
Hub Clamp

007157033
968-7C: RNCC: 3 | RNVC: 2
SCM187: RNCC: 3 | RNVC: 2
412589-1: RNCC: 5 | RNVC: 2
CG112: RNCC: 5 | RNVC: 2
419339-1: RNCC: 5 | RNVC: 2
215-002-0001: RNCC: 5 | RNVC: 2
10002183: RNCC: 5 | RNVC: 2
63C807-001: RNCC: 5 | RNVC: 9
4B18: RNCC: 5 | RNVC: 9
4B18: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-925-4648
Rigid Connecting Link

009254648
NAS356: RNCC: 3 | RNVC: 1
NAS356-64-1360: RNCC: 3 | RNVC: 2

20 Jan 1966

3040-00-839-2064
Rigid Connecting Link

008392064
NAS356: RNCC: 3 | RNVC: 1
NAS356-81-1100: RNCC: 3 | RNVC: 2

14 Dec 1966

3040-01-005-8770
Spur Gearshaft

010058770
125C3821: RNCC: 3 | RNVC: 2
125C3821: RNCC: 3 | RNVC: 9
BB-2461: RNCC: 5 | RNVC: 2
125C3821: RNCC: 5 | RNVC: 9
125C3821: RNCC: 7 | RNVC: 2

6 Jul 1975

3040-01-084-0539
Hydraulic Actuator Piston Rack

010840539
CB27571-001: RNCC: 3 | RNVC: 2
400-26990 ITEM 3: RNCC: 5 | RNVC: 2
400-26990 REV A PIECE 3: RNCC: 5 | RNVC: 9
29466: RNCC: 5 | RNVC: 9
400-26990: RNCC: D | RNVC: 9

7 Oct 1979

3040-01-055-5937
Sprocket Shaft

010555937
167C2239: RNCC: 3 | RNVC: 2
167C1611: RNCC: 5 | RNVC: 9
3040PL0664552: RNCC: 6 | RNVC: 9
3040PL1958870: RNCC: 6 | RNVC: 9

8 Feb 1978

3040-01-119-0795
Rigid Connecting Link

011190795
NAS356: RNCC: 3 | RNVC: 1
NAS356-64-1153: RNCC: 3 | RNVC: 2

16 Sep 1981

3040-01-138-1985
Valve Shaft

011381985
51740C576: RNCC: 3 | RNVC: 2
740C576: RNCC: 3 | RNVC: 9
911-511 PIECE 4 740C576: RNCC: 5 | RNVC: 9
911-517 PIECE 4 PART 740C576: RNCC: 5 | RNVC: 9
911-518 PART 740C576: RNCC: 5 | RNVC: 9
911-518 REF 4 10 IN: RNCC: 5 | RNVC: 9
911-519 PART 740C576: RNCC: 5 | RNVC: 9
911-519 REF 4 12 IN: RNCC: 5 | RNVC: 9
911-417 PIECE 4 PART 740C576: RNCC: 5 | RNVC: 9
911-509 ITEM 4 PART 740C576: RNCC: 5 | RNVC: 9

8 Sep 1982

3040-01-204-7980
Shouldered Shaft

012047980
S2419J: RNCC: 3 | RNVC: 2
S2419J0221: RNCC: 3 | RNVC: 2
SG2570PC106: RNCC: 5 | RNVC: 2
SG3106PC106: RNCC: 5 | RNVC: 2
SG2501PC106: RNCC: 5 | RNVC: 2
SG2572PC106: RNCC: 5 | RNVC: 2
SG-4364 PIECE 106: RNCC: 5 | RNVC: 2
SG-4364 PIECE 106: RNCC: 5 | RNVC: 9
S-2419J: RNCC: 5 | RNVC: 9
S2419J0221: RNCC: 5 | RNVC: 9

29 Mar 1985

3040-01-386-5657
Shaft Retaining Plate

013865657
SW26685: RNCC: 3 | RNVC: 2
3040013865657: RNCC: 5 | RNVC: 9

8 Feb 1994

3040-01-397-7867
Mechanical Drive Housing

013977867
S-18282-001: RNCC: 3 | RNVC: 2
S18282-001: RNCC: 3 | RNVC: 2
18065 ITEM 19: RNCC: 5 | RNVC: 9
18282-1: RNCC: 5 | RNVC: 9
S-18282-001: RNCC: 5 | RNVC: 9
18065: RNCC: D | RNVC: 9

