What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 158 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 158 of 300

3040-01-192-6082
Rotating Shaft Eye Bracket

011926082
86238-50NS: RNCC: 3 | RNVC: 2
86238-50NS: RNCC: 5 | RNVC: 9

23 Oct 1984

3040-01-191-8940
Rigid Connecting Link

011918940
75A417204-2003: RNCC: 3 | RNVC: 2
75A417204-2003: RNCC: 3 | RNVC: 9
75A417204-2003: RNCC: 5 | RNVC: 2
75A417204: RNCC: D | RNVC: 9

13 Oct 1984

3040-01-160-0829
Shouldered Shaft

011600829
071693-0001: RNCC: 3 | RNVC: 2
071693: RNCC: D | RNVC: 9

17 Aug 1983

3040-01-186-1661
Brake Disc

011861661
249792: RNCC: 3 | RNVC: 2

8 Aug 1984

3040-01-174-3698
Shouldered Shaft

011743698
P12612147: RNCC: 3 | RNVC: 9
10560042 ITEM 6: RNCC: 5 | RNVC: 9
10560042 ITEM 6: RNCC: C | RNVC: 1
P12612147: RNCC: C | RNVC: 1
10560042: RNCC: D | RNVC: 9

16 Mar 1984

3040-01-185-3199
Rigid Connecting Link

011853199
406-001-025-101: RNCC: 3 | RNVC: 2

27 Jul 1984

3040-01-187-3122
Counterbalance Weight

011873122
301-332-443-0: RNCC: 3 | RNVC: 2
301-332-454-0: RNCC: 5 | RNVC: 2
301-332-443-0: RNCC: 5 | RNVC: 9
301-332-454-0: RNCC: 5 | RNVC: 9

21 Aug 1984

3040-01-205-7751
Push-Pull Control Assembly

012057751
1601020-002: RNCC: 3 | RNVC: 2
LE161-0022-009: RNCC: 7 | RNVC: 2

11 Apr 1985

3040-01-174-0832
Linear Actuating Cylinder

011740832
G101432: RNCC: 3 | RNVC: 2

14 Mar 1984

3040-01-185-8915
Rigid Connecting Link

011858915
406-010-413-115: RNCC: 3 | RNVC: 2
406-010-413-103: RNCC: 5 | RNVC: 9

5 Aug 1984

3040-01-196-6160
Rigid Connecting Link

011966160
123C40202-601: RNCC: 3 | RNVC: 2
123C40202-601: RNCC: 5 | RNVC: 9

12 Dec 1984

3040-01-196-3822
Mechanical Drive Housing

011963822
515-4457071 ITEM 101: RNCC: 3 | RNVC: 2
6002-108 ITEM 101: RNCC: 5 | RNVC: 2
4457071: RNCC: D | RNVC: 9

11 Dec 1984

3040-01-178-5904
Rigid Connecting Link

011785904
L3300109-001: RNCC: 3 | RNVC: 2

7 May 1984

3040-01-179-5079
Shouldered Shaft

011795079
P204424: RNCC: 3 | RNVC: 2
P204424N: RNCC: 3 | RNVC: 2
P204424: RNCC: 3 | RNVC: 9
P204424N: RNCC: 5 | RNVC: 9

19 May 1984

3040-01-191-8936
Rigid Connecting Link

011918936
7566-6208: RNCC: 3 | RNVC: 2
SR11578A-6208: RNCC: 3 | RNVC: 2
LE162-0056-6208: RNCC: 5 | RNVC: 2
LE162-0056: RNCC: 7 | RNVC: 1

13 Oct 1984

3040-01-177-8744
Mechanical Drive Housing

011778744
RE-F102101: RNCC: 3 | RNVC: 2

28 Apr 1984

3040-01-179-4186
Shouldered Shaft

011794186
H14581: RNCC: 3 | RNVC: 9
H15386: RNCC: 5 | RNVC: 2
15386: RNCC: 5 | RNVC: 9
15386: RNCC: 5 | RNVC: 9
H14581: RNCC: C | RNVC: 1

18 May 1984

3040-01-187-3127
Counterbalance Weight

011873127
301-332-437-0: RNCC: 3 | RNVC: 2
301-332-437-0: RNCC: 5 | RNVC: 2
301-332-448-0: RNCC: 5 | RNVC: 2
301-332-437-0: RNCC: 5 | RNVC: 9

21 Aug 1984

3040-01-191-0716
Rigid Connecting Link

011910716
7543-6202: RNCC: 3 | RNVC: 2
KSL127600BX-6202: RNCC: 5 | RNVC: 2
SR10726A-6202: RNCC: 5 | RNVC: 2
LE162-0023-6202: RNCC: 7 | RNVC: 2

5 Feb 2004

3040-01-175-1159
Shouldered Shaft

011751159
922536C1: RNCC: 3 | RNVC: 2
922536C1: RNCC: 3 | RNVC: 9

27 Mar 1984

3040-01-187-4150
Shaft Splined

011874150
718627: RNCC: 3 | RNVC: 2

22 Aug 1984

3040-01-196-9171
Manual Control Lever

011969171
A-14048 PIECE 12: RNCC: 3 | RNVC: 2
A-14048 PIECE 12: RNCC: 5 | RNVC: 9
SPO31791: RNCC: 5 | RNVC: 9
E029669: RNCC: 5 | RNVC: 9

15 Dec 1984

3040-01-202-1748
Linear Actuating Cylinder Piston Rod

012021748
SS522-2113490 PIECE 74: RNCC: 3 | RNVC: 2

27 Feb 1985

3040-01-190-3844
Rigid Connecting Link

011903844
7514-6001: RNCC: 3 | RNVC: 2
SR10784A-6001: RNCC: 5 | RNVC: 2
7014-161: RNCC: 5 | RNVC: 2
LE162-0002-6001: RNCC: 5 | RNVC: 2
LE162-0002: RNCC: D | RNVC: 9

26 Sep 1984

3040-01-195-1898
Shouldered Shaft

011951898
29-00198-001: RNCC: 3 | RNVC: 2
29-00198-001: RNCC: 5 | RNVC: 2

24 Nov 1984

3040-01-178-3536
Manual Control Lever

011783536
044-07537-000: RNCC: 3 | RNVC: 2
44-7537: RNCC: 5 | RNVC: 9
044-07537-000: RNCC: C | RNVC: 1

4 May 1984

3040-01-196-4710
Mechanical Drive Housing

011964710
6002-108 ITEM 108: RNCC: 3 | RNVC: 2
515-4457071 ITEM 108: RNCC: 5 | RNVC: 9
6002-108 ITEM 108: RNCC: 5 | RNVC: 9
515-4457071: RNCC: D | RNVC: 9
6002-108: RNCC: D | RNVC: 9

12 Dec 1984

3040-01-147-3535
Piston Ring

011473535
1534 AS 297: RNCC: 3 | RNVC: 2
1534AS297: RNCC: 5 | RNVC: 2
1534AS297: RNCC: 5 | RNVC: 2
1534AS297: RNCC: 5 | RNVC: 2
1534AS297: RNCC: 5 | RNVC: 2
C013494-1: RNCC: 5 | RNVC: 9
1534AS297: RNCC: 5 | RNVC: 9
C013494-1: RNCC: 5 | RNVC: 9
10372590: RNCC: 6 | RNVC: 9

15 Feb 1983

3040-01-162-8753
Shouldered Shaft

011628753
2D2-208 ITEM 4: RNCC: 3 | RNVC: 2
2C1-406: RNCC: 5 | RNVC: 2

23 Sep 1983

3040-01-139-1892
Linear Actuating Cylinder Piston Rod

011391892
H47093: RNCC: 3 | RNVC: 2
H47093: RNCC: 3 | RNVC: 9
H47093: RNCC: 5 | RNVC: 9
33423658: RNCC: C | RNVC: 1
H47093: RNCC: C | RNVC: 1

26 Sep 1982

3040-01-152-3015
Brake Disc

011523015
K80282-2: RNCC: 3 | RNVC: 2
K80139-1: RNCC: 5 | RNVC: 9
K80179-1: RNCC: 5 | RNVC: 9
644627107: RNCC: 5 | RNVC: 9

30 Apr 1983

3040-01-168-7059
Remote Control Lever

011687059
16Y422-23: RNCC: 3 | RNVC: 2

21 Dec 1983

3040-01-146-0028
Shaft Retaining Plate

011460028
3031752: RNCC: 3 | RNVC: 2

22 Jan 1983

3040-01-135-9208
Remote Control Lever

011359208
65-66072-2: RNCC: 3 | RNVC: 2

30 Jul 1982

3040-01-163-1830
Push-Pull Control Assembly

011631830
C81320-1: RNCC: 3 | RNVC: 2

28 Sep 1983

3040-01-137-1884
Linear Actuating Cylinder Assembly

011371884
787AS285-1: RNCC: 3 | RNVC: 2
787AS285: RNCC: 5 | RNVC: 2
H-73271: RNCC: 5 | RNVC: 9

22 Aug 1982

3040-01-130-3183
Rigid Connecting Link

011303183
65415-11101-052: RNCC: 3 | RNVC: 2

19 Apr 1982

3040-01-163-3241
Straight Shaft

011633241
2D2-208 ITEM 34: RNCC: 3 | RNVC: 2
2B1-967: RNCC: 5 | RNVC: 2

30 Sep 1983

3040-01-164-3952
Rigid Connecting Link

011643952
7-211670106: RNCC: 3 | RNVC: 2
7-211670106: RNCC: 5 | RNVC: 9

16 Oct 1983

3040-01-129-3934
Rigid Connecting Link

011293934
65410-00014-062: RNCC: 3 | RNVC: 2

5 Apr 1982

3040-01-165-7185
Rigid Connecting Link

011657185
L6311162-001: RNCC: 3 | RNVC: 2

3 Nov 1983

3040-01-164-3411
Shouldered Shaft

011643411
7566565-001: RNCC: 3 | RNVC: 2

14 Oct 1983

3040-01-129-3923
Bell Crank

011293923
65410-03210-045: RNCC: 3 | RNVC: 2

5 Apr 1982

3040-01-158-9474
Shouldered Shaft

011589474
70361-05006-106: RNCC: 3 | RNVC: 2

31 Jul 1983

3040-01-166-3327
Rigid Connecting Link

011663327
123BM10213-614: RNCC: 3 | RNVC: 2
123BM10213-614: RNCC: 5 | RNVC: 2
123BM10213-614: RNCC: 5 | RNVC: 2
123BM10213-614: RNCC: 5 | RNVC: 9

9 Nov 1983

3040-01-164-3955
Rigid Connecting Link

011643955
406-001-020-107: RNCC: 3 | RNVC: 2
406-001-020-101: RNCC: 5 | RNVC: 9

16 Oct 1983

3040-01-153-7747
Rigid Connecting Link

011537747
65415-11101-054: RNCC: 3 | RNVC: 2

16 May 1983

3040-01-164-0018
Shaft Collar

011640018
R49538: RNCC: 3 | RNVC: 2
R49538: RNCC: 3 | RNVC: 9
R49538: RNCC: 5 | RNVC: 9
37368230: RNCC: C | RNVC: 1

11 Oct 1983

3040-01-171-8510
Shaft Collar

011718510
M-71312: RNCC: 3 | RNVC: 2

15 Feb 1984

3040-01-100-0144
Piston Rod Ring

011000144
16104204: RNCC: 3 | RNVC: 2
16104204: RNCC: 3 | RNVC: 9
16300983 ITEM 009: RNCC: D | RNVC: 9

27 Aug 1980

3040-01-114-2176
Mechanical Drive Housing

011142176
145HS750-1: RNCC: 3 | RNVC: 2
HP1313101-1: RNCC: 5 | RNVC: 9
HP1313101-1: RNCC: 5 | RNVC: 9

15 Jun 1981

3040-01-117-5223
Shouldered Shaft

011175223
656C0297-J039A: RNCC: 3 | RNVC: 2
55-22389-15: RNCC: 5 | RNVC: 2
999R0320 PIECE 20: RNCC: 5 | RNVC: 9
656C0297: RNCC: C | RNVC: 1
999R0320: RNCC: D | RNVC: 9

