What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 162 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 162 of 300

3040-01-672-3111
Flexible Shaft Assembly Core

016723111
22001-100 X 54IN: RNCC: 3 | RNVC: 2
22001-100 X 4FT 6IN: RNCC: 5 | RNVC: 2

26 Apr 2018

3040-01-672-2983
Flexible Shaft Assembly

016722983
22001-100 X 222IN: RNCC: 3 | RNVC: 2
22001-100 X 18FT 6IN: RNCC: 5 | RNVC: 2

26 Apr 2018

3040-01-672-2976
Flexible Shaft Assembly

016722976
22001-100 X 28IN: RNCC: 3 | RNVC: 2
22001-100 X 2FT 4IN: RNCC: 5 | RNVC: 2

26 Apr 2018

3040-01-672-2952
Flexible Shaft Assembly

016722952
22001-100 X 42IN: RNCC: 3 | RNVC: 2
22001-100 X 3FT 6IN: RNCC: 5 | RNVC: 2

26 Apr 2018

3040-01-672-2926
Flexible Shaft Assembly

016722926
22001-100 X 24IN: RNCC: 3 | RNVC: 2
22001-100 X 2FT: RNCC: 5 | RNVC: 2

26 Apr 2018

3040-01-672-2903
Flexible Shaft Assembly

016722903
22001-100 X 48IN: RNCC: 3 | RNVC: 2
22001-100 X 4FT: RNCC: 5 | RNVC: 2

26 Apr 2018

3040-01-672-2128
Pivot Shaft Assembly

016722128
8499940-39: RNCC: 3 | RNVC: 2
8499940: RNCC: D | RNVC: 9

24 Apr 2018

3040-01-672-1774
Linear Actuating Cylinder Assembly

016721774
1H000138927: RNCC: 3 | RNVC: 2

24 Apr 2018

3040-01-672-1647
Linear Actuating Cylinder Assembly

016721647
0200HHC00150NC0100S2-S010P26/Y03: RNCC: 3 | RNVC: 2

23 Apr 2018

3040-01-672-1607
Flexible Drive Shaft

016721607
06302-10131-101: RNCC: 3 | RNVC: 2

23 Apr 2018

3040-01-672-1585
Rigid Connecting Link

016721585
2WSH43525-0002: RNCC: 3 | RNVC: 2

23 Apr 2018

3040-01-672-1098
Rigid Connecting Link

016721098
8499940-22: RNCC: 3 | RNVC: 2

23 Apr 2018

3040-01-672-1100
Rigid Connecting Link

016721100
8499940-23: RNCC: 3 | RNVC: 2

23 Apr 2018

3040-01-672-1096
Rigid Connecting Link

016721096
8499940-20: RNCC: 3 | RNVC: 2

23 Apr 2018

3040-01-672-0765
Flexible Shaft Assembly

016720765
57353-13FT0IN: RNCC: 3 | RNVC: 2

20 Apr 2018

3040-01-672-0429
Shouldered Shaft

016720429
PA12654666: RNCC: 3 | RNVC: 2

19 Apr 2018

3040-01-672-0434
Shouldered Shaft

016720434
PA12654665: RNCC: 3 | RNVC: 2

19 Apr 2018

3040-01-671-9782
Flexible Shaft Assembly

016719782
06371-05802-102: RNCC: 3 | RNVC: 2

17 Apr 2018

3040-01-671-9676
Tension Spring Assembly

016719676
ST482-11: RNCC: 3 | RNVC: 2
2WSV64908-0002: RNCC: 7 | RNVC: 2

17 Apr 2018

3040-01-671-9587
Flexible Shaft Assembly

016719587
06371-05801-101: RNCC: 3 | RNVC: 2

17 Apr 2018

3040-01-671-9556
Rigid Connecting Link

016719556
2WSH64598-0003: RNCC: 3 | RNVC: 2

17 Apr 2018

3040-01-671-9084
Rigid Connecting Link

016719084
2WSH64968-0001: RNCC: 3 | RNVC: 2

16 Apr 2018

3040-01-671-9051
Rigid Connecting Link

016719051
2WSH64903-0001: RNCC: 3 | RNVC: 2

16 Apr 2018

3040-01-671-8484
Rigid Connecting Link

016718484
102154-1: RNCC: 3 | RNVC: 2

12 Apr 2018

3040-01-671-8094
Rigid Connecting Link

016718094
35-28074-1: RNCC: 3 | RNVC: 2

11 Apr 2018

3040-01-671-8076
Rigid Connecting Link

016718076
2SJJ03162-0001: RNCC: 3 | RNVC: 2

11 Apr 2018

3040-01-671-7636
Flexible Shaft Assembly Core

016717636
57353-17FT: RNCC: 3 | RNVC: 2

10 Apr 2018

3040-01-671-7220
Cam Follower Mount

016717220
2SJJ03239-0001: RNCC: 3 | RNVC: 2

9 Apr 2018

3040-01-671-7152
Flexible Shaft Assembly Core

016717152
57353-21FT: RNCC: 3 | RNVC: 2
57353-252: RNCC: 5 | RNVC: 2

9 Apr 2018

3040-01-671-7127
Flexible Shaft Assembly Core

016717127
57353-19FT: RNCC: 3 | RNVC: 2
57353-228: RNCC: 5 | RNVC: 2

9 Apr 2018

3040-01-671-6791
Straight Shaft Assembly

016716791
57631-00: RNCC: 3 | RNVC: 2

6 Apr 2018

3040-01-671-6631
Flexible Shaft Assembly Core

016716631
57353-46: RNCC: 3 | RNVC: 2
505-8656151 F-5 ITEM NO. 10: RNCC: 5 | RNVC: 9

5 Apr 2018

3040-01-671-6613
Flexible Shaft Assembly Core

016716613
57353-22: RNCC: 3 | RNVC: 2
505-8656151 F-23 ITEM NO. 10: RNCC: 5 | RNVC: 9

5 Apr 2018

3040-01-671-6590
Flexible Shaft Assembly Core

016716590
57353-32127: RNCC: 3 | RNVC: 2
505-8656151 F-30 ITEM NO. 13: RNCC: 5 | RNVC: 9

5 Apr 2018

3040-01-671-6587
Flexible Shaft Assembly Core

016716587
57353-125: RNCC: 3 | RNVC: 2
505-8656151 F-29 ITEM NO. 30: RNCC: 5 | RNVC: 9

5 Apr 2018

3040-01-671-6585
Flexible Shaft Assembly Core

016716585
57353-54: RNCC: 3 | RNVC: 2
505-8656151 F-35 ITEM NO. 12: RNCC: 5 | RNVC: 9

5 Apr 2018

3040-01-671-6576
Flexible Shaft Assembly Core

016716576
57353-26: RNCC: 3 | RNVC: 2
505-8656151 F-37 ITEM NO. 10: RNCC: 5 | RNVC: 9

5 Apr 2018

3040-01-671-6572
Flexible Shaft Assembly Core

016716572
57353-32: RNCC: 3 | RNVC: 2
505-8656151 F-17 ITEM NO. 10: RNCC: 5 | RNVC: 9

5 Apr 2018

3040-01-671-6468
Line Shaft Port

016716468
243-7568853 FIND 50003: RNCC: 3 | RNVC: 2
243-7568853 FIND 50003: RNCC: 3 | RNVC: 2

5 Apr 2018

3040-01-671-6465
Line Shaft Port

016716465
243-7568853 FIND 100007: RNCC: 3 | RNVC: 2
243-7568853 FIND 100007: RNCC: 3 | RNVC: 2

5 Apr 2018

3040-01-671-6466
Line Shaft Port

016716466
243-7568853 FIND 70002: RNCC: 3 | RNVC: 2
243-7568853 FIND 70002: RNCC: 3 | RNVC: 2

5 Apr 2018

3040-01-671-6467
Line Shaft Port

016716467
243-7568853 FIND 110006: RNCC: 3 | RNVC: 2
243-7568853 FIND 110006: RNCC: 3 | RNVC: 2

5 Apr 2018

3040-01-671-6464
Line Shaft Port

016716464
243-7568853 FIND 80002: RNCC: 3 | RNVC: 2
243-7568853 FIND 80002: RNCC: 3 | RNVC: 2

5 Apr 2018

3040-01-671-6461
Line Shaft Port

016716461
243-7568853 FIND 40002: RNCC: 3 | RNVC: 2
243-7568853 FIND 40002: RNCC: 3 | RNVC: 2

5 Apr 2018

3040-01-671-6463
Line Shaft Port 3

016716463
243-7568853 FIND 30004: RNCC: 3 | RNVC: 2
243-7568853 FIND 30004: RNCC: 3 | RNVC: 2

5 Apr 2018

3040-01-671-6457
Line Shaft Port

016716457
243-7568853 FIND 130002: RNCC: 3 | RNVC: 2
243-7568853 FIND 130002: RNCC: 3 | RNVC: 2

5 Apr 2018

3040-01-671-6462
Line Shaft Port

016716462
243-7568853 FIND 20002: RNCC: 3 | RNVC: 2
243-7568853 FIND 20002: RNCC: 3 | RNVC: 2

5 Apr 2018

3040-01-671-6459
Line Shaft Port

016716459
243-7568853 FIND 120002: RNCC: 3 | RNVC: 2
243-7568853 FIND 120002: RNCC: 3 | RNVC: 2

5 Apr 2018

3040-01-671-6460
Line Shaft Port

016716460
243-7568853 FIND 90002: RNCC: 3 | RNVC: 2
243-7568853 FIND 90001: RNCC: 3 | RNVC: 2

5 Apr 2018

3040-01-671-6458
Line Shaft Port

016716458
243-7568853 FIND 60002: RNCC: 3 | RNVC: 2
243-7568853 FIND 60002: RNCC: 3 | RNVC: 2

5 Apr 2018

3040-01-671-5280
Linear Actuating Cylinder Cap

016715280
803-6397262 PC56: RNCC: 3 | RNVC: 2
803-6397262: RNCC: D | RNVC: 9

2 Apr 2018

3040-01-671-5268
Flexible Shaft Assembly Core

016715268
57353-00 104FT: RNCC: 3 | RNVC: 2
8587365 REV-ITEM F-109: RNCC: C | RNVC: 1

2 Apr 2018

3040-01-671-5273
Flexible Shaft Assembly Core

016715273
