What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 164 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 164 of 300

3040-01-653-0212
Shaft Collar

016530212
69-41206U2: RNCC: 3 | RNVC: 2
69-41206-2: RNCC: 5 | RNVC: 2

10 Mar 2016

3040-01-653-0082
Pawl

016530082
40289-45279-10: RNCC: 3 | RNVC: 2
40289-45279: RNCC: D | RNVC: 9

10 Mar 2016

3040-01-652-9999
Mechanical Drive Housing

016529999
10-5597G: RNCC: 3 | RNVC: 2

10 Mar 2016

3040-01-652-9989
Mechanical Drive Housing

016529989
10-206G: RNCC: 3 | RNVC: 2

10 Mar 2016

3040-01-652-9894
Hydraulic Control Assembly

016529894
271T5220-9: RNCC: 3 | RNVC: 1

9 Mar 2016

3040-01-652-9744
Electrical-Fluid Pressure Connector Assembly

016529744
611C401-72: RNCC: 3 | RNVC: 2
S9241-CU-MMA-010 REV2 TABLE 6-1: RNCC: 5 | RNVC: 9

9 Mar 2016

3040-01-652-9549
Straight Shaft

016529549
12581450: RNCC: 3 | RNVC: 2

9 Mar 2016

3040-01-652-9227
Ram Linear Actuator

016529227
13055589: RNCC: 1 | RNVC: 2
8222M42: RNCC: 3 | RNVC: 2
8222M36: RNCC: 5 | RNVC: 9

8 Mar 2016

3040-01-652-9202
Linear Actuating Cylinder Assembly

016529202
566-6985426-A4: RNCC: 3 | RNVC: 1
H621-0102-A4: RNCC: 5 | RNVC: 1
H621-0102-A4L1: RNCC: 5 | RNVC: 2

8 Mar 2016

3040-01-652-7214
Mechanically Actuated Spindle

016527214
29501459: RNCC: 3 | RNVC: 2

2 Mar 2016

3040-01-652-6280
Linear Actuating Cylinder Assembly

016526280
40031375-ESI: RNCC: 3 | RNVC: 1
40031375-ESI: RNCC: 5 | RNVC: 1

29 Feb 2016

3040-01-652-5710
Rigid Connecting Link

016525710
2FSH51012-0001: RNCC: 3 | RNVC: 2

26 Feb 2016

3040-01-652-5711
Rigid Connecting Link

016525711
2FSH51020-0001: RNCC: 3 | RNVC: 2
2FSH51020-0001: RNCC: 5 | RNVC: 9

26 Feb 2016

3040-01-652-5638
Tension Spring Assembly

016525638
JSFM55-1: RNCC: 1 | RNVC: 2
JSFM55-1: RNCC: 3 | RNVC: 2
JSFM55: RNCC: D | RNVC: 9

26 Feb 2016

3040-01-652-5631
Tension Spring Assembly

016525631
JSFM31-4: RNCC: 1 | RNVC: 2
JSFM31-4: RNCC: 3 | RNVC: 2
JSFM31: RNCC: D | RNVC: 9

26 Feb 2016

3040-01-652-5606
Rigid Connecting Link

016525606
CA40779-001: RNCC: 3 | RNVC: 2
CA40779: RNCC: D | RNVC: 9

26 Feb 2016

3040-01-652-3486
Bell Crank Support

016523486
40289-45085-1: RNCC: 3 | RNVC: 2

18 Feb 2016

3040-01-652-3287
Rigid Connecting Link

016523287
258T4213-3: RNCC: 3 | RNVC: 1

17 Feb 2016

3040-01-652-3130
Motor Worm Shaft

016523130
845-8513209: RNCC: 3 | RNVC: 1
845-7526227-053: RNCC: 5 | RNVC: 1

17 Feb 2016

3040-01-652-2738
Rigid Connecting Link

016522738
4F73183-106A: RNCC: 3 | RNVC: 2

16 Feb 2016

3040-01-652-2688
Rigid Connecting Link

016522688
13056170: RNCC: 3 | RNVC: 2

16 Feb 2016

3040-01-652-2689
Rigid Connecting Link

016522689
13056175: RNCC: 3 | RNVC: 2

16 Feb 2016

3040-01-652-2631
Straight Shaft

016522631
9421LS12: RNCC: 3 | RNVC: 2

16 Feb 2016

3040-01-652-2375
Mechanical Drive Housing Part

016522375
37442: RNCC: 3 | RNVC: 2
37429: RNCC: 5 | RNVC: 9

13 Feb 2016

3040-01-652-1906
Spline Adapter

016521906
20HS5426-001: RNCC: 3 | RNVC: 9
20HS5426: RNCC: D | RNVC: 9

11 Feb 2016

3040-01-652-1727
Tension Spring Assembly

016521727
ST482-1: RNCC: 3 | RNVC: 2
2WSV64908-0001: RNCC: 3 | RNVC: 2

11 Feb 2016

3040-01-652-1372
Shouldered Shaft

016521372
29077: RNCC: 3 | RNVC: 2
29077ZY: RNCC: 5 | RNVC: 2

10 Feb 2016

3040-01-651-9733
Manual Control Lever Assembly

016519733
8-52-156M: RNCC: 3 | RNVC: 2

5 Feb 2016

3040-01-651-9649
Rigid Connecting Link

016519649
4C63121-101A: RNCC: 3 | RNVC: 2

5 Feb 2016

3040-01-651-9405
Breather

016519405
22253-02063B: RNCC: 3 | RNVC: 9
22253-02063B: RNCC: 5 | RNVC: 2

4 Feb 2016

3040-01-651-8660
Shouldered Axle

016518660
13543234: RNCC: 3 | RNVC: 2

2 Feb 2016

3040-01-651-8203
Shouldered Shaft

016518203
4043-100-016553: RNCC: 3 | RNVC: 9

30 Jan 2016

3040-01-651-7984
Rigid Connecting Link

016517984
2CHV52501-3003: RNCC: 1 | RNVC: 2
22238-3: RNCC: 3 | RNVC: 2

29 Jan 2016

3040-01-651-7948
Rigid Connecting Link

016517948
2WSH62819-0002: RNCC: 3 | RNVC: 2

29 Jan 2016

3040-01-651-7950
Rigid Connecting Link

016517950
2WSH64965-0002: RNCC: 3 | RNVC: 2

29 Jan 2016

3040-01-651-7946
Rigid Connecting Link

016517946
2WSH62819-0001: RNCC: 3 | RNVC: 2

29 Jan 2016

3040-01-651-7933
Straight Shaft Assembly

016517933
189652-2: RNCC: 3 | RNVC: 2
189652-2: RNCC: 3 | RNVC: 2
2WRV00451-0003: RNCC: 7 | RNVC: 2

29 Jan 2016

3040-01-651-7924
Rigid Connecting Link

016517924
2WPH22034-0003: RNCC: 3 | RNVC: 2

29 Jan 2016

3040-01-651-7931
Straight Shaft Assembly

016517931
189650-2: RNCC: 3 | RNVC: 2
189650-2: RNCC: 3 | RNVC: 2
2WRV00351-0003: RNCC: 7 | RNVC: 2

29 Jan 2016

3040-01-651-7930
Straight Shaft Assembly

016517930
189660-1: RNCC: 3 | RNVC: 2
189660-1: RNCC: 3 | RNVC: 2
2WRV00350-0002: RNCC: 7 | RNVC: 2

29 Jan 2016

3040-01-651-7921
Rigid Connecting Link

016517921
2WPH22005-0001: RNCC: 3 | RNVC: 2

29 Jan 2016

3040-01-651-7923
Rigid Connecting Link

016517923
2WPH23030-0001: RNCC: 3 | RNVC: 2

29 Jan 2016

3040-01-651-7392
Hub Clamp

016517392
9000008481: RNCC: 3 | RNVC: 2

28 Jan 2016

3040-01-651-7388
Hub Clamp

016517388
9000008463: RNCC: 3 | RNVC: 2

28 Jan 2016

3040-01-651-7318
Linear Actuating Cylinder Assembly

016517318
07070SOCN42812-3: RNCC: 1 | RNVC: 2
R20010024CDEZ: RNCC: 3 | RNVC: 2
42812: RNCC: D | RNVC: 9

28 Jan 2016

3040-01-651-6829
Straight Shaft

016516829
915-5000048-01: RNCC: 3 | RNVC: 2

26 Jan 2016

3040-01-651-6739
Straight Shaft

016516739
915-5000040-01: RNCC: 3 | RNVC: 2

26 Jan 2016

3040-01-651-6693
Shaft Collar

016516693
4769-6467-0360: RNCC: 3 | RNVC: 2
1211689-203: RNCC: 3 | RNVC: 2
1211689: RNCC: D | RNVC: 9

26 Jan 2016

3040-01-651-6456
Housing Adapter

016516456
4212748: RNCC: 1 | RNVC: 2
11735001: RNCC: 3 | RNVC: 2

25 Jan 2016

3040-01-651-6159
Shouldered Shaft

016516159
8M0069774: RNCC: 3 | RNVC: 2

23 Jan 2016

3040-01-651-5911
Linear Actuating Cylinder Cap

016515911
1211689-206: RNCC: 3 | RNVC: 2
1211689: RNCC: D | RNVC: 9

22 Jan 2016

3040-01-651-4874
Tension Spring Assembly

016514874
9A-0199-1410B: RNCC: 3 | RNVC: 2
D4R-19219 REV 14 ITEM NO.110: RNCC: 5 | RNVC: 1
0199-1410B: RNCC: 5 | RNVC: 9
D4R-19219: RNCC: D | RNVC: 9

20 Jan 2016

3040-01-651-4368
Shouldered Shaft

016514368
4212733: RNCC: 3 | RNVC: 2
17862000: RNCC: 5 | RNVC: 2

19 Jan 2016

3040-01-651-4053
Rigid Connecting Link

016514053
65-25861-6: RNCC: 3 | RNVC: 2

15 Jan 2016

3040-01-651-4029
Linear Actuating Cylinder Assembly

016514029
HP3-400X9.13AM-ANCC-ANNN-O/M/O: RNCC: 3 | RNVC: 9
L1846-02-202-1 ITEM 6: RNCC: 5 | RNVC: 1
GAC718: RNCC: 5 | RNVC: 2
L1846-02-203-1 ITEM 6: RNCC: 5 | RNVC: 2

15 Jan 2016

3040-01-651-4019
Straight Shaft

016514019
915-7000006-01: RNCC: 3 | RNVC: 2

15 Jan 2016

3040-01-651-3853
Brake Drum

016513853
JTE133670-1: RNCC: 3 | RNVC: 2
JTE133670: RNCC: D | RNVC: 9

15 Jan 2016

3040-01-651-3252
Counterbalance Weight

016513252
6631733-1: RNCC: 3 | RNVC: 2
6631733: RNCC: D | RNVC: 9

13 Jan 2016

3040-01-651-3239
Rigid Connecting Link

016513239
14101368: RNCC: 3 | RNVC: 2

13 Jan 2016

3040-01-651-2969
Linear Actuating Cylinder Assembly

016512969
HP3-325X6.5AM-ACNN-ANNN-O/M/O: RNCC: 3 | RNVC: 9
GAD562: RNCC: 5 | RNVC: 2
L1846-02-200-1 ITEM 3: RNCC: C | RNVC: 1

