What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 165 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 165 of 300

3040-01-641-4802
Linear Actuating Cylinder Assembly

016414802
120-117-4: RNCC: 3 | RNVC: 2
120-117-4: RNCC: 5 | RNVC: 2
1681EQ: RNCC: 5 | RNVC: 2
1681E0: RNCC: 5 | RNVC: 9

23 Jan 2015

3040-01-641-4175
Nonaircraft Mechanical Actuator

016414175
167-8278280 ASSY 99: RNCC: 3 | RNVC: 2
8278280: RNCC: D | RNVC: 9

21 Jan 2015

3040-01-641-4140
Mechanically Actuated Spindle

016414140
167-8200543 PC 94: RNCC: 3 | RNVC: 1
167-8278262 PC 34: RNCC: 5 | RNVC: 1
8200543: RNCC: D | RNVC: 9

21 Jan 2015

3040-01-641-4019
Rigid Connecting Link

016414019
782-7667214 ITEM 37: RNCC: 3 | RNVC: 2
782-7666819 AY 79: RNCC: 5 | RNVC: 2
782-7667214: RNCC: D | RNVC: 9

21 Jan 2015

3040-01-641-3938
Mechanically Actuated Spindle

016413938
782-7666819 ITEM 9: RNCC: 3 | RNVC: 2
782-7666819: RNCC: D | RNVC: 9

20 Jan 2015

3040-01-641-3855
Straight Shaft

016413855
38209601A: RNCC: 3 | RNVC: 2
38209601A: RNCC: 5 | RNVC: 2

20 Jan 2015

3040-01-641-2868
Shouldered Shaft

016412868
7383858-H5470249-0139: RNCC: 3 | RNVC: 1
H547-0249-139: RNCC: 5 | RNVC: 1
167-7106787-139: RNCC: 5 | RNVC: 1
H547-0001-H5470249-0139: RNCC: 5 | RNVC: 1
H547-0249-139D4: RNCC: 5 | RNVC: 2
7383858-H5470249-0139D4: RNCC: 5 | RNVC: 2
H547-0001-H5470249-0139D4: RNCC: 5 | RNVC: 2
167-7106787-139D4: RNCC: 5 | RNVC: 2

15 Jan 2015

3040-01-641-2853
Mechanical Drive Housing

016412853
H525-7708-78: RNCC: 3 | RNVC: 2
B805-20176: RNCC: 5 | RNVC: 2

15 Jan 2015

3040-01-641-2835
Manual Control Lever

016412835
782-7666615,AY 88,ITEM 12: RNCC: 3 | RNVC: 2

15 Jan 2015

3040-01-641-2806
Mechanical Drive Housing

016412806
501-7066669-76: RNCC: 3 | RNVC: 2
H525-7708-76: RNCC: 3 | RNVC: 2
20170: RNCC: 5 | RNVC: 2

15 Jan 2015

3040-01-641-2561
Straight Shaft

016412561
7383858-H5470249-0104: RNCC: 3 | RNVC: 1
167-7106787-104: RNCC: 5 | RNVC: 1
H547-0249-104: RNCC: 5 | RNVC: 1
H547-0001-H5470249-0104: RNCC: 5 | RNVC: 1
167-7106787-104D4: RNCC: 5 | RNVC: 2
H547-0001-H5470249-0104D4: RNCC: 5 | RNVC: 2
7383858-H5470249-0104D4: RNCC: 5 | RNVC: 2
H547-0249-104D4: RNCC: 5 | RNVC: 2

14 Jan 2015

3040-01-641-2554
Shouldered Shaft

016412554
782-7666615,AY86,ITEM 14: RNCC: 3 | RNVC: 2

14 Jan 2015

3040-01-641-2199
Housing Adapter

016412199
F168631: RNCC: 3 | RNVC: 2
F169833 REV - ITEM NO.5: RNCC: C | RNVC: 1

13 Jan 2015

3040-01-641-2122
Shouldered Shaft

016412122
782-7666615 AY 88 ITEM 14B: RNCC: 3 | RNVC: 2

13 Jan 2015

3040-01-641-2087
Rigid Connecting Link

016412087
782-7667214 ITEM 9: RNCC: 3 | RNVC: 2
782-7666819 AY 77: RNCC: 5 | RNVC: 2

13 Jan 2015

3040-01-641-2021
Straight Shaft

016412021
501-7066625-44: RNCC: 3 | RNVC: 1
H525-7402-44: RNCC: 5 | RNVC: 1
501-7066625-44L1: RNCC: 5 | RNVC: 2
H525-7402-44L1: RNCC: 5 | RNVC: 2

13 Jan 2015

3040-01-641-1693
Mechanically Actuated Spindle

016411693
167-7619284 ITEM 47: RNCC: 3 | RNVC: 2

12 Jan 2015

3040-01-641-1387
Straight Shaft

016411387
00-915283-00003: RNCC: 3 | RNVC: 2
PL-60073 ITEM 13: RNCC: 5 | RNVC: 2

9 Jan 2015

3040-01-641-0906
Rigid Connecting Link

016410906
167-8278271 ITEM 20: RNCC: 3 | RNVC: 2

8 Jan 2015

3040-01-641-0901
Rigid Connecting Link

016410901
167-8278271 ITEM 12: RNCC: 3 | RNVC: 2

8 Jan 2015

3040-01-641-0834
Shouldered Shaft

016410834
845-7526489-XX-08-X-X-X-X-008: RNCC: 3 | RNVC: 2
845-7526489-2B-08-A-3-N-E-008: RNCC: 5 | RNVC: 2
845-7526489: RNCC: D | RNVC: 9

8 Jan 2015

3040-01-641-0782
Shouldered Shaft

016410782
845-7526489-2C-14-B-4-N-H-008: RNCC: 3 | RNVC: 2
845-7526489: RNCC: D | RNVC: 9

8 Jan 2015

3040-01-641-0670
Counterbalance Weight

016410670
SHB-15: RNCC: 3 | RNVC: 2

8 Jan 2015

3040-01-641-0339
Mechanically Actuated Spindle

016410339
167-8279345 ITEM 8: RNCC: 3 | RNVC: 2
167-8204844 ITEM 6: RNCC: 5 | RNVC: 2

7 Jan 2015

3040-01-641-0334
Shouldered Shaft

016410334
845-7526489-2A-05-A-3-N-D-007: RNCC: 3 | RNVC: 2
845-7526489 ITEM NO. 7: RNCC: 5 | RNVC: 1
845-7526489: RNCC: D | RNVC: 9

7 Jan 2015

3040-01-641-0306
Belt-Chain Tension Adjusting Device

016410306
89393: RNCC: 3 | RNVC: 2
IDL-0011: RNCC: 5 | RNVC: 2

7 Jan 2015

3040-01-641-0034
Shouldered Shaft

016410034
845-7526489-2A-05-A-3-N-D-008: RNCC: 3 | RNVC: 2
845-7526489 ITEM NO. 8: RNCC: 5 | RNVC: 1
845-7526489: RNCC: D | RNVC: 9

6 Jan 2015

3040-01-640-9974
Straight Shaft

016409974
754-7066811-50: RNCC: 3 | RNVC: 1
754-7066814-65: RNCC: 5 | RNVC: 1
H553-1501-50: RNCC: 5 | RNVC: 1
H553-1504-65: RNCC: 5 | RNVC: 1
754-7066811-50L1: RNCC: 5 | RNVC: 2
754-7066814-65L1: RNCC: 5 | RNVC: 2
H553-1501-50L1: RNCC: 5 | RNVC: 2
H553-1504-65L1: RNCC: 5 | RNVC: 2

6 Jan 2015

3040-01-640-9902
Mechanically Actuated Spindle

016409902
167-8279345 ITEM 45: RNCC: 3 | RNVC: 2
167-8280347 ITEM 6: RNCC: 5 | RNVC: 2

6 Jan 2015

3040-01-640-9836
Ball Joint

016409836
E250: RNCC: 3 | RNVC: 2

6 Jan 2015

3040-01-640-9575
Rigid Connecting Link

016409575
572-8204465 ITEM 8: RNCC: 3 | RNVC: 2
782-8200791 AY 96: RNCC: 5 | RNVC: 2

5 Jan 2015

3040-01-640-9581
Straight Shaft

016409581
782-7666263 AY 83 ITEM 103: RNCC: 3 | RNVC: 2

5 Jan 2015

3040-01-640-9284
Rigid Connecting Link

016409284
167-8278267 ITEM 32: RNCC: 3 | RNVC: 2
167-8278492 ITEM 25: RNCC: 5 | RNVC: 2

2 Jan 2015

3040-01-640-9066
Mechanically Actuated Spindle

016409066
782-7666609 ITEM 34: RNCC: 3 | RNVC: 2

31 Dec 2014

3040-01-640-9006
Rigid Connecting Link

016409006
572-8204496 ITEM 7: RNCC: 3 | RNVC: 2
572-8200791 AY 99: RNCC: 5 | RNVC: 2

31 Dec 2014

3040-01-640-9002
Mechanically Actuated Spindle

016409002
167-8396977 ITEM 16: RNCC: 3 | RNVC: 2

31 Dec 2014

3040-01-640-8925
Rigid Connecting Link

016408925
572-8204465 ITEM 11: RNCC: 3 | RNVC: 2
782-8200791 ASSY 95: RNCC: 5 | RNVC: 2

30 Dec 2014

3040-01-640-8906
Straight Shaft

016408906
782-7666263 AY 82 ITEM 103: RNCC: 3 | RNVC: 2

30 Dec 2014

3040-01-640-8674
Rigid Connecting Link

016408674
572-8204496 ITEM 8: RNCC: 3 | RNVC: 2
572-8200791 ASSY 98: RNCC: 5 | RNVC: 2

30 Dec 2014

3040-01-640-8460
Straight Shaft

016408460
596-7411116-65: RNCC: 3 | RNVC: 1
B541-7020-65L1: RNCC: 5 | RNVC: 1
B541-7020-65: RNCC: 5 | RNVC: 1
596-7411116-65L1: RNCC: 5 | RNVC: 2

29 Dec 2014

3040-01-640-8339
Shouldered Shaft

016408339
782-7666615 AY 89 ITEM 14: RNCC: 3 | RNVC: 2

24 Dec 2014

3040-01-640-8332
Mechanically Actuated Spindle

016408332
167-8395675 ITEM 13: RNCC: 3 | RNVC: 2

24 Dec 2014

3040-01-640-8166
Tail Rod

016408166
595-7067878-46: RNCC: 3 | RNVC: 1
H692-1805-46L1: RNCC: 5 | RNVC: 1
H692-1805-46: RNCC: 5 | RNVC: 1
595-7067878-46L1: RNCC: 5 | RNVC: 2

23 Dec 2014

3040-01-640-8052
Straight Shaft

016408052
501-7108142-76: RNCC: 3 | RNVC: 1
H525-7207-76L1: RNCC: 5 | RNVC: 1
H5257207-076L1: RNCC: 5 | RNVC: 1
H547-0001-H5257207-076L1: RNCC: 5 | RNVC: 1
7383858-H5257207-076: RNCC: 5 | RNVC: 1
H525-7207-76: RNCC: 5 | RNVC: 1
H5257207-076: RNCC: 5 | RNVC: 1
H547-0001-H5257207-076: RNCC: 5 | RNVC: 1
7383858-H5257207-076L1: RNCC: 5 | RNVC: 1
501-7108142-76L1: RNCC: 5 | RNVC: 2

23 Dec 2014

3040-01-640-8035
Rigid Connecting Link

016408035
751-6402629, FIND NO. 1: RNCC: 3 | RNVC: 1
211068946: RNCC: 5 | RNVC: 1
211068946L1: RNCC: 5 | RNVC: 1
751-6402629, FIND NO. 1L1: RNCC: 5 | RNVC: 2

23 Dec 2014

3040-01-640-8038
Bell Crank

016408038
6402626 IT-1: RNCC: 3 | RNVC: 1
211068937: RNCC: 5 | RNVC: 1
751-6402626 FIND NO 1: RNCC: 5 | RNVC: 1
211068937L1: RNCC: 5 | RNVC: 2
6402626 IT-1L1: RNCC: 5 | RNVC: 2
751-6402626 FIND NO 1L1: RNCC: 5 | RNVC: 2

