What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 156 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 156 of 300

3040-01-041-2751
Linear Actuating Cylinder Piston

010412751
RM1-152: RNCC: 3 | RNVC: 9
1SR33: RNCC: 5 | RNVC: 2
1SR33: RNCC: 5 | RNVC: 9
RMI-152: RNCC: 5 | RNVC: 9

22 May 1977

3040-01-041-2610
Ball Joint

010412610
3217-2002-0: RNCC: 3 | RNVC: 2
1FC680: RNCC: 5 | RNVC: 2
1FC680: RNCC: 5 | RNVC: 9
99002006: RNCC: 5 | RNVC: 9

22 May 1977

3040-01-041-0540
Multiple Gears Gearshaft

010410540
22554: RNCC: 3 | RNVC: 2
22554: RNCC: C | RNVC: 1

19 May 1977

3040-01-040-8207
Fuel Pump Drive Shaft

010408207
3603685-1: RNCC: 3 | RNVC: 2

15 May 1977

3040-01-040-6679
Rigid Connecting Link

010406679
7-40816-9: RNCC: 3 | RNVC: 2
7-40816-9: RNCC: 3 | RNVC: 9
7-40816-9: RNCC: 5 | RNVC: 9

12 May 1977

3040-01-040-6673
Rigid Connecting Link

010406673
2-13432-8: RNCC: 3 | RNVC: 9
2-13432-8: RNCC: C | RNVC: 1

12 May 1977

3040-01-040-6671
Rigid Connecting Link

010406671
SR11049A: RNCC: 3 | RNVC: 2

12 May 1977

3040-01-040-6670
Rigid Connecting Link

010406670
14-13901-2: RNCC: 1 | RNVC: 2
6614-2: RNCC: 3 | RNVC: 2

12 May 1977

3040-01-040-3959
Rigid Connecting Link

010403959
2-74164-503: RNCC: 3 | RNVC: 9
2-74164-503: RNCC: C | RNVC: 1

7 May 1977

3040-01-040-2602
Shaft Collar

010402602
3009347: RNCC: 3 | RNVC: 2

5 May 1977

3040-01-040-2613
Rigid Connecting Link

010402613
ALK5-36: RNCC: 3 | RNVC: 2

5 May 1977

3040-00-933-1192
Shaft Collar

009331192
8436933: RNCC: 3 | RNVC: 2
3040009331192: RNCC: 6 | RNVC: 9

24 Feb 1967

3040-00-932-9644
Control Cam

009329644
5180323: RNCC: 3 | RNVC: 2
PC5180323: RNCC: 5 | RNVC: 2
K5180323: RNCC: 5 | RNVC: 9
5180323: RNCC: 5 | RNVC: 9

20 Feb 1967

3040-01-039-8925
Rigid Connecting Link

010398925
9-47362-3000: RNCC: 3 | RNVC: 2
9-47362-3000: RNCC: 5 | RNVC: 9

28 Apr 1977

3040-00-932-3475
Rigid Connecting Link

009323475
10943109: RNCC: 3 | RNVC: 2
2930009323475: RNCC: 5 | RNVC: 9

13 Feb 1967

3040-01-039-2637
Ships Speed I Shaft

010392637
1020D0515: RNCC: 3 | RNVC: 9

17 Apr 1977

3040-01-038-7704
Linear Actuating Cylinder

010387704
12007737: RNCC: 3 | RNVC: 2

11 Apr 1977

3040-01-038-7703
Linear Actuating Cylinder

010387703
12007729: RNCC: 3 | RNVC: 2

11 Apr 1977

3040-01-038-7279
Rotating Shaft Eye Bracket

010387279
12007979: RNCC: 3 | RNVC: 2

10 Apr 1977

3040-01-038-7187
Counterbalance Weight

010387187
12007804: RNCC: 3 | RNVC: 2

10 Apr 1977

3040-01-038-6046
Linear Actuating Cylinder

010386046
12007873: RNCC: 3 | RNVC: 2

9 Apr 1977

3040-01-038-2373
Linear Actuating Cylinder Assembly Parts Kit

010382373
1830359: RNCC: 3 | RNVC: 2
1830359: RNCC: 3 | RNVC: 9
1830359: RNCC: 5 | RNVC: 9

1 Apr 1977

3040-01-037-5779
Rigid Connecting Link

010375779
12007705: RNCC: 3 | RNVC: 2

21 Mar 1977

3040-01-037-5730
Linear Actuating Cylinder

010375730
12007745: RNCC: 3 | RNVC: 2

21 Mar 1977

3040-01-037-1123
Packing Gland Assembly

010371123
23848-1: RNCC: 3 | RNVC: 2
A25187-1: RNCC: 5 | RNVC: 9

14 Mar 1977

3040-01-036-7547
Link And Stud Assembly

010367547
LK581001AS: RNCC: 3 | RNVC: 2
LK581001AS: RNCC: 5 | RNVC: 9

5 Mar 1977

3040-01-036-7363
Linear Actuating Cylinder

010367363
S605833: RNCC: 3 | RNVC: 2

5 Mar 1977

3040-01-036-6757
Linear Actuating Cylinder

010366757
S605816: RNCC: 3 | RNVC: 2

5 Mar 1977

3040-01-036-6756
Linear Actuating Cylinder

010366756
801-446: RNCC: 3 | RNVC: 2
S611080: RNCC: 3 | RNVC: 2

5 Mar 1977

3040-01-036-1234
Hub Clamp

010361234
SMC752660: RNCC: 3 | RNVC: 2

22 Feb 1977

3040-00-924-9121
Straight Shaft

009249121
107B7952P1: RNCC: 3 | RNVC: 2

14 Jan 1966

3040-00-923-8676
Mechanical Drive Housing

009238676
2217322: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-01-035-8250
Shouldered Shaft

010358250
767660: RNCC: 3 | RNVC: 2

16 Feb 1977

3040-00-923-0895
Brake Drum

009230895
321508-1: RNCC: 3 | RNVC: 2
321508-1: RNCC: 5 | RNVC: 2
321508-1: RNCC: 5 | RNVC: 9

20 Jan 1966

3040-00-922-9414
Shaft Collar

009229414
1263723-13: RNCC: 3 | RNVC: 2
1263723-13: RNCC: 5 | RNVC: 9
1263723-13: RNCC: 5 | RNVC: 9

9 Jan 1966

3040-00-921-0478
Straight Shaft

009210478
7954473: RNCC: 3 | RNVC: 2
305342: RNCC: 5 | RNVC: 2

11 Dec 1965

3040-01-033-3647
Brake Disc

010333647
8-003-701-01: RNCC: 3 | RNVC: 9

4 Jan 1977

3040-00-919-9678
Drive Shaft

009199678
13720: RNCC: 3 | RNVC: 2
13720: RNCC: C | RNVC: 1

5 Aug 1966

3040-01-032-8406
Differential Spider

010328406
11675346: RNCC: 3 | RNVC: 2

23 Dec 1976

3040-01-032-8413
Straight Shaft

010328413
11675356: RNCC: 3 | RNVC: 2

23 Dec 1976

3040-01-032-7146
Shouldered Shaft

010327146
11675343: RNCC: 3 | RNVC: 2

18 Dec 1976

3040-01-032-5983
Push-Pull Control Assembly

010325983
39-RB-5: RNCC: 3 | RNVC: 9

16 Dec 1976

3040-01-032-5795
Linear Actuating Cylinder Assembly Parts Kit

010325795
DRK38R1-P6165: RNCC: 3 | RNVC: 2
RK6124-2: RNCC: 5 | RNVC: 2
D RK38R1: RNCC: 5 | RNVC: 9

16 Dec 1976

3040-01-032-0925
Rigid Connecting Link

010320925
220-24310-109: RNCC: 3 | RNVC: 2

6 Dec 1976

3040-01-031-9424
Shaft Retaining Plate

010319424
PL85108-1: RNCC: 3 | RNVC: 2

4 Dec 1976

3040-01-031-8848
Shouldered Shaft

010318848
1020C0510: RNCC: 3 | RNVC: 2
1020C0510: RNCC: 5 | RNVC: 9

2 Dec 1976

3040-00-918-6202
Remote Control Lever

009186202
10934826: RNCC: 3 | RNVC: 2
2530009186202: RNCC: 5 | RNVC: 9
2530009186202: RNCC: 6 | RNVC: 9

1 Jan 1960

3040-00-917-5999
Shaft Collar

009175999
470774: RNCC: 3 | RNVC: 2
455696: RNCC: 5 | RNVC: 9

29 Jul 1966

3040-00-916-6831
Shaft Collar

009166831
A80512-1: RNCC: 3 | RNVC: 2

22 Jul 1966

3040-01-029-5423
Spur Gearshaft

010295423
3020770: RNCC: 3 | RNVC: 2

17 Oct 1976

3040-01-029-5416
Control Cam

010295416
3240394: RNCC: 3 | RNVC: 9
3240394: RNCC: 5 | RNVC: 9

17 Oct 1976

3040-01-029-4605
Drive Gearshaft

010294605
3023640: RNCC: 3 | RNVC: 2

17 Oct 1976

3040-01-028-8646
Cam Roller Shoe

010288646
20117: RNCC: 3 | RNVC: 2
20117: RNCC: 5 | RNVC: 9

13 Oct 1976

3040-00-914-5177
Worm Shaft

009145177
8707582-1: RNCC: 3 | RNVC: 2

7 Mar 1966

3040-00-913-5898
Shouldered Shaft

009135898
10949690: RNCC: 3 | RNVC: 2
3040009135898: RNCC: 6 | RNVC: 9

1 Jan 1960

3040-01-027-4212
Seal Kit Assembly Lift Cylinder

010274212
A39400-1: RNCC: 3 | RNVC: 2

16 Sep 1976

3040-01-027-4213
Seal Kit Assembly Crowd Cylinder

010274213
A39498-1: RNCC: 3 | RNVC: 2

16 Sep 1976

3040-00-912-0598
Bevel Gearshaft

009120598
547555: RNCC: 3 | RNVC: 9
547555: RNCC: 5 | RNVC: 2
547555: RNCC: 5 | RNVC: 2

1 Jan 1960

3040-01-026-0709
Body Hub

010260709
11675539: RNCC: 3 | RNVC: 2

15 Aug 1976

3040-01-025-9900
Linear Actuating Cylinder Assembly

010259900
74863123: RNCC: 3 | RNVC: 2
4863123-8: RNCC: 5 | RNVC: 2
4839276-5: RNCC: C | RNVC: 1
74839276: RNCC: C | RNVC: 1
4839276: RNCC: C | RNVC: 1
4839276-5: RNCC: C | RNVC: 1

13 Aug 1976

3040-01-025-7315
Remote Control Lever

010257315
186796: RNCC: 3 | RNVC: 2
186796: RNCC: 5 | RNVC: 9

8 Aug 1976

3040-01-025-3688
Pawl

010253688
479998: RNCC: 3 | RNVC: 2
479998: RNCC: 5 | RNVC: 2
479998: RNCC: 5 | RNVC: 2
47998: RNCC: 5 | RNVC: 2
479998: RNCC: 5 | RNVC: 2
479998: RNCC: 5 | RNVC: 9

30 Jul 1976

3040-00-910-3721
Spur Gearshaft

009103721
10949798: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-01-024-9384
Straight Shaft