13 Jan 2016

3040-01-651-2807
Linear Actuating Cylinder Assembly

016512807
50001525: RNCC: 3 | RNVC: 2

12 Jan 2016

3040-01-651-2074
Shouldered Shaft

016512074
845-7526491-002: RNCC: 3 | RNVC: 2
845-7526491: RNCC: D | RNVC: 9

8 Jan 2016

3040-01-651-1852
Spur Gearshaft

016511852
70R777: RNCC: 3 | RNVC: 1

7 Jan 2016

3040-01-651-1538
Straight Shaft

016511538
656D0551 J109A: RNCC: 3 | RNVC: 2
999F0937 FN 22: RNCC: C | RNVC: 1
PL-999F0937 FN 22: RNCC: C | RNVC: 1

6 Jan 2016

3040-01-651-1307
Rigid Connecting Link

016511307
13025179-2: RNCC: 3 | RNVC: 2

6 Jan 2016

3040-01-651-0837
Rigid Connecting Link

016510837
13543502: RNCC: 3 | RNVC: 2

5 Jan 2016

3040-01-651-0841
Rigid Connecting Link

016510841
13543509: RNCC: 3 | RNVC: 2

5 Jan 2016

3040-01-651-0470
Shaft Collar

016510470
913007: RNCC: 3 | RNVC: 2

31 Dec 2015

3040-01-651-0463
Shaft Collar

016510463
913009: RNCC: 3 | RNVC: 2

31 Dec 2015

3040-01-651-0467
Shaft Collar

016510467
912481: RNCC: 3 | RNVC: 2

31 Dec 2015

3040-01-651-0460
Shaft Collar

016510460
913679: RNCC: 3 | RNVC: 2

31 Dec 2015

3040-01-651-0455
Shaft Collar

016510455
913008: RNCC: 3 | RNVC: 2

31 Dec 2015

3040-01-651-0457
Shaft Collar

016510457
913010: RNCC: 3 | RNVC: 2

31 Dec 2015

3040-01-651-0336
Hydraulic Accumulator

016510336
ACC-X-063444: RNCC: 3 | RNVC: 2

30 Dec 2015

3040-01-651-0329
Bell Crank

016510329
203161: RNCC: 3 | RNVC: 2

30 Dec 2015

3040-01-651-0317
Shouldered Shaft

016510317
845-8219357: RNCC: 3 | RNVC: 2
845-7526225-179: RNCC: 5 | RNVC: 2

30 Dec 2015

3040-01-651-0049
Mechanical Drive Housing

016510049
B-805-12110-505: RNCC: 3 | RNVC: 2

28 Dec 2015

3040-01-650-9973
Linear Actuating Cylinder Assembly

016509973
13048745: RNCC: 3 | RNVC: 2

28 Dec 2015

3040-01-650-9908
Straight Axle

016509908
123SME90120-85: RNCC: 3 | RNVC: 2
123SME90120-85: RNCC: 5 | RNVC: 9

28 Dec 2015

3040-01-650-9822
Flexible Drive Shaft

016509822
13545550: RNCC: 3 | RNVC: 2

24 Dec 2015

3040-01-650-9705
Bell Crank

016509705
3992AS202-1: RNCC: 3 | RNVC: 2
3992AS202: RNCC: D | RNVC: 9

23 Dec 2015

3040-01-650-9437
Counterbalance Weight

016509437
LS1077952: RNCC: 3 | RNVC: 2

22 Dec 2015

3040-01-650-8546
Shouldered Shaft

016508546
110099: RNCC: 3 | RNVC: 2

18 Dec 2015

3040-01-650-8547
Shouldered Shaft

016508547
108691: RNCC: 3 | RNVC: 2

18 Dec 2015

3040-01-650-8551
Rigid Connecting Link

016508551
107981: RNCC: 3 | RNVC: 2

18 Dec 2015

3040-01-650-7607
Rigid Connecting Link

016507607
2CSH20978-3001: RNCC: 3 | RNVC: 2

15 Dec 2015

3040-01-650-7596
Nonvehicular Propeller Shaft

016507596
10062799: RNCC: 3 | RNVC: 2
2CAH50511-0001: RNCC: 7 | RNVC: 2

15 Dec 2015

3040-01-650-7595
Nonvehicular Propeller Shaft

016507595
10062798: RNCC: 3 | RNVC: 2
2CAH50510-0001: RNCC: 7 | RNVC: 2

15 Dec 2015

3040-01-650-7494
Rigid Connecting Link

016507494
KRD8-6-001: RNCC: 3 | RNVC: 2
2WSH64590-0002: RNCC: 7 | RNVC: 2

15 Dec 2015

3040-01-650-7487
Rigid Connecting Link

016507487
2WSH50172-0001: RNCC: 3 | RNVC: 2

15 Dec 2015

3040-01-650-7402
Shouldered Shaft

016507402
1707015: RNCC: 3 | RNVC: 2
2MEH00022-0001: RNCC: 5 | RNVC: 2
1707014: RNCC: D | RNVC: 9

15 Dec 2015

3040-01-650-6906
Shouldered Shaft

016506906
123SME90120-53: RNCC: 3 | RNVC: 2
123SME90120-53: RNCC: 5 | RNVC: 9

15 Dec 2015

3040-01-650-5849
Shouldered Shaft

016505849
A4W RPPY SK-723: RNCC: 3 | RNVC: 1

10 Dec 2015

3040-01-650-5579
Alignment Shaft

016505579
13541927: RNCC: 3 | RNVC: 2

9 Dec 2015

3040-01-650-5397
Rigid Connecting Link

016505397
180T0006-1: RNCC: 3 | RNVC: 1

8 Dec 2015

3040-01-650-5322
Shouldered Shaft

016505322
7662319-002: RNCC: 3 | RNVC: 2
7662319-002: RNCC: 5 | RNVC: 2

8 Dec 2015

3040-01-650-5008
Brake Disc

016505008
13055645: RNCC: 3 | RNVC: 2

7 Dec 2015

3040-01-650-4568
Nonaircraft Mechanical Actuator

016504568
13055600: RNCC: 3 | RNVC: 2

3 Dec 2015

3040-01-650-4517
Pneumatic Actuator Cylinder Housing

016504517
LS1043991: RNCC: 3 | RNVC: 2

3 Dec 2015

3040-01-650-4501
Mechanical Drive Housing Part

016504501
A3310933: RNCC: 3 | RNVC: 2

3 Dec 2015

3040-01-650-4445
Shaft Retaining Plate

016504445
13055554: RNCC: 3 | RNVC: 2

3 Dec 2015

3040-01-650-4406
Rigid Connecting Link

016504406
13055628: RNCC: 3 | RNVC: 2

3 Dec 2015

3040-01-650-4231
Straight Shaft

016504231
1401AS104-1: RNCC: 3 | RNVC: 2
1401AS104: RNCC: D | RNVC: 9

2 Dec 2015

3040-01-650-3930
Straight Shaft

016503930
0XP12X395: RNCC: 3 | RNVC: 2
7A20810 FIND NO 30: RNCC: 5 | RNVC: 2
1SCA022042R5990: RNCC: 5 | RNVC: 9

1 Dec 2015

3040-01-650-3459
Shaft Retaining Plate

016503459
13055567: RNCC: 3 | RNVC: 2

30 Nov 2015

3040-01-650-3380
Linear Actuating Cylinder

016503380
13058839: RNCC: 3 | RNVC: 2

30 Nov 2015

3040-01-650-2905
Control Cam

016502905
Q015-230-A: RNCC: 3 | RNVC: 2
P2092 NO. 30: RNCC: 5 | RNVC: 1

25 Nov 2015

3040-01-650-2898
Control Cam

016502898
Q015-231-A: RNCC: 3 | RNVC: 2
P2092 NO. 31: RNCC: 5 | RNVC: 1

25 Nov 2015

3040-01-650-2740
Straight Shaft

016502740
141T4891-3: RNCC: 3 | RNVC: 1

24 Nov 2015

3040-01-650-2737
Rigid Connecting Link

016502737
313T3315-6: RNCC: 3 | RNVC: 1

24 Nov 2015

3040-01-650-2662
Shouldered Shaft

016502662
Q030-221-A: RNCC: 3 | RNVC: 2
P2092 NO. 21: RNCC: 5 | RNVC: 1

24 Nov 2015

3040-01-650-2611
Rigid Connecting Link

016502611
12033-32: RNCC: 3 | RNVC: 2
12033-32: RNCC: 5 | RNVC: 9
LINE 1:12033032 HB-021313: RNCC: C | RNVC: 1
LINE 2 REV A SHT 14: RNCC: C | RNVC: 1

24 Nov 2015

3040-01-650-2509
Lever Fitting

016502509
6181620: RNCC: 3 | RNVC: 2

24 Nov 2015

3040-01-650-2366
Control Cam

016502366
Q015-828-A: RNCC: 3 | RNVC: 2
P2092 NO. 28: RNCC: 5 | RNVC: 1

23 Nov 2015

3040-01-650-2357
Straight Shaft

016502357
Q080-217-B: RNCC: 3 | RNVC: 2
P2092 NO. 17: RNCC: 5 | RNVC: 1

23 Nov 2015

3040-01-650-2222
Rigid Connecting Link

016502222
2FSH73755-0003: RNCC: 3 | RNVC: 2

23 Nov 2015

3040-01-650-2190
Rigid Connecting Link

016502190
2WPH43157-0003: RNCC: 3 | RNVC: 2

23 Nov 2015

3040-01-650-1830
Straight Shaft

016501830
12580281-4: RNCC: 3 | RNVC: 2

23 Nov 2015

3040-01-650-1736
Control Cam

016501736
12292329: RNCC: 3 | RNVC: 2

23 Nov 2015

3040-01-650-1549
Straight Shaft

016501549
12580281-3: RNCC: 3 | RNVC: 2

20 Nov 2015

3040-01-650-1350
Rigid Connecting Link

016501350
12578462: RNCC: 3 | RNVC: 2

20 Nov 2015

3040-01-650-1351
Rigid Connecting Link

016501351
13055629: RNCC: 3 | RNVC: 2

20 Nov 2015

3040-01-650-1201
Mechanically Actuated Spindle

016501201
8100-1252-0318 ASSY 062 PT NO 35: RNCC: 3 | RNVC: 2
8100-1252-0318 SH 7F DET 7F-E: RNCC: 5 | RNVC: 2

19 Nov 2015

3040-01-650-1164
Shouldered Shaft

016501164
13055549: RNCC: 3 | RNVC: 2

19 Nov 2015

3040-01-650-0015
Shouldered Shaft

016500015
T00362-5083: RNCC: 3 | RNVC: 2
T00362-5083: RNCC: 3 | RNVC: 9

18 Nov 2015

3040-01-649-9845
Nonaircraft Mechanical Actuator

016499845
14600-999-000: RNCC: 3 | RNVC: 2
14103 PL FIND NO 2: RNCC: C | RNVC: 1

17 Nov 2015

3040-01-649-9569
Remote Control Lever

016499569
51U728: RNCC: 3 | RNVC: 1

16 Nov 2015

3040-01-649-9384
Straight Shaft

016499384
Q030-216-A: RNCC: 3 | RNVC: 2

16 Nov 2015

3040-01-649-8122
Linear Actuating Cylinder Cap

016498122
13055654: RNCC: 3 | RNVC: 2

12 Nov 2015

3040-01-649-8078
Linear Actuating Cylinder Cap

016498078
13055651: RNCC: 3 | RNVC: 2

12 Nov 2015

3040-01-649-8020
Straight Shaft

016498020
55T361: RNCC: 3 | RNVC: 1

10 Nov 2015

3040-01-649-7542
Shouldered Shaft

016497542
141T4922-4: RNCC: 3 | RNVC: 1

9 Nov 2015

3040-01-649-7547
Shouldered Shaft

016497547
141T4922-5: RNCC: 3 | RNVC: 1

9 Nov 2015

3040-01-649-7537
Shaft Collar

016497537
141T4920-2: RNCC: 3 | RNVC: 1

9 Nov 2015

3040-01-649-7367
Pneumatic Actuator Cylinder Housing

016497367
13055656: RNCC: 3 | RNVC: 2

9 Nov 2015

3040-01-649-7136
Brake Shoe

016497136
995-8556055 ITEM 36: RNCC: 3 | RNVC: 2
995-8556055: RNCC: D | RNVC: 9

7 Nov 2015

3040-01-649-7131
Ball Joint

016497131
250011-578: RNCC: 3 | RNVC: 2

7 Nov 2015

3040-01-649-7021
Shouldered Shaft Assembly

016497021
D135810-2-SS: RNCC: 3 | RNVC: 2

6 Nov 2015

3040-01-649-6931
Shouldered Shaft Assembly

016496931
D135809-2-SS: RNCC: 3 | RNVC: 2

6 Nov 2015

3040-01-649-6909
Straight Shaft

016496909
C135758-1: RNCC: 3 | RNVC: 2

6 Nov 2015

3040-01-649-6837
Shouldered Shaft

016496837
12580281-1: RNCC: 3 | RNVC: 2
12580281: RNCC: D | RNVC: 9

6 Nov 2015

3040-01-649-6391
Shouldered Shaft

016496391
12580281-2: RNCC: 3 | RNVC: 2
12580281: RNCC: D | RNVC: 9

5 Nov 2015

3040-01-649-6314
Rigid Connecting Link

016496314
12580280-2: RNCC: 3 | RNVC: 2
12580280: RNCC: D | RNVC: 9

5 Nov 2015

3040-01-649-6234
Rigid Connecting Link

016496234
313T3315-5: RNCC: 3 | RNVC: 1

4 Nov 2015

3040-01-649-6032
Housing Adapter

016496032
3005916: RNCC: 1 | RNVC: 2
29533231: RNCC: 3 | RNVC: 2

4 Nov 2015

3040-01-649-5752
Shouldered Axle

016495752
29076: RNCC: 3 | RNVC: 2

3 Nov 2015

3040-01-649-5550
Spur Gearshaft

016495550
50R044: RNCC: 3 | RNVC: 1

2 Nov 2015

3040-01-649-5443
Shouldered Axle

016495443
13055653: RNCC: 3 | RNVC: 2

2 Nov 2015

3040-01-649-5417
Pivot Shaft Assembly

016495417
13055593: RNCC: 3 | RNVC: 2

2 Nov 2015

3040-01-649-4922
Rigid Connecting Link

016494922
12580635: RNCC: 3 | RNVC: 2

30 Oct 2015

3040-01-649-4352
Linear Actuating Cylinder Head

016494352
4AT2-8222-1: RNCC: 3 | RNVC: 2

28 Oct 2015

3040-01-649-4041
Rigid Connecting Link

016494041
A90X30: RNCC: 3 | RNVC: 2

28 Oct 2015

3040-01-649-4033
Straight Shaft

016494033
OXP12X395: RNCC: 3 | RNVC: 2
7A20210 REV B FIND NO 30: RNCC: 5 | RNVC: 2

28 Oct 2015

3040-01-649-4024
Straight Shaft

016494024
195646: RNCC: 3 | RNVC: 2
20864004 REV K FIND NO 17: RNCC: 5 | RNVC: 2
20864110: RNCC: D | RNVC: 9

28 Oct 2015

3040-01-649-3536
Linear Actuating Cylinder Assembly

016493536
7A90001: RNCC: 3 | RNVC: 2
7A70049 REV H FIND NO 26: RNCC: C | RNVC: 1
7A70048 REV H FIND NO 26: RNCC: C | RNVC: 1
7A70049: RNCC: D | RNVC: 9

