What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 157 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 157 of 300

NSN 3040-01-238-8827 012388827 LEVER,REMOTE CONTROL

3040-01-238-8827
Remote Control Lever

012388827
842643: RNCC: 3 | RNVC: 2

21 Aug 1986

NSN 3040-00-046-5139 000465139 WORM SHAFT

3040-00-046-5139
Worm Shaft

000465139
4445119: RNCC: 3 | RNVC: 2
4445119: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-147-8741
Clamp

001478741
197788: RNCC: 3 | RNVC: 2

22 Sep 1971

NSN 3040-01-189-1637 011891637 BALL JOINT

3040-01-189-1637
Ball Joint

011891637
227-0082: RNCC: 3 | RNVC: 2
5740551: RNCC: 3 | RNVC: 2
227-0024: RNCC: 5 | RNVC: 9
227-0027: RNCC: 5 | RNVC: 9
3040011891637: RNCC: 6 | RNVC: 9

12 Sep 1984

NSN 3040-01-457-2085 014572085 CYLINDER,ACTUATING,LINEAR

3040-01-457-2085
Linear Actuating Cylinder

014572085
WR-15: RNCC: 3 | RNVC: 9

16 Jul 1998

NSN 3040-00-470-1205 004701205 PISTON,LINEAR ACTUATING CYLINDER

3040-00-470-1205
Linear Actuating Cylinder Piston

004701205
B26342-1: RNCC: 3 | RNVC: 2

17 Jun 1987

NSN 3040-00-076-0046 000760046 LEVER,REMOTE CONTROL

3040-00-076-0046
Remote Control Lever

000760046
10885462: RNCC: 3 | RNVC: 2

1 Jan 1963

NSN 3040-01-524-9307 015249307 CYLINDER ASSEMBLY,ACTUATING,LINEAR

3040-01-524-9307
Linear Actuating Cylinder Assembly

015249307
RC-2512: RNCC: 3 | RNVC: 9
RC-2512: RNCC: 5 | RNVC: 2
RC-2512: RNCC: 5 | RNVC: 9

21 Oct 2004

NSN 3040-00-133-9715 001339715 LEVER,REMOTE CONTROL

3040-00-133-9715
Remote Control Lever

001339715
11615378: RNCC: 3 | RNVC: 2

21 Aug 1968

NSN 3040-00-065-5132 000655132 GEARSHAFT,SPUR

3040-00-065-5132
Spur Gearshaft

000655132
8036: RNCC: 3 | RNVC: 9

1 Jan 1963

NSN 3040-01-113-4475 011134475 COLLAR TOE

3040-01-113-4475
Collar Toe

011134475
A-20: RNCC: 3 | RNVC: 9

27 May 1981

NSN 3040-00-701-5408 007015408 LEVER,REMOTE CONTROL

3040-00-701-5408
Remote Control Lever

007015408
7015408: RNCC: 3 | RNVC: 2

1 Jan 1963

NSN 3040-00-670-6884 006706884 BELL CRANK

3040-00-670-6884
Bell Crank

006706884
56B23266-1: RNCC: 3 | RNVC: 9
56B23266-1: RNCC: 5 | RNVC: 2
63D52617-1: RNCC: 5 | RNVC: 9
56B23266-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-653-5179
Detent Assembly

016535179
129607-1: RNCC: 3 | RNVC: 1

26 Mar 2016

3040-01-658-7064
Rigid Connecting Link

016587064
A32029-17: RNCC: 3 | RNVC: 2

12 Oct 2016

3040-01-677-0527
Shouldered Shaft

016770527
6-27063-501: RNCC: 3 | RNVC: 2

27 Nov 2018

3040-01-663-0370
Linear Actuating Cylinder Assembly

016630370
RR-3014: RNCC: 3 | RNVC: 2

24 Apr 2017

3040-01-658-5447
Mechanically Actuated Spindle

016585447
A52032-21: RNCC: 3 | RNVC: 2
A52032-14: RNCC: 5 | RNVC: 9

1 Oct 2016

3040-01-675-8264
Shouldered Shaft

016758264
588 99 24-01: RNCC: 3 | RNVC: 2

28 Sep 2018

3040-01-658-4234
Rigid Connecting Link

016584234
A32006-80: RNCC: 3 | RNVC: 2

26 Sep 2016

3040-01-649-4717
Nonaircraft Mechanical Actuator

016494717
7A70049: RNCC: 3 | RNVC: 2
7A10007 REV B NO 6: RNCC: 5 | RNVC: 2

29 Oct 2015

3040-01-658-3886
Rigid Connecting Link

016583886
A32006-79: RNCC: 3 | RNVC: 2

24 Sep 2016

3040-01-656-5152
Rigid Connecting Link

016565152
A49001-60: RNCC: 3 | RNVC: 2

6 Jul 2016

3040-01-660-7495
Rigid Connecting Link

016607495
A27118-43: RNCC: 3 | RNVC: 2

1 Feb 2017

3040-01-660-7507
Rigid Connecting Link

016607507
A27118-31: RNCC: 3 | RNVC: 2

1 Feb 2017

3040-01-596-6454
Spider Assembly

015966454
2021-M80: RNCC: 3 | RNVC: 2

20 May 2011

3040-01-597-2979
Electrical Act Assy

015972979
12273-S749-300: RNCC: 3 | RNVC: 2

6 Jun 2011

3040-01-598-7738
Auger Extension

015987738
1001973: RNCC: 3 | RNVC: 2

26 Aug 2011

3040-01-574-9594
Linear Actuating Cylinder

015749594
SAE-8208: RNCC: 3 | RNVC: 2
SAE-8208: RNCC: 5 | RNVC: 2
SAE-8208: RNCC: 5 | RNVC: 2

16 Jun 2009

3040-01-517-9932
Rigid Connecting Link

015179932
7085-1: RNCC: 3 | RNVC: 2
SR11479A-2205: RNCC: 5 | RNVC: 9
LE162-0047-2205: RNCC: 7 | RNVC: 2

26 Feb 2004

3040-01-521-6441
Push-Pull Control Assembly

015216441
CCX63329: RNCC: 3 | RNVC: 2
CC63329: RNCC: 3 | RNVC: 9

28 Jun 2004

3040-01-539-9299
Shouldered Shaft

015399299
12441882-2: RNCC: 3 | RNVC: 2
12441882-002: RNCC: 5 | RNVC: 9
12441882: RNCC: D | RNVC: 9

4 May 2006

3040-01-563-4506
Body Hub

015634506
8242879-2: RNCC: 3 | RNVC: 2

12 May 2008

3040-01-518-6836
Carriage Assembly

015186836
EJ-22158: RNCC: 3 | RNVC: 2
EJ-52022 ITEM 8: RNCC: 7 | RNVC: 2
EJ-52022: RNCC: D | RNVC: 9

19 Mar 2004

3040-01-484-9683
Shouldered Shaft

014849683
74D295018-1003: RNCC: 3 | RNVC: 2
74D295018: RNCC: D | RNVC: 9

11 May 2001

3040-01-496-0131
Pawl

014960131
167-7106770-13: RNCC: 3 | RNVC: 2
H547-0264-13: RNCC: 5 | RNVC: 2
167-7106770: RNCC: D | RNVC: 9
H547-0264: RNCC: D | RNVC: 9

29 Mar 2002

3040-01-486-4314
Shouldered Shaft

014864314
342-7067322-69: RNCC: 3 | RNVC: 2
H643-7003-69: RNCC: 5 | RNVC: 2
H643-7003: RNCC: D | RNVC: 9
7067322: RNCC: D | RNVC: 9

28 Jun 2001

3040-01-455-3585
Rigid Connecting Link

014553585
74A182201-1004: RNCC: 3 | RNVC: 2

30 Apr 1998

3040-01-395-0519
Housing Adapter

013950519
810714X: RNCC: 3 | RNVC: 2
3040PL0836935: RNCC: 6 | RNVC: 9

19 Aug 1994

3040-01-415-6640
Nonaircraft Mechanical Actuator

014156640
B-800-22002-11: RNCC: 3 | RNVC: 2
22002-11: RNCC: 5 | RNVC: 2
22002-11: RNCC: 5 | RNVC: 2

30 Jun 1995

3040-01-352-9125
Linear Actuating Cylinder Assembly

013529125
6-372-003441: RNCC: 3 | RNVC: 2
2HG4: RNCC: C | RNVC: 1

1 Feb 1992

3040-01-338-4423
Shouldered Shaft

013384423
23013367: RNCC: 3 | RNVC: 2

3 May 1991

3040-01-339-5625
Nonaircraft Mechanical Actuator

013395625
10069C001: RNCC: 1 | RNVC: 2
7236: RNCC: 3 | RNVC: 2
10069C001: RNCC: 5 | RNVC: 9

23 May 1991

3040-01-370-0230
Linear Actuating Cylinder Assembly

013700230
6-372-003453: RNCC: 3 | RNVC: 2
6-372-003453: RNCC: 5 | RNVC: 2
6-372-003453: RNCC: 5 | RNVC: 2

11 Jan 1993

3040-01-312-1352
Linear Actuating Cylinder Piston

013121352
220812TD1: RNCC: 3 | RNVC: 2
220812TD1: RNCC: 3 | RNVC: 9
220812TD1: RNCC: 5 | RNVC: 9
11025012: RNCC: 5 | RNVC: 9

12 Dec 1989

3040-01-287-7725
Shouldered Shaft

012877725
GJ-480A: RNCC: 3 | RNVC: 2
G5-480A: RNCC: 5 | RNVC: 9

27 Oct 1988

3040-01-296-0526
Linear Actuating Cylinder Piston Rod

012960526
309-9041: RNCC: 3 | RNVC: 2
10524014: RNCC: 5 | RNVC: 2

16 Mar 1989

3040-01-306-6924
Shouldered Shaft

013066924
219F440: RNCC: 3 | RNVC: 2

29 Aug 1989

3040-01-270-5695
Carrier Assembly

012705695
M2132-101: RNCC: 3 | RNVC: 2
P002059: RNCC: 5 | RNVC: 2
M2132-101: RNCC: 5 | RNVC: 9
M2132-101: RNCC: 5 | RNVC: 9
M2132-101: RNCC: 5 | RNVC: 9

9 Jan 1988

3040-01-270-6392
Manual Control Lever

012706392
EL060-53300: RNCC: 3 | RNVC: 2
EL060-53300: RNCC: 3 | RNVC: 9
EL060-53300: RNCC: 5 | RNVC: 9

11 Jan 1988

3040-01-234-4963
Linear Actuating Cylinder Assembly

012344963
GG094616A0: RNCC: 3 | RNVC: 2
1 1/2CFH-2HLTS13CX82.000: RNCC: 5 | RNVC: 9

14 Jun 1986

3040-01-226-0406
Push-Pull Control Assembly

012260406
B-2287-34VM: RNCC: 3 | RNVC: 1
B-2287-34: RNCC: 5 | RNVC: 2
B-2287-34: RNCC: 5 | RNVC: 9

11 Feb 1986

3040-01-249-3387
Shouldered Shaft

012493387
656C0496G024A: RNCC: 3 | RNVC: 2
656C0496C024A: RNCC: 5 | RNVC: 9

10 Feb 1987

3040-01-252-3798
Brake Band And Lining

012523798
5210331: RNCC: 3 | RNVC: 2
5210331: RNCC: 5 | RNVC: 2
35545375B0331: RNCC: 5 | RNVC: 2
5210331: RNCC: 5 | RNVC: 2
5210331: RNCC: 5 | RNVC: 9

1 Apr 1987

3040-01-239-7679
Body Hub

012397679
12313344: RNCC: 3 | RNVC: 2

4 Sep 1986

3040-01-226-0411
Push-Pull Control Assembly

012260411
B-2287-16: RNCC: 3 | RNVC: 2
B-2287-16VM: RNCC: 5 | RNVC: 2

11 Feb 1986

3040-01-193-3338
Control Cam

011933338
2361994: RNCC: 3 | RNVC: 2
2361994: RNCC: 3 | RNVC: 9

1 Nov 1984

3040-01-203-8547
Shaft Collar

012038547
SC25 67699: RNCC: 3 | RNVC: 2
37204 SC25: RNCC: 5 | RNVC: 9
9290948: RNCC: 7 | RNVC: 2

20 Mar 1985

3040-01-168-0525
Straight Shaft

011680525
11592657: RNCC: 3 | RNVC: 2

10 Dec 1983

3040-01-125-8917
Bell Crank

011258917
74A615604-1001: RNCC: 3 | RNVC: 2
74A615604-1001: RNCC: 5 | RNVC: 2
10106828: RNCC: 6 | RNVC: 9

1 Feb 1982

3040-01-131-5791
Linear Actuating Cylinder Assembly Parts Kit

011315791
9-752-100135: RNCC: 3 | RNVC: 2

13 May 1982

3040-01-163-0716
Straight Shaft

011630716
3231906-1: RNCC: 3 | RNVC: 2
3231906-1: RNCC: 5 | RNVC: 2
3231906-1: RNCC: 5 | RNVC: 2
3231906-1: RNCC: 5 | RNVC: 9
3231906-1: RNCC: 5 | RNVC: 9
3231906: RNCC: D | RNVC: 9

27 Sep 1983

3040-01-058-5185
Rigid Connecting Link

010585185
162D622203-1001: RNCC: 3 | RNVC: 2
162D622203-1001: RNCC: 5 | RNVC: 2
160D622203-1: RNCC: 5 | RNVC: 9
160D622203-1: RNCC: C | RNVC: 1