15 Aug 1981

3040-01-079-3029
Reticle Control Shaft Assembly

010793029
12278916: RNCC: 3 | RNVC: 2

1 Jul 1979

3040-01-087-7879
Keyer Shaft Assembl

010877879
94086-1: RNCC: 3 | RNVC: 2
94086: RNCC: 3 | RNVC: 9

27 Dec 1979

3040-01-107-2360
Straight Shaft

011072360
12292455: RNCC: 3 | RNVC: 2

1 Feb 1981

3040-01-105-6599
Spur Gearshaft

011056599
12276638: RNCC: 3 | RNVC: 2

1 Jan 1981

3040-01-076-5350
Accumulator Cap

010765350
7-0295-2: RNCC: 3 | RNVC: 2

7 May 1979

3040-01-101-2560
Linear Actuating Cylinder Piston

011012560
G103475: RNCC: 3 | RNVC: 2

25 Sep 1980

3040-01-109-4187
Linear Actuating Cylinder Cap

011094187
27111: RNCC: 3 | RNVC: 2
70-28490 ITEM 17: RNCC: 5 | RNVC: 2
8156518-151: RNCC: C | RNVC: 1
SNJ55118J: RNCC: C | RNVC: 1
70-28490: RNCC: D | RNVC: 9

14 Mar 1981

3040-01-115-9601
Shouldered Shaft

011159601
723012: RNCC: 3 | RNVC: 2
723012: RNCC: 5 | RNVC: 9

17 Jul 1981

3040-01-117-7370
Rigid Connecting Link

011177370
145C1415-2: RNCC: 3 | RNVC: 2

21 Aug 1981

3040-01-121-2549
Gear And Shaft Asse

011212549
B1399: RNCC: 3 | RNVC: 9
1H-C18FS-19-13833-1-767-766: RNCC: 5 | RNVC: 9
200136T PIECE 327-13-14: RNCC: 5 | RNVC: 9
200136T PIECE 327-13-14: RNCC: C | RNVC: 1

4 Nov 1981

3040-01-107-0535
Manual Control Lever

011070535
X74222 PIECE 74: RNCC: 3 | RNVC: 9
19591: RNCC: 5 | RNVC: 9
X74222: RNCC: D | RNVC: 9

30 Jan 1981

3040-01-084-0542
Hydraulic Cylinder Adjusting Screw

010840542
4685201-0007: RNCC: 3 | RNVC: 2
704-4685201 ITEM 7: RNCC: 5 | RNVC: 2
4685201 ITEM 7: RNCC: 5 | RNVC: 2
87861-1514 ITEM 7: RNCC: 5 | RNVC: 9
704-4685201: RNCC: D | RNVC: 9

7 Oct 1979

3040-01-118-0509
Aft Station Engine Control Throttle Lever

011180509
16P1812-3: RNCC: 3 | RNVC: 2
16P1812-3: RNCC: 5 | RNVC: 2

26 Aug 1981

3040-01-117-4775
Actuato Piston Rack

011174775
28916: RNCC: 3 | RNVC: 2
895-28365 ITEM 3: RNCC: 5 | RNVC: 2

15 Aug 1981

3040-01-108-4981
Remote Control Lever

011084981
12292435: RNCC: 3 | RNVC: 2

28 Feb 1981

3040-01-114-9457
Spur Gearshaft

011149457
145D5313-2: RNCC: 3 | RNVC: 2
145D5313-2: RNCC: 5 | RNVC: 9
145D5313: RNCC: 7 | RNVC: 2

25 Jun 1981

3040-01-020-8371
Bell Crank Assembly

010208371
65-44072-2: RNCC: 3 | RNVC: 2

7 May 1976

3040-01-045-4717
Rigid Connecting Link

010454717
209-062-759-49: RNCC: 3 | RNVC: 2

1 Aug 1977

3040-01-038-2963
Mechanical Drive Housing

010382963
206-040-236-9: RNCC: 3 | RNVC: 2

3 Apr 1977

3040-01-045-7852
Shouldered Shaft

010457852
74898-1: RNCC: 3 | RNVC: 2
74186 ITEM NO.124: RNCC: 5 | RNVC: 2
74898: RNCC: 5 | RNVC: 9
74186PC124: RNCC: C | RNVC: 1
74186: RNCC: D | RNVC: 9

7 Aug 1977

3040-01-087-7131
Constant Speed Transmission Output Shaft

010877131
715798: RNCC: 3 | RNVC: 2

22 Dec 1979

3040-01-062-3705
Linear Actuating Cylinder Piston Rod

010623705
4685194-004: RNCC: 3 | RNVC: 2
704-4685194-0004: RNCC: 3 | RNVC: 9
87861-1506ITEM5: RNCC: D | RNVC: 9

15 Jul 1978

3040-01-093-8362
Shouldered Shaft

010938362
5073E115-11: RNCC: 3 | RNVC: 2

25 Apr 1980

3040-01-029-7336
Linear Actuating Cylinder Head

010297336
11578902: RNCC: 3 | RNVC: 2

21 Oct 1976

3040-01-033-0116
Input Shaft

010330116
717139: RNCC: 3 | RNVC: 2

27 Dec 1976

3040-01-024-1161
Bell Crank

010241161
123CM13014-502: RNCC: 3 | RNVC: 2
123CM13014-502: RNCC: 5 | RNVC: 9

5 Jul 1976

3040-01-050-1393
Spur Gearshaft

010501393
3024-506: RNCC: 3 | RNVC: 2

1 Nov 1977

3040-01-091-4057
Hub Clamp

010914057
626-111-001: RNCC: 3 | RNVC: 2

7 Mar 1980

3040-01-041-3485
Mechanical Drive Housing

010413485
12008247: RNCC: 3 | RNVC: 2

23 May 1977

3040-01-054-2796
Bevel Gearshaft

010542796
2045422-1: RNCC: 3 | RNVC: 2

17 Jan 1978

3040-01-047-4303
Rigid Connecting Link

010474303
69-51536-3: RNCC: 3 | RNVC: 2

7 Sep 1977

3040-01-083-3493
Outer Assembly Shaft

010833493
5073F151-1: RNCC: 3 | RNVC: 2

21 Sep 1979

3040-01-033-1319
Rigid Connecting Link

010331319
962937-101: RNCC: 3 | RNVC: 2
962937-101: RNCC: 5 | RNVC: 9

29 Dec 1976

3040-01-074-0607
Shouldered Shaft

010740607
167C2396: RNCC: 3 | RNVC: 2

24 Mar 1979

3040-01-025-0037
Control Cam

010250037
1568880: RNCC: 3 | RNVC: 2

24 Jul 1976

3040-01-060-9952
Valve Shaft

010609952
27016-420: RNCC: 3 | RNVC: 2
27016-001 FIND 3: RNCC: 5 | RNVC: 9
27016-001: RNCC: D | RNVC: 9

10 Jun 1978

3040-01-006-6195
Shouldered Shaft

010066195
737084: RNCC: 3 | RNVC: 2
737084: RNCC: 3 | RNVC: 9
H7832PC8: RNCC: 5 | RNVC: 2
H7832PC8: RNCC: 5 | RNVC: 9
737084: RNCC: 5 | RNVC: 9
H7832PC8: RNCC: 5 | RNVC: 9
737084: RNCC: 5 | RNVC: 9
H7832PC8: RNCC: 5 | RNVC: 9

19 Jul 1975

3040-01-063-3925
Rigid Connecting Link

010633925
123P11402-501: RNCC: 3 | RNVC: 2
123P11402-501: RNCC: 5 | RNVC: 2
123P11402-501: RNCC: 5 | RNVC: 2
123P11402-501: RNCC: 5 | RNVC: 9
123P11402: RNCC: D | RNVC: 9

4 Aug 1978

3040-01-083-0995
Spur Gearshaft

010830995
68680CX: RNCC: 3 | RNVC: 2
68680CX: RNCC: 5 | RNVC: 9
68680C: RNCC: 5 | RNVC: 9

16 Sep 1979

3040-01-091-2438
Bell Crank

010912438
1128CM42002-4: RNCC: 3 | RNVC: 2
1128CM42002-4: RNCC: 5 | RNVC: 9

4 Mar 1980

3040-01-055-0450
Shouldered Shaft

010550450
1647132-1: RNCC: 3 | RNVC: 2

30 Jan 1978

3040-01-083-2982
Remote Control Lever

010832982
12257282: RNCC: 3 | RNVC: 2

21 Sep 1979

3040-01-023-1791
Input Shaft

010231791
204-83053-3: RNCC: 3 | RNVC: 2

12 Jun 1976

3040-01-058-2835
Trip Lever Shaft

010582835
160D117256-1: RNCC: 3 | RNVC: 2
160D117256-1: RNCC: 5 | RNVC: 9

25 Mar 1978

3040-00-862-9272
Rigid Connecting Link

008629272
114C1014-2: RNCC: 3 | RNVC: 2
114C1014-2: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-01-007-0113
Rigid Connecting Link

010070113
160D123120-2: RNCC: 3 | RNVC: 9
160D123120-4: RNCC: 5 | RNVC: 9
160D123120-2: RNCC: 5 | RNVC: 9
160D123120-4: RNCC: 5 | RNVC: 9
160D123120-2: RNCC: C | RNVC: 1

26 Jul 1975

3040-00-968-8475
Rigid Connecting Link

009688475
127528: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-925-7537
Counterbalance Weight

009257537
528446CL3: RNCC: 3 | RNVC: 2

24 Jan 1966

3040-00-961-1330
Rigid Connecting Link

009611330
114C1015-4: RNCC: 3 | RNVC: 2
114C1015-4: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-889-7925
Straight Shaft

008897925
114S2613-23: RNCC: 3 | RNVC: 2
114S2613-23: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-939-8779
Coupling Thro Shaft

009398779
506565-1: RNCC: 3 | RNVC: 2

16 Nov 1965

3040-00-905-4654
Shaft Collar

009054654
140331-04: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-981-3141
Ball Joint

009813141
113-A-0019: RNCC: 3 | RNVC: 2
B8005-08-005FN10: RNCC: 5 | RNVC: 2
V18-005-10: RNCC: 5 | RNVC: 2
40138: RNCC: 5 | RNVC: 9
113-A-0019: RNCC: 5 | RNVC: 9
40138: RNCC: 5 | RNVC: 9
3800-800A: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-670-8934
Spur Gearshaft

006708934
6789695: RNCC: 3 | RNVC: 2
6789695: RNCC: 5 | RNVC: 2
6789695: RNCC: 5 | RNVC: 9
6789695: RNCC: 5 | RNVC: 9
6789695: RNCC: 5 | RNVC: 9
6789695: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-691-0219
Brake Disc

006910219
13G107: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-776-4763
Shouldered Shaft

007764763
457C19-0: RNCC: 3 | RNVC: 2
457C19-0: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-914-8923
Counterbalance Weight

009148923
137105-02: RNCC: 3 | RNVC: 2

1 Jul 1966

3040-00-864-4606
Flexible Shaft Assembly

008644606
S14319-501: RNCC: 3 | RNVC: 2
14319-501: RNCC: 5 | RNVC: 9

13 Oct 1967

3040-00-908-8613
Bell Crank

009088613
63J14362-1: RNCC: 3 | RNVC: 2
63J14362-1: RNCC: 5 | RNVC: 2
63J14362-1: RNCC: 5 | RNVC: 2
16-1512-1: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-971-3547
Rigid Connecting Link