27 Oct 2015

3040-01-649-3043
Mechanical Drive Housing

016493043
29075: RNCC: 3 | RNVC: 2
29075ANB: RNCC: 5 | RNVC: 2

26 Oct 2015

3040-01-649-2912
Rigid Connecting Link

016492912
7-311511137-11: RNCC: 3 | RNVC: 2

23 Oct 2015

3040-01-649-2898
Rigid Connecting Link

016492898
7-311511136-7: RNCC: 3 | RNVC: 2

23 Oct 2015

3040-01-649-2709
Rigid Connecting Link

016492709
311T2740-8: RNCC: 3 | RNVC: 1

22 Oct 2015

3040-01-649-1549
Detent Plate

016491549
254W6001-6: RNCC: 3 | RNVC: 1

20 Oct 2015

3040-01-649-1499
Mechanical Drive Housing

016491499
29412: RNCC: 3 | RNVC: 2
29412ANB: RNCC: 5 | RNVC: 2

20 Oct 2015

3040-01-649-1161
Rigid Connecting Link

016491161
311T4710-5: RNCC: 3 | RNVC: 1

19 Oct 2015

3040-01-649-0733
Straight Shaft

016490733
7A20710 REV A FIND NO 30: RNCC: 3 | RNVC: 2
0P12X395: RNCC: 5 | RNVC: 9
7A20710 REV A: RNCC: D | RNVC: 9

16 Oct 2015

3040-01-649-0665
Linear Actuating Cylinder Cap

016490665
LS1031058: RNCC: 3 | RNVC: 2

16 Oct 2015

3040-01-649-0434
Shouldered Shaft

016490434
254W2013-3: RNCC: 3 | RNVC: 2

15 Oct 2015

3040-01-648-9986
Shouldered Shaft

016489986
29072: RNCC: 3 | RNVC: 2
29072ZY: RNCC: 5 | RNVC: 2

14 Oct 2015

3040-01-648-8445
Shouldered Shaft

016488445
254W2013-1: RNCC: 3 | RNVC: 1

8 Oct 2015

3040-01-648-8171
Shouldered Shaft

016488171
254W2013-2: RNCC: 3 | RNVC: 2

7 Oct 2015

3040-01-648-7290
Rigid Connecting Link

016487290
161A4100-3: RNCC: 3 | RNVC: 2

5 Oct 2015

3040-01-648-6647
Mechanically Actuated Spindle

016486647
8100-1252-0318 ASSY 066 PT NO 35: RNCC: 3 | RNVC: 2
8100-1252-0318 SH 6C DET 6C-E: RNCC: C | RNVC: 1
8100-1252-0318: RNCC: D | RNVC: 9

1 Oct 2015

3040-01-648-6471
Cylinder Support

016486471
1165-10-500: RNCC: 3 | RNVC: 2

30 Sep 2015

3040-01-648-6017
Spur Gearshaft

016486017
P000120: RNCC: 3 | RNVC: 2
P000120 REV A: RNCC: C | RNVC: 1

29 Sep 2015

3040-01-648-6001
Spur Gearshaft

016486001
P001379: RNCC: 3 | RNVC: 2
DWG P001379 REV -: RNCC: C | RNVC: 1

29 Sep 2015

3040-01-648-5973
Shouldered Shaft

016485973
3174260-1: RNCC: 3 | RNVC: 2
3174260: RNCC: D | RNVC: 9

29 Sep 2015

3040-01-648-5607
Mechanical Drive Housing

016485607
13646295: RNCC: 3 | RNVC: 2

28 Sep 2015

3040-01-648-5581
Control Cam

016485581
803-5184174 PC 25: RNCC: 3 | RNVC: 2
301-8544013-A1: RNCC: 5 | RNVC: 2
803-5184174: RNCC: D | RNVC: 9

28 Sep 2015

3040-01-648-5558
Rigid Connecting Link

016485558
DB-010412X7-TR: RNCC: 3 | RNVC: 2
DB-010412 REV D: RNCC: C | RNVC: 1
DB-010412X-TR: RNCC: C | RNVC: 1

28 Sep 2015

3040-01-648-5274
Nonaircraft Mechanical Actuator

016485274
7A40254: RNCC: 3 | RNVC: 2

28 Sep 2015

3040-01-648-4999
Control Cable Assembly

016484999
U545516: RNCC: 3 | RNVC: 2

26 Sep 2015

3040-01-648-4744
Bevel Gearshaft

016484744
0950200000: RNCC: 3 | RNVC: 2
SKD168962 ITEM 62: RNCC: 5 | RNVC: 2
SKD168962: RNCC: D | RNVC: 9

25 Sep 2015

3040-01-648-4736
Ballscrew Assembly

016484736
0910240000: RNCC: 3 | RNVC: 2
SKD168962 ITEM 20: RNCC: 5 | RNVC: 2
SKD168962: RNCC: D | RNVC: 9

25 Sep 2015

3040-01-648-4704
Mechanical Drive Housing

016484704
12446398: RNCC: 3 | RNVC: 2

25 Sep 2015

3040-01-648-4395
Mechanically Actuated Spindle

016484395
8100-1252-0318 ASSY 073 PT NO 35: RNCC: 3 | RNVC: 2
8100-1252-0318 DETAIL 12C-E: RNCC: C | RNVC: 1
8100-1252-0318: RNCC: D | RNVC: 9

24 Sep 2015

3040-01-648-4193
Rigid Connecting Link

016484193
7A70031: RNCC: 3 | RNVC: 2
7A10026: RNCC: D | RNVC: 9

23 Sep 2015

3040-01-648-4184
Shouldered Shaft

016484184
7A70172: RNCC: 3 | RNVC: 2
7A10026: RNCC: D | RNVC: 9

23 Sep 2015

3040-01-648-3851
Bevel Gearshaft

016483851
0950210000: RNCC: 3 | RNVC: 2
SKD168962 ITEM 69: RNCC: 5 | RNVC: 2
SKD168962: RNCC: D | RNVC: 9

22 Sep 2015

3040-01-648-3837
Shaft Idler

016483837
DSC212E-D VIR SVA022-002: RNCC: 3 | RNVC: 2
19-87-3500D: RNCC: 5 | RNVC: 2
DSC212E-D: RNCC: D | RNVC: 9

22 Sep 2015

3040-01-648-3257
Mechanically Actuated Spindle

016483257
8100-1252-0318 ASSY 065 PT NO 35: RNCC: 3 | RNVC: 2
8100-1252-0318: RNCC: D | RNVC: 9

21 Sep 2015

3040-01-648-2366
Rigid Connecting Link

016482366
DB-010412X7-CR: RNCC: 3 | RNVC: 2
DB-010412 REV D SHT 7: RNCC: C | RNVC: 1

18 Sep 2015

3040-01-648-2339
Rigid Connecting Link

016482339
6655476-1: RNCC: 3 | RNVC: 2
6655476: RNCC: D | RNVC: 9

18 Sep 2015

3040-01-648-1674
Hydraulic Accumulator Cylinder

016481674
566-7067171-A2: RNCC: 3 | RNVC: 2
H625-0309-A2: RNCC: 5 | RNVC: 2

16 Sep 2015

3040-01-648-1396
Rigid Connecting Link

016481396
290-175-01: RNCC: 3 | RNVC: 2

16 Sep 2015

3040-01-648-0964
Rigid Connecting Link

016480964
DB-010412X8-TR: RNCC: 3 | RNVC: 2
167-7044216 PC 50 ADD 6": RNCC: C | RNVC: 1
DB-010412 REV D SHEET 8 MOD PART: RNCC: C | RNVC: 1

15 Sep 2015

3040-01-648-0858
Shaft Collar

016480858
2C-037: RNCC: 3 | RNVC: 2
6436K13: RNCC: 5 | RNVC: 2

14 Sep 2015

3040-01-648-0596
Planetary Roller Screw

016480596
39302: RNCC: 3 | RNVC: 2
9900-0103: RNCC: 5 | RNVC: 2
13054999: RNCC: 7 | RNVC: 2

12 Sep 2015

3040-01-648-0538
Mechanically Actuated Spindle

016480538
8100-1252-0318 ASSY 071 PT NO 35: RNCC: 3 | RNVC: 2
8100-1252-0318 SH 10C DET 10C-E: RNCC: C | RNVC: 1
8100-1252-0318: RNCC: D | RNVC: 9

12 Sep 2015

3040-01-648-0519
Control Cam

016480519
HB25: RNCC: 3 | RNVC: 2

11 Sep 2015

3040-01-648-0127
Control Cam

016480127
290-510-00: RNCC: 3 | RNVC: 2

10 Sep 2015

3040-01-647-9960
Jointed Link

016479960
5CV0211379-2: RNCC: 3 | RNVC: 2
13055051-2: RNCC: 7 | RNVC: 2

10 Sep 2015

3040-01-647-9815
Mechanically Actuated Spindle

016479815
8100-1252-0318 ASSY 070 PT NO 35: RNCC: 3 | RNVC: 2
8100-1252-0318 SH 9C DET 9C-E: RNCC: 3 | RNVC: 9

9 Sep 2015

3040-01-647-9773
Manual Drive Ratche

016479773
P000892: RNCC: 3 | RNVC: 2
DWG P000892 REV -: RNCC: 5 | RNVC: 2

9 Sep 2015

3040-01-647-9725
Spur Gearshaft

016479725
P000122: RNCC: 3 | RNVC: 2
DWG P000122 REV -: RNCC: 5 | RNVC: 2

9 Sep 2015

3040-01-647-9708
Spur Gearshaft

016479708
DWG P000111 REV -: RNCC: 3 | RNVC: 2
P000111: RNCC: 3 | RNVC: 2

9 Sep 2015

3040-01-647-9543
Rigid Connecting Link

016479543
290-166-00: RNCC: 3 | RNVC: 2

9 Sep 2015

3040-01-647-9504
Tension Spring Assembly

016479504
68A810384-2001: RNCC: 3 | RNVC: 2

9 Sep 2015

3040-01-647-9503
Rotating Shaft Eye Bracket

016479503
290-168-00: RNCC: 3 | RNVC: 2

9 Sep 2015

3040-01-647-9319
Spur Gearshaft

016479319
9001137: RNCC: 3 | RNVC: 2
S9561-C9-MMA-010 INDEX 7-8-58: RNCC: D | RNVC: 9

8 Sep 2015

3040-01-647-8895
Linear Actuating Cylinder

016478895
13055043: RNCC: 3 | RNVC: 2

4 Sep 2015

3040-01-647-8868
Shouldered Shaft

016478868
300046-3-2: RNCC: 3 | RNVC: 2
301308 ITEM NO. 3 P/N 300046-3-2: RNCC: 5 | RNVC: 2
301308: RNCC: D | RNVC: 9

4 Sep 2015

3040-01-647-8849
Rigid Connecting Link

016478849
0050-2167: RNCC: 3 | RNVC: 2
0050-2167: RNCC: 3 | RNVC: 9
0050-2167-1.1: RNCC: D | RNVC: 9

4 Sep 2015

3040-01-647-8622
Tension Spring Assembly

016478622
14101284: RNCC: 3 | RNVC: 2
14101284: RNCC: 5 | RNVC: 1

3 Sep 2015

3040-01-647-8099
Shouldered Shaft

016478099
Z=24.2252.2030: RNCC: 3 | RNVC: 2
Z=24.2252.2030: RNCC: 5 | RNVC: 2
0011803801 ITEM 15: RNCC: 5 | RNVC: 2

2 Sep 2015

3040-01-647-7948
Mechanically Actuated Spindle

016477948
8100-1252-0318 ASSY 69 PT NO 35: RNCC: 3 | RNVC: 2

2 Sep 2015

3040-01-647-7766
Housing With Out Base Pl

016477766
X00E50202752/S0003: RNCC: 3 | RNVC: 2
X00E50202752/S0003: RNCC: 5 | RNVC: 2

1 Sep 2015

3040-01-647-7548
Straight Shaft

016477548
OXP6X430: RNCC: 3 | RNVC: 2

31 Aug 2015

3040-01-647-7107
Straight Shaft

016477107
3807530: RNCC: 3 | RNVC: 2
3807530: RNCC: D | RNVC: 9

29 Aug 2015

3040-01-647-7091
Straight Shaft

016477091
3427697: RNCC: 3 | RNVC: 2
3427697: RNCC: D | RNVC: 9

29 Aug 2015

3040-01-647-6549
Mechanical Drive Housing

016476549
4084611: RNCC: 3 | RNVC: 2

27 Aug 2015

3040-01-647-6502
Rigid Connecting Link

016476502
290-165-00: RNCC: 3 | RNVC: 2

27 Aug 2015

3040-01-647-6505
Mechanical Drive Housing

016476505
290-197-01: RNCC: 3 | RNVC: 2

27 Aug 2015

3040-01-647-6432
Straight Shaft

016476432
3587469: RNCC: 3 | RNVC: 2

26 Aug 2015

3040-01-647-6055
Inertia Damper

016476055
11457783: RNCC: 3 | RNVC: 2

26 Aug 2015

3040-01-647-5391
Speedometer-Tachometer Drive Adapter

016475391
12580199: RNCC: 3 | RNVC: 2

24 Aug 2015

3040-01-647-5370
Pawl

016475370
4118084: RNCC: 3 | RNVC: 2

24 Aug 2015

3040-01-647-5368
Multiple Gears Gearshaft

016475368
3828047: RNCC: 3 | RNVC: 2

24 Aug 2015

3040-01-647-5365
Mechanical Drive Housing

016475365
3828046: RNCC: 3 | RNVC: 2
3828046: RNCC: 5 | RNVC: 9

24 Aug 2015

3040-01-647-5357
Mechanical Drive Housing

016475357
4071892: RNCC: 3 | RNVC: 2
4071892: RNCC: 5 | RNVC: 9

24 Aug 2015

3040-01-647-4831
Rigid Connecting Link

016474831
232-009-01: RNCC: 3 | RNVC: 2

24 Aug 2015

3040-01-647-4296
Shaft Collar

016474296
3161767-13: RNCC: 3 | RNVC: 2

21 Aug 2015

3040-01-647-4219
Bell Crank Support

016474219
407-001-732-101: RNCC: 3 | RNVC: 2

21 Aug 2015

3040-01-647-4217
Bell Crank Support

016474217
407-101-528-105: RNCC: 3 | RNVC: 2

21 Aug 2015

3040-01-647-3811
Rigid Connecting Link

016473811
7383858-H5471905-080: RNCC: 3 | RNVC: 1
H5471905-080: RNCC: 5 | RNVC: 1
111-A-0023DSS: RNCC: 5 | RNVC: 1
H547-0001-H5471905-080: RNCC: 5 | RNVC: 1
111-A-0023DSSD4: RNCC: 5 | RNVC: 2
7383858-H5471905-080D4: RNCC: 5 | RNVC: 2
H547-0001-H5471905-080D4: RNCC: 5 | RNVC: 2
H5471905-080D4: RNCC: 5 | RNVC: 2