28 Mar 1978

3040-01-053-0053
Bell Crank

010530053
C114923-1: RNCC: 3 | RNVC: 2
C114923-1: RNCC: 5 | RNVC: 9

23 Dec 1977

3040-00-966-5047
Counterbalance Weight

009665047
473856CL8: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-936-5301
Linear Actuating Cylinder Piston

009365301
6772349: RNCC: 3 | RNVC: 2
3040009365301: RNCC: 5 | RNVC: 9

8 Mar 1967

3040-00-734-5286
Mechanical Drive Housing

007345286
8351684: RNCC: 3 | RNVC: 2
8351684: RNCC: 5 | RNVC: 2
3040007345286: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-610-1431
Rigid Connecting Link

006101431
90-3220-3: RNCC: 3 | RNVC: 2
90-3220-3: RNCC: 5 | RNVC: 2
90-3220-3: RNCC: 5 | RNVC: 2
90-3220-3: RNCC: 5 | RNVC: 2
90-3220-3: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-781-8049
Nonrotating Shaft Eye Bracket

007818049
10932312: RNCC: 3 | RNVC: 2

12 Jan 1968

3040-00-782-4189
Rigid Connecting Link

007824189
10942862-1: RNCC: 3 | RNVC: 2
3040007824189: RNCC: 5 | RNVC: 9
10942862-1: RNCC: 8 | RNVC: 2

19 Feb 1968

3040-00-592-1419
Thrust Bearing Shoe

005921419
3-7-8-4770-2: RNCC: 3 | RNVC: 2
464770PC2T04: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-00-435-0870
Spur Gearshaft

004350870
C5A27979: RNCC: 3 | RNVC: 2
C5A27979: RNCC: 3 | RNVC: 9
C5A27979: RNCC: 5 | RNVC: 2

14 Mar 1969

3040-00-355-0342
Shouldered Shaft

003550342
40-414-238: RNCC: 3 | RNVC: 9
40-414-238: RNCC: 5 | RNVC: 2

6 Feb 1974

3040-00-119-2646
Thrust Bearing Shoe

001192646
463125PC2T04: RNCC: 3 | RNVC: 2
464000PC2T04: RNCC: 5 | RNVC: 2
F3209097PC2T04: RNCC: 5 | RNVC: 2
9-2986-4: RNCC: 5 | RNVC: 2
463848PC1T03: RNCC: 5 | RNVC: 2
464000: RNCC: D | RNVC: 9

1 Jan 1963

3040-01-661-1008
Bell Crank

016611008
751-7072622-1: RNCC: 3 | RNVC: 2
7072622-1: RNCC: 5 | RNVC: 2

16 Feb 2017

3040-01-355-5177
Linear Actuating Cylinder Piston

013555177
075001244-000: RNCC: 3 | RNVC: 2

19 Mar 1992

3040-01-343-3657
Shouldered Shaft

013433657
83804: RNCC: 3 | RNVC: 2

12 Aug 1991

3040-01-257-8553
Linear Actuating Cylinder Assembly

012578553
H1489B: RNCC: 3 | RNVC: 2
PH-1489B: RNCC: 5 | RNVC: 9
0491D0005: RNCC: C | RNVC: 1

25 Jun 1987

3040-01-051-4932
Pawl

010514932
367086-1: RNCC: 3 | RNVC: 2
87003: RNCC: 5 | RNVC: 2

2 Dec 1977

3040-00-798-6243
Spur Gearshaft

007986243
695201: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-01-615-1273
Counterbalance Weight

016151273
7-5R2430112-001: RNCC: 3 | RNVC: 2

31 Dec 2012

3040-01-596-0858
Rigid Connecting Link

015960858
7548088-71: RNCC: 3 | RNVC: 2

11 May 2011

3040-01-651-3260
Counterbalance Weight

016513260
6631732-1: RNCC: 3 | RNVC: 2
6631732: RNCC: D | RNVC: 9

13 Jan 2016

3040-01-593-2788
Hydraulic Control Assembly

015932788
145K433G01: RNCC: 3 | RNVC: 2

6 Apr 2011

3040-01-618-9591
Rigid Connecting Link

016189591
65C18552-514: RNCC: 3 | RNVC: 2
65C18552-514: RNCC: 5 | RNVC: 2
65C18552-514: RNCC: 5 | RNVC: 2
65C18552-514: RNCC: 5 | RNVC: 2
65C18552-514: RNCC: 5 | RNVC: 2

13 May 2013

3040-01-584-9320
Shouldered Shaft

015849320
449-040-643-101: RNCC: 3 | RNVC: 2
449-040-643: RNCC: D | RNVC: 9

11 May 2010

3040-01-608-5572
Rigid Connecting Link

016085572
200811257-30: RNCC: 3 | RNVC: 2

2 Jul 2012

3040-01-592-8380
Transmission Fluid Cooler

015928380
11-913: RNCC: 3 | RNVC: 2

22 Mar 2011

3040-01-667-5390
Straight Shaft

016675390
12569772: RNCC: 3 | RNVC: 2

20 Oct 2017

3040-01-661-6368
Bell Crank End Cap

016616368
751-7072632-1: RNCC: 3 | RNVC: 2
7072632-1: RNCC: 5 | RNVC: 2

10 Mar 2017

3040-01-620-2390
Shouldered Shaft

016202390
122E1058-G03: RNCC: 3 | RNVC: 2
122E1058G03: RNCC: 3 | RNVC: 9
122E1097-G01ITEM31: RNCC: 5 | RNVC: 9

11 Jul 2013

3040-01-665-6577
Manual Control Lever Assembly

016656577
1051E-11: RNCC: 3 | RNVC: 2

8 Aug 2017

3040-01-595-5211
Mechanically Actuated Spindle

015955211
BFM103110: RNCC: 3 | RNVC: 2

29 Apr 2011

3040-01-619-6996
Nonaircraft Mechanical Actuator

016196996
41737-1: RNCC: 3 | RNVC: 2
41737-1: RNCC: 5 | RNVC: 9
SK41737: RNCC: 5 | RNVC: 9
SK41737: RNCC: D | RNVC: 9

13 Jun 2013

3040-01-633-7573
Pivot Shaft Assembly

016337573
3591293: RNCC: 3 | RNVC: 2

3 Dec 2014

3040-01-590-8056
Linear Actuating Cylinder

015908056
52720786: RNCC: 3 | RNVC: 2
24KP266: RNCC: 5 | RNVC: 2
24KP266: RNCC: 5 | RNVC: 9
9904663: RNCC: D | RNVC: 9

22 Dec 2010

3040-01-612-7613
Breather

016127613
5I-7725: RNCC: 3 | RNVC: 2

19 Oct 2012

3040-01-627-6915
Planetary Gears Carrier

016276915
24241408: RNCC: 3 | RNVC: 2
5717742: RNCC: 3 | RNVC: 2

23 Apr 2014

3040-01-648-6004
Flexible Drive Shaft

016486004
AUC13584: RNCC: 3 | RNVC: 2
AM142316: RNCC: 5 | RNVC: 9

29 Sep 2015

3040-01-585-9411
Handle Shaft

015859411
10014471: RNCC: 3 | RNVC: 2
10014471: RNCC: 7 | RNVC: 2

11 Jun 2010

3040-01-689-0397
Flexible Shaft Assembly

016890397
22001-100: RNCC: 3 | RNVC: 2
22001-100X6FT8IN: RNCC: 3 | RNVC: 9
22001-100X80INN: RNCC: 5 | RNVC: 9
22001: RNCC: D | RNVC: 9

3 Jun 2020

3040-01-644-8602
Mechanical Drive Housing

016448602
13054983: RNCC: 1 | RNVC: 2
291223A: RNCC: 3 | RNVC: 2

22 May 2015

3040-01-682-3530
Gearbox Parts Kit

016823530
CYLS000000257: RNCC: 3 | RNVC: 2
CYLS000000257: RNCC: 5 | RNVC: 9

2 Aug 2019

3040-01-610-0105
Shouldered Shaft

016100105
1810090-2: RNCC: 3 | RNVC: 2

8 Aug 2012

3040-01-593-5375
Straight Shaft Assembly

015935375
177K413G01: RNCC: 3 | RNVC: 2

11 Apr 2011

3040-01-603-0282
Rigid Connecting Link

016030282
497-5898: RNCC: 3 | RNVC: 2

17 Feb 2012

3040-01-654-6677
Bell Crank

016546677
1722: RNCC: 3 | RNVC: 2
1722: RNCC: 5 | RNVC: 2

5 May 2016

3040-01-597-1408
Shouldered Shaft

015971408
MK4104101: RNCC: 3 | RNVC: 2

31 May 2011

3040-01-632-5962
Push-Pull Control Assembly

016325962
96159-402: RNCC: 3 | RNVC: 2

23 Oct 2014

3040-01-596-5577
Shouldered Shaft

015965577
060-31-621: RNCC: 3 | RNVC: 2

19 May 2011

3040-01-596-0247
Ball Joint

015960247
85043-7: RNCC: 3 | RNVC: 2
20933AF001 FIND NO.103: RNCC: 5 | RNVC: 2
198027: RNCC: 5 | RNVC: 2

10 May 2011

3040-01-563-5006
Shouldered Shaft

015635006
98006A0622: RNCC: 3 | RNVC: 2
98006A0622: RNCC: 3 | RNVC: 9
98006A0622: RNCC: 5 | RNVC: 2

13 May 2008

3040-01-570-7576
Rigid Connecting Link

015707576
3943533: RNCC: 3 | RNVC: 2
3778399: RNCC: 5 | RNVC: 9
3676748: RNCC: 5 | RNVC: 9
3943533: RNCC: 5 | RNVC: 9

13 Jan 2009

3040-01-565-9029
Rigid Connecting Link

015659029
IM-LCS1-004: RNCC: 3 | RNVC: 2

12 Aug 2008

3040-01-584-2690
Shouldered Shaft

015842690
214-040-613-101: RNCC: 3 | RNVC: 2

21 Apr 2010

3040-01-588-7651
Shoe Type Brake

015887651
3807385: RNCC: 3 | RNVC: 2
3807385: RNCC: 5 | RNVC: 9
K035097: RNCC: 5 | RNVC: 9
K043189: RNCC: 5 | RNVC: 9

1 Oct 2010

3040-01-552-2225
Straight Shaft

015522225
26010803812: RNCC: 3 | RNVC: 9
028147-004: RNCC: 5 | RNVC: 9
028147-004: RNCC: C | RNVC: 1
26010803812: RNCC: C | RNVC: 1

8 Jun 2007

3040-01-564-0914
Rigid Connecting Link

015640914
803-6397268 PC 166: RNCC: 3 | RNVC: 2

4 Jun 2008

3040-01-527-4621
Push-Pull Control Assembly

015274621
615MV003-336M: RNCC: 3 | RNVC: 2

3 Feb 2005

3040-01-571-0329
Straight Shaft

015710329
080-31-811: RNCC: 3 | RNVC: 2
2-262: RNCC: 5 | RNVC: 9

22 Jan 2009

3040-01-568-1067
Spline Adapter

015681067
6040700: RNCC: 3 | RNVC: 2

21 Oct 2008

3040-01-563-9211
Rigid Connecting Link

015639211
803-6397268 PC 192: RNCC: 3 | RNVC: 2

29 May 2008

3040-01-527-4411
Push-Pull Control Assembly

015274411
615MV003-537M: RNCC: 3 | RNVC: 2

2 Feb 2005

3040-01-606-1069
Rigid Connecting Link

016061069
449-210-012-105: RNCC: 3 | RNVC: 2
449-210-012-105: RNCC: 5 | RNVC: 2

8 May 2012

3040-01-583-6511
Manual Control Lever

015836511
845-8219247-D1-DLNA-071: RNCC: 3 | RNVC: 2
845-8219247 ITEM 71: RNCC: 5 | RNVC: 2
845-8219247-D1-DLNA-071: RNCC: 5 | RNVC: 2

31 Mar 2010

3040-01-563-9219
Rigid Connecting Link

015639219
803-6397268 PC 190: RNCC: 3 | RNVC: 2

29 May 2008

3040-01-588-7354
Rigid Connecting Link

015887354
6444675-01M1: RNCC: 3 | RNVC: 2
6444675-01M1: RNCC: 3 | RNVC: 2
6444675-01M1: RNCC: 3 | RNVC: 9
6444675-01M1: RNCC: 5 | RNVC: 2

