What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 160 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 160 of 300

3040-01-693-9193
Shouldered Shaft Assembly

016939193
S14-24570-0: RNCC: 3 | RNVC: 2

10 Mar 2021

3040-01-693-7901
Spline Adapter

016937901
AKS4T-1032-130: RNCC: 3 | RNVC: 2

5 Mar 2021

3040-01-693-6977
Shaft Collar

016936977
8628296-2: RNCC: 3 | RNVC: 2
8628296: RNCC: D | RNVC: 9

1 Mar 2021

3040-01-693-6842
Shaft Collar

016936842
8628296-1: RNCC: 3 | RNVC: 2
8628296: RNCC: D | RNVC: 9

26 Feb 2021

3040-01-693-6565
Fuel Rod Control

016936565
16609039: RNCC: 3 | RNVC: 2
S9312-AH-MMA-020-FIG-7-63: RNCC: 5 | RNVC: 1

25 Feb 2021

3040-01-693-6280
Rigid Connecting Link

016936280
42-0727: RNCC: 3 | RNVC: 2
42-0727: RNCC: 5 | RNVC: 2

24 Feb 2021

3040-01-693-6192
Shouldered Shaft

016936192
05-1DA-8M3VGF-30J ITEM 3: RNCC: 3 | RNVC: 2
05-1DA-8M3VGF-30J ITEM 3: RNCC: 5 | RNVC: 2

24 Feb 2021

3040-01-693-5703
Straight Shaft

016935703
SH901-020-539-105: RNCC: 3 | RNVC: 2

22 Feb 2021

3040-01-693-4982
Linear Actuating Cylinder Assembly

016934982
1375372: RNCC: 3 | RNVC: 2

17 Feb 2021

3040-01-693-4673
Gearbox Parts Kit

016934673
5400-6-999-000: RNCC: 3 | RNVC: 2
0511PL REVAH FN30 5400-6-999-000: RNCC: 5 | RNVC: 2

12 Feb 2021

3040-01-693-4666
Mechanical Drive Housing

016934666
4600-025-009: RNCC: 3 | RNVC: 2
0511PL REV AH FN2 4600-025-009: RNCC: 5 | RNVC: 2

12 Feb 2021

3040-01-693-4386
Mechanically Actuated Spindle

016934386
6964637: RNCC: 3 | RNVC: 2

11 Feb 2021

3040-01-693-4325
Manual Control Lever

016934325
5827-999-000: RNCC: 3 | RNVC: 2
0511PL REV AH FN 54: RNCC: 5 | RNVC: 2

11 Feb 2021

3040-01-693-3845
Shouldered Shaft

016933845
8628280-2: RNCC: 3 | RNVC: 2
8628280: RNCC: D | RNVC: 9

9 Feb 2021

3040-01-693-3445
Hydraulic Accumulator Bladder

016933445
HAB4-207-4X/90U08G-6N111-ASME: RNCC: 3 | RNVC: 2
258064: RNCC: 5 | RNVC: 2

5 Feb 2021

3040-01-693-3265
Control Cam

016933265
860049-010: RNCC: 3 | RNVC: 2
860049-010: RNCC: D | RNVC: 9

4 Feb 2021

3040-01-693-2839
Shouldered Shaft

016932839
81001625: RNCC: 3 | RNVC: 2
81001625: RNCC: 5 | RNVC: 2

2 Feb 2021

3040-01-693-2266
Nonaircraft Mechanical Actuator

016932266
NMB24-SR: RNCC: 3 | RNVC: 2

29 Jan 2021

3040-01-693-1842
Rigid Connecting Link

016931842
PAAI062956: RNCC: 3 | RNVC: 2
DAAK018635 REV - SEQ 140: RNCC: C | RNVC: 1
DAAK018635: RNCC: D | RNVC: 9

28 Jan 2021

3040-01-693-1774
Brake Backing Plate

016931774
860120-010: RNCC: 3 | RNVC: 2
860120-010: RNCC: D | RNVC: 9

28 Jan 2021

3040-01-693-1432
Shaft Retaining Plate

016931432
PAAI062935: RNCC: 3 | RNVC: 2
DAAK018635 REV - SEQ 142: RNCC: C | RNVC: 1
DAAK018635: RNCC: D | RNVC: 9

27 Jan 2021

3040-01-693-1420
Shaft Retaining Plate

016931420
J000002277: RNCC: 3 | RNVC: 2
DAAK018635 REV - SEQ 150: RNCC: C | RNVC: 1
DAAK018635: RNCC: D | RNVC: 9

27 Jan 2021

3040-01-693-1413
Shaft Retaining Plate

016931413
PAAI062936/A: RNCC: 3 | RNVC: 2
PAAI062936: RNCC: 5 | RNVC: 9
DAAK018635 REV - SEQ 144: RNCC: C | RNVC: 1
DAAK018635: RNCC: D | RNVC: 9

