What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 154 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 154 of 300

3040-01-175-7724
Water Brake Housing

011757724
LTCT23665-01: RNCC: 3 | RNVC: 2
LTCT23665: RNCC: D | RNVC: 9

5 Apr 1984

3040-01-116-8154
Shaft Collar

011168154
10548468: RNCC: 3 | RNVC: 2

3 Aug 1981

3040-01-175-6502
Rigid Connecting Link

011756502
21196: RNCC: 3 | RNVC: 9
R30812: RNCC: D | RNVC: 9

3 Apr 1984

3040-01-175-6498
Nonrotating Shaft Eye Bracket

011756498
GD-DSIII: RNCC: 3 | RNVC: 2
102-8705: RNCC: 3 | RNVC: 2
CV125714: RNCC: 5 | RNVC: 2
4V-0612: RNCC: 5 | RNVC: 2
4V0612: RNCC: 5 | RNVC: 9
4V612: RNCC: D | RNVC: 9

3 Apr 1984

3040-01-175-6484
Linear Actuating Cylinder

011756484
8J6381: RNCC: 3 | RNVC: 2

3 Apr 1984

3040-01-175-6470
Linear Actuating Cylinder Piston Rod

011756470
8J6668: RNCC: 3 | RNVC: 2

3 Apr 1984

3040-01-175-6469
Linear Actuating Cylinder Piston Rod

011756469
6-768-001631: RNCC: 3 | RNVC: 2

3 Apr 1984

3040-01-175-5224
Door Latch Shaft

011755224
D72728: RNCC: 3 | RNVC: 2

1 Apr 1984

3040-01-116-4760
Push-Pull Control Assembly

011164760
51383-1: RNCC: 3 | RNVC: 9

28 Jul 1981

3040-01-175-4230
Hydraulic Accumulator

011754230
800102: RNCC: 3 | RNVC: 2
14971-007-00: RNCC: 7 | RNVC: 2

30 Mar 1984

3040-01-116-2612
Piston Rod

011162612
673006: RNCC: 3 | RNVC: 9
307NC6562: RNCC: 5 | RNVC: 2
673006: RNCC: 5 | RNVC: 9
307NC6562: RNCC: 5 | RNVC: 9
307NB6439: RNCC: C | RNVC: 1
NH-7052 PIECE 307: RNCC: C | RNVC: 1
673006: RNCC: C | RNVC: 1
307NC6562: RNCC: C | RNVC: 1
307NC6562: RNCC: C | RNVC: 1
673006: RNCC: C | RNVC: 1

24 Jul 1981

3040-01-175-1957
Manual Control Lever

011751957
5362173: RNCC: 3 | RNVC: 2
3216458: RNCC: 3 | RNVC: 2
5362173: RNCC: 5 | RNVC: 9
3216458: RNCC: 5 | RNVC: 9

27 Mar 1984

3040-01-175-1156
Straight Shaft

011751156
24454-32501: RNCC: 3 | RNVC: 2
24454-32091: RNCC: 5 | RNVC: 9

27 Mar 1984

3040-01-115-9854
Mechanical Equipment Seal Replacement Parts Kit

011159854
2TH81: RNCC: 3 | RNVC: 2
10206: RNCC: 3 | RNVC: 2
2TH81: RNCC: 5 | RNVC: 9

17 Jul 1981

3040-01-174-9464
Linear Actuating Cylinder Assembly

011749464
7-372-003311: RNCC: 3 | RNVC: 2
1120504-1.25-122: RNCC: 5 | RNVC: 9
7372001317: RNCC: 5 | RNVC: 9
B7-372-001317: RNCC: 5 | RNVC: 9
7-732-001317: RNCC: C | RNVC: 1
2623-702: RNCC: C | RNVC: 1

24 Mar 1984

3040-01-174-9341
Nonrotating Shaft Eye Bracket

011749341
22216-10262: RNCC: 3 | RNVC: 2

24 Mar 1984

3040-01-174-6200
Linear Actuating Cylinder Cap

011746200
2G9098: RNCC: 3 | RNVC: 2

21 Mar 1984

3040-01-174-6201
Linear Actuating Cylinder Piston

011746201
3G8076: RNCC: 3 | RNVC: 2

21 Mar 1984

3040-01-174-6001
Nonrotating Shaft Eye Bracket

011746001
6G4968: RNCC: 3 | RNVC: 2

21 Mar 1984

3040-01-174-5968
Manual Control Lever

011745968
3216464: RNCC: 3 | RNVC: 2
J3216464: RNCC: 5 | RNVC: 2
3216464: RNCC: 5 | RNVC: 9

21 Mar 1984

3040-01-174-5834
Rigid Connecting Link

011745834
7-318000178: RNCC: 3 | RNVC: 2
7-318000178: RNCC: 5 | RNVC: 9

21 Mar 1984

3040-01-174-4796
Rigid Connecting Link

011744796
7598-6336: RNCC: 3 | RNVC: 2

19 Mar 1984

3040-01-174-4794
Rigid Connecting Link

011744794
7598-6328: RNCC: 3 | RNVC: 2
LE162-0013-6328: RNCC: 7 | RNVC: 2

19 Mar 1984

3040-01-174-4372
Friction Lining

011744372
1010-121: RNCC: 3 | RNVC: 2

17 Mar 1984

3040-01-174-4306
Gun Mount Shaft

011744306
2531294: RNCC: 3 | RNVC: 2

17 Mar 1984

3040-01-174-4171
Shaft Retaining Plate

011744171
1891925: RNCC: 3 | RNVC: 2
1891925: RNCC: 5 | RNVC: 9

17 Mar 1984

3040-01-174-2286
Shouldered Shaft

011742286
4115165: RNCC: 3 | RNVC: 2

16 Mar 1984

3040-01-174-1426
Shaft Retaining Plate

011741426
24084: RNCC: 3 | RNVC: 2

14 Mar 1984

3040-01-174-1064
Push-Pull Control Assembly

011741064
A7061-010: RNCC: 3 | RNVC: 2
B048701-0000-108.0: RNCC: 3 | RNVC: 9
B04870-0000-108.0: RNCC: 5 | RNVC: 9
B048701-0000-108.0: RNCC: 5 | RNVC: 9

14 Mar 1984

3040-01-174-0219
Planetary Gea Plate

011740219
91841-991: RNCC: 3 | RNVC: 9
60.08.119: RNCC: 5 | RNVC: 9
3536928-628: RNCC: 5 | RNVC: 9

14 Mar 1984

3040-01-173-9761
Manual Control Lever

011739761
82A5027A1245: RNCC: 3 | RNVC: 2

13 Mar 1984

3040-01-173-9346
Spur Gearshaft

011739346
91858-991: RNCC: 3 | RNVC: 9
353 6928 614: RNCC: 5 | RNVC: 2
353 6928 614: RNCC: 5 | RNVC: 2
353 6928 614: RNCC: 5 | RNVC: 9
60.08.104: RNCC: 5 | RNVC: 9
3536928-652: RNCC: 5 | RNVC: 9

12 Mar 1984

3040-01-173-9345
Control Cam

011739345
1152770858: RNCC: 3 | RNVC: 2
4536226-825: RNCC: 3 | RNVC: 9
1152770858: RNCC: 5 | RNVC: 9

12 Mar 1984

3040-01-173-9317
Rigid Connecting Link

011739317
1155450142: RNCC: 3 | RNVC: 2
4536226-652: RNCC: 3 | RNVC: 9
1155450142: RNCC: 5 | RNVC: 9

12 Mar 1984

3040-01-113-8898
Friction Lining

011138898
8-0003-001: RNCC: 3 | RNVC: 2
8-003-102-01: RNCC: 3 | RNVC: 9
N1190A REV G1 PC. NO.3: RNCC: 5 | RNVC: 9
8-003-102-1: RNCC: C | RNVC: 1
N1190A REV G1 P: RNCC: C | RNVC: 1

6 Jun 1981

3040-01-173-4264
Mechanical Drive Housing

011734264
6G1908: RNCC: 3 | RNVC: 2

5 Mar 1984

3040-01-173-4185
Shouldered Shaft

011734185
340-060: RNCC: 3 | RNVC: 2
A-54739: RNCC: 5 | RNVC: 2

5 Mar 1984

3040-01-173-4086
Linear Actuating Cylinder Assembly Parts Kit

011734086
9-752-100163: RNCC: 3 | RNVC: 2

5 Mar 1984

3040-01-172-7909
Hub Clamp

011727909
91141-991: RNCC: 3 | RNVC: 9
100400404: RNCC: 5 | RNVC: 9
2536189-607: RNCC: 5 | RNVC: 9

24 Feb 1984

3040-01-172-7571
Shouldered Shaft

011727571
82A5027A1242: RNCC: 3 | RNVC: 2

24 Feb 1984

3040-01-172-6824
Spur Gearshaft

011726824
24091: RNCC: 3 | RNVC: 2

24 Feb 1984

3040-01-172-5795
Manual Control Lever

011725795
M-200: RNCC: 3 | RNVC: 2
2-16 10763: RNCC: 5 | RNVC: 2
2-1763: RNCC: 5 | RNVC: 2

22 Feb 1984

3040-01-172-3719
Rigid Connecting Link

011723719
70400-02154-048: RNCC: 3 | RNVC: 2

20 Feb 1984

3040-01-172-3076
Remote Control Lever

011723076
5T2580: RNCC: 3 | RNVC: 2

18 Feb 1984

3040-01-172-3025
Rigid Connecting Link

011723025
3G8427: RNCC: 3 | RNVC: 2

18 Feb 1984

3040-01-172-2708
Straight Shaft

011722708
6G2947: RNCC: 3 | RNVC: 2

18 Feb 1984

3040-01-172-0744
Spur Gearshaft

011720744
6-810-001611: RNCC: 3 | RNVC: 9
6-810-001611: RNCC: 5 | RNVC: 2

15 Feb 1984

3040-01-172-0633
Linear Actuating Cylinder Assembly Parts Kit

011720633
AR96499: RNCC: 3 | RNVC: 2

15 Feb 1984

3040-01-172-0632
Linear Actuating Cylinder Assembly Parts Kit

011720632
AR96513: RNCC: 3 | RNVC: 2

15 Feb 1984

3040-01-171-8270
Control Cam

011718270
4537800-150: RNCC: 3 | RNVC: 9
6210770009: RNCC: 5 | RNVC: 2
6210770009: RNCC: 5 | RNVC: 9

14 Feb 1984

3040-01-171-8272
Mechanical Drive Housing

011718272
13211E8713: RNCC: 3 | RNVC: 2

14 Feb 1984

3040-01-171-8262
Rigid Connecting Link

011718262
6170700875: RNCC: 3 | RNVC: 2
4537800-252: RNCC: 3 | RNVC: 9
6170700875: RNCC: 5 | RNVC: 9

14 Feb 1984

3040-01-171-5081
Control Cam

011715081
24078: RNCC: 3 | RNVC: 9

8 Feb 1984

3040-01-171-3744
Counterbalance Weight

011713744
339139: RNCC: 3 | RNVC: 2

7 Feb 1984

3040-01-171-3357
Lever Guide

011713357
6P5208: RNCC: 3 | RNVC: 2

6 Feb 1984

3040-01-171-3179
Straight Shaft

011713179
T12787: RNCC: 3 | RNVC: 9

5 Feb 1984

3040-01-171-2473
Shouldered Shaft

011712473
5-45-5259: RNCC: 3 | RNVC: 9
26528-1: RNCC: 5 | RNVC: 9

4 Feb 1984

3040-01-171-2375
Linear Actuating Cylinder Assembly

011712375
12322558: RNCC: 3 | RNVC: 2

4 Feb 1984

3040-01-171-0142
Mechanical Drive Housing

011710142
13211E8702: RNCC: 3 | RNVC: 2

1 Feb 1984

3040-01-170-9840
Mechanical Drive Housing

011709840
2G6695: RNCC: 3 | RNVC: 2

1 Feb 1984

3040-01-170-6783
Mechanical Drive Housing

011706783
SC-B-84445: RNCC: 3 | RNVC: 2
A9300: RNCC: 5 | RNVC: 2
SC-B-84445: RNCC: 5 | RNVC: 9

27 Jan 1984

3040-01-170-5401
Control Cam

011705401
J4487711: RNCC: 3 | RNVC: 2
4487711: RNCC: 5 | RNVC: 9
4487711: RNCC: 5 | RNVC: 9

26 Jan 1984

3040-01-170-2579
Remote Control Lever

011702579
C52-11218-15151: RNCC: 3 | RNVC: 2
24453-70212: RNCC: D | RNVC: 9

22 Jan 1984

3040-01-170-2537
Mechanical Drive Housing

011702537
9230132: RNCC: 3 | RNVC: 9

22 Jan 1984

3040-01-170-2460
Straight Shaft

011702460
02205-3020: RNCC: 3 | RNVC: 2
2205-3020: RNCC: 3 | RNVC: 2
02205-3020: RNCC: 5 | RNVC: 9
2205-3020: RNCC: 5 | RNVC: 9