57353-28: RNCC: 3 | RNVC: 2
505-8656151 F-18 ITEM NO. 10: RNCC: C | RNVC: 1

2 Apr 2018

3040-01-671-5271
Flexible Shaft Assembly Core

016715271
57353-15FT: RNCC: 3 | RNVC: 2
57353: RNCC: D | RNVC: 9

2 Apr 2018

3040-01-671-4999
Bevel Gearshaft

016714999
904124-01: RNCC: 3 | RNVC: 2

30 Mar 2018

3040-01-671-4901
Shouldered Shaft

016714901
205903-25: RNCC: 3 | RNVC: 2

29 Mar 2018

3040-01-671-4817
Shouldered Shaft

016714817
12012H5380: RNCC: 3 | RNVC: 2

29 Mar 2018

3040-01-671-4795
Rigid Connecting Link

016714795
12012H4401: RNCC: 3 | RNVC: 2

29 Mar 2018

3040-01-671-4759
Rigid Connecting Link

016714759
02199990000: RNCC: 3 | RNVC: 2
19980: RNCC: D | RNVC: 9

29 Mar 2018

3040-01-671-4595
Remote Control Lever

016714595
835028A0907: RNCC: 3 | RNVC: 2

28 Mar 2018

3040-01-671-4428
Straight Shaft

016714428
AO123810: RNCC: 3 | RNVC: 2
AO123810: RNCC: 5 | RNVC: 2

28 Mar 2018

3040-01-671-4424
Housing Adapter

016714424
AO23812: RNCC: 3 | RNVC: 2
AO23812: RNCC: 5 | RNVC: 2

28 Mar 2018

3040-01-671-3924
Mechanical Drive Housing Part

016713924
03057643: RNCC: 3 | RNVC: 2

26 Mar 2018

3040-01-671-2393
Spline Drive Housing

016712393
8555098: RNCC: 3 | RNVC: 2

20 Mar 2018

3040-01-671-2227
Engine Drive Shaft

016712227
06302-10131-106: RNCC: 3 | RNVC: 2

20 Mar 2018

3040-01-671-2194
Cylinder Support

016712194
3972AS211-1: RNCC: 3 | RNVC: 2
3972AS211-1: RNCC: 5 | RNVC: 2

20 Mar 2018

3040-01-671-1528
Engine Drive Shaft

016711528
06302-10131-103: RNCC: 3 | RNVC: 2

16 Mar 2018

3040-01-671-1418
Iss Shaft

016711418
06371-03801-101: RNCC: 3 | RNVC: 2

15 Mar 2018

3040-01-671-1288
Linear Actuating Cylinder

016711288
63D52654-4: RNCC: 3 | RNVC: 2

15 Mar 2018

3040-01-671-1284
Linear Actuating Cylinder Cap

016711284
63C52653-7: RNCC: 3 | RNVC: 2

15 Mar 2018

3040-01-671-1287
Linear Actuating Cylinder

016711287
63D52636-3: RNCC: 3 | RNVC: 2

15 Mar 2018

3040-01-671-1275
Linear Actuating Cylinder Cap

016711275
63C52637-9: RNCC: 3 | RNVC: 2

15 Mar 2018

3040-01-671-1274
Body Hub

016711274
63C52594-7-9: RNCC: 3 | RNVC: 2

15 Mar 2018

3040-01-671-1268
Friction Lining Set

016711268
63B52572-7: RNCC: 3 | RNVC: 2

15 Mar 2018

3040-01-671-1267
Special Brake Spring

016711267
63B52571-7: RNCC: 3 | RNVC: 2

15 Mar 2018

3040-01-671-1260
Rotating Shaft Eye Bracket

016711260
56E23555-17: RNCC: 3 | RNVC: 2

15 Mar 2018

3040-01-671-1252
Linear Actuating Cylinder Cap

016711252
56B23545-7: RNCC: 3 | RNVC: 2

15 Mar 2018

3040-01-671-1244
Shouldered Axle

016711244
53C26652: RNCC: 3 | RNVC: 2

15 Mar 2018

3040-01-671-1150
Linear Actuating Cylinder

016711150
65210: RNCC: 3 | RNVC: 2

15 Mar 2018

3040-01-671-0772
Shouldered Shaft

016710772
2SJJ03001-0001: RNCC: 3 | RNVC: 2

15 Mar 2018

3040-01-671-0721
Shaft Collar

016710721
2SJJ01795-0001: RNCC: 3 | RNVC: 2

15 Mar 2018

3040-01-671-0577
Shouldered Shaft

016710577
2SJJ00180-0002: RNCC: 3 | RNVC: 2

15 Mar 2018

3040-01-671-0511
Hydraulic Accumulator

016710511
ACP04AA016E1KTB: RNCC: 3 | RNVC: 2

15 Mar 2018

3040-01-671-0355
Flexible Drive Shaft

016710355
SY6260700-103: RNCC: 3 | RNVC: 2

15 Mar 2018

3040-01-671-0349
Mechanical Drive Housing

016710349
SY6260200-201: RNCC: 3 | RNVC: 2

15 Mar 2018

3040-01-670-9705
Shouldered Shaft

016709705
06371-03803-101: RNCC: 3 | RNVC: 2

14 Mar 2018

3040-01-670-9427
Actuating Cylinder

016709427
2581761-1: RNCC: 3 | RNVC: 2
2581761-1: RNCC: 3 | RNVC: 9
2581761-1: RNCC: C | RNVC: 1

13 Mar 2018

3040-01-670-9307
Shouldered Shaft

016709307
9965.0031: RNCC: 3 | RNVC: 2
ISO 177 ITEM NO 03E: RNCC: D | RNVC: 9

13 Mar 2018

3040-01-670-9093
Straight Shaft Assembly

016709093
06380-05150-041: RNCC: 3 | RNVC: 2

12 Mar 2018

3040-01-670-8471
Straight Shaft

016708471
7-217221103-3: RNCC: 3 | RNVC: 2

8 Mar 2018

3040-01-670-8344
Rigid Connecting Link

016708344
167-6926191 REV E PC NO 190: RNCC: 3 | RNVC: 9
167-6926191 PC 190: RNCC: 5 | RNVC: 2

8 Mar 2018

3040-01-670-7840
Control Cam Assembly

016707840
7556781-39: RNCC: 3 | RNVC: 9

6 Mar 2018

3040-01-670-7214
Mechanical Drive Housing Part

016707214
03057635: RNCC: 3 | RNVC: 2

2 Mar 2018

3040-01-670-6982
Shouldered Shaft

016706982
4G10948H01: RNCC: 3 | RNVC: 2
PL4G10900 ITEM 141: RNCC: 5 | RNVC: 1
4G10900 ITEM 141: RNCC: 5 | RNVC: 1
4G10900: RNCC: D | RNVC: 9

1 Mar 2018

3040-01-670-6449
Nonaircraft Mechanical Actuator

016706449
MV31: RNCC: 3 | RNVC: 2

28 Feb 2018

3040-01-670-6412
Rigid Connecting Link

016706412
06300-10803-111: RNCC: 3 | RNVC: 2

28 Feb 2018

3040-01-670-6396
Straight Shaft

016706396
R902007453: RNCC: 3 | RNVC: 2
03316870: RNCC: 5 | RNVC: 2

28 Feb 2018

3040-01-670-6249
Rigid Connecting Link

016706249
06306-02100-055: RNCC: 3 | RNVC: 2

28 Feb 2018

3040-01-670-6246
Rigid Connecting Link

016706246
06306-10123-043: RNCC: 3 | RNVC: 2

28 Feb 2018

3040-01-670-6235
Shaft Retaining Plate

016706235
A34203-14: RNCC: 3 | RNVC: 9

28 Feb 2018

3040-01-670-5389
Linear Actuating Cylinder Assembly

016705389
N7259: RNCC: 3 | RNVC: 2

27 Feb 2018

3040-01-670-4065
Linear Actuating Cylinder Assembly

016704065
12012H4300: RNCC: 3 | RNVC: 2

21 Feb 2018

3040-01-670-4058
Linear Actuating Cylinder Assembly

016704058
12012H4301: RNCC: 3 | RNVC: 2

21 Feb 2018

3040-01-670-3757
Nonrotating Shaft Eye Bracket

016703757
835028A0164: RNCC: 3 | RNVC: 2

20 Feb 2018

3040-01-670-3744
Linear Actuating Cylinder Assembly

016703744
12012H4406: RNCC: 3 | RNVC: 2

20 Feb 2018

3040-01-670-3516
Shouldered Shaft

016703516
BB-9002644-01: RNCC: 3 | RNVC: 1

20 Feb 2018

3040-01-670-3241
Rigid Connecting Link

016703241
12012H4200: RNCC: 3 | RNVC: 2

15 Feb 2018

3040-01-670-3225
Rigid Connecting Link

016703225
167-6926191 PC 59: RNCC: 3 | RNVC: 2
167-6926191 REV E PC NO 59: RNCC: 5 | RNVC: 2
167-6926191: RNCC: D | RNVC: 9

15 Feb 2018

3040-01-670-2930
Rigid Connecting Link

016702930
167-6926191 PC 65: RNCC: 3 | RNVC: 2
167-6926191 REV E PC NO 65: RNCC: 5 | RNVC: 2
167-6926191: RNCC: D | RNVC: 9

14 Feb 2018

3040-01-670-2927
Rigid Connecting Link

016702927
167-6926191 PC70: RNCC: 3 | RNVC: 2
167-6926191 REV E PC NO 70: RNCC: 5 | RNVC: 2
167-6926191: RNCC: D | RNVC: 9

14 Feb 2018

3040-01-670-2695
Shear Collar

016702695
HST1571YNWT-12: RNCC: 3 | RNVC: 2
HST1571YNWT12: RNCC: 3 | RNVC: 2

13 Feb 2018

3040-01-670-2696
Shear Collar

016702696
HST1596YN5ATFW: RNCC: 3 | RNVC: 2

13 Feb 2018

3040-01-670-2415
Rigid Connecting Link

016702415
5041-1W: RNCC: 3 | RNVC: 2

13 Feb 2018

3040-01-670-2296
Rigid Connecting Link

016702296
167-6926191 PC 71: RNCC: 3 | RNVC: 2
167-6926191 REV E PC NO 71: RNCC: 5 | RNVC: 2
167-6926191: RNCC: D | RNVC: 9

