What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 166 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 166 of 300

3040-01-623-0162
Shouldered Shaft

016230162
596-7551510-61: RNCC: 3 | RNVC: 2
B831-9242-61: RNCC: 5 | RNVC: 2

29 Oct 2013

3040-01-623-0078
Shouldered Shaft

016230078
596-7551510-62: RNCC: 3 | RNVC: 2
B831-9242-62: RNCC: 5 | RNVC: 2

29 Oct 2013

3040-01-623-0108
Shouldered Shaft

016230108
596-7551510-63: RNCC: 3 | RNVC: 2
B831-9242-63: RNCC: 5 | RNVC: 2

29 Oct 2013

3040-01-623-0015
Rigid Connecting Link

016230015
162D622210-1002: RNCC: 3 | RNVC: 2
162D622210-1002: RNCC: 5 | RNVC: 2

29 Oct 2013

3040-01-622-9970
Control Cyl

016229970
M25-15795-0: RNCC: 3 | RNVC: 2
M25-08662-0 ITEM 65: RNCC: 5 | RNVC: 2

29 Oct 2013

3040-01-622-9190
Worm Shaft

016229190
586-7666837 ITEM NO 6: RNCC: 3 | RNVC: 2
586-8396531 ITEM NO 6: RNCC: 5 | RNVC: 2
586-7666837: RNCC: D | RNVC: 9
586-8396531: RNCC: D | RNVC: 9

25 Oct 2013

3040-01-622-9127
Nonaircraft Mechanical Actuator

016229127
M3480-4: RNCC: 3 | RNVC: 2
M3480: RNCC: D | RNVC: 9

24 Oct 2013

3040-01-622-8275
Rigid Connecting Link

016228275
4131428: RNCC: 3 | RNVC: 2

23 Oct 2013

3040-01-622-8274
Rigid Connecting Link

016228274
4131445: RNCC: 3 | RNVC: 2

23 Oct 2013

3040-01-622-8169
Rigid Connecting Link

016228169
4118680: RNCC: 3 | RNVC: 2

23 Oct 2013

3040-01-622-8136
Rigid Connecting Link

016228136
4117817: RNCC: 3 | RNVC: 2

23 Oct 2013

3040-01-622-8137
Rigid Connecting Link

016228137
4117816: RNCC: 3 | RNVC: 2

23 Oct 2013

3040-01-622-8082
Rigid Connecting Link

016228082
4115744-01: RNCC: 3 | RNVC: 2

23 Oct 2013

3040-01-622-8030
Rigid Connecting Link

016228030
4113982-01: RNCC: 3 | RNVC: 2

23 Oct 2013

3040-01-622-8023
Housing Adapter

016228023
4113975: RNCC: 3 | RNVC: 2

23 Oct 2013

3040-01-622-8017
Counterbalance Weight

016228017
4113750: RNCC: 3 | RNVC: 2

23 Oct 2013

3040-01-622-7995
Rigid Connecting Link

016227995
4112132-01: RNCC: 3 | RNVC: 2

23 Oct 2013

3040-01-622-7996
Rigid Connecting Link

016227996
4112133-01: RNCC: 3 | RNVC: 2

23 Oct 2013

3040-01-622-7977
Rigid Connecting Link

016227977
4111946-01: RNCC: 3 | RNVC: 2

23 Oct 2013

3040-01-622-7966
Counterbalance Weight

016227966
4111827: RNCC: 3 | RNVC: 2

23 Oct 2013

3040-01-622-7957
Counterbalance Weight

016227957
4111825: RNCC: 3 | RNVC: 2

23 Oct 2013

3040-01-622-7963
Counterbalance Weight

016227963
4111826: RNCC: 3 | RNVC: 2

23 Oct 2013

3040-01-622-7956
Counterbalance Weight

016227956
4111824: RNCC: 3 | RNVC: 2

23 Oct 2013

3040-01-622-7944
Rigid Connecting Link

016227944
4111719-01: RNCC: 3 | RNVC: 2

23 Oct 2013

3040-01-622-7913
Rigid Connecting Link

016227913
4110724: RNCC: 3 | RNVC: 2

23 Oct 2013

3040-01-622-7823
Accumulator Nrp

016227823
8A30-56SS-A9328: RNCC: 3 | RNVC: 2
0610C03-0412-02: RNCC: 5 | RNVC: 2
60424: RNCC: 5 | RNVC: 2
0610C03-0412 ITEM NO. 5: RNCC: 5 | RNVC: 2

23 Oct 2013

3040-01-622-6665
Linear Actuating Cylinder Assembly

016226665
A1200SRC: RNCC: 3 | RNVC: 2

17 Oct 2013

3040-01-622-5398
Shaft Collar

016225398
539 30 01-23: RNCC: 3 | RNVC: 2
CV200180: RNCC: 5 | RNVC: 2
5393001-23: RNCC: 5 | RNVC: 2
539 30 01-23: RNCC: 5 | RNVC: 9

10 Oct 2013

3040-01-622-4969
Linear Actuating Cylinder Assembly

016224969
542 19 97-61: RNCC: 3 | RNVC: 2

9 Oct 2013

3040-01-622-3463
Helical-Spur Gearshaft

016223463
123900-25060: RNCC: 3 | RNVC: 9
123900-25060: RNCC: C | RNVC: 1

4 Oct 2013

3040-01-622-1834
Shaft Collar

016221834
1A091-2392-0: RNCC: 3 | RNVC: 2

1 Oct 2013

3040-01-622-1780
Shaft Collar

016221780
1A091-2347-0: RNCC: 3 | RNVC: 2

1 Oct 2013

3040-01-622-1740
Nonaircraft Mechanical Actuator

016221740
M2945-008: RNCC: 3 | RNVC: 2

30 Sep 2013

3040-01-622-1736
Nonaircraft Mechanical Actuator

016221736
M2945-007: RNCC: 3 | RNVC: 2

30 Sep 2013

3040-01-622-0037
Disc Brake Caliper Assembly

016220037
120-220: RNCC: 3 | RNVC: 2
120-2280: RNCC: 5 | RNVC: 9

25 Sep 2013

3040-01-621-9286
Tension Spring Assembly

016219286
1G790-5700-0: RNCC: 3 | RNVC: 2

23 Sep 2013

3040-01-621-9285
Shaft Collar

016219285
1A091-2393-0: RNCC: 3 | RNVC: 2

23 Sep 2013

3040-01-621-9276
Shaft Collar

016219276
1A091-2348-0: RNCC: 3 | RNVC: 2

23 Sep 2013

3040-01-621-9257
Tension Spring Assembly

016219257
1A021-5770-0: RNCC: 3 | RNVC: 2

23 Sep 2013

3040-01-621-8552
Mechanically Actuated Spindle

016218552
8100-1253-0238 PT NO 829: RNCC: 3 | RNVC: 2
8100-1253-0238: RNCC: D | RNVC: 9

19 Sep 2013

3040-01-621-8441
Electr Actuator Nrp

016218441
PT101263: RNCC: 3 | RNVC: 2

19 Sep 2013

3040-01-621-7311
Shaft Collar

016217311
1G790-1619-0: RNCC: 3 | RNVC: 2

17 Sep 2013

3040-01-621-6312
Planetary Gears Carrier

016216312
XP51117200007: RNCC: 3 | RNVC: 2

13 Sep 2013

3040-01-621-6237
Shaft Collar

016216237
19202-2325-0: RNCC: 3 | RNVC: 2

13 Sep 2013

3040-01-621-5961
Shouldered Shaft

016215961
13220E1027: RNCC: 3 | RNVC: 2
11002C0300: RNCC: D | RNVC: 9

12 Sep 2013

3040-01-621-4734
Rotating Shaft Eye Bracket

016214734
061729: RNCC: 3 | RNVC: 2

9 Sep 2013

3040-01-621-4688
Straight Shaft

016214688
300900-1: RNCC: 3 | RNVC: 9
50025-02LH-2: RNCC: 5 | RNVC: 2
50025 ITEM 17: RNCC: 5 | RNVC: 2
300900-1: RNCC: C | RNVC: 1