22 Jan 1984

3040-01-170-2006
Friction Lining

011702006
400016: RNCC: 3 | RNVC: 2

20 Jan 1984

3040-01-170-1320
Brake Band And Lining

011701320
10239: RNCC: 3 | RNVC: 2

20 Jan 1984

3040-01-170-1184
Key Shaft

011701184
1069-12-3: RNCC: 3 | RNVC: 2

20 Jan 1984

3040-01-170-0839
Remote Control Lever

011700839
C52-11218-25151: RNCC: 3 | RNVC: 2
24453-70202: RNCC: D | RNVC: 9

19 Jan 1984

3040-01-169-9724
Rigid Connecting Link

011699724
10869577: RNCC: 3 | RNVC: 2
10869573: RNCC: 5 | RNVC: 9
10869578: RNCC: D | RNVC: 9

18 Jan 1984

3040-01-169-9694
Straight Shaft

011699694
8D5896: RNCC: 3 | RNVC: 2

18 Jan 1984

3040-01-169-9692
Straight Shaft

011699692
6G7746: RNCC: 3 | RNVC: 2

18 Jan 1984

3040-01-169-8737
Linear Actuating Cylinder Piston

011698737
PT203263-1: RNCC: 3 | RNVC: 2
PT203263-1: RNCC: 5 | RNVC: 9
PT203263-1: RNCC: 5 | RNVC: 9
PT203263-1: RNCC: 5 | RNVC: 9

17 Jan 1984

3040-01-169-8672
Straight Shaft

011698672
2G7309: RNCC: 3 | RNVC: 2

17 Jan 1984

3040-01-169-8387
Mechanical Drive Housing

011698387
3160999: RNCC: 3 | RNVC: 2
3086360: RNCC: 5 | RNVC: 9
209768: RNCC: 5 | RNVC: 9

16 Jan 1984

3040-01-107-9982
Mechanical Drive Housing

011079982
12265895-1: RNCC: 3 | RNVC: 2
12265895: RNCC: 3 | RNVC: 2

19 Feb 1981

3040-01-169-2560
Spindle And Insert

011692560
755242-5: RNCC: 3 | RNVC: 2
755242-3: RNCC: 5 | RNVC: 9
755242-5: RNCC: 5 | RNVC: 9
755242-5: RNCC: 5 | RNVC: 9
755242-2: RNCC: E | RNVC: 8

5 Jan 1984

3040-01-169-1991
Remote Control Lever

011691991
6G1148: RNCC: 3 | RNVC: 2
293255: RNCC: 5 | RNVC: 9

4 Jan 1984

3040-01-169-1985
Linear Actuating Cylinder

011691985
9J3465: RNCC: 3 | RNVC: 2

4 Jan 1984

3040-01-169-1982
Mechanical Drive Housing

011691982
5T4055: RNCC: 3 | RNVC: 2

4 Jan 1984

3040-01-168-9872
Linear Actuating Cylinder Piston

011689872
C284005A5: RNCC: 3 | RNVC: 2
10510636: RNCC: 3 | RNVC: 2

30 Dec 1983

3040-01-168-8176
Mechanical Drive Housing

011688176
5188594: RNCC: 3 | RNVC: 2
5188594: RNCC: 5 | RNVC: 2

27 Dec 1983

3040-01-168-7619
Nonrotating Shaft Eye Bracket

011687619
6G5279: RNCC: 3 | RNVC: 2

22 Dec 1983

3040-01-168-6844
Body Hub

011686844
38545-001 13055: RNCC: 3 | RNVC: 2
38545-001: RNCC: 5 | RNVC: 9

21 Dec 1983

3040-01-168-6421
Shouldered Shaft

011686421
8D7427: RNCC: 3 | RNVC: 2

21 Dec 1983

3040-01-168-4338
Control Cam

011684338
2944586: RNCC: 3 | RNVC: 2
2944586: RNCC: 5 | RNVC: 2

17 Dec 1983

3040-01-168-4220
Mechanical Drive Housing

011684220
91838-991: RNCC: 3 | RNVC: 9
3536928-623: RNCC: 5 | RNVC: 9
60.08.223: RNCC: 5 | RNVC: 9

17 Dec 1983

3040-01-168-4219
Spur Gearshaft

011684219
91826-991: RNCC: 3 | RNVC: 9
3536928-606: RNCC: 5 | RNVC: 9
60.08.144: RNCC: 5 | RNVC: 9

17 Dec 1983

3040-01-168-4203
Rigid Connecting Link

011684203
91824-991: RNCC: 3 | RNVC: 9
60.08.251: RNCC: 5 | RNVC: 9
3536928-604: RNCC: 5 | RNVC: 9

17 Dec 1983

3040-01-168-4123
Gear Housing Cover

011684123
91829-991: RNCC: 3 | RNVC: 9
60.08.289: RNCC: 5 | RNVC: 9
3536928-609: RNCC: 5 | RNVC: 9

17 Dec 1983

3040-01-168-3542
Disk Brake Shoe

011683542
BH-1218: RNCC: 3 | RNVC: 2
10729701: RNCC: 3 | RNVC: 2
BH1218: RNCC: 5 | RNVC: 9

15 Dec 1983

3040-01-168-2386
Shouldered Shaft

011682386
C460919: RNCC: 3 | RNVC: 9
460919: RNCC: 5 | RNVC: 9

14 Dec 1983

3040-01-168-2139
Nonrotating Shaft Eye Bracket

011682139
9D9665: RNCC: 3 | RNVC: 2

14 Dec 1983

3040-01-168-0812
Shouldered Shaft

011680812
65015121-000: RNCC: 3 | RNVC: 2

12 Dec 1983

3040-01-167-9932
Speedometer-Tachometer Drive Adapter

011679932
695466: RNCC: 3 | RNVC: 9
695466: RNCC: C | RNVC: 1

9 Dec 1983

3040-01-167-9214
Linear Actuating Cylinder Head

011679214
8J0119: RNCC: 3 | RNVC: 2
8J119: RNCC: 5 | RNVC: 9

8 Dec 1983

3040-01-167-9144
Linear Actuating Cylinder Assembly Parts Kit

011679144
1038Z117: RNCC: 3 | RNVC: 2
KC1501-9010: RNCC: 5 | RNVC: 2

8 Dec 1983

3040-01-167-7970
Cylinder Assembly

011677970
CS2301-2023: RNCC: 3 | RNVC: 2
2023.950: RNCC: D | RNVC: 9

6 Dec 1983

3040-01-167-7959
Shouldered Shaft

011677959
8J6296: RNCC: 3 | RNVC: 2

6 Dec 1983

3040-01-167-7074
Straight Shaft

011677074
9D8852: RNCC: 3 | RNVC: 2

3 Dec 1983

3040-01-167-6585
Straight Shaft

011676585
2046360-1: RNCC: 3 | RNVC: 2
2046360-1: RNCC: 3 | RNVC: 2
2046360-1: RNCC: 5 | RNVC: 2
10106965: RNCC: 6 | RNVC: 9

3 Dec 1983

3040-01-167-6586
Straight Shaft

011676586
11829327: RNCC: 3 | RNVC: 2

3 Dec 1983

3040-01-167-4498
Shaft Retaining Plate

011674498
2V7092: RNCC: 3 | RNVC: 2

29 Nov 1983

3040-01-167-4311
Body Hub

011674311
216388-1: RNCC: 3 | RNVC: 2

29 Nov 1983

3040-01-167-4312
Actuator

011674312
216267-1: RNCC: 3 | RNVC: 2
216267-1: RNCC: C | RNVC: 1

29 Nov 1983

3040-01-167-2873
Linear Actuating Cylinder Assembly Parts Kit

011672873
666-2331-07: RNCC: 3 | RNVC: 2
5505-34: RNCC: 5 | RNVC: 2
666-2331-07: RNCC: 5 | RNVC: 9

24 Nov 1983

3040-01-167-2082
Manual Control Lever

011672082
353 6061-801: RNCC: 3 | RNVC: 2
3536061-801: RNCC: 5 | RNVC: 9
91639-991: RNCC: 5 | RNVC: 9

23 Nov 1983

3040-01-167-2038
Shouldered Shaft

011672038
2536046-001: RNCC: 3 | RNVC: 9
2536046-001: RNCC: 5 | RNVC: 2
91099-991: RNCC: 5 | RNVC: 9
445-9713: RNCC: 6 | RNVC: 9

23 Nov 1983

3040-01-167-1743
Gear Housing Flange

011671743
90057-991: RNCC: 3 | RNVC: 9
1536131-801: RNCC: 5 | RNVC: 9
452-0978: RNCC: 6 | RNVC: 9

23 Nov 1983

3040-01-167-1422
Pawl

011671422
502591-01: RNCC: 3 | RNVC: 9
502591-01: RNCC: 5 | RNVC: 2
502591-01: RNCC: 5 | RNVC: 2
502591-01: RNCC: 5 | RNVC: 2

22 Nov 1983

3040-01-166-9052
Fuel Gearshaft Assy

011669052
6899156: RNCC: 3 | RNVC: 2

19 Nov 1983

3040-01-166-8892
Rigid Connecting Link

011668892
14407-1: RNCC: 3 | RNVC: 2

18 Nov 1983

3040-01-166-8735
Linear Actuating Cylinder Assembly Parts Kit

011668735
CS1501-2668: RNCC: 3 | RNVC: 2

18 Nov 1983

3040-01-166-6354
Core Assembly Shaft

011666354
N7278: RNCC: 3 | RNVC: 2
10505980: RNCC: 7 | RNVC: 2

15 Nov 1983

3040-01-166-6016
Mechanical Drive Housing

011666016
90030-991: RNCC: 3 | RNVC: 2
90030-991: RNCC: 5 | RNVC: 9
1536077-801: RNCC: 5 | RNVC: 9

15 Nov 1983

3040-01-166-6013
Spur Gearshaft

011666013
90034-991: RNCC: 3 | RNVC: 2
90034-991: RNCC: 3 | RNVC: 9
1536083-001: RNCC: 5 | RNVC: 2
1536083-001: RNCC: 5 | RNVC: 9
445-9711: RNCC: 6 | RNVC: 9

15 Nov 1983

3040-01-166-6017
Mechanical Drive Housing

011666017
90029-991: RNCC: 3 | RNVC: 2
90029-991: RNCC: 5 | RNVC: 9
1536076-801: RNCC: 5 | RNVC: 9

15 Nov 1983

3040-01-166-6012
Bevel Gearshaft

011666012
1536080-001: RNCC: 3 | RNVC: 9
458-8586: RNCC: 6 | RNVC: 9

15 Nov 1983

3040-01-166-4497
Rigid Connecting Link

011664497
336926: RNCC: 3 | RNVC: 2
336926: RNCC: 5 | RNVC: 9

11 Nov 1983

3040-01-166-4495
Bell Crank

011664495
90RC16: RNCC: 3 | RNVC: 2

11 Nov 1983

3040-01-166-4461
Straight Shaft

011664461
8561-516-37013-246AND370306: RNCC: 3 | RNVC: 2
4-583028-3: RNCC: 5 | RNVC: 2
8561-295-37013-246AND370306: RNCC: 5 | RNVC: 9
370306: RNCC: D | RNVC: 9