20 Aug 2015

3040-01-647-3557
Penetratiy Shaft

016473557
7383858-H5471905-0017: RNCC: 3 | RNVC: 1
H547-0001-H5471905-0017: RNCC: 5 | RNVC: 1
H5471905-0017: RNCC: 5 | RNVC: 1
H547-0001-H5471905-0017L1: RNCC: 5 | RNVC: 2
7383858-H5471905-0017L1: RNCC: 5 | RNVC: 2
H5471905-0017L1: RNCC: 5 | RNVC: 2

19 Aug 2015

3040-01-647-3449
Operating Shaft

016473449
7383858-H5471905-078: RNCC: 3 | RNVC: 1
19-97-1550A: RNCC: 5 | RNVC: 1
H547-0001-H5471905-078: RNCC: 5 | RNVC: 1
H5471905-078: RNCC: 5 | RNVC: 1
19-97-1550AD4: RNCC: 5 | RNVC: 2
7383858-H5471905-078D4: RNCC: 5 | RNVC: 2
H547-0001-H5471905-078D4: RNCC: 5 | RNVC: 2
H5471905-078D4: RNCC: 5 | RNVC: 2

19 Aug 2015

3040-01-647-2791
Housing Adapter

016472791
4081440: RNCC: 3 | RNVC: 2

15 Aug 2015

3040-01-647-2738
Rigid Connecting Link

016472738
000993-745-1: RNCC: 3 | RNVC: 2
X000993-745-1: RNCC: D | RNVC: 9

15 Aug 2015

3040-01-647-2618
Nonaircraft Mechanical Actuator

016472618
00-915294: RNCC: 3 | RNVC: 2
PL-60079 ITEM 12: RNCC: 5 | RNVC: 2
00-914324: RNCC: 5 | RNVC: 9
PL-60076 ITEM 12: RNCC: 5 | RNVC: 9

14 Aug 2015

3040-01-647-2611
Nonaircraft Mechanical Actuator

016472611
00-914323: RNCC: 3 | RNVC: 2
PL-60076 ITEM 31: RNCC: 5 | RNVC: 2

14 Aug 2015

3040-01-647-1348
Manual Control Lever

016471348
CB47902-001: RNCC: 3 | RNVC: 2
CB47902: RNCC: D | RNVC: 9

12 Aug 2015

3040-01-647-1245
Mechanical Drive Housing

016471245
7579738-002: RNCC: 3 | RNVC: 2
7579738-002: RNCC: 5 | RNVC: 2
7579738: RNCC: D | RNVC: 9

12 Aug 2015

3040-01-647-0573
Mechanical Drive Housing

016470573
7579592-021: RNCC: 3 | RNVC: 2

10 Aug 2015

3040-01-647-0468
Piston Ring

016470468
964110-06: RNCC: 3 | RNVC: 9

10 Aug 2015

3040-01-647-0445
Piston Ring

016470445
964110-08: RNCC: 3 | RNVC: 9

10 Aug 2015

3040-01-647-0417
Piston Ring

016470417
964110-10: RNCC: 3 | RNVC: 9

10 Aug 2015

3040-01-647-0066
Shouldered Shaft Assembly

016470066
185894-1: RNCC: 3 | RNVC: 2
185894: RNCC: D | RNVC: 9

7 Aug 2015

3040-01-646-9073
Shaft Collar

016469073
8C008: RNCC: 3 | RNVC: 2

4 Aug 2015

3040-01-646-9044
Shaft Retaining Plate

016469044
1966153C1: RNCC: 3 | RNVC: 2

4 Aug 2015

3040-01-646-8265
Multiple Gears Gearshaft

016468265
3392AS1694: RNCC: 3 | RNVC: 2

31 Jul 2015

3040-01-646-8111
Straight Shaft

016468111
17200-2: RNCC: 3 | RNVC: 2
17183 FIND NO. 2: RNCC: C | RNVC: 1
17200: RNCC: D | RNVC: 9

31 Jul 2015

3040-01-646-7898
Rigid Connecting Link

016467898
RTFA082: RNCC: 3 | RNVC: 2

30 Jul 2015

3040-01-646-7177
Shouldered Axle

016467177
01574623: RNCC: 3 | RNVC: 2
25265-512-0104 PC 5: RNCC: C | RNVC: 1
25265-512-0104: RNCC: D | RNVC: 9

29 Jul 2015

3040-01-646-6995
Bevel Gear And Shaft Assembly

016466995
0220-59311-800: RNCC: 3 | RNVC: 2
0220-59311-800 REV A: RNCC: D | RNVC: 9

28 Jul 2015

3040-01-646-6827
Spur Gearshaft

016466827
12446428-2: RNCC: 1 | RNVC: 2
900078: RNCC: 3 | RNVC: 2
12446428: RNCC: D | RNVC: 9

28 Jul 2015

3040-01-646-6812
Nonaircraft Mechanical Actuator

016466812
883-043: RNCC: 3 | RNVC: 2
0608C08-0229: RNCC: 5 | RNVC: 2
0608-00-0104 ITEM 50: RNCC: 5 | RNVC: 2

28 Jul 2015

3040-01-646-6813
Nonaircraft Mechanical Actuator

016466813
01-435-0435-4: RNCC: 3 | RNVC: 1

28 Jul 2015

3040-01-646-6751
Shouldered Shaft

016466751
051497-204-1: RNCC: 3 | RNVC: 2

28 Jul 2015

3040-01-646-6739
Straight Shaft

016466739
12446565: RNCC: 3 | RNVC: 2

28 Jul 2015

3040-01-646-6489
Linear Actuating Cylinder Piston

016466489
12446622: RNCC: 3 | RNVC: 2

27 Jul 2015

3040-01-646-5639
Shouldered Shaft

016465639
588-7666739 ITEM 10: RNCC: 3 | RNVC: 2

23 Jul 2015

3040-01-646-5508
Mechanically Actuated Spindle

016465508
D-WK-879-123-14: RNCC: 3 | RNVC: 2
WK-879-123 PC# 14: RNCC: C | RNVC: 1

22 Jul 2015

3040-01-646-5457
Mechanically Actuated Spindle

016465457
D-WK-879-50-14: RNCC: 3 | RNVC: 2
D-WK-879-50 REV J PC# 14: RNCC: C | RNVC: 1

22 Jul 2015

3040-01-646-4197
Rigid Connecting Link

016464197
13055790: RNCC: 3 | RNVC: 2

22 Jul 2015

3040-01-646-3862
Rigid Connecting Link

016463862
6655478-1: RNCC: 3 | RNVC: 2
6655478: RNCC: D | RNVC: 9

21 Jul 2015

3040-01-646-3603
Multiple Gears Gearshaft

016463603
3500650-1: RNCC: 3 | RNVC: 2

21 Jul 2015

3040-01-646-1706
Mechanically Actuated Spindle

016461706
D-WK-879-129-9: RNCC: 3 | RNVC: 2
D-WK-879-129 PC# 9: RNCC: C | RNVC: 1

14 Jul 2015

3040-01-646-1698
Mechanically Actuated Spindle

016461698
D-WK-879-107-14: RNCC: 3 | RNVC: 2
D-WK-879-107 REV H PC# 14: RNCC: C | RNVC: 1

14 Jul 2015

3040-01-646-1681
Mechanically Actuated Spindle

016461681
D-WK-879-27-14: RNCC: 3 | RNVC: 2
D-WK-879-27 REV K PC# 14: RNCC: C | RNVC: 1

14 Jul 2015

3040-01-646-1625
Differential Gear Unit

016461625
167-7384215-A1: RNCC: 3 | RNVC: 2
167-7384215-A1 NON DSS-SOC: RNCC: 5 | RNVC: 2
H547-1903-A1: RNCC: 5 | RNVC: 2

14 Jul 2015

3040-01-646-1258
Bell Crank

016461258
572-8200777 ITEM 69: RNCC: 3 | RNVC: 2
572-8204460 ITEM 16: RNCC: 5 | RNVC: 2

14 Jul 2015

3040-01-646-1245
Bell Crank

016461245
572-8200777 ITEM 68: RNCC: 3 | RNVC: 2
572-8204460 ITEM 15: RNCC: 5 | RNVC: 2

14 Jul 2015

3040-01-646-1178
Disc Brake Caliper

016461178
3PD081.40D D11 BBH-DDH-DDH-RS: RNCC: 3 | RNVC: 2

14 Jul 2015

3040-01-646-0864
Mechanically Actuated Spindle

016460864
D-WK-879-20-2: RNCC: 3 | RNVC: 2
D-WK-879-20: RNCC: D | RNVC: 9

13 Jul 2015

3040-01-646-0728
Mechanically Actuated Spindle

016460728
D-WK-879-20-22: RNCC: 3 | RNVC: 2
D-WH-879-20: RNCC: D | RNVC: 9

13 Jul 2015

3040-01-646-0714
Mechanically Actuated Spindle

016460714
D-WK-879-20-4: RNCC: 3 | RNVC: 2
D-WK-879-20: RNCC: D | RNVC: 9

13 Jul 2015

3040-01-646-0590
Disc Brake Caliper

016460590
7A40017: RNCC: 3 | RNVC: 2
7A40175REV J FIND NO 1: RNCC: 5 | RNVC: 1

10 Jul 2015

3040-01-646-0505
Shaft Collar

016460505
8A101: RNCC: 3 | RNVC: 2

10 Jul 2015

3040-01-646-0143
Straight Shaft

016460143
7379277-2: RNCC: 3 | RNVC: 2
7379277: RNCC: D | RNVC: 9

8 Jul 2015

3040-01-646-0132
Nonrotating Shaft Eye Bracket

016460132
5793: RNCC: 3 | RNVC: 2
5793: RNCC: 3 | RNVC: 9
4219074: RNCC: D | RNVC: 9

8 Jul 2015

3040-01-646-0114
Spur Gearshaft

016460114
8383526: RNCC: 3 | RNVC: 2

8 Jul 2015

3040-01-645-9482
Hose Reel Brake Wheel Assembly

016459482
7A40027: RNCC: 3 | RNVC: 2
7A40002 FIND NO. 2: RNCC: 5 | RNVC: 1

6 Jul 2015

3040-01-645-9280
Straight Shaft

016459280
12446559: RNCC: 3 | RNVC: 2

6 Jul 2015

3040-01-645-8926
Pivot Shaft Assembly

016458926
18413: RNCC: 3 | RNVC: 2
18413: RNCC: 3 | RNVC: 9
4189117: RNCC: D | RNVC: 9

2 Jul 2015

3040-01-645-8906
Brake Disc

016458906
12446496: RNCC: 3 | RNVC: 2

2 Jul 2015

3040-01-645-8793
Bell Crank Support

016458793
9511M24P07: RNCC: 3 | RNVC: 2

2 Jul 2015

3040-01-645-8703
Rigid Connecting Link

016458703
12542908: RNCC: 3 | RNVC: 2

1 Jul 2015

3040-01-645-8687
Nonaircraft Mechanical Actuator

016458687
D-WK-879-1-6: RNCC: 3 | RNVC: 2
FT80-2006-XPX-EX-XH-42440: RNCC: 3 | RNVC: 2
42440: RNCC: 3 | RNVC: 2
F-WK-879-1 REV F PC 6: RNCC: 5 | RNVC: 2