30 Sep 2010

3040-01-579-6560
Shouldered Shaft

015796560
12537486: RNCC: 3 | RNVC: 2
12537486-1: RNCC: 5 | RNVC: 9
12537486: RNCC: D | RNVC: 9

19 Nov 2009

3040-01-552-9998
Manual Control Lever

015529998
S23-12325-5: RNCC: 3 | RNVC: 2
013-70686-0 BALLOON NO 64: RNCC: 5 | RNVC: 2

2 Jul 2007

3040-01-564-0932
Rigid Connecting Link

015640932
803-6397268 PC 198: RNCC: 3 | RNVC: 2

4 Jun 2008

3040-01-570-5503
Linear Actuating Cylinder Piston Rod

015705503
A8-D3296: RNCC: 3 | RNVC: 2
D3297 ITEM 9: RNCC: 5 | RNVC: 2

6 Jan 2009

3040-01-583-8769
Piston Rod Guide

015838769
MLR83467BG1: RNCC: 3 | RNVC: 2
MLR83467BG1: RNCC: 3 | RNVC: 9
MLR83467BG1: RNCC: 5 | RNVC: 9

9 Apr 2010

3040-01-544-2070
Shaft Collar

015442070
1088C128-1: RNCC: 3 | RNVC: 2

4 Oct 2006

3040-01-513-8069
Shouldered Shaft Assembly

015138069
PX-10717: RNCC: 3 | RNVC: 2

7 Oct 2003

3040-01-498-1860
Straight Shaft Assembly

014981860
195783-1: RNCC: 3 | RNVC: 2
195783: RNCC: D | RNVC: 9

18 Jun 2002

3040-01-510-6727
Ball Joint

015106727
74A661324-1001: RNCC: 3 | RNVC: 2

24 Jul 2003

3040-01-507-7890
Spur Gearshaft

015077890
1703421: RNCC: 3 | RNVC: 2

6 May 2003

3040-01-521-1192
Air Tool Kit Collar

015211192
SEP18437P1: RNCC: 3 | RNVC: 2

10 Jun 2004

3040-01-530-1963
Straight Shaft

015301963
B49671: RNCC: 3 | RNVC: 2

18 May 2005

3040-01-531-5544
Pneumatic Accumulator

015315544
7642252: RNCC: 3 | RNVC: 2

14 Jul 2005

3040-01-526-5125
Flexible Shaft Assembly

015265125
57353-50FT0IN: RNCC: 3 | RNVC: 2

21 Dec 2004

3040-01-524-2529
Shouldered Shaft

015242529
10936276-1: RNCC: 3 | RNVC: 2

27 Sep 2004

3040-01-562-0964
Mechanically Actuated Spindle

015620964
114852-000 POS150/151: RNCC: 3 | RNVC: 1
114854-000 POS150/151: RNCC: 3 | RNVC: 1
114852-000 POS150/151: RNCC: 3 | RNVC: 2
POS150/151: RNCC: 5 | RNVC: 9

28 Mar 2008

3040-01-517-9309
Rigid Connecting Link

015179309
7081-3: RNCC: 3 | RNVC: 2
SR11475A-2206: RNCC: 5 | RNVC: 9
LE162-0039-2206: RNCC: 7 | RNVC: 2

25 Feb 2004

3040-01-546-0241
Linear Actuating Cylinder Assembly

015460241
347-21005: RNCC: 3 | RNVC: 2
CV164532H: RNCC: 5 | RNVC: 2

4 Dec 2006

3040-01-515-7542
Linear Actuating Cylinder Piston

015157542
R433008141: RNCC: 3 | RNVC: 2
P194124-3880: RNCC: 5 | RNVC: 9
C194065 REF.13,17,18,19 (3880): RNCC: 5 | RNVC: 9

8 Dec 2003

3040-01-545-0543
Rigid Connecting Link

015450543
1434979: RNCC: 3 | RNVC: 2

31 Oct 2006

3040-01-477-0805
Remote Control Lever

014770805
254-7015355PN1: RNCC: 3 | RNVC: 2
H749-3901 PC 1: RNCC: 5 | RNVC: 2
7015355: RNCC: D | RNVC: 9

31 Jul 2000

3040-01-563-6876
Shouldered Shaft

015636876
810202: RNCC: 3 | RNVC: 2
993015 ITEM 28: RNCC: 5 | RNVC: 2

19 May 2008

3040-01-516-6469
Shouldered Shaft

015166469
3637AS683-6: RNCC: 3 | RNVC: 2
3637AS683: RNCC: D | RNVC: 9

14 Jan 2004

3040-01-513-8024
Shouldered Shaft Assembly

015138024
PX-10716: RNCC: 3 | RNVC: 2

7 Oct 2003

3040-01-555-9884
Worm Shaft

015559884
810210-10: RNCC: 3 | RNVC: 9
906010-5-1PL FIND NO 17: RNCC: 5 | RNVC: 9
906010-5-1PL FIND NO 17: RNCC: C | RNVC: 1
810210-10: RNCC: C | RNVC: 1

20 Sep 2007

3040-01-504-9978
Straight Shaft

015049978
112536003: RNCC: 3 | RNVC: 2
12556000 FN 4: RNCC: 5 | RNVC: 2
112546003: RNCC: 5 | RNVC: 9
112556000: RNCC: D | RNVC: 9

18 Feb 2003

3040-01-509-3533
Remote Control Lever

015093533
8M0132731: RNCC: 3 | RNVC: 2
17-826432A 2: RNCC: 5 | RNVC: 9
826432A 2: RNCC: 5 | RNVC: 9

19 Jun 2003

3040-01-516-6173
Control Cam

015166173
D35-007-1212: RNCC: 3 | RNVC: 2
D35-991-2402 REV E REF 61: RNCC: 5 | RNVC: 2

13 Jan 2004

3040-01-534-1798
Brake Disc

015341798
WXE1124 FIND NO.22: RNCC: 3 | RNVC: 2
1-082-612-00-003: RNCC: 5 | RNVC: 2

12 Oct 2005

3040-01-521-9244
Pressure Regulator Shaft And Spring Assembly

015219244
15936000-1: RNCC: 3 | RNVC: 2
15931200 FIND NO. 29: RNCC: 5 | RNVC: 2
15936000 P/N 15936000-1: RNCC: 5 | RNVC: 2
15931000 FIND NO. 27: RNCC: 5 | RNVC: 2
15931000 FIND NO. 27: RNCC: 5 | RNVC: 9
GS3316-1: RNCC: 5 | RNVC: 9
14-8-26.30-XME-XMBI-279LBS: RNCC: 5 | RNVC: 9
15936000-1: RNCC: 5 | RNVC: 9
15931200 FIND NO. 29: RNCC: 5 | RNVC: 9
15936000 P/N 15936000-1: RNCC: 5 | RNVC: 9

12 Jul 2004

3040-01-507-4465
Rigid Connecting Link

015074465
84216090: RNCC: 3 | RNVC: 2
LTA-A20-0093 ITEM 6: RNCC: 5 | RNVC: 2
LTA20206: RNCC: 5 | RNVC: 2
141472A1: RNCC: 5 | RNVC: 9
LTA-A20-0093: RNCC: 5 | RNVC: 9

29 Apr 2003

3040-01-506-3711
Clutch Torsion Bar

015063711
116757: RNCC: 3 | RNVC: 2

28 Mar 2003

3040-01-502-9368
Shouldered Shaft

015029368
607991-71-A: RNCC: 3 | RNVC: 2
801625-583 REV A PC. NO.40: RNCC: 5 | RNVC: 2
801625-582 REV A PC. NO.40: RNCC: 5 | RNVC: 2
801625-582: RNCC: D | RNVC: 9
801625-583: RNCC: D | RNVC: 9

26 Nov 2002

3040-01-467-8945
Linear Actuating Cylinder Assembly

014678945
AG201172B0: RNCC: 3 | RNVC: 2
2.00CBB2HLTVS14A10.00: RNCC: C | RNVC: 1

20 Sep 1999

3040-01-551-9355
Control Cable Assembly

015519355
D-WK-871 86 ASSY D: RNCC: 3 | RNVC: 2
F-WK-871-21 PC46: RNCC: 5 | RNVC: 1

31 May 2007

3040-01-522-4829
Linear Actuating Cylinder Piston Rod

015224829
P12618516: RNCC: 3 | RNVC: 2
P12618516: RNCC: 5 | RNVC: 9
P018583: RNCC: 5 | RNVC: 9

31 Jul 2004

3040-01-525-4787
Rigid Connecting Link

015254787
25183-2: RNCC: 3 | RNVC: 2

10 Nov 2004

3040-01-542-1286
Shaft Collar

015421286
M687828304: RNCC: 3 | RNVC: 2
470-6878283-4: RNCC: 5 | RNVC: 9
470-6878283-4: RNCC: 5 | RNVC: 9
470-6878283: RNCC: 5 | RNVC: 9

24 Jul 2006

3040-01-513-0822
Straight Shaft

015130822
P-10724: RNCC: 3 | RNVC: 2

17 Sep 2003

3040-01-509-2607
Accessory Dri Shaft

015092607
3041048: RNCC: 3 | RNVC: 2
3041048: RNCC: 5 | RNVC: 9

17 Jun 2003

3040-01-537-7509
Shaft Collar

015377509
12512233: RNCC: 3 | RNVC: 2
5015-03005: RNCC: 5 | RNVC: 9

23 Feb 2006

3040-01-546-9400
Brake Backing Plate

015469400
5-267-005-00: RNCC: 3 | RNVC: 2
8-126-711-01: RNCC: 5 | RNVC: 9

9 Jan 2007

3040-01-560-4016
Straight Shaft

015604016
16211803-1: RNCC: 3 | RNVC: 2
16211800 ITEM 14: RNCC: 5 | RNVC: 1
16211803-1: RNCC: C | RNVC: 1

29 Jan 2008

3040-01-561-6474
Stroke Assembly

015616474
12446524: RNCC: 3 | RNVC: 2

13 Mar 2008

3040-01-518-1969
Straight Shaft

015181969
513436: RNCC: 3 | RNVC: 2
9721332 ITEM H50: RNCC: 3 | RNVC: 9
513436: RNCC: 5 | RNVC: 9

4 Mar 2004

3040-01-544-9146
Straight Shaft

015449146
1088D122-1: RNCC: 3 | RNVC: 2

26 Oct 2006

3040-01-504-2516
Rigid Connecting Link

015042516
69-9605-7: RNCC: 3 | RNVC: 2
69-9605-7: RNCC: 5 | RNVC: 9

23 Jan 2003

3040-01-499-6692
Shaft Collar

014996692
064-48384-000: RNCC: 3 | RNVC: 2
364-48946-000 ITEM 45: RNCC: 5 | RNVC: 2
364-48946-000: RNCC: D | RNVC: 9

31 Jul 2002

3040-01-513-6929
Housing Adapter

015136929
5009625: RNCC: 3 | RNVC: 2
5007717: RNCC: 5 | RNVC: 9

3 Oct 2003

3040-01-562-7548
Mechanical Drive Housing Part

015627548
7-562115002-9: RNCC: 3 | RNVC: 2

21 Apr 2008

3040-01-563-6867
Pivot Shaft Assembly

015636867
301250: RNCC: 3 | RNVC: 2
993015 ITEM 17: RNCC: 5 | RNVC: 2

19 May 2008

3040-01-525-5197
Linear Actuating Cylinder Assembly

015255197
106555: RNCC: 3 | RNVC: 2

13 Nov 2004

3040-01-393-5902
Shouldered Shaft

013935902
XB5893L: RNCC: 3 | RNVC: 2

22 Jul 1994

3040-01-472-7150
Manual Control Lever

014727150
2C1-751: RNCC: 3 | RNVC: 2
2D3-621 PC 5: RNCC: 5 | RNVC: 2
2C1-00751: RNCC: 5 | RNVC: 2
2D3-621: RNCC: D | RNVC: 9

14 Mar 2000

3040-01-483-9803
Gearshaft

014839803
17505H18: RNCC: 3 | RNVC: 2
17505H18: RNCC: 5 | RNVC: 9

13 Apr 2001

3040-01-492-4118
Disk Brake Shoe

014924118
6510E21-018: RNCC: 3 | RNVC: 2
6510E21FN18: RNCC: 5 | RNVC: 2
6510E21: RNCC: D | RNVC: 9

27 Nov 2001

3040-01-493-6869
Brake Disc

014936869
388 7846-801: RNCC: 3 | RNVC: 2
388 7846-801: RNCC: 3 | RNVC: 9
388 7846-801: RNCC: 5 | RNVC: 2

15 Jan 2002

3040-01-472-1687
Shouldered Shaft

014721687
10053479: RNCC: 3 | RNVC: 2
10029082: RNCC: E | RNVC: 8

18 Feb 2000

3040-01-478-4138
Remote Control Lever

014784138
49009: RNCC: 3 | RNVC: 2
214742: RNCC: 5 | RNVC: 2

12 Sep 2000

3040-01-497-2758
Hub Clamp

014972758
7052621: RNCC: 3 | RNVC: 2

15 May 2002

3040-01-476-3834
Rigid Connecting Link

014763834
HN152-1103 PART NO. 57: RNCC: 3 | RNVC: 2

11 Jul 2000

3040-01-460-8330
Linear Actuating Cylinder Piston

014608330
3561-135: RNCC: 3 | RNVC: 2
3561-135: RNCC: 5 | RNVC: 9
3561-061: RNCC: E | RNVC: 8

18 Nov 1998

3040-01-447-0940
Remote Control Lever

014470940
200913895-01: RNCC: 3 | RNVC: 2
200913895-01: RNCC: 5 | RNVC: 2
581R017: RNCC: 5 | RNVC: 9

24 Jul 1997

3040-01-460-6008
Remote Control Lever

014606008
9383179-1: RNCC: 3 | RNVC: 2
9383179: RNCC: D | RNVC: 9

10 Nov 1998

3040-01-468-0460
Linear Actuating Cylinder Assembly

014680460
AG201179D0: RNCC: 3 | RNVC: 2

27 Sep 1999

3040-01-465-3862
Shouldered Shaft

014653862
628556: RNCC: 3 | RNVC: 2
628566: RNCC: 3 | RNVC: 9
1628551 ITEM NO. 6: RNCC: 5 | RNVC: 9
628566: RNCC: 5 | RNVC: 9
1628551 PT 6: RNCC: 5 | RNVC: 9
1801463 PT 6: RNCC: 5 | RNVC: 9
628556: RNCC: C | RNVC: 1
1628551: RNCC: D | RNVC: 9
1801463: RNCC: D | RNVC: 9