27 Jan 2021

3040-01-692-9718
Spur Gearshaft

016929718
08001687: RNCC: 3 | RNVC: 2
PL-08001666-1 FIND NO.4: RNCC: 5 | RNVC: 2

21 Jan 2021

3040-01-692-9285
Shouldered Shaft Assembly

016929285
8592283-009: RNCC: 3 | RNVC: 2
311-8592283: RNCC: D | RNVC: 9

20 Jan 2021

3040-01-692-9222
Flexible Drive Shaft

016929222
214124-01: RNCC: 3 | RNVC: 2
214124-00: RNCC: D | RNVC: 9

19 Jan 2021

3040-01-692-9196
Shaft Idler

016929196
8592283-101: RNCC: 3 | RNVC: 2
8592283-101: RNCC: 3 | RNVC: 9
311-8592283: RNCC: D | RNVC: 9

19 Jan 2021

3040-01-692-9148
Control Cam

016929148
197K3591-100: RNCC: 3 | RNVC: 2

19 Jan 2021

3040-01-692-9150
Control Cam

016929150
197K3592-100: RNCC: 3 | RNVC: 2

19 Jan 2021

3040-01-692-9138
Straight Shaft

016929138
197K3811-01: RNCC: 3 | RNVC: 2

19 Jan 2021

3040-01-692-8820
Control Cam

016928820
201128060-10: RNCC: 3 | RNVC: 2

14 Jan 2021

3040-01-692-8347
Counterbalance Weight

016928347
206-011-157-105: RNCC: 3 | RNVC: 2

13 Jan 2021

3040-01-692-8343
Counterbalance Weight

016928343
206-011-157-101: RNCC: 3 | RNVC: 2

13 Jan 2021

3040-01-692-8168
Multiple Gears Gearshaft

016928168
8592275-102: RNCC: 3 | RNVC: 2
311-8592275: RNCC: D | RNVC: 9

13 Jan 2021

3040-01-692-7369
Multiple Gears Gearshaft

016927369
167-7108111-PN-53: RNCC: 3 | RNVC: 2
H547-1721-PN-53: RNCC: 5 | RNVC: 2

8 Jan 2021

3040-01-692-6177
Nonaircraft Mechanical Actuator

016926177
26619-001: RNCC: 3 | RNVC: 2
26619-001: RNCC: D | RNVC: 9

29 Dec 2020

3040-01-692-5962
Manual Control Lever

016925962
12628397: RNCC: 3 | RNVC: 2

28 Dec 2020

3040-01-692-4746
Compensator Unit

016924746
100917: RNCC: 3 | RNVC: 2

16 Dec 2020

3040-01-692-4587
Ball Joint

016924587
60645K611: RNCC: 3 | RNVC: 2
007-000019-000: RNCC: 5 | RNVC: 2
007-000019: RNCC: D | RNVC: 9

15 Dec 2020

3040-01-692-4403
Lever Fitting

016924403
BS2025-B: RNCC: 3 | RNVC: 2

15 Dec 2020

3040-01-692-4349
Mechanical Drive Housing

016924349
12628367: RNCC: 3 | RNVC: 2

14 Dec 2020

3040-01-692-4280
Mechanical Drive Housing

016924280
12628362: RNCC: 3 | RNVC: 2

14 Dec 2020

3040-01-692-3459
Nonrotating Shaft Eye Bracket

016923459
4400137-1: RNCC: 3 | RNVC: 2

8 Dec 2020

3040-01-692-3389
Shouldered Shaft

016923389
5614-6-151-000: RNCC: 3 | RNVC: 2
E0500 REV N ITEM NO 9: RNCC: D | RNVC: 9

8 Dec 2020

3040-01-692-3089
Shaft Retaining Plate

016923089
4N-4377: RNCC: 3 | RNVC: 2
4N-4377: RNCC: 5 | RNVC: 9

4 Dec 2020

3040-01-692-3077
Shaft Retaining Plate

016923077
4W-7544: RNCC: 3 | RNVC: 2
4W-7544: RNCC: 5 | RNVC: 9

4 Dec 2020

3040-01-692-3036
Mechanical Drive Housing

016923036
4N-4383: RNCC: 3 | RNVC: 2
4N-4383: RNCC: 5 | RNVC: 9

4 Dec 2020

3040-01-692-3032
Inertia Damper

016923032
177-9026: RNCC: 3 | RNVC: 2
177-9026: RNCC: 5 | RNVC: 9

4 Dec 2020

3040-01-692-3027
Pneumatic Rotor

016923027
4N-4381: RNCC: 3 | RNVC: 2
4N-4381: RNCC: 5 | RNVC: 9

4 Dec 2020

3040-01-692-2478
Hub

016922478
480090040M-A: RNCC: 3 | RNVC: 2
1806700009 REV 2 IT 8: RNCC: 5 | RNVC: 2

2 Dec 2020

3040-01-692-2479
Assembly Hub

016922479
A80090032M-A: RNCC: 3 | RNVC: 2
A816700009 REV - IT 1: RNCC: D | RNVC: 9

2 Dec 2020

3040-01-692-2443
Manual Control Lever Assembly

016922443
10091115: RNCC: 3 | RNVC: 2

2 Dec 2020

3040-01-692-2225
Special Flange

016922225
10087711: RNCC: 3 | RNVC: 2

1 Dec 2020

3040-01-692-2160
Straight Shaft Assembly

016922160
12639371: RNCC: 3 | RNVC: 2

30 Nov 2020

3040-01-692-1470
Mechanical Drive Housing

016921470
105-5138: RNCC: 3 | RNVC: 2
105-5138: RNCC: 5 | RNVC: 9

20 Nov 2020

3040-01-692-1456
Mechanically Actuated Spindle

016921456
5V6181: RNCC: 3 | RNVC: 2

20 Nov 2020

3040-01-692-1126
Shouldered Shaft

016921126
JE4120-34: RNCC: 3 | RNVC: 2
803-1624120 PC 34: RNCC: 5 | RNVC: 9
D000197: RNCC: D | RNVC: 9

19 Nov 2020

3040-01-692-1111
Nonaircraft Mechanical Actuator

016921111
167-8483300-PN-A6: RNCC: 3 | RNVC: 2
E541-0252-PN-A6: RNCC: 5 | RNVC: 2

19 Nov 2020

3040-01-692-0824
Rigid Connecting Link

016920824
3847AS137-1: RNCC: 3 | RNVC: 2

18 Nov 2020

3040-01-692-0631
Brake Backing Plate

016920631
10091062: RNCC: 3 | RNVC: 2

17 Nov 2020

3040-01-692-0600
Straight Shaft

016920600
10091132: RNCC: 3 | RNVC: 2
10091097 ITEM NO 6: RNCC: C | RNVC: 1

17 Nov 2020

3040-01-692-0366
Counterbalance Weight

016920366
422633CL1: RNCC: 3 | RNVC: 2

16 Nov 2020

3040-01-692-0351
Straight Shaft

016920351
MC-020337: RNCC: 3 | RNVC: 2
MC-035242-01: RNCC: C | RNVC: 1

16 Nov 2020

3040-01-692-0177
Shouldered Shaft

016920177
167-8483300-95: RNCC: 3 | RNVC: 2
E541-0252-PN-95: RNCC: 5 | RNVC: 2

13 Nov 2020

3040-01-691-9971
Nonaircraft Mechanical Actuator

016919971
ACT-EL-PS1200-4X-120A: RNCC: 3 | RNVC: 1

12 Nov 2020

3040-01-691-9698
Transmission Sleeve

016919698
073-1410-002-443: RNCC: 3 | RNVC: 2
999-1107-A46 ITEM 073B: RNCC: D | RNVC: 9

10 Nov 2020

3040-01-691-9235
Manual Control Lever

016919235
EP-0030337: RNCC: 3 | RNVC: 2

6 Nov 2020

3040-01-691-9047
Rigid Connecting Link

016919047
EP-0030306: RNCC: 3 | RNVC: 2

5 Nov 2020

3040-01-691-8485
Rigid Connecting Link

016918485
123CM93304-3: RNCC: 3 | RNVC: 2

2 Nov 2020

3040-01-691-8255
Manual Control Lever Assembly

016918255
EP-0022235: RNCC: 3 | RNVC: 2

30 Oct 2020

3040-01-691-8242
Rigid Connecting Link

016918242
EP-0030309: RNCC: 3 | RNVC: 2

30 Oct 2020

3040-01-691-7933
Control Pedal

016917933
EP-0028170: RNCC: 3 | RNVC: 2

29 Oct 2020

3040-01-691-7926
Manual Control Lever Assembly

016917926
EP-0030341: RNCC: 3 | RNVC: 2

29 Oct 2020

3040-01-691-7909
Manual Control Lever Assembly

016917909
EP-0030167: RNCC: 3 | RNVC: 2

29 Oct 2020

3040-01-691-7846
Flexible Drive Shaft

016917846
4N-4421: RNCC: 3 | RNVC: 2
4N-4421: RNCC: 5 | RNVC: 9

29 Oct 2020

3040-01-691-7842
Manual Control Lever

016917842
EP-0030327: RNCC: 3 | RNVC: 2

29 Oct 2020

3040-01-691-7724
Manual Control Lever

016917724
EP-0030342: RNCC: 3 | RNVC: 2

28 Oct 2020

3040-01-691-7689
Rigid Connecting Link

016917689
EP-0030081: RNCC: 3 | RNVC: 2

28 Oct 2020

3040-01-691-7578
Manual Control Lever Assembly

016917578
EP-0030128: RNCC: 3 | RNVC: 2

28 Oct 2020

3040-01-691-7574
Straight Shaft

016917574
EP-0022231: RNCC: 3 | RNVC: 2

28 Oct 2020

3040-01-691-7571
Control Pedal Assembly

016917571
EP-0023606: RNCC: 3 | RNVC: 2

28 Oct 2020

3040-01-691-7057
Shouldered Shaft

016917057
0270-1: RNCC: 3 | RNVC: 9

23 Oct 2020

3040-01-691-6940
Rigid Connecting Link

016916940
123CM13220-313: RNCC: 3 | RNVC: 9
123CM13220-313: RNCC: C | RNVC: 1

23 Oct 2020

3040-01-691-6928
Rigid Connecting Link

016916928
123CM93311-1: RNCC: 3 | RNVC: 9
123CM93311-1: RNCC: C | RNVC: 1

23 Oct 2020

3040-01-691-6709
Bell Crank

016916709
123CM13060-301: RNCC: 3 | RNVC: 9
123CM13060-301: RNCC: C | RNVC: 1

22 Oct 2020

3040-01-691-6692
Bell Crank

016916692
123CM93301-1: RNCC: 3 | RNVC: 9
123CM93301-1: RNCC: C | RNVC: 1

22 Oct 2020

3040-01-691-6690
Mechanical Drive Housing Part

016916690
123CM93313-13: RNCC: 3 | RNVC: 9
123CM93313-13: RNCC: C | RNVC: 1

22 Oct 2020

3040-01-691-6687
Mechanical Drive Housing Part

016916687
123CM93313-11: RNCC: 3 | RNVC: 9
123CM93313-11: RNCC: C | RNVC: 1

22 Oct 2020

3040-01-691-6657
Shouldered Shaft Assembly

016916657
123CM93302-3: RNCC: 3 | RNVC: 2
123CM93302-3: RNCC: 5 | RNVC: 2

22 Oct 2020

3040-01-691-6513
Straight Shaft

016916513
4G15271G01: RNCC: 3 | RNVC: 2
4G15271: RNCC: D | RNVC: 9

21 Oct 2020

3040-01-691-6453
Rigid Connecting Link

016916453
123CM93304-5: RNCC: 3 | RNVC: 2
123CM93304-5: RNCC: 5 | RNVC: 2

21 Oct 2020

3040-01-691-6396
Rigid Connecting Link

016916396
123CM93312-3: RNCC: 3 | RNVC: 9
123CM93312-3: RNCC: C | RNVC: 1

21 Oct 2020

3040-01-691-6402
Rigid Connecting Link

016916402
123CM13057-301: RNCC: 3 | RNVC: 9
123CM13057-301: RNCC: C | RNVC: 1

21 Oct 2020

3040-01-691-6397
Rigid Connecting Link

016916397
123CM93312-1: RNCC: 3 | RNVC: 9
123CM93312-1: RNCC: C | RNVC: 1

21 Oct 2020

3040-01-691-5927
Rigid Connecting Link

016915927
072249: RNCC: 3 | RNVC: 2

19 Oct 2020

3040-01-691-5872
Linear Actuating Cylinder Assembly

016915872
HV2 72BN-03.25-19.00-1375-S119: RNCC: 3 | RNVC: 2
D-WK-871-62/ SHT1 NOTE 3: RNCC: 5 | RNVC: 2
D-WK-871-62 REV B NOTE 3: RNCC: 5 | RNVC: 2

19 Oct 2020

3040-01-691-5421
Straight Shaft

016915421
8592087-002-SP: RNCC: 3 | RNVC: 2
8592087-002: RNCC: 3 | RNVC: 9
5155-002-SP: RNCC: 5 | RNVC: 2
8592087-002-SP: RNCC: 5 | RNVC: 2
5155-002: RNCC: 5 | RNVC: 9
243-8592226 FN 14: RNCC: C | RNVC: 1
8592226: RNCC: D | RNVC: 9

15 Oct 2020

3040-01-691-5410
Mechanically Actuated Spindle

016915410
D001361-W02-016: RNCC: 3 | RNVC: 2
D001361 ITEM NO 2.15: RNCC: C | RNVC: 1

15 Oct 2020

3040-01-691-5304
Transmission Sleeve

016915304
014-1420004-552: RNCC: 3 | RNVC: 2
999-1110-C-06 ITEM 14: RNCC: C | RNVC: 1

15 Oct 2020

3040-01-691-5272
Transmission Sleeve

016915272
014-1430005-552: RNCC: 3 | RNVC: 2
999-4213-E-21 ITEM NO 14: RNCC: C | RNVC: 1

14 Oct 2020

3040-01-691-5265
Transmission Sleeve

016915265
014-1630007-202: RNCC: 3 | RNVC: 2
999-4210-D16 ITEM 14: RNCC: C | RNVC: 1

14 Oct 2020

3040-01-691-5225
Nonaircraft Mechanical Actuator

016915225
0511/45-S634N-100: RNCC: 3 | RNVC: 2
0511PL REV Y 0511/45-S634N-100: RNCC: 5 | RNVC: 2
0511 REV W P/N 0511/45-S634N-100: RNCC: 5 | RNVC: 2

14 Oct 2020

3040-01-691-5207
Shaft Retaining Plate

016915207
4W2521001M-A: RNCC: 3 | RNVC: 2
1W25M00014 REV - IT 2: RNCC: 5 | RNVC: 2

14 Oct 2020

3040-01-691-5201
Extension Shaft

016915201
52605-2-145-000: RNCC: 3 | RNVC: 2
0511PL REV Y FND 6 P/N 52605-2-1: RNCC: 5 | RNVC: 2
0511/ PL REV Y SHT 3 FND 6: RNCC: 5 | RNVC: 2