010249384
0N089607: RNCC: 3 | RNVC: 2

22 Jul 1976

3040-01-024-6098
Spur Gearshaft

010246098
3603685-3: RNCC: 3 | RNVC: 2
G586306C: RNCC: 5 | RNVC: 2
G586306C-3: RNCC: 5 | RNVC: 9

15 Jul 1976

3040-01-024-5143
Shaft Collar

010245143
26703: RNCC: 3 | RNVC: 2

12 Jul 1976

3040-01-024-3860
Winding Shaft

010243860
19-0605: RNCC: 3 | RNVC: 9

10 Jul 1976

3040-01-024-1001
Straight Shaft

010241001
9L6807: RNCC: 3 | RNVC: 2

4 Jul 1976

3040-01-023-4149
Remote Control Lever

010234149
11675413: RNCC: 3 | RNVC: 2

18 Jun 1976

3040-01-023-3522
Friction Lining

010233522
127984-10: RNCC: 3 | RNVC: 2
318244-37: RNCC: 5 | RNVC: 2

14 Jun 1976

3040-01-023-0872
Shaft Collar

010230872
2X571: RNCC: 3 | RNVC: 2
203004: RNCC: 5 | RNVC: 9

10 Jun 1976

3040-01-022-5305
Mechanical Drive Housing

010225305
10905271: RNCC: 3 | RNVC: 2

31 May 1976

3040-01-021-8860
Rigid Connecting Link

010218860
220-28440-101: RNCC: 3 | RNVC: 2

21 May 1976

3040-01-021-4872
Ball Joint

010214872
AH77100: RNCC: 3 | RNVC: 2
AH77100: RNCC: 5 | RNVC: 9
6058K13: RNCC: 5 | RNVC: 9
E107: RNCC: 5 | RNVC: 9
AA 5302R: RNCC: 5 | RNVC: 9
DH1900: RNCC: 5 | RNVC: 9

17 May 1976

3040-01-021-4837
Linear Actuating Cylinder Assembly

010214837
74872764-1: RNCC: 3 | RNVC: 2
7487264-1: RNCC: 3 | RNVC: 2
7008-169: RNCC: 5 | RNVC: 2
4820976: RNCC: 5 | RNVC: 9
7008-169: RNCC: 5 | RNVC: 9
4872764-8: RNCC: C | RNVC: 1

17 May 1976

3040-01-020-8726
Linear Actuating Cylinder Assembly

010208726
74839271: RNCC: 3 | RNVC: 2
4816883: RNCC: D | RNVC: 9

7 May 1976

3040-01-020-8158
Rigid Connecting Link

010208158
220-48401-102: RNCC: 3 | RNVC: 2

6 May 1976

3040-01-020-6282
Body Hub

010206282
3182950: RNCC: 3 | RNVC: 2
289-04E: RNCC: 5 | RNVC: 1
HX7/8: RNCC: 5 | RNVC: 1

1 May 1976

3040-01-019-4869
Body Hub

010194869
1020C0518: RNCC: 3 | RNVC: 2
1020C0518: RNCC: 3 | RNVC: 9

15 Apr 1976

3040-01-019-4844
Linear Actuating Cylinder Assembly

010194844
AU404: RNCC: 3 | RNVC: 2
AU 40414: RNCC: 5 | RNVC: 9
AU 40414: RNCC: 5 | RNVC: 9

15 Apr 1976

3040-01-019-2930
Linear Actuating Cylinder Assembly

010192930
1887125-15: RNCC: 3 | RNVC: 2
MM040PB201251BENB4.00: RNCC: 5 | RNVC: 2
1H000069716: RNCC: 5 | RNVC: 2
S-73141: RNCC: 5 | RNVC: 2
1887125-015: RNCC: 5 | RNVC: 9

14 Apr 1976

3040-01-019-2779
Linear Actuating Cylinder Assembly Parts Kit

010192779
RE18751: RNCC: 3 | RNVC: 2
AT36829: RNCC: 5 | RNVC: 9
AT36829: RNCC: 5 | RNVC: 9
AT 36829: RNCC: 5 | RNVC: 9
AR105405: RNCC: 5 | RNVC: 9
AR96511: RNCC: 5 | RNVC: 9

14 Apr 1976

3040-01-019-2229
Linear Actuating Cylinder Assembly Parts Kit

010192229
AT 35934: RNCC: 3 | RNVC: 2

14 Apr 1976

3040-01-019-0142
Shouldered Shaft

010190142
66-8348: RNCC: 3 | RNVC: 2
66-8348: RNCC: 5 | RNVC: 9

13 Apr 1976

3040-01-018-7781
Shaft Retaining Plate

010187781
397826: RNCC: 3 | RNVC: 2

30 Mar 1976

3040-01-018-4836
Linear Actuating Cylinder Assembly

010184836
8J8683: RNCC: 3 | RNVC: 2

29 Mar 1976

3040-01-018-4723
Straight Shaft

010184723
685-007-120: RNCC: 3 | RNVC: 2
RAB1093: RNCC: 5 | RNVC: 2
685-007-120: RNCC: 5 | RNVC: 2
685.007.120: RNCC: 5 | RNVC: 2

29 Mar 1976

3040-00-900-6766
Rigid Connecting Link

009006766
161652R1: RNCC: 3 | RNVC: 2

6 Feb 1967

3040-00-898-8014
Spur Gearshaft

008988014
150815: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-891-1134
Remote Control Lever

008911134
10861497: RNCC: 3 | RNVC: 2
2510008911134: RNCC: 5 | RNVC: 9

13 Jan 1967

3040-00-889-6945
Shaft Collar

008896945
119143-2: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-887-9473
Brake

008879473
413657: RNCC: 3 | RNVC: 2
A02CEB: RNCC: 5 | RNVC: 2
3040PL1523236: RNCC: 6 | RNVC: 9
K652254-1: RNCC: 7 | RNVC: 2
Z01CEB-EB: RNCC: C | RNVC: 1
A02CEB-EB: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-887-8914
Carr Reaction Shaft

008878914
10908693: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-883-8064
Push-Pull Control Assembly

008838064
172-VGG-2-35: RNCC: 3 | RNVC: 2
172-VGG-2-35: RNCC: 5 | RNVC: 2
11072207: RNCC: 5 | RNVC: 2
172-553-2-00-VC-35: RNCC: 5 | RNVC: 2
172-553-2-00-VC-35: RNCC: 5 | RNVC: 9
160-553-2-00VC35: RNCC: 5 | RNVC: 9
1440008838064: RNCC: 5 | RNVC: 9
11072207: RNCC: 7 | RNVC: 2

17 Nov 1967

3040-00-881-3918
Shouldered Shaft

008813918
1755648: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-877-3547
Shouldered Shaft

008773547
23007319: RNCC: 3 | RNVC: 2
23007319: RNCC: 3 | RNVC: 2
23007319: RNCC: 3 | RNVC: 2
23007319: RNCC: 5 | RNVC: 2
23007319: RNCC: 5 | RNVC: 2
6825237: RNCC: 5 | RNVC: 9
23007319: RNCC: 5 | RNVC: 9
6825237: RNCC: 5 | RNVC: 9
6825237: RNCC: 5 | RNVC: 9
23007319: RNCC: C | RNVC: 1

1 Jan 1962

3040-00-877-3539
Mechanical Drive Housing

008773539
23056974: RNCC: 3 | RNVC: 2
23056974: RNCC: 3 | RNVC: 2
6841772: RNCC: 5 | RNVC: 9
6841772: RNCC: 5 | RNVC: 9
6841772: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-872-0843
Shaft Collar

008720843
064-12318-005: RNCC: 3 | RNVC: 2
64-9930PC72: RNCC: 5 | RNVC: 2
64-12318C005: RNCC: 5 | RNVC: 9
064-12318005: RNCC: 5 | RNVC: 9
64-12318-005: RNCC: 5 | RNVC: 9
064-5210: RNCC: 5 | RNVC: 9
64-5210PL: RNCC: 5 | RNVC: 9
364-48756-000 ITEM 6: RNCC: C | RNVC: 1

1 Jan 1960

3040-00-870-6254
Spur Gearshaft

008706254
10908268: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-870-6253
Spur Gearshaft

008706253
10908280: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-870-6252
Shouldered Shaft

008706252
10908275: RNCC: 3 | RNVC: 2
3010008706252: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-869-9287
Shouldered Shaft

008699287
30000761: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-865-7716
Shaft Collar

008657716
8267831: RNCC: 3 | RNVC: 2

18 Oct 1967

3040-00-972-2638
Linear Actuating Cylinder Assembly

009722638
10876213: RNCC: 3 | RNVC: 2
2046069: RNCC: 5 | RNVC: 2
3040009722638: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-972-2639
Linear Actuating Cylinder Assembly

009722639
10876210: RNCC: 3 | RNVC: 2
2046068: RNCC: 5 | RNVC: 2
3040009722639: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-863-3735
Shouldered Shaft

008633735
21482: RNCC: 3 | RNVC: 9
21482: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-858-9251
Shaft Collar

008589251
150817: RNCC: 3 | RNVC: 9

1 Jan 1962

3040-00-858-6530
Control Cam

008586530
800558: RNCC: 3 | RNVC: 2
11684: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-858-6479
Shouldered Shaft

008586479
809043: RNCC: 3 | RNVC: 2
SMB414486ANDSMB414487: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-845-3280
Shaft Collar

008453280
0360-1: RNCC: 3 | RNVC: 2
0360-1: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-00-839-6892
Rigid Connecting Link

008396892
317376-1: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-832-8074
Shouldered Shaft

008328074
10948099: RNCC: 3 | RNVC: 2
2520008328074: RNCC: 5 | RNVC: 9
2297C1537: RNCC: 5 | RNVC: 9

17 Mar 1967

3040-00-832-0823
Spur Gear Shaft

008320823
K674438-11: RNCC: 3 | RNVC: 2
K674438-11: RNCC: 5 | RNVC: 2
K677703-13: RNCC: C | RNVC: 1

18 Apr 1972

3040-00-831-2618
Magnetic Clut Brake

008312618
140153-000: RNCC: 3 | RNVC: 2
FFRB8-5B: RNCC: 5 | RNVC: 2
140153-000: RNCC: 5 | RNVC: 9
FFRB8-5B: RNCC: 5 | RNVC: 9
140153-000: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-830-9784
Remote Control Lever

008309784
10949633: RNCC: 3 | RNVC: 2

6 Sep 1967

3040-00-826-5468
Rotating Shaft Eye Bracket

008265468
2579758: RNCC: 3 | RNVC: 9
2579758: RNCC: 5 | RNVC: 9

21 Aug 1967

3040-00-826-5465
Rotating Shaft Eye Bracket

008265465
2586635: RNCC: 3 | RNVC: 9
2586635: RNCC: 5 | RNVC: 2

21 Aug 1967

3040-00-822-3625
Spur Gearshaft

008223625
3123345: RNCC: 3 | RNVC: 9
3123345: RNCC: C | RNVC: 1

1 Jan 1962

3040-00-818-9785
Linear Actuating Cylinder

008189785
R575-30B: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-808-7450
Mechanical Drive Housing

008087450
10948109: RNCC: 3 | RNVC: 2
2520008087450: RNCC: 5 | RNVC: 9
3875W699: RNCC: 5 | RNVC: 9

8 May 1968

3040-00-808-7441
Shouldered Shaft

008087441
11621145: RNCC: 3 | RNVC: 2
388Q1109: RNCC: 5 | RNVC: 9
3040008087441: RNCC: 5 | RNVC: 9

8 May 1968

3040-00-807-9976
Control Cam

008079976
903946-1: RNCC: 3 | RNVC: 2
903946-1: RNCC: 5 | RNVC: 2
903946-1: RNCC: 5 | RNVC: 2
903946-1: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-805-6232
Straight Shaft

008056232
546-6231-002: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-801-1038
Bell Crank

008011038
10902229: RNCC: 3 | RNVC: 2
2910008011038: RNCC: 5 | RNVC: 9

22 Mar 1968

3040-00-800-2841
Accelerator Bracket

008002841
10932870: RNCC: 3 | RNVC: 2
2590008002841: RNCC: 5 | RNVC: 9
3040PL0883171: RNCC: 6 | RNVC: 9
K1482: RNCC: 8 | RNVC: 1
10932870: RNCC: 8 | RNVC: 1

8 Mar 1968

3040-00-789-7620
Shaft Collar

007897620
10941431: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-789-1596
Control Cam

007891596
357556-5: RNCC: 3 | RNVC: 2
2210471: RNCC: 3 | RNVC: 9

1 Jan 1962

3040-00-787-1617
Shaft Collar

007871617
327470: RNCC: 3 | RNVC: 2
327470: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-782-4198
Mechanical Drive Housing