11 Nov 1983

3040-01-166-3086
Speedometer-Tachometer Drive Adapter

011663086
1565208: RNCC: 3 | RNVC: 2
1565208: RNCC: 3 | RNVC: 9

9 Nov 1983

3040-01-166-2391
Remote Control Lever

011662391
10505878: RNCC: 3 | RNVC: 2

9 Nov 1983

3040-01-166-2276
Counterbalance Weight

011662276
A334A175-115: RNCC: 3 | RNVC: 2

9 Nov 1983

3040-01-166-1356
Rigid Connecting Link

011661356
3637619: RNCC: 3 | RNVC: 2

8 Nov 1983

3040-01-166-1107
Straight Shaft

011661107
11829328: RNCC: 3 | RNVC: 2

8 Nov 1983

3040-01-165-9549
Linear Actuating Cylinder Assembly Parts Kit

011659549
5318-121: RNCC: 3 | RNVC: 2

5 Nov 1983

3040-01-165-7885
Mechanical Drive Housing

011657885
14071952: RNCC: 3 | RNVC: 2
14071952: RNCC: 5 | RNVC: 9

4 Nov 1983

3040-01-165-7003
Linear Actuating Cylinder Assembly

011657003
13222E8985: RNCC: 3 | RNVC: 2
13222E8985: RNCC: 5 | RNVC: 2

3 Nov 1983

3040-01-165-6100
Linear Actuating Cylinder

011656100
300748: RNCC: 3 | RNVC: 2
300748: RNCC: 5 | RNVC: 9

31 Oct 1983

3040-01-165-5901
Shouldered Shaft

011655901
21148: RNCC: 3 | RNVC: 2
21615 ITEM 3: RNCC: 5 | RNVC: 2
21615: RNCC: D | RNVC: 9

31 Oct 1983

3040-01-165-4562
Nonrotating Shaft Eye Bracket

011654562
6271341: RNCC: 3 | RNVC: 2
6271341: RNCC: 5 | RNVC: 9

29 Oct 1983

3040-01-165-1555
Flexible Shaft Assembly Core

011651555
M10215-1F420: RNCC: 2 | RNVC: 2
MIL-DTL-10215: RNCC: 4 | RNVC: 1
MS51072-20: RNCC: 5 | RNVC: 9

26 Oct 1983

3040-01-165-1508
Nonvehicular Propeller Shaft

011651508
20-1047: RNCC: 3 | RNVC: 2
77C719687: RNCC: 7 | RNVC: 1

26 Oct 1983

3040-01-165-1067
Counterbalance Weight

011651067
7-211412024-3: RNCC: 3 | RNVC: 2
7-211412024-3: RNCC: 5 | RNVC: 9

26 Oct 1983

3040-01-165-0188
Shaft Collar

011650188
1385607: RNCC: 3 | RNVC: 2
1385607: RNCC: 5 | RNVC: 9

24 Oct 1983

3040-01-164-9293
Gear Stop

011649293
638-4679-001: RNCC: 3 | RNVC: 2

22 Oct 1983

3040-01-164-8724
Manual Control Lever

011648724
SM-B-561819-1: RNCC: 3 | RNVC: 2

21 Oct 1983

3040-01-164-8436
Shouldered Shaft

011648436
406-040-517-101: RNCC: 3 | RNVC: 2

21 Oct 1983

3040-01-164-7938
Rigid Connecting Link

011647938
9L5134: RNCC: 3 | RNVC: 2

21 Oct 1983

3040-01-164-7841
Bell Crank Assembly

011647841
2P6001: RNCC: 3 | RNVC: 2

21 Oct 1983

3040-01-164-7813
Shaft Collar

011647813
11121: RNCC: 3 | RNVC: 9

21 Oct 1983

3040-01-164-7094
Linear Actuating Cylinder Assembly Parts Kit

011647094
5506-34: RNCC: 3 | RNVC: 2
666-2331-15: RNCC: 5 | RNVC: 2
666-2331-15: RNCC: 5 | RNVC: 9

20 Oct 1983

3040-01-164-7084
Shouldered Shaft

011647084
101C411AB PIECE 1: RNCC: 3 | RNVC: 9
501E458CY PIECE 25: RNCC: 5 | RNVC: 9

20 Oct 1983

3040-01-164-6941
Linear Actuating Cylinder

011646941
1-4138: RNCC: 3 | RNVC: 2
001-4138: RNCC: 3 | RNVC: 2

20 Oct 1983

3040-01-164-5897
Spur Gearshaft

011645897
3880004-3: RNCC: 3 | RNVC: 2
3880004-3: RNCC: 5 | RNVC: 9

19 Oct 1983

3040-01-164-2502
Shouldered Shaft

011642502
3932265: RNCC: 3 | RNVC: 2
3932265: RNCC: 5 | RNVC: 9

14 Oct 1983

3040-01-164-0090
Manual Control Lever

011640090
SM-B-423633: RNCC: 3 | RNVC: 2
SM-D-423557-8: RNCC: 5 | RNVC: 2

11 Oct 1983

3040-01-164-0022
Shouldered Shaft

011640022
1174322: RNCC: 3 | RNVC: 2
PL-318244 ITEM 11: RNCC: 5 | RNVC: 2
PL-318244: RNCC: D | RNVC: 9

11 Oct 1983

3040-01-164-0019
Straight Shaft

011640019
6759859: RNCC: 3 | RNVC: 2

11 Oct 1983

3040-01-163-8631
Linear Actuating Cylinder

011638631
7J8298: RNCC: 3 | RNVC: 2

8 Oct 1983

3040-01-163-7352
Remote Control Lever

011637352
A-3361: RNCC: 3 | RNVC: 9
6Z64: RNCC: 5 | RNVC: 2

6 Oct 1983

3040-01-163-7347
Body Hub

011637347
13113: RNCC: 3 | RNVC: 2
14075396: RNCC: 5 | RNVC: 2
13113: RNCC: 5 | RNVC: 9
14075396: RNCC: 5 | RNVC: 9

6 Oct 1983

3040-01-163-7349
Remote Control Lever

011637349
8P3261: RNCC: 3 | RNVC: 2

6 Oct 1983

3040-01-163-7317
Linear Actuating Cylinder Piston

011637317
2P3646: RNCC: 3 | RNVC: 2

6 Oct 1983

3040-01-163-7315
Manual Control Lever

011637315
14037889: RNCC: 3 | RNVC: 2
14037889: RNCC: 5 | RNVC: 9

6 Oct 1983

3040-01-163-7314
Manual Control Lever

011637314
14034728: RNCC: 3 | RNVC: 2
14034728: RNCC: 5 | RNVC: 9

6 Oct 1983

3040-01-163-7206
Hub Clamp

011637206
5P7470: RNCC: 3 | RNVC: 2

6 Oct 1983

3040-01-163-7018
Remote Control Lever

011637018
15648945: RNCC: 3 | RNVC: 2
15648945: RNCC: 5 | RNVC: 9
14037893: RNCC: 5 | RNVC: 9

6 Oct 1983

3040-01-163-5023
Piston Ring

011635023
032597: RNCC: 3 | RNVC: 2
10510661: RNCC: 7 | RNVC: 1

5 Oct 1983

3040-01-100-1280
Shaft Collar

011001280
SM-B-447244: RNCC: 3 | RNVC: 2
SM-B-447244: RNCC: 5 | RNVC: 9

28 Aug 1980

3040-01-163-1012
Worm Shaft

011631012
609-2620-001: RNCC: 3 | RNVC: 2

28 Sep 1983

3040-01-163-0870
Rigid Connecting Link

011630870
371981-3: RNCC: 3 | RNVC: 2
371981: RNCC: D | RNVC: 9

27 Sep 1983

3040-01-163-0864
Hydraulic Accumulator

011630864
238B220: RNCC: 3 | RNVC: 2
3J1816: RNCC: 3 | RNVC: 2
JC2598: RNCC: 5 | RNVC: 9
238B220-A: RNCC: D | RNVC: 9

27 Sep 1983

3040-01-163-0822
Manual Control Lever

011630822
T4-0011: RNCC: 3 | RNVC: 9
T40011: RNCC: 5 | RNVC: 9
00032516: RNCC: 5 | RNVC: 9

27 Sep 1983

3040-01-163-0715
Straight Shaft

011630715
11135: RNCC: 3 | RNVC: 9

27 Sep 1983

3040-01-163-0713
Shaft Collar

011630713
6775109: RNCC: 3 | RNVC: 2

27 Sep 1983

3040-01-163-0712
Shaft Collar

011630712
6775107: RNCC: 3 | RNVC: 2

27 Sep 1983

3040-01-163-0711
Shaft Collar

011630711
6768266: RNCC: 3 | RNVC: 2

27 Sep 1983

3040-01-163-0568
Remote Control Lever

011630568
A12486: RNCC: 3 | RNVC: 9

27 Sep 1983

3040-01-162-8977
Breather

011628977
FB116: RNCC: 3 | RNVC: 2

24 Sep 1983

3040-01-162-8908
Straight Shaft

011628908
455464C2: RNCC: 3 | RNVC: 2
455464C2: RNCC: 5 | RNVC: 9
455464C1: RNCC: C | RNVC: 1
455464C1: RNCC: C | RNVC: 1
455464C1: RNCC: C | RNVC: 1

24 Sep 1983

3040-01-162-8121
Manual Control Lever

011628121
65020053-000: RNCC: 3 | RNVC: 2
217156-1: RNCC: 5 | RNVC: 9
65020053-000: RNCC: C | RNVC: 1

23 Sep 1983

3040-01-162-7640
Body Hub

011627640
6775110: RNCC: 3 | RNVC: 2

22 Sep 1983

3040-01-162-7550
Linear Actuating Cylinder Piston

011627550
9J2007: RNCC: 3 | RNVC: 2
9J2007: RNCC: 5 | RNVC: 2

22 Sep 1983

3040-01-162-7242
Body Hub

011627242
A9486: RNCC: 3 | RNVC: 9

22 Sep 1983

3040-01-162-7237
Straight Shaft

011627237
A9558 TY1: RNCC: 3 | RNVC: 2

22 Sep 1983

3040-01-162-7219
Spur Gearshaft

011627219
A13176: RNCC: 3 | RNVC: 9

22 Sep 1983

3040-01-162-6421
Manual Control Lever

011626421
14055549: RNCC: 3 | RNVC: 2
14055549: RNCC: 5 | RNVC: 9

21 Sep 1983

3040-01-162-6376
Straight Shaft

011626376
16716900: RNCC: 3 | RNVC: 2
167169: RNCC: 5 | RNVC: 9

21 Sep 1983

3040-01-162-5189
Manual Control Lever

011625189
14076258: RNCC: 3 | RNVC: 2
14076258: RNCC: 5 | RNVC: 9
14076258: RNCC: 5 | RNVC: 9

20 Sep 1983

3040-01-162-5069
Straight Shaft

011625069
A9950: RNCC: 3 | RNVC: 9

20 Sep 1983

3040-01-162-4375
Shouldered Shaft

011624375
237256: RNCC: 3 | RNVC: 9
237256: RNCC: C | RNVC: 1

17 Sep 1983

3040-01-162-4222
Control Cam

011624222
14-40128-7: RNCC: 3 | RNVC: 2
14-40128-7: RNCC: 3 | RNVC: 9
14-40128-7: RNCC: 5 | RNVC: 9

17 Sep 1983

3040-01-162-2756
Speedometer-Tachometer Drive Adapter

011622756
877F.4621: RNCC: 3 | RNVC: 2
777F/.4621: RNCC: 5 | RNVC: 9
777F/.4621: RNCC: 5 | RNVC: 9

17 Sep 1983

3040-01-162-0568
Rigid Connecting Link

011620568
11658726: RNCC: 3 | RNVC: 2

14 Sep 1983

3040-01-162-0355
Thrust Collar

011620355
7328405: RNCC: 3 | RNVC: 2

14 Sep 1983

3040-01-162-0198
Manual Control Lever

011620198
K04070002B: RNCC: 3 | RNVC: 2
2EK494: RNCC: 5 | RNVC: 2
2BA36: RNCC: 5 | RNVC: 9
2EK494: RNCC: 5 | RNVC: 9
BFVR-700-B-4IN: RNCC: 5 | RNVC: 9