14 Oct 2020

3040-01-691-5076
Mechanical Drive Housing

016915076
8M0142320: RNCC: 3 | RNVC: 2

14 Oct 2020

3040-01-691-4067
Shouldered Shaft

016914067
014-1410005-552: RNCC: 3 | RNVC: 2

7 Oct 2020

3040-01-691-3282
Shouldered Shaft

016913282
218K446G01: RNCC: 3 | RNVC: 2
218K446: RNCC: D | RNVC: 9

5 Oct 2020

3040-01-691-3171
Rigid Connecting Link

016913171
218K460G01: RNCC: 3 | RNVC: 2
218K460: RNCC: D | RNVC: 9

2 Oct 2020

3040-01-691-3076
Electrical-Fluid Pressure Connector Assembly

016913076
608-8203009ITEMII-199: RNCC: 3 | RNVC: 2

2 Oct 2020

3040-01-691-2979
Rigid Connecting Link

016912979
160-020973-G001: RNCC: 3 | RNVC: 2
160-020973: RNCC: D | RNVC: 9

2 Oct 2020

3040-01-691-2850
Nonrotating Shaft Eye Bracket

016912850
255K294H01: RNCC: 3 | RNVC: 2
255K294: RNCC: D | RNVC: 9

1 Oct 2020

3040-01-691-2851
Nonrotating Shaft Eye Bracket

016912851
255K294G01: RNCC: 3 | RNVC: 2
255K294: RNCC: D | RNVC: 9

1 Oct 2020

3040-01-691-2631
Rigid Connecting Link

016912631
308K263G01: RNCC: 3 | RNVC: 2
308K263: RNCC: D | RNVC: 9

30 Sep 2020

3040-01-691-2630
Rigid Connecting Link

016912630
261K109H02: RNCC: 3 | RNVC: 2
261K109: RNCC: D | RNVC: 9

30 Sep 2020

3040-01-691-2627
Rigid Connecting Link

016912627
184K316G01: RNCC: 3 | RNVC: 2
184K316: RNCC: D | RNVC: 9

30 Sep 2020

3040-01-691-2624
Rigid Connecting Link

016912624
218K457G01: RNCC: 3 | RNVC: 2
218K457: RNCC: D | RNVC: 9

30 Sep 2020

3040-01-691-2482
Hub Clamp

016912482
8226742: RNCC: 3 | RNVC: 2

29 Sep 2020

3040-01-691-1974
Housing Adapter

016911974
560-500557-P003: RNCC: 3 | RNVC: 2
560-500557 FIND NUMBER 3: RNCC: C | RNVC: 1
560-500557: RNCC: D | RNVC: 9

25 Sep 2020

3040-01-691-1961
Housing Adapter

016911961
560-500557-P002: RNCC: 3 | RNVC: 2
560-500557 FIND NUMBER 2: RNCC: C | RNVC: 1
560-500557: RNCC: D | RNVC: 9

25 Sep 2020

3040-01-691-1947
Housing Adapter

016911947
560-500557-P001: RNCC: 3 | RNVC: 2
560-500557 FIND NUMBER 1: RNCC: C | RNVC: 1
560-500557: RNCC: D | RNVC: 9

25 Sep 2020

3040-01-691-1890
Housing Adapter

016911890
160-020969-P003: RNCC: 3 | RNVC: 2
160-020969 FIND NUMBER 3: RNCC: C | RNVC: 1
160-020969: RNCC: D | RNVC: 9

25 Sep 2020

3040-01-691-1882
Housing Adapter

016911882
160-020969-P001: RNCC: 3 | RNVC: 2
160-020969 FIND NUMBER 1: RNCC: C | RNVC: 1
160-020969: RNCC: D | RNVC: 9

25 Sep 2020

3040-01-691-1823
Straight Shaft

016911823
A80A070001-A: RNCC: 3 | RNVC: 2
A816700009 REV - IT 7: RNCC: C | RNVC: 1

24 Sep 2020

3040-01-691-1649
Rigid Connecting Link

016911649
600-020974-P001: RNCC: 3 | RNVC: 2
600-020974: RNCC: D | RNVC: 9

24 Sep 2020

3040-01-691-1597
Rigid Connecting Link

016911597
600-020975-P001: RNCC: 3 | RNVC: 2
600-020975: RNCC: D | RNVC: 9

24 Sep 2020

3040-01-691-0890
Level With Pad

016910890
8470206-2: RNCC: 3 | RNVC: 2
8470206 REV B SHEET 1 NOTES: RNCC: 5 | RNVC: 2

21 Sep 2020

3040-01-691-0521
Linear Actuating Cylinder Assembly

016910521
DD-3012-A4/SSE-1/10MT-2/CD/43.0-: RNCC: 3 | RNVC: 1
DD-3012-A4/SSE-1/10MT-2/CD/43.0-: RNCC: 5 | RNVC: 1

18 Sep 2020

3040-01-691-0489
Composite Shaft

016910489
280670005M-A: RNCC: 3 | RNVC: 2
1806700009 REV 2 IT 3: RNCC: 5 | RNVC: 2

17 Sep 2020

3040-01-691-0340
Hydraulic Accumulator Cylinder

016910340
1HRDH000251549: RNCC: 3 | RNVC: 2
1HRDH000251549-ID REV B: RNCC: D | RNVC: 9

17 Sep 2020

3040-01-691-0171
Piston Rod Guide

016910171
DN60-2.5-F-11: RNCC: 3 | RNVC: 2
DN60-0051 ITEM 10: RNCC: 5 | RNVC: 2

16 Sep 2020

3040-01-691-0170
Brake Disc

016910170
100615: RNCC: 3 | RNVC: 2
8522531: RNCC: 7 | RNVC: 2
8522531/SHEET 1SOURCE OF SUPPLY: RNCC: C | RNVC: 1

16 Sep 2020

3040-01-690-9571
Manual Control Lever

016909571
845-7108936 ASSY J: RNCC: 3 | RNVC: 2
845-8616941-ITEM NO-55: RNCC: 5 | RNVC: 2
2644-405-11-ITEM NO-55: RNCC: 5 | RNVC: 2
2641-809-40 ASSY J: RNCC: 5 | RNVC: 2

11 Sep 2020

3040-01-690-9562
Linear Actuating Cylinder Cap

016909562
CB92072-001: RNCC: 3 | RNVC: 2
CB85016-ITEM-10: RNCC: 5 | RNVC: 2

11 Sep 2020

3040-01-690-9265
Nonaircraft Mechanical Actuator

016909265
ACT-EL-PS1200-4X-120A-MO: RNCC: 3 | RNVC: 2

10 Sep 2020

3040-01-690-9154
Rigid Connecting Link

016909154
8599604-001: RNCC: 3 | RNVC: 2

10 Sep 2020

3040-01-690-9067
Stub

016909067
4106AS0137-1: RNCC: 3 | RNVC: 2

9 Sep 2020

3040-01-690-8618
Cushion Va Bow Thruster Actuator

016908618
8592240-001: RNCC: 1 | RNVC: 2
60560: RNCC: 3 | RNVC: 2
8592242-001: RNCC: 5 | RNVC: 2
568-8592249 FN 41: RNCC: 5 | RNVC: 2
568-8592242 FN 1: RNCC: D | RNVC: 9
568-8592240 FN 1: RNCC: D | RNVC: 9
568-8592253 FN 4: RNCC: D | RNVC: 9

4 Sep 2020

3040-01-690-8609
Brake Arm

016908609
403587: RNCC: 3 | RNVC: 2
601515 REV - ITEM 4: RNCC: 5 | RNVC: 2

4 Sep 2020

3040-01-690-8604
Composite Shaft

016908604
280670006M-A: RNCC: 3 | RNVC: 2
1806700009 REV 2 ITEM 2: RNCC: D | RNVC: 9

4 Sep 2020

3040-01-690-8558
Hydraulic Accumulator

016908558
373-6964: RNCC: 3 | RNVC: 2

4 Sep 2020

3040-01-690-8264
Worm Wheel Gearshaft

016908264
2872001: RNCC: 3 | RNVC: 2

3 Sep 2020

3040-01-690-8265
Worm Wheel Gearshaft

016908265
2871996: RNCC: 3 | RNVC: 2

3 Sep 2020

3040-01-690-8244
Assembly Composite

016908244
AA880A060001-A: RNCC: 3 | RNVC: 2
A816700009 REV ITEM 6: RNCC: 5 | RNVC: 2
A816700009: RNCC: D | RNVC: 9

2 Sep 2020

3040-01-690-7972
Counterbalance Weight

016907972
201416722-05: RNCC: 3 | RNVC: 2

1 Sep 2020

3040-01-690-7916
Wear Bar

016907916
P009338: RNCC: 3 | RNVC: 2
F135003 REV G ITEM NO. 24: RNCC: 5 | RNVC: 2

1 Sep 2020

3040-01-690-7426
Shouldered Shaft

016907426
8598064-001: RNCC: 3 | RNVC: 2

28 Aug 2020

3040-01-690-7419
Rigid Connecting Link

016907419
12591740: RNCC: 3 | RNVC: 2

28 Aug 2020

3040-01-690-7415
Control Cam

016907415
12591743: RNCC: 3 | RNVC: 2

28 Aug 2020

3040-01-690-7377
Nonaircraft Mechanical Actuator

016907377
57990-00: RNCC: 3 | RNVC: 2
501-8692869 PAGE 8 ITEM NO 6: RNCC: 5 | RNVC: 1
8692869 / PAGE 8 ITEM NO 6: RNCC: 5 | RNVC: 1

28 Aug 2020

3040-01-690-7289
Rigid Connecting Link

016907289
8599491-001: RNCC: 3 | RNVC: 2
8599491: RNCC: D | RNVC: 9

28 Aug 2020

3040-01-690-7288
Shaft Collar

016907288
6435K13: RNCC: 3 | RNVC: 1

28 Aug 2020

3040-01-690-7158
Body Hub

016907158
A80090033M-A: RNCC: 3 | RNVC: 2
AW25M100014 REV- IT 1: RNCC: C | RNVC: 1
AW25M100014: RNCC: D | RNVC: 9

27 Aug 2020

3040-01-690-7100
Piston Ring

016907100
13047862: RNCC: 1 | RNVC: 2
E-19212: RNCC: 3 | RNVC: 2
TVC30M325AT99SD: RNCC: 3 | RNVC: 2

27 Aug 2020

3040-01-690-7079
Control Cam

016907079
8599860-001: RNCC: 3 | RNVC: 2

27 Aug 2020

3040-01-690-7005
Piston Ring

016907005
13047860: RNCC: 1 | RNVC: 2
RVAANB029AT99SM: RNCC: 3 | RNVC: 2

27 Aug 2020

3040-01-690-6608
Spur Gearshaft

016906608
75158: RNCC: 3 | RNVC: 2
74054 SH5 ITEM 1: RNCC: C | RNVC: 1
74054: RNCC: D | RNVC: 9

25 Aug 2020

3040-01-690-6579
Straight Shaft Assembly

016906579
8598054-001: RNCC: 3 | RNVC: 2

25 Aug 2020

3040-01-690-6268
Rotating Shaft Eye Bracket

016906268
8598258-001: RNCC: 3 | RNVC: 2

24 Aug 2020

3040-01-690-6246
Straight Shaft

016906246
8598065-001: RNCC: 3 | RNVC: 2

24 Aug 2020

3040-01-690-6085
Rigid Connecting Link

016906085
KL16K4T12-5: RNCC: 3 | RNVC: 2
90044183: RNCC: 5 | RNVC: 2

21 Aug 2020

3040-01-690-5999
Rigid Connecting Link

016905999
5P-8672: RNCC: 3 | RNVC: 2

21 Aug 2020

3040-01-690-5929
Body Hub

016905929
72B-9701-13: RNCC: 3 | RNVC: 2

20 Aug 2020

3040-01-690-5605
Hub Cam

016905605
72B-9701-9: RNCC: 3 | RNVC: 2

19 Aug 2020

3040-01-690-5032
Linear Actuating Cylinder Assembly

016905032
100014G: RNCC: 3 | RNVC: 2

14 Aug 2020

3040-01-690-4952
Brake Disc

016904952
70027022: RNCC: 3 | RNVC: 2
70027022: RNCC: 3 | RNVC: 2

14 Aug 2020

3040-01-690-4891
Straight Shaft

016904891
221K718H04: RNCC: 3 | RNVC: 2
221K718: RNCC: D | RNVC: 9

14 Aug 2020

3040-01-690-4894
Mechanical Drive Housing

016904894
8M0142319: RNCC: 3 | RNVC: 2

14 Aug 2020

3040-01-690-4886
Linear Actuating Cylinder Head

016904886
CB92066-001: RNCC: 3 | RNVC: 2

14 Aug 2020

3040-01-690-4880
Rigid Connecting Link

016904880
221K717H03: RNCC: 3 | RNVC: 2
221K717: RNCC: D | RNVC: 9

14 Aug 2020

3040-01-690-4876
Rigid Connecting Link

016904876
221K717H04: RNCC: 3 | RNVC: 2
221K717: RNCC: D | RNVC: 9

14 Aug 2020

3040-01-690-4785
Shouldered Shaft

016904785
70026536: RNCC: 3 | RNVC: 2

13 Aug 2020

3040-01-690-4552
Rigid Connecting Link

016904552
90044180: RNCC: 3 | RNVC: 2
KL16K4T12-2: RNCC: 5 | RNVC: 2

12 Aug 2020

3040-01-690-4550
Rigid Connecting Link

016904550
90044181: RNCC: 3 | RNVC: 2
KL16K4T12-3: RNCC: 5 | RNVC: 2

12 Aug 2020

3040-01-690-4325
Oil Pan Parts Kit

016904325
BC3Z-7A194-B: RNCC: 3 | RNVC: 9

12 Aug 2020

3040-01-690-3775
Rigid Connecting Link

016903775
221K700G01: RNCC: 3 | RNVC: 2
221K700: RNCC: D | RNVC: 9

10 Aug 2020

3040-01-690-3786
Rigid Connecting Link

016903786
221K718H02: RNCC: 3 | RNVC: 2
221K718: RNCC: D | RNVC: 9

10 Aug 2020

3040-01-690-3784
Rigid Connecting Link

016903784
221K718H05: RNCC: 3 | RNVC: 2
221K718: RNCC: D | RNVC: 9

10 Aug 2020

3040-01-690-3459
Rigid Connecting Link

016903459
12929342: RNCC: 3 | RNVC: 2

7 Aug 2020

3040-01-690-3198
Shouldered Shaft

016903198
328-9184: RNCC: 3 | RNVC: 2

6 Aug 2020

3040-01-690-3189
Shouldered Axle

016903189
03303659: RNCC: 3 | RNVC: 2

6 Aug 2020

3040-01-690-3175
Nonrotating Shaft Eye Bracket

016903175
03306513: RNCC: 3 | RNVC: 2

6 Aug 2020

3040-01-690-2974
Differential Gear Unit

016902974
3235-F-2164: RNCC: 3 | RNVC: 2

5 Aug 2020

3040-01-690-0936
Housing Adapter

016900936
47643-383-000: RNCC: 3 | RNVC: 2
N47693/ PARTS LIST ITEM 3: RNCC: 5 | RNVC: 2
PL N47693 REV G: RNCC: D | RNVC: 9

