What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 153 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 153 of 300

3040-01-219-5713
Linear Actuating Cylinder

012195713
HY-297: RNCC: 3 | RNVC: 2

29 Oct 1985

3040-01-219-5696
Worm Wheel Gearshaft

012195696
78000-0440: RNCC: 3 | RNVC: 2
1541: RNCC: 5 | RNVC: 2
61541: RNCC: 5 | RNVC: 2

29 Oct 1985

3040-01-219-4497
Push-Pull Control Assembly

012194497
100046: RNCC: 3 | RNVC: 9
37931C1: RNCC: 5 | RNVC: 2
869245C91: RNCC: 5 | RNVC: 9

26 Oct 1985

3040-01-219-4476
Linear Actuating Cylinder

012194476
HY-301: RNCC: 3 | RNVC: 2

26 Oct 1985

3040-01-219-3127
Straight Shaft

012193127
S000-25-2959: RNCC: 3 | RNVC: 2

25 Oct 1985

3040-01-219-1579
Mechanical Drive Housing

012191579
12471387: RNCC: 3 | RNVC: 2
26039771: RNCC: 5 | RNVC: 9
26004521: RNCC: 5 | RNVC: 9
14018239: RNCC: 5 | RNVC: 9
26004521: RNCC: 5 | RNVC: 9

22 Oct 1985

3040-01-218-8167
Linear Actuating Cylinder

012188167
HY-293: RNCC: 3 | RNVC: 2

18 Oct 1985

3040-01-218-8166
Linear Actuating Cylinder

012188166
UP-217: RNCC: 3 | RNVC: 2

18 Oct 1985

3040-01-218-8165
Linear Actuating Cylinder

012188165
HY-294: RNCC: 3 | RNVC: 2

18 Oct 1985

3040-01-218-8146
Linear Actuating Cylinder Head

012188146
HV-134: RNCC: 3 | RNVC: 2

18 Oct 1985

3040-01-218-8145
Linear Actuating Cylinder Piston Rod

012188145
HSK-238: RNCC: 3 | RNVC: 2

18 Oct 1985

3040-01-218-8144
Linear Actuating Cylinder Piston

012188144
HSK-241: RNCC: 3 | RNVC: 2

18 Oct 1985

3040-01-218-8143
Linear Actuating Cylinder Piston

012188143
HK-123: RNCC: 3 | RNVC: 2
25093 ITEM 9: RNCC: 5 | RNVC: 2
25093: RNCC: D | RNVC: 9

18 Oct 1985

3040-01-218-8141
Linear Actuating Cylinder Piston

012188141
HK-122: RNCC: 3 | RNVC: 2
25076 ITEM 5: RNCC: 5 | RNVC: 9
25076: RNCC: D | RNVC: 9

18 Oct 1985

3040-01-218-8142
Linear Actuating Cylinder Piston

012188142
HSK-237: RNCC: 3 | RNVC: 2

18 Oct 1985

3040-01-218-6552
Straight Shaft

012186552
10136-3: RNCC: 3 | RNVC: 2
10136-3: RNCC: 5 | RNVC: 2
10136-3: RNCC: 5 | RNVC: 9
10136-3: RNCC: 5 | RNVC: 9

17 Oct 1985

3040-01-218-5216
Linear Actuating Cylinder Assembly

012185216
UP-221: RNCC: 3 | RNVC: 2

14 Oct 1985

3040-01-218-5025
Linear Actuating Cylinder Assembly Parts Kit

012185025
AR105387: RNCC: 3 | RNVC: 2
AR96530: RNCC: 3 | RNVC: 2

14 Oct 1985

3040-01-218-4695
Linear Actuating Cylinder Piston

012184695
9510762: RNCC: 3 | RNVC: 2
9200375: RNCC: 3 | RNVC: 9
9200488: RNCC: 5 | RNVC: 9

12 Oct 1985

3040-01-218-3839
Control Cam

012183839
100011-1: RNCC: 3 | RNVC: 2
100011-1: RNCC: 5 | RNVC: 9

11 Oct 1985

3040-01-218-3630
Linear Actuating Cylinder

012183630
HY-302: RNCC: 3 | RNVC: 2

10 Oct 1985

3040-01-218-3635
Linear Actuating Cylinder Assembly

012183635
UP-222: RNCC: 3 | RNVC: 2

10 Oct 1985

3040-01-218-3629
Linear Actuating Cylinder

012183629
HY-295: RNCC: 3 | RNVC: 2

10 Oct 1985

3040-01-218-3586
Linear Actuating Cylinder Head

012183586
HV-136: RNCC: 3 | RNVC: 2
25076 ITEM 3: RNCC: 5 | RNVC: 2
25076: RNCC: D | RNVC: 9

10 Oct 1985

3040-01-218-3587
Linear Actuating Cylinder Head

012183587
HV-138: RNCC: 3 | RNVC: 2

10 Oct 1985

3040-01-218-3574
Shouldered Shaft

012183574
AT47333: RNCC: 3 | RNVC: 2
AT47333: RNCC: 5 | RNVC: 9
AT47333: RNCC: 5 | RNVC: 9

10 Oct 1985

3040-01-218-2019
Rigid Connecting Link

012182019
100891-1: RNCC: 3 | RNVC: 2
100891: RNCC: C | RNVC: 1

8 Oct 1985

3040-01-218-1987
Linear Actuating Cylinder

012181987
HY-298: RNCC: 3 | RNVC: 2

8 Oct 1985

3040-01-218-1961
Linear Actuating Cylinder Piston

012181961
HSK-239: RNCC: 3 | RNVC: 2

8 Oct 1985

3040-01-218-1962
Linear Actuating Cylinder Head

012181962
HV-137: RNCC: 3 | RNVC: 2

8 Oct 1985

3040-01-218-1872
Mechanical Drive Housing

012181872
14-02-659-012: RNCC: 3 | RNVC: 9
14-02-659-012: RNCC: 5 | RNVC: 9
665979: RNCC: C | RNVC: 1
226105: RNCC: C | RNVC: 1

8 Oct 1985

3040-01-218-1873
Mechanical Drive Housing

012181873
14-02-159-007: RNCC: 3 | RNVC: 2
14-02-159-007: RNCC: 5 | RNVC: 2
14-02-159-007: RNCC: 5 | RNVC: 2
14-02-159-007: RNCC: 5 | RNVC: 9
2CD942: RNCC: C | RNVC: 1

8 Oct 1985

3040-01-218-1871
Mechanical Drive Housing

012181871
14-02-159-008: RNCC: 3 | RNVC: 2
14-02-159-008: RNCC: 5 | RNVC: 2
14-02-159-008: RNCC: 5 | RNVC: 2
14-02-159-008: RNCC: 5 | RNVC: 9
2CD943: RNCC: C | RNVC: 1

8 Oct 1985

3040-01-218-1870
Mechanical Drive Housing

012181870
14-02-659-013: RNCC: 3 | RNVC: 2
14-02-659-013: RNCC: 5 | RNVC: 9

8 Oct 1985

3040-01-187-0990
Body Hub

011870990
239073: RNCC: 3 | RNVC: 2
239073: RNCC: 5 | RNVC: 9

18 Aug 1984

3040-01-217-8217
Remote Control Lever

012178217
8V7659: RNCC: 3 | RNVC: 2

3 Oct 1985

3040-01-217-8200
Linear Actuating Cylinder

012178200
AU13860: RNCC: 3 | RNVC: 2
AU13860: RNCC: 5 | RNVC: 9

3 Oct 1985

3040-01-217-8180
Linear Actuating Cylinder Head

012178180
RE56545: RNCC: 3 | RNVC: 2
AR100074: RNCC: 5 | RNVC: 9

3 Oct 1985

3040-01-217-3658
Linear Actuating Cylinder Piston

012173658
U17349: RNCC: 3 | RNVC: 2
U17349: RNCC: 5 | RNVC: 9

26 Sep 1985

3040-01-217-2652
Shouldered Shaft

012172652
033-70567: RNCC: 3 | RNVC: 2

23 Sep 1985

3040-01-217-1258
Rotating Shaft Eye Bracket

012171258
3-73013-7: RNCC: 3 | RNVC: 9
3-73013-7: RNCC: 5 | RNVC: 2
3-73013-7: RNCC: C | RNVC: 1

22 Sep 1985

3040-01-185-4371
Shouldered Shaft

011854371
8J8253: RNCC: 3 | RNVC: 2

29 Jul 1984

3040-01-216-7573
Guide Roller Assemb

012167573
527388: RNCC: 3 | RNVC: 2

16 Sep 1985

3040-01-216-7429
Remote Control Lever

012167429
1360520: RNCC: 3 | RNVC: 2
1360520: RNCC: 5 | RNVC: 9

16 Sep 1985

3040-01-216-6815
Shaft Collar

012166815
5WR1101-7: RNCC: 3 | RNVC: 2
5WR1101-7: RNCC: 5 | RNVC: 9
5WR1101: RNCC: 5 | RNVC: 9
5WR1101: RNCC: D | RNVC: 9

14 Sep 1985

3040-01-216-5127
Ball Joint

012165127
E0TZ3050C: RNCC: 3 | RNVC: 9
E0TZ3050C: RNCC: 5 | RNVC: 9

12 Sep 1985

3040-01-216-3003
Shouldered Shaft

012163003
12022: RNCC: 3 | RNVC: 2

7 Sep 1985

3040-01-216-2741
Manual Control Lever

012162741
CA200576: RNCC: 3 | RNVC: 2
1G40905: RNCC: 5 | RNVC: 9

7 Sep 1985

3040-01-216-2494
Rigid Connecting Link

012162494
574729: RNCC: 3 | RNVC: 2
574729: RNCC: 5 | RNVC: 9

7 Sep 1985

3040-01-216-2335
Ball Joint Parts Kit

012162335
E0TZ3049B: RNCC: 3 | RNVC: 9
E0TZ3049B: RNCC: 5 | RNVC: 9

7 Sep 1985

3040-01-215-9885
Mechanical Drive Housing

012159885
5212746: RNCC: 3 | RNVC: 9

4 Sep 1985

3040-01-215-8853
Rotating Shaft Eye Bracket

012158853
12302840: RNCC: 3 | RNVC: 2

1 Sep 1985

3040-01-215-6646
Linear Actuating Cylinder Assembly

012156646
301271B: RNCC: 3 | RNVC: 2
2CX393: RNCC: 5 | RNVC: 2
2CX393: RNCC: 5 | RNVC: 9
8310-009-RA: RNCC: 5 | RNVC: 9

29 Aug 1985

3040-01-215-4724
Brake Shoe

012154724
A3002052: RNCC: 3 | RNVC: 2

25 Aug 1985

3040-01-215-3539
Shouldered Shaft

012153539
C0120098300: RNCC: 3 | RNVC: 2
120-0983: RNCC: 5 | RNVC: 9

23 Aug 1985

3040-01-215-3264
Shouldered Shaft

012153264
101459-1: RNCC: 3 | RNVC: 2
101459-1: RNCC: 5 | RNVC: 2

23 Aug 1985

3040-01-215-1855
Rigid Connecting Link

012151855
5000391: RNCC: 3 | RNVC: 2

22 Aug 1985

3040-01-215-1858
Shaft Retaining Plate

012151858
CB65394: RNCC: 3 | RNVC: 2
CD65393 PIECE 5: RNCC: 5 | RNVC: 2

22 Aug 1985

3040-01-215-0717
Spur Gearshaft

012150717
22021690: RNCC: 3 | RNVC: 2
22021690: RNCC: 5 | RNVC: 9

21 Aug 1985

3040-01-214-9215
Push-Pull Control Assembly

012149215
D304953-004-0151.6: RNCC: 3 | RNVC: 9
5T7450: RNCC: 5 | RNVC: 2
4061-075-0396: RNCC: 5 | RNVC: 2
D304953-004-0151.6: RNCC: 5 | RNVC: 9

