What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 155 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 155 of 300

3040-01-116-3484
Mechanical Drive Housing

011163484
4D2863: RNCC: 3 | RNVC: 2

25 Jul 1981

3040-01-116-1307
Straight Shaft

011161307
167C2210: RNCC: 3 | RNVC: 2
10106767: RNCC: 6 | RNVC: 9

21 Jul 1981

3040-01-116-0596
Rigid Connecting Link

011160596
4057969: RNCC: 3 | RNVC: 2
4057969: RNCC: 3 | RNVC: 9
4057969: RNCC: 5 | RNVC: 2
4057969: RNCC: 5 | RNVC: 2
4057969: RNCC: 5 | RNVC: 9

18 Jul 1981

3040-01-115-8173
Linear Actuating Cylinder Assembly

011158173
G101431: RNCC: 3 | RNVC: 9
HI-G101431: RNCC: 5 | RNVC: 2

15 Jul 1981

3040-01-115-8172
Linear Actuating Cylinder Assembly

011158172
G101430: RNCC: 3 | RNVC: 2

15 Jul 1981

3040-01-115-3813
Shouldered Shaft

011153813
12294094: RNCC: 1 | RNVC: 2
GTC713-00HA: RNCC: 3 | RNVC: 2
12294094: RNCC: 5 | RNVC: 9

4 Jul 1981

3040-01-115-2385
Shouldered Shaft

011152385
5150924: RNCC: 3 | RNVC: 2
K-5150924: RNCC: 5 | RNVC: 9

1 Jul 1981

3040-01-115-1406
Swing Arm

011151406
716-702003-7: RNCC: 3 | RNVC: 2
716-702003-7: RNCC: 3 | RNVC: 9
10153946: RNCC: 6 | RNVC: 9
716-702003-7: RNCC: C | RNVC: 1

28 Jun 1981

3040-01-114-3489
Straight Shaft

011143489
384-1105-00: RNCC: 3 | RNVC: 2

16 Jun 1981

3040-01-113-8333
Shouldered Shaft

011138333
12293313: RNCC: 3 | RNVC: 2
12293313: RNCC: 5 | RNVC: 9

5 Jun 1981

3040-01-113-6151
Control Cam

011136151
74A661126-1001: RNCC: 3 | RNVC: 2
10106758: RNCC: 6 | RNVC: 9

30 May 1981

3040-01-035-4442
Shouldered Shaft

010354442
11675389: RNCC: 3 | RNVC: 2
3040010354442: RNCC: 5 | RNVC: 9
3040010354442: RNCC: 6 | RNVC: 9

10 Feb 1977

3040-01-113-4554
Shouldered Shaft

011134554
32-0695-1: RNCC: 3 | RNVC: 2
32-0695: RNCC: D | RNVC: 9

27 May 1981

3040-01-113-3984
Shouldered Shaft

011133984
69-4553: RNCC: 3 | RNVC: 2

22 May 1981

3040-01-113-2811
Linear Actuating Cylinder Piston

011132811
C444008-A2: RNCC: 3 | RNVC: 9
D0HZ 3A544A: RNCC: 5 | RNVC: 9

20 May 1981

3040-01-113-2361
Shouldered Shaft

011132361
12293308: RNCC: 3 | RNVC: 2

19 May 1981

3040-01-113-1917
Extension Shaft

011131917
384-1159-01: RNCC: 3 | RNVC: 2

17 May 1981

3040-01-112-8768
Straight Shaft

011128768
3365708-1: RNCC: 3 | RNVC: 2
3365708-1: RNCC: 3 | RNVC: 2
3365708-1: RNCC: 5 | RNVC: 2

12 May 1981

3040-01-112-8118
Shouldered Shaft

011128118
716360: RNCC: 3 | RNVC: 2

10 May 1981

3040-01-112-6381
Rigid Connecting Link

011126381
12292428: RNCC: 3 | RNVC: 2

7 May 1981

3040-01-112-3980
Flexible Drive Shaft

011123980
8229-102: RNCC: 3 | RNVC: 2
13025094-2: RNCC: 5 | RNVC: 2
407-8229-102: RNCC: 5 | RNVC: 9
10085853: RNCC: 6 | RNVC: 9
13025094: RNCC: D | RNVC: 9

3 May 1981

3040-01-112-3557
Shouldered Shaft

011123557
518-001: RNCC: 3 | RNVC: 2
518-001: RNCC: 5 | RNVC: 9

2 May 1981

3040-01-112-3215
Straight Shaft

011123215
115318-14: RNCC: 3 | RNVC: 2

1 May 1981

3040-01-112-1868
Speedometer-Tachometer Drive Adapter

011121868
101454: RNCC: 3 | RNVC: 9
836-0604A8014: RNCC: 5 | RNVC: 2
22-01149: RNCC: 5 | RNVC: 9
0604A8014: RNCC: D | RNVC: 9

29 Apr 1981

3040-01-112-0941
Idler Gear Retaining Plate

011120941
3241H009: RNCC: 3 | RNVC: 2
1382479: RNCC: 5 | RNVC: 2
M0941082: RNCC: 5 | RNVC: 2
0941082: RNCC: 5 | RNVC: 9
982226: RNCC: 5 | RNVC: 9
02/100042: RNCC: 5 | RNVC: 9

26 Apr 1981

3040-01-112-0933
Shouldered Shaft

011120933
13216E6142-2: RNCC: 3 | RNVC: 2
13216E6142: RNCC: D | RNVC: 9

26 Apr 1981

3040-01-111-6817
Straight Shaft

011116817
3365534-1: RNCC: 3 | RNVC: 2
3365534-1: RNCC: 5 | RNVC: 2
3365534-1: RNCC: 5 | RNVC: 2

22 Apr 1981

3040-01-111-5676
Shaft Collar

011115676
A47580: RNCC: 3 | RNVC: 2
1976138: RNCC: 5 | RNVC: 2
1976138: RNCC: 5 | RNVC: 9

19 Apr 1981

3040-01-111-3997
Shouldered Shaft

011113997
2584172: RNCC: 3 | RNVC: 2
2584172: RNCC: 5 | RNVC: 2

16 Apr 1981

3040-01-111-1784
Shouldered Shaft

011111784
167C2304-3: RNCC: 3 | RNVC: 2
167C2304-2: RNCC: 5 | RNVC: 9
167C2304: RNCC: D | RNVC: 9

12 Apr 1981

3040-01-111-0547
Spur Gearshaft

011110547
1626056-3: RNCC: 3 | RNVC: 2

9 Apr 1981

3040-01-110-8969
Shouldered Shaft

011108969
037-0521-50-0: RNCC: 3 | RNVC: 2
037-0520-00: RNCC: 5 | RNVC: 9
037-0521-50: RNCC: 5 | RNVC: 9
037-0521-00: RNCC: 5 | RNVC: 9

7 Apr 1981

3040-01-110-7302
Nonvehicular Propeller Shaft

011107302
13025087: RNCC: 1 | RNVC: 2
5880: RNCC: 3 | RNVC: 2
13025087: RNCC: 3 | RNVC: 9
4-323-020-69968: RNCC: 5 | RNVC: 9
2A-24526-1: RNCC: 5 | RNVC: 9
4-69968: RNCC: 5 | RNVC: 9
13025087: RNCC: 5 | RNVC: 9
13025087: RNCC: 5 | RNVC: 9
10085798: RNCC: 6 | RNVC: 9

4 Apr 1981

3040-01-110-5477
Shouldered Shaft

011105477
12292451: RNCC: 3 | RNVC: 2

2 Apr 1981

3040-01-110-0001
Linear Actuating Cylinder Assembly

011100001
4872766-3: RNCC: 3 | RNVC: 2
4872466: RNCC: 5 | RNVC: 2

25 Mar 1981

3040-01-109-9969
Ball Joint

011099969
3153: RNCC: 3 | RNVC: 9

25 Mar 1981

3040-01-109-7770
Mechanical Drive Housing

011097770
60-021-0039-4: RNCC: 3 | RNVC: 2
01-435-0157-5 PIECE 4: RNCC: 5 | RNVC: 9
60-021-0039-4: RNCC: 5 | RNVC: 9
01-435-0157-5: RNCC: D | RNVC: 9

20 Mar 1981

3040-01-109-7725
Electrode Shaft

011097725
661464: RNCC: 3 | RNVC: 2
661464: RNCC: 5 | RNVC: 9

20 Mar 1981

3040-01-109-7724
Electrode Shaft

011097724
661463: RNCC: 3 | RNVC: 2
01-109-7724: RNCC: 5 | RNVC: 2

20 Mar 1981

3040-01-109-6234
Remote Arming Device Switch Cam

011096234
12298852: RNCC: 3 | RNVC: 2
12298852: RNCC: 5 | RNVC: 9

18 Mar 1981

3040-01-109-3981
Remote Control Lever

011093981
13214E7066: RNCC: 3 | RNVC: 2

14 Mar 1981

3040-01-109-2559
Rotating Shaft Eye Bracket

011092559
178335: RNCC: 3 | RNVC: 2
10388404: RNCC: 6 | RNVC: 9

12 Mar 1981

3040-01-109-1795
Block Isolator Moun

011091795
SM-C-879483: RNCC: 3 | RNVC: 2
SM-C-879483: RNCC: 5 | RNVC: 2

12 Mar 1981

3040-01-108-8609
Linear Actuating Cylinder Assembly Parts Kit

011088609
74913075-3: RNCC: 3 | RNVC: 2
4913075-0: RNCC: 5 | RNVC: 9
74913075: RNCC: C | RNVC: 1
74913075: RNCC: C | RNVC: 1
4860929: RNCC: D | RNVC: 9

6 Mar 1981

3040-01-108-8606
Straight Shaft

011088606
6835567: RNCC: 3 | RNVC: 2
CV60438: RNCC: 5 | RNVC: 2
6835567: RNCC: 5 | RNVC: 9

6 Mar 1981

3040-01-108-7761
Straight Shaft

011087761
6834309: RNCC: 3 | RNVC: 2
6834309: RNCC: 5 | RNVC: 9
10456836: RNCC: 6 | RNVC: 9

5 Mar 1981

3040-01-108-6250
Extension Shaft

011086250
384-1160-00: RNCC: 3 | RNVC: 2

3 Mar 1981

3040-01-108-6251
Extension Shaft

011086251
384-1179-00: RNCC: 3 | RNVC: 2

3 Mar 1981

3040-01-108-6249
Extension Shaft

011086249
384-1159-00: RNCC: 3 | RNVC: 2

3 Mar 1981

3040-01-108-6246
Extension Shaft

011086246
384-1060-00: RNCC: 3 | RNVC: 2

3 Mar 1981

3040-01-108-6248
Extension Shaft

011086248
384-1149-00: RNCC: 3 | RNVC: 2

3 Mar 1981

3040-01-108-6245
Extension Shaft

011086245
384-1058-00: RNCC: 3 | RNVC: 2

3 Mar 1981

3040-01-108-5882
Idle Hydrau Bracket

011085882
840388: RNCC: 3 | RNVC: 2
840123 PIECE 127: RNCC: 5 | RNVC: 2

2 Mar 1981

3040-01-108-5881
Idle Hydrauli Shaft

011085881
840389: RNCC: 3 | RNVC: 2
840123 PIECE 122: RNCC: 5 | RNVC: 2

2 Mar 1981

3040-01-108-5349
Shouldered Shaft

011085349
4203328: RNCC: 3 | RNVC: 2
4203328: RNCC: 5 | RNVC: 2
10085779: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-108-3701
Pawl