24 Jul 2020

3040-01-690-0528
Rigid Connecting Link

016900528
04080441: RNCC: 3 | RNVC: 2
7662460: RNCC: 5 | RNVC: 2
7662460/SHEET 1: RNCC: D | RNVC: 9

23 Jul 2020

3040-01-690-0028
Shouldered Shaft

016900028
167-7044216 PC NO. 104(MOD 66MM): RNCC: 3 | RNVC: 2
167-7044216-104(MOD 66MM): RNCC: 5 | RNVC: 2

21 Jul 2020

3040-01-689-9686
Linear Actuating Cylinder Assembly

016899686
WK-871-148: RNCC: 3 | RNVC: 2
WK-871-148 REV: RNCC: C | RNVC: 1
WK-871-148/ SHT 1: RNCC: D | RNVC: 9

20 Jul 2020

3040-01-689-9667
Linear Actuating Cylinder Assembly

016899667
WK-871-147: RNCC: 3 | RNVC: 2
WK-871-147 REV: RNCC: C | RNVC: 1
WK-871-147/ SHT 1: RNCC: D | RNVC: 9

20 Jul 2020

3040-01-689-9312
Straight Shaft

016899312
0FV8150A01M13: RNCC: 3 | RNVC: 9
0FV8150A01M13: RNCC: 5 | RNVC: 9
0FV8150A01M13: RNCC: C | RNVC: 1

16 Jul 2020

3040-01-689-8900
Linear Actuating Cylinder Assembly

016898900
WK-871-149: RNCC: 3 | RNVC: 2

15 Jul 2020

3040-01-689-8582
Counterbalance Weight

016898582
505551-616: RNCC: 3 | RNVC: 1
FF17363PC7,16: RNCC: 5 | RNVC: 1

14 Jul 2020

3040-01-689-8407
Linear Actuating Cylinder Assembly

016898407
4651639: RNCC: 3 | RNVC: 2

14 Jul 2020

3040-01-689-8352
Hydraulic Accumulator Piston Rod

016898352
1661879: RNCC: 3 | RNVC: 2

14 Jul 2020

3040-01-689-8235
Bell Crank

016898235
7013358: RNCC: 3 | RNVC: 2

13 Jul 2020

3040-01-689-8078
Bevel Gear And Shaft Assembly

016898078
3860873-4: RNCC: 3 | RNVC: 2

13 Jul 2020

3040-01-689-8002
Shouldered Shaft

016898002
7662408: RNCC: 3 | RNVC: 2
7662408: RNCC: 5 | RNVC: 2
7662408/SHEET 1: RNCC: D | RNVC: 9

10 Jul 2020

3040-01-689-7946
Rigid Connecting Link

016897946
915-151.26: RNCC: 3 | RNVC: 2
1231-1100: RNCC: D | RNVC: 9

10 Jul 2020

3040-01-689-7705
Mechanical Drive Housing

016897705
3596AS645-1: RNCC: 3 | RNVC: 2

9 Jul 2020

3040-01-689-7185
Nonaircraft Mechanical Actuator

016897185
90044189: RNCC: 3 | RNVC: 2
KL16K4T12-11: RNCC: 5 | RNVC: 2

7 Jul 2020

3040-01-689-6688
Piston Ring

016896688
1U2174X0012: RNCC: 3 | RNVC: 2

2 Jul 2020

3040-01-689-6650
Brake Arm

016896650
3596AS618-1: RNCC: 3 | RNVC: 2

2 Jul 2020

3040-01-689-6647
Shouldered Shaft

016896647
3596AS631-1: RNCC: 3 | RNVC: 2

2 Jul 2020

3040-01-689-6148
Linear Actuating Cylinder Assembly

016896148
518-8837: RNCC: 3 | RNVC: 2

30 Jun 2020

3040-01-689-6137
Linear Actuating Cylinder Assembly

016896137
526-8033: RNCC: 3 | RNVC: 2

30 Jun 2020

3040-01-689-5936
Flexible Casing End Fitting

016895936
3596AS233-1: RNCC: 3 | RNVC: 2

29 Jun 2020

3040-01-689-5752
Mechanical Drive Housing

016895752
8M0142304: RNCC: 3 | RNVC: 2

29 Jun 2020

3040-01-689-5658
Control Cable Assembly

016895658
80030620: RNCC: 3 | RNVC: 2

26 Jun 2020

3040-01-689-5093
Shouldered Shaft

016895093
8703124: RNCC: 3 | RNVC: 2

24 Jun 2020

3040-01-689-4820
Shouldered Shaft

016894820
8703126: RNCC: 3 | RNVC: 2

23 Jun 2020

3040-01-689-4623
Pawl

016894623
4015005: RNCC: 3 | RNVC: 2

23 Jun 2020

3040-01-689-4595
Nonaircraft Mechanical Actuator

016894595
3596AS651-8: RNCC: 3 | RNVC: 2
3596AS651: RNCC: D | RNVC: 9

23 Jun 2020

3040-01-689-4290
Linear Actuating Cylinder Assembly

016894290
53331: RNCC: 3 | RNVC: 9
3596AS309-1: RNCC: 7 | RNVC: 2
3596AS309: RNCC: D | RNVC: 9

19 Jun 2020

3040-01-689-4201
Rigid Connecting Link

016894201
7013359: RNCC: 3 | RNVC: 2

19 Jun 2020

3040-01-689-3528
Shouldered Shaft

016893528
80471-15: RNCC: 3 | RNVC: 2

16 Jun 2020

3040-01-689-3458
Mechanically Actuated Spindle

016893458
167-7044216 PC NO. 79 (MOD 66MM): RNCC: 3 | RNVC: 2

16 Jun 2020

3040-01-689-3457
Shouldered Shaft Assembly

016893457
3596AS610-1: RNCC: 3 | RNVC: 2
3596AS610: RNCC: D | RNVC: 9

16 Jun 2020

3040-01-689-3397
Rigid Connecting Link

016893397
05-052820: RNCC: 3 | RNVC: 2

16 Jun 2020

3040-01-689-3274
Rigid Connecting Link

016893274
412T3210-85: RNCC: 3 | RNVC: 1

15 Jun 2020

3040-01-689-2798
Straight Shaft

016892798
SE111083P1: RNCC: 3 | RNVC: 2

12 Jun 2020

3040-01-689-2727
Rigid Connecting Link

016892727
412T3210-86: RNCC: 3 | RNVC: 1

11 Jun 2020

3040-01-689-2200
Rigid Connecting Link

016892200
1601516-01: RNCC: 3 | RNVC: 2

10 Jun 2020

3040-01-689-1744
Grease Cap

016891744
1004790-P11: RNCC: 3 | RNVC: 2

8 Jun 2020

3040-01-689-1702
Friction Lining

016891702
RB1-A25-16012-7: RNCC: 3 | RNVC: 2
16-08037: RNCC: D | RNVC: 9

8 Jun 2020

3040-01-689-1363
Spur Gearshaft

016891363
367733-7: RNCC: 3 | RNVC: 2

6 Jun 2020

3040-01-689-1325
Straight Shaft Assembly

016891325
06371-05801-102: RNCC: 3 | RNVC: 2

5 Jun 2020

3040-01-689-1316
Bevel Gearshaft

016891316
06371-10801-103: RNCC: 3 | RNVC: 2

5 Jun 2020

3040-01-689-1311
Straight Shaft

016891311
06100-08516-042: RNCC: 3 | RNVC: 2

5 Jun 2020

3040-01-689-0985
Breather

016890985
ABC-315: RNCC: 3 | RNVC: 2

4 Jun 2020

3040-01-689-0446
Flexible Shaft Assembly

016890446
22001-100X21FT8IN: RNCC: 3 | RNVC: 2
22001-100X260IN: RNCC: 5 | RNVC: 2
22001: RNCC: D | RNVC: 9

3 Jun 2020

3040-01-689-0429
Flexible Shaft Assembly

016890429
22001-100X11FT7IN: RNCC: 3 | RNVC: 2
22001-100X140IN: RNCC: 5 | RNVC: 2
22001: RNCC: D | RNVC: 9

3 Jun 2020

3040-01-689-0423
Flexible Shaft Assembly

016890423
22001-100X16FT8IN: RNCC: 3 | RNVC: 2
22001-100X200IN: RNCC: 5 | RNVC: 2
22001: RNCC: D | RNVC: 9

3 Jun 2020

3040-01-689-0398
Flexible Shaft Assembly

016890398
22001-100X34FT7IN: RNCC: 3 | RNVC: 2
22001-100X415IN: RNCC: 5 | RNVC: 2
22001: RNCC: D | RNVC: 9

3 Jun 2020

3040-01-689-0396
Flexible Shaft Assembly

016890396
22001-100X12FT11IN: RNCC: 3 | RNVC: 2
22001-100X155IN: RNCC: 5 | RNVC: 2
22001: RNCC: D | RNVC: 9

3 Jun 2020

3040-01-689-0391
Flexible Shaft Assembly

016890391
22001-100X16FT3IN: RNCC: 3 | RNVC: 2
22001-100X195IN: RNCC: 5 | RNVC: 2
22001: RNCC: D | RNVC: 9

3 Jun 2020

3040-01-689-0197
Rigid Connecting Link

016890197
412T3212-21: RNCC: 3 | RNVC: 1

2 Jun 2020

3040-01-689-0108
Flexible Shaft Assembly

016890108
22001-100X8FT4IN: RNCC: 3 | RNVC: 2
22001-100X100IN: RNCC: 5 | RNVC: 2
22001: RNCC: D | RNVC: 9

2 Jun 2020

3040-01-689-0104
Flexible Shaft Assembly

016890104
22001-100X9FT7IN: RNCC: 3 | RNVC: 2
22001-100X115IN: RNCC: 5 | RNVC: 2
22001: RNCC: D | RNVC: 9

2 Jun 2020

3040-01-688-9780
Rigid Connecting Link

016889780
412T3008-14: RNCC: 3 | RNVC: 1

2 Jun 2020

3040-01-688-9865
Nonaircraft Mechanical Actuator

016889865
12317: RNCC: 3 | RNVC: 2
18-0824/REV 03 SHEET 6 PC NO. 1*: RNCC: C | RNVC: 1

2 Jun 2020

3040-01-688-9598
Remote Control Lever

016889598
08864-242A: RNCC: 3 | RNVC: 2

1 Jun 2020

3040-01-688-8975
Flexible Shaft Assembly

016888975
22001-100X150IN: RNCC: 3 | RNVC: 2
22001-100X12FT6IN: RNCC: 3 | RNVC: 2
22001: RNCC: D | RNVC: 9

29 May 2020

3040-01-688-8970
Flexible Shaft Assembly

016888970
