What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 159 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 159 of 300

3040-01-513-8342
Spur Gearshaft

015138342
C310132196: RNCC: 3 | RNVC: 2

7 Oct 2003

3040-01-522-2149
Pneumatic Actuator Cylinder Housing

015222149
99C621-06-DWG-01-A-0: RNCC: 3 | RNVC: 2
HI-721-6000 REV G ITEM 7: RNCC: 5 | RNVC: 1

22 Jul 2004

3040-01-534-3716
Linear Actuating Cylinder Assembly

015343716
1139838: RNCC: 3 | RNVC: 2

19 Oct 2005

3040-01-514-9178
Brake Backing Plate

015149178
5-42-7117-00-08: RNCC: 3 | RNVC: 2
5-42-7117-00: RNCC: 5 | RNVC: 9

10 Nov 2003

3040-01-522-0860
Pressure Regulator Shaft And Spring Assembly

015220860
14-14.32-36.25-ME-ME-243LBS: RNCC: 3 | RNVC: 2
15936000 P/N 1593600-2: RNCC: 5 | RNVC: 2
15931300 FIND NO. 22: RNCC: 5 | RNVC: 2
15936000-2: RNCC: 5 | RNVC: 2
15931300 FIND NO. 22: RNCC: 5 | RNVC: 9
15936000-2: RNCC: 5 | RNVC: 9
15936000 P/N 1593600-2: RNCC: 5 | RNVC: 9

19 Jul 2004

3040-01-543-5723
Nonaircraft Mechanical Actuator

015435723
2239699: RNCC: 3 | RNVC: 2

15 Sep 2006

3040-01-510-5245
Shouldered Shaft

015105245
A107686-101-11: RNCC: 3 | RNVC: 2
A107686-101-11: RNCC: 3 | RNVC: 9
A109087-102-11 ITEM 2: RNCC: 5 | RNVC: 9
A107686-101-11: RNCC: 5 | RNVC: 9
A109087-102-11 ITEM 2: RNCC: C | RNVC: 1
A107686-101-11: RNCC: C | RNVC: 1

22 Jul 2003

3040-01-539-2405
Rigid Connecting Link

015392405
F-WK-871-4 PC 134: RNCC: 3 | RNVC: 2

14 Apr 2006

3040-01-548-2117
Nonaircraft Mechanical Actuator

015482117
408693-006: RNCC: 3 | RNVC: 2

13 Feb 2007

3040-01-510-0928
Manual Control Lever

015100928
179384: RNCC: 3 | RNVC: 2
20735F001 REV E FIND NO. 23: RNCC: 5 | RNVC: 2
20735F024: RNCC: 5 | RNVC: 2
20735F001: RNCC: D | RNVC: 9

14 Jul 2003

3040-01-513-8341
Spur Gearshaft

015138341
C310132194: RNCC: 3 | RNVC: 2

7 Oct 2003

3040-01-515-7207
Linear Actuating Cylinder

015157207
R433008095: RNCC: 3 | RNVC: 2
C193915 REV B: RNCC: 5 | RNVC: 2
173735: RNCC: 5 | RNVC: 2
C193915: RNCC: 5 | RNVC: 9

5 Dec 2003

3040-01-525-1896
Piston Rod Ring

015251896
0634402105: RNCC: 3 | RNVC: 2

30 Oct 2004

3040-01-538-8519
Worm Wheel Gearshaft

015388519
F-WK-871-4 PC 126: RNCC: 3 | RNVC: 2

3 Apr 2006

3040-01-548-2118
Control Pedal

015482118
000092-25: RNCC: 3 | RNVC: 2

13 Feb 2007

3040-01-548-9989
Linear Actuating Cylinder

015489989
87711763: RNCC: 3 | RNVC: 2
87417644: RNCC: 5 | RNVC: 9

8 Mar 2007

3040-01-520-6754
Shaft Collar

015206754
064-47770C000: RNCC: 3 | RNVC: 2
364-48430-000 ITEM 43: RNCC: 5 | RNVC: 2

21 May 2004

3040-01-542-3851
Shouldered Shaft

015423851
11581394: RNCC: 3 | RNVC: 2

3 Aug 2006

3040-01-510-0507
Engine Gear

015100507
R132267: RNCC: 3 | RNVC: 2
R132267: RNCC: 5 | RNVC: 2
R132267: RNCC: 5 | RNVC: 2
R132267: RNCC: 5 | RNVC: 9

11 Jul 2003

3040-01-522-9496
Differential Gear Unit

015229496
301044-2: RNCC: 3 | RNVC: 2
301044-2: RNCC: 3 | RNVC: 9
SE221N SHT2, 308007 FN-4: RNCC: 5 | RNVC: 2
SE221N SHT2, 308007 FN-4: RNCC: 5 | RNVC: 9

14 Aug 2004

3040-01-523-7736
Linear Actuating Cylinder Assembly

015237736
N5C8.00X28.00-N-4.5-2-F-F-X-1-1: RNCC: 3 | RNVC: 2
15866010 REV E ITEM NO. 1: RNCC: 5 | RNVC: 2
15866010 REV E ITEM NO. 1: RNCC: 5 | RNVC: 9

15 Sep 2004

3040-01-526-8976
Body Hub

015268976
291635: RNCC: 3 | RNVC: 2

12 Jan 2005

3040-01-538-0959
Shouldered Shaft

015380959
513017-1: RNCC: 3 | RNVC: 2

10 Mar 2006

3040-01-542-3854
Rigid Connecting Link

015423854
11580763: RNCC: 3 | RNVC: 2

3 Aug 2006

3040-01-520-3187
Flexible Drive Shaft

015203187
2102201 SH 43 ITEM NO 1: RNCC: 3 | RNVC: 2
1605740-0156: RNCC: 5 | RNVC: 2

7 May 2004

3040-01-538-8524
Shouldered Shaft

015388524
F-WK-871-4 PC 103: RNCC: 3 | RNVC: 2

3 Apr 2006

3040-01-541-1178
Linear Actuating Cylinder Assembly

015411178
11B256006: RNCC: 3 | RNVC: 2
AH 712 AAZN: RNCC: 5 | RNVC: 2

15 Jun 2006

3040-01-553-8162
Aircra Planet Shaft

015538162
188877-1: RNCC: 3 | RNVC: 2

26 Jul 2007

3040-01-476-6933
Rigid Connecting Link

014766933
6521-129: RNCC: 3 | RNVC: 2
74B428009-129: RNCC: 5 | RNVC: 2
74B428009-129: RNCC: 7 | RNVC: 2

20 Jul 2000

3040-01-479-8289
Shouldered Shaft

014798289
751-6402304-1: RNCC: 3 | RNVC: 2
211069050: RNCC: 5 | RNVC: 2
A06481.123.132: RNCC: C | RNVC: 1
751-6402302 FIND 45: RNCC: C | RNVC: 1
751-6402304 ITEM 1: RNCC: C | RNVC: 1
751-6402301 ITEM 45: RNCC: C | RNVC: 1

31 Oct 2000

3040-01-491-8337
Shouldered Shaft

014918337
H643-7003-68: RNCC: 3 | RNVC: 2
342-7067322-68: RNCC: 5 | RNVC: 2
H643-7003: RNCC: D | RNVC: 9
7067322: RNCC: D | RNVC: 9

1 Nov 2001

3040-01-501-0206
Shaft Collar

015010206
SP-10-SS: RNCC: 3 | RNVC: 2
H832-1691-14: RNCC: 5 | RNVC: 2
752-7068513-14: RNCC: 5 | RNVC: 2
7068513: RNCC: D | RNVC: 9

20 Sep 2002

3040-01-504-6968
Rigid Connecting Link

015046968
300-30132-01: RNCC: 3 | RNVC: 2
0-001-110-01 FIND NO 75: RNCC: 5 | RNVC: 2
0-101-310-02: RNCC: 5 | RNVC: 9
0-101-310-02: RNCC: 5 | RNVC: 9
0-001-110-01: RNCC: D | RNVC: 9

6 Feb 2003

3040-01-505-1611
Manual Control Lever

015051611
7D3-08353: RNCC: 3 | RNVC: 2
7D3-08346 ITEM NO 2: RNCC: 5 | RNVC: 2
7D3-08346: RNCC: D | RNVC: 9

25 Feb 2003

3040-01-473-3974
Shouldered Shaft

014733974
18-7225: RNCC: 3 | RNVC: 2

6 Apr 2000

3040-01-470-1334
Shaft Collar

014701334
124-4322615 PC 13: RNCC: 3 | RNVC: 2
4322615: RNCC: D | RNVC: 9

8 Dec 1999

3040-01-478-8316
Rigid Connecting Link

014788316
74A671213-2003: RNCC: 3 | RNVC: 2

28 Sep 2000

3040-01-478-9652
Mechanically Actuated Spindle

014789652
74A400720-1003: RNCC: 3 | RNVC: 2
74A400720-1003: RNCC: 5 | RNVC: 9
74A400720-1003: RNCC: C | RNVC: 1

4 Oct 2000

3040-01-480-1896
Ai Shouldered Shaft

014801896
973509: RNCC: 3 | RNVC: 2

9 Nov 2000

3040-01-489-1084
Mechanically Actuated Spindle

014891084
124-4322605 PC 46: RNCC: 3 | RNVC: 2
124-4322603 PC 106: RNCC: 5 | RNVC: 2

12 Sep 2001

3040-01-500-3558
Mechanical Drive Housing

015003558
6181429: RNCC: 3 | RNVC: 2
6181429: RNCC: 5 | RNVC: 2
6181434 ITEM 1: RNCC: 5 | RNVC: 2

22 Aug 2002

3040-01-485-0111
Spring Sub-Assembly

014850111
7225827: RNCC: 3 | RNVC: 2
D1215125: RNCC: 5 | RNVC: 2

14 May 2001

3040-01-500-2009
Manual Control Lever

015002009
A048B-0160: RNCC: 3 | RNVC: 2
29529617: RNCC: 5 | RNVC: 2
A48B-160: RNCC: D | RNVC: 9

16 Aug 2002

3040-01-478-7215
Aircra Guide Spring

014787215
4308307-1: RNCC: 3 | RNVC: 2

25 Sep 2000

3040-01-479-5132
Linear Actuating Cylinder

014795132
39718: RNCC: 3 | RNVC: 2
4001-39710 ITEM 8: RNCC: 5 | RNVC: 2
4001-39710: RNCC: D | RNVC: 9

24 Oct 2000

3040-01-491-0088
Shouldered Shaft

014910088
803-6397269 PC 123: RNCC: 3 | RNVC: 2

10 Oct 2001

3040-01-476-6947
Rigid Connecting Link

014766947
6519-125: RNCC: 3 | RNVC: 2
74B428009-125: RNCC: 5 | RNVC: 2
74B428009-125: RNCC: 7 | RNVC: 2

20 Jul 2000

3040-01-480-7951
Mechanically Actuated Spindle

014807951
124-4367407 PC47: RNCC: 3 | RNVC: 2
124-4322648 PC62: RNCC: 5 | RNVC: 2
124-4322648: RNCC: D | RNVC: 9

6 Dec 2000

3040-01-501-0838
Mechanical Drive Housing Part

015010838
DBD022: RNCC: 3 | RNVC: 2

24 Sep 2002

3040-01-473-1901
Mechanically Actuated Spindle

014731901
124-5563772 PC 55: RNCC: 3 | RNVC: 2
124-5563773 PC 18: RNCC: 5 | RNVC: 2
5563772: RNCC: D | RNVC: 9
5563773: RNCC: D | RNVC: 9

29 Mar 2000

3040-01-503-1147
Extension Shaft

015031147
18-7212-1: RNCC: 3 | RNVC: 2
18-7212: RNCC: D | RNVC: 9

4 Dec 2002

3040-01-472-9791
Shaft Collar

014729791
124-4322620 PC 8-81: RNCC: 3 | RNVC: 2
4322620: RNCC: D | RNVC: 9

23 Mar 2000

3040-01-473-1287
Rigid Connecting Link

014731287
124-5563772 PC 40: RNCC: 3 | RNVC: 2
124-5563773 PC 12: RNCC: 3 | RNVC: 2
5563772: RNCC: D | RNVC: 9
5563773: RNCC: D | RNVC: 9

28 Mar 2000

3040-01-478-7221
Aircra Guide Spring

014787221
4308308-1: RNCC: 3 | RNVC: 2

25 Sep 2000

3040-01-483-2966
Linear Actuating Cylinder Assembly

014832966
5234-13608: RNCC: 3 | RNVC: 2
97-39-00: RNCC: 5 | RNVC: 9
5HB365: RNCC: C | RNVC: 1
5234-236.04: RNCC: C | RNVC: 1

23 Mar 2001

3040-01-492-9826
Shaft Collar

014929826
064-46733-000: RNCC: 3 | RNVC: 2
064-48733C000: RNCC: 5 | RNVC: 2
364-48575-000 REV D ITEM 31: RNCC: 5 | RNVC: 9
064-48733C000: RNCC: 5 | RNVC: 9
064-48733: RNCC: 5 | RNVC: 9