12 Feb 2018

3040-01-670-2266
Linear Actuating Cylinder Assembly

016702266
12012H4400: RNCC: 3 | RNVC: 2

12 Feb 2018

3040-01-670-2265
Shouldered Shaft

016702265
12012H5390: RNCC: 3 | RNVC: 2

12 Feb 2018

3040-01-670-1769
Rigid Connecting Link

016701769
2CHV57304-3001: RNCC: 3 | RNVC: 2

8 Feb 2018

3040-01-670-1558
Rigid Connecting Link

016701558
BACR24N4B157: RNCC: 3 | RNVC: 1

8 Feb 2018

3040-01-670-1314
Nonaircraft Mechanical Actuator

016701314
12012H4104: RNCC: 3 | RNVC: 2

7 Feb 2018

3040-01-670-1316
Nonaircraft Mechanical Actuator

016701316
12012H4103: RNCC: 3 | RNVC: 2

7 Feb 2018

3040-01-670-1259
Rigid Connecting Link

016701259
5040-1W: RNCC: 3 | RNVC: 2

7 Feb 2018

3040-01-670-1163
Rigid Connecting Link

016701163
4953070: RNCC: 3 | RNVC: 2

7 Feb 2018

3040-01-670-0451
Nonaircraft Mechanical Actuator

016700451
12012H4110: RNCC: 3 | RNVC: 2

2 Feb 2018

3040-01-670-0427
Shaft Retaining Plate

016700427
563-7070228-87: RNCC: 3 | RNVC: 2
H696-1604-87: RNCC: 5 | RNVC: 2
563-7070228: RNCC: D | RNVC: 9

2 Feb 2018

3040-01-670-0416
Shaft Retaining Plate

016700416
563-7070228-82: RNCC: 3 | RNVC: 2
H696-1604-82: RNCC: 5 | RNVC: 2
563-7070228: RNCC: D | RNVC: 9

2 Feb 2018

3040-01-669-9941
Shouldered Shaft

016699941
50288-1: RNCC: 3 | RNVC: 2
P51280-1 ITEM 6: RNCC: 5 | RNVC: 1
P51280-1: RNCC: D | RNVC: 9

31 Jan 2018

3040-01-669-9642
Control Cable Assembly

016699642
VT7301G051: RNCC: 3 | RNVC: 2

30 Jan 2018

3040-01-669-9604
Control Cable Assembly

016699604
ZG7283G022: RNCC: 3 | RNVC: 2

30 Jan 2018

3040-01-669-8146
Straight Shaft

016698146
563-7070228-96: RNCC: 3 | RNVC: 2
H696-1604-96: RNCC: 5 | RNVC: 2

23 Jan 2018

3040-01-669-8076
Linear Actuating Cylinder Cap

016698076
563-7070228-56: RNCC: 3 | RNVC: 2
H696-1604-56: RNCC: 5 | RNVC: 2

23 Jan 2018

3040-01-669-8080
Linear Actuating Cylinder Cap

016698080
563-7070228-86: RNCC: 3 | RNVC: 2
H696-1604-86: RNCC: 5 | RNVC: 2

23 Jan 2018

3040-01-669-7542
Manual Control Lever

016697542
000738-176: RNCC: 3 | RNVC: 2

19 Jan 2018

3040-01-669-7490
Manual Control Lever

016697490
2SJJ04060-0001: RNCC: 3 | RNVC: 2

19 Jan 2018

3040-01-669-7483
Shouldered Axle

016697483
2SJJ03620-0001: RNCC: 3 | RNVC: 2

19 Jan 2018

3040-01-669-7461
Straight Shaft

016697461
2SJJ01163-0001: RNCC: 3 | RNVC: 2

19 Jan 2018

3040-01-669-7434
Rigid Connecting Link

016697434
2SJJ00201-0002: RNCC: 3 | RNVC: 2

19 Jan 2018

3040-01-669-7435
Rigid Connecting Link

016697435
2SJJ00199-0002: RNCC: 3 | RNVC: 2

19 Jan 2018

3040-01-669-7433
Rigid Connecting Link

016697433
2SJJ00200-0002: RNCC: 3 | RNVC: 2

19 Jan 2018

3040-01-669-5266
Nonrotating Shaft Eye Bracket

016695266
4316-10: RNCC: 3 | RNVC: 2

10 Jan 2018

3040-01-669-5138
Linear Actuating Cylinder Piston

016695138
5914-9: RNCC: 3 | RNVC: 2

10 Jan 2018

3040-01-669-5123
Linear Actuating Cylinder Piston

016695123
5914-7: RNCC: 3 | RNVC: 2

10 Jan 2018

3040-01-669-5109
Counterbalance Weight

016695109
393514CL8: RNCC: 3 | RNVC: 2

10 Jan 2018

3040-01-669-5000
Counterbalance Weight

016695000
473718CL5: RNCC: 3 | RNVC: 2

9 Jan 2018

3040-01-669-4974
Counterbalance Weight

016694974
473718CL6: RNCC: 3 | RNVC: 2

9 Jan 2018

3040-01-669-3814
Bell Crank

016693814
1330-1170-10: RNCC: 3 | RNVC: 2
1330-1170: RNCC: D | RNVC: 9

9 Jan 2018

3040-01-669-3813
Rigid Connecting Link

016693813
1330-1435-10: RNCC: 3 | RNVC: 2
1330-1435: RNCC: D | RNVC: 9

9 Jan 2018

3040-01-669-3810
Bell Crank

016693810
1330-1170-20: RNCC: 3 | RNVC: 2
1330-1170: RNCC: D | RNVC: 9

9 Jan 2018

3040-01-669-3795
Rigid Connecting Link

016693795
332T4367-20: RNCC: 3 | RNVC: 1

8 Jan 2018

3040-01-669-3782
Shouldered Shaft Assembly

016693782
31242-ZY3-003: RNCC: 3 | RNVC: 9

8 Jan 2018

3040-01-669-3711
Counterbalance Weight

016693711
473718CL7: RNCC: 3 | RNVC: 2

8 Jan 2018

3040-01-669-3685
Counterbalance Weight

016693685
473718CL8: RNCC: 3 | RNVC: 2

8 Jan 2018

3040-01-669-3653
Linear Actuating Cylinder

016693653
5914-010-MCT: RNCC: 3 | RNVC: 2

8 Jan 2018

3040-01-669-3627
Counterbalance Weight

016693627
402003CL5: RNCC: 3 | RNVC: 2

8 Jan 2018

3040-01-669-3599
Counterbalance Weight

016693599
402003CL6: RNCC: 3 | RNVC: 2

8 Jan 2018

3040-01-669-3581
Counterbalance Weight

016693581
402003CL7: RNCC: 3 | RNVC: 2

8 Jan 2018

3040-01-669-3550
Shaft Retaining Plate

016693550
1330-1270-10: RNCC: 3 | RNVC: 2
1330-1270: RNCC: 5 | RNVC: 2

8 Jan 2018

3040-01-669-3427
Rotating Shaft Eye Bracket

016693427
1330-2804-10: RNCC: 3 | RNVC: 2
1330-2804: RNCC: D | RNVC: 9

5 Jan 2018

3040-01-669-3418
Rotating Shaft Eye Bracket

016693418
1330-1804: RNCC: 3 | RNVC: 2
1330-1804-10: RNCC: 3 | RNVC: 2

5 Jan 2018

3040-01-669-3406
Lever Fitting

016693406
MC550002-61: RNCC: 3 | RNVC: 2

5 Jan 2018

3040-01-669-3399
Straight Shaft

016693399
1330-1756-10: RNCC: 3 | RNVC: 2
1330-1756: RNCC: D | RNVC: 9

5 Jan 2018

3040-01-669-3397
Lever Fitting

016693397
MC550002-62: RNCC: 3 | RNVC: 2

5 Jan 2018

3040-01-669-3393
Lever Fitting

016693393
MC550002-73: RNCC: 3 | RNVC: 2

5 Jan 2018

3040-01-669-3389
Nonaircraft Mechanical Actuator

016693389
1330-1460-10: RNCC: 3 | RNVC: 2
1330-1460: RNCC: D | RNVC: 9

5 Jan 2018

3040-01-669-3387
Lever Fitting

016693387
MC550002-72: RNCC: 3 | RNVC: 2

5 Jan 2018

3040-01-669-3385
Remote Control Lever

016693385
1330-1480-10: RNCC: 3 | RNVC: 2
1330-1480: RNCC: D | RNVC: 9

5 Jan 2018

3040-01-669-3382
Lever Fitting

016693382
MC550002-74: RNCC: 3 | RNVC: 2

5 Jan 2018

3040-01-669-3279
Rigid Connecting Link

016693279
MC280006-80: RNCC: 3 | RNVC: 2

5 Jan 2018

3040-01-669-3265
Rigid Connecting Link

016693265
MC280006-140: RNCC: 3 | RNVC: 2

5 Jan 2018

3040-01-669-3220
Rigid Connecting Link

016693220
1330-1585: RNCC: 3 | RNVC: 2
1330-1585-10: RNCC: 3 | RNVC: 2

5 Jan 2018

3040-01-669-3211
Rigid Connecting Link

016693211
1330-2585-10: RNCC: 3 | RNVC: 2
1330-2585: RNCC: D | RNVC: 9

5 Jan 2018

3040-01-669-3135
Hydraulic Accumulator Cylinder

016693135
400/N0296: RNCC: 3 | RNVC: 2
565/60131: RNCC: 5 | RNVC: 9

4 Jan 2018

3040-01-669-2917
Worm Shaft

016692917
00-913102-00101: RNCC: 3 | RNVC: 2
F-43177 REV F PG 19 IT 40: RNCC: D | RNVC: 9

4 Jan 2018

3040-01-669-2805
Hydraulic Accumulator Cylinder

016692805
556/60533: RNCC: 3 | RNVC: 2

3 Jan 2018

3040-01-669-2532
Straight Shaft

016692532
9948.0022: RNCC: 3 | RNVC: 2

2 Jan 2018

3040-01-669-2521
Control Cam

016692521
803AS701-23: RNCC: 3 | RNVC: 2

2 Jan 2018

3040-01-669-2524
Control Cam

016692524
803AS701-24: RNCC: 3 | RNVC: 2

2 Jan 2018

3040-01-669-2455
Shouldered Shaft

016692455
803AS702-23: RNCC: 3 | RNVC: 2

2 Jan 2018

3040-01-669-2399
Rigid Connecting Link

016692399
IM-SSC-1588-474: RNCC: 3 | RNVC: 2
Q17275-01 FN 11: RNCC: 5 | RNVC: 2

2 Jan 2018

3040-01-669-2287
Shouldered Shaft

016692287
