What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 167 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 167 of 300

3040-01-606-5051
Linear Actuating Cylinder Assembly

016065051
711 0382: RNCC: 3 | RNVC: 2

18 May 2012

3040-01-606-4519
Nonaircraft Mechanical Actuator

016064519
1315-A04H800: RNCC: 3 | RNVC: 2
1315-A04H1800: RNCC: 5 | RNVC: 9

18 May 2012

3040-01-606-3446
Rigid Connecting Link

016063446
5158T65P01: RNCC: 3 | RNVC: 2
5158T65: RNCC: D | RNVC: 9

16 May 2012

3040-01-606-3407
Rigid Connecting Link

016063407
2ABV12022: RNCC: 3 | RNVC: 2
2ABV12022: RNCC: 3 | RNVC: 9

16 May 2012

3040-01-606-3380
Straight Shaft

016063380
13494774: RNCC: 3 | RNVC: 2
13494761: RNCC: D | RNVC: 9

16 May 2012

3040-01-606-3268
Shouldered Shaft

016063268
167-6405730 FIND 1: RNCC: 3 | RNVC: 2
DF1500-250#1: RNCC: 5 | RNVC: 2

16 May 2012

3040-01-606-3271
Shaft Collar

016063271
167-6405730 FIND 2: RNCC: 3 | RNVC: 2
DF1500-250#2: RNCC: 5 | RNVC: 2

16 May 2012

3040-01-606-3156
Shouldered Shaft

016063156
1001929: RNCC: 3 | RNVC: 2

16 May 2012

3040-01-606-3136
Shouldered Shaft

016063136
08640304: RNCC: 3 | RNVC: 9
QS-11126 REV - ITEM NO 8: RNCC: 5 | RNVC: 9

16 May 2012

3040-01-606-3077
Housing Adapter

016063077
687723: RNCC: 3 | RNVC: 2

16 May 2012

3040-01-606-1762
Pivot Shaft Assembly

016061762
LS1082132: RNCC: 3 | RNVC: 2

10 May 2012

3040-01-606-1765
Mechanical Drive Housing Part

016061765
50011294: RNCC: 3 | RNVC: 2
50011294: RNCC: 5 | RNVC: 2

10 May 2012

3040-01-606-1579
Multiple Disk Brake

016061579
1-087-082-00-HQF: RNCC: 3 | RNVC: 2

9 May 2012

3040-01-606-1262
Breather

016061262
MBS-10-N04: RNCC: 3 | RNVC: 2

8 May 2012

3040-01-606-1084
Straight Shaft Assembly

016061084
W8006644: RNCC: 3 | RNVC: 2

8 May 2012

3040-01-606-0871
Straight Shaft

016060871
06432786: RNCC: 3 | RNVC: 2
06432786: RNCC: 5 | RNVC: 2

7 May 2012

3040-01-606-0253
Counterbalance Weight

016060253
PWA8180-29: RNCC: 3 | RNVC: 2
PWA8180: RNCC: D | RNVC: 9

3 May 2012

3040-01-605-9893
Nonaircraft Mechanical Actuator

016059893
981451: RNCC: 3 | RNVC: 2

2 May 2012

3040-01-605-8949
Shouldered Shaft

016058949
130-1-004: RNCC: 3 | RNVC: 2

30 Apr 2012

3040-01-605-8485
Shouldered Shaft

016058485
859105A 1: RNCC: 3 | RNVC: 2

26 Apr 2012

3040-01-605-8392
Bell Crank

016058392
17931-ZY3-000: RNCC: 3 | RNVC: 9

26 Apr 2012

3040-01-605-8220
Shouldered Shaft

016058220
06433693: RNCC: 3 | RNVC: 2
06433693: RNCC: 5 | RNVC: 2

26 Apr 2012

3040-01-605-8128
Brake Disc

016058128
39190: RNCC: 3 | RNVC: 2

25 Apr 2012

3040-01-605-7269
Mechanical Drive Housing

016057269
LS1038511: RNCC: 3 | RNVC: 2

23 Apr 2012

3040-01-605-7087
Control Cam

016057087
845-7285216 ITEM 56: RNCC: 3 | RNVC: 2
2643-751-01 ITEM 56: RNCC: 5 | RNVC: 2

23 Apr 2012

3040-01-605-7080
Straight Shaft

016057080
076-92593B: RNCC: 3 | RNVC: 2
S9514-C8-MMA-010 F&I NO 7-12-6: RNCC: 5 | RNVC: 2

23 Apr 2012

3040-01-605-7081
Straight Shaft

016057081
076-92594B: RNCC: 3 | RNVC: 2
S9514-C8-MMA-010 F&I NO 7-12-14: RNCC: 5 | RNVC: 2

23 Apr 2012

3040-01-605-6996
Bell Crank

016056996
H553-1502-58TVD: RNCC: 3 | RNVC: 1
754-7066812-58TVD: RNCC: 3 | RNVC: 2

23 Apr 2012

3040-01-605-6965
Spec Shaft Assembly

016056965
3533025: RNCC: 3 | RNVC: 2

23 Apr 2012

3040-01-605-6778
Shaft Collar

016056778
A84273: RNCC: 3 | RNVC: 2
A91886: RNCC: 3 | RNVC: 2

23 Apr 2012

3040-01-605-6660
Grease Cap

016056660
752-7068433-526: RNCC: 3 | RNVC: 2
H832-0399-526: RNCC: 5 | RNVC: 2

23 Apr 2012

3040-01-605-6545
Rigid Connecting Link

016056545
895742: RNCC: 3 | RNVC: 2

23 Apr 2012

3040-01-605-6539
Pawl

016056539
898354: RNCC: 3 | RNVC: 2

23 Apr 2012

3040-01-605-6318
Ball Joint

016056318
019364: RNCC: 3 | RNVC: 2

23 Apr 2012

3040-01-605-6317
Straight Shaft

016056317
120-7551533-3: RNCC: 3 | RNVC: 2
B553-9260-3: RNCC: 5 | RNVC: 2

23 Apr 2012

3040-01-605-6316
Shouldered Shaft

016056316
167-7066805-315: RNCC: 3 | RNVC: 2
H547-2003-315: RNCC: 5 | RNVC: 2

23 Apr 2012

3040-01-605-6320
Straight Shaft Assembly

016056320
8214490-155: RNCC: 3 | RNVC: 2

23 Apr 2012

3040-01-605-6257
Shouldered Shaft

016056257
08002244: RNCC: 3 | RNVC: 2
PL08002167 REV L FIND# 32: RNCC: 5 | RNVC: 2

23 Apr 2012

3040-01-605-6213
Shouldered Shaft

016056213
KF0032: RNCC: 3 | RNVC: 2
FORM 8816 PG 2 ITEM NO.25: RNCC: 5 | RNVC: 2

23 Apr 2012

3040-01-605-6224
Straight Shaft

016056224
00-916334: RNCC: 3 | RNVC: 2
PL-57685 IT 16: RNCC: 5 | RNVC: 2

23 Apr 2012

3040-01-605-6222
Rigid Connecting Link

016056222
17845-ZY6-000: RNCC: 3 | RNVC: 9

23 Apr 2012

3040-01-605-6209
Worm Shaft

016056209
KF1232: RNCC: 3 | RNVC: 2
FORM 8816 PG 1 ITEM NO.20: RNCC: 5 | RNVC: 2

23 Apr 2012

3040-01-605-6198
Shouldered Shaft

016056198
41161-ZY3-B00: RNCC: 3 | RNVC: 9

23 Apr 2012

3040-01-605-6116
Straight Shaft

016056116
200520700: RNCC: 3 | RNVC: 2
200520700: RNCC: 3 | RNVC: 2

23 Apr 2012

3040-01-605-6115
Straight Shaft

016056115
200520701: RNCC: 3 | RNVC: 2
200520701: RNCC: 3 | RNVC: 2

23 Apr 2012

3040-01-605-6084
Straight Shaft

016056084
752-7068433-524: RNCC: 3 | RNVC: 2
H832-0399-524: RNCC: 5 | RNVC: 2

23 Apr 2012

3040-01-605-6045
Straight Shaft

016056045
200520838: RNCC: 3 | RNVC: 2
200520838: RNCC: 3 | RNVC: 2

23 Apr 2012

3040-01-605-5489
Shoe Brake Parts Kit

016055489
5-96-0602-10: RNCC: 3 | RNVC: 2

20 Apr 2012

3040-01-605-5465
Control Cam Assembly

016055465
CA110: RNCC: 3 | RNVC: 2
B21428 ITEM #9: RNCC: 5 | RNVC: 2

20 Apr 2012

3040-01-605-4983
Linear Actuating Cylinder Assembly

016054983
076-84441C: RNCC: 3 | RNVC: 2
S9514-C8-MMA-010 F&I NO 7-12-11: RNCC: 5 | RNVC: 2

19 Apr 2012

3040-01-605-4963
Body Hub

016054963
68514424687: RNCC: 3 | RNVC: 2

19 Apr 2012

3040-01-605-4720
Nonaircraft Mechanical Actuator

016054720
167-7551538-A1: RNCC: 3 | RNVC: 2
B541-9192-A1: RNCC: 5 | RNVC: 2

19 Apr 2012

3040-01-605-4719
Linear Actuating Cylinder Head

016054719
167-7384496-A3: RNCC: 3 | RNVC: 2
B541-9175-A3: RNCC: 5 | RNVC: 2

19 Apr 2012

3040-01-605-4700
Linear Actuating Cylinder Assembly Parts Kit

016054700
0022-63-LCS-RK: RNCC: 3 | RNVC: 2

19 Apr 2012

3040-01-605-4690
Linear Actuating Cylinder Head

016054690
167-7384496-A4: RNCC: 3 | RNVC: 2
B541-9175-A4: RNCC: 5 | RNVC: 2

19 Apr 2012

3040-01-605-4680
Linear Actuating Cylinder Piston

016054680
167-7384496-A5: RNCC: 3 | RNVC: 2
B541-9175-A5: RNCC: 5 | RNVC: 2

19 Apr 2012

3040-01-605-4686
Piston Rod Guide

016054686
167-7384496-28: RNCC: 3 | RNVC: 2
B541-9175-28: RNCC: 5 | RNVC: 1

19 Apr 2012

3040-01-605-4682
Linear Actuating Cylinder Piston

016054682
167-7384496-4: RNCC: 3 | RNVC: 2
B541-9175-4: RNCC: 5 | RNVC: 2

19 Apr 2012

3040-01-605-4681
Linear Actuating Cylinder Piston Rod

016054681
167-7384496-5: RNCC: 3 | RNVC: 2
B541-9175-5: RNCC: 5 | RNVC: 2

19 Apr 2012

3040-01-605-4625
Special Bracket

016054625
1449100000: RNCC: 3 | RNVC: 2

19 Apr 2012

3040-01-605-4521
Pilot Handle

016054521
7005412-6: RNCC: 3 | RNVC: 2

19 Apr 2012

3040-01-605-4218
Housing Adapter

016054218
6I-3907: RNCC: 3 | RNVC: 2

19 Apr 2012

3040-01-605-4172
Auto Lubricator

016054172
A1119: RNCC: 3 | RNVC: 9
130-0-001 REV F ITEM NO.20: RNCC: 5 | RNVC: 2

19 Apr 2012

3040-01-605-4122
Linear Actuating Cylinder Head

016054122
61A-016350-001: RNCC: 3 | RNVC: 2

19 Apr 2012

3040-01-605-3951
Nonaircraft Mechanical Actuator

016053951