23 Dec 2014

3040-01-640-7782
Idler Pu Guide Assy

016407782
IM-CVN78-490: RNCC: 3 | RNVC: 2
IM-CVN-490: RNCC: 5 | RNVC: 2

22 Dec 2014

3040-01-640-7732
Shaft Collar

016407732
33393: RNCC: 3 | RNVC: 2
CLR-0005: RNCC: 5 | RNVC: 2

22 Dec 2014

3040-01-640-7500
Straight Shaft

016407500
167-6404556-37: RNCC: 3 | RNVC: 1
DF1502-243-37: RNCC: 5 | RNVC: 1
596-7411115-37: RNCC: 5 | RNVC: 1
B541-7010-37: RNCC: 5 | RNVC: 1
167-6404556-37L1: RNCC: 5 | RNVC: 2
596-7411115-37L1: RNCC: 5 | RNVC: 2
B541-7010-37L1: RNCC: 5 | RNVC: 2
DF1502-243-37L1: RNCC: 5 | RNVC: 2

19 Dec 2014

3040-01-640-7460
Manual Control Lever

016407460
3017267: RNCC: 3 | RNVC: 1

19 Dec 2014

3040-01-640-7429
Manual Control Lever

016407429
3017268: RNCC: 3 | RNVC: 1
3017268Q3: RNCC: 5 | RNVC: 2

19 Dec 2014

3040-01-640-7413
Rigid Connecting Link

016407413
7072605-A8: RNCC: 3 | RNVC: 1
751-7072605-A8: RNCC: 5 | RNVC: 1
751-7072605-A8L1: RNCC: 5 | RNVC: 2
7072605-A8L1: RNCC: 5 | RNVC: 2

19 Dec 2014

3040-01-640-7409
Rigid Connecting Link

016407409
7072623-3: RNCC: 3 | RNVC: 1
751-7072605-55: RNCC: 5 | RNVC: 1
751-7072606-55: RNCC: 5 | RNVC: 1
751-7072623-3: RNCC: 5 | RNVC: 1
7072606-55: RNCC: 5 | RNVC: 1
7072606-55L1: RNCC: 5 | RNVC: 2
7072623-3L1: RNCC: 5 | RNVC: 2
751-7072605-55L1: RNCC: 5 | RNVC: 2
751-7072606-55L1: RNCC: 5 | RNVC: 2
751-7072623-3L1: RNCC: 5 | RNVC: 2

19 Dec 2014

3040-01-640-7284
Rigid Connecting Link

016407284
123-8180878 ITEM 11M: RNCC: 3 | RNVC: 1
4645269-011: RNCC: 5 | RNVC: 1
4645269-0011: RNCC: 5 | RNVC: 1
8180878 ITEM 11M: RNCC: 5 | RNVC: 1
123-8180878 ITEM 11ML1: RNCC: 5 | RNVC: 2
4645269-0011L1: RNCC: 5 | RNVC: 2
8180878 ITEM 11ML1: RNCC: 5 | RNVC: 2
4645269-011L1: RNCC: 5 | RNVC: 2

19 Dec 2014

3040-01-640-7266
Shouldered Shaft

016407266
125730: RNCC: 3 | RNVC: 9
SHF-0044: RNCC: 5 | RNVC: 2

19 Dec 2014

3040-01-640-7139
Shouldered Shaft

016407139
167-7066800-80: RNCC: 3 | RNVC: 1
H547-1803-80: RNCC: 5 | RNVC: 1
167-7066800-80L1: RNCC: 5 | RNVC: 2
H547-1803-80L1: RNCC: 5 | RNVC: 2

18 Dec 2014

3040-01-640-6758
Shouldered Shaft

016406758
595-7067876-167: RNCC: 3 | RNVC: 1
H692-1802-167: RNCC: 5 | RNVC: 1
595-7067876-167L1: RNCC: 5 | RNVC: 2
H692-1802-167L1: RNCC: 5 | RNVC: 2

17 Dec 2014

3040-01-640-6567
Straight Shaft

016406567
167-7384258-17: RNCC: 3 | RNVC: 1
7383858-H5471905-017: RNCC: 5 | RNVC: 1
H547-0001-H5471905-017: RNCC: 5 | RNVC: 1
H547-1905-17: RNCC: 5 | RNVC: 1
167-7384258-17L1: RNCC: 5 | RNVC: 2
7383858-H5471905-017L1: RNCC: 5 | RNVC: 2
H547-0001-H5471905-017L1: RNCC: 5 | RNVC: 2
H547-1905-17L1: RNCC: 5 | RNVC: 2

17 Dec 2014

3040-01-640-6421
Size 14 Assem Brake

016406421
45174: RNCC: 3 | RNVC: 2
40210 ITEM NO. 215: RNCC: 5 | RNVC: 1
40210: RNCC: D | RNVC: 9

16 Dec 2014

3040-01-640-6391
Shaft Collar

016406391
66-4453-15G: RNCC: 3 | RNVC: 2

16 Dec 2014

3040-01-640-6384
Rigid Connecting Link

016406384
284A5036-23: RNCC: 3 | RNVC: 2

16 Dec 2014

3040-01-634-4738
Rigid Connecting Link

016344738
7072606-A8: RNCC: 3 | RNVC: 1
751-7072608-A8: RNCC: 5 | RNVC: 1
7072606-A8L1: RNCC: 5 | RNVC: 2
751-7072608-A8L1: RNCC: 5 | RNVC: 2

15 Dec 2014

3040-01-634-0144
Shaft Collar

016340144
013937: RNCC: 3 | RNVC: 2

12 Dec 2014

3040-01-633-9856
Straight Shaft

016339856
H525-7208-22: RNCC: 3 | RNVC: 2
564-7108143-22: RNCC: 3 | RNVC: 2

11 Dec 2014

3040-01-633-9858
Rigid Connecting Link

016339858
564-7108143-34: RNCC: 3 | RNVC: 2
H525-7208-34: RNCC: 3 | RNVC: 2

11 Dec 2014

3040-01-633-9817
Straight Shaft

016339817
563-7285380-3: RNCC: 3 | RNVC: 1
H552-6004-103: RNCC: 5 | RNVC: 1
H552-6004-3: RNCC: 5 | RNVC: 1
563-7285380-3L1: RNCC: 5 | RNVC: 2
H552-6004-103L1: RNCC: 5 | RNVC: 2
H552-6004-3L1: RNCC: 5 | RNVC: 2

11 Dec 2014

3040-01-633-9780
Straight Shaft

016339780
563-7285380-203: RNCC: 3 | RNVC: 1
H552-6004-203: RNCC: 5 | RNVC: 1
563-7285380-203L1: RNCC: 5 | RNVC: 2
H552-6004-203L1: RNCC: 5 | RNVC: 2

11 Dec 2014

3040-01-633-9724
Mechanically Actuated Spindle

016339724
167-7619284 ITEM NO. 12: RNCC: 3 | RNVC: 2
167-7619284: RNCC: D | RNVC: 9

11 Dec 2014

3040-01-633-9302
Marine Gear Nrp

016339302
21116402: RNCC: 3 | RNVC: 2

10 Dec 2014

3040-01-633-9185
Shouldered Shaft

016339185
FEA055099000002: RNCC: 3 | RNVC: 2
A14012 REV 5 ITEM 26: RNCC: 5 | RNVC: 2

9 Dec 2014

3040-01-633-9178
Size 9 Brake

016339178
41493: RNCC: 3 | RNVC: 2
40230 ITEM 126: RNCC: 5 | RNVC: 1
40230: RNCC: D | RNVC: 9

9 Dec 2014

3040-01-633-8812
Rigid Connecting Link

016338812
167-8278269 PC 14: RNCC: 3 | RNVC: 2
167-8278267 PC 27: RNCC: 5 | RNVC: 2

8 Dec 2014

3040-01-633-8726
Shouldered Shaft

016338726
FEA055099000000: RNCC: 3 | RNVC: 2
A14012 REV 5 ITEM 25: RNCC: 5 | RNVC: 1
A14012: RNCC: D | RNVC: 9

8 Dec 2014

3040-01-633-8689
Unlock Cam

016338689
FEA0550-170-008: RNCC: 3 | RNVC: 2
A14012 REV 5 ITEM 12: RNCC: 5 | RNVC: 1
FEA05509CW00024: RNCC: D | RNVC: 9

8 Dec 2014

3040-01-633-8480
Jaw Locking Cam

016338480
FEA0550-227-017: RNCC: 3 | RNVC: 2
A14012 REV 5 ITEM 20: RNCC: 5 | RNVC: 1

5 Dec 2014

3040-01-633-8453
Rigid Connecting Link

016338453
167-8278267 ITEM 28: RNCC: 3 | RNVC: 2
167-8278268 ITEM 60: RNCC: 5 | RNVC: 2
167-8278270 ITEM 13: RNCC: 5 | RNVC: 2

5 Dec 2014

3040-01-633-8434
Shouldered Shaft

016338434
167-8278267 PC 1: RNCC: 3 | RNVC: 2
167-8278269 PC 3: RNCC: 5 | RNVC: 1

5 Dec 2014

3040-01-633-8347
Cab Lock Cam

016338347
13055114: RNCC: 3 | RNVC: 2

5 Dec 2014

3040-01-633-7849
Slip Ring Nrp

016337849
5267324-002: RNCC: 3 | RNVC: 2

3 Dec 2014

3040-01-633-7645
Shouldered Shaft

016337645
12542322: RNCC: 3 | RNVC: 2

3 Dec 2014

3040-01-633-7589
Size 150 Brake

016337589
45101: RNCC: 3 | RNVC: 2
40200 ITEM 238: RNCC: 5 | RNVC: 1

3 Dec 2014

3040-01-633-7470
Push Rod

016337470
7614787: RNCC: 3 | RNVC: 1
7614787L1: RNCC: 5 | RNVC: 2

3 Dec 2014

3040-01-633-5029
Planetary Gears Carrier

016335029
12446550: RNCC: 3 | RNVC: 2

25 Nov 2014

3040-01-633-4587
Shouldered Shaft

016334587
201-8463125ITEM18: RNCC: 3 | RNVC: 1

23 Nov 2014

3040-01-633-3262
Shouldered Shaft

016333262
167-7107409-8: RNCC: 3 | RNVC: 2
H547-1720-8: RNCC: 5 | RNVC: 2

18 Nov 2014

3040-01-633-3132
Manual Control Lever Assembly

016333132
100-7108435-B4: RNCC: 3 | RNVC: 2
H547-0209-B4: RNCC: 5 | RNVC: 2

18 Nov 2014

3040-01-633-3137
Manual Control Lever Assembly

016333137
100-7108435-B2: RNCC: 3 | RNVC: 2
H547-0209-B2: RNCC: 5 | RNVC: 2

18 Nov 2014

3040-01-633-2668
Mechanical Drive Housing

016332668
12542300: RNCC: 3 | RNVC: 2

17 Nov 2014

3040-01-633-2476
Straight Shaft

016332476
3H40151-N65NM: RNCC: 3 | RNVC: 2
40200(NPS14)ITEM 3: RNCC: 5 | RNVC: 2
40200: RNCC: D | RNVC: 9

14 Nov 2014

3040-01-633-2222
Straight Shaft

016332222
3H40150-N65NM: RNCC: 3 | RNVC: 2
40200(NPS8)ITEM 3: RNCC: 5 | RNVC: 2
40200: RNCC: D | RNVC: 9

13 Nov 2014

3040-01-633-2138
Straight Shaft

016332138
167-7107409-7: RNCC: 3 | RNVC: 2
547-1720-7: RNCC: 5 | RNVC: 2

13 Nov 2014

3040-01-633-1837
Shouldered Shaft

016331837
105602: RNCC: 3 | RNVC: 2

13 Nov 2014

3040-01-633-1838
Shouldered Shaft

016331838
107085: RNCC: 3 | RNVC: 2

13 Nov 2014

3040-01-633-1451
Hydraulic Accumulator

016331451
4001SB: RNCC: 3 | RNVC: 1
4001-39710: RNCC: 5 | RNVC: 1
4001-39710Q5: RNCC: 5 | RNVC: 2
4001SBQ5: RNCC: 5 | RNVC: 2