17 Aug 1985

3040-01-214-9085
Pawl

012149085
202514: RNCC: 3 | RNVC: 2
10138: RNCC: 5 | RNVC: 2
95-W1-1H ITEM 14: RNCC: 5 | RNVC: 2

17 Aug 1985

3040-01-214-9031
Helical Gearshaft

012149031
890289: RNCC: 3 | RNVC: 2
421416C1: RNCC: 5 | RNVC: 2
482358C1: RNCC: 5 | RNVC: 2
90002931: RNCC: 5 | RNVC: 2

17 Aug 1985

3040-01-214-9034
Mechanical Drive Housing

012149034
00510891: RNCC: 3 | RNVC: 9

17 Aug 1985

3040-01-214-9030
Bevel Gearshaft

012149030
A-35126-1: RNCC: 3 | RNVC: 2
A-13126-3: RNCC: 5 | RNVC: 9
A-35126-1: RNCC: 5 | RNVC: 9
00501468: RNCC: 5 | RNVC: 9

17 Aug 1985

3040-01-214-8993
Tension Arm

012148993
202522: RNCC: 3 | RNVC: 2
10142: RNCC: 5 | RNVC: 2
95-W1-1H ITEM 22: RNCC: 5 | RNVC: 2

17 Aug 1985

3040-01-214-8645
Manual Control Lever

012148645
2101114-01: RNCC: 3 | RNVC: 2
410360: RNCC: 5 | RNVC: 9

16 Aug 1985

3040-01-214-8431
Straight Shaft

012148431
65015112-000: RNCC: 3 | RNVC: 2

16 Aug 1985

3040-01-214-3835
Straight Shaft

012143835
93014-991: RNCC: 3 | RNVC: 9
4537409-034: RNCC: 5 | RNVC: 9

9 Aug 1985

3040-01-214-2579
Remote Control Lever

012142579
4D2498: RNCC: 3 | RNVC: 2

8 Aug 1985

3040-01-214-2580
Remote Control Lever

012142580
8W0317: RNCC: 3 | RNVC: 2

8 Aug 1985

3040-01-213-9332
Shaft

012139332
351249: RNCC: 3 | RNVC: 2
351249: RNCC: 5 | RNVC: 2
351249: RNCC: C | RNVC: 1

2 Aug 1985

3040-01-213-8553
Shaft Collar

012138553
122760C: RNCC: 3 | RNVC: 2
122760C: RNCC: 5 | RNVC: 9

1 Aug 1985

3040-01-213-8091
Control Cam

012138091
8332109: RNCC: 3 | RNVC: 2

31 Jul 1985

3040-01-213-7759
Guide Rack

012137759
3214-7008-5: RNCC: 3 | RNVC: 2
2BV578: RNCC: 3 | RNVC: 2
01055720: RNCC: 5 | RNVC: 9
2BC578: RNCC: 5 | RNVC: 9
2BV578: RNCC: 5 | RNVC: 9

30 Jul 1985

3040-01-213-7501
Male Brake Assembly

012137501
114349: RNCC: 3 | RNVC: 9
SM-D-423565: RNCC: 5 | RNVC: 9

30 Jul 1985

3040-01-179-9209
Remote Control Lever

011799209
8330895: RNCC: 3 | RNVC: 2
3020011799209: RNCC: 5 | RNVC: 9
3020011799209: RNCC: 6 | RNVC: 9

22 May 1984

3040-01-179-3742
Helical Gearshaft

011793742
1-030-191-11: RNCC: 3 | RNVC: 2
1-030-191R10: RNCC: 5 | RNVC: 2
1-030-191-11: RNCC: 5 | RNVC: 9
1-030-191R10: RNCC: 5 | RNVC: 9
1-030-191-11: RNCC: 7 | RNVC: 2

17 May 1984

3040-01-213-4544
Control Cam

012134544
7W1321: RNCC: 3 | RNVC: 2

26 Jul 1985

3040-01-213-3546
Bevel Gearshaft

012133546
330528-1: RNCC: 3 | RNVC: 9
SM-C-807528-2: RNCC: 5 | RNVC: 1
SM-C-807528-2: RNCC: D | RNVC: 9

25 Jul 1985

3040-01-212-9625
Extension Shaft

012129625
384-1576-01: RNCC: 3 | RNVC: 2

20 Jul 1985

3040-01-178-3005
Shouldered Shaft

011783005
101A802AB1: RNCC: 3 | RNVC: 9
E-3288508 PIECE 27: RNCC: 5 | RNVC: 9
101A802AB1: RNCC: 5 | RNVC: 9
101A802AB1: RNCC: C | RNVC: 1
101A802AB1: RNCC: C | RNVC: 1
101A802AB: RNCC: D | RNVC: 9

3 May 1984

3040-01-212-8312
Manual Control Lever

012128312
E2TZ7210J: RNCC: 3 | RNVC: 9
E2TZ7210J: RNCC: 5 | RNVC: 9

19 Jul 1985

3040-01-212-6840
Straight Shaft

012126840
MG0-1005-204: RNCC: 3 | RNVC: 2
MG0-1N PIECE 4: RNCC: 5 | RNVC: 9
MG0-IN PIECE 4: RNCC: 5 | RNVC: 9
MG0-1005-204 ITEM 4: RNCC: 5 | RNVC: 9

17 Jul 1985

3040-01-212-6730
Shouldered Shaft

012126730
SM-D-969745-3: RNCC: 3 | RNVC: 2

17 Jul 1985

3040-01-212-6731
Shouldered Shaft

012126731
SM-D-969745-4: RNCC: 3 | RNVC: 2
SM-D-969745-4: RNCC: 5 | RNVC: 1
SM-D-969745-4: RNCC: 5 | RNVC: 1

17 Jul 1985

3040-01-212-2661
Nonvehicular Propeller Shaft

012122661
439185: RNCC: 3 | RNVC: 2
387879: RNCC: 5 | RNVC: 9
387879: RNCC: 5 | RNVC: 9
439185: RNCC: 5 | RNVC: 9
387879: RNCC: 5 | RNVC: 9
387879: RNCC: 5 | RNVC: 9
0387879: RNCC: 5 | RNVC: 9
0387879: RNCC: 5 | RNVC: 9
0387879: RNCC: 5 | RNVC: 9

10 Jul 1985

3040-01-212-2498
Remote Control Lever

012122498
13214E2923: RNCC: 3 | RNVC: 2

10 Jul 1985

3040-01-212-1051
Gearshaft

012121051
5106591: RNCC: 3 | RNVC: 2

6 Jul 1985

3040-01-211-7135
Spur Gearshaft

012117135
8923052: RNCC: 3 | RNVC: 2
5106872: RNCC: 5 | RNVC: 9
K-8923052: RNCC: 5 | RNVC: 9

30 Jun 1985

3040-01-175-4562
Drive Shaft

011754562
91347-001: RNCC: 3 | RNVC: 9
LB91347: RNCC: 5 | RNVC: 9
LB 1347: RNCC: 5 | RNVC: 9
LB91347: RNCC: 5 | RNVC: 9
91347-001: RNCC: C | RNVC: 1
91347-001: RNCC: C | RNVC: 1
LB-91347: RNCC: C | RNVC: 1

1 Apr 1984

3040-01-174-7812
Nonrotating Shaft Eye Bracket

011747812
LA64012PIECE12.30: RNCC: 3 | RNVC: 9
LA64012PIECE12.30: RNCC: 5 | RNVC: 9
LA91231: RNCC: 5 | RNVC: 9
LA64012-39: RNCC: 5 | RNVC: 9
LA91231: RNCC: 5 | RNVC: 9
LA64012PIECE12.30: RNCC: C | RNVC: 1
LA91231: RNCC: C | RNVC: 1
LA64012PIECE12.30: RNCC: C | RNVC: 1
LA91231: RNCC: C | RNVC: 1
LA64012: RNCC: D | RNVC: 9

22 Mar 1984

3040-01-174-6440
Manual Control Lever

011746440
5021-8495: RNCC: 3 | RNVC: 9
5021-8495: RNCC: 5 | RNVC: 9
5020-8895: RNCC: 5 | RNVC: 9
5021-8495: RNCC: C | RNVC: 1

21 Mar 1984

3040-01-211-1415
Straight Shaft

012111415
834260: RNCC: 3 | RNVC: 2

21 Jun 1985

3040-01-211-1090
Shaft Retaining Plate

012111090
73490: RNCC: 3 | RNVC: 2

21 Jun 1985

3040-01-211-1041
Spur Gearshaft

012111041
3898851: RNCC: 3 | RNVC: 2

21 Jun 1985

3040-01-210-9581
Shouldered Shaft

012109581
127505-002: RNCC: 3 | RNVC: 2
127505: RNCC: D | RNVC: 9

20 Jun 1985

3040-01-210-8798
Manual Control Lever

012108798
12322875: RNCC: 3 | RNVC: 2

19 Jun 1985

3040-01-210-8764
Shouldered Shaft

012108764
6883197: RNCC: 3 | RNVC: 2
6883197: RNCC: 5 | RNVC: 9
6883197: RNCC: C | RNVC: 1
6700187: RNCC: C | RNVC: 1
6839022: RNCC: C | RNVC: 1
6700187: RNCC: C | RNVC: 1
6839022: RNCC: C | RNVC: 1