011083701
29798: RNCC: 3 | RNVC: 2
29798: RNCC: 5 | RNVC: 9

26 Feb 1981

3040-01-108-3702
Shouldered Shaft

011083702
2227053-3: RNCC: 3 | RNVC: 2
2227053-3: RNCC: 5 | RNVC: 1
2227053-3: RNCC: 5 | RNVC: 9

26 Feb 1981

3040-01-108-3045
Shouldered Shaft

011083045
639AS2827: RNCC: 3 | RNVC: 2

25 Feb 1981

3040-01-108-2568
Extension Shaft

011082568
925369-2: RNCC: 3 | RNVC: 2
925369-2: RNCC: 5 | RNVC: 2
925369-2: RNCC: 5 | RNVC: 9

24 Feb 1981

3040-01-108-2177
Shouldered Shaft

011082177
1627838-1: RNCC: 3 | RNVC: 2

24 Feb 1981

3040-01-108-2163
Rigid Connecting Link

011082163
65400-00111-085: RNCC: 3 | RNVC: 2

23 Feb 1981

3040-01-108-1363
Manual Control Lever

011081363
1025OT-3053: RNCC: 3 | RNVC: 9

21 Feb 1981

3040-01-108-0756
Bracket And Linkage Assy

011080756
0605A1070: RNCC: 3 | RNVC: 2
Q605A1070: RNCC: 5 | RNVC: 2

20 Feb 1981

3040-01-108-0753
Linear Actuating Cylinder Assembly Parts Kit

011080753
RCH-302K2: RNCC: 3 | RNVC: 2
RCH-302K: RNCC: 5 | RNVC: 9

20 Feb 1981

3040-01-108-0586
Pawl

011080586
9210: RNCC: 3 | RNVC: 2

20 Feb 1981

3040-01-029-4609
Shaft And Detent Assembly

010294609
618-7253-004: RNCC: 3 | RNVC: 2
618-7253-004: RNCC: 5 | RNVC: 2

17 Oct 1976

3040-01-107-8973
Straight Shaft

011078973
167C2567-2: RNCC: 3 | RNVC: 2

14 Feb 1981

3040-01-107-8262
Manual Control Lever

011078262
4N448: RNCC: 3 | RNVC: 2
4N0448: RNCC: 5 | RNVC: 2

13 Feb 1981

3040-01-026-4011
Rigid Connecting Link

010264011
2528096: RNCC: 3 | RNVC: 2

22 Aug 1976

3040-01-026-3014
Shouldered Shaft

010263014
RD17675-1: RNCC: 3 | RNVC: 2

21 Aug 1976

3040-01-025-3022
Remote Control Lever

010253022
183442: RNCC: 3 | RNVC: 2
183442: RNCC: 5 | RNVC: 9

29 Jul 1976

3040-01-106-7183
Mechanical Drive Housing

011067183
23011779: RNCC: 3 | RNVC: 2
23011779: RNCC: 5 | RNVC: 1
559623011779: RNCC: 5 | RNVC: 2
6881144: RNCC: 5 | RNVC: 9
23011779: RNCC: 5 | RNVC: 9

23 Jan 1981

3040-01-106-4048
Shouldered Shaft

011064048
6835558: RNCC: 3 | RNVC: 2

17 Jan 1981

3040-01-106-2247
Rigid Connecting Link

011062247
11662316: RNCC: 3 | RNVC: 2
1-33-48: RNCC: 5 | RNVC: 2

14 Jan 1981

3040-01-106-0446
Bell Crank

011060446
9N984: RNCC: 3 | RNVC: 2
7CA94: RNCC: 5 | RNVC: 2
9N984: RNCC: 5 | RNVC: 2
7CA94: RNCC: 5 | RNVC: 9

10 Jan 1981

3040-01-105-9112
Body Hub

011059112
8200856: RNCC: 3 | RNVC: 2

7 Jan 1981

3040-01-105-7786
Spider

011057786
3211J3026: RNCC: 3 | RNVC: 2
42480411: RNCC: 5 | RNVC: 2
42480411: RNCC: 5 | RNVC: 2
42480411EY5061-18: RNCC: 5 | RNVC: 2
3211J3026: RNCC: 5 | RNVC: 9

5 Jan 1981

3040-01-105-7557
Flexible Drive Shaft

011057557
A400-5951-7: RNCC: 3 | RNVC: 2
C9415-1: RNCC: 5 | RNVC: 2
A400-5951: RNCC: 5 | RNVC: 9
C9415: RNCC: 7 | RNVC: 2

5 Jan 1981

3040-01-105-7530
Shouldered Shaft

011057530
5428321: RNCC: 3 | RNVC: 2

4 Jan 1981

3040-01-105-6634
Mechanical Drive Housing

011056634
70357-06304-041: RNCC: 3 | RNVC: 2

1 Jan 1981

3040-01-105-6428
Intermediate Shaft

011056428
A-6584: RNCC: 3 | RNVC: 2

1 Jan 1981

3040-01-021-7979
Turbine Engine Starter Shaft

010217979
3500642-1: RNCC: 3 | RNVC: 2
3500642-1: RNCC: 5 | RNVC: 9

20 May 1976

3040-01-104-9304
Shouldered Shaft

011049304
8043965-01: RNCC: 3 | RNVC: 9

13 Dec 1980

3040-01-104-8151
Mount Yoke

011048151
10179399: RNCC: 3 | RNVC: 2

12 Dec 1980

3040-01-104-7538
Straight Shaft

011047538
180620: RNCC: 3 | RNVC: 9
620: RNCC: 5 | RNVC: 9

10 Dec 1980

3040-01-104-6434
Remote Control Lever

011046434
4N3922: RNCC: 3 | RNVC: 2
7CA308: RNCC: 5 | RNVC: 2
7CA308: RNCC: 5 | RNVC: 9

7 Dec 1980

3040-01-104-6372
Straight Shaft

011046372
4N5482: RNCC: 3 | RNVC: 2
7CA280: RNCC: 5 | RNVC: 2
7CA280: RNCC: 5 | RNVC: 9

7 Dec 1980

3040-01-020-5030
Shouldered Shaft

010205030
35-79501-1097-2: RNCC: 3 | RNVC: 2

30 Apr 1976

3040-01-104-3851
Remote Control Lever

011043851
12276954: RNCC: 3 | RNVC: 2

3 Dec 1980

3040-01-104-2993
Mechanical Drive Housing

011042993
315C114-1: RNCC: 3 | RNVC: 2
315C114-1: RNCC: 5 | RNVC: 9

2 Dec 1980

3040-01-104-0365
Rigid Connecting Link

011040365
5428065: RNCC: 3 | RNVC: 2

25 Nov 1980

3040-01-103-7983
Extension Shaft

011037983
091399: RNCC: 3 | RNVC: 2

20 Nov 1980

3040-01-103-6623
Mechanical Drive Housing

011036623
9M3025: RNCC: 3 | RNVC: 2

18 Nov 1980

3040-01-103-6009
Remote Control Lever

011036009
12256689: RNCC: 3 | RNVC: 2

15 Nov 1980

3040-01-103-5464
Breather

011035464
389874-5: RNCC: 3 | RNVC: 2

13 Nov 1980

3040-01-018-8748
Rigid Connecting Link

010188748
CPR102338: RNCC: 3 | RNVC: 2
3040010188748: RNCC: 5 | RNVC: 9
3040010188748: RNCC: 6 | RNVC: 9

31 Mar 1976

3040-01-103-1684
Shouldered Shaft

011031684
2001654-1: RNCC: 3 | RNVC: 2

10 Nov 1980

3040-01-102-4224
Linear Actuating Cylinder Assembly

011024224
126204A1: RNCC: 3 | RNVC: 2
G103549: RNCC: 5 | RNVC: 9

19 Oct 1980

3040-01-102-2510
Rigid Connecting Link

011022510
70217-02708-106: RNCC: 3 | RNVC: 2
3040PL1940177: RNCC: 6 | RNVC: 9
70217-02708: RNCC: D | RNVC: 9

16 Oct 1980

3040-01-102-0246
Body Hub

011020246
B083-002-039-0: RNCC: 3 | RNVC: 2

11 Oct 1980

3040-01-102-0074
Control Cam

011020074
12298716-2: RNCC: 3 | RNVC: 2

11 Oct 1980

3040-01-101-9848
Multiple Gears Gearshaft

011019848
6899402AL: RNCC: 3 | RNVC: 2
6899402: RNCC: 3 | RNVC: 2
6899402: RNCC: 5 | RNVC: 9

10 Oct 1980

3040-01-101-9831
Rigid Connecting Link

011019831
70400-01250-043: RNCC: 3 | RNVC: 2
700400-01250-043: RNCC: 5 | RNVC: 9
70400-01250-043: RNCC: 5 | RNVC: 9
70400-01250-043: RNCC: 5 | RNVC: 9
1100010-043: RNCC: 5 | RNVC: 9
2012-1: RNCC: 5 | RNVC: 9
70400-01250-043: RNCC: 5 | RNVC: 9
70400-01250-043: RNCC: 5 | RNVC: 9
70400-01250-043: RNCC: 5 | RNVC: 9
70400-01250-043: RNCC: 5 | RNVC: 9

10 Oct 1980

3040-01-101-9217
Nonrotating Shaft Eye Bracket

011019217
04100225: RNCC: 3 | RNVC: 2
355177: RNCC: 5 | RNVC: 2
212756-1: RNCC: 5 | RNVC: 2
355177: RNCC: 5 | RNVC: 2
A04100225: RNCC: 5 | RNVC: 9

9 Oct 1980

3040-01-101-8349
Control Cam

011018349
12266285: RNCC: 3 | RNVC: 2

8 Oct 1980

3040-01-101-7460
Linear Actuating Cylinder Assembly

011017460
G103727: RNCC: 3 | RNVC: 2

5 Oct 1980

3040-01-016-8407
Mechanical Drive Housing

010168407
8436943: RNCC: 3 | RNVC: 2

25 Feb 1976

3040-01-101-4155
Shouldered Shaft

011014155
3340293: RNCC: 3 | RNVC: 2
MA280-21068: RNCC: 5 | RNVC: 9

29 Sep 1980

3040-01-101-3982
Shouldered Shaft

011013982
823-B-183-1: RNCC: 3 | RNVC: 2
7513-0110-5: RNCC: 7 | RNVC: 9

28 Sep 1980

3040-01-101-3004
Linear Actuating Cylinder Assembly

011013004
G107906: RNCC: 3 | RNVC: 2
HI G107906: RNCC: 5 | RNVC: 2
G103207: RNCC: 5 | RNVC: 9

27 Sep 1980

3040-01-101-2433
Mechanical Drive Housing

011012433
A04100271: RNCC: 3 | RNVC: 2
294342: RNCC: 5 | RNVC: 2
04100271: RNCC: 5 | RNVC: 2

25 Sep 1980

3040-01-101-0085
Linear Actuating Cylinder

011010085
2046070: RNCC: 3 | RNVC: 2
10876307: RNCC: 3 | RNVC: 2

18 Sep 1980

3040-01-101-0086
Straight Shaft

011010086
10876355: RNCC: 3 | RNVC: 2
3004685: RNCC: 5 | RNVC: 2

18 Sep 1980

3040-01-100-8657
Shaft Retaining Plate

011008657
12009041: RNCC: 3 | RNVC: 2

14 Sep 1980

3040-01-100-7143
Linear Actuating Cylinder Assembly Parts Kit

011007143
74906390: RNCC: 3 | RNVC: 2
4906390-2: RNCC: 5 | RNVC: 9

11 Sep 1980

3040-01-099-9466
Linear Actuating Cylinder Assembly Parts Kit

010999466
1045Z1623: RNCC: 3 | RNVC: 2

27 Aug 1980

3040-01-099-9436
Shaft Collar

010999436
16101048: RNCC: 3 | RNVC: 9
16101048: RNCC: C | RNVC: 1
CAFB1892A: RNCC: C | RNVC: 1

27 Aug 1980

3040-01-099-7354
Straight Shaft

010997354
2G8617: RNCC: 3 | RNVC: 2

22 Aug 1980

3040-01-099-6997
Body Hub

010996997
33426161: RNCC: 3 | RNVC: 2
M33426161: RNCC: 5 | RNVC: 2
229875: RNCC: 5 | RNVC: 9
02/100041: RNCC: 5 | RNVC: 9
229875: RNCC: C | RNVC: 1

22 Aug 1980

3040-01-099-6459
Rigid Connecting Link

010996459
12271203: RNCC: 3 | RNVC: 2

22 Aug 1980

3040-01-099-4659
Pawl

010994659
400989: RNCC: 3 | RNVC: 2

20 Aug 1980

3040-01-099-0145
Bracket Shaft

010990145
CAFB3714A: RNCC: 3 | RNVC: 9
NAFB3714A: RNCC: 5 | RNVC: 9
328403 PIECE 3: RNCC: 5 | RNVC: 9
AFB3714A: RNCC: 5 | RNVC: 9
CAFB3714A: RNCC: C | RNVC: 1

10 Aug 1980

3040-01-098-6866
Manual Control Lever

010986866
0302773: RNCC: 3 | RNVC: 2
302773: RNCC: 5 | RNVC: 9
0302773: RNCC: 5 | RNVC: 9

6 Aug 1980

3040-01-098-5918
Manual Control Lever

010985918
400418: RNCC: 3 | RNVC: 2
400418: RNCC: 5 | RNVC: 9

5 Aug 1980

3040-01-098-3687
Idler Gear Shaft

010983687
1380755: RNCC: 3 | RNVC: 2
M32716117: RNCC: 5 | RNVC: 2
02/100161: RNCC: 5 | RNVC: 9
161504: RNCC: 5 | RNVC: 9
32716117: RNCC: 5 | RNVC: 9