4 Jun 1999

3040-01-455-3643
Rigid Connecting Link

014553643
74A430951-1001: RNCC: 3 | RNVC: 2

30 Apr 1998

3040-01-435-3650
Counterbalance Weight

014353650
406-020-109-101: RNCC: 3 | RNVC: 2
406-020-109: RNCC: D | RNVC: 9

22 Aug 1996

3040-01-462-4659
Linear Actuating Cylinder Assembly

014624659
AG189987C0: RNCC: 3 | RNVC: 2
3.25CBB-2HLTVS13C X 48.375: RNCC: 5 | RNVC: 1
5038042: RNCC: 5 | RNVC: 9

4 Feb 1999

3040-01-497-2763
Hub Clamp

014972763
7052620: RNCC: 3 | RNVC: 2

15 May 2002

3040-01-436-7084
Counterbalance Weight

014367084
2196853CLD: RNCC: 3 | RNVC: 2

26 Sep 1996

3040-01-438-4358
Rotor Pitch Shaft

014384358
A02R2552F7: RNCC: 3 | RNVC: 2

7 Nov 1996

3040-01-445-7890
Nonrotating Shaft Eye Bracket

014457890
9-027-010025: RNCC: 3 | RNVC: 2
9-027-010025: RNCC: 5 | RNVC: 2
9-027-010025: RNCC: 5 | RNVC: 2

12 Jun 1997

3040-01-445-7894
Nonrotating Shaft Eye Bracket

014457894
9-027-010088: RNCC: 3 | RNVC: 2
9-027-010088: RNCC: 5 | RNVC: 2
9-027-010088: RNCC: 5 | RNVC: 2

12 Jun 1997

3040-01-474-8470
Shouldered Shaft

014748470
814169-1: RNCC: 3 | RNVC: 2
814169: RNCC: D | RNVC: 9

15 May 2000

3040-01-473-9037
Linear Actuating Cylinder Assembly

014739037
AG201179C0: RNCC: 3 | RNVC: 2

19 Apr 2000

3040-01-438-4770
Body Hub

014384770
6138847: RNCC: 3 | RNVC: 2
6138847: RNCC: D | RNVC: 9

8 Nov 1996

3040-01-455-7694
Linear Actuating Cylinder Assembly

014557694
GHC252010TF-28 ALL S/STEEL: RNCC: 3 | RNVC: 2

14 May 1998

3040-01-455-9891
Shouldered Shaft

014559891
1876-01: RNCC: 3 | RNVC: 2
P2667B-03: RNCC: 5 | RNVC: 9
NAP 929 ITEM 13: RNCC: 5 | RNVC: 9
P2667B-01: RNCC: C | RNVC: 1
P2667B-02: RNCC: C | RNVC: 1
NAP 929: RNCC: D | RNVC: 9

26 May 1998

3040-01-459-5599
Rigid Connecting Link

014595599
50211010-2: RNCC: 3 | RNVC: 2
50211010-2: RNCC: 5 | RNVC: 9

6 Oct 1998

3040-01-461-8042
Linear Actuating Cylinder Assembly

014618042
AG189988D0: RNCC: 3 | RNVC: 2
3038025: RNCC: 5 | RNVC: 9
4.00CC-2HLTVS23CX8.750: RNCC: 5 | RNVC: 9

5 Jan 1999

3040-01-478-1052
Shouldered Shaft

014781052
131412: RNCC: 3 | RNVC: 2

30 Aug 2000

3040-01-502-6956
Shouldered Shaft

015026956
10-232: RNCC: 3 | RNVC: 2
30-004C IT 7: RNCC: 5 | RNVC: 2

18 Nov 2002

3040-01-447-0006
Shouldered Shaft Assembly

014470006
125350-11: RNCC: 3 | RNVC: 2
10-61869-502: RNCC: 5 | RNVC: 2
10-61869: RNCC: D | RNVC: 9

23 Jul 1997

3040-01-470-5112
Linear Actuating Cylinder Piston

014705112
6-701-000225: RNCC: 3 | RNVC: 2

22 Dec 1999

3040-01-474-9332
Rotating Shaft Eye Bracket

014749332
11462289: RNCC: 3 | RNVC: 2

17 May 2000

3040-01-438-3386
Rigid Connecting Link

014383386
L3095864-001: RNCC: 3 | RNVC: 2
L3095864-001: RNCC: 5 | RNVC: 2
L3095864: RNCC: D | RNVC: 9

5 Nov 1996

3040-01-467-5859
Linear Actuating Cylinder Assembly

014675859
AG189985C0: RNCC: 3 | RNVC: 2
2.50CBB-2HLTVS14C X 6.000: RNCC: 5 | RNVC: 9

3 Sep 1999

3040-01-436-6580
Rigid Connecting Link

014366580
17P3A2437-503: RNCC: 3 | RNVC: 2
17P3A2437: RNCC: D | RNVC: 9

25 Sep 1996

3040-01-460-0984
Rigid Connecting Link

014600984
12466641: RNCC: 3 | RNVC: 2

27 Oct 1998

3040-01-481-6377
Airc Straight Shaft

014816377
10052632: RNCC: 3 | RNVC: 2

18 Jan 2001

3040-01-462-4592
Linear Actuating Cylinder Assembly

014624592
AG189989C0: RNCC: 3 | RNVC: 2
5038053: RNCC: 5 | RNVC: 9
5.00CBB-2HLTVS43C X 42.872: RNCC: 5 | RNVC: 9

4 Feb 1999

3040-01-493-1827
Rotating Shaft Eye Bracket

014931827
SS654-3WS: RNCC: 3 | RNVC: 2

19 Dec 2001

3040-01-473-8923
Linear Actuating Cylinder Assembly

014738923
AG201179B0: RNCC: 3 | RNVC: 2

19 Apr 2000

3040-01-469-0716
Nonaircraft Mechanical Actuator

014690716
LA50-40945: RNCC: 3 | RNVC: 2
LA50-409445: RNCC: C | RNVC: 1

2 Nov 1999

3040-01-449-0218
Spur Gearshaft

014490218
2D1-03978: RNCC: 3 | RNVC: 2
2D3-00293 IT NO 5: RNCC: 5 | RNVC: 2

17 Sep 1997

3040-01-477-3280
Rotating Shaft Eye Bracket

014773280
2140200116: RNCC: 3 | RNVC: 2

7 Aug 2000

3040-01-462-2536
Linear Actuating Cylinder Assembly

014622536
AG189982H0: RNCC: 3 | RNVC: 2
5038033: RNCC: 5 | RNVC: 9
1.50CJ/BB-2HLTVS43C X 10.00: RNCC: 5 | RNVC: 9

27 Jan 1999

3040-01-472-6760
Rigid Connecting Link

014726760
SR10784A-6007: RNCC: 3 | RNVC: 2
7514-6007: RNCC: 3 | RNVC: 2
7014-135: RNCC: 5 | RNVC: 9
LE162-0002-6007: RNCC: 7 | RNVC: 2

13 Mar 2000

3040-01-504-7815
Rigid Connecting Link

015047815
0-101-049-01: RNCC: 3 | RNVC: 2
V0-101-049-01: RNCC: 3 | RNVC: 2
0-001-110-01 FIND NO 72: RNCC: 5 | RNVC: 9
0-101-049-01: RNCC: 5 | RNVC: 9
0-001-110-01: RNCC: D | RNVC: 9

10 Feb 2003

3040-01-507-8618
Linear Actuating Cylinder Assembly

015078618
HC5347-3: RNCC: 3 | RNVC: 2
HC5347: RNCC: 5 | RNVC: 9

7 May 2003

3040-01-438-4771
Piston Ring

014384771
J109548: RNCC: 3 | RNVC: 2
109548: RNCC: 5 | RNVC: 9
H604BJ001 FIND NUMBER 50: RNCC: 5 | RNVC: 9
H604BJ001: RNCC: D | RNVC: 9

8 Nov 1996

3040-01-434-7837
Spur Gearshaft

014347837
C554AX060: RNCC: 3 | RNVC: 2
117754: RNCC: 5 | RNVC: 2
H554AX001 FIND NO. 59: RNCC: 5 | RNVC: 2
H544AX001: RNCC: D | RNVC: 9

7 Aug 1996

3040-01-447-0028
Shouldered Shaft Assembly

014470028
125350-12: RNCC: 3 | RNVC: 2
10-61869-503: RNCC: 5 | RNVC: 2
10-61869: RNCC: D | RNVC: 9

23 Jul 1997

3040-01-435-0143
Linear Actuating Cylinder Assembly Parts Kit

014350143
RB-A-G: RNCC: 3 | RNVC: 2

12 Aug 1996

3040-01-472-8839
Linear Actuating Cylinder Assembly

014728839
AG201170A0: RNCC: 3 | RNVC: 2

21 Mar 2000

3040-01-489-1436
Airc Spline Adapter

014891436
101999-4-1: RNCC: 3 | RNVC: 2

13 Sep 2001

3040-01-385-1145
Remote Control Lever

013851145
3341154-3: RNCC: 3 | RNVC: 2
3341154: RNCC: D | RNVC: 9

4 Jan 1994

3040-01-363-8785
Dual Slave Winch Unit

013638785
KR520: RNCC: 3 | RNVC: 2
KR760215: RNCC: C | RNVC: 1

8 Sep 1992

3040-01-441-2902
Straight Shaft

014412902
4889193-002: RNCC: 3 | RNVC: 2
4889193-002: RNCC: 3 | RNVC: 9
4889193-002: RNCC: 5 | RNVC: 2
4889193: RNCC: D | RNVC: 9

7 Feb 1997

3040-01-451-3432
Control Cam

014513432
20202FN15: RNCC: 3 | RNVC: 1
B07207.001.575: RNCC: 5 | RNVC: 1
07207001575: RNCC: 5 | RNVC: 2
B07207.001.575: RNCC: 5 | RNVC: 9

12 Dec 1997

3040-01-461-9717
Linear Actuating Cylinder Assembly

014619717
AG189987D0: RNCC: 3 | RNVC: 2
5038043: RNCC: 5 | RNVC: 9
3.25CBB-2HLTVS13C X 48.375: RNCC: 5 | RNVC: 9

13 Jan 1999

3040-01-375-1516
Shouldered Shaft

013751516
792871-2: RNCC: 3 | RNVC: 2
792871-1: RNCC: 5 | RNVC: 9

6 May 1993

3040-01-414-4304
Hub Clamp

014144304
23050879-9: RNCC: 3 | RNVC: 2

7 Jun 1995

3040-01-370-1394
Linear Actuating Cylinder Piston Rod

013701394
6-768-002492: RNCC: 3 | RNVC: 2
6-768-002492: RNCC: 5 | RNVC: 2
6-768-002492: RNCC: 5 | RNVC: 2

14 Jan 1993

3040-01-430-2388
Pivot Shaft Assembly

014302388
AGE129-1: RNCC: 3 | RNVC: 9
AGE129-1: RNCC: 5 | RNVC: 2

25 Apr 1996

3040-01-368-8298
Bell Crank

013688298
17P2A3053-2: RNCC: 3 | RNVC: 2

9 Dec 1992

3040-01-412-2692
Shouldered Shaft

014122692
D204811G001-57: RNCC: 3 | RNVC: 2
802-5773417 ITEM 57: RNCC: 5 | RNVC: 2
D204811G001 ITEM 57: RNCC: 5 | RNVC: 2
802-5773417: RNCC: D | RNVC: 9

14 Apr 1995

3040-01-370-0228
Linear Actuating Cylinder

013700228
6-372-003495: RNCC: 3 | RNVC: 2
6-372-003495: RNCC: 5 | RNVC: 2
6-372-003495: RNCC: 5 | RNVC: 2
6-372-003495: RNCC: 5 | RNVC: 9

11 Jan 1993

3040-01-439-7505
Cylinder Port Block

014397505
416418: RNCC: 3 | RNVC: 2
416418: RNCC: 5 | RNVC: 9

18 Dec 1996

3040-01-370-1391
Linear Actuating Cylinder Piston

013701391
6-768-002482: RNCC: 3 | RNVC: 2
6-766-002482: RNCC: 5 | RNVC: 2
6-766-002482: RNCC: 5 | RNVC: 2

14 Jan 1993

3040-01-435-5315
Linear Actuating Cylinder Assembly

014355315
3161496: RNCC: 3 | RNVC: 2
6V7047: RNCC: 5 | RNVC: 9

27 Aug 1996

3040-01-384-0863
Rigid Connecting Link

013840863
17P2D4300-503: RNCC: 3 | RNVC: 2

8 Dec 1993

3040-01-406-1997
Nonrotating Shaft Eye Bracket

014061997
17152: RNCC: 3 | RNVC: 2
SKC-1198 ITEM X126: RNCC: 5 | RNVC: 2
X126: RNCC: 5 | RNVC: 2
SKC-1198: RNCC: D | RNVC: 9