009713547
128CM12268-1: RNCC: 3 | RNVC: 2
128CM12268-1: RNCC: 5 | RNVC: 9
128CM12268-1: RNCC: C | RNVC: 1

1 Jan 1962

3040-01-020-8372
Bell Crank

010208372
65-44072-1: RNCC: 3 | RNVC: 2

7 May 1976

3040-00-723-6592
Shouldered Shaft

007236592
7236592: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-858-0513
Input Shaft

008580513
31118: RNCC: 3 | RNVC: 2
31118: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-913-7021
Counterbalance Weight

009137021
137105-09: RNCC: 3 | RNVC: 2

29 Jun 1966

3040-00-808-0727
Spur Gearshaft

008080727
129657-01: RNCC: 3 | RNVC: 9

1 Jan 1962

3040-01-013-7957
Brake Shoe Plate

010137957
69-63632-1: RNCC: 3 | RNVC: 2
69-63632-1: RNCC: 5 | RNVC: 9

7 Dec 1975

3040-00-693-6530
Remote Control Lever

006936530
90-2339-2: RNCC: 3 | RNVC: 2
90-2339: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-871-7594
Bevel Gearshaft

008717594
589185: RNCC: 3 | RNVC: 9
589185: RNCC: 5 | RNVC: 2
589185: RNCC: 5 | RNVC: 2

1 Nov 1967

3040-00-985-3394
Multiple Gears Gearshaft

009853394
565652: RNCC: 3 | RNVC: 2
565652: RNCC: 5 | RNVC: 9
565652: RNCC: 5 | RNVC: 9

24 Oct 1966

3040-00-672-5130
Rigid Connecting Link

006725130
90-3221-3: RNCC: 3 | RNVC: 2
90-3221-3: RNCC: 5 | RNVC: 2
90-3221-3: RNCC: 5 | RNVC: 2
90-3221-3: RNCC: 5 | RNVC: 2
90-3221-3: RNCC: 5 | RNVC: 9
90-3221-3: RNCC: 5 | RNVC: 9
90-3221-3: RNCC: 5 | RNVC: 9
90-3221-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-943-7663
Spur Gearshaft

009437663
4550854-503: RNCC: 3 | RNVC: 2
4550854-503: RNCC: 5 | RNVC: 2
4550854-503: RNCC: 5 | RNVC: 9

2 Feb 1966

3040-01-022-5016
Shaft Assy

010225016
69-15846-1: RNCC: 3 | RNVC: 2

30 May 1976

3040-00-914-8684
Rigid Connecting Link

009148684
65404-03117-044: RNCC: 3 | RNVC: 2
65404-0117-044: RNCC: 5 | RNVC: 2
65404-03117-044: RNCC: 8 | RNVC: 2

8 Jul 1966

3040-00-918-5638
Control Cam

009185638
704656-1: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-942-3172
Multiple Gears Gearshaft

009423172
1835466-2: RNCC: 3 | RNVC: 2
1835466-2: RNCC: 5 | RNVC: 9

11 Dec 1965

3040-00-716-0117
Shaft

007160117
40912: RNCC: 3 | RNVC: 9
40912: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-941-9389
Control Cam

009419389
DS-933394: RNCC: 3 | RNVC: 2
DS-933394: RNCC: 5 | RNVC: 2
4153: RNCC: 5 | RNVC: 9
4153: RNCC: 5 | RNVC: 9

7 Dec 1965

3040-00-971-0374
Rigid Connecting Link

009710374
3-13403-7: RNCC: 3 | RNVC: 9
3-13403-7: RNCC: C | RNVC: 1

1 Jan 1962

3040-01-004-1280
Spur Gearshaft

010041280
367227-2: RNCC: 3 | RNVC: 2

22 May 1975

3040-00-955-6373
Rigid Connecting Link

009556373
32-61008-77: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-775-1152
Bevel Gearshaft

007751152
484C9: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-806-5436
Rigid Connecting Link

008065436
832032-1: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-821-4589
Output Shaft

008214589
105429A: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-907-1316
Multiple Gears Gearshaft

009071316
141042-02: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-822-3644
Spur Gearshaft

008223644
3123240: RNCC: 3 | RNVC: 2
3123240: RNCC: 5 | RNVC: 2
3123240: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-921-6115
Mechanical Drive Housing

009216115
8355724: RNCC: 3 | RNVC: 2
2520009216115: RNCC: 5 | RNVC: 9

27 Nov 1965

3040-00-939-1465
Brake Disc

009391465
36A221583G1: RNCC: 3 | RNVC: 2
36A221583G1: RNCC: 5 | RNVC: 2
36A221583G1: RNCC: 5 | RNVC: 9

3 Nov 1965

3040-00-887-2227
Straight Shaft

008872227
F71136-27: RNCC: 3 | RNVC: 2
F71136-27: RNCC: 5 | RNVC: 2
F71136-27: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-690-5158
Flexible Shaft Assembly Core

006905158
5011M52P2: RNCC: 1 | RNVC: 2
22171-2: RNCC: 3 | RNVC: 2
22171-2: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-885-0049
Rigid Connecting Link

008850049
114S1704-5: RNCC: 3 | RNVC: 2
114S1704-5: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-914-8924
Counterbalance Weight

009148924
137105-03: RNCC: 3 | RNVC: 2

1 Jul 1966

3040-00-806-5601
Rigid Connecting Link

008065601
908925-1: RNCC: 3 | RNVC: 2
908925-1: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-971-2990
Rigid Connecting Link

009712990
128CM12203-1: RNCC: 3 | RNVC: 2
128CM12203-1: RNCC: 5 | RNVC: 9
128CM12203-1: RNCC: C | RNVC: 1

1 Jan 1962

3040-00-920-8692
Rigid Connecting Link

009208692
3-41401-501: RNCC: 3 | RNVC: 2
3-41401-501: RNCC: 3 | RNVC: 9
3-41401-501: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-823-6371
Rigid Connecting Link

008236371
750645-3: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-870-0835
Turbine Engine Counter Balance Weight

008700835
398452CL4: RNCC: 3 | RNVC: 2
398452CLASS4: RNCC: 5 | RNVC: 9
398452CL4: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-793-2608
Bell Crank

007932608
556934: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-885-0062
Rigid Connecting Link

008850062
114S1704-1: RNCC: 3 | RNVC: 2
114S1704-1: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-802-4754
Rigid Connecting Link

008024754
750677-1: RNCC: 3 | RNVC: 2
LC-1188: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-912-0599
Shouldered Shaft

009120599
482675: RNCC: 3 | RNVC: 2
482675: RNCC: 5 | RNVC: 2

1 Jan 1960

3040-00-868-9201
Shouldered Shaft

008689201
GYLC1523: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-922-8040
Rigid Connecting Link

009228040
11701126: RNCC: 3 | RNVC: 9

25 Dec 1965

3040-00-887-3296
Shouldered Shaft

008873296
556546: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-556-6559
Control Cam

005566559
728095-2: RNCC: 3 | RNVC: 2
728095-2: RNCC: 5 | RNVC: 2

8 Nov 1974

3040-00-657-7571
Hydraulic Accumulator

006577571
5131274: RNCC: 3 | RNVC: 2
5131276: RNCC: 3 | RNVC: 9
6505042: RNCC: 5 | RNVC: 9
6505042: RNCC: 5 | RNVC: 9
6505042: RNCC: 5 | RNVC: 9
509962-1: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-529-6004
Worm Shaft

005296004
99138538: RNCC: 3 | RNVC: 2
38538: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-596-7058
Spur Gearshaft

005967058
5012T33P01: RNCC: 3 | RNVC: 2

11 Jan 1975

3040-00-450-5909
Flexible Shaft Assembly

004505909
209-062-924-1: RNCC: 1 | RNVC: 2
874632: RNCC: 3 | RNVC: 2
874632: RNCC: 5 | RNVC: 9

15 Dec 1969

3040-00-536-3575
Bell Crank Support

005363575
3314814-2: RNCC: 3 | RNVC: 2
354571-1R: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-596-7056
Spur Gearshaft

005967056
5012T34P01: RNCC: 3 | RNVC: 2

11 Jan 1975

3040-00-613-7625
Bell Crank

006137625
50-4677: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-591-3660
Bevel Gearshaft

005913660
5012T25P01: RNCC: 3 | RNVC: 2
5012T25P01: RNCC: 5 | RNVC: 2

28 Dec 1974

3040-00-723-0203
Spur Gearshaft

007230203
642007: RNCC: 3 | RNVC: 2
642007: RNCC: 5 | RNVC: 2
642007: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-483-2018
Rigid Connecting Link

004832018
1128L40600-1: RNCC: 3 | RNVC: 2
1128L40600-1: RNCC: 5 | RNVC: 9

1 Feb 1971

3040-00-470-6904
Straight Shaft

004706904
B102342: RNCC: 3 | RNVC: 2
B102342: RNCC: 5 | RNVC: 9
E102482 PART NO 19: RNCC: C | RNVC: 1
E102170 PC NO 19: RNCC: C | RNVC: 1
E101286 PC NO 19: RNCC: C | RNVC: 1

30 Jan 1970

3040-00-676-2865
Turbine Engine Counter Balance Weight

006762865
377096CLA: RNCC: 3 | RNVC: 2
377096CLA: RNCC: 5 | RNVC: 2
377096CLA: RNCC: 5 | RNVC: 9
377096CLASSA: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-677-8459
Spur Gearshaft

006778459
103102: RNCC: 3 | RNVC: 9
103102: RNCC: C | RNVC: 1

1 Jan 1961

3040-00-496-0200
Bell Crank

004960200
212-001-705-1: RNCC: 3 | RNVC: 2
212-001-705-001: RNCC: 5 | RNVC: 2

26 Sep 1969

3040-00-802-5363
Trim Tab Shaft

008025363
905518-1: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-565-4234
Shouldered Shaft

005654234
4034T15P02: RNCC: 3 | RNVC: 2
4034T15P02: RNCC: 5 | RNVC: 9
4034T15P01: RNCC: 5 | RNVC: 9

21 Nov 1974

3040-00-789-9339
Mechanical Drive Housing

007899339
95491-14: RNCC: 3 | RNVC: 2
95491-14: RNCC: 5 | RNVC: 9
95491-14: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-556-5143
Shouldered Shaft

005565143
5565143: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-557-2448
Shouldered Shaft

005572448
5572448: RNCC: 3 | RNVC: 2
1015005572448: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-536-2481
Shouldered Shaft

005362481
99191-1: RNCC: 3 | RNVC: 2
99191-1: RNCC: 5 | RNVC: 9
99191-1: RNCC: 5 | RNVC: 9
99191-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-570-0698
Oil Pump Gearshaft

005700698
6876478: RNCC: 3 | RNVC: 2
6876478: RNCC: 5 | RNVC: 2
6876478: RNCC: 5 | RNVC: 9
6876478: RNCC: 5 | RNVC: 9
6876478: RNCC: 5 | RNVC: 9
6876478: RNCC: 5 | RNVC: 9

1 Dec 1974

3040-00-654-3798
Control Cam

006543798
338386: RNCC: 3 | RNVC: 2
338386: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-775-4224
Shouldered Shaft

007754224
457C19-1: RNCC: 3 | RNVC: 2
457C19-1: RNCC: 5 | RNVC: 9
457C19-1: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-447-9706
Shouldered Shaft

004479706
8052246: RNCC: 3 | RNVC: 2
8052246: RNCC: 3 | RNVC: 9
8052246: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-511-9978
Spur Gearshaft

005119978
708075-1: RNCC: 3 | RNVC: 2
708075: RNCC: D | RNVC: 9

3 Aug 1974

3040-00-571-7739
Resolver Arm

005717739
209-074-012-1: RNCC: 3 | RNVC: 2
209-074-012-001: RNCC: 5 | RNVC: 2

4 Dec 1974

3040-00-679-0583
Shouldered Shaft

006790583
505832: RNCC: 3 | RNVC: 2
505832: RNCC: 5 | RNVC: 2
505832: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-00-777-6759
Straight Shaft