18 Dec 2001

3040-01-508-2767
Linear Actuating Cylinder Assembly

015082767
10104-1668-02: RNCC: 3 | RNVC: 2
10104-1668-02 REV C: RNCC: 5 | RNVC: 2

16 May 2003

3040-01-489-1548
Mechanically Actuated Spindle

014891548
124-4322603 PC 8B: RNCC: 3 | RNVC: 2
124-4322605 PC 30: RNCC: 5 | RNVC: 2
4322605: RNCC: D | RNVC: 9
4322603: RNCC: D | RNVC: 9

13 Sep 2001

3040-01-497-2756
Transmission Sleeve

014972756
7052622: RNCC: 3 | RNVC: 2
7052622: RNCC: 5 | RNVC: 2
7052622: RNCC: 5 | RNVC: 2
7052622: RNCC: 5 | RNVC: 9

15 May 2002

3040-01-500-3909
Multiple Gears Gearshaft

015003909
2P53527010A: RNCC: 3 | RNVC: 2

23 Aug 2002

3040-01-501-6971
Rigid Connecting Link

015016971
805-1626510-14: RNCC: 3 | RNVC: 2
805-1626510 PC: RNCC: C | RNVC: 1
1626510: RNCC: D | RNVC: 9

10 Oct 2002

3040-01-505-1648
Manual Control Lever Assembly

015051648
2D3-05013: RNCC: 3 | RNVC: 2
7D3-08346 ITEM NO 6: RNCC: 5 | RNVC: 2
7D3-08346: RNCC: D | RNVC: 9

25 Feb 2003

3040-01-483-9133
Gear Mechanism Suba

014839133
7225833: RNCC: 3 | RNVC: 2
D1217389: RNCC: 5 | RNVC: 2

11 Apr 2001

3040-01-487-8560
Shouldered Shaft

014878560
345905: RNCC: 3 | RNVC: 2
345905: RNCC: 3 | RNVC: 9
345905: RNCC: 5 | RNVC: 9

21 Aug 2001

3040-01-491-2835
Straight Shaft

014912835
151-7066458-42: RNCC: 3 | RNVC: 2
H462-0421-42: RNCC: 5 | RNVC: 2
H462-0421: RNCC: D | RNVC: 9
7066458: RNCC: D | RNVC: 9

17 Oct 2001

3040-01-503-1429
Extension Shaft

015031429
18-7212-2: RNCC: 3 | RNVC: 2
18-7212: RNCC: D | RNVC: 9

5 Dec 2002

3040-01-475-8606
Nonaircraft Mechanical Actuator

014758606
22002-43: RNCC: 3 | RNVC: 2
22002-43: RNCC: 5 | RNVC: 2
22002 ASSY B-800-22002-43: RNCC: C | RNVC: 1
B-800-22002-43: RNCC: C | RNVC: 1
22002: RNCC: D | RNVC: 9

15 Jun 2000

3040-01-492-9821
Shaft Collar

014929821
064-48123: RNCC: 3 | RNVC: 2
364-48575-000 REV D ITEM 2: RNCC: 5 | RNVC: 2
064-48123A000: RNCC: 5 | RNVC: 2

18 Dec 2001

3040-01-499-6699
Shaft Collar

014996699
JE3055-2: RNCC: 3 | RNVC: 2
JE-1153-8: RNCC: 5 | RNVC: 1

31 Jul 2002

3040-01-502-1205
Spur Gearshaft

015021205
23050529: RNCC: 3 | RNVC: 2

25 Oct 2002

3040-01-460-0450
Remote Control Lever

014600450
9383178-1: RNCC: 3 | RNVC: 2
9383178: RNCC: D | RNVC: 9

23 Oct 1998

3040-01-448-9299
Shouldered Shaft

014489299
72235: RNCC: 3 | RNVC: 2
50553: RNCC: 5 | RNVC: 9
50553: RNCC: 5 | RNVC: 9
72235: RNCC: 5 | RNVC: 9

15 Sep 1997

3040-01-453-8550
Straight Shaft

014538550
A4809400: RNCC: 3 | RNVC: 9
A4809400: RNCC: 5 | RNVC: 2

12 Mar 1998

3040-01-453-8706
Straight Shaft

014538706
A4809149: RNCC: 3 | RNVC: 2
A4809149: RNCC: 5 | RNVC: 2

12 Mar 1998

3040-01-434-9137
Rigid Connecting Link

014349137
BACR24N4B-157: RNCC: 3 | RNVC: 2
BACR24N4-157: RNCC: 5 | RNVC: 9

12 Aug 1996

3040-01-436-9820
Linear Actuating Cylinder Assembly

014369820
3075AS152-1: RNCC: 3 | RNVC: 2
TH7008048SA: RNCC: 5 | RNVC: 9

10 Feb 2021

3040-01-421-4691
Shouldered Shaft

014214691
0003-4575-301: RNCC: 3 | RNVC: 2
003-4575-301: RNCC: 3 | RNVC: 9
0003-4575: RNCC: D | RNVC: 9

8 Nov 1995

3040-01-422-7147
Linear Actuating Cylinder Assembly

014227147
205843: RNCC: 3 | RNVC: 2

6 Dec 1995

3040-01-461-9029
Linear Actuating Cylinder Assembly

014619029
1H000186981: RNCC: 3 | RNVC: 2
5038014: RNCC: 5 | RNVC: 9
1H000107893: RNCC: 5 | RNVC: 9
1.50CF/H-2HLTVS13C X 77.000: RNCC: 5 | RNVC: 9
AG189982C0: RNCC: 5 | RNVC: 9

11 Jan 1999

3040-01-467-0795
Rigid Connecting Link

014670795
3392AS313: RNCC: 3 | RNVC: 2

12 Aug 1999

3040-01-437-3154
Shouldered Shaft

014373154
114R3053-11: RNCC: 3 | RNVC: 2

10 Oct 1996

3040-01-437-5914
Helical Gearshaft

014375914
3520735: RNCC: 3 | RNVC: 2
5678014-SDN425 PC 202: RNCC: 5 | RNVC: 2
A3520735: RNCC: 5 | RNVC: 2
5678014: RNCC: D | RNVC: 9

18 Oct 1996

3040-01-440-4904
Linear Actuating Cylinder Assembly

014404904
2HHFF6CC: RNCC: 3 | RNVC: 2

15 Jan 1997

3040-01-434-5464
Straight Shaft

014345464
167-6404604 FIND 21: RNCC: 3 | RNVC: 2
167-6404604-21: RNCC: 5 | RNVC: 2
DF502-255-20: RNCC: 5 | RNVC: 9
6404604: RNCC: D | RNVC: 9

1 Aug 1996

3040-01-455-7310
Rigid Connecting Link

014557310
7012587-1: RNCC: 3 | RNVC: 2
7012587: RNCC: D | RNVC: 9

13 May 1998

3040-01-430-2615
Brake Shoe

014302615
M615: RNCC: 3 | RNVC: 2
92-AV101-N-SYM-108: RNCC: 5 | RNVC: 2
92-AV101-N: RNCC: D | RNVC: 9

25 Apr 1996

3040-01-439-8549
Straight Axle

014398549
8T8932: RNCC: 3 | RNVC: 2

20 Dec 1996

3040-01-423-2887
Linear Actuating Cylinder Assembly

014232887
EE111759B: RNCC: 3 | RNVC: 2
2CC2HKTVS14AC-3.125: RNCC: 5 | RNVC: 9

20 Dec 1995

3040-01-435-7170
Rigid Connecting Link

014357170
92-AV101-N-SYM-53A: RNCC: 3 | RNVC: 2
92-AV101-N: RNCC: D | RNVC: 9

30 Aug 1996

3040-01-454-1937
Shouldered Shaft

014541937
9325C02-1233-01: RNCC: 3 | RNVC: 2
60002361: RNCC: 5 | RNVC: 2
60001007: RNCC: 5 | RNVC: 9
60002381: RNCC: 5 | RNVC: 9

23 Mar 1998

3040-01-451-8302
Straight Shaft

014518302
1245942: RNCC: 3 | RNVC: 2

6 Jan 1998

3040-01-416-6896
Rigid Connecting Link

014166896
183650-03510: RNCC: 3 | RNVC: 2
183650-03510: RNCC: 3 | RNVC: 9
183560-03510: RNCC: 5 | RNVC: 9
183650-03510: RNCC: 5 | RNVC: 9

24 Jul 1995

3040-01-435-7167
Rigid Connecting Link

014357167
92-AV101-N-SYM-46A: RNCC: 3 | RNVC: 2
92-AV101-N: RNCC: D | RNVC: 9

30 Aug 1996

3040-01-452-9271
Shouldered Shaft

014529271
1245941: RNCC: 3 | RNVC: 2

12 Feb 1998

3040-01-453-8753
Straight Shaft

014538753
A4810055: RNCC: 3 | RNVC: 9
A4810055: RNCC: 5 | RNVC: 2
A4810055: RNCC: 5 | RNVC: 9

12 Mar 1998

3040-01-463-9952
Linear Actuating Cylinder Cap

014639952
L20500-33/34: RNCC: 3 | RNVC: 2
L20500-34: RNCC: 5 | RNVC: 9

13 Apr 1999

3040-01-358-9001
Friction Lining

013589001
3.12.795R: RNCC: 3 | RNVC: 2
3.12.795R(A): RNCC: 5 | RNVC: 2
3.12.795R: RNCC: 5 | RNVC: 2
70143 ITEM-8: RNCC: 5 | RNVC: 2
70143: RNCC: D | RNVC: 9