12 Nov 2014

3040-01-633-1258
Remote Control Lever

016331258
9720-14: RNCC: 3 | RNVC: 2

10 Nov 2014

3040-01-633-0812
Shouldered Shaft

016330812
3504-11 ITEM 45: RNCC: 3 | RNVC: 1
3504-11 ITEM 45Q3: RNCC: 5 | RNVC: 2
3504-11 ITEM 45: RNCC: 5 | RNVC: 9

6 Nov 2014

3040-01-633-0239
Rotary Actuating Cylinder Assembly

016330239
105601: RNCC: 3 | RNVC: 2

5 Nov 2014

3040-01-632-7892
Linear Actuating Cylinder Assembly

016327892
6P2-11110-10-9S: RNCC: 3 | RNVC: 2

29 Oct 2014

3040-01-632-7881
Shaft Collar

016327881
F078528: RNCC: 3 | RNVC: 2
F104523 ITEM 6: RNCC: 5 | RNVC: 2

29 Oct 2014

3040-01-632-7380
Nonaircraft Mechanical Actuator

016327380
1315-A20H 10IN: RNCC: 3 | RNVC: 2
1315-A20-W-0001: RNCC: 5 | RNVC: 2

28 Oct 2014

3040-01-632-6980
Band Type Brake

016326980
DT203X62: RNCC: 3 | RNVC: 9

28 Oct 2014

3040-01-632-6301
Mechanical Drive Housing Part

016326301
61A-45301-10-8D: RNCC: 3 | RNVC: 2

24 Oct 2014

3040-01-632-6255
Pneumatic Actuator Cylinder Housing

016326255
105607: RNCC: 3 | RNVC: 2

24 Oct 2014

3040-01-632-5643
Shouldered Shaft

016325643
90-7815-29: RNCC: 3 | RNVC: 2

23 Oct 2014

3040-01-632-5644
Shouldered Shaft

016325644
90-7815-30: RNCC: 3 | RNVC: 2

23 Oct 2014

3040-01-632-5635
Shouldered Shaft

016325635
65-1933-26: RNCC: 3 | RNVC: 2

23 Oct 2014

3040-01-632-5632
Rigid Connecting Link

016325632
60-7208-4: RNCC: 3 | RNVC: 2

23 Oct 2014

3040-01-632-5633
Shouldered Shaft

016325633
65-1933-24: RNCC: 3 | RNVC: 2

23 Oct 2014

3040-01-632-5628
Control Cam

016325628
147A0022-31: RNCC: 3 | RNVC: 2

23 Oct 2014

3040-01-632-5626
Control Cam

016325626
141A6310-8: RNCC: 3 | RNVC: 2

23 Oct 2014

3040-01-632-5541
Nonrotating Shaft Eye Bracket

016325541
112429: RNCC: 3 | RNVC: 2
HM422 11 001: RNCC: D | RNVC: 9

23 Oct 2014

3040-01-632-5434
Shouldered Shaft

016325434
105603: RNCC: 3 | RNVC: 2

23 Oct 2014

3040-01-632-4184
Straight Shaft

016324184
69J-43801-01-00: RNCC: 3 | RNVC: 2

17 Oct 2014

3040-01-632-3623
Shouldered Shaft

016323623
4L5372-1: RNCC: 3 | RNVC: 2

16 Oct 2014

3040-01-632-3425
Rigid Connecting Link

016323425
4147-0038-1: RNCC: 3 | RNVC: 2

16 Oct 2014

3040-01-632-3128
Nonaircraft Mechanical Actuator

016323128
8571431: RNCC: 3 | RNVC: 2
8571431: RNCC: 5 | RNVC: 2

15 Oct 2014

3040-01-632-3028
Pivot Shaft Assembly

016323028
BC3Z-17566-A: RNCC: 3 | RNVC: 9

15 Oct 2014

3040-01-632-3019
Linear Actuating Cylinder Assembly

016323019
DC3Z-2140-D: RNCC: 3 | RNVC: 9

15 Oct 2014

3040-01-632-2539
Rigid Connecting Link

016322539
0335905: RNCC: 3 | RNVC: 2

14 Oct 2014

3040-01-632-2490
Shouldered Shaft

016322490
5007457: RNCC: 3 | RNVC: 2

14 Oct 2014

3040-01-632-2183
Straight Shaft

016322183
3L5479-1: RNCC: 3 | RNVC: 2
315479: RNCC: D | RNVC: 9

10 Oct 2014

3040-01-632-2051
Linear Actuating Cylinder

016322051
6.07.0588: RNCC: 3 | RNVC: 2

10 Oct 2014

3040-01-632-1966
Mechanical Drive Housing

016321966
8M0117258: RNCC: 3 | RNVC: 2
8M0053108: RNCC: 5 | RNVC: 9

10 Oct 2014

3040-01-632-1737
Shouldered Shaft

016321737
JMD15-075P: RNCC: 3 | RNVC: 2
JMD15-075: RNCC: 5 | RNVC: 9

9 Oct 2014

3040-01-632-1222
Bevel Gearshaft

016321222
0352899: RNCC: 3 | RNVC: 2

8 Oct 2014

3040-01-632-1197
Mechanically Actuated Spindle

016321197
0353727: RNCC: 3 | RNVC: 2

8 Oct 2014

3040-01-632-0809
Linear Actuating Cylinder Assembly

016320809
6.43.0178: RNCC: 3 | RNVC: 2

7 Oct 2014

3040-01-632-0752
Piston Ring

016320752
14006376: RNCC: 3 | RNVC: 2
14004720: RNCC: 3 | RNVC: 9
14004720: RNCC: 5 | RNVC: 9

7 Oct 2014

3040-01-632-0667
Linear Actuating Cylinder Piston

016320667
14004714: RNCC: 3 | RNVC: 2
14004714: RNCC: 5 | RNVC: 9

7 Oct 2014

3040-01-632-0469
Bevel Gearshaft

016320469
0351147: RNCC: 3 | RNVC: 2

6 Oct 2014

3040-01-632-0382
Shouldered Shaft

016320382
624848: RNCC: 3 | RNVC: 2

6 Oct 2014

3040-01-632-0310
Rotating Shaft Eye Bracket

016320310
59-0264A: RNCC: 3 | RNVC: 2

6 Oct 2014

3040-01-632-0090
Manual Control Lever

016320090
204712: RNCC: 3 | RNVC: 2

3 Oct 2014

3040-01-631-9137
Tie Bar Assembly

016319137
8M0088753: RNCC: 3 | RNVC: 2

30 Sep 2014

3040-01-631-8923
Linear Actuating Cylinder Assembly

016318923
HMW2024: RNCC: 3 | RNVC: 9

30 Sep 2014

3040-01-631-8892
Linear Actuating Cylinder Assembly

016318892
HMW3028: RNCC: 3 | RNVC: 9

30 Sep 2014

3040-01-631-8697
Shouldered Shaft

016318697
9M0053105: RNCC: 3 | RNVC: 2

29 Sep 2014

3040-01-631-8117
Push-Pull Control Assembly

016318117
8224187-14: RNCC: 3 | RNVC: 2

26 Sep 2014

3040-01-631-8062
Mechanical Drive Housing Part

016318062
8M0078254: RNCC: 3 | RNVC: 2

25 Sep 2014

3040-01-631-7677
Rigid Connecting Link

016317677
167-7563785 PC88: RNCC: 3 | RNVC: 2

24 Sep 2014

3040-01-631-7255
Nonaircraft Mechanical Actuator

016317255
8571397: RNCC: 3 | RNVC: 2

23 Sep 2014

3040-01-631-6419
Linear Actuating Cylinder Assembly

016316419
8226316: RNCC: 3 | RNVC: 2

22 Sep 2014

3040-01-631-6406
Linear Actuating Cylinder Assembly

016316406
8572996: RNCC: 3 | RNVC: 2

22 Sep 2014

3040-01-631-3932
Mechanical Drive Housing

016313932
40-637-4204: RNCC: 3 | RNVC: 2

11 Sep 2014

3040-01-631-3621
Hub Clamp

016313621
585-5489226 ITEM 1: RNCC: 3 | RNVC: 2
585-5489226: RNCC: D | RNVC: 9

10 Sep 2014

3040-01-631-3511
Manual Control Lever

016313511
7386768: RNCC: 3 | RNVC: 2
7386768: RNCC: 5 | RNVC: 2

10 Sep 2014

3040-01-631-3342
Shouldered Shaft

016313342
T0017-M004: RNCC: 3 | RNVC: 9
05-1LA-5X3XGF-3MG REV F, IT 3: RNCC: 5 | RNVC: 9
05-1LA-5X3XGF-3MG: RNCC: D | RNVC: 9

10 Sep 2014

3040-01-631-3225
Shouldered Shaft

016313225
AB286422D: RNCC: 3 | RNVC: 9

9 Sep 2014

3040-01-631-2910
Differential Spider

016312910
AB282006: RNCC: 3 | RNVC: 2

8 Sep 2014

3040-01-631-2708
Shouldered Shaft Assembly

016312708
SSCY14444-400: RNCC: 3 | RNVC: 2

8 Sep 2014

3040-01-631-1977
Shouldered Shaft

016311977
726-223-001: RNCC: 3 | RNVC: 2

4 Sep 2014

3040-01-631-1757
Mechanically Actuated Spindle

016311757
167-8279345 ITEM NO 8: RNCC: 3 | RNVC: 2
167-8204846 ITEM NO 9: RNCC: C | RNVC: 1

3 Sep 2014

3040-01-631-1724
Mechanically Actuated Spindle

016311724
167-8279345 ITEM NO 6: RNCC: 3 | RNVC: 2
167-8279345 ITEM NO 6: RNCC: 3 | RNVC: 9
167-8204846 ITEM NO 14: RNCC: C | RNVC: 1