007776759
8351088: RNCC: 3 | RNVC: 2
62.51.019.A: RNCC: 5 | RNVC: 9
3040007776759: RNCC: 6 | RNVC: 9

1 Jan 1962

3040-00-419-9290
Linear Actuating Cylinder Assembly Parts Kit

004199290
RG2AHL0305: RNCC: 3 | RNVC: 2

7 Dec 1970

3040-00-607-8622
Rigid Connecting Link

006078622
589D00005: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-572-0767
Rigid Connecting Link

005720767
68A520704-1001: RNCC: 3 | RNVC: 2
68A520704-1001: RNCC: 5 | RNVC: 2
68A520704-1001: RNCC: 5 | RNVC: 2
68A520704-1001: RNCC: 5 | RNVC: 2
68A520704: RNCC: D | RNVC: 9

1 Dec 1974

3040-00-740-9945
Straight Shaft

007409945
M305824: RNCC: 3 | RNVC: 2
7409945: RNCC: 5 | RNVC: 2
M23018: RNCC: 5 | RNVC: 9
KC2740: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-737-9062
Spur Gearshaft

007379062
383268: RNCC: 3 | RNVC: 2
383268: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-414-7507
Shouldered Shaft

004147507
1128ES40005-7: RNCC: 3 | RNVC: 2
1128ES40005-7: RNCC: 5 | RNVC: 9

9 Nov 1970

3040-00-520-6500
Straight Shaft

005206500
94148-1: RNCC: 3 | RNVC: 2
94148-1: RNCC: 5 | RNVC: 2
94148-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-734-6741
Helical Gearshaft

007346741
62-8-38: RNCC: 3 | RNVC: 2
1001Z766: RNCC: 5 | RNVC: 2
100068R1: RNCC: 5 | RNVC: 2
7346741: RNCC: 5 | RNVC: 2
3020007346741: RNCC: 5 | RNVC: 9
62-8-38: RNCC: 5 | RNVC: 9
316678: RNCC: 5 | RNVC: 9
KC2506: RNCC: 5 | RNVC: 9
2352200: RNCC: 5 | RNVC: 9
100068R1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-678-4294
Shouldered Shaft

006784294
8765805: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-593-5021
Gear Sector Shaft

005935021
09-B-09: RNCC: 3 | RNVC: 2
09B09: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-482-6607
Shouldered Shaft

004826607
MBEU1976GRU5: RNCC: 3 | RNVC: 2
MBEU1976GRU5: RNCC: 5 | RNVC: 2
MBEU1976GRU5: RNCC: 5 | RNVC: 9

22 Jan 1971

3040-00-545-9456
Shouldered Shaft

005459456
4544539: RNCC: 3 | RNVC: 2
3885: RNCC: 3 | RNVC: 2
4544539: RNCC: 3 | RNVC: 2
4544539: RNCC: 5 | RNVC: 2
4544539: RNCC: 5 | RNVC: 9
3885: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-625-8577
Rigid Connecting Link

006258577
374529-2: RNCC: 3 | RNVC: 2
374529-2: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-678-7039
Bell Crank

006787039
8350960: RNCC: 3 | RNVC: 2
8350960: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-863-8623
Turbine Engine Counter Balance Weight

008638623
398452CL3: RNCC: 3 | RNVC: 2
398452CLASS3: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-449-6618
Shouldered Shaft

004496618
A01232001: RNCC: 3 | RNVC: 2
AA1232-1: RNCC: 3 | RNVC: 9
NN84PC631: RNCC: E | RNVC: 8
AA1232-1-1: RNCC: E | RNVC: 8

8 Dec 1969

3040-00-609-3312
Mechanical Drive Housing

006093312
5114200: RNCC: 3 | RNVC: 2
MILE11276: RNCC: 4 | RNVC: 1
QPL11276: RNCC: 5 | RNVC: 1
5114200: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-488-5528
Indicator Wheel Assembly

004885528
40778-501: RNCC: 3 | RNVC: 2

15 May 1970

3040-00-590-2590
Multiple Gears Gearshaft

005902590
105567: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-824-1465
Spur Gearshaft

008241465
1091309: RNCC: 3 | RNVC: 2

11 Aug 1967

3040-00-025-9452
Bell Crank

000259452
107C2520-9: RNCC: 3 | RNVC: 2

26 Oct 1972

3040-00-160-4539
Straight Shaft

001604539
A15511: RNCC: 3 | RNVC: 9

28 Jan 1973

3040-00-164-4245
Bell Crank

001644245
128LM10306-11: RNCC: 3 | RNVC: 2
128LM10306-11: RNCC: 5 | RNVC: 9

2 Feb 1973

3040-00-167-4100
Rigid Connecting Link

001674100
1128L40400-3: RNCC: 3 | RNVC: 9
1128L40400-3: RNCC: 5 | RNVC: 9
1128L40400-3: RNCC: C | RNVC: 1

7 Feb 1973

3040-00-306-3636
Rigid Connecting Link

003063636
342456-4: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-480-6737
Flexible Shaft Assembly

004806737
212-001-732-1: RNCC: 1 | RNVC: 2
FASSW15MZX: RNCC: 3 | RNVC: 2
12354Y58-56: RNCC: 5 | RNVC: 9
12354Y58-56: RNCC: 5 | RNVC: 9

2 Sep 1970

3040-00-481-6197
Shouldered Shaft

004816197
700896: RNCC: 3 | RNVC: 2

11 Sep 1970

3040-00-468-0789
Manual Control Lever

004680789
128AB10157-7: RNCC: 3 | RNVC: 2
128AB10157-7: RNCC: 5 | RNVC: 9
128AB10157-7: RNCC: 5 | RNVC: 9
128AB10157-3: RNCC: 5 | RNVC: 9
128AB10157-7: RNCC: 5 | RNVC: 9

17 Aug 1970

3040-00-184-0306
Shouldered Shaft

001840306
MBEU1957GRU5: RNCC: 3 | RNVC: 2
MBEU1957GRU5: RNCC: 5 | RNVC: 2

10 Feb 1971

3040-00-252-7408
Linear Actuating Cylinder Piston

002527408
613252: RNCC: 3 | RNVC: 2
613252: RNCC: 5 | RNVC: 2
613252: RNCC: 5 | RNVC: 2

19 Jun 1970

3040-00-229-1533
Bell Crank

002291533
107C2521-6: RNCC: 3 | RNVC: 2

10 Sep 1972

3040-00-293-4953
Sector Gearshaft

002934953
6875123: RNCC: 3 | RNVC: 2
6875123: RNCC: 5 | RNVC: 9

22 Sep 1973

3040-00-073-2526
Rigid Connecting Link

000732526
107S2323-17: RNCC: 3 | RNVC: 2
107S2323-17: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-483-2017
Rigid Connecting Link

004832017
1128LM40510-1: RNCC: 3 | RNVC: 2
1128LM40510-1: RNCC: 5 | RNVC: 9
1128LM405010-1: RNCC: 5 | RNVC: 9
1128LM40510-1: RNCC: C | RNVC: 1

1 Feb 1971

3040-00-146-4270
Thrust Bearing Shoe

001464270
462593PC640T0642: RNCC: 3 | RNVC: 2
7-2593-640: RNCC: 5 | RNVC: 2
18J707PC640T0642: RNCC: 5 | RNVC: 2
462593PC640T0642: RNCC: 5 | RNVC: 2
7-2593-640: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-252-8435
Spur Gearshaft

002528435
106953: RNCC: 3 | RNVC: 2

14 Jul 1969

3040-00-172-5970
Bell Crank

001725970
A02C4101-4: RNCC: 3 | RNVC: 2

1 Sep 1972

3040-00-272-4718
Rigid Connecting Link

002724718
4500-207: RNCC: 3 | RNVC: 2
4028-3: RNCC: 5 | RNVC: 9
68B618000-207: RNCC: 7 | RNVC: 2

30 Jul 1973

3040-00-465-6306
Kicker Shoe

004656306
1707-356: RNCC: 3 | RNVC: 2
1707-356: RNCC: 5 | RNVC: 9
1707-356: RNCC: C | RNVC: 1

16 Jan 1970

3040-00-128-7582
Rigid Connecting Link

001287582
206-061-714-5: RNCC: 3 | RNVC: 2
206-061-714-5: RNCC: 3 | RNVC: 2
206-061-714: RNCC: D | RNVC: 9

2 Dec 1968

3040-00-449-9041
Engine Mount Shaft

004499041
14-50212-3: RNCC: 3 | RNVC: 2
14-50212-3: RNCC: 3 | RNVC: 9
14-50212: RNCC: 5 | RNVC: 2
14-50212-3: RNCC: 5 | RNVC: 9
14-50212-1: RNCC: 5 | RNVC: 9

30 May 1974

3040-00-476-9668
Spur Gearshaft

004769668
66319-301: RNCC: 3 | RNVC: 2
66319-301: RNCC: 5 | RNVC: 9

11 Jun 1971

3040-00-216-2214
Bell Crank

002162214
55A40D12-1: RNCC: 3 | RNVC: 2
48A9H5-4: RNCC: 5 | RNVC: 9
55A40D12-1: RNCC: 5 | RNVC: 9
48A9H5-4: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-347-3087
Bell Crank

003473087
5-97699: RNCC: 3 | RNVC: 2
5-97699: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-407-6749
Manual Control Lever

004076749
10871487: RNCC: 3 | RNVC: 2
2520004076749: RNCC: 5 | RNVC: 9
2520004076749: RNCC: 6 | RNVC: 9

2 Jul 1970

3040-00-421-9835
Rigid Connecting Link

004219835
1128CV40530-9: RNCC: 3 | RNVC: 2
1128CV40530: RNCC: 5 | RNVC: 2
1128CV40530-9: RNCC: 5 | RNVC: 9

14 Dec 1970

3040-00-073-2467
Rigid Connecting Link

000732467
107S2323-7: RNCC: 3 | RNVC: 2
107S2323-7: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-332-1369
Rigid Connecting Link

003321369
4500-255: RNCC: 3 | RNVC: 2
68B618000-255: RNCC: 5 | RNVC: 2
68J618000-255: RNCC: 5 | RNVC: 9
4028-15: RNCC: 5 | RNVC: 9

16 Dec 1973

3040-00-229-0855
Bell Crank

002290855
A02C3103-4: RNCC: 3 | RNVC: 2

10 Sep 1972

3040-00-294-1180
Shouldered Shaft

002941180
327112: RNCC: 3 | RNVC: 2

5 Oct 1991

3040-00-131-6213
Control Cam

001316213
750618-4: RNCC: 3 | RNVC: 2
750618-1: RNCC: E | RNVC: 8

21 Mar 1975

3040-00-169-0308
Shouldered Shaft

001690308
1128NM40019-11: RNCC: 3 | RNVC: 2
1128NM40019-11: RNCC: 5 | RNVC: 2
1128NM40019-11: RNCC: 5 | RNVC: 9
1128NM40019: RNCC: D | RNVC: 9

24 Oct 1970

3040-00-127-2459
Mechanical Drive Housing

001272459
204-072-917-1: RNCC: 3 | RNVC: 2
204-072-917-001: RNCC: 5 | RNVC: 2

22 Nov 1968

3040-00-074-2205
Rigid Connecting Link

000742205
107C1553-13: RNCC: 3 | RNVC: 2
107C1553-13: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-122-6478
Spur Gearshaft