9 Sep 2013

3040-01-621-4513
Mechanical Drive Housing

016214513
185-5800: RNCC: 3 | RNVC: 2

9 Sep 2013

3040-01-621-4288
Hydraulic Control Assembly

016214288
VCA-308170: RNCC: 3 | RNVC: 2

7 Sep 2013

3040-01-621-3975
Shouldered Shaft

016213975
400-4674867 ITEM 25: RNCC: 3 | RNVC: 2

5 Sep 2013

3040-01-621-2336
Helical-Spur Gearshaft

016212336
1A021-2425-0: RNCC: 3 | RNVC: 2

28 Aug 2013

3040-01-621-2281
Shaft Collar

016212281
1G730-3709-0: RNCC: 3 | RNVC: 2

28 Aug 2013

3040-01-621-2280
Shaft Collar

016212280
1A091-2391-0: RNCC: 3 | RNVC: 2

28 Aug 2013

3040-01-621-2216
Shaft Collar

016212216
1A091-2394-0: RNCC: 3 | RNVC: 2

28 Aug 2013

3040-01-621-1953
Brake Shoe

016211953
244-7939-S: RNCC: 3 | RNVC: 9
244-7939-S: RNCC: C | RNVC: 1

27 Aug 2013

3040-01-621-1009
Ballscrew Assembly

016211009
25-4930B: RNCC: 3 | RNVC: 2

23 Aug 2013

3040-01-621-0797
Spur Gearshaft

016210797
531820-2: RNCC: 3 | RNVC: 2
531820-2: RNCC: 3 | RNVC: 9
531820-2: RNCC: 5 | RNVC: 9

22 Aug 2013

3040-01-621-0777
Ballscrew Assembly

016210777
25-4931: RNCC: 3 | RNVC: 2

22 Aug 2013

3040-01-621-0486
Linear Actuating Cylinder

016210486
347/23291: RNCC: 3 | RNVC: 2
347-23291: RNCC: 5 | RNVC: 2
347-23291: RNCC: 5 | RNVC: 9

21 Aug 2013

3040-01-620-9744
Linear Actuating Cylinder Piston

016209744
TAS657003: RNCC: 3 | RNVC: 2

20 Aug 2013

3040-01-620-8416
Helical-Spur Gearshaft

016208416
119802-25051: RNCC: 3 | RNVC: 9
119802-25051: RNCC: 5 | RNVC: 2
119802-25051: RNCC: C | RNVC: 1

14 Aug 2013

3040-01-620-8202
Flexible Shaft Assembly Casing

016208202
CCX63317: RNCC: 3 | RNVC: 2

13 Aug 2013

3040-01-620-7221
Shouldered Shaft

016207221
62.54.220: RNCC: 3 | RNVC: 2
62.54.220: RNCC: 3 | RNVC: 9
549094: RNCC: 5 | RNVC: 2

7 Aug 2013

3040-01-620-6595
Rigid Connecting Link

016206595
12519539: RNCC: 3 | RNVC: 2
12519539: RNCC: 5 | RNVC: 2
12519539: RNCC: D | RNVC: 9

5 Aug 2013

3040-01-620-6488
Rigid Connecting Link

016206488
315964: RNCC: 3 | RNVC: 2
ZB0315964: RNCC: 5 | RNVC: 2

2 Aug 2013

3040-01-620-5743
Helical-Spur Gearshaft

016205743
185-5576: RNCC: 3 | RNVC: 2

31 Jul 2013

3040-01-620-5570
Rigid Connecting Link

016205570
3922AS168-8: RNCC: 1 | RNVC: 2
3922AS168-8: RNCC: 3 | RNVC: 2

30 Jul 2013

3040-01-620-5549
Rigid Connecting Link

016205549
3922AS168-12: RNCC: 3 | RNVC: 2

30 Jul 2013

3040-01-620-4688
Bell Crank

016204688
351248: RNCC: 3 | RNVC: 2
351248: RNCC: 5 | RNVC: 2
ZB0351248: RNCC: 5 | RNVC: 2

25 Jul 2013

3040-01-620-4641
Shaft Collar

016204641
3922AS168-9: RNCC: 3 | RNVC: 2
3922AS168: RNCC: D | RNVC: 9

24 Jul 2013

3040-01-620-4335
Rigid Connecting Link

016204335
3922AS168-2: RNCC: 3 | RNVC: 2
3922AS168: RNCC: D | RNVC: 9

23 Jul 2013

3040-01-620-4211
Nonrotating Shaft Eye Bracket

016204211
CG0034DB: RNCC: 3 | RNVC: 2
3922AS168-13: RNCC: 5 | RNVC: 9

23 Jul 2013

3040-01-620-4090
Linear Actuating Cylinder Assembly

016204090
218-370: RNCC: 3 | RNVC: 2

23 Jul 2013

3040-01-620-3760
Shouldered Shaft Assembly

016203760
449-030-112-103: RNCC: 3 | RNVC: 2

20 Jul 2013

3040-01-620-3214
Worm Shaft

016203214
2068556PC16: RNCC: 3 | RNVC: 2

17 Jul 2013

3040-01-620-0612
Mechanical Drive Housing

016200612
JEG2830-5: RNCC: 3 | RNVC: 1

28 Jun 2013

3040-01-620-0239
Shouldered Shaft

016200239
ICI0951403: RNCC: 3 | RNVC: 9
ICI0951403: RNCC: C | RNVC: 1

26 Jun 2013

3040-01-620-0070
Shouldered Shaft

016200070
ICI0951407: RNCC: 3 | RNVC: 9
ICI0951407: RNCC: C | RNVC: 1

26 Jun 2013

3040-01-620-0048
Rigid Connecting Link

016200048
3922AS168-11: RNCC: 3 | RNVC: 2

26 Jun 2013

3040-01-619-8814
Rigid Connecting Link

016198814
109415: RNCC: 3 | RNVC: 2

21 Jun 2013

3040-01-619-8691
Straight Shaft

016198691
203206: RNCC: 3 | RNVC: 2

20 Jun 2013

3040-01-619-8487
Shouldered Shaft

016198487
109388: RNCC: 3 | RNVC: 2

20 Jun 2013

3040-01-619-7880
Straight Shaft

016197880
13032514: RNCC: 3 | RNVC: 2

18 Jun 2013

3040-01-619-7684
Shouldered Shaft

016197684
109290: RNCC: 3 | RNVC: 2

17 Jun 2013

3040-01-619-7103
Linear Actuating Cylinder Piston

016197103
5-15-30820: RNCC: 3 | RNVC: 2

13 Jun 2013

3040-01-619-6990
Vehicular Operation Panel Housing

016196990
6040005ID: RNCC: 3 | RNVC: 2

13 Jun 2013

3040-01-619-5900
Mechanical Drive Housing

016195900
16102594-011: RNCC: 3 | RNVC: 2
16102594: RNCC: D | RNVC: 9

7 Jun 2013

3040-01-619-5708
Control Cam

016195708
440G-A07269: RNCC: 3 | RNVC: 2
F110038-2: RNCC: 5 | RNVC: 2
F118633 ITEM NO.8: RNCC: 5 | RNVC: 2

6 Jun 2013

3040-01-619-5607
Straight Axle

016195607
3238407-1: RNCC: 3 | RNVC: 2
3238407-1: RNCC: 5 | RNVC: 2

6 Jun 2013

3040-01-619-5152
Straight Shaft

016195152
6057437-702: RNCC: 3 | RNVC: 2
6057437-702: RNCC: 3 | RNVC: 9
6062234ITEM14: RNCC: 5 | RNVC: 2
6057177ITEM13: RNCC: 5 | RNVC: 2
6062234ITEM14: RNCC: 5 | RNVC: 9
6057177ITEM13: RNCC: 5 | RNVC: 9

4 Jun 2013

3040-01-619-5075
Straight Shaft

016195075
6061756-702: RNCC: 3 | RNVC: 2
6061756-702: RNCC: 3 | RNVC: 9
6052834ITEM49: RNCC: 5 | RNVC: 2
6062234ITEM36: RNCC: 5 | RNVC: 2
6061756-702: RNCC: 5 | RNVC: 2
6062234ITEM36: RNCC: 5 | RNVC: 9
6052834ITEM49: RNCC: 5 | RNVC: 9

4 Jun 2013

3040-01-619-5071
Straight Shaft

016195071
6061758-702: RNCC: 3 | RNVC: 2
6061758-702: RNCC: 3 | RNVC: 9
6062234ITEM47: RNCC: 5 | RNVC: 2
6061758-702: RNCC: 5 | RNVC: 2
6052834ITEM20: RNCC: 5 | RNVC: 2
6052834ITEM20: RNCC: 5 | RNVC: 9
6062234ITEM47: RNCC: 5 | RNVC: 9

4 Jun 2013

3040-01-619-5006
Planetary Gears Carrier

016195006
10650767: RNCC: 3 | RNVC: 2

4 Jun 2013

3040-01-619-4637
Shouldered Shaft

016194637
2000AS751-2: RNCC: 3 | RNVC: 2

3 Jun 2013

3040-01-619-4202
Linear Actuating Cylinder Assembly

016194202
100KT0037: RNCC: 3 | RNVC: 9
MP-0007856T: RNCC: 5 | RNVC: 2
100KT0037: RNCC: 5 | RNVC: 9

30 May 2013

3040-01-619-2653
Differential Spider

016192653
9312006: RNCC: 3 | RNVC: 1
8084884: RNCC: 5 | RNVC: 1

23 May 2013

3040-01-619-2638
Shaft Collar

016192638
5075B58-ITEM1: RNCC: 3 | RNVC: 1
2267F84-ITEM4: RNCC: 5 | RNVC: 1

23 May 2013

3040-01-619-1953
Shouldered Axle

016191953
415236: RNCC: 3 | RNVC: 2
415200: RNCC: D | RNVC: 9

21 May 2013

3040-01-619-1899
Straight Shaft

016191899
2000AS751-1: RNCC: 3 | RNVC: 2

21 May 2013

3040-01-619-1897
Shouldered Shaft

016191897
2027886: RNCC: 3 | RNVC: 2
2027880: RNCC: D | RNVC: 9

21 May 2013

3040-01-619-1569
Mechanical Drive Housing

016191569
17QS05H56: RNCC: 3 | RNVC: 2
17QS05H56: RNCC: 5 | RNVC: 2
F111083 ITEM NO 3: RNCC: 5 | RNVC: 2
F129803 ITEM NO 3: RNCC: 5 | RNVC: 2
F122828: RNCC: 7 | RNVC: 2