22 May 1992

3040-01-393-3021
Shouldered Shaft

013933021
642AS0512: RNCC: 3 | RNVC: 2

18 Jul 1994

3040-01-406-4731
Shaft Collar

014064731
SS350-175: RNCC: 3 | RNVC: 2
SS350-175: RNCC: 5 | RNVC: 9

5 Jan 1995

3040-01-369-9175
Mechanical Drive Housing

013699175
65-18959-5: RNCC: 3 | RNVC: 2
65-18959-3: RNCC: 5 | RNVC: 9
65-18959-3: RNCC: 5 | RNVC: 9

8 Jan 1993

3040-01-370-0229
Linear Actuating Cylinder Assembly

013700229
6-372-003463: RNCC: 3 | RNVC: 2
6-372-003463: RNCC: 5 | RNVC: 2
6-372-003463: RNCC: 5 | RNVC: 2

11 Jan 1993

3040-01-387-3982
Spur Gearshaft

013873982
2210537-1: RNCC: 3 | RNVC: 2
2210537-1: RNCC: 5 | RNVC: 2
2210537: RNCC: D | RNVC: 9

4 Mar 1994

3040-01-368-6669
Hydraulic Accumulator

013686669
0531115650: RNCC: 3 | RNVC: 9
HI-390-80027 ITEM 10: RNCC: 5 | RNVC: 2

5 Dec 1992

3040-01-377-2934
Linear Actuating Cylinder

013772934
6G3641: RNCC: 3 | RNVC: 2

12 Jul 1993

3040-01-364-6289
Rigid Connecting Link

013646289
17P2A3128-1: RNCC: 3 | RNVC: 2

22 Sep 1992

3040-01-411-8921
Counterbalance Weight

014118921
17P3A8032-1: RNCC: 3 | RNVC: 2

4 Apr 1995

3040-01-373-0530
Shouldered Shaft

013730530
5905735: RNCC: 3 | RNVC: 2

26 Mar 1993

3040-01-412-1692
Ball Joint

014121692
201553: RNCC: 3 | RNVC: 2
KYINAAF: RNCC: 5 | RNVC: 9
KYINAAF: RNCC: C | RNVC: 1

12 Apr 1995

3040-01-406-8768
Linear Actuating Cylinder Piston

014068768
200917: RNCC: 3 | RNVC: 2
200917: RNCC: 5 | RNVC: 2
200917: RNCC: 5 | RNVC: 2

13 Jan 1995

3040-01-385-6742
Shaft Collar

013856742
SP8SS: RNCC: 3 | RNVC: 2
6436K34: RNCC: 5 | RNVC: 2
912S0112-2: RNCC: 5 | RNVC: 2

16 Jan 1994

3040-01-383-8586
Linear Actuating Cylinder Piston

013838586
518-4674804 ITEM 1MOD: RNCC: 3 | RNVC: 2
518-4674804 ITE: RNCC: C | RNVC: 1

4 Dec 1993

3040-01-365-1889
Belt-Chain Tension Adjusting Device

013651889
1501123-05: RNCC: 3 | RNVC: 2
10107279: RNCC: 6 | RNVC: 9

2 Oct 1992

3040-01-395-7330
Rigid Connecting Link

013957330
83337-1: RNCC: 3 | RNVC: 2
81760 ITEM 40: RNCC: 5 | RNVC: 2
81760: RNCC: D | RNVC: 9

2 Sep 1994

3040-01-363-8165
Rigid Connecting Link

013638165
17P2C1413-505: RNCC: 3 | RNVC: 2

6 Sep 1992

3040-01-379-9084
Shouldered Shaft

013799084
1210D3495: RNCC: 3 | RNVC: 2
1210D3495: RNCC: 5 | RNVC: 9

10 Sep 1993

3040-01-407-4904
Detent Plate

014074904
6206992: RNCC: 3 | RNVC: 2

30 Jan 1995

3040-01-367-0144
Shouldered Shaft

013670144
2W6382: RNCC: 3 | RNVC: 2
7W6957 ITEM 6: RNCC: 3 | RNVC: 2
7W6957 REV 01 ITEM 6-SHAFT: RNCC: 5 | RNVC: 2

5 Nov 1992

3040-01-308-5435
Shouldered Shaft

013085435
10029079-2: RNCC: 3 | RNVC: 2

30 Sep 1989

3040-01-349-7928
Bell Crank

013497928
C230413: RNCC: 3 | RNVC: 2
A230286 FIND 1: RNCC: 5 | RNVC: 2
A230286: RNCC: D | RNVC: 9

4 Dec 1991

3040-01-311-9523
Spur Gearshaft

013119523
D406053ITEM3: RNCC: 3 | RNVC: 2

7 Dec 1989

3040-01-318-8504
Linear Actuating Cylinder Assembly

013188504
676649: RNCC: 3 | RNVC: 2

26 Apr 1990

3040-01-329-1678
Nonrotating Shaft Eye Bracket

013291678
12370704: RNCC: 3 | RNVC: 2
12370704: RNCC: 5 | RNVC: 2
12370704: RNCC: 5 | RNVC: 2

11 Nov 1990

3040-01-346-1977
Remote Control Lever

013461977
4N0940: RNCC: 3 | RNVC: 2

28 Sep 1991

3040-01-354-4841
Linear Actuating Cylinder Assembly

013544841
27830: RNCC: 3 | RNVC: 2

29 Feb 1992

3040-01-338-6490
Linear Actuating Cylinder Piston

013386490
1317823: RNCC: 3 | RNVC: 2
1317823: RNCC: 5 | RNVC: 9
371245: RNCC: D | RNVC: 9

8 May 1991

3040-01-314-5924
Worm Shaft

013145924
D405256ITEM1/ITEM2: RNCC: 3 | RNVC: 2
D405256ITEM2: RNCC: 5 | RNVC: 9

1 Feb 1990

3040-01-325-9048
Straight Shaft

013259048
M-60400: RNCC: 3 | RNVC: 2

13 Sep 1990

3040-01-337-7303
Shouldered Shaft

013377303
AMD-693 ITEM 8: RNCC: 3 | RNVC: 2
MMD-1272: RNCC: D | RNVC: 9

21 Apr 1991

3040-01-312-4508
Mechanical Drive Housing

013124508
D406054ITEM2: RNCC: 3 | RNVC: 2
D406054: RNCC: D | RNVC: 9

15 Dec 1989

3040-01-313-4685
Control Cam

013134685
2766: RNCC: 3 | RNVC: 2
2766: RNCC: 5 | RNVC: 9

9 Jan 1990

3040-01-346-1974
Remote Control Lever

013461974
4N0941: RNCC: 3 | RNVC: 2

28 Sep 1991

3040-01-311-9525
Mechanical Drive Housing

013119525
D406053ITEM7: RNCC: 3 | RNVC: 2
D406053: RNCC: D | RNVC: 9

7 Dec 1989

3040-01-311-9522
Spur Gearshaft

013119522
D406053ITEM2: RNCC: 3 | RNVC: 2

7 Dec 1989

3040-01-319-0118
Mechanical Drive Housing

013190118
175F456-80: RNCC: 3 | RNVC: 2

29 Apr 1990

3040-01-350-3890
Mechanical Drive Housing

013503890
SA88210086: RNCC: 3 | RNVC: 2
V88210086: RNCC: 5 | RNVC: 2
2HE623: RNCC: 5 | RNVC: 2
V88210086: RNCC: 5 | RNVC: 9
SA88210086: RNCC: 5 | RNVC: 9
2HE623: RNCC: 5 | RNVC: 9
V88210086: RNCC: 5 | RNVC: 9

14 Dec 1991

3040-01-328-8638
Straight Shaft

013288638
D10773-001: RNCC: 3 | RNVC: 9
D10773-001: RNCC: 5 | RNVC: 2
D10773: RNCC: 5 | RNVC: 9
D10773-001: RNCC: 5 | RNVC: 9

8 Nov 1990

3040-01-352-3776
Shaft Collar

013523776
224-0082-209: RNCC: 3 | RNVC: 2
224-0082-209: RNCC: 3 | RNVC: 9
PART-NO-224-008: RNCC: 5 | RNVC: 9
3040PL1287504: RNCC: 6 | RNVC: 9

25 Jan 1992

3040-01-323-9514
Hydraulic Swiv Ring

013239514
AE15070-001: RNCC: 3 | RNVC: 2

6 Aug 1990

3040-01-328-3489
Gear Axle

013283489
1353AS162-1: RNCC: 3 | RNVC: 2

30 Oct 1990

3040-01-330-7799
Straight Shaft

013307799
6L8858: RNCC: 3 | RNVC: 2

8 Dec 1990

3040-01-330-8076
Shouldered Shaft

013308076
B60520-01: RNCC: 3 | RNVC: 2
PL-30451-01 ITEM 6: RNCC: 5 | RNVC: 2
30451: RNCC: D | RNVC: 9

9 Dec 1990

3040-01-311-5088
Mechanical Drive Housing

013115088
10029092: RNCC: 3 | RNVC: 2

29 Nov 1989

3040-01-323-1801
Mechanical Drive Housing

013231801
5544108: RNCC: 3 | RNVC: 2
5544108: RNCC: 5 | RNVC: 2

23 Jul 1990

3040-01-346-0095
Ball Joint

013460095
029104: RNCC: 3 | RNVC: 9
039104: RNCC: 5 | RNVC: 2
029104: RNCC: 5 | RNVC: 2
029104: RNCC: 5 | RNVC: 2

25 Sep 1991

3040-01-273-3205
Shaft Collar

012733205
R59688P1T1: RNCC: 3 | RNVC: 2
R59688P1T1: RNCC: 3 | RNVC: 9
R59688P1T1: RNCC: 5 | RNVC: 9
R59688P1T1: RNCC: 5 | RNVC: 9

24 Feb 1988

3040-01-305-3314
Helical Gearshaft

013053314
12370119: RNCC: 3 | RNVC: 2

3 Aug 1989

3040-01-280-4111
Straight Shaft

012804111
R59686: RNCC: 3 | RNVC: 2
R59686P1: RNCC: 3 | RNVC: 2
R59686: RNCC: 5 | RNVC: 9
R59686P1: RNCC: 5 | RNVC: 9
R59686P1: RNCC: 5 | RNVC: 9
R59686: RNCC: 5 | RNVC: 9
R59686P1: RNCC: 5 | RNVC: 9
R59686: RNCC: 5 | RNVC: 9

9 Jun 1988

3040-01-299-7069
Left Hand Flange Plate

012997069
12312992: RNCC: 3 | RNVC: 2
12312992: RNCC: 5 | RNVC: 2

4 May 1989

3040-01-284-4929
Linear Actuating Cylinder Assembly

012844929
7-5075-2: RNCC: 3 | RNVC: 2
568-5749798-003: RNCC: 5 | RNVC: 2
7-5075-2: RNCC: 5 | RNVC: 9

24 Aug 1988

3040-01-298-7241
Flexible Shaft Assembly Casing

012987241
5-4-2936-1: RNCC: 3 | RNVC: 2

20 Apr 1989

3040-01-283-7236
Push-Pull Control Assembly

012837236
D043145-002-0084.0: RNCC: 3 | RNVC: 2
1484 PC 37: RNCC: 5 | RNVC: 2
D043145-002-0084.0: RNCC: 5 | RNVC: 9
1484 PC 37: RNCC: 5 | RNVC: 9
1484 PC 37: RNCC: 5 | RNVC: 9
1484: RNCC: D | RNVC: 9

12 Aug 1988

3040-01-281-5815
Linear Actuating Cylinder Piston

012815815
PA1-0611: RNCC: 3 | RNVC: 2

28 Jun 1988

3040-01-288-3289
Engi Shaft Assembly

012883289
4N1106: RNCC: 3 | RNVC: 2

5 Nov 1988

3040-01-298-8930
Straight Shaft

012988930
10029131: RNCC: 3 | RNVC: 2

23 Apr 1989

3040-01-286-5746
Straight Shaft

012865746
12364147: RNCC: 3 | RNVC: 2

5 Oct 1988

3040-01-289-7162
Engi Shaft Assembly

012897162
4N1116: RNCC: 3 | RNVC: 2

29 Nov 1988

3040-01-297-7513
Counterbalance Weight

012977513
8935W17P001: RNCC: 3 | RNVC: 2

6 Apr 1989

3040-01-300-3644
Shouldered Shaft

013003644
10252068-1: RNCC: 3 | RNVC: 2
10252068-1: RNCC: 5 | RNVC: 1

13 May 1989

3040-01-300-3079
Mechanical Drive Housing

013003079
A-3235-P-1134: RNCC: 3 | RNVC: 2
A3235P1134: RNCC: 5 | RNVC: 2
EVC-C2 ITEM 35: RNCC: 5 | RNVC: 9
EVC-C2: RNCC: D | RNVC: 9

12 May 1989

3040-01-307-8966
Rigid Connecting Link

013078966
7-311527035-43: RNCC: 3 | RNVC: 2
7-311527035-31: RNCC: 5 | RNVC: 2
7-311527035-31: RNCC: 5 | RNVC: 9
7-311527035-43: RNCC: 5 | RNVC: 9

19 Sep 1989

3040-01-281-1102
Linear Actuating Cylinder Assembly

012811102
GG113133A0: RNCC: 3 | RNVC: 2
3.25C-2HLTS24ACX48.500: RNCC: 5 | RNVC: 9
AG160859A0: RNCC: 5 | RNVC: 9

17 Jun 1988

3040-01-226-0402
Push-Pull Control Assembly

012260402
A-2861-39: RNCC: 3 | RNVC: 2
A-2861-39VM: RNCC: 5 | RNVC: 2
A-2861-39: RNCC: 5 | RNVC: 9

11 Feb 1986

3040-01-253-4657
Mechanical Drive Housing

012534657
4S8708: RNCC: 3 | RNVC: 2

18 Apr 1987

3040-01-231-5033
Shaft Collar

012315033
TSP24-12SS: RNCC: 3 | RNVC: 2
5451.130.3: RNCC: 5 | RNVC: 2

29 Apr 1986

3040-01-252-1228
Shaft Retaining Plate

012521228
217F469: RNCC: 3 | RNVC: 2

29 Mar 1987

3040-01-247-5561
Control Cam

012475561
845-4457605 PIECE 33: RNCC: 3 | RNVC: 2
845-4457605: RNCC: D | RNVC: 9
845-4457606: RNCC: D | RNVC: 9
845-4457605: RNCC: D | RNVC: 9

8 Jan 1987

3040-01-262-6062
Straight Shaft

012626062
1000-04453: RNCC: 3 | RNVC: 2
969-17A: RNCC: 5 | RNVC: 9

2 Sep 1987

3040-01-233-1775
Remote Control Lever

012331775
311-5750041-019: RNCC: 3 | RNVC: 2
5750041-019: RNCC: 5 | RNVC: 9
5750041-019: RNCC: C | RNVC: 1
311-5750041: RNCC: D | RNVC: 9

27 May 1986

3040-01-267-3696
Linear Actuating Cylinder Assembly

012673696
HP336CB1 1/2X3: RNCC: 3 | RNVC: 2
1191692: RNCC: 3 | RNVC: 2
1191692: RNCC: C | RNVC: 1

10 Nov 1987

3040-01-257-8830
Control Cam

012578830
1029-0000: RNCC: 3 | RNVC: 2

25 Jun 1987

3040-01-266-4259
Straight Shaft

012664259
11-0219-100: RNCC: 3 | RNVC: 2

24 Oct 1987

3040-01-228-3979
Valve Shaft

012283979
306R002: RNCC: 3 | RNVC: 2

18 Mar 1986

3040-01-210-2793
Manual Control Lever

012102793
451032: RNCC: 3 | RNVC: 2
451032: RNCC: 3 | RNVC: 9
451032: RNCC: 5 | RNVC: 9
1008NC-6273: RNCC: 5 | RNVC: 9
NF-6476 PIECE 1008: RNCC: 5 | RNVC: 9

11 Jun 1985

3040-01-221-5484
Linear Actuating Cylinder Piston Rod

012215484
1F24840P1: RNCC: 3 | RNVC: 2
1F24840P1: RNCC: 3 | RNVC: 9
1F24840P1: RNCC: 5 | RNVC: 9
1F24840P1: RNCC: 5 | RNVC: 9
1F24840P1: RNCC: 5 | RNVC: 9

29 Nov 1985

3040-01-224-2259
Rigid Connecting Link

012242259
7-311511130-5: RNCC: 3 | RNVC: 2
7-311511130-5: RNCC: 3 | RNVC: 9

14 Jan 1986

3040-01-224-3842
Actuator Yoke

012243842
VA112041-005: RNCC: 3 | RNVC: 2
112041-005: RNCC: 3 | RNVC: 9
D-60001 ITEM 1-360: RNCC: 5 | RNVC: 9
016777: RNCC: 5 | RNVC: 9
D-60001: RNCC: D | RNVC: 9