31 Jul 1980

3040-01-098-2460
Wiper Arm Shaft

010982460
388: RNCC: 3 | RNVC: 2
KS-9326-1 PIECE 17: RNCC: 5 | RNVC: 2
388: RNCC: 5 | RNVC: 9
KS-9326-1 PIECE 17: RNCC: 5 | RNVC: 9

29 Jul 1980

3040-01-012-4705
Mechanical Drive Housing

010124705
10887355: RNCC: 3 | RNVC: 2
3040010124705: RNCC: 5 | RNVC: 9
1015010124705: RNCC: 5 | RNVC: 9
3040010124705: RNCC: 6 | RNVC: 9
1015010124705: RNCC: 6 | RNVC: 9

11 Nov 1975

3040-01-097-6807
Rigid Connecting Link

010976807
11584804: RNCC: 3 | RNVC: 2

17 Jul 1980

3040-01-096-9856
Counterbalance Weight

010969856
3033T37P02: RNCC: 3 | RNVC: 2
303T37P02: RNCC: 5 | RNVC: 9

2 Jul 1980

3040-01-096-8591
Breather

010968591
206963B: RNCC: 3 | RNVC: 2
206963B: RNCC: 5 | RNVC: 9

29 Jun 1980

3040-01-096-7084
Straight Shaft

010967084
16S256-7: RNCC: 3 | RNVC: 2
16S256-7: RNCC: 5 | RNVC: 9
16S256: RNCC: D | RNVC: 9

26 Jun 1980

3040-01-096-5352
Support Shaft

010965352
70400-02224-102: RNCC: 3 | RNVC: 2

24 Jun 1980

3040-01-096-3312
Spur Gearshaft

010963312
6835179: RNCC: 3 | RNVC: 2
2AX292: RNCC: 5 | RNVC: 2
2AX292: RNCC: 5 | RNVC: 9

18 Jun 1980

3040-01-096-1619
Shouldered Shaft

010961619
841190: RNCC: 3 | RNVC: 2
841190: RNCC: C | RNVC: 1

14 Jun 1980

3040-01-096-1137
Rigid Connecting Link

010961137
70400-02252-128: RNCC: 1 | RNVC: 2
2004-3: RNCC: 3 | RNVC: 2
1100090-128: RNCC: 5 | RNVC: 9
SR11727A: RNCC: 5 | RNVC: 9
3040PL1939749: RNCC: 6 | RNVC: 9

14 Jun 1980

3040-01-096-1135
Rigid Connecting Link

010961135
70400-02252-131: RNCC: 3 | RNVC: 2
70400-02252-131: RNCC: 5 | RNVC: 2
70400-02252-131: RNCC: 5 | RNVC: 9
2003-3: RNCC: 5 | RNVC: 9
SR11771A: RNCC: 5 | RNVC: 9
SR11825A: RNCC: 5 | RNVC: 9
1100100-131: RNCC: 5 | RNVC: 9
SR11825A: RNCC: 5 | RNVC: 9
SR11771A: RNCC: 5 | RNVC: 9
3040PL1939775: RNCC: 6 | RNVC: 9

14 Jun 1980

3040-01-096-1138
Rigid Connecting Link

010961138
70400-02252-134: RNCC: 1 | RNVC: 2
2004-9: RNCC: 3 | RNVC: 2
SR11774A: RNCC: 3 | RNVC: 9
1100090-134: RNCC: 5 | RNVC: 9

14 Jun 1980

3040-01-096-1134
Rigid Connecting Link

010961134
70400-02252-132: RNCC: 1 | RNVC: 2
2004-7: RNCC: 3 | RNVC: 2
1100090-132: RNCC: 5 | RNVC: 9
AS4-1000-132: RNCC: 5 | RNVC: 9
SR11772A: RNCC: 5 | RNVC: 9
3040PL1960078: RNCC: 6 | RNVC: 9

14 Jun 1980

3040-01-095-9691
Rigid Connecting Link

010959691
M/279-20001: RNCC: 3 | RNVC: 2
M-B279-20000: RNCC: D | RNVC: 9

10 Jun 1980

3040-01-095-8653
Rigid Connecting Link

010958653
MB279-20000: RNCC: 3 | RNVC: 2

7 Jun 1980

3040-01-095-5870
Straight Shaft

010955870
9P60: RNCC: 3 | RNVC: 2

4 Jun 1980

3040-01-095-2644
Shaft Assembly Stub

010952644
7H980: RNCC: 3 | RNVC: 2

28 May 1980

3040-01-095-2640
Shouldered Shaft

010952640
384-1111-00: RNCC: 3 | RNVC: 2

28 May 1980

3040-01-095-2089
Linear Actuating Cylinder Piston

010952089
8J4574: RNCC: 3 | RNVC: 2

24 May 1980

3040-01-095-1670
Shaft Collar

010951670
MSS91572-1: RNCC: 3 | RNVC: 9

23 May 1980

3040-01-095-1276
Linear Actuating Cylinder Assembly Parts Kit

010951276
5R4765: RNCC: 3 | RNVC: 2

22 May 1980

3040-01-094-9727
Clutch Cradle

010949727
0325014: RNCC: 3 | RNVC: 2
325014: RNCC: 5 | RNVC: 2
325014: RNCC: 5 | RNVC: 2
325014: RNCC: 5 | RNVC: 9
0325014: RNCC: 5 | RNVC: 9
0325014: RNCC: 5 | RNVC: 9
325014: RNCC: 5 | RNVC: 9
0325014: RNCC: 5 | RNVC: 9
325014: RNCC: 5 | RNVC: 9
325014: RNCC: 5 | RNVC: 9

21 May 1980

3040-01-094-8595
Shouldered Shaft

010948595
114D6263-4: RNCC: 3 | RNVC: 2
114D6263-2: RNCC: C | RNVC: 1

17 May 1980

3040-01-094-7941
Remote Control Lever

010947941
12283704: RNCC: 3 | RNVC: 2
XM67127: RNCC: 5 | RNVC: 9

16 May 1980

3040-01-094-6428
Helical Gearshaft

010946428
3P0323: RNCC: 3 | RNVC: 2
3P323: RNCC: D | RNVC: 9

13 May 1980

3040-01-094-5350
Push-Pull Control Assembly

010945350
56-3363-2113: RNCC: 3 | RNVC: 2
56-3363-2113: RNCC: 3 | RNVC: 9
8D5286: RNCC: 5 | RNVC: 2
8D5286: RNCC: 5 | RNVC: 2
8D5286: RNCC: 5 | RNVC: 2
D300080-000-0109.0: RNCC: 5 | RNVC: 2
8D5286: RNCC: 5 | RNVC: 2
D300080-000-0109.0: RNCC: 5 | RNVC: 9

10 May 1980

3040-01-094-5177
Shouldered Shaft

010945177
667086-5: RNCC: 3 | RNVC: 9
667086-5: RNCC: C | RNVC: 1

10 May 1980

3040-01-094-5176
Shouldered Shaft

010945176
3P0754: RNCC: 3 | RNVC: 2
3P754: RNCC: D | RNVC: 9

10 May 1980

3040-01-094-3014
Shouldered Shaft

010943014
3P5737: RNCC: 3 | RNVC: 2

7 May 1980

3040-01-093-4684
Shaft Retaining Plate

010934684
23001334: RNCC: 3 | RNVC: 2
23001334: RNCC: 5 | RNVC: 9

18 Apr 1980

3040-01-093-3061
Extension Shaft

010933061
384-1322-00: RNCC: 3 | RNVC: 2

15 Apr 1980

3040-01-093-0459
Manual Control Lever

010930459
A1D-L60441: RNCC: 3 | RNVC: 2
818L60441: RNCC: 3 | RNVC: 2
L60441: RNCC: 3 | RNVC: 2

9 Apr 1980

3040-01-092-7998
Remote Control Lever

010927998
3492672: RNCC: 3 | RNVC: 2
075-096: RNCC: 5 | RNVC: 9

4 Apr 1980

3040-01-092-3186
Mechanical Drive Housing

010923186
12009057: RNCC: 3 | RNVC: 2

22 Mar 1980

3040-01-092-1303
Ring

010921303
D71-266-2: RNCC: 3 | RNVC: 2

20 Mar 1980

3040-01-005-6889
Linear Actuating Cylinder Piston Rod

010056889
406122: RNCC: 3 | RNVC: 9

4 Jul 1975

3040-01-091-8930
Body Hub

010918930
8141907: RNCC: 3 | RNVC: 2
8141907: RNCC: 3 | RNVC: 9
8141907: RNCC: 5 | RNVC: 9
7814190: RNCC: C | RNVC: 1

14 Mar 1980

3040-01-091-3591
Rigid Connecting Link

010913591
8620212: RNCC: 3 | RNVC: 2

6 Mar 1980

3040-01-004-6494
Linear Actuating Cylinder Piston Rod

010046494
H34544: RNCC: 3 | RNVC: 9
H34544: RNCC: 5 | RNVC: 9
H34544: RNCC: C | RNVC: 1
H34544: RNCC: C | RNVC: 1

29 May 1975

3040-01-091-3089
Hydraulic Accumulator

010913089
A4A0231D1K: RNCC: 3 | RNVC: 9
A4A0231B1K: RNCC: 5 | RNVC: 9
A4A0231B1K: RNCC: 5 | RNVC: 9
A4A0231B1: RNCC: 5 | RNVC: 9

5 Mar 1980

3040-01-091-1774
Disc Brake Caliper

010911774
12008325-2: RNCC: 3 | RNVC: 2
419-321: RNCC: E | RNVC: 8
12008325-1: RNCC: E | RNVC: 8

3 Mar 1980

3040-01-003-6257
Thrust Collar Parts Kit

010036257
125D371ADG-1: RNCC: 3 | RNVC: 9
125D371AD: RNCC: 5 | RNVC: 9
125D371ADG1: RNCC: C | RNVC: 1
125D371ADG-1: RNCC: C | RNVC: 1
125D371ADG-1: RNCC: C | RNVC: 1

1 May 1975

3040-01-090-3082
Counterbalance Weight

010903082
3033T37P13: RNCC: 3 | RNVC: 2

16 Feb 1980

3040-01-090-3079
Counterbalance Weight

010903079
3033T37P10: RNCC: 3 | RNVC: 2
3033T37P10: RNCC: 5 | RNVC: 2
3033T37P10: RNCC: 5 | RNVC: 9
3033T37: RNCC: D | RNVC: 9

16 Feb 1980

3040-01-090-1204
Push-Pull Control Assembly

010901204
15012047: RNCC: 3 | RNVC: 9

13 Feb 1980

3040-01-089-9326
Remote Control Lever

010899326
12276913: RNCC: 3 | RNVC: 2
12276913: RNCC: 5 | RNVC: 2

9 Feb 1980

3040-01-089-3955
Counterbalance Weight

010893955
387384CL6: RNCC: 3 | RNVC: 2

31 Jan 1980

3040-01-088-9161
Nonrotating Shaft Eye Bracket

010889161
8758403: RNCC: 3 | RNVC: 2

23 Jan 1980

3040-01-088-4148
Vibration Damper Hub Sleeve

010884148
23514147: RNCC: 3 | RNVC: 2
5142679: RNCC: 5 | RNVC: 9
23515634: RNCC: 5 | RNVC: 9
23506511: RNCC: 5 | RNVC: 9
8925528: RNCC: 5 | RNVC: 9
3040PL1288779: RNCC: 6 | RNVC: 9
8925528: RNCC: C | RNVC: 1

12 Jan 1980

3040-01-088-2984
Transducer Velocity Shaft

010882984
07930-60227: RNCC: 3 | RNVC: 2
07930-60226: RNCC: 5 | RNVC: 2
07930-60202: RNCC: 5 | RNVC: 9
07905-60049: RNCC: 5 | RNVC: 9

10 Jan 1980

3040-01-088-1920
Bell Crank

010881920
70400-01219-043: RNCC: 3 | RNVC: 2

8 Jan 1980

3040-01-088-1006
Control Cam

010881006
4264: RNCC: 3 | RNVC: 2

5 Jan 1980

3040-01-087-9495
Linear Actuating Cylinder Assembly

010879495
A100-1-1/8: RNCC: 3 | RNVC: 2
AV11/8X6-SVSR-AA-24VDC: RNCC: 5 | RNVC: 9

30 Dec 1979

3040-01-087-8491
Manual Control Lever

010878491
SM-C-766148: RNCC: 3 | RNVC: 2
SM-C-766148: RNCC: 5 | RNVC: 9

28 Dec 1979

3040-01-087-8489
Manual Control Lever

010878489
SM-C-915907: RNCC: 3 | RNVC: 2
SM-C-915907: RNCC: 5 | RNVC: 9

28 Dec 1979

3040-01-087-8488
Pawl

010878488
SM-B-765973: RNCC: 3 | RNVC: 9
SM-B-765973: RNCC: 5 | RNVC: 9
SM-B-765973: RNCC: 5 | RNVC: 9
SM-B-765973: RNCC: 5 | RNVC: 9