20 May 2013

3040-01-619-0982
Linear Actuating Cylinder Cap

016190982
A3265767: RNCC: 3 | RNVC: 2

16 May 2013

3040-01-619-0980
Linear Actuating Cylinder Cap

016190980
A3265774: RNCC: 3 | RNVC: 2

16 May 2013

3040-01-619-0840
Worm Shaft

016190840
335125: RNCC: 3 | RNVC: 2

16 May 2013

3040-01-619-0324
Shouldered Axle

016190324
2074050: RNCC: 3 | RNVC: 2
2074050-D: RNCC: D | RNVC: 9

15 May 2013

3040-01-619-0143
Control Cam

016190143
752-7068477-126: RNCC: 3 | RNVC: 2
H832-1662-126: RNCC: 5 | RNVC: 2

14 May 2013

3040-01-618-9880
Mechanical Drive Housing

016189880
2027841: RNCC: 3 | RNVC: 2
2027840: RNCC: D | RNVC: 9

13 May 2013

3040-01-618-9873
Mechanical Drive Housing

016189873
2027851: RNCC: 3 | RNVC: 2
2027840: RNCC: D | RNVC: 9

13 May 2013

3040-01-618-9775
Straight Shaft

016189775
000.001.449.908: RNCC: 3 | RNVC: 2
000.001.449.908: RNCC: 5 | RNVC: 2

13 May 2013

3040-01-618-9771
Shouldered Shaft

016189771
262546: RNCC: 3 | RNVC: 2
262450: RNCC: D | RNVC: 9

13 May 2013

3040-01-618-9741
Mechanical Drive Housing

016189741
10666651-011: RNCC: 3 | RNVC: 2
10666651: RNCC: D | RNVC: 9

13 May 2013

3040-01-618-9694
Linear Actuating Cylinder Piston Rod

016189694
234236: RNCC: 3 | RNVC: 2

13 May 2013

3040-01-618-9490
Straight Shaft

016189490
09018B2105: RNCC: 3 | RNVC: 2

10 May 2013

3040-01-618-8980
Rigid Connecting Link

016188980
691C651G01: RNCC: 3 | RNVC: 2

9 May 2013

3040-01-618-8613
Straight Axle

016188613
2097630: RNCC: 3 | RNVC: 2

8 May 2013

3040-01-618-8364
Linear Actuating Cylinder Assembly

016188364
257356: RNCC: 3 | RNVC: 2
257356-P: RNCC: D | RNVC: 9

8 May 2013

3040-01-618-8340
Linear Actuating Cylinder Piston Rod

016188340
257666: RNCC: 3 | RNVC: 2

8 May 2013

3040-01-618-8192
Flexible Drive Shaft

016188192
5 348 665 019: RNCC: 3 | RNVC: 2

7 May 2013

3040-01-618-8138
Control Cam

016188138
5364800026: RNCC: 3 | RNVC: 2

7 May 2013

3040-01-618-8078
Straight Shaft

016188078
000.001.449.864: RNCC: 3 | RNVC: 2
000.001.449.864: RNCC: 5 | RNVC: 2

7 May 2013

3040-01-618-8028
Straight Shaft

016188028
000.000.676.797: RNCC: 3 | RNVC: 2
000.000.676.797: RNCC: 5 | RNVC: 2

7 May 2013

3040-01-618-7932
Straight Shaft

016187932
000.000.666.516: RNCC: 3 | RNVC: 2
000.000.666.516: RNCC: 5 | RNVC: 2

6 May 2013

3040-01-618-7877
Shaft Idler

016187877
HCF723: RNCC: 3 | RNVC: 2

6 May 2013

3040-01-618-7804
Grease Cap

016187804
GC1980-01: RNCC: 3 | RNVC: 2

6 May 2013

3040-01-618-7797
Hub Clamp

016187797
HCH65253X: RNCC: 3 | RNVC: 2

6 May 2013

3040-01-618-7522
Straight Shaft

016187522
HP577: RNCC: 3 | RNVC: 2

3 May 2013

3040-01-618-7504
Hub Clamp

016187504
HP282A: RNCC: 3 | RNVC: 2

3 May 2013

3040-01-618-7491
Linear Actuating Cylinder Assembly

016187491
1756225: RNCC: 3 | RNVC: 2

3 May 2013

3040-01-618-7493
Linear Actuating Cylinder Piston Rod

016187493
200976: RNCC: 3 | RNVC: 2
200900: RNCC: D | RNVC: 9

3 May 2013

3040-01-618-7479
Piston Ring

016187479
0634-402-118: RNCC: 3 | RNVC: 9
0634-402-118: RNCC: 5 | RNVC: 9

3 May 2013

3040-01-618-7461
Rigid Connecting Link

016187461
2096530: RNCC: 3 | RNVC: 2
2096530-D: RNCC: D | RNVC: 9

3 May 2013

3040-01-618-7463
Linear Actuating Cylinder Assembly

016187463
HCH6323: RNCC: 3 | RNVC: 2

3 May 2013

3040-01-618-7436
Straight Shaft

016187436
5700-000-11-01: RNCC: 3 | RNVC: 2

3 May 2013

3040-01-618-7332
Friction Lining Material

016187332
200760: RNCC: 3 | RNVC: 2
200760-D: RNCC: D | RNVC: 9

3 May 2013

3040-01-618-7330
Linear Actuating Cylinder Assembly

016187330
2019036: RNCC: 3 | RNVC: 2
2019036-D: RNCC: D | RNVC: 9

3 May 2013

3040-01-618-7287
Nonrotating Shaft Eye Bracket

016187287
7579006-031: RNCC: 3 | RNVC: 2

3 May 2013

3040-01-618-7044
Linear Actuating Cylinder Piston Rod

016187044
416116: RNCC: 3 | RNVC: 2
416100: RNCC: D | RNVC: 9

2 May 2013

3040-01-618-7048
Linear Actuating Cylinder Piston

016187048
415790: RNCC: 3 | RNVC: 2
415790-D: RNCC: D | RNVC: 9

2 May 2013

3040-01-618-7047
Linear Actuating Cylinder Assembly

016187047
200750: RNCC: 3 | RNVC: 2
200750-D: RNCC: D | RNVC: 9

2 May 2013

3040-01-618-7003
Brake Disc

016187003
1-056-914-00-001: RNCC: 3 | RNVC: 2
10D1012-38: RNCC: 5 | RNVC: 2

2 May 2013

3040-01-618-6598
Shouldered Shaft

016186598
2078046: RNCC: 3 | RNVC: 2
2078040: RNCC: D | RNVC: 9

1 May 2013

3040-01-618-6556
Straight Axle

016186556
2097146: RNCC: 3 | RNVC: 2
2097140: RNCC: D | RNVC: 9

1 May 2013

3040-01-618-6564
Linear Actuating Cylinder Assembly

016186564
234296: RNCC: 3 | RNVC: 2

1 May 2013

3040-01-618-6561
Linear Actuating Cylinder Piston

016186561
234234: RNCC: 3 | RNVC: 2
234230: RNCC: D | RNVC: 9

1 May 2013

3040-01-618-6558
Straight Axle

016186558
2074156: RNCC: 3 | RNVC: 2
2074150: RNCC: D | RNVC: 9

1 May 2013

3040-01-618-6555
Linear Actuating Cylinder Assembly

016186555
234288: RNCC: 3 | RNVC: 2

1 May 2013

3040-01-618-6445
Linear Actuating Cylinder Piston

016186445
257960: RNCC: 3 | RNVC: 2
257960-D: RNCC: D | RNVC: 9

30 Apr 2013

3040-01-618-6448
Linear Actuating Cylinder Piston Rod

016186448
257676: RNCC: 3 | RNVC: 2
257600: RNCC: D | RNVC: 9

30 Apr 2013

3040-01-618-6330
Bell Crank

016186330
411706: RNCC: 3 | RNVC: 2
411700: RNCC: D | RNVC: 9

30 Apr 2013

3040-01-618-6260
Rigid Connecting Link

016186260
4F59384-103A: RNCC: 3 | RNVC: 2

30 Apr 2013

3040-01-618-5814
Straight Shaft

016185814
435420: RNCC: 3 | RNVC: 2

29 Apr 2013

3040-01-618-5716
Mechanical Drive Housing

016185716
6051339-702: RNCC: 3 | RNVC: 9
6057176-005: RNCC: 5 | RNVC: 1
651447-006-X: RNCC: 5 | RNVC: 1
C651447006X0GJ: RNCC: 5 | RNVC: 1