15 Jan 1986

3040-01-176-7589
Counterbalance Weight

011767589
164B8789P3: RNCC: 3 | RNVC: 2
10106461: RNCC: 6 | RNVC: 9

16 Apr 1984

3040-01-162-4303
Shaft Retaining Plate

011624303
1P6153: RNCC: 3 | RNVC: 2

17 Sep 1983

3040-01-157-3657
Shaft Retaining Plate

011573657
9828931: RNCC: 3 | RNVC: 2
999 7253: RNCC: 3 | RNVC: 9
2AW772: RNCC: 5 | RNVC: 2
2AW772: RNCC: 5 | RNVC: 9

4 Jul 1983

3040-01-168-7554
Piston Rod Guide

011687554
1557003: RNCC: 3 | RNVC: 2
1557003: RNCC: 5 | RNVC: 2

22 Dec 1983

3040-01-181-7451
Inertia Damper

011817451
001-622446-6: RNCC: 3 | RNVC: 2

14 Jun 1984

3040-01-157-6315
Spur Gearshaft

011576315
7739703: RNCC: 3 | RNVC: 2

9 Jul 1983

3040-01-174-9452
Shaft Collar

011749452
A04491: RNCC: 3 | RNVC: 2
3200611000: RNCC: 5 | RNVC: 2
A04491: RNCC: C | RNVC: 1

24 Mar 1984

3040-01-176-7588
Counterbalance Weight

011767588
164B8789P2: RNCC: 3 | RNVC: 2
10106460: RNCC: 6 | RNVC: 9
164B8789: RNCC: D | RNVC: 9

16 Apr 1984

3040-01-168-1973
Straight Shaft

011681973
6-810-001857: RNCC: 3 | RNVC: 2
B6-810-001857: RNCC: D | RNVC: 9

14 Dec 1983

3040-01-181-4390
Bell Crank

011814390
L6311188-001: RNCC: 3 | RNVC: 2

9 Jun 1984

3040-01-187-5064
Linear Actuating Cylinder Assembly

011875064
528P393: RNCC: 3 | RNVC: 2
528P393CP: RNCC: 5 | RNVC: 2
528P292CP: RNCC: 5 | RNVC: 9
528P393CP: RNCC: 5 | RNVC: 9
528P292: RNCC: 5 | RNVC: 9

23 Aug 1984

3040-01-160-0253
Rigid Connecting Link

011600253
3240581: RNCC: 3 | RNVC: 2
3040PL0890782: RNCC: 6 | RNVC: 9

17 Aug 1983

3040-01-176-7591
Counterbalance Weight

011767591
164B8789P5: RNCC: 3 | RNVC: 2
10130501: RNCC: 6 | RNVC: 9

16 Apr 1984

3040-01-187-9452
Rigid Connecting Link

011879452
12315558-1: RNCC: 3 | RNVC: 2

29 Aug 1984

3040-01-135-8503
Bell Crank

011358503
3537532: RNCC: 3 | RNVC: 2
3537532: RNCC: 5 | RNVC: 2
3537532: RNCC: 5 | RNVC: 9
3537532: RNCC: 5 | RNVC: 9
10106896: RNCC: 6 | RNVC: 9

30 Jul 1982

3040-01-153-1288
Indicator Arm

011531288
4674138-0010: RNCC: 3 | RNVC: 2
87552-2605 ITEM 10: RNCC: 5 | RNVC: 2
4674138-001: RNCC: 5 | RNVC: 2
0726-378PC10: RNCC: C | RNVC: 1

13 May 1983

3040-01-100-4977
Cam Shaft

011004977
188460-0030: RNCC: 3 | RNVC: 2
281456-0001 ITEM 27: RNCC: 3 | RNVC: 2
188460-0036: RNCC: 5 | RNVC: 9

7 Sep 1980

3040-01-133-7394
Shouldered Shaft

011337394
7-0015-01: RNCC: 3 | RNVC: 2
PL80SLV-5 ITEM 7: RNCC: 3 | RNVC: 9
55-22211-15: RNCC: 5 | RNVC: 9
NF12199-000: RNCC: 5 | RNVC: 9
NG14145 ITEM 7: RNCC: C | RNVC: 1
8-0SL-6 ITEM 7: RNCC: C | RNVC: 1

19 Jun 1982

3040-01-115-7619
Rigid Connecting Link

011157619
716-702004-3: RNCC: 3 | RNVC: 9
10106765: RNCC: 6 | RNVC: 9
716-702004-3: RNCC: C | RNVC: 1
716-702004: RNCC: D | RNVC: 9

12 Jul 1981

3040-01-125-5895
Shouldered Shaft

011255895
87841-0208 ITEM 25: RNCC: 3 | RNVC: 2
708-4684961 ITEM 25: RNCC: 5 | RNVC: 2
87841-0208 PC25: RNCC: 5 | RNVC: 9
87841-0208 PC25: RNCC: 5 | RNVC: 9
87841-0208 ITEM 25: RNCC: 5 | RNVC: 9
87841-0208: RNCC: D | RNVC: 9
708-4684961: RNCC: D | RNVC: 9

29 Jan 1982

3040-01-136-3222
Brake Disc

011363222
1520-5731: RNCC: 3 | RNVC: 2

6 Aug 1982

3040-01-117-7356
Rigid Connecting Link

011177356
145C3340-1: RNCC: 3 | RNVC: 2

21 Aug 1981

3040-01-127-7887
Flexible Shaft Assembly

011277887
114D200: RNCC: 3 | RNVC: 2
3040PL1262344: RNCC: 6 | RNVC: 9

7 Mar 1982

3040-01-132-7154
Straight Shaft

011327154
5-29849-40: RNCC: 3 | RNVC: 2
5-29849-40: RNCC: 5 | RNVC: 9

3 Jun 1982

3040-01-126-4627
Body Hub

011264627
8921059: RNCC: 3 | RNVC: 2
5104784: RNCC: 5 | RNVC: 9
5138971: RNCC: 5 | RNVC: 9
3040PL0945174: RNCC: 6 | RNVC: 9

11 Feb 1982

3040-01-129-0821
Spur Gearshaft

011290821
2047511-1: RNCC: 3 | RNVC: 2
2047511-1: RNCC: 5 | RNVC: 9
10106863: RNCC: 6 | RNVC: 9
2047511: RNCC: D | RNVC: 9

31 Mar 1982

3040-01-129-8027
Shouldered Shaft

011298027
AYC-490-C: RNCC: 3 | RNVC: 2
GCP-661: RNCC: D | RNVC: 9

11 Apr 1982

3040-01-147-9999
Shouldered Shaft

011479999
73907: RNCC: 3 | RNVC: 2

26 Feb 1983

3040-01-109-6954
Spur Gearshaft

011096954
12317184: RNCC: 3 | RNVC: 2

19 Mar 1981

3040-01-110-1035
Linear Actuating Cylinder Cap

011101035
28919: RNCC: 3 | RNVC: 2
895-28365 ITEM 6: RNCC: 5 | RNVC: 2
895-28365: RNCC: D | RNVC: 9

26 Mar 1981

3040-01-146-8405
Worm Shaft

011468405
65311-01007-101: RNCC: 3 | RNVC: 2
65311-01007-101: RNCC: 5 | RNVC: 2
65311-01007-101: RNCC: 5 | RNVC: 2

7 Feb 1983

3040-01-110-2310
Linear Actuating Cylinder Cap

011102310
28918: RNCC: 3 | RNVC: 2
895-28365 ITEM 5: RNCC: 5 | RNVC: 2
895-28365: RNCC: D | RNVC: 9

28 Mar 1981

3040-01-059-5577
Pad Holder Assembly

010595577
7287659: RNCC: 3 | RNVC: 2
46296-432: RNCC: 5 | RNVC: 9
46296-432: RNCC: 5 | RNVC: 9

13 Apr 1978

3040-01-062-4168
Straight Shaft

010624168
40264-501: RNCC: 3 | RNVC: 2

16 Jul 1978

3040-01-068-9729
Straight Shaft

010689729
2P3295: RNCC: 3 | RNVC: 2

7 Dec 1978

3040-01-083-5429
Mechanical Drive Housing

010835429
11636133: RNCC: 3 | RNVC: 2

26 Sep 1979

3040-01-067-5557
Straight Shaft

010675557
5S7010: RNCC: 3 | RNVC: 2

3 Nov 1978

3040-01-075-6494
Remote Control Lever

010756494
12270242-1: RNCC: 3 | RNVC: 2

25 Apr 1979

3040-01-097-0922
Shouldered Shaft

010970922
114R3053-8: RNCC: 3 | RNVC: 2
114R3053-6: RNCC: 5 | RNVC: 9

6 Jul 1980

3040-01-100-0813
Linear Actuating Cylinder Piston

011000813
20306-1000: RNCC: 3 | RNVC: 2
20306-001 FIND 4: RNCC: 5 | RNVC: 9
20306-001: RNCC: D | RNVC: 9

27 Aug 1980

3040-01-086-4138
Manual Control Lever

010864138
69D4887-1: RNCC: 3 | RNVC: 2
316539: RNCC: 3 | RNVC: 9
9793: RNCC: 5 | RNVC: 9
69D4887-1: RNCC: 5 | RNVC: 9
69D4887-1: RNCC: 5 | RNVC: 9
69D4887: RNCC: D | RNVC: 9
316272: RNCC: D | RNVC: 9

28 Nov 1979

3040-01-086-8457
Brake Shoe

010868457
8X2970: RNCC: 3 | RNVC: 2
687296: RNCC: 5 | RNVC: 9
2K4733: RNCC: 5 | RNVC: 9
4012808: RNCC: C | RNVC: 1

6 Dec 1979

3040-01-086-8776
Linear Actuating Cylinder Piston Rod

010868776
4687550-0002: RNCC: 3 | RNVC: 2
4687550-0002: RNCC: 5 | RNVC: 2
2642-693-03 ITEM 2: RNCC: 5 | RNVC: 2
4687550-0002: RNCC: C | RNVC: 1
2642-693-03: RNCC: D | RNVC: 9
4687550: RNCC: D | RNVC: 9

6 Dec 1979

3040-01-061-6962
Terminal Shaft

010616962
375655: RNCC: 3 | RNVC: 2
375655: RNCC: 5 | RNVC: 9
3040PL0940194: RNCC: 6 | RNVC: 9

27 Jun 1978

3040-01-067-5601
Rigid Connecting Link

010675601
803-6397265: RNCC: 3 | RNVC: 2
4710519: RNCC: 5 | RNVC: 9

3 Nov 1978

3040-01-068-9745
Straight Shaft

010689745
4S8534: RNCC: 3 | RNVC: 2

7 Dec 1978

3040-01-096-6351
Straight Shaft

010966351
C135378-1: RNCC: 3 | RNVC: 2

25 Jun 1980

3040-01-024-5290
Rigid Connecting Link

010245290
4500-287: RNCC: 3 | RNVC: 2
4028-287: RNCC: 5 | RNVC: 9
4028-29: RNCC: 5 | RNVC: 9

12 Jul 1976

3040-01-026-4543
Brake Actuation Shaft

010264543
162D725152-2003: RNCC: 3 | RNVC: 2
160D725152-3: RNCC: 5 | RNVC: 2
162D725152-2003: RNCC: 5 | RNVC: 2
160D725152-3: RNCC: 5 | RNVC: 9
160D725152-3: RNCC: C | RNVC: 1

24 Aug 1976

3040-01-030-9903
Shaft Retaining Plate

010309903
11632863: RNCC: 3 | RNVC: 2
3H5521: RNCC: 5 | RNVC: 2

16 Nov 1976

3040-01-026-1187
Mechanical Drive Housing

010261187
8436926: RNCC: 3 | RNVC: 2

15 Aug 1976

3040-00-956-6436
Shouldered Shaft

009566436
3-40145-2: RNCC: 3 | RNVC: 2
3-40145-2: RNCC: 5 | RNVC: 2
3-40145-2: RNCC: 5 | RNVC: 2
3-40145-2: RNCC: 5 | RNVC: 2
3-40145-2: RNCC: 5 | RNVC: 9
3-40145-2: RNCC: 5 | RNVC: 9
3-40145-2: RNCC: 5 | RNVC: 9
3-40145-2: RNCC: 5 | RNVC: 9
3-40145-2: RNCC: 5 | RNVC: 9

11 May 1966

3040-00-966-5039
Counterbalance Weight

009665039
473856CL1: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-895-6496
Control Cam

008956496
8215789: RNCC: 3 | RNVC: 2
3040008956496: RNCC: 6 | RNVC: 9

1 Jan 1962

3040-00-925-7649
Turbine Engine Counter Balance Weight

009257649
541157CL1: RNCC: 3 | RNVC: 2
541157CL1: RNCC: 5 | RNVC: 9

24 Jan 1966

3040-00-936-5336
Control Cam

009365336
8351619: RNCC: 3 | RNVC: 2
8351619: RNCC: 5 | RNVC: 2

8 Mar 1967

3040-00-936-5339
Mechanical Drive Housing

009365339
8351930: RNCC: 3 | RNVC: 2
2520009365339: RNCC: 5 | RNVC: 9
8351928: RNCC: 5 | RNVC: 9

8 Mar 1967

3040-00-950-3650
Clutch Lever Shaft

009503650
9H2981: RNCC: 3 | RNVC: 2

4 May 1966

3040-00-882-0962
Flexible Shaft Assembly Core

008820962
M10215-1F407: RNCC: 2 | RNVC: 2
MIL-DTL-10215: RNCC: 4 | RNVC: 1
M10215-1B4-7: RNCC: 5 | RNVC: 9
MS51072-7: RNCC: 5 | RNVC: 9
MIL-PRF-10215: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-933-1868
Flexible Shaft Assembly Casing