007824198
10861308: RNCC: 3 | RNVC: 2
3040007824198: RNCC: 6 | RNVC: 9

19 Feb 1968

3040-00-782-4199
Mechanical Drive Housing

007824199
8756604: RNCC: 3 | RNVC: 2
2520007824199: RNCC: 5 | RNVC: 9

19 Feb 1968

3040-00-782-1709
Rotating Shaft Eye Bracket

007821709
10916688: RNCC: 3 | RNVC: 2
2520007821709: RNCC: 5 | RNVC: 9
2520007821709: RNCC: 6 | RNVC: 9

2 Feb 1968

3040-00-781-8529
Remote Control Lever

007818529
8763446: RNCC: 3 | RNVC: 2
2510007818529: RNCC: 5 | RNVC: 9

19 Jan 1968

3040-00-781-8309
Control Cam

007818309
8756765: RNCC: 3 | RNVC: 2
3040007818309: RNCC: 5 | RNVC: 9
2520007818309: RNCC: 5 | RNVC: 9

15 Jan 1968

3040-00-781-8184
Mechanical Drive Housing

007818184
10863486: RNCC: 3 | RNVC: 2

12 Jan 1968

3040-00-777-8275
Shouldered Shaft

007778275
347-248: RNCC: 3 | RNVC: 2
347-248: RNCC: 3 | RNVC: 9
60-347-248: RNCC: 5 | RNVC: 9
60-347PC248: RNCC: 5 | RNVC: 9
60-671PC248: RNCC: 5 | RNVC: 9
60-686PC248: RNCC: 5 | RNVC: 9
60-346PC248: RNCC: 5 | RNVC: 9
60-506PC248: RNCC: 5 | RNVC: 9
60-531PC248: RNCC: 5 | RNVC: 9
60-457PC248: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-775-4024
Shouldered Shaft

007754024
288C736-1: RNCC: 3 | RNVC: 2
7093E66PC20: RNCC: 5 | RNVC: 9
288C736-1: RNCC: 5 | RNVC: 9
288C736-1: RNCC: 5 | RNVC: 9
288C736 PIECE1: RNCC: 5 | RNVC: 9
288C736 PIECE1: RNCC: C | RNVC: 1
288C736 PIECE1: RNCC: C | RNVC: 1

1 Jan 1962

3040-00-771-8099
Control Cam

007718099
7718099: RNCC: 3 | RNVC: 2
7718099: RNCC: 3 | RNVC: 2
7718099: RNCC: 5 | RNVC: 2
2510007718099: RNCC: 5 | RNVC: 9
3040007718099: RNCC: 5 | RNVC: 9
7718099: RNCC: 5 | RNVC: 9
2510007718099: RNCC: 6 | RNVC: 9
3040007718099: RNCC: 6 | RNVC: 9

1 Jan 1962

3040-00-769-8327
Spur Gearshaft

007698327
7698327: RNCC: 3 | RNVC: 2

29 Dec 1967

3040-00-767-5413
Manual Control Lever

007675413
10875159: RNCC: 3 | RNVC: 2
6770408: RNCC: 5 | RNVC: 2
2520007675413: RNCC: 5 | RNVC: 9
6770408: RNCC: 5 | RNVC: 9
10875159: RNCC: 8 | RNVC: 2

1 Jan 1963

3040-00-767-4709
Shaft Collar

007674709
542-4543-002: RNCC: 3 | RNVC: 2

29 Dec 1967

3040-00-767-0981
Shaft Collar

007670981
542-4570-002: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-766-8627
Bevel Gearshaft

007668627
1-070-140-01: RNCC: 3 | RNVC: 2
1-070-140-01: RNCC: 5 | RNVC: 2
1-070-140-01: RNCC: 5 | RNVC: 9
1-070-140-01: RNCC: 7 | RNVC: 2
1-070-140-01: RNCC: 8 | RNVC: 2

1 Jan 1962

3040-00-763-2787
Shaft Collar

007632787
7632787: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-756-2046
Shaft Collar

007562046
9982434: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-756-2045
Shaft Collar

007562045
9982324: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-753-9248
Remote Control Lever

007539248
7539248: RNCC: 3 | RNVC: 2
7539248: RNCC: 5 | RNVC: 2
2540007539248: RNCC: 5 | RNVC: 9
913085: RNCC: 5 | RNVC: 9
753M3: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-753-9137
Rigid Connecting Link

007539137
845H4: RNCC: 3 | RNVC: 2
7539137: RNCC: 5 | RNVC: 2
2540007539137: RNCC: 5 | RNVC: 9
913500: RNCC: 5 | RNVC: 9
2540007539137: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-753-8746
Shaft Collar

007538746
2297680: RNCC: 3 | RNVC: 9
98-1263: RNCC: 5 | RNVC: 2
7538746: RNCC: 5 | RNVC: 2
3040007538746: RNCC: 5 | RNVC: 9
1727P2: RNCC: 5 | RNVC: 9
2297680: RNCC: 5 | RNVC: 9
669700: RNCC: 5 | RNVC: 9
2297680: RNCC: C | RNVC: 1

1 Jan 1962

3040-00-753-8673
Shouldered Shaft

007538673
3P123: RNCC: 3 | RNVC: 2
7538673: RNCC: 3 | RNVC: 2
2388T2: RNCC: 5 | RNVC: 9
914866: RNCC: 5 | RNVC: 9
2388T2: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-752-9238
Remote Control Lever

007529238
100910R1: RNCC: 3 | RNVC: 2
7529238: RNCC: 3 | RNVC: 2
880H4: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-752-1047
Straight Shaft

007521047
30-60-13: RNCC: 3 | RNVC: 2
7521047: RNCC: 5 | RNVC: 2
914110: RNCC: 5 | RNVC: 9
2353T2: RNCC: 5 | RNVC: 9
2353T2: RNCC: 5 | RNVC: 9
2520007521047: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-752-1019
Shouldered Shaft

007521019
7521019: RNCC: 3 | RNVC: 2
30-362-11: RNCC: 5 | RNVC: 2
914090: RNCC: 5 | RNVC: 9
2520007521019: RNCC: 5 | RNVC: 9
2335T2: RNCC: 5 | RNVC: 9
30-362-11: RNCC: 5 | RNVC: 9
2335T2: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-740-9935
Remote Control Lever

007409935
M305831: RNCC: 3 | RNVC: 2
7409935: RNCC: 5 | RNVC: 2
KC2741: RNCC: 5 | RNVC: 9
M23023: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-739-4723
Shouldered Shaft

007394723
737136: RNCC: 3 | RNVC: 9
NH7025PC507: RNCC: 5 | RNVC: 9
507NC4008: RNCC: 5 | RNVC: 9
737136: RNCC: 5 | RNVC: 9
NC4008PC507: RNCC: 5 | RNVC: 9
737136: RNCC: C | RNVC: 1
737136: RNCC: C | RNVC: 1
NC4008: RNCC: D | RNVC: 9
NH7025: RNCC: D | RNVC: 9

1 Jan 1963

3040-00-738-3883
Automatic Pil Shaft

007383883
1716227: RNCC: 3 | RNVC: 2
1716227: RNCC: 5 | RNVC: 2
1716227: RNCC: 5 | RNVC: 2
1716227: RNCC: 5 | RNVC: 9
1716227: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-737-2826
Rigid Connecting Link

007372826
640123: RNCC: 3 | RNVC: 2
7372826: RNCC: 5 | RNVC: 2
640123: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-734-9142
Brake Drum

007349142
37122: RNCC: 3 | RNVC: 2
7349142: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-723-5971
Mechanical Drive Housing

007235971
7235971: RNCC: 3 | RNVC: 2
1015007235971: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-719-7914
Counterbalance Weight

007197914
37C300017P107: RNCC: 3 | RNVC: 2
37C300017P107: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-730-0439
Spur Gearshaft

007300439
907M650024: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-727-8890
Rigid Connecting Link

007278890
911640-105: RNCC: 3 | RNVC: 9
911640-105: RNCC: 5 | RNVC: 9

16 Feb 1968

3040-00-720-3261
Shaft Collar

007203261
9058828: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-720-3146
Shaft Collar

007203146
9067085: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-717-3219
Hub Clamp

007173219
450-5105: RNCC: 3 | RNVC: 2
100894-000: RNCC: 5 | RNVC: 2
450-5105: RNCC: 5 | RNVC: 9
450-5105: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-707-7554
Rigid Connecting Link

007077554
204-030-491-1: RNCC: 3 | RNVC: 2
204-030-491-001: RNCC: 5 | RNVC: 2
61-342: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-706-2892
Shaft Collar

007062892
326612: RNCC: 3 | RNVC: 2
326612: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-706-0638
Shaft Collar

007060638
159896: RNCC: 3 | RNVC: 2
159896: RNCC: 5 | RNVC: 9
159896: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-701-2321
Brake

007012321
BUWEPSDWG1653452: RNCC: 3 | RNVC: 2
1653452: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-700-5109
Bell Crank

007005109
EA2379: RNCC: 3 | RNVC: 2
7005109: RNCC: 3 | RNVC: 2
608234: RNCC: 5 | RNVC: 2
FA2379: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-00-693-5106
Shaft Collar

006935106
588850PC7: RNCC: 3 | RNVC: 2
T9161665PC7: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-692-5194
Bell Crank

006925194
7995810: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-678-8394
Remote Control Lever

006788394
10932902: RNCC: 3 | RNVC: 2
2520006788394: RNCC: 6 | RNVC: 9
3040006788394: RNCC: 6 | RNVC: 9
10932902: RNCC: 8 | RNVC: 2

1 Jan 1961

3040-00-678-6768
Rigid Connecting Link

006786768
10864139: RNCC: 3 | RNVC: 2
2530006786768: RNCC: 5 | RNVC: 9
2530006786768: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-678-4827
Shaft Collar

006784827
3324883: RNCC: 3 | RNVC: 2
3324883: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-678-4728
Spur Gearshaft

006784728
8682729: RNCC: 3 | RNVC: 2
3040006784728: RNCC: 5 | RNVC: 9
3040006784728: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-677-0484
Plate Dial Shaft

006770484
SMB333470: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-673-0947
Governor Shaft

006730947
329389: RNCC: 3 | RNVC: 2
329389: RNCC: 5 | RNVC: 9
329389: RNCC: 5 | RNVC: 9
329389: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-653-7726
Brake Drum

006537726
6537726: RNCC: 3 | RNVC: 2
1015-653-7726: RNCC: 5 | RNVC: 9
1015006537726: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-633-7637
Shouldered Shaft

006337637
872517: RNCC: 3 | RNVC: 2
872517: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-633-7559
Shaft Collar

006337559
872589: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-626-9166
Shaft Retaining Plate

006269166
6269166: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-626-9150
Shaft Retaining Plate

006269150
6269150: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-626-1743
Shaft Collar

006261743
8421620: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-626-1098
Pawl

006261098
ARMYDWG6261098: RNCC: 3 | RNVC: 2
6261098: RNCC: 3 | RNVC: 2
A20216: RNCC: 5 | RNVC: 2
6261098: RNCC: 5 | RNVC: 2
1005-626-1098: RNCC: 5 | RNVC: 9
1005-626-1098: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-622-1316
Linear Actuating Cylinder Assembly

006221316
WSPDA148: RNCC: 3 | RNVC: 2
G-104944: RNCC: 5 | RNVC: 2
104944: RNCC: 5 | RNVC: 2
B-24655: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-620-5710
Remote Control Lever

006205710
7H060Z: RNCC: 3 | RNVC: 2
7H602: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-618-6549
Shaft Collar

006186549
8529598: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-469-9205
Shouldered Shaft

004699205
178593: RNCC: 3 | RNVC: 2
178262: RNCC: 5 | RNVC: 2

28 Jan 1970

3040-00-615-7647
Shouldered Shaft

006157647
6157647: RNCC: 3 | RNVC: 2
1015006157647: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-614-7057
Straight Shaft

006147057
11671013: RNCC: 3 | RNVC: 2
2910006147057: RNCC: 5 | RNVC: 9

12 Feb 1975

3040-00-613-6613
Bell Crank

006136613
11671010: RNCC: 3 | RNVC: 2

8 Feb 1975

3040-00-613-6496
Elevator Shaft

006136496
370343-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-609-8491
Shouldered Shaft