20 Oct 1994

3040-01-524-8526
Differential Spider

015248526
L050HYT-SOX: RNCC: 3 | RNVC: 2
L050HYT-SOW: RNCC: 5 | RNVC: 9
L050HYT: RNCC: 5 | RNVC: 9

19 Oct 2004

3040-01-578-0122
Spur Gearshaft

015780122
3T5851: RNCC: 3 | RNVC: 2
3T-5851: RNCC: 5 | RNVC: 2

24 Sep 2009

3040-01-698-6554
Rotary Actuating Cylinder Assembly

016986554
341B13080SE0008-101: RNCC: 3 | RNVC: 2

1 Dec 2021

3040-01-697-9163
Linear Actuating Cylinder Assembly

016979163
40177593: RNCC: 3 | RNVC: 1
40177593: RNCC: 5 | RNVC: 1

19 Oct 2021

3040-01-714-4519

017144519
199484-001: RNCC: 3 | RNVC: 2
199484-001: RNCC: 5 | RNVC: 2
169779: RNCC: D | RNVC: 9

3040-01-713-5248

017135248
2232030: RNCC: 3 | RNVC: 2
2232030: RNCC: 5 | RNVC: 2

3040-01-711-1309

017111309
CC73659-001: RNCC: 3 | RNVC: 2
CC73649-9: RNCC: C | RNVC: 1
CC73649: RNCC: D | RNVC: 9

3040-00-854-0808
Linear Actuating Cylinder Assembly

25 Sep 1967

3040-01-711-7606

017117606
2107723: RNCC: 3 | RNVC: 2

3040-01-461-2812
Linear Actuating Cylinder Assembly

7 Dec 1998

3040-01-714-5594

017145594
512-8839672-26-4: RNCC: 3 | RNVC: 2
LSA005045/B-26-4: RNCC: 5 | RNVC: 2
R6432612-26-4: RNCC: 5 | RNVC: 2
LSA005045/B: RNCC: D | RNVC: 9

3040-01-714-4689

017144689
V14611-02-01: RNCC: 3 | RNVC: 2
V14613: RNCC: 3 | RNVC: 9

3040-01-708-6105
Linear Actuating Cylinder Assembly

017086105
REN08-22: RNCC: 3 | RNVC: 2

13 Apr 2023

3040-01-714-2636

017142636
HST1570ZBWT8: RNCC: 3 | RNVC: 2
HST1570: RNCC: D | RNVC: 9

3040-01-713-7661

017137661
12640830: RNCC: 3 | RNVC: 2
12640830: RNCC: C | RNVC: 1

3040-01-711-7592

017117592
845-8617288 ASSY A: RNCC: 3 | RNVC: 2
8617288: RNCC: 3 | RNVC: 9

3040-01-711-2134

017112134
5154T36P02: RNCC: 3 | RNVC: 2

3040-01-703-0855
Linear Hydraulic-Pneumatic Actuator

017030855
VLCT55-0300-120R-AP2: RNCC: 3 | RNVC: 2
VLCT55-0300-120R-AP2: RNCC: 5 | RNVC: 9

16 Aug 2022

3040-01-185-3605
Linear Actuating Cylinder Assembly

27 Jul 1984

3040-01-713-6166

017136166
8199158: RNCC: 3 | RNVC: 2
04078304: RNCC: 5 | RNVC: 2

3040-01-713-8356

017138356
218K460G02: RNCC: 3 | RNVC: 2
218K460: RNCC: D | RNVC: 9

3040-01-714-4301

017144301
FP3243: RNCC: 3 | RNVC: 2

3040-01-714-3943

017143943
419-9380: RNCC: 3 | RNVC: 2

3040-01-714-0119

017140119
HS03401CP-USM: RNCC: 3 | RNVC: 2
J16266002-3: RNCC: 5 | RNVC: 2

3040-01-358-8874
Mechanic Crankshaft

013588874
4375-00176: RNCC: 3 | RNVC: 9
01-404375-00176: RNCC: 5 | RNVC: 2

22 May 1992

3040-01-203-8620
Linear Actuating Cylinder Assembly

20 Mar 1985

3040-00-355-4459
Manual Control Lever

003554459
DLHANDLE: RNCC: 3 | RNVC: 2
DL-HANDLE: RNCC: 5 | RNVC: 2
DLHANDLE: RNCC: 5 | RNVC: 2
584R721H06: RNCC: 5 | RNVC: 2
195-0256-001: RNCC: 5 | RNVC: 2
204-0016-000: RNCC: 5 | RNVC: 2
11830708: RNCC: 7 | RNVC: 2
1222397-203: RNCC: C | RNVC: 1
61814259-001: RNCC: C | RNVC: 1
7906470-02: RNCC: C | RNVC: 1