009331868
21323-11706: RNCC: 3 | RNVC: 2

24 Feb 1967

3040-00-938-9619
Rigid Connecting Link

009389619
65400-00111-066: RNCC: 3 | RNVC: 2
65400-00111-066: RNCC: 5 | RNVC: 2
65400-00111-066: RNCC: 8 | RNVC: 2

3 Nov 1965

3040-00-885-0950
Control Cam

008850950
35183: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-868-1060
Rigid Connecting Link

008681060
104208-1: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-867-0616
Shouldered Shaft

008670616
6846749: RNCC: 3 | RNVC: 2
6780719: RNCC: 3 | RNVC: 9
6846749: RNCC: 5 | RNVC: 2
6846749: RNCC: 5 | RNVC: 9
6846749: RNCC: 5 | RNVC: 9
6846749: RNCC: 5 | RNVC: 9
6846749: RNCC: 5 | RNVC: 9
6846749: RNCC: 5 | RNVC: 9
6846749: RNCC: 5 | RNVC: 9
6846749: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-711-4527
Straight Shaft

007114527
7793079: RNCC: 3 | RNVC: 9
3040007114527: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-797-0142
Rigid Connecting Link

007970142
14711-308: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-806-6388
Rigid Connecting Link

008066388
826998-3: RNCC: 3 | RNVC: 2
826998-3: RNCC: 5 | RNVC: 2
826998-3: RNCC: 5 | RNVC: 9
826998-3: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-789-9267
Mechanical Drive Housing

007899267
203368: RNCC: 3 | RNVC: 2
203368: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-679-9623
Shouldered Shaft

006799623
8756583: RNCC: 3 | RNVC: 2
2520006799623: RNCC: 5 | RNVC: 9
8756583: RNCC: 5 | RNVC: 9
8754583: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-828-7129
Flexible Drive Shaft

008287129
104278: RNCC: 3 | RNVC: 2
A-5621: RNCC: 3 | RNVC: 2
446900-7F-8: RNCC: 5 | RNVC: 9

30 Aug 1967

3040-00-793-1708
Flexible Casing Coupling Nut

007931708
H9-585-83-0001: RNCC: 3 | RNVC: 1
49A3819: RNCC: 5 | RNVC: 2
49A3819: RNCC: 5 | RNVC: 9
49A3819: RNCC: 5 | RNVC: 9
49A3819: RNCC: 5 | RNVC: 9
H9-585-83-0001: RNCC: 5 | RNVC: 9
49A3819: RNCC: D | RNVC: 9

1 Jan 1960

3040-00-830-1895
Rigid Connecting Link

008301895
10643: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-767-8610
Manual Control Lever

007678610
3-50755-1: RNCC: 3 | RNVC: 2
3-50755-1: RNCC: 3 | RNVC: 9
3-50755-1: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-671-3189
Rigid Connecting Link

006713189
55012: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-735-4183
Bevel Gearshaft

007354183
3224084: RNCC: 3 | RNVC: 2
3224084: RNCC: 5 | RNVC: 9
3040PL0956226: RNCC: 6 | RNVC: 9

23 Feb 1968

3040-00-670-6913
Linear Actuating Cylinder Cap

006706913
63D52630-7: RNCC: 3 | RNVC: 2
63D52630-7: RNCC: 3 | RNVC: 9
63D52630-1: RNCC: 5 | RNVC: 9
56B23342: RNCC: 5 | RNVC: 9
63D52630-1: RNCC: 5 | RNVC: 9
56B23342: RNCC: 5 | RNVC: 9
56B23342: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-709-3658
Rigid Connecting Link

007093658
2-13787-1: RNCC: 3 | RNVC: 2
2-13787-1: RNCC: 5 | RNVC: 2
2-13787-1: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-616-9779
Mechanical Drive Housing

006169779
6169779: RNCC: 3 | RNVC: 2
6169779: RNCC: D | RNVC: 9

1 Jan 1963

3040-00-607-8856
Shouldered Shaft

006078856
0101222: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-465-8944
Rigid Connecting Link

004658944
65652-11227-081: RNCC: 3 | RNVC: 2
65652-11227-081: RNCC: 5 | RNVC: 2
65652-11227-081: RNCC: 5 | RNVC: 2
65652-11227-081: RNCC: 5 | RNVC: 9

19 Jan 1970

3040-00-589-4869
Housing Adapter

005894869
6797684: RNCC: 3 | RNVC: 2
6797684: RNCC: 5 | RNVC: 2
6797684: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-557-8136
Shouldered Shaft

005578136
8348921: RNCC: 3 | RNVC: 2

11 Nov 1974

3040-00-603-2461
Shouldered Shaft

006032461
610212: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-464-4509
Shaft Collar

004644509
CL8SS: RNCC: 3 | RNVC: 2
15414: RNCC: 3 | RNVC: 2
CSSC50: RNCC: 5 | RNVC: 2
8SS: RNCC: 5 | RNVC: 9

21 May 1969

3040-00-468-8232
Manual Control Lever

004688232
033022: RNCC: 3 | RNVC: 2
113P033022: RNCC: 5 | RNVC: 2
1853569: RNCC: 5 | RNVC: 2
P1414-4: RNCC: 5 | RNVC: 9
113P033022: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-435-5580
Shouldered Shaft

004355580
C5A27972: RNCC: 3 | RNVC: 2
C5A27972: RNCC: 3 | RNVC: 2
C5A27972: RNCC: 3 | RNVC: 9

19 Mar 1969

3040-00-410-0587
Shouldered Shaft

004100587
4F24527-101A: RNCC: 3 | RNVC: 2

13 Aug 1969

3040-00-329-1071
L Cylinder Assembly

003291071
VMC0900-102: RNCC: 3 | RNVC: 2
VMC0900-102: RNCC: 3 | RNVC: 2
VMC0900-102: RNCC: 5 | RNVC: 9
7545921-20: RNCC: 5 | RNVC: 9

3 Dec 1973

3040-00-411-6198
Rigid Connecting Link

004116198
14-40462-7: RNCC: 3 | RNVC: 2
14-40462-7: RNCC: 3 | RNVC: 9
14-40462-7: RNCC: 5 | RNVC: 2
14-40462-7: RNCC: 5 | RNVC: 2
14-40462-7: RNCC: 5 | RNVC: 9

22 Jan 1972

3040-00-342-8300
Bevel Gearshaft

003428300
90-2877: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-402-2198
Worm Shaft

004022198
10512788: RNCC: 3 | RNVC: 2

3 Apr 1970

3040-00-423-9886
Shaft Retaining Plate

004239886
2S2277: RNCC: 3 | RNVC: 2
6B7339: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-435-0864
Shouldered Shaft

004350864
C5A27970: RNCC: 3 | RNVC: 2
C5A27970: RNCC: 3 | RNVC: 9

14 Mar 1969

3040-00-150-7305
Counterbalance Weight

001507305
6868465-4: RNCC: 3 | RNVC: 2

30 Jul 1970

3040-00-268-0925
Control Cam

002680925
1207489-101: RNCC: 3 | RNVC: 2

18 Jul 1973

3040-00-238-0054
Mechanical Drive Housing

002380054
11642897: RNCC: 3 | RNVC: 2
2920002380054: RNCC: 5 | RNVC: 9
2920002380054: RNCC: 6 | RNVC: 9

30 Dec 1971

3040-00-150-7302
Counterbalance Weight

001507302
6868465-1: RNCC: 3 | RNVC: 2

30 Jul 1970

3040-00-164-5302
Shouldered Shaft

001645302
4B5806: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-126-6607
Shouldered Shaft

001266607
3222985: RNCC: 3 | RNVC: 2
3222985: RNCC: 5 | RNVC: 9
3222985: RNCC: 5 | RNVC: 9
N25180 PIECE 12: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-246-8250
Shouldered Shaft

002468250
3-13425-5: RNCC: 3 | RNVC: 9
3-13425-5: RNCC: 5 | RNVC: 2
3-13425-5: RNCC: 5 | RNVC: 2
3-13425-5: RNCC: 5 | RNVC: 2
3-13425-5: RNCC: 5 | RNVC: 2
3-13425-5: RNCC: C | RNVC: 1

28 Dec 1971

3040-00-275-5788
Shouldered Shaft

002755788
117D2246: RNCC: 3 | RNVC: 2

4 Aug 1973

3040-00-135-6577
Nonrotating Shaft Eye Bracket

001356577
10952747: RNCC: 3 | RNVC: 2

8 Jan 1969

3040-00-282-0605
Straight Shaft

002820605
68A640049-1001: RNCC: 3 | RNVC: 2

25 Aug 1973

3040-00-150-7303
Counterbalance Weight

001507303
6868465-2: RNCC: 3 | RNVC: 2

30 Jul 1970

3040-00-225-2288
Linear Actuating Cylinder Piston

002252288
PL2860175: RNCC: 3 | RNVC: 2
2860175: RNCC: 5 | RNVC: 2

1 Mar 1971

3040-00-272-4464
Rigid Connecting Link

002724464
4500-279: RNCC: 3 | RNVC: 2
4028-23: RNCC: 5 | RNVC: 9

30 Jul 1973

3040-00-133-4201
Straight Shaft

001334201
1561911: RNCC: 3 | RNVC: 2

6 Jan 1969

3040-00-216-1140
Rotating Shaft Eye Bracket

002161140
5-38627-4: RNCC: 3 | RNVC: 2
5-69510: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-229-6219
Rigid Connecting Link

002296219
10516122: RNCC: 3 | RNVC: 2

12 Feb 1969

3040-00-119-0901
Manual Control Lever

001190901
10512970: RNCC: 3 | RNVC: 2
10512970: RNCC: 5 | RNVC: 9

16 Oct 1968

3040-00-120-8939
Rigid Connecting Link

001208939
175182-3: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-004-1005
Rigid Connecting Link

000041005
114S3847-3: RNCC: 3 | RNVC: 2
114S3847-3: RNCC: 5 | RNVC: 2

27 May 1972

3040-00-017-9143
Tape Sheave Shaft

000179143
52D128-1: RNCC: 3 | RNVC: 2
52D128-1: RNCC: 5 | RNVC: 2
3040PL1582566: RNCC: 6 | RNVC: 9

8 May 1968

3040-00-079-2591
Spur Gearshaft

000792591
530981-3: RNCC: 3 | RNVC: 2

4 Dec 1967

3040-00-028-7439
Counterbalance Weight

000287439
223919N1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-097-6156
Rigid Connecting Link

000976156
3445269-501: RNCC: 3 | RNVC: 2
3445269-501: RNCC: 5 | RNVC: 2
3445269-501: RNCC: 5 | RNVC: 9
3445269: RNCC: D | RNVC: 9

22 May 1968

3040-00-065-5959
Shaft Collar

000655959
MBEU14230: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-072-9738
Rigid Connecting Link

000729738
2-13479-3: RNCC: 3 | RNVC: 9
2-13479-3: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-001-2139
Control Cam

000012139
1472133-1: RNCC: 3 | RNVC: 2

24 Sep 1972

3040-00-004-3679
Spur Gearshaft

000043679
530981-1: RNCC: 3 | RNVC: 2

7 Jun 1972

3040-01-656-5391
Linear Actuating Cylinder Piston

016565391
01137621: RNCC: 3 | RNVC: 2
05127052: RNCC: 5 | RNVC: 9

7 Jul 2016

3040-01-604-0823
Shaft Assembly Nrp

016040823
FAGEN105EX1: RNCC: 3 | RNVC: 2
FAGEN105EX1(A): RNCC: 5 | RNVC: 9

26 Mar 2012

3040-01-545-6513
Shouldered Shaft

015456513
0427 0491: RNCC: 3 | RNVC: 2

20 Nov 2006

3040-01-502-7046
Spur Gearshaft

015027046
23055884: RNCC: 3 | RNVC: 2

18 Nov 2002

3040-01-502-3838
Gearshaft Asssembly

015023838
23073570: RNCC: 3 | RNVC: 2

4 Nov 2002

3040-01-406-5804
Bell Crank

014065804
68A640019-1007: RNCC: 3 | RNVC: 2

6 Jan 1995

3040-01-306-6339
Shouldered Shaft

013066339
10029037-1: RNCC: 3 | RNVC: 2

27 Aug 1989

3040-01-298-7532
Shouldered Shaft

012987532
10029076: RNCC: 3 | RNVC: 2

22 Apr 1989

3040-01-298-4496
Shouldered Shaft

012984496
10029074: RNCC: 3 | RNVC: 2
10029074: RNCC: 5 | RNVC: 2

16 Apr 1989

3040-01-252-7365
Straight Shaft

012527365
1700964: RNCC: 3 | RNVC: 2
728792: RNCC: 5 | RNVC: 9

7 Apr 1987

3040-01-144-3758
Shouldered Shaft

011443758
350329-001: RNCC: 3 | RNVC: 2

18 Dec 1982

3040-00-314-9436
Shouldered Shaft

003149436
224791: RNCC: 3 | RNVC: 2

17 Jun 2002

3040-00-309-4672
Spur Gearshaft

003094672
139C6133: RNCC: 3 | RNVC: 2
139C6133: RNCC: 5 | RNVC: 2

24 Oct 1973

3040-00-283-2226
Rigid Connecting Link

002832226
4500-285: RNCC: 3 | RNVC: 2
4028-27: RNCC: 5 | RNVC: 9

26 Aug 1973

3040-00-270-7951
Rigid Connecting Link

002707951
68A640031-1001: RNCC: 3 | RNVC: 2

28 Jul 1973

3040-01-658-0650
Straight Shaft

016580650
8974K22: RNCC: 3 | RNVC: 2

12 Sep 2016

3040-01-552-6369
Special Purpose Shaft

015526369
7383858-H5257208-0012: RNCC: 3 | RNVC: 1
H547-0001-H5257208-0012: RNCC: 5 | RNVC: 1
H525-7208-12: RNCC: 5 | RNVC: 1
564-7108143-12: RNCC: 5 | RNVC: 1
564-7108143-12L1: RNCC: 5 | RNVC: 2
7383858-H5257208-0012L1: RNCC: 5 | RNVC: 2
H525-7208-12L1: RNCC: 5 | RNVC: 2
H547-0001-H5257208-0012L1: RNCC: 5 | RNVC: 2