001226478
94132: RNCC: 3 | RNVC: 2

30 Oct 1968

3040-00-169-7696
Nose Gear Box Tachometer Gear

001697696
65355-12073-102: RNCC: 3 | RNVC: 2
65355-12073-102: RNCC: 5 | RNVC: 2
65355-12073-102: RNCC: 5 | RNVC: 2

25 Aug 1972

3040-00-332-6051
Flexible Control Casing

003326051
4F55437-103C: RNCC: 3 | RNVC: 2
55555-8146: RNCC: 5 | RNVC: 2
55555-8146 4F55437-103C: RNCC: 5 | RNVC: 9

16 Dec 1973

3040-00-400-3757
Spur Gearshaft

004003757
C5B27983: RNCC: 3 | RNVC: 2
C5B27983: RNCC: 3 | RNVC: 9

28 Feb 1969

3040-00-450-7866
Rigid Connecting Link

004507866
212-060-724-13: RNCC: 3 | RNVC: 2
212-060-724-13: RNCC: 5 | RNVC: 2

17 Dec 1969

3040-00-403-3106
Control Cam

004033106
704657-4: RNCC: 3 | RNVC: 2

19 Jun 1970

3040-00-217-7020
Shouldered Shaft

002177020
40637: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-307-4733
Spur-Worm Gearshaft

003074733
GYLC-191: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-409-7974
Manual Control Lever

004097974
8758598: RNCC: 3 | RNVC: 2

22 Jul 1970

3040-00-335-6823
Rigid Connecting Link

003356823
9-66013-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-421-9836
Rigid Connecting Link

004219836
1128C40209-1: RNCC: 3 | RNVC: 2
1128C40209-1: RNCC: 5 | RNVC: 9

14 Dec 1970

3040-00-229-1907
Bell Crank

002291907
107C2513-7: RNCC: 3 | RNVC: 2

10 Sep 1972

3040-00-366-3482
Pawl

003663482
8028498: RNCC: 3 | RNVC: 2
8028498: RNCC: 3 | RNVC: 9
8075236PC8028498: RNCC: 5 | RNVC: 9
8028498: RNCC: 5 | RNVC: 9
8075239PC8028498: RNCC: 5 | RNVC: 9
9326198: RNCC: C | RNVC: 1

1 Jan 1961

3040-00-162-0976
Bell Crank

001620976
14-40482-2: RNCC: 3 | RNVC: 2
14-40482-2: RNCC: 5 | RNVC: 2
14-40482-2: RNCC: 5 | RNVC: 9

5 Nov 1971

3040-00-228-8904
Manual Control Lever

002288904
206-031-574-43: RNCC: 3 | RNVC: 2
206-031-574-43: RNCC: 5 | RNVC: 2

7 Feb 1969

3040-00-163-4458
Control Cam

001634458
123CVM10200-501: RNCC: 3 | RNVC: 2
123CVM10200-501: RNCC: 5 | RNVC: 9

21 Aug 1972

3040-00-192-0323
Pawl Shaft Assy

001920323
MBEU36136: RNCC: 3 | RNVC: 2
MBEU36136: RNCC: 5 | RNVC: 2

22 Jan 1969

3040-00-234-0129
Rigid Connecting Link

002340129
1128AMM40460-1: RNCC: 3 | RNVC: 2
1128AMM40460-1: RNCC: 5 | RNVC: 2
1128AMM40460-1: RNCC: 5 | RNVC: 9

5 Mar 1971

3040-00-291-2651
Bell Crank

002912651
1292842-101: RNCC: 3 | RNVC: 2
1292842-101: RNCC: 5 | RNVC: 9

14 Sep 1973

3040-00-422-4448
Bevel Gearshaft

004224448
69-30093: RNCC: 3 | RNVC: 2
69-30093: RNCC: 5 | RNVC: 9

7 Apr 1971

3040-00-159-7649
Bell Crank

001597649
107C2615-11: RNCC: 3 | RNVC: 2

21 Aug 1972

3040-00-129-8609
Spur Gearshaft

001298609
595896-1: RNCC: 3 | RNVC: 2
595896-1: RNCC: 5 | RNVC: 2

4 Dec 1968

3040-00-174-3724
Rigid Connecting Link

001743724
128L10092-1: RNCC: 3 | RNVC: 2
128L10092-1: RNCC: 5 | RNVC: 9

22 Feb 1973

3040-00-347-6574
Control Cam

003476574
50-3751-2: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-370-0662
Nonrotating Shaft Eye Bracket

003700662
521509042: RNCC: 3 | RNVC: 2
150904: RNCC: 5 | RNVC: 2
150904: RNCC: 5 | RNVC: 9
521509042: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-453-2946
Shaft Collar

004532946
SP931G: RNCC: 3 | RNVC: 2
SP931G: RNCC: 3 | RNVC: 9
SP931G: RNCC: 5 | RNVC: 2
SP931G: RNCC: 5 | RNVC: 9

8 May 1970

3040-00-127-2458
Mechanical Drive Housing

001272458
204-072-916-1: RNCC: 3 | RNVC: 2
204-072-916-001: RNCC: 5 | RNVC: 2

22 Nov 1968

3040-00-008-8008
Shouldered Shaft

000088008
502305: RNCC: 3 | RNVC: 2

23 Jul 1972

3040-00-009-9063
Bell Crank

000099063
107C2604-8: RNCC: 3 | RNVC: 2

11 Aug 1972

3040-00-083-3485
Straight Shaft

000833485
HP761110: RNCC: 3 | RNVC: 2
HP761110: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-008-5113
Linear Actuating Cylinder Assembly

000085113
2815846: RNCC: 3 | RNVC: 2

21 Jul 1972

3040-00-066-5751
Shouldered Shaft

000665751
064-11655-000: RNCC: 3 | RNVC: 2
364-31748EPC70: RNCC: 5 | RNVC: 9
064-26946EPC70: RNCC: 5 | RNVC: 9
064-11655D: RNCC: 5 | RNVC: 9

29 Jun 1967

3040-00-034-2430
Manual Control Lever

000342430
3-50851-501: RNCC: 3 | RNVC: 2
3-50851-501: RNCC: 3 | RNVC: 9
3-50851-501: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-078-3338
Fwd Connecting Link

000783338
A02R2551-7: RNCC: 3 | RNVC: 2
Z01R2551-13: RNCC: C | RNVC: 1
A02R2551-13: RNCC: C | RNVC: 1
A02R2551: RNCC: D | RNVC: 9

5 Aug 1967

3040-00-113-4048
Bell Crank

001134048
9643M92G02: RNCC: 3 | RNVC: 2

30 Aug 1968

3040-00-072-8954
Rigid Connecting Link

000728954
69-2944-5: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-073-4256
Rigid Connecting Link

000734256
107C1553-1: RNCC: 3 | RNVC: 2
107C1553-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-014-4686
Rigid Connecting Link

000144686
114P2049-2: RNCC: 3 | RNVC: 2

6 May 1968

3040-00-073-4215
Rigid Connecting Link

000734215
107C2551-2: RNCC: 3 | RNVC: 2
107C2551-2: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-073-4223
Rigid Connecting Link

000734223
107C2551-12: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-083-4466
Shouldered Shaft

000834466
584188: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-073-4188
Rigid Connecting Link

000734188
107C2561-3: RNCC: 3 | RNVC: 2
107C2561-3: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-013-3166
Spur Gearshaft

000133166
693509: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-082-7628
Shouldered Shaft

000827628
584303-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-050-7630
Turbine Engine Counter Balance Weight

000507630
557339CL2: RNCC: 3 | RNVC: 2
557339CL2: RNCC: 5 | RNVC: 2
557339CL2: RNCC: 5 | RNVC: 9

11 May 1967

3040-00-073-4222
Rigid Connecting Link

000734222
107C2551-11: RNCC: 3 | RNVC: 2
107C2551-5: RNCC: 5 | RNVC: 9
107C2551-5: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-010-8293
Rigid Connecting Link

000108293
128L10027-1: RNCC: 3 | RNVC: 9
128L10027-1: RNCC: 5 | RNVC: 2
128L10027-1: RNCC: 5 | RNVC: 2
128L10027: RNCC: 5 | RNVC: 9
128L10027-1: RNCC: 5 | RNVC: 9
128L10027-1: RNCC: C | RNVC: 1

1 May 1968

3040-00-083-4422
Shouldered Shaft

000834422
584050: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-009-5602
Bell Crank

000095602
A02C3101-4: RNCC: 3 | RNVC: 2
A02C3101-7: RNCC: 5 | RNVC: 2

4 Aug 1972

3040-00-050-7641
Turbine Engine Counter Balance Weight

000507641
557339CL3: RNCC: 3 | RNVC: 2
557339CL3: RNCC: 5 | RNVC: 2
557339CL3: RNCC: 5 | RNVC: 9

11 May 1967

3040-00-019-7238
Spur Gearshaft

000197238
701310: RNCC: 3 | RNVC: 2
701310: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-012-4020
Bell Crank Door Latch Shaft

000124020
107S4292-1: RNCC: 3 | RNVC: 2
107S4292-1: RNCC: 5 | RNVC: 2
107S4292-1: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-009-9146
Control Cam

000099146
123CM12209-511: RNCC: 3 | RNVC: 2
123CM12209-511: RNCC: 5 | RNVC: 9

11 Aug 1972

3040-00-050-7642
Turbine Engine Counter Balance Weight

000507642
557339CL5: RNCC: 3 | RNVC: 2
557339CL5: RNCC: 5 | RNVC: 2
557339CL5: RNCC: 5 | RNVC: 9

11 May 1967

3040-00-074-2181
Rigid Connecting Link

000742181
107C1553-6: RNCC: 3 | RNVC: 2
107C1553-6: RNCC: 5 | RNVC: 2
107C1553-6: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-324-9147
Push-Pull Control Assembly

013249147
LE161-0022-0040: RNCC: 3 | RNVC: 2
1601010-002: RNCC: 5 | RNVC: 2

24 Aug 1990

3040-01-178-9453
Remote Control Lever

011789453
P12605280N: RNCC: 3 | RNVC: 2
P12605280N: RNCC: 3 | RNVC: 9

12 May 1984

3040-01-593-4023
Shouldered Shaft

015934023
7548105-30: RNCC: 3 | RNVC: 2

7 Apr 2011

3040-01-548-5562
Linear Actuating Cylinder Assembly

015485562
235916A1: RNCC: 3 | RNVC: 2

27 Feb 2007

3040-01-396-7881
Spur Gearshaft

013967881
387-3786-3: RNCC: 3 | RNVC: 2
387-3786-3: RNCC: 3 | RNVC: 9
387-3786-3: RNCC: 5 | RNVC: 9

24 Sep 1994

3040-01-310-4977
Shouldered Shaft

013104977
145D5319-5: RNCC: 3 | RNVC: 2
145D5319-3: RNCC: E | RNVC: 8

4 Nov 1989

3040-01-177-4561
Straight Shaft

011774561
843535: RNCC: 3 | RNVC: 2

25 Apr 1984

3040-00-701-2945
Shouldered Shaft

007012945
204-001-190-1: RNCC: 3 | RNVC: 2
204-001-190-001: RNCC: 5 | RNVC: 2
204-001-190-1: RNCC: 5 | RNVC: 2
SA10041: RNCC: 5 | RNVC: 2
204-001-190-1: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-521-7905
Ball Joint