19 Jun 1985

3040-01-210-4914
Shouldered Shaft

012104914
13222E0169: RNCC: 3 | RNVC: 2
2530012104914: RNCC: 5 | RNVC: 9
2530012104914: RNCC: 6 | RNVC: 9

13 Jun 1985

3040-01-210-4915
Shouldered Shaft

012104915
13222E0361: RNCC: 3 | RNVC: 2

13 Jun 1985

3040-01-210-0439
Manual Control Lever

012100439
691581: RNCC: 3 | RNVC: 2

6 Jun 1985

3040-01-209-9969
Shouldered Shaft

012099969
729539: RNCC: 3 | RNVC: 2

6 Jun 1985

3040-01-209-6101
Tach Drive Shaft

012096101
5136372: RNCC: 3 | RNVC: 2

3 Jun 1985

3040-01-209-6040
Rigid Connecting Link

012096040
GS-2090R: RNCC: 3 | RNVC: 2
1394240: RNCC: 5 | RNVC: 2
1394240: RNCC: 5 | RNVC: 9

1 Jun 1985

3040-01-209-5171
Bell Crank

012095171
509923: RNCC: 3 | RNVC: 2

31 May 1985

3040-01-209-5120
Mechanical Drive Housing

012095120
123620R: RNCC: 3 | RNVC: 2
123620R: RNCC: 5 | RNVC: 9

31 May 1985

3040-01-209-5121
Mechanical Drive Housing

012095121
123284DU: RNCC: 3 | RNVC: 2
123284DU: RNCC: 5 | RNVC: 9
123152D: RNCC: C | RNVC: 1

31 May 1985

3040-01-209-4499
Brake Band And Lining

012094499
23222A: RNCC: 3 | RNVC: 2
19279 PART 57: RNCC: 5 | RNVC: 2

30 May 1985

3040-01-209-2314
Shouldered Shaft

012092314
1422350: RNCC: 3 | RNVC: 2
1422350: RNCC: 5 | RNVC: 9

25 May 1985

3040-01-209-2316
Shouldered Shaft

012092316
1436780: RNCC: 3 | RNVC: 2
1436780: RNCC: 5 | RNVC: 9

25 May 1985

3040-01-209-2315
Shouldered Shaft

012092315
63218-C: RNCC: 3 | RNVC: 2
63218CX: RNCC: 3 | RNVC: 2
63218-C: RNCC: 5 | RNVC: 9
63218CX: RNCC: 5 | RNVC: 9

25 May 1985

3040-01-209-2309
Straight Shaft

012092309
1422370: RNCC: 3 | RNVC: 2
1422370: RNCC: 5 | RNVC: 9

25 May 1985

3040-01-209-2310
Straight Shaft

012092310
123154C: RNCC: 3 | RNVC: 2
123154C: RNCC: 5 | RNVC: 9

25 May 1985

3040-01-208-9289
Shouldered Shaft

012089289
1N4054: RNCC: 3 | RNVC: 2
4W5552 ITEM 9: RNCC: 5 | RNVC: 2
4W5552: RNCC: D | RNVC: 9

21 May 1985

3040-01-170-5056
Mechanical Drive Housing

011705056
8757660: RNCC: 3 | RNVC: 2
3040011705056: RNCC: 5 | RNVC: 9
3040011705056: RNCC: 6 | RNVC: 9

25 Jan 1984

3040-01-170-5057
Mechanical Drive Housing

011705057
7700131: RNCC: 3 | RNVC: 2
3040011705057: RNCC: 5 | RNVC: 9
3040011705057: RNCC: 6 | RNVC: 9

25 Jan 1984

3040-01-208-7168
Mechanical Drive Housing

012087168
1452020: RNCC: 3 | RNVC: 2
1452020: RNCC: 5 | RNVC: 9

17 May 1985

3040-01-208-6576
Shouldered Shaft

012086576
1422340: RNCC: 3 | RNVC: 2
1422340: RNCC: 5 | RNVC: 9

17 May 1985

3040-01-208-4435
Linear Actuating Cylinder Piston

012084435
942562C3: RNCC: 3 | RNVC: 2
942562C3: RNCC: 3 | RNVC: 9
942562C2: RNCC: 5 | RNVC: 9
942562C1: RNCC: 5 | RNVC: 9

14 May 1985

3040-01-208-4349
Shouldered Shaft

012084349
006-NGE-001-300: RNCC: 3 | RNVC: 2
55-22385-15: RNCC: 3 | RNVC: 2
006NGE0-01-301: RNCC: 5 | RNVC: 9
55-22132-15: RNCC: 5 | RNVC: 9

14 May 1985

3040-01-208-2208
Shaft Retaining Plate

012082208
123359C: RNCC: 3 | RNVC: 2
123359C: RNCC: 5 | RNVC: 9
10356326: RNCC: 6 | RNVC: 9

10 May 1985

3040-01-208-1413
Helical Gearshaft

012081413
122149D: RNCC: 3 | RNVC: 2
122149D: RNCC: 5 | RNVC: 9

9 May 1985

3040-01-208-1412
Helical Gearshaft

012081412
126089D: RNCC: 3 | RNVC: 2
126089D: RNCC: 5 | RNVC: 9

9 May 1985

3040-01-207-9908
Cover

012079908
123201B: RNCC: 3 | RNVC: 2
123201B: RNCC: 5 | RNVC: 9

8 May 1985

3040-01-207-9907
Shaft End Plate

012079907
1422360: RNCC: 3 | RNVC: 2
1422360: RNCC: 5 | RNVC: 9

8 May 1985

3040-01-207-9899
Linear Actuating Cylinder Assembly Parts Kit

012079899
5025: RNCC: 3 | RNVC: 2
240055: RNCC: 3 | RNVC: 2
712997: RNCC: C | RNVC: 1

8 May 1985

3040-01-207-9732
Shouldered Shaft

012079732
1422330: RNCC: 3 | RNVC: 2
1422330: RNCC: 5 | RNVC: 9

8 May 1985

3040-01-207-9661
Speedo Drive End Plate

012079661
1422400: RNCC: 3 | RNVC: 2
1422400: RNCC: 5 | RNVC: 9

8 May 1985

3040-01-207-9628
Shouldered Shaft

012079628
323262: RNCC: 3 | RNVC: 2
323262: RNCC: 3 | RNVC: 9
323626: RNCC: 5 | RNVC: 2
323626: RNCC: 5 | RNVC: 9
323626: RNCC: 5 | RNVC: 9
323626: RNCC: 5 | RNVC: 9
323262: RNCC: 5 | RNVC: 9
323262: RNCC: C | RNVC: 1

8 May 1985

3040-01-207-9239
Linear Actuating Cylinder Assembly

012079239
6-372-002320: RNCC: 3 | RNVC: 2
2CT150: RNCC: 5 | RNVC: 9
2CT150: RNCC: C | RNVC: 1

7 May 1985

3040-01-207-9240
Linear Actuating Cylinder Assembly

012079240
6-372-002270: RNCC: 3 | RNVC: 2
2CT148: RNCC: 5 | RNVC: 9
2CT148: RNCC: C | RNVC: 1

7 May 1985

3040-01-207-9026
Linear Actuating Cylinder Assembly

012079026
6-372-002501: RNCC: 3 | RNVC: 2
2CT156: RNCC: 5 | RNVC: 9
2CT156: RNCC: C | RNVC: 1

7 May 1985

3040-01-207-5637
Rigid Connecting Link

012075637
9366010: RNCC: 3 | RNVC: 2

3 May 1985

3040-01-167-4497
Rigid Connecting Link

011674497
49681: RNCC: 3 | RNVC: 9

29 Nov 1983

3040-01-206-8226
Shaft Collar

012068226
5N2904: RNCC: 3 | RNVC: 2
124-0111 ITEM 7: RNCC: C | RNVC: 1

23 Apr 1985

3040-01-206-7659
Spur Gearshaft

012067659
NF203301-1: RNCC: 3 | RNVC: 9

22 Apr 1985

3040-01-167-1429
Shouldered Shaft

011671429
508198-01: RNCC: 3 | RNVC: 2
508198-01: RNCC: 5 | RNVC: 2
508198-01: RNCC: 5 | RNVC: 2
508198: RNCC: D | RNVC: 9

22 Nov 1983

3040-01-206-6590
Straight Shaft

012066590
3609854-1: RNCC: 3 | RNVC: 2

22 Apr 1985

3040-01-206-6589
Shaft Retaining Plate

012066589
27804: RNCC: 3 | RNVC: 2
27804: RNCC: 5 | RNVC: 9

22 Apr 1985

3040-01-206-6591
Shouldered Shaft

012066591
3860191-1: RNCC: 3 | RNVC: 2
3860191-1: RNCC: 5 | RNVC: 2

22 Apr 1985

3040-01-165-9545
Shouldered Shaft

011659545
202969: RNCC: 3 | RNVC: 2
3040011659545: RNCC: 5 | RNVC: 9
3040011659545: RNCC: 6 | RNVC: 9

5 Nov 1983

3040-01-206-0940
Pawl

012060940
12336106: RNCC: 3 | RNVC: 2

13 Apr 1985

3040-01-206-0915
Shaft Retaining Plate

012060915
390382900: RNCC: 3 | RNVC: 2
CBU1032: RNCC: 5 | RNVC: 2
3903829: RNCC: 5 | RNVC: 9

13 Apr 1985

3040-01-205-9385
Shouldered Shaft

012059385
3-349-040-41M-OB: RNCC: 3 | RNVC: 2
268-1903: RNCC: 5 | RNVC: 2
1249437: RNCC: 5 | RNVC: 9
1W4004: RNCC: 5 | RNVC: 9

12 Apr 1985

3040-01-205-7747
Push-Pull Control Assembly

012057747
2600370-001: RNCC: 3 | RNVC: 2
LE161-0022-0033: RNCC: 7 | RNVC: 2

11 Apr 1985

3040-01-205-4008
Pawl

012054008
12336104-1: RNCC: 3 | RNVC: 2

8 Apr 1985

3040-01-164-3685
Shouldered Shaft

011643685
B-75534-A: RNCC: 3 | RNVC: 9
X75534-A: RNCC: 5 | RNVC: 9
D-84-941-68 PIECE 1: RNCC: 5 | RNVC: 9

15 Oct 1983

3040-01-164-1205
Shouldered Shaft

011641205
B-75646-A: RNCC: 3 | RNVC: 9
X75646-A: RNCC: 5 | RNVC: 9
X75646-A: RNCC: 5 | RNVC: 9
D-86-942-68 PIECE 1: RNCC: 5 | RNVC: 9