20 Jun 2007

3040-01-548-1558
Stuffing Box Splined Shaft

015481558
7550477-G5255201-089: RNCC: 3 | RNVC: 1
7384912 PN 89: RNCC: 5 | RNVC: 1
G547-0001-G5255201-089: RNCC: 5 | RNVC: 1
G5255201-089: RNCC: 5 | RNVC: 1
G525-5201 PN 89: RNCC: 5 | RNVC: 1
7384912 PN 89L1: RNCC: 5 | RNVC: 2
G5255201-089L1: RNCC: 5 | RNVC: 2
G525-5201 PN 89L1: RNCC: 5 | RNVC: 2
G547-0001-G5255201-089L1: RNCC: 5 | RNVC: 2
7550477-G5255201-089L1: RNCC: 5 | RNVC: 2

12 Feb 2007

3040-01-547-9315
Hot Finished Splined Shaft

015479315
7550477-G5255201-083: RNCC: 3 | RNVC: 1
G525-5201 PN 83: RNCC: 5 | RNVC: 1
G547-0001-G5255201-083: RNCC: 5 | RNVC: 1
G5255201-083: RNCC: 5 | RNVC: 1
7384912 PN 83: RNCC: 5 | RNVC: 1
7550477-G5255201-083L1: RNCC: 5 | RNVC: 2
G525-5201 PN 83L1: RNCC: 5 | RNVC: 2
G5255201-083L1: RNCC: 5 | RNVC: 2
G547-0001-G5255201-083L1: RNCC: 5 | RNVC: 2
7384912 PN 83L1: RNCC: 5 | RNVC: 2

3 Feb 2007

3040-01-546-7972
Stuffing Box Splined Shaft

015467972
7550477-G5255201-092: RNCC: 3 | RNVC: 1
7384912 PN 92: RNCC: 5 | RNVC: 1
G525-5201 PN 92: RNCC: 5 | RNVC: 1
G5255201-092: RNCC: 5 | RNVC: 1
G547-0001-G5255201-092: RNCC: 5 | RNVC: 1
7550477-G5255201-092L1: RNCC: 5 | RNVC: 2
G525-5201 PN 92L1: RNCC: 5 | RNVC: 2
G5255201-092L1: RNCC: 5 | RNVC: 2
G547-0001-G5255201-092L1: RNCC: 5 | RNVC: 2
7384912 PN 92L1: RNCC: 5 | RNVC: 2

3 Jan 2007

3040-01-546-7963
Hot Finished Splined Shaft

015467963
7550477-G5255201-084: RNCC: 3 | RNVC: 1
7384912 PN 84: RNCC: 5 | RNVC: 1
G525-5201 PN 84: RNCC: 5 | RNVC: 1
G5255201-084: RNCC: 5 | RNVC: 1
G547-0001-G5255201-084: RNCC: 5 | RNVC: 1
G525-5201 PN 84L1: RNCC: 5 | RNVC: 2
G5255201-084L1: RNCC: 5 | RNVC: 2
G547-0001-G5255201-084L1: RNCC: 5 | RNVC: 2
7384912 PN 84L1: RNCC: 5 | RNVC: 2
7550477-G5255201-084L1: RNCC: 5 | RNVC: 2

3 Jan 2007

3040-01-546-7956
Linear Actuating Cylinder

015467956
7550479-3009340940-6: RNCC: 3 | RNVC: 2
G547-0003-3009340940-6: RNCC: 5 | RNVC: 1
41161: RNCC: 5 | RNVC: 1
30093-40940 ITEM 6: RNCC: 5 | RNVC: 1
3009340940-6: RNCC: 5 | RNVC: 1
30093-40940 ITEM 6D4: RNCC: 5 | RNVC: 2
3009340940-6D4: RNCC: 5 | RNVC: 2
41161D4: RNCC: 5 | RNVC: 2
7550479-3009340940-6D4: RNCC: 5 | RNVC: 2
G547-0003-3009340940-6D4: RNCC: 5 | RNVC: 2

3 Jan 2007

3040-01-546-7929
Stuffing Box Splined Shaft

015467929
7550477-G5254201-057: RNCC: 3 | RNVC: 1
G5254201-057: RNCC: 5 | RNVC: 1
G547-0001-G5254201-057: RNCC: 5 | RNVC: 1
G525-4201 PN 57: RNCC: 5 | RNVC: 1
7384908 PN 57: RNCC: 5 | RNVC: 1
7384908 PN 57L1: RNCC: 5 | RNVC: 2
7550477-G5254201-057L1: RNCC: 5 | RNVC: 2
G525-4201 PN 57L1: RNCC: 5 | RNVC: 2
G5254201-057L1: RNCC: 5 | RNVC: 2
G547-0001-G5254201-057L1: RNCC: 5 | RNVC: 2

3 Jan 2007

3040-01-546-2664
Stuffing Box Splined Shaft

015462664
7550477-G5255201-091: RNCC: 3 | RNVC: 1
7384912 PN 91: RNCC: 5 | RNVC: 1
G525-5201 PN 91: RNCC: 5 | RNVC: 1
G5255201-091: RNCC: 5 | RNVC: 1
G547-0001-G5255201-091: RNCC: 5 | RNVC: 1
G547-0001-G5255201-091L1: RNCC: 5 | RNVC: 2
7384912 PN 91L1: RNCC: 5 | RNVC: 2
7550477-G5255201-091L1: RNCC: 5 | RNVC: 2
G525-5201 PN 91L1: RNCC: 5 | RNVC: 2
G5255201-091L1: RNCC: 5 | RNVC: 2

12 Dec 2006

3040-01-546-0076
Stuffing Box Splined Shaft

015460076
7550477-G5255201-090: RNCC: 3 | RNVC: 1
G525-5201 PN 90: RNCC: 5 | RNVC: 1
G5255201-090: RNCC: 5 | RNVC: 1
G547-0001-G5255201-090: RNCC: 5 | RNVC: 1
7384912 PN 90: RNCC: 5 | RNVC: 1
7550477-G5255201-090L1: RNCC: 5 | RNVC: 2
G525-5201 PN 90L1: RNCC: 5 | RNVC: 2
7384912 PN 90L1: RNCC: 5 | RNVC: 2
G5255201-090L1: RNCC: 5 | RNVC: 2
G547-0001-G5255201-090L1: RNCC: 5 | RNVC: 2

3 Dec 2006

3040-01-701-5044
Straight Shaft

19 May 2022

3040-01-701-5041
Straight Shaft

19 May 2022

3040-01-701-4300
Straight Shaft

16 May 2022

3040-01-701-4301
Straight Shaft

16 May 2022

3040-01-701-2620
Line Actuating Cylinder Assembly

6 May 2022

3040-01-698-6219
Nonaircraft Mechanical Actuator

30 Nov 2021

3040-01-698-4647
Shouldered Shaft

18 Nov 2021

3040-01-698-4252
Straight Shaft

16 Nov 2021

3040-01-697-8307
Straight Shaft

13 Oct 2021

3040-01-697-8161
Bell Crank

13 Oct 2021

3040-01-697-6244
Linear Actuating Cylinder Assembly

016976244
521-3761: RNCC: 3 | RNVC: 2

30 Sep 2021

3040-01-697-6156
Shaft Collar

016976156
8028006: RNCC: 3 | RNVC: 1
8028006: RNCC: 5 | RNVC: 1

30 Sep 2021

3040-01-697-5497
Spur Gearshaft

016975497
12617359: RNCC: 3 | RNVC: 2

27 Sep 2021

3040-01-697-5304
Pivot Shaft Assembly

016975304
200-14692-105: RNCC: 3 | RNVC: 2
TMD-010155: RNCC: 7 | RNVC: 2

24 Sep 2021

3040-01-697-5074
Mechanical Drive Housing

016975074
356-5429: RNCC: 3 | RNVC: 2

23 Sep 2021

3040-01-697-5058
Rigid Connecting Link

016975058
3392AS488: RNCC: 3 | RNVC: 2

23 Sep 2021

3040-01-697-4853
Pawl

016974853
79501179-0: RNCC: 3 | RNVC: 2

22 Sep 2021

3040-01-697-4804
Nonrotating Shaft Eye Bracket

016974804
91FC-1366-0011: RNCC: 3 | RNVC: 2

22 Sep 2021

3040-01-697-3912
Mechanically Actuated Spindle

016973912
A-801-12547-24: RNCC: 3 | RNVC: 2
805-12347-503-4: RNCC: 5 | RNVC: 2

17 Sep 2021

3040-01-697-3838
Body Hub

016973838
3635-20: RNCC: 3 | RNVC: 2
3635-20: RNCC: D | RNVC: 9

16 Sep 2021

3040-01-697-3833
Piston Rod Guide

016973833
3999-1: RNCC: 3 | RNVC: 2

16 Sep 2021

3040-01-697-3530
Mechanically Actuated Spindle

016973530
390758: RNCC: 3 | RNVC: 2
390758 REVISION H1: RNCC: D | RNVC: 9

15 Sep 2021

3040-01-697-2926
Mechanical Drive Housing

016972926
A40473-1: RNCC: 3 | RNVC: 2

13 Sep 2021

3040-01-697-2818
Linear Actuating Cylinder Cap

016972818
11188SP: RNCC: 3 | RNVC: 2

10 Sep 2021

3040-01-697-2695
Piston Rod Guide

016972695
CC70682-001: RNCC: 3 | RNVC: 2
CC70679-ITEM NO-3: RNCC: C | RNVC: 1
CC70679: RNCC: D | RNVC: 9

10 Sep 2021

3040-01-697-2506
Brake Backing Plate

016972506
19022933: RNCC: 3 | RNVC: 2

9 Sep 2021

3040-01-697-2498
Fan Back Plate

016972498
19022935: RNCC: 3 | RNVC: 2

9 Sep 2021

3040-01-697-2170
Spur Gearshaft

016972170
4525047: RNCC: 3 | RNVC: 2

8 Sep 2021

3040-01-697-2034
Shouldered Shaft

016972034
845-6690372-ITEM NO-13: RNCC: 3 | RNVC: 2
2640-682-10-ITEM NO-13: RNCC: 5 | RNVC: 2

8 Sep 2021

3040-01-697-1897
Spur Gearshaft

016971897
845-8616950-ITEM NUMBER 36: RNCC: 3 | RNVC: 2
2644-752-01-ITEM NUMBER 36: RNCC: 5 | RNVC: 2
8616950: RNCC: D | RNVC: 9

7 Sep 2021

3040-01-697-1877
Spur Gearshaft

016971877
845-8616950-ITEM NUMBER 35: RNCC: 3 | RNVC: 2
2644-752-01 ITEM NUMBER 35: RNCC: 5 | RNVC: 2
8616950: RNCC: D | RNVC: 9