167-7384496-A1: RNCC: 3 | RNVC: 2
B541-9175-A1: RNCC: 5 | RNVC: 2

19 Apr 2012

3040-01-605-3910
Pneumatic Control Assembly

016053910
H525-7624-51: RNCC: 3 | RNVC: 1
501-7383597-51: RNCC: 5 | RNVC: 2

19 Apr 2012

3040-01-605-3674
Shouldered Shaft

016053674
200713161: RNCC: 3 | RNVC: 2
200713161: RNCC: 3 | RNVC: 2

19 Apr 2012

3040-01-605-3516
Actuator Rotar

016053516
751-7072502-22: RNCC: 3 | RNVC: 2
7072500-1NB: RNCC: 3 | RNVC: 2
H821-0502-22: RNCC: 3 | RNVC: 2

18 Apr 2012

3040-01-605-3478
Hydraulic Control Assembly

016053478
660742: RNCC: 3 | RNVC: 2

18 Apr 2012

3040-01-605-3446
Shaft Collar

016053446
41202-ZY3-000: RNCC: 3 | RNVC: 9

18 Apr 2012

3040-01-605-2867
Hub Clamp

016052867
815504244: RNCC: 3 | RNVC: 2

18 Apr 2012

3040-01-605-1962
Linear Actuating Cylinder Assembly

016051962
PLMB1007: RNCC: 3 | RNVC: 2

16 Apr 2012

3040-01-605-1916
Multiple Gears Gearshaft

016051916
3207202011: RNCC: 3 | RNVC: 2

16 Apr 2012

3040-01-605-1889
Shouldered Shaft

016051889
24310-ZY3-C00: RNCC: 3 | RNVC: 9

16 Apr 2012

3040-01-605-1737
Control Cam

016051737
320742-1: RNCC: 3 | RNVC: 2
360077-1/K PG.20, 5.4.5 LABEL F: RNCC: 5 | RNVC: 2

16 Apr 2012

3040-01-605-1734
Counterbalance Weight

016051734
6465014-3: RNCC: 3 | RNVC: 2

16 Apr 2012

3040-01-605-1728
Counterbalance Weight

016051728
6465014-4: RNCC: 3 | RNVC: 2
6465014-4: RNCC: 5 | RNVC: 9

16 Apr 2012

3040-01-605-1702
Shouldered Shaft

016051702
3207304006: RNCC: 3 | RNVC: 2

16 Apr 2012

3040-01-605-1193
Rigid Connecting Link

016051193
200520744: RNCC: 3 | RNVC: 2
200520744: RNCC: 3 | RNVC: 2

16 Apr 2012

3040-01-605-1004
Straight Shaft

016051004
21371-004: RNCC: 3 | RNVC: 2

16 Apr 2012

3040-01-605-1008
Shouldered Shaft

016051008
7360-016: RNCC: 3 | RNVC: 2
26KP527: RNCC: 5 | RNVC: 2
26KP527: RNCC: 5 | RNVC: 9

16 Apr 2012

3040-01-605-0973
Special Pinion Gear

016050973
3207302058: RNCC: 3 | RNVC: 2

16 Apr 2012

3040-01-605-0969
Spur Gearshaft

016050969
24620-ZY3-000: RNCC: 3 | RNVC: 9

16 Apr 2012

3040-01-605-0949
Spur Gearshaft

016050949
24610-ZY3-A00: RNCC: 3 | RNVC: 9

16 Apr 2012

3040-01-605-0690
Linear Actuating Cylinder Piston Rod

016050690
56120-ZY9-003: RNCC: 3 | RNVC: 9

16 Apr 2012

3040-01-605-0295
Linear Actuating Cylinder Piston

016050295
411566P: RNCC: 3 | RNVC: 2
26KP744: RNCC: 5 | RNVC: 2
26KP744: RNCC: 5 | RNVC: 9

16 Apr 2012

3040-01-605-0294
Linear Actuating Cylinder Piston

016050294
411570P: RNCC: 3 | RNVC: 2
26KP746: RNCC: 5 | RNVC: 2
26KP746: RNCC: 5 | RNVC: 9

16 Apr 2012

3040-01-605-0291
Linear Actuating Cylinder Piston

016050291
411569P: RNCC: 3 | RNVC: 2
26KP745: RNCC: 5 | RNVC: 2
26KP745: RNCC: 5 | RNVC: 9

16 Apr 2012

3040-01-605-0290
Linear Actuating Cylinder Piston

016050290
411564P: RNCC: 3 | RNVC: 2

16 Apr 2012

3040-01-605-0263
Layshaft And Bellhousing

016050263
3207203005: RNCC: 3 | RNVC: 2

16 Apr 2012

3040-01-604-8671
Mechanical Drive Housing

016048671
895305T01: RNCC: 3 | RNVC: 2

13 Apr 2012

3040-01-604-7777
Worm Shaft

016047777
287 5269-001: RNCC: 3 | RNVC: 2

13 Apr 2012

3040-01-604-7333
Mechanical Drive Housing

016047333
04959A01-01: RNCC: 3 | RNVC: 2
04959A01-01: RNCC: 3 | RNVC: 2

12 Apr 2012

3040-01-604-7093
Mechanical Drive Housing

016047093
S327375: RNCC: 3 | RNVC: 2
327375: RNCC: 5 | RNVC: 9

12 Apr 2012

3040-01-604-6781
Lever Fitting

016046781
52504.301934: RNCC: 3 | RNVC: 2
PSK2ASBC-20.1-00-S 3134 POS:025: RNCC: 5 | RNVC: 2

11 Apr 2012

3040-01-604-6775
Planetary Gears Carrier

016046775
435H3.000C00: RNCC: 3 | RNVC: 2
PSK2ASBC-20.1-00-S 3134 POS:035: RNCC: 5 | RNVC: 2

11 Apr 2012

3040-01-604-6774
Planetary Gears Carrier

016046774
536I3.0C0934: RNCC: 3 | RNVC: 2
PSK2ASBC-20.1-00-S 3134 POS:036: RNCC: 5 | RNVC: 2

11 Apr 2012

3040-01-604-6665
Linear Actuating Cylinder Assembly

016046665
AA1-25X250-3-1-4M-2SP: RNCC: 3 | RNVC: 2

11 Apr 2012

3040-01-604-6649
Nonaircraft Mechanical Actuator

016046649
38920: RNCC: 3 | RNVC: 2
38920: RNCC: 5 | RNVC: 9

11 Apr 2012

3040-01-604-6646
Nonaircraft Mechanical Actuator

016046646
38921: RNCC: 3 | RNVC: 2
38921: RNCC: 5 | RNVC: 9

11 Apr 2012

3040-01-604-6609
End Cap Assy

016046609
8M0021648: RNCC: 3 | RNVC: 2
878243A1: RNCC: 3 | RNVC: 9
1100-8M0021648: RNCC: 5 | RNVC: 1

11 Apr 2012

3040-01-604-6298
Straight Shaft

016046298
200713215: RNCC: 3 | RNVC: 2
200713215: RNCC: 7 | RNVC: 2

10 Apr 2012

3040-01-604-5838
Bell Crank

016045838
895737: RNCC: 3 | RNVC: 2

9 Apr 2012

3040-01-604-5710
Control Cam

016045710
6P3-44150-00-00: RNCC: 3 | RNVC: 2

9 Apr 2012

3040-01-604-5164
Lever Assy

016045164
850166T06: RNCC: 3 | RNVC: 2

6 Apr 2012

3040-01-604-5011
Control Cam Assembly

016045011
6P2-44150-00-00: RNCC: 3 | RNVC: 2

6 Apr 2012

3040-01-604-4538
Linear Actuating Cylinder

016044538
61A-43813-01-00: RNCC: 3 | RNVC: 2

5 Apr 2012

3040-01-604-4529
Helical Gear And Shaft Assembly

016044529
10666579-011: RNCC: 3 | RNVC: 2
10666579: RNCC: D | RNVC: 9

5 Apr 2012

3040-01-604-4520
Linear Actuating Cylinder Piston Rod

016044520
69J-43801-00-00: RNCC: 3 | RNVC: 2

5 Apr 2012

3040-01-604-4516
Remote Control Lever

016044516
69J-81839-00-00: RNCC: 3 | RNVC: 2

5 Apr 2012

3040-01-604-4490
Linear Actuating Cylinder Piston

016044490
6H1-43814-11-00: RNCC: 3 | RNVC: 2
6H1-43814-00-00: RNCC: 5 | RNVC: 9

5 Apr 2012

3040-01-604-4455
Rigid Connecting Link

016044455
883006A1: RNCC: 3 | RNVC: 2

5 Apr 2012

3040-01-604-4096
Linear Actuating Cylinder Assembly

016044096
893505T05: RNCC: 3 | RNVC: 2

4 Apr 2012

3040-01-604-4036
Remote Control Lever

016044036
853906A 1: RNCC: 3 | RNVC: 2

4 Apr 2012

3040-01-604-3915
Remote Control Lever

016043915
893777: RNCC: 3 | RNVC: 2
850162: RNCC: 5 | RNVC: 9

4 Apr 2012

3040-01-604-3882
Piston Ring

016043882
845-7504734-01-X-31: RNCC: 3 | RNVC: 1

4 Apr 2012

3040-01-604-3819
Shouldered Shaft

016043819
2040384-1: RNCC: 3 | RNVC: 2
2040384-1: RNCC: 5 | RNVC: 9

4 Apr 2012

3040-01-604-3348
Mechanical Drive Housing

016043348
531801-4: RNCC: 3 | RNVC: 2
531801-4: RNCC: 5 | RNVC: 9

3 Apr 2012

3040-01-604-3254
Shaft Retaining Plate

016043254
20-9154-01: RNCC: 3 | RNVC: 2

3 Apr 2012

3040-01-604-2741
Remote Control Lever

016042741
825957 1: RNCC: 3 | RNVC: 2

2 Apr 2012

3040-01-604-2745
Rigid Connecting Link

016042745
893775A01: RNCC: 3 | RNVC: 2

2 Apr 2012

3040-01-604-2683
Remote Control Lever

016042683
822682A 4: RNCC: 3 | RNVC: 2
822682A 4: RNCC: 5 | RNVC: 2

2 Apr 2012

3040-01-604-2642
Shaft Collar

016042642
68V-14265-00-00: RNCC: 3 | RNVC: 2

2 Apr 2012

3040-01-604-2310
Manual Control Lever

016042310
06532-ZY3-U00: RNCC: 3 | RNVC: 9

30 Mar 2012

3040-01-604-2117
Piston Rod Guide

016042117
56115-ZY9-003: RNCC: 3 | RNVC: 9

30 Mar 2012

3040-01-604-2244
Co-Pilot Puck

016042244
822397: RNCC: 3 | RNVC: 2

30 Mar 2012

3040-01-604-1611
Straight Shaft

016041611
060000-045: RNCC: 3 | RNVC: 2

28 Mar 2012

3040-01-604-1612
Straight Shaft

016041612
138522-001: RNCC: 3 | RNVC: 2

28 Mar 2012

3040-01-604-1608
Straight Shaft

016041608
124407: RNCC: 3 | RNVC: 2

28 Mar 2012

3040-01-604-1365
Linear Actuating Cylinder Head

016041365
61A-43811-00-00: RNCC: 3 | RNVC: 2

27 Mar 2012

3040-01-604-1319
Rigid Connecting Link

016041319
563-8217028-14: RNCC: 3 | RNVC: 2
563-8217028-17: RNCC: 5 | RNVC: 1
563-8356628-PS-2: RNCC: 5 | RNVC: 1
H5520505PSA-2: RNCC: 5 | RNVC: 2
H552-0505PS-PS2: RNCC: 5 | RNVC: 2