22001-100X20FT5IN: RNCC: 3 | RNVC: 2
22001-100X245IN: RNCC: 3 | RNVC: 2
22001: RNCC: D | RNVC: 9

29 May 2020

3040-01-688-8967
Flexible Shaft Assembly

016888967
22001-100X16IN: RNCC: 3 | RNVC: 2
22001-100X1FT4IN: RNCC: 3 | RNVC: 2
22001: RNCC: D | RNVC: 9

29 May 2020

3040-01-688-8931
Flexible Shaft Assembly

016888931
22001-100X9FT2IN: RNCC: 3 | RNVC: 2
22001-100X110IN: RNCC: 3 | RNVC: 2
22001: RNCC: D | RNVC: 9

29 May 2020

3040-01-688-8929
Flexible Shaft Assembly

016888929
22001-100X8FT9IN: RNCC: 3 | RNVC: 2
22001-100X105IN: RNCC: 3 | RNVC: 2
22001: RNCC: D | RNVC: 9

29 May 2020

3040-01-688-8923
Flexible Shaft Assembly

016888923
22001-100X18FT9IN: RNCC: 3 | RNVC: 2
22001-100X225IN: RNCC: 3 | RNVC: 2
22001: RNCC: D | RNVC: 9

29 May 2020

3040-01-688-8917
Flexible Shaft Assembly

016888917
22001-100X300IN: RNCC: 3 | RNVC: 2
22001-100X25FT: RNCC: 3 | RNVC: 2
22001: RNCC: D | RNVC: 9

29 May 2020

3040-01-688-8123
Shouldered Shaft

016888123
8198998: RNCC: 3 | RNVC: 2
8198998: RNCC: 5 | RNVC: 2
8198998/SHEET 1: RNCC: D | RNVC: 9

27 May 2020

3040-01-688-8084
Shouldered Shaft

016888084
08002364: RNCC: 3 | RNVC: 2
PL-08001601 FIND NO 40: RNCC: 5 | RNVC: 2
08002364: RNCC: 5 | RNVC: 9

27 May 2020

3040-01-688-8012
Mobility Cylinder

016888012
3596AS319-1: RNCC: 3 | RNVC: 2
B3596AS319-1: RNCC: 5 | RNVC: 2

27 May 2020

3040-01-688-7821
Rigid Connecting Link

016887821
412T3008-13: RNCC: 3 | RNVC: 1

26 May 2020

3040-01-688-7816
Rigid Connecting Link

016887816
412T3008-15: RNCC: 3 | RNVC: 1

26 May 2020

3040-01-688-7815
Rigid Connecting Link

016887815
412T3008-16: RNCC: 3 | RNVC: 1

26 May 2020

3040-01-688-7805
Rigid Connecting Link

016887805
412T3008-18: RNCC: 3 | RNVC: 1

26 May 2020

3040-01-688-7806
Rigid Connecting Link

016887806
412T3008-17: RNCC: 3 | RNVC: 1

26 May 2020

3040-01-688-7802
Rigid Connecting Link

016887802
412T3008-19: RNCC: 3 | RNVC: 1

26 May 2020

3040-01-688-7122
Manual Control Lever

016887122
8198995: RNCC: 3 | RNVC: 2
8198995: RNCC: 5 | RNVC: 2

22 May 2020

3040-01-688-5643
Grease Cap

016885643
08002375: RNCC: 3 | RNVC: 2
08001601/SHT 6 FN NO 129: RNCC: 5 | RNVC: 2
PL-08001601 FIND NO 129: RNCC: 5 | RNVC: 2
08002375: RNCC: 5 | RNVC: 9

20 May 2020

3040-01-688-4392
Worm Gear Assembly

016884392
3596AS230-1: RNCC: 3 | RNVC: 2
3596AS230-1: RNCC: 3 | RNVC: 2
3596AS230-1: RNCC: 3 | RNVC: 2
B3596AS230-1: RNCC: 5 | RNVC: 2

17 May 2020

3040-01-688-3794
Control Cable Assembly

016883794
415MV004-052: RNCC: 3 | RNVC: 2

14 May 2020

3040-01-688-3558
Housing Adapter

016883558
12584517: RNCC: 3 | RNVC: 2

14 May 2020

3040-01-688-3443
Shouldered Shaft Assembly

016883443
314013: RNCC: 3 | RNVC: 2

13 May 2020

3040-01-688-3120
Rigid Connecting Link

016883120
AL4002110: RNCC: 3 | RNVC: 2
AL4002110: RNCC: 5 | RNVC: 2

12 May 2020

3040-01-688-3077
Mechanical Drive Housing

016883077
ED0092019660-S: RNCC: 3 | RNVC: 2

12 May 2020

3040-01-688-2614
Drive Shelf Unit

016882614
IPC30117AA: RNCC: 3 | RNVC: 2
026-51746-000: RNCC: C | RNVC: 1

11 May 2020

3040-01-688-2410
Housing Adapter

016882410
189-698: RNCC: 3 | RNVC: 2

8 May 2020

3040-01-688-2128
Spur Gearshaft

016882128
3-P-283X: RNCC: 3 | RNVC: 2

7 May 2020

3040-01-688-2076
Rigid Connecting Link

016882076
803-1624106 PC 150: RNCC: 3 | RNVC: 2
803-1624094 REV F PC NO 150: RNCC: 5 | RNVC: 2
803-1624106 REV C PC NO 150: RNCC: 5 | RNVC: 2
1624106/SHEET 2 PC 150: RNCC: D | RNVC: 9

7 May 2020

3040-01-688-1750
Rigid Connecting Link

016881750
803-1624106 PC151: RNCC: 3 | RNVC: 2
803-1624094 REV F PC NO151: RNCC: 5 | RNVC: 2
803-1624106 REV C PC NO151: RNCC: 5 | RNVC: 2
1624106/SHEET 2/NO 151: RNCC: D | RNVC: 9

6 May 2020

3040-01-688-1599
Shouldered Shaft

016881599
413-10728-1: RNCC: 3 | RNVC: 2

6 May 2020

3040-01-688-1593
Shouldered Shaft

016881593
413-10743-1: RNCC: 3 | RNVC: 2

6 May 2020

3040-01-688-1577
Shouldered Shaft

016881577
413-10745-1: RNCC: 3 | RNVC: 2

6 May 2020

3040-01-688-1042
Nonaircraft Mechanical Actuator

016881042
600-500832-G001: RNCC: 3 | RNVC: 2
600-500832: RNCC: D | RNVC: 9

4 May 2020

3040-01-688-0778
Shouldered Shaft

016880778
413-10632-1: RNCC: 3 | RNVC: 2
413-10632: RNCC: D | RNVC: 9

1 May 2020

3040-01-688-0696
Shouldered Shaft

016880696
00-875915: RNCC: 3 | RNVC: 2

1 May 2020

3040-01-688-0445
Mechanically Actuated Spindle

016880445
2126-3429-050: RNCC: 3 | RNVC: 2

30 Apr 2020

3040-01-688-0146
Nonaircraft Mechanical Actuator

016880146
600-500832-G002: RNCC: 3 | RNVC: 2
600-500832: RNCC: D | RNVC: 9

29 Apr 2020

3040-01-687-9979
Mechanical Drive Housing

016879979
12976615: RNCC: 3 | RNVC: 2

29 Apr 2020

3040-01-687-9830
Straight Shaft

016879830
9808616: RNCC: 3 | RNVC: 2

28 Apr 2020

3040-01-687-9587
Rigid Connecting Link

016879587
712847-02: RNCC: 3 | RNVC: 2

27 Apr 2020

3040-01-687-9360
Straight Shaft

016879360
23948-01: RNCC: 3 | RNVC: 2
98480: RNCC: D | RNVC: 9

24 Apr 2020

3040-01-687-9332
Spur Gearshaft

016879332
4530-2-029-000: RNCC: 3 | RNVC: 2
4600/PL/REV L/FIND NO.20: RNCC: 5 | RNVC: 2

24 Apr 2020

3040-01-687-9318
Linear Actuating Cylinder Cap

016879318
G106001333-1: RNCC: 3 | RNVC: 2

24 Apr 2020

3040-01-687-9242
Planetary Gears Carrier

016879242
4609-999-000: RNCC: 3 | RNVC: 2
4600/PL/REV L/FIND NO.21: RNCC: 5 | RNVC: 2
4609-120-000: RNCC: 5 | RNVC: 9

24 Apr 2020

3040-01-687-8870
Bell Crank

016878870
W-NR-03-00: RNCC: 3 | RNVC: 2

23 Apr 2020

3040-01-687-8323
Shouldered Shaft Assembly

016878323
167-6404330-FIND NO 92,94,96,98: RNCC: 3 | RNVC: 2

21 Apr 2020

3040-01-687-8139
Rigid Connecting Link

016878139
160-020968-G001: RNCC: 3 | RNVC: 2
160-020968: RNCC: D | RNVC: 9

20 Apr 2020

3040-01-687-8036
Extension Shaft

016878036
SF320SH5X5: RNCC: 3 | RNVC: 2

20 Apr 2020

3040-01-687-7991
Shouldered Shaft

016877991
7-511315101-003: RNCC: 3 | RNVC: 2

20 Apr 2020

3040-01-687-7375
Nonaircraft Mechanical Actuator

016877375
6646208-6: RNCC: 1 | RNVC: 2
S753300076-03: RNCC: 3 | RNVC: 2

15 Apr 2020

3040-01-687-6863
Housing Adapter

016876863
8603381: RNCC: 3 | RNVC: 2
8603381-D1419205: RNCC: 5 | RNVC: 2
7377688-52: RNCC: 5 | RNVC: 2

14 Apr 2020

3040-01-687-6679
Pneumatic Actuator Cylinder Housing

016876679
8590944: RNCC: 3 | RNVC: 2
8590944-D1418633: RNCC: 5 | RNVC: 1
D1418633: RNCC: 5 | RNVC: 1
7377688 ITEM 1: RNCC: 5 | RNVC: 2

13 Apr 2020

3040-01-687-6599
Nonaircraft Mechanical Actuator

016876599
MK2-SEI: RNCC: 3 | RNVC: 2
8324540/ SHEET 1 FIND NO 44ED: RNCC: 5 | RNVC: 2
MK2-SEIED: RNCC: 5 | RNVC: 2
8324540/ SHEET 1 FIND NO 44: RNCC: D | RNVC: 9

13 Apr 2020

3040-01-687-6331
Linear Actuating Cylinder

016876331
0.75 NSRY 4.00: RNCC: 3 | RNVC: 2
NCMB075-0400S: RNCC: 5 | RNVC: 2
SSR-12-4: RNCC: 5 | RNVC: 2
6669822: RNCC: 7 | RNVC: 2