3 Sep 2014

3040-01-631-1043
Bell Crank Support

016311043
2-73886-1: RNCC: 3 | RNVC: 2

29 Aug 2014

3040-01-631-0527
Control Cam

016310527
17A4582P13: RNCC: 3 | RNVC: 2

27 Aug 2014

3040-01-631-0178
Shouldered Shaft

016310178
17A4582P20: RNCC: 3 | RNVC: 2

26 Aug 2014

3040-01-630-9707
Rigid Connecting Link

016309707
128GT10127-219: RNCC: 3 | RNVC: 2
128GT10127-219: RNCC: 5 | RNVC: 9

25 Aug 2014

3040-01-630-9719
Hose Reel Brake Wheel Assembly

016309719
4344181: RNCC: 3 | RNVC: 2
4344181: RNCC: 3 | RNVC: 9
4344181: RNCC: 5 | RNVC: 2

25 Aug 2014

3040-01-630-9703
Rigid Connecting Link

016309703
128GT10127-13: RNCC: 3 | RNVC: 2
128GT10127-13: RNCC: 5 | RNVC: 9
128GT10127-13: RNCC: 5 | RNVC: 9

25 Aug 2014

3040-01-630-9699
Rigid Connecting Link

016309699
128GT10127-215: RNCC: 3 | RNVC: 2
128GT10127-215: RNCC: 5 | RNVC: 2
128GT10127-215: RNCC: 5 | RNVC: 9

25 Aug 2014

3040-01-630-9672
Rigid Connecting Link

016309672
128GT10127-11: RNCC: 3 | RNVC: 2
128GT10127-11: RNCC: 5 | RNVC: 9

25 Aug 2014

3040-01-630-9614
Linear Actuating Cylinder Assembly

016309614
60NII102: RNCC: 3 | RNVC: 2
012417: RNCC: 5 | RNVC: 2

25 Aug 2014

3040-01-630-9436
Remote Control Lever

016309436
4L5994-2: RNCC: 3 | RNVC: 2

25 Aug 2014

3040-01-630-9347
Pneumatic Actuator Cylinder Housing

016309347
54431: RNCC: 3 | RNVC: 2

22 Aug 2014

3040-01-630-8910
Rigid Connecting Link

016308910
4002-0048-1: RNCC: 3 | RNVC: 2

21 Aug 2014

3040-01-630-7916
Right Plate Assy

016307916
19593: RNCC: 3 | RNVC: 2
19593: RNCC: 3 | RNVC: 9

19 Aug 2014

3040-01-630-7912
Left Plate Assy

016307912
19592: RNCC: 3 | RNVC: 2
19592: RNCC: 3 | RNVC: 9

19 Aug 2014

3040-01-630-7699
Straight Axle

016307699
122081-181: RNCC: 3 | RNVC: 2

18 Aug 2014

3040-01-630-7635
Shouldered Shaft

016307635
2155-0246-1: RNCC: 3 | RNVC: 2

18 Aug 2014

3040-01-630-7246
Rotating Shaft Eye Bracket

016307246
12556918: RNCC: 3 | RNVC: 2

15 Aug 2014

3040-01-630-6610
Mechanically Actuated Spindle

016306610
167-7569488 PC 56: RNCC: 3 | RNVC: 2

13 Aug 2014

3040-01-630-6527
Manual Control Lever Assembly

016306527
7555490-P2: RNCC: 3 | RNVC: 2

13 Aug 2014

3040-01-630-6499
Manual Control Lever Assembly

016306499
4111-0029-1: RNCC: 3 | RNVC: 2

13 Aug 2014

3040-01-630-6378
Nonvehicular Propeller Shaft

016306378
205675-00: RNCC: 3 | RNVC: 2
205675-00 REV D: RNCC: 5 | RNVC: 2

12 Aug 2014

3040-01-630-6337
Pedal Pad

016306337
88SN1-05: RNCC: 3 | RNVC: 2

12 Aug 2014

3040-01-630-5846
Rigid Connecting Link

016305846
24613-ZY3-000: RNCC: 3 | RNVC: 9

11 Aug 2014

3040-01-630-5687
Impact Limiter

016305687
111E3074-ITEM1: RNCC: 3 | RNVC: 1

9 Aug 2014

3040-01-630-5686
Impact Limiter

016305686
111E3074-ITEM2: RNCC: 3 | RNVC: 1

9 Aug 2014

3040-01-630-5685
Impact Limiter Assy

016305685
111E3068-GP1: RNCC: 3 | RNVC: 1

9 Aug 2014

3040-01-630-5682
Upper Pivot Bloc A

016305682
186D1129-GP1: RNCC: 3 | RNVC: 1

9 Aug 2014

3040-01-630-5550
Linear Actuating Cylinder Piston

016305550
4H000002251: RNCC: 3 | RNVC: 2
4H000002251: RNCC: 5 | RNVC: 2

8 Aug 2014

3040-01-630-5275
Shouldered Shaft

016305275
2155-0246-2: RNCC: 3 | RNVC: 2

7 Aug 2014

3040-01-630-5273
Shouldered Shaft

016305273
4L5555-1: RNCC: 3 | RNVC: 2

7 Aug 2014

3040-01-630-5106
Counterbalance Weight

016305106
72B-9701-12: RNCC: 3 | RNVC: 2

6 Aug 2014

3040-01-630-4741
Shaft Collar

016304741
2N008: RNCC: 3 | RNVC: 2
60485K65: RNCC: 5 | RNVC: 2

5 Aug 2014

3040-01-630-4649
Straight Shaft

016304649
752-7068422-374: RNCC: 3 | RNVC: 2
H832-0310-374: RNCC: 5 | RNVC: 2
H8320350A17A-1: RNCC: 5 | RNVC: 2

5 Aug 2014

3040-01-630-3090
Linear Actuating Cylinder Assembly

016303090
AGSE-E22205-S02: RNCC: 3 | RNVC: 2

31 Jul 2014

3040-01-630-2461
Counterbalance Weight

016302461
14001147: RNCC: 3 | RNVC: 2
14001147: RNCC: 3 | RNVC: 9

30 Jul 2014

3040-01-630-2217
Shouldered Shaft

016302217
320AS313-1: RNCC: 3 | RNVC: 2

29 Jul 2014

3040-01-630-1661
Rotary Actuating Cylinder Assembly

016301661
R902435271: RNCC: 3 | RNVC: 2

28 Jul 2014

3040-01-630-1657
Rotary Actuating Cylinder Assembly

016301657
R902435257: RNCC: 3 | RNVC: 2

28 Jul 2014

3040-01-630-1445
Remote Control Lever

016301445
3654AS5920-2: RNCC: 3 | RNVC: 2

25 Jul 2014

3040-01-630-1211
Linear Actuating Cylinder Assembly

016301211
MVS02416: RNCC: 3 | RNVC: 2

25 Jul 2014

3040-01-630-1195
Linear Actuating Cylinder Assembly

016301195
32ANCHDBTVS8AX60.00: RNCC: 3 | RNVC: 2

25 Jul 2014

3040-01-630-1186
Linear Actuating Cylinder Assembly

016301186
MVS02412: RNCC: 3 | RNVC: 2

25 Jul 2014

3040-01-630-0961
Nonrotating Shaft Eye Bracket

016300961
2011A0802: RNCC: 3 | RNVC: 2

24 Jul 2014

3040-01-630-0714
Manual Control Lever Assembly

016300714
MTM-10986: RNCC: 3 | RNVC: 2
12522325: RNCC: 7 | RNVC: 2

24 Jul 2014

3040-01-630-0291
Shouldered Shaft Assembly

016300291
4155-0031-1: RNCC: 3 | RNVC: 2

23 Jul 2014

3040-01-629-9043
Brake Shoe

016299043
AE9FA00810007: RNCC: 3 | RNVC: 2
30HD PG 46-1 REF 16: RNCC: 5 | RNVC: 2

18 Jul 2014

3040-01-629-8442
Linear Actuating Cylinder Assembly

016298442
32ANCHDBTV8AX60.00: RNCC: 3 | RNVC: 2
MVS02440: RNCC: 5 | RNVC: 2

16 Jul 2014

3040-01-629-7792
Rigid Connecting Link

016297792
5217-063: RNCC: 3 | RNVC: 2

15 Jul 2014

3040-01-629-7604
Planetary Gears Carrier

016297604
29537927: RNCC: 3 | RNVC: 2

14 Jul 2014

3040-01-629-7572
Straight Shaft

016297572
244-8203455 AY98 ITEM NO 11: RNCC: 3 | RNVC: 2

14 Jul 2014

3040-01-629-7563
Straight Shaft

016297563
244-8203455 AY98 ITEM NO 13: RNCC: 3 | RNVC: 2

14 Jul 2014

3040-01-629-7551
Straight Shaft

016297551
244-8203455 AY98 ITEM NO 10: RNCC: 3 | RNVC: 2

14 Jul 2014

3040-01-629-7380
Linear Actuating Cylinder Assembly

016297380
MVS02414: RNCC: 3 | RNVC: 2

14 Jul 2014

3040-01-629-7134
Rigid Connecting Link

016297134
3654AS5912-1: RNCC: 3 | RNVC: 2

11 Jul 2014

3040-01-629-6833
Mechanically Actuated Spindle

016296833
MVS04817: RNCC: 3 | RNVC: 2

10 Jul 2014

3040-01-629-6834
Mechanically Actuated Spindle

016296834
MVS04823: RNCC: 3 | RNVC: 2

10 Jul 2014

3040-01-629-6267
Shouldered Shaft

016296267
38456: RNCC: 3 | RNVC: 2

9 Jul 2014

3040-01-629-6096
Rigid Connecting Link

016296096
89314: RNCC: 3 | RNVC: 2

9 Jul 2014

3040-01-629-5860
Straight Shaft

016295860
35522: RNCC: 3 | RNVC: 2

8 Jul 2014

3040-01-629-5733
Rigid Connecting Link

016295733
3654AS8731-2: RNCC: 3 | RNVC: 2

8 Jul 2014

3040-01-629-5639
Straight Shaft

016295639
LS1097628: RNCC: 3 | RNVC: 2

7 Jul 2014

3040-01-629-5624
Linear Actuating Cylinder

016295624
MVS02415: RNCC: 3 | RNVC: 2

7 Jul 2014

3040-01-629-5617
Straight Shaft

016295617
LS1097627: RNCC: 3 | RNVC: 2

7 Jul 2014

3040-01-629-5536
Straight Shaft

016295536
LS1097631: RNCC: 3 | RNVC: 2

7 Jul 2014

3040-01-629-5411
Interface Plate

016295411
12574977: RNCC: 3 | RNVC: 2

7 Jul 2014

3040-01-629-5142
Friction Lining

016295142
F135791: RNCC: 3 | RNVC: 2
F135753 ITEM 19: RNCC: C | RNVC: 1
F135773 ITEM 19: RNCC: C | RNVC: 1

3 Jul 2014

3040-01-629-4766
Shouldered Shaft

016294766
3896045: RNCC: 3 | RNVC: 2

2 Jul 2014

3040-01-629-4608
Manual Control Lever Assembly

016294608
5203-051-BLK: RNCC: 3 | RNVC: 2

1 Jul 2014

3040-01-629-4578
Straight Shaft

016294578
LS1097620: RNCC: 3 | RNVC: 2

1 Jul 2014

3040-01-629-4426
Remote Control Lever

016294426
3654AS8736-1: RNCC: 3 | RNVC: 2

30 Jun 2014

3040-01-629-4416
Remote Control Lever

016294416
3654AS8737-1: RNCC: 3 | RNVC: 2

30 Jun 2014

3040-01-629-4411
Remote Control Lever

016294411
3654AS8737-2: RNCC: 3 | RNVC: 2

30 Jun 2014

3040-01-629-4407
Remote Control Lever

016294407
3654AS8733-1: RNCC: 3 | RNVC: 2

30 Jun 2014

3040-01-629-3835
Housing Adapter

016293835
RE528649: RNCC: 3 | RNVC: 9
RE528649: RNCC: 5 | RNVC: 2

27 Jun 2014

3040-01-629-3760
Mechanical Drive Housing

016293760
B-800-20039M510D: RNCC: 3 | RNVC: 2

27 Jun 2014

3040-01-629-3628
Shaft Collar

016293628
LS1097619: RNCC: 3 | RNVC: 2

26 Jun 2014

3040-01-629-3084
Bevel Gear And Shaft Assembly

016293084
2P64526001-1: RNCC: 3 | RNVC: 2

25 Jun 2014

3040-01-629-3081
Mechanical Drive Housing

016293081
2R44401012-3: RNCC: 3 | RNVC: 2

25 Jun 2014

3040-01-629-3080
Mechanical Drive Housing

016293080
2R44401011-3: RNCC: 3 | RNVC: 2

25 Jun 2014

3040-01-629-3049
Nonrotating Shaft Eye Bracket

016293049
5822/2-999-000: RNCC: 3 | RNVC: 2
E0500 ITEM 23: RNCC: C | RNVC: 1

25 Jun 2014

3040-01-629-2523
Linear Actuating Cylinder Assembly Parts Kit

016292523
4999-9078: RNCC: 3 | RNVC: 2

24 Jun 2014

3040-01-629-2487
Extension Shaft

016292487
4999-9070: RNCC: 3 | RNVC: 2

24 Jun 2014

3040-01-629-2478
Linear Actuating Cylinder Assembly Parts Kit

016292478
A-KX22403: RNCC: 3 | RNVC: 2
22403 ITEMS 10 THRU 21: RNCC: C | RNVC: 1

24 Jun 2014

3040-01-629-2440
Mechanically Actuated Spindle

016292440
MVS05227: RNCC: 3 | RNVC: 2