1 Jul 2015

3040-01-645-8627
Straight Shaft

016458627
6891868-31: RNCC: 3 | RNVC: 2

1 Jul 2015

3040-01-645-8506
Rigid Connecting Link

016458506
5252595: RNCC: 3 | RNVC: 2

1 Jul 2015

3040-01-645-8401
Spur Gearshaft

016458401
100562A1: RNCC: 3 | RNVC: 2

1 Jul 2015

3040-01-645-8333
Linear Actuating Cylinder Assembly

016458333
470955112: RNCC: 3 | RNVC: 2

30 Jun 2015

3040-01-645-8149
Extension Shaft

016458149
BFD310199: RNCC: 3 | RNVC: 2

30 Jun 2015

3040-01-645-8068
Rigid Connecting Link

016458068
CB54234-001: RNCC: 3 | RNVC: 2

29 Jun 2015

3040-01-645-7147
Linear Actuating Cylinder Assembly

016457147
301122: RNCC: 3 | RNVC: 9

25 Jun 2015

3040-01-645-6800
Hub Clamp

016456800
12990105: RNCC: 3 | RNVC: 2

24 Jun 2015

3040-01-645-6683
Shaft Collar

016456683
001-000234-000: RNCC: 3 | RNVC: 2

24 Jun 2015

3040-01-645-6190
Cylinder Support

016456190
301133: RNCC: 3 | RNVC: 9

23 Jun 2015

3040-01-645-6119
Cylinder Support

016456119
301137: RNCC: 3 | RNVC: 9

23 Jun 2015

3040-01-645-6102
Straight Shaft

016456102
4026AS312-6: RNCC: 3 | RNVC: 2
4026AS312: RNCC: D | RNVC: 9

23 Jun 2015

3040-01-645-6097
Shouldered Shaft

016456097
4026AS312-3: RNCC: 3 | RNVC: 2
4026AS312: RNCC: D | RNVC: 9

23 Jun 2015

3040-01-645-5420
Straight Shaft

016455420
CB51558-001: RNCC: 3 | RNVC: 2
CB51558-001: RNCC: 5 | RNVC: 9
CB51558: RNCC: D | RNVC: 9

19 Jun 2015

3040-01-645-5366
Bell Crank

016455366
6350993 ITEM 70: RNCC: 3 | RNVC: 2
690923: RNCC: 5 | RNVC: 2
6350993: RNCC: D | RNVC: 9

19 Jun 2015

3040-01-645-3800
Worm Shaft

016453800
993800-3: RNCC: 3 | RNVC: 2
993014-11 REV-ITEM 52: RNCC: D | RNVC: 9

13 Jun 2015

3040-01-645-3791
Worm Wheel Gearshaft

016453791
993240-1: RNCC: 3 | RNVC: 2
993014-11 REV-ITEM 50: RNCC: D | RNVC: 9

13 Jun 2015

3040-01-645-3628
Nonaircraft Mechanical Actuator

016453628
15662267-2: RNCC: 3 | RNVC: 2
15662267-2: RNCC: 3 | RNVC: 2
1H000000094: RNCC: C | RNVC: 1
XFC90: RNCC: C | RNVC: 1

12 Jun 2015

3040-01-645-2219
Straight Shaft

016452219
3392AS1759: RNCC: 3 | RNVC: 2
3392AS1759: RNCC: 5 | RNVC: 2

8 Jun 2015

3040-01-645-2215
Rigid Connecting Link

016452215
3392AS1756: RNCC: 3 | RNVC: 2
3392AS1756: RNCC: 5 | RNVC: 2

8 Jun 2015

3040-01-645-1830
Shouldered Shaft

016451830
02779428: RNCC: 3 | RNVC: 2
8239132: RNCC: 5 | RNVC: 2

5 Jun 2015

3040-01-645-1315
Straight Shaft

016451315
167-7107409-8: RNCC: 3 | RNVC: 1
H547-1720-8: RNCC: 5 | RNVC: 1
H574-0001-H5471720-08: RNCC: 5 | RNVC: 1
7383858-H5471720-08: RNCC: 5 | RNVC: 1
167-7107409-8D4: RNCC: 5 | RNVC: 2
7383858-H5471720-08D4: RNCC: 5 | RNVC: 2
H547-1720-8D4: RNCC: 5 | RNVC: 2
H574-0001-H5471720-08D4: RNCC: 5 | RNVC: 2

4 Jun 2015

3040-01-645-1305
Straight Shaft

016451305
167-7107409-7: RNCC: 3 | RNVC: 1
H547-1720-7: RNCC: 5 | RNVC: 1
H574-0001-H5471720-07: RNCC: 5 | RNVC: 1
7383858-H5471720-07: RNCC: 5 | RNVC: 1
167-7107409-7D4: RNCC: 5 | RNVC: 2
H547-1720-7D4: RNCC: 5 | RNVC: 2
H574-0001-H5471720-07D4: RNCC: 5 | RNVC: 2
7383858-H5471720-07D4: RNCC: 5 | RNVC: 2

4 Jun 2015

3040-01-645-1301
Shouldered Shaft

016451301
810200-1: RNCC: 3 | RNVC: 2
993014-11 REV.- ITEM NO. 18: RNCC: C | RNVC: 1

4 Jun 2015

3040-01-645-0567
Mechanical Drive Housing

016450567
4142343: RNCC: 3 | RNVC: 2

2 Jun 2015

3040-01-645-0445
Spring Plunger

016450445
3403A13: RNCC: 3 | RNVC: 2
3403A13: RNCC: 5 | RNVC: 2
09024B5140 FIND ITEM NO.24: RNCC: C | RNVC: 1
09024B5140: RNCC: D | RNVC: 9

1 Jun 2015

3040-01-644-9251
Rigid Connecting Link

016449251
12578446: RNCC: 3 | RNVC: 2

27 May 2015

3040-01-644-8950
Straight Shaft

016448950
7383858-H5257208-0022: RNCC: 3 | RNVC: 1
H525-7208-22: RNCC: 5 | RNVC: 1
H547-0001-H5257208-0022: RNCC: 5 | RNVC: 1
564-7108143-22: RNCC: 5 | RNVC: 1
564-7108143-22D4: RNCC: 5 | RNVC: 2
7383858-H5257208-0022D4: RNCC: 5 | RNVC: 2
H525-7208-22D4: RNCC: 5 | RNVC: 2
H547-0001-H5257208-0022D4: RNCC: 5 | RNVC: 2

26 May 2015

3040-01-644-8430
Shouldered Shaft

016448430
12578351: RNCC: 3 | RNVC: 2

21 May 2015

3040-01-644-8423
Shouldered Shaft

016448423
C3623: RNCC: 3 | RNVC: 2

21 May 2015

3040-01-644-8420
Shouldered Shaft

016448420
B3859: RNCC: 3 | RNVC: 2

21 May 2015

3040-01-644-8417
Shouldered Shaft

016448417
C3749: RNCC: 3 | RNVC: 2

21 May 2015

3040-01-644-7440
Bevel Gearshaft

016447440
803-5348084-XXX-27: RNCC: 3 | RNVC: 1
H547-0001-5348084-XXX-027: RNCC: 5 | RNVC: 1
5348084-XXX-027: RNCC: 5 | RNVC: 1
7383858-5348084-XXX-027: RNCC: 5 | RNVC: 1
5348084-XXX-027D4: RNCC: 5 | RNVC: 2
803-5348084-XXX-27D4: RNCC: 5 | RNVC: 2
7383858-5348084-XXX-027D4: RNCC: 5 | RNVC: 2
H547-0001-5348084-XXX-027D4: RNCC: 5 | RNVC: 2

18 May 2015

3040-01-644-7428
Linear Actuating Cylinder Assembly

016447428
D-108465-A-4: RNCC: 3 | RNVC: 9
8625443-1: RNCC: 5 | RNVC: 2

18 May 2015

3040-01-644-7295
Nonaircraft Mechanical Actuator

016447295
829038: RNCC: 3 | RNVC: 2
D11917: RNCC: D | RNVC: 9

18 May 2015

3040-01-644-7046
Shaft Collar

016447046
1551317: RNCC: 3 | RNVC: 2
T/M SECT 6 PG 4-7 ITEM 22: RNCC: 5 | RNVC: 2

16 May 2015

3040-01-644-6295
Shouldered Shaft

016446295
4071894: RNCC: 3 | RNVC: 2

14 May 2015

3040-01-644-6284
Bevel Gearshaft

016446284
7383858-H5470249-0133: RNCC: 3 | RNVC: 1
H547-0249-133: RNCC: 5 | RNVC: 1
H574-0001-H5470249-0133: RNCC: 5 | RNVC: 1
167-7106787-133: RNCC: 5 | RNVC: 1
167-7106787-133D4: RNCC: 5 | RNVC: 2
7383858-H5470249-0133D4: RNCC: 5 | RNVC: 2
H547-0249-133D4: RNCC: 5 | RNVC: 2
H574-0001-H5470249-0133D4: RNCC: 5 | RNVC: 2

14 May 2015

3040-01-644-5386
Body Hub

016445386
219559A1: RNCC: 3 | RNVC: 2

11 May 2015

3040-01-644-5392
Brake Backing Plate

016445392
12446617: RNCC: 3 | RNVC: 2

11 May 2015

3040-01-644-5375
Rigid Connecting Link

016445375
8-M8698-57-75: RNCC: 3 | RNVC: 2

11 May 2015

3040-01-644-4678
Rigid Connecting Link

016444678
167-7384258-79: RNCC: 3 | RNVC: 1
H5471905-079: RNCC: 5 | RNVC: 1
H547-0001-H5471905-079: RNCC: 5 | RNVC: 1
H547-1905-79: RNCC: 5 | RNVC: 1
7383858-H5471905-079: RNCC: 5 | RNVC: 1
H547-1905-79D4: RNCC: 5 | RNVC: 2
H5471905-079D4: RNCC: 5 | RNVC: 2
167-7384258-79D4: RNCC: 5 | RNVC: 2
7383858-H5471905-079D4: RNCC: 5 | RNVC: 2
H547-0001-H5471905-079D4: RNCC: 5 | RNVC: 2

7 May 2015

3040-01-644-4606
Straight Shaft

016444606
3991AS315-3: RNCC: 1 | RNVC: 2
F80030F: RNCC: 3 | RNVC: 9

6 May 2015

3040-01-644-4479
Rigid Connecting Link

016444479
595-7067876-59: RNCC: 3 | RNVC: 1
H692-1802-59: RNCC: 5 | RNVC: 1

6 May 2015

3040-01-644-4299
Shouldered Shaft

016444299
15669050-1: RNCC: 3 | RNVC: 2
15669059 REV A FIND NO 2: RNCC: C | RNVC: 1
15669050: RNCC: D | RNVC: 9
15669059: RNCC: D | RNVC: 9

5 May 2015

3040-01-644-3964
Shaft Collar

016443964
167-7384258-29: RNCC: 3 | RNVC: 1
H5471905-029: RNCC: 5 | RNVC: 1
7383858-H5471905-029: RNCC: 5 | RNVC: 1
H547-1905-29: RNCC: 5 | RNVC: 1
H547-0001-H5471905-029: RNCC: 5 | RNVC: 1
H547-1905-29: RNCC: 5 | RNVC: 1
167-7384258-29D4: RNCC: 5 | RNVC: 2
7383858-H5471905-029D4: RNCC: 5 | RNVC: 2
H547-0001-H5471905-029D4: RNCC: 5 | RNVC: 2
H5471905-029D4: RNCC: 5 | RNVC: 2

4 May 2015

3040-01-644-3679
Extension Shaft

016443679
8625508-1: RNCC: 3 | RNVC: 2

1 May 2015

3040-01-644-3475
Shaft Collar

016443475
167-7384258-21: RNCC: 3 | RNVC: 1
H5471905-021: RNCC: 5 | RNVC: 1
7383858-H5471905-021: RNCC: 5 | RNVC: 1
H547-0001-H5471905-021: RNCC: 5 | RNVC: 1
H547-1905-21: RNCC: 5 | RNVC: 1
167-7384258-21D4: RNCC: 5 | RNVC: 2
7383858-H5471905-021D4: RNCC: 5 | RNVC: 2
H547-0001-H5471905-021D4: RNCC: 5 | RNVC: 2
H547-1905-21D4: RNCC: 5 | RNVC: 2
H5471905-021D4: RNCC: 5 | RNVC: 2

1 May 2015

3040-01-644-3417
Shouldered Shaft

016443417
P000823: RNCC: 3 | RNVC: 2

30 Apr 2015

3040-01-644-3348
Gland Outer

016443348
167-7384258-19: RNCC: 3 | RNVC: 1
H5471905-019: RNCC: 5 | RNVC: 1
7383858-H5471905-019: RNCC: 5 | RNVC: 1
H547-0001-H5471905-019: RNCC: 5 | RNVC: 1
H547-1905-19: RNCC: 5 | RNVC: 1
167-7384258-19D4: RNCC: 5 | RNVC: 2
7383858-H5471905-019D4: RNCC: 5 | RNVC: 2
H547-0001-H5471905-019D4: RNCC: 5 | RNVC: 2
H5471905-019D4: RNCC: 5 | RNVC: 2
H547-1905-19D4: RNCC: 5 | RNVC: 2

30 Apr 2015

3040-01-644-3362
Gland Retainer

016443362
167-7384258-20: RNCC: 3 | RNVC: 1
H547-1905-20: RNCC: 5 | RNVC: 1
7383858-H5471905-020: RNCC: 5 | RNVC: 1
H547-0001-H5471905-020: RNCC: 5 | RNVC: 1
H5471905-020: RNCC: 5 | RNVC: 1
167-7384258-20D4: RNCC: 5 | RNVC: 2
7383858-H5471905-020D4: RNCC: 5 | RNVC: 2
H547-0001-H5471905-020D4: RNCC: 5 | RNVC: 2
H547-1905-20D4: RNCC: 5 | RNVC: 2
H5471905-020D4: RNCC: 5 | RNVC: 2

30 Apr 2015

3040-01-644-3318
Gland Inner

016443318
167-7384258-18: RNCC: 3 | RNVC: 1
7383858-H5471905-018: RNCC: 5 | RNVC: 1
H547-0001-H5471905-018: RNCC: 5 | RNVC: 1
H547-1905-18: RNCC: 5 | RNVC: 1
167-7384258-18D4: RNCC: 5 | RNVC: 2
7383858-H5471905-018D4: RNCC: 5 | RNVC: 2
H547-0001-H5471905-018D4: RNCC: 5 | RNVC: 2
H547-1905-18D4: RNCC: 5 | RNVC: 2