10 Apr 2020

3040-01-687-6164
Rigid Connecting Link

016876164
405-12143-1: RNCC: 3 | RNVC: 2

9 Apr 2020

3040-01-687-5739
Counterbalance Weight Set

016875739
LG-STPD-20: RNCC: 3 | RNVC: 2
022902/SHEET 1 FIND 9: RNCC: 5 | RNVC: 2

8 Apr 2020

3040-01-687-5481
Nonaircraft Mechanical Actuator

016875481
160-500331-G002: RNCC: 1 | RNVC: 2
CC22599-001: RNCC: 3 | RNVC: 2

7 Apr 2020

3040-01-687-5190
Transmission Fluid Cooler

016875190
90046523: RNCC: 3 | RNVC: 2
2434.184.5000: RNCC: 5 | RNVC: 2

6 Apr 2020

3040-01-687-4919
Straight Shaft

016874919
4660.202.001.01: RNCC: 3 | RNVC: 9
466020200101: RNCC: 5 | RNVC: 2

3 Apr 2020

3040-01-687-4948
Linear Actuating Cylinder Piston

016874948
4661.272.020.01: RNCC: 3 | RNVC: 9
466127202001: RNCC: 5 | RNVC: 2

3 Apr 2020

3040-01-687-4645
Straight Shaft

016874645
129-7306: RNCC: 3 | RNVC: 2

2 Apr 2020

3040-01-687-4506
Mechanically Actuated Spindle

016874506
WK-871-133 REV-PC. 3: RNCC: 3 | RNVC: 2
WK-871-133: RNCC: D | RNVC: 9

2 Apr 2020

3040-01-687-3674
Shaft And Tube Support Assembly

016873674
407-062-509-101: RNCC: 3 | RNVC: 2

30 Mar 2020

3040-01-687-3362
Body Hub

016873362
697167350: RNCC: 3 | RNVC: 2
697167350: RNCC: 5 | RNVC: 2
697167350/ SHT 1: RNCC: 5 | RNVC: 9

27 Mar 2020

3040-01-687-3352
Body Hub

016873352
697167200: RNCC: 3 | RNVC: 2
697167200: RNCC: 5 | RNVC: 2
697167200/ SHT 1: RNCC: 5 | RNVC: 9

27 Mar 2020

3040-01-687-3357
Nonaircraft Mechanical Actuator

016873357
697167001: RNCC: 3 | RNVC: 2
697167001: RNCC: 5 | RNVC: 2

27 Mar 2020

3040-01-687-3339
Nonaircraft Mechanical Actuator

016873339
697167101: RNCC: 3 | RNVC: 2
697167101: RNCC: 5 | RNVC: 2
697167101/ SHT 1: RNCC: 5 | RNVC: 9

27 Mar 2020

3040-01-687-2589
Shouldered Shaft

016872589
3687977-1: RNCC: 3 | RNVC: 2
3687977: RNCC: D | RNVC: 9

25 Mar 2020

3040-01-687-2075
Mechanical Drive Housing

016872075
04156196: RNCC: 3 | RNVC: 2
AV6462-0-3: RNCC: 5 | RNVC: 2

23 Mar 2020

3040-01-687-1794
Rigid Connecting Link

016871794
258T5217-2: RNCC: 3 | RNVC: 2

23 Mar 2020

3040-01-687-1124
Rigid Connecting Link

016871124
258T5217-1: RNCC: 3 | RNVC: 2

18 Mar 2020

3040-01-686-9498
Single Disk Brake

016869498
13056255: RNCC: 3 | RNVC: 2

11 Mar 2020

3040-01-686-9476
Straight Shaft Assembly

016869476
13056256: RNCC: 3 | RNVC: 2

11 Mar 2020

3040-01-686-9422
Rigid Connecting Link

016869422
407-064-801-123: RNCC: 3 | RNVC: 2

11 Mar 2020

3040-01-686-8961
Shouldered Shaft

016868961
08003866: RNCC: 3 | RNVC: 2
PL08003875 FIND 18: RNCC: C | RNVC: 1
08003875/ SHT 1 FN 18: RNCC: D | RNVC: 9

10 Mar 2020

3040-01-686-8758
Rigid Connecting Link

016868758
444-001-001-117: RNCC: 3 | RNVC: 2
444-001-001-109: RNCC: 5 | RNVC: 9

9 Mar 2020

3040-01-686-7881
Rigid Connecting Link

016867881
407-030-601-105: RNCC: 3 | RNVC: 2

4 Mar 2020

3040-01-686-7830
Rigid Connecting Link

016867830
12619483: RNCC: 3 | RNVC: 2

4 Mar 2020

3040-01-686-7766
Manual Control Lever Assembly

016867766
12540782-7: RNCC: 3 | RNVC: 2

4 Mar 2020

3040-01-686-7726
Rigid Connecting Link

016867726
407-001-531-103: RNCC: 3 | RNVC: 2

4 Mar 2020

3040-01-686-7718
Rigid Connecting Link

016867718
206-001-556-001: RNCC: 3 | RNVC: 2

4 Mar 2020

3040-01-686-6707
Spur Gearshaft

016866707
83730-NAVY: RNCC: 3 | RNVC: 2
84846-DITEM17: RNCC: 5 | RNVC: 2

27 Feb 2020

3040-01-686-6539
Rigid Connecting Link

016866539
12589783: RNCC: 3 | RNVC: 2

27 Feb 2020

3040-01-686-6411
Remote Control Lever

016866411
6CE-44121-10-00: RNCC: 3 | RNVC: 2

26 Feb 2020

3040-01-686-6324
Remote Control Lever

016866324
6CE-44120-20-00: RNCC: 3 | RNVC: 2

26 Feb 2020

3040-01-686-5605
Control Cam

016865605
1824QRH-9: RNCC: 3 | RNVC: 2
1824QRH-001: RNCC: D | RNVC: 9

24 Feb 2020

3040-01-686-5590
Nonaircraft Mechanical Actuator

016865590
1824QRH-13: RNCC: 3 | RNVC: 2
1824QRH-001: RNCC: D | RNVC: 9

24 Feb 2020

3040-01-686-5250
Shouldered Shaft

016865250
310312028H: RNCC: 3 | RNVC: 2
310312028H: RNCC: 3 | RNVC: 9

20 Feb 2020

3040-01-686-5240
Linear Actuating Cylinder Piston Rod

016865240
585-6404854 FIND 4: RNCC: 3 | RNVC: 2
585-6404854: RNCC: D | RNVC: 9

20 Feb 2020

3040-01-686-5188
Bevel Gear And Shaft Assembly

016865188
12267843: RNCC: 3 | RNVC: 2

20 Feb 2020

3040-01-686-4254
Straight Shaft

016864254
00-316227: RNCC: 3 | RNVC: 2
PL-60190 ITEM 19: RNCC: D | RNVC: 9

13 Feb 2020

3040-01-686-4010
Shouldered Shaft

016864010
7410506-PN-12: RNCC: 3 | RNVC: 2
7410504-PN-9: RNCC: C | RNVC: 1
B434-5219-PN-12: RNCC: C | RNVC: 1
B434-5217-PN-9: RNCC: C | RNVC: 1
7410504: RNCC: D | RNVC: 9
7410506: RNCC: D | RNVC: 9

12 Feb 2020

3040-01-686-3250
Control Cam

016863250
6CE-44150-10-00: RNCC: 3 | RNVC: 2

7 Feb 2020

3040-01-686-3119
Counterbalance Weight

016863119
BPU-612-6-17: RNCC: 3 | RNVC: 2

7 Feb 2020

3040-01-686-3013
Rigid Connecting Link

016863013
4359898: RNCC: 3 | RNVC: 2

7 Feb 2020

3040-01-686-3012
Rigid Connecting Link

016863012
4359899: RNCC: 3 | RNVC: 2

7 Feb 2020

3040-01-686-3011
Rigid Connecting Link

016863011
4359895: RNCC: 3 | RNVC: 2

7 Feb 2020

3040-01-686-3009
Rigid Connecting Link

016863009
4359894: RNCC: 3 | RNVC: 2

7 Feb 2020

3040-01-686-3015
Remote Control Lever

016863015
4359907: RNCC: 3 | RNVC: 2

7 Feb 2020

3040-01-686-2942
Rigid Connecting Link

016862942
BPU-612-6-21: RNCC: 3 | RNVC: 2

6 Feb 2020

3040-01-686-1913
Shouldered Shaft

016861913
407-040-322-105: RNCC: 3 | RNVC: 2

4 Feb 2020

3040-01-686-1773
Control Cam

016861773
845-8541973-ITEM NO-15: RNCC: 3 | RNVC: 2
2640-809X24-IT-20: RNCC: 5 | RNVC: 1
2644-824-32-ITEM NO-15: RNCC: 5 | RNVC: 1
845-8541973: RNCC: D | RNVC: 9