12 Oct 1983

3040-01-205-2140
Shouldered Shaft

012052140
3N8451: RNCC: 3 | RNVC: 2

5 Apr 1985

3040-01-204-9929
Control Cam

012049929
70351-08032-042: RNCC: 3 | RNVC: 2

4 Apr 1985

3040-01-204-9710
Multiple Gears Gearshaft

012049710
46-0358-1: RNCC: 3 | RNVC: 2

2 Apr 1985

3040-01-204-9680
Control Cam

012049680
46-0346-1: RNCC: 3 | RNVC: 2
46-0346-1: RNCC: 5 | RNVC: 2

2 Apr 1985

3040-01-204-8535
Link

012048535
261589: RNCC: 3 | RNVC: 2
261589: RNCC: 5 | RNVC: 2

30 Mar 1985

3040-01-204-5724
Cam Lock

012045724
22969-1: RNCC: 3 | RNVC: 2

28 Mar 1985

3040-01-204-2695
Nonrotating Shaft Eye Bracket

012042695
12321219: RNCC: 3 | RNVC: 2

24 Mar 1985

3040-01-204-2696
Nonrotating Shaft Eye Bracket

012042696
12304758: RNCC: 3 | RNVC: 2

24 Mar 1985

3040-01-204-1761
Shouldered Shaft

012041761
12524A1: RNCC: 3 | RNVC: 2

22 Mar 1985

3040-01-204-1596
Spur Gearshaft

012041596
46-0316-1: RNCC: 3 | RNVC: 2
46-0316-1: RNCC: 5 | RNVC: 2

22 Mar 1985

3040-01-204-1278
Rigid Connecting Link

012041278
23657-42081: RNCC: 3 | RNVC: 2

22 Mar 1985

3040-01-203-9926
Handle

012039926
141856: RNCC: 3 | RNVC: 2
141856: RNCC: 5 | RNVC: 9

22 Mar 1985

3040-01-203-9923
Governor Arm

012039923
150-1089: RNCC: 3 | RNVC: 2
150-1089: RNCC: 5 | RNVC: 9

22 Mar 1985

3040-01-203-8247
Rigid Connecting Link

012038247
3453-001: RNCC: 3 | RNVC: 2
3453-001: RNCC: 3 | RNVC: 9

20 Mar 1985

3040-01-203-7517
Spring-Stop Collar

012037517
1809-001: RNCC: 3 | RNVC: 2
1809-001: RNCC: 3 | RNVC: 9

19 Mar 1985

3040-01-203-7069
Spline Adapter Shaft

012037069
5007489: RNCC: 3 | RNVC: 2

17 Mar 1985

3040-01-203-6948
Straight Shaft

012036948
158069-1: RNCC: 3 | RNVC: 2

17 Mar 1985

3040-01-203-5460
Shouldered Shaft

012035460
C7360-1: RNCC: 3 | RNVC: 2
7360-1: RNCC: 5 | RNVC: 9

15 Mar 1985

3040-01-203-4815
Support Ring

012034815
993 6939: RNCC: 3 | RNVC: 2
348 6974: RNCC: D | RNVC: 9

14 Mar 1985

3040-01-203-4800
Hub Clamp

012034800
A-101-17: RNCC: 3 | RNVC: 2
1735AS403-1: RNCC: C | RNVC: 1

14 Mar 1985

3040-01-203-4241
Manual Control Lever

012034241
1802-001: RNCC: 3 | RNVC: 9
1802-001: RNCC: C | RNVC: 1
229597: RNCC: C | RNVC: 1

14 Mar 1985

3040-01-203-4138
Link Roller Support

012034138
28N2003: RNCC: 3 | RNVC: 2
18N1277: RNCC: 5 | RNVC: 9

14 Mar 1985

3040-01-203-0507
Linear Actuating Cylinder Piston

012030507
344 5003: RNCC: 3 | RNVC: 2
348 6974: RNCC: D | RNVC: 9

9 Mar 1985

3040-01-203-0160
Shouldered Shaft

012030160
5N9359: RNCC: 3 | RNVC: 2
5N9357 ITEM 12: RNCC: 5 | RNVC: 2
17807-0001: RNCC: C | RNVC: 1

9 Mar 1985

3040-01-202-9780
Nonrotating Shaft Eye Bracket

012029780
18A4457: RNCC: 3 | RNVC: 2
18A4457-B: RNCC: D | RNVC: 9

8 Mar 1985

3040-01-202-7800
Linear Actuating Cylinder Assembly

012027800
9375575: RNCC: 3 | RNVC: 2
1949-500-230: RNCC: 5 | RNVC: 2

6 Mar 1985

3040-01-202-5562
Manual Control Lever

012025562
1880593-4: RNCC: 3 | RNVC: 2
1880593-1: RNCC: 5 | RNVC: 9

4 Mar 1985

3040-01-202-2075
Shouldered Shaft

012022075
897385-1: RNCC: 3 | RNVC: 2

27 Feb 1985

3040-01-202-2074
Shouldered Shaft

012022074
854612-9: RNCC: 3 | RNVC: 2
832555-7: RNCC: 5 | RNVC: 9

27 Feb 1985

3040-01-202-2076
Shouldered Shaft

012022076
854675-6: RNCC: 3 | RNVC: 2
875524-1: RNCC: 5 | RNVC: 9

27 Feb 1985

3040-01-202-2071
Shouldered Shaft

012022071
814399-2: RNCC: 3 | RNVC: 2

27 Feb 1985

3040-01-202-2072
Shouldered Shaft

012022072
814419-8: RNCC: 3 | RNVC: 2

27 Feb 1985

3040-01-202-2003
Sliding Shoe

012022003
814603-7: RNCC: 3 | RNVC: 2

27 Feb 1985

3040-01-201-8890
Shouldered Shaft

012018890
111865-02: RNCC: 3 | RNVC: 2
111865-02: RNCC: 5 | RNVC: 9
111865-00: RNCC: D | RNVC: 9

23 Feb 1985

3040-01-201-7372
Control Cam

012017372
6L8790: RNCC: 3 | RNVC: 2
5N9357 ITEM 7: RNCC: 5 | RNVC: 2
IPD6L8790: RNCC: 5 | RNVC: 9

22 Feb 1985

3040-01-201-7306
Push-Pull Control Assembly

012017306
000-35478-0064: RNCC: 3 | RNVC: 2
44232-013: RNCC: 5 | RNVC: 2
000-35478-0064: RNCC: 5 | RNVC: 2
35607-1: RNCC: 5 | RNVC: 9
000-35607-0001: RNCC: 5 | RNVC: 9
35607-1: RNCC: 5 | RNVC: 9

22 Feb 1985

3040-01-201-2879
Shaft Retaining Plate

012012879
1542093-8: RNCC: 3 | RNVC: 2

14 Feb 1985

3040-01-157-7937
Linear Actuating Cylinder Assembly

011577937
75351: RNCC: 3 | RNVC: 9

12 Jul 1983

3040-01-201-2428
Spur Gearshaft

012012428
2W9723: RNCC: 3 | RNVC: 2

14 Feb 1985

3040-01-201-2162
Mechanical Drive Housing

012012162
105-10002-1: RNCC: 3 | RNVC: 9
105-10002-1: RNCC: C | RNVC: 1

14 Feb 1985

3040-01-201-2119
Rigid Connecting Link

012012119
14039778: RNCC: 3 | RNVC: 2
14039778: RNCC: 5 | RNVC: 9

14 Feb 1985

3040-01-201-2104
Extension Shaft

012012104
384-1112-01: RNCC: 3 | RNVC: 2

14 Feb 1985

3040-01-157-6945
Shaft Collar

011576945
029566-00: RNCC: 3 | RNVC: 2
029566-00: RNCC: 3 | RNVC: 9
17841P: RNCC: 5 | RNVC: 9
RW-132847 PIECE 19: RNCC: 5 | RNVC: 9
17841P-00: RNCC: C | RNVC: 1
RW-132847: RNCC: D | RNVC: 9

11 Jul 1983

3040-01-200-9051
Linear Actuating Cylinder

012009051
A4-B-N1 5B-3.000-63B2-11: RNCC: 3 | RNVC: 2
11558181: RNCC: 5 | RNVC: 1
A3J: RNCC: 7 | RNVC: 9

10 Feb 1985

3040-01-200-7856
Extension Shaft

012007856
384-1178-00: RNCC: 3 | RNVC: 2

9 Feb 1985

3040-01-200-6190
Mechanical Drive Housing

012006190
12321741: RNCC: 3 | RNVC: 2

7 Feb 1985

3040-01-200-2559
Rigid Connecting Link

012002559
3398000879: RNCC: 3 | RNVC: 2
6V6208: RNCC: 5 | RNVC: 2

31 Jan 1985

3040-01-155-3627
Linear Actuating Cylinder Piston

011553627
7G3709: RNCC: 3 | RNVC: 2
2520011553627: RNCC: 5 | RNVC: 9
2520011553627: RNCC: 6 | RNVC: 9

8 Jun 1983

3040-01-155-3204
Rigid Connecting Link

011553204
65C18552-502: RNCC: 3 | RNVC: 2
65C18552-602: RNCC: 5 | RNVC: 9

7 Jun 1983

3040-01-199-8075
Control Cam

011998075
033-71287: RNCC: 3 | RNVC: 2

25 Jan 1985

3040-01-199-7941
Straight Shaft

011997941
14-02-042-001: RNCC: 3 | RNVC: 2
940100191: RNCC: 3 | RNVC: 2
2CD939: RNCC: 5 | RNVC: 2
9-490-100191: RNCC: 5 | RNVC: 2
9-490-100191: RNCC: 5 | RNVC: 2
14-02-659-012-8: RNCC: 5 | RNVC: 2
9-490-100191: RNCC: 5 | RNVC: 2
9-490-100191: RNCC: 5 | RNVC: 9
2CD939: RNCC: 5 | RNVC: 9
14-02-659-012: RNCC: D | RNVC: 9

25 Jan 1985

3040-01-199-7940
Straight Shaft

011997940
14-02-042-002: RNCC: 3 | RNVC: 2
9490100188: RNCC: 3 | RNVC: 2
9-490-100188: RNCC: 5 | RNVC: 2
2CD940: RNCC: 5 | RNVC: 2
14-02-659-013-7: RNCC: 5 | RNVC: 2
9-490-100188: RNCC: 5 | RNVC: 2
9-490-100188: RNCC: 5 | RNVC: 2
2CD940: RNCC: 5 | RNVC: 9
14-02-659-013: RNCC: D | RNVC: 9

25 Jan 1985

3040-01-199-7421
Flexible Core End Fitting

011997421
343360C1: RNCC: 3 | RNVC: 2

25 Jan 1985

3040-01-199-6749
Ball Joint

011996749
SPF6S: RNCC: 3 | RNVC: 2
R47940: RNCC: 5 | RNVC: 2
AT169087: RNCC: 5 | RNVC: 2
AT40382: RNCC: 5 | RNVC: 9
AT169: RNCC: 5 | RNVC: 9
AT40382: RNCC: 5 | RNVC: 9