23 Dec 1994

3040-01-423-8087
Remote Control Lever

014238087
5518821: RNCC: 3 | RNVC: 2
3040PL0917286: RNCC: 6 | RNVC: 9

11 Jan 1996

3040-01-412-1152
Straight Shaft

014121152
C205365D015: RNCC: 3 | RNVC: 2
H205365D001 ITEM #14: RNCC: 5 | RNVC: 2
H205365D001: RNCC: D | RNVC: 9

11 Apr 1995

3040-01-440-4676
Multiple Disk Brake

014404676
75633: RNCC: 3 | RNVC: 2
36715H: RNCC: 5 | RNVC: 9

14 Jan 1997

3040-01-452-0113
Shaft Collar

014520113
C-C-2557: RNCC: 3 | RNVC: 2
WH300000 ITEM 074: RNCC: 5 | RNVC: 2
WH300000: RNCC: D | RNVC: 9

13 Jan 1998

3040-01-388-5483
Rigid Connecting Link

013885483
406-070-102-101: RNCC: 3 | RNVC: 2

1 Apr 1994

3040-01-443-8111
Rigid Connecting Link

014438111
9-027-010085: RNCC: 3 | RNVC: 2
9-027-010085: RNCC: 5 | RNVC: 2
9-027-010085: RNCC: 5 | RNVC: 2

18 Apr 1997

3040-01-407-7570
Control Cable Assembly

014077570
526172: RNCC: 3 | RNVC: 2

4 Feb 1995

3040-01-423-4433
Linear Actuating Cylinder Assembly

014234433
MQ3222-034: RNCC: 3 | RNVC: 9
6961212: RNCC: 5 | RNVC: 2
MQ3222-034: RNCC: C | RNVC: 1

27 Dec 1995

3040-01-370-2550
Linear Actuating Cylinder Cap

013702550
12938326: RNCC: 3 | RNVC: 2

16 Jan 1993

3040-01-389-0298
Rigid Connecting Link

013890298
406-070-102-103: RNCC: 3 | RNVC: 2

14 Apr 1994

3040-01-421-4644
Shouldered Shaft

014214644
7-0101-01: RNCC: 3 | RNVC: 2
PL.8VHSS-1 ITEM 7: RNCC: 5 | RNVC: 2
PL5VHSS-1 ITEM: RNCC: C | RNVC: 1

8 Nov 1995

3040-01-379-4644
Linear Actuating Cylinder Assembly

013794644
B-WK-774-25: RNCC: 3 | RNVC: 2
11468751-003: RNCC: 5 | RNVC: 9
B-WK-774-25: RNCC: 5 | RNVC: 9

31 Aug 1993

3040-01-388-4670
Linear Actuating Cylinder Assembly

013884670
S10003408DLBZ: RNCC: 3 | RNVC: 2
S10003408DLBZ: RNCC: 5 | RNVC: 2
S10003408LDBZ: RNCC: 5 | RNVC: 9
9207-074: RNCC: 5 | RNVC: 9
S10003408LDBZ: RNCC: 5 | RNVC: 9
SW33935: RNCC: 5 | RNVC: 9

31 Mar 1994

3040-01-462-1302
Linear Actuating Cylinder Assembly

014621302
AG189984E: RNCC: 3 | RNVC: 2
2.00CBB-2HLTVS14C X 7.250: RNCC: 5 | RNVC: 2
5038051: RNCC: 5 | RNVC: 9
AG189984E0: RNCC: 5 | RNVC: 9

21 Jan 1999

3040-01-385-3814
Push-Pull Control Assembly

013853814
912C0101-10: RNCC: 3 | RNVC: 2

11 Jan 1994

3040-01-407-1859
Spindle Guide

014071859
17243: RNCC: 3 | RNVC: 2
SKB-456 ITEM X208: RNCC: 5 | RNVC: 2
X208: RNCC: 5 | RNVC: 2

23 Jan 1995

3040-01-408-0412
Bell Crank

014080412
70400-01206-042: RNCC: 3 | RNVC: 2

9 Feb 1995

3040-01-409-1217
Cylinder Support

014091217
12940951: RNCC: 3 | RNVC: 2
3040014091217: RNCC: 6 | RNVC: 9

6 Mar 1995

3040-01-419-6368
Flexible Drive Shaft

014196368
7575404-002: RNCC: 3 | RNVC: 2
757404-2: RNCC: 5 | RNVC: 2
7575404-2: RNCC: 5 | RNVC: 9
7575404: RNCC: D | RNVC: 9

27 Sep 1995

3040-01-389-8988
Linear Actuating Cylinder Assembly

013898988
830811: RNCC: 3 | RNVC: 2
830811-1: RNCC: 5 | RNVC: 9
3040PL0839105: RNCC: 6 | RNVC: 9

6 May 1994

3040-01-385-3197
Shouldered Axle

013853197
9235339-01: RNCC: 3 | RNVC: 2
9235339-01: RNCC: 5 | RNVC: 9

8 Jan 1994

3040-01-370-1348
Straight Shaft

013701348
6-810-002185: RNCC: 3 | RNVC: 2
6-810-002185: RNCC: 5 | RNVC: 2
6-810-002185: RNCC: 5 | RNVC: 2

14 Jan 1993

3040-01-412-7578
Multiple Gears Gearshaft

014127578
7-317236800-7: RNCC: 3 | RNVC: 2
7-317236800-7: RNCC: 5 | RNVC: 9
7-317236800 FIND 11: RNCC: 5 | RNVC: 9

27 Apr 1995

3040-01-439-7868
Shaft Collar

014397868
8100-1256-0303-PC32: RNCC: 3 | RNVC: 2
8100-1256-0303: RNCC: D | RNVC: 9

19 Dec 1996

3040-01-385-5665
Straight Shaft

013855665
912C0307: RNCC: 3 | RNVC: 2

14 Jan 1994

3040-01-366-2146
Linear Actuating Cylinder Assembly

013662146
H84T2B-250-425-100-S22-9: RNCC: 3 | RNVC: 9
89156911: RNCC: 5 | RNVC: 9
CYSR5000HY94T2B-250-425-100-990: RNCC: 5 | RNVC: 9

22 Oct 1992

3040-01-408-5736
Brake Backing Plate

014085736
8-002-23201-30G: RNCC: 3 | RNVC: 2
8-002-23201-30: RNCC: 5 | RNVC: 9
8-002-232-1: RNCC: 5 | RNVC: 9
NI-082-602-A ITEM NO. 2: RNCC: 5 | RNVC: 9
8-002-232-01: RNCC: C | RNVC: 1

21 Feb 1995

3040-01-421-8125
Straight Shaft

014218125
965B412-1: RNCC: 3 | RNVC: 2
965B412-1: RNCC: 5 | RNVC: 2
662E715 PIECE 13: RNCC: 5 | RNVC: 2
965B412PC1: RNCC: 5 | RNVC: 9

15 Nov 1995

3040-01-394-9706
Manual Control Lever

013949706
78736: RNCC: 3 | RNVC: 2
78730 ITEM 11: RNCC: 5 | RNVC: 2
78730: RNCC: D | RNVC: 9

18 Aug 1994

3040-01-400-6061
Straight Shaft

014006061
126-000-032: RNCC: 3 | RNVC: 2

16 Dec 1994

3040-01-413-8887
Shouldered Shaft

014138887
1070135301: RNCC: 3 | RNVC: 2
1070135301: RNCC: 5 | RNVC: 2
M05-50135-P01: RNCC: 5 | RNVC: 9
M00-50186-G1 ITEM 8,MA,TY3,4: RNCC: 5 | RNVC: 9
M00-50186-G1 ITEM 8: RNCC: 5 | RNVC: 9
M00-50186-G1 PC8 MY SZ8 TYIII/IV: RNCC: 5 | RNVC: 9
M00-50186-G1: RNCC: D | RNVC: 9

24 May 1995

3040-01-452-4368
Rotating Shaft Eye Bracket

014524368
752-6406825-28: RNCC: 3 | RNVC: 2
DF1706-436 FIND NO 28: RNCC: 5 | RNVC: 9
6406825: RNCC: D | RNVC: 9

27 Jan 1998

3040-01-355-9161
Nonrotating Shaft Eye Bracket

013559161
12934585: RNCC: 3 | RNVC: 2
12934585: RNCC: 5 | RNVC: 2
12934585: RNCC: 5 | RNVC: 2

26 Mar 1992

3040-01-358-6303
Rigid Connecting Link

013586303
17P3A1674-1: RNCC: 3 | RNVC: 2

16 May 1992

3040-01-407-3627
Mechanical Drive Housing

014073627
SKB-714 ITEM X12: RNCC: 3 | RNVC: 2
18284-1: RNCC: 3 | RNVC: 2
X12: RNCC: 5 | RNVC: 2
SKB-714: RNCC: D | RNVC: 9

26 Jan 1995

3040-01-377-4003
Shouldered Shaft

013774003
5830644: RNCC: 3 | RNVC: 2

15 Jul 1993

3040-01-343-2941
Housing Adapter

013432941
6SE01170-1: RNCC: 3 | RNVC: 2
ADU-567/E: RNCC: 5 | RNVC: 1

9 Aug 1991

3040-01-370-0366
Shaft Collar

013700366
C502Z003: RNCC: 3 | RNVC: 2

11 Jan 1993

3040-01-426-4985
Shouldered Shaft

014264985
593-6960883 PC 1: RNCC: 3 | RNVC: 2
6960883: RNCC: D | RNVC: 9

13 Mar 1996

3040-01-386-1840
Bevel-Spur Gearshaft

013861840
912F0703: RNCC: 3 | RNVC: 2

28 Jan 1994

3040-01-415-2626
Straight Shaft

014152626
J143082: RNCC: 3 | RNVC: 2
H205369D001 ITEM 17: RNCC: 5 | RNVC: 2
B200660D018: RNCC: 5 | RNVC: 2
H205369D001: RNCC: D | RNVC: 9

23 Jun 1995

3040-01-415-7400
Linear Actuating Cylinder Assembly

014157400
GG251950-C: RNCC: 3 | RNVC: 2
1.50CBB-2HLTVS24ACX6.000: RNCC: 5 | RNVC: 9
GGG251950-C: RNCC: D | RNVC: 9

5 Jul 1995

3040-01-370-1396
Linear Actuating Cylinder Piston Rod

013701396
6-768-003159: RNCC: 3 | RNVC: 2
6-768-003159: RNCC: 5 | RNVC: 2
6-768-003159: RNCC: 5 | RNVC: 2

14 Jan 1993

3040-01-452-8132
Shaft Collar

014528132
803-1624134 PC35: RNCC: 3 | RNVC: 2
1624134: RNCC: D | RNVC: 9

9 Feb 1998

3040-01-377-6865
Control Cam

013776865
07207001108: RNCC: 3 | RNVC: 2
B07207.001.108: RNCC: 5 | RNVC: 9
SW124 FIND 11: RNCC: 5 | RNVC: 9
B07207.001.108: RNCC: 5 | RNVC: 9
SW124 FIND 11: RNCC: 5 | RNVC: 9
C05798.003.108: RNCC: C | RNVC: 1

23 Jul 1993

3040-01-307-6541
Bell Crank

013076541
3825095: RNCC: 3 | RNVC: 2
3825095: RNCC: 5 | RNVC: 2
3825095: RNCC: 5 | RNVC: 2

14 Sep 1989

3040-01-300-2164
Ball Joint Socket

013002164
2489142: RNCC: 3 | RNVC: 2
P303C: RNCC: 5 | RNVC: 9

11 May 1989

3040-01-315-8182
Straight Shaft

013158182
83645: RNCC: 3 | RNVC: 2
16760AM ITEM 11: RNCC: 5 | RNVC: 9
83687 ITEM 11: RNCC: C | RNVC: 1

23 Feb 1990

3040-01-286-9466
Rigid Connecting Link

012869466
55A40H14-3: RNCC: 3 | RNVC: 2
55A40H14: RNCC: D | RNVC: 9

12 Oct 1988

3040-01-319-9000
Rigid Connecting Link

013199000
9380469: RNCC: 3 | RNVC: 2

16 May 1990

3040-01-342-8791
Multiple Disk Brake

013428791
90-1600-00400: RNCC: 3 | RNVC: 2
PD1428-2-2: RNCC: 5 | RNVC: 9
90-1600-0400: RNCC: 5 | RNVC: 9

31 Jul 1991

3040-01-366-7562
Mechanically Actuated Spindle

013667562
8445-51: RNCC: 3 | RNVC: 2

2 Nov 1992

3040-01-311-5590
Shouldered Shaft

013115590
2527205-1: RNCC: 3 | RNVC: 2
2527205: RNCC: D | RNVC: 9

1 Dec 1989

3040-01-325-8193
Shouldered Shaft

013258193
416562: RNCC: 3 | RNVC: 2

11 Sep 1990

3040-01-350-9069
Shouldered Shaft

013509069
123-4645270 ITEM 5: RNCC: 3 | RNVC: 2
36-37-7824: RNCC: 5 | RNVC: 2
4645270 ITEM 5: RNCC: 5 | RNVC: 2
4645270: RNCC: D | RNVC: 9

25 Dec 1991

3040-01-353-0640
Linear Actuating Cylinder Piston Rod

013530640
6-768-002467: RNCC: 3 | RNVC: 2
2HG7: RNCC: 5 | RNVC: 2
2HG7: RNCC: 5 | RNVC: 9

5 Feb 1992

3040-01-339-3580
Linear Actuating Cylinder Assembly

013393580
1H2H0A00075124: RNCC: 3 | RNVC: 2
4.0CBB2HTS14AC52.0: RNCC: 5 | RNVC: 9
1H000075124: RNCC: 5 | RNVC: 9
CG160622AA: RNCC: 5 | RNVC: 9
GG160622AA: RNCC: 5 | RNVC: 9

21 May 1991

3040-01-334-6935
Counterbalance Weight

013346935
214-015-021-007: RNCC: 3 | RNVC: 2

26 Feb 1991

3040-01-340-9818
Shouldered Axle

013409818
513449: RNCC: 3 | RNVC: 2
513449: RNCC: 3 | RNVC: 2
513449: RNCC: 5 | RNVC: 2
TM75114CA5-PG16 PC 62: RNCC: 5 | RNVC: 9