28 Dec 1979

3040-01-087-7664
Shouldered Shaft

010877664
SM-D-915845: RNCC: 3 | RNVC: 2
SM-D-915845: RNCC: 5 | RNVC: 9

25 Dec 1979

3040-01-087-4560
Linear Actuating Cylinder Assembly Parts Kit

010874560
643280: RNCC: 3 | RNVC: 2
643280: RNCC: 5 | RNVC: 9

18 Dec 1979

3040-01-087-3478
Spur Gearshaft

010873478
715796: RNCC: 3 | RNVC: 2

15 Dec 1979

3040-01-087-2141
Manual Control Lever

010872141
SM-B-765597: RNCC: 3 | RNVC: 2
BP1047: RNCC: 5 | RNVC: 2
SM-B-765597: RNCC: 5 | RNVC: 9
SM-B-765597: RNCC: 5 | RNVC: 9
SM-B-765597: RNCC: 5 | RNVC: 9

13 Dec 1979

3040-01-087-2136
Manual Control Lever

010872136
SM-B-765975: RNCC: 3 | RNVC: 2
41753A: RNCC: 5 | RNVC: 9
SM-B-765975: RNCC: 5 | RNVC: 9
SM-B-765975: RNCC: 5 | RNVC: 9

13 Dec 1979

3040-01-087-2138
Straight Shaft

010872138
SM-B-765021: RNCC: 3 | RNVC: 2
SM-B-765021: RNCC: 5 | RNVC: 9

13 Dec 1979

3040-01-087-2137
Manual Control Lever

010872137
SM-B-765974: RNCC: 3 | RNVC: 2
SM-B-765974: RNCC: 5 | RNVC: 9

13 Dec 1979

3040-01-087-2134
Manual Control Lever

010872134
SM-B-765047: RNCC: 3 | RNVC: 2
SM-B-765047: RNCC: 5 | RNVC: 9
41723A: RNCC: 5 | RNVC: 9

13 Dec 1979

3040-01-087-1828
Straight Shaft

010871828
SM-B-764698: RNCC: 3 | RNVC: 2
SM-B-764698: RNCC: 5 | RNVC: 9

13 Dec 1979

3040-01-087-1543
Straight Shaft

010871543
3006390: RNCC: 3 | RNVC: 2
AR12530: RNCC: 3 | RNVC: 2
BM76008: RNCC: 3 | RNVC: 2
2910000586590: RNCC: 5 | RNVC: 9
2910000586590: RNCC: 6 | RNVC: 9

12 Dec 1979

3040-01-086-5216
Turbine Oil Pump Shaft

010865216
357950110052: RNCC: 3 | RNVC: 2

30 Nov 1979

3040-01-086-5076
Counterbalance Weight

010865076
A334A165-110: RNCC: 3 | RNVC: 2

30 Nov 1979

3040-01-086-0610
Nonrotating Shaft Eye Bracket

010860610
403882: RNCC: 3 | RNVC: 2
403882: RNCC: 5 | RNVC: 9

20 Nov 1979

3040-01-085-9660
Spur Gearshaft

010859660
SYLC657: RNCC: 3 | RNVC: 2

20 Nov 1979

3040-01-085-9335
Shouldered Shaft

010859335
BE-21592-3: RNCC: 3 | RNVC: 2
19AS508: RNCC: 5 | RNVC: 2
BE-21592-3: RNCC: 5 | RNVC: 2
19AS508: RNCC: 5 | RNVC: 9
BE-21592: RNCC: D | RNVC: 9

18 Nov 1979

3040-01-085-7959
Linear Actuating Cylinder Assembly

010857959
G101275: RNCC: 3 | RNVC: 2
G101275: RNCC: 5 | RNVC: 2

15 Nov 1979

3040-01-085-6871
Linear Actuating Cylinder Assembly Parts Kit

010856871
568-L8962-2: RNCC: 3 | RNVC: 2
TTI-L8962-2: RNCC: 5 | RNVC: 2
L-8962-2: RNCC: 5 | RNVC: 9

12 Nov 1979

3040-01-085-4848
Linear Actuating Cylinder Assembly Parts Kit

010854848
RE18736: RNCC: 3 | RNVC: 2
AT52705: RNCC: 5 | RNVC: 9
AR105409: RNCC: 5 | RNVC: 9
AR96529: RNCC: 5 | RNVC: 9
RE18736: RNCC: 5 | RNVC: 9

9 Nov 1979

3040-01-085-3820
Linear Actuating Cylinder Assembly Parts Kit

010853820
AR15355: RNCC: 3 | RNVC: 2
AR99791: RNCC: 5 | RNVC: 9
AT55691: RNCC: 5 | RNVC: 9

7 Nov 1979

3040-01-085-2871
Tachometer Drive Shaft

010852871
212607: RNCC: 3 | RNVC: 2

5 Nov 1979

3040-01-085-2599
Nonrotating Shaft Eye Bracket

010852599
11830562: RNCC: 3 | RNVC: 2

4 Nov 1979

3040-01-085-1703
Rigid Connecting Link

010851703
3820045: RNCC: 3 | RNVC: 2

1 Nov 1979

3040-01-085-1620
Remote Control Lever

010851620
351-13551: RNCC: 3 | RNVC: 2

1 Nov 1979

3040-01-085-0445
Shouldered Shaft

010850445
716804: RNCC: 3 | RNVC: 2

28 Oct 1979

3040-01-085-0276
Spline Adapter

010850276
716805: RNCC: 3 | RNVC: 2

28 Oct 1979

3040-01-084-2823
Bell Crank

010842823
L59090: RNCC: 3 | RNVC: 2

14 Oct 1979

3040-01-084-2798
Rigid Connecting Link

010842798
L59968: RNCC: 3 | RNVC: 2

14 Oct 1979

3040-01-084-2604
Straight Shaft

010842604
761-0217-002: RNCC: 3 | RNVC: 2

13 Oct 1979

3040-01-084-1329
Shouldered Shaft

010841329
12267821: RNCC: 3 | RNVC: 2
DAX12293: RNCC: 5 | RNVC: 2

11 Oct 1979

3040-01-084-0467
Turb Shaft Assembly

010840467
408649-1: RNCC: 3 | RNVC: 2
5199856: RNCC: 5 | RNVC: 1
5199856: RNCC: 5 | RNVC: 2
3040010840467: RNCC: 5 | RNVC: 9
3040010840467: RNCC: 6 | RNVC: 9

7 Oct 1979

3040-01-084-0384
Straight Shaft

010840384
NP3817068: RNCC: 3 | RNVC: 9
NP3817068: RNCC: C | RNVC: 1

6 Oct 1979

3040-01-083-7087
Mechanical Drive Housing

010837087
413050: RNCC: 3 | RNVC: 2

29 Sep 1979

3040-01-083-5947
Air Throttle Control Parts Kit

010835947
3WB221: RNCC: 3 | RNVC: 2
3WB221: RNCC: 5 | RNVC: 9
117612: RNCC: 5 | RNVC: 9
3WB221: RNCC: 5 | RNVC: 9
3040010835947: RNCC: 6 | RNVC: 9
3WB221: RNCC: 6 | RNVC: 9

26 Sep 1979

3040-01-083-4352
Shouldered Shaft

010834352
4M9214: RNCC: 3 | RNVC: 2

22 Sep 1979

3040-01-083-1164
Pawl

010831164
12253968: RNCC: 3 | RNVC: 2

17 Sep 1979

3040-01-083-1050
Linear Actuating Cylinder Assembly

010831050
2330-1009-060: RNCC: 3 | RNVC: 2
6600140: RNCC: 3 | RNVC: 2
0330-1009-060: RNCC: 5 | RNVC: 9

16 Sep 1979

3040-01-083-0507
Rigid Connecting Link

010830507
14-13902-3: RNCC: 3 | RNVC: 9
6604-3: RNCC: 5 | RNVC: 2
14-13902-3: RNCC: C | RNVC: 1

14 Sep 1979

3040-01-082-8869
Linear Actuating Cylinder Assembly

010828869
7016-BL: RNCC: 3 | RNVC: 2
297798: RNCC: 5 | RNVC: 9
297798: RNCC: 5 | RNVC: 9
9056067: RNCC: 5 | RNVC: 9
297798: RNCC: C | RNVC: 1
7016-BL: RNCC: C | RNVC: 1
9056067: RNCC: D | RNVC: 9

12 Sep 1979

3040-01-082-7811
Shouldered Shaft

010827811
42277-140: RNCC: 3 | RNVC: 9
42277D140: RNCC: 5 | RNVC: 9

10 Sep 1979

3040-01-082-3599
Nonrotating Shaft Eye Bracket

010823599
8344245: RNCC: 3 | RNVC: 2

1 Sep 1979

3040-01-082-3198
Brake Drum

010823198
39216: RNCC: 3 | RNVC: 9
3219W3091: RNCC: 5 | RNVC: 2
3219W3091: RNCC: 5 | RNVC: 2
3219W3091: RNCC: 5 | RNVC: 9
3219W3091: RNCC: 5 | RNVC: 9