24 Jan 1985

3040-01-199-6606
Idler Camshaft Shaft

011996606
3033853: RNCC: 3 | RNVC: 2

24 Jan 1985

3040-01-199-5674
Mechanical Drive Housing

011995674
SS800-K300: RNCC: 3 | RNVC: 9
SS800-K300: RNCC: C | RNVC: 1

23 Jan 1985

3040-01-199-5536
Mechanical Drive Housing

011995536
12321746: RNCC: 3 | RNVC: 2
12321746: RNCC: 5 | RNVC: 2

23 Jan 1985

3040-01-199-5506
Flexible Drive Shaft

011995506
12337787: RNCC: 1 | RNVC: 2
17220-X: RNCC: 3 | RNVC: 2
17220-X: RNCC: 5 | RNVC: 9

23 Jan 1985

3040-01-154-2965
Rigid Connecting Link

011542965
K652168-101: RNCC: 3 | RNVC: 2

23 May 1983

3040-01-154-2127
Mechanical Drive Housing

011542127
7G5325: RNCC: 3 | RNVC: 9

21 May 1983

3040-01-199-3033
Rigid Connecting Link

011993033
8359417: RNCC: 3 | RNVC: 2
8359417: RNCC: 3 | RNVC: 9

19 Jan 1985

3040-01-199-3032
Shaft Retaining Plate

011993032
0395820: RNCC: 3 | RNVC: 2
0395820: RNCC: 3 | RNVC: 9
395820: RNCC: 5 | RNVC: 2
385835: RNCC: 5 | RNVC: 9
395820: RNCC: 5 | RNVC: 9
385835: RNCC: 5 | RNVC: 9
395820: RNCC: 5 | RNVC: 9
0395820: RNCC: 5 | RNVC: 9
385835: RNCC: 5 | RNVC: 9
395820: RNCC: 5 | RNVC: 9

19 Jan 1985

3040-01-199-2399
Shouldered Shaft

011992399
12321850: RNCC: 3 | RNVC: 2

18 Jan 1985

3040-01-199-1485
Straight Shaft

011991485
6259153: RNCC: 3 | RNVC: 2
6259153: RNCC: 5 | RNVC: 9
11414: RNCC: 5 | RNVC: 9

17 Jan 1985

3040-01-198-9601
Mechanical Drive Housing

011989601
9N4078: RNCC: 3 | RNVC: 2

16 Jan 1985

3040-01-198-9554
Hub Clamp

011989554
AT27164: RNCC: 3 | RNVC: 2
AT27164: RNCC: 5 | RNVC: 9

16 Jan 1985

3040-01-198-8727
Mechanical Drive Housing

011988727
40112-1: RNCC: 3 | RNVC: 9
40112-1: RNCC: C | RNVC: 1

15 Jan 1985

3040-01-198-8518
Pawl

011988518
12336422-2: RNCC: 3 | RNVC: 2

15 Jan 1985

3040-01-198-8515
Pawl

011988515
12336099: RNCC: 3 | RNVC: 2

15 Jan 1985

3040-01-198-8517
Pawl

011988517
12336422-1: RNCC: 3 | RNVC: 2

15 Jan 1985

3040-01-198-8516
Pawl

011988516
12336108: RNCC: 3 | RNVC: 2

15 Jan 1985

3040-01-198-6491
Shouldered Shaft

011986491
183312: RNCC: 3 | RNVC: 2
39804 PIECE 72: RNCC: 5 | RNVC: 2
39804: RNCC: D | RNVC: 9

11 Jan 1985

3040-01-198-6327
Mechanical Drive Housing

011986327
G110575-1: RNCC: 3 | RNVC: 2
G110575-1: RNCC: 5 | RNVC: 2
G110575-1: RNCC: 5 | RNVC: 9

11 Jan 1985

3040-01-152-9846
Rigid Connecting Link

011529846
K653060-221: RNCC: 3 | RNVC: 2

11 May 1983

3040-01-198-5758
Linear Actuating Cylinder Assembly

011985758
TYPE A 1-1/2X3IN.STROKE: RNCC: 3 | RNVC: 2
A: RNCC: 5 | RNVC: 1
HHC0100: RNCC: 5 | RNVC: 9
TYPE A 1-1/2X3IN.STROKE: RNCC: 5 | RNVC: 9
TYPE A 1-1/2X3IN.STROKE: RNCC: 5 | RNVC: 9
HHC0100: RNCC: 5 | RNVC: 9

10 Jan 1985

3040-01-198-5732
Mechanical Drive Housing

011985732
134023: RNCC: 3 | RNVC: 2

10 Jan 1985

3040-01-198-3746
Control Cam

011983746
3035-304: RNCC: 3 | RNVC: 2

7 Jan 1985

3040-01-198-2870
Shouldered Shaft

011982870
033-71603: RNCC: 3 | RNVC: 2

6 Jan 1985

3040-01-198-2685
Counterbalance Weight

011982685
844212-1: RNCC: 3 | RNVC: 2
1-467-010-054: RNCC: 5 | RNVC: 2

6 Jan 1985

3040-01-198-1130
Straight Shaft

011981130
2238081: RNCC: 3 | RNVC: 2

4 Jan 1985

3040-01-198-0954
Nonrotating Shaft Eye Bracket

011980954
R53214: RNCC: 3 | RNVC: 2
R53214: RNCC: 5 | RNVC: 9

4 Jan 1985

3040-01-198-0860
Shouldered Shaft

011980860
1V6349: RNCC: 3 | RNVC: 2

4 Jan 1985

3040-01-198-0833
Straight Shaft

011980833
43159: RNCC: 3 | RNVC: 2
135DA-6 PIECE 51: RNCC: 5 | RNVC: 2
135DA-6: RNCC: D | RNVC: 9

4 Jan 1985

3040-01-198-0832
Straight Shaft

011980832
43160: RNCC: 3 | RNVC: 2
135DA-6 PIECE 52: RNCC: 5 | RNVC: 2
135DA-6: RNCC: D | RNVC: 9

4 Jan 1985

3040-01-197-8912
Shouldered Shaft

011978912
183222: RNCC: 3 | RNVC: 2
39804 PIECE 63: RNCC: 5 | RNVC: 2
312334 PIECE 63: RNCC: C | RNVC: 1
39804: RNCC: D | RNVC: 9

29 Dec 1984

3040-01-197-7948
Friction Disk

011977948
25400080: RNCC: 3 | RNVC: 2
01-0111 ITEM 24: RNCC: 5 | RNVC: 2

29 Dec 1984

3040-01-197-7217
Mechanical Drive Housing

011977217
312140: RNCC: 3 | RNVC: 2

26 Dec 1984

3040-01-197-1745
Rigid Connecting Link

011971745
70400-08110-060: RNCC: 3 | RNVC: 2
70400-08110-060: RNCC: 5 | RNVC: 2
3040PL1949284: RNCC: 6 | RNVC: 9

19 Dec 1984

3040-01-197-0205
Remote Control Lever

011970205
2227052-5: RNCC: 3 | RNVC: 2

17 Dec 1984

3040-01-196-7640
Linear Actuating Cylinder

011967640
27096: RNCC: 3 | RNVC: 2
125-27025 ITEM 5: RNCC: 5 | RNVC: 2
125-27025: RNCC: D | RNVC: 9

14 Dec 1984

3040-01-196-5420
Bevel Gearshaft

011965420
9448X: RNCC: 3 | RNVC: 2

12 Dec 1984

3040-01-196-4946
Linear Actuating Cylinder Assembly

011964946
6-372-002259: RNCC: 3 | RNVC: 2
2CF483: RNCC: 5 | RNVC: 9
2CF483: RNCC: C | RNVC: 1

12 Dec 1984

3040-01-196-4947
Linear Actuating Cylinder Assembly

011964947
6-372-002260: RNCC: 3 | RNVC: 2
6-294-005443: RNCC: 5 | RNVC: 2
2CF484: RNCC: 5 | RNVC: 9
2CF484: RNCC: C | RNVC: 1

12 Dec 1984

3040-01-196-3925
Straight Shaft

011963925
8D4689: RNCC: 3 | RNVC: 2

11 Dec 1984

3040-01-196-3927
Shouldered Shaft

011963927
160002-001: RNCC: 3 | RNVC: 2

11 Dec 1984

3040-01-196-3850
Mechanical Drive Housing

011963850
RW2/820018-1: RNCC: 3 | RNVC: 9
RW2/820020 PC 1: RNCC: 5 | RNVC: 9
RW2/820020 PC 1: RNCC: C | RNVC: 1
RW2/820018-1: RNCC: C | RNVC: 1