23 Jun 1991

3040-01-312-9254
Linear Actuating Cylinder Piston Rod

013129254
8205570: RNCC: 3 | RNVC: 2
DH2-289: RNCC: 5 | RNVC: 2
8205570: RNCC: 5 | RNVC: 9

26 Dec 1989

3040-01-314-2075
Push-Pull Control Assembly

013142075
C81320-3: RNCC: 3 | RNVC: 2

24 Jan 1990

3040-01-334-6933
Counterbalance Weight

013346933
214-015-021-009: RNCC: 3 | RNVC: 2

26 Feb 1991

3040-01-345-5956
Rigid Connecting Link

013455956
A7-D1346-1: RNCC: 3 | RNVC: 2
B5319PC69: RNCC: 5 | RNVC: 2
B5319: RNCC: D | RNVC: 9

21 Sep 1991

3040-01-346-9834
Shouldered Shaft

013469834
50C-0033-0144-3: RNCC: 3 | RNVC: 2
50C-0033-0144-3: RNCC: 5 | RNVC: 2
50C-0033-0144: RNCC: D | RNVC: 9

12 Oct 1991

3040-01-338-5893
Shouldered Shaft

013385893
58648: RNCC: 3 | RNVC: 2

7 May 1991

3040-01-305-9954
Linear Actuating Cylinder Assembly

013059954
T-85127-0: RNCC: 3 | RNVC: 2

15 Aug 1989

3040-01-332-2449
Control Cam

013322449
C-9973-1: RNCC: 3 | RNVC: 2
C-9973-1: RNCC: 5 | RNVC: 9

8 Jan 1991

3040-01-343-0781
Bell Crank

013430781
A240285 FIND 4: RNCC: 3 | RNVC: 2
A230286: RNCC: 5 | RNVC: 2
A240285: RNCC: D | RNVC: 9

4 Aug 1991

3040-01-346-0871
Linear Actuating Cylinder Assembly

013460871
SC-192-4: RNCC: 3 | RNVC: 2
SC-192-4: RNCC: 3 | RNVC: 9
SC-192-4: RNCC: 5 | RNVC: 2

26 Sep 1991

3040-01-353-8566
Shaft Retaining Plate

013538566
6-705-012857: RNCC: 3 | RNVC: 2
2HG11: RNCC: 5 | RNVC: 2
2HG11: RNCC: 5 | RNVC: 9

19 Feb 1992

3040-01-299-9891
Linear Actuating Cylinder Assembly

012999891
GG 123543C0: RNCC: 3 | RNVC: 2
GG12343C0: RNCC: 5 | RNVC: 9
1.5-CBB-2ALTS 14C X 8.125: RNCC: 5 | RNVC: 9

9 May 1989

3040-01-314-2135
Straight Shaft

013142135
2056-42 PC5: RNCC: 3 | RNVC: 2
2056-42 PC5: RNCC: 5 | RNVC: 9

25 Jan 1990

3040-01-299-8471
Shouldered Shaft

012998471
Q-15445J021A: RNCC: 3 | RNVC: 2
LM627 PC 29: RNCC: 5 | RNVC: 9

7 May 1989

3040-01-312-9188
Linear Actuating Cylinder

013129188
064-28883-000: RNCC: 3 | RNVC: 2
064-28883B: RNCC: 5 | RNVC: 9

26 Dec 1989

3040-01-325-2145
Control Cam

013252145
3035-382: RNCC: 3 | RNVC: 2

30 Aug 1990

3040-01-334-6934
Counterbalance Weight

013346934
214-015-021-005: RNCC: 3 | RNVC: 2

26 Feb 1991

3040-01-322-1008
Linear Actuating Cylinder Assembly

013221008
519-3618: RNCC: 3 | RNVC: 2
MRS-1712-DXPZ: RNCC: 5 | RNVC: 9
D-8433-A: RNCC: 5 | RNVC: 9

28 Jun 1990

3040-01-346-6314
Shouldered Shaft

013466314
5B1-04224: RNCC: 3 | RNVC: 2

9 Oct 1991

3040-01-346-1979
Rigid Connecting Link

013461979
T101270-109: RNCC: 3 | RNVC: 2
T101270: RNCC: D | RNVC: 9

28 Sep 1991

3040-01-355-9171
Shaft Retaining Plate

013559171
887690: RNCC: 3 | RNVC: 2

26 Mar 1992

3040-01-305-9968
Remote Control Lever

013059968
12358381-2: RNCC: 3 | RNVC: 2
12358381: RNCC: D | RNVC: 9

15 Aug 1989

3040-01-307-6341
Shouldered Shaft

013076341
2492756 PIECE 206: RNCC: 3 | RNVC: 2
DE1052-2042-8-206: RNCC: 5 | RNVC: 9
2492756 PIECE 206: RNCC: 5 | RNVC: 9

14 Sep 1989

3040-01-294-7188
Shouldered Shaft

012947188
1142632: RNCC: 3 | RNVC: 2
1142632: RNCC: 3 | RNVC: 9
314064 LINE 9: RNCC: 5 | RNVC: 9

22 Feb 1989

3040-01-311-5630
Nonaircraft Mechanical Actuator

013115630
31W-0012: RNCC: 1 | RNVC: 2
AN164110C0: RNCC: 3 | RNVC: 2
2.50K-2HKTS33-7.60: RNCC: 5 | RNVC: 9
2.5KT-2HKTS33/33X7.600: RNCC: 5 | RNVC: 9

1 Dec 1989

3040-01-317-5426
Remote Control Lever

013175426
4413-060: RNCC: 3 | RNVC: 2
X83470-149: RNCC: 5 | RNVC: 2

31 Mar 1990

3040-01-338-2302
Pneumatic Actuator Cylinder Housing

013382302
895-29475 ITEM 65: RNCC: 3 | RNVC: 2
31342: RNCC: 5 | RNVC: 2
895-29475 REV G ITEM 65: RNCC: 5 | RNVC: 9
895-29475: RNCC: D | RNVC: 9

28 Apr 1991

3040-01-322-2530
Mechanical Drive Housing

013222530
NYLC1447: RNCC: 3 | RNVC: 2

30 Jun 1990

3040-01-352-0044
Linear Actuating Cylinder Head

013520044
6-372-003389: RNCC: 3 | RNVC: 2
2HG388: RNCC: 5 | RNVC: 2
2HG388: RNCC: 5 | RNVC: 9

17 Jan 1992

3040-01-365-3811
Differential Gear Unit

013653811
23031590: RNCC: 3 | RNVC: 2

6 Oct 1992

3040-01-340-5912
Shouldered Shaft

013405912
70700-20130-134: RNCC: 3 | RNVC: 2

17 Jun 1991

3040-01-375-7864
Rotating Shaft Eye Bracket

013757864
3233940: RNCC: 3 | RNVC: 2

20 May 1993

3040-01-338-7546
Manual Control Lever

013387546
5210091: RNCC: 3 | RNVC: 2
5210069 ITEM 19: RNCC: 5 | RNVC: 2

10 May 1991

3040-01-300-5255
Straight Shaft

013005255
820201: RNCC: 3 | RNVC: 9
C901010 PIECE 23: RNCC: 5 | RNVC: 9

15 May 1989

3040-01-311-5090
Mechanical Drive Housing

013115090
10029126: RNCC: 3 | RNVC: 2

29 Nov 1989

3040-01-368-0088
Linear Actuating Cylinder Assembly

013680088
AT25020: RNCC: 3 | RNVC: 2
SW25020: RNCC: 5 | RNVC: 9
8802-061: RNCC: 5 | RNVC: 9

23 Nov 1992

3040-01-284-7367
Shouldered Shaft

012847367
75A22036-007: RNCC: 3 | RNVC: 2

30 Aug 1988

3040-01-306-6927
Shouldered Shaft

013066927
10029037-2: RNCC: 3 | RNVC: 2

29 Aug 1989

3040-01-301-3024
Linear Actuating Cylinder Assembly

013013024
TE01CACD3AA01000: RNCC: 3 | RNVC: 2

26 May 1989

3040-01-327-7123
Straight Shaft

013277123
68A351014-2001: RNCC: 3 | RNVC: 2

21 Oct 1990

3040-01-319-3304
Remote Control Lever

013193304
5544152: RNCC: 3 | RNVC: 2
5544152: RNCC: 5 | RNVC: 2

5 May 1990

3040-01-355-0625
Body Hub

013550625
4-195-9-00129: RNCC: 3 | RNVC: 2
2HG31: RNCC: 5 | RNVC: 2
2HG31: RNCC: 5 | RNVC: 9

11 Mar 1992

3040-01-342-4746
Counterbalance Weight

013424746
4070419CL2: RNCC: 3 | RNVC: 2

24 Jul 1991

3040-01-289-2369
Shouldered Shaft

012892369
505-4457352 ITEM 10: RNCC: 3 | RNVC: 2
7501-25 ITEM 10: RNCC: 5 | RNVC: 9
505-4457352: RNCC: D | RNVC: 9

18 Nov 1988

3040-01-368-6565
Linear Actuating Cylinder Assembly

013686565
CYSR2480HY74K2B-150-8200-63-990: RNCC: 3 | RNVC: 9
89156918: RNCC: 5 | RNVC: 9

5 Dec 1992

3040-01-310-6797
Brake Shoe

013106797
94HD-31A-410G: RNCC: 3 | RNVC: 2
94HD-31A-410G: RNCC: 5 | RNVC: 2

12 Nov 1989

3040-01-302-3027
Linear Actuating Cylinder Piston Rod

013023027
TE82C5DA30A0594: RNCC: 3 | RNVC: 2
TE25CACD3AA01000 ITEM 8: RNCC: 5 | RNVC: 9
TE82DCA30A010: RNCC: 5 | RNVC: 9

13 Jun 1989

3040-01-328-5610
Linear Actuating Cylinder Assembly

013285610
CA2010-7309: RNCC: 3 | RNVC: 9
008523V001: RNCC: 5 | RNVC: 2
CA20107309: RNCC: 5 | RNVC: 2

4 Nov 1990

3040-01-339-5249
Rigid Connecting Link

013395249
70250-85806-102: RNCC: 3 | RNVC: 2
70250-85806: RNCC: D | RNVC: 9

23 May 1991

3040-01-313-1181
Brake Backing Plate

013131181
51956202: RNCC: 3 | RNVC: 2

31 Dec 1989

3040-01-263-8867
Bell Crank

012638867
413-10655-502: RNCC: 3 | RNVC: 2
413-10655-502: RNCC: 5 | RNVC: 2
413-10655-502: RNCC: 5 | RNVC: 9

21 Sep 1987

3040-01-261-0138
Straight Shaft

012610138
1031599: RNCC: 3 | RNVC: 2
1031599: RNCC: 5 | RNVC: 2
1031599: RNCC: 5 | RNVC: 9

7 Aug 1987

3040-01-275-9142
Shouldered Shaft

012759142
7-0010-01: RNCC: 3 | RNVC: 2
NA1037-000: RNCC: 3 | RNVC: 9
NA1037: RNCC: C | RNVC: 1

29 Mar 1988

3040-01-272-8873
Linear Actuating Cylinder

012728873
10524178: RNCC: 3 | RNVC: 2
319-3659: RNCC: 5 | RNVC: 2

17 Feb 1988

3040-01-286-8866
Bell Crank

012868866
234E5508-1: RNCC: 3 | RNVC: 2

9 Oct 1988

3040-01-303-1152
Straight Shaft

013031152
53284: RNCC: 3 | RNVC: 9
LE613/69: RNCC: 5 | RNVC: 9
53284: RNCC: 5 | RNVC: 9
053284: RNCC: 5 | RNVC: 9

24 Jun 1989

3040-01-290-4965
Shouldered Shaft

012904965
B-7265: RNCC: 3 | RNVC: 2
52438A ITEM 26: RNCC: 5 | RNVC: 2

12 Dec 1988

3040-01-287-0498
Push-Pull Control Assembly

012870498
B2260-14: RNCC: 3 | RNVC: 2
C-4482: RNCC: D | RNVC: 9

13 Oct 1988

3040-01-274-9505
Detent Plate

012749505
29-4807-4: RNCC: 3 | RNVC: 2
29-4807-4: RNCC: 5 | RNVC: 9
29-4807: RNCC: D | RNVC: 9

16 Mar 1988

3040-01-263-2288
Shouldered Shaft

012632288
017B0779-K081A: RNCC: 3 | RNVC: 2
017B0779: RNCC: 5 | RNVC: 9

11 Sep 1987

3040-01-281-4427
Linear Actuating Cylinder Assembly Parts Kit

012814427
130982-W.P.: RNCC: 3 | RNVC: 2

23 Jun 1988

3040-01-267-3244
Spline Adapter

012673244
518948-1: RNCC: 3 | RNVC: 2

9 Nov 1987

3040-01-300-3394
Ball Joint Ball

013003394
2489194: RNCC: 3 | RNVC: 2

12 May 1989

3040-01-268-9544
Shaft Collar

012689544
3-214-2-08-210-01: RNCC: 3 | RNVC: 1
3-214-2-08-210-01VM: RNCC: 5 | RNVC: 2
3-214-2-08-210-01: RNCC: 5 | RNVC: 9

10 Dec 1987

3040-01-267-2451
Flexible Control Casing

012672451
3755301-1: RNCC: 3 | RNVC: 2
LE162-0041-0019: RNCC: 7 | RNVC: 2

7 Nov 1987

3040-01-254-3187
Spur Gearshaft

012543187
142D6878: RNCC: 3 | RNVC: 2

5 May 1987

3040-01-289-9398
Shouldered Shaft

012899398
35-79501-3028-4: RNCC: 3 | RNVC: 2
31-58609-4005-5 ITEM 1: RNCC: 5 | RNVC: 9

3 Dec 1988

3040-01-297-5985
Shouldered Shaft

012975985
064-24520-000: RNCC: 3 | RNVC: 2
664-24520D: RNCC: 5 | RNVC: 9
664-24520-000: RNCC: 5 | RNVC: 9
064-24520D: RNCC: C | RNVC: 1