27 Mar 2012

3040-01-604-1258
Linear Actuating Cylinder Head

016041258
13211E3022: RNCC: 3 | RNVC: 2

27 Mar 2012

3040-01-604-0784
Brake Nrp

016040784
0022-601-47-000400: RNCC: 3 | RNVC: 2
130-0-007 REV A ITEM NO.2: RNCC: 5 | RNVC: 2
130-0-003: RNCC: 5 | RNVC: 2
130-0-001 REV F ITEM NO.2: RNCC: 5 | RNVC: 2

26 Mar 2012

3040-01-604-0783
Coupling Nrp

016040783
L035-0.375X0.375-NBR: RNCC: 3 | RNVC: 2
130-0-001 REV A ITEM NO.4: RNCC: 5 | RNVC: 2
130-0-006: RNCC: 5 | RNVC: 2

26 Mar 2012

3040-01-604-0651
Linear Actuating Cylinder Head

016040651
13211E3027: RNCC: 3 | RNVC: 2

26 Mar 2012

3040-01-604-0644
Linear Actuating Cylinder Cap

016040644
13211E3013: RNCC: 3 | RNVC: 2

26 Mar 2012

3040-01-604-0591
Straight Shaft

016040591
C-91726: RNCC: 3 | RNVC: 2

26 Mar 2012

3040-01-604-0483
Breather

016040483
ELFP30F3W1.0: RNCC: 3 | RNVC: 2
ELFP30F3W1.0: RNCC: 5 | RNVC: 2

26 Mar 2012

3040-01-603-9402
Duplex Strainer Nrp

016039402
0203SAS60801621: RNCC: 3 | RNVC: 2
0203SA-2-621 PN 0203SAS60801621: RNCC: 5 | RNVC: 2

22 Mar 2012

3040-01-603-9317
Shouldered Shaft

016039317
000-50061-0001: RNCC: 3 | RNVC: 2

22 Mar 2012

3040-01-603-9256
Control Cam

016039256
738032-16: RNCC: 3 | RNVC: 2
738032: RNCC: D | RNVC: 9

22 Mar 2012

3040-01-603-8753
Control Cam

016038753
20722-1080: RNCC: 3 | RNVC: 2
21849 FIND NO 29: RNCC: 5 | RNVC: 2
21849: RNCC: D | RNVC: 9

20 Mar 2012

3040-01-603-8615
Shouldered Shaft

016038615
563-8217028-1: RNCC: 3 | RNVC: 2
H552-0703-1: RNCC: 5 | RNVC: 2

19 Mar 2012

3040-01-603-8602
Rigid Connecting Link

016038602
21849-1014-1: RNCC: 3 | RNVC: 2

19 Mar 2012

3040-01-603-8452
Shouldered Shaft

016038452
563-8217028-2: RNCC: 3 | RNVC: 2
H552-0703-2: RNCC: 5 | RNVC: 2

19 Mar 2012

3040-01-603-8407
Inertia Damper

016038407
69J-13593-00-00: RNCC: 3 | RNVC: 2

19 Mar 2012

3040-01-603-8405
Shaft Collar

016038405
6P2-44139-00-00: RNCC: 3 | RNVC: 2

19 Mar 2012

3040-01-603-8053
Shouldered Shaft

016038053
563-8217028-3: RNCC: 3 | RNVC: 2
H552-0703-3: RNCC: 5 | RNVC: 2

16 Mar 2012

3040-01-603-7221
Shaft Collar

016037221
2527922: RNCC: 3 | RNVC: 2

13 Mar 2012

3040-01-603-7171
Shouldered Shaft

016037171
6Y4618: RNCC: 3 | RNVC: 2

12 Mar 2012

3040-01-603-6999
Piston Ring

016036999
A9060300224: RNCC: 3 | RNVC: 2

12 Mar 2012

3040-01-603-6635
Servoactuator

016036635
CA84726-001: RNCC: 3 | RNVC: 1
PL7517E65FIND15: RNCC: 5 | RNVC: 1
CA84726: RNCC: 5 | RNVC: 1

10 Mar 2012

3040-01-603-6632
Nonaircraft Mechanical Actuator

016036632
7517E65-001: RNCC: 3 | RNVC: 1

10 Mar 2012

3040-01-603-5440
Counterbalance Weight

016035440
1808994: RNCC: 3 | RNVC: 2

6 Mar 2012

3040-01-603-5074
Electrical-Fluid Pressure Connector Assembly

016035074
H407556-2: RNCC: 3 | RNVC: 2

5 Mar 2012

3040-01-603-5069
Electrical-Fluid Pressure Connector Assembly

016035069
H407556-1: RNCC: 3 | RNVC: 2
H407556-1: RNCC: 3 | RNVC: 2

5 Mar 2012

3040-01-603-4531
Manual Control Lever

016034531
803-5001003-X9X1-161: RNCC: 3 | RNVC: 2

2 Mar 2012

3040-01-603-4449
Rotating Shaft Eye Bracket

016034449
58301407: RNCC: 3 | RNVC: 2

2 Mar 2012

3040-01-603-4443
Shouldered Shaft

016034443
66012022: RNCC: 3 | RNVC: 2

2 Mar 2012

3040-01-603-4437
Shouldered Shaft

016034437
66012024: RNCC: 3 | RNVC: 2

2 Mar 2012

3040-01-603-3540
Shouldered Shaft Assembly

016033540
21618-005: RNCC: 3 | RNVC: 2
26KP562: RNCC: 5 | RNVC: 2
26KP562: RNCC: 5 | RNVC: 9

1 Mar 2012

3040-01-603-2729
Rigid Connecting Link

016032729
161A6300-1: RNCC: 3 | RNVC: 2

27 Feb 2012

3040-01-603-2696
Linear Actuating Cylinder Cap

016032696
7517E48: RNCC: 3 | RNVC: 1
7516E74FIND10: RNCC: 5 | RNVC: 1
7517E48-001: RNCC: D | RNVC: 9

27 Feb 2012

3040-01-603-2700
Nonaircraft Mechanical Actuator

016032700
7517E65: RNCC: 3 | RNVC: 1
7516E74FIND12: RNCC: 5 | RNVC: 1
7517E65-001: RNCC: D | RNVC: 9

27 Feb 2012

3040-01-603-2281
Rigid Connecting Link

016032281
H552-0703-A16: RNCC: 3 | RNVC: 2
563-8217012-17: RNCC: 5 | RNVC: 1

24 Feb 2012

3040-01-603-2282
Rigid Connecting Link

016032282
H552-0603A38: RNCC: 3 | RNVC: 2
H552-0701-16: RNCC: 5 | RNVC: 1

24 Feb 2012

3040-01-603-2280
Linkage Crank

016032280
563-8356628-PS-3: RNCC: 3 | RNVC: 2
H552-0703-15: RNCC: 5 | RNVC: 2

24 Feb 2012

3040-01-603-1982
Rigid Connecting Link

016031982
045254: RNCC: 3 | RNVC: 2
045254: RNCC: 5 | RNVC: 2

23 Feb 2012

3040-01-603-1816
Nonrotating Shaft Eye Bracket

016031816
530101-001: RNCC: 3 | RNVC: 2

23 Feb 2012

3040-01-603-1813
Nonrotating Shaft Eye Bracket

016031813
530102-001: RNCC: 3 | RNVC: 2

23 Feb 2012

3040-01-603-1719
Rigid Connecting Link

016031719
H552-0703-A11: RNCC: 3 | RNVC: 2
563-8217012-13: RNCC: 5 | RNVC: 1

23 Feb 2012

3040-01-603-1717
Rigid Connecting Link

016031717
563-8217012-10: RNCC: 3 | RNVC: 2
H552-0701-10: RNCC: 5 | RNVC: 1

23 Feb 2012

3040-01-603-1718
Rigid Connecting Link

016031718
H552-0703-A10: RNCC: 3 | RNVC: 2
563-8217012-12: RNCC: 5 | RNVC: 1

23 Feb 2012

3040-01-603-1715
Shouldered Shaft

016031715
752-7068433-502: RNCC: 3 | RNVC: 2
H832-0399-502: RNCC: 5 | RNVC: 1

23 Feb 2012

3040-01-603-1553
Linear Actuating Cylinder Cap

016031553
511610P: RNCC: 3 | RNVC: 2
26KP756: RNCC: 5 | RNVC: 2
26KP756: RNCC: 5 | RNVC: 9

23 Feb 2012

3040-01-603-1551
Linear Actuating Cylinder Piston Rod

016031551
315144B: RNCC: 3 | RNVC: 2
26KP737: RNCC: 5 | RNVC: 2
26KP737: RNCC: 5 | RNVC: 9

23 Feb 2012

3040-01-603-1470
Shaft Assy

016031470
563-8217028-A1: RNCC: 3 | RNVC: 2
H552-0703-A1: RNCC: 5 | RNVC: 2

23 Feb 2012

3040-01-603-1459
Shaft Assy

016031459
H552-0703-A3: RNCC: 3 | RNVC: 2
H552-0701-8: RNCC: 5 | RNVC: 1

23 Feb 2012

3040-01-603-1458
Shaft Assy

016031458
H552-0703-A2: RNCC: 3 | RNVC: 2
563-8217012-7: RNCC: 5 | RNVC: 1

23 Feb 2012

3040-01-603-1450
Linear Actuating Cylinder Piston Rod

016031450
M3-044: RNCC: 3 | RNVC: 2

23 Feb 2012

3040-01-603-1386
Straight Shaft

016031386
045249: RNCC: 3 | RNVC: 2
045249: RNCC: 5 | RNVC: 2

23 Feb 2012

3040-01-603-1163
Rigid Connecting Link

016031163
563-8217028-A7: RNCC: 3 | RNVC: 2
H552-0703-A7: RNCC: 5 | RNVC: 2

23 Feb 2012

3040-01-603-1158
Rigid Connecting Link

016031158
563-8217028-A12: RNCC: 3 | RNVC: 2
H552-0703-A12: RNCC: 5 | RNVC: 2

23 Feb 2012

3040-01-603-0860
Linear Actuating Cylinder Piston Rod

016030860
302240B: RNCC: 3 | RNVC: 2
26KP732: RNCC: 5 | RNVC: 2
26KP732: RNCC: 5 | RNVC: 9

22 Feb 2012

3040-01-603-0641
Linear Actuating Cylinder Cap

016030641
511608P: RNCC: 3 | RNVC: 2
26KP755: RNCC: 5 | RNVC: 2
26KP755: RNCC: 5 | RNVC: 9

21 Feb 2012

3040-01-603-0604