31 Aug 1979

3040-01-082-2677
Bevel Gearshaft

010822677
02-23-00064-005: RNCC: 3 | RNVC: 2

30 Aug 1979

3040-01-081-9765
Hydraulic Accumulator Cylinder

010819765
11567875: RNCC: 3 | RNVC: 2

24 Aug 1979

3040-01-081-9102
Manual Control Lever

010819102
402285: RNCC: 3 | RNVC: 2
402285: RNCC: 5 | RNVC: 9

22 Aug 1979

3040-01-081-6490
Brake Disc

010816490
B401BF446: RNCC: 3 | RNVC: 2

18 Aug 1979

3040-01-081-6350
Linear Actuating Cylinder Assembly

010816350
1017-32150-01: RNCC: 3 | RNVC: 2
311KS284: RNCC: 5 | RNVC: 2
311KS284: RNCC: 5 | RNVC: 9

17 Aug 1979

3040-01-081-5328
Straight Shaft

010815328
12285933: RNCC: 3 | RNVC: 2

16 Aug 1979

3040-01-081-5151
Disk Brake Shoe

010815151
131222-002: RNCC: 3 | RNVC: 2

15 Aug 1979

3040-01-081-2752
Shaft Retaining Plate

010812752
8438: RNCC: 3 | RNVC: 2
D82809: RNCC: 5 | RNVC: 2

11 Aug 1979

3040-01-081-1870
Quick Release T Hub

010811870
7308599-00: RNCC: 3 | RNVC: 2
X01339: RNCC: 5 | RNVC: 2
3040PL0934289: RNCC: 6 | RNVC: 9

10 Aug 1979

3040-01-081-1625
Linear Actuating Cylinder Piston

010811625
G100442: RNCC: 3 | RNVC: 2

9 Aug 1979

3040-01-080-9600
Linear Actuating Cylinder Assembly Parts Kit

010809600
42219: RNCC: 3 | RNVC: 2
18GS128: RNCC: 5 | RNVC: 2
18GS128: RNCC: 5 | RNVC: 9

5 Aug 1979

3040-01-080-9599
Shaft Collar

010809599
CS-7: RNCC: 3 | RNVC: 9
A05815: RNCC: 5 | RNVC: 2
CS-7: RNCC: 5 | RNVC: 2

5 Aug 1979

3040-01-080-5592
Mechanical Drive Housing

010805592
12282695: RNCC: 3 | RNVC: 2
XM60853: RNCC: 5 | RNVC: 9

28 Jul 1979

3040-01-080-4038
Shaft Retaining Plate

010804038
910-0003: RNCC: 3 | RNVC: 2
910-003: RNCC: 5 | RNVC: 9

26 Jul 1979

3040-01-080-3288
Shouldered Shaft

010803288
12267791: RNCC: 3 | RNVC: 2
DAX13342: RNCC: 5 | RNVC: 2

25 Jul 1979

3040-00-986-8841
Gearshaft And Beari

009868841
763-8558-001: RNCC: 3 | RNVC: 2
763-8572-001: RNCC: 5 | RNVC: 9

26 Oct 1966

3040-01-080-0638
Linear Actuating Cylinder Assembly

010800638
74869621: RNCC: 3 | RNVC: 2
4869621-5: RNCC: 5 | RNVC: 2

19 Jul 1979

3040-01-079-9141
Decompression Valve Shaft

010799141
03063800: RNCC: 3 | RNVC: 2
69454: RNCC: 5 | RNVC: 9

16 Jul 1979

3040-01-079-5098
Control Cam

010795098
12267439: RNCC: 3 | RNVC: 2
23011039: RNCC: 5 | RNVC: 2
DAX12653: RNCC: 5 | RNVC: 2

7 Jul 1979

3040-01-079-4797
Remote Control Lever

010794797
12267895: RNCC: 3 | RNVC: 2
23011027: RNCC: 5 | RNVC: 2
DAX12912: RNCC: 5 | RNVC: 2

7 Jul 1979

3040-01-079-4794
Rigid Connecting Link

010794794
12267437: RNCC: 3 | RNVC: 2
23011037: RNCC: 5 | RNVC: 2
DAX12649: RNCC: 5 | RNVC: 2

7 Jul 1979

3040-01-079-4627
Manual Control Lever

010794627
12267440: RNCC: 1 | RNVC: 2
23011036: RNCC: 3 | RNVC: 2
DAX12655: RNCC: 5 | RNVC: 2

7 Jul 1979

3040-01-079-2300
Shouldered Shaft

010792300
791-0942-001: RNCC: 3 | RNVC: 2

30 Jun 1979

3040-01-079-1258
Shouldered Shaft

010791258
03059700: RNCC: 3 | RNVC: 2
69361: RNCC: 5 | RNVC: 9

27 Jun 1979

3040-01-078-7727
Rigid Connecting Link

010787727
12271710: RNCC: 3 | RNVC: 2

20 Jun 1979

3040-01-078-7622
Hub Clamp

010787622
12271975: RNCC: 3 | RNVC: 2
L4-2: RNCC: 5 | RNVC: 2

20 Jun 1979

3040-01-078-4378
Remote Control Lever

010784378
12283701: RNCC: 3 | RNVC: 2
XM67110: RNCC: 5 | RNVC: 9

13 Jun 1979

3040-01-078-4379
Remote Control Lever

010784379
12283700: RNCC: 3 | RNVC: 2
12283700: RNCC: 5 | RNVC: 9
XM67109: RNCC: 5 | RNVC: 9

13 Jun 1979

3040-01-078-0897
Rigid Connecting Link

010780897
12283091: RNCC: 3 | RNVC: 2
XM66562: RNCC: 5 | RNVC: 9

6 Jun 1979

3040-01-077-7401
Spur Gearshaft

010777401
9N1974: RNCC: 3 | RNVC: 2

31 May 1979

3040-01-077-6621
Shaft Collar

010776621
119547: RNCC: 3 | RNVC: 2

28 May 1979

3040-00-983-7353
Shaft Collar

009837353
SM4920-1: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-01-077-5261
Straight Shaft

010775261
12253975: RNCC: 3 | RNVC: 2

25 May 1979

3040-01-077-4974
Pawl

010774974
B-43-068-1: RNCC: 3 | RNVC: 9

24 May 1979

3040-00-983-5236
Shaft Collar

009835236
490D932G01: RNCC: 3 | RNVC: 2
490D932G01: RNCC: 5 | RNVC: 9

1 Jan 1962

NSN 3040-01-077-2789 010772789 PLATE,RETAINING,SHAFT

3040-01-077-2789
Shaft Retaining Plate

010772789
9N1560: RNCC: 3 | RNVC: 2

20 May 1979

3040-01-077-2331
Straight Shaft

010772331
9N1632: RNCC: 3 | RNVC: 2

19 May 1979

3040-01-077-1593
Hub Clamp

010771593
12273280: RNCC: 1 | RNVC: 2
26063: RNCC: 3 | RNVC: 2
L1-6: RNCC: 3 | RNVC: 2
CG3-11: RNCC: 5 | RNVC: 9
CG3-5: RNCC: 5 | RNVC: 9

19 May 1979

3040-01-077-0986
Extension Shaft

010770986
384-1059-00: RNCC: 3 | RNVC: 2

18 May 1979

3040-01-077-0039
Extension Shaft

010770039
384-1153-00: RNCC: 3 | RNVC: 2

16 May 1979

3040-01-076-9365
Rigid Connecting Link

010769365
12267433: RNCC: 1 | RNVC: 2
23011044: RNCC: 3 | RNVC: 2
DAX12638: RNCC: 5 | RNVC: 2
23011044: RNCC: 5 | RNVC: 2

16 May 1979

3040-01-076-9292
Nonrotating Shaft Eye Bracket

010769292
12266336: RNCC: 3 | RNVC: 2

16 May 1979

3040-01-076-9269
Shouldered Shaft

010769269
AE18762-001: RNCC: 3 | RNVC: 2
AE96673R: RNCC: D | RNVC: 9

16 May 1979

3040-00-982-8597
Shaft Collar

009828597
114D5086-1: RNCC: 3 | RNVC: 2
114D5086-1: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-076-8636
Spur Gear Assembly

010768636
9N1403: RNCC: 3 | RNVC: 2

13 May 1979

3040-01-076-4642
Bearing Shaft

010764642
402993: RNCC: 3 | RNVC: 2
402993: RNCC: 5 | RNVC: 9

6 May 1979

3040-01-076-4393
Spur Gearshaft

010764393
12277441: RNCC: 3 | RNVC: 9
12277441: RNCC: C | RNVC: 1

6 May 1979

3040-01-076-4392
Spur Gearshaft

010764392
12277531: RNCC: 3 | RNVC: 9
12277531: RNCC: 5 | RNVC: 2

6 May 1979

3040-01-076-4340
Nonrotating Shaft Eye Bracket

010764340
12277520: RNCC: 3 | RNVC: 9
12277520: RNCC: 5 | RNVC: 2

6 May 1979

3040-01-075-9279
Shouldered Shaft

010759279
791-0952-001: RNCC: 3 | RNVC: 2

29 Apr 1979

3040-01-075-9280
Shouldered Shaft

010759280
791-0953-001: RNCC: 3 | RNVC: 2

29 Apr 1979

3040-01-075-9278
Shouldered Shaft

010759278
791-0951-001: RNCC: 3 | RNVC: 2

29 Apr 1979

3040-01-075-8215
Linear Actuating Cylinder Assembly

010758215
4825041-9: RNCC: 3 | RNVC: 2
4825041: RNCC: 5 | RNVC: 2
74825041: RNCC: C | RNVC: 1

27 Apr 1979

3040-01-075-7947
Control Cam

010757947
12266049: RNCC: 3 | RNVC: 2
12266049: RNCC: 5 | RNVC: 9

26 Apr 1979

3040-01-075-7948
Control Cam

010757948
12266048: RNCC: 3 | RNVC: 2
12266048: RNCC: 5 | RNVC: 9

26 Apr 1979

3040-01-075-7399
Azimuth Elevation Eccentric Shoe

010757399
12266681: RNCC: 3 | RNVC: 2
6695-587: RNCC: 5 | RNVC: 9
6695-587: RNCC: 5 | RNVC: 9

26 Apr 1979

3040-01-075-2736
Remote Control Lever

010752736
12266294: RNCC: 3 | RNVC: 2
666841-3: RNCC: 5 | RNVC: 9
666841-5: RNCC: 5 | RNVC: 9
12266294: RNCC: 5 | RNVC: 9
12266294: RNCC: C | RNVC: 1

18 Apr 1979

3040-01-075-1878
Diffe Gear Assembly

010751878
3965147: RNCC: 3 | RNVC: 2
25127-1X: RNCC: 5 | RNVC: 2
3965147: RNCC: 5 | RNVC: 9
25127X: RNCC: 5 | RNVC: 9
3965147: RNCC: 5 | RNVC: 9

15 Apr 1979

3040-00-980-9670
Shaft Collar

009809670
2471-55131: RNCC: 3 | RNVC: 9

1 Jan 1960

3040-01-074-9653
Spur Gearshaft

010749653
12267240: RNCC: 3 | RNVC: 2
DAX12503: RNCC: 5 | RNVC: 2

11 Apr 1979

3040-01-074-5026
Shouldered Shaft

010745026
12286918: RNCC: 3 | RNVC: 2
3-140-425-01: RNCC: 5 | RNVC: 2

1 Apr 1979

3040-01-074-4161
Pawl

010744161
0N180633: RNCC: 3 | RNVC: 2

30 Mar 1979

3040-01-074-3742
Nonrotating Shaft Eye Bracket

010743742
12286587: RNCC: 3 | RNVC: 2
3-160-025-04: RNCC: 5 | RNVC: 2

30 Mar 1979

3040-01-074-1972
Clutch Control Lever Parts Kit

010741972
A42577: RNCC: 3 | RNVC: 2
A42577: RNCC: 5 | RNVC: 9
42577: RNCC: C | RNVC: 1

28 Mar 1979

3040-01-074-1220
Shouldered Shaft

010741220
70351-08206-041: RNCC: 3 | RNVC: 2

27 Mar 1979

3040-01-073-9857
Mechanical Drive Housing

010739857
12285054: RNCC: 3 | RNVC: 2

24 Mar 1979

3040-01-073-9723
Straight Shaft

010739723
12287895: RNCC: 3 | RNVC: 2
12274090: RNCC: 5 | RNVC: 9

24 Mar 1979

3040-01-073-9629
Shouldered Shaft

010739629
03061501: RNCC: 3 | RNVC: 2
69462: RNCC: 5 | RNVC: 9

23 Mar 1979

3040-01-073-8046
Control Cam

010738046
12267909: RNCC: 3 | RNVC: 2
DAX13039: RNCC: 5 | RNVC: 2

21 Mar 1979

3040-01-073-7993
Straight Shaft

010737993
12286009: RNCC: 3 | RNVC: 2
3-020-039X05: RNCC: 5 | RNVC: 2

21 Mar 1979

3040-01-073-7973
Rigid Connecting Link

010737973
12274702-1: RNCC: 3 | RNVC: 2
XM62820: RNCC: 5 | RNVC: 9
12274702: RNCC: D | RNVC: 9

21 Mar 1979

3040-01-073-7683
Rotating Shaft Eye Bracket

010737683
12274676: RNCC: 3 | RNVC: 2
XM65100: RNCC: 5 | RNVC: 9

21 Mar 1979

3040-01-073-7290
Mechanical Drive Housing

010737290
12266538: RNCC: 3 | RNVC: 2
6695-514: RNCC: 5 | RNVC: 9

21 Mar 1979

3040-01-073-6104
Gearshaft Assembly

010736104
7042M95G01: RNCC: 3 | RNVC: 2

18 Mar 1979

3040-01-073-5874
Linear Actuating Cylinder Assembly Parts Kit

010735874
5318-133: RNCC: 3 | RNVC: 2
5318-133: RNCC: 3 | RNVC: 2
5318-133: RNCC: C | RNVC: 1

17 Mar 1979

3040-01-073-4318
Shaft Retaining Plate

010734318
12267354: RNCC: 3 | RNVC: 2
DAX11494: RNCC: 5 | RNVC: 2

15 Mar 1979

3040-01-073-4334
Mechanical Drive Housing

010734334
12267910: RNCC: 3 | RNVC: 2
DAX13040: RNCC: 5 | RNVC: 2

15 Mar 1979

3040-01-073-4307
Straight Shaft

010734307
12267316: RNCC: 3 | RNVC: 2
DAX10981: RNCC: 5 | RNVC: 2

15 Mar 1979

3040-01-073-4257
Spur Gearshaft

010734257
12267218: RNCC: 3 | RNVC: 2
DAX11553: RNCC: 5 | RNVC: 2

15 Mar 1979

3040-01-073-4254
Shouldered Shaft

010734254
12267952: RNCC: 3 | RNVC: 2
DAX12163: RNCC: 5 | RNVC: 2

15 Mar 1979

3040-01-073-4095
Spur Gearshaft

010734095
12288004: RNCC: 3 | RNVC: 2
DAX13005: RNCC: 5 | RNVC: 2
12267906: RNCC: 5 | RNVC: 9

15 Mar 1979

3040-01-073-3169
Straight Shaft

010733169
12283186: RNCC: 3 | RNVC: 2

14 Mar 1979

3040-01-073-3058
Linear Actuating Cylinder Head

010733058
12283309: RNCC: 3 | RNVC: 2

14 Mar 1979

3040-01-073-0747
Spur Gearshaft

010730747
12267232: RNCC: 3 | RNVC: 2
12447: RNCC: 5 | RNVC: 2

8 Mar 1979

3040-01-073-0748
Spur Gearshaft

010730748
12267233: RNCC: 3 | RNVC: 2
DAX12451: RNCC: 5 | RNVC: 2

8 Mar 1979

3040-01-072-8149
Shaft Retaining Plate

010728149
12283254: RNCC: 3 | RNVC: 2

4 Mar 1979

3040-01-072-3111
Shouldered Shaft

010723111
12266378: RNCC: 3 | RNVC: 2
676983-3: RNCC: 5 | RNVC: 9
12266378: RNCC: 5 | RNVC: 9

28 Feb 1979

3040-01-072-2554
Linear Actuating Cylinder Piston Rod

010722554
2078991-1: RNCC: 3 | RNVC: 2

26 Feb 1979

3040-01-072-0307
Mechanical Drive Housing

010720307
8289227: RNCC: 3 | RNVC: 2
3040010720307: RNCC: 6 | RNVC: 9

21 Feb 1979

3040-01-071-8895
Linear Actuating Cylinder Assembly Parts Kit

010718895
5911216: RNCC: 3 | RNVC: 2

16 Feb 1979

3040-01-071-6448
Worm Wheel Gearshaft

010716448
SM-D-890298: RNCC: 3 | RNVC: 2
SM-D-890298: RNCC: 3 | RNVC: 2

13 Feb 1979

3040-00-974-9199
Rigid Connecting Link

009749199
8741918: RNCC: 3 | RNVC: 2
2520009749199: RNCC: 5 | RNVC: 9
2520009749199: RNCC: 6 | RNVC: 9

5 Oct 1966

3040-01-071-0670
Control Cam

010710670
12266830: RNCC: 3 | RNVC: 2

29 Jan 1979

3040-01-071-0671
Control Cam

010710671
12266829: RNCC: 3 | RNVC: 2

29 Jan 1979

3040-01-071-0669
Control Cam

010710669
12266332: RNCC: 3 | RNVC: 2
666784-1: RNCC: 5 | RNVC: 9
12266332: RNCC: 5 | RNVC: 9
12266332: RNCC: C | RNVC: 1