11 Dec 1984

3040-01-196-1685
Push-Pull Control Assembly

011961685
P-752476-091: RNCC: 3 | RNVC: 2
P-752476-091: RNCC: 3 | RNVC: 9
READINESS SPARE PART ITEM: RNCC: 5 | RNVC: 1

7 Dec 1984

3040-01-148-9523
Shaft

011489523
SK2400: RNCC: 3 | RNVC: 9
75576: RNCC: 5 | RNVC: 9

13 Mar 1983

3040-01-196-0856
Engine Drive Shaft

011960856
23210551: RNCC: 3 | RNVC: 2
23210551: RNCC: 3 | RNVC: 9

7 Dec 1984

3040-01-196-0585
Linear Actuating Cylinder Piston

011960585
G104107: RNCC: 3 | RNVC: 2

7 Dec 1984

3040-01-196-0583
Linear Actuating Cylinder Piston

011960583
G106504: RNCC: 3 | RNVC: 2

7 Dec 1984

3040-01-196-0553
Piston Rod Guide

011960553
172728: RNCC: 3 | RNVC: 2

7 Dec 1984

3040-01-195-9091
Manual Control Lever

011959091
172754: RNCC: 3 | RNVC: 2

4 Dec 1984

3040-01-195-6858
Control Cam

011956858
529250: RNCC: 3 | RNVC: 9

1 Dec 1984

3040-01-195-6859
Mot Operating Shaft

011956859
24317 PIECE 12: RNCC: 3 | RNVC: 2
106.256-6: RNCC: 5 | RNVC: 2

1 Dec 1984

3040-01-195-4440
Bevel Gearshaft

011954440
710837: RNCC: 3 | RNVC: 2
E-3400-15: RNCC: 5 | RNVC: 2
E-3400: RNCC: D | RNVC: 9

29 Nov 1984

3040-01-195-4050
Cam Roller Shoe

011954050
20121: RNCC: 3 | RNVC: 2
R66832: RNCC: 5 | RNVC: 2

28 Nov 1984

3040-01-195-4046
Control Cam

011954046
21687: RNCC: 3 | RNVC: 2
R58629: RNCC: 5 | RNVC: 2

28 Nov 1984

3040-01-147-3369
Shouldered Shaft

011473369
11683945: RNCC: 3 | RNVC: 2
3040011473369: RNCC: 5 | RNVC: 9
3040011473369: RNCC: 6 | RNVC: 9

15 Feb 1983

3040-01-195-0499
Spur Gearshaft

011950499
AR85788: RNCC: 3 | RNVC: 2
AR85788: RNCC: 5 | RNVC: 9

21 Nov 1984

3040-01-146-7058
Straight Shaft

011467058
310772: RNCC: 3 | RNVC: 9

4 Feb 1983

3040-01-194-6992
Remote Control Lever

011946992
15743: RNCC: 3 | RNVC: 2
14069597: RNCC: 5 | RNVC: 2
14069597: RNCC: 5 | RNVC: 9

16 Nov 1984

3040-01-194-6946
Bevel Gearshaft

011946946
210413: RNCC: 3 | RNVC: 2
910920: RNCC: 5 | RNVC: 2
E-3400-27A: RNCC: 5 | RNVC: 2
E-3400: RNCC: D | RNVC: 9

16 Nov 1984

3040-01-146-3480
Straight Shaft

011463480
737125: RNCC: 3 | RNVC: 9
NA-6954 PART 2: RNCC: 5 | RNVC: 9
737125: RNCC: 5 | RNVC: 9
H-8337 PIECE 79: RNCC: 5 | RNVC: 9
737125: RNCC: C | RNVC: 1
737125: RNCC: C | RNVC: 1
NA-6954 PART 2: RNCC: C | RNVC: 1
H-8337 PIECE 79: RNCC: C | RNVC: 1

29 Jan 1983

3040-01-194-4309
Shouldered Shaft

011944309
3860364-3: RNCC: 3 | RNVC: 2

14 Nov 1984

3040-01-146-1321
Manual Control Lever

011461321
SM-C-374895: RNCC: 3 | RNVC: 2
SM-C-374895: RNCC: 5 | RNVC: 9
5820011461321: RNCC: 5 | RNVC: 9
5820011461321: RNCC: 6 | RNVC: 9

25 Jan 1983

3040-01-194-2117
Control Cam

011942117
21610125-1: RNCC: 3 | RNVC: 2
21610125-1: RNCC: 3 | RNVC: 9
21610125: RNCC: 5 | RNVC: 9
21610125: RNCC: C | RNVC: 1

10 Nov 1984

3040-01-194-2116
Control Cam

011942116
21610126-1: RNCC: 3 | RNVC: 2
21610126-1: RNCC: 3 | RNVC: 9
21610126: RNCC: 5 | RNVC: 9

10 Nov 1984

3040-01-194-2119
Control Cam

011942119
21610123-1: RNCC: 3 | RNVC: 2
21610123-1: RNCC: 3 | RNVC: 9
21610123: RNCC: 5 | RNVC: 9

10 Nov 1984

3040-01-194-2118
Control Cam

011942118
21610124-1: RNCC: 3 | RNVC: 2
21610124-1: RNCC: 3 | RNVC: 9
21610124: RNCC: 5 | RNVC: 9

10 Nov 1984

3040-01-194-1696
Control Cam

011941696
AR61351: RNCC: 3 | RNVC: 2
AR61351: RNCC: 5 | RNVC: 9

10 Nov 1984

3040-01-194-1697
Control Cam

011941697
AR61352: RNCC: 3 | RNVC: 2
AR61352: RNCC: 5 | RNVC: 9

10 Nov 1984

3040-01-194-0266
Control Cam

011940266
21610219-1: RNCC: 3 | RNVC: 2
21610219-1: RNCC: 3 | RNVC: 9
21610219: RNCC: 5 | RNVC: 9

9 Nov 1984

3040-01-194-0265
Control Cam

011940265
21610220-1: RNCC: 3 | RNVC: 2
21610220-1: RNCC: 3 | RNVC: 9
21610220: RNCC: 5 | RNVC: 9

9 Nov 1984

3040-01-194-0200
Remote Control Lever

011940200
AT32956: RNCC: 3 | RNVC: 2
AT32956: RNCC: 5 | RNVC: 9

9 Nov 1984

3040-01-194-0179
Straight Shaft

011940179
5128862: RNCC: 3 | RNVC: 2

9 Nov 1984

3040-01-194-0068
Straight Shaft

011940068
21912414: RNCC: 3 | RNVC: 2
21912414: RNCC: 3 | RNVC: 9

9 Nov 1984

3040-01-194-0067
Straight Shaft

011940067
23613115: RNCC: 3 | RNVC: 9
23613115: RNCC: C | RNVC: 1
2261221-1: RNCC: C | RNVC: 1

9 Nov 1984

3040-01-144-8009
Nonrotating Shaft Eye Bracket

011448009
9347139: RNCC: 3 | RNVC: 2
8432798: RNCC: 5 | RNVC: 9

30 Dec 1982

3040-01-193-3523
Control Cam

011933523
21610218-1: RNCC: 3 | RNVC: 2
21610218-1: RNCC: 3 | RNVC: 9
21610218: RNCC: 5 | RNVC: 9

1 Nov 1984

3040-01-193-3330
Shouldered Shaft

011933330
6X1916X22: RNCC: 3 | RNVC: 2

1 Nov 1984

3040-01-193-3158
Starter Shaft

011933158
859204-0: RNCC: 3 | RNVC: 2
73324: RNCC: 5 | RNVC: 2
829024-9: RNCC: 5 | RNVC: 9

1 Nov 1984

3040-01-193-2792
Manual Control Lever

011932792
NW22767: RNCC: 3 | RNVC: 2
22767: RNCC: 5 | RNVC: 9

31 Oct 1984

3040-01-193-2767
Control Cam

011932767
21610221-1: RNCC: 3 | RNVC: 2
21610221-1: RNCC: 3 | RNVC: 9
21610221: RNCC: 5 | RNVC: 2
21610221: RNCC: 5 | RNVC: 9

31 Oct 1984

3040-01-144-2410
Shouldered Shaft

011442410
343411: RNCC: 3 | RNVC: 2

16 Dec 1982

3040-01-193-1742
Linear Actuating Cylinder Assembly

011931742
6-372-002363: RNCC: 3 | RNVC: 2
2CF464: RNCC: 5 | RNVC: 9
2CF464: RNCC: C | RNVC: 1

31 Oct 1984

3040-01-144-1081
Shouldered Shaft

011441081
343390: RNCC: 3 | RNVC: 2

14 Dec 1982

3040-01-143-9450
Manual Control Lever

011439450
42897: RNCC: 3 | RNVC: 9

10 Dec 1982

3040-01-192-9797
Shaft Retaining Plate

011929797
400324: RNCC: 3 | RNVC: 2

28 Oct 1984

3040-01-192-9682
Shouldered Shaft

011929682
F209K02260: RNCC: 3 | RNVC: 9
4909772-8: RNCC: 5 | RNVC: 2

28 Oct 1984

3040-01-192-9675
Body Hub

011929675
35588532: RNCC: 3 | RNVC: 2

28 Oct 1984

3040-01-192-8193
Shouldered Shaft

011928193
127505-001: RNCC: 3 | RNVC: 2
127505: RNCC: D | RNVC: 9

26 Oct 1984

3040-01-192-6368
Hydraulic Accumulator

011926368
13214E2420: RNCC: 3 | RNVC: 2
ACP08AA031E76K: RNCC: 5 | RNVC: 2
857220: RNCC: 5 | RNVC: 9
A65560-200: RNCC: 5 | RNVC: 9
13214E2420: RNCC: D | RNVC: 9

24 Oct 1984

3040-01-192-6256
Push-Pull Control Assembly

011926256
328346-15X: RNCC: 3 | RNVC: 2

23 Oct 1984

3040-01-192-6084
Ball Joint

011926084
123 6301: RNCC: 3 | RNVC: 2

23 Oct 1984

3040-01-192-6083
Push-Pull Control Assembly

011926083
35565977: RNCC: 3 | RNVC: 2
R25640P3: RNCC: 5 | RNVC: 9

23 Oct 1984

3040-01-192-6035
Manual Control Lever

011926035
L59087: RNCC: 3 | RNVC: 2

23 Oct 1984

3040-01-192-5936
Jack Crank Shaft

011925936
35361435: RNCC: 3 | RNVC: 9

23 Oct 1984

3040-01-192-5900
Straight Shaft

011925900
RE548059: RNCC: 3 | RNVC: 2
RE519736: RNCC: 5 | RNVC: 9
R54987: RNCC: 5 | RNVC: 9
DD12120: RNCC: 5 | RNVC: 9
R54987: RNCC: 5 | RNVC: 9

23 Oct 1984

3040-01-143-2766
Latch Parts Kit

011432766
SK 2486: RNCC: 3 | RNVC: 9

30 Nov 1982

3040-01-192-5724
Linear Actuating Cylinder Piston Rod

011925724
340572: RNCC: 3 | RNVC: 2
1173616C1: RNCC: 5 | RNVC: 9
340572: RNCC: 5 | RNVC: 9

23 Oct 1984

3040-01-192-5640
Manual Control Lever

011925640
60-504-0010-2: RNCC: 3 | RNVC: 2
60-504-0010-2: RNCC: C | RNVC: 1

23 Oct 1984

3040-01-192-4871
Fan Shaft

011924871
502723: RNCC: 3 | RNVC: 2

21 Oct 1984

3040-01-192-4267
Rigid Connecting Link

011924267
18020: RNCC: 3 | RNVC: 2
18020: RNCC: 5 | RNVC: 9

20 Oct 1984

3040-01-142-7672
Straight Shaft

011427672
B204189: RNCC: 3 | RNVC: 9
B204189: RNCC: 5 | RNVC: 9
B204189: RNCC: C | RNVC: 1
B204189: RNCC: C | RNVC: 1

20 Nov 1982

3040-01-192-1803
Push-Pull Control Assembly

011921803
6001-075-0152: RNCC: 3 | RNVC: 2
304262-003-0060.0: RNCC: 3 | RNVC: 9
304262-003-0060.0: RNCC: 5 | RNVC: 9
D037912-003-0060.0: RNCC: 5 | RNVC: 9
7-246-001046: RNCC: D | RNVC: 9