13 Sep 1983

3040-01-162-0176
Diesel Engine Governor Shaft

011620176
8L4320: RNCC: 3 | RNVC: 2

13 Sep 1983

3040-01-161-8842
Shaft Collar

011618842
9353964: RNCC: 3 | RNVC: 2

11 Sep 1983

3040-01-161-2772
Ball Joint

011612772
A031126: RNCC: 3 | RNVC: 9
31126: RNCC: C | RNVC: 1

3 Sep 1983

3040-01-161-0738
Connecting Link

011610738
SR10449A: RNCC: 3 | RNVC: 2

31 Aug 1983

3040-01-160-8278
Planet Gear Shaft

011608278
10745: RNCC: 3 | RNVC: 2
2AN605: RNCC: 5 | RNVC: 2
10745: RNCC: 5 | RNVC: 9
2AN605: RNCC: 5 | RNVC: 9
50818: RNCC: D | RNVC: 9
50836: RNCC: D | RNVC: 9

27 Aug 1983

3040-01-160-8110
Remote Control Lever

011608110
10510817: RNCC: 3 | RNVC: 2
937391: RNCC: 5 | RNVC: 2
937391: RNCC: 5 | RNVC: 9

27 Aug 1983

3040-01-160-2585
Shouldered Shaft

011602585
A9927: RNCC: 3 | RNVC: 9
10-1742 PIECE 51: RNCC: 5 | RNVC: 9

19 Aug 1983

3040-01-160-1598
Straight Shaft

011601598
7831538: RNCC: 3 | RNVC: 2
7831538: RNCC: 5 | RNVC: 2
7831538: RNCC: 5 | RNVC: 9
7831538: RNCC: 5 | RNVC: 9

18 Aug 1983

3040-01-159-9799
Linear Actuating Cylinder

011599799
MS-6518-1: RNCC: 3 | RNVC: 2

16 Aug 1983

3040-01-159-8828
Linear Actuating Cylinder Assembly

011598828
6-372-001834: RNCC: 3 | RNVC: 2
6-372-001722: RNCC: 5 | RNVC: 9

14 Aug 1983

3040-01-159-8803
Manual Control Lever

011598803
9795470: RNCC: 3 | RNVC: 2
9795470: RNCC: 3 | RNVC: 9

14 Aug 1983

3040-01-159-8802
Manual Control Lever

011598802
334540: RNCC: 3 | RNVC: 2
334540: RNCC: 5 | RNVC: 9

14 Aug 1983

3040-01-159-8798
Mechanical Drive Housing

011598798
6258340: RNCC: 3 | RNVC: 2
6258340: RNCC: 5 | RNVC: 9

14 Aug 1983

3040-01-159-8740
Throttle Shaft

011598740
3010943: RNCC: 3 | RNVC: 2

14 Aug 1983

3040-01-159-8674
Shouldered Shaft

011598674
11367: RNCC: 3 | RNVC: 2
2AW157: RNCC: 3 | RNVC: 2
2AW157: RNCC: 5 | RNVC: 9
11367: RNCC: 5 | RNVC: 9
50818: RNCC: D | RNVC: 9

14 Aug 1983

3040-01-159-7950
Rigid Connecting Link

011597950
14039765: RNCC: 3 | RNVC: 2
14039765: RNCC: 5 | RNVC: 9

13 Aug 1983

3040-01-159-3592
Rigid Connecting Link

011593592
5100625: RNCC: 3 | RNVC: 2

6 Aug 1983

3040-01-159-2981
Rigid Connecting Link

011592981
4V8264: RNCC: 3 | RNVC: 2

5 Aug 1983

3040-01-159-2962
Linear Actuating Cylinder

011592962
72643-65X4 PIECE 9: RNCC: 3 | RNVC: 2
SSN678-501-4361591 PIECE 9: RNCC: 5 | RNVC: 9
SSN685-522-4390727 PIECE 9: RNCC: 5 | RNVC: 9
501-4361591 PC 9: RNCC: 5 | RNVC: 9
501-4361591 PC 9: RNCC: 5 | RNVC: 9

5 Aug 1983

3040-01-159-1775
Rigid Connecting Link

011591775
14039716: RNCC: 3 | RNVC: 2
14039716: RNCC: 5 | RNVC: 9

4 Aug 1983

3040-01-159-0937
Linear Actuating Cylinder Piston

011590937
8N5764: RNCC: 3 | RNVC: 2

3 Aug 1983

3040-01-159-0755
Linear Actuating Cylinder Assembly Parts Kit

011590755
23417: RNCC: 3 | RNVC: 9

3 Aug 1983

3040-01-158-9656
Bell Crank Support

011589656
70400-08116-048: RNCC: 3 | RNVC: 2
70400-08116-048: RNCC: 7 | RNVC: 2

31 Jul 1983

3040-01-158-9329
Straight Shaft

011589329
2P6008: RNCC: 3 | RNVC: 2

31 Jul 1983

3040-01-158-8789
Shaft Retaining Plate

011588789
11202: RNCC: 3 | RNVC: 2
2AN574: RNCC: 5 | RNVC: 2
50818PC57: RNCC: 5 | RNVC: 2
2AN574: RNCC: 5 | RNVC: 9
50818: RNCC: D | RNVC: 9

30 Jul 1983

3040-01-158-8787
Remote Control Lever

011588787
4V6394: RNCC: 3 | RNVC: 2

30 Jul 1983

3040-01-158-8703
Manual Control Lever

011588703
335452: RNCC: 3 | RNVC: 2
335452: RNCC: 5 | RNVC: 9

30 Jul 1983

3040-01-158-8640
Shaft Retaining Plate

011588640
11829365: RNCC: 3 | RNVC: 2
11829365: RNCC: 5 | RNVC: 2

30 Jul 1983

3040-01-158-8473
Shaft Collar

011588473
7J9887: RNCC: 3 | RNVC: 2

30 Jul 1983

3040-01-158-7492
Hydraulic Parts Kit

011587492
26408: RNCC: 3 | RNVC: 9

27 Jul 1983

3040-01-094-3009
Shaft Collar

010943009
3274227: RNCC: 3 | RNVC: 2

7 May 1980

3040-01-158-6094
Rigid Connecting Link

011586094
70400-02232-047: RNCC: 3 | RNVC: 2
70400-02232-047: RNCC: 5 | RNVC: 9

25 Jul 1983

3040-01-158-6091
Rigid Connecting Link

011586091
70400-02206-043: RNCC: 3 | RNVC: 2
3040PL1941394: RNCC: 6 | RNVC: 9

25 Jul 1983

3040-01-158-6093
Rigid Connecting Link

011586093
70400-02232-046: RNCC: 3 | RNVC: 2
3040PL2023876: RNCC: 6 | RNVC: 9
70400-02232-042: RNCC: E | RNVC: 8
70400-02232: RNCC: E | RNVC: 8

25 Jul 1983

3040-01-093-2782
Straight Shaft

010932782
240858-001: RNCC: 3 | RNVC: 9

13 Apr 1980

3040-01-157-8719
Counterbalance Weight

011578719
691122-1: RNCC: 3 | RNVC: 2

13 Jul 1983

3040-01-157-7997
Pawl

011577997
7040174: RNCC: 3 | RNVC: 2
7040174: RNCC: 5 | RNVC: 9

12 Jul 1983

3040-01-157-7944
Mechanical Drive Housing

011577944
15614201: RNCC: 3 | RNVC: 9
14020892: RNCC: 5 | RNVC: 9
15614201: RNCC: C | RNVC: 1

12 Jul 1983

3040-01-157-7940
Linear Actuating Cylinder Assembly

011577940
25956: RNCC: 3 | RNVC: 9

12 Jul 1983

3040-01-157-7939
Linear Actuating Cylinder Assembly

011577939
12207: RNCC: 3 | RNVC: 9
59888: RNCC: 5 | RNVC: 9

12 Jul 1983

3040-01-157-6303
Linear Actuating Cylinder Assembly

011576303
42014: RNCC: 3 | RNVC: 9
17026: RNCC: 5 | RNVC: 9
17027: RNCC: 5 | RNVC: 9

9 Jul 1983

3040-01-157-6279
Rigid Connecting Link

011576279
175.900: RNCC: 3 | RNVC: 2
175.900: RNCC: 5 | RNVC: 9
10505581: RNCC: 7 | RNVC: 2

9 Jul 1983

3040-01-157-6155
Shaft Retaining Plate

011576155
J24563-6: RNCC: 3 | RNVC: 2
2BA173: RNCC: 5 | RNVC: 2
2BA173: RNCC: 5 | RNVC: 9

9 Jul 1983

3040-01-157-4421
Bell Crank

011574421
303-3112: RNCC: 3 | RNVC: 2
2BA282: RNCC: 5 | RNVC: 2
2BA282: RNCC: 5 | RNVC: 9
300 8797: RNCC: 5 | RNVC: 9

6 Jul 1983

3040-01-157-4383
Spur Gearshaft

011574383
4V8566: RNCC: 3 | RNVC: 2

6 Jul 1983

3040-01-157-4256
Rigid Connecting Link

011574256
1327200W: RNCC: 3 | RNVC: 2
1327200W: RNCC: 5 | RNVC: 9

6 Jul 1983

3040-01-157-3627
Linear Actuating Cylinder Head

011573627
341 3667: RNCC: 3 | RNVC: 2
2AW926: RNCC: 5 | RNVC: 2
2AW926: RNCC: 5 | RNVC: 9

4 Jul 1983

3040-01-157-3575
Manual Control Lever

011573575
1325660W: RNCC: 3 | RNVC: 2
1325660W: RNCC: 5 | RNVC: 9

4 Jul 1983

3040-01-157-3174
Linear Actuating Cylinder Assembly

011573174
36694-203: RNCC: 3 | RNVC: 2
362374: RNCC: 3 | RNVC: 2

4 Jul 1983

3040-01-157-1312
Mechanical Drive Housing

011571312
10513762: RNCC: 3 | RNVC: 2
012496: RNCC: 5 | RNVC: 2
3502: RNCC: 5 | RNVC: 9

30 Jun 1983

3040-01-157-0857
Shouldered Shaft

011570857
11020211: RNCC: 3 | RNVC: 2

29 Jun 1983

3040-01-092-1304
Rigid Connecting Link

010921304
07900-60038: RNCC: 3 | RNVC: 2

20 Mar 1980

3040-01-156-9869
Linear Actuating Cylinder Assembly

011569869
12267: RNCC: 3 | RNVC: 9

28 Jun 1983

3040-01-156-9817
Hydraulic Parts Kit

011569817
26409: RNCC: 3 | RNVC: 9

28 Jun 1983

3040-01-156-9601
Straight Shaft

011569601
1352790: RNCC: 3 | RNVC: 2
1352790: RNCC: 5 | RNVC: 9

28 Jun 1983

3040-01-156-8307
Rigid Connecting Link

011568307
15638379: RNCC: 3 | RNVC: 2
15638379: RNCC: 5 | RNVC: 9
3856857: RNCC: 5 | RNVC: 9

25 Jun 1983

3040-01-156-8286
Shouldered Shaft

011568286
3303429115: RNCC: 3 | RNVC: 2
D98-31: RNCC: 5 | RNVC: 2
B06266: RNCC: 5 | RNVC: 9
3303429012: RNCC: 5 | RNVC: 9