29 Apr 2013

3040-01-618-5708
Shouldered Axle

016185708
415226: RNCC: 3 | RNVC: 2

29 Apr 2013

3040-01-618-5282
Spur Gearshaft

016185282
131J658-ITEM19: RNCC: 3 | RNVC: 1
131J654 ITEM 38: RNCC: 5 | RNVC: 1
131J658-37: RNCC: 5 | RNVC: 1

26 Apr 2013

3040-01-618-5273
Spur Gearshaft

016185273
131J658-ITEM20: RNCC: 3 | RNVC: 1
131J654 ITEM 39: RNCC: 5 | RNVC: 1
131J658-39: RNCC: 5 | RNVC: 1

26 Apr 2013

3040-01-618-5267
Spur Gearshaft

016185267
131J652-ITEM2: RNCC: 3 | RNVC: 1
131J652-3: RNCC: 5 | RNVC: 1
131J654 ITEM 70: RNCC: 5 | RNVC: 1

26 Apr 2013

3040-01-618-4799
Control Cam

016184799
8347787: RNCC: 3 | RNVC: 2

25 Apr 2013

3040-01-618-4724
Multiple Gears Gearshaft

016184724
3311-199-040: RNCC: 3 | RNVC: 2

24 Apr 2013

3040-01-618-3713
Piston Ring

016183713
0634-402-175: RNCC: 3 | RNVC: 2
0634-402-175: RNCC: 5 | RNVC: 9

22 Apr 2013

3040-01-618-3010
Shouldered Shaft

016183010
432116: RNCC: 3 | RNVC: 2

19 Apr 2013

3040-01-618-2930
Rigid Connecting Link

016182930
2022526: RNCC: 3 | RNVC: 2
2022520: RNCC: D | RNVC: 9

18 Apr 2013

3040-01-618-2879
Nonaircraft Mechanical Actuator

016182879
431706: RNCC: 3 | RNVC: 2
431706-D: RNCC: D | RNVC: 9

18 Apr 2013

3040-01-618-2467
Drive Shaft Adapter

016182467
7512E11-ITEM5: RNCC: 3 | RNVC: 1

17 Apr 2013

3040-01-618-2462
Drive Shaft Adptr

016182462
7512E11-ITEM4: RNCC: 3 | RNVC: 1

17 Apr 2013

3040-01-618-2374
Shaft Adapter

016182374
5945D23-ITEM4: RNCC: 3 | RNVC: 1

17 Apr 2013

3040-01-618-2204
Shouldered Shaft

016182204
800788: RNCC: 1 | RNVC: 2
300823: RNCC: 3 | RNVC: 2

17 Apr 2013

3040-01-618-1884
Extension Shaft

016181884
7512E09-ITEM12: RNCC: 3 | RNVC: 1

16 Apr 2013

3040-01-618-1758
Bell Crank Support

016181758
9365M10P02: RNCC: 3 | RNVC: 2

15 Apr 2013

3040-01-618-0539
Housing Adapter

016180539
1004552: RNCC: 3 | RNVC: 2

11 Apr 2013

3040-01-618-0028
Shouldered Shaft

016180028
3786972: RNCC: 3 | RNVC: 2
3786972: RNCC: 5 | RNVC: 9

10 Apr 2013

3040-01-618-0006
Linear Actuating Cylinder Assembly

016180006
458/80031: RNCC: 3 | RNVC: 2

10 Apr 2013

3040-01-617-7932
Control Cam

016177932
XSLA0031: RNCC: 3 | RNVC: 2

3 Apr 2013

3040-01-617-7494
Piston Ring

016177494
721036A: RNCC: 3 | RNVC: 2

2 Apr 2013

3040-01-617-7370
Piston Ring

016177370
721079A: RNCC: 3 | RNVC: 2

2 Apr 2013

3040-01-617-7225
Control Cable Assembly

016177225
ITEM NO. 411.1: RNCC: 3 | RNVC: 9

2 Apr 2013

3040-01-617-7223
Pivot Shaft Assembly

016177223
ITEM NO. 311.1: RNCC: 3 | RNVC: 9

2 Apr 2013

3040-01-617-6943
Linear Actuating Cylinder Assembly

016176943
80950: RNCC: 3 | RNVC: 9

1 Apr 2013

3040-01-617-6749
Shouldered Shaft

016176749
564-7384485-3: RNCC: 3 | RNVC: 2
36-37-7840C: RNCC: 5 | RNVC: 2
B525-8200: RNCC: D | RNVC: 9

29 Mar 2013

3040-01-617-6686
Cylinder Support

016176686
601.1: RNCC: 3 | RNVC: 9

29 Mar 2013

3040-01-617-6644
Body Hub

016176644
803-7525143-XX-34: RNCC: 3 | RNVC: 2

29 Mar 2013

3040-01-617-6320
Ball Joint

016176320
520021201: RNCC: 3 | RNVC: 2
520021201: RNCC: 3 | RNVC: 9

28 Mar 2013

3040-01-617-6321
Remote Control Lever

016176321
2ABR12034: RNCC: 3 | RNVC: 2
2ABR12034: RNCC: 3 | RNVC: 9

28 Mar 2013

3040-01-617-6186
Piston Ring

016176186
721104A: RNCC: 3 | RNVC: 2

28 Mar 2013

3040-01-617-6091
Tension Spring Assembly

016176091
J15662233-3: RNCC: 3 | RNVC: 2

27 Mar 2013

3040-01-617-6024
Piston Ring

016176024
721000A: RNCC: 3 | RNVC: 2

27 Mar 2013

3040-01-617-3196
Housing Adapter

016173196
204405-10: RNCC: 3 | RNVC: 2
204405-10: RNCC: 3 | RNVC: 2

19 Mar 2013

3040-01-617-3193
Housing Adapter

016173193
202333-10: RNCC: 3 | RNVC: 2
202333-10: RNCC: 3 | RNVC: 2

19 Mar 2013

3040-01-617-2670
Rigid Connecting Link

016172670
13669452: RNCC: 3 | RNVC: 2

18 Mar 2013

3040-01-617-2664
Rigid Connecting Link

016172664
13669453: RNCC: 3 | RNVC: 2

18 Mar 2013

3040-01-617-1891
Linear Actuating Cylinder

016171891
SSADA2P10: RNCC: 3 | RNVC: 2

14 Mar 2013

3040-01-617-1833
Linear Actuating Cylinder Assembly

016171833
CRC-2520: RNCC: 3 | RNVC: 2
CRC-2520: RNCC: 5 | RNVC: 9
F143308: RNCC: D | RNVC: 9

14 Mar 2013

3040-01-617-1585
Linear Actuating Cylinder Assembly

016171585
99 003: RNCC: 3 | RNVC: 2
99 003: RNCC: 5 | RNVC: 2

13 Mar 2013

3040-01-617-1390
Push-Pull Control Assembly

016171390
218084551: RNCC: 3 | RNVC: 2
564-7384485-36: RNCC: 5 | RNVC: 2
564-7384485: RNCC: D | RNVC: 9

13 Mar 2013

3040-01-617-1389
Shouldered Shaft

016171389
ZX11188635: RNCC: 3 | RNVC: 9
10134447-DWK REV 03 MARK 4001-3: RNCC: 5 | RNVC: 9

13 Mar 2013

3040-01-617-1368
Control Cable Assembly

016171368
564-7384485-37: RNCC: 3 | RNVC: 2
B525-8200-37: RNCC: 5 | RNVC: 2

12 Mar 2013

3040-01-617-1303
Linear Actuating Cylinder Assembly

016171303
30929565: RNCC: 3 | RNVC: 2

12 Mar 2013

3040-01-617-1284
Piston Rod Guide

016171284
5364800029: RNCC: 3 | RNVC: 2
5364800029: RNCC: 5 | RNVC: 2

12 Mar 2013

3040-01-617-1268
Pneumatic Rotor

016171268
5364800028: RNCC: 3 | RNVC: 2

12 Mar 2013

3040-01-617-0800
Shouldered Shaft

016170800
KV15780: RNCC: 3 | RNVC: 2
KV15780: RNCC: 3 | RNVC: 9

11 Mar 2013

3040-01-617-0742
Shouldered Shaft

016170742
104680: RNCC: 3 | RNVC: 2

8 Mar 2013

3040-01-617-0670
Rotary Actuating Cylinder Assembly

016170670
SL5A2H80/80EOA: RNCC: 3 | RNVC: 2
6800 236102: RNCC: 5 | RNVC: 2
6800 236102: RNCC: 5 | RNVC: 2

8 Mar 2013

3040-01-617-0556
Flexible Drive Shaft

016170556
BH037-22: RNCC: 3 | RNVC: 2

8 Mar 2013

3040-01-617-0383
Linear Actuating Cylinder Assembly

016170383
30904724: RNCC: 3 | RNVC: 2

7 Mar 2013

3040-01-617-0008
Hydraulic Accumulator Bladder

016170008
813712: RNCC: 3 | RNVC: 2

6 Mar 2013

3040-01-616-9951
Shaft Collar

016169951
3537423: RNCC: 3 | RNVC: 2
3537423: RNCC: 5 | RNVC: 9

6 Mar 2013

3040-01-616-9915
Linear Actuating Cylinder Assembly

016169915
HCF11323: RNCC: 3 | RNVC: 2

6 Mar 2013

3040-01-616-9168
Linear Actuating Cylinder

016169168
SSADA2S10: RNCC: 3 | RNVC: 2

4 Mar 2013

3040-01-616-9139
Rigid Connecting Link

016169139
011019-101: RNCC: 3 | RNVC: 2
2226660: RNCC: 5 | RNVC: 9
2226660: RNCC: 7 | RNVC: 2

4 Mar 2013

3040-01-616-7722
Planetary Gears Carrier

016167722
196987: RNCC: 3 | RNVC: 2
20961D001: RNCC: D | RNVC: 9

27 Feb 2013

3040-01-616-6489
Mechanical Drive Housing

016166489
00524-0224-0001: RNCC: 3 | RNVC: 2

22 Feb 2013

3040-01-616-5316
Control Cam

016165316
3037-349: RNCC: 3 | RNVC: 2

19 Feb 2013

3040-01-616-4997
Rotor Restraint

016164997
4D09983-001: RNCC: 3 | RNVC: 2

15 Feb 2013

3040-01-616-4783
Rigid Connecting Link

016164783
2099-726: RNCC: 3 | RNVC: 2
2099-726: RNCC: 3 | RNVC: 9

15 Feb 2013

3040-01-616-4275
Shouldered Shaft

016164275
F088751: RNCC: 3 | RNVC: 2
F086463 ITEM NO 3: RNCC: 5 | RNVC: 2

13 Feb 2013

3040-01-616-3346
Shouldered Shaft

016163346
8077938: RNCC: 3 | RNVC: 1

11 Feb 2013

3040-01-616-3179
Pneumatic Actuator Cylinder Housing

016163179
TE551A: RNCC: 3 | RNVC: 2
TE551A: RNCC: 5 | RNVC: 2

8 Feb 2013

3040-01-616-2995
Spur Gearshaft

016162995
800757: RNCC: 1 | RNVC: 2
300816: RNCC: 3 | RNVC: 2

8 Feb 2013

3040-01-616-2205
Tie Rod Nrp

016162205
D-50642: RNCC: 3 | RNVC: 9

6 Feb 2013

3040-01-616-2017
Shouldered Shaft

016162017
F088761: RNCC: 3 | RNVC: 2
F08643 ITEM NO 4: RNCC: 5 | RNVC: 2

5 Feb 2013

3040-01-616-2013
Rigid Connecting Link

016162013
8936440: RNCC: 3 | RNVC: 2

5 Feb 2013

3040-01-616-2007
Rigid Connecting Link

016162007
8936440-01: RNCC: 3 | RNVC: 2

5 Feb 2013

3040-01-616-1310
Shouldered Shaft

016161310
F088721: RNCC: 3 | RNVC: 2
F0856463: RNCC: 5 | RNVC: 9

4 Feb 2013

3040-01-616-1224
Shaft Collar

016161224
JCX91449: RNCC: 3 | RNVC: 2

1 Feb 2013

3040-01-616-1222
Mechanical Drive Housing Part

016161222
JCX91433: RNCC: 3 | RNVC: 2

1 Feb 2013

3040-01-616-1136
Transmission Range Clutch Hub

016161136
JCX91425: RNCC: 3 | RNVC: 2

1 Feb 2013

3040-01-616-0994
Brake Disc

016160994
800760: RNCC: 1 | RNVC: 2