4 Apr 1989

3040-01-275-1763
Nonrotating Shaft Eye Bracket

012751763
9510745: RNCC: 3 | RNVC: 9
9270539: RNCC: 5 | RNVC: 9

18 Mar 1988

3040-01-242-8414
Straight Shaft

012428414
12349616-15: RNCC: 3 | RNVC: 2

17 Oct 1986

3040-01-290-4959
Hub Clamp

012904959
1132: RNCC: 3 | RNVC: 2
MA20722372: RNCC: 5 | RNVC: 2

12 Dec 1988

3040-01-280-5034
Push-Pull Control Assembly

012805034
884167C1: RNCC: 3 | RNVC: 9
884167C1: RNCC: 5 | RNVC: 2

11 Jun 1988

3040-01-298-8632
Straight Shaft

012988632
05-3138-28: RNCC: 3 | RNVC: 2
05-3138-28: RNCC: 3 | RNVC: 9

22 Apr 1989

3040-01-260-8207
Rigid Connecting Link

012608207
357069-7: RNCC: 3 | RNVC: 2

5 Aug 1987

3040-01-270-9663
Shouldered Shaft

012709663
60-306-0038-2: RNCC: 3 | RNVC: 2

15 Jan 1988

3040-01-289-2435
Push-Pull Control Assembly

012892435
310784-000-0054: RNCC: 3 | RNVC: 2
310784-000-0054: RNCC: 3 | RNVC: 9
D300149-000-0054: RNCC: 5 | RNVC: 9

18 Nov 1988

3040-01-266-9584
Shouldered Shaft

012669584
5381257 PIECE 33: RNCC: 3 | RNVC: 2
5381257 PIECE 33: RNCC: 5 | RNVC: 2
5381257-33: RNCC: C | RNVC: 1
5381269: RNCC: C | RNVC: 1
5381257: RNCC: D | RNVC: 9

3 Nov 1987

3040-01-269-2343
Brake Shoe

012692343
2B2-2416: RNCC: 3 | RNVC: 2
2B2-2416: RNCC: 5 | RNVC: 9

13 Dec 1987

3040-01-291-5302
Linear Actuating Cylinder

012915302
644-410-AP: RNCC: 3 | RNVC: 2
60-902 PIECE 410: RNCC: 5 | RNVC: 9
644-410: RNCC: 5 | RNVC: 9
60-902: RNCC: D | RNVC: 9

29 Dec 1988

3040-01-290-1459
Linear Actuating Cylinder Assembly

012901459
H84B2B S/N 85297831: RNCC: 3 | RNVC: 9
85297831: RNCC: 5 | RNVC: 9
SRHHY84B2B4-51-1.75-3000-DA: RNCC: 5 | RNVC: 9
H84B2B-400-5100-175-S11-9: RNCC: 5 | RNVC: 9

7 Dec 1988

3040-01-259-4568
Shouldered Shaft

012594568
1363M96P01: RNCC: 3 | RNVC: 2
1363M96P01: RNCC: 5 | RNVC: 2
1363M96P01: RNCC: 5 | RNVC: 2
42411-166: RNCC: 5 | RNVC: 2
1363M96P01: RNCC: 5 | RNVC: 2
1363M96P01: RNCC: 5 | RNVC: 2
1363M96P01: RNCC: 5 | RNVC: 9
1363M96P01: RNCC: 5 | RNVC: 9

18 Jul 1987

3040-01-263-1022
Rigid Connecting Link

012631022
206-001-020-113: RNCC: 3 | RNVC: 2
206-001-020: RNCC: D | RNVC: 9

9 Sep 1987

3040-01-279-3952
Rigid Connecting Link

012793952
406-001-020-109: RNCC: 3 | RNVC: 2

18 May 1988

3040-01-280-4112
Straight Shaft

012804112
507254: RNCC: 3 | RNVC: 2
507254: RNCC: 3 | RNVC: 2
SH-7248 DETAIL 33: RNCC: 5 | RNVC: 9

9 Jun 1988

3040-01-274-3653
Shouldered Shaft

012743653
946784PH: RNCC: 3 | RNVC: 9
10951: RNCC: 5 | RNVC: 2
55-22216-15: RNCC: C | RNVC: 1
946784PH: RNCC: C | RNVC: 1
946784-D3PH: RNCC: C | RNVC: 1

8 Mar 1988

3040-01-284-7366
Shouldered Shaft

012847366
75A22036-005: RNCC: 3 | RNVC: 2

30 Aug 1988

3040-01-289-2367
Shouldered Shaft

012892367
505-4457352 ITEM 7: RNCC: 3 | RNVC: 2
7501-25 ITEM 7: RNCC: 5 | RNVC: 9
505-4457352: RNCC: D | RNVC: 9

18 Nov 1988

3040-01-273-9541
Gear Train

012739541
9A1681: RNCC: 3 | RNVC: 2

3 Mar 1988

3040-01-297-5194
Shouldered Shaft

012975194
21160022: RNCC: 3 | RNVC: 2
894-8159 FIGURE F02 INDEX 18: RNCC: 5 | RNVC: 2
21160022-1: RNCC: 5 | RNVC: 9

4 Apr 1989

3040-01-297-6579
Helical Gearshaft

012976579
5905691: RNCC: 3 | RNVC: 2
5905691: RNCC: 5 | RNVC: 2

5 Apr 1989

3040-01-251-9996
Worm Shaft

012519996
230-08-070-7007: RNCC: 3 | RNVC: 2

27 Mar 1987

3040-01-266-1405
Linear Actuating Cylinder Piston Rod

012661405
D84232 PIECE 39: RNCC: 3 | RNVC: 9
D84232: RNCC: D | RNVC: 9

21 Oct 1987

3040-01-274-8288
Spur Gearshaft

012748288
277458: RNCC: 3 | RNVC: 2

13 Mar 1988

3040-01-293-7163
Shouldered Shaft

012937163
DGR421P0001: RNCC: 3 | RNVC: 2
DGR4350K PT 7: RNCC: 5 | RNVC: 2
DGR421P0001: RNCC: 5 | RNVC: 9

4 Feb 1989

3040-01-276-1525
Bell Crank

012761525
209-062-740-101: RNCC: 3 | RNVC: 2

5 Apr 1988

3040-01-253-8773
Mechanical Drive Housing

012538773
7-311518021-5: RNCC: 3 | RNVC: 9
7-311518021-5: RNCC: C | RNVC: 1
7-311518021: RNCC: E | RNVC: 8

26 Apr 1987

3040-01-275-0626
Rotary Actuating Cylinder Assembly

012750626
46-1632: RNCC: 3 | RNVC: 2

17 Mar 1988

3040-01-277-6464
Shouldered Shaft

012776464
406-001-312-101: RNCC: 3 | RNVC: 2
406-001-312: RNCC: D | RNVC: 9

25 Apr 1988

3040-01-279-1007
Linear Actuating Cylinder Assembly

012791007
635 0739: RNCC: 3 | RNVC: 2

13 May 1988

3040-01-286-4928
Linear Actuating Cylinder Assembly

012864928
500CBB2HLTS14ACX21.00: RNCC: 3 | RNVC: 2
AG159828A0: RNCC: 5 | RNVC: 2
5CBB-2HLTS14ACX21.00: RNCC: 5 | RNVC: 2

2 Oct 1988

3040-01-278-2746
Worm Wheel Gearshaft

012782746
52032008: RNCC: 3 | RNVC: 2
520320: RNCC: D | RNVC: 9

3 May 1988

3040-01-281-1516
Linear Actuating Cylinder Piston

012811516
T418262: RNCC: 3 | RNVC: 9
T418262: RNCC: C | RNVC: 1

17 Jun 1988

3040-01-281-4426
Linear Actuating Cylinder Assembly Parts Kit

012814426
R905024640: RNCC: 3 | RNVC: 2
130982-S.K.: RNCC: 5 | RNVC: 9

23 Jun 1988

3040-01-293-8546
Straight Shaft

012938546
1130402: RNCC: 3 | RNVC: 2
314064 LINE 64: RNCC: 5 | RNVC: 2
1130402: RNCC: 5 | RNVC: 9

8 Feb 1989

3040-01-298-4242
Push-Pull Control Assembly

012984242
000-45101-0003: RNCC: 3 | RNVC: 2
4199887375: RNCC: 5 | RNVC: 2
4327104IN: RNCC: 5 | RNVC: 9
100-4327-0104: RNCC: 5 | RNVC: 9
45101-3: RNCC: 5 | RNVC: 9
100-4XX7-LGTH: RNCC: D | RNVC: 9

16 Apr 1989

3040-01-252-5910
Bell Crank

012525910
212-001-759-101: RNCC: 3 | RNVC: 2
212-001-759-101: RNCC: 5 | RNVC: 2

5 Apr 1987

3040-01-290-2520
Straight Shaft

012902520
SH721076AS: RNCC: 3 | RNVC: 2
SH721076A: RNCC: 5 | RNVC: 2

8 Dec 1988

3040-01-216-2324
Shaft Collar

012162324
72633-2-2210: RNCC: 3 | RNVC: 2

7 Sep 1985

3040-01-221-5848
Roller Shaft Assembly

012215848
BL-10603: RNCC: 3 | RNVC: 2

30 Nov 1985

3040-01-235-8594
Valve Pinion Shaft

012358594
6503-86 PIECE 133: RNCC: 3 | RNVC: 2
6503-86: RNCC: D | RNVC: 9

8 Jul 1986

3040-01-220-2187
Control Cam

012202187
27008-1030: RNCC: 3 | RNVC: 2

9 Nov 1985

3040-01-237-6151
Spur Gearshaft

012376151
95525-2: RNCC: 3 | RNVC: 2

3 Aug 1986

3040-01-253-8694
Rigid Connecting Link

012538694
68A500076-1001: RNCC: 3 | RNVC: 2
68A500076-1001: RNCC: 5 | RNVC: 2
68A500076-1001: RNCC: 5 | RNVC: 2
68A500076-1001: RNCC: 5 | RNVC: 9
68A500076: RNCC: D | RNVC: 9

26 Apr 1987

3040-01-251-9957
Helical Gearshaft

012519957
5210182: RNCC: 3 | RNVC: 2
5210182: RNCC: 5 | RNVC: 2

27 Mar 1987

3040-01-227-7990
Manual Control Lever

012277990
83-14883: RNCC: 3 | RNVC: 2
83-14883: RNCC: 5 | RNVC: 2
83-14883: RNCC: 5 | RNVC: 2
83-14883: RNCC: 5 | RNVC: 9
83-14883: RNCC: 5 | RNVC: 9

8 Mar 1986

3040-01-228-1694
Shaft Collar

012281694
EC-100-78: RNCC: 3 | RNVC: 2
SC125: RNCC: 5 | RNVC: 9

15 Mar 1986

3040-01-246-5171
Shouldered Shaft

012465171
A-9546: RNCC: 3 | RNVC: 9

13 Dec 1986

3040-01-231-6941
Linear Actuating Cylinder Assembly

012316941
AG146146DO: RNCC: 3 | RNVC: 2

2 May 1986

3040-01-232-2001
Rigid Connecting Link

012322001
7598-6325: RNCC: 3 | RNVC: 2
7008-17: RNCC: 5 | RNVC: 2
SR10785A6325: RNCC: 5 | RNVC: 9
LE162-0013-6325: RNCC: 7 | RNVC: 2

9 May 1986

3040-01-202-5626
Shaft Collar

012025626
S2110KBX2: RNCC: 3 | RNVC: 2
SG-4646 PIECE 037: RNCC: 3 | RNVC: 2
S-2110KBX2/0463: RNCC: 5 | RNVC: 9
S-2110KBX2/0463: RNCC: 5 | RNVC: 9

4 Mar 1985

3040-01-219-5695
Spur Gearshaft

012195695
182102-4: RNCC: 3 | RNVC: 2
182102-4: RNCC: 3 | RNVC: 2
182102-2: RNCC: 5 | RNVC: 9
182102: RNCC: D | RNVC: 9

29 Oct 1985

3040-01-225-9075
Linear Actuating Cylinder Piston

012259075
RC-4235: RNCC: 3 | RNVC: 2
RC-4288-H PIECE 361: RNCC: 5 | RNVC: 2

8 Feb 1986

3040-01-201-5510
Mechanical Drive Housing

012015510
007309-1: RNCC: 3 | RNVC: 2
007309-1: RNCC: 5 | RNVC: 9

20 Feb 1985

3040-01-234-4961
Linear Actuating Cylinder Assembly

012344961
1H2H0A00269969: RNCC: 3 | RNVC: 2
GG094615C0: RNCC: 5 | RNVC: 9
2 1/2BB-2HLTS14X4 1/8STK: RNCC: 5 | RNVC: 9

14 Jun 1986

3040-01-196-9778
Shouldered Shaft

011969778
A02D2067-2: RNCC: 3 | RNVC: 2

17 Dec 1984

3040-01-220-1308
Body Hub

012201308
BL-10566: RNCC: 3 | RNVC: 2

8 Nov 1985

3040-01-198-6314
Shouldered Shaft

011986314
172B4028P1: RNCC: 3 | RNVC: 2

11 Jan 1985

3040-01-240-1579
Valve Output Shaft

012401579
9778ER: RNCC: 3 | RNVC: 2

10 Sep 1986

3040-01-216-4110
Shouldered Shaft

012164110
35-79501-1102-2: RNCC: 3 | RNVC: 2
35-79501-1102-2: RNCC: 5 | RNVC: 1

10 Sep 1985

3040-01-220-5430
Shouldered Shaft

012205430
J180816: RNCC: 3 | RNVC: 2
B20035D137: RNCC: 5 | RNVC: 2

16 Nov 1985

3040-01-207-6957
Spur Gearshaft

012076957
NF203491-1: RNCC: 3 | RNVC: 2
NF203491-1: RNCC: 5 | RNVC: 9

4 May 1985

3040-01-225-4835
Rigid Connecting Link

012254835
SR12153A2: RNCC: 3 | RNVC: 2
S12153A2: RNCC: 5 | RNVC: 9

3 Feb 1986

3040-01-212-1185
Rigid Connecting Link

012121185
7098-1: RNCC: 3 | RNVC: 2
LE162-0042-0001: RNCC: 5 | RNVC: 9

6 Jul 1985

3040-01-234-3557
Linear Actuating Cylinder Assembly

012343557
GG094613D0: RNCC: 3 | RNVC: 2

13 Jun 1986

3040-01-234-9132
Mechanical Drive Housing

012349132
103077C: RNCC: 3 | RNVC: 2

21 Jun 1986

3040-01-200-9273
Linear Actuating Cylinder

012009273
GG094610H0: RNCC: 3 | RNVC: 2

10 Feb 1985

3040-01-214-3839
Rigid Connecting Link

012143839
6-768-001845: RNCC: 3 | RNVC: 2
2CT204: RNCC: 5 | RNVC: 2
2CT204: RNCC: 5 | RNVC: 9
6-294-006045: RNCC: D | RNVC: 9