6 Feb 1974

3040-01-340-6017
Linear Actuating Cylinder Assembly

17 Jun 1991

3040-01-714-0490

017140490
3993AS222-1: RNCC: 3 | RNVC: 2
3993AS222: RNCC: D | RNVC: 9

3040-01-700-8600
Linear Actuating Cylinder

017008600
20-219: RNCC: 3 | RNVC: 2

18 Apr 2022

3040-01-568-9059
Linear Actuating Cylinder Assembly

015689059
AHC17465: RNCC: 3 | RNVC: 2
AH154123: RNCC: 5 | RNVC: 9

13 Nov 2008

3040-01-713-4312

017134312
3890AS004789-01: RNCC: 3 | RNVC: 2
3890AS004789: RNCC: D | RNVC: 9

3040-01-713-6217

017136217
5148T26P01: RNCC: 3 | RNVC: 2
5148T26: RNCC: D | RNVC: 9

3040-01-713-5884

017135884
8199157: RNCC: 3 | RNVC: 2
04078302: RNCC: 5 | RNVC: 2

3040-01-714-5858

017145858
512-8839672-51-4: RNCC: 3 | RNVC: 2
LSA005045-51-4: RNCC: 5 | RNVC: 2
R6432612-51-4: RNCC: 5 | RNVC: 2
8839672 REV B SHEET 15 FIND 51-4: RNCC: C | RNVC: 1
8839672: RNCC: D | RNVC: 9

3040-01-714-4379

017144379
31-15-6857: RNCC: 3 | RNVC: 2

3040-01-714-5943

017145943
512-8839672-12-4: RNCC: 3 | RNVC: 2
R6432612-12-4: RNCC: 5 | RNVC: 2
LSA005045/B-12-4: RNCC: 5 | RNVC: 2
8839672 REV B SHEET 14 FIND 12-4: RNCC: C | RNVC: 1
8839672: RNCC: D | RNVC: 9

3040-01-714-6006

017146006
512-8839672-37-4: RNCC: 3 | RNVC: 2
R6432612-37-4: RNCC: 5 | RNVC: 2
LSA005045/B-37-4: RNCC: 5 | RNVC: 2
8839672 REV B SHEET 15 FIND 37-4: RNCC: C | RNVC: 1

3040-01-574-0711
Rigid Connecting Link

14 May 2009

3040-01-713-7250

017137250
12640838: RNCC: 3 | RNVC: 2
12640838: RNCC: C | RNVC: 1

3040-01-714-6133

017146133
512-8839672-13-4: RNCC: 3 | RNVC: 2
R6432612-13-4: RNCC: 5 | RNVC: 2
LSA005045/B-13-4: RNCC: 5 | RNVC: 2
8839672 REV B SHEET 14 FIND 13-4: RNCC: C | RNVC: 1
8839672: RNCC: D | RNVC: 9

3040-01-713-8661

017138661
968071-01: RNCC: 3 | RNVC: 2
A32064 REV A: RNCC: 5 | RNVC: 2
S6226-JZ-MMA-010 7-15-65: RNCC: C | RNVC: 1
A32064: RNCC: D | RNVC: 9

3040-01-677-7997
Rigid Connecting Link

8 Jan 2019

3040-01-706-8188
Linear Actuating Cylinder Assembly

017068188
7106456: RNCC: 3 | RNVC: 2

21 Dec 2022

3040-00-544-5910
Control Cam

005445910
73389: RNCC: 3 | RNVC: 2
73389REVC: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-550-4825
Mechanical Drive Housing

005504825
5504825: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-547-1248
Brake Disc