Linear Actuating Cylinder Piston Rod

016030604
302243B: RNCC: 3 | RNVC: 2
26KP735: RNCC: 5 | RNVC: 2
26KP735: RNCC: 5 | RNVC: 9

21 Feb 2012

3040-01-603-0573
Linear Actuating Cylinder Cap

016030573
511606P: RNCC: 3 | RNVC: 2
26KP753: RNCC: 5 | RNVC: 2
26KP753: RNCC: 5 | RNVC: 9

21 Feb 2012

3040-01-603-0564
Linear Actuating Cylinder Cap

016030564
511607P: RNCC: 3 | RNVC: 2
26KP754: RNCC: 5 | RNVC: 2
26KP754: RNCC: 5 | RNVC: 9

21 Feb 2012

3040-01-603-0528
Linear Actuating Cylinder Cap

016030528
511611P: RNCC: 3 | RNVC: 2
26KP757: RNCC: 5 | RNVC: 2
26KP757: RNCC: 5 | RNVC: 9

21 Feb 2012

3040-01-603-0512
Linear Actuating Cylinder Piston Rod

016030512
302241B: RNCC: 3 | RNVC: 2
26KP733: RNCC: 5 | RNVC: 2
26KP733: RNCC: 5 | RNVC: 9

21 Feb 2012

3040-01-602-9892
Spec Hub Assembly

016029892
008-277-04: RNCC: 3 | RNVC: 9
DX008-277-04: RNCC: 5 | RNVC: 2

15 Feb 2012

3040-01-602-9604
Linear Actuating Cylinder Assembly

016029604
300096: RNCC: 3 | RNVC: 2

15 Feb 2012

3040-01-602-9373
Rigid Connecting Link

016029373
114A1420-3: RNCC: 3 | RNVC: 2

14 Feb 2012

3040-01-602-8760
Hub And Drum Assembly

016028760
DX008-277-70: RNCC: 3 | RNVC: 2
008-277-70: RNCC: 5 | RNVC: 2

10 Feb 2012

3040-01-602-7989
Shelf Shaft

016027989
176621-31: RNCC: 3 | RNVC: 2

7 Feb 2012

3040-01-602-8001
Roller Shaft

016028001
53818: RNCC: 3 | RNVC: 2
23KP947: RNCC: 5 | RNVC: 2
23KP947: RNCC: 5 | RNVC: 9

7 Feb 2012

3040-01-602-7937
Flexible Drive Shaft

016027937
0 158 130 800: RNCC: 3 | RNVC: 9
0 158 130 001: RNCC: 5 | RNVC: 2

7 Feb 2012

3040-01-602-7855
Pawl

016027855
74A831026-2013: RNCC: 3 | RNVC: 2

7 Feb 2012

3040-01-602-7270
Shaft Retaining Plate

016027270
12510302: RNCC: 3 | RNVC: 2
12510302: RNCC: 5 | RNVC: 2
12510302: RNCC: 5 | RNVC: 2

3 Feb 2012

3040-01-602-7132
Rigid Connecting Link

016027132
206351-1: RNCC: 3 | RNVC: 2
07N019-001ITEM12: RNCC: 5 | RNVC: 2

3 Feb 2012

3040-01-602-7075
Tricollar Level Assembly

016027075
BSM-2000-12A: RNCC: 3 | RNVC: 2

3 Feb 2012

3040-01-602-6929
Multiple Gears Gearshaft

016026929
71056073: RNCC: 3 | RNVC: 2
24KP215: RNCC: 5 | RNVC: 2
24KP215: RNCC: 5 | RNVC: 9
99904661: RNCC: D | RNVC: 9

3 Feb 2012

3040-01-602-6177
Cylinder Rod End

016026177
101 106 58: RNCC: 3 | RNVC: 2
FFP101 106 58: RNCC: 5 | RNVC: 2
10110658 2413485: RNCC: 5 | RNVC: 9
10110658 5413485: RNCC: 5 | RNVC: 9
10345820: RNCC: 6 | RNVC: 9

1 Feb 2012

3040-01-602-5905
Linear Actuating Cylinder Assembly Parts Kit

016025905
SKAH150011: RNCC: 3 | RNVC: 2

1 Feb 2012

3040-01-602-5870
Linear Actuating Cylinder Assembly Parts Kit

016025870
01278819: RNCC: 3 | RNVC: 2

1 Feb 2012

3040-01-602-5460
Body Hub

016025460
P-11917: RNCC: 3 | RNVC: 2

31 Jan 2012

3040-01-602-5377
Slip Gearshaft

016025377
42315-62: RNCC: 3 | RNVC: 9

31 Jan 2012

3040-01-602-5334
Brake Parts Kit

016025334
K71-133-00: RNCC: 3 | RNVC: 9
DXK71-133-00: RNCC: 5 | RNVC: 2

31 Jan 2012

3040-01-602-5176
Hydraulic Accumulator Cylinder

016025176
P4401-1864: RNCC: 3 | RNVC: 9

31 Jan 2012

3040-01-602-5125
Cam Disc

016025125
U000004224: RNCC: 3 | RNVC: 2
DAAK002143 SEQ 9: RNCC: 5 | RNVC: 9

31 Jan 2012

3040-01-602-4384
Wheel

016024384
167-7066792-165: RNCC: 3 | RNVC: 2
H547-1117-165: RNCC: 5 | RNVC: 2

31 Jan 2012

3040-01-602-4382
Wheel

016024382
167-7066792-164: RNCC: 3 | RNVC: 2
H547-1117-164: RNCC: 5 | RNVC: 2

31 Jan 2012

3040-01-602-3960
Brake Shoe

016023960
070BK139: RNCC: 3 | RNVC: 9

30 Jan 2012

3040-01-602-3896
Chamber Assembly Brake

016023896
1180784: RNCC: 3 | RNVC: 2

30 Jan 2012

3040-01-602-3332
Special Shaft

016023332
F134441: RNCC: 3 | RNVC: 2
F132853 ITEM NO. 17: RNCC: 5 | RNVC: 2

28 Jan 2012

3040-01-602-3329
Special Shaft

016023329
F130341: RNCC: 3 | RNVC: 2
F127463 REV A ITEM NO. 8: RNCC: 5 | RNVC: 2

28 Jan 2012

3040-01-602-3327
Special Shaft

016023327
F134301: RNCC: 3 | RNVC: 2
F127463 REV A ITEM NO. 36: RNCC: 5 | RNVC: 2

28 Jan 2012

3040-01-602-3326
Special Shaft

016023326
F134331: RNCC: 3 | RNVC: 2
F127463 REV A ITEM NO. 24: RNCC: 5 | RNVC: 2

28 Jan 2012

3040-01-602-3324
Special Shaft

016023324
F130331: RNCC: 3 | RNVC: 2
F127463 REV A ITEM NO. 10: RNCC: 5 | RNVC: 2

28 Jan 2012

3040-01-602-3255
Shouldered Shaft Assembly

016023255
PX-11916: RNCC: 3 | RNVC: 2

28 Jan 2012

3040-01-602-3256
Shouldered Shaft Assembly

016023256
KS1853: RNCC: 3 | RNVC: 2
PX-9732: RNCC: 5 | RNVC: 9

28 Jan 2012

3040-01-602-3078
Rotary Actuating Cylinder Assembly

016023078
PMC-22008: RNCC: 3 | RNVC: 2

28 Jan 2012

3040-01-602-3035
Special Shaft

016023035
21835-1007-1: RNCC: 3 | RNVC: 2
21852 FIND 8: RNCC: 5 | RNVC: 2

28 Jan 2012

3040-01-602-2774
Linear Actuating Cylinder

016022774
1083592: RNCC: 3 | RNVC: 2

28 Jan 2012

3040-01-602-2697
A Cylinder Assembly

016022697
BCDA-2.5: RNCC: 3 | RNVC: 2

28 Jan 2012

3040-01-602-1798
Housing Adapter

016021798
29530485: RNCC: 3 | RNVC: 2

27 Jan 2012

3040-01-602-1776
Housing Adapter

016021776
29430484: RNCC: 3 | RNVC: 2

27 Jan 2012

3040-01-602-0660
Straight Shaft

016020660
412 009 10: RNCC: 3 | RNVC: 2
FFP412 009 10: RNCC: 5 | RNVC: 2

26 Jan 2012

3040-01-602-0015
Shouldered Shaft

016020015
ADAPTER SHAFT: RNCC: 3 | RNVC: 2

26 Jan 2012

3040-01-601-9854
Shaft Collar

016019854
60767003-2: RNCC: 3 | RNVC: 2

26 Jan 2012

3040-01-601-9027
Control Cam

016019027
7662440: RNCC: 3 | RNVC: 2
05131510: RNCC: 5 | RNVC: 2

26 Jan 2012

3040-01-601-9023
Pawl

016019023
7662448: RNCC: 3 | RNVC: 2
06207530: RNCC: 5 | RNVC: 2

26 Jan 2012

3040-01-601-8816
Shaft Collar

016018816
SC-187: RNCC: 3 | RNVC: 9

26 Jan 2012

3040-01-601-8765
Straight Shaft

016018765
326582: RNCC: 3 | RNVC: 2

26 Jan 2012

3040-01-601-8403
Pawl

016018403
167-7066792-167: RNCC: 3 | RNVC: 2
H547-1117-167: RNCC: 5 | RNVC: 2

26 Jan 2012

3040-01-601-7055
Connector Assembly

016017055
20054-1: RNCC: 3 | RNVC: 2
H460540-1: RNCC: 7 | RNVC: 2

19 Jan 2012

3040-01-601-5960
Rigid Connecting Link

016015960
162A3105-1: RNCC: 3 | RNVC: 2

19 Jan 2012

3040-01-601-1055
Linear Actuating Cylinder Assembly

016011055
C16-28949: RNCC: 3 | RNVC: 2
C16-28949: RNCC: 3 | RNVC: 2
C16-28948: RNCC: 5 | RNVC: 9
10690700-001: RNCC: 7 | RNVC: 2

6 Jan 2012

3040-01-601-1049
Planetary Gears Carrier

016011049
10650787: RNCC: 3 | RNVC: 2

6 Jan 2012

3040-01-601-0997
Straight Shaft

016010997
12935: RNCC: 3 | RNVC: 2
3KK232: RNCC: 5 | RNVC: 2
3KK232: RNCC: 5 | RNVC: 9

5 Jan 2012

3040-01-601-0981
Shouldered Shaft

016010981
14351-000: RNCC: 3 | RNVC: 2
14351-000: RNCC: 5 | RNVC: 2
26KP556: RNCC: 5 | RNVC: 2
26KP556: RNCC: 5 | RNVC: 9