29 Jan 1979

3040-01-070-7912
Linear Actuating Cylinder Assembly

010707912
74868672: RNCC: 3 | RNVC: 2
4868672-9: RNCC: 5 | RNVC: 2
486872-9: RNCC: C | RNVC: 1
4814106: RNCC: D | RNVC: 9

19 Jan 1979

3040-01-070-7373
Rigid Connecting Link

010707373
16K0571-859: RNCC: 3 | RNVC: 2
3040PL0666039: RNCC: 6 | RNVC: 9

18 Jan 1979

3040-01-070-7022
Linear Actuating Cylinder Piston Rod

010707022
8J7375: RNCC: 3 | RNVC: 2

18 Jan 1979

3040-01-070-5122
Spur Gearshaft

010705122
42277-359: RNCC: 3 | RNVC: 2
42277-359: RNCC: 5 | RNVC: 9
42277D359: RNCC: 5 | RNVC: 9

12 Jan 1979

3040-01-070-4089
Worm Wheel Gearshaft

010704089
SM-B-890170: RNCC: 3 | RNVC: 2
SM-B-890170: RNCC: 5 | RNVC: 9

11 Jan 1979

3040-01-070-3759
Drive Shaft

010703759
SM-C-949550: RNCC: 3 | RNVC: 2

11 Jan 1979

3040-01-070-3763
Drive Shaft

010703763
SM-C-949551: RNCC: 3 | RNVC: 2

11 Jan 1979

3040-01-069-9561
Idler Pinion Shaft

010699561
755017A8333-2: RNCC: 3 | RNVC: 2

29 Dec 1978

3040-01-069-9564
Idler Pinion Shaft

010699564
755017A8333-1: RNCC: 3 | RNVC: 2
755017A8333: RNCC: 5 | RNVC: 9

29 Dec 1978

3040-01-069-9562
Bandswitch Drive Shaft

010699562
755017A4544: RNCC: 3 | RNVC: 2

29 Dec 1978

3040-01-069-9350
Push-Pull Control Assembly

010699350
520-BB-0038: RNCC: 3 | RNVC: 2
442344: RNCC: 5 | RNVC: 2
442344: RNCC: 5 | RNVC: 9
2337242: RNCC: D | RNVC: 9

29 Dec 1978

3040-01-069-8767
Switch Shaft

010698767
755017A4545: RNCC: 3 | RNVC: 2

28 Dec 1978

3040-01-069-8015
Straight Shaft

010698015
17586600: RNCC: 3 | RNVC: 2
175866: RNCC: 5 | RNVC: 9

23 Dec 1978

3040-01-069-6930
Body Hub

010696930
SM-C-890164: RNCC: 3 | RNVC: 2
SM-C-890164: RNCC: 3 | RNVC: 2

22 Dec 1978

3040-01-069-1676
Control Cam

010691676
03570600: RNCC: 3 | RNVC: 2
69451: RNCC: 5 | RNVC: 9

9 Dec 1978

3040-01-069-1150
Primary Drive Thrust Pad

010691150
51739: RNCC: 3 | RNVC: 9
S107219: RNCC: 5 | RNVC: 2

8 Dec 1978

3040-01-068-9709
Straight Shaft

010689709
4N0528: RNCC: 3 | RNVC: 2
4N528: RNCC: 5 | RNVC: 2

7 Dec 1978

3040-01-068-9707
Straight Shaft

010689707
4N0507: RNCC: 3 | RNVC: 2

7 Dec 1978

3040-01-068-8851
Linear Actuating Cylinder Assembly Parts Kit

010688851
639461: RNCC: 3 | RNVC: 2
C639461: RNCC: 5 | RNVC: 2
639461: RNCC: 5 | RNVC: 9

6 Dec 1978

3040-01-068-7170
Piston

010687170
7S4594: RNCC: 3 | RNVC: 2

1 Dec 1978

3040-01-068-7105
Linear Actuating Cylinder Piston

010687105
40-36020: RNCC: 3 | RNVC: 2
8K8469: RNCC: 3 | RNVC: 2

1 Dec 1978

3040-01-068-5372
Linear Actuating Cylinder Assembly

010685372
AHFS1/12X7NC5/8R: RNCC: 3 | RNVC: 2
1.50F3LLU14X7.00: RNCC: 3 | RNVC: 2
1.F3LL14X7.0: RNCC: 5 | RNVC: 9
1-1-2F3LL147: RNCC: 5 | RNVC: 9
1.5F3LL14X7: RNCC: 5 | RNVC: 9

27 Nov 1978

3040-01-068-3587
Push-Pull Control Assembly

010683587
183-U-TT-1-75: RNCC: 3 | RNVC: 2
S232489: RNCC: 3 | RNVC: 2
183-U-TT-1-75: RNCC: 5 | RNVC: 9

22 Nov 1978

3040-01-068-3048
Linear Actuating Cylinder Assembly

010683048
1.12USR16X3: RNCC: 3 | RNVC: 2
AD123652: RNCC: 5 | RNVC: 2
S-1-1/8-USS-3.0: RNCC: 5 | RNVC: 9
1.12US416X3: RNCC: 5 | RNVC: 9

19 Nov 1978

3040-00-967-4806
Shouldered Shaft

009674806
6035B: RNCC: 3 | RNVC: 9
6035B: RNCC: 5 | RNVC: 9
200113FPC56: RNCC: 5 | RNVC: 9
200113FPC: RNCC: 5 | RNVC: 9
200113FPC56: RNCC: 5 | RNVC: 9
200113FPC: RNCC: 5 | RNVC: 9
200113FPC: RNCC: 5 | RNVC: 9
200113FPC56: RNCC: 5 | RNVC: 9
6035B: RNCC: C | RNVC: 1
200113FPC56: RNCC: C | RNVC: 1

1 Jan 1962

3040-01-067-8011
Straight Shaft

010678011
4N0927: RNCC: 3 | RNVC: 2
4N927: RNCC: 5 | RNVC: 2

8 Nov 1978

3040-01-067-5673
Shouldered Shaft

010675673
1P9929: RNCC: 3 | RNVC: 2
IPD1P9929: RNCC: 5 | RNVC: 9

3 Nov 1978

3040-01-067-4561
Shouldered Shaft

010674561
11729562: RNCC: 3 | RNVC: 2

30 Oct 1978

3040-01-066-9316
Linear Actuating Cylinder Assembly

010669316
G101227: RNCC: 3 | RNVC: 2
G33771: RNCC: 5 | RNVC: 9
D52929: RNCC: 5 | RNVC: 9

21 Oct 1978

3040-01-066-7562
Shaft Retaining Plate

010667562
12266478: RNCC: 3 | RNVC: 2

18 Oct 1978

3040-01-066-7317
Nonrotating Shaft Eye Bracket

010667317
400587: RNCC: 3 | RNVC: 2
400587: RNCC: 5 | RNVC: 9

17 Oct 1978

3040-01-066-5873
Extension Shaft

010665873
384-1100-00: RNCC: 3 | RNVC: 2

13 Oct 1978

3040-01-066-5065
Shouldered Shaft

010665065
402841: RNCC: 3 | RNVC: 2
402841: RNCC: 5 | RNVC: 9

12 Oct 1978

3040-01-066-4988
Nonrotating Shaft Eye Bracket

010664988
400588: RNCC: 3 | RNVC: 2
400588: RNCC: 5 | RNVC: 9

12 Oct 1978

3040-01-066-2968
Shouldered Shaft

010662968
143406: RNCC: 3 | RNVC: 2
10395325: RNCC: 6 | RNVC: 9

6 Oct 1978

3040-01-065-9841
Assembly Brake

010659841
403296: RNCC: 3 | RNVC: 2
403296: RNCC: 5 | RNVC: 9

28 Sep 1978

3040-01-065-9020
Housing Assembly

010659020
719473: RNCC: 3 | RNVC: 2

27 Sep 1978

3040-01-065-8999
Rigid Connecting Link

010658999
32-19463-303: RNCC: 3 | RNVC: 2
32-19463-303: RNCC: 5 | RNVC: 2
32-19463-303: RNCC: 5 | RNVC: 2
32-19463-303: RNCC: 5 | RNVC: 2

26 Sep 1978

3040-01-065-7199
Linear Actuating Cylinder Assembly Parts Kit

010657199
5705040: RNCC: 3 | RNVC: 2
5705040: RNCC: 5 | RNVC: 2
5705040: RNCC: 5 | RNVC: 9

23 Sep 1978

3040-01-065-7024
Linear Actuating Cylinder Assembly

010657024
113923: RNCC: 3 | RNVC: 9
S216320: RNCC: 5 | RNVC: 2
WM-637-A3: RNCC: 5 | RNVC: 9

22 Sep 1978

3040-01-065-6532
Linear Actuating Cylinder Assembly

010656532
094-DP: RNCC: 3 | RNVC: 9
7756271: RNCC: 5 | RNVC: 9
7756271: RNCC: 7 | RNVC: 1

21 Sep 1978

3040-01-065-2186
Shouldered Shaft

010652186
A50514: RNCC: 3 | RNVC: 2

10 Sep 1978

3040-01-065-2187
Shouldered Shaft

010652187
654-720000-002: RNCC: 3 | RNVC: 2
654-720000-000: RNCC: D | RNVC: 9

10 Sep 1978

3040-01-065-0893
Shouldered Shaft

010650893
S93693: RNCC: 3 | RNVC: 2
B22086: RNCC: 5 | RNVC: 9

9 Sep 1978

3040-01-065-0659
Ball Joint

010650659
464222C1: RNCC: 3 | RNVC: 2
464222C1: RNCC: 5 | RNVC: 9

9 Sep 1978

3040-01-065-0038
Linear Actuating Cylinder Piston Rod

010650038
12012329: RNCC: 3 | RNVC: 2

7 Sep 1978

3040-01-064-9792
Ball Joint

010649792
462555C1: RNCC: 3 | RNVC: 2
462555C1: RNCC: 5 | RNVC: 9

7 Sep 1978

3040-01-064-8690
Fan Idler Shaft

010648690
281784C1: RNCC: 3 | RNVC: 2
281784C1: RNCC: 5 | RNVC: 9

4 Sep 1978

3040-01-064-6622
Bracket

010646622
8D7801: RNCC: 3 | RNVC: 2

30 Aug 1978

3040-01-064-2738
Straight Shaft

010642738
750484: RNCC: 3 | RNVC: 2
6880-48: RNCC: 5 | RNVC: 9

19 Aug 1978

3040-01-064-2047
Housing

010642047
8D8446: RNCC: 3 | RNVC: 2

19 Aug 1978

3040-01-064-1038
Straight Shaft

010641038
8D7798: RNCC: 3 | RNVC: 2

17 Aug 1978

3040-01-064-1042
Body Hub

010641042
1454372: RNCC: 3 | RNVC: 2
8D8543: RNCC: 5 | RNVC: 9
8X3688: RNCC: 5 | RNVC: 9

17 Aug 1978

3040-01-064-1043
Body Hub

010641043
8S9183: RNCC: 3 | RNVC: 2

17 Aug 1978

3040-01-064-1039
Straight Shaft

010641039
8M8652: RNCC: 3 | RNVC: 2

17 Aug 1978

3040-01-064-1036
Remote Control Lever

010641036
8D8449: RNCC: 3 | RNVC: 2

17 Aug 1978

3040-01-063-8185
Shouldered Shaft

010638185
38513-404 17030: RNCC: 3 | RNVC: 2
38513-404: RNCC: 5 | RNVC: 9

13 Aug 1978

3040-01-063-7711
Shouldered Shaft

010637711
12266580: RNCC: 3 | RNVC: 2
6695-613: RNCC: 5 | RNVC: 9
12266580: RNCC: 5 | RNVC: 9

13 Aug 1978

3040-01-063-5658
Linear Actuating Cylinder

010635658
12274495-1: RNCC: 3 | RNVC: 2
XM60287-1: RNCC: 5 | RNVC: 9

9 Aug 1978

3040-01-063-5291
Manual Control Lever

010635291
01104500: RNCC: 3 | RNVC: 2
926-16594: RNCC: 5 | RNVC: 2
NW16144: RNCC: 5 | RNVC: 2
44-15494: RNCC: 5 | RNVC: 9
15494: RNCC: 5 | RNVC: 9
6110C42-2157MOD: RNCC: 5 | RNVC: 9
16144: RNCC: C | RNVC: 1