25 Jun 1983

3040-01-156-7556
Inertia Damper

011567556
16756160-003: RNCC: 3 | RNVC: 2
10131: RNCC: C | RNVC: 1

24 Jun 1983

3040-01-156-7182
Manual Control Lever

011567182
15649193: RNCC: 3 | RNVC: 2
15649193: RNCC: 5 | RNVC: 9
334307: RNCC: 5 | RNVC: 9

23 Jun 1983

3040-01-156-4851
Cylinder Housing Assembly

011564851
3G4754: RNCC: 3 | RNVC: 2

21 Jun 1983

3040-01-156-0424
Bell Crank

011560424
12315888: RNCC: 3 | RNVC: 2

18 Jun 1983

3040-01-156-0084
Manual Control Lever

011560084
L-9985: RNCC: 3 | RNVC: 9

17 Jun 1983

3040-01-155-8772
Shouldered Shaft

011558772
384-0838-00: RNCC: 3 | RNVC: 2

16 Jun 1983

3040-01-155-6758
Shouldered Shaft

011556758
63793CX: RNCC: 3 | RNVC: 2
63793CX: RNCC: 5 | RNVC: 9

14 Jun 1983

3040-01-155-5887
Pawl

011555887
404409: RNCC: 3 | RNVC: 2
2AA632: RNCC: 5 | RNVC: 2
2AA632: RNCC: 5 | RNVC: 9

11 Jun 1983

3040-01-155-5864
Manual Control Lever

011555864
14022777: RNCC: 3 | RNVC: 2
14022777: RNCC: 5 | RNVC: 9

11 Jun 1983

3040-01-155-5795
Shaft Retaining Plate

011555795
294515: RNCC: 3 | RNVC: 2
2AL646: RNCC: 5 | RNVC: 2
5731962: RNCC: 5 | RNVC: 2
2AL646: RNCC: 5 | RNVC: 9
10510533: RNCC: 5 | RNVC: 9
10511628: RNCC: 8 | RNVC: 2
247236: RNCC: C | RNVC: 1

11 Jun 1983

3040-01-155-4165
Linear Actuating Cylinder Piston

011554165
7J9886: RNCC: 3 | RNVC: 2

9 Jun 1983

3040-01-155-3006
Counterbalance Weight

011553006
691123-0001: RNCC: 3 | RNVC: 2
691123-1: RNCC: 5 | RNVC: 9

7 Jun 1983

3040-01-155-2658
Extension Shaft

011552658
172B4107G1: RNCC: 3 | RNVC: 2
10117850: RNCC: 6 | RNVC: 9

7 Jun 1983

3040-01-089-0558
Rigid Connecting Link

010890558
5044T12: RNCC: 1 | RNVC: 2
L-0009: RNCC: 3 | RNVC: 2
ALK2-20: RNCC: 3 | RNVC: 2
DVV3 8J: RNCC: 3 | RNVC: 2
KSL105203B: RNCC: 3 | RNVC: 2
5044T12P04: RNCC: 5 | RNVC: 2
5044T12P01: RNCC: 5 | RNVC: 2
5044T12P02: RNCC: 5 | RNVC: 2
5044T12P03: RNCC: 5 | RNVC: 2
4045T12P04: RNCC: 5 | RNVC: 2

25 Jan 1980

3040-01-155-0373
Rigid Connecting Link

011550373
14039768: RNCC: 3 | RNVC: 2
14039768: RNCC: 5 | RNVC: 9
14039767: RNCC: D | RNVC: 9

4 Jun 1983

3040-01-155-0370
Bell Crank

011550370
7N7264: RNCC: 3 | RNVC: 2

4 Jun 1983

3040-01-155-0371
Rigid Connecting Link

011550371
327067: RNCC: 3 | RNVC: 2
327067: RNCC: 5 | RNVC: 9

4 Jun 1983

3040-01-155-0135
Linear Actuating Cylinder Piston Rod

011550135
10501093: RNCC: 3 | RNVC: 2

4 Jun 1983

3040-01-155-0107
Shouldered Shaft

011550107
13204E2974: RNCC: 3 | RNVC: 2

4 Jun 1983

3040-01-154-8984
Counterbalance Weight

011548984
639AS534: RNCC: 3 | RNVC: 1

2 Jun 1983

3040-01-154-7830
Spur Gearshaft

011547830
12284387: RNCC: 1 | RNVC: 2
3-020-175-24: RNCC: 3 | RNVC: 2
3-020-175-24: RNCC: 3 | RNVC: 2
3-020-175-24: RNCC: 3 | RNVC: 2
3-020-175-24: RNCC: 3 | RNVC: 2
3-020-175-24: RNCC: 5 | RNVC: 9
3-020-175-24: RNCC: 5 | RNVC: 9

31 May 1983

3040-01-154-7804
Shouldered Shaft

011547804
10501014: RNCC: 3 | RNVC: 2
2402-7000.16: RNCC: 5 | RNVC: 9

31 May 1983

3040-01-154-7061
Shouldered Shaft

011547061
13219E2419: RNCC: 3 | RNVC: 2

30 May 1983

3040-01-154-6453
Control Cam

011546453
AA01020A-1PA: RNCC: 3 | RNVC: 2
7127-51-9-P: RNCC: 5 | RNVC: 9

28 May 1983

3040-01-154-1433
Rotating Shaft Eye Bracket

011541433
10924593: RNCC: 3 | RNVC: 2

20 May 1983

3040-01-154-1249
Shouldered Shaft

011541249
8N3088: RNCC: 3 | RNVC: 2

20 May 1983

3040-01-153-9463
Manual Control Lever

011539463
012-0274-22: RNCC: 3 | RNVC: 2
S-212 ITEM 14: RNCC: 3 | RNVC: 2
S-212: RNCC: D | RNVC: 9

18 May 1983

3040-01-153-2732
Shouldered Shaft

011532732
02-25-07385-1126: RNCC: 3 | RNVC: 2
2AL364: RNCC: 5 | RNVC: 9

14 May 1983

3040-01-086-1677
Mechanical Drive Housing

010861677
12253575: RNCC: 3 | RNVC: 2
3040010861677: RNCC: 5 | RNVC: 9
2590009992343: RNCC: 6 | RNVC: 9
3040010861677: RNCC: 6 | RNVC: 9

21 Nov 1979

3040-01-153-2280
Push-Pull Control Assembly

011532280
58R10: RNCC: 3 | RNVC: 9

13 May 1983

3040-01-153-1815
Mechanical Drive Housing

011531815
26010481: RNCC: 3 | RNVC: 2
1252981: RNCC: 5 | RNVC: 9
26010481: RNCC: 5 | RNVC: 9

13 May 1983

3040-01-153-1610
Remote Control Lever

011531610
10587-A: RNCC: 3 | RNVC: 9
2BA65: RNCC: 5 | RNVC: 2
2BA65: RNCC: 5 | RNVC: 9
45A217: RNCC: D | RNVC: 9

13 May 1983

3040-01-152-9216
Straight Shaft

011529216
8N2510: RNCC: 3 | RNVC: 2

10 May 1983

3040-01-152-7821
Bevel Gearshaft

011527821
1095562: RNCC: 3 | RNVC: 2
2G5769: RNCC: 5 | RNVC: 9

7 May 1983

3040-01-152-7794
Lever Arm Assembly

011527794
5-17-6601-00: RNCC: 3 | RNVC: 9
5-17-6603: RNCC: 5 | RNVC: 9

7 May 1983

3040-01-152-7787
Manual Control Lever

011527787
357889: RNCC: 3 | RNVC: 2
357889: RNCC: 5 | RNVC: 9
3856359: RNCC: D | RNVC: 9

7 May 1983

3040-01-152-7786
Manual Control Lever

011527786
357890: RNCC: 3 | RNVC: 2
357890: RNCC: 5 | RNVC: 9
3856359: RNCC: D | RNVC: 9

7 May 1983

3040-01-152-7654
Lever Arm Assembly

011527654
5-17-6602-00: RNCC: 3 | RNVC: 9
5-17-6604: RNCC: 5 | RNVC: 9

7 May 1983

3040-01-152-5488
Linear Actuating Cylinder Assembly Parts Kit

011525488
330-0731: RNCC: 3 | RNVC: 2
330-0731: RNCC: 5 | RNVC: 2
2AT701: RNCC: 5 | RNVC: 2
2AT701: RNCC: 5 | RNVC: 9

4 May 1983

3040-01-152-5487
Linear Actuating Cylinder Assembly Parts Kit

011525487
330-0692: RNCC: 3 | RNVC: 2
2AT700: RNCC: 5 | RNVC: 2
2AT700: RNCC: 5 | RNVC: 9

4 May 1983

3040-01-151-8861
Linear Actuating Cylinder Piston

011518861
24071: RNCC: 3 | RNVC: 2

23 Apr 1983

3040-01-151-7989
Straight Shaft

011517989
14037959: RNCC: 3 | RNVC: 2
13727: RNCC: 5 | RNVC: 2
14037959: RNCC: 5 | RNVC: 9

22 Apr 1983

3040-01-151-6382
Remote Control Lever

011516382
14029126: RNCC: 3 | RNVC: 2
14029126: RNCC: 5 | RNVC: 9
15413: RNCC: D | RNVC: 9

20 Apr 1983

3040-01-151-6379
Push-Pull Control Assembly

011516379
D032377-003-0072.0: RNCC: 3 | RNVC: 9
D032377-003-6FT: RNCC: 5 | RNVC: 9
D032377-003-72IN: RNCC: 5 | RNVC: 9
33C6FT: RNCC: 5 | RNVC: 9
33-C-72IN: RNCC: 5 | RNVC: 9
32377-003-0072I: RNCC: C | RNVC: 1

20 Apr 1983

3040-01-151-6327
Shouldered Shaft

011516327
87832-1639 ITEM 25: RNCC: 3 | RNVC: 2
709-4684910 ITEM 25: RNCC: 5 | RNVC: 2
87832-1639: RNCC: D | RNVC: 9
709-4684910: RNCC: D | RNVC: 9

20 Apr 1983

3040-01-151-6223
Bell Crank

011516223
5830125: RNCC: 3 | RNVC: 2
5830125: RNCC: 5 | RNVC: 2

20 Apr 1983

3040-01-151-6200
Linear Actuating Cylinder Assembly

011516200
24075: RNCC: 3 | RNVC: 9
7002907: RNCC: C | RNVC: 1

20 Apr 1983

3040-01-151-5718
Counterbalance Weight

011515718
579-1058-01: RNCC: 3 | RNVC: 2
10163646: RNCC: 6 | RNVC: 9

19 Apr 1983

3040-01-151-3937
Manual Control Lever

011513937
3V0530: RNCC: 3 | RNVC: 2
3V530: RNCC: 5 | RNVC: 9

16 Apr 1983

3040-01-151-3996
Rigid Connecting Link

011513996
2G8599: RNCC: 3 | RNVC: 2

16 Apr 1983

3040-01-151-3994
Remote Control Lever

011513994
3P6159: RNCC: 3 | RNVC: 2

16 Apr 1983

3040-01-151-3995
Rigid Connecting Link

011513995
3G4761: RNCC: 3 | RNVC: 2

16 Apr 1983

3040-01-151-3754
Straight Shaft

011513754
5066: RNCC: 3 | RNVC: 2
A5066: RNCC: 5 | RNVC: 9

16 Apr 1983

3040-01-151-3568
Mechanical Drive Housing

011513568
23045053: RNCC: 3 | RNVC: 2
6885158: RNCC: 5 | RNVC: 9

16 Apr 1983

3040-01-151-3274
Shaft Collar

011513274
8-52-231: RNCC: 3 | RNVC: 9
8-52T-07 ITEM 68: RNCC: 5 | RNVC: 9
8-52T-07 ITEM 68: RNCC: 5 | RNVC: 9
8-52-231: RNCC: 5 | RNVC: 9
22SS: RNCC: C | RNVC: 1

16 Apr 1983

3040-01-151-2884
Spline Adapter

011512884
1594597-2: RNCC: 3 | RNVC: 2
93-31300-06: RNCC: 5 | RNVC: 2
C-10202: RNCC: 5 | RNVC: 2
1594597-2: RNCC: 5 | RNVC: 9