23 Jun 2014

3040-01-629-2416
Shaft Collar

016292416
752-7068422-130: RNCC: 3 | RNVC: 2
H832-0350-64: RNCC: 5 | RNVC: 2
H832-0310-130: RNCC: 5 | RNVC: 2

23 Jun 2014

3040-01-629-2419
Straight Shaft

016292419
752-7068422-231: RNCC: 3 | RNVC: 2
H832-0310-231: RNCC: 5 | RNVC: 2

23 Jun 2014

3040-01-629-2245
Shaft Collar

016292245
9633T28: RNCC: 3 | RNVC: 2
9633T28: RNCC: 5 | RNVC: 2

23 Jun 2014

3040-01-629-1297
Mechanically Actuated Spindle

016291297
15660157: RNCC: 3 | RNVC: 2
167-7619282 ITEM NO 28: RNCC: C | RNVC: 1
167-8279345 ITEM NO 5: RNCC: C | RNVC: 1

19 Jun 2014

3040-01-629-0202
Spur Gearshaft

016290202
F083001: RNCC: 3 | RNVC: 2
F082203 ITEM 29: RNCC: 5 | RNVC: 2

17 Jun 2014

3040-01-629-0104
Spur Gearshaft

016290104
F082911: RNCC: 3 | RNVC: 2
F083263 ITEM 20: RNCC: 5 | RNVC: 2

17 Jun 2014

3040-01-629-0060
Spur Gearshaft

016290060
F083241: RNCC: 3 | RNVC: 2
F083263 ITEM 32: RNCC: 5 | RNVC: 2

17 Jun 2014

3040-01-629-0017
Marine Gear Nrp

016290017
ZF 2060: RNCC: 3 | RNVC: 2

17 Jun 2014

3040-01-629-0001
Spur Gearshaft

016290001
F083031: RNCC: 3 | RNVC: 2
F082203 ITEM 32: RNCC: 5 | RNVC: 2

17 Jun 2014

3040-01-628-9774
Rigid Connecting Link

016289774
124-7386936 PC 30: RNCC: 3 | RNVC: 2
124-7386972 PC 59: RNCC: 5 | RNVC: 2

16 Jun 2014

3040-01-628-9779
Bell Crank

016289779
124-7386936 PC 34: RNCC: 3 | RNVC: 2
124-7386972 PC 63: RNCC: 5 | RNVC: 2

16 Jun 2014

3040-01-628-9555
Manual Control Lever

016289555
335191: RNCC: 3 | RNVC: 2

16 Jun 2014

3040-01-628-9090
Shouldered Shaft

016289090
RE502447: RNCC: 3 | RNVC: 2
RE502447: RNCC: 5 | RNVC: 2

13 Jun 2014

3040-01-628-9072
Shouldered Shaft

016289072
RE502446: RNCC: 3 | RNVC: 2
RE502446: RNCC: 5 | RNVC: 2

13 Jun 2014

3040-01-628-8919
Shaft Collar

016288919
PG-5120-00: RNCC: 3 | RNVC: 2

12 Jun 2014

3040-01-628-8038
Brake Drum

016288038
T001412526PP: RNCC: 3 | RNVC: 2
V8300500PP 20: RNCC: 5 | RNVC: 2
V8300500PP: RNCC: D | RNVC: 9

10 Jun 2014

3040-01-628-7786
Piston Ring

016287786
12283002: RNCC: 3 | RNVC: 2

10 Jun 2014

3040-01-628-7749
Mechanically Actuated Spindle

016287749
167-7619281 ITEM 14: RNCC: 3 | RNVC: 2
167-8200543 ITEM 42: RNCC: 5 | RNVC: 2

10 Jun 2014

3040-01-628-7562
Shouldered Shaft

016287562
1708341: RNCC: 3 | RNVC: 2

9 Jun 2014

3040-01-628-7044
Linear Actuating Cylinder Assembly

016287044
0619C03-0658-01: RNCC: 3 | RNVC: 2
0619-00-0060-20 ITEM NO 169: RNCC: 5 | RNVC: 2
22403: RNCC: 5 | RNVC: 2

6 Jun 2014

3040-01-628-6852
Shouldered Shaft

016286852
1708365: RNCC: 3 | RNVC: 2

5 Jun 2014

3040-01-628-6819
Pawl

016286819
RP-375: RNCC: 3 | RNVC: 9

5 Jun 2014

3040-01-628-6528
Hose Reel Brake Wheel Assembly

016286528
T001312974PP: RNCC: 3 | RNVC: 2
V8300500PP ITEM 23: RNCC: 5 | RNVC: 2
V8300500PP: RNCC: D | RNVC: 9

4 Jun 2014

3040-01-628-6060
Straight Shaft

016286060
H525-7207-78: RNCC: 3 | RNVC: 1
501-7108142-77: RNCC: 5 | RNVC: 1
501-7108142-77L1: RNCC: 5 | RNVC: 2
H525-7207-78L1: RNCC: 5 | RNVC: 2

3 Jun 2014

3040-01-628-5869
Breather

016285869
934332T: RNCC: 3 | RNVC: 2
BOM N25-02309-A POS NR 216: RNCC: 5 | RNVC: 2
DAAK105756 POS NR 216: RNCC: 5 | RNVC: 2

2 Jun 2014

3040-01-628-5827
Shouldered Shaft

016285827
8288012: RNCC: 3 | RNVC: 2

2 Jun 2014

3040-01-628-5814
Rigid Connecting Link

016285814
8288016: RNCC: 3 | RNVC: 2

2 Jun 2014

3040-01-628-5802
Detent Plate

016285802
8288027: RNCC: 3 | RNVC: 2

2 Jun 2014

3040-01-628-5649
Linear Actuating Cylinder Assembly

016285649
6211K479: RNCC: 3 | RNVC: 9
6211K479: RNCC: 5 | RNVC: 2
6211K479: RNCC: 5 | RNVC: 9

2 Jun 2014

3040-01-628-5567
Mechanically Actuated Spindle

016285567
167-7619282 ITEM NO 21: RNCC: 3 | RNVC: 2
167-8279345 ITEM NO 7: RNCC: 5 | RNVC: 2

30 May 2014

3040-01-628-5521
Brake-Electric Nrp

016285521
1-082-652-00-019: RNCC: 3 | RNVC: 2
8-178-912-06B/1-082-652-00-019: RNCC: 5 | RNVC: 2
F109488 P/N 1-082-652-00-019: RNCC: 5 | RNVC: 2
F109488: RNCC: 5 | RNVC: 2

30 May 2014

3040-01-628-5396
Linear Actuating Cylinder Head

016285396
11185SP: RNCC: 3 | RNVC: 2

30 May 2014

3040-01-628-5278
Control Cam

016285278
U000004296: RNCC: 3 | RNVC: 2
DAAK105740 SEQ 009: RNCC: 5 | RNVC: 2
BOM PAAI000563 SEQ 009: RNCC: 5 | RNVC: 2

29 May 2014

3040-01-628-5267
Spur Gearshaft

016285267
1708342: RNCC: 3 | RNVC: 2

29 May 2014

3040-01-628-5163
Mechanically Actuated Spindle

016285163
167-7569488 PC 126: RNCC: 3 | RNVC: 2
7569488 SH 4 PC 126: RNCC: 5 | RNVC: 2

29 May 2014

3040-01-628-5018
Shaft Collar

016285018
7636417: RNCC: 3 | RNVC: 2

29 May 2014

3040-01-628-4663
Shouldered Shaft

016284663
3654AS8318-1: RNCC: 3 | RNVC: 2

28 May 2014

3040-01-628-4636
1720 Shaft Assy Nrp

016284636
DAAK007873: RNCC: 3 | RNVC: 2
DAAK014336 SEQ J21P021, J22P021: RNCC: 5 | RNVC: 2

27 May 2014

3040-01-628-4637
D370 X L7 Shaft Nrp

016284637
PAAI017129: RNCC: 3 | RNVC: 2
DAAK007873 SEQ 1: RNCC: 5 | RNVC: 2

27 May 2014

3040-01-628-4619
Straight Shaft

016284619
3654AS8315-1: RNCC: 3 | RNVC: 2

27 May 2014

3040-01-628-4517
Shouldered Shaft

016284517
3645AS8316-1: RNCC: 3 | RNVC: 2

27 May 2014

3040-01-628-4314
Straight Shaft

016284314
501-7066654-52: RNCC: 3 | RNVC: 1
H525-7616-52: RNCC: 5 | RNVC: 1
501-7066654-52L1: RNCC: 5 | RNVC: 2
H525-7616-52L1: RNCC: 5 | RNVC: 2

23 May 2014

3040-01-628-3567
Shouldered Shaft

016283567
8288029: RNCC: 3 | RNVC: 2

21 May 2014

3040-01-628-3394
Control Cam

016283394
8288011: RNCC: 3 | RNVC: 2

20 May 2014

3040-01-628-3151
Body Hub

016283151
3965361: RNCC: 3 | RNVC: 2
135677: RNCC: 5 | RNVC: 2

19 May 2014

3040-01-628-2622
Shaft-Hub Clamp-Bushing Assembly

016282622
5SE01558-1: RNCC: 3 | RNVC: 2

16 May 2014

3040-01-628-2612
Linear Actuating Cylinder

016282612
MJA-1035: RNCC: 3 | RNVC: 2
MJA-1039: RNCC: 5 | RNVC: 2

16 May 2014

3040-01-628-2495
Mechanically Actuated Spindle

016282495
167-8200543: RNCC: 3 | RNVC: 2
167-8278258: RNCC: 5 | RNVC: 2

15 May 2014

3040-01-628-2029
Linear Actuating Cylinder Assembly

016282029
0619C03-0658-02: RNCC: 3 | RNVC: 2
0619-00-0060-20 ITEM 170: RNCC: 5 | RNVC: 2

14 May 2014

3040-01-628-2022
Remote Control Lever

016282022
6CE-44120-10-00: RNCC: 3 | RNVC: 2

14 May 2014

3040-01-628-1865
Shouldered Shaft Assembly

016281865
042915: RNCC: 3 | RNVC: 2

13 May 2014

3040-01-628-1622
Control Cam

016281622
X8102: RNCC: 3 | RNVC: 2

13 May 2014

3040-01-628-1611
Remote Control Lever

016281611
6CE-44121-00-00: RNCC: 3 | RNVC: 2

13 May 2014

3040-01-628-1294
Multiple Gears Gearshaft

016281294
42592-74: RNCC: 3 | RNVC: 2

9 May 2014

3040-01-628-1291
Multiple Gears Gearshaft

016281291
42592-58: RNCC: 3 | RNVC: 2

9 May 2014

3040-01-628-1292
Multiple Gears Gearshaft

016281292
42592-73: RNCC: 3 | RNVC: 2

9 May 2014

3040-01-628-1288
Multiple Gears Gearshaft

016281288
42592-83: RNCC: 3 | RNVC: 2

9 May 2014

3040-01-628-1274
Rigid Connecting Link

016281274
51991-32.3: RNCC: 3 | RNVC: 2

9 May 2014

3040-01-628-0696
Shouldered Shaft

016280696
FA1667: RNCC: 3 | RNVC: 2

7 May 2014

3040-01-628-0565
Mechanical Drive Housing

016280565
FA1670: RNCC: 3 | RNVC: 2

7 May 2014

3040-01-627-9666
Linear Actuating Cylinder Assembly

016279666
PAAI063018: RNCC: 3 | RNVC: 2
PAAI063018: RNCC: 3 | RNVC: 2
6507196: RNCC: 5 | RNVC: 9
2-26781-B: RNCC: D | RNVC: 9

5 May 2014

3040-01-627-9667
Mechanical Drive Housing Part

016279667
FA1666: RNCC: 3 | RNVC: 2

5 May 2014

3040-01-627-9576
Mechanical Transmission Housing Part

016279576
FP3642: RNCC: 3 | RNVC: 2

5 May 2014

3040-01-627-9334
Worm Shaft

016279334
15485919: RNCC: 3 | RNVC: 2
244-8203455 AY98 ITEM NO 4: RNCC: 5 | RNVC: 2
244-8203455 AY99 ITEM NO 4: RNCC: 5 | RNVC: 2

2 May 2014

3040-01-627-9111
Mechanical Drive Housing

016279111
41100-ZY3-C13ZB: RNCC: 3 | RNVC: 9

1 May 2014

3040-01-627-8800
Rigid Connecting Link

016278800
6CE-44100-00-00: RNCC: 3 | RNVC: 2

30 Apr 2014

3040-01-627-8740
Mechanical Drive Housing Part

016278740
FP3643: RNCC: 3 | RNVC: 2

30 Apr 2014

3040-01-627-8632
Manual Control Lever

016278632
PG-5057-00: RNCC: 3 | RNVC: 2

30 Apr 2014

3040-01-627-8611
Shouldered Shaft

016278611
PG-5099-01: RNCC: 3 | RNVC: 2

30 Apr 2014

3040-01-627-8606
Shouldered Shaft

016278606
FA1654: RNCC: 3 | RNVC: 2

30 Apr 2014

3040-01-627-8569
Linear Actuating Cylinder

016278569
UC128OBF-1P: RNCC: 3 | RNVC: 2
UC128P-OBF/1: RNCC: 3 | RNVC: 9
UC128-0BF-IP: RNCC: 5 | RNVC: 9

30 Apr 2014

3040-01-627-8564
Shouldered Shaft

016278564
5023101: RNCC: 3 | RNVC: 2

30 Apr 2014

3040-01-627-8563
Manual Control Lever

016278563
FA1659: RNCC: 3 | RNVC: 2

30 Apr 2014

3040-01-627-8006
Straight Shaft

016278006
15485926: RNCC: 3 | RNVC: 2
244-8203455 AY99 ITEM NO 11: RNCC: 5 | RNVC: 2

28 Apr 2014

3040-01-627-8002
Straight Shaft

016278002
15485922: RNCC: 3 | RNVC: 2
244-8203455 AY98 ITEM NO 7: RNCC: 5 | RNVC: 2
244-8203455 AY99 ITEM NO 7: RNCC: 5 | RNVC: 2