30 Apr 2015

3040-01-644-3108
Rigid Connecting Link

016443108
167-7384258-14: RNCC: 3 | RNVC: 1
H5471905-014: RNCC: 5 | RNVC: 1
7383858-H5471905-014: RNCC: 5 | RNVC: 1
H547-0001-H5471905-014: RNCC: 5 | RNVC: 1
H547-1905-14: RNCC: 5 | RNVC: 1
167-7384258-14D4: RNCC: 5 | RNVC: 2
7383858-H5471905-014D4: RNCC: 5 | RNVC: 2
H547-0001-H5471905-014D4: RNCC: 5 | RNVC: 2
H547-1905-14D4: RNCC: 5 | RNVC: 2
H5471905-014D4: RNCC: 5 | RNVC: 2

30 Apr 2015

3040-01-644-3099
Transmission Fluid Cooler

016443099
5-116-06-054-002: RNCC: 3 | RNVC: 2
5-116-06-054-002: RNCC: 5 | RNVC: 9

30 Apr 2015

3040-01-644-3048
Rigid Connecting Link

016443048
595-7067876-57: RNCC: 3 | RNVC: 2
H692-1802-57: RNCC: 5 | RNVC: 2
595-7067576: RNCC: D | RNVC: 9

29 Apr 2015

3040-01-644-2665
Rigid Connecting Link

016442665
167-7384258-13: RNCC: 3 | RNVC: 1
H5471905-013: RNCC: 5 | RNVC: 1
7383858-H5471905-013: RNCC: 5 | RNVC: 1
H547-0001-H5471905-013: RNCC: 5 | RNVC: 1
H547-1905-13: RNCC: 5 | RNVC: 1
167-7384258-13D4: RNCC: 5 | RNVC: 2
7383858-H5471905-013D4: RNCC: 5 | RNVC: 2
H547-0001-H5471905-013D4: RNCC: 5 | RNVC: 2
H547-1905-13D4: RNCC: 5 | RNVC: 2
H5471905-013D4: RNCC: 5 | RNVC: 2

28 Apr 2015

3040-01-644-2379
Flexible Drive Shaft

016442379
116983-1: RNCC: 3 | RNVC: 2

28 Apr 2015

3040-01-644-2040
Straight Shaft

016442040
153214: RNCC: 3 | RNVC: 2

24 Apr 2015

3040-01-644-2008
Extension Shaft

016442008
12590673: RNCC: 3 | RNVC: 2

24 Apr 2015

3040-01-644-1557
Housing Adapter

016441557
3590379: RNCC: 3 | RNVC: 2

23 Apr 2015

3040-01-644-1444
Mechanically Actuated Spindle

016441444
D-WK-879-62-4: RNCC: 3 | RNVC: 2
D-WK-879-62 REV L PC# 4: RNCC: C | RNVC: 1

22 Apr 2015

3040-01-644-0942
Air Clutch Outer Shaft End Cap

016440942
6032761-003: RNCC: 3 | RNVC: 2

22 Apr 2015

3040-01-644-0748
Brake Emtr-Enc

016440748
8287094: RNCC: 3 | RNVC: 2
8287000 ITEM 4: RNCC: 5 | RNVC: 1

21 Apr 2015

3040-01-644-0628
Counterbalance Weight

016440628
150.381: RNCC: 3 | RNVC: 2
A/326TNS/63 ITEM 23: RNCC: 5 | RNVC: 1

21 Apr 2015

3040-01-644-0618
Counterbalance Weight

016440618
150.382: RNCC: 3 | RNVC: 2
A/326TNS/63 ITEM 24: RNCC: 5 | RNVC: 1

21 Apr 2015

3040-01-644-0304
Electric Disc B

016440304
KFB 100: RNCC: 3 | RNVC: 2
8287096: RNCC: 3 | RNVC: 2
PINTSCH BAMAG MODEL KFB 100: RNCC: 3 | RNVC: 2
8287094 ITEM 2: RNCC: 5 | RNVC: 1

20 Apr 2015

3040-01-644-0013
Exhaust Tank

016440013
20861JA001: RNCC: 3 | RNVC: 2
588-8278195 LINE NO 196: RNCC: 5 | RNVC: 2

17 Apr 2015

3040-01-643-9988
Planetary Gears Carrier

016439988
3808647: RNCC: 3 | RNVC: 2
3808647: RNCC: 5 | RNVC: 9

17 Apr 2015

3040-01-643-9957
Hydraulic Accumulator

016439957
20861JB001: RNCC: 3 | RNVC: 2
588-8278194 LINE NO 197: RNCC: 5 | RNVC: 2

17 Apr 2015

3040-01-643-9836
Shaft Idler

016439836
12446347-1: RNCC: 3 | RNVC: 2

17 Apr 2015

3040-01-643-9826
Shaft Idler

016439826
12446346-1: RNCC: 3 | RNVC: 2

17 Apr 2015

3040-01-643-9619
Gearbox Assy Nrp

016439619
MHO58683-5: RNCC: 3 | RNVC: 2
F156013 REV E ITEM NO 54: RNCC: 5 | RNVC: 2
F167045: RNCC: 5 | RNVC: 2

17 Apr 2015

3040-01-643-9446
Remote Control Lever

016439446
5-17-5011-00: RNCC: 3 | RNVC: 2
611992-6-B: RNCC: 5 | RNVC: 9

16 Apr 2015

3040-01-643-8678
Straight Shaft

016438678
F160481: RNCC: 3 | RNVC: 2
F160480 ITEM 5: RNCC: 5 | RNVC: 2

15 Apr 2015

3040-01-643-8569
Mechanically Actuated Spindle

016438569
2235227: RNCC: 3 | RNVC: 2
C-2235227 REV D: RNCC: D | RNVC: 9

14 Apr 2015

3040-01-643-8565
Storage Tank

016438565
20861K001: RNCC: 3 | RNVC: 2
588-8278195 ITEM 207: RNCC: 5 | RNVC: 2

14 Apr 2015

3040-01-643-8092
Rigid Connecting Link

016438092
124-7386936: RNCC: 3 | RNVC: 2
124-7386972: RNCC: 5 | RNVC: 2

13 Apr 2015

3040-01-643-7755
Straight Shaft

016437755
4071895: RNCC: 3 | RNVC: 2

13 Apr 2015

3040-01-643-7744
Mechanical Drive Housing

016437744
3803465: RNCC: 3 | RNVC: 2

13 Apr 2015

3040-01-643-7731
Mechanical Drive Housing

016437731
3803464: RNCC: 3 | RNVC: 2
3803464: RNCC: 5 | RNVC: 9

13 Apr 2015

3040-01-643-7653
Control Cable Assembly

016437653
09024N5115: RNCC: 3 | RNVC: 2

13 Apr 2015

3040-01-643-7609
Cylinder Support

016437609
153962: RNCC: 3 | RNVC: 2

11 Apr 2015

3040-01-643-7603
Linear Actuating Cylinder Assembly

016437603
153578: RNCC: 3 | RNVC: 2

11 Apr 2015

3040-01-643-7574
Spur Gearshaft

016437574
291555A1: RNCC: 3 | RNVC: 2

11 Apr 2015

3040-01-643-7557
Spur Gearshaft

016437557
291553A1: RNCC: 3 | RNVC: 2

11 Apr 2015

3040-01-643-7513
Remote Control Lever

016437513
124-7386936 PC 38: RNCC: 3 | RNVC: 2
124-7386972 PC 65: RNCC: 5 | RNVC: 2

11 Apr 2015

3040-01-643-7508
Rigid Connecting Link

016437508
124-7386936 PC 28: RNCC: 3 | RNVC: 2

11 Apr 2015

3040-01-643-7504
Remote Control Lever

016437504
124-7386936 PC 36: RNCC: 3 | RNVC: 2

11 Apr 2015

3040-01-643-7209
Shouldered Shaft

016437209
F160495: RNCC: 3 | RNVC: 2
F1605555 REV- ITEM NO. 1: RNCC: C | RNVC: 1

10 Apr 2015

3040-01-643-7205
Straight Shaft

016437205
2B1-01972: RNCC: 3 | RNVC: 2
F160480 ITEM 24: RNCC: C | RNVC: 1

10 Apr 2015

3040-01-643-7186
Nonrotating Shaft Eye Bracket

016437186
7383858-H5471902A-A13: RNCC: 3 | RNVC: 1
H547-0001-H5471902A-A13: RNCC: 5 | RNVC: 1
H547-1902-A13: RNCC: 5 | RNVC: 1
167-7066802-A13: RNCC: 5 | RNVC: 1
167-7066802-A13D4: RNCC: 5 | RNVC: 2
7383858-H5471902A-A13D4: RNCC: 5 | RNVC: 2
H547-0001-H5471902A-A13D4: RNCC: 5 | RNVC: 2
H547-1902-A13D4: RNCC: 5 | RNVC: 2

10 Apr 2015

3040-01-643-7088
Bell Crank

016437088
12578129: RNCC: 3 | RNVC: 2

10 Apr 2015

3040-01-643-7084
Straight Shaft

016437084
12578253: RNCC: 3 | RNVC: 2

10 Apr 2015

3040-01-643-7014
Hoist Motor Brake

016437014
BH-4047: RNCC: 3 | RNVC: 2

9 Apr 2015

3040-01-643-6753
Mechanical Drive Housing

016436753
427253-01: RNCC: 3 | RNVC: 9
PL71126 PG 13 INDEX NO. 3: RNCC: 5 | RNVC: 9

9 Apr 2015

3040-01-643-6594
Brake Drum

016436594
611992-15A: RNCC: 3 | RNVC: 2
611992-6BMOD: RNCC: 3 | RNVC: 2
1-056-212-00-009-MOD: RNCC: 5 | RNVC: 2

8 Apr 2015

3040-01-643-6484
Mechanical Drive Housing

016436484
L61399G01: RNCC: 3 | RNVC: 2

8 Apr 2015

3040-01-643-6069
Toggle Spindle

016436069
D-WK-879-89-4: RNCC: 3 | RNVC: 2
D-WK-879-89 REV P PC# 4: RNCC: C | RNVC: 1

7 Apr 2015

3040-01-643-5331
Brake Disc

016435331
161-6417: RNCC: 3 | RNVC: 2
27321: RNCC: 5 | RNVC: 2

6 Apr 2015

3040-01-643-4730
Shouldered Shaft

016434730
974195: RNCC: 3 | RNVC: 2

2 Apr 2015

3040-01-643-4729
Shouldered Shaft

016434729
973156: RNCC: 3 | RNVC: 2

2 Apr 2015

3040-01-643-4715
Shaft Retaining Plate

016434715
3029042-001: RNCC: 3 | RNVC: 2

2 Apr 2015

3040-01-643-4544
Ballscrew Assembly

016434544
7383858-A63: RNCC: 3 | RNVC: 1
H547-0001-A63: RNCC: 5 | RNVC: 1
H547-1721-A3: RNCC: 5 | RNVC: 1
167-7108111-A3: RNCC: 5 | RNVC: 1
H547-0001-A63D4: RNCC: 5 | RNVC: 2
H547-1721-A3D4: RNCC: 5 | RNVC: 2
167-7108111-A3D4: RNCC: 5 | RNVC: 2
7383858-A63D4: RNCC: 5 | RNVC: 2

2 Apr 2015

3040-01-643-4333
Linear Actuating Cylinder Assembly

016434333
C-7010-DXP-00MC: RNCC: 3 | RNVC: 9
6475K194: RNCC: 5 | RNVC: 2
WK-891-3 PC NO 88: RNCC: 5 | RNVC: 2

1 Apr 2015

3040-01-643-3656
Nonaircraft Mechanical Actuator

016433656
12153/1S737100-020: RNCC: 3 | RNVC: 2
12153: RNCC: D | RNVC: 9

31 Mar 2015

3040-01-643-3615
Spur Gearshaft

016433615
9400.3073.4: RNCC: 3 | RNVC: 2
MPH3223 ITEM 520: RNCC: 5 | RNVC: 2

31 Mar 2015

3040-01-643-3583
Straight Shaft Assembly

016433583
7383858-H5257617-02: RNCC: 3 | RNVC: 1
H525-7617-2: RNCC: 5 | RNVC: 1
501-7066655-2: RNCC: 5 | RNVC: 1
H547-0001-H5257617-02: RNCC: 5 | RNVC: 1
H525-7617-2D4: RNCC: 5 | RNVC: 2
501-7066655-2D4: RNCC: 5 | RNVC: 2
7383858-H5257617-02D4: RNCC: 5 | RNVC: 2
H547-0001-H5257617-02D4: RNCC: 5 | RNVC: 2

31 Mar 2015

3040-01-643-3524
Actuator Nrp

016433524
D-WK-879-1-20: RNCC: 3 | RNVC: 2

30 Mar 2015

3040-01-643-3404
Spur Gearshaft

016433404
9400.3043.4: RNCC: 3 | RNVC: 2
MPH3223 ITEM 507: RNCC: 5 | RNVC: 2

30 Mar 2015

3040-01-643-3353
Shouldered Shaft

016433353
5182T26P01: RNCC: 3 | RNVC: 2
5182T26: RNCC: D | RNVC: 9

30 Mar 2015

3040-01-643-3228
Mechanical Drive Housing

016433228
39858-1: RNCC: 3 | RNVC: 2
39858: RNCC: D | RNVC: 9

30 Mar 2015

3040-01-643-3116
Shaft Collar

016433116
1C-075-S: RNCC: 3 | RNVC: 2
6435K36: RNCC: 5 | RNVC: 2

27 Mar 2015

3040-01-643-2894
Rigid Connecting Link

016432894
100588-1: RNCC: 3 | RNVC: 2

26 Mar 2015

3040-01-643-2875
Straight Shaft Assembly

016432875
7383858-H5257617-01: RNCC: 3 | RNVC: 1
501-7066655-1: RNCC: 5 | RNVC: 1
H525-7617-1: RNCC: 5 | RNVC: 1
H547-0001-H5257617-01: RNCC: 5 | RNVC: 1
7383858-H5257617-01D4: RNCC: 5 | RNVC: 2
H525-7617-1D4: RNCC: 5 | RNVC: 2
H547-0001-H5257617-01D4: RNCC: 5 | RNVC: 2
501-7066655-1D4: RNCC: 5 | RNVC: 2