3 Feb 2020

3040-01-686-1023
Body Hub

016861023
461458: RNCC: 3 | RNVC: 2

30 Jan 2020

3040-01-686-0761
Straight Shaft

016860761
2215B-018-12LH: RNCC: 3 | RNVC: 2

29 Jan 2020

3040-01-686-0760
Straight Shaft

016860760
2215B-018-11LH: RNCC: 3 | RNVC: 2

29 Jan 2020

3040-01-686-0759
Straight Shaft

016860759
2215B-018-07LH: RNCC: 3 | RNVC: 2

29 Jan 2020

3040-01-686-0428
Counterbalance Weight

016860428
206-011-157-107: RNCC: 3 | RNVC: 2

28 Jan 2020

3040-01-686-0404
Shouldered Shaft

016860404
BPU-612-6-4: RNCC: 3 | RNVC: 2

28 Jan 2020

3040-01-686-0118
Manual Control Lever

016860118
521211: RNCC: 3 | RNVC: 2

27 Jan 2020

3040-01-686-0073
Body Hub

016860073
68514411087: RNCC: 3 | RNVC: 2

27 Jan 2020

3040-01-685-9876
Mechanical Drive Housing

016859876
70351-38110-049: RNCC: 3 | RNVC: 2
70351-38110: RNCC: D | RNVC: 9

24 Jan 2020

3040-01-685-9784
Linear Actuating Cylinder Cap

016859784
3491AS0726-1: RNCC: 3 | RNVC: 2
3491AS0726: RNCC: D | RNVC: 9

24 Jan 2020

3040-01-685-8516
Shouldered Shaft

016858516
12542360: RNCC: 3 | RNVC: 2

16 Jan 2020

3040-01-685-8358
Rigid Connecting Link

016858358
167-7563785 PC NO 179: RNCC: 3 | RNVC: 2
SP002043 PC NO 56: RNCC: 5 | RNVC: 2
167-7563785: RNCC: D | RNVC: 9

15 Jan 2020

3040-01-685-8308
Linear Actuating Cylinder Cap

016858308
3491AS0717-2: RNCC: 3 | RNVC: 2

15 Jan 2020

3040-01-685-8244
Rigid Connecting Link

016858244
4354570: RNCC: 3 | RNVC: 2

15 Jan 2020

3040-01-685-6937
Rigid Connecting Link

016856937
167-7563785 PC NO 174: RNCC: 3 | RNVC: 2
SP002043 PC NO 66: RNCC: 5 | RNVC: 2
SP002043: RNCC: D | RNVC: 9

8 Jan 2020

3040-01-685-6929
Rigid Connecting Link

016856929
167-7563785 PC NO 85: RNCC: 3 | RNVC: 2
SP002043 PC NO 85: RNCC: 5 | RNVC: 2
SP002043: RNCC: D | RNVC: 9

8 Jan 2020

3040-01-685-6795
Shaft-Hub Clamp-Bushing Assembly

016856795
251T4378-4: RNCC: 3 | RNVC: 2

7 Jan 2020

3040-01-685-6604
Housing Adapter

016856604
2M0407: RNCC: 3 | RNVC: 2

7 Jan 2020

3040-01-685-6361
Spur Gearshaft

016856361
71320368-001: RNCC: 3 | RNVC: 2
71320368: RNCC: D | RNVC: 9

3 Jan 2020

3040-01-685-5915
Rigid Connecting Link

016855915
65302-12544-042: RNCC: 3 | RNVC: 2

31 Dec 2019

3040-01-685-5776
Rigid Connecting Link

016855776
2ASH11902-0003: RNCC: 3 | RNVC: 2

30 Dec 2019

3040-01-685-5699
Rigid Connecting Link

016855699
167-7563785 PC. NO 175: RNCC: 3 | RNVC: 2
SP002043 PC NO 44: RNCC: 5 | RNVC: 2
167-7563785: RNCC: D | RNVC: 9

30 Dec 2019

3040-01-685-5235
Spur Gearshaft

016855235
71320368-003: RNCC: 3 | RNVC: 2
71320368: RNCC: D | RNVC: 9

20 Dec 2019

3040-01-685-4690
Rigid Connecting Link

016854690
1001526: RNCC: 3 | RNVC: 2

18 Dec 2019

3040-01-685-4270
Shouldered Shaft

016854270
206-076-419-101: RNCC: 3 | RNVC: 2

17 Dec 2019

3040-01-685-4062
Pivot Shaft Assembly

016854062
300776WE: RNCC: 3 | RNVC: 9
12556014: RNCC: 7 | RNVC: 2

16 Dec 2019

3040-01-685-3814
Gearbox Parts Kit

016853814
5400-5-999-000: RNCC: 3 | RNVC: 2
E0500 REV M ITEM NO. 4: RNCC: C | RNVC: 1
E0500: RNCC: D | RNVC: 9

13 Dec 2019

3040-01-685-2771
Rigid Connecting Link

016852771
BPU-612-6-30: RNCC: 3 | RNVC: 2

10 Dec 2019

3040-01-685-2765
Rigid Connecting Link

016852765
BPU-612-6-29: RNCC: 3 | RNVC: 2

10 Dec 2019

3040-01-685-1909
Rotating Shaft Eye Bracket

016851909
12620705: RNCC: 3 | RNVC: 2

5 Dec 2019

3040-01-685-1738
Linear Actuating Cylinder Piston

016851738
721-8541924-2: RNCC: 3 | RNVC: 2
R8611506-2: RNCC: 5 | RNVC: 2
721-8541924: RNCC: D | RNVC: 9

4 Dec 2019

3040-01-685-1664
Linear Actuating Cylinder Piston Rod

016851664
721-8541924-9: RNCC: 3 | RNVC: 2
R8611506-9: RNCC: 5 | RNVC: 2
721-8541924: RNCC: D | RNVC: 9

4 Dec 2019

3040-01-685-1551
Rigid Connecting Link

016851551
141T6171-5: RNCC: 3 | RNVC: 2

3 Dec 2019

3040-01-685-1367
Shouldered Shaft Assembly

016851367
12620745: RNCC: 3 | RNVC: 2

3 Dec 2019

3040-01-685-0924
Counterbalance Weight

016850924
G301002010-1: RNCC: 3 | RNVC: 2

29 Nov 2019

3040-01-685-0577
Linear Actuating Cylinder Cap

016850577
G106001335-1: RNCC: 3 | RNVC: 2
G106001335-1: RNCC: 5 | RNVC: 9
G106001335: RNCC: D | RNVC: 9

26 Nov 2019

3040-01-684-9630
Shouldered Shaft

016849630
8598060-001: RNCC: 3 | RNVC: 1

21 Nov 2019

3040-01-684-9557
Straight Shaft

016849557
4940547: RNCC: 3 | RNVC: 2

21 Nov 2019

3040-01-684-9556
Rotary Actuating Cylinder Assembly

016849556
936540: RNCC: 1 | RNVC: 2
121662B: RNCC: 3 | RNVC: 2

21 Nov 2019

3040-01-684-9508
Straight Shaft

016849508
3943740: RNCC: 3 | RNVC: 2

21 Nov 2019

3040-01-684-9293
Nonaircraft Mechanical Actuator

016849293
312005-1-K: RNCC: 3 | RNVC: 2
312005: RNCC: D | RNVC: 9

20 Nov 2019

3040-01-684-9262
Worm Shaft

016849262
301310-4: RNCC: 3 | RNVC: 2
312005 ITEM NO 2: RNCC: D | RNVC: 9

20 Nov 2019

3040-01-684-9243
Flexible Shaft Assembly Casing

016849243
8598108 ITEM 14: RNCC: 3 | RNVC: 1
8598108 ITEM 14D4: RNCC: 5 | RNVC: 2
C187SS-316D4: RNCC: 5 | RNVC: 2
C187SS-316: RNCC: 5 | RNVC: 2

20 Nov 2019

3040-01-684-9107
Linear Actuating Cylinder Assembly

016849107
8599175-001: RNCC: 3 | RNVC: 1

20 Nov 2019

3040-01-684-8874
Rigid Connecting Link

016848874
8599987-001: RNCC: 3 | RNVC: 2
8599987: RNCC: D | RNVC: 9

19 Nov 2019

3040-01-684-8870
Shouldered Shaft

016848870
501-6600042-ITEM 371: RNCC: 3 | RNVC: 2
501-5923259-ITEM 371: RNCC: 3 | RNVC: 2
6503-158-ITEM 371: RNCC: 5 | RNVC: 1
6503-188-ITEM 371: RNCC: 5 | RNVC: 1
501-6600042: RNCC: D | RNVC: 9
501-5923259: RNCC: D | RNVC: 9