28 Apr 2014

3040-01-627-7985
Straight Shaft

016277985
15485925: RNCC: 3 | RNVC: 2
244-8203455 AY99 ITEM NO 10: RNCC: 5 | RNVC: 2

28 Apr 2014

3040-01-627-7982
Straight Shaft

016277982
15485928: RNCC: 3 | RNVC: 2
244-8203455 AY99 ITEM NO 13: RNCC: 5 | RNVC: 2

28 Apr 2014

3040-01-627-7974
Remote Control Lever

016277974
564-7108143-A4: RNCC: 3 | RNVC: 2
H525-7208-A4: RNCC: 5 | RNVC: 2

28 Apr 2014

3040-01-627-7539
Rigid Connecting Link

016277539
892789Q22: RNCC: 3 | RNVC: 2
892789Q02: RNCC: 5 | RNVC: 9

25 Apr 2014

3040-01-627-7244
Spur Gearshaft

016277244
6CE-45501-10-00: RNCC: 3 | RNVC: 2

24 Apr 2014

3040-01-627-6859
Shouldered Shaft

016276859
300240-2-2: RNCC: 3 | RNVC: 1
301308ITEM4: RNCC: 5 | RNVC: 1

23 Apr 2014

3040-01-627-6839
Shouldered Shaft

016276839
300034-1-2: RNCC: 3 | RNVC: 1
301308ITEM4: RNCC: 5 | RNVC: 1

23 Apr 2014

3040-01-627-6833
Shouldered Shaft

016276833
300046-1-2: RNCC: 3 | RNVC: 1
301308ITEM3: RNCC: 5 | RNVC: 1

23 Apr 2014

3040-01-627-6820
Shouldered Shaft

016276820
300240-1-2: RNCC: 3 | RNVC: 1

23 Apr 2014

3040-01-627-6816
Shouldered Shaft

016276816
300191-1-2: RNCC: 3 | RNVC: 1
301308ITEM3: RNCC: 5 | RNVC: 1

23 Apr 2014

3040-01-627-6807
Shouldered Shaft

016276807
300034-2-2: RNCC: 3 | RNVC: 1
301308ITEM4: RNCC: 5 | RNVC: 1

23 Apr 2014

3040-01-627-6804
Shouldered Shaft

016276804
300046-3-2: RNCC: 3 | RNVC: 1
301308ITEM3: RNCC: 5 | RNVC: 1

23 Apr 2014

3040-01-627-6755
Piston Rod Ring

016276755
243-7670410 ITEM NO. 4: RNCC: 3 | RNVC: 2

23 Apr 2014

3040-01-627-6541
Shouldered Shaft

016276541
5019702: RNCC: 3 | RNVC: 2

22 Apr 2014

3040-01-627-6488
Mechanical Drive Housing

016276488
1806000: RNCC: 3 | RNVC: 2

22 Apr 2014

3040-01-627-5623
Shouldered Shaft

016275623
0619-03-0413-07: RNCC: 3 | RNVC: 2
0619-03-0437-03 ITEM NO 3: RNCC: 5 | RNVC: 2

17 Apr 2014

3040-01-627-5591
Linear Actuating Cylinder Assembly

016275591
PAAI061728: RNCC: 3 | RNVC: 2

17 Apr 2014

3040-01-627-5574
Linear Actuating Cylinder Assembly

016275574
PAAI061731: RNCC: 3 | RNVC: 2

17 Apr 2014

3040-01-627-5559
Linear Actuating Cylinder Assembly

016275559
PAAI063024: RNCC: 3 | RNVC: 2

17 Apr 2014

3040-01-627-5478
Body Hub

016275478
5-16-2108-00-03N: RNCC: 3 | RNVC: 2

17 Apr 2014

3040-01-627-5108
Housing Adapter

016275108
PG-5109-00: RNCC: 3 | RNVC: 2

16 Apr 2014

3040-01-627-5048
Housing Adapter

016275048
FP3599: RNCC: 3 | RNVC: 2

16 Apr 2014

3040-01-627-4965
Shouldered Shaft

016274965
FA1651: RNCC: 3 | RNVC: 2

16 Apr 2014

3040-01-627-4817
Helical Gearshaft

016274817
PG-5089-00: RNCC: 3 | RNVC: 2

15 Apr 2014

3040-01-627-4759
Mechanical Drive Housing

016274759
PG-5082-00: RNCC: 3 | RNVC: 2

15 Apr 2014

3040-01-627-4736
Shouldered Shaft

016274736
FA1652: RNCC: 3 | RNVC: 2

15 Apr 2014

3040-01-627-4721
Shouldered Shaft

016274721
PG-5042-00: RNCC: 3 | RNVC: 2

15 Apr 2014

3040-01-627-4672
Shouldered Shaft

016274672
09A-50419: RNCC: 3 | RNVC: 2
93-2422: RNCC: 3 | RNVC: 9
189-1271: RNCC: 5 | RNVC: 9
93-2422: RNCC: 5 | RNVC: 9

15 Apr 2014

3040-01-627-4185
Shouldered Shaft

016274185
PG-5085-00: RNCC: 3 | RNVC: 2

14 Apr 2014

3040-01-627-3020
Rotary Actuating Cylinder Assembly

016273020
RCS850 12A: RNCC: 3 | RNVC: 2
10668748-001PW: RNCC: 5 | RNVC: 2

9 Apr 2014

3040-01-627-2375
Spur Gearshaft

016272375
83730-1: RNCC: 3 | RNVC: 2
83775-(D) ITEM 17 P/N 83730-1: RNCC: 5 | RNVC: 2

7 Apr 2014

3040-01-627-1672
Straight Shaft Assembly

016271672
125329B12: RNCC: 3 | RNVC: 2

3 Apr 2014

3040-01-627-0724
Shouldered Axle

016270724
752-7068513-59: RNCC: 3 | RNVC: 2
H832-1691-59: RNCC: 5 | RNVC: 2

1 Apr 2014

3040-01-627-0281
Bell Crank

016270281
D114703-501: RNCC: 3 | RNVC: 2
D114703-501: RNCC: 3 | RNVC: 9

29 Mar 2014

3040-01-627-0106
Straight Shaft

016270106
5266032: RNCC: 3 | RNVC: 2

28 Mar 2014

3040-01-626-9165
Brake Drum

016269165
15850: RNCC: 3 | RNVC: 2
15850: RNCC: 3 | RNVC: 9

25 Mar 2014

3040-01-626-8881
Straight Shaft

016268881
596-7551454-1: RNCC: 3 | RNVC: 2
596-7411276-17: RNCC: 3 | RNVC: 2
B553-9200-17: RNCC: 5 | RNVC: 2
B553-9212-1: RNCC: 5 | RNVC: 2

24 Mar 2014

3040-01-626-8348
Straight Shaft

016268348
596-7551454-6: RNCC: 3 | RNVC: 2
596-7411276-20: RNCC: 5 | RNVC: 1
B553-9200-20: RNCC: 5 | RNVC: 1
B553-9212-6: RNCC: 5 | RNVC: 2

21 Mar 2014

3040-01-626-8317
Straight Shaft

016268317
596-7551454-5: RNCC: 3 | RNVC: 2
596-7411276-22: RNCC: 5 | RNVC: 1
B553-9200-22: RNCC: 5 | RNVC: 1
B553-9212-5: RNCC: 5 | RNVC: 2

21 Mar 2014

3040-01-626-8209
Straight Shaft

016268209
596-7551454-4: RNCC: 3 | RNVC: 2
596-7411276-12: RNCC: 5 | RNVC: 2
B553-9212-4: RNCC: 5 | RNVC: 2
B553-9200-12: RNCC: 5 | RNVC: 2

21 Mar 2014

3040-01-626-8160
Straight Shaft

016268160
596-7411276-16: RNCC: 3 | RNVC: 2
596-7551454-2: RNCC: 3 | RNVC: 2
B553-9200-16: RNCC: 5 | RNVC: 2
B553-9212-2: RNCC: 5 | RNVC: 2

20 Mar 2014

3040-01-626-8148
Straight Shaft

016268148
596-7411276-14: RNCC: 3 | RNVC: 2
596-7551454-3: RNCC: 3 | RNVC: 2
B553-9200-14: RNCC: 5 | RNVC: 2
B553-9212-3: RNCC: 5 | RNVC: 2