300818: RNCC: 3 | RNVC: 2

1 Feb 2013

3040-01-616-0954
Straight Shaft

016160954
F089301: RNCC: 3 | RNVC: 2
F089013 ITEM NO 9: RNCC: 5 | RNVC: 2
F089013: RNCC: D | RNVC: 9

31 Jan 2013

3040-01-616-0892
Shouldered Shaft

016160892
2301721W: RNCC: 3 | RNVC: 2

31 Jan 2013

3040-01-616-0730
Control Cam

016160730
F089601: RNCC: 3 | RNVC: 2
F089013 ITEM NO 28: RNCC: 5 | RNVC: 2

31 Jan 2013

3040-01-615-9799
Straight Shaft

016159799
800848: RNCC: 3 | RNVC: 2
303814: RNCC: 7 | RNVC: 2

29 Jan 2013

3040-01-615-9368
Straight Shaft

016159368
800851: RNCC: 3 | RNVC: 2
303816: RNCC: 7 | RNVC: 2

28 Jan 2013

3040-01-615-8835
Adapter Straight

016158835
SS-8-TA-7-4: RNCC: 3 | RNVC: 1

25 Jan 2013

3040-01-615-8692
Straight Shaft

016158692
800849: RNCC: 1 | RNVC: 2
303815: RNCC: 3 | RNVC: 2

25 Jan 2013

3040-01-615-7408
Shouldered Shaft

016157408
2ACA12011: RNCC: 3 | RNVC: 2
2ACA12011: RNCC: 3 | RNVC: 9

22 Jan 2013

3040-01-615-6412
Pivot Shaft Assembly

016156412
100158: RNCC: 3 | RNVC: 2

17 Jan 2013

3040-01-615-6222
Transfer Drive Clutch Shaft

016156222
F086291: RNCC: 3 | RNVC: 2
F087983 ITEM N0 1: RNCC: 5 | RNVC: 2

17 Jan 2013

3040-01-615-6117
Shouldered Shaft Assembly

016156117
C153F005: RNCC: 3 | RNVC: 2

17 Jan 2013

3040-01-615-4553
Linear Actuating Cylinder Assembly

016154553
286-200: RNCC: 3 | RNVC: 2
120870 INDEX #5: RNCC: 5 | RNVC: 2
286-200: RNCC: 5 | RNVC: 2

11 Jan 2013

3040-01-615-3561
Rigid Connecting Link

016153561
800954: RNCC: 3 | RNVC: 2

9 Jan 2013

3040-01-615-3376
Shaft Collar

016153376
6C040-82860: RNCC: 3 | RNVC: 2
15531-6414-0: RNCC: 5 | RNVC: 9

9 Jan 2013

3040-01-615-3288
Counterbalance Weight

016153288
13092293: RNCC: 3 | RNVC: 2

9 Jan 2013

3040-01-615-3227
Straight Shaft

016153227
B70030: RNCC: 3 | RNVC: 2
210-0-016 REV - ITEM NO.5: RNCC: 5 | RNVC: 2

9 Jan 2013

3040-01-615-3204
Rigid Connecting Link

016153204
888987T05: RNCC: 3 | RNVC: 2

9 Jan 2013

3040-01-615-3184
Nonaircraft Mechanical Actuator

016153184
BRP7784: RNCC: 3 | RNVC: 2

9 Jan 2013

3040-01-615-2799
Nonrotating Shaft Eye Bracket

016152799
03011H2131-01: RNCC: 3 | RNVC: 2

8 Jan 2013

3040-01-615-2598
Nonaircraft Mechanical Actuator

016152598
7D3-05257-1: RNCC: 3 | RNVC: 2
F082645 REV C IT.NO.17: RNCC: 5 | RNVC: 2

7 Jan 2013

3040-01-615-2259
Rigid Connecting Link

016152259
167-7563785 PC 188: RNCC: 3 | RNVC: 2

4 Jan 2013

3040-01-615-2254
Rigid Connecting Link

016152254
167-7563785 PC 186: RNCC: 3 | RNVC: 2

4 Jan 2013

3040-01-615-1914
Mechanical Drive Housing

016151914
BA22981: RNCC: 3 | RNVC: 2

3 Jan 2013

3040-01-615-1540
Static Wick Fitting

016151540
7-5R2430105-001: RNCC: 3 | RNVC: 2

2 Jan 2013

3040-01-615-1288
Shouldered Shaft

016151288
C153F006: RNCC: 3 | RNVC: 2
107887: RNCC: 5 | RNVC: 2

31 Dec 2012

3040-01-615-1077
Centrifuga Breather

016151077
A1-4G-60 FIG 02: RNCC: 3 | RNVC: 2

28 Dec 2012

3040-01-615-0381
Pivot Shaft Assembly

016150381
100712: RNCC: 3 | RNVC: 2

21 Dec 2012

3040-01-614-9101
Actuating Cylinder

016149101
622260-4R: RNCC: 3 | RNVC: 2

18 Dec 2012

3040-01-614-9080
Rigid Connecting Link

016149080
IM-LHA6-1588-474T: RNCC: 3 | RNVC: 2

18 Dec 2012

3040-01-614-8687
5 Inch U-Cup

016148687
26-3685: RNCC: 3 | RNVC: 2

17 Dec 2012

3040-01-614-8309
Extension Shaft

016148309
60-4455-3: RNCC: 3 | RNVC: 2

17 Dec 2012

3040-01-614-7714
Linear Actuating Cylinder Assembly

016147714
40668-1: RNCC: 3 | RNVC: 2
40668: RNCC: D | RNVC: 9

14 Dec 2012

3040-01-614-7186
6 Inch U-Cup

016147186
26-3686: RNCC: 3 | RNVC: 2

13 Dec 2012

3040-01-614-6996
Body Hub

016146996
12522480: RNCC: 3 | RNVC: 2

12 Dec 2012

3040-01-614-6710
Straight Shaft

016146710
710077-10: RNCC: 3 | RNVC: 2
G-10/FR 4: RNCC: 5 | RNVC: 9
710077-1 FIND # 10: RNCC: 5 | RNVC: 9

12 Dec 2012

3040-01-614-6280
Rigid Connecting Link

016146280
IM-LHA6-1588-474: RNCC: 3 | RNVC: 2

11 Dec 2012

3040-01-614-6204
Rigid Connecting Link

016146204
P40740: RNCC: 3 | RNVC: 2

10 Dec 2012

3040-01-614-6196
Rigid Connecting Link

016146196
P42170-1: RNCC: 3 | RNVC: 2

10 Dec 2012

3040-01-614-5963
Hydraulic Accumulator

016145963
A4N0231BD530K: RNCC: 3 | RNVC: 2
632975: RNCC: 5 | RNVC: 2
08-8041 HYDR INDEX #17: RNCC: 5 | RNVC: 2

10 Dec 2012

3040-01-614-4759
Rotating Shaft Eye Bracket

016144759
140-20340: RNCC: 3 | RNVC: 2

5 Dec 2012

3040-01-614-4512
Multiple Disk Brake

016144512
86664: RNCC: 3 | RNVC: 2
08-8041 INDEX NO 31: RNCC: 5 | RNVC: 2

4 Dec 2012

3040-01-614-3739
Linear Actuating Cylinder

016143739
622260-4L: RNCC: 3 | RNVC: 2
622260-AL: RNCC: 3 | RNVC: 9
622260-4L: RNCC: 5 | RNVC: 2

3 Dec 2012

3040-01-614-3390
Straight Shaft

016143390
6549-1005-03: RNCC: 3 | RNVC: 2

30 Nov 2012

3040-01-614-3174
Manual Control Lever

016143174
7C6201: RNCC: 3 | RNVC: 2

30 Nov 2012

3040-01-614-3095
Prop Shaft Assy Nrp

016143095
BD243004-A0002: RNCC: 3 | RNVC: 2
243-8294612-A0002: RNCC: 5 | RNVC: 2
BD243004-A0002: RNCC: 5 | RNVC: 2

29 Nov 2012

3040-01-614-3096
Prop Shaft Assy Nrp

016143096
BD243004-A0010: RNCC: 3 | RNVC: 2
243-8294612-A0010: RNCC: 5 | RNVC: 2
BD243004-A0010: RNCC: 5 | RNVC: 2

29 Nov 2012

3040-01-614-0754
Mechanical Drive Housing

016140754
T279466: RNCC: 3 | RNVC: 2

26 Nov 2012

3040-01-614-0738
Mechanical Drive Housing

016140738
T239901: RNCC: 3 | RNVC: 2

26 Nov 2012

3040-01-614-0718
Multiple Disk Brake

016140718
13-552-112: RNCC: 3 | RNVC: 2

26 Nov 2012

3040-01-614-0691
Mechanical Drive Housing

016140691
T279467: RNCC: 3 | RNVC: 2

26 Nov 2012

3040-01-614-0569
Bevel Gearshaft

016140569
26006-207: RNCC: 3 | RNVC: 2

26 Nov 2012

3040-01-614-0568
Mechanical Drive Housing

016140568
26200-02: RNCC: 3 | RNVC: 2

26 Nov 2012

3040-01-614-0522
Rigid Connecting Link

016140522
12564816: RNCC: 3 | RNVC: 2

26 Nov 2012

3040-01-614-0300
Carrier Plate

016140300
820218: RNCC: 3 | RNVC: 2
901010-6-06-1 ITEM NO.28: RNCC: 5 | RNVC: 2

26 Nov 2012

3040-01-614-0250
Piston Rod Guide

016140250
6D61202-001: RNCC: 3 | RNVC: 2
7518E18 FIND NO 11: RNCC: D | RNVC: 9

23 Nov 2012

3040-01-614-0198
Shouldered Shaft

016140198
7518E19-001: RNCC: 3 | RNVC: 2

23 Nov 2012

3040-01-614-0196
Shouldered Shaft

016140196
7518E25-002: RNCC: 3 | RNVC: 2

23 Nov 2012

3040-01-614-0195
Shouldered Shaft

016140195
7518E19-002: RNCC: 3 | RNVC: 2

23 Nov 2012

3040-01-614-0105
Shouldered Shaft

016140105
31.03.12.017H: RNCC: 3 | RNVC: 2
310312017H: RNCC: 3 | RNVC: 9
31.03.12.017H: RNCC: 5 | RNVC: 9

23 Nov 2012

3040-01-614-0073
Flexible Shaft Assembly Core

016140073
TE5549R38GS: RNCC: 3 | RNVC: 2

21 Nov 2012

3040-01-614-0017
Shouldered Shaft

016140017
X8LC60122: RNCC: 3 | RNVC: 2

21 Nov 2012

3040-01-613-9988
Shouldered Shaft

016139988
417744-392-GG: RNCC: 3 | RNVC: 2
88436-A: RNCC: D | RNVC: 9

21 Nov 2012

3040-01-613-9930
Shouldered Shaft

016139930
7518E25-001: RNCC: 3 | RNVC: 2

21 Nov 2012

3040-01-613-9856
Linear Actuating Cylinder Assembly

016139856
31672: RNCC: 3 | RNVC: 2
WPM 8X1: RNCC: 5 | RNVC: 9

21 Nov 2012

3040-01-613-9799
Flexible Shaft Assembly Core

016139799
TE5549T52GSRH: RNCC: 3 | RNVC: 2

21 Nov 2012

3040-01-613-9766
Shouldered Shaft

016139766
TE5549H55LGS: RNCC: 3 | RNVC: 2

21 Nov 2012

3040-01-613-9726
Housing Adapter

016139726
BH274-21: RNCC: 3 | RNVC: 2

20 Nov 2012

3040-01-613-9474
Flexible Shaft Assembly Core

016139474
TE5549T45GS: RNCC: 3 | RNVC: 2

20 Nov 2012

3040-01-613-8449
Nonrotating Shaft Eye Bracket

016138449
TE5540: RNCC: 3 | RNVC: 2

20 Nov 2012

3040-01-613-8396
Linear Actuating Cylinder Piston Rod

016138396
13201-78201-71: RNCC: 3 | RNVC: 2

20 Nov 2012

3040-01-613-8292
Shaft Retaining Plate

016138292
RD55283: RNCC: 3 | RNVC: 2

19 Nov 2012

3040-01-613-8240
Hub Clamp

016138240
HP213: RNCC: 3 | RNVC: 2
HP213: RNCC: 5 | RNVC: 2

19 Nov 2012

3040-01-613-7959
Straight Shaft

016137959
TE5549R51LGS: RNCC: 3 | RNVC: 2

19 Nov 2012

3040-01-613-7802
Straight Shaft