803AS701-22: RNCC: 3 | RNVC: 2

29 Dec 2017

3040-01-669-2215
Mechanical Drive Housing

016692215
803AS701-20: RNCC: 3 | RNVC: 2

29 Dec 2017

3040-01-669-2214
Mechanical Drive Housing

016692214
803AS701-19: RNCC: 3 | RNVC: 2

29 Dec 2017

3040-01-669-2178
Shouldered Shaft

016692178
803AS701-18: RNCC: 3 | RNVC: 2

28 Dec 2017

3040-01-669-2151
Adapter

016692151
816/60068: RNCC: 3 | RNVC: 2

28 Dec 2017

3040-01-669-2050
Cam Feather

016692050
803AS702-27: RNCC: 3 | RNVC: 2

28 Dec 2017

3040-01-669-2043
Cam Fuel

016692043
803AS702-26: RNCC: 3 | RNVC: 2

28 Dec 2017

3040-01-669-1989
Mechanically Actuated Spindle

016691989
4498686 PC 12 IAW REF 9 DET 7-C: RNCC: 3 | RNVC: 2
4498686: RNCC: D | RNVC: 9

27 Dec 2017

3040-01-669-1988
Mechanically Actuated Spindle

016691988
4322609 PC 19: RNCC: 3 | RNVC: 2
4322609: RNCC: D | RNVC: 9

27 Dec 2017

3040-01-669-1474
Nonaircraft Mechanical Actuator

016691474
MC210001-44: RNCC: 3 | RNVC: 2

22 Dec 2017

3040-01-669-1391
Linear Actuating Cylinder Assembly

016691391
400/L7911: RNCC: 3 | RNVC: 2
561/60293: RNCC: 5 | RNVC: 9

22 Dec 2017

3040-01-669-1376
Linear Actuating Cylinder Assembly

016691376
400/L7893: RNCC: 3 | RNVC: 2
557/60231: RNCC: 5 | RNVC: 9

22 Dec 2017

3040-01-669-0984
Rigid Connecting Link

016690984
1330-2610-10: RNCC: 3 | RNVC: 2
1330-2610: RNCC: D | RNVC: 9

20 Dec 2017

3040-01-669-0989
Rigid Connecting Link

016690989
1330-2615-10: RNCC: 3 | RNVC: 2
1330-2615: RNCC: D | RNVC: 9

20 Dec 2017

3040-01-669-0851
Straight Shaft

016690851
4244754: RNCC: 1 | RNVC: 2
3922487: RNCC: 3 | RNVC: 2

20 Dec 2017

3040-01-669-0059
Rigid Connecting Link

016690059
74A411710-2005: RNCC: 3 | RNVC: 2
74A411710-2005: RNCC: 5 | RNVC: 2
74A411710-2005: RNCC: 5 | RNVC: 2
74A411710-2005: RNCC: 5 | RNVC: 2
74A411710-2005: RNCC: 5 | RNVC: 2
74A411710-2005: RNCC: 5 | RNVC: 2
74A411710-2005: RNCC: 5 | RNVC: 2

15 Dec 2017

3040-01-669-0056
Rigid Connecting Link

016690056
74A411710-2006: RNCC: 3 | RNVC: 2
74A411710-2006: RNCC: 5 | RNVC: 2
74A411710-2006: RNCC: 5 | RNVC: 2
74A411710-2006: RNCC: 5 | RNVC: 2
74A411710-2006: RNCC: 5 | RNVC: 2
74A411710-2006: RNCC: 5 | RNVC: 2
74A411710-2006: RNCC: 5 | RNVC: 2

15 Dec 2017

3040-01-668-9828
Straight Shaft

016689828
1330-1797: RNCC: 3 | RNVC: 2

15 Dec 2017

3040-01-668-9738
Shouldered Shaft

016689738
14009A0580: RNCC: 3 | RNVC: 2
14009A0580: RNCC: 5 | RNVC: 2

14 Dec 2017

3040-01-668-9446
Linear Actuating Cylinder Piston

016689446
316562B: RNCC: 3 | RNVC: 2
4247006: RNCC: 7 | RNVC: 2

13 Dec 2017

3040-01-668-9320
Shouldered Axle

016689320
13716315: RNCC: 3 | RNVC: 2

13 Dec 2017

3040-01-668-9302
Straight Shaft

016689302
13674742-009: RNCC: 3 | RNVC: 2

13 Dec 2017

3040-01-668-9295
Rigid Connecting Link

016689295
8M0096315: RNCC: 3 | RNVC: 2

13 Dec 2017

3040-01-668-8533
Straight Shaft

016688533
MC210001-28: RNCC: 3 | RNVC: 2

11 Dec 2017

3040-01-668-8308
Shaft Idler

016688308
MC210001-24: RNCC: 3 | RNVC: 2

8 Dec 2017

3040-01-668-8281
Nonaircraft Mechanical Actuator

016688281
MC210001-43: RNCC: 3 | RNVC: 2

8 Dec 2017

3040-01-668-8226
Shouldered Shaft

016688226
06371-10801-102: RNCC: 3 | RNVC: 2

8 Dec 2017

3040-01-668-8203
Top Cam

016688203
MC240001-30: RNCC: 3 | RNVC: 2

8 Dec 2017

3040-01-668-8187
Straight Shaft

016688187
MC210001-95: RNCC: 3 | RNVC: 2

8 Dec 2017

3040-01-668-7703
Nonaircraft Mechanical Actuator

016687703
00-937426: RNCC: 3 | RNVC: 2

6 Dec 2017

3040-01-668-7120
Mechanical Drive Housing

016687120
7653533-1: RNCC: 1 | RNVC: 2
7653533-1: RNCC: 3 | RNVC: 2

5 Dec 2017

3040-01-668-6467
Linear Actuating Cylinder Head

016686467
221318: RNCC: 3 | RNVC: 2
232523: RNCC: D | RNVC: 9

1 Dec 2017

3040-01-668-6305
Control Cam

016686305
50100-ZY3-A11: RNCC: 3 | RNVC: 9

30 Nov 2017

3040-01-668-5700
Nonrotating Shaft Eye Bracket

016685700
3890AS000996-01: RNCC: 3 | RNVC: 2
3890AS000996-01: RNCC: D | RNVC: 9

29 Nov 2017

3040-01-668-5291
Worm Shaft

016685291
60-405-0334-2: RNCC: 3 | RNVC: 2
01-435-0435-4 ITEM 206: RNCC: D | RNVC: 9

28 Nov 2017

3040-01-668-4257
Spur Gearshaft

016684257
41915K3: RNCC: 3 | RNVC: 2

22 Nov 2017

3040-01-668-4217
Worm Wheel Gearshaft

016684217
H1212-2: RNCC: 3 | RNVC: 2
14100 PL REV V FIND NO. 23: RNCC: 5 | RNVC: 1
14100 REV V: RNCC: D | RNVC: 9

22 Nov 2017

3040-01-668-3894
Shouldered Shaft

016683894
120-342-12-322: RNCC: 3 | RNVC: 2
120-342-12-300 REV A ITEM 1.08: RNCC: 5 | RNVC: 1
120-342-12-300 REV A: RNCC: D | RNVC: 9

21 Nov 2017

3040-01-668-3133
Straight Shaft

016683133
S70-43.81: RNCC: 3 | RNVC: 9

17 Nov 2017

3040-01-668-3099
Straight Shaft

016683099
S50-13.50: RNCC: 3 | RNVC: 9

17 Nov 2017

3040-01-668-3051
Hydraulic Cylinder

016683051
633041: RNCC: 3 | RNVC: 2
79500178-0: RNCC: 7 | RNVC: 2

16 Nov 2017

3040-01-668-2758
Straight Shaft Assembly

016682758
S75-6.88: RNCC: 3 | RNVC: 9

16 Nov 2017

3040-01-668-2694
Linear Actuating Cylinder Cap

016682694
3890AS002591-01: RNCC: 3 | RNVC: 2
3890AS002591-01-G01: RNCC: 5 | RNVC: 2
01D2100G01: RNCC: D | RNVC: 9

15 Nov 2017

3040-01-668-2699
Linear Actuating Cylinder Cap

016682699
3890AS002592-01: RNCC: 3 | RNVC: 2
3890AS002592-01-G01: RNCC: 5 | RNVC: 2
01D2095G01: RNCC: D | RNVC: 9

15 Nov 2017

3040-01-668-2432
Hydraulic Control Receiver-Transmitter

016682432
06850-02815-114: RNCC: 3 | RNVC: 2

15 Nov 2017

3040-01-668-2348
Hydraulic Control Assembly

016682348
JS30853: RNCC: 3 | RNVC: 2

14 Nov 2017

3040-01-668-2303
Shouldered Shaft

016682303
HST10YV-5-12: RNCC: 3 | RNVC: 2

14 Nov 2017

3040-01-668-2146
Straight Shaft

016682146
NS-5/8-L/SS/42: RNCC: 3 | RNVC: 2

14 Nov 2017

3040-01-668-2140
Straight Shaft

016682140
NS-3/4-L/SS/60: RNCC: 3 | RNVC: 2

14 Nov 2017

3040-01-668-2121
Rigid Connecting Link

016682121
MC520002-54: RNCC: 3 | RNVC: 2

14 Nov 2017

3040-01-668-2081
Shouldered Shaft

016682081
HST12YW6-7: RNCC: 3 | RNVC: 2
HST12YW6-7: RNCC: 5 | RNVC: 2

14 Nov 2017

3040-01-668-2042
Nonrotating Shaft Eye Bracket

016682042
01D1364H01: RNCC: 3 | RNVC: 2
3890AS001407-01: RNCC: 5 | RNVC: 1

14 Nov 2017

3040-01-668-1986
Shouldered Shaft

016681986
01D1164H01: RNCC: 3 | RNVC: 2
6048M: RNCC: 3 | RNVC: 9
3890AS001397-01: RNCC: 5 | RNVC: 1
6048 M: RNCC: 5 | RNVC: 9
3890AS001397-01: RNCC: 5 | RNVC: 9

13 Nov 2017

3040-01-668-1903
Rigid Connecting Link

016681903
8599577-001: RNCC: 3 | RNVC: 2

13 Nov 2017

3040-01-668-1114
Rigid Connecting Link

016681114
113T1215-13: RNCC: 3 | RNVC: 1

8 Nov 2017

3040-01-668-0800
Shouldered Shaft

016680800
8599576-001: RNCC: 3 | RNVC: 2

8 Nov 2017

3040-01-668-0064
Straight Shaft

016680064
201354-002: RNCC: 3 | RNVC: 2
02317783: RNCC: 5 | RNVC: 2

7 Nov 2017

3040-01-667-9492
Hub Clamp

016679492
P062: RNCC: 3 | RNVC: 2
609-30-00 ITEM 36: RNCC: 5 | RNVC: 1
9421T7: RNCC: 5 | RNVC: 2
609-30-00: RNCC: D | RNVC: 9