17 Oct 1984

3040-01-192-0514
Helical Gearshaft

011920514
30-700-40: RNCC: 3 | RNVC: 2

16 Oct 1984

3040-01-191-8371
Shouldered Shaft

011918371
81A: RNCC: 3 | RNVC: 2

12 Oct 1984

3040-01-141-9235
Control Cam

011419235
SM-C-414475: RNCC: 3 | RNVC: 2
5820011419235: RNCC: 5 | RNVC: 9
SM-C-414475: RNCC: 5 | RNVC: 9
5820011419235: RNCC: 6 | RNVC: 9

7 Nov 1982

3040-01-191-5141
Shouldered Shaft

011915141
239143: RNCC: 3 | RNVC: 9
239143: RNCC: 5 | RNVC: 9

9 Oct 1984

3040-01-191-4726
Linear Actuating Cylinder Piston

011914726
A-7006: RNCC: 3 | RNVC: 2
SHO-A-7006: RNCC: 5 | RNVC: 2

9 Oct 1984

3040-01-191-2808
Hub

011912808
2510-5064-304: RNCC: 3 | RNVC: 2
2510-5051-304: RNCC: 5 | RNVC: 9

7 Oct 1984

3040-01-190-5714
Shouldered Shaft

011905714
7566643-011: RNCC: 3 | RNVC: 2

28 Sep 1984

3040-01-139-3537
Rigid Connecting Link

011393537
76311: RNCC: 3 | RNVC: 9
78026: RNCC: 5 | RNVC: 9

29 Sep 1982

3040-01-190-2875
Shouldered Shaft

011902875
38527-026-1706H: RNCC: 3 | RNVC: 2
38527-026: RNCC: 5 | RNVC: 9

25 Sep 1984

3040-01-139-1843
Ball Joint

011391843
47744: RNCC: 3 | RNVC: 9

26 Sep 1982

3040-01-138-8905
Manual Control Lever

011388905
51690: RNCC: 3 | RNVC: 9

22 Sep 1982

3040-01-138-8877
Ball Joint

011388877
51531: RNCC: 3 | RNVC: 9
14506: RNCC: 5 | RNVC: 9

22 Sep 1982

3040-01-138-8424
Rigid Connecting Link

011388424
78695: RNCC: 3 | RNVC: 9

21 Sep 1982

3040-01-138-6734
Straight Shaft

011386734
76821: RNCC: 3 | RNVC: 9

18 Sep 1982

3040-01-138-5405
Straight Shaft

011385405
75616: RNCC: 3 | RNVC: 9

16 Sep 1982

3040-01-190-0450
Shouldered Shaft

011900450
239144: RNCC: 3 | RNVC: 2
239144: RNCC: 5 | RNVC: 2
239144: RNCC: 5 | RNVC: 9
239144: RNCC: 5 | RNVC: 9
239144: RNCC: 5 | RNVC: 9

23 Sep 1984

3040-01-189-9711
Rigid Connecting Link

011899711
70400-08151-050: RNCC: 3 | RNVC: 2

21 Sep 1984

3040-01-189-8960
Body Hub

011898960
241650: RNCC: 3 | RNVC: 2
241650: RNCC: 5 | RNVC: 2
241650: RNCC: 5 | RNVC: 9
241650: RNCC: 5 | RNVC: 9

20 Sep 1984

3040-01-189-8959
Push-Pull Control Assembly

011898959
D0304263-003-0048.0: RNCC: 3 | RNVC: 9
6003-075-0122: RNCC: 5 | RNVC: 2
7-246-001077: RNCC: 5 | RNVC: 2
D0304263-003-0048.0: RNCC: 5 | RNVC: 9
D037913-003-0048.0: RNCC: 5 | RNVC: 9

20 Sep 1984

3040-01-189-8647
Shouldered Shaft

011898647
239085: RNCC: 3 | RNVC: 2
239085: RNCC: 5 | RNVC: 2
239085: RNCC: 5 | RNVC: 9
239085: RNCC: 5 | RNVC: 9

20 Sep 1984

3040-01-189-8417
Linear Actuating Cylinder Assembly Parts Kit

011898417
9-752-100185: RNCC: 3 | RNVC: 2

20 Sep 1984

3040-01-189-8413
Straight Shaft

011898413
117667: RNCC: 3 | RNVC: 2
117667: RNCC: 5 | RNVC: 9

20 Sep 1984

3040-01-189-8404
Shaft Retaining Plate

011898404
215761: RNCC: 3 | RNVC: 2

20 Sep 1984

3040-01-138-0200
Rigid Connecting Link

011380200
52789: RNCC: 3 | RNVC: 9

5 Sep 1982

3040-01-189-4708
Helical Gearshaft

011894708
243946: RNCC: 3 | RNVC: 2

15 Sep 1984

3040-01-189-4667
Cylinder Actuating Linear Retainer Parts Kit

011894667
2G8594: RNCC: 3 | RNVC: 2
1715100: RNCC: 3 | RNVC: 2

15 Sep 1984

3040-01-189-4668
Breather

011894668
57-XL-15: RNCC: 3 | RNVC: 2
14U106-D3: RNCC: 5 | RNVC: 2
JCM-11052-001: RNCC: C | RNVC: 1
14U106-D0: RNCC: D | RNVC: 9

15 Sep 1984

3040-01-189-3374
Linear Actuating Cylinder

011893374
8628440-3: RNCC: 3 | RNVC: 2
8628440: RNCC: D | RNVC: 9

14 Sep 1984

3040-01-189-2923
Manual Control Lever

011892923
382-812-060-401-026: RNCC: 3 | RNVC: 2

14 Sep 1984

3040-01-189-2191
Remote Control Lever

011892191
22721: RNCC: 3 | RNVC: 2
5740655: RNCC: 5 | RNVC: 2

13 Sep 1984

3040-01-189-2171
Mechanical Drive Housing

011892171
239094: RNCC: 3 | RNVC: 2
239094: RNCC: 5 | RNVC: 2
239094: RNCC: 5 | RNVC: 9
239094: RNCC: 5 | RNVC: 9

13 Sep 1984

3040-01-189-0631
Nonrotating Shaft Eye Bracket

011890631
12322861: RNCC: 3 | RNVC: 2

11 Sep 1984

3040-01-136-8645
Brake Shaft

011368645
170680: RNCC: 3 | RNVC: 2

17 Aug 1982

3040-01-188-8204
Main Rot Shaft Assy

011888204
70351-08131-046: RNCC: 3 | RNVC: 2

8 Sep 1984

3040-01-188-7029
Shouldered Shaft

011887029
810AS2327: RNCC: 3 | RNVC: 2

7 Sep 1984

3040-01-188-5242
Collar

011885242
058687-1: RNCC: 3 | RNVC: 9

6 Sep 1984

3040-01-135-8354
Cord Assembly Brake

011358354
16610081-002: RNCC: 3 | RNVC: 2

30 Jul 1982

3040-01-188-3605
Straight Shaft

011883605
162B8574: RNCC: 3 | RNVC: 2

2 Sep 1984

3040-01-188-3604
Hub Clamp

011883604
1288319: RNCC: 3 | RNVC: 2

2 Sep 1984

3040-01-188-3472
Shaft Collar

011883472
1975350: RNCC: 3 | RNVC: 2
1975350: RNCC: 5 | RNVC: 2
1975350: RNCC: 5 | RNVC: 9
343029: RNCC: C | RNVC: 1

2 Sep 1984

3040-01-188-3457
Bell Crank Support

011883457
458-58511-1: RNCC: 3 | RNVC: 2

2 Sep 1984

3040-01-188-3205
Shouldered Shaft

011883205
9S8840: RNCC: 3 | RNVC: 2

1 Sep 1984

3040-01-188-1263
Linear Actuating Cylinder Assembly Parts Kit

011881263
91-21: RNCC: 3 | RNVC: 2
1045Z1240: RNCC: C | RNVC: 1

31 Aug 1984

3040-01-187-9744
Breather

011879744
9291620: RNCC: 1 | RNVC: 2
F68300: RNCC: 3 | RNVC: 2

29 Aug 1984

3040-01-187-3620
Remote Control Lever

011873620
7529324-1: RNCC: 3 | RNVC: 2

21 Aug 1984

3040-01-186-8175
Nonrotating Shaft Eye Bracket

011868175
6G0738: RNCC: 3 | RNVC: 2
6G738: RNCC: 5 | RNVC: 9

15 Aug 1984

3040-01-186-8131
Shouldered Shaft

011868131
6G0395: RNCC: 3 | RNVC: 2
6G395: RNCC: D | RNVC: 9

15 Aug 1984

3040-01-186-7887
Rigid Connecting Link

011867887
12308067: RNCC: 3 | RNVC: 2

15 Aug 1984

3040-01-132-4926
Manual Control Lever

011324926
01014500: RNCC: 3 | RNVC: 2
AB1303-107: RNCC: 3 | RNVC: 2
AB1303-107: RNCC: 5 | RNVC: 9
AB-1303: RNCC: D | RNVC: 9

30 May 1982

3040-01-186-6257
Shaft Collar

011866257
S1210-14: RNCC: 3 | RNVC: 2

12 Aug 1984

3040-01-186-6024
Shouldered Shaft

011866024
04-3800-03: RNCC: 3 | RNVC: 2
61A: RNCC: 5 | RNVC: 9
M-4/00-61A: RNCC: 5 | RNVC: 9
04-3800-09: RNCC: 5 | RNVC: 9

11 Aug 1984

3040-01-132-1380
Shaft Collar

011321380
0026-2155: RNCC: 3 | RNVC: 2

24 May 1982

3040-01-186-3600
Linear Actuating Cylinder Assembly Parts Kit

011863600
24458-59812: RNCC: 3 | RNVC: 2
24458-59811: RNCC: 5 | RNVC: 9

10 Aug 1984

3040-01-186-3601
Linear Actuating Cylinder Assembly Parts Kit

011863601
38U34: RNCC: 3 | RNVC: 2
CS-1501-2018: RNCC: 5 | RNVC: 2

10 Aug 1984

3040-01-186-0843
Shaft Collar

011860843
5575776: RNCC: 3 | RNVC: 2

7 Aug 1984

3040-01-185-9568
Mechanical Drive Housing

011859568
3S0120: RNCC: 3 | RNVC: 2
3S120: RNCC: 5 | RNVC: 9

5 Aug 1984

3040-01-185-8011
Shouldered Shaft

011858011
18138: RNCC: 3 | RNVC: 2
18138: RNCC: 5 | RNVC: 9
14841: RNCC: 5 | RNVC: 9

4 Aug 1984

3040-01-185-6253
Manual Control Lever

011856253
0338657: RNCC: 3 | RNVC: 2
320426: RNCC: 5 | RNVC: 9
320426: RNCC: 5 | RNVC: 9
320426: RNCC: 5 | RNVC: 9
320426: RNCC: 5 | RNVC: 9
338657: RNCC: 5 | RNVC: 9
0338657: RNCC: 5 | RNVC: 9
0338657: RNCC: 5 | RNVC: 9
338657: RNCC: 5 | RNVC: 9
0338657: RNCC: 5 | RNVC: 9