8 Aug 1978

3040-01-063-5216
Counterbalance Weight

010635216
579-1006-13: RNCC: 3 | RNVC: 2
10163673: RNCC: 6 | RNVC: 9

8 Aug 1978

3040-01-063-2100
Linear Actuating Cylinder Assembly Parts Kit

010632100
5911250: RNCC: 3 | RNVC: 2

30 Jul 1978

3040-01-062-8073
Linear Actuating Cylinder

010628073
F11540-6: RNCC: 3 | RNVC: 9
H-F115406: RNCC: 5 | RNVC: 2
C3509: RNCC: 5 | RNVC: 2

22 Jul 1978

3040-01-062-5620
Control Cam

010625620
12266316: RNCC: 3 | RNVC: 2
12266316: RNCC: 5 | RNVC: 9

19 Jul 1978

3040-01-062-4051
Body Hub

010624051
286590: RNCC: 3 | RNVC: 9
0203916: RNCC: 5 | RNVC: 9
31351: RNCC: 5 | RNVC: 9

15 Jul 1978

3040-01-061-6990
Linear Actuating Cylinder Piston

010616990
375824: RNCC: 3 | RNVC: 2
375824: RNCC: 5 | RNVC: 9
372823: RNCC: C | RNVC: 1

27 Jun 1978

3040-00-959-8291
Shaft Collar

009598291
0360-5: RNCC: 3 | RNVC: 2
79407000907: RNCC: E | RNVC: 8

1 Jan 1962

3040-01-061-6108
Linear Actuating Cylinder

010616108
F11540-5: RNCC: 3 | RNVC: 9
568-F11540-5: RNCC: 5 | RNVC: 2
C3415: RNCC: 5 | RNVC: 2
F11540-5: RNCC: C | RNVC: 1

24 Jun 1978

3040-01-061-5215
Rigid Connecting Link

010615215
53G970720-171: RNCC: 3 | RNVC: 2

22 Jun 1978

3040-01-061-4257
Rigid Connecting Link

010614257
12253962: RNCC: 3 | RNVC: 2

20 Jun 1978

3040-01-061-3983
Steering Gear Shaft

010613983
5F6443: RNCC: 3 | RNVC: 2

20 Jun 1978

3040-01-061-3963
Steering Gear Shaft

010613963
8D6888: RNCC: 3 | RNVC: 2

20 Jun 1978

3040-01-060-9284
Linear Actuating Cylinder Assembly

010609284
74827392: RNCC: 3 | RNVC: 2
74827392-7: RNCC: 5 | RNVC: 9

7 Jun 1978

3040-01-060-8970
Shouldered Shaft

010608970
38513-405-17030: RNCC: 3 | RNVC: 2
38513-405: RNCC: 5 | RNVC: 9

4 Jun 1978

3040-01-060-8099
Linear Actuating Cylinder Piston

010608099
5J9072: RNCC: 3 | RNVC: 2

2 Jun 1978

3040-01-060-8095
Linear Actuating Cylinder

010608095
5J8335: RNCC: 3 | RNVC: 2

2 Jun 1978

3040-01-060-8094
Linear Actuating Cylinder Piston Rod

010608094
5J7945: RNCC: 3 | RNVC: 2

2 Jun 1978

3040-01-060-8091
Linear Actuating Cylinder

010608091
5J7915: RNCC: 3 | RNVC: 2

2 Jun 1978

3040-01-060-7084
Push-Pull Control Assembly

010607084
1656-6400047: RNCC: 3 | RNVC: 2
Q456568: RNCC: 3 | RNVC: 2
6400047: RNCC: 5 | RNVC: 9

28 May 1978

3040-01-060-7061
Control Cam

010607061
D627-2534-001: RNCC: 3 | RNVC: 2
D627-2534-001: RNCC: 5 | RNVC: 9

28 May 1978

3040-01-060-3998
Hub Clamp

010603998
756954-10: RNCC: 3 | RNVC: 2

20 May 1978

3040-01-060-0288
Flexible Shaft Assembly

010600288
S19082-601: RNCC: 3 | RNVC: 2
19082-601: RNCC: 5 | RNVC: 9

6 May 1978

3040-01-059-9481
Housing Adapter

010599481
2P-4358: RNCC: 3 | RNVC: 2
14KP695: RNCC: 7 | RNVC: 2

3 May 1978

3040-01-059-8817
Slip Ring

010598817
A202-5: RNCC: 3 | RNVC: 2

3 May 1978

3040-01-059-4310
Rigid Connecting Link

010594310
12254025: RNCC: 3 | RNVC: 2

12 Apr 1978

3040-01-059-3736
Lead Screw Shaft

010593736
5D2950: RNCC: 3 | RNVC: 2

10 Apr 1978

3040-01-058-1202
Control Cam

010581202
12266320: RNCC: 3 | RNVC: 2

23 Mar 1978

3040-01-058-1201
Control Cam

010581201
12266321: RNCC: 3 | RNVC: 2

23 Mar 1978

3040-01-057-6581
Lower Curtain Shoe

010576581
12266695: RNCC: 3 | RNVC: 2
6695-520: RNCC: 5 | RNVC: 9
6695-520: RNCC: 5 | RNVC: 9

17 Mar 1978

3040-01-057-6546
Worm Shaft

010576546
11741740: RNCC: 3 | RNVC: 2

17 Mar 1978

3040-00-954-2737
Shaft Collar

009542737
553238: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-01-056-6178
Push-Pull Control Assembly

010566178
74863737: RNCC: 3 | RNVC: 2
74863737-8: RNCC: 3 | RNVC: 2

25 Feb 1978

3040-01-056-5421
Multiple Gears Gearshaft

010565421
12266242: RNCC: 3 | RNVC: 2

25 Feb 1978

3040-01-056-2939
Linear Actuating Cylinder Assembly Parts Kit

010562939
LC651867: RNCC: 3 | RNVC: 2

19 Feb 1978

3040-01-056-1797
Straight Shaft

010561797
S214897: RNCC: 3 | RNVC: 2

17 Feb 1978

3040-01-055-9971
Shouldered Shaft

010559971
105D3932: RNCC: 3 | RNVC: 2
3040PL0664842: RNCC: 6 | RNVC: 9

15 Feb 1978

3040-01-055-8170
Mechanical Drive Housing

010558170
8924510: RNCC: 3 | RNVC: 2
5146903: RNCC: 5 | RNVC: 9

11 Feb 1978

3040-01-054-9979
Rigid Connecting Link

010549979
16P1106-1: RNCC: 3 | RNVC: 2
16P1106-1: RNCC: 5 | RNVC: 2

30 Jan 1978

3040-01-054-9730
Mechanical Drive Housing

010549730
12254215: RNCC: 3 | RNVC: 2

30 Jan 1978

3040-01-054-5718
Linear Actuating Cylinder Assembly

010545718
74881057: RNCC: 3 | RNVC: 2
4881057: RNCC: 3 | RNVC: 2
74881057-9: RNCC: 5 | RNVC: 2
74881057: RNCC: 5 | RNVC: 2
4881057-2: RNCC: 5 | RNVC: 2
7488057-9: RNCC: 5 | RNVC: 9

21 Jan 1978

3040-01-054-5591
Mechanical Drive Housing

010545591
12266611: RNCC: 3 | RNVC: 2
6695-681: RNCC: 5 | RNVC: 9

21 Jan 1978

3040-01-054-2160
Cam Roller Shoe

010542160
20117: RNCC: 3 | RNVC: 2

17 Jan 1978

3040-01-053-9509
Shaft Retaining Plate

010539509
7J5368: RNCC: 3 | RNVC: 2

13 Jan 1978

3040-00-951-3664
Shaft Collar

009513664
325495-1: RNCC: 3 | RNVC: 2
149497-3: RNCC: C | RNVC: 1
149497PC3: RNCC: C | RNVC: 1

4 May 1966

3040-01-053-7547
Rigid Connecting Link

010537547
14-13902-1: RNCC: 1 | RNVC: 2
6604-1: RNCC: 3 | RNVC: 2
SR10564A1: RNCC: 3 | RNVC: 9

10 Jan 1978

3040-01-053-7362
Draft Frame Shoe

010537362
5J2950: RNCC: 3 | RNVC: 2

10 Jan 1978

3040-00-950-9365
Shaft Collar

009509365
490D971H03: RNCC: 3 | RNVC: 2
490D971H03: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-01-053-4413
Shouldered Shaft

010534413
74007230: RNCC: 3 | RNVC: 2

5 Jan 1978

3040-01-053-4409
Nonrotating Shaft Eye Bracket

010534409
12265665: RNCC: 3 | RNVC: 2
676491-1: RNCC: 5 | RNVC: 9

5 Jan 1978

3040-01-053-3892
Spur Gearshaft

010533892
12266241: RNCC: 3 | RNVC: 2

5 Jan 1978

3040-01-053-3885
Straight Shaft

010533885
12277456: RNCC: 3 | RNVC: 9
12277456: RNCC: 5 | RNVC: 2

5 Jan 1978

3040-01-053-3875
Push-Pull Control Assembly

010533875
158276: RNCC: 3 | RNVC: 2
158276: RNCC: 5 | RNVC: 9

5 Jan 1978

3040-00-950-6008
Shaft Collar

009506008
490D971G01: RNCC: 3 | RNVC: 2
490D971G01: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-01-053-0566
Push-Pull Control Assembly

010530566
B48701 X 26.00: RNCC: 3 | RNVC: 2
13217E6815-3: RNCC: 3 | RNVC: 2
B48701 X 26.00: RNCC: 5 | RNVC: 9
13217E6815: RNCC: D | RNVC: 9

24 Dec 1977

3040-01-052-9047
Bell Crank

010529047
12266099: RNCC: 3 | RNVC: 2
12266099-301: RNCC: 5 | RNVC: 9

22 Dec 1977

3040-01-052-9054
Multiple Gears Gearshaft

010529054
12266243: RNCC: 3 | RNVC: 2

22 Dec 1977

3040-01-052-9041
Shaft Retaining Plate

010529041
12266331: RNCC: 3 | RNVC: 2

22 Dec 1977

3040-01-052-8921
Shouldered Shaft

010528921
12266193: RNCC: 3 | RNVC: 2

22 Dec 1977

3040-01-052-6990
Phase Adjust Shaft

010526990
708076-1: RNCC: 3 | RNVC: 2

19 Dec 1977

3040-01-052-6235
Straight Shaft

010526235
74037207-3: RNCC: 3 | RNVC: 2
74035455: RNCC: 5 | RNVC: 9
4035455: RNCC: D | RNVC: 9

16 Dec 1977

3040-01-052-6236
Straight Shaft

010526236
7045782: RNCC: 3 | RNVC: 2
J3209: RNCC: 5 | RNVC: 9

16 Dec 1977

3040-01-052-6023
Linear Actuating Cylinder Assembly Parts Kit

010526023
LC-654023: RNCC: 3 | RNVC: 2

16 Dec 1977

3040-01-052-6022
Linear Actuating Cylinder Assembly Parts Kit

010526022
C651769: RNCC: 3 | RNVC: 2
LC-651769: RNCC: 5 | RNVC: 9

16 Dec 1977

3040-01-052-4965
Rigid Connecting Link

010524965
12266210: RNCC: 3 | RNVC: 2

15 Dec 1977

3040-00-949-1732
Counterbalance Weight

009491732
528445CL4: RNCC: 3 | RNVC: 2
528445CL4: RNCC: 5 | RNVC: 2
528445CL4: RNCC: 5 | RNVC: 2
528445CL4: RNCC: 5 | RNVC: 9
528445A: RNCC: D | RNVC: 9