7 Sep 2021

3040-01-697-1841
Rigid Connecting Link

016971841
1001517-1: RNCC: 3 | RNVC: 2

7 Sep 2021

3040-01-697-1233
Counterbalance Weight

016971233
142623-101: RNCC: 3 | RNVC: 2
FSSFEED-1: RNCC: 5 | RNVC: 9
11027D4023-1: RNCC: 7 | RNVC: 2

2 Sep 2021

3040-01-697-1175
Linear Actuating Cylinder Piston

016971175
05121483: RNCC: 3 | RNVC: 2

2 Sep 2021

3040-01-697-1149
Shaft Collar

016971149
CR2C-100-S: RNCC: 3 | RNVC: 2
9633T19: RNCC: 5 | RNVC: 2

1 Sep 2021

3040-01-697-0573
Straight Shaft Assembly

016970573
13740695-1: RNCC: 3 | RNVC: 2

30 Aug 2021

3040-01-697-0329
Nonrotating Shaft Eye Bracket

016970329
7626359: RNCC: 3 | RNVC: 2

28 Aug 2021

3040-01-697-0266
Joint

016970266
05164996: RNCC: 3 | RNVC: 2

28 Aug 2021

3040-01-697-0238
Breather

016970238
5L306: RNCC: 3 | RNVC: 9
5L306: RNCC: 5 | RNVC: 2

28 Aug 2021

3040-01-697-0113
Nonaircraft Mechanical Actuator

016970113
10F39SNV95 R7: RNCC: 3 | RNVC: 2
10F39SNV95 R7: RNCC: 5 | RNVC: 2
10F39SNV95 R7: RNCC: 5 | RNVC: 2

27 Aug 2021

3040-01-697-0041
Counterbalance Weight

016970041
141732-101: RNCC: 3 | RNVC: 2

27 Aug 2021

3040-01-697-0028
Counterbalance Weight

016970028
141996-101: RNCC: 3 | RNVC: 2
11027D4023: RNCC: 7 | RNVC: 2

27 Aug 2021

3040-01-696-9859
Straight Shaft

016969859
05121486: RNCC: 3 | RNVC: 2

26 Aug 2021

3040-01-696-9857
Straight Shaft

016969857
05156991: RNCC: 3 | RNVC: 2

26 Aug 2021

3040-01-696-9697
Speedometer-Tachometer Drive Adapter

016969697
12596785: RNCC: 3 | RNVC: 2

26 Aug 2021

3040-01-696-9689
Speedometer-Tachometer Drive Adapter

016969689
12596786: RNCC: 3 | RNVC: 2

26 Aug 2021

3040-01-696-9645
Straight Shaft

016969645
E312461: RNCC: 3 | RNVC: 2

26 Aug 2021

3040-01-696-9056
Mechanically Actuated Spindle

016969056
L0500738-010: RNCC: 3 | RNVC: 2

24 Aug 2021

3040-01-696-8894
Control Cam

016968894
4419259: RNCC: 3 | RNVC: 2

23 Aug 2021

3040-01-696-8890
Shouldered Shaft

016968890
GS24265-25: RNCC: 3 | RNVC: 2

23 Aug 2021

3040-01-696-8880
Linear Actuating Cylinder Piston Rod

016968880
CC87716-001: RNCC: 3 | RNVC: 2
CC73593-ITEM NO-22: RNCC: 5 | RNVC: 2
CC73593/ITEM 22 SHEET 1: RNCC: D | RNVC: 9

23 Aug 2021

3040-01-696-8871
Shouldered Axle

016968871
4534002: RNCC: 3 | RNVC: 2

23 Aug 2021

3040-01-696-8854
Mechanical Drive Housing

016968854
HAN8600-1: RNCC: 3 | RNVC: 2
A-286-335-ITEM NO-19: RNCC: 5 | RNVC: 1

23 Aug 2021

3040-01-696-8827
Mechanical Drive Housing

016968827
HAN8610-1: RNCC: 3 | RNVC: 2
A-286-335-ITEM NO-30: RNCC: 5 | RNVC: 1

23 Aug 2021

3040-01-696-8770
Linear Actuating Cylinder Piston Rod

016968770
06259730: RNCC: 3 | RNVC: 2

23 Aug 2021

3040-01-696-8738
Linear Actuating Cylinder Piston Rod

016968738
06194858: RNCC: 3 | RNVC: 2

23 Aug 2021

3040-01-696-8717
Straight Shaft

016968717
12617553: RNCC: 3 | RNVC: 2

23 Aug 2021

3040-01-696-8685
Shouldered Shaft

016968685
HAN8598-1: RNCC: 3 | RNVC: 2
A-286-335-ITEM NO-40: RNCC: C | RNVC: 1

20 Aug 2021

3040-01-696-8587
Linear Actuating Cylinder Piston Rod

016968587
CC87706-001: RNCC: 3 | RNVC: 2
CC73593-ITEM NO-2: RNCC: 5 | RNVC: 2
CC73593/ITEM 2 SHEET 1: RNCC: D | RNVC: 9

20 Aug 2021

3040-01-696-8349
Shouldered Shaft

016968349
12618131: RNCC: 3 | RNVC: 2

19 Aug 2021

3040-01-696-8074
Nonaircraft Mechanical Actuator

016968074
261K276H01: RNCC: 3 | RNVC: 2
261K276H01: RNCC: 3 | RNVC: 2

18 Aug 2021

3040-01-696-7979
Straight Shaft

016967979
12596845: RNCC: 3 | RNVC: 2

18 Aug 2021

3040-01-696-7851
Shouldered Shaft

016967851
70199716-9: RNCC: 3 | RNVC: 2
70199716 REV B: RNCC: D | RNVC: 9
70199713 REV H SHT 6 FIND NO.14: RNCC: D | RNVC: 9

17 Aug 2021

3040-01-696-7533
Straight Shaft

016967533
2498-00-313-PART NO-7 SZ-3 TY-1: RNCC: 3 | RNVC: 1
2498-00-313/SHEET 3 FIND 7: RNCC: 5 | RNVC: 1

16 Aug 2021

3040-01-696-7301
Shaft Retaining Plate

016967301
3890AS005058-01: RNCC: 3 | RNVC: 2
3890AS005058: RNCC: D | RNVC: 9

13 Aug 2021

3040-01-696-7298
Shaft Retaining Plate

016967298
3890AS005060-01: RNCC: 3 | RNVC: 2
3890AS005060: RNCC: D | RNVC: 9

13 Aug 2021

3040-01-696-7300
Shaft Retaining Plate

016967300
3890AS005059-01: RNCC: 3 | RNVC: 2
3890AS005059: RNCC: D | RNVC: 9

13 Aug 2021

3040-01-696-7246
Shouldered Shaft

016967246
TUGHPU6-016: RNCC: 3 | RNVC: 2

12 Aug 2021

3040-01-696-7196
Shaft Idler

016967196
TUGHPU6-017: RNCC: 3 | RNVC: 2

12 Aug 2021

3040-01-696-7177
Nonaircraft Mechanical Actuator

016967177
42266: RNCC: 3 | RNVC: 2
D-WK-879-3/ REV N/ PC 9/ NOTE 11: RNCC: C | RNVC: 1
42266/ REV 1: RNCC: D | RNVC: 9
LINE01- GSX50-1001-XXX-AB6-268-X: RNCC: D | RNVC: 9
LINE02- H-XT-42266: RNCC: D | RNVC: 9

12 Aug 2021

3040-01-696-7149
Shouldered Shaft

016967149
TUGHPU6-010: RNCC: 3 | RNVC: 2

12 Aug 2021

3040-01-696-6701
Straight Shaft

016966701
1500LLB: RNCC: 3 | RNVC: 2

10 Aug 2021

3040-01-696-6694
Straight Shaft

016966694
THS1500LL: RNCC: 3 | RNVC: 2

10 Aug 2021

3040-01-696-6589
Hydraulic Control Assembly

016966589
TUGHPU6-056: RNCC: 3 | RNVC: 2

10 Aug 2021

3040-01-696-6414
Flexible Drive Shaft

016966414
820-8508017PCGRH-T103: RNCC: 3 | RNVC: 1

9 Aug 2021

3040-01-696-6271
Linear Actuating Cylinder Head

016966271
540-80081 S: RNCC: 3 | RNVC: 2

6 Aug 2021

3040-01-696-6105
Control Cam

016966105
971100: RNCC: 3 | RNVC: 1

5 Aug 2021

3040-01-696-6108
Control Cam

016966108
971101: RNCC: 3 | RNVC: 1

5 Aug 2021

3040-01-696-5992
Linear Actuating Cylinder

016965992
HD2030: RNCC: 3 | RNVC: 2
HD2000 REV E-9: RNCC: D | RNVC: 9

5 Aug 2021

3040-01-696-5373
Nonaircraft Mechanical Actuator

016965373
2HB10G0E0188-038NRADD1C10: RNCC: 3 | RNVC: 2

3 Aug 2021

3040-01-696-5018
Breather

016965018
123SME90237-67: RNCC: 3 | RNVC: 2
123SME90237: RNCC: D | RNVC: 9

30 Jul 2021

3040-01-696-4827
Rigid Connecting Link

016964827
XXDA-130 ITEM 99 X1: RNCC: 3 | RNVC: 2
XXDA-130: RNCC: D | RNVC: 9

29 Jul 2021

3040-01-696-4747
Straight Shaft

016964747
12596229: RNCC: 3 | RNVC: 2

29 Jul 2021

3040-01-696-4547
Shouldered Shaft

016964547
12593915: RNCC: 3 | RNVC: 2

28 Jul 2021

3040-01-696-4413
Shouldered Shaft

016964413
60270056-00: RNCC: 3 | RNVC: 2
ASSY60270056: RNCC: D | RNVC: 9

27 Jul 2021

3040-01-696-4404
Straight Shaft

016964404
60260702-00: RNCC: 3 | RNVC: 2
DDWG60260702: RNCC: D | RNVC: 9

27 Jul 2021

3040-01-696-4355
Shouldered Shaft

016964355
60270055-00: RNCC: 3 | RNVC: 2
ASSY60270055: RNCC: D | RNVC: 9

27 Jul 2021

3040-01-696-4246
Shouldered Shaft

016964246
60268423-00: RNCC: 3 | RNVC: 2
DDWG60268423: RNCC: D | RNVC: 9

27 Jul 2021

3040-01-696-4072
Nonaircraft Mechanical Actuator

016964072
522-0-14-012-101: RNCC: 3 | RNVC: 2

26 Jul 2021

3040-01-696-3261
Planetary Gears Carrier

016963261
3298V1244: RNCC: 3 | RNVC: 2

21 Jul 2021

3040-01-696-3244
Shouldered Shaft

016963244
3297C1797: RNCC: 3 | RNVC: 2

21 Jul 2021

3040-01-696-3019
Linear Actuating Cylinder Piston

016963019
3152163: RNCC: 3 | RNVC: 2

21 Jul 2021

3040-01-696-2962
Shouldered Shaft

016962962
GS-5755: RNCC: 3 | RNVC: 2
GS-5754: RNCC: D | RNVC: 9

20 Jul 2021

3040-01-696-2712
Worm Shaft

016962712
731788: RNCC: 3 | RNVC: 2
731788: RNCC: 5 | RNVC: 2

20 Jul 2021

3040-01-696-2649
Pneumatic Actuator Cylinder Housing

016962649
3261S1085: RNCC: 3 | RNVC: 2

19 Jul 2021

3040-01-696-2613
Nonaircraft Mechanical Actuator

016962613
85104208: RNCC: 3 | RNVC: 2
85113755: RNCC: 5 | RNVC: 9

19 Jul 2021

3040-01-696-2450
Mechanical Drive Housing Part

016962450
M32501: RNCC: 3 | RNVC: 2

19 Jul 2021

3040-01-696-2173
Mechanically Actuated Spindle

016962173
19023047: RNCC: 3 | RNVC: 2

15 Jul 2021

3040-01-696-2078
Multiple Disk Brake

016962078
2215B021: RNCC: 3 | RNVC: 2

15 Jul 2021

3040-01-696-1701
Brake Shoe

016961701
H250T1-6000-6RH: RNCC: 3 | RNVC: 2

14 Jul 2021

3040-01-696-1123
Rigid Connecting Link

016961123
113T1957-1: RNCC: 3 | RNVC: 1

11 Jul 2021

3040-01-696-0732
Manual Control Lever

016960732
OZ150-20LHOP: RNCC: 3 | RNVC: 9

8 Jul 2021

3040-01-696-0643
Straight Axle

016960643
RSTNA14003: RNCC: 3 | RNVC: 2
RSTNA18008-IPB: RNCC: D | RNVC: 9

8 Jul 2021

3040-01-696-0264
Straight Shaft

016960264
800057: RNCC: 3 | RNVC: 2
800057: RNCC: 5 | RNVC: 9

7 Jul 2021

3040-01-695-9841
Spur Gearshaft

016959841
8365300: RNCC: 3 | RNVC: 1
8365300: RNCC: 5 | RNVC: 1

1 Jul 2021

3040-01-695-9714
Rigid Connecting Link

016959714
ML5-19.00-1: RNCC: 3 | RNVC: 2
GS-5754: RNCC: D | RNVC: 9

1 Jul 2021

3040-01-695-9477
Rigid Connecting Link

016959477
23642373: RNCC: 3 | RNVC: 2

30 Jun 2021

3040-01-695-9471
Rigid Connecting Link

016959471
23642372: RNCC: 3 | RNVC: 2

30 Jun 2021

3040-01-695-9162
Rigid Connecting Link

016959162
GS-5754: RNCC: 3 | RNVC: 2

29 Jun 2021

3040-01-695-9095
Rigid Connecting Link

016959095
ML9-19.00-1: RNCC: 3 | RNVC: 2
GS-5754: RNCC: D | RNVC: 9

29 Jun 2021

3040-01-695-9094
Housing Adapter

016959094
06202-02301-052: RNCC: 3 | RNVC: 2

29 Jun 2021

3040-01-695-8401
Ball Joint

016958401
2023610: RNCC: 3 | RNVC: 2

25 Jun 2021

3040-01-695-8185
Shouldered Shaft

016958185
60257819-00: RNCC: 3 | RNVC: 2

24 Jun 2021

3040-01-695-7229
Straight Shaft

016957229
12596846: RNCC: 3 | RNVC: 2

22 Jun 2021

3040-01-695-6493
Housing Adapter

016956493
13012029: RNCC: 3 | RNVC: 2
3012029: RNCC: 3 | RNVC: 9
0500113: RNCC: D | RNVC: 9

16 Jun 2021

3040-01-695-6495
Housing Adapter

016956495
182669-0301: RNCC: 3 | RNVC: 1
283852-0001-ITEM NO-14: RNCC: 5 | RNVC: 1
182669-0301L1: RNCC: 5 | RNVC: 2
283852-0001-ITEM NO-14L1: RNCC: 5 | RNVC: 2
283852-0001: RNCC: D | RNVC: 9