20 Mar 2014

3040-01-626-6749
Ballscrew Assembly

016266749
2688171: RNCC: 1 | RNVC: 2
BA22355: RNCC: 3 | RNVC: 2

19 Mar 2014

3040-01-626-6320
Tension Spring Assembly

016266320
EA002221-001: RNCC: 3 | RNVC: 2

18 Mar 2014

3040-01-626-6316
Pressure Regulator Shaft And Spring Assembly

016266316
E90717-002: RNCC: 3 | RNVC: 2

18 Mar 2014

3040-01-626-5740
Shouldered Shaft

016265740
16172: RNCC: 3 | RNVC: 2

14 Mar 2014

3040-01-626-5687
Shaft Collar

016265687
C-5255: RNCC: 3 | RNVC: 9
90-121-4 ITEM 42: RNCC: 5 | RNVC: 9

14 Mar 2014

3040-01-626-5665
Body Hub

016265665
8475530: RNCC: 3 | RNVC: 2

14 Mar 2014

3040-01-626-4894
Linear Actuating Cylinder Assembly

016264894
26KP736: RNCC: 3 | RNVC: 2
26KP736: RNCC: 5 | RNVC: 9

12 Mar 2014

3040-01-626-4733
Nonaircraft Mechanical Actuator

016264733
BRS 3030-11: RNCC: 3 | RNVC: 2

11 Mar 2014

3040-01-626-4633
Linear Actuating Cylinder Assembly Parts Kit

016264633
KTK-1059: RNCC: 3 | RNVC: 2
KTK-1059: RNCC: 5 | RNVC: 2

11 Mar 2014

3040-01-626-4512
Manual Control Lever

016264512
690705: RNCC: 3 | RNVC: 2
6350093 ITEM 71: RNCC: 3 | RNVC: 2
805439: RNCC: 5 | RNVC: 9

11 Mar 2014

3040-01-626-4179
Remote Control Lever

016264179
2072696: RNCC: 3 | RNVC: 2

10 Mar 2014

3040-01-626-3908
Rigid Connecting Link

016263908
4501-1205: RNCC: 3 | RNVC: 2

8 Mar 2014

3040-01-626-3891
Straight Shaft

016263891
AL-65: RNCC: 3 | RNVC: 2

7 Mar 2014

3040-01-626-3843
Shouldered Shaft

016263843
B-3000: RNCC: 3 | RNVC: 9
90-122-1 ITEM 21: RNCC: 5 | RNVC: 9

7 Mar 2014

3040-01-626-3684
Rigid Connecting Link

016263684
340-181-401-0: RNCC: 3 | RNVC: 2
340-181-401-0: RNCC: 5 | RNVC: 2

7 Mar 2014

3040-01-626-3034
Brake Backing Plate

016263034
SW37167: RNCC: 3 | RNVC: 2

5 Mar 2014

3040-01-626-2825
Shouldered Shaft

016262825
111P0500: RNCC: 3 | RNVC: 2
111P0500: RNCC: 5 | RNVC: 2

5 Mar 2014

3040-01-626-2619
Shaft Collar

016262619
19818-74150: RNCC: 3 | RNVC: 2

4 Mar 2014

3040-01-626-2531
Friction Lining

016262531
167-7384503-40: RNCC: 3 | RNVC: 2
B541-9179-40: RNCC: 5 | RNVC: 2

4 Mar 2014

3040-01-626-2356
Rigid Connecting Link

016262356
SW37171: RNCC: 3 | RNVC: 2

4 Mar 2014

3040-01-626-1418
Shouldered Shaft

016261418
B-3139: RNCC: 3 | RNVC: 9

27 Feb 2014

3040-01-626-1395
Interlock Shaft

016261395
167-7551439-28: RNCC: 3 | RNVC: 2
B541-9183-28: RNCC: 5 | RNVC: 2

27 Feb 2014

3040-01-626-1168
Hub Clamp

016261168
G-6053: RNCC: 3 | RNVC: 9
90-121-4 ITEM 11: RNCC: D | RNVC: 9

26 Feb 2014

3040-01-626-1099
Straight Shaft

016261099
F164038: RNCC: 3 | RNVC: 2
F134133 REV H ITEM NO. 7: RNCC: 5 | RNVC: 2

26 Feb 2014

3040-01-626-1011
Shouldered Shaft

016261011
A-23893: RNCC: 3 | RNVC: 9
90-121-4 ITEM 4: RNCC: D | RNVC: 9

26 Feb 2014

3040-01-626-0977
Shaft Idler

016260977
A-23892: RNCC: 3 | RNVC: 9
90-121-4 ITEM 13: RNCC: D | RNVC: 9

26 Feb 2014

3040-01-626-0922
Bell Crank

016260922
74A661207-1005: RNCC: 3 | RNVC: 2
10429132: RNCC: 6 | RNVC: 9

26 Feb 2014

3040-01-626-0645
Straight Shaft

016260645
S4-30: RNCC: 3 | RNVC: 9

25 Feb 2014

3040-01-626-0017
Rigid Connecting Link

016260017
123ABM10091-3: RNCC: 3 | RNVC: 2
123ABM10091-3: RNCC: 5 | RNVC: 9

24 Feb 2014

3040-01-625-9882
Worm Shaft

016259882
58572-60A: RNCC: 3 | RNVC: 2

24 Feb 2014

3040-01-625-8686
Brake Disc

016258686
1-086-622-02-WLB: RNCC: 3 | RNVC: 2

19 Feb 2014

3040-01-625-8027
Mechanically Actuated Spindle

016258027
93-30-10966A: RNCC: 3 | RNVC: 2
30-10966: RNCC: 5 | RNVC: 2

14 Feb 2014

3040-01-625-7794
Rigid Connecting Link

016257794
1308M32G03: RNCC: 3 | RNVC: 2
1308M32G03: RNCC: 5 | RNVC: 2

13 Feb 2014

3040-01-625-7644
Remote Control Lever

016257644
167-7384503-5: RNCC: 3 | RNVC: 2
B541-9179-5: RNCC: 5 | RNVC: 2

13 Feb 2014

3040-01-625-7462
Linear Actuating Cylinder Assembly

016257462
2374600: RNCC: 3 | RNVC: 9
2374600: RNCC: 5 | RNVC: 9

13 Feb 2014

3040-01-625-7236
Straight Shaft

016257236
08000765: RNCC: 3 | RNVC: 2
08000730 REV E FIND# 12: RNCC: 5 | RNVC: 2

12 Feb 2014

3040-01-625-7216
Shouldered Shaft

016257216
167-7384503-3: RNCC: 3 | RNVC: 2
B541-9179-3: RNCC: 5 | RNVC: 2

12 Feb 2014

3040-01-625-7206
Compliant Shaft

016257206
B541-9179-27: RNCC: 3 | RNVC: 2
167-7384503-27: RNCC: 5 | RNVC: 2

12 Feb 2014

3040-01-625-7172
Rigid Connecting Link

016257172
08000701: RNCC: 3 | RNVC: 2
08000526 REV E FIND 11: RNCC: 5 | RNVC: 2

12 Feb 2014

3040-01-625-7164
Lever Fitting

016257164
08000708: RNCC: 3 | RNVC: 2
08000526 REV E FIND 12: RNCC: 5 | RNVC: 2

12 Feb 2014

3040-01-625-6736
Rigid Connecting Link

016256736
12465875-3: RNCC: 3 | RNVC: 2
12465875: RNCC: D | RNVC: 9

11 Feb 2014

3040-01-625-6721
Manual Control Lever

016256721
08000744: RNCC: 3 | RNVC: 2
08000555 REV D FIND 31: RNCC: 5 | RNVC: 2

11 Feb 2014

3040-01-625-5942
Rigid Connecting Link

016255942
10080961: RNCC: 3 | RNVC: 2

7 Feb 2014

3040-01-625-5016
Breather

016255016
57XL-10-P5-N: RNCC: 3 | RNVC: 2
57XL-10-NP5: RNCC: 5 | RNVC: 9

6 Feb 2014

3040-01-625-4507
Rigid Connecting Link

016254507
1308M32G11: RNCC: 3 | RNVC: 2
1308M32G11: RNCC: 5 | RNVC: 2

4 Feb 2014

3040-01-625-3269
Shouldered Shaft

016253269
5614/6-151-000: RNCC: 3 | RNVC: 2
0513PL FIND NO 31: RNCC: 5 | RNVC: 2
0513: RNCC: D | RNVC: 9

31 Jan 2014

3040-01-625-3183
Shaft Idler

016253183
211176N: RNCC: 3 | RNVC: 2

31 Jan 2014

3040-01-625-2803
Shouldered Shaft

016252803
L-1-1/2 16.625: RNCC: 3 | RNVC: 2

30 Jan 2014

3040-01-625-2672
Shouldered Shaft

016252672
9128M35G02: RNCC: 3 | RNVC: 2

29 Jan 2014

3040-01-625-2574
Nonaircraft Mechanical Actuator

016252574
167-7108111-A3: RNCC: 3 | RNVC: 2
H547-1721-A3: RNCC: 5 | RNVC: 2

29 Jan 2014

3040-01-625-2558
Friction Lining

016252558
35560: RNCC: 3 | RNVC: 2

29 Jan 2014

3040-01-625-2381
Worm Shaft

016252381
24-0021: RNCC: 3 | RNVC: 2

29 Jan 2014

3040-01-625-2378
Worm Shaft

016252378
24-0020: RNCC: 3 | RNVC: 2

29 Jan 2014

3040-01-625-2373
Worm Shaft

016252373
24-0019: RNCC: 3 | RNVC: 2

29 Jan 2014

3040-01-625-1920
Inertia Damper

016251920
6AW-13781-00-00: RNCC: 3 | RNVC: 2

28 Jan 2014

3040-01-625-1061
Linear Actuating Cylinder Piston

016251061
6CE-43810-00-00: RNCC: 3 | RNVC: 2

24 Jan 2014

3040-01-625-0879
Shouldered Shaft

016250879
379D980-03: RNCC: 3 | RNVC: 2
759J040PC148: RNCC: 5 | RNVC: 2

24 Jan 2014

3040-01-625-0895
Rigid Connecting Link

016250895
123CM13033-502: RNCC: 3 | RNVC: 2
123CM13033-502: RNCC: 5 | RNVC: 9
123CM13033: RNCC: D | RNVC: 9

24 Jan 2014

3040-01-625-0737
Bell Crank

016250737
LS1041510: RNCC: 3 | RNVC: 2

23 Jan 2014

3040-01-625-0669
Shouldered Shaft

016250669
94590: RNCC: 3 | RNVC: 2

23 Jan 2014

3040-01-625-0215
Lever Fitting

016250215
08000745: RNCC: 3 | RNVC: 2
08000516 REV D FIND NO 18: RNCC: 5 | RNVC: 2

22 Jan 2014

3040-01-625-0126
Mechanically Actuated Spindle

016250126
08000019: RNCC: 3 | RNVC: 2

22 Jan 2014

3040-01-624-9106
Rigid Connecting Link

016249106
123CM13037-501: RNCC: 3 | RNVC: 2
123CM13037-501: RNCC: 5 | RNVC: 9

17 Jan 2014

3040-01-624-9104
Rigid Connecting Link

016249104
123CM90602-21: RNCC: 3 | RNVC: 2
123CM90602-21: RNCC: 5 | RNVC: 9

17 Jan 2014

3040-01-624-9105
Rigid Connecting Link

016249105
123CM13033-501: RNCC: 3 | RNVC: 2
123CM13033-501: RNCC: 5 | RNVC: 9

17 Jan 2014

3040-01-624-9099
Rigid Connecting Link

016249099
123CM13034-1: RNCC: 3 | RNVC: 2
123CM13034-1: RNCC: 5 | RNVC: 9

17 Jan 2014

3040-01-624-9100
Rigid Connecting Link

016249100
123CM90602-7: RNCC: 3 | RNVC: 2
123CM90602-7: RNCC: 5 | RNVC: 9

17 Jan 2014

3040-01-624-9101
Rigid Connecting Link

016249101
123CM90603-25: RNCC: 3 | RNVC: 2
123CM90603-25: RNCC: 5 | RNVC: 9

17 Jan 2014

3040-01-624-9094
Rigid Connecting Link

016249094
123CM90603-13: RNCC: 3 | RNVC: 2
123CM90603-13: RNCC: 5 | RNVC: 9

17 Jan 2014

3040-01-624-9095
Rigid Connecting Link

016249095
123CM90602-3: RNCC: 3 | RNVC: 2
123CM90602-3: RNCC: 5 | RNVC: 9

17 Jan 2014

3040-01-624-9098
Rigid Connecting Link

016249098
123CM90603-17: RNCC: 3 | RNVC: 2
123CM90603-17: RNCC: 5 | RNVC: 9

17 Jan 2014

3040-01-624-9091
Rigid Connecting Link

016249091
123CM13035-1: RNCC: 3 | RNVC: 2
123CM13035-1: RNCC: 5 | RNVC: 9

17 Jan 2014

3040-01-624-9093
Rigid Connecting Link

016249093
123CM95620-1: RNCC: 3 | RNVC: 2
123CM95620-1: RNCC: 5 | RNVC: 9
123CM95620-1: RNCC: 5 | RNVC: 9

17 Jan 2014

3040-01-624-9090
Rigid Connecting Link

016249090
123CM94621-1: RNCC: 3 | RNVC: 2
123CM94621-1: RNCC: 5 | RNVC: 9

17 Jan 2014

3040-01-624-8306
Mechanically Actuated Spindle

016248306
7000AG2210-1: RNCC: 3 | RNVC: 2

16 Jan 2014

3040-01-624-8307
Mechanically Actuated Spindle

016248307
7000AG2207-1: RNCC: 3 | RNVC: 2

16 Jan 2014

3040-01-624-8234
Rigid Connecting Link

016248234
7000AG2259-1: RNCC: 3 | RNVC: 2

16 Jan 2014

3040-01-624-7963
Remote Control Lever

016247963
6CE-44120-00-00: RNCC: 3 | RNVC: 2

15 Jan 2014

3040-01-624-7793
Mechanical Power Transmission Equipment Installation Kit

016247793
BATTMK: RNCC: 3 | RNVC: 2

15 Jan 2014

3040-01-624-7783
Linear Actuating Cylinder Assembly

016247783
1001101467: RNCC: 3 | RNVC: 2

15 Jan 2014

3040-01-624-7445
Mechanically Actuated Spindle

016247445
7000AG2209-1: RNCC: 3 | RNVC: 2

14 Jan 2014

3040-01-624-6940
Shouldered Shaft

016246940
6CE-45501-00-00: RNCC: 3 | RNVC: 2

13 Jan 2014

3040-01-624-6690
Nonmetallic Damper

016246690
6CE-44533-00-00: RNCC: 3 | RNVC: 2

10 Jan 2014

3040-01-624-6525
Belt-Chain Tension Adjusting Device

016246525
6CB-11590-01-00: RNCC: 3 | RNVC: 2

10 Jan 2014

3040-01-624-6377
Rigid Connecting Link

016246377
123CM90603-21: RNCC: 3 | RNVC: 2
123CM90603-21: RNCC: 5 | RNVC: 2
123CM90603-21: RNCC: 5 | RNVC: 9

10 Jan 2014

3040-01-624-6376
Rigid Connecting Link

016246376
123CM90603-23: RNCC: 3 | RNVC: 2
123CM90603-23: RNCC: 5 | RNVC: 9

10 Jan 2014

3040-01-624-6375
Rigid Connecting Link

016246375
123CM90603-15: RNCC: 3 | RNVC: 2
123CM90603-15: RNCC: 5 | RNVC: 9

10 Jan 2014

3040-01-624-6369
Transfe Gearbox Nrp

016246369
08000529: RNCC: 3 | RNVC: 2
08000526 REV E FIND# 18: RNCC: 5 | RNVC: 2
RA310DMS 41.34:1 W/284/286TC: RNCC: 5 | RNVC: 2
2840-1: RNCC: 5 | RNVC: 2