6 Nov 2017

3040-01-667-8243
Rigid Connecting Link

016678243
06310-04104-041: RNCC: 3 | RNVC: 2

1 Nov 2017

3040-01-667-8215
Counterbalance Weight

016678215
50N388CL2: RNCC: 3 | RNVC: 1

31 Oct 2017

3040-01-667-8078
Shouldered Shaft

016678078
80085485: RNCC: 3 | RNVC: 2

31 Oct 2017

3040-01-667-8077
Shouldered Shaft

016678077
80085486: RNCC: 3 | RNVC: 2

31 Oct 2017

3040-01-667-8056
Shouldered Shaft

016678056
80085487: RNCC: 3 | RNVC: 2

31 Oct 2017

3040-01-667-7856
Shouldered Shaft

016677856
80085488: RNCC: 3 | RNVC: 2

30 Oct 2017

3040-01-667-7825
Housing Adapter

016677825
0210 9194: RNCC: 3 | RNVC: 9
0210 9194: RNCC: 5 | RNVC: 2

30 Oct 2017

3040-01-667-7802
Shaft Idler

016677802
D2021-4: RNCC: 3 | RNVC: 2
D2021: RNCC: D | RNVC: 9

30 Oct 2017

3040-01-667-7642
Counterbalance Weight

016677642
50N388CL4: RNCC: 3 | RNVC: 1

28 Oct 2017

3040-01-667-7638
Counterbalance Weight

016677638
50N388CL3: RNCC: 3 | RNVC: 1

28 Oct 2017

3040-01-667-7635
Counterbalance Weight

016677635
50N388CL1: RNCC: 3 | RNVC: 1

28 Oct 2017

3040-01-667-7374
Rigid Connecting Link

016677374
125432-101: RNCC: 3 | RNVC: 2

27 Oct 2017

3040-01-667-7190
Rigid Connecting Link

016677190
1812M31P09: RNCC: 3 | RNVC: 2

26 Oct 2017

3040-01-667-7188
Rigid Connecting Link

016677188
1821M31P08: RNCC: 3 | RNVC: 2

26 Oct 2017

3040-01-667-7060
Mechanical Drive Housing

016677060
04286701: RNCC: 3 | RNVC: 9
04286701: RNCC: 5 | RNVC: 2

26 Oct 2017

3040-01-667-7035
Rigid Connecting Link

016677035
06300-10803-103: RNCC: 3 | RNVC: 2

26 Oct 2017

3040-01-667-6749
Rigid Connecting Link

016676749
113T1910-501: RNCC: 3 | RNVC: 1

26 Oct 2017

3040-01-667-6736
Shouldered Shaft

016676736
113T1210-1: RNCC: 3 | RNVC: 1

26 Oct 2017

3040-01-667-6110
Rigid Connecting Link

016676110
2WPH22030-0001: RNCC: 3 | RNVC: 2
2WPH22030-0001: RNCC: 5 | RNVC: 2

24 Oct 2017

3040-01-667-6113
Rigid Connecting Link

016676113
2WPH43157-0004: RNCC: 3 | RNVC: 2
2WPH43157-0004: RNCC: 5 | RNVC: 2

24 Oct 2017

3040-01-667-6089
Rigid Connecting Link

016676089
2FSH73755-0006: RNCC: 3 | RNVC: 2

24 Oct 2017

3040-01-667-6073
Rigid Connecting Link

016676073
2CHE52105-0001: RNCC: 3 | RNVC: 2

24 Oct 2017

3040-01-667-5885
Shouldered Shaft

016675885
113T1210-2: RNCC: 3 | RNVC: 1

23 Oct 2017

3040-01-667-5888
Rigid Connecting Link

016675888
113T1215-14: RNCC: 3 | RNVC: 1

23 Oct 2017

3040-01-667-5167
Shouldered Shaft

016675167
2893143: RNCC: 3 | RNVC: 2

19 Oct 2017

3040-01-667-5063
Shouldered Shaft

016675063
02309834: RNCC: 3 | RNVC: 2

19 Oct 2017

3040-01-667-4951
Rigid Connecting Link

016674951
50H165: RNCC: 3 | RNVC: 1

18 Oct 2017

3040-01-667-4893
Straight Shaft

016674893
3890AS000497-01: RNCC: 3 | RNVC: 2

18 Oct 2017

3040-01-667-4616
Rigid Connecting Link

016674616
50H162: RNCC: 3 | RNVC: 1

18 Oct 2017

3040-01-667-4617
Rigid Connecting Link

016674617
50H164: RNCC: 3 | RNVC: 1

18 Oct 2017

3040-01-667-4615
Rigid Connecting Link

016674615
50R403: RNCC: 3 | RNVC: 1

18 Oct 2017

3040-01-667-4314
Multiple Gears Gearshaft

016674314
P006329: RNCC: 3 | RNVC: 2

17 Oct 2017

3040-01-667-4178
Rigid Connecting Link

016674178
141T6924-7: RNCC: 3 | RNVC: 1

16 Oct 2017

3040-01-667-3804
Remote Control Lever

016673804
06240-ZY6-305: RNCC: 3 | RNVC: 9

13 Oct 2017

3040-01-667-3797
Linear Actuating Cylinder Piston Rod

016673797
56120-ZY9-013: RNCC: 3 | RNVC: 9

13 Oct 2017

3040-01-667-3788
Guide Rod

016673788
56115-ZY9-013: RNCC: 3 | RNVC: 9

13 Oct 2017

3040-01-667-3784
Guide Rod

016673784
56115-ZW1-315: RNCC: 3 | RNVC: 9

13 Oct 2017

3040-01-667-3776
Guide Cam

016673776
14540-RAA-A02: RNCC: 3 | RNVC: 9

13 Oct 2017

3040-01-667-3555
Rigid Connecting Link

016673555
70T328: RNCC: 3 | RNVC: 1

12 Oct 2017

3040-01-667-3445
Shouldered Shaft

016673445
5145T59G03: RNCC: 3 | RNVC: 2
5145T59G03: RNCC: 5 | RNVC: 9

12 Oct 2017

3040-01-667-2996
Straight Shaft

016672996
MC360001-125: RNCC: 3 | RNVC: 2
MC360001: RNCC: D | RNVC: 9

11 Oct 2017

3040-01-667-2932
Shouldered Shaft Assembly

016672932
63P-44150-11-00: RNCC: 3 | RNVC: 2

11 Oct 2017

3040-01-667-2895
Shouldered Shaft

016672895
3890AS004021-01: RNCC: 3 | RNVC: 2

11 Oct 2017

3040-01-667-2866
Nonvehicular Propeller Shaft

016672866
6J9-45611-01-00: RNCC: 3 | RNVC: 2

11 Oct 2017

3040-01-667-2844
Shouldered Shaft

016672844
6G5-45536-01-00: RNCC: 3 | RNVC: 2

11 Oct 2017

3040-01-667-2480
Rigid Connecting Link

016672480
4C63120-101A: RNCC: 3 | RNVC: 2

10 Oct 2017

3040-01-667-1951
Linear Actuating Cylinder Piston Rod

016671951
CG0011DB: RNCC: 3 | RNVC: 2

6 Oct 2017

3040-01-667-1946
Rigid Connecting Link

016671946
MC960003-9: RNCC: 3 | RNVC: 2

6 Oct 2017

3040-01-667-1846
Straight Shaft Assembly

016671846
64P-44150-11-00: RNCC: 3 | RNVC: 2

6 Oct 2017

3040-01-667-1790
Straight Shaft

016671790
MC240002-31: RNCC: 3 | RNVC: 2
MC240002: RNCC: D | RNVC: 9

6 Oct 2017

3040-01-667-1361
Nonaircraft Mechanical Actuator

016671361
MK4090700: RNCC: 3 | RNVC: 2

4 Oct 2017

3040-01-667-1189
Rigid Connecting Link

016671189
63P-41237-00-00: RNCC: 3 | RNVC: 2

4 Oct 2017

3040-01-667-1133
Straight Shaft

016671133
41755290: RNCC: 1 | RNVC: 2
10383: RNCC: 3 | RNVC: 2

4 Oct 2017

3040-01-667-1136
Bevel-Spur Gearshaft

016671136
6EH-45576-00-00: RNCC: 3 | RNVC: 2

4 Oct 2017

3040-01-667-1004
Rigid Connecting Link

016671004
12601475: RNCC: 3 | RNVC: 2
12601475: RNCC: D | RNVC: 9

3 Oct 2017

3040-01-667-0916
Spur Gearshaft

016670916
YB-06265: RNCC: 3 | RNVC: 2

3 Oct 2017

3040-01-667-0622
Shouldered Shaft

016670622
63P-45501-11-00: RNCC: 3 | RNVC: 2

2 Oct 2017

3040-01-667-0567
Flexible Shaft Assembly Casing

016670567
002-000043-000: RNCC: 3 | RNVC: 2

2 Oct 2017

3040-01-667-0560
Pivot Shaft Assembly

016670560
13716317: RNCC: 3 | RNVC: 2

2 Oct 2017

3040-01-667-0186
Inertia Damper

016670186
8599639-001: RNCC: 3 | RNVC: 2

29 Sep 2017

3040-01-667-0157
Linear Actuating Cylinder

016670157
63P-43810-10-00: RNCC: 3 | RNVC: 2

29 Sep 2017

3040-01-666-9935
Pivot Shaft Assembly

016669935
13716318: RNCC: 3 | RNVC: 2

28 Sep 2017

3040-01-666-9623
Shaft Retaining Plate

016669623
34000D1532887: RNCC: 3 | RNVC: 2
34000D1532887: RNCC: 5 | RNVC: 2

27 Sep 2017

3040-01-666-9555
Straight Shaft

016669555
32A0404011: RNCC: 3 | RNVC: 2

27 Sep 2017

3040-01-666-9558
Rigid Connecting Link

016669558
32A1900012: RNCC: 3 | RNVC: 2

27 Sep 2017

3040-01-666-9495
Linear Actuating Cylinder Assembly

016669495
C16-24227: RNCC: 3 | RNVC: 2

27 Sep 2017

3040-01-666-9481
Straight Shaft

016669481
34000D1532894: RNCC: 3 | RNVC: 2

27 Sep 2017

3040-01-666-9266
Remote Control Lever

016669266
17860-ZY6-000: RNCC: 3 | RNVC: 9

27 Sep 2017

3040-01-666-9203
Shouldered Shaft

016669203
3890AS002987-01: RNCC: 3 | RNVC: 2
3890AS002987-01: RNCC: D | RNVC: 9

26 Sep 2017

3040-01-666-9150
Rigid Connecting Link

016669150
MC360001-123: RNCC: 3 | RNVC: 2