005471248
S100126: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-01-120-0167
Linear Actuating Cylinder Assembly

9 Oct 1981

3040-01-467-8804
Linear Actuating Cylinder Assembly Parts Kit

17 Sep 1999

3040-01-572-6922
Linear Actuating Cylinder Piston Rod

20 Mar 2009

3040-01-567-1271
Linear Actuating Cylinder Assembly

18 Sep 2008

3040-01-671-9770
Extension Shaft

17 Apr 2018

3040-01-709-0635
Linear Actuating Cylinder Assembly

017090635
P1D-B100MC-0800: RNCC: 3 | RNVC: 2

9 May 2023

3040-01-206-1935
Worm Wheel Gearshaft

15 Apr 1985

3040-01-442-4954
Linear Actuating Cylinder Assembly

17 Mar 1997

3040-01-417-9421
Linear Actuating Cylinder Assembly

17 Aug 1995

3040-01-671-1251
Linear Actuating Cylinder Assembly

15 Mar 2018

3040-00-810-5092
Straight Shaft

008105092
9000-200: RNCC: 3 | RNVC: 2

9 Jan 1987

3040-00-814-0340
Bell Crank

008140340
128LM10300-1: RNCC: 3 | RNVC: 2
128LM10300-1: RNCC: 5 | RNVC: 9

27 Mar 1968

3040-00-813-7448
Manual Control Lever

008137448
10173: RNCC: 3 | RNVC: 9

27 Mar 1968

3040-01-476-0515
Linear Actuating Cylinder Assembly

23 Jun 2000

3040-00-762-5919
Fuel Control Shaft

007625919
595994: RNCC: 3 | RNVC: 2

20 Feb 1970

3040-00-763-2201
Straight Shaft

007632201
7444510: RNCC: 3 | RNVC: 2
7444510P1: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-01-707-9145
Linear Actuating Cylinder Assembly

017079145
5775LQ: RNCC: 3 | RNVC: 2
ACVE0243500: RNCC: 5 | RNVC: 2
LIFT-O-MAT: RNCC: 5 | RNVC: 2

3 Mar 2023

3040-00-652-6305
Worm Shaft

006526305
8759232: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-652-0194
Rigid Connecting Link

006520194
111WM1070-1L: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-01-702-9627
Linear Hydraulic-Pneumatic Actuator

017029627
160G4150: RNCC: 3 | RNVC: 2

9 Aug 2022

3040-01-247-6377
Rotating Shaft Eye Bracket

9 Jan 1987

3040-00-925-5276
Shouldered Shaft

009255276
104870: RNCC: 3 | RNVC: 2

20 Jan 1966

3040-00-923-5932
Rigid Connecting Link

009235932
305-523264-31: RNCC: 3 | RNVC: 9
305-523264-21: RNCC: 5 | RNVC: 9

19 Apr 1968

3040-00-922-6103
Flexible Shaft Assembly

009226103
G287-006-002: RNCC: 3 | RNVC: 2
G287-006-002: RNCC: 5 | RNVC: 9

19 Apr 1968

3040-00-896-6640
Focusing Shaft

008966640
547A002652: RNCC: 3 | RNVC: 2
A547-210: RNCC: 3 | RNVC: 2
A547-210: RNCC: 5 | RNVC: 9
547A002652: RNCC: C | RNVC: 1
A-547.210: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-925-7606
Turbine Engine Counter Balance Weight

009257606
541156CL1: RNCC: 3 | RNVC: 2
541156CL1: RNCC: 5 | RNVC: 9

24 Jan 1966

3040-00-922-8018
Shouldered Shaft

009228018
11699485: RNCC: 3 | RNVC: 2
11699485: RNCC: C | RNVC: 1

25 Dec 1965

3040-00-924-6528
Rigid Connecting Link

009246528
12C762-801: RNCC: 3 | RNVC: 2

20 Jan 1966

3040-00-922-8019
Shouldered Shaft

009228019
11699486: RNCC: 3 | RNVC: 2
11699486: RNCC: C | RNVC: 1

25 Dec 1965

3040-00-897-7011
Shouldered Shaft

008977011
370290: RNCC: 3 | RNVC: 9
370290: RNCC: 5 | RNVC: 2
370290: RNCC: C | RNVC: 1

1 Jan 1962

3040-01-076-1754
Shouldered Shaft

010761754
21006807-101: RNCC: 3 | RNVC: 2

2 May 1979

3040-01-068-3671
Shaft

010683671
769113-1: RNCC: 3 | RNVC: 2

23 Nov 1978

3040-01-070-0542
Shaft Collar

010700542
75511041-1: RNCC: 3 | RNVC: 9
75511041-1: RNCC: 5 | RNVC: 9

31 Dec 1978

3040-01-071-8325
Nonaircraft Mechanical Actuator

010718325
441083-1: RNCC: 3 | RNVC: 2
441083-2: RNCC: 5 | RNVC: 2
4052339: RNCC: 5 | RNVC: 9
4052339: RNCC: 5 | RNVC: 9
441083: RNCC: 5 | RNVC: 9