15 Apr 1983

3040-01-151-2660
Remote Control Lever

011512660
2W6102: RNCC: 3 | RNVC: 2
7N8784: RNCC: 5 | RNVC: 9

15 Apr 1983

3040-01-151-2557
Cylinder Parts Kit

011512557
396747: RNCC: 3 | RNVC: 2

15 Apr 1983

3040-01-083-5298
Shaft

010835298
BL-6625: RNCC: 3 | RNVC: 2

26 Sep 1979

3040-01-151-0141
Straight Shaft

011510141
223 7883: RNCC: 3 | RNVC: 2
13142983-7/25: RNCC: 3 | RNVC: 2
13142983-7/25: RNCC: 5 | RNVC: 9

12 Apr 1983

3040-01-150-3940
Remote Control Lever

011503940
6G5058: RNCC: 3 | RNVC: 2

4 Apr 1983

3040-01-150-1733
Straight Shaft

011501733
M300070: RNCC: 3 | RNVC: 2

31 Mar 1983

3040-01-150-0409
Shouldered Shaft

011500409
15594195: RNCC: 3 | RNVC: 2
15594195: RNCC: 5 | RNVC: 9
15220: RNCC: 5 | RNVC: 9
14037969: RNCC: 5 | RNVC: 9

29 Mar 1983

3040-01-149-5870
Linear Actuating Cylinder Assembly Parts Kit

011495870
23432: RNCC: 3 | RNVC: 9

23 Mar 1983

3040-01-149-5750
Idler Shaft

011495750
N2-TIGHTNER SHAFT: RNCC: 3 | RNVC: 2

22 Mar 1983

3040-01-149-5059
Body Hub

011495059
3P0785: RNCC: 3 | RNVC: 2
3P785: RNCC: 5 | RNVC: 9

22 Mar 1983

3040-01-149-3826
Mechanical Drive Housing

011493826
15079: RNCC: 3 | RNVC: 2
14037983: RNCC: 5 | RNVC: 2
14037983: RNCC: 5 | RNVC: 9
15085: RNCC: C | RNVC: 1

19 Mar 1983

3040-01-149-3300
Shouldered Shaft

011493300
25502630: RNCC: 3 | RNVC: 2
94KH11A: RNCC: 5 | RNVC: 2
K-500-CH-0222: RNCC: 5 | RNVC: 2
94KH11A: RNCC: 5 | RNVC: 9
10026270: RNCC: 5 | RNVC: 9

18 Mar 1983

3040-01-149-2714
Linear Actuating Cylinder Assembly

011492714
LS3011524TA-00: RNCC: 3 | RNVC: 2
134658A: RNCC: 5 | RNVC: 2
134658A: RNCC: 5 | RNVC: 9

17 Mar 1983

3040-01-149-1887
Spur Gearshaft

011491887
3P0298: RNCC: 3 | RNVC: 2
3P298: RNCC: 5 | RNVC: 9

16 Mar 1983

3040-01-149-1849
Shouldered Shaft

011491849
5730693: RNCC: 3 | RNVC: 2
6837484: RNCC: 3 | RNVC: 2

16 Mar 1983

3040-01-149-1674
Push-Pull Control Assembly

011491674
B48701-000-0036: RNCC: 3 | RNVC: 2
B48701-000-0036: RNCC: 5 | RNVC: 9

15 Mar 1983

3040-01-149-1378
Rigid Connecting Link

011491378
10883263: RNCC: 3 | RNVC: 2

15 Mar 1983

3040-01-149-1236
Mechanical Drive Housing

011491236
6P2090: RNCC: 3 | RNVC: 2

15 Mar 1983

3040-01-149-0978
Pulley Shaft

011490978
Q127484: RNCC: 3 | RNVC: 9

15 Mar 1983

3040-01-149-0243
Shouldered Shaft

011490243
90312-1: RNCC: 3 | RNVC: 2

14 Mar 1983

3040-01-149-0241
Shouldered Shaft

011490241
7778-30: RNCC: 3 | RNVC: 2

14 Mar 1983

3040-01-148-9432
Shouldered Shaft

011489432
14037979: RNCC: 3 | RNVC: 2
14037979: RNCC: 5 | RNVC: 9
15333: RNCC: D | RNVC: 9

13 Mar 1983

3040-01-148-9430
Straight Shaft

011489430
14033822: RNCC: 3 | RNVC: 2
14033822: RNCC: 5 | RNVC: 9

13 Mar 1983

3040-01-148-9427
Straight Shaft

011489427
7S8631: RNCC: 3 | RNVC: 2

13 Mar 1983

3040-01-148-9428
Straight Shaft

011489428
3P0726: RNCC: 3 | RNVC: 2
3P726: RNCC: 5 | RNVC: 9

13 Mar 1983

3040-01-148-8880
Mechanical Drive Housing

011488880
8N1570: RNCC: 3 | RNVC: 2

12 Mar 1983

3040-01-148-8172
Pulley Shaft

011488172
K-500-EN-0157: RNCC: 3 | RNVC: 2
9N3342: RNCC: 5 | RNVC: 2

11 Mar 1983

3040-01-148-5982
Hub Clamp

011485982
3882979: RNCC: 3 | RNVC: 2
3882979: RNCC: 5 | RNVC: 9

8 Mar 1983

3040-01-148-4931
Shaft Retaining Plate

011484931
9337964: RNCC: 3 | RNVC: 2

7 Mar 1983

3040-01-148-2816
Injector Fuel Housing

011482816
8N2663: RNCC: 3 | RNVC: 2

3 Mar 1983

3040-01-148-2798
Straight Shaft

011482798
2358883: RNCC: 3 | RNVC: 2
2358883: RNCC: 5 | RNVC: 9

3 Mar 1983

3040-01-147-9321
Straight Shaft

011479321
26056109: RNCC: 3 | RNVC: 2
26056109: RNCC: 5 | RNVC: 9
14006401: RNCC: 5 | RNVC: 9

25 Feb 1983

3040-01-147-6479
Push-Pull Control Assembly

011476479
4114232: RNCC: 3 | RNVC: 2

19 Feb 1983

3040-01-147-5481
Shouldered Shaft

011475481
4N0444: RNCC: 3 | RNVC: 2
4N444: RNCC: D | RNVC: 9

18 Feb 1983

3040-01-147-4207
Mechanical Drive Housing

011474207
14020861: RNCC: 3 | RNVC: 2
14020861: RNCC: 5 | RNVC: 9

16 Feb 1983

3040-01-147-4096
Extension Shaft

011474096
384-1560-00: RNCC: 3 | RNVC: 2

16 Feb 1983

3040-01-147-1407
Spur Gearshaft

011471407
SM-D-414574: RNCC: 3 | RNVC: 2
3040011471407: RNCC: 6 | RNVC: 9
SM-B-414574: RNCC: C | RNVC: 1

11 Feb 1983

3040-01-147-1360
Straight Shaft

011471360
4N9018: RNCC: 3 | RNVC: 2

11 Feb 1983

3040-01-147-1083
Shouldered Shaft

011471083
374338: RNCC: 3 | RNVC: 2
C374338: RNCC: 5 | RNVC: 2
374338: RNCC: 5 | RNVC: 2
320-0136: RNCC: 5 | RNVC: 9
374338: RNCC: 5 | RNVC: 9

11 Feb 1983

3040-01-147-0754
Shouldered Shaft

011470754
143437-0001: RNCC: 3 | RNVC: 2

10 Feb 1983

3040-01-146-9804
Nonrotating Shaft Eye Bracket

011469804
0N272819: RNCC: 3 | RNVC: 2

9 Feb 1983

3040-01-146-7967
Rigid Connecting Link

011467967
4V0627: RNCC: 3 | RNVC: 2
4V627: RNCC: D | RNVC: 9

5 Feb 1983

3040-01-146-7546
Counterbalance Weight

011467546
691128-0016: RNCC: 3 | RNVC: 2
691128-16: RNCC: 5 | RNVC: 9

4 Feb 1983

3040-01-146-7535
Counterbalance Weight

011467535
691128-0005: RNCC: 3 | RNVC: 2
691128-5: RNCC: 5 | RNVC: 9

4 Feb 1983

3040-01-146-7537
Counterbalance Weight

011467537
691128-0007: RNCC: 3 | RNVC: 2
691128-7: RNCC: 5 | RNVC: 9

4 Feb 1983

3040-01-146-7536
Counterbalance Weight

011467536
691128-0006: RNCC: 3 | RNVC: 2
691128-6: RNCC: 5 | RNVC: 9

4 Feb 1983

3040-01-146-5953
Rigid Connecting Link

011465953
12267061: RNCC: 3 | RNVC: 2

3 Feb 1983

3040-01-077-1825
Remote Control Lever

010771825
10932848: RNCC: 3 | RNVC: 2

19 May 1979

3040-01-146-3119
Straight Shaft

011463119
3012531: RNCC: 3 | RNVC: 2
5731010: RNCC: 3 | RNVC: 2

27 Jan 1983

3040-01-146-0208
Shouldered Shaft

011460208
26591: RNCC: 3 | RNVC: 2

23 Jan 1983

3040-01-145-6105
Ball Joint

011456105
2514-1714: RNCC: 3 | RNVC: 2
2514-1714: RNCC: 5 | RNVC: 9
2514-174: RNCC: C | RNVC: 1

14 Jan 1983

3040-01-145-5259
Shut Off Shaft

011455259
7123-726: RNCC: 3 | RNVC: 2

14 Jan 1983

3040-01-145-4849
Worm Shaft

011454849
77349: RNCC: 3 | RNVC: 2
P-77349: RNCC: 3 | RNVC: 2

12 Jan 1983

3040-01-145-4830
Stationary Disk

011454830
8-003-102-02: RNCC: 3 | RNVC: 2
8-003-102-2: RNCC: 5 | RNVC: 9

12 Jan 1983

3040-01-145-4284
Rigid Connecting Link

011454284
10937936: RNCC: 3 | RNVC: 2

11 Jan 1983

3040-01-145-2273
Counterbalance Weight

011452273
565906CL1: RNCC: 3 | RNVC: 2
565906CL1: RNCC: 5 | RNVC: 2

7 Jan 1983

3040-01-075-5640
Shouldered Shaft

010755640
777-3369-001: RNCC: 3 | RNVC: 2
777-3369-001: RNCC: 3 | RNVC: 9

23 Apr 1979

3040-01-145-0382
Body Hub

011450382
5599887: RNCC: 3 | RNVC: 2

4 Jan 1983

3040-01-144-8220
Shouldered Shaft

011448220
61154BX: RNCC: 3 | RNVC: 2
105591: RNCC: 5 | RNVC: 9
61154BX: RNCC: 5 | RNVC: 9

30 Dec 1982

3040-01-144-3385
Spur Gearshaft

011443385
143405AND3049540: RNCC: 3 | RNVC: 2
AR-5952: RNCC: 5 | RNVC: 9

18 Dec 1982

3040-01-144-3332
Straight Shaft

011443332
9290862: RNCC: 3 | RNVC: 2

18 Dec 1982

3040-01-073-6002
Linear Actuating Cylinder Piston Rod

010736002
BLT1314: RNCC: 3 | RNVC: 9
BLT1314: RNCC: 5 | RNVC: 9
PL21245PIECE71: RNCC: 5 | RNVC: 9
BLT1314: RNCC: C | RNVC: 1
BLT1314: RNCC: C | RNVC: 1
HL-21147: RNCC: D | RNVC: 9