006098491
7001576: RNCC: 3 | RNVC: 2
7001576: RNCC: 3 | RNVC: 9
49065A: RNCC: 5 | RNVC: 9
49065A: RNCC: C | RNVC: 1

30 Jan 1975

3040-00-609-8338
Push-Pull Control Assembly

006098338
90-3339-16FT: RNCC: 3 | RNVC: 2
3039-075-0476 AND 3006000-001: RNCC: 3 | RNVC: 2
A5951-014: RNCC: 3 | RNVC: 2
19V03-3-192: RNCC: 3 | RNVC: 2
D44194-003-192: RNCC: 5 | RNVC: 9
19V03-3-192: RNCC: 5 | RNVC: 9
D44194-003-192: RNCC: 5 | RNVC: 9
90-3339-16FT: RNCC: 5 | RNVC: 9

5 Feb 1975

3040-00-607-2458
Shaft Collar

006072458
8416885: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-603-6080
Shaft Retaining Plate

006036080
370709-1: RNCC: 3 | RNVC: 2
SS1441: RNCC: 5 | RNVC: 2
PS370709-1: RNCC: 5 | RNVC: 2
TIP00984-12JAN71: RNCC: 5 | RNVC: 2
370709-1: RNCC: 5 | RNVC: 9
PS370709-1: RNCC: 5 | RNVC: 9
PS370709-1: RNCC: C | RNVC: 1
370709-1: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-600-2698
Control Cam

006002698
SC-B-69594: RNCC: 3 | RNVC: 2
SC-B-69594: RNCC: 5 | RNVC: 9
50317A: RNCC: 5 | RNVC: 9
50317: RNCC: 5 | RNVC: 9
SC-B-69594: RNCC: 5 | RNVC: 9
50317: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-593-3883
Shouldered Shaft Assembly

005933883
530905-1: RNCC: 3 | RNVC: 9
530905-1: RNCC: 5 | RNVC: 2
52974: RNCC: 5 | RNVC: 9
530905-1: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-582-5104
Straight Shaft

005825104
737162: RNCC: 3 | RNVC: 9
B3038: RNCC: 5 | RNVC: 9
PLH7814PC138: RNCC: 5 | RNVC: 9
737162: RNCC: 5 | RNVC: 9
737162: RNCC: C | RNVC: 1
737162: RNCC: C | RNVC: 1

21 Dec 1974

3040-00-580-5709
Straight Shaft

005805709
907M630004: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-573-6597
Shaft Collar

005736597
1242411: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-571-8119
Shouldered Shaft

005718119
7972965: RNCC: 3 | RNVC: 2
3040005718119: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-571-3575
Brake Disc

005713575
4067-16: RNCC: 3 | RNVC: 2
4067-16: RNCC: 3 | RNVC: 9
4067C16: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-393-4527
Shaft Collar

003934527
11223: RNCC: 3 | RNVC: 2
N37051-1-72E: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-569-7370
Shaft Collar

005697370
7772274: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-566-3837
Straight Shaft

005663837
7973804: RNCC: 3 | RNVC: 2
3040005663837: RNCC: 5 | RNVC: 9
CTG19: RNCC: 5 | RNVC: 9
3040005663837: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-563-4975
Bell Crank

005634975
11610829: RNCC: 3 | RNVC: 2
2530005634975: RNCC: 5 | RNVC: 9
2530005634975: RNCC: 6 | RNVC: 9

17 Oct 1969

3040-00-560-1072
Hub Clamp

005601072
450-5106: RNCC: 3 | RNVC: 2
100895-000: RNCC: 5 | RNVC: 2
210-5070: RNCC: 5 | RNVC: 9
450-5106: RNCC: 5 | RNVC: 9
450-5106: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-556-9014
Shouldered Shaft

005569014
5569014: RNCC: 3 | RNVC: 2
1015005569014: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-550-8461
Pawl

005508461
5508461: RNCC: 3 | RNVC: 2
1005-550-8461: RNCC: 5 | RNVC: 9
1005-550-8461: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-295-9213
Rigid Connecting Link

002959213
68A733040-2005: RNCC: 3 | RNVC: 2
68A733040-2005: RNCC: 5 | RNVC: 2
68A733040: RNCC: D | RNVC: 9

28 Sep 1973

3040-00-540-6470
Brake Drum

005406470
404599: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-534-7192
Rigid Connecting Link

005347192
5347192: RNCC: 3 | RNVC: 2
2510005347192: RNCC: 5 | RNVC: 9
2510005347192: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-531-7321
Shaft Collar

005317321
5317321: RNCC: 3 | RNVC: 2
5317321: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-531-5078
Shaft Collar

005315078
5315078: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-531-4277
Shaft Collar

005314277
5314277: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-531-0692
Shaft Retaining Plate

005310692
5310692: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-529-1136
Shaft Collar

005291136
A458-730: RNCC: 3 | RNVC: 9
43P200735: RNCC: 5 | RNVC: 2
85353: RNCC: 5 | RNVC: 9
458-730: RNCC: 5 | RNVC: 9
A458-730: RNCC: C | RNVC: 1
85353: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-520-6757
Shaft Collar

005206757
5206757: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-518-9838
Control Cam

005189838
5189838: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-517-2781
Shaft Collar

005172781
5172781: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-508-9045
Rigid Connecting Link

005089045
68A327181-1003: RNCC: 3 | RNVC: 2
68A327181-1003: RNCC: 5 | RNVC: 9

26 Jul 1974

3040-00-507-9982
Flexible Shaft Assembly Core

005079982
418049-65IN: RNCC: 3 | RNVC: 2
MIL-S-10215: RNCC: 4 | RNVC: 1
MS51072: RNCC: 4 | RNVC: 1
8366052: RNCC: 5 | RNVC: 2
1582160: RNCC: 5 | RNVC: 9
1582160: RNCC: 5 | RNVC: 9
1582160: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-506-7881
Pawl

005067881
HR30115: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-502-5253
Shaft Collar

005025253
5025253: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-494-9519
Nonrotating Shaft Eye Bracket

004949519
10917642: RNCC: 3 | RNVC: 2

11 Jun 1969

3040-00-485-9232
Remote Control Lever

004859232
5J3200: RNCC: 3 | RNVC: 2

28 May 1969

3040-00-485-8333
Turbine E Counter Balance Weight

004858333
3010117CL5: RNCC: 3 | RNVC: 2
3010117CL5: RNCC: 5 | RNVC: 2

26 May 1969

3040-00-484-8119
Shaft Collar

004848119
569A953P1: RNCC: 3 | RNVC: 2

25 Sep 1970

3040-00-478-3766
Shaft Collar

004783766
008-011: RNCC: 3 | RNVC: 2
008-011: RNCC: 5 | RNVC: 9

25 Jun 1971

3040-00-477-6437
Shouldered Shaft

004776437
91349-001: RNCC: 3 | RNVC: 9
LA91349: RNCC: 5 | RNVC: 9
91349: RNCC: 5 | RNVC: 9
LA91349: RNCC: 5 | RNVC: 9
913949-001: RNCC: 5 | RNVC: 9
91349: RNCC: 5 | RNVC: 9
LA91349: RNCC: 5 | RNVC: 9
913949-001: RNCC: C | RNVC: 1
91349-001: RNCC: C | RNVC: 1
91349-001: RNCC: C | RNVC: 1

23 May 1969

3040-00-157-1310
Remote Control Lever

001571310
416994PC1: RNCC: 3 | RNVC: 2
416994PC1: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-466-2293
Rigid Connecting Link

004662293
252AS112-2: RNCC: 3 | RNVC: 2

23 Jan 1970

3040-00-464-6178
Shaft Collar

004646178
1028604-5: RNCC: 3 | RNVC: 2
EH2-2: RNCC: C | RNVC: 1
1028604-5: RNCC: C | RNVC: 1

21 May 1969

3040-00-455-9499
Mechanical Drive Housing

004559499
10904851: RNCC: 3 | RNVC: 2
2520004559499: RNCC: 5 | RNVC: 9

21 Apr 1969

3040-00-455-5172
Control Cam

004555172
034-24686Y: RNCC: 3 | RNVC: 2
23176-208510-10-0: RNCC: 5 | RNVC: 2
23176-208510-10-0: RNCC: 5 | RNVC: 2
034-24686: RNCC: 5 | RNVC: 2
034-24686Y: RNCC: 5 | RNVC: 2
034-24686: RNCC: 5 | RNVC: 2
10489417: RNCC: 6 | RNVC: 9

16 Apr 1969

3040-00-119-2781
Shouldered Shaft

001192781
5153309: RNCC: 3 | RNVC: 2
5153309: RNCC: 5 | RNVC: 2
K-5153309: RNCC: 5 | RNVC: 2
5187353B: RNCC: 5 | RNVC: 9
5153309: RNCC: 5 | RNVC: 9
PC5153309: RNCC: 5 | RNVC: 9
K-5153309: RNCC: 5 | RNVC: 9
05153309: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-446-6039
Shaft Collar

004466039
10064813: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-097-4893
Rigid Connecting Link

000974893
8735505: RNCC: 3 | RNVC: 2
165457R11: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-442-5886
Remote Control Lever

004425886
11646860: RNCC: 3 | RNVC: 2

28 Mar 1969

3040-00-091-9610
Rigid Connecting Link

000919610
153332: RNCC: 3 | RNVC: 2
153332: RNCC: 5 | RNVC: 9
153332: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-091-9588
Remote Control Lever

000919588
153255: RNCC: 3 | RNVC: 2
153255: RNCC: 5 | RNVC: 9
153255: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-091-9582
Rigid Connecting Link

000919582
153174: RNCC: 3 | RNVC: 2
153174: RNCC: 5 | RNVC: 9
153174: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-089-8385
Control Cam

000898385
SMC619852: RNCC: 3 | RNVC: 2
117613-801: RNCC: 5 | RNVC: 2

27 Jul 1967

3040-00-089-7993
Rigid Connecting Link

000897993
SMB619902: RNCC: 3 | RNVC: 2
836552-1: RNCC: 5 | RNVC: 2

20 Jul 1967

3040-00-089-7990
Shaft Collar

000897990
SM-B-619873: RNCC: 3 | RNVC: 2
168656-1: RNCC: 5 | RNVC: 2

20 Jul 1967

3040-00-089-7779
Straight Shaft

000897779
5126120: RNCC: 3 | RNVC: 2

18 Jul 1967

3040-00-089-2365
Counterbalance Weight

000892365
5121969: RNCC: 3 | RNVC: 2

25 May 1967

3040-00-088-9379
Mechanical Drive Housing

000889379
10908707: RNCC: 3 | RNVC: 2

29 Apr 1972

3040-00-080-6562
Shouldered Shaft

000806562
5121073: RNCC: 3 | RNVC: 2
54886: RNCC: 5 | RNVC: 2
5121073: RNCC: 5 | RNVC: 9

8 Dec 1967

3040-00-076-3538
Remote Control Lever

000763538
149104: RNCC: 3 | RNVC: 2

29 Jul 1967

3040-00-075-2619
Manual Control Lever

000752619
176647: RNCC: 3 | RNVC: 9
176647: RNCC: 5 | RNVC: 2
159958: RNCC: 5 | RNVC: 9
176647: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-075-1108
Linear Actuating Cylinder Piston

000751108
58434: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-072-8522
Manual Control Lever

000728522
179451: RNCC: 3 | RNVC: 2
179451: RNCC: 5 | RNVC: 2
179451: RNCC: 5 | RNVC: 9
179451: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-069-4149
Helical Gearshaft

000694149
1061106: RNCC: 3 | RNVC: 2

11 Jul 1967

3040-00-066-7949
Air Breather Assy

000667949
208-353: RNCC: 3 | RNVC: 2
10043943-40: RNCC: 7 | RNVC: 2

1 Jan 1963

3040-00-426-5254
Remote Control Lever

004265254
2585645: RNCC: 3 | RNVC: 2

16 Apr 1971

3040-00-064-6983
Linear Actuating Cylinder Assembly Parts Kit

000646983
233793: RNCC: 3 | RNVC: 2
1-233793: RNCC: 5 | RNVC: 2
1-233793: RNCC: 5 | RNVC: 9
0646983: RNCC: 5 | RNVC: 9
233793: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-063-2351
Ball Joint

000632351
14411-00: RNCC: 3 | RNVC: 2
205678A: RNCC: 5 | RNVC: 9
14411-00: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-061-7539
Straight Shaft