MC360001: RNCC: D | RNVC: 9

26 Sep 2017

3040-01-666-8850
Shouldered Shaft

016668850
3890AS002988-01: RNCC: 3 | RNVC: 2
3890AS002988-01: RNCC: D | RNVC: 9

26 Sep 2017

3040-01-666-8787
Body Hub

016668787
008-402-91: RNCC: 3 | RNVC: 9

25 Sep 2017

3040-01-666-8764
Rigid Connecting Link

016668764
MC360001-110: RNCC: 3 | RNVC: 2
MC360001: RNCC: D | RNVC: 9

25 Sep 2017

3040-01-666-8332
Rigid Connecting Link

016668332
12581730: RNCC: 3 | RNVC: 2

22 Sep 2017

3040-01-666-7818
Linear Actuating Cylinder Assembly

016667818
V2-121-470-49: RNCC: 3 | RNVC: 2

20 Sep 2017

3040-01-666-7720
Electrical-Fluid Pressure Connector Assembly

016667720
8212144: RNCC: 3 | RNVC: 2
8212144: RNCC: 5 | RNVC: 2

20 Sep 2017

3040-01-666-6984
Control Cam

016666984
25-11204: RNCC: 3 | RNVC: 2

18 Sep 2017

3040-01-666-6439
Spring Actuator

016666439
MK4090720: RNCC: 3 | RNVC: 2
MK4090700 FIND NO. 3: RNCC: 5 | RNVC: 2

14 Sep 2017

3040-01-666-6417
Rigid Connecting Link

016666417
06070521-2: RNCC: 3 | RNVC: 2

14 Sep 2017

3040-01-666-6318
Bevel Gear And Shaft Assembly

016666318
CYLS000000258: RNCC: 3 | RNVC: 2

14 Sep 2017

3040-01-666-5415
Mechanical Drive Housing

016665415
13 0603: RNCC: 3 | RNVC: 2

12 Sep 2017

3040-01-666-5229
Shaft Collar

016665229
RUD COLLAR-3000: RNCC: 3 | RNVC: 2

11 Sep 2017

3040-01-666-5090
Shaft Idler

016665090
D2022-4: RNCC: 3 | RNVC: 2
D2022: RNCC: D | RNVC: 9

11 Sep 2017

3040-01-666-5082
Rigid Connecting Link

016665082
1257260: RNCC: 3 | RNVC: 2
1257260: RNCC: 5 | RNVC: 9

11 Sep 2017

3040-01-666-5004
Hub Clamp

016665004
600987: RNCC: 3 | RNVC: 2

8 Sep 2017

3040-01-666-4990
Housing Adapter

016664990
4980855-1: RNCC: 3 | RNVC: 2

8 Sep 2017

3040-01-666-4842
Rigid Connecting Link

016664842
06070521-1: RNCC: 3 | RNVC: 2

8 Sep 2017

3040-01-666-4445
Rotary Actuating Cylinder Assembly

016664445
8090201848-1: RNCC: 3 | RNVC: 2

7 Sep 2017

3040-01-666-4448
Rotary Actuating Cylinder Assembly

016664448
8090201912-100: RNCC: 3 | RNVC: 2

7 Sep 2017

3040-01-666-4186
Rigid Connecting Link

016664186
CLKWM20-20-60: RNCC: 3 | RNVC: 2

6 Sep 2017

3040-01-666-4084
Counterbalance Weight

016664084
12542735-002: RNCC: 3 | RNVC: 2
12542735-002: RNCC: 5 | RNVC: 2

6 Sep 2017

3040-01-666-4060
Counterbalance Weight

016664060
12542735-001: RNCC: 3 | RNVC: 2
12542735-001: RNCC: 5 | RNVC: 2

6 Sep 2017

3040-01-666-3812
Control Cam

016663812
12024A3018: RNCC: 3 | RNVC: 2

5 Sep 2017

3040-01-666-3801
Rigid Connecting Link

016663801
583E011-11: RNCC: 3 | RNVC: 2

5 Sep 2017

3040-01-666-3786
Linear Actuating Cylinder Assembly

016663786
13004A2050: RNCC: 1 | RNVC: 2
1304K3: RNCC: 3 | RNVC: 2

5 Sep 2017

3040-01-666-3046
Mechanical Drive Housing

016663046
301411: RNCC: 3 | RNVC: 2
200085 ITEM 3: RNCC: 5 | RNVC: 2

31 Aug 2017

3040-01-666-2941
Straight Shaft

016662941
301429: RNCC: 3 | RNVC: 2
301411 ITEM 4: RNCC: 5 | RNVC: 2

31 Aug 2017

3040-01-666-2757
Mechanically Actuated Spindle

016662757
WK-837-11 PC 6: RNCC: 3 | RNVC: 2

31 Aug 2017

3040-01-666-2364
Rigid Connecting Link

016662364
8M0103285: RNCC: 3 | RNVC: 2

29 Aug 2017

3040-01-666-0888
Nonaircraft Mechanical Actuator

016660888
0212-2017: RNCC: 3 | RNVC: 2

23 Aug 2017

3040-01-666-0624
Hydraulic Control Assembly

016660624
1561-999-000: RNCC: 3 | RNVC: 2
12270PL FIND 4 PN 1561-999-000: RNCC: 5 | RNVC: 2

22 Aug 2017

3040-01-666-0620
Rigid Connecting Link

016660620
3FP3490011-3: RNCC: 3 | RNVC: 2

22 Aug 2017

3040-01-666-0529
Hydraulic Accumulator Cylinder

016660529
ZX11338930: RNCC: 3 | RNVC: 9

22 Aug 2017

3040-01-666-0501
Straight Shaft

016660501
250601: RNCC: 3 | RNVC: 2
EQUIP-MANUAL PG 10 CUT OUT 10: RNCC: D | RNVC: 9

22 Aug 2017

3040-01-666-0447
Hydraulic Accumulator Cylinder

016660447
ZX11339021: RNCC: 3 | RNVC: 9

21 Aug 2017

3040-01-666-0431
Body Hub

016660431
3542: RNCC: 3 | RNVC: 2
CJ28/38XS3: RNCC: 5 | RNVC: 2

21 Aug 2017

3040-01-666-0426
Body Hub

016660426
CJ28/38XS4: RNCC: 3 | RNVC: 2
3543: RNCC: 3 | RNVC: 2

21 Aug 2017

3040-01-666-0251
Rigid Connecting Link

016660251
JSFM64D01: RNCC: 1 | RNVC: 2
JSFM64D01: RNCC: 3 | RNVC: 2
JSFM64D01: RNCC: 3 | RNVC: 2
JSFM64D01: RNCC: 3 | RNVC: 2
JSFM64D01: RNCC: 3 | RNVC: 2
JSFM64: RNCC: D | RNVC: 9

21 Aug 2017

3040-01-666-0238
Rigid Connecting Link

016660238
JSFM23A1: RNCC: 1 | RNVC: 2
JSFM23A1: RNCC: 3 | RNVC: 2
JSFM23A1: RNCC: 3 | RNVC: 2
JSFM23: RNCC: D | RNVC: 9

21 Aug 2017

3040-01-665-9710
Shouldered Shaft

016659710
M10-103: RNCC: 3 | RNVC: 2

18 Aug 2017

3040-01-665-9328
Nonrotating Shaft Eye Bracket

016659328
252103: RNCC: 3 | RNVC: 2
EQUIP-MANUAL PG10 CUT OUT 11: RNCC: D | RNVC: 9

17 Aug 2017

3040-01-665-9321
Hub Clamp

016659321
1641069: RNCC: 3 | RNVC: 2

17 Aug 2017

3040-01-665-8694
Worm Shaft

016658694
301310-5: RNCC: 3 | RNVC: 2
312001 REV A IT. NO. 1: RNCC: 5 | RNVC: 9

16 Aug 2017

3040-01-665-8676
Shouldered Shaft

016658676
810200-2: RNCC: 3 | RNVC: 2
312001 REV A IT. NO. 31: RNCC: 5 | RNVC: 2

16 Aug 2017

3040-01-665-8362
Hub Clamp

016658362
863447-001: RNCC: 3 | RNVC: 2

15 Aug 2017

3040-01-665-7681
Straight Shaft

016657681
883E004-11: RNCC: 3 | RNVC: 2

11 Aug 2017

3040-01-665-7501
Hydraulic Accumulator Cylinder

016657501
EP-0002721: RNCC: 3 | RNVC: 2

10 Aug 2017

3040-01-665-7075
Rigid Connecting Link

016657075
4973986-2: RNCC: 3 | RNVC: 2

9 Aug 2017

3040-01-665-6797
Counterbalance Weight

016656797
4990205-1: RNCC: 3 | RNVC: 2
4990205: RNCC: D | RNVC: 9

8 Aug 2017

3040-01-665-6520
Spur Gearshaft

016656520
8M0094483: RNCC: 3 | RNVC: 2

8 Aug 2017

3040-01-665-6515
Mechanical Drive Housing

016656515
8M0088076: RNCC: 3 | RNVC: 2

8 Aug 2017

3040-01-665-6206
Rigid Connecting Link

016656206
1051B-01-14: RNCC: 3 | RNVC: 2

7 Aug 2017

3040-01-665-5745
Piston Ring

016655745
12052506-01: RNCC: 3 | RNVC: 2
12052304 ITEM 8: RNCC: C | RNVC: 1
12052304: RNCC: D | RNVC: 9

4 Aug 2017

3040-01-665-5578
Linear Actuating Cylinder Assembly

016655578
EP-0002720: RNCC: 3 | RNVC: 2

4 Aug 2017

3040-01-665-5068
Shaft-Hub Clamp-Bushing Assembly

016655068
8599135 ITEM 15: RNCC: 3 | RNVC: 1
AS568-017: RNCC: 5 | RNVC: 1
8599135 ITEM 15D7: RNCC: 5 | RNVC: 2
AS568-017D7: RNCC: 5 | RNVC: 2
AS568-017: RNCC: 5 | RNVC: 9

2 Aug 2017

3040-01-665-4931
Mechanical Drive Housing Part

016654931
6639780-1: RNCC: 3 | RNVC: 2

1 Aug 2017

3040-01-665-4858
Mechanical Drive Housing Part

016654858
3263312-1: RNCC: 3 | RNVC: 2
4974206-5: RNCC: C | RNVC: 1
3263312: RNCC: D | RNVC: 9

1 Aug 2017

3040-01-665-4608
Mechanical Drive Housing Part

016654608
4980855-2: RNCC: 3 | RNVC: 2

31 Jul 2017

3040-01-665-4589
Mechanical Drive Housing Part

016654589
6640220-1: RNCC: 3 | RNVC: 2

31 Jul 2017

3040-01-665-4573
Worm Shaft

016654573
123-4403562 PARTS 6, 25, 26: RNCC: 3 | RNVC: 1
123-4403564 PARTS 1, 2, 3: RNCC: 5 | RNVC: 1
123-4403564 PARTS 1, 2, 3L1: RNCC: 5 | RNVC: 2
123-4403562 PARTS 6, 25, 26L1: RNCC: 5 | RNVC: 2