17 Mar 1979

3040-01-143-4359
Spring Attachment

011434359
SC-B-555926: RNCC: 3 | RNVC: 2

3 Dec 1982

3040-01-143-4343
Brake Shoe

011434343
2400-280: RNCC: 3 | RNVC: 9

3 Dec 1982

3040-01-143-3486
Shouldered Shaft

011433486
B161513: RNCC: 3 | RNVC: 9
161513: RNCC: 5 | RNVC: 9

2 Dec 1982

3040-01-143-1580
Straight Shaft

011431580
9290861: RNCC: 3 | RNVC: 2

28 Nov 1982

3040-01-143-1303
Arm Assembly

011431303
70400-02196-043: RNCC: 3 | RNVC: 2

28 Nov 1982

3040-01-142-8248
Mechanical Drive Housing

011428248
12312428: RNCC: 3 | RNVC: 2

21 Nov 1982

3040-01-072-4524
Shouldered Shaft

010724524
42277D121: RNCC: 3 | RNVC: 9
42277D121: RNCC: 5 | RNVC: 9

1 Mar 1979

3040-01-142-6706
Manual Control Lever

011426706
5035L550-1: RNCC: 3 | RNVC: 2

18 Nov 1982

3040-01-142-6554
Straight Shaft

011426554
527193: RNCC: 3 | RNVC: 2
527193: RNCC: 5 | RNVC: 2

18 Nov 1982

3040-01-142-4979
Linear Actuating Cylinder

011424979
2770170: RNCC: 3 | RNVC: 9
2770916: RNCC: 5 | RNVC: 9
2770110: RNCC: 5 | RNVC: 9

17 Nov 1982

3040-01-141-8610
Straight Shaft

011418610
6028053406: RNCC: 3 | RNVC: 2
6028-0534: RNCC: D | RNVC: 9

7 Nov 1982

3040-01-141-8611
Shouldered Shaft

011418611
290369: RNCC: 3 | RNVC: 2

7 Nov 1982

3040-01-141-1370
Brake Band And Lining

011411370
110553: RNCC: 3 | RNVC: 2
N440672: RNCC: 5 | RNVC: 2

24 Oct 1982

3040-01-141-0947
Shouldered Shaft

011410947
66389-308-3: RNCC: 3 | RNVC: 2

23 Oct 1982

3040-01-140-6769
Control Cam

011406769
738032-18: RNCC: 3 | RNVC: 2
738032-18: RNCC: 5 | RNVC: 2

17 Oct 1982

3040-01-140-4574
Remote Control Lever

011404574
11629764: RNCC: 3 | RNVC: 2

13 Oct 1982

3040-01-140-4537
Linear Hydraulic-Pneumatic Actuator

011404537
11629792: RNCC: 3 | RNVC: 2

13 Oct 1982

3040-01-140-4185
Rigid Connecting Link

011404185
2659246: RNCC: 3 | RNVC: 2

11 Oct 1982

3040-01-140-2141
Manual Control Lever

011402141
111-4643291 ITEM 1: RNCC: 3 | RNVC: 2
87462-0403 ITEM 1: RNCC: 5 | RNVC: 2
4643291-0001: RNCC: 5 | RNVC: 2
37-33-2022: RNCC: 5 | RNVC: 9
87462-0403: RNCC: D | RNVC: 9
111-4643291: RNCC: D | RNVC: 9

8 Oct 1982

3040-01-139-4520
Gearshaft

011394520
390681: RNCC: 3 | RNVC: 9
390681: RNCC: 5 | RNVC: 2
390681: RNCC: 5 | RNVC: 9
390681: RNCC: 5 | RNVC: 9

3 Oct 1982

3040-01-139-3003
Shaft

011393003
332080: RNCC: 3 | RNVC: 2

29 Sep 1982

3040-01-139-2192
Shouldered Shaft

011392192
132D1932: RNCC: 3 | RNVC: 2
10106903: RNCC: 6 | RNVC: 9

27 Sep 1982

3040-01-138-5392
Flexible Drive Shaft

011385392
02-2369-02: RNCC: 3 | RNVC: 2
A23830-1: RNCC: C | RNVC: 1
A23830-001: RNCC: C | RNVC: 1
A23830-01: RNCC: C | RNVC: 1

16 Sep 1982

3040-01-138-3070
Rod Extension

011383070
2617146: RNCC: 3 | RNVC: 2

9 Sep 1982

3040-01-137-8238
Shouldered Shaft

011378238
723043: RNCC: 3 | RNVC: 2
723043: RNCC: 5 | RNVC: 2
723043: RNCC: 5 | RNVC: 9
723043: RNCC: 5 | RNVC: 9
23757: RNCC: 5 | RNVC: 9

2 Sep 1982

3040-01-137-6531
Shouldered Shaft

011376531
727579: RNCC: 3 | RNVC: 2
727579: RNCC: 5 | RNVC: 2
727579: RNCC: 5 | RNVC: 9

1 Sep 1982

3040-01-137-6264
Linear Actuating Cylinder Piston Rod

011376264
10876312: RNCC: 3 | RNVC: 2

1 Sep 1982

3040-01-137-5912
Shouldered Shaft

011375912
21109600: RNCC: 3 | RNVC: 2
211096: RNCC: 5 | RNVC: 9

29 Aug 1982

3040-01-137-2518
Straight Shaft

011372518
586488: RNCC: 3 | RNVC: 2
586488: RNCC: 5 | RNVC: 2

23 Aug 1982

3040-01-136-9166
Shouldered Shaft

011369166
527197: RNCC: 3 | RNVC: 2
527197: RNCC: 5 | RNVC: 2

17 Aug 1982

3040-01-136-9164
Straight Shaft

011369164
527345: RNCC: 3 | RNVC: 2
527345: RNCC: 5 | RNVC: 2

17 Aug 1982

3040-01-136-9165
Straight Shaft

011369165
531009: RNCC: 3 | RNVC: 2
531009: RNCC: 5 | RNVC: 2

17 Aug 1982

3040-01-136-9163
Straight Shaft

011369163
527343: RNCC: 3 | RNVC: 2

17 Aug 1982

3040-01-136-5931
Straight Shaft

011365931
531010: RNCC: 3 | RNVC: 2
531010: RNCC: 5 | RNVC: 2

12 Aug 1982

3040-01-136-5035
Straight Shaft

011365035
527282: RNCC: 3 | RNVC: 2

10 Aug 1982

3040-01-136-5036
Shouldered Shaft

011365036
723042: RNCC: 3 | RNVC: 2
723042: RNCC: 5 | RNVC: 2
723042: RNCC: 5 | RNVC: 9

10 Aug 1982

3040-01-136-4628
Nonrotating Shaft Eye Bracket

011364628
11684240: RNCC: 3 | RNVC: 2

9 Aug 1982

3040-01-136-2447
Brake Shoe

011362447
915F84-1: RNCC: 3 | RNVC: 2
915F84-F1: RNCC: 5 | RNVC: 2

5 Aug 1982

3040-01-063-5653
Linear Actuating Cylinder Cap

010635653
11675660: RNCC: 3 | RNVC: 2

9 Aug 1978

3040-01-135-8953
Control Cam

011358953
2664904: RNCC: 3 | RNVC: 2

30 Jul 1982

3040-01-135-7963
Linear Actuating Cylinder Assembly

011357963
5129010: RNCC: 3 | RNVC: 2
006182V001: RNCC: 5 | RNVC: 2
5129010: RNCC: 5 | RNVC: 2

30 Jul 1982

3040-01-135-2192
Shaft

011352192
X218993A: RNCC: 3 | RNVC: 2

20 Jul 1982

3040-01-134-8362
Rotating Shaft Eye Bracket

011348362
70103-08103-045: RNCC: 3 | RNVC: 2
3040PL2008878: RNCC: 6 | RNVC: 9

10 Jul 1982

3040-01-134-6613
Shouldered Shaft

011346613
C-646081: RNCC: 3 | RNVC: 2

7 Jul 1982

3040-01-134-3480
Shouldered Shaft

011343480
199410: RNCC: 3 | RNVC: 2

3 Jul 1982

3040-01-134-3424
Water Pump Shaft

011343424
2251154-2: RNCC: 3 | RNVC: 2
2251154-2: RNCC: 3 | RNVC: 9

3 Jul 1982

3040-01-133-8781
Shouldered Shaft

011338781
BH23553: RNCC: 3 | RNVC: 2

22 Jun 1982

3040-01-133-8058
Ball Joint

011338058
12031: RNCC: 3 | RNVC: 2
SPM-6-S: RNCC: 5 | RNVC: 2

22 Jun 1982

3040-01-133-7850
Gear Shaft

011337850
J143707: RNCC: 3 | RNVC: 2
E20035D001 ITEM 104: RNCC: 5 | RNVC: 2
3040PL0780226: RNCC: 6 | RNVC: 9
C20035D043: RNCC: 7 | RNVC: 2

22 Jun 1982

3040-01-133-7736
Straight Shaft

011337736
1949-K500-6301: RNCC: 3 | RNVC: 2
K-500-6301: RNCC: 3 | RNVC: 2

20 Jun 1982

3040-01-133-6981
Remote Control Lever

011336981
3269412: RNCC: 3 | RNVC: 2

19 Jun 1982

3040-01-060-9576
Pawl

010609576
240859-001: RNCC: 3 | RNVC: 9

8 Jun 1978

3040-01-133-5766
Spur Gearshaft

011335766
182660-1: RNCC: 3 | RNVC: 2
182175-1: RNCC: 5 | RNVC: 9
182175: RNCC: D | RNVC: 9

16 Jun 1982

3040-01-133-4975
Spur Gearshaft

011334975
182242-1: RNCC: 3 | RNVC: 2
182242: RNCC: D | RNVC: 9

15 Jun 1982

3040-01-133-4199
Body Hub

011334199
A025-2032: RNCC: 3 | RNVC: 2
A025-2032: RNCC: 5 | RNVC: 9
A025-2032: RNCC: 5 | RNVC: 9
A125-0111: RNCC: D | RNVC: 9

13 Jun 1982

3040-01-060-4162
Linear Actuating Cylinder Head

010604162
12007647: RNCC: 3 | RNVC: 2

20 May 1978

3040-01-132-6846
Gearshaft Assembly

011326846
2391334-3: RNCC: 3 | RNVC: 2
2391334-3: RNCC: 3 | RNVC: 9

3 Jun 1982

3040-01-132-1747
Rigid Connecting Link

011321747
SM-C-374926: RNCC: 3 | RNVC: 2

24 May 1982

3040-01-132-1246
Linear Actuating Cylinder

011321246
N7750: RNCC: 3 | RNVC: 2
322795: RNCC: 5 | RNVC: 2
322795: RNCC: 5 | RNVC: 9

22 May 1982

3040-01-132-1200
Linear Actuating Cylinder Assembly

011321200
10834: RNCC: 3 | RNVC: 9

22 May 1982

3040-01-132-0066
Hub Clamp

011320066
L6-1: RNCC: 3 | RNVC: 2
DL61: RNCC: 5 | RNVC: 9
640132P4: RNCC: C | RNVC: 1

20 May 1982

3040-01-131-8438
Manual Control Lever

011318438
048459: RNCC: 3 | RNVC: 9
B48459: RNCC: 5 | RNVC: 9

18 May 1982

3040-01-131-6237
Rigid Connecting Link

011316237
SM-C-374925: RNCC: 3 | RNVC: 2

13 May 1982

3040-01-131-3356
Flexible Drive Shaft

011313356
214435: RNCC: 3 | RNVC: 2
33180034: RNCC: 3 | RNVC: 2

7 May 1982

3040-01-058-4837
Straight Shaft

010584837
137195-0001: RNCC: 3 | RNVC: 2

28 Mar 1978

3040-01-058-4834
Straight Shaft

010584834
137191-0001: RNCC: 3 | RNVC: 2

28 Mar 1978

3040-01-130-8780
Straight Shaft

011308780
30-60: RNCC: 3 | RNVC: 2
7300-56: RNCC: 5 | RNVC: 9

29 Apr 1982

3040-01-130-6533
Rigid Connecting Link

011306533
77494: RNCC: 3 | RNVC: 2
77494: RNCC: 5 | RNVC: 9
10399488: RNCC: 6 | RNVC: 9

28 Apr 1982

3040-01-130-3315
Shouldered Shaft

011303315
320-1759-000: RNCC: 3 | RNVC: 2
FA56-CGQ26: RNCC: 5 | RNVC: 2

20 Apr 1982

3040-01-130-1681
Shouldered Shaft

011301681
12312078: RNCC: 3 | RNVC: 2

17 Apr 1982

3040-01-129-7757
Shouldered Shaft

011297757
SM-B-413806: RNCC: 3 | RNVC: 2
SM-B-413806: RNCC: 5 | RNVC: 2
3040011297757: RNCC: 6 | RNVC: 9

10 Apr 1982

3040-01-129-2088
Idler Shaft

011292088
2391326-1: RNCC: 3 | RNVC: 2
2391326-1: RNCC: 3 | RNVC: 9

4 Apr 1982

3040-01-129-0827
Body Hub

011290827
8921203: RNCC: 3 | RNVC: 2
92-1273: RNCC: 5 | RNVC: 2
8921203: RNCC: 5 | RNVC: 9

31 Mar 1982

3040-01-128-6302
Cam

011286302
7728-89: RNCC: 3 | RNVC: 2

26 Mar 1982

3040-01-128-5748
Remote Control Lever

011285748
11623344: RNCC: 3 | RNVC: 2

25 Mar 1982

3040-01-128-5747
Remote Control Lever

011285747
11623343: RNCC: 3 | RNVC: 2

25 Mar 1982

3040-01-127-5633
Straight Shaft

011275633
8626410: RNCC: 3 | RNVC: 2

3 Mar 1982

3040-01-126-7516
Body Hub

011267516
7979324-1: RNCC: 3 | RNVC: 2

17 Feb 1982

3040-01-126-4973
Nonrotating Shaft Eye Bracket

011264973
MD032K20-002: RNCC: 3 | RNVC: 2

11 Feb 1982

3040-01-125-9832
Linear Actuating Cylinder

011259832
4915061-8: RNCC: 3 | RNVC: 2
BR25.072: RNCC: 5 | RNVC: 2
4915061: RNCC: 5 | RNVC: 2
44824: RNCC: 5 | RNVC: 9
A44824: RNCC: C | RNVC: 1