015217905
AHMT-8: RNCC: 3 | RNVC: 2
AHMT8: RNCC: 3 | RNVC: 9

3 Jul 2004

3040-01-475-2278
Linear Actuating Cylinder Piston

014752278
3049760: RNCC: 3 | RNVC: 2
3049760: RNCC: 5 | RNVC: 9
AT154666: RNCC: 5 | RNVC: 9

25 May 2000

3040-01-422-5931
Shouldered Shaft

014225931
408Z0019J026Z: RNCC: 3 | RNVC: 2
PL-D4680 PIECE 88: RNCC: 5 | RNVC: 9

5 Dec 1995

3040-00-915-6950
Rigid Connecting Link

009156950
65400-00111-065: RNCC: 3 | RNVC: 2
65400-00111-065: RNCC: 8 | RNVC: 2

31 Oct 1965

3040-01-461-8737
Linear Actuating Cylinder Assembly

014618737
AG189986D0: RNCC: 3 | RNVC: 2
5038022: RNCC: 5 | RNVC: 9
2.50CF/H-2HLTVS13C X 82.000: RNCC: 5 | RNVC: 9

8 Jan 1999

3040-01-333-1523
Linear Actuating Cylinder Assembly Parts Kit

013331523
59-46124: RNCC: 3 | RNVC: 9
59-46124: RNCC: 5 | RNVC: 9

25 Jan 1991

3040-00-888-8408
Rigid Connecting Link

008888408
528255: RNCC: 3 | RNVC: 2
528255: RNCC: 5 | RNVC: 9

20 Dec 2011

3040-01-353-7644
Rigid Connecting Link

013537644
8100-1251-0192 PC143: RNCC: 3 | RNVC: 2
8100-1251-0192: RNCC: D | RNVC: 9

15 Feb 1992

3040-00-908-1787
Rigid Connecting Link

009081787
3-73846-1: RNCC: 3 | RNVC: 2
3-73846-1: RNCC: 5 | RNVC: 2
3-73846-1: RNCC: 5 | RNVC: 2
3-73846-1: RNCC: 5 | RNVC: 2
3-73846-1: RNCC: 5 | RNVC: 9
3-73846-1: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-01-466-1861
Front Yoke Assy

014661861
HM-12: RNCC: 3 | RNVC: 2

9 Jul 1999

3040-01-514-0425
Spur Gearshaft

015140425
1962M38P04: RNCC: 3 | RNVC: 2
1962M38: RNCC: D | RNVC: 9

15 Oct 2003

3040-01-582-2448
Linear Actuating Cylinder

015822448
801-1755: RNCC: 3 | RNVC: 2
12350420-1: RNCC: 7 | RNVC: 2
12350420: RNCC: D | RNVC: 9

12 Feb 2010

3040-01-480-5113
Airc Inertia Damper

014805113
CZ09609022: RNCC: 3 | RNVC: 2
74J658015-103: RNCC: 5 | RNVC: 2

23 Nov 2000

3040-01-482-7942
Brake Shoe Set

014827942
12-3752-1X2: RNCC: 3 | RNVC: 2
473752PN1,2: RNCC: 5 | RNVC: 2
473752: RNCC: D | RNVC: 9

5 Mar 2001

3040-01-320-9504
Rigid Connecting Link

013209504
4069877: RNCC: 3 | RNVC: 2
3040PL0668846: RNCC: 6 | RNVC: 9

6 Jun 1990

3040-01-170-2483
Rigid Connecting Link

011702483
70250-34042-102: RNCC: 3 | RNVC: 2

22 Jan 1984

3040-00-788-0240
Bevel Gearshaft

007880240
410906: RNCC: 3 | RNVC: 2
410906: RNCC: 5 | RNVC: 2
410906: RNCC: 5 | RNVC: 2
410906: RNCC: 5 | RNVC: 2
410906: RNCC: 5 | RNVC: 2
410906: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-807-9355
Rigid Connecting Link

008079355
808494-1: RNCC: 3 | RNVC: 2
808494-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-348-9028
Quadrant Gear Shaft

003489028
A2460: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-01-115-3622
Rigid Connecting Link

011153622
114R3611-2: RNCC: 3 | RNVC: 2
114R3611-2: RNCC: 5 | RNVC: 2

4 Jul 1981

3040-01-629-1570
Torque Latcho Assy

016291570
8051377: RNCC: 3 | RNVC: 9
E0500 ITEM NO. 93: RNCC: 5 | RNVC: 9

19 Jun 2014

3040-01-631-8937
Linear Actuating Cylinder Assembly

016318937
HMW3024: RNCC: 3 | RNVC: 9

30 Sep 2014

3040-01-661-0544
Nonrotating Shaft Eye Bracket

016610544
J54001-28: RNCC: 3 | RNVC: 2

14 Feb 2017

3040-01-687-1123
Rigid Connecting Link

016871123
258T5215-2: RNCC: 3 | RNVC: 2

18 Mar 2020

3040-01-633-9205
Rigid Connecting Link

016339205
167-8278269 PC 22: RNCC: 3 | RNVC: 1
8278269: RNCC: D | RNVC: 9

9 Dec 2014

3040-01-640-8345
Mechanically Actuated Spindle

016408345
167-8396979 ITEM 15: RNCC: 3 | RNVC: 2

24 Dec 2014

3040-01-641-0909
Rigid Connecting Link

016410909
167-8278271 ITEM 17: RNCC: 3 | RNVC: 2

8 Jan 2015

3040-01-648-3378
Shouldered Shaft

016483378
10477-100-2: RNCC: 3 | RNVC: 2
10477-100 REV B PC# 2: RNCC: C | RNVC: 1

21 Sep 2015

3040-01-653-0160
Rigid Connecting Link

016530160
273A2105-1: RNCC: 3 | RNVC: 2

10 Mar 2016

3040-01-658-3128
Rigid Connecting Link

016583128
A32031-14: RNCC: 3 | RNVC: 2

21 Sep 2016

3040-01-660-3235
Shouldered Shaft

016603235
MA280037-21: RNCC: 3 | RNVC: 2

17 Jan 2017

3040-01-660-7744
Rigid Connecting Link

016607744
12621122: RNCC: 3 | RNVC: 2

2 Feb 2017

3040-01-662-7533
Mechanical Drive Housing Part

016627533
4803-105: RNCC: 3 | RNVC: 2

18 Apr 2017

3040-01-662-7871
Bell Crank

016627871
4803-3060: RNCC: 3 | RNVC: 2

19 Apr 2017

3040-01-672-4583
Linear Actuating Cylinder Assembly

016724583
BB-2HLTPS14A10: RNCC: 3 | RNVC: 2

2 May 2018

3040-01-692-8368
Breather

016928368
130300073: RNCC: 3 | RNVC: 2
130300073: RNCC: 5 | RNVC: 2
311-8592290: RNCC: D | RNVC: 9

14 Jan 2021

3040-01-696-0060
Rigid Connecting Link

016960060
113T1957-1: RNCC: 3 | RNVC: 1

2 Jul 2021

3040-01-643-4977
Straight Shaft

016434977
63312M1313-101: RNCC: 3 | RNVC: 2
63312M1313-101: RNCC: 5 | RNVC: 2

3 Apr 2015

3040-01-632-5646
Rigid Connecting Link

016325646
69-39176-2: RNCC: 3 | RNVC: 2

23 Oct 2014

3040-01-643-4463
Shouldered Shaft

016434463
B3-097-0013: RNCC: 3 | RNVC: 2
D3-433-0010 REV D ITEM 1: RNCC: 5 | RNVC: 2

1 Apr 2015

3040-01-656-9825
Rigid Connecting Link

016569825
12580515: RNCC: 3 | RNVC: 2

26 Jul 2016

3040-01-661-4060
Rigid Connecting Link

016614060
842-349253-16: RNCC: 3 | RNVC: 1

1 Mar 2017

3040-01-662-7535
Control Cam

016627535
4803-3080: RNCC: 3 | RNVC: 2

18 Apr 2017

3040-01-663-0557
Rigid Connecting Link

016630557
4F73182-106A: RNCC: 3 | RNVC: 2

25 Apr 2017

3040-01-694-5593
Rigid Connecting Link

016945593
113T1957-6: RNCC: 3 | RNVC: 1

8 Apr 2021

3040-01-694-5580
Rigid Connecting Link

016945580
113T1931-1: RNCC: 3 | RNVC: 1

8 Apr 2021

3040-01-694-7945
Shaft Collar

016947945
140T2916-3: RNCC: 3 | RNVC: 1

24 Apr 2021

3040-01-695-0734
Rigid Connecting Link

016950734
271T0154-2: RNCC: 3 | RNVC: 1

12 May 2021

3040-01-632-5172
Rigid Connecting Link

016325172
6P2-11650-00-00: RNCC: 3 | RNVC: 2

22 Oct 2014

3040-01-641-7237
Bell Crank

016417237
167-8278268 ITEM 13: RNCC: 3 | RNVC: 2
8278268: RNCC: D | RNVC: 9

30 Jan 2015

3040-01-649-4503
Nonaircraft Mechanical Actuator

016494503
7A70048: RNCC: 3 | RNVC: 2
7A10007 REV B NO 5: RNCC: 5 | RNVC: 2

29 Oct 2015

3040-01-657-8957
Linear Actuating Cylinder Assembly Parts Kit

016578957
456-4488: RNCC: 3 | RNVC: 2

2 Sep 2016

3040-01-658-0638
Shaft Collar

016580638
A27006-22: RNCC: 3 | RNVC: 2

12 Sep 2016

3040-01-658-9332
Linear Actuating Cylinder Assembly

016589332
2.00BB-2HLU14A9.688: RNCC: 3 | RNVC: 2
A71015-125: RNCC: 5 | RNVC: 2

25 Oct 2016

3040-01-660-9048
Rigid Connecting Link

016609048
A55004-17: RNCC: 3 | RNVC: 2

8 Feb 2017

3040-01-666-0558
Remote Control Lever

016660558
8M0079286: RNCC: 3 | RNVC: 2

22 Aug 2017

3040-01-682-7778
Nonaircraft Mechanical Actuator

016827778
445800: RNCC: 3 | RNVC: 2

23 Aug 2019

3040-01-694-5588
Rigid Connecting Link

016945588
113T1957-4: RNCC: 3 | RNVC: 1

8 Apr 2021

3040-01-660-9505
Rigid Connecting Link

016609505
A27118-121: RNCC: 3 | RNVC: 2

9 Feb 2017

3040-01-633-4973
Straight Shaft

016334973
167-8200543 ITEM 83: RNCC: 3 | RNVC: 2
167-8278261 ITEM NO 24: RNCC: 5 | RNVC: 2
167-8278265 ITEM 59: RNCC: 5 | RNVC: 2
167-8200543: RNCC: D | RNVC: 9
167-8278265: RNCC: D | RNVC: 9