016137802
TE5549H55RGS: RNCC: 3 | RNVC: 2

16 Nov 2012

3040-01-613-7796
Straight Shaft

016137796
TE5549W38GS: RNCC: 3 | RNVC: 2

16 Nov 2012

3040-01-613-7792
Linear Actuating Cylinder Assembly

016137792
42812-2: RNCC: 1 | RNVC: 2
R20010024CCDCZ: RNCC: 3 | RNVC: 2

16 Nov 2012

3040-01-613-7767
Rigid Connecting Link

016137767
ASV136556: RNCC: 3 | RNVC: 9

16 Nov 2012

3040-01-613-7653
Spur Gearshaft

016137653
TE0442HT: RNCC: 3 | RNVC: 2

16 Nov 2012

3040-01-613-7640
Straight Shaft

016137640
TE5549T40GS: RNCC: 3 | RNVC: 2

16 Nov 2012

3040-01-613-7647
Linear Actuating Cylinder Assembly

016137647
42812-1: RNCC: 1 | RNVC: 2
S30010020CCEZ: RNCC: 3 | RNVC: 2

16 Nov 2012

3040-01-613-7574
Shouldered Shaft

016137574
034-59109: RNCC: 3 | RNVC: 2

15 Nov 2012

3040-01-613-7388
Manual Control Lever

016137388
MTW016: RNCC: 3 | RNVC: 2

15 Nov 2012

3040-01-613-7381
Rigid Connecting Link

016137381
MTWH022: RNCC: 3 | RNVC: 2

15 Nov 2012

3040-01-613-7382
Rigid Connecting Link

016137382
MTWH012: RNCC: 3 | RNVC: 2

15 Nov 2012

3040-01-613-7365
Rigid Connecting Link

016137365
HO6700: RNCC: 3 | RNVC: 2

15 Nov 2012

3040-01-613-7191
Flexible Shaft Assembly Core

016137191
TE5549T38GS: RNCC: 3 | RNVC: 2

15 Nov 2012

3040-01-613-6329
Transfer Drive Clutch Shaft

016136329
24PE-07-12CH-PC-M06: RNCC: 3 | RNVC: 2

13 Nov 2012

3040-01-613-5904
Control Cam Assembly

016135904
CA112: RNCC: 3 | RNVC: 2
B21429 ITEM 13: RNCC: 5 | RNVC: 2

9 Nov 2012

3040-01-613-5543
Shouldered Shaft

016135543
N7440: RNCC: 3 | RNVC: 2

8 Nov 2012

3040-01-613-5530
Shouldered Shaft

016135530
357480: RNCC: 3 | RNVC: 2

8 Nov 2012

3040-01-613-5507
Shaft Collar

016135507
R0135021: RNCC: 3 | RNVC: 2
R0135021: RNCC: 5 | RNVC: 2
R0135021-0302: RNCC: D | RNVC: 9

8 Nov 2012

3040-01-613-5300
Piston Ring

016135300
29536859: RNCC: 3 | RNVC: 2

8 Nov 2012

3040-01-613-5292
Spur Gearshaft

016135292
26006-205: RNCC: 3 | RNVC: 2

8 Nov 2012

3040-01-613-4981
Straight Shaft

016134981
21281-1004-1: RNCC: 3 | RNVC: 2
21281 FIND NO 5: RNCC: 5 | RNVC: 1

8 Nov 2012

3040-01-613-4980
Rigid Connecting Link

016134980
CC-5023C-23C: RNCC: 3 | RNVC: 2
CC-5240, REV E, PC#10: RNCC: 5 | RNVC: 2

8 Nov 2012

3040-01-613-4960
Lever Fitting

016134960
5199-027-3 .50IN: RNCC: 3 | RNVC: 2

8 Nov 2012

3040-01-613-4351
Mechanical Drive Housing Part

016134351
11450133-1: RNCC: 3 | RNVC: 2
11450133: RNCC: D | RNVC: 9

7 Nov 2012

3040-01-613-3792
Rigid Connecting Link

016133792
2528673: RNCC: 3 | RNVC: 2

6 Nov 2012

3040-01-613-3640
Shouldered Shaft

016133640
RMH-17988-0: RNCC: 3 | RNVC: 2

6 Nov 2012

3040-01-613-2945
Transmission Fluid Cooler

016132945
H39-12 0RB-19CNZZ: RNCC: 3 | RNVC: 2

5 Nov 2012

3040-01-613-1839
Jack Shaft

016131839
6236E68-H02: RNCC: 3 | RNVC: 1
1532J97ITEM4: RNCC: 5 | RNVC: 1

1 Nov 2012

3040-01-613-1809
Housing Adapter

016131809
20015: RNCC: 3 | RNVC: 2

1 Nov 2012

3040-01-613-1612
Straight Shaft

016131612
272-6675: RNCC: 3 | RNVC: 2

31 Oct 2012

3040-01-613-1567
Cylinder

016131567
99R012732780: RNCC: 3 | RNVC: 2
R.123340 ITEM 20: RNCC: 5 | RNVC: 2

31 Oct 2012

3040-01-613-1493
Body Hub

016131493
11973: RNCC: 3 | RNVC: 2
L-20175-H-0110 ITEM 2: RNCC: 5 | RNVC: 2

31 Oct 2012

3040-01-613-1391
Friction Lining

016131391
62A1024: RNCC: 3 | RNVC: 2
67B1024: RNCC: 3 | RNVC: 9

31 Oct 2012

3040-01-613-1195
Push-Pull Control Assembly

016131195
423704-1: RNCC: 3 | RNVC: 2
423704: RNCC: D | RNVC: 9

30 Oct 2012

3040-01-613-0637
Friction Lining

016130637
62A854: RNCC: 3 | RNVC: 2
67B854: RNCC: 5 | RNVC: 9

29 Oct 2012

3040-01-613-0633
Friction Lining

016130633
62A853: RNCC: 3 | RNVC: 2
67B853: RNCC: 5 | RNVC: 9

29 Oct 2012

3040-01-613-0611
Friction Lining Material

016130611
62A334: RNCC: 3 | RNVC: 2
67B334: RNCC: 5 | RNVC: 9

29 Oct 2012

3040-01-613-0260
Friction Lining

016130260
62A1057: RNCC: 3 | RNVC: 2
67B1057: RNCC: 5 | RNVC: 9

29 Oct 2012

3040-01-613-0255
Linear Actuating Cylinder Assembly

016130255
131694B: RNCC: 3 | RNVC: 2
F083658: RNCC: 5 | RNVC: 2

29 Oct 2012

3040-01-613-0253
Friction Lining

016130253
62B829: RNCC: 3 | RNVC: 2
67B829: RNCC: 5 | RNVC: 9

29 Oct 2012

3040-01-613-0242
Friction Lining

016130242
62A335: RNCC: 3 | RNVC: 2
67B335: RNCC: 5 | RNVC: 9

29 Oct 2012

3040-01-613-0248
Friction Lining

016130248
67B830: RNCC: 3 | RNVC: 2

29 Oct 2012

3040-01-613-0238
Friction Lining

016130238
62A1026: RNCC: 3 | RNVC: 2
67B1026: RNCC: 5 | RNVC: 9

29 Oct 2012

3040-01-612-9899
Breather

016129899
018 858 00: RNCC: 3 | RNVC: 2

26 Oct 2012

3040-01-612-9880
Linear Actuating Cylinder Piston

016129880
99R01273268O: RNCC: 3 | RNVC: 2
R.123340 ITEM 19: RNCC: 5 | RNVC: 2

26 Oct 2012

3040-01-612-9659
Nonaircraft Mechanical Actuator

016129659
75-1342-S: RNCC: 3 | RNVC: 2
75-1342-S: RNCC: 3 | RNVC: 9

25 Oct 2012

3040-01-612-9541
Door Shaft Assy

016129541
5D09277-G01: RNCC: 3 | RNVC: 1
1532J46ITEM5: RNCC: 5 | RNVC: 1

25 Oct 2012

3040-01-612-9087
Breather

016129087
01654700: RNCC: 3 | RNVC: 2

24 Oct 2012

3040-01-612-9069
Pivot Shaft Assembly

016129069
057194-04-S: RNCC: 3 | RNVC: 2
057194: RNCC: D | RNVC: 9

24 Oct 2012

3040-01-612-8285
Shouldered Shaft

016128285
13581-78200-71: RNCC: 3 | RNVC: 2

22 Oct 2012

3040-01-612-8282
Shouldered Shaft

016128282
13582-78200-71: RNCC: 3 | RNVC: 2

22 Oct 2012

3040-01-612-8260
Mechanical Drive Housing Part

016128260
70163-1: RNCC: 3 | RNVC: 2

22 Oct 2012

3040-01-612-7474
Control Cam

016127474
99R01273238O: RNCC: 3 | RNVC: 2
R.123340 ITEM 14: RNCC: 5 | RNVC: 2

19 Oct 2012

3040-01-612-7407
Linear Actuating Cylinder Head

016127407
13211E3021: RNCC: 3 | RNVC: 2
13211E3021: RNCC: D | RNVC: 9

19 Oct 2012

3040-01-612-6992
Linear Actuating Cylinder

016126992
F085198: RNCC: 3 | RNVC: 2
F085013 IT 4: RNCC: 5 | RNVC: 2
CDT 18251: RNCC: 5 | RNVC: 9

18 Oct 2012

3040-01-612-4184
Straight Shaft

016124184
50095: RNCC: 3 | RNVC: 9

11 Oct 2012

3040-01-612-2992
Pneumatic Actuator Cylinder Housing

016122992
L-20175-H-0110 ITEM 10: RNCC: 3 | RNVC: 2

9 Oct 2012

3040-01-612-2204
Mechanical Drive Housing

016122204
DE-B-4134 REV C: RNCC: 3 | RNVC: 2

5 Oct 2012

3040-01-612-1415
Shouldered Shaft

016121415
180-22: RNCC: 3 | RNVC: 2

3 Oct 2012

3040-01-612-0911
Control Cam Assembly

016120911
LS1091282: RNCC: 3 | RNVC: 2

3 Oct 2012

3040-01-612-0856
Rigid Connecting Link

016120856
167-7563785 PC 53: RNCC: 3 | RNVC: 2

2 Oct 2012

3040-01-612-0800
Rigid Connecting Link

016120800
167-7563785 PC 61: RNCC: 3 | RNVC: 2

2 Oct 2012

3040-01-612-0723
Linear Actuating Cylinder Piston

016120723
5903-005660: RNCC: 3 | RNVC: 2

2 Oct 2012

3040-01-612-0483
Nonrotating Shaft Eye Bracket

016120483
181009-1: RNCC: 3 | RNVC: 2
1810091-1: RNCC: 5 | RNVC: 2
1810091: RNCC: 7 | RNVC: 2
MA-216100-001: RNCC: D | RNVC: 9

2 Oct 2012

3040-01-612-0319
Housing Adapter

016120319
7011120: RNCC: 3 | RNVC: 2

1 Oct 2012

3040-01-612-0114
Rigid Connecting Link

016120114
12519413: RNCC: 3 | RNVC: 2
12519413: RNCC: 5 | RNVC: 2
12519413: RNCC: D | RNVC: 9

1 Oct 2012

3040-01-611-9649
Rigid Connecting Link

016119649
167-7563785 PC60: RNCC: 3 | RNVC: 2

28 Sep 2012

3040-01-611-9656
Rigid Connecting Link

016119656
167-7563785 PC96: RNCC: 3 | RNVC: 2

28 Sep 2012

3040-01-611-9642
Rigid Connecting Link

016119642
167-7563785 PC 80: RNCC: 3 | RNVC: 2

28 Sep 2012

3040-01-611-9639
Rigid Connecting Link

016119639
167-7563784 PC77: RNCC: 3 | RNVC: 2

28 Sep 2012

3040-01-611-9566
Shouldered Shaft

016119566
22253-000: RNCC: 3 | RNVC: 2
3944849: RNCC: 5 | RNVC: 2
3944849: RNCC: 5 | RNVC: 9

28 Sep 2012

3040-01-611-9204
Rigid Connecting Link

016119204
167-7563785 PC 76: RNCC: 3 | RNVC: 2
167-7563785: RNCC: D | RNVC: 9

27 Sep 2012

3040-01-611-9182
Straight Shaft

016119182
152536A: RNCC: 3 | RNVC: 2
152536A: RNCC: 3 | RNVC: 9
151456 REV ITEM NO 4: RNCC: 5 | RNVC: 2
151456 REV ITEM NO 4: RNCC: 5 | RNVC: 9