5 Jan 2012

3040-01-601-0972
Shouldered Shaft

016010972
13384: RNCC: 3 | RNVC: 2
26KP864: RNCC: 5 | RNVC: 2
26KP864: RNCC: 5 | RNVC: 9

5 Jan 2012

3040-01-601-0944
Shouldered Shaft

016010944
60131182: RNCC: 3 | RNVC: 2
24KP278: RNCC: 5 | RNVC: 2
24KP278: RNCC: 5 | RNVC: 9

5 Jan 2012

3040-01-601-0940
Straight Shaft

016010940
73744169: RNCC: 3 | RNVC: 2
26KP774: RNCC: 5 | RNVC: 2
26KP774: RNCC: 5 | RNVC: 9

5 Jan 2012

3040-01-601-0855
Straight Shaft

016010855
27KP405: RNCC: 3 | RNVC: 2
8893K961: RNCC: 5 | RNVC: 2
27KP405: RNCC: 5 | RNVC: 9

5 Jan 2012

3040-01-601-0693
Shaft Seal Assy Nrp

016010693
100-101-400: RNCC: 3 | RNVC: 2
100-101-400-GA: RNCC: 3 | RNVC: 2
100-101-401: RNCC: 3 | RNVC: 2

5 Jan 2012

3040-01-601-0670
Shaft Control Module

016010670
20706242-2: RNCC: 3 | RNVC: 2
24400003/343.251: RNCC: 5 | RNVC: 2
D-3778 REV D ITEM 62: RNCC: 5 | RNVC: 2

5 Jan 2012

3040-01-601-0665
Shaf Control Module

016010665
20706242-1: RNCC: 3 | RNVC: 2
D-3778 REV D ITEM 19: RNCC: 5 | RNVC: 2
24400002/343.251: RNCC: 5 | RNVC: 2

5 Jan 2012

3040-01-601-0597
Actuat Cylinder Nrp

016010597
101 210 36: RNCC: 3 | RNVC: 2
FFP101 210 36: RNCC: 5 | RNVC: 2

5 Jan 2012

3040-01-601-0596
Actuat Cylinder Nrp

016010596
101 210 35: RNCC: 3 | RNVC: 2
FFP101 210 35: RNCC: 5 | RNVC: 2

5 Jan 2012

3040-01-601-0588
Mechan Actuator Nrp

016010588
9902-407: RNCC: 3 | RNVC: 9
XPG0261500112: RNCC: 5 | RNVC: 2
L34358P10: RNCC: 5 | RNVC: 2
L34358P10: RNCC: 5 | RNVC: 2

5 Jan 2012

3040-01-601-0587
Levelwind Assem Nrp

016010587
223-0-001: RNCC: 3 | RNVC: 2

5 Jan 2012

3040-01-601-0018
Hydraulic Brake Nrp

016010018
0022-608-63-151400: RNCC: 3 | RNVC: 2
211-0-001 REV C ITEM NO.72: RNCC: 5 | RNVC: 2

5 Jan 2012

3040-01-600-9431
Shaft Collar

016009431
A1-42840D: RNCC: 3 | RNVC: 2

3 Jan 2012

3040-01-600-9442
Shaft Collar

016009442
A1-42841D: RNCC: 3 | RNVC: 2

3 Jan 2012

3040-01-600-9424
Shaft Collar

016009424
A1-42839D: RNCC: 3 | RNVC: 2

3 Jan 2012

3040-01-600-8198
Straight Shaft

016008198
845-7526216-11X1X-05: RNCC: 3 | RNVC: 1

20 Dec 2011

3040-01-600-4357
Rigid Connecting Link

016004357
113A9206-4: RNCC: 3 | RNVC: 2

29 Nov 2011

3040-01-600-4260
Rigid Connecting Link

016004260
145C3340-18: RNCC: 3 | RNVC: 2

29 Nov 2011

3040-01-600-3934
Shaft Retaining Plate

016003934
3883821: RNCC: 3 | RNVC: 2
3883821: RNCC: 5 | RNVC: 9

27 Nov 2011

3040-01-600-3902
Rigid Connecting Link

016003902
4F70244-101B: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-01-600-3880
Linear Actuating Cylinder Assembly

016003880
6E3690: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-01-600-3754
Shouldered Shaft

016003754
7C-1512: RNCC: 3 | RNVC: 2
26KP367: RNCC: 5 | RNVC: 2
26KP367: RNCC: 5 | RNVC: 9

27 Nov 2011

3040-01-600-3335
Mechanical Drive Housing

016003335
0223-06295: RNCC: 3 | RNVC: 2
27KP935: RNCC: 5 | RNVC: 2
27KP935: RNCC: 5 | RNVC: 9

23 Nov 2011

3040-01-600-3179
Ball Joint

016003179
SSF-6T: RNCC: 3 | RNVC: 2

22 Nov 2011

3040-01-600-2933
Manual Control Lever

016002933
423704: RNCC: 3 | RNVC: 2

21 Nov 2011

3040-01-600-2711
Pneumatic Accumulator

016002711
701-1037-98: RNCC: 3 | RNVC: 2

18 Nov 2011

3040-01-600-2596
Rigid Connecting Link

016002596
145C3340-16: RNCC: 3 | RNVC: 2

18 Nov 2011

3040-01-600-2594
Rigid Connecting Link

016002594
145C3340-19: RNCC: 3 | RNVC: 2

18 Nov 2011

3040-01-600-2585
Rigid Connecting Link

016002585
145C3340-20: RNCC: 3 | RNVC: 2

18 Nov 2011

3040-01-600-2587
Rigid Connecting Link

016002587
145C3340-14: RNCC: 3 | RNVC: 2

18 Nov 2011

3040-01-600-2582
Rigid Connecting Link

016002582
145C3340-13: RNCC: 3 | RNVC: 2

18 Nov 2011

3040-01-600-0183
Roller Shaft

016000183
1003386: RNCC: 3 | RNVC: 2

3 Nov 2011

3040-01-600-0173
Slide Adjuster

016000173
1003343: RNCC: 3 | RNVC: 2

3 Nov 2011

3040-01-600-0169
Slide Adjuster

016000169
1003344SRV: RNCC: 3 | RNVC: 2
1003344: RNCC: 5 | RNVC: 9

3 Nov 2011

3040-01-600-0168
Crown Shaft

016000168
1003533: RNCC: 3 | RNVC: 2

3 Nov 2011

3040-01-599-8451
Rigid Connecting Link

015998451
LS1040296: RNCC: 3 | RNVC: 2

25 Oct 2011

3040-01-599-8448
Rigid Connecting Link

015998448
LS1040765: RNCC: 3 | RNVC: 2

25 Oct 2011

3040-01-599-7783
Hydraulic Accumulator Cylinder

015997783
010265C: RNCC: 3 | RNVC: 2

21 Oct 2011

3040-01-599-7225
Body Hub

015997225
505551-1503: RNCC: 3 | RNVC: 1
FF-18509PC2: RNCC: 5 | RNVC: 1

18 Oct 2011

3040-01-599-7100
Pivot Shaft Assembly

015997100
LS1040950: RNCC: 3 | RNVC: 2

17 Oct 2011

3040-01-599-7103
Linear Actuating Cylinder Piston

015997103
LS1037208: RNCC: 1 | RNVC: 2
LS1037208: RNCC: 3 | RNVC: 2
LS1037208: RNCC: 3 | RNVC: 2
LS1037208: RNCC: 3 | RNVC: 2

17 Oct 2011

3040-01-599-6261
Mechanical Drive Housing Part

015996261
7-511315103-101: RNCC: 3 | RNVC: 2
7-511315103: RNCC: D | RNVC: 9

6 Oct 2011

3040-01-599-6256
Spur Gearshaft

015996256
7-511315157-001: RNCC: 3 | RNVC: 2
7-511315157: RNCC: D | RNVC: 9

6 Oct 2011

3040-01-599-6260
Flexible Drive Shaft

015996260
13644828: RNCC: 3 | RNVC: 2
13644828: RNCC: 5 | RNVC: 2

6 Oct 2011

3040-01-599-6255
Spur Gearshaft

015996255
7-511315171-001: RNCC: 3 | RNVC: 2
7-511315171: RNCC: D | RNVC: 9

6 Oct 2011

3040-01-599-5750
Linear Actuating Cylinder

015995750
LS1042162: RNCC: 3 | RNVC: 2

4 Oct 2011

3040-01-599-5749
Linear Actuating Cylinder

015995749
LS1042161: RNCC: 3 | RNVC: 2

4 Oct 2011

3040-01-599-5751
Linear Actuating Cylinder Piston

015995751
LS1031055: RNCC: 3 | RNVC: 2

4 Oct 2011

3040-01-599-5753
Linear Actuating Cylinder

015995753
LS1032245: RNCC: 3 | RNVC: 2

4 Oct 2011

3040-01-599-5752
Linear Actuating Cylinder Assembly

015995752
LS1032312: RNCC: 3 | RNVC: 2

4 Oct 2011

3040-01-599-4964
Remote Control Lever

015994964
LS1031150: RNCC: 3 | RNVC: 2

29 Sep 2011

3040-01-599-4385
Linear Actuating Cylinder Assembly

015994385
020822C: RNCC: 3 | RNVC: 2

27 Sep 2011

3040-01-599-4369
Linear Actuating Cylinder Assembly

015994369
020821C: RNCC: 3 | RNVC: 2

27 Sep 2011

3040-01-599-4296
Linear Actuating Cylinder Assembly

015994296
020801D: RNCC: 3 | RNVC: 2

27 Sep 2011

3040-01-599-4203
Linear Actuating Cylinder Assembly

015994203
020329C: RNCC: 3 | RNVC: 2

26 Sep 2011

3040-01-599-4197
Linear Actuating Cylinder Assembly

015994197
020328C: RNCC: 3 | RNVC: 2

26 Sep 2011

3040-01-599-4186
Linear Actuating Cylinder Assembly

015994186
020316C-24: RNCC: 3 | RNVC: 2

26 Sep 2011

3040-01-599-4175
Linear Actuating Cylinder Assembly

015994175
020791D: RNCC: 3 | RNVC: 2

26 Sep 2011

3040-01-599-4119
Linear Actuating Cylinder Assembly

015994119
020820C: RNCC: 3 | RNVC: 2

26 Sep 2011

3040-01-599-3984
Piston Ring

015993984
516-6293386 ITEM 017: RNCC: 3 | RNVC: 2

23 Sep 2011

3040-01-599-3053
Hydraulic Accumulator Cylinder

015993053
020792C: RNCC: 3 | RNVC: 2

21 Sep 2011

3040-01-599-1234
Linkage Arm Nrp

015991234
7383858-H5257208-A4B: RNCC: 3 | RNVC: 2
H5257208-A4B: RNCC: 5 | RNVC: 2
H547-0001-H5257208-A4B: RNCC: 5 | RNVC: 2
7383858-H5257208-A4BD4: RNCC: 5 | RNVC: 2
H5257208-A4BD4: RNCC: 5 | RNVC: 2
H547-0001-H5257208-A4BD4: RNCC: 5 | RNVC: 2