24 Nov 2014

3040-01-646-9143
Manual Control Lever

016469143
P12619132: RNCC: 3 | RNVC: 2
P12619132: RNCC: 3 | RNVC: 9

4 Aug 2015

3040-01-660-7836
Rigid Connecting Link

016607836
A27118-39: RNCC: 3 | RNVC: 2

3 Feb 2017

3040-01-687-0609
Mechanical Drive Housing

016870609
427 210 125: RNCC: 3 | RNVC: 2

17 Mar 2020

3040-01-633-9196
Rigid Connecting Link

016339196
167-8278269 PC 24: RNCC: 3 | RNVC: 1
8278269: RNCC: D | RNVC: 9

9 Dec 2014

3040-01-653-4498
Rigid Connecting Link

016534498
141T6167-3: RNCC: 3 | RNVC: 1

23 Mar 2016

3040-01-655-6220
Mechanical Drive Housing

016556220
842-349256-2: RNCC: 3 | RNVC: 1

2 Jun 2016

3040-01-661-3667
Shaft Retaining Plate

016613667
J54001-24: RNCC: 3 | RNVC: 2

28 Feb 2017

3040-01-662-4450
Pawl

016624450
392-14: RNCC: 3 | RNVC: 2

6 Apr 2017

3040-01-687-0136
Shouldered Shaft

016870136
57710P112105: RNCC: 3 | RNVC: 2
57710P112105: RNCC: 5 | RNVC: 9

13 Mar 2020

3040-01-693-9410
Rigid Connecting Link

016939410
69B15978-6: RNCC: 3 | RNVC: 1

11 Mar 2021

3040-01-633-9192
Rigid Connecting Link

016339192
167-8278269 PC 23: RNCC: 3 | RNVC: 1
8278269: RNCC: D | RNVC: 9

9 Dec 2014

3040-01-643-8952
Rotating Shaft Eye Bracket

016438952
5100010162: RNCC: 3 | RNVC: 2

15 Apr 2015

3040-01-651-2833
Push-Pull Control Assembly

016512833
KRF3000-TT-15.5: RNCC: 3 | RNVC: 2

12 Jan 2016

3040-01-660-9748
Rigid Connecting Link

016609748
A55004-91: RNCC: 3 | RNVC: 2

11 Feb 2017

3040-01-662-5573
Straight Shaft

016625573
3/4LSSSM: RNCC: 3 | RNVC: 2

11 Apr 2017

3040-01-671-7054
Shouldered Shaft

016717054
110270-1: RNCC: 3 | RNVC: 2

7 Apr 2018

3040-01-685-5680
Rigid Connecting Link

016855680
C200109264: RNCC: 3 | RNVC: 2

30 Dec 2019

3040-01-693-9808
Straight Shaft

016939808
113T1662-291: RNCC: 3 | RNVC: 1

12 Mar 2021

3040-01-694-5595
Rigid Connecting Link

016945595
113T1957-7: RNCC: 3 | RNVC: 1

8 Apr 2021

3040-01-697-5897
Rigid Connecting Link

016975897
175-9079: RNCC: 3 | RNVC: 2

29 Sep 2021

3040-01-630-5044
Rigid Connecting Link

016305044
160037: RNCC: 3 | RNVC: 2

6 Aug 2014

3040-01-632-5634
Shouldered Shaft

016325634
65-1933-25: RNCC: 3 | RNVC: 2

23 Oct 2014

3040-01-649-6321
Manual Control Lever

016496321
12580277: RNCC: 3 | RNVC: 2

5 Nov 2015

3040-01-658-4237
Shaft Collar

016584237
A32010-10: RNCC: 3 | RNVC: 2

26 Sep 2016

3040-01-662-7869
Controllable Swashplate

016627869
4803-3075: RNCC: 3 | RNVC: 2

19 Apr 2017

3040-01-670-5474
Rigid Connecting Link

016705474
220-8262: RNCC: 3 | RNVC: 2

27 Feb 2018

3040-01-674-8037
Linear Actuating Cylinder Cap

016748037
845-7069127-X-9: RNCC: 3 | RNVC: 1

10 Aug 2018

3040-01-685-4470
Straight Shaft

016854470
253T5726-1: RNCC: 3 | RNVC: 2

17 Dec 2019

3040-01-694-8312
Rigid Connecting Link

016948312
113T1957-2: RNCC: 3 | RNVC: 1

27 Apr 2021

3040-01-662-7872
Detent Plate

016627872
4803-315: RNCC: 3 | RNVC: 2

19 Apr 2017

3040-01-631-8652
Rigid Connecting Link

016318652
803-6397269 PC 126: RNCC: 3 | RNVC: 2

29 Sep 2014

3040-01-632-5637
Control Cam Assembly

016325637
65-44065-11: RNCC: 3 | RNVC: 2

23 Oct 2014

3040-01-646-0879
Mechanically Actuated Spindle

016460879
D-WK-879-14-2: RNCC: 3 | RNVC: 2
D-WK-879-14: RNCC: D | RNVC: 9

13 Jul 2015

3040-01-656-1019
Rigid Connecting Link

016561019
273T1409-1: RNCC: 3 | RNVC: 1

17 Jun 2016

3040-01-658-2426
Rigid Connecting Link

016582426
A71008-45: RNCC: 3 | RNVC: 2

19 Sep 2016

3040-01-660-2367
Shouldered Shaft

016602367
MA280037-22: RNCC: 3 | RNVC: 2

11 Jan 2017

3040-01-660-9503
Rigid Connecting Link

016609503
A27118-136: RNCC: 3 | RNVC: 2

9 Feb 2017

3040-01-672-0939
Straight Shaft

016720939
MA470005-25: RNCC: 3 | RNVC: 2

21 Apr 2018

3040-01-660-9049
Rigid Connecting Link

016609049
A55004-18: RNCC: 3 | RNVC: 2

8 Feb 2017

3040-01-652-0149
Linear Actuating Cylinder Assembly

016520149
093-NR: RNCC: 3 | RNVC: 2

8 Feb 2016

3040-01-662-4457
Multiple Gears Gearshaft

016624457
392-13: RNCC: 3 | RNVC: 2

6 Apr 2017

3040-01-672-0936
Linear Actuating Cylinder

016720936
AT-789: RNCC: 3 | RNVC: 2

21 Apr 2018

3040-01-693-8197
Rigid Connecting Link

016938197
69B15978-9: RNCC: 3 | RNVC: 1

6 Mar 2021

3040-01-661-3300
Rigid Connecting Link

016613300
A55004-67: RNCC: 3 | RNVC: 2

27 Feb 2017

3040-01-674-8035
Linear Actuating Cylinder Cap

016748035
845-7069127-X-7: RNCC: 3 | RNVC: 1

10 Aug 2018

3040-01-632-5624
Shouldered Shaft

016325624
141A6306-2: RNCC: 3 | RNVC: 2

23 Oct 2014

3040-01-633-9201
Rigid Connecting Link

016339201
167-8278267 PC 28: RNCC: 3 | RNVC: 1
8278267: RNCC: D | RNVC: 9

9 Dec 2014

3040-01-640-9287
Rigid Connecting Link

016409287
167-8278267 ITEM 27: RNCC: 3 | RNVC: 2
167-8278492 ITEM 14: RNCC: 5 | RNVC: 2

2 Jan 2015

3040-01-653-4451
Pawl Kc 46

016534451
141T6662-2: RNCC: 3 | RNVC: 1

23 Mar 2016

3040-01-659-3096
Nonaircraft Mechanical Actuator

016593096
12153/1S757100020: RNCC: 3 | RNVC: 2

17 Nov 2016

3040-01-659-9381
Mechanical Drive Housing

016599381
02368001: RNCC: 3 | RNVC: 2

22 Dec 2016

3040-01-660-7509
Shaft Collar

016607509
A27118-57: RNCC: 3 | RNVC: 2

1 Feb 2017

3040-01-674-8040
Linear Actuating Cylinder Cap

016748040
845-7069127-X-11: RNCC: 3 | RNVC: 1

10 Aug 2018

3040-01-694-5581
Rigid Connecting Link

016945581
113T1931-3: RNCC: 3 | RNVC: 1

8 Apr 2021

3040-01-697-0408
Control Cable Assembly

016970408
167-7384258-145: RNCC: 3 | RNVC: 2
H547-1905-145: RNCC: 5 | RNVC: 2
515FF02CT121: RNCC: 5 | RNVC: 2

30 Aug 2021

3040-01-656-6082
Rigid Connecting Link

016566082
A49001-69: RNCC: 3 | RNVC: 2

11 Jul 2016

3040-01-662-4479
Rigid Connecting Link

016624479
A27118-119: RNCC: 3 | RNVC: 2

6 Apr 2017

3040-01-674-8039
Linear Actuating Cylinder Cap

016748039
845-7069127-X-10: RNCC: 3 | RNVC: 1

10 Aug 2018

3040-01-695-5060
Breather

016955060
SP12029: RNCC: 3 | RNVC: 2

9 Jun 2021

3040-01-610-5790
Mechanically Actuated Spindle

016105790
F-WK-903-1 PC NO 53: RNCC: 3 | RNVC: 2
F-WK-903-2 PC 53: RNCC: 5 | RNVC: 2

22 Aug 2012

3040-01-575-7065
Pawl

015757065
DAC RP2: RNCC: 3 | RNVC: 2

13 Jul 2009

3040-01-599-3025
Linear Actuating Cylinder Piston Rod

015993025
328-2294: RNCC: 3 | RNVC: 2
328-2294: RNCC: 3 | RNVC: 9

21 Sep 2011

3040-01-601-8181
Worm Shaft

016018181
465-0769: RNCC: 3 | RNVC: 2
465-0769: RNCC: 3 | RNVC: 9

26 Jan 2012

3040-01-608-8165
Piston Ring

016088165
GP6500650-T47: RNCC: 3 | RNVC: 2
10618657: RNCC: 5 | RNVC: 2

12 Jul 2012

3040-01-621-1824
Bevel Gearshaft

016211824
449-040-037-107: RNCC: 3 | RNVC: 2

27 Aug 2013

3040-01-626-8402
Worm Wheel Gearshaft

016268402
6CE-44150-00-00: RNCC: 3 | RNVC: 2

21 Mar 2014

3040-01-560-7755
Multiple Gears Gearshaft

015607755
188873-2: RNCC: 3 | RNVC: 2

12 Feb 2008

3040-01-577-3536
Piston Ring Set

015773536
PH00KH025: RNCC: 3 | RNVC: 2

3 Sep 2009

3040-01-594-7704
Straight Shaft

015947704
68A351120-2003: RNCC: 3 | RNVC: 2

25 Apr 2011

3040-01-598-9292
Straight Shaft

015989292
980034: RNCC: 3 | RNVC: 2

1 Sep 2011

3040-01-611-0036
Shouldered Shaft

016110036
F-WK-903-1 PC NO 20: RNCC: 3 | RNVC: 2
F-WK-903-2 PC 20: RNCC: 5 | RNVC: 2

4 Sep 2012

3040-01-586-3991
Rigid Connecting Link

015863991
B78-050108-30CR: RNCC: 3 | RNVC: 2

28 Jun 2010

3040-01-606-6460
Mechanical Drive Housing Part

016066460
101560: RNCC: 3 | RNVC: 2
100600 F REV F ITEM NO.1: RNCC: 5 | RNVC: 2

22 May 2012

3040-01-609-3474
Rigid Connecting Link

016093474
449-215-001-127: RNCC: 3 | RNVC: 2
449-215-001-127: RNCC: 3 | RNVC: 2
449-215-001-127: RNCC: D | RNVC: 9

24 Jul 2012

3040-01-566-1761
Spur Gearshaft

015661761
3305AS1551-1: RNCC: 3 | RNVC: 2

22 Aug 2008

3040-01-603-1157
Shouldered Shaft

016031157
752-7068433-503: RNCC: 3 | RNVC: 2
H832-0399-503: RNCC: 5 | RNVC: 2

23 Feb 2012

3040-01-608-8037
Shouldered Shaft

016088037
201616-016: RNCC: 3 | RNVC: 2
3922569: RNCC: 5 | RNVC: 2
3922569: RNCC: 5 | RNVC: 9

12 Jul 2012

3040-01-611-0042
Shouldered Shaft

016110042
F-WK-903-1 PC NO 32: RNCC: 3 | RNVC: 2
F-WK-903-2 PC 32: RNCC: 5 | RNVC: 2

4 Sep 2012

3040-01-615-1859
Mechanical Drive Housing

016151859
880686T16: RNCC: 3 | RNVC: 2

3 Jan 2013

3040-01-628-0255
Rigid Connecting Link

016280255
1272-025: RNCC: 3 | RNVC: 2

6 May 2014

3040-01-592-5279
Rigid Connecting Link

015925279
3922AS168-5: RNCC: 3 | RNVC: 2

9 Mar 2011

3040-01-586-4332
Bell Crank

015864332
123LM40561-601: RNCC: 3 | RNVC: 2
123LM40561-601: RNCC: 5 | RNVC: 9

29 Jun 2010

3040-01-611-0023
Shouldered Shaft

016110023
F-WK-903-1PC NO 42: RNCC: 3 | RNVC: 2
F-WK-903-2 PC 42: RNCC: 5 | RNVC: 2

4 Sep 2012

3040-01-616-9522
Pressure Regulator Shaft And Spring Assembly

016169522
15S000812TT890-OC: RNCC: 3 | RNVC: 2
101884-1: RNCC: 5 | RNVC: 2

5 Mar 2013

3040-01-562-9596
Straight Shaft

015629596
S181461PS: RNCC: 3 | RNVC: 2
3KK264: RNCC: 5 | RNVC: 2
3KK264: RNCC: 5 | RNVC: 9
101138PS: RNCC: 5 | RNVC: 9

28 Apr 2008

3040-01-569-6952
Air Motor Rear End Plate

015696952
8-002-232-02-30B: RNCC: 3 | RNVC: 2

8 Dec 2008

3040-01-573-9883
Linear Actuating Cylinder Assembly

015739883
BB277679A0: RNCC: 3 | RNVC: 2
BB277679AA: RNCC: 5 | RNVC: 2

12 May 2009

3040-01-598-4001
Rigid Connecting Link

015984001
C01V10142: RNCC: 3 | RNVC: 2

28 Jul 2011

3040-01-611-0029
Shouldered Shaft

016110029
F-WK-903-1 PC NO 19: RNCC: 3 | RNVC: 2
F-WK-903-2 PC 19: RNCC: 5 | RNVC: 2

4 Sep 2012

3040-01-616-9526
Pressure Regulator Shaft And Spring Assembly

016169526
T10-100-300-T-T-SS220LBS-OC: RNCC: 3 | RNVC: 2
101224-1: RNCC: 5 | RNVC: 2

5 Mar 2013

3040-01-561-9260
Shouldered Shaft

015619260
DN60-8-19: RNCC: 3 | RNVC: 2
DN60-8-19: RNCC: 3 | RNVC: 9
DNX62-6R8-00B ITEM NO 30: RNCC: 5 | RNVC: 2
DNX62-6R8-00B ITEM NO 30: RNCC: 5 | RNVC: 9