27 Sep 2012

3040-01-611-8607
Multiple Gears Gearshaft

016118607
MTM-95002: RNCC: 3 | RNVC: 2

26 Sep 2012

3040-01-611-8531
Rigid Connecting Link

016118531
167-7563785 PC 85: RNCC: 3 | RNVC: 2

26 Sep 2012

3040-01-611-8507
Rigid Connecting Link

016118507
167-7563785 PC 79: RNCC: 3 | RNVC: 2
167-7563785: RNCC: 7 | RNVC: 2

26 Sep 2012

3040-01-611-7904
Control Cam

016117904
23502089: RNCC: 3 | RNVC: 2
ME23502089: RNCC: 5 | RNVC: 1
ME23502089: RNCC: 5 | RNVC: 1

25 Sep 2012

3040-01-611-7484
Oil Cooler Nrp

016117484
RE500657: RNCC: 3 | RNVC: 9
RE500657: RNCC: 5 | RNVC: 2

24 Sep 2012

3040-01-611-7289
Shouldered Shaft

016117289
12488614: RNCC: 3 | RNVC: 2

24 Sep 2012

3040-01-611-6260
Disk Brake Shoe

016116260
31766U: RNCC: 3 | RNVC: 2
36308: RNCC: 5 | RNVC: 9

20 Sep 2012

3040-01-611-5488
Thrust Brg Collar

016115488
378543-1: RNCC: 3 | RNVC: 1

18 Sep 2012

3040-01-611-4979
Rigid Connecting Link

016114979
MTEQP000074-1: RNCC: 3 | RNVC: 2

17 Sep 2012

3040-01-611-4712
Straight Shaft

016114712
12279023: RNCC: 3 | RNVC: 2

14 Sep 2012

3040-01-611-4729
Straight Shaft

016114729
HH5021-6: RNCC: 3 | RNVC: 2
HH5021 REV.F ITEM 6: RNCC: 5 | RNVC: 2

14 Sep 2012

3040-01-611-4683
Nonrotating Shaft Eye Bracket

016114683
12539592: RNCC: 3 | RNVC: 2

14 Sep 2012

3040-01-611-4641
Rigid Connecting Link

016114641
9377813: RNCC: 3 | RNVC: 2

14 Sep 2012

3040-01-611-3481
Linear Actuating Cylinder

016113481
2ACG12001: RNCC: 3 | RNVC: 2
2ACG12001: RNCC: 3 | RNVC: 9

12 Sep 2012

3040-01-611-2983
Straight Shaft

016112983
HH5021-17: RNCC: 3 | RNVC: 2
HH5021 REV.F ITEM 17: RNCC: 5 | RNVC: 2

11 Sep 2012

3040-01-611-2988
Mechanical Shaft

016112988
HH5021-16: RNCC: 3 | RNVC: 2
HH5021 REV.F ITEM 16: RNCC: 5 | RNVC: 2

11 Sep 2012

3040-01-611-2968
Mechanical Drive Housing

016112968
MC00007: RNCC: 3 | RNVC: 2
HH5021 REV.F ITEM 10: RNCC: 5 | RNVC: 2

11 Sep 2012

3040-01-611-2743
Shouldered Shaft

016112743
573687: RNCC: 3 | RNVC: 2
537687: RNCC: 5 | RNVC: 9

10 Sep 2012

3040-01-611-2346
Spline Adapter

016112346
2050811-1: RNCC: 3 | RNVC: 2

10 Sep 2012

3040-01-611-2212
Shaft And Tube Support Assembly

016112212
322460P-22.75: RNCC: 3 | RNVC: 2

7 Sep 2012

3040-01-611-1122
Driving Flange

016111122
10666619-011PEG: RNCC: 3 | RNVC: 2
10666619: RNCC: D | RNVC: 9

6 Sep 2012

3040-01-611-1127
Driving Flange

016111127
10666622-011PEG: RNCC: 3 | RNVC: 2
10666622: RNCC: D | RNVC: 9

6 Sep 2012

3040-01-611-0830
Spur Gearshaft

016110830
10666660-001: RNCC: 3 | RNVC: 2
10666660: RNCC: D | RNVC: 9

5 Sep 2012

3040-01-611-0824
Shouldered Shaft Assembly

016110824
10666657-001: RNCC: 3 | RNVC: 2
10666657: RNCC: D | RNVC: 9

5 Sep 2012

3040-01-611-0746
Controllable Swashplate

016110746
449-210-003-103: RNCC: 3 | RNVC: 2

5 Sep 2012

3040-01-611-0343
Rigid Connecting Link

016110343
3-13738-4: RNCC: 3 | RNVC: 2

5 Sep 2012

3040-01-611-0129
Nonaircraft Mechanical Actuator

016110129
14100/2S73710006: RNCC: 3 | RNVC: 2

4 Sep 2012

3040-01-610-9044
Extension Shaft

016109044
PWA500881-25: RNCC: 3 | RNVC: 2
PWA500881: RNCC: D | RNVC: 9

29 Aug 2012

3040-01-610-8714
Rigid Connecting Link

016108714
21C14062P20: RNCC: 3 | RNVC: 2

29 Aug 2012

3040-01-610-7352
Breather

016107352
4059218: RNCC: 1 | RNVC: 2
74057: RNCC: 3 | RNVC: 2
FB-10-04-103-0: RNCC: D | RNVC: 9

28 Aug 2012

3040-01-610-5384
Extension Shaft

016105384
PWA500881-03: RNCC: 3 | RNVC: 2

21 Aug 2012

3040-01-610-5333
Hub Clamp

016105333
PWA500881-01: RNCC: 3 | RNVC: 2

21 Aug 2012

3040-01-610-5245
Planetary Gears Carrier

016105245
7-511315306-001: RNCC: 3 | RNVC: 2

21 Aug 2012

3040-01-610-4884
Linear Actuating Cylinder Assembly

016104884
342-7067318-A4: RNCC: 3 | RNVC: 2
H643-6503-A4: RNCC: 5 | RNVC: 2

20 Aug 2012

3040-01-610-4672
Pivot Shaft Assembly

016104672
1092086: RNCC: 3 | RNVC: 2

17 Aug 2012

3040-01-610-4634
Linear Actuating Cylinder Cap

016104634
1078902: RNCC: 3 | RNVC: 2

17 Aug 2012

3040-01-610-4633
Linear Actuating Cylinder Cap

016104633
1078900: RNCC: 3 | RNVC: 2

17 Aug 2012

3040-01-610-4457
Linear Actuating Cylinder Head

016104457
1836321C1: RNCC: 3 | RNVC: 2

17 Aug 2012

3040-01-610-4300
Body Hub

016104300
14SCH 2-3/8: RNCC: 3 | RNVC: 2
741478 ITEM 8: RNCC: 5 | RNVC: 2

17 Aug 2012

3040-01-610-3499
Mechanically Actuated Spindle

016103499
803-6397269 REV PC NO 123: RNCC: 3 | RNVC: 2

15 Aug 2012

3040-01-610-2823
Controllable Swashplate

016102823
2788726: RNCC: 3 | RNVC: 2

14 Aug 2012

3040-01-610-2819
Flexible Drive Shaft

016102819
2788734: RNCC: 3 | RNVC: 2

14 Aug 2012

3040-01-610-2793
Manual Control Lever Assembly

016102793
3278941: RNCC: 3 | RNVC: 2

14 Aug 2012

3040-01-610-1210
Rigid Connecting Link

016101210
APIM06014: RNCC: 3 | RNVC: 2
APIM06014: RNCC: 5 | RNVC: 2

10 Aug 2012

3040-01-610-1107
Linear Actuating Cylinder Piston

016101107
R902400814: RNCC: 3 | RNVC: 2

9 Aug 2012

3040-01-610-1103
Linear Actuating Cylinder Piston

016101103
R902439068: RNCC: 3 | RNVC: 2

9 Aug 2012

3040-01-610-1044
Remote Control Lever

016101044
WL047-107-00: RNCC: 3 | RNVC: 2

9 Aug 2012

3040-01-610-1049
Shouldered Shaft

016101049
SEO97-16: RNCC: 3 | RNVC: 2

9 Aug 2012

3040-01-610-1041
Remote Control Lever

016101041
WL047-108-00: RNCC: 3 | RNVC: 2

9 Aug 2012

3040-01-610-0930
Spur Gearshaft

016100930
4993244-006: RNCC: 3 | RNVC: 2
29KP173: RNCC: 5 | RNVC: 2
29KP173: RNCC: 5 | RNVC: 9

9 Aug 2012

3040-01-610-0115
Manual Control Lever

016100115
4600847-1: RNCC: 3 | RNVC: 2

8 Aug 2012

3040-01-610-0116
Mechanical Drive Housing Part

016100116
4600848-1: RNCC: 3 | RNVC: 2

8 Aug 2012

3040-01-610-0117
Mechanical Drive Housing Part

016100117
4600849-1: RNCC: 3 | RNVC: 2

8 Aug 2012

3040-01-609-9927
Push-Pull Control Assembly

016099927
100-03333-076: RNCC: 3 | RNVC: 2

7 Aug 2012

3040-01-609-9911
Push-Pull Control Assembly

016099911
100-03333-066: RNCC: 3 | RNVC: 2

7 Aug 2012

3040-01-609-8048
Breather

016098048
HPB-101: RNCC: 3 | RNVC: 2

3 Aug 2012

3040-01-609-7688
Multiple Gears Gearshaft

016097688
94472: RNCC: 3 | RNVC: 2

2 Aug 2012

3040-01-609-7454
Linear Actuating Cylinder Assembly

016097454
R20010024CDCZ: RNCC: 3 | RNVC: 2

1 Aug 2012

3040-01-609-7453
Linear Actuating Cylinder Assembly

016097453
S30010020CCEZ: RNCC: 3 | RNVC: 2

1 Aug 2012

3040-01-609-6364
Shouldered Shaft

016096364
980019: RNCC: 3 | RNVC: 2

31 Jul 2012

3040-01-609-6034
Shouldered Shaft

016096034
94477: RNCC: 3 | RNVC: 2

30 Jul 2012

3040-01-609-5798
Bell Crank Support

016095798
13494786: RNCC: 3 | RNVC: 2

30 Jul 2012

3040-01-609-5571
Shouldered Shaft

016095571
13494787: RNCC: 3 | RNVC: 2

27 Jul 2012

3040-01-609-5153
Shouldered Shaft

016095153
403645: RNCC: 3 | RNVC: 2

26 Jul 2012

3040-01-609-4637
Manual Control Lever

016094637
844721 1: RNCC: 3 | RNVC: 2

26 Jul 2012

3040-01-609-3595
Mechanical Drive Housing Part

016093595
41100-ZY3-E02ZA: RNCC: 3 | RNVC: 9

24 Jul 2012

3040-01-609-2193
Band Type Brake

016092193
90-46035: RNCC: 3 | RNVC: 2
90-46035: RNCC: 5 | RNVC: 2

19 Jul 2012

3040-01-609-1643
Rigid Connecting Link

016091643
803-6397268 REV - PC NO.80: RNCC: 3 | RNVC: 2
803-6397268 REV -: RNCC: D | RNVC: 9

18 Jul 2012

3040-01-609-1635
Rigid Connecting Link