16 Jun 2021

3040-01-695-6268
Disk Brake Shoe Set

016956268
224762: RNCC: 3 | RNVC: 1

15 Jun 2021

3040-01-695-5866
Ball Joint

016955866
60645K441: RNCC: 3 | RNVC: 2
1109200115: RNCC: 7 | RNVC: 2

14 Jun 2021

3040-01-695-5469
Shouldered Shaft

016955469
8D8809-3: RNCC: 3 | RNVC: 9
8D8809-3: RNCC: C | RNVC: 1
8D8825-5: RNCC: D | RNVC: 9

11 Jun 2021

3040-01-695-5401
Linear Actuating Cylinder Assembly

016955401
566-6985426-PN-A6: RNCC: 3 | RNVC: 1
H621-0102-PN-A6: RNCC: 5 | RNVC: 1
H621-0102-PN-A6L1: RNCC: 5 | RNVC: 2
566-6985426-PN-A6L1: RNCC: 5 | RNVC: 2
6985426: RNCC: D | RNVC: 9

10 Jun 2021

3040-01-695-5366
Rotary Actuating Cylinder Assembly

016955366
7583A: RNCC: 3 | RNVC: 1
7583-41505: RNCC: 5 | RNVC: 1
7583-41505TR: RNCC: 5 | RNVC: 2
7583ATR: RNCC: 5 | RNVC: 2

10 Jun 2021

3040-01-695-4421
Lever Fitting

016954421
4F69248-101A: RNCC: 3 | RNVC: 2

7 Jun 2021

3040-01-695-4406
Rigid Connecting Link

016954406
4F32260-109A: RNCC: 3 | RNVC: 2

7 Jun 2021

3040-01-695-4385
Rigid Connecting Link

016954385
4F69253-103A: RNCC: 3 | RNVC: 2

7 Jun 2021

3040-01-695-4376
Shouldered Shaft Assembly

016954376
4F69293-101A: RNCC: 3 | RNVC: 2

7 Jun 2021

3040-01-695-3949
Nonaircraft Mechanical Actuator

016953949
322B4223: RNCC: 3 | RNVC: 2

3 Jun 2021

3040-01-695-3838
Flexible Drive Shaft

016953838
FR250SHRCC14400: RNCC: 3 | RNVC: 2
PL H20065W001 FIND NO 0063: RNCC: 5 | RNVC: 2

3 Jun 2021

3040-01-695-3418
Control Cam

016953418
9129-0530-01: RNCC: 3 | RNVC: 2

1 Jun 2021

3040-01-695-3399
Bell Crank Support

016953399
7-511524009-101: RNCC: 3 | RNVC: 2

1 Jun 2021

3040-01-695-3395
Housing Adapter

016953395
IP-LC-A4531: RNCC: 3 | RNVC: 2

1 Jun 2021

3040-01-695-1954
Accumulator Cap

016951954
41624: RNCC: 3 | RNVC: 1
600-41620-ITEM-4: RNCC: 5 | RNVC: 1
41624L1: RNCC: 5 | RNVC: 2
600-41620-ITEM-4: RNCC: 5 | RNVC: 2
600-41620/ SHEET 1 ITEM 4: RNCC: D | RNVC: 9

20 May 2021

3040-01-695-1145
Mixer Paddle

016951145
428 190 207: RNCC: 3 | RNVC: 2
1798801 LINE NO. 9: RNCC: 5 | RNVC: 1

14 May 2021

3040-01-695-1122
Mixer Paddle

016951122
428 190 208: RNCC: 3 | RNVC: 2
1798801 LINE NO. 10: RNCC: 5 | RNVC: 2

14 May 2021

3040-01-695-0884
Straight Shaft

016950884
428 140 422: RNCC: 3 | RNVC: 2
1798801 LINE NO. 5: RNCC: C | RNVC: 1

13 May 2021

3040-01-695-0680
Paddle Arm

016950680
428 180 160: RNCC: 3 | RNVC: 2
1798801 LINE NO. 6: RNCC: C | RNVC: 1

12 May 2021

3040-01-695-0693
Paddle Arm

016950693
428 180 161: RNCC: 3 | RNVC: 2
1798801 LINE NO. 7: RNCC: C | RNVC: 1

12 May 2021

3040-01-695-0556
Linear Actuating Cylinder Assembly

016950556
566-6985426-PN-A5: RNCC: 3 | RNVC: 1
H621-0102-PN-A5: RNCC: 5 | RNVC: 1
566-6985426-PN-A5L1: RNCC: 5 | RNVC: 2
H621-0102-PN-A5L1: RNCC: 5 | RNVC: 2

12 May 2021

3040-01-695-0450
Accumulator Cap

016950450
41625: RNCC: 3 | RNVC: 1
41625L1: RNCC: 5 | RNVC: 2
600-41620 ITEM 5L1: RNCC: 5 | RNVC: 2
600-41620 ITEM 5: RNCC: 5 | RNVC: 2

11 May 2021

3040-01-695-0436
Mixer Paddle

016950436
428 190 206: RNCC: 3 | RNVC: 2
1798801 LINE NO. 8: RNCC: C | RNVC: 1

11 May 2021

3040-01-695-0096
Spline Adapter

016950096
E8CR109-031: RNCC: 3 | RNVC: 2
336473-001: RNCC: 3 | RNVC: 2
12647413: RNCC: 7 | RNVC: 2

10 May 2021

3040-01-694-9895
Rigid Connecting Link

016949895
12618214: RNCC: 3 | RNVC: 2

7 May 2021

3040-01-694-9130
Nonrotating Shaft Eye Bracket

016949130
10085437: RNCC: 3 | RNVC: 2

4 May 2021

3040-01-694-9020
Nonrotating Shaft Eye Bracket

016949020
10085436: RNCC: 3 | RNVC: 2

3 May 2021

3040-01-694-8457
Linear Actuating Cylinder Piston

016948457
213-00: RNCC: 3 | RNVC: 2
40083-8/ SHT 1 PC NO 23: RNCC: 5 | RNVC: 1

28 Apr 2021

3040-01-694-8411
Rigid Connecting Link

016948411
JE-1514 REV A PC NO. 16: RNCC: 3 | RNVC: 2
JE-1514 REV A DET 14-C: RNCC: 5 | RNVC: 1

28 Apr 2021

3040-01-694-7988
Manual Control Lever

016947988
110829: RNCC: 3 | RNVC: 2

26 Apr 2021

3040-01-694-7782
Cylinder Support

016947782
57-50874-5: RNCC: 3 | RNVC: 2

23 Apr 2021

3040-01-694-7663
Rigid Connecting Link

016947663
8M0109594: RNCC: 3 | RNVC: 2

22 Apr 2021

3040-01-694-7643
Straight Shaft

016947643
12617854: RNCC: 3 | RNVC: 2

22 Apr 2021

3040-01-694-7642
Straight Shaft

016947642
12617855: RNCC: 3 | RNVC: 2

22 Apr 2021

3040-01-694-7475
Mechanically Actuated Spindle

016947475
803-8397269 PC 95 MOD 66MM: RNCC: 3 | RNVC: 2
803-6397269 PC 95 MOD 66MM: RNCC: 3 | RNVC: 2
8397269: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9

21 Apr 2021

3040-01-694-7294
Shouldered Shaft

016947294
CL35005: RNCC: 3 | RNVC: 2
5110102P01: RNCC: 5 | RNVC: 2
5540102 REV A IT 5110102P01: RNCC: 5 | RNVC: 2

20 Apr 2021

3040-01-694-6592
Mechanical Drive Housing

016946592
3862087-7: RNCC: 3 | RNVC: 2

15 Apr 2021

3040-01-694-6352
Flexible Casing End Fitting

016946352
W084820972: RNCC: 3 | RNVC: 2
DAAK002585/ REV C SEQ 008: RNCC: 5 | RNVC: 1

14 Apr 2021

3040-01-694-6099
Shouldered Shaft

016946099
A-57482-10: RNCC: 3 | RNVC: 2
DG-AP-0244-01/ SHT 4 ITEM NO 5: RNCC: 5 | RNVC: 1

13 Apr 2021

3040-01-694-5973
Mechanically Actuated Spindle

016945973
803-6397269 PC 122 MOD 66MM: RNCC: 3 | RNVC: 2
DB071719/SHT 7/DET 46-A: RNCC: C | RNVC: 1
803-6397269: RNCC: D | RNVC: 9

12 Apr 2021

3040-01-694-5841
Shaft Idler

016945841
8418365: RNCC: 3 | RNVC: 2
8418365: RNCC: 5 | RNVC: 2

12 Apr 2021

3040-01-694-5399
Mechanical Drive Housing

016945399
754-6407378: RNCC: 3 | RNVC: 2

8 Apr 2021

3040-01-694-5123
Mechanical Drive Housing Part

016945123
53001372-1: RNCC: 3 | RNVC: 1

7 Apr 2021

3040-01-694-5063
Rigid Connecting Link

016945063
70400-22268-102: RNCC: 3 | RNVC: 2
70400-22268: RNCC: D | RNVC: 9

6 Apr 2021

3040-01-694-5061
Extension Shaft

016945061
VZ18: RNCC: 3 | RNVC: 2

6 Apr 2021

3040-01-694-5045
Linear Actuating Cylinder Assembly

016945045
40000800M02: RNCC: 3 | RNVC: 2

6 Apr 2021

3040-01-694-4822
Linear Actuating Cylinder Assembly Parts Kit

016944822
LCS1720RVS-002: RNCC: 3 | RNVC: 2

5 Apr 2021

3040-01-694-4717
Pneumatic Control Assembly

016944717
8224197-4: RNCC: 3 | RNVC: 2
8224197: RNCC: D | RNVC: 9

5 Apr 2021

3040-01-694-4479
Mechanical Power Transmission Equipment Installation Kit

016944479
16612789: RNCC: 3 | RNVC: 2

2 Apr 2021

3040-01-694-3473
Crank Parts List

016943473
16612801: RNCC: 3 | RNVC: 2

29 Mar 2021

3040-01-694-2524
Shaft Retaining Plate

016942524
845-4687407-ASSEMBLY-317: RNCC: 3 | RNVC: 2
501-8753180-PN-22: RNCC: 5 | RNVC: 1
264179203-0317: RNCC: C | RNVC: 1
H525-7416-PN-22: RNCC: C | RNVC: 1

24 Mar 2021

3040-01-694-2327
Manual Control Lever Assembly

016942327
803-5001003-X9XX-158: RNCC: 3 | RNVC: 2
5001003/ REV M SHEET 22 FIND 158: RNCC: D | RNVC: 9

23 Mar 2021

3040-01-694-2262
Nonaircraft Mechanical Actuator

016942262
1100825: RNCC: 3 | RNVC: 2

23 Mar 2021

3040-01-694-1803
Assembly Cylinder

016941803
173609-211: RNCC: 3 | RNVC: 2

22 Mar 2021

3040-01-694-1805
Assembly Cylinder

016941805
4173AS0151-1: RNCC: 3 | RNVC: 2

22 Mar 2021

3040-01-694-1954
Linear Actuating Cylinder Assembly

016941954
8603366: RNCC: 3 | RNVC: 2
7377923-5: RNCC: 5 | RNVC: 2

22 Mar 2021

3040-01-694-1804
Assembly Cylinder

016941804
4173AS0152-1: RNCC: 3 | RNVC: 2

22 Mar 2021

3040-01-694-1782
Shouldered Shaft Assembly

016941782
7377575: RNCC: 3 | RNVC: 2

19 Mar 2021

3040-01-694-1674
Push-Pull Control Assembly Parts Kit

016941674
8M0213292: RNCC: 3 | RNVC: 2
8M0097267: RNCC: 5 | RNVC: 9

19 Mar 2021

3040-01-693-9925
Spur Gearshaft

016939925
375-0150: RNCC: 3 | RNVC: 2

12 Mar 2021

3040-01-693-9913
Multiple Gears Gearshaft

016939913
264-0111: RNCC: 3 | RNVC: 2

12 Mar 2021

3040-01-693-9342
Rigid Connecting Link

016939342
1109200067: RNCC: 3 | RNVC: 2

11 Mar 2021

3040-01-693-9231
Linear Actuating Cylinder

016939231
8590497: RNCC: 3 | RNVC: 2
7377923-1: RNCC: 5 | RNVC: 1

10 Mar 2021

Load More Results