000617539
180488: RNCC: 3 | RNVC: 2

15 Jun 1967

3040-00-060-8518
Manual Control Lever

000608518
180667: RNCC: 3 | RNVC: 2
180667: RNCC: 5 | RNVC: 9

13 Jun 1967

3040-00-060-8519
Manual Control Lever

000608519
180668: RNCC: 3 | RNVC: 2
180668: RNCC: 5 | RNVC: 9

13 Jun 1967

3040-00-057-5255
Shaft Collar

000575255
1941243: RNCC: 3 | RNVC: 2
1941243: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-420-9016
Mechanical Drive Housing

004209016
10908270: RNCC: 3 | RNVC: 2
2590004209016: RNCC: 5 | RNVC: 9
2590004209016: RNCC: 6 | RNVC: 9

12 Mar 1969

3040-00-055-4933
Shouldered Shaft

000554933
10925647: RNCC: 3 | RNVC: 2
3040000554933: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-055-1997
Shouldered Shaft

000551997
21795: RNCC: 3 | RNVC: 2

1 Jun 1967

3040-00-041-9836
Straight Shaft

000419836
S2024917: RNCC: 3 | RNVC: 2
2024917: RNCC: 3 | RNVC: 2
2024917: RNCC: 5 | RNVC: 9
S2024917: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-411-8356
Rigid Connecting Link

004118356
11634115: RNCC: 3 | RNVC: 2
3040004118356: RNCC: 6 | RNVC: 9

25 Aug 1969

3040-00-021-4868
Spur Gearshaft

000214868
544-8452-002: RNCC: 3 | RNVC: 2
544-8452-002: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-00-021-4849
Antenna Couplin Cam

000214849
544-8583-002: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-021-4760
Actuator Shaft

000214760
544-8068-003: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-021-3497
Straight Shaft

000213497
427133: RNCC: 3 | RNVC: 2
10885738: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-00-021-1912
Rigid Connecting Link

000211912
163787: RNCC: 3 | RNVC: 2
163787: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-021-1846
Manual Control Lever

000211846
031001001: RNCC: 3 | RNVC: 9
E47966: RNCC: 5 | RNVC: 9
47966: RNCC: 5 | RNVC: 9
E047966: RNCC: 5 | RNVC: 9
E30590: RNCC: 5 | RNVC: 9

27 Apr 1967

3040-00-021-0813
Control Cam

000210813
154389: RNCC: 3 | RNVC: 2
154389: RNCC: 5 | RNVC: 9
154389: RNCC: 5 | RNVC: 9
154389: RNCC: 5 | RNVC: 9
150204: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-021-0809
Rigid Connecting Link

000210809
154356: RNCC: 3 | RNVC: 2
154356: RNCC: 5 | RNVC: 9
154356: RNCC: 5 | RNVC: 9
154356: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-407-6773
Control Cam

004076773
11633924: RNCC: 3 | RNVC: 2

2 Jul 1970

3040-00-018-9608
Shouldered Shaft

000189608
A15HS020-5: RNCC: 3 | RNVC: 2
5890-1: RNCC: 5 | RNVC: 9

10 May 1968

3040-00-018-8632
Extension Shaft

000188632
SMC597970: RNCC: 3 | RNVC: 2
SMC597970: RNCC: 5 | RNVC: 9

10 May 1968

3040-00-015-3731
Straight Shaft

000153731
F400M00279: RNCC: 3 | RNVC: 9
82218: RNCC: 5 | RNVC: 2
74909828: RNCC: 5 | RNVC: 2
891322: RNCC: 5 | RNVC: 9
000-100-1654: RNCC: 5 | RNVC: 9
F400M279: RNCC: 5 | RNVC: 9
CTF400M279: RNCC: 5 | RNVC: 9
000-100-1654: RNCC: C | RNVC: 1

20 Apr 1967

3040-00-015-2188
Counterbalance Weight

000152188
6844615D: RNCC: 3 | RNVC: 2
6844615: RNCC: 5 | RNVC: 2
6844615: RNCC: 5 | RNVC: 9
6844615: RNCC: C | RNVC: 1

1 Jan 1961

3040-00-014-2049
Multiple Gears Gearshaft

000142049
NYLC269: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-013-7351
Shaft Retaining Plate

000137351
N8-42: RNCC: 3 | RNVC: 2

14 Feb 1968

3040-00-012-4810
Shouldered Shaft

000124810
5110799: RNCC: 3 | RNVC: 2
5110799: RNCC: 5 | RNVC: 9
K-5110799: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-011-8536
Shaft Retaining Plate

000118536
9080842: RNCC: 3 | RNVC: 2
9080842: RNCC: 5 | RNVC: 1

18 Apr 1967

3040-00-011-2446
Hub Clamp

000112446
803024-1: RNCC: 3 | RNVC: 2
803024-1: RNCC: 5 | RNVC: 9

18 Apr 1967

3040-00-402-9800
Shaft Collar

004029800
1028604-6: RNCC: 3 | RNVC: 2
45-003-6: RNCC: 5 | RNVC: 2
1028604-6: RNCC: C | RNVC: 1

10 Jun 1970

3040-00-402-9799
Shaft Collar

004029799
1770737: RNCC: 3 | RNVC: 2
41-678: RNCC: 5 | RNVC: 2
1770737: RNCC: C | RNVC: 1

10 Jun 1970

3040-00-009-0875
Shouldered Shaft

000090875
69-4711: RNCC: 3 | RNVC: 2
009-0875: RNCC: 5 | RNVC: 2

28 Jul 1972

3040-00-008-7383
Linear Actuating Cylinder Assembly Parts Kit

000087383
74906392: RNCC: 3 | RNVC: 2
74906392-8: RNCC: 5 | RNVC: 2
BJI74906392-8: RNCC: 5 | RNVC: 2

19 Jul 1972

3040-00-007-4009
Rigid Connecting Link

000074009
324223: RNCC: 3 | RNVC: 2
324223: RNCC: 5 | RNVC: 9

30 Jun 1972

3040-00-006-6235
Threaded Shaft

000066235
4390655: RNCC: 3 | RNVC: 2

21 Jun 1972

3040-00-005-5094
Mechanical Drive Housing

000055094
11662046: RNCC: 3 | RNVC: 2
D29-005585: RNCC: 5 | RNVC: 2

16 Jun 1972

3040-00-005-1756
Manual Control Lever

000051756
194966: RNCC: 3 | RNVC: 2
194966: RNCC: 5 | RNVC: 9

7 Jun 1972

3040-00-004-4542
Manual Control Lever

000044542
7616BR: RNCC: 3 | RNVC: 2

27 May 1972

3040-00-003-3093
Rigid Connecting Link

000033093
11643090: RNCC: 3 | RNVC: 2

24 May 1972

3040-00-003-0964
Turbocharger Shaft

000030964
4060010: RNCC: 3 | RNVC: 2

13 May 1972

3040-00-001-7830
Speedometer-Tachometer Drive Adapter

000017830
4397159: RNCC: 3 | RNVC: 2
CC-1010 1.000: RNCC: 5 | RNVC: 2
4389858: RNCC: 5 | RNVC: 2
CC-1010: RNCC: 5 | RNVC: 9
CC1010-1-1: RNCC: 5 | RNVC: 9
CC1010-1-1: RNCC: 5 | RNVC: 9

27 Sep 1972

3040-00-001-7763
Straight Shaft

000017763
2391329: RNCC: 3 | RNVC: 2
2391329: RNCC: 3 | RNVC: 9

27 Sep 1972

3040-00-001-7762
Idler Shaft

000017762
2391325-1: RNCC: 3 | RNVC: 2
2391325-1: RNCC: 3 | RNVC: 9
2391325-1: RNCC: 5 | RNVC: 2
2391325: RNCC: C | RNVC: 1

27 Sep 1972

3040-00-001-2341
Straight Shaft

000012341
659380: RNCC: 3 | RNVC: 2

24 Sep 1972

3040-00-001-2320
Straight Shaft

000012320
659194: RNCC: 3 | RNVC: 2

24 Sep 1972

3040-00-393-1910
Manual Control Lever

003931910
SC-B-70401: RNCC: 3 | RNVC: 2
52454: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-392-7941
Control Cam

003927941
SC-B-136109: RNCC: 3 | RNVC: 2
GB424: RNCC: 5 | RNVC: 2
GB424: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-392-6584
Shouldered Shaft

003926584
504-7517-002: RNCC: 3 | RNVC: 2
504-7517-002: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-389-8174
Shaft Collar

003898174
7188897: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-388-9574
Shaft Collar

003889574
8020871: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-383-6744
Shouldered Shaft

003836744
737124: RNCC: 3 | RNVC: 9
737124: RNCC: 5 | RNVC: 9
NH6688PC431: RNCC: 5 | RNVC: 9
NH7407PC431: RNCC: 5 | RNVC: 9
431NC6107: RNCC: 5 | RNVC: 9
431NC6107: RNCC: 5 | RNVC: 9
NH6688PC431: RNCC: 5 | RNVC: 9
NH7407PC431: RNCC: 5 | RNVC: 9
431NC6107: RNCC: C | RNVC: 1
737124: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-382-9835
Pawl

003829835
504-7567-003: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-371-4106
Shaft Collar

003714106
A18024: RNCC: 3 | RNVC: 9
8687063: RNCC: 5 | RNVC: 2
8195-31-10: RNCC: 5 | RNVC: 2
A18024: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-369-0096
Shaft Collar

003690096
Y12: RNCC: 3 | RNVC: 2
5100-4700-470178ALT1PC72: RNCC: 3 | RNVC: 2
5100-4700-470171ALT2PC72: RNCC: 3 | RNVC: 2
4700-3168312REVBPC72: RNCC: 5 | RNVC: 2
5100-4700-470178ALT1PC72: RNCC: 5 | RNVC: 9
R236PC72: RNCC: 5 | RNVC: 9
N-11777: RNCC: 5 | RNVC: 9
4700-3168312REVBPC72: RNCC: 5 | RNVC: 9
5100-4700-470171ALT2PC72: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-356-6892
Shaft Collar

003566892
SM-B-338606: RNCC: 3 | RNVC: 2
11547P5: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-356-3507
Manual Control Lever

003563507
SC-B-69987: RNCC: 3 | RNVC: 2
506LX: RNCC: 5 | RNVC: 2
11518: RNCC: 5 | RNVC: 9
51567: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-356-3474
Manual Control Lever

003563474
SC-B-69489: RNCC: 3 | RNVC: 2
51068: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-356-3356
Control Cam

003563356
50536: RNCC: 3 | RNVC: 9
SC-B-69704: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-356-3310
Control Cam

003563310
SM-C-148339: RNCC: 3 | RNVC: 2
50364A: RNCC: 5 | RNVC: 9
50364: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-356-3275
Pawl

003563275
SC-B-70098: RNCC: 3 | RNVC: 2
5018-260: RNCC: 5 | RNVC: 2
50165: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-346-8240
Control Cam

003468240
8585369: RNCC: 3 | RNVC: 2
1220003468240: RNCC: 5 | RNVC: 9
1220003468240: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-346-7698
Shaft Collar

003467698
7666401: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-346-2303
Shaft Collar

003462303
64A81B75-1: RNCC: 3 | RNVC: 2
458098-1: RNCC: C | RNVC: 1

20 Jan 1974

3040-00-343-5283
Rigid Connecting Link

003435283
211708: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-339-2484
Shaft Collar

003392484
S4501H3131241REVBPC41: RNCC: 3 | RNVC: 2
SG2876PC41: RNCC: 5 | RNVC: 2
S4501H3131241REVBPC41: RNCC: 5 | RNVC: 9
SG2876PC41: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-339-1780
Shaft Collar

003391780
7591459: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-330-5558
Shaft Collar

003305558
8200277: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-327-5199
Linear Actuating Cylinder Assembly Parts Kit

003275199
1310: RNCC: 3 | RNVC: 2
1310: RNCC: 3 | RNVC: 9

28 Nov 1973

3040-00-323-7322
Shaft Collar

003237322
SMB187690: RNCC: 3 | RNVC: 2
56246: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-314-9116
Rigid Connecting Link

003149116
6-73382: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-301-7388
Bell Crank

003017388
7345832: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-300-4577
Shaft Collar