15 Feb 1979

3040-01-068-9630
Straight Shaft

010689630
16C0104-9: RNCC: 3 | RNVC: 2

7 Dec 1978

3040-01-067-9372
Bell Crank

010679372
767031-1: RNCC: 3 | RNVC: 2

10 Nov 1978

3040-01-068-9744
Straight Shaft

010689744
4S8531: RNCC: 3 | RNVC: 2

7 Dec 1978

3040-01-069-0153
Spur Gearshaft

010690153
2009070-1: RNCC: 3 | RNVC: 2
2009070: RNCC: D | RNVC: 9

7 Dec 1978

3040-01-071-8522
Shouldered Shaft

010718522
755017A8212: RNCC: 3 | RNVC: 2

15 Feb 1979

3040-01-068-1059
Spline Hub

010681059
310682: RNCC: 3 | RNVC: 2
310682: RNCC: 5 | RNVC: 9

16 Nov 1978

3040-01-071-1150
Spur Gearshaft

010711150
699602013/2: RNCC: 3 | RNVC: 2

29 Jan 1979

3040-01-070-0155
Friction Lining

010700155
2003151: RNCC: 3 | RNVC: 2
1248442-01: RNCC: 5 | RNVC: 9

30 Dec 1978

3040-01-068-0031
Bellcrank A

010680031
1-4N4984,2-3K6662: RNCC: 3 | RNVC: 2
4N4982: RNCC: 5 | RNVC: 2

14 Nov 1978

3040-01-071-1653
Bevel Gearshaft

010711653
767955-1: RNCC: 3 | RNVC: 2

31 Jan 1979

3040-01-075-9931
Shouldered Shaft

010759931
3167564: RNCC: 3 | RNVC: 2

30 Apr 1979

3040-01-071-4830
Counterbalance Weight

010714830
A334A099-109: RNCC: 3 | RNVC: 2

8 Feb 1979

3040-00-894-1897
Shouldered Shaft

008941897
4822394-501: RNCC: 3 | RNVC: 2

25 Jan 1967

3040-00-896-1837
Manual Control Lever

008961837
531682: RNCC: 3 | RNVC: 2
531682: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-923-8409
Spur Gearshaft

009238409
1522370: RNCC: 3 | RNVC: 2
1522370: RNCC: 5 | RNVC: 2

1 Jan 1960

3040-00-897-4245
Shouldered Shaft

008974245
2522126: RNCC: 3 | RNVC: 2
2522126: RNCC: 5 | RNVC: 9

30 Jan 1967

3040-00-894-1785
Anti Spur Gearshaft

008941785
43511023: RNCC: 3 | RNVC: 9
43511023: RNCC: 5 | RNVC: 9

25 Jan 1967

3040-00-895-8291
Friction Lining

008958291
A308369: RNCC: 3 | RNVC: 2
353613: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-924-9128
Shouldered Shaft

009249128
107B8003P1: RNCC: 3 | RNVC: 2

14 Jan 1966

3040-00-923-5070
Rigid Connecting Link

009235070
134LM40003-1: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-923-8414
Multiple Gears Gearshaft

009238414
1522377: RNCC: 3 | RNVC: 2
1522377: RNCC: 5 | RNVC: 2

1 Jan 1960

3040-00-897-9490
Remote Control Lever

008979490
142871: RNCC: 3 | RNVC: 2
142871: RNCC: 5 | RNVC: 9
142871: RNCC: C | RNVC: 1

1 Jan 1962

3040-01-709-1803
Rotary Actuating Cylinder Assembly

017091803
140-1768: RNCC: 3 | RNVC: 2

16 May 2023

3040-01-703-2867
Linear Actuating Cylinder Assembly Parts Kit

017032867
PK252HH004: RNCC: 3 | RNVC: 2

26 Aug 2022

3040-01-388-4709
Linear Actuating Cylinder Assembly

013884709
04WH-C-0016: RNCC: 3 | RNVC: 2
4WHC32YKA: RNCC: 3 | RNVC: 9
4WHC32KY: RNCC: 5 | RNVC: 2
4WHC32YKAOU29137-7: RNCC: 5 | RNVC: 9