19 Nov 2019

3040-01-684-8720
Linear Actuating Cylinder Assembly

016848720
937850: RNCC: 3 | RNVC: 2

19 Nov 2019

3040-01-684-8340
Remote Control Lever

016848340
8599982-001: RNCC: 3 | RNVC: 2
8599982: RNCC: D | RNVC: 9

18 Nov 2019

3040-01-684-8341
Rigid Connecting Link

016848341
8599988-001: RNCC: 3 | RNVC: 2
8599988: RNCC: D | RNVC: 9

18 Nov 2019

3040-01-684-7635
Linear Actuating Cylinder Assembly

016847635
8599176-001: RNCC: 3 | RNVC: 1

15 Nov 2019

3040-01-684-7608
Manual Control Lever Assembly

016847608
252T3118-2: RNCC: 3 | RNVC: 2

15 Nov 2019

3040-01-684-7592
Straight Shaft

016847592
251T4368-1: RNCC: 3 | RNVC: 2

15 Nov 2019

3040-01-684-7419
Linear Actuating Cylinder Assembly

016847419
8599177-001: RNCC: 3 | RNVC: 1

14 Nov 2019

3040-01-684-6772
Rigid Connecting Link

016846772
143T6433-4: RNCC: 3 | RNVC: 2

12 Nov 2019

3040-01-684-6770
Rigid Connecting Link

016846770
143T6433-5: RNCC: 3 | RNVC: 2

12 Nov 2019

3040-01-684-6768
Rigid Connecting Link

016846768
143T6469-1: RNCC: 3 | RNVC: 2

12 Nov 2019

3040-01-684-6696
Straight Shaft

016846696
8597812-001: RNCC: 3 | RNVC: 2
8597812: RNCC: D | RNVC: 9

12 Nov 2019

3040-01-684-6307
Rigid Connecting Link

016846307
8596406-001: RNCC: 3 | RNVC: 2
8596406: RNCC: D | RNVC: 9

8 Nov 2019

3040-01-684-5866
Electrical-Fluid Pressure Connector Assembly

016845866
8308455-1: RNCC: 1 | RNVC: 2
100425-09: RNCC: 3 | RNVC: 2
8308455: RNCC: D | RNVC: 9

7 Nov 2019

3040-01-684-5737
Rigid Connecting Link

016845737
12628159-4: RNCC: 3 | RNVC: 2
12628159: RNCC: D | RNVC: 9

7 Nov 2019

3040-01-684-5736
Rigid Connecting Link

016845736
12628159-3: RNCC: 3 | RNVC: 2
12628159: RNCC: D | RNVC: 9

7 Nov 2019

3040-01-684-5735
Rigid Connecting Link

016845735
12628159-2: RNCC: 3 | RNVC: 2
12628159: RNCC: D | RNVC: 9

7 Nov 2019

3040-01-684-5729
Manual Control Lever

016845729
000-91045-0000: RNCC: 3 | RNVC: 2

6 Nov 2019

3040-01-684-5700
Straight Shaft

016845700
8596355-001: RNCC: 3 | RNVC: 2

6 Nov 2019

3040-01-684-5351
Rigid Connecting Link

016845351
8596405-001: RNCC: 3 | RNVC: 2

6 Nov 2019

3040-01-684-5237
Rigid Connecting Link

016845237
143T6616-1: RNCC: 3 | RNVC: 2

6 Nov 2019

3040-01-684-5225
Rigid Connecting Link

016845225
146T6749-3: RNCC: 3 | RNVC: 2

6 Nov 2019

3040-01-684-5217
Rigid Connecting Link

016845217
113T1307-47: RNCC: 3 | RNVC: 2

6 Nov 2019

3040-01-684-4891
Mechanical Drive Housing

016844891
775208: RNCC: 3 | RNVC: 2

5 Nov 2019

3040-01-684-4887
Spur Gearshaft

016844887
775219: RNCC: 3 | RNVC: 2

5 Nov 2019

3040-01-684-4376
Rigid Connecting Link

016844376
143T6455-8: RNCC: 3 | RNVC: 2

2 Nov 2019

3040-01-684-4361
Rigid Connecting Link

016844361
146T6749-1: RNCC: 3 | RNVC: 2

2 Nov 2019

3040-01-684-4299
Piston Rod Guide

016844299
6916022-2: RNCC: 3 | RNVC: 2
6916022: RNCC: D | RNVC: 9

1 Nov 2019

3040-01-684-4292
Piston Rod Guide

016844292
6916022-1: RNCC: 3 | RNVC: 2
6916022: RNCC: D | RNVC: 9

1 Nov 2019

3040-01-684-4063
Rigid Connecting Link

016844063
146T6717-1: RNCC: 3 | RNVC: 2

1 Nov 2019

3040-01-684-3751
Rigid Connecting Link

016843751
251T3745-1: RNCC: 3 | RNVC: 2

31 Oct 2019

3040-01-684-3121
Straight Shaft

016843121
8597833-001: RNCC: 3 | RNVC: 1

29 Oct 2019

3040-01-684-3057
Detent Plate

016843057
4359965: RNCC: 3 | RNVC: 2

29 Oct 2019

3040-01-684-3036
Nonrotating Shaft Eye Bracket

016843036
4359927: RNCC: 3 | RNVC: 2

29 Oct 2019

3040-01-684-2846
Mechanical Drive Housing

016842846
41117-ZZ3-000: RNCC: 3 | RNVC: 9

28 Oct 2019

3040-01-684-2648
Hydraulic Control Assembly

016842648
6931010-1: RNCC: 3 | RNVC: 2
6931010: RNCC: D | RNVC: 9

28 Oct 2019

3040-01-684-2645
Hydraulic Control Assembly

016842645
6931010-48: RNCC: 3 | RNVC: 2

28 Oct 2019

3040-01-684-2188
Breather

016842188
936336: RNCC: 3 | RNVC: 2

25 Oct 2019

3040-01-684-2069
Straight Shaft

016842069
936578: RNCC: 3 | RNVC: 2

25 Oct 2019

3040-01-684-1652
Rigid Connecting Link

016841652
253T5728-3: RNCC: 3 | RNVC: 2

23 Oct 2019

3040-01-684-1642
Rigid Connecting Link

016841642
140T2997-1: RNCC: 3 | RNVC: 2

23 Oct 2019

3040-01-684-1422
Pawl

016841422
251T4391-1: RNCC: 3 | RNVC: 2

23 Oct 2019

3040-01-684-1418
Pawl

016841418
251T4355-1: RNCC: 3 | RNVC: 2

23 Oct 2019

3040-01-684-1105
Control Cam

016841105
252T3140-2: RNCC: 3 | RNVC: 2

21 Oct 2019

3040-01-684-1103
Control Cam

016841103
252T3140-1: RNCC: 3 | RNVC: 2

21 Oct 2019

3040-01-684-1012
Linear Actuating Cylinder Assembly

016841012
990009-062: RNCC: 3 | RNVC: 9
NP-623PC6(MOD): RNCC: 5 | RNVC: 9
NP711-2(MOD): RNCC: 5 | RNVC: 9

21 Oct 2019

3040-01-684-1004
Linear Actuating Cylinder Assembly

016841004
990002-606: RNCC: 3 | RNVC: 9
NP-623PC5(MOD): RNCC: 5 | RNVC: 9
NP711-1(MOD): RNCC: 5 | RNVC: 9

21 Oct 2019

3040-01-684-0828
Rigid Connecting Link

016840828
P3A3570: RNCC: 3 | RNVC: 2
S11A3W102-210: RNCC: 7 | RNVC: 2

19 Oct 2019

3040-01-684-0819
Rigid Connecting Link

016840819
113T1330-4: RNCC: 3 | RNVC: 2

19 Oct 2019

3040-01-684-0820
Rigid Connecting Link

016840820
113T1330-3: RNCC: 3 | RNVC: 2

19 Oct 2019

3040-01-684-0808
Straight Shaft

016840808
251T4369-1: RNCC: 3 | RNVC: 2

19 Oct 2019

3040-01-684-0071
Control Cable Assembly

016840071
CCX3305: RNCC: 3 | RNVC: 2

17 Oct 2019

3040-01-684-0067
Manual Control Lever

016840067
0937-11Z: RNCC: 3 | RNVC: 2

17 Oct 2019

3040-01-683-9650
Nonaircraft Mechanical Actuator

016839650
7A40256: RNCC: 3 | RNVC: 2

16 Oct 2019

3040-01-683-9515
Rigid Connecting Link

016839515
251T1644-2: RNCC: 3 | RNVC: 2

15 Oct 2019

3040-01-683-9503
Rigid Connecting Link

016839503
251T1646-2: RNCC: 3 | RNVC: 2

15 Oct 2019

3040-01-683-9273
Rigid Connecting Link

016839273
941100: RNCC: 3 | RNVC: 2

15 Oct 2019

3040-01-683-8630
Rigid Connecting Link

016838630
4359904: RNCC: 3 | RNVC: 2

10 Oct 2019

3040-01-683-8533
Rigid Connecting Link

016838533
113T1335-9: RNCC: 3 | RNVC: 2

9 Oct 2019

3040-01-683-8545
Rigid Connecting Link

016838545
114T0115-1: RNCC: 3 | RNVC: 2

9 Oct 2019

3040-01-683-8543
Rigid Connecting Link

016838543
251T0100Y1417: RNCC: 3 | RNVC: 1
251T0100-1417: RNCC: C | RNVC: 1

9 Oct 2019

3040-01-683-8388
Counterbalance Weight

016838388
138676-101: RNCC: 3 | RNVC: 2

9 Oct 2019

3040-01-683-8337
Counterbalance Weight

016838337
138232-101: RNCC: 3 | RNVC: 2

9 Oct 2019

3040-01-683-8301
Counterbalance Weight

016838301
138678-102: RNCC: 3 | RNVC: 2

9 Oct 2019

3040-01-683-8149
Counterbalance Weight

016838149
138665-101: RNCC: 3 | RNVC: 2

8 Oct 2019

3040-01-683-8094
Counterbalance Weight

016838094
137967-101: RNCC: 3 | RNVC: 2

8 Oct 2019

3040-01-683-8083
Rigid Connecting Link

016838083
113-6398538PART133: RNCC: 3 | RNVC: 1
113-4362799PART133: RNCC: D | RNVC: 9

8 Oct 2019

3040-01-683-8079
Counterbalance Weight

016838079
138234-101: RNCC: 3 | RNVC: 2

8 Oct 2019

3040-01-683-8021
Rigid Connecting Link

016838021
113-6398538PART113: RNCC: 3 | RNVC: 1
113-4362799PART113: RNCC: D | RNVC: 9

8 Oct 2019

3040-01-683-7989
Counterbalance Weight

016837989
138667-2: RNCC: 3 | RNVC: 2

8 Oct 2019

3040-01-683-7771
Nonaircraft Mechanical Actuator

016837771
7A40718: RNCC: 3 | RNVC: 2
7A40254 FIND NO. 17: RNCC: C | RNVC: 1
7A40254: RNCC: D | RNVC: 9

7 Oct 2019

3040-01-683-7767
Nonaircraft Mechanical Actuator

016837767
7A40714: RNCC: 3 | RNVC: 2
7A40254 FIND NO. 15: RNCC: C | RNVC: 1
7A40254: RNCC: D | RNVC: 9

7 Oct 2019

3040-01-683-7365
Mechanically Actuated Spindle

016837365
167-6926162 PC NO. 142: RNCC: 3 | RNVC: 2
SP002050 REV A PC NO. 11: RNCC: D | RNVC: 9
6926162: RNCC: D | RNVC: 9

4 Oct 2019

3040-01-683-7200
Hydraulic Accumulator Cylinder

016837200
ACP10AA150E1KTD: RNCC: 3 | RNVC: 2
11295-02ITEM270: RNCC: D | RNVC: 9

3 Oct 2019

3040-01-683-6286
Straight Shaft

016836286
936581: RNCC: 3 | RNVC: 2

1 Oct 2019

3040-01-683-6268
Shaft Collar

016836268
936157: RNCC: 3 | RNVC: 2

1 Oct 2019

3040-01-683-6279
Shouldered Shaft Assembly

016836279
936576: RNCC: 3 | RNVC: 2

1 Oct 2019

3040-01-683-6276
Shouldered Shaft Assembly

016836276
936579: RNCC: 3 | RNVC: 2

1 Oct 2019

3040-01-683-6270
Shaft Collar

016836270
936156: RNCC: 3 | RNVC: 2

1 Oct 2019

3040-01-683-5367
Manual Control Lever

016835367
509E815AA: RNCC: 3 | RNVC: 9

26 Sep 2019

3040-01-683-5329
Rigid Connecting Link

016835329
165A831AAPC1: RNCC: 3 | RNVC: 9
PL-509E818AAPC18: RNCC: 5 | RNVC: 1

26 Sep 2019

3040-01-683-5323
Rigid Connecting Link

016835323
165A830AAPC1: RNCC: 3 | RNVC: 9
PL-509E818AAPC21: RNCC: 5 | RNVC: 1

26 Sep 2019

3040-01-683-5187
Rigid Connecting Link

016835187
8599974-001: RNCC: 3 | RNVC: 2

25 Sep 2019

3040-01-683-5163
Rigid Connecting Link

016835163
8599973-001: RNCC: 3 | RNVC: 2

25 Sep 2019

3040-01-683-5148
Manual Control Lever

016835148
165A818AXPC1: RNCC: 3 | RNVC: 9

25 Sep 2019

3040-01-683-5141
Rigid Connecting Link

016835141
134B809AA: RNCC: 3 | RNVC: 9

25 Sep 2019

3040-01-683-5136
Manual Control Lever Assembly

016835136
134B305ABPC1: RNCC: 3 | RNVC: 9

25 Sep 2019

3040-01-683-5056
Rigid Connecting Link

016835056
128C808AA: RNCC: 3 | RNVC: 9

25 Sep 2019

3040-01-683-5029
Manual Control Lever Assembly

016835029
125D586CF: RNCC: 3 | RNVC: 9

25 Sep 2019

3040-01-683-4802
Remote Control Lever

016834802
8600047-001: RNCC: 3 | RNVC: 2

24 Sep 2019

3040-01-683-4008
Remote Control Lever

016834008
8599981-001: RNCC: 3 | RNVC: 2
8599981: RNCC: D | RNVC: 9

20 Sep 2019

3040-01-683-3969
Rigid Connecting Link

016833969
8600054-001: RNCC: 3 | RNVC: 2

20 Sep 2019

3040-01-683-3741
Rigid Connecting Link

016833741
8600111-001: RNCC: 3 | RNVC: 2

19 Sep 2019

3040-01-683-2655
Straight Shaft

016832655
8599976-001: RNCC: 3 | RNVC: 2

16 Sep 2019

3040-01-683-2576
Rigid Connecting Link

016832576
8600041-001: RNCC: 3 | RNVC: 2
8600041: RNCC: D | RNVC: 9

16 Sep 2019

3040-01-683-2502
Shouldered Shaft

016832502
8599997-001: RNCC: 3 | RNVC: 2
8599997: RNCC: D | RNVC: 9

16 Sep 2019

3040-01-683-2290
Control Cable Assembly

016832290
8600018-001: RNCC: 1 | RNVC: 2
315ECX-MTT-4-270: RNCC: 3 | RNVC: 2

13 Sep 2019

3040-01-683-2191
Extension Shaft

016832191
8217181-17: RNCC: 3 | RNVC: 2
H434-0241-17: RNCC: C | RNVC: 1
8217181: RNCC: D | RNVC: 9

13 Sep 2019

3040-01-683-2036
Shouldered Shaft

016832036
112053: RNCC: 3 | RNVC: 2
112053: RNCC: 5 | RNVC: 2

12 Sep 2019

3040-01-682-9363
Piston Ring

016829363
X-011621: RNCC: 3 | RNVC: 2

29 Aug 2019

3040-01-682-9323
Rigid Connecting Link

016829323
803-6397268 REV B PC NO. 79: RNCC: 3 | RNVC: 2
803-6397269 REV B PC NO. 53: RNCC: 3 | RNVC: 2
803-6397269: RNCC: D | RNVC: 9
803-6397268: RNCC: D | RNVC: 9

29 Aug 2019

3040-01-682-9139
Nonaircraft Mechanical Actuator

016829139
136033: RNCC: 3 | RNVC: 2

28 Aug 2019

3040-01-682-8907
Rigid Connecting Link

016828907
803-6397269 ASSY K-2: RNCC: 3 | RNVC: 2
803-6397268 REV B PC NO. 175: RNCC: 3 | RNVC: 2
803-6397268: RNCC: D | RNVC: 9
803-6397269: RNCC: D | RNVC: 9

28 Aug 2019

3040-01-682-8733
Ball Joint

016828733
3950-6: RNCC: 3 | RNVC: 2

27 Aug 2019

3040-01-682-8670
Mechanically Actuated Spindle

016828670
0407350: RNCC: 3 | RNVC: 2

27 Aug 2019

3040-01-682-7819
Straight Shaft

016827819
J213504: RNCC: 3 | RNVC: 2

23 Aug 2019

3040-01-682-7633
Lock Cylinder Drive

016827633
6878806-1: RNCC: 3 | RNVC: 2

23 Aug 2019

3040-01-682-7634
Lock Cylinder Idler

016827634
6878806-2: RNCC: 3 | RNVC: 2
6878806-2: RNCC: 3 | RNVC: 2

23 Aug 2019

3040-01-682-7479
Rigid Connecting Link

016827479
1000AG2083-1: RNCC: 3 | RNVC: 2

22 Aug 2019

3040-01-682-7475
Shaft-Hub Clamp-Bushing Assembly

016827475
3612-2: RNCC: 3 | RNVC: 2

22 Aug 2019

3040-01-682-7477
Ball Joint

016827477
3950-7: RNCC: 3 | RNVC: 2

22 Aug 2019

3040-01-682-7440
Shouldered Shaft

016827440
7662319-95: RNCC: 3 | RNVC: 2
7662319-95: RNCC: 3 | RNVC: 2
7662319 FIND NO 14: RNCC: C | RNVC: 1
7662319: RNCC: D | RNVC: 9

22 Aug 2019

3040-01-682-7126
Shouldered Shaft

016827126
G105001721-501: RNCC: 3 | RNVC: 2

20 Aug 2019

3040-01-682-7035
Hub Clamp

016827035
7662319-94: RNCC: 3 | RNVC: 2
7662319-94: RNCC: 3 | RNVC: 2
7662319 FIND NO 15: RNCC: C | RNVC: 1
7662319: RNCC: D | RNVC: 9

20 Aug 2019

Load More Results