13 Sep 2011

3040-01-599-0530
Extension Shaft

015990530
1002897: RNCC: 3 | RNVC: 2

12 Sep 2011

3040-01-599-0523
Nonaircraft Mechanical Actuator

015990523
1002669: RNCC: 3 | RNVC: 2

12 Sep 2011

3040-01-599-0396
Pivot Shaft Assembly

015990396
984580: RNCC: 3 | RNVC: 2

12 Sep 2011

3040-01-599-0149
Lat Shaft Actuator

015990149
29-49228: RNCC: 3 | RNVC: 2

9 Sep 2011

3040-01-598-9841
Shouldered Shaft

015989841
SI12015-102: RNCC: 3 | RNVC: 2

7 Sep 2011

3040-01-598-9826
Shouldered Shaft

015989826
SI12015-101: RNCC: 3 | RNVC: 2

7 Sep 2011

3040-01-598-9685
Linear Actuating Cylinder Cap

015989685
803-2177525-X1XX-74(SE): RNCC: 3 | RNVC: 1

7 Sep 2011

3040-01-598-9679
Extension Shaft

015989679
1002902: RNCC: 3 | RNVC: 2

7 Sep 2011

3040-01-598-9668
Extension Shaft

015989668
1002903: RNCC: 3 | RNVC: 2

7 Sep 2011

3040-01-598-9549
Flexible Drive Shaft

015989549
7-511355009-001: RNCC: 1 | RNVC: 2
19E340-1A: RNCC: 3 | RNVC: 2
7-511355009: RNCC: D | RNVC: 9

6 Sep 2011

3040-01-598-9362
Shaft Collar

015989362
8386K14: RNCC: 3 | RNVC: 2

2 Sep 2011

3040-01-598-9160
Nonaircraft Mechanical Actuator

015989160
751-7072201-A12: RNCC: 3 | RNVC: 2
H821-0201-A12: RNCC: 5 | RNVC: 1

1 Sep 2011

3040-01-598-9018
Shouldered Axle

015989018
930045: RNCC: 3 | RNVC: 2

31 Aug 2011

3040-01-598-9016
Rigid Connecting Link

015989016
930030: RNCC: 3 | RNVC: 2

31 Aug 2011

3040-01-598-9014
Extension Shaft

015989014
980228: RNCC: 3 | RNVC: 2

31 Aug 2011

3040-01-598-8674
Mechanical Drive Housing Part

015988674
LS1043846: RNCC: 3 | RNVC: 2

30 Aug 2011

3040-01-598-8642
Straight Shaft

015988642
986905: RNCC: 3 | RNVC: 2

30 Aug 2011

3040-01-598-8292
Shaft Collar

015988292
6436K55: RNCC: 3 | RNVC: 2

29 Aug 2011

3040-01-598-7752
Shield Extension

015987752
1002901: RNCC: 3 | RNVC: 2

26 Aug 2011

3040-01-598-7768
Auger Extension

015987768
1002904: RNCC: 3 | RNVC: 2

26 Aug 2011

3040-01-598-7742
Straight Shaft

015987742
1001930: RNCC: 3 | RNVC: 2

26 Aug 2011

3040-01-598-7698
Pivot Shaft Assembly

015987698
1000276: RNCC: 3 | RNVC: 2

25 Aug 2011

3040-01-598-7602
Rigid Connecting Link

015987602
751-7072202-A17: RNCC: 3 | RNVC: 1
H821-0202-A17: RNCC: 3 | RNVC: 1

25 Aug 2011

3040-01-598-7165
Control Cam

015987165
751-7072335-4: RNCC: 3 | RNVC: 1
7072335-4: RNCC: 3 | RNVC: 1
751-7072305-64: RNCC: 5 | RNVC: 1
7072305-64: RNCC: 5 | RNVC: 1

23 Aug 2011

3040-01-598-6865
Shaft Idler

015986865
985011: RNCC: 3 | RNVC: 2

19 Aug 2011

3040-01-598-6814
Rotating Shaft Eye Bracket

015986814
852827: RNCC: 3 | RNVC: 2
853345: RNCC: 5 | RNVC: 9

19 Aug 2011

3040-01-598-6596
Hub Clamp

015986596
620400: RNCC: 3 | RNVC: 2

18 Aug 2011

3040-01-598-6499
Pawl

015986499
6445727-200M1: RNCC: 3 | RNVC: 2
6445727-200M1: RNCC: 3 | RNVC: 9
6445727-200M1: RNCC: 5 | RNVC: 2

18 Aug 2011

3040-01-598-5720
Air Clutch Outer Shaft End Cap

015985720
986880: RNCC: 3 | RNVC: 2
980148: RNCC: 5 | RNVC: 9

12 Aug 2011

3040-01-598-5480
Pawl

015985480
LS1044732: RNCC: 3 | RNVC: 2

11 Aug 2011

3040-01-598-5077
Nonrotating Shaft Eye Bracket

015985077
980135: RNCC: 3 | RNVC: 2

8 Aug 2011

3040-01-598-4419
Rigid Connecting Link

015984419
145C3340-15: RNCC: 3 | RNVC: 2

2 Aug 2011

3040-01-598-4416
Straight Axle

015984416
980151: RNCC: 3 | RNVC: 2

2 Aug 2011

3040-01-598-4388
Mechanical Drive Housing

015984388
12917669: RNCC: 3 | RNVC: 2

2 Aug 2011

3040-01-598-4320
Reg Connecting Link

015984320
6445639-200M1: RNCC: 3 | RNVC: 2
6445639-200M1: RNCC: 3 | RNVC: 9
6445639-200M1: RNCC: 5 | RNVC: 2

1 Aug 2011

3040-01-598-2955
Linear Actuating Cylinder Assembly Parts Kit

015982955
13228E1969: RNCC: 3 | RNVC: 2

19 Jul 2011

3040-01-598-2350
Planetary Gears Carrier

015982350
A-3204-P-1108: RNCC: 3 | RNVC: 2

13 Jul 2011

3040-01-598-2339
Shouldered Shaft

015982339
3198-M-1157: RNCC: 3 | RNVC: 2

13 Jul 2011

3040-01-598-2338
Planetary Gears Carrier

015982338
A-3204-X-1116: RNCC: 3 | RNVC: 2

13 Jul 2011

3040-01-598-2322
Linear Actuating Cylinder Piston

015982322
2230-Y-1377: RNCC: 3 | RNVC: 2

13 Jul 2011

3040-01-598-2040
Rigid Connecting Link

015982040
LS1081933: RNCC: 3 | RNVC: 2

11 Jul 2011

3040-01-598-0399
Rigid Connecting Link

015980399
124053: RNCC: 3 | RNVC: 2
24E189 FN 003: RNCC: 5 | RNVC: 1

28 Jun 2011

3040-01-598-0385
Rigid Connecting Link

015980385
124052: RNCC: 3 | RNVC: 2
24E189 FN 004: RNCC: 5 | RNVC: 1

28 Jun 2011

3040-01-597-9607
Straight Shaft Assembly

015979607
1660441: RNCC: 3 | RNVC: 2

24 Jun 2011

3040-01-597-9532
Shouldered Shaft

015979532
39-94125: RNCC: 3 | RNVC: 2

23 Jun 2011

3040-01-597-9339
Shaft Collar

015979339
C01J18071: RNCC: 3 | RNVC: 2

23 Jun 2011

3040-01-597-9095
Control Cam

015979095
12931581: RNCC: 3 | RNVC: 2

22 Jun 2011

3040-01-597-8706
Straight Shaft

015978706
4962G: RNCC: 3 | RNVC: 2

21 Jun 2011

3040-01-597-7232
Straight Shaft Assembly

015977232
24684: RNCC: 3 | RNVC: 2

20 Jun 2011

3040-01-597-6756
Nonrotating Shaft Eye Bracket

015976756
C01Z10290: RNCC: 3 | RNVC: 2

20 Jun 2011

3040-01-597-6748
Rotating Shaft Eye Bracket

015976748
C01J18062: RNCC: 3 | RNVC: 2

20 Jun 2011

3040-01-597-6689
Shouldered Shaft

015976689
060106-004: RNCC: 3 | RNVC: 2

20 Jun 2011

3040-01-597-6619
Shouldered Shaft

015976619
050000-070: RNCC: 3 | RNVC: 2

20 Jun 2011

3040-01-597-6603
Housing Adapter

015976603
15795N18: RNCC: 3 | RNVC: 1

20 Jun 2011

3040-01-597-6590
Shaft Retaining Plate

015976590
35326602: RNCC: 3 | RNVC: 2

20 Jun 2011

3040-01-597-6404
Shaft Collar

015976404
15755N18: RNCC: 3 | RNVC: 1

17 Jun 2011

3040-01-597-6263
Spur Gearshaft

015976263
36764827: RNCC: 3 | RNVC: 2

17 Jun 2011

3040-01-597-6265
Mechanical Drive Housing

015976265
36723641: RNCC: 3 | RNVC: 2

17 Jun 2011

3040-01-597-6194
Worm Shaft

015976194
14-4331-12.5: RNCC: 3 | RNVC: 2

16 Jun 2011

3040-01-597-5856
Mechanical Drive Housing

015975856
1C020-04014: RNCC: 3 | RNVC: 2

15 Jun 2011

3040-01-597-4393
Control Cable Assembly

015974393
57353-00-L21,3M: RNCC: 3 | RNVC: 2

9 Jun 2011

3040-01-597-4092
Spec Hub Adapter

015974092
29507745: RNCC: 3 | RNVC: 2
29507745: RNCC: 3 | RNVC: 2
9HB913: RNCC: 5 | RNVC: 2
9HB913: RNCC: 5 | RNVC: 9
29507745: RNCC: 5 | RNVC: 9