003004577
4 3-8 3722-16: RNCC: 3 | RNVC: 2
463722PC16: RNCC: 3 | RNVC: 2
463722PC3: RNCC: 5 | RNVC: 9
4 3-8 3722-3: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-294-9983
Shaft Collar

002949983
34-237: RNCC: 3 | RNVC: 2
57-3039: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-294-5706
Shaft Collar

002945706
510544PC5: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-294-5705
Shaft Collar

002945705
510544PC6: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-288-0810
Bell Crank

002880810
1285047-113: RNCC: 3 | RNVC: 2

14 Sep 1973

3040-00-281-9434
Bell Crank

002819434
50-1506-3: RNCC: 3 | RNVC: 2
50-1506-3: RNCC: 5 | RNVC: 9

25 Aug 1973

3040-00-262-9270
Shouldered Shaft

002629270
3227-3043-0: RNCC: 3 | RNVC: 2
00019010: RNCC: 5 | RNVC: 9
100190: RNCC: 5 | RNVC: 9
1FC249: RNCC: 5 | RNVC: 9
1FC249: RNCC: C | RNVC: 1

13 Jul 1973

3040-00-256-2778
Shaft Collar

002562778
149497PC5: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-254-4911
Shaft Collar

002544911
SCB69522-1: RNCC: 3 | RNVC: 2
50391: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-251-2168
Shaft Collar

002512168
149497PC6: RNCC: 3 | RNVC: 2
149497-6: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-248-9032
Shaft Collar

002489032
467752: RNCC: 3 | RNVC: 2

7 Nov 1969

3040-00-248-9030
Shaft Collar

002489030
467751: RNCC: 3 | RNVC: 2
467751: RNCC: 5 | RNVC: 9
467751: RNCC: 5 | RNVC: 9

7 Nov 1969

3040-00-248-9029
Shaft Collar

002489029
467748: RNCC: 3 | RNVC: 2
467748: RNCC: 5 | RNVC: 9

7 Nov 1969

3040-00-248-4726
Rigid Connecting Link

002484726
11647351: RNCC: 3 | RNVC: 2

7 Nov 1969

3040-00-245-6785
Shaft Collar

002456785
193438PC8: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-245-6791
Shaft Collar

002456791
325261PC4: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-242-8893
Shaft Collar

002428893
177947PC8: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-240-0188
Shaft Collar

002400188
SCB69496: RNCC: 3 | RNVC: 2
50149: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-235-4362
Remote Control Lever

002354362
7413944: RNCC: 3 | RNVC: 2

25 Jun 1969

3040-00-228-3732
Straight Shaft

002283732
5143146: RNCC: 3 | RNVC: 2
PC5143146: RNCC: 5 | RNVC: 9
K-5143146: RNCC: 5 | RNVC: 9

11 May 1973

3040-00-180-8913
Electric Tachometer Shaft

001808913
551G29: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-176-5764
Shaft Collar

001765764
8B1369: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-163-9107
Shaft Collar

001639107
1201565P1: RNCC: 3 | RNVC: 2

7 Feb 1973

3040-00-162-9678
Shaft Collar

001629678
065-09573-000: RNCC: 3 | RNVC: 2
065-09573: RNCC: 5 | RNVC: 9
65-9573P: RNCC: 5 | RNVC: 9
065-09573L: RNCC: 5 | RNVC: 9
065-09573L: RNCC: C | RNVC: 1
065-09573L: RNCC: C | RNVC: 1

5 Nov 1971

3040-00-162-2862
Piston Ring

001622862
M1904AS: RNCC: 3 | RNVC: 2
M1904AA TO M1904AZ: RNCC: D | RNVC: 9

27 Oct 1971

3040-00-157-1634
Shaft Collar

001571634
417744PC2: RNCC: 3 | RNVC: 2
233005: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-132-5077
Thrust Bearing Shoe

001325077
13 1 2 5045 4: RNCC: 3 | RNVC: 2
13 1-2-5045-4: RNCC: 3 | RNVC: 2
13 1-2 5045-4: RNCC: 3 | RNVC: 2
465075PC4T08: RNCC: 5 | RNVC: 2
465045PC4: RNCC: 5 | RNVC: 2
652A975PC128: RNCC: 5 | RNVC: 2
652A975-128: RNCC: 5 | RNVC: 9
652A975-128: RNCC: 5 | RNVC: 9
652A975-128: RNCC: C | RNVC: 1

18 Dec 1968

3040-00-125-8228
Pawl

001258228
74097: RNCC: 3 | RNVC: 2
74097: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-120-0418
Linear Actuating Cylinder Piston

001200418
11643812: RNCC: 3 | RNVC: 2

21 Oct 1968

3040-00-105-6177
Rigid Connecting Link

001056177
11589182: RNCC: 3 | RNVC: 2

3 Jul 1968

3040-00-103-8099
Idler Gear Shaft

001038099
13206E0144: RNCC: 3 | RNVC: 2
ERL235: RNCC: 5 | RNVC: 9
ERL235: RNCC: 5 | RNVC: 9

14 Jun 1968

3040-00-102-8827
Shouldered Shaft Assembly

001028827
64A98C365-1: RNCC: 3 | RNVC: 2
64A98C365-1: RNCC: 5 | RNVC: 2

3 Jun 1968

3040-00-089-2553
Shaft Collar

000892553
1382647: RNCC: 3 | RNVC: 2
1382647: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-083-1277
Shouldered Shaft

000831277
51827: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-081-9972
Straight Shaft

000819972
10949976: RNCC: 3 | RNVC: 2
2520000819972: RNCC: 5 | RNVC: 9
2520000819972: RNCC: 6 | RNVC: 9

13 Dec 1967

3040-00-080-8138
Shouldered Shaft

000808138
BUWEPSDWG1653550: RNCC: 3 | RNVC: 2
1653550: RNCC: 3 | RNVC: 2
BUWEPSDWG1653550: RNCC: 5 | RNVC: 9

8 Dec 1967

3040-00-074-0337
Rigid Connecting Link

000740337
2412548: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-072-1088
Test Stand Pawl

000721088
1785181: RNCC: 3 | RNVC: 2

22 Jul 1967

3040-00-071-8359
Test Stand Brake

000718359
1653547-2: RNCC: 3 | RNVC: 2

20 Jul 1967

3040-00-068-9806
Shaft Collar

000689806
2205973G1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-060-6180
Shaft Collar

000606180
4-18: RNCC: 3 | RNVC: 9
4-18: RNCC: 5 | RNVC: 9

10 Jun 1967

3040-00-059-4321
Shaft Collar

000594321
504-003: RNCC: 3 | RNVC: 2

17 Jun 1967

3040-00-059-4320
Shaft Collar

000594320
504-002: RNCC: 3 | RNVC: 2

13 Jun 1967

3040-00-057-0461
Shaft Collar

000570461
504-007: RNCC: 3 | RNVC: 2

6 Jun 1967

3040-00-057-0448
Shaft Collar

000570448
504-008: RNCC: 3 | RNVC: 2

6 Jun 1967

3040-00-057-0446
Shaft Collar

000570446
504-009: RNCC: 3 | RNVC: 2

6 Jun 1967

3040-00-056-2417
Counterbalance Weight

000562417
942060: RNCC: 3 | RNVC: 9
A2511: RNCC: 5 | RNVC: 9
N68A2511: RNCC: 5 | RNVC: 9
942060: RNCC: 5 | RNVC: 9
NH7472PC68: RNCC: 5 | RNVC: 9
942060: RNCC: C | RNVC: 1
NH-7472: RNCC: D | RNVC: 9

1 Jan 1963

3040-00-052-0279
Shaft Collar

000520279
8616071: RNCC: 3 | RNVC: 2

16 May 1967

3040-00-043-0314
Shaft Collar

000430314
819472-2: RNCC: 3 | RNVC: 9

11 May 1967

3040-00-030-0433
Bell Crank

000300433
SM-B-148799: RNCC: 3 | RNVC: 2
53904: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-023-3453
Shaft Collar

000233453
504-004: RNCC: 3 | RNVC: 9

2 May 1967

3040-00-022-8524
Shaft Collar

000228524
871519: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-019-5175
Brake Drum

000195175
9977320: RNCC: 3 | RNVC: 2
1913: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-009-7588
Shaft Collar

000097588
A51H30518-11: RNCC: 3 | RNVC: 2
A51H30518-11: RNCC: 3 | RNVC: 9
A51H30518-11: RNCC: 5 | RNVC: 2
A51H30518-11: RNCC: 5 | RNVC: 9

9 Aug 1972

3040-00-008-6163
Flexible Drive Shaft

000086163
42252D39: RNCC: 3 | RNVC: 2
H142252-39WG: RNCC: 5 | RNVC: 9

23 Jul 1972

3040-00-007-1466
Shaft Collar

000071466
472P011C023-7: RNCC: 3 | RNVC: 9

6 Jul 1972

3040-01-667-1355
Straight Shaft

016671355
3890AS004356-01: RNCC: 3 | RNVC: 2
3890AS004356-01: RNCC: 5 | RNVC: 9
3890AS004356: RNCC: D | RNVC: 9

4 Oct 2017

3040-01-686-4565
Shaft And Tube Support Assembly

016864565
106202-101: RNCC: 3 | RNVC: 2

14 Feb 2020

3040-01-664-6357
Control Cam

016646357
8M0033987: RNCC: 3 | RNVC: 2

28 Jun 2017

3040-01-672-5461
Rigid Connecting Link

016725461
12624380: RNCC: 3 | RNVC: 2

8 May 2018

3040-01-663-2741
Mechanically Actuated Spindle

016632741
32-3800: RNCC: 3 | RNVC: 2

3 May 2017

3040-01-663-2738
Mechanically Actuated Spindle

016632738
31-3800: RNCC: 3 | RNVC: 2

3 May 2017

3040-01-669-0736
Manual Control Lever

016690736
1330-1601-10: RNCC: 3 | RNVC: 2
1330-1601: RNCC: D | RNVC: 9

20 Dec 2017

3040-01-672-5483
Rigid Connecting Link

016725483
12624381: RNCC: 3 | RNVC: 2

8 May 2018

3040-01-642-9232
Shouldered Shaft

016429232
3113J39-1: RNCC: 3 | RNVC: 2
3113J39-1: RNCC: 3 | RNVC: 9
873E192 ITEM 64: RNCC: 5 | RNVC: 1
3113J39 PIECE 1: RNCC: 5 | RNVC: 9
3113J39-1: RNCC: 5 | RNVC: 9

13 Mar 2015

3040-01-535-8319
Straight Shaft

015358319
387 6974-825: RNCC: 3 | RNVC: 2

13 Dec 2005

3040-01-589-6745
Nonaircraft Mechanical Actuator

015896745
RD-5-7999-1: RNCC: 3 | RNVC: 2
RD-3-9379: RNCC: D | RNVC: 9

2 Nov 2010

3040-01-526-2978
Shouldered Shaft

015262978
925369-1: RNCC: 3 | RNVC: 2
925369-1: RNCC: 5 | RNVC: 2
925369-1: RNCC: 5 | RNVC: 2

14 Dec 2004

3040-01-546-0761
Hydraulic Accumulator

015460761
5500500: RNCC: 3 | RNVC: 2

6 Dec 2006

3040-01-593-1038
Shouldered Shaft

015931038
7548105-32: RNCC: 3 | RNVC: 2

4 Apr 2011

3040-01-589-5478
Steering Stop

015895478
1600904-6RC: RNCC: 3 | RNVC: 2

29 Oct 2010

3040-01-533-5587
Brake Disc

015335587
11450158-4: RNCC: 3 | RNVC: 2
11450158-3: RNCC: 5 | RNVC: 9

20 Sep 2005

3040-01-568-9766
Straight Shaft

015689766
T204924: RNCC: 3 | RNVC: 2

17 Nov 2008

3040-01-565-1401
Linear Actuating Cylinder Assembly

015651401
3708568: RNCC: 3 | RNVC: 2

14 Jul 2008

3040-01-589-8296
Shouldered Shaft

015898296
6445054-200M1: RNCC: 3 | RNVC: 2
6445054-200M1: RNCC: 3 | RNVC: 2
6445054-200M1: RNCC: 3 | RNVC: 9
6445054-200M1: RNCC: 5 | RNVC: 2