31 Mar 1994

3040-01-462-7594
Nonaircraft Mechanical Actuator

014627594
58193-00: RNCC: 3 | RNVC: 2
40036775: RNCC: 5 | RNVC: 2
RMOP0132: RNCC: 5 | RNVC: 2
58193: RNCC: 5 | RNVC: 9
P-2272 58193-00: RNCC: 5 | RNVC: 9
P-2272: RNCC: D | RNVC: 9

17 Feb 1999

3040-01-293-1855
Linear Actuating Cylinder Assembly

28 Jan 1989

3040-01-527-5356
Linear Actuating Cylinder Assembly

7 Feb 2005

3040-01-516-3957
Shouldered Shaft

6 Jan 2004

3040-01-714-5810

017145810
512-8839672-27-4: RNCC: 3 | RNVC: 2
R6432612-27-4: RNCC: 5 | RNVC: 2
LSA005045/B-27-4: RNCC: 5 | RNVC: 2
8839672 REV B SHEET 14 FIND 27-4: RNCC: C | RNVC: 1
8839672: RNCC: D | RNVC: 9

3040-01-513-7427
Linear Actuating Cylinder Piston Rod

4 Oct 2003

3040-01-567-7435
Pneumatic Actuator Cylinder Housing

6 Oct 2008

3040-01-687-7044
Shouldered Shaft

14 Apr 2020

3040-01-699-3327
Linear Actuating Cylinder Assembly

016993327
373541-1: RNCC: 3 | RNVC: 2

24 Jan 2022

3040-01-700-6897
Linear Hydraulic-Pneumatic Actuator

017006897
LA589DCIM: RNCC: 3 | RNVC: 2
LA589DCIMTR: RNCC: 5 | RNVC: 2

7 Apr 2022

3040-00-248-3954
Flexible Shafting

002483954
S09192-100: RNCC: 3 | RNVC: 2
MILS16059: RNCC: 4 | RNVC: 1
S08892-100 X 50 FEET: RNCC: 5 | RNVC: 9
8892-12 .500 RC-SST-SA CORE RH: RNCC: 5 | RNVC: 9
8892R50FT: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-648-4709
Rotary Actuating Cylinder Assembly

016484709
12446354-1: RNCC: 3 | RNVC: 2
12446354: RNCC: D | RNVC: 9

25 Sep 2015

3040-01-677-2643
Shouldered Shaft

4 Dec 2018

3040-01-567-2729
Linear Actuating Cylinder Assembly

22 Sep 2008

3040-01-578-3192
Planetary Gears Carrier

1 Oct 2009

3040-01-680-2302
Hose Reel Brake Wheel Assembly

24 Apr 2019

3040-01-160-9138
Shouldered Shaft

011609138
08565-20043: RNCC: 3 | RNVC: 2
08565-20043: RNCC: 3 | RNVC: 9
08565-20043: RNCC: 5 | RNVC: 9

29 Aug 1983

3040-01-162-7644
Shaft Retaining Plate

011627644
218P1015: RNCC: 3 | RNVC: 2

22 Sep 1983

3040-01-157-6302
Linear Actuating Cylinder Assembly

011576302
17031: RNCC: 3 | RNVC: 9

9 Jul 1983

3040-01-155-5888
Rigid Connecting Link

011555888
CL-5SP-18: RNCC: 3 | RNVC: 2
8V5049: RNCC: 5 | RNVC: 2
S3831: RNCC: 5 | RNVC: 2

11 Jun 1983

3040-01-162-7641
Rigid Connecting Link

011627641
1267400: RNCC: 3 | RNVC: 2
7S5384: RNCC: 5 | RNVC: 2

22 Sep 1983

3040-00-594-5069
Spur Gearshaft

005945069
23063: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-01-162-0219
Linear Actuating Cylinder Assembly

011620219
D-WK-563-21: RNCC: 3 | RNVC: 2
D-WK-563-21: RNCC: 3 | RNVC: 9

13 Sep 1983

3040-01-161-4532
Push-Pull Control Assembly

011614532
D038012-003-0096: RNCC: 3 | RNVC: 2
D038012-003-0096: RNCC: 5 | RNVC: 9

6 Sep 1983

3040-00-604-9324
Shouldered Shaft

006049324
298854PC3: RNCC: 3 | RNVC: 2
324132PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-01-155-4814
Straight Shaft