31 Jul 2017

3040-01-665-4195
Shouldered Shaft

016654195
68W-45611-00-00: RNCC: 3 | RNVC: 2

28 Jul 2017

3040-01-665-3864
Ball Joint

016653864
125663: RNCC: 3 | RNVC: 9
MIL125663: RNCC: 5 | RNVC: 2

27 Jul 2017

3040-01-665-2063
Mechanical Drive Housing

016652063
609-16-00: RNCC: 3 | RNVC: 2
609-10-00 ITEM 12: RNCC: C | RNVC: 1
609-10-00: RNCC: D | RNVC: 9

24 Jul 2017

3040-01-665-1851
Ballscrew Assembly

016651851
210142: RNCC: 3 | RNVC: 2
G106001079-1: RNCC: 5 | RNVC: 2

21 Jul 2017

3040-01-665-1564
Mechanical Drive Housing Part

016651564
7653531: RNCC: 1 | RNVC: 2
7653531-1: RNCC: 3 | RNVC: 2

20 Jul 2017

3040-01-665-1024
Shouldered Shaft

016651024
SJY-1112A: RNCC: 3 | RNVC: 2

19 Jul 2017

3040-01-665-0971
Piston Ring

016650971
204.62866: RNCC: 3 | RNVC: 9

19 Jul 2017

3040-01-665-0963
Piston Ring

016650963
233.63604: RNCC: 3 | RNVC: 9

19 Jul 2017

3040-01-665-0670
Shouldered Shaft

016650670
3890AS000171-01: RNCC: 3 | RNVC: 2

18 Jul 2017

3040-01-665-0438
Flexible Drive Shaft

016650438
114G1025-3: RNCC: 3 | RNVC: 2

17 Jul 2017

3040-01-665-0126
Linear Actuating Cylinder Piston

016650126
153150: RNCC: 3 | RNVC: 2

14 Jul 2017

3040-01-664-9455
Shaft Collar

016649455
CCLX 120: RNCC: 3 | RNVC: 2

12 Jul 2017

3040-01-664-9122
Rigid Connecting Link

016649122
STF-12: RNCC: 3 | RNVC: 2

11 Jul 2017

3040-01-664-9044
Straight Shaft

016649044
120316330: RNCC: 3 | RNVC: 9
4298471: RNCC: 7 | RNVC: 2

11 Jul 2017

3040-01-664-7167
Nonaircraft Mechanical Actuator

016647167
160-500331: RNCC: 1 | RNVC: 2
160-500331-G001: RNCC: 3 | RNVC: 2
CB93499-001: RNCC: 3 | RNVC: 9

2 Jul 2017

3040-01-664-6455
Breather

016646455
BFP7G10K1: RNCC: 3 | RNVC: 2

28 Jun 2017

3040-01-664-6395
Shouldered Shaft

016646395
8M0083568: RNCC: 3 | RNVC: 2

28 Jun 2017

3040-01-664-4995
Control Cam

016644995
50552-2: RNCC: 3 | RNVC: 2

21 Jun 2017

3040-01-664-4558
Rigid Connecting Link

016644558
167-7563785 PC NO 74: RNCC: 3 | RNVC: 2

20 Jun 2017

3040-01-664-4350
Rigid Connecting Link

016644350
167-7563785 PC NO 66: RNCC: 3 | RNVC: 2

20 Jun 2017

3040-01-664-4168
Nonaircraft Mechanical Actuator

016644168
15662267-1: RNCC: 3 | RNVC: 2

19 Jun 2017

3040-01-664-3333
Rigid Connecting Link

016643333
8M0075924: RNCC: 3 | RNVC: 2

15 Jun 2017

3040-01-664-3318
Straight Shaft

016643318
7709161: RNCC: 3 | RNVC: 2

15 Jun 2017

3040-01-664-3133
Rigid Connecting Link

016643133
167-7563786 PC NO 52: RNCC: 3 | RNVC: 2

14 Jun 2017

3040-01-664-2937
Grease Cap

016642937
7383858-H5471905-P50415 ITEM 6: RNCC: 3 | RNVC: 1
040290-006: RNCC: 5 | RNVC: 1
P50415 ITEM 6: RNCC: 5 | RNVC: 1
040290-006D4: RNCC: 5 | RNVC: 1
P50415 ITEM 6D4: RNCC: 5 | RNVC: 1
H547-0001-H5471905-P50415ITEM6: RNCC: 5 | RNVC: 2
7383858-H5471905-P50415 ITEM 6D4: RNCC: 5 | RNVC: 2
H547-0001-H5471905-P50415ITEM6D4: RNCC: 5 | RNVC: 2

14 Jun 2017

3040-01-664-2397
Ballscrew Assembly

016642397
167-7108111-057: RNCC: 3 | RNVC: 1
7383858-H5471727-057D4: RNCC: 5 | RNVC: 2
H547-1721-057D4: RNCC: 5 | RNVC: 2
7832975D4: RNCC: 5 | RNVC: 2
7832975: RNCC: 5 | RNVC: 2
ERH547-1901A82 IT-1: RNCC: 5 | RNVC: 2
H547-1721-057: RNCC: 5 | RNVC: 2
167-7108111-057D4: RNCC: 5 | RNVC: 2
ERH547-1901A82 IT-1D4: RNCC: 5 | RNVC: 2
7383858-H5471727-057: RNCC: 5 | RNVC: 2

12 Jun 2017

3040-01-664-2385
Remote Control Lever

016642385
6L6-44150-02-00: RNCC: 3 | RNVC: 2

12 Jun 2017

3040-01-664-2323
Rigid Connecting Link

016642323
8M0033992: RNCC: 3 | RNVC: 2

12 Jun 2017

3040-01-664-2313
Counterbalance Weight

016642313
8M0057670: RNCC: 3 | RNVC: 2

12 Jun 2017

3040-01-664-2111
Brake Disc

016642111
231-2252: RNCC: 3 | RNVC: 2
103167: RNCC: 5 | RNVC: 2
231-2252: RNCC: 5 | RNVC: 9

9 Jun 2017

3040-01-664-1484
Housing Adapter

016641484
HD7500-RFC: RNCC: 3 | RNVC: 2

7 Jun 2017

3040-01-664-0604
Linear Actuating Cylinder Piston

016640604
388-2310: RNCC: 3 | RNVC: 2

5 Jun 2017

3040-01-664-0564
Linear Actuating Cylinder Cap

016640564
207-8572: RNCC: 3 | RNVC: 2

5 Jun 2017

3040-01-663-9821
Straight Shaft

016639821
82087-17: RNCC: 3 | RNVC: 1

31 May 2017

3040-01-663-9083
Pawl

016639083
86399-31: RNCC: 3 | RNVC: 1

27 May 2017

3040-01-663-9084
Pawl

016639084
86399-32: RNCC: 3 | RNVC: 1

27 May 2017

3040-01-663-9080
Straight Shaft

016639080
82087-16: RNCC: 3 | RNVC: 1

27 May 2017

3040-01-663-8549
Straight Shaft

016638549
0136-98-1325-01: RNCC: 3 | RNVC: 2

25 May 2017

3040-01-663-8507
Straight Shaft

016638507
4105021018-1: RNCC: 3 | RNVC: 2

25 May 2017

3040-01-663-8099
Mechanical Drive Housing

016638099
13705977-9: RNCC: 3 | RNVC: 2

24 May 2017

3040-01-663-7652
Remote Control Lever

016637652
125416020: RNCC: 3 | RNVC: 9
4298485: RNCC: 7 | RNVC: 2

23 May 2017

3040-01-663-7476
Pawl

016637476
86398-31: RNCC: 3 | RNVC: 1

20 May 2017

3040-01-663-7164
Pawl

016637164
86398-30: RNCC: 3 | RNVC: 1

18 May 2017

3040-01-663-7167
Pawl

016637167
86399-30: RNCC: 3 | RNVC: 1

18 May 2017

3040-01-663-7165
Pawl

016637165
86398-32: RNCC: 3 | RNVC: 1

18 May 2017

3040-01-663-6204
Straight Shaft

016636204
4990545-1: RNCC: 3 | RNVC: 2

16 May 2017

3040-01-663-5242
Straight Shaft

016635242
103-20117-21: RNCC: 3 | RNVC: 9
103-20117-21: RNCC: 5 | RNVC: 2

12 May 2017

3040-01-663-4768
Remote Control Lever

016634768
4232587: RNCC: 1 | RNVC: 2
721508: RNCC: 3 | RNVC: 2

11 May 2017

3040-01-663-4694
Push-Pull Control Assembly

016634694
174T3302-1: RNCC: 3 | RNVC: 1

10 May 2017

3040-01-663-4437
Rigid Connecting Link

016634437
13060451: RNCC: 3 | RNVC: 2

10 May 2017

3040-01-663-4331
Straight Shaft

016634331
0231702-001: RNCC: 3 | RNVC: 2

9 May 2017

3040-01-663-4270
Rigid Connecting Link

016634270
13060452: RNCC: 3 | RNVC: 2

9 May 2017

3040-01-663-4090
Push-Pull Control Assembly

016634090
302-8540946 ITEM 17: RNCC: 3 | RNVC: 1
302-8540945 ITEM 05: RNCC: 5 | RNVC: 1
K-HNG3600: RNCC: 5 | RNVC: 2
302-8540945 ITEM 05D4: RNCC: 5 | RNVC: 2
302-8540946 ITEM 17D4: RNCC: 5 | RNVC: 2
K-HNG3600D4: RNCC: 5 | RNVC: 2

9 May 2017

3040-01-663-3941
Remote Control Lever

016633941
125176080: RNCC: 3 | RNVC: 9
4298483: RNCC: 7 | RNVC: 2

8 May 2017

3040-01-663-3933
Remote Control Lever

016633933
125046240: RNCC: 3 | RNVC: 9
4298479: RNCC: 7 | RNVC: 2

8 May 2017

3040-01-663-3888
Remote Control Lever

016633888
125156170: RNCC: 3 | RNVC: 9
4298481: RNCC: 7 | RNVC: 2

8 May 2017

3040-01-663-3832
Shouldered Shaft

016633832
5543257: RNCC: 3 | RNVC: 2

8 May 2017

3040-01-663-3294
Remote Control Lever

016633294
4214717: RNCC: 1 | RNVC: 2
36766000: RNCC: 3 | RNVC: 2

5 May 2017

3040-01-663-2912
Housing Adapter

016632912
15552-1: RNCC: 3 | RNVC: 2

4 May 2017

3040-01-663-2898
Headed Straight Pin

016632898
13060450: RNCC: 3 | RNVC: 2

4 May 2017

3040-01-663-2724
Mechanical Drive Housing

016632724
5190343: RNCC: 3 | RNVC: 2

3 May 2017

3040-01-663-2336
Push-Pull Control Assembly

016632336
302-8540946 ITEM 16: RNCC: 3 | RNVC: 1
302-8540945 ITEM 04: RNCC: 5 | RNVC: 1
C-1SD/K-NC1004: RNCC: 5 | RNVC: 2
302-8540945 ITEM 04D4: RNCC: 5 | RNVC: 2
302-8540946 ITEMD4: RNCC: 5 | RNVC: 2
C-1SD/K-NC1004D4: RNCC: 5 | RNVC: 2