6 Nov 2010

3040-01-547-7518
Straight Shaft

015477518
F050361: RNCC: 3 | RNVC: 2
F050113 PIECE 48: RNCC: 5 | RNVC: 2

31 Jan 2007

3040-01-613-9709
Mechanically Actuated Spindle

016139709
310312040H: RNCC: 3 | RNVC: 2
310312040H: RNCC: 3 | RNVC: 9

20 Nov 2012

3040-01-551-8699
Remote Control Lever

015518699
12446233-1: RNCC: 3 | RNVC: 2

30 May 2007

3040-01-518-7635
Shoe Type Brake

015187635
190CF SPECIAL: RNCC: 3 | RNVC: 2
190CF SPECIAL: RNCC: 5 | RNVC: 9

23 Mar 2004

3040-01-522-2676
Push-Pull Control Assembly

015222676
4602BG4-133B: RNCC: 3 | RNVC: 2
4602BG4-133: RNCC: 5 | RNVC: 2
1588 ITEM 45: RNCC: 5 | RNVC: 9
1588 ITEM 45: RNCC: C | RNVC: 1

26 Jul 2004

3040-01-497-6333
Linear Actuating Cylinder Piston

014976333
1354570000: RNCC: 3 | RNVC: 2
9HE955: RNCC: 5 | RNVC: 2
9HE955: RNCC: 5 | RNVC: 9
BB200074A0: RNCC: D | RNVC: 9

29 May 2002

3040-01-512-5710
Detent Plate

015125710
AFS0200-115-000: RNCC: 3 | RNVC: 2
A9876 ITEM 7: RNCC: 5 | RNVC: 2

4 Sep 2003

3040-01-418-4549
Shoe Type Brake

014184549
5363416: RNCC: 3 | RNVC: 2
5363361 PC 130: RNCC: 5 | RNVC: 2

28 Aug 1995

3040-01-432-6546
Inertia Damper

014326546
23-020196-MOD-6: RNCC: 3 | RNVC: 2
B400-699.006: RNCC: 5 | RNVC: 2
B400-699.006: RNCC: 5 | RNVC: 9
23-020196-MOD: RNCC: D | RNVC: 9

11 Jun 1996

3040-01-416-6893
Disc Brake Caliper

014166893
46296D1654-1: RNCC: 3 | RNVC: 2
46296D1654: RNCC: 3 | RNVC: 9

24 Jul 1995

3040-01-365-1888
Belt-Chain Tension Adjusting Device

013651888
1501121-05: RNCC: 3 | RNVC: 2
10107278: RNCC: 6 | RNVC: 9

2 Oct 1992

3040-01-331-8761
Shaft Collar

013318761
62709 ITEM 10: RNCC: 3 | RNVC: 2
6975-032: RNCC: 5 | RNVC: 2
62709: RNCC: D | RNVC: 9

29 Dec 1990

3040-01-377-4222
Push-Pull Control Assembly

013774222
D-43820-003-60.0: RNCC: 3 | RNVC: 9
3020-075-0152 AND 3021100-075: RNCC: 5 | RNVC: 2
D5540-545-09: RNCC: 5 | RNVC: 2
43820-003-60: RNCC: 5 | RNVC: 9
D-43820-003-60.0: RNCC: 5 | RNVC: 9
43820-003-60: RNCC: 5 | RNVC: 9
1034-B287: RNCC: D | RNVC: 9

15 Jul 1993

3040-01-370-5488
Linear Actuating Cylinder Assembly

013705488
SP-8660: RNCC: 3 | RNVC: 2

24 Jan 1993

3040-01-338-2412
Linear Actuating Cylinder Assembly

013382412
TL15HAXX3AAAK137: RNCC: 3 | RNVC: 2
TL15HACX3AAG8356: RNCC: 5 | RNVC: 9
TL15HACX3AAAK137: RNCC: 5 | RNVC: 9
G8356: RNCC: 5 | RNVC: 9

28 Apr 1991

3040-01-368-1354
Linear Actuating Cylinder Piston

013681354
8-C2830: RNCC: 3 | RNVC: 2
8-C2126: RNCC: 5 | RNVC: 9
C2126: RNCC: 5 | RNVC: 9

26 Nov 1992

3040-01-317-3625
Shaft Idler

013173625
2-418-008-352-40: RNCC: 3 | RNVC: 2
LM4-1462-5531-001 PIECE 11: RNCC: 5 | RNVC: 2

29 Mar 1990

3040-01-268-9953
Control Cam

012689953
5906149: RNCC: 3 | RNVC: 2
5906149: RNCC: 5 | RNVC: 2

10 Dec 1987

3040-01-298-8933
Shouldered Shaft

012988933
10029099: RNCC: 3 | RNVC: 2

23 Apr 1989

3040-01-312-1353
Linear Actuating Cylinder Piston Rod

013121353
11043346: RNCC: 3 | RNVC: 2
11043346: RNCC: 3 | RNVC: 9
11043346: RNCC: 5 | RNVC: 9
11024973: RNCC: 5 | RNVC: 9

12 Dec 1989

3040-01-312-4513
Rigid Connecting Link

013124513
18170: RNCC: 3 | RNVC: 2

15 Dec 1989

3040-01-313-2047
Single Disk Brake

013132047
BK55-06: RNCC: 3 | RNVC: 2
BK55-04: RNCC: 5 | RNVC: 9
25400192: RNCC: D | RNVC: 9

3 Jan 1990

3040-01-267-1392
Shaft Retaining Plate

012671392
S1306KX1: RNCC: 3 | RNVC: 2
SE10942-007: RNCC: 5 | RNVC: 9
SF10942: RNCC: D | RNVC: 9

5 Nov 1987

3040-01-203-8716
Shouldered Shaft

012038716
1027761: RNCC: 3 | RNVC: 2
7408185: RNCC: 5 | RNVC: 9
4933-3B: RNCC: 5 | RNVC: 9
740B185: RNCC: 5 | RNVC: 9
870BA: RNCC: D | RNVC: 9

20 Mar 1985

3040-01-265-2640
Linear Actuating Cylinder Piston Rod

012652640
D84233 PIECE 39: RNCC: 3 | RNVC: 2
D84233 PIECE 39: RNCC: 3 | RNVC: 9
D84233: RNCC: D | RNVC: 9

11 Oct 1987

3040-01-264-9496
Linear Actuating Cylinder Assembly Parts Kit

012649496
N5-660-11: RNCC: 3 | RNVC: 2
83140-2 PC 20: RNCC: C | RNVC: 1

8 Oct 1987

3040-01-220-9318
Linear Actuating Cylinder Assembly

012209318
AK154125E0: RNCC: 3 | RNVC: 2

21 Nov 1985

3040-01-218-0354
Nonrotating Shaft Eye Bracket

012180354
7720047-1: RNCC: 3 | RNVC: 9
7720047-1: RNCC: 5 | RNVC: 9

6 Oct 1985

3040-01-194-0077
Shouldered Shaft

011940077
23210552: RNCC: 3 | RNVC: 2
23210552: RNCC: 3 | RNVC: 9

9 Nov 1984

3040-01-152-9270
Pneumatic Actuator Cylinder Housing

011529270
CB29086X01-001: RNCC: 3 | RNVC: 2
170-28955 ITEM 1: RNCC: 5 | RNVC: 2
28954: RNCC: 5 | RNVC: 9
C29086X01-001: RNCC: 5 | RNVC: 9
CB29086-001: RNCC: 5 | RNVC: 9
170-28955: RNCC: D | RNVC: 9

10 May 1983

3040-01-180-0785
Shouldered Shaft

011800785
22001-2: RNCC: 3 | RNVC: 2
22001-1: RNCC: E | RNVC: 8

24 May 1984

3040-01-200-4315
Shouldered Shaft

012004315
7-0038-01: RNCC: 3 | RNVC: 2
NF12313-000: RNCC: 5 | RNVC: 9
0CA14354 PIECE 7: RNCC: 5 | RNVC: 9
NF12313: RNCC: C | RNVC: 1

4 Feb 1985

3040-01-067-7976
Brake Shoe

010677976
73L-31A-410: RNCC: 3 | RNVC: 2
73L-31A-410: RNCC: 5 | RNVC: 9
73L31 410: RNCC: 5 | RNVC: 9
73-31A-410: RNCC: 5 | RNVC: 9
73L-31-310: RNCC: 5 | RNVC: 9
314464-154: RNCC: 5 | RNVC: 9
4334-5010: RNCC: 5 | RNVC: 9
73-31-410L: RNCC: 5 | RNVC: 9
73L-0-410VR PC 73L-31A-410: RNCC: 5 | RNVC: 9
73L-31A-410: RNCC: 5 | RNVC: 9

8 Nov 1978

3040-00-943-4874
Tensioner Shaft

009434874
413270-1: RNCC: 3 | RNVC: 2

28 Jan 1966

3040-00-734-5290
Mechanical Drive Housing

007345290
8351709: RNCC: 3 | RNVC: 2
3040007345290: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-625-8555
Rigid Connecting Link

006258555
374538-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-566-1225
Cylinder Support

005661225
606231-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-192-7550
Strap Assembly

001927550
21050-800: RNCC: 3 | RNVC: 2

11 Mar 1973

3040-00-127-8412
Shouldered Shaft

001278412
698452-1: RNCC: 3 | RNVC: 2
698452-1: RNCC: 3 | RNVC: 2

27 Nov 1968

3040-00-272-7824
Shouldered Shaft

002727824
139C6473: RNCC: 3 | RNVC: 2

30 Jul 1973

3040-00-329-1072
L Cylinder Assembly

003291072
VMC0800-101: RNCC: 3 | RNVC: 2
VMC0800-101: RNCC: 3 | RNVC: 9
VMC0800-101: RNCC: 5 | RNVC: 9
7545920-10: RNCC: 5 | RNVC: 9

3 Dec 1973

3040-00-321-3943
Spur Gearshaft

003213943
366486-1: RNCC: 3 | RNVC: 2
CEC68466B: RNCC: 5 | RNVC: 2
CEC68466B: RNCC: 5 | RNVC: 2

18 Nov 1973

3040-01-595-6796
Ball Joint

015956796
DV1745-021: RNCC: 3 | RNVC: 2

4 May 2011

3040-01-548-5766
Flexible Drive Shaft

015485766
58566-02: RNCC: 3 | RNVC: 2
501-7066642-58: RNCC: 5 | RNVC: 1
H525-7604-58: RNCC: 5 | RNVC: 1
7066642: RNCC: D | RNVC: 9

27 Feb 2007

3040-01-555-7507
Shouldered Shaft

015557507
8214490-69: RNCC: 3 | RNVC: 2

12 Sep 2007

3040-01-482-7938
Brake Shoe Set

014827938
6-3753-1X2: RNCC: 3 | RNVC: 2
473753PN1,2: RNCC: 5 | RNVC: 2
473753: RNCC: D | RNVC: 9

5 Mar 2001

3040-01-483-3080
Clutch Torsion Bar

014833080
12593111: RNCC: 3 | RNVC: 2

23 Mar 2001

3040-01-482-9983
Brake Shoe Set

014829983
K098123: RNCC: 3 | RNVC: 2
808331: RNCC: 5 | RNVC: 9
314148: RNCC: 5 | RNVC: 9

13 Mar 2001

3040-01-501-2402
Gag Device Muzz Dr

015012402
751-6402881-AY99: RNCC: 3 | RNVC: 2
211091396: RNCC: 5 | RNVC: 1
751-6405237-REF 97: RNCC: 5 | RNVC: 2
6402881: RNCC: D | RNVC: 9