016091635
803-6397268 REV - PC NO.68: RNCC: 3 | RNVC: 2
803-6397268 REV -: RNCC: D | RNVC: 9

18 Jul 2012

3040-01-609-1351
Mechanically Actuated Spindle

016091351
A-801-S25940M001B: RNCC: 3 | RNVC: 2
S25940M001B: RNCC: 5 | RNVC: 2
S15642M603C ITEM 4: RNCC: D | RNVC: 9

17 Jul 2012

3040-01-609-1256
Rigid Connecting Link

016091256
803-6397268 REV - PC NO. 105: RNCC: 3 | RNVC: 2

17 Jul 2012

3040-01-609-1172
Shouldered Shaft

016091172
S25459M002C: RNCC: 3 | RNVC: 2
S15642M603C ITEM 3: RNCC: 5 | RNVC: 2

17 Jul 2012

3040-01-609-1165
Spur Gearshaft

016091165
S23017M001B: RNCC: 3 | RNVC: 2
A15642M603C ITEM 5: RNCC: 5 | RNVC: 2

17 Jul 2012

3040-01-609-1115
Mechanically Actuated Spindle

016091115
167-7569488 PC 222: RNCC: 3 | RNVC: 2

17 Jul 2012

3040-01-609-0960
Mechanically Actuated Spindle

016090960
167-7569488 PC 233: RNCC: 3 | RNVC: 2

16 Jul 2012

3040-01-608-8689
Linear Actuating Cylinder Cap

016088689
4997139-002: RNCC: 3 | RNVC: 2
3922575: RNCC: 5 | RNVC: 2
3922575: RNCC: 5 | RNVC: 9

13 Jul 2012

3040-01-608-8167
Piston Ring

016088167
GP6500600-C380: RNCC: 3 | RNVC: 2
10618699: RNCC: 5 | RNVC: 2

12 Jul 2012

3040-01-608-7226
Shouldered Axle

016087226
3867AS777-1: RNCC: 3 | RNVC: 2

9 Jul 2012

3040-01-608-7221
Linear Actuating Cylinder Piston Rod

016087221
DS-B99977-03-8-09-11-RF-09-FF-F-: RNCC: 3 | RNVC: 1
157228: RNCC: 5 | RNVC: 1

9 Jul 2012

3040-01-608-6789
Manual Control Lever

016086789
HH3210: RNCC: 3 | RNVC: 2
HH5090 REV.C FIND NO 10: RNCC: 5 | RNVC: 2
HH3080-10: RNCC: 5 | RNVC: 2
HH3080: RNCC: D | RNVC: 9

6 Jul 2012

3040-01-608-6444
Shaft Retaining Plate

016086444
B-818-12531-2: RNCC: 3 | RNVC: 2
12101M1402C ITEM 4: RNCC: 5 | RNVC: 2
12101M1402C: RNCC: D | RNVC: 9

6 Jul 2012

3040-01-608-6311
Nonaircraft Mechanical Actuator

016086311
B-800-12101M1402C: RNCC: 3 | RNVC: 2
12101M1402C: RNCC: D | RNVC: 9

5 Jul 2012

3040-01-608-6315
65 Urai Blower

016086315
65116020: RNCC: 3 | RNVC: 2
793150 REV G ITEM 7: RNCC: 5 | RNVC: 2
796060 REV B ITEM 14: RNCC: 5 | RNVC: 2
582209-001: RNCC: 5 | RNVC: 2
65116020: RNCC: 5 | RNVC: 9

5 Jul 2012

3040-01-608-5658
Disc Brake Caliper

016085658
564784: RNCC: 3 | RNVC: 2
B01-0647 ITEM 27: RNCC: 5 | RNVC: 2
B01-0647: RNCC: D | RNVC: 9

2 Jul 2012

3040-01-608-5188
Breather

016085188
16241-0567-0: RNCC: 3 | RNVC: 2

29 Jun 2012

3040-01-608-5056
Shouldered Shaft

016085056
29-47228: RNCC: 3 | RNVC: 2

29 Jun 2012

3040-01-608-4572
Brake And Clutch

016084572
LS1068130-2: RNCC: 3 | RNVC: 2
FEA055099F00024: RNCC: 5 | RNVC: 2
LS1068130: RNCC: D | RNVC: 9

27 Jun 2012

3040-01-608-4551
Straight Shaft

016084551
16232004-1: RNCC: 3 | RNVC: 2
16231000 FIND NO.8: RNCC: 5 | RNVC: 2
16232004: RNCC: D | RNVC: 9

27 Jun 2012

3040-01-608-4457
Brake Disc

016084457
810307: RNCC: 3 | RNVC: 2
B01-0648 ITEM 26: RNCC: 5 | RNVC: 2

27 Jun 2012

3040-01-608-4060
Linear Actuating Cylinder Piston

016084060
10666753-001: RNCC: 3 | RNVC: 2
10666753: RNCC: D | RNVC: 9

26 Jun 2012

3040-01-608-3987
Nonrotating Shaft Eye Bracket

016083987
A3168014-1: RNCC: 3 | RNVC: 2

26 Jun 2012

3040-01-608-3636
Mechanical Drive Housing Part

016083636
GYLC1131: RNCC: 3 | RNVC: 2

25 Jun 2012

3040-01-608-3109
Bell Crank Support

016083109
775-34057-103: RNCC: 3 | RNVC: 2
775-34057: RNCC: D | RNVC: 9

22 Jun 2012

3040-01-608-0492
Linear Actuating Cylinder

016080492
HH5040: RNCC: 3 | RNVC: 2
HH5000 REV.G ITEM 3: RNCC: 5 | RNVC: 2

20 Jun 2012

3040-01-608-0143
Pneumatic Control Assembly

016080143
BH-4028: RNCC: 3 | RNVC: 2
FIG NO.9-12 REF NO.8: RNCC: 5 | RNVC: 2

20 Jun 2012

3040-01-607-9666
Worm Wheel Gearshaft

016079666
5109491: RNCC: 3 | RNVC: 2
1864180: RNCC: 7 | RNVC: 2

19 Jun 2012

3040-01-607-9059
Shaft Collar

016079059
3867AS794-1: RNCC: 3 | RNVC: 2

18 Jun 2012

3040-01-607-8223
Shouldered Shaft

016078223
3867AS783-1: RNCC: 3 | RNVC: 2

15 Jun 2012

3040-01-607-7358
Brake Drum

016077358
B07-0063: RNCC: 3 | RNVC: 2
B01-0648 ITEM 2: RNCC: D | RNVC: 9

13 Jun 2012

3040-01-607-6756
Spur Gearshaft

016076756
B06-0065: RNCC: 3 | RNVC: 2
B01-0648 ITEM 4: RNCC: 5 | RNVC: 2

12 Jun 2012

3040-01-607-6649
Body Hub

016076649
H44600001: RNCC: 3 | RNVC: 2

11 Jun 2012

3040-01-607-6587
Rigid Connecting Link

016076587
B06-0043: RNCC: 3 | RNVC: 2
B01-0648 ITEM 12: RNCC: 5 | RNVC: 2

11 Jun 2012

3040-01-607-6544
Straight Shaft

016076544
76036-1005-1: RNCC: 3 | RNVC: 2
76036: RNCC: D | RNVC: 9

11 Jun 2012

3040-01-607-3080
Shouldered Shaft

016073080
7-511315101-001: RNCC: 3 | RNVC: 2

8 Jun 2012

3040-01-607-2452
Brake Lining Kit

016072452
219969: RNCC: 3 | RNVC: 2
219969: RNCC: 5 | RNVC: 2

6 Jun 2012

3040-01-607-2046
Pressure Regulator Shaft And Spring Assembly

016072046
17-3-2814-1: RNCC: 3 | RNVC: 2
17-2-2814: RNCC: D | RNVC: 9

5 Jun 2012

3040-01-607-1945
Nonrotating Shaft Eye Bracket

016071945
100806-107: RNCC: 3 | RNVC: 2

4 Jun 2012

3040-01-607-0975
Shaft Assembly Nrp

016070975
DAAK002140: RNCC: 3 | RNVC: 2

30 May 2012

3040-01-607-0785
Friction Lining

016070785
X25107: RNCC: 3 | RNVC: 2

30 May 2012

3040-01-607-0760
Body Hub

016070760
505551-1486: RNCC: 3 | RNVC: 1
FF-18504PC2: RNCC: 5 | RNVC: 1

30 May 2012

3040-01-607-0606
Shoe Assembly Ccw

016070606
478598-002: RNCC: 3 | RNVC: 2
478593-3: RNCC: 5 | RNVC: 9
20-8593-3: RNCC: C | RNVC: 1

30 May 2012

3040-01-607-0603
Piston Rod Ring

016070603
10666584-001: RNCC: 3 | RNVC: 2
10666584: RNCC: D | RNVC: 9

30 May 2012

3040-01-607-0523
Nonaircraft Mechanical Actuator

016070523
342-8357102-A9: RNCC: 3 | RNVC: 2
E643-7002-A9: RNCC: 5 | RNVC: 2

30 May 2012

3040-01-607-0520
Nonaircraft Mechanical Actuator

016070520
342-8357102-A8: RNCC: 3 | RNVC: 2
E643-7002-A8: RNCC: 5 | RNVC: 2

30 May 2012

3040-01-607-0097
Brake Disc

016070097
45097350: RNCC: 3 | RNVC: 2

29 May 2012

3040-01-606-9874
Rigid Connecting Link

016069874
709 7488: RNCC: 3 | RNVC: 2

29 May 2012

3040-01-606-8825
Hydraulic Accumulator

016068825
1318273: RNCC: 3 | RNVC: 2

25 May 2012

3040-01-606-8549
Linear Actuating Cylinder Assembly

016068549
347/00513: RNCC: 3 | RNVC: 2

24 May 2012

3040-01-606-8019
Nonaircraft Mechanical Actuator

016068019
3299R4204-S: RNCC: 3 | RNVC: 2
3299R4204-S: RNCC: 3 | RNVC: 9

24 May 2012

3040-01-606-7827
Bell Crank

016067827
716F0353: RNCC: 3 | RNVC: 2

23 May 2012

3040-01-606-7181
Mechanical Drive Housing

016067181
08002172: RNCC: 3 | RNVC: 2
RES800M3R-C1157 MOD: RNCC: 5 | RNVC: 2

22 May 2012

3040-01-606-7046
Shouldered Shaft

016067046
901411: RNCC: 3 | RNVC: 2

22 May 2012

3040-01-606-6805
Linear Actuating Cylinder Head

016066805
184202-001: RNCC: 3 | RNVC: 2
184202-001: RNCC: 3 | RNVC: 9

22 May 2012

3040-01-606-6140
Ball Joint

016066140
3981: RNCC: 3 | RNVC: 2

22 May 2012

3040-01-606-5114
Linear Actuating Cylinder Assembly

016065114
716 0020: RNCC: 3 | RNVC: 2

18 May 2012

3040-01-606-5108
Linear Actuating Cylinder Assembly

016065108
711 0380-P5: RNCC: 3 | RNVC: 2

18 May 2012

3040-01-606-5077
Rigid Connecting Link

016065077
215632: RNCC: 3 | RNVC: 9
TTIXXAC8620: RNCC: 5 | RNVC: 2

18 May 2012

3040-01-606-5061
Linear Actuating Cylinder Assembly

016065061
716 0427-P6: RNCC: 3 | RNVC: 2

18 May 2012

Load More Results