24 Mar 2008

3040-01-584-1477
Manual Control Lever

015841477
13465ZY: RNCC: 3 | RNVC: 2

19 Apr 2010

3040-01-585-2859
Rigid Connecting Link

015852859
B78-050108-30SRH: RNCC: 3 | RNVC: 2

21 May 2010

3040-01-594-7481
Shouldered Shaft

015947481
2532996315: RNCC: 3 | RNVC: 2
2532996-315: RNCC: 3 | RNVC: 2

25 Apr 2011

3040-01-567-3520
Counterbalance Weight

015673520
87626717: RNCC: 3 | RNVC: 2
87726842: RNCC: 3 | RNVC: 9

24 Sep 2008

3040-01-572-5395
Shaft Collar

015725395
064-48412-000: RNCC: 3 | RNVC: 2
364-51227-000 ITEM 21C: RNCC: 5 | RNVC: 2

13 Mar 2009

3040-01-579-1834
Rigid Connecting Link

015791834
212-010-403-107: RNCC: 3 | RNVC: 2

3 Nov 2009

3040-01-618-6484
Linear Actuating Cylinder Assembly

016186484
257366: RNCC: 3 | RNVC: 2
257366-D: RNCC: D | RNVC: 9

30 Apr 2013

3040-01-619-0668
Linear Actuating Cylinder Assembly

016190668
242640: RNCC: 3 | RNVC: 2
242650: RNCC: 5 | RNVC: 9

15 May 2013

3040-01-620-5533
Rigid Connecting Link

016205533
3922AS168-10: RNCC: 3 | RNVC: 2

30 Jul 2013

3040-01-623-1903
Shouldered Shaft Assembly

016231903
9-38985-501: RNCC: 3 | RNVC: 2
9-38985-501: RNCC: 3 | RNVC: 2
9-38985-501: RNCC: 3 | RNVC: 2
9-38985-501: RNCC: 3 | RNVC: 2
9-38985-501: RNCC: 3 | RNVC: 2
9-38985-501: RNCC: 3 | RNVC: 2
9-38985-501: RNCC: 3 | RNVC: 2
9-38985-501: RNCC: 3 | RNVC: 2
9-38985-501: RNCC: 3 | RNVC: 2
9-38985-501: RNCC: 3 | RNVC: 2

4 Nov 2013

3040-01-577-3539
Piston Ring Set

015773539
PH00LH025: RNCC: 3 | RNVC: 2

3 Sep 2009

3040-01-585-2862
Rigid Connecting Link

015852862
B78-050108-30SRL: RNCC: 3 | RNVC: 2

21 May 2010

3040-01-594-7054
Body Hub

015947054
351-9778: RNCC: 3 | RNVC: 2
CV182301: RNCC: 5 | RNVC: 2
351-9778: RNCC: 5 | RNVC: 2

25 Apr 2011

3040-01-602-0311
Sound Recorder-Reproducer Subassembly

016020311
185652: RNCC: 3 | RNVC: 2
20809009 REV H ITEM 1: RNCC: 5 | RNVC: 2

26 Jan 2012

3040-01-617-1269
Rigid Connecting Link

016171269
061946: RNCC: 3 | RNVC: 2

12 Mar 2013

3040-01-618-7542
Linear Actuating Cylinder Assembly

016187542
415816: RNCC: 3 | RNVC: 2

3 May 2013

3040-01-618-8414
Shaft Collar

016188414
2096390: RNCC: 3 | RNVC: 2
2096390-D: RNCC: D | RNVC: 9

8 May 2013

3040-01-582-4901
Linear Actuating Cylinder Assembly

015824901
6811994: RNCC: 3 | RNVC: 2

23 Feb 2010

3040-01-610-5743
Mechanically Actuated Spindle

016105743
F-WK-903-1 PC NO 52: RNCC: 3 | RNVC: 2
F-WK-903-2 PC 52: RNCC: 5 | RNVC: 2

22 Aug 2012

3040-01-615-2135
Controllable Swashplate

016152135
6022840-002: RNCC: 3 | RNVC: 2
28KP079: RNCC: 5 | RNVC: 2
28KP079: RNCC: 5 | RNVC: 9

4 Jan 2013

3040-01-576-8635
Linear Actuating Cylinder Piston Rod

015768635
365-06002-000: RNCC: 3 | RNVC: 2
377-03395 ITEM 35EA: RNCC: 5 | RNVC: 2
365-06002D: RNCC: 5 | RNVC: 9

18 Aug 2009

3040-01-606-7804
Mechanical Drive Housing Part

016067804
101559: RNCC: 3 | RNVC: 2
100600 F REV F ITEM NO.2: RNCC: 5 | RNVC: 2

23 May 2012

3040-01-572-3544
Hub Clamp

015723544
1645043: RNCC: 3 | RNVC: 2
407803: RNCC: 5 | RNVC: 9

9 Mar 2009

3040-01-627-4942
Shouldered Shaft

016274942
PG-5096-00: RNCC: 3 | RNVC: 2

16 Apr 2014

3040-01-575-4788
Worm Wheel Gearshaft

015754788
5001582: RNCC: 3 | RNVC: 2

2 Jul 2009

3040-01-589-7301
Shouldered Shaft

015897301
13020341: RNCC: 3 | RNVC: 2

3 Nov 2010

3040-01-608-3751
Shouldered Shaft

016083751
775-34057-7: RNCC: 3 | RNVC: 2

25 Jun 2012

3040-01-610-5801
Mechanically Actuated Spindle

016105801
F-WK-903-1 PC NO 51: RNCC: 3 | RNVC: 2
F-WK-903-2 PC 51: RNCC: 5 | RNVC: 2

22 Aug 2012

3040-01-611-1046
Straight Shaft

016111046
F-WK-903-1 PC NO 21: RNCC: 3 | RNVC: 2
F-WK-903-2 PC 21: RNCC: 5 | RNVC: 2

6 Sep 2012

3040-01-624-5512
Shouldered Shaft

016245512
709-4457200-25/PY74201: RNCC: 3 | RNVC: 2

7 Jan 2014

3040-01-524-7601
Hub Clamp

015247601
6K8897: RNCC: 3 | RNVC: 2

15 Oct 2004

3040-01-526-1504
Linear Actuating Cylinder Assembly

015261504
52209: RNCC: 3 | RNVC: 2

9 Dec 2004

3040-01-517-3722
Rigid Connecting Link

015173722
A6003-LPD-287 PC 28: RNCC: 3 | RNVC: 2
A6003-LPD-287 PC 38 DETAIL 22-C: RNCC: 5 | RNVC: 9
A6003-LPD-287: RNCC: D | RNVC: 9

6 Feb 2004

3040-01-520-9929
Flexible Drive Shaft

015209929
1605740-0252: RNCC: 3 | RNVC: 2
2102201 SH 88 ITEM NO 2: RNCC: 5 | RNVC: 2

4 Jun 2004

3040-01-522-0863
Helical Gear And Shaft Assembly

015220863
15932003-1: RNCC: 3 | RNVC: 9
15932003 DASH 1: RNCC: 5 | RNVC: 2
15931300 FIND NO. 25: RNCC: 5 | RNVC: 2
15932003-1: RNCC: 5 | RNVC: 2
15931300 FIND NO. 25: RNCC: 5 | RNVC: 9
15932003 DASH 1: RNCC: 5 | RNVC: 9

19 Jul 2004

3040-01-551-8602
Headless Straight Pin

015518602
HM025-207-5: RNCC: 3 | RNVC: 2

30 May 2007

3040-01-553-8269
Aircra Planet Shaft

015538269
189046-1: RNCC: 3 | RNVC: 2

26 Jul 2007

3040-01-553-5217
Straight Shaft

015535217
326307-9: RNCC: 3 | RNVC: 2
326307-9: RNCC: 3 | RNVC: 9

18 Jul 2007

3040-01-546-2031
Nonvehicular Universal Joint

015462031
12592885: RNCC: 3 | RNVC: 2
12591846: RNCC: E | RNVC: 8

8 Dec 2006

3040-01-550-3813
Linear Actuating Cylinder Assembly

015503813
H-72BN-00325-01950-01375-S119: RNCC: 3 | RNVC: 9
D-WK-871-36 PC1: RNCC: 5 | RNVC: 2
D-WK-871-37 PC1: RNCC: 5 | RNVC: 2
D-WK-871-62: RNCC: 5 | RNVC: 2

18 Apr 2007

3040-01-554-8952
Shaft Collar

015548952
4P-8038: RNCC: 3 | RNVC: 2
4P-8038: RNCC: 5 | RNVC: 2

22 Aug 2007

3040-01-512-6627
Shouldered Shaft

015126627
A107592-101-11: RNCC: 3 | RNVC: 9
CPRI-FB Q15487B: RNCC: 5 | RNVC: 2
A107514-101-11 ITEM 5: RNCC: 5 | RNVC: 9
A107592-101-11: RNCC: C | RNVC: 1
A107514-101-11 ITEM 5: RNCC: C | RNVC: 1

8 Sep 2003

3040-01-513-8340
Spur Gearshaft

015138340
C310072998: RNCC: 3 | RNVC: 2
C310072998: RNCC: 5 | RNVC: 9

7 Oct 2003

3040-01-516-1637
Straight Shaft

015161637
L43153P01: RNCC: 3 | RNVC: 2
390002-D-66: RNCC: 5 | RNVC: 9
39002-D-66: RNCC: 5 | RNVC: 9
L43153: RNCC: D | RNVC: 9

22 Dec 2003

3040-01-536-2797
Manual Control Lever

015362797
82349390-22: RNCC: 3 | RNVC: 2
GS04545 REV A ITEM 22: RNCC: 5 | RNVC: 2

27 Dec 2005

3040-01-538-2205
Flexible Shaft Assembly

015382205
6253K51: RNCC: 3 | RNVC: 2

15 Mar 2006

3040-01-520-9913
Flexible Drive Shaft

015209913
1605740-0060: RNCC: 3 | RNVC: 2
2102201 SH 38 ITEM NO 1: RNCC: 5 | RNVC: 2

4 Jun 2004

3040-01-524-4057
Linear Actuating Cylinder Assembly Parts Kit

015244057
PK602HK001: RNCC: 3 | RNVC: 2

30 Sep 2004

Load More Results