9 Jun 2011

3040-01-597-3752
Linear Actuating Cylinder Assembly

015973752
PG200016G: RNCC: 3 | RNVC: 2

8 Jun 2011

3040-01-597-3508
Water Cannon Valve

015973508
02920200: RNCC: 3 | RNVC: 2

8 Jun 2011

3040-01-597-3234
Shouldered Shaft

015973234
63775001: RNCC: 3 | RNVC: 2

7 Jun 2011

3040-01-597-3230
Shouldered Shaft

015973230
63771001: RNCC: 3 | RNVC: 2

7 Jun 2011

3040-01-597-3112
Extension Shaft

015973112
317800R91-KS: RNCC: 3 | RNVC: 2

6 Jun 2011

3040-01-597-3066
Worm Shaft

015973066
63935901: RNCC: 3 | RNVC: 2

6 Jun 2011

3040-01-597-2943
Straight Shaft

015972943
4658959: RNCC: 3 | RNVC: 2

6 Jun 2011

3040-01-597-2590
Small Guide Rod

015972590
131J638ITEM28: RNCC: 3 | RNVC: 9

3 Jun 2011

3040-01-597-2587
Large Guide Rod

015972587
131J638ITEM24: RNCC: 3 | RNVC: 9

3 Jun 2011

3040-01-597-2576
Lower Outr Cylinder

015972576
131J637ITEM9: RNCC: 3 | RNVC: 9

3 Jun 2011

3040-01-597-2573
Upper Outr Cylinder

015972573
131J637ITEM8: RNCC: 3 | RNVC: 9

3 Jun 2011

3040-01-597-2380
Mechanical Drive Housing

015972380
133765: RNCC: 3 | RNVC: 2

2 Jun 2011

3040-01-597-2314
Linear Actuating Cylinder Assembly

015972314
3255723: RNCC: 3 | RNVC: 2

2 Jun 2011

3040-01-597-2150
Shouldered Shaft

015972150
060000-076: RNCC: 3 | RNVC: 2

2 Jun 2011

3040-01-597-2144
Shouldered Shaft

015972144
133764: RNCC: 3 | RNVC: 2

2 Jun 2011

3040-01-597-2052
Connectorassembly

015972052
2099-145: RNCC: 3 | RNVC: 9
2099-145: RNCC: C | RNVC: 1

1 Jun 2011

3040-01-597-1892
Extension Shaft

015971892
AV2090392: RNCC: 3 | RNVC: 2

1 Jun 2011

3040-01-597-1301
Rigid Connecting Link

015971301
MK4617575: RNCC: 3 | RNVC: 2

27 May 2011

3040-01-597-0647
Shouldered Shaft

015970647
12917795: RNCC: 3 | RNVC: 2

25 May 2011

3040-01-597-0648
Nonaircraft Mechanical Actuator

015970648
12919245: RNCC: 3 | RNVC: 2

25 May 2011

3040-01-597-0634
Shouldered Shaft

015970634
12420813-001: RNCC: 3 | RNVC: 2
12420813: RNCC: D | RNVC: 9

25 May 2011

3040-01-596-8136
Shouldered Shaft

015968136
MK4617563: RNCC: 3 | RNVC: 2
MK4617563: RNCC: 5 | RNVC: 9

25 May 2011

3040-01-596-8119
Shouldered Shaft

015968119
MK3087573: RNCC: 3 | RNVC: 2

25 May 2011

3040-01-596-7899
Rigid Connecting Link

015967899
03002A1519-1: RNCC: 3 | RNVC: 2

25 May 2011

3040-01-596-7652
Control Cam

015967652
12919252: RNCC: 3 | RNVC: 2

24 May 2011

3040-01-596-7491
Control Cam

015967491
12918571: RNCC: 3 | RNVC: 2

24 May 2011

3040-01-596-7233
Spur Gearshaft

015967233
839-020A: RNCC: 3 | RNVC: 2
05-020A: RNCC: 5 | RNVC: 2

23 May 2011

3040-01-596-7137
Hydraulic Control Assembly

015967137
1711-999-000: RNCC: 3 | RNVC: 2
0511PL FN 3 P/N 1711-999-000: RNCC: 5 | RNVC: 2

23 May 2011

3040-01-596-7122
Linear Actuating Cylinder Assembly

015967122
RE506335: RNCC: 3 | RNVC: 2
RE506335: RNCC: 3 | RNVC: 9

23 May 2011

3040-01-596-6974
Straight Shaft

015966974
5-14-639-6: RNCC: 3 | RNVC: 2

23 May 2011

3040-01-596-5628
Nonaircraft Mechanical Actuator

015965628
0511-15-S711-100: RNCC: 3 | RNVC: 2
0511PL ASSY 0511-15-S711-100: RNCC: 5 | RNVC: 2

19 May 2011

3040-01-596-5557
Pneumatic Rotor

015965557
16877: RNCC: 3 | RNVC: 2

19 May 2011

3040-01-596-5347
Rigid Connecting Link

015965347
5S073777: RNCC: 3 | RNVC: 2
22KP517: RNCC: 5 | RNVC: 2
22KP517: RNCC: 5 | RNVC: 9
3A057043: RNCC: D | RNVC: 9

19 May 2011

3040-01-596-5163
Control Cam

015965163
803-1623058 PC 28 SS: RNCC: 3 | RNVC: 2
803-1623058 PC NO.28 MOD SS: RNCC: 5 | RNVC: 2

18 May 2011

3040-01-596-5102
Straight Shaft

015965102
2534F82GP1: RNCC: 3 | RNVC: 1

18 May 2011

3040-01-596-4274
Rigid Connecting Link

015964274
220090-1: RNCC: 3 | RNVC: 2

17 May 2011

3040-01-596-4261
Helical Gear And Shaft Assembly

015964261
200413111-01: RNCC: 3 | RNVC: 2

17 May 2011

3040-01-596-4026
Control Platform

015964026
F094583: RNCC: 3 | RNVC: 2

16 May 2011

3040-01-596-3688
Control Cable Assembly

015963688
54TA-71: RNCC: 3 | RNVC: 2
B-54TA-71: RNCC: 5 | RNVC: 2

16 May 2011

3040-01-596-3687
Shouldered Shaft

015963687
3032658-200: RNCC: 3 | RNVC: 2

16 May 2011

3040-01-596-3519
Nonaircraft Mechanical Actuator

015963519
7D3-05257-2: RNCC: 3 | RNVC: 2

13 May 2011

3040-01-596-2053
Shouldered Shaft

015962053
348483: RNCC: 3 | RNVC: 2

13 May 2011

3040-01-596-1806
Nonaircraft Mechanical Actuator

015961806
7D3-05257: RNCC: 3 | RNVC: 2

13 May 2011

3040-01-596-1704
Rigid Connecting Link

015961704
PE2275-6-0: RNCC: 3 | RNVC: 2

13 May 2011

3040-01-596-1661
Ball Joint

015961661
28176-4: RNCC: 3 | RNVC: 2
198034: RNCC: 5 | RNVC: 2
20933AF001 FIND NO.110: RNCC: 5 | RNVC: 2

13 May 2011

3040-01-596-1622
Manual Control Lever Assembly

015961622
2942018: RNCC: 3 | RNVC: 2

13 May 2011

3040-01-596-1229
Shouldered Shaft

015961229
23066614-8: RNCC: 3 | RNVC: 2

12 May 2011

3040-01-596-0960
Linear Actuating Cylinder

015960960
H06825RB: RNCC: 3 | RNVC: 2

11 May 2011

3040-01-596-0820
Nonrotating Shaft Eye Bracket

015960820
7548088-40: RNCC: 3 | RNVC: 2

11 May 2011

3040-01-596-0803
Rigid Connecting Link

015960803
7548088-50: RNCC: 3 | RNVC: 2

11 May 2011

3040-01-596-0525
Fan Adapter

015960525
4N1744: RNCC: 3 | RNVC: 2

11 May 2011

3040-01-596-0454
Shouldered Shaft

015960454
449-092-055-157: RNCC: 3 | RNVC: 2
449-092-055-157: RNCC: 3 | RNVC: 2

11 May 2011

3040-01-596-0034
Mechanical Drive Housing

015960034
SA88210047: RNCC: 3 | RNVC: 2
2GE428: RNCC: 5 | RNVC: 2
2GE428: RNCC: 5 | RNVC: 9

10 May 2011

3040-01-595-9807
Tension Spring Assembly

015959807
F112123: RNCC: 3 | RNVC: 2
7D3-05077 REV.J IT NO 6: RNCC: 5 | RNVC: 2

9 May 2011

3040-01-595-9611
Rigid Connecting Link

015959611
780001-2: RNCC: 3 | RNVC: 2

9 May 2011

3040-01-595-9456
Helical Gear And Shaft Assembly

015959456
200413110-01: RNCC: 3 | RNVC: 2

9 May 2011

3040-01-595-8908
Mechanical Drive Housing

015958908
4142A409: RNCC: 3 | RNVC: 2

6 May 2011

3040-01-595-7538
Operating Shaft

015957538
7383858-H5471906-003: RNCC: 3 | RNVC: 1
H547-0001-H5471906-003: RNCC: 5 | RNVC: 1
H5471906-003: RNCC: 5 | RNVC: 1
H547-1906-3: RNCC: 5 | RNVC: 1
167-7384259-3: RNCC: 5 | RNVC: 1
H547-0001-H5471906-003D4: RNCC: 5 | RNVC: 2
167-7384259-3D4: RNCC: 5 | RNVC: 2
7383858-H5471906-003D4: RNCC: 5 | RNVC: 2
H547-1906-3D4: RNCC: 5 | RNVC: 2
H5471906-003D4: RNCC: 5 | RNVC: 2

5 May 2011

3040-01-595-7127
Straight Shaft

015957127
152542A: RNCC: 3 | RNVC: 2
152542A: RNCC: 3 | RNVC: 9
151456 ITEM NO. 9: RNCC: 5 | RNVC: 2
151456 ITEM NO. 9: RNCC: 5 | RNVC: 9

5 May 2011

3040-01-595-7114
Housing Adapter

015957114
60027452: RNCC: 3 | RNVC: 9

5 May 2011

3040-01-595-6788
Ball Joint

015956788
DV1745-021-1: RNCC: 3 | RNVC: 2

4 May 2011

3040-01-595-6603
Worm Shaft

015956603
10903: RNCC: 3 | RNVC: 2

4 May 2011

3040-01-595-6172
Ball Joint

015956172
DV1745-020-1: RNCC: 3 | RNVC: 2

3 May 2011

3040-01-595-5695
Pawl

015955695
204-83019-13: RNCC: 3 | RNVC: 2

2 May 2011

3040-01-595-5537
Pivot Shaft Assembly

015955537
204-030: RNCC: 3 | RNVC: 2
204-030: RNCC: 3 | RNVC: 2
204-030: RNCC: 5 | RNVC: 2
2304-030: RNCC: 5 | RNVC: 9

2 May 2011

3040-01-595-5496
Shouldered Shaft

015955496
721-8217297-27: RNCC: 3 | RNVC: 2
741-8217287-35: RNCC: 5 | RNVC: 1
H861-6000-35: RNCC: 5 | RNVC: 1
H861-8110-27: RNCC: 5 | RNVC: 2

2 May 2011

3040-01-595-5111
Rigid Connecting Link

015955111
5749856-009: RNCC: 3 | RNVC: 2

29 Apr 2011

3040-01-595-4913
Linear Actuating Cylinder Assembly

015954913
2 1/2HSCP1C12-2-2-S-3000: RNCC: 3 | RNVC: 2

28 Apr 2011

3040-01-697-0815
Tension Spring Assembly

016970815
BL16647-1: RNCC: 3 | RNVC: 2

31 Aug 2021

3040-01-696-9251
Shaft Retaining Plate

016969251
63-91479-01: RNCC: 3 | RNVC: 2

24 Aug 2021

3040-01-696-9238
Shaft Retaining Plate

016969238
63-9959-01: RNCC: 3 | RNVC: 2

24 Aug 2021

3040-01-595-4212
Helical Gearshaft

015954212
7383858-H5471903-007: RNCC: 3 | RNVC: 2
H547-0001-H5471903-007: RNCC: 5 | RNVC: 2
167-7384215-7D4: RNCC: 5 | RNVC: 2
H5471903-007D4: RNCC: 5 | RNVC: 2
7383858-H5471903-007D4: RNCC: 5 | RNVC: 2
167-7384215-7: RNCC: 5 | RNVC: 2
H5471903-007: RNCC: 5 | RNVC: 2
H547-1903-7: RNCC: 5 | RNVC: 2
H547-1903-7D4: RNCC: 5 | RNVC: 2
H547-0001-H5471903-007D4: RNCC: 5 | RNVC: 2

27 Apr 2011

3040-01-595-3851
Rigid Connecting Link

015953851
32013-3: RNCC: 3 | RNVC: 2
CAU11910: RNCC: 5 | RNVC: 2
CAU11910: RNCC: 5 | RNVC: 2

26 Apr 2011

3040-01-594-7886
Hydraulic Accumulator

015947886
5202-018: RNCC: 3 | RNVC: 2

25 Apr 2011

3040-01-594-7788
Rigid Connecting Link

015947788
2860186: RNCC: 3 | RNVC: 2

25 Apr 2011

3040-01-594-7483
Shouldered Shaft

015947483
2532996107: RNCC: 3 | RNVC: 2

25 Apr 2011

3040-01-594-3642
Inertia Damper

015943642
177-9024: RNCC: 3 | RNVC: 2

25 Apr 2011

3040-01-594-2280
Linear Actuating Cylinder Assembly

015942280
12505544: RNCC: 3 | RNVC: 2
12505544: RNCC: 5 | RNVC: 2
12505544: RNCC: 5 | RNVC: 2

25 Apr 2011

3040-01-594-2043
Mechanically Actuated Spindle

015942043
5073J148-1: RNCC: 3 | RNVC: 2

25 Apr 2011

3040-01-594-1729
Spec Rod A.