26 Mar 2015

3040-01-643-2718
Linear Actuating Cylinder Assembly Parts Kit

016432718
L080710000: RNCC: 3 | RNVC: 2

26 Mar 2015

3040-01-643-2658
Rigid Connecting Link

016432658
7383858-H5257208-A4A: RNCC: 3 | RNVC: 1
H525-7208-A4: RNCC: 5 | RNVC: 1
H547-0001-H5257208-A4A: RNCC: 5 | RNVC: 1
564-7108143-A4: RNCC: 5 | RNVC: 1
564-7108143-A4D4: RNCC: 5 | RNVC: 2
7383858-H5257208-A4AD4: RNCC: 5 | RNVC: 2
H525-7208-A4D4: RNCC: 5 | RNVC: 2
H547-0001-H5257208-A4AD4: RNCC: 5 | RNVC: 2

26 Mar 2015

3040-01-643-2147
Push-Pull Control Assembly

016432147
KRF3000-TT-25: RNCC: 3 | RNVC: 2

24 Mar 2015

3040-01-643-2149
Push-Pull Control Assembly

016432149
KRF3000-TT-30: RNCC: 3 | RNVC: 2

24 Mar 2015

3040-01-643-2018
Rigid Connecting Link

016432018
31251885: RNCC: 3 | RNVC: 2

24 Mar 2015

3040-01-643-1566
Rigid Connecting Link

016431566
803-6397268 PC 169: RNCC: 3 | RNVC: 2
803-6397269 ASSY M-1: RNCC: 5 | RNVC: 2

23 Mar 2015

3040-01-643-1546
Ballscrew Assembly

016431546
8287056: RNCC: 1 | RNVC: 2
BA23531: RNCC: 3 | RNVC: 2
8287040 ITEM 7: RNCC: C | RNVC: 1

23 Mar 2015

3040-01-643-1116
Friction Lining

016431116
2046-028-00: RNCC: 3 | RNVC: 2

20 Mar 2015

3040-01-643-1016
Straight Shaft

016431016
PAAI052225: RNCC: 3 | RNVC: 2
DAAK105738 SEQ 001: RNCC: 5 | RNVC: 2

19 Mar 2015

3040-01-643-0798
Rigid Connecting Link

016430798
8508152: RNCC: 3 | RNVC: 2
850815 0: RNCC: 5 | RNVC: 9

19 Mar 2015

3040-01-643-0800
Control Cam

016430800
789562: RNCC: 3 | RNVC: 2

19 Mar 2015

3040-01-643-0490
Nonaircraft Mechanical Actuator

016430490
8287072: RNCC: 3 | RNVC: 2
8287000 ITEM 32: RNCC: C | RNVC: 1

18 Mar 2015

3040-01-643-0274
Control Cam

016430274
8M0001081: RNCC: 3 | RNVC: 2

17 Mar 2015

3040-01-642-9750
Ballscrew Assembly

016429750
R-55-1: RNCC: 3 | RNVC: 2
H5410252A-105: RNCC: 5 | RNVC: 9
H5410252A-105A: RNCC: 5 | RNVC: 9
167-6985280-105: RNCC: C | RNVC: 1
H541-0252-105: RNCC: C | RNVC: 1

16 Mar 2015

3040-01-642-9654
Control Cam

016429654
36-01-7856: RNCC: 3 | RNVC: 1
7383858-264367001-13: RNCC: 5 | RNVC: 1
845-7108792-13: RNCC: 5 | RNVC: 1
H547-0001-264367001-13: RNCC: 5 | RNVC: 1
2643-670-01-13: RNCC: 5 | RNVC: 1
H547-0001-264367001-13D4: RNCC: 5 | RNVC: 2
36-01-7856D4: RNCC: 5 | RNVC: 2
2643-670-01-13D4: RNCC: 5 | RNVC: 2
845-7108792-13D4: RNCC: 5 | RNVC: 2
7383858-264367001-13D4: RNCC: 5 | RNVC: 2

16 Mar 2015

3040-01-642-9645
Straight Shaft

016429645
7550477-G5473100-0233: RNCC: 3 | RNVC: 1
G547-0001-G5473100-0233: RNCC: 5 | RNVC: 1
7384568 PN 233: RNCC: 5 | RNVC: 1
G5473100-0233: RNCC: 5 | RNVC: 1
G547-3100 PN 233: RNCC: 5 | RNVC: 1
7550477-G5473100-0233D4: RNCC: 5 | RNVC: 2
G547-3100 PN 233D4: RNCC: 5 | RNVC: 2
7384568 PN 233D4: RNCC: 5 | RNVC: 2
G5473100-0233D4: RNCC: 5 | RNVC: 2
G547-0001-G5473100-0233D4: RNCC: 5 | RNVC: 2

16 Mar 2015

3040-01-642-9061
Shouldered Shaft

016429061
COM-12: RNCC: 3 | RNVC: 2

13 Mar 2015

3040-01-642-8860
Mechanical Drive Housing

016428860
10666675-011: RNCC: 3 | RNVC: 2
10666675: RNCC: D | RNVC: 9

12 Mar 2015

3040-01-642-8043
Rigid Connecting Link

016428043
406-010-426-101: RNCC: 3 | RNVC: 2

10 Mar 2015

3040-01-642-7936
Shouldered Shaft

016427936
F160614: RNCC: 3 | RNVC: 2
F160604 ITEM 5: RNCC: C | RNVC: 1
F160604: RNCC: D | RNVC: 9

10 Mar 2015

3040-01-642-7929
Part Kits Linear Ac

016427929
SKN5-650-16-AB: RNCC: 3 | RNVC: 2
SKN5-650-16-AB: RNCC: 5 | RNVC: 9

10 Mar 2015

3040-01-642-7577
Rigid Connecting Link

016427577
F170053: RNCC: 3 | RNVC: 2
F169943 REV - ITEM NO. 6: RNCC: C | RNVC: 1
F169943: RNCC: D | RNVC: 9

9 Mar 2015

3040-01-642-7568
Rigid Connecting Link

016427568
F170063: RNCC: 3 | RNVC: 2
F169943 REV - ITEM NO. 5: RNCC: C | RNVC: 1
F169943: RNCC: D | RNVC: 9

9 Mar 2015

3040-01-642-7127
Mechanically Actuated Spindle

016427127
167-7066792-37: RNCC: 3 | RNVC: 2
H547-1117-37: RNCC: 5 | RNVC: 2

5 Mar 2015

3040-01-642-7126
Mechanically Actuated Spindle

016427126
167-7106787-17: RNCC: 3 | RNVC: 2
H547-0249-17: RNCC: 5 | RNVC: 2

5 Mar 2015

3040-01-642-7056
Straight Shaft

016427056
OXP12X465: RNCC: 3 | RNVC: 2

5 Mar 2015

3040-01-642-6574
Nonvehicular Propeller Shaft

016426574
94148: RNCC: 3 | RNVC: 2

4 Mar 2015

3040-01-642-6273
Shouldered Shaft

016426273
1170482: RNCC: 3 | RNVC: 2

4 Mar 2015

3040-01-642-6200
Rigid Connecting Link

016426200
12578130: RNCC: 3 | RNVC: 2

3 Mar 2015

3040-01-642-5879
Worm Shaft

016425879
1178372: RNCC: 3 | RNVC: 2

3 Mar 2015

3040-01-642-5547
Shouldered Shaft

016425547
50271000 ITEM 14: RNCC: 3 | RNVC: 1
50271002-12: RNCC: 5 | RNVC: 1
50271002-12D4: RNCC: 5 | RNVC: 2
50271000 ITEM 14D4: RNCC: 5 | RNVC: 2

2 Mar 2015

3040-01-642-5406
Spur Gearshaft

016425406
6743948: RNCC: 3 | RNVC: 2
674398: RNCC: 5 | RNVC: 9

27 Feb 2015

3040-01-642-5358
Spur Gearshaft

016425358
6743947: RNCC: 3 | RNVC: 2

27 Feb 2015

3040-01-642-5287
Nonaircraft Mechanical Actuator

016425287
YE05-1(325-43455-000): RNCC: 3 | RNVC: 1

27 Feb 2015

3040-01-642-5249
Shouldered Shaft

016425249
845-7526489-2B-07-B-3-N-E-007: RNCC: 3 | RNVC: 2
845-7526489-2B-08-B-3-N-E-007: RNCC: 5 | RNVC: 2
845-7526489: RNCC: D | RNVC: 9

27 Feb 2015

3040-01-642-5130
Nonaircraft Mechanical Actuator

016425130
12153: RNCC: 3 | RNVC: 2
12153/1S737100-040: RNCC: 5 | RNVC: 2

27 Feb 2015

3040-01-642-5093
Nonaircraft Mechanical Actuator

016425093
26M01-5711-B: RNCC: 3 | RNVC: 1
26M01-5711-B1: RNCC: 5 | RNVC: 1
7550727-B1: RNCC: 5 | RNVC: 1
7550728-1: RNCC: 5 | RNVC: 1
7550728-2: RNCC: 5 | RNVC: 1
26M01-5711-B1D4: RNCC: 5 | RNVC: 2
26M01-5711-BD4: RNCC: 5 | RNVC: 2
7550727-B1D4: RNCC: 5 | RNVC: 2
7550728-1D4: RNCC: 5 | RNVC: 2
7550728-2D4: RNCC: 5 | RNVC: 2

27 Feb 2015

3040-01-642-5005
Linear Actuating Cylinder Assembly Parts Kit

016425005
SKN5-511-08: RNCC: 3 | RNVC: 2
SKN5-511-08: RNCC: 5 | RNVC: 9

26 Feb 2015

3040-01-642-4668
Master Autolock

016424668
845-7526489-2B-07-B-3-N-E-014: RNCC: 3 | RNVC: 2
845-7526489-2B-08-B-3-N-E-014: RNCC: 5 | RNVC: 2
845-7526489: RNCC: D | RNVC: 9

26 Feb 2015

3040-01-642-4639
Mechanical Drive Housing

016424639
845-7526489-2B-07-B-3-N-E-009: RNCC: 3 | RNVC: 2
845-7526489-2B-08-B-3-N-E-009: RNCC: 5 | RNVC: 2
845-7526489: RNCC: D | RNVC: 9

26 Feb 2015

3040-01-642-4635
Shouldered Shaft

016424635
845-7526489-2B-08-B-3-N-E-008: RNCC: 3 | RNVC: 2
845-7526489: RNCC: D | RNVC: 9

26 Feb 2015

3040-01-642-4584
Shouldered Shaft

016424584
845-7526489-2-6-A-3-N-D-7: RNCC: 3 | RNVC: 2
845-7526489: RNCC: D | RNVC: 9

26 Feb 2015

3040-01-642-4583
Shouldered Shaft

016424583
845-7526489-2-6-A-3-N-D-8: RNCC: 3 | RNVC: 2
845-7526489: RNCC: D | RNVC: 9

26 Feb 2015

3040-01-642-4312
Shouldered Shaft

016424312
845-7526489-XX-14-X-X-X-X-008: RNCC: 3 | RNVC: 2
845-7526489-2C-14-A-3-N-G-008: RNCC: 5 | RNVC: 2
845-7526489: RNCC: D | RNVC: 9

25 Feb 2015

3040-01-642-3517
Gear Drive Asembly

016423517
1394F96G01: RNCC: 3 | RNVC: 2
1394F70 FIND NO 14: RNCC: C | RNVC: 1

23 Feb 2015

3040-01-642-3324
Linear Actuating Cylinder Assembly

016423324
3176327981: RNCC: 3 | RNVC: 9

23 Feb 2015

3040-01-642-3332
Linear Actuating Cylinder Assembly

016423332
3222333518: RNCC: 3 | RNVC: 9

23 Feb 2015

3040-01-642-3286
Breather

016423286
3222318729: RNCC: 3 | RNVC: 9

23 Feb 2015

3040-01-642-3249
Linear Actuating Cylinder Assembly

016423249
9122182603: RNCC: 3 | RNVC: 9

23 Feb 2015

3040-01-642-3049
Control Cam

016423049
00-915335-00001: RNCC: 3 | RNVC: 2
PL-60074 ITEM 5: RNCC: 5 | RNVC: 2

20 Feb 2015

3040-01-642-2385
Ball Joint

016422385
XP103HS: RNCC: 3 | RNVC: 9

18 Feb 2015

3040-01-642-2013
Nonaircraft Mechanical Actuator

016422013
GSX50-0601-XXX-AB6-268-XH-XT-42-: RNCC: 3 | RNVC: 1
LINE-1: GSX50-0601-XXX-AB2-268-: RNCC: 5 | RNVC: 1
LINE-2: XH-XT-42265: RNCC: 5 | RNVC: 1
42265: RNCC: 5 | RNVC: 1
D-WK-879-1-7: RNCC: 5 | RNVC: 2
F-WK-879-1 REV F PC 7: RNCC: D | RNVC: 9