3 Feb 1982

3040-01-125-9781
Shouldered Shaft

011259781
142864-0001: RNCC: 3 | RNVC: 2
142864: RNCC: D | RNVC: 9

3 Feb 1982

3040-01-125-6525
Remote Control Lever

011256525
4N6322: RNCC: 3 | RNVC: 2

30 Jan 1982

3040-01-125-5892
Straight Shaft

011255892
3N2815: RNCC: 3 | RNVC: 2

29 Jan 1982

3040-01-125-5459
Rigid Connecting Link

011255459
70217-02708-121: RNCC: 3 | RNVC: 2
3040PL1939681: RNCC: 6 | RNVC: 9

29 Jan 1982

3040-01-125-4522
Governor Drive Shaft

011254522
4N5623: RNCC: 3 | RNVC: 2

27 Jan 1982

3040-01-125-4505
Straight Shaft

011254505
5R3625: RNCC: 3 | RNVC: 2

27 Jan 1982

3040-01-125-4504
Straight Shaft

011254504
142862-0001: RNCC: 3 | RNVC: 2
142862: RNCC: D | RNVC: 9

27 Jan 1982

3040-01-125-4283
Bell Crank

011254283
12307483: RNCC: 3 | RNVC: 2

27 Jan 1982

3040-01-124-9365
Straight Shaft

011249365
SM-D-374916-2: RNCC: 3 | RNVC: 2
SM-D-374916: RNCC: D | RNVC: 9

16 Jan 1982

3040-01-124-8891
Linear Actuating Cylinder Assembly Parts Kit

011248891
44547: RNCC: 3 | RNVC: 9
A44547: RNCC: 5 | RNVC: 9
4915245-7: RNCC: C | RNVC: 1

15 Jan 1982

3040-01-124-5330
Linear Actuating Cylinder Assembly Parts Kit

011245330
44548: RNCC: 3 | RNVC: 9
A44548: RNCC: 5 | RNVC: 9

6 Jan 1982

3040-01-123-6741
Shouldered Shaft

011236741
10277231-3: RNCC: 3 | RNVC: 2

16 Dec 1981

3040-01-122-7945
Rigid Connecting Link

011227945
2663015: RNCC: 3 | RNVC: 2
2663015: RNCC: 5 | RNVC: 2
10159284: RNCC: 6 | RNVC: 9

28 Nov 1981

3040-01-122-6176
Mechanical Drive Housing

011226176
12267137: RNCC: 3 | RNVC: 2

26 Nov 1981

3040-01-122-1410
Rigid Connecting Link

011221410
SR3250A: RNCC: 3 | RNVC: 2

15 Nov 1981

3040-01-122-0115
Linear Actuating Cylinder Piston Rod

011220115
MC15080: RNCC: 3 | RNVC: 2

13 Nov 1981

3040-01-121-6409
Flexible Shaft Assembly

011216409
1880538-7: RNCC: 3 | RNVC: 2

6 Nov 1981

3040-01-121-2116
Straight Shaft

011212116
12265868-5: RNCC: 3 | RNVC: 2
12265868: RNCC: D | RNVC: 9

1 Nov 1981

3040-01-121-1553
Shaft Retaining Plate

011211553
13211E3189: RNCC: 3 | RNVC: 2

31 Oct 1981

3040-01-121-1443
Gear Operator Case

011211443
J001957-001: RNCC: 3 | RNVC: 2
A63012 PIECE 1: RNCC: 5 | RNVC: 2
1957-001: RNCC: 5 | RNVC: 9

31 Oct 1981

3040-01-121-1406
Shaft Retaining Plate

011211406
12309944: RNCC: 3 | RNVC: 2

31 Oct 1981

3040-01-121-0601
Shouldered Shaft

011210601
1N7173: RNCC: 3 | RNVC: 2

30 Oct 1981

3040-01-120-3745
Bevel Gearshaft

011203745
RG38464-1: RNCC: 3 | RNVC: 2
3040011203745: RNCC: 6 | RNVC: 9

18 Oct 1981

3040-01-120-2164
Manual Control Lever

011202164
12300596: RNCC: 3 | RNVC: 2
59-002195: RNCC: 5 | RNVC: 9

13 Oct 1981

3040-01-120-1081
Flexible Core End Fitting

011201081
821875: RNCC: 3 | RNVC: 2
120416A: RNCC: 5 | RNVC: 2
120416: RNCC: 5 | RNVC: 9
120416A: RNCC: 5 | RNVC: 9

11 Oct 1981

3040-01-120-0207
Rigid Connecting Link

011200207
2361441-2: RNCC: 3 | RNVC: 9
2361441-2: RNCC: C | RNVC: 1

9 Oct 1981

3040-01-119-8711
Mechanical Drive Housing

011198711
7954588: RNCC: 3 | RNVC: 2

7 Oct 1981

3040-01-119-7786
Rigid Connecting Link

011197786
12300148-2: RNCC: 3 | RNVC: 2
10085860: RNCC: 6 | RNVC: 9

4 Oct 1981

3040-01-119-7664
Push-Pull Control Assembly

011197664
48701-022: RNCC: 3 | RNVC: 2
B49701-000-0022.0: RNCC: 3 | RNVC: 2
13217E6815-4: RNCC: 5 | RNVC: 2
48711-000-0022: RNCC: 5 | RNVC: 2
48701-022: RNCC: 5 | RNVC: 9
B48701-000-0022.0: RNCC: 5 | RNVC: 9
13217E6815: RNCC: 7 | RNVC: 1

3 Oct 1981

3040-01-119-7666
Flexible Shaft Assembly Core

011197666
M10215-1F418: RNCC: 2 | RNVC: 2
MIL-DTL-10215: RNCC: 4 | RNVC: 1
MS51072-18: RNCC: 5 | RNVC: 9

3 Oct 1981

3040-01-119-5391
Shouldered Shaft

011195391
979-1-B160: RNCC: 3 | RNVC: 9
979-1-B160: RNCC: 5 | RNVC: 9

25 Sep 1981

3040-01-119-3247
Vehicular Steering Shaft Shoe

011193247
2800738: RNCC: 3 | RNVC: 2
2800738: RNCC: C | RNVC: 1

23 Sep 1981

3040-01-119-1533
Straight Shaft

011191533
T20071: RNCC: 3 | RNVC: 2
20071: RNCC: 5 | RNVC: 1
T20071: RNCC: 5 | RNVC: 9

19 Sep 1981

3040-01-119-0109
Shouldered Shaft

011190109
10109657: RNCC: 3 | RNVC: 2
10109657: RNCC: 5 | RNVC: 2

16 Sep 1981

3040-01-118-8706
Shouldered Shaft

011188706
12309943: RNCC: 3 | RNVC: 2

13 Sep 1981

3040-01-118-6095
Hub Clamp

011186095
3599-100: RNCC: 3 | RNVC: 2
CG1-6: RNCC: 5 | RNVC: 9
11732775: RNCC: 7 | RNVC: 1

6 Sep 1981

3040-01-118-5840
Linear Actuating Cylinder Assembly Parts Kit

011185840
1804441-7: RNCC: 3 | RNVC: 2
R433035487: RNCC: 5 | RNVC: 9

5 Sep 1981

3040-01-118-4538
Mechanical Drive Housing

011184538
C-3107-126: RNCC: 3 | RNVC: 9

4 Sep 1981

3040-01-118-3931
Straight Shaft

011183931
4819992-1: RNCC: 3 | RNVC: 2
4819992: RNCC: D | RNVC: 9

3 Sep 1981

3040-01-117-8053
Shouldered Shaft

011178053
2227070-1: RNCC: 3 | RNVC: 2

23 Aug 1981

3040-01-117-7368
Rigid Connecting Link

011177368
114P2049-10: RNCC: 3 | RNVC: 2

21 Aug 1981

3040-01-117-6440
Manual Control Lever

011176440
323614: RNCC: 3 | RNVC: 9
4906147-6: RNCC: 5 | RNVC: 2
74906147: RNCC: 5 | RNVC: 2
197550: RNCC: 5 | RNVC: 2
WU323614: RNCC: 5 | RNVC: 2
197550: RNCC: 5 | RNVC: 2
197550: RNCC: 5 | RNVC: 9
4906146: RNCC: D | RNVC: 9

19 Aug 1981

3040-01-117-5560
Linear Actuating Cylinder Assembly Parts Kit

011175560
AR100407: RNCC: 3 | RNVC: 2
AR10047: RNCC: 3 | RNVC: 9
AR1000407: RNCC: 5 | RNVC: 9
AR100407: RNCC: 5 | RNVC: 9
AR88711: RNCC: 5 | RNVC: 9
AR1000407: RNCC: 5 | RNVC: 9

16 Aug 1981

3040-01-117-5551
Ball Joint

011175551
0917194-3: RNCC: 3 | RNVC: 2

16 Aug 1981

3040-01-117-5234
Shouldered Shaft

011175234
4860343-5: RNCC: 3 | RNVC: 2

15 Aug 1981

3040-01-117-5222
Straight Shaft

011175222
T20091: RNCC: 3 | RNVC: 2
T20091: RNCC: 5 | RNVC: 9

15 Aug 1981

3040-01-117-3753
Pawl

011173753
4827856-8: RNCC: 3 | RNVC: 2
74827856: RNCC: 3 | RNVC: 2

13 Aug 1981

3040-01-117-3319
Spur Gearshaft

011173319
AR62978: RNCC: 3 | RNVC: 2
AR62978: RNCC: 5 | RNVC: 9

13 Aug 1981

3040-01-117-1953
Idler Gear Shaft

011171953
T26323: RNCC: 3 | RNVC: 2

9 Aug 1981

3040-01-117-1921
Manual Control Lever

011171921
AR52556: RNCC: 3 | RNVC: 2
FP1545: RNCC: 3 | RNVC: 2
AR52556: RNCC: 5 | RNVC: 9

9 Aug 1981

3040-01-117-0897
Push-Pull Control Assembly

011170897
D037911-002-0080.0: RNCC: 3 | RNVC: 9
6005-050-0210: RNCC: 5 | RNVC: 2
LA-1554-6: RNCC: 5 | RNVC: 9
D037911-002-0080.0: RNCC: 5 | RNVC: 9
D037911-002-080: RNCC: 5 | RNVC: 9
LA-1554: RNCC: D | RNVC: 9

8 Aug 1981

3040-01-117-0584
Nonrotating Shaft Eye Bracket

011170584
12311928: RNCC: 3 | RNVC: 2

8 Aug 1981

3040-01-117-0585
Shaft Retaining Plate

011170585
12311879: RNCC: 3 | RNVC: 2

8 Aug 1981

3040-01-116-9233
Shouldered Shaft

011169233
M300006: RNCC: 3 | RNVC: 2

6 Aug 1981

3040-01-116-5905
Manual Control Lever

011165905
5914-4: RNCC: 3 | RNVC: 2
7070-1: RNCC: 5 | RNVC: 9

30 Jul 1981

3040-01-116-4941
Control Cam

011164941
P-250-2: RNCC: 3 | RNVC: 2

28 Jul 1981

3040-01-116-4323
Shouldered Shaft

011164323
145C3051-1: RNCC: 3 | RNVC: 2
145C3051-1: RNCC: 5 | RNVC: 2
145C3051-1: RNCC: 5 | RNVC: 9

26 Jul 1981

Load More Results