011554814
348250-1: RNCC: 3 | RNVC: 2

9 Jun 1983

3040-01-163-1831
Shaft Retaining Plate

011631831
462741: RNCC: 3 | RNVC: 9

28 Sep 1983

3040-01-155-9079
Counterbalance Weight

011559079
34026111-004: RNCC: 3 | RNVC: 2

16 Jun 1983

3040-01-156-9865
Linear Actuating Cylinder Assembly

011569865
12190: RNCC: 3 | RNVC: 9

28 Jun 1983

3040-01-157-8717
Counterbalance Weight

011578717
B492265: RNCC: 3 | RNVC: 2

13 Jul 1983

3040-01-155-5777
Shaft Collar

011555777
3V2582: RNCC: 3 | RNVC: 2

11 Jun 1983

3040-01-157-8718
Counterbalance Weight

011578718
B492266: RNCC: 3 | RNVC: 2

13 Jul 1983

3040-01-157-5044
Rigid Connecting Link

011575044
K653060-231: RNCC: 3 | RNVC: 2
3040PL0136937: RNCC: 6 | RNVC: 9

6 Jul 1983

3040-01-155-9129
Counterbalance Weight

011559129
34026396-134: RNCC: 3 | RNVC: 2
34026396-134: RNCC: 5 | RNVC: 9

16 Jun 1983

3040-01-156-4012
Counterbalance Weight

011564012
34026395-106: RNCC: 3 | RNVC: 2
34026395-106: RNCC: 5 | RNVC: 9

20 Jun 1983

3040-01-156-9400
Remote Control Lever

011569400
74A831183-2007: RNCC: 3 | RNVC: 2

27 Jun 1983

3040-01-283-2039
Linear Actuating Cylinder Assembly

30 Jul 1988

3040-01-331-1798
Linear Actuating Cylinder Assembly

14 Dec 1990

3040-01-170-2470
Linear Actuating Cylinder Assembly Parts Kit

22 Jan 1984

3040-01-526-4837
Shouldered Shaft

20 Dec 2004

3040-01-525-7067
Oil Distribution Box Shaft Assembly

20 Nov 2004

3040-01-611-7468
Rigid Connecting Link

24 Sep 2012

3040-01-648-4707
Rotary Actuating Cylinder Assembly

016484707
12446353-1: RNCC: 3 | RNVC: 2
12446353: RNCC: D | RNVC: 9

25 Sep 2015

3040-00-618-7778
Friction Lining

006187778
2XE370B: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-620-7398
Governor Shaft

006207398
44B3521-473A: RNCC: 3 | RNVC: 2

17 Dec 1965

3040-00-613-5474
Shaft Collar

006135474
13216E6134: RNCC: 3 | RNVC: 2

8 Feb 1975

3040-00-614-4633
Shaft Collar

006144633
7042702P1: RNCC: 3 | RNVC: 2
7042702P001: RNCC: 5 | RNVC: 2
7042702: RNCC: D | RNVC: 9

1 Jan 1963

3040-00-617-3666
Housing Adapter

006173666
6173666: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-610-5393
Pivot

006105393
1608784: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-618-0181
Straight Shaft

006180181
3073: RNCC: 3 | RNVC: 2

29 Oct 1969

3040-00-614-0952
Rigid Connecting Link

006140952
26-5120: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-620-2411
Spur Gearshaft

006202411
SP304168: RNCC: 3 | RNVC: 2

28 Jun 1971

3040-00-618-1360
Shaft Collar

006181360
538990: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-01-682-0270
Linear Actuating Cylinder