17 Feb 2015

3040-01-642-1683
Linear Actuating Cylinder Head

016421683
MIL-001-1085: RNCC: 3 | RNVC: 2

17 Feb 2015

3040-01-642-1271
Ballscrew Assembly

016421271
38091: RNCC: 3 | RNVC: 2

13 Feb 2015

3040-01-642-1114
Shaft Collar

016421114
501-7108142-43: RNCC: 3 | RNVC: 1
7383858-H5257207-043: RNCC: 5 | RNVC: 1
H547-0001-H5257207-043: RNCC: 5 | RNVC: 1
H525-7207-43: RNCC: 5 | RNVC: 1
H5257207-043: RNCC: 5 | RNVC: 1
7383858-H5257207-043D4: RNCC: 5 | RNVC: 2
501-7108142-43D4: RNCC: 5 | RNVC: 2
H5257207-043D4: RNCC: 5 | RNVC: 2
H525-7207-43D4: RNCC: 5 | RNVC: 2
H547-0001-H5257207-043D4: RNCC: 5 | RNVC: 2

12 Feb 2015

3040-01-642-0530
Multiple Gears Gearshaft

016420530
12546: RNCC: 3 | RNVC: 2

11 Feb 2015

3040-01-642-0261
Brake Band And Lining

016420261
08001653: RNCC: 3 | RNVC: 2
PL-08001601 FIND NO. 3: RNCC: C | RNVC: 1

10 Feb 2015

3040-01-642-0050
Spring Shaft

016420050
7384566 PN 57: RNCC: 3 | RNVC: 1
G547-2100 PN 57: RNCC: 5 | RNVC: 1
7550477-G5472100-057: RNCC: 5 | RNVC: 1
G5472100-057: RNCC: 5 | RNVC: 1
G547-0001-G5472100-057: RNCC: 5 | RNVC: 1
G5472100-057D4: RNCC: 5 | RNVC: 2
7384566 PN 57D4: RNCC: 5 | RNVC: 2
7550477-G5472100-057D4: RNCC: 5 | RNVC: 2
G547-0001-G5472100-057D4: RNCC: 5 | RNVC: 2
G547-2100 PN 57D4: RNCC: 5 | RNVC: 2

10 Feb 2015

3040-01-641-9868
Linear Actuating Cylinder Assembly

016419868
10666798-011: RNCC: 3 | RNVC: 2
10666798: RNCC: D | RNVC: 9

9 Feb 2015

3040-01-641-9783
Shaft Collar

016419783
21-466: RNCC: 3 | RNVC: 2

9 Feb 2015

3040-01-641-9529
Straight Shaft

016419529
S836CE: RNCC: 3 | RNVC: 1
SF-10446ITEM012: RNCC: 5 | RNVC: 1

7 Feb 2015

3040-01-641-8978
Straight Shaft Assembly

016418978
167-8204845 PC 26: RNCC: 3 | RNVC: 2
167-8200542 ASSY 82: RNCC: 5 | RNVC: 2
167-8200542: RNCC: D | RNVC: 9
167-8204845: RNCC: D | RNVC: 9

5 Feb 2015

3040-01-641-8937
Linear Actuating Cylinder Piston Rod

016418937
10666754-001: RNCC: 3 | RNVC: 2
10666754: RNCC: D | RNVC: 9

5 Feb 2015

3040-01-641-8648
Bell Crank

016418648
782-766609 ITEM 17: RNCC: 3 | RNVC: 2
782-766609: RNCC: D | RNVC: 9

4 Feb 2015

3040-01-641-8568
Rigid Connecting Link

016418568
167-8278268 ITEM 14: RNCC: 3 | RNVC: 2
167-8278268: RNCC: D | RNVC: 9

4 Feb 2015

3040-01-641-8523
Control Cable Assembly

016418523
281-8204: RNCC: 3 | RNVC: 2

4 Feb 2015

3040-01-641-8462
Shouldered Shaft

016418462
709-5343924 ITEM 073: RNCC: 3 | RNVC: 1
709-5486672 ITEM 073: RNCC: 5 | RNVC: 1
709-5343924 ITEM 073D4: RNCC: 5 | RNVC: 2
709-5486672 ITEM 073D4: RNCC: 5 | RNVC: 2

4 Feb 2015

3040-01-641-8428
Shouldered Shaft

016418428
709-5343924 ITEM 005: RNCC: 3 | RNVC: 1
709-5486672 ITEM 005: RNCC: 5 | RNVC: 1
709-5486672 ITEM 005D4: RNCC: 5 | RNVC: 2
709-5343924 ITEM 005D4: RNCC: 5 | RNVC: 2

4 Feb 2015

3040-01-641-8153
Bell Crank

016418153
167-8278268 ITEM 59: RNCC: 3 | RNVC: 2
167-8278268: RNCC: D | RNVC: 9

3 Feb 2015

3040-01-641-7808
Straight Shaft

016417808
516-5486658 ITEM 60: RNCC: 3 | RNVC: 1
516-5486658 ITEM 060: RNCC: 5 | RNVC: 1
516-5486658 ITEM 060D4: RNCC: 5 | RNVC: 2
516-5486658 ITEM 60D4: RNCC: 5 | RNVC: 2

3 Feb 2015

3040-01-641-7826
Rigid Connecting Link

016417826
516-5486658 ITEM 62: RNCC: 3 | RNVC: 1
516-5486658 ITEM 062: RNCC: 5 | RNVC: 1
516-5486658 ITEM 62D4: RNCC: 5 | RNVC: 2
516-5486658 ITEM 062D4: RNCC: 5 | RNVC: 2

3 Feb 2015

3040-01-641-7770
Remote Control Lever

016417770
516-5486658 ITEM 53: RNCC: 3 | RNVC: 1
516-5486658 ITEM 053: RNCC: 5 | RNVC: 1
516-5486658 ITEM 53D4: RNCC: 5 | RNVC: 2
516-5486658 ITEM 053D4: RNCC: 5 | RNVC: 2

3 Feb 2015

3040-01-641-7799
Rigid Connecting Link

016417799
516-5486658 ITEM 59: RNCC: 3 | RNVC: 1
516-5486658 ITEM 059: RNCC: 5 | RNVC: 1
516-5486658 ITEM 059D4: RNCC: 5 | RNVC: 2
516-5486658 ITEM 59D4: RNCC: 5 | RNVC: 2

3 Feb 2015

3040-01-641-7784
Rigid Connecting Link

016417784
516-5486658 ITEM 55: RNCC: 3 | RNVC: 1
516-5486658 ITEM 055: RNCC: 5 | RNVC: 1
516-5486658 ITEM 55D4: RNCC: 5 | RNVC: 2
516-5486658 ITEM 055D4: RNCC: 5 | RNVC: 2

3 Feb 2015

3040-01-641-7786
Rigid Connecting Link

016417786
516-5486658 ITEM 56: RNCC: 3 | RNVC: 1
516-5486658 ITEM 056: RNCC: 5 | RNVC: 1
516-5486658 ITEM 56D4: RNCC: 5 | RNVC: 2
516-5486658 ITEM 056D4: RNCC: 5 | RNVC: 2

3 Feb 2015

3040-01-641-7779
Remote Control Lever

016417779
516-5486658 ITEM 54: RNCC: 3 | RNVC: 1
516-5486658 ITEM 054: RNCC: 5 | RNVC: 1
516-5486658 ITEM 054D4: RNCC: 5 | RNVC: 2
516-5486658 ITEM 54D4: RNCC: 5 | RNVC: 2

3 Feb 2015

3040-01-641-7735
Shouldered Shaft

016417735
516-5486658 ITEM 52: RNCC: 3 | RNVC: 1
516-5486658 ITEM 052: RNCC: 5 | RNVC: 1
516-5486658 ITEM 52D4: RNCC: 5 | RNVC: 2
516-5486658 ITEM 052D4: RNCC: 5 | RNVC: 2

2 Feb 2015

3040-01-641-7710
Hanger Adapter

016417710
516-5486658 ITEM 40: RNCC: 3 | RNVC: 1
516-5486658 ITEM 040: RNCC: 5 | RNVC: 1
516-5486658 ITEM 040D4: RNCC: 5 | RNVC: 2
516-5486658 ITEM 40D4: RNCC: 5 | RNVC: 2

2 Feb 2015

3040-01-641-7665
Straight Shaft

016417665
25213-8: RNCC: 3 | RNVC: 2

2 Feb 2015

3040-01-641-7476
Linear Actuating Cylinder Piston Rod

016417476
MIL-001-1078: RNCC: 3 | RNVC: 2

31 Jan 2015

3040-01-641-7475
Pneumatic Actuator Cylinder Housing

016417475
MIL-001-1075: RNCC: 3 | RNVC: 2

31 Jan 2015

3040-01-641-7470
Pneumatic Actuator Cylinder Housing

016417470
MIL-001-1549: RNCC: 3 | RNVC: 2

31 Jan 2015

3040-01-641-7467
Pneumatic Actuator Cylinder Housing

016417467
MIL-001-1561: RNCC: 3 | RNVC: 2

31 Jan 2015

3040-01-641-7463
Linear Actuating Cylinder Piston

016417463
MIL-001-1552: RNCC: 3 | RNVC: 2

31 Jan 2015

3040-01-641-7270
Rigid Connecting Link

016417270
782-7666609 ITEM 49: RNCC: 3 | RNVC: 2

30 Jan 2015

3040-01-641-7012
Shouldered Shaft

016417012
516-5486658 ITEM 29: RNCC: 3 | RNVC: 1
516-5486658 ITEM 029: RNCC: 5 | RNVC: 1
516-5486658 ITEM 29D4: RNCC: 5 | RNVC: 2
516-5486658 ITEM 029D4: RNCC: 5 | RNVC: 2

29 Jan 2015

3040-01-641-6927
Mechanical Drive Housing

016416927
10666676-001: RNCC: 3 | RNVC: 2
10666676: RNCC: D | RNVC: 9

29 Jan 2015

3040-01-641-6819
Straight Shaft

016416819
4127020: RNCC: 3 | RNVC: 2
4127020: RNCC: D | RNVC: 9

29 Jan 2015

3040-01-641-6791
Shaft Collar

016416791
803-7550727-9: RNCC: 3 | RNVC: 1
26M01-5711-9: RNCC: 5 | RNVC: 1
26M01-5711-9D4: RNCC: 5 | RNVC: 2
803-7550727-9D4: RNCC: 5 | RNVC: 2

29 Jan 2015

3040-01-641-6771
Mechanical Drive Housing

016416771
803-7550727-7: RNCC: 3 | RNVC: 1
26M01-5711-7: RNCC: 5 | RNVC: 1
26M01-5711-7D4: RNCC: 5 | RNVC: 2
803-7550727-7D4: RNCC: 5 | RNVC: 2

29 Jan 2015

3040-01-641-6767
Shouldered Shaft

016416767
25214-1: RNCC: 3 | RNVC: 2
25214: RNCC: D | RNVC: 9

29 Jan 2015

3040-01-641-6766
Linear Actuating Cylinder Cap

016416766
803-7550727-5: RNCC: 3 | RNVC: 1
26M01-5711-5: RNCC: 5 | RNVC: 1
803-7550727-5D4: RNCC: 5 | RNVC: 2
26M01-5711-5D4: RNCC: 5 | RNVC: 2

29 Jan 2015

3040-01-641-6772
Ballscrew Assembly

016416772
803-7550727-8: RNCC: 3 | RNVC: 1
26M01-5711-8: RNCC: 5 | RNVC: 1
7833319: RNCC: 5 | RNVC: 1
26M01-5711-8D4: RNCC: 5 | RNVC: 2
7833319D4: RNCC: 5 | RNVC: 2
803-7550727-8D4: RNCC: 5 | RNVC: 2

29 Jan 2015

3040-01-641-6693
Shouldered Shaft

016416693
803-7550727-2: RNCC: 3 | RNVC: 1
26M01-5711-2: RNCC: 5 | RNVC: 1
803-7550727-2D4: RNCC: 5 | RNVC: 2
26M01-5711-2D4: RNCC: 5 | RNVC: 2

28 Jan 2015

3040-01-641-6699
Housing Adapter

016416699
803-7550727-4: RNCC: 3 | RNVC: 1
26M01-5711-4: RNCC: 5 | RNVC: 1
803-7550727-4D4: RNCC: 5 | RNVC: 2
26M01-5711-4D4: RNCC: 5 | RNVC: 2

28 Jan 2015

3040-01-641-6501
Power Transmission Equipment Brake Band

016416501
5D2-02099: RNCC: 3 | RNVC: 2
138383 REV B ITEM 1: RNCC: 5 | RNVC: 2
138383: RNCC: D | RNVC: 9

28 Jan 2015

3040-01-641-6494
Power Transmission Equipment Brake Band

016416494
5D2-02100: RNCC: 3 | RNVC: 2
F138383 REV B ITEM 2: RNCC: 5 | RNVC: 2

28 Jan 2015

3040-01-641-6085
Shouldered Shaft

016416085
45M-507: RNCC: 3 | RNVC: 1
EAOM-524S-NF2-3WITEM2: RNCC: 5 | RNVC: 1

27 Jan 2015

3040-01-641-5661
Shouldered Shaft

016415661
10666666-001: RNCC: 3 | RNVC: 2
10666666: RNCC: D | RNVC: 9

26 Jan 2015

3040-01-641-5088
Nonaircraft Mechanical Actuator

016415088
167-8278280 ASSY 98: RNCC: 3 | RNVC: 1
8278280: RNCC: D | RNVC: 9

23 Jan 2015

Load More Results