10 Jan 2014

3040-01-624-6109
Brake Drum

016246109
7000AG2286-1: RNCC: 3 | RNVC: 2

9 Jan 2014

3040-01-624-5988
Gearbox Nrp

016245988
08000640: RNCC: 3 | RNVC: 2
K4SH-SIZE 5 71:1 RATIO MOD: RNCC: 5 | RNVC: 2

9 Jan 2014

3040-01-624-5721
Hub Clamp

016245721
7139326: RNCC: 3 | RNVC: 2

8 Jan 2014

3040-01-624-5619
Linear Actuating Cylinder Assembly

016245619
6CE-43840-00-00: RNCC: 3 | RNVC: 2

8 Jan 2014

3040-01-624-5606
Inertia Damper

016245606
6CE-44575-00-94: RNCC: 3 | RNVC: 2

8 Jan 2014

3040-01-624-5586
Inertia Damper

016245586
6CE-44555-00-94: RNCC: 3 | RNVC: 2

8 Jan 2014

3040-01-624-5580
Inertia Damper

016245580
6CE-44514-00-94: RNCC: 3 | RNVC: 2

8 Jan 2014

3040-01-624-5144
Shouldered Shaft Assembly

016245144
6CF-44150-00-00: RNCC: 3 | RNVC: 2

6 Jan 2014

3040-01-624-4539
Rigid Connecting Link

016244539
803-6397268 PC 79 MOD 316 SST: RNCC: 3 | RNVC: 2
803-6397268 PC 53 MOD 316 SST: RNCC: 5 | RNVC: 2

2 Jan 2014

3040-01-624-4534
Manual Control Lever

016244534
19-0201-11: RNCC: 3 | RNVC: 2

2 Jan 2014

3040-01-624-3255
Grease Cap

016243255
7000AG2273-1: RNCC: 3 | RNVC: 2

24 Dec 2013

3040-01-624-1995
Shouldered Shaft

016241995
275A877-1: RNCC: 3 | RNVC: 2

19 Dec 2013

3040-01-624-1809
Straight Shaft

016241809
125-LS/XX/XX/35,59/00000/M: RNCC: 3 | RNVC: 2
125-LS/XX/XX/35.59/00000/M: RNCC: 5 | RNVC: 2
H426242: RNCC: 7 | RNVC: 2

18 Dec 2013

3040-01-624-1445
Brake Disc

016241445
42357-57: RNCC: 3 | RNVC: 2

17 Dec 2013

3040-01-624-1106
Nonaircraft Mechanical Actuator

016241106
DT12SD: RNCC: 3 | RNVC: 2
0520120625 ITEM E: RNCC: 5 | RNVC: 2

16 Dec 2013

3040-01-624-0696
Counterbalance Weight

016240696
9319M30P07: RNCC: 3 | RNVC: 2

14 Dec 2013

3040-01-624-0712
Control Cam

016240712
1603132-1: RNCC: 3 | RNVC: 2

16 Dec 2013

3040-01-623-9718
Hub Clamp

016239718
8405007: RNCC: 3 | RNVC: 2

10 Dec 2013

3040-01-623-8410
Linear Actuating Cylinder

016238410
22402: RNCC: 3 | RNVC: 2
0619-00-0060-20 ITEM 15: RNCC: 5 | RNVC: 2
0619C03-0200: RNCC: 5 | RNVC: 2

4 Dec 2013

3040-01-623-8404
Linear Actuating Cylinder

016238404
22401: RNCC: 3 | RNVC: 2
0619-00-0060-20 ITEM 7: RNCC: 5 | RNVC: 2
0619C03-0150: RNCC: 5 | RNVC: 2

4 Dec 2013

3040-01-623-8287
Rigid Connecting Link

016238287
162D725110-2001: RNCC: 3 | RNVC: 2
162D725110-2001: RNCC: 5 | RNVC: 9
160D725110-21: RNCC: 5 | RNVC: 9
160D725110-21: RNCC: 5 | RNVC: 9

4 Dec 2013

3040-01-623-7851
Linear Actuating Cylinder Head

016237851
154100: RNCC: 3 | RNVC: 2

2 Dec 2013

3040-01-623-7840
Linear Actuating Cylinder

016237840
151673: RNCC: 3 | RNVC: 2

2 Dec 2013

3040-01-623-7831
Linear Actuating Cylinder

016237831
151672: RNCC: 3 | RNVC: 2

2 Dec 2013

3040-01-623-7392
Shouldered Shaft

016237392
62199A: RNCC: 3 | RNVC: 2

27 Nov 2013

3040-01-623-7379
Linear Actuating Cylinder Piston Rod

016237379
12353562: RNCC: 3 | RNVC: 2

27 Nov 2013

3040-01-623-7281
Shouldered Shaft

016237281
7550477-G5472101-0106: RNCC: 3 | RNVC: 1
G547-0001-G5472101-0106: RNCC: 5 | RNVC: 1
G547-2101 PN 106: RNCC: 5 | RNVC: 1
G5472101-0106: RNCC: 5 | RNVC: 1
7384567 PN 106: RNCC: 5 | RNVC: 1
7384567 PN 106D4: RNCC: 5 | RNVC: 2
7550477-G5472101-0106D4: RNCC: 5 | RNVC: 2
G5472101-0106D4: RNCC: 5 | RNVC: 2
G547-0001-G5472101-0106D4: RNCC: 5 | RNVC: 2
G547-2101 PN 106D4: RNCC: 5 | RNVC: 2

27 Nov 2013

3040-01-623-7258
Rigid Connecting Link

016237258
162D725110-2003: RNCC: 3 | RNVC: 2
162D725110-2003: RNCC: 5 | RNVC: 2
160D725110-25: RNCC: 5 | RNVC: 2
160D725110-25: RNCC: 5 | RNVC: 9

27 Nov 2013

3040-01-623-6727
Linear Actuating Cylinder Assembly

016236727
MP-0015501T: RNCC: 3 | RNVC: 2
100EM0228: RNCC: D | RNVC: 9

25 Nov 2013

3040-01-623-6725
Linear Actuating Cylinder Assembly

016236725
MP-0007873T: RNCC: 3 | RNVC: 9
MP-0007873T: RNCC: 5 | RNVC: 2
MP-0007873T: RNCC: 5 | RNVC: 9

25 Nov 2013

3040-01-623-6722
Linear Actuating Cylinder Assembly

016236722
MP-0015498T: RNCC: 3 | RNVC: 2
EP-0015498: RNCC: 5 | RNVC: 9
100DL0038: RNCC: 5 | RNVC: 9
100DL0038: RNCC: D | RNVC: 9

25 Nov 2013

3040-01-623-6680
Linear Actuating Cylinder Assembly

016236680
101GR0012: RNCC: 3 | RNVC: 2
EP-0015500: RNCC: 5 | RNVC: 2
101GR0012: RNCC: 5 | RNVC: 9

25 Nov 2013

3040-01-623-6690
Linear Actuating Cylinder Assembly

016236690
EP-0007868: RNCC: 3 | RNVC: 2
EP-0007868: RNCC: 5 | RNVC: 2
EP-0007868: RNCC: 5 | RNVC: 9
EP-0007868: RNCC: 5 | RNVC: 9

25 Nov 2013

3040-01-623-6678
Linear Actuating Cylinder Assembly

016236678
MP-007897T: RNCC: 3 | RNVC: 9
MP-0007897T: RNCC: 5 | RNVC: 2
MP-0007897T: RNCC: 5 | RNVC: 9

25 Nov 2013

3040-01-623-6106
Spur Gearshaft

016236106
F129501: RNCC: 3 | RNVC: 2
F129093 ITEM NO 4: RNCC: 5 | RNVC: 2
F078513 ITEM NO 5: RNCC: 5 | RNVC: 2

21 Nov 2013

3040-01-623-5610
Rigid Connecting Link

016235610
162D622210-1001: RNCC: 3 | RNVC: 2
162D622210-1001: RNCC: 3 | RNVC: 2
160D622210-3: RNCC: 5 | RNVC: 2
160D622210-3: RNCC: 5 | RNVC: 9

19 Nov 2013

3040-01-623-4895
Bell Crank Support

016234895
803-6397269 ITEM 69 MOD 316 SST: RNCC: 3 | RNVC: 2

15 Nov 2013

3040-01-623-4835
Shouldered Shaft

016234835
C5-MB-S-05006: RNCC: 3 | RNVC: 2
5-MSJ-I XX:X ITEM 10: RNCC: 5 | RNVC: 2

15 Nov 2013

3040-01-623-4615
Rigid Connecting Link

016234615
162D725143-2001: RNCC: 3 | RNVC: 2
160D725143-11: RNCC: 5 | RNVC: 2
162D725143-2001: RNCC: 5 | RNVC: 2
160D725143-11: RNCC: 5 | RNVC: 9

14 Nov 2013

3040-01-623-4614
Straight Shaft Assembly

016234614
XA-47783: RNCC: 3 | RNVC: 2
XA-CA15352 ITEM 13: RNCC: 5 | RNVC: 2
XA-CA15352: RNCC: D | RNVC: 9

14 Nov 2013

3040-01-623-4310
Assembly Brake

016234310
BRDM13SS/SS-7K: RNCC: 3 | RNVC: 2

14 Nov 2013

3040-01-623-4193
Disc Brake Caliper

016234193
BRDMCAL-13-SS: RNCC: 3 | RNVC: 2

13 Nov 2013

3040-01-623-4073
Linear Actuating Cylinder Cap

016234073
2787939-1: RNCC: 3 | RNVC: 2

13 Nov 2013

3040-01-623-3812
Shaft Collar

016233812
C-050: RNCC: 3 | RNVC: 2
10514380-001: RNCC: 5 | RNVC: 2
10514380: RNCC: 7 | RNVC: 2

12 Nov 2013

3040-01-623-3779
Friction Lining Material

016233779
CB37716-001: RNCC: 3 | RNVC: 2
CB37805 ITEM 6: RNCC: 5 | RNVC: 1
CB37805-TD ITEM 1.6: RNCC: 5 | RNVC: 1

12 Nov 2013

3040-01-623-3451
Linear Actuating Cylinder Piston

016233451
CB37677-001: RNCC: 3 | RNVC: 2
CB37805 ITEM 2: RNCC: 5 | RNVC: 1
CB37805-TD ITEM 1.2: RNCC: 5 | RNVC: 1

8 Nov 2013

3040-01-623-3179
Shouldered Shaft

016233179
17-3-2865-1: RNCC: 3 | RNVC: 2

7 Nov 2013

3040-01-623-2839
Straight Axle

016232839
123SME90095-33: RNCC: 3 | RNVC: 2
123SME90095-33: RNCC: 5 | RNVC: 9

6 Nov 2013

3040-01-623-2241
Extension Shaft

016232241
122E0156G-2: RNCC: 3 | RNVC: 2
122E1027-G01ITEM48: RNCC: 5 | RNVC: 9
122E1059G02: RNCC: 5 | RNVC: 9

5 Nov 2013

3040-01-623-2220
Extension Shaft

016232220
122E1058G02: RNCC: 3 | RNVC: 2
122E1027-G01ITEM31: RNCC: 5 | RNVC: 2

5 Nov 2013

3040-01-623-2217
Worm Shaft

016232217
058010: RNCC: 3 | RNVC: 2
MAX AC36B ITEM 3: RNCC: 5 | RNVC: 2

5 Nov 2013

3040-01-623-2177
Rigid Connecting Link

016232177
17-3-2807-1: RNCC: 3 | RNVC: 2

5 Nov 2013

3040-01-623-2113
Shouldered Shaft Assembly

016232113
053031: RNCC: 3 | RNVC: 2
MAX AC36B ITEM 2: RNCC: 5 | RNVC: 2

5 Nov 2013

3040-01-623-1994
Straight Shaft

016231994
051511: RNCC: 3 | RNVC: 2
MAX AC36B ITEM 1: RNCC: 5 | RNVC: 2

5 Nov 2013

3040-01-623-1866
Rigid Connecting Link

016231866
H552-0703-A9: RNCC: 3 | RNVC: 2
563-8217012-11: RNCC: 5 | RNVC: 2
563-8217012: RNCC: D | RNVC: 9

4 Nov 2013

3040-01-623-1861
Flexible Shaft Assembly

016231861
VCFX-1300-264: RNCC: 3 | RNVC: 2
VCFX-1300-22 FT: RNCC: 5 | RNVC: 2

4 Nov 2013

3040-01-623-0862
Manual Control Lever

016230862
19006: RNCC: 3 | RNVC: 2

31 Oct 2013

3040-01-623-0296
Counterbalance Weight

016230296
13414809: RNCC: 3 | RNVC: 2

29 Oct 2013

Load More Results