2 May 2017

3040-01-663-2285
Straight Shaft

016632285
17A4526P05: RNCC: 3 | RNVC: 2

2 May 2017

3040-01-663-2276
Straight Shaft

016632276
17A4526P27: RNCC: 3 | RNVC: 2

2 May 2017

3040-01-663-1638
Mechanical Drive Housing

016631638
6631687-1: RNCC: 3 | RNVC: 2

28 Apr 2017

3040-01-663-1611
Mechanical Drive Housing

016631611
6631687-2: RNCC: 3 | RNVC: 2

28 Apr 2017

3040-01-663-1606
Mechanical Drive Housing

016631606
6631667-1: RNCC: 3 | RNVC: 2

28 Apr 2017

3040-01-663-1596
Mechanical Drive Housing

016631596
6631590-1: RNCC: 3 | RNVC: 2

28 Apr 2017

3040-01-663-1550
Mechanical Drive Housing

016631550
4984435-1: RNCC: 3 | RNVC: 2

27 Apr 2017

3040-01-663-1543
Mechanical Drive Housing

016631543
6631587-3: RNCC: 3 | RNVC: 2

27 Apr 2017

3040-01-663-1304
Straight Shaft Assembly

016631304
81094-3S: RNCC: 3 | RNVC: 2
4260758: RNCC: 7 | RNVC: 2

27 Apr 2017

3040-01-663-1154
Straight Axle

016631154
3449AS724-1: RNCC: 3 | RNVC: 2

27 Apr 2017

3040-01-663-1003
Rigid Connecting Link

016631003
803-6397269 ASSY H-1: RNCC: 3 | RNVC: 1
803-6397268 PC 184: RNCC: 3 | RNVC: 1

26 Apr 2017

3040-01-663-0994
Control Cam

016630994
1252-046A: RNCC: 3 | RNVC: 2

26 Apr 2017

3040-01-663-0929
Rigid Connecting Link

016630929
803-6397268 PC 182: RNCC: 3 | RNVC: 1
803-6397269 ASSY F-1: RNCC: 3 | RNVC: 1

26 Apr 2017

3040-01-663-0891
Linear Actuating Cylinder Assembly

016630891
4244770: RNCC: 1 | RNVC: 2
3968196: RNCC: 3 | RNVC: 2

26 Apr 2017

3040-01-662-9213
Counterbalance Weight

016629213
PWA 101024-3: RNCC: 3 | RNVC: 2

21 Apr 2017

3040-01-662-9209
Counterbalance Weight

016629209
PWA 101024-2: RNCC: 3 | RNVC: 2

21 Apr 2017

3040-01-662-9204
Counterbalance Weight

016629204
PWA 101024-1: RNCC: 3 | RNVC: 2

21 Apr 2017

3040-01-662-8099
Nonaircraft Mechanical Actuator

016628099
570 891 338: RNCC: 3 | RNVC: 2

20 Apr 2017

3040-01-662-7898
Linear Actuating Cylinder Assembly

016627898
A32032-59: RNCC: 3 | RNVC: 2

19 Apr 2017

3040-01-662-7645
Mechanical Drive Housing Part

016627645
6631653-1: RNCC: 3 | RNVC: 2
6631652: RNCC: D | RNVC: 9

19 Apr 2017

3040-01-662-7610
Mechanical Drive Housing Part

016627610
6631758-1: RNCC: 3 | RNVC: 2
6631652: RNCC: D | RNVC: 9

19 Apr 2017

3040-01-662-7608
Mechanical Drive Housing Part

016627608
6631653-2: RNCC: 3 | RNVC: 2
6631652: RNCC: D | RNVC: 9

19 Apr 2017

3040-01-662-6247
Shouldered Shaft

016626247
6E5-45634-02-00: RNCC: 3 | RNVC: 2

13 Apr 2017

3040-01-662-6190
Straight Shaft

016626190
6EK-41635-00-00: RNCC: 3 | RNVC: 2

13 Apr 2017

3040-01-662-6182
Shouldered Shaft Assembly

016626182
6E5-44150-03-00: RNCC: 3 | RNVC: 2

13 Apr 2017

3040-01-662-5942
Rigid Connecting Link

016625942
6631848-1: RNCC: 3 | RNVC: 2
6631848: RNCC: D | RNVC: 9

12 Apr 2017

3040-01-662-5913
Mechanical Drive Housing

016625913
167-7384259-A1: RNCC: 3 | RNVC: 2
H547-1906-A1: RNCC: 5 | RNVC: 2

12 Apr 2017

3040-01-662-5871
Shaft Collar

016625871
6CB-11478-00-00: RNCC: 3 | RNVC: 2

12 Apr 2017

3040-01-662-5902
Breather

016625902
2X3611AR00: RNCC: 3 | RNVC: 2

12 Apr 2017

3040-01-662-5889
Shouldered Shaft

016625889
6EK-45501-00-00: RNCC: 3 | RNVC: 2

12 Apr 2017

3040-01-662-5840
Shouldered Shaft

016625840
4260771: RNCC: 1 | RNVC: 2
83303: RNCC: 3 | RNVC: 2

12 Apr 2017

3040-01-662-5862
Shouldered Shaft

016625862
3634235: RNCC: 1 | RNVC: 2
18212626K: RNCC: 3 | RNVC: 2

12 Apr 2017

3040-01-662-5526
Manual Control Lever Assembly

016625526
251T1539-7: RNCC: 3 | RNVC: 1

11 Apr 2017

3040-01-662-5523
Rigid Connecting Link

016625523
332T4362-2: RNCC: 3 | RNVC: 1

11 Apr 2017

3040-01-662-5207
Grease Cap

016625207
T6-3001-60031: RNCC: 3 | RNVC: 2

10 Apr 2017

3040-01-662-3999
Shouldered Shaft

016623999
6E5-45611-01-00: RNCC: 3 | RNVC: 2

5 Apr 2017

3040-01-662-3915
Mechanical Drive Housing

016623915
01925735: RNCC: 3 | RNVC: 2

5 Apr 2017

3040-01-662-3908
Spur Gearshaft

016623908
6640217-1: RNCC: 3 | RNVC: 2

5 Apr 2017

3040-01-662-3541
Ballscrew Assembly

016623541
167-7384259-2: RNCC: 3 | RNVC: 2
H547-1906-2: RNCC: 5 | RNVC: 2
7833110: RNCC: 5 | RNVC: 2

4 Apr 2017

3040-01-662-3282
Shouldered Shaft

016623282
56689: RNCC: 3 | RNVC: 2

3 Apr 2017

3040-01-662-3005
Drive Hub Assembly

016623005
304630: RNCC: 3 | RNVC: 2

3 Apr 2017

3040-01-662-1891
Linear Actuating Cylinder Cap

016621891
LS1004409: RNCC: 3 | RNVC: 2

29 Mar 2017

3040-01-662-1782
Rigid Connecting Link

016621782
3958AS989-2: RNCC: 3 | RNVC: 2

29 Mar 2017

3040-01-662-1641
Rigid Connecting Link

016621641
332U2323-18: RNCC: 3 | RNVC: 1

28 Mar 2017

3040-01-662-1588
Linear Actuating Cylinder Assembly

016621588
356-2219: RNCC: 3 | RNVC: 2

28 Mar 2017

3040-01-662-1430
Extension Shaft

016621430
LS1014176: RNCC: 3 | RNVC: 2

28 Mar 2017

3040-01-662-1381
Straight Shaft

016621381
65455001: RNCC: 3 | RNVC: 2
4232468: RNCC: 7 | RNVC: 2

28 Mar 2017

3040-01-662-1374
Shouldered Shaft

016621374
121868A: RNCC: 3 | RNVC: 2

28 Mar 2017

3040-01-662-1295
Shouldered Shaft

016621295
LS1040916: RNCC: 3 | RNVC: 2

28 Mar 2017

3040-01-662-1228
Rigid Connecting Link

016621228
251T0100-171: RNCC: 3 | RNVC: 1

27 Mar 2017

3040-01-662-0859
Shouldered Shaft

016620859
LS1040924: RNCC: 3 | RNVC: 2

27 Mar 2017

3040-01-662-0731
Rigid Connecting Link

016620731
252T3114-10: RNCC: 3 | RNVC: 1

25 Mar 2017

3040-01-662-0733
Rigid Connecting Link

016620733
251T0100-247: RNCC: 3 | RNVC: 1

25 Mar 2017

3040-01-662-0435
Linear Actuating Cylinder Piston

016620435
8M0089942: RNCC: 3 | RNVC: 2

24 Mar 2017

3040-01-662-0437
Linear Actuating Cylinder Cap

016620437
21C8024P26: RNCC: 3 | RNVC: 2
21C8024: RNCC: D | RNVC: 9

24 Mar 2017

3040-01-662-0397
Spline Adapter

016620397
B28009-10: RNCC: 3 | RNVC: 2

24 Mar 2017

3040-01-662-0381
Rotating Shaft Eye Bracket

016620381
B28009-11: RNCC: 3 | RNVC: 2

24 Mar 2017

3040-01-662-0374
Rigid Connecting Link

016620374
113T1910-72: RNCC: 3 | RNVC: 1

24 Mar 2017

3040-01-662-0371
Rigid Connecting Link

016620371
140T2910-3: RNCC: 3 | RNVC: 1

24 Mar 2017

3040-01-662-0288
Linear Actuating Cylinder Cap

016620288
12542268: RNCC: 3 | RNVC: 2

23 Mar 2017

3040-01-662-0197
Linear Actuating Cylinder

016620197
204185B: RNCC: 3 | RNVC: 2
4247005: RNCC: 7 | RNVC: 2

23 Mar 2017

3040-01-662-0125
Straight Shaft

016620125
9914.0250-9: RNCC: 3 | RNVC: 2
4132908 ITEM NO 55B: RNCC: D | RNVC: 9

23 Mar 2017

3040-01-662-0123
Shouldered Shaft

016620123
4260793: RNCC: 1 | RNVC: 2
83301: RNCC: 3 | RNVC: 2

23 Mar 2017

3040-01-662-0058
Linear Actuating Cylinder Head

016620058
8M0098628: RNCC: 3 | RNVC: 2

23 Mar 2017

3040-01-661-9955
Straight Shaft Assembly

016619955
125329BB-71: RNCC: 3 | RNVC: 1

22 Mar 2017

3040-01-661-9891
Straight Shaft

016619891
12577820: RNCC: 3 | RNVC: 2

22 Mar 2017

3040-01-661-9798
Straight Shaft

016619798
4232445: RNCC: 1 | RNVC: 2
36764000: RNCC: 3 | RNVC: 2

22 Mar 2017

3040-01-661-9812
Straight Shaft

016619812
4250792: RNCC: 1 | RNVC: 2
506852PS: RNCC: 3 | RNVC: 2

22 Mar 2017

3040-01-661-9597
Manual Control Lever

016619597
B28009-5: RNCC: 3 | RNVC: 2

21 Mar 2017

3040-01-661-9556
Mechanical Drive Housing Part

016619556
12577832: RNCC: 3 | RNVC: 2

21 Mar 2017

3040-01-661-9336
Clevis Hoist

016619336
21C8024P30: RNCC: 3 | RNVC: 2

21 Mar 2017

3040-01-661-9222
Rigid Connecting Link

016619222
113T1202-1: RNCC: 3 | RNVC: 1

20 Mar 2017

Load More Results