26 Sep 2002

3040-01-457-9329
Manual Control Lever Assembly

014579329
9HR296: RNCC: 3 | RNVC: 2
13230E5450: RNCC: 5 | RNVC: 2
9HR296: RNCC: 5 | RNVC: 9

7 Aug 1998

3040-01-450-2030
Differential Spider

014502030
130-4743: RNCC: 3 | RNVC: 2
131-2510 ITEM 12: RNCC: 5 | RNVC: 9
131-2510: RNCC: D | RNVC: 9

30 Oct 1997

3040-01-460-0986
Manual Control Lever

014600986
12466642: RNCC: 3 | RNVC: 2

27 Oct 1998

3040-01-376-0004
Linear Actuating Cylinder Assembly

013760004
1378AS290-2: RNCC: 3 | RNVC: 2
A-82002: RNCC: 3 | RNVC: 9
1378AS290-2: RNCC: 7 | RNVC: 2

24 May 1993

3040-01-341-6234
Counterbalance Weight

013416234
4070419CL3: RNCC: 3 | RNVC: 2

3 Jul 1991

3040-01-336-5007
Bellcrank Assembly

013365007
205-801-007-101: RNCC: 3 | RNVC: 2

31 Jan 2012

3040-01-319-6011
Rigid Connecting Link

013196011
1534AS134: RNCC: 3 | RNVC: 2
C013458-1: RNCC: 3 | RNVC: 9
1534AS134: RNCC: 5 | RNVC: 2
10143554: RNCC: 6 | RNVC: 9

11 May 1990

3040-01-327-6000
Control Cam

013276000
2676472: RNCC: 3 | RNVC: 2

17 Oct 1990

3040-01-329-8325
Shouldered Shaft

013298325
2509299: RNCC: 3 | RNVC: 2

24 Nov 1990

3040-01-312-1354
Linear Actuating Cylinder Piston Rod

013121354
11043338: RNCC: 3 | RNVC: 2
11043338: RNCC: 3 | RNVC: 9
11043328: RNCC: 5 | RNVC: 9
11043338: RNCC: 5 | RNVC: 9
11024981: RNCC: 5 | RNVC: 9

12 Dec 1989

3040-01-221-3453
Linear Actuating Cylinder Assembly

012213453
AG154125A0: RNCC: 3 | RNVC: 2

28 Nov 1985

3040-01-203-4584
Brake Disc

012034584
25400130: RNCC: 3 | RNVC: 2

14 Mar 1985

3040-01-171-7855
Mechanical Drive Housing

011717855
7-311310260: RNCC: 3 | RNVC: 2
7-311310260: RNCC: 5 | RNVC: 9

13 Feb 1984

3040-01-187-2918
Shouldered Shaft

011872918
5006959: RNCC: 3 | RNVC: 2
5006959: RNCC: 5 | RNVC: 2

21 Aug 1984

3040-01-181-9097
Shouldered Shaft

011819097
7-317221123: RNCC: 3 | RNVC: 2
7-317221123: RNCC: 5 | RNVC: 9

17 Jun 1984

3040-01-135-1592
Bell Crank

011351592
74A410686-1008: RNCC: 3 | RNVC: 2
74A410686-1008: RNCC: 5 | RNVC: 2
74A410686-1008: RNCC: 5 | RNVC: 2
74A410686-1008: RNCC: 5 | RNVC: 2
74A410686-1008: RNCC: 5 | RNVC: 2
74A410686-1008: RNCC: 5 | RNVC: 2
74A410686-1008: RNCC: 5 | RNVC: 9
74A410686-1008: RNCC: 5 | RNVC: 9
74A410686-1008: RNCC: 5 | RNVC: 9
74A410686-1008: RNCC: 5 | RNVC: 9

18 Jul 1982

3040-01-149-0718
Hydraulic Accumulator

011490718
11665003: RNCC: 3 | RNVC: 2
3040011490718: RNCC: 6 | RNVC: 9

14 Mar 1983

3040-01-127-3487
Push-Pull Control Assembly

011273487
100692: RNCC: 3 | RNVC: 2
3228-5: RNCC: 5 | RNVC: 2
100692: RNCC: 5 | RNVC: 9

27 Feb 1982

3040-01-073-9904
Shouldered Shaft

010739904
8-52B26-3: RNCC: 3 | RNVC: 9
8-52T-06 ITEM 8: RNCC: 5 | RNVC: 9
8-52B-26-3: RNCC: 5 | RNVC: 9
8-52T06ITEM8: RNCC: 5 | RNVC: 9
8-52-440: RNCC: 5 | RNVC: 9
8-52-440: RNCC: C | RNVC: 1

24 Mar 1979

3040-01-059-9160
Push-Pull Control Assembly

010599160
30450: RNCC: 3 | RNVC: 2

3 May 1978

3040-01-034-5004
Rigid Connecting Link

010345004
204-70073-13: RNCC: 3 | RNVC: 2
204-70073-13: RNCC: 5 | RNVC: 2
204-70073-13: RNCC: 5 | RNVC: 2
204-70073-13: RNCC: 5 | RNVC: 2
204-70073-13: RNCC: 5 | RNVC: 2
204-70073-13: RNCC: 5 | RNVC: 2
204-70073-13: RNCC: 5 | RNVC: 2
204-70073-13: RNCC: 5 | RNVC: 2
204-70073-13: RNCC: 5 | RNVC: 2
204-70073-13: RNCC: 5 | RNVC: 2

26 Jan 1977

3040-00-706-4301
Shouldered Shaft

007064301
1919C12: RNCC: 3 | RNVC: 2
1721C12: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-854-0244
Shouldered Shaft

008540244
2481791: RNCC: 3 | RNVC: 2
2481791: RNCC: 3 | RNVC: 9
2481791: RNCC: 5 | RNVC: 9

11 Jan 1967

3040-00-774-2681
Flexible Shaft Assembly

007742681
152649-01: RNCC: 3 | RNVC: 2

15 Apr 1972

3040-00-396-5093
Counterbalance Weight

003965093
211146CL2: RNCC: 3 | RNVC: 2
211146CL2: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-613-6612
Bell Crank

006136612
7962129: RNCC: 3 | RNVC: 2
3040006136612: RNCC: 5 | RNVC: 9

8 Feb 1975

3040-01-295-1991
Shouldered Shaft

012951991
735664: RNCC: 3 | RNVC: 2
10107009: RNCC: 6 | RNVC: 9

2 Mar 1989

3040-01-022-4871
Straight Shaft

010224871
26216244-25: RNCC: 3 | RNVC: 9
26216244: RNCC: D | RNVC: 9

29 May 1976

NSN 3040-01-467-7228 014677228 CYLINDER,ACTUATING,LINEAR

3040-01-467-7228
Linear Actuating Cylinder

014677228
RC-158: RNCC: 3 | RNVC: 2
RC-A58: RNCC: 5 | RNVC: 9
809536-19: RNCC: 5 | RNVC: 9
809536019: RNCC: 5 | RNVC: 9
809536: RNCC: D | RNVC: 9

13 Sep 1999

NSN 3040-01-525-7328 015257328 CYLINDER ASSEMBLY,ACTUATING,LINEAR

3040-01-525-7328
Linear Actuating Cylinder Assembly

015257328
RC-152: RNCC: 3 | RNVC: 2

22 Nov 2004

NSN 3040-00-459-2981 004592981 HEAD,LINEAR ACTUATING CYLINDER

3040-00-459-2981
Linear Actuating Cylinder Head

004592981
4775: RNCC: 3 | RNVC: 9

12 Aug 1970

NSN 3040-01-196-7285 011967285 LEVER,REMOTE CONTROL

3040-01-196-7285
Remote Control Lever

011967285
62QS 323A: RNCC: 3 | RNVC: 2
K-500-CH-2499: RNCC: 5 | RNVC: 2

14 Dec 1984

NSN 3040-00-058-6895 000586895 SHAFT,SHOULDERED

3040-00-058-6895
Shouldered Shaft

000586895
5607-1: RNCC: 3 | RNVC: 9
5607-1: RNCC: 5 | RNVC: 9

6 Jun 1967

NSN 3040-01-529-2871 015292871 CAM,CONTROL

3040-01-529-2871
Control Cam

015292871
751-072502-35: RNCC: 3 | RNVC: 1
7072552-2: RNCC: 5 | RNVC: 2
H821-0502-35: RNCC: 5 | RNVC: 2

12 Apr 2005

NSN 3040-00-379-6067 003796067 SHAFT,SHOULDERED

3040-00-379-6067
Shouldered Shaft

003796067
510668PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

NSN 3040-01-290-5046 012905046 CYLINDER ASSEMBLY,ACTUATING,LINEAR

3040-01-290-5046
Linear Actuating Cylinder Assembly

012905046
RC-1012: RNCC: 3 | RNVC: 9

12 Dec 1988

NSN 3040-01-449-9708 014499708 PISTON,LINEAR ACTUATING CYLINDER

3040-01-449-9708
Linear Actuating Cylinder Piston

014499708
512-6404653-80: RNCC: 3 | RNVC: 2
512-6404652-33: RNCC: 5 | RNVC: 2
DF6503-175 FIND 80: RNCC: 5 | RNVC: 9
6404653: RNCC: D | RNVC: 9

22 Oct 1997

NSN 3040-01-024-0776 010240776 PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY

3040-01-024-0776
Linear Actuating Cylinder Assembly Parts Kit

010240776
A227252P: RNCC: 3 | RNVC: 2
82177F11: RNCC: 5 | RNVC: 9
821711F11: RNCC: 5 | RNVC: 9

4 Jul 1976

NSN 3040-01-346-4209 013464209 CYLINDER ASSEMBLY,ACTUATING,LINEAR

3040-01-346-4209
Linear Actuating Cylinder Assembly

013464209
BRC-46: RNCC: 3 | RNVC: 9
RCP55: RNCC: 5 | RNVC: 9
RCP55: RNCC: 5 | RNVC: 9

4 Oct 1991

NSN 3040-01-481-5047 014815047 CYLINDER ASSEMBLY,ACTUATING,LINEAR

3040-01-481-5047
Linear Actuating Cylinder Assembly

014815047
RC-1510: RNCC: 3 | RNVC: 9
RC-1510: RNCC: 5 | RNVC: 2

10 Jan 2001

NSN 3040-00-102-3022 001023022 GEARSHAFT,HELICAL

3040-00-102-3022
Helical Gearshaft

001023022
406638: RNCC: 3 | RNVC: 9
406638: RNCC: 5 | RNVC: 9

29 May 1968

NSN 3040-01-198-7595 011987595 ROD,PISTON,LINEAR ACTUATING CYLINDER

3040-01-198-7595
Linear Actuating Cylinder Piston Rod

011987595
6-768-001686: RNCC: 3 | RNVC: 2
2CD7171: RNCC: 5 | RNVC: 2
2CD717: RNCC: 5 | RNVC: 9
6-294-005440: RNCC: C | RNVC: 1

12 Jan 1985

NSN 3040-00-051-3833 000513833 CONNECTING LINK,RIGID

3040-00-051-3833
Rigid Connecting Link

000513833
300-310105-21: RNCC: 3 | RNVC: 9

4 Dec 1967

NSN 3040-00-459-6853 004596853 SHAFT,STRAIGHT

3040-00-459-6853
Straight Shaft

004596853
9183867: RNCC: 3 | RNVC: 9
9183867: RNCC: 5 | RNVC: 9

29 Dec 1969

NSN 3040-00-079-1204 000791204 SPIDER ASSEMBLY

3040-00-079-1204
Spider Assembly

000791204
3-65831: RNCC: 3 | RNVC: 2
114-4100: RNCC: 5 | RNVC: 9
114-4100: RNCC: 5 | RNVC: 9

4 Dec 1967

NSN 3040-00-409-8398 004098398 GEARSHAFT,SPUR

3040-00-409-8398
Spur Gearshaft

004098398
02261-0280-15: RNCC: 3 | RNVC: 2
40306: RNCC: 3 | RNVC: 9
65A81D944: RNCC: 5 | RNVC: 9
02261-0280-15: RNCC: 5 | RNVC: 9

22 Jul 1970

NSN 3040-00-073-8434 000738434 GEARSHAFT,HELICAL

3040-00-073-8434
Helical Gearshaft

000738434
3891S1319: RNCC: 3 | RNVC: 9
3891S1319: RNCC: 5 | RNVC: 2

1 Jan 1963

NSN 3040-00-476-4178 004764178 WIPER,CYLINDER,PLA

3040-00-476-4178
Pla Cylinder Wiper

004764178
6231-9: RNCC: 3 | RNVC: 9
6231-9: RNCC: C | RNVC: 1
AN6231-9: RNCC: C | RNVC: 1
16478: RNCC: C | RNVC: 1

4 Jun 1971

Load More Results