015941729
6E-1847: RNCC: 3 | RNVC: 2

22 Apr 2011

3040-01-593-9774
Shouldered Shaft

015939774
400384: RNCC: 3 | RNVC: 2

22 Apr 2011

3040-01-593-9532
Rigid Connecting Link

015939532
9194810-1: RNCC: 3 | RNVC: 2

22 Apr 2011

3040-01-593-9449
Straight Shaft

015939449
INLS001456-000: RNCC: 3 | RNVC: 2

21 Apr 2011

3040-01-593-9447
Repair Kit Steering

015939447
INLS001455-000: RNCC: 3 | RNVC: 2

21 Apr 2011

3040-01-695-5391
Breather

016955391
DC-XD-6: RNCC: 3 | RNVC: 2

10 Jun 2021

3040-01-593-8846
Mechanically Actuated Spindle

015938846
17590-0319: RNCC: 3 | RNVC: 2

20 Apr 2011

3040-01-593-8844
Mechanically Actuated Spindle

015938844
17590-0318: RNCC: 3 | RNVC: 2

20 Apr 2011

3040-01-593-8639
Straight Axle

015938639
605353-5: RNCC: 3 | RNVC: 2

20 Apr 2011

3040-01-593-8019
Adjusting Rod

015938019
3930AS664: RNCC: 3 | RNVC: 2
74A733096-2001: RNCC: 5 | RNVC: 2

18 Apr 2011

3040-01-593-7949
Straight Shaft

015937949
LPIAHS0110: RNCC: 3 | RNVC: 2
LPIAHS0110: RNCC: 3 | RNVC: 9
LPIAHS0101: RNCC: D | RNVC: 9

18 Apr 2011

3040-01-593-7950
Remote Control Lever

015937950
47X11-02208: RNCC: 3 | RNVC: 2

18 Apr 2011

3040-01-593-7887
Spur Gearshaft

015937887
47X11-02203: RNCC: 3 | RNVC: 2

18 Apr 2011

3040-01-593-7876
Control Cam

015937876
H692-1802-197: RNCC: 3 | RNVC: 2
595-7067876-197: RNCC: 3 | RNVC: 2

18 Apr 2011

3040-01-593-7775
Control Cam

015937775
H692-1802-196: RNCC: 3 | RNVC: 2
595-7067876-196: RNCC: 3 | RNVC: 2

15 Apr 2011

3040-01-593-7483
Rigid Connecting Link

015937483
7548089-40: RNCC: 3 | RNVC: 2

15 Apr 2011

3040-01-593-7458
Rigid Connecting Link

015937458
721-8217289-A6: RNCC: 3 | RNVC: 2
H861-6000-45: RNCC: 5 | RNVC: 1
741-8217287-45: RNCC: 5 | RNVC: 1
H861-6110-A6: RNCC: 5 | RNVC: 2

15 Apr 2011

3040-01-593-7386
Control Cam Assembly

015937386
751-7072345-A2: RNCC: 3 | RNVC: 2
751-7072302-29: RNCC: 5 | RNVC: 1
H821-0302-29: RNCC: 5 | RNVC: 1

14 Apr 2011

3040-01-593-7350
Linear Actuating Cylinder Piston Rod

015937350
721-8217289-8: RNCC: 3 | RNVC: 2
H861-6110-8: RNCC: 5 | RNVC: 2

14 Apr 2011

3040-01-593-7230
Shouldered Shaft

015937230
055-0017R000: RNCC: 3 | RNVC: 2

14 Apr 2011

3040-01-593-7235
Shouldered Shaft

015937235
055-0016R000: RNCC: 3 | RNVC: 2

14 Apr 2011

3040-01-593-7083
Remote Control Lever

015937083
721-8217297-6: RNCC: 3 | RNVC: 2
H861-8110-6: RNCC: 5 | RNVC: 2

14 Apr 2011

3040-01-593-5415
Rigid Connecting Link

015935415
751-7072501-45: RNCC: 3 | RNVC: 1
7072538-2: RNCC: 3 | RNVC: 2
H821-0501-45: RNCC: 5 | RNVC: 1
751-7072502-45: RNCC: 5 | RNVC: 2
751-7072538-2: RNCC: 5 | RNVC: 2
7072538-2: RNCC: 5 | RNVC: 2
H821-0502-45: RNCC: 5 | RNVC: 2

11 Apr 2011

3040-01-593-3956
Rigid Connecting Link

015933956
803-6397268 PC 170: RNCC: 3 | RNVC: 2
803-6397269 ASSY N-1: RNCC: 5 | RNVC: 2

7 Apr 2011

3040-01-593-3072
Pawl

015933072
SL19361 ITEM 15: RNCC: 3 | RNVC: 2
MANUAL 1B.1197 IT 15: RNCC: 5 | RNVC: 2

6 Apr 2011

3040-01-593-2955
Extension Shaft

015932955
13013697: RNCC: 3 | RNVC: 2

6 Apr 2011

3040-01-593-2247
Rigid Connecting Link

015932247
721-8217297-A2: RNCC: 3 | RNVC: 2
H861-6000-34: RNCC: 5 | RNVC: 1
741-8217287-34: RNCC: 5 | RNVC: 1
H861-8110-A2: RNCC: 5 | RNVC: 2

5 Apr 2011

3040-01-592-9724
Control Cam

015929724
21C14002P29: RNCC: 3 | RNVC: 2

30 Mar 2011

3040-01-592-9437
Out Pin-Ovld Clutch

015929437
42315-398-101: RNCC: 3 | RNVC: 2

29 Mar 2011

3040-01-592-9257
Shouldered Shaft

015929257
767052: RNCC: 3 | RNVC: 2

29 Mar 2011

3040-01-592-9055
Rigid Connecting Link

015929055
3922AS170-2: RNCC: 3 | RNVC: 2

28 Mar 2011

3040-01-592-8425
Shouldered Shaft Assembly

015928425
12409-6: RNCC: 3 | RNVC: 9
12409-6: RNCC: C | RNVC: 1

22 Mar 2011

3040-01-592-6148
Straight Shaft

015926148
21C14002P31: RNCC: 3 | RNVC: 2
21C14002P31: RNCC: 5 | RNVC: 2

14 Mar 2011

3040-01-592-6150
Straight Shaft

015926150
21C14076P25: RNCC: 3 | RNVC: 2
21C14076P25: RNCC: 5 | RNVC: 2

14 Mar 2011

3040-01-592-5289
Shaft Collar

015925289
3922AS168-3: RNCC: 3 | RNVC: 2

9 Mar 2011

3040-01-592-5282
Rigid Connecting Link

015925282
3922AS168-4: RNCC: 3 | RNVC: 2

9 Mar 2011

3040-01-592-5274
Rigid Connecting Link

015925274
3922AS168-2: RNCC: 3 | RNVC: 2

9 Mar 2011

3040-01-592-5275
Rigid Connecting Link

015925275
3922AS168-6: RNCC: 3 | RNVC: 2

9 Mar 2011

3040-01-592-4725
Mechanically Actuated Spindle

015924725
3922AS141-2: RNCC: 3 | RNVC: 2

8 Mar 2011

3040-01-592-3187
Mechanical Drive Housing

015923187
7040249-1: RNCC: 3 | RNVC: 2

2 Mar 2011

3040-01-592-2669
Straight Shaft

015922669
LS1043841: RNCC: 3 | RNVC: 2

1 Mar 2011

3040-01-592-2024
Extension Shaft

015922024
52605-1-145-000: RNCC: 3 | RNVC: 2
0511PL FN6: RNCC: 5 | RNVC: 2

24 Feb 2011

3040-01-592-1776
Linear Actuating Cylinder

015921776
71412635: RNCC: 3 | RNVC: 2
24KP134: RNCC: 5 | RNVC: 2
24KP134: RNCC: 5 | RNVC: 9

23 Feb 2011

3040-01-592-1774
Linear Actuating Cylinder Piston

015921774
71412629: RNCC: 3 | RNVC: 2
24KP130: RNCC: 5 | RNVC: 2
24KP130: RNCC: 5 | RNVC: 9

23 Feb 2011

3040-01-592-0142
Linear Actuating Cylinder Assembly

015920142
71412633: RNCC: 3 | RNVC: 2
24KP133: RNCC: 5 | RNVC: 2
24KP133: RNCC: 5 | RNVC: 9

17 Feb 2011

3040-01-592-0141
Linear Actuating Cylinder Assembly

015920141
160805B: RNCC: 3 | RNVC: 2
3849753: RNCC: 3 | RNVC: 9
3849753: RNCC: 5 | RNVC: 2
12542920: RNCC: 7 | RNVC: 2

17 Feb 2011

3040-01-592-0140
Linear Actuating Cylinder Assembly

015920140
71412630: RNCC: 3 | RNVC: 2
24KP131: RNCC: 5 | RNVC: 2
24KP131: RNCC: 5 | RNVC: 9

17 Feb 2011

3040-01-592-0139
Linear Actuating Cylinder Assembly

015920139
71412631: RNCC: 3 | RNVC: 2
24KP132: RNCC: 5 | RNVC: 2
24KP132: RNCC: 5 | RNVC: 9

17 Feb 2011

3040-01-592-0138
Linear Actuating Cylinder Assembly

015920138
71413560: RNCC: 3 | RNVC: 2
24KP135: RNCC: 5 | RNVC: 2
24KP135: RNCC: 5 | RNVC: 9

17 Feb 2011

3040-01-591-9627
Linear Actuating Cylinder Assembly

015919627
9234731J: RNCC: 3 | RNVC: 9

16 Feb 2011

3040-01-591-9579
Body Hub

015919579
200413294-01: RNCC: 3 | RNVC: 2

16 Feb 2011

3040-01-591-8905
Rigid Connecting Link

015918905
102433-0030: RNCC: 3 | RNVC: 2
MV276G-001-8 ITEM NO. 29: RNCC: 5 | RNVC: 2

14 Feb 2011

3040-01-591-8051
Rotary Actuating Cylinder Assembly

015918051
ER16-08F8321-D-4AA2A-007-RSA: RNCC: 3 | RNVC: 2
070040 ITEM 4: RNCC: 5 | RNVC: 1

10 Feb 2011

3040-01-591-7982
Housing Adapter

015917982
793653-001: RNCC: 3 | RNVC: 2
S9553-CH-MMO-010 FIG 7-17-15: RNCC: 5 | RNVC: 2

10 Feb 2011

3040-01-689-7197
Remote Control Lever

016897197
64062-101: RNCC: 3 | RNVC: 2

7 Jul 2020

3040-01-591-7347
Nonrotating Shaft Eye Bracket

015917347
587208: RNCC: 3 | RNVC: 2

7 Feb 2011

Load More Results