9 Aug 1985

3040-01-206-6419
Bell Crank

012066419
L3223634-011: RNCC: 3 | RNVC: 2
L3223634-011: RNCC: 5 | RNVC: 2
L3223634-001: RNCC: 5 | RNVC: 9

20 Apr 1985

3040-01-213-1978
Shouldered Shaft

012131978
128LM10204-611: RNCC: 3 | RNVC: 2
128LM10204-611: RNCC: 5 | RNVC: 9

24 Jul 1985

3040-01-217-3317
Shouldered Shaft

012173317
266161: RNCC: 3 | RNVC: 2

26 Sep 1985

3040-01-248-1501
Shouldered Shaft

012481501
N62373: RNCC: 3 | RNVC: 2
62373: RNCC: 5 | RNVC: 9

16 Jan 1987

3040-01-216-7748
Linear Actuating Cylinder Assembly

012167748
1H000189047: RNCC: 3 | RNVC: 2
1.50CJ2HLTXS14AC10.250: RNCC: 5 | RNVC: 2
AG144774: RNCC: 5 | RNVC: 9
1 1/2CJBB2HLTS14CX10.250: RNCC: 5 | RNVC: 9

16 Sep 1985

3040-01-233-7351
Follow Up Rod

012337351
106037016: RNCC: 3 | RNVC: 2
106037016VM: RNCC: 5 | RNVC: 2

1 Jun 1986

3040-01-219-9987
Disk Brake Shoe

012199987
B520D004: RNCC: 3 | RNVC: 2
B520C003-D004: RNCC: C | RNVC: 1

6 Nov 1985

3040-01-203-2281
Disc Electric Brake

012032281
5-83075-51: RNCC: 3 | RNVC: 2
S/N 67760A: RNCC: 5 | RNVC: 2
67760A: RNCC: 5 | RNVC: 9
J80002: RNCC: 5 | RNVC: 9
5-83075-51-440VAC: RNCC: 5 | RNVC: 9

15 Nov 2000

3040-01-230-5636
Linear Actuating Cylinder Piston

012305636
8311-012: RNCC: 3 | RNVC: 9
2CX388: RNCC: 5 | RNVC: 2
2CX388: RNCC: 5 | RNVC: 9
8310-009: RNCC: D | RNVC: 9

16 Apr 1986

3040-01-228-1732
Multiple Gears Gearshaft

012281732
145D2305-3: RNCC: 3 | RNVC: 2
145D2305-3: RNCC: 5 | RNVC: 2

15 Mar 1986

3040-01-216-4106
Shouldered Shaft

012164106
2-24036: RNCC: 3 | RNVC: 2
2CB415: RNCC: 5 | RNVC: 2
2CB415: RNCC: 5 | RNVC: 9

10 Sep 1985

3040-01-246-5056
Straight Shaft

012465056
AFB3798B: RNCC: 3 | RNVC: 9
AFB3798B: RNCC: C | RNVC: 1

13 Dec 1986

3040-01-197-2114
Linear Actuating Cylinder Cap

011972114
515-4457068 ITEM 174: RNCC: 3 | RNVC: 2
6002-102 ITEM 174: RNCC: 5 | RNVC: 2
515-4457068: RNCC: D | RNVC: 9
6002-102: RNCC: D | RNVC: 9

19 Dec 1984

3040-01-206-1311
Rigid Connecting Link

012061311
1292316-103: RNCC: 3 | RNVC: 9
1292316-103: RNCC: 5 | RNVC: 9
1292316-103: RNCC: C | RNVC: 1

15 Apr 1985

3040-01-216-4321
Rigid Connecting Link

012164321
4900-149: RNCC: 3 | RNVC: 2
75J618002-149: RNCC: 5 | RNVC: 2
4900-137: RNCC: C | RNVC: 1
4900: RNCC: D | RNVC: 9

11 Sep 1985

3040-01-206-1309
Rigid Connecting Link

012061309
1292177-105: RNCC: 3 | RNVC: 2
1292177-105: RNCC: 5 | RNVC: 9
1292177-101: RNCC: 5 | RNVC: 9

15 Apr 1985

3040-01-215-2267
Shear Stack Valve Shaft

012152267
97-36-445: RNCC: 3 | RNVC: 2
2085-28 ITEM 46: RNCC: 5 | RNVC: 2
412-4638328 ITEM 46: RNCC: 5 | RNVC: 2
412-4638328: RNCC: D | RNVC: 9
2085-28: RNCC: D | RNVC: 9

22 Aug 1985

3040-01-201-6886
Rotating Shaft Eye Bracket

012016886
0-080-073-01: RNCC: 3 | RNVC: 2
V0-080-073-01: RNCC: 5 | RNVC: 2

20 Feb 1985

3040-01-242-2934
Shouldered Shaft

012422934
L5330578-003: RNCC: 3 | RNVC: 2

9 Oct 1986

3040-01-242-4596
Shouldered Shaft

012424596
12349796: RNCC: 3 | RNVC: 2

12 Oct 1986

3040-01-245-6007
Shaft Retaining Plate

012456007
70802-12215-045: RNCC: 3 | RNVC: 2

2 Dec 1986

3040-01-216-6818
Straight Shaft

012166818
27218018: RNCC: 3 | RNVC: 2
27218018: RNCC: 5 | RNVC: 9
27218018: RNCC: 5 | RNVC: 9

14 Sep 1985

3040-01-213-1694
Linear Actuating Cylinder Cap

012131694
27211: RNCC: 3 | RNVC: 2

24 Jul 1985

3040-01-251-6225
Hydraulic Accumulator Bladder

012516225
702516: RNCC: 3 | RNVC: 2
603978: RNCC: 5 | RNVC: 9

21 Mar 1987

3040-01-209-0400
Linear Actuating Cylinder Assembly Parts Kit

012090400
23678-59801: RNCC: 3 | RNVC: 2
23678-59801: RNCC: 5 | RNVC: 9

22 May 1985

3040-01-263-1020
Detent Plate

012631020
2901551-1: RNCC: 3 | RNVC: 2

9 Sep 1987

3040-01-234-3558
Linear Actuating Cylinder Assembly

012343558
GG094614B0: RNCC: 3 | RNVC: 2

13 Jun 1986

3040-01-176-2645
Shouldered Shaft

011762645
707015: RNCC: 3 | RNVC: 2

10 Apr 1984

3040-01-162-1047
Manual Control Lever

011621047
68A582024-2007: RNCC: 3 | RNVC: 2

14 Sep 1983

3040-01-188-3609
Shouldered Shaft

011883609
363C143-1: RNCC: 3 | RNVC: 2
363C143-1: RNCC: 5 | RNVC: 9

2 Sep 1984

3040-01-185-3200
Rigid Connecting Link

011853200
406-001-026-101: RNCC: 3 | RNVC: 2

27 Jul 1984

3040-01-181-9098
Shouldered Shaft

011819098
7-317221304: RNCC: 3 | RNVC: 2
7-317221304: RNCC: 5 | RNVC: 9

17 Jun 1984

3040-01-185-7523
Linear Actuating Cylinder Piston

011857523
L6317319-003: RNCC: 3 | RNVC: 2
L6317319-003: RNCC: 5 | RNVC: 2
L6317319-003: RNCC: 5 | RNVC: 2

3 Aug 1984

3040-01-208-0520
Rigid Connecting Link

012080520
1292055-103: RNCC: 3 | RNVC: 2
1292055-103: RNCC: 5 | RNVC: 2

8 May 1985

3040-01-177-5823
Shouldered Shaft

011775823
7-311518004: RNCC: 3 | RNVC: 2
7-311518004: RNCC: 5 | RNVC: 9

27 Apr 1984

3040-01-189-3403
Remote Control Lever

011893403
75A007227-2001: RNCC: 3 | RNVC: 9
75A007227-2001: RNCC: 5 | RNVC: 2
75A007227-2001: RNCC: C | RNVC: 1

14 Sep 1984

3040-01-160-5517
Spur Gearshaft

011605517
731808: RNCC: 3 | RNVC: 2

23 Aug 1983

3040-01-179-4355
Shouldered Shaft

011794355
14645: RNCC: 3 | RNVC: 2
H12892: RNCC: 5 | RNVC: 2
H12892: RNCC: 5 | RNVC: 9
14645: RNCC: 5 | RNVC: 9

18 May 1984

3040-01-160-9326
Counterbalance Weight

011609326
780957: RNCC: 3 | RNVC: 2

29 Aug 1983

3040-01-182-9562
Straight Shaft

011829562
7-217221103: RNCC: 3 | RNVC: 2
7-217221103: RNCC: 5 | RNVC: 2
7-217221103: RNCC: 5 | RNVC: 9
7-217221103: RNCC: 5 | RNVC: 9

1 Jul 1984

3040-01-181-6057
Rigid Connecting Link

011816057
7514-6054: RNCC: 3 | RNVC: 2
SR10784A-6054: RNCC: 5 | RNVC: 2
LE162-0002-6054: RNCC: 7 | RNVC: 2

5 Feb 2004

3040-01-189-8244
Pressure Plate

011898244
D105876: RNCC: 3 | RNVC: 2
E108186 PIECE 91: RNCC: 5 | RNVC: 2
E108494 FIND 91: RNCC: 5 | RNVC: 2
E108494 FIND 91: RNCC: 5 | RNVC: 9
E108186 PIECE 91: RNCC: 5 | RNVC: 9
D105876: RNCC: 5 | RNVC: 9
E108609 FIND 91: RNCC: C | RNVC: 1

20 Sep 1984

3040-01-191-8933
Rigid Connecting Link

011918933
7566-6205: RNCC: 3 | RNVC: 2
SR11578A-6205: RNCC: 3 | RNVC: 2
LE162-0056-6205: RNCC: 5 | RNVC: 2
LE162-0056: RNCC: 7 | RNVC: 1

13 Oct 1984

3040-01-194-7889
Control Cam

011947889
25-45744-0040-2: RNCC: 3 | RNVC: 2
25-45744-0042-2: RNCC: 5 | RNVC: 1
31-75105-4023-5 PC8: RNCC: 5 | RNVC: 9

17 Nov 1984

3040-01-195-7150
Helical Gearshaft

011957150
A-14048 PIECE 13: RNCC: 3 | RNVC: 2
C-14051-1: RNCC: 5 | RNVC: 2
C-14051-1: RNCC: 5 | RNVC: 9
A-14048 PIECE 13: RNCC: 5 | RNVC: 9

1 Dec 1984

3040-01-163-1357
Rigid Connecting Link

011631357
12328651: RNCC: 3 | RNVC: 2

28 Sep 1983

3040-01-180-3735
Friction Lining

011803735
2A1-00751-4: RNCC: 3 | RNVC: 2
2A1-751-3: RNCC: 5 | RNVC: 9
2B1-00751-4: RNCC: 5 | RNVC: 9

27 May 1984

3040-01-182-1019
Nonrotating Shaft Eye Bracket

011821019
HM025-685-1: RNCC: 1 | RNVC: 2
014213-1: RNCC: 3 | RNVC: 2
014213-1: RNCC: 5 | RNVC: 9

19 Jun 1984

3040-01-194-9784
Rigid Connecting Link

011949784
458-52261-1: RNCC: 3 | RNVC: 2

20 Nov 1984

3040-01-184-4686
Flexible Drive Shaft

011844686
9C00367-1: RNCC: 3 | RNVC: 2
9C00367: RNCC: 3 | RNVC: 9
9C00367-1: RNCC: 5 | RNVC: 2
52-W-2288-22: RNCC: 5 | RNVC: 9
6523-101-48: RNCC: 5 | RNVC: 9
6523-101-48: RNCC: 5 | RNVC: 9
3040PL1652330: RNCC: 6 | RNVC: 9

18 Jul 1984

3040-01-175-8891
Shouldered Shaft

011758891
70361-05006-107: RNCC: 3 | RNVC: 2

5 Apr 1984

3040-01-173-8377
Shouldered Shaft

011738377
P12612146: RNCC: 3 | RNVC: 9
10560042 ITEM 5: RNCC: 5 | RNVC: 9
10560042 ITEM 5: RNCC: C | RNVC: 1
P12612146: RNCC: C | RNVC: 1
10560042: RNCC: D | RNVC: 9

10 Mar 1984

3040-01-181-7077
Linear Actuating Cylinder Assembly

011817077
70324-1: RNCC: 3 | RNVC: 2

14 Jun 1984

Load More Results