11 Apr 1966

3040-00-948-9753
Bell Crank

009489753
5J4574: RNCC: 3 | RNVC: 2

15 Apr 1966

3040-01-052-1986
Control Cam

010521986
12266601: RNCC: 3 | RNVC: 2
6695-668: RNCC: 5 | RNVC: 9
6695-668: RNCC: 5 | RNVC: 9

11 Dec 1977

3040-01-052-1076
Mechanical Drive Housing

010521076
12265877: RNCC: 3 | RNVC: 9
12265877: RNCC: C | RNVC: 1

10 Dec 1977

3040-01-052-0647
Bell Crank

010520647
218-24310-101: RNCC: 3 | RNVC: 2

9 Dec 1977

3040-01-051-9599
Linear Actuating Cylinder Assembly Parts Kit

010519599
4906396-8: RNCC: 3 | RNVC: 2
74906396: RNCC: 3 | RNVC: 2
4906396-9: RNCC: 5 | RNVC: 2

8 Dec 1977

3040-01-051-8406
Linear Actuating Cylinder Assembly Parts Kit

010518406
74908540: RNCC: 3 | RNVC: 2
4908540-0: RNCC: 5 | RNVC: 2

5 Dec 1977

3040-01-051-5656
Pivot Shaft

010515656
12266576: RNCC: 3 | RNVC: 2
6695-609: RNCC: 5 | RNVC: 9
12266576: RNCC: 5 | RNVC: 9

2 Dec 1977

3040-01-051-5389
Spur Gearshaft

010515389
12265871: RNCC: 3 | RNVC: 9
12265871: RNCC: 5 | RNVC: 2

2 Dec 1977

3040-01-051-5388
Spur Gearshaft

010515388
12265869: RNCC: 3 | RNVC: 9
12265869: RNCC: C | RNVC: 1

2 Dec 1977

3040-01-051-5375
Shouldered Shaft

010515375
12265874: RNCC: 3 | RNVC: 9
12265874: RNCC: C | RNVC: 1

2 Dec 1977

3040-01-051-0961
Remote Control Lever

010510961
12266595: RNCC: 3 | RNVC: 2
6695-660: RNCC: 5 | RNVC: 9
6695-660: RNCC: 5 | RNVC: 9

22 Nov 1977

3040-01-050-9768
Control Cam

010509768
12260105: RNCC: 3 | RNVC: 2

17 Nov 1977

3040-01-050-6876
Rigid Connecting Link

010506876
12255293: RNCC: 3 | RNVC: 2
12255293: RNCC: 5 | RNVC: 2

12 Nov 1977

3040-01-050-6439
Manual Control Lever

010506439
01100200: RNCC: 3 | RNVC: 2
1618257: RNCC: 5 | RNVC: 2
1618257: RNCC: 5 | RNVC: 9

12 Nov 1977

3040-00-946-9843
Counterbalance Weight

009469843
528445CL6: RNCC: 3 | RNVC: 2
528446CL6: RNCC: 5 | RNVC: 2
528446CL6: RNCC: 5 | RNVC: 2

18 Mar 1966

3040-00-946-9839
Counterbalance Weight

009469839
528445CL1: RNCC: 3 | RNVC: 2
528445CL1: RNCC: 5 | RNVC: 2
528445CL1: RNCC: 5 | RNVC: 9
528445A: RNCC: D | RNVC: 9

18 Mar 1966

3040-00-946-8025
Turbine Engine Counter Balance Weight

009468025
541154CL2: RNCC: 3 | RNVC: 2
541154CL2: RNCC: 5 | RNVC: 2
541154CL2: RNCC: 5 | RNVC: 9
541154C: RNCC: D | RNVC: 9

16 Mar 1966

3040-00-946-8024
Turbine Engine Counter Balance Weight

009468024
541154CL1: RNCC: 3 | RNVC: 2
541154CL1: RNCC: 5 | RNVC: 2
541154CL1: RNCC: 5 | RNVC: 9
541154C: RNCC: D | RNVC: 9

16 Mar 1966

3040-01-050-2038
Shouldered Shaft

010502038
12266011: RNCC: 3 | RNVC: 2

1 Nov 1977

3040-01-050-2036
Mechanical Drive Housing

010502036
12266008: RNCC: 3 | RNVC: 2
666764-1: RNCC: 5 | RNVC: 9
12266008: RNCC: 5 | RNVC: 9
12266008: RNCC: C | RNVC: 1

1 Nov 1977

3040-01-050-1666
Speedometer-Tachometer Drive Adapter

010501666
40-0003828: RNCC: 3 | RNVC: 2
40-0003828: RNCC: 5 | RNVC: 9

1 Nov 1977

3040-01-049-8763
Cmr Film Gate Shaft

010498763
348-1100-014-01: RNCC: 3 | RNVC: 2

28 Oct 1977

3040-01-049-8636
Link Assembly

010498636
53-650046-15: RNCC: 3 | RNVC: 2

28 Oct 1977

3040-01-049-8634
Link Assembly

010498634
53-650046-13: RNCC: 3 | RNVC: 2

28 Oct 1977

3040-01-049-8635
Link Assembly

010498635
53-650046-14: RNCC: 3 | RNVC: 2

28 Oct 1977

3040-01-049-8392
Link Assembly

010498392
53-650046-18: RNCC: 3 | RNVC: 2

27 Oct 1977

3040-01-049-8390
Link Assembly

010498390
53-650046-16: RNCC: 3 | RNVC: 2
53-650046-16: RNCC: 5 | RNVC: 2
53-650046-16: RNCC: 5 | RNVC: 2
53-650046-16: RNCC: 5 | RNVC: 2

27 Oct 1977

3040-01-049-8391
Link Assembly

010498391
53-650046-17: RNCC: 3 | RNVC: 2

27 Oct 1977

3040-00-946-1039
Turbine Engine Counter Balance Weight

009461039
528445CL5: RNCC: 3 | RNVC: 2
528445CL5: RNCC: 5 | RNVC: 2
528445CL5: RNCC: 5 | RNVC: 9
528445A: RNCC: D | RNVC: 9

7 Mar 1966

3040-00-945-5110
Shaft Collar

009455110
474465-1: RNCC: 3 | RNVC: 2
474465: RNCC: D | RNVC: 9

25 Feb 1966

3040-00-945-3872
Shaft Collar

009453872
7986742: RNCC: 3 | RNVC: 2

9 Mar 1966

3040-00-945-2641
Pawl

009452641
11486-1: RNCC: 3 | RNVC: 2

1 Mar 1966

3040-01-049-0172
Inner Wing Slat Pushrod Assembly

010490172
53G970720-167: RNCC: 3 | RNVC: 2
53G970720-1: RNCC: 5 | RNVC: 9

10 Oct 1977

3040-00-944-8260
Control Cam

009448260
704657-3: RNCC: 3 | RNVC: 2

16 Feb 1966

3040-01-048-8821
Linear Actuating Cylinder Assembly Parts Kit

010488821
KM3-63: RNCC: 3 | RNVC: 2
KM3-63: RNCC: 5 | RNVC: 9

7 Oct 1977

3040-00-944-5579
Counterbalance Weight

009445579
528445CL7: RNCC: 3 | RNVC: 2
528445CL7: RNCC: 5 | RNVC: 2
528445CL7: RNCC: 5 | RNVC: 9
528445A: RNCC: D | RNVC: 9

11 Feb 1966

3040-00-944-5537
Counterbalance Weight

009445537
541157CL3: RNCC: 3 | RNVC: 2

11 Feb 1966

3040-01-048-5629
Ball Joint

010485629
DC1209CN: RNCC: 3 | RNVC: 2

28 Sep 1977

3040-01-047-3620
Straight Shaft

010473620
204109: RNCC: 3 | RNVC: 2
B204109: RNCC: 5 | RNVC: 9
200113AJ PC695-4: RNCC: 5 | RNVC: 9

5 Sep 1977

3040-01-047-2374
Shaft Collar

010472374
D 4A 18A: RNCC: 3 | RNVC: 2

1 Sep 1977

3040-01-047-2192
Indicator Link

010472192
035-19023-Z: RNCC: 3 | RNVC: 2
035-190232: RNCC: 5 | RNVC: 9

1 Sep 1977

3040-01-047-1393
Shouldered Shaft

010471393
22321: RNCC: 3 | RNVC: 2
22321: RNCC: C | RNVC: 1

1 Sep 1977

3040-00-941-5825
Pawl

009415825
BUWEPSLD614472: RNCC: 3 | RNVC: 2
LD614472: RNCC: 3 | RNVC: 2
2121135: RNCC: 5 | RNVC: 2

3 Dec 1965

3040-00-941-5824
Pawl

009415824
BUWEPSLD614473: RNCC: 3 | RNVC: 2
LD614473: RNCC: 3 | RNVC: 2
2121136: RNCC: 5 | RNVC: 2

3 Dec 1965

3040-00-940-8056
Manual Control Lever

009408056
12269177: RNCC: 3 | RNVC: 2
10949811: RNCC: 5 | RNVC: 2
8756360: RNCC: C | RNVC: 1
10890714: RNCC: C | RNVC: 1

27 Nov 1965

3040-01-045-5614
Extension Shaft

010455614
CQ3: RNCC: 3 | RNVC: 2

4 Aug 1977

3040-01-045-3359
Shoe Type Brake

010453359
6737-5900: RNCC: 3 | RNVC: 2
73HD-0-410K: RNCC: 5 | RNVC: 9

29 Jul 1977

3040-01-045-0676
Rigid Connecting Link

010450676
14-13901-1: RNCC: 1 | RNVC: 2
SR10723S9: RNCC: 3 | RNVC: 2

26 Jul 1977

3040-01-044-6357
Pneumatic Accumulator

010446357
639AS1507: RNCC: 3 | RNVC: 2
588.10-200019-000: RNCC: 8 | RNVC: 2

17 Jul 1977

3040-01-044-2521
Main Shaft

010442521
08555-20003: RNCC: 3 | RNVC: 2
08555-20003-1: RNCC: 5 | RNVC: 2
A-08555-20003-1: RNCC: 5 | RNVC: 2
A-08555-20003-1: RNCC: 5 | RNVC: 9
08555-20003-1: RNCC: 5 | RNVC: 9
A-08555-20003-1: RNCC: 5 | RNVC: 9
08555-20003-1: RNCC: 5 | RNVC: 9
08555-20003: RNCC: C | RNVC: 1

9 Jul 1977

3040-01-044-2522
Range Shaft

010442522
5-110293: RNCC: 3 | RNVC: 9
5-11093: RNCC: 5 | RNVC: 2

9 Jul 1977

3040-01-043-9536
Rigid Connecting Link

010439536
16M222-1: RNCC: 3 | RNVC: 2
3040PL0664102: RNCC: 6 | RNVC: 9

2 Jul 1977

3040-01-043-9534
Rigid Connecting Link

010439534
CA68463-001: RNCC: 3 | RNVC: 2
39-2199-8: RNCC: 5 | RNVC: 2
39-2199-8: RNCC: 5 | RNVC: 2
39-2199-8: RNCC: 5 | RNVC: 2
39-2199-8: RNCC: 5 | RNVC: 2
39-2199-8: RNCC: 5 | RNVC: 2
39-2199-8: RNCC: 5 | RNVC: 2
39-2199-8: RNCC: 5 | RNVC: 2
39-2199-8: RNCC: 5 | RNVC: 2
16M033-1: RNCC: 5 | RNVC: 9

2 Jul 1977

3040-00-938-0635
Shaft Collar

009380635
340MAJ1: RNCC: 3 | RNVC: 2
340MAJ1: RNCC: 3 | RNVC: 9

10 Mar 1967

3040-01-043-7675
Linear Actuating Cylinder Assembly Parts Kit

010437675
RC426K: RNCC: 3 | RNVC: 2
R426K: RNCC: 5 | RNVC: 9

1 Jul 1977

3040-00-936-8686
Shaft Collar

009368686
183047-710: RNCC: 3 | RNVC: 9
183047-710: RNCC: 5 | RNVC: 9
183047-710: RNCC: 5 | RNVC: 9
183077PC710: RNCC: 5 | RNVC: 9
183077PC710: RNCC: 5 | RNVC: 9
183077PC710: RNCC: 5 | RNVC: 9
183047-710: RNCC: C | RNVC: 1
183077PC710: RNCC: C | RNVC: 1
183047-710: RNCC: C | RNVC: 1
183077PC710: RNCC: C | RNVC: 1

10 Mar 1967

3040-01-041-3325
Body Hub

010413325
1020B0554: RNCC: 3 | RNVC: 9

22 May 1977

3040-01-041-3324
Body Hub

010413324
1020B0525: RNCC: 3 | RNVC: 9

22 May 1977

Load More Results