17 Jul 2019

3040-01-575-0235
Housing Adapter

17 Jun 2009

3040-01-209-0962
Rigid Connecting Link

012090962
73893: RNCC: 3 | RNVC: 9

23 May 1985

3040-01-208-2816
Straight Shaft

012082816
6640-10PIECE2371: RNCC: 3 | RNVC: 9
6640-10PIECE237: RNCC: C | RNVC: 1

11 May 1985

3040-01-208-7044
Straight Shaft

012087044
6480-45PIECE2408: RNCC: 3 | RNVC: 9

17 May 1985

3040-01-210-5742
Linear Actuating Cylinder Piston Rod

012105742
0240315-10: RNCC: 3 | RNVC: 9
0240315-10: RNCC: C | RNVC: 1

14 Jun 1985

3040-01-208-2814
Straight Shaft

012082814
D17574PIECE1826: RNCC: 3 | RNVC: 9

11 May 1985

3040-01-208-2819
Straight Shaft

012082819
C17604PIECE1705: RNCC: 3 | RNVC: 9

11 May 1985

3040-01-208-2817
Straight Shaft

012082817
6640-10PIECE2373: RNCC: 3 | RNVC: 9

11 May 1985

3040-01-208-7204
Ball Joint

012087204
76774-30X3 PIECE 6: RNCC: 3 | RNVC: 2
SSBN640-300-2119310 PIECE 6: RNCC: 5 | RNVC: 2
SSBN640-300-2119310: RNCC: D | RNVC: 9
76774-30X3: RNCC: D | RNVC: 9

17 May 1985

3040-01-208-2795
Push-Pull Control Assembly

012082795
23653-72181: RNCC: 3 | RNVC: 2

11 May 1985

3040-01-209-6685
Shouldered Shaft

012096685
3862451-1: RNCC: 3 | RNVC: 2

4 Jun 1985

3040-01-211-0971
Shouldered Shaft

012110971
0104953: RNCC: 3 | RNVC: 9
0093537: RNCC: 5 | RNVC: 9

21 Jun 1985

3040-01-210-0298
Linear Actuating Cylinder Assembly

012100298
STYBBSRSA 38.750 STROKE: RNCC: 3 | RNVC: 9

6 Jun 1985

3040-01-208-9935
Shouldered Shaft

012089935
3601544-2: RNCC: 3 | RNVC: 2

21 May 1985

3040-01-210-0538
Clutch

012100538
HD-238: RNCC: 3 | RNVC: 2

6 Jun 1985

3040-01-211-0918
Shouldered Shaft

012110918
J202: RNCC: 3 | RNVC: 2
11129: RNCC: 5 | RNVC: 2

21 Jun 1985

3040-01-210-8064
Counterbalance Weight

012108064
02-017547-001: RNCC: 3 | RNVC: 2

18 Jun 1985

3040-01-207-9301
Rigid Connecting Link

012079301
L6410053-017: RNCC: 3 | RNVC: 2

7 May 1985

3040-01-208-2861
Spur Gearshaft

012082861
NF203658-1: RNCC: 3 | RNVC: 9

11 May 1985

3040-01-210-6928
Shaft Collar

012106928
S532AEX2: RNCC: 3 | RNVC: 2
S532AEX2: RNCC: 5 | RNVC: 9
SF-10455 PIECE 8: RNCC: 5 | RNVC: 9
SF-10455: RNCC: D | RNVC: 9

15 Jun 1985

3040-01-523-3986
Rotary Actuating Cylinder Assembly

015233986
8M0063382: RNCC: 3 | RNVC: 2
866-200A01: RNCC: 5 | RNVC: 9
806034A1: RNCC: 5 | RNVC: 9

1 Sep 2004

3040-01-575-9333
Nonaircraft Mechanical Actuator

17 Jul 2009

3040-00-203-2001
Ball Joint

002032001
316: RNCC: 3 | RNVC: 2
316: RNCC: 3 | RNVC: 9
316: RNCC: 5 | RNVC: 2
AN316: RNCC: 5 | RNVC: 2
AN316: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-205-1731
Shouldered Shaft Assembly

002051731
139C7778: RNCC: 3 | RNVC: 2

8 Apr 1973

3040-00-202-1801
Shaft Collar

002021801
15017N: RNCC: 3 | RNVC: 2

28 Mar 1973

3040-00-204-9582
Body Hub

002049582
K2-36: RNCC: 3 | RNVC: 2
X2405C1: RNCC: 5 | RNVC: 9
DK236: RNCC: 5 | RNVC: 9
CH2-36: RNCC: 5 | RNVC: 9

15 Apr 1973

3040-00-203-1452
Shaft Collar

002031452
403A5305: RNCC: 3 | RNVC: 2
403A5305: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-195-7474
Nonrotating Shaft Eye Bracket

001957474
315131: RNCC: 3 | RNVC: 2
315131: RNCC: 5 | RNVC: 9

10 Jun 1970

3040-00-198-4333
Worm Shaft

001984333
1596611P1: RNCC: 3 | RNVC: 2

18 Mar 1973

Load More Results