1 Aug 1984

3040-01-185-4463
Rigid Connecting Link

011854463
8J7553: RNCC: 3 | RNVC: 2

29 Jul 1984

3040-01-185-4370
Shouldered Shaft

011854370
8J7832: RNCC: 3 | RNVC: 2

29 Jul 1984

3040-01-185-3930
Linear Actuating Cylinder Piston Rod

011853930
8J6419: RNCC: 3 | RNVC: 2

27 Jul 1984

3040-01-185-2422
Hydraulic Pump Drive Shaft Assembly

011852422
AT42312: RNCC: 3 | RNVC: 2

26 Jul 1984

3040-01-185-1277
Shaft Retaining Plate

011851277
6G5397: RNCC: 3 | RNVC: 2

25 Jul 1984

3040-01-129-6484
Ball Joint

011296484
88779A16: RNCC: 3 | RNVC: 9
H8222PC78: RNCC: 5 | RNVC: 9
88779A16: RNCC: 5 | RNVC: 9
H8222PC78: RNCC: 5 | RNVC: 9
88779A16: RNCC: C | RNVC: 1
H8222PC78: RNCC: C | RNVC: 1
H8222PC78: RNCC: C | RNVC: 1
88779A16: RNCC: C | RNVC: 1

8 Apr 1982

3040-01-184-9825
Controllable Swashplate

011849825
50481-1: RNCC: 3 | RNVC: 9

24 Jul 1984

3040-01-184-9482
Shouldered Shaft

011849482
7D5967: RNCC: 3 | RNVC: 2

24 Jul 1984

3040-01-184-9478
Straight Shaft

011849478
7J5817: RNCC: 3 | RNVC: 2

24 Jul 1984

3040-01-184-6234
Shouldered Shaft

011846234
LTCT26715-02: RNCC: 3 | RNVC: 2
LTCT26715-02: RNCC: 5 | RNVC: 2
LTCT26715-02: RNCC: 5 | RNVC: 2

20 Jul 1984

3040-01-184-5479
Straight Shaft

011845479
3P0368: RNCC: 3 | RNVC: 2

19 Jul 1984

3040-01-184-5383
Mechanical Drive Housing

011845383
3A5329: RNCC: 3 | RNVC: 2
118462: RNCC: 5 | RNVC: 2
118462: RNCC: 5 | RNVC: 9

19 Jul 1984

3040-01-184-4684
Shaft Retaining Plate

011844684
8P6949: RNCC: 3 | RNVC: 2
1P7509: RNCC: C | RNVC: 1

18 Jul 1984

3040-01-184-4681
Rigid Connecting Link

011844681
9D2517: RNCC: 3 | RNVC: 2

18 Jul 1984

3040-01-184-4676
Remote Control Lever

011844676
4M4943: RNCC: 3 | RNVC: 2

18 Jul 1984

3040-01-184-4675
Remote Control Lever

011844675
9S3784: RNCC: 3 | RNVC: 2

18 Jul 1984

3040-01-184-4633
Linear Actuating Cylinder Assembly

011844633
5J2449: RNCC: 3 | RNVC: 2

18 Jul 1984

3040-01-184-4566
Spur Gearshaft

011844566
6G0396: RNCC: 3 | RNVC: 2
6G396: RNCC: D | RNVC: 9

18 Jul 1984

3040-01-184-4320
Straight Shaft

011844320
8P6439: RNCC: 3 | RNVC: 2

18 Jul 1984

3040-01-184-4325
Shouldered Shaft

011844325
6G8459: RNCC: 3 | RNVC: 2

18 Jul 1984

3040-01-184-4322
Shouldered Shaft

011844322
57405-5: RNCC: 3 | RNVC: 2
5041-371: RNCC: 5 | RNVC: 2
3040PL0947535: RNCC: 6 | RNVC: 9
57405: RNCC: D | RNVC: 9

18 Jul 1984

3040-01-184-3196
Rotating Shaft Eye Bracket

011843196
8W1028: RNCC: 3 | RNVC: 2
90042: RNCC: 5 | RNVC: 9
5T1963: RNCC: 5 | RNVC: 9

17 Jul 1984

3040-01-184-2277
Rigid Connecting Link

011842277
9D8478: RNCC: 3 | RNVC: 2

17 Jul 1984

3040-01-184-2231
Linear Actuating Cylinder Piston

011842231
50485: RNCC: 3 | RNVC: 9
50485: RNCC: 5 | RNVC: 9

17 Jul 1984

3040-01-184-2122
Straight Shaft

011842122
5D6382: RNCC: 3 | RNVC: 2

17 Jul 1984

3040-01-184-1185
Rigid Connecting Link

011841185
5122798: RNCC: 3 | RNVC: 2

13 Jul 1984

3040-01-184-1184
Rigid Connecting Link

011841184
8J7760: RNCC: 3 | RNVC: 2

13 Jul 1984

3040-01-184-1179
Rotating Shaft Eye Bracket

011841179
4T4309: RNCC: 3 | RNVC: 2

13 Jul 1984

3040-01-184-1125
Mechanical Drive Housing

011841125
209843-A: RNCC: 3 | RNVC: 2
1T0669: RNCC: 3 | RNVC: 2
1T669: RNCC: 5 | RNVC: 9

13 Jul 1984

3040-01-184-0557
Remote Control Lever

011840557
3956916: RNCC: 3 | RNVC: 2
3956916: RNCC: 5 | RNVC: 9

13 Jul 1984

3040-01-184-0463
Lever Assembly

011840463
6G5054: RNCC: 3 | RNVC: 2

13 Jul 1984

3040-01-184-0469
Final Drive Ring

011840469
6G8371: RNCC: 3 | RNVC: 2

13 Jul 1984

3040-01-184-0462
Lever Assembly

011840462
9D-8479: RNCC: 3 | RNVC: 2
9D2579: RNCC: 5 | RNVC: 9

13 Jul 1984

3040-01-184-0468
Bearing Cage Assembly

011840468
6P7709: RNCC: 3 | RNVC: 2

13 Jul 1984

3040-01-184-0375
Mechanical Drive Housing

011840375
9G0599: RNCC: 3 | RNVC: 2

13 Jul 1984

3040-01-184-0244
Linear Actuating Cylinder Piston Rod

011840244
5J0771: RNCC: 3 | RNVC: 2
5J771: RNCC: 5 | RNVC: 2

12 Jul 1984

3040-01-183-8450
Shouldered Shaft

011838450
13211E9109: RNCC: 3 | RNVC: 2

11 Jul 1984

3040-01-183-7185
Straight Shaft

011837185
7J6885: RNCC: 3 | RNVC: 2
17225: RNCC: 5 | RNVC: 9

9 Jul 1984

3040-01-183-4616
Shouldered Shaft

011834616
237255: RNCC: 3 | RNVC: 9

6 Jul 1984

3040-01-183-4449
Quick Release Hub

011834449
12-13119-00: RNCC: 3 | RNVC: 2

6 Jul 1984

3040-01-183-2761
Rigid Connecting Link

011832761
3206136: RNCC: 3 | RNVC: 2
322771: RNCC: 5 | RNVC: 9
322771: RNCC: 5 | RNVC: 9

4 Jul 1984

3040-01-183-2216
Shouldered Shaft

011832216
1010Z1394: RNCC: 3 | RNVC: 2
32699: RNCC: 5 | RNVC: 9

4 Jul 1984

3040-01-183-0744
Shaft Retaining Plate

011830744
014508-1: RNCC: 3 | RNVC: 2
014508-1: RNCC: 3 | RNVC: 9

1 Jul 1984

3040-01-182-7881
Linear Actuating Cylinder Piston

011827881
5J0772: RNCC: 3 | RNVC: 2
5J772: RNCC: D | RNVC: 9

27 Jun 1984

3040-01-182-7352
Rotating Shaft Eye Bracket

011827352
90109: RNCC: 3 | RNVC: 2
8W1029: RNCC: 5 | RNVC: 2
5T1962: RNCC: 5 | RNVC: 9

27 Jun 1984

3040-01-182-6898
Cylinder Assembly

011826898
3G6904: RNCC: 3 | RNVC: 2

27 Jun 1984

3040-01-182-6894
Bracket And Pin Assembly

011826894
5J1449: RNCC: 3 | RNVC: 2

27 Jun 1984

3040-01-182-6893
Bracket Assembly

011826893
315-6903: RNCC: 3 | RNVC: 2
8J7520: RNCC: 5 | RNVC: 9

27 Jun 1984

3040-01-182-4479
Cylinder Assembly

011824479
5J2450: RNCC: 3 | RNVC: 2

23 Jun 1984

3040-01-182-4478
Cylinder Assembly

011824478
5J0777: RNCC: 3 | RNVC: 2
5J777: RNCC: 5 | RNVC: 2

23 Jun 1984

3040-01-182-4436
Shouldered Shaft

011824436
7J5362: RNCC: 3 | RNVC: 2

23 Jun 1984

3040-01-182-4395
Shouldered Shaft

011824395
1010Z1518: RNCC: 3 | RNVC: 2
9S0313: RNCC: 3 | RNVC: 2
9S313: RNCC: 5 | RNVC: 2

23 Jun 1984

3040-01-182-3929
Lockshaft Spindle

011823929
MPI76425601: RNCC: 3 | RNVC: 2

23 Jun 1984

3040-01-182-3493
Straight Shaft

011823493
7J6884: RNCC: 3 | RNVC: 2
14423: RNCC: 5 | RNVC: 2

22 Jun 1984

3040-01-182-2608
Shouldered Shaft

011822608
9J3741: RNCC: 3 | RNVC: 2
27728: RNCC: 5 | RNVC: 9

22 Jun 1984

3040-01-182-1747
Shouldered Shaft

011821747
23418: RNCC: 3 | RNVC: 2
7J9434: RNCC: 5 | RNVC: 2

20 Jun 1984

3040-01-182-0289
Shaft Stub Assembly

011820289
125C104: RNCC: 3 | RNVC: 2

19 Jun 1984

3040-01-182-0104
Rigid Connecting Link

011820104
4453-032: RNCC: 3 | RNVC: 2

19 Jun 1984

3040-01-181-9509
Straight Shaft

011819509
3010942: RNCC: 3 | RNVC: 2

18 Jun 1984

3040-01-181-6777
Body Hub

011816777
9P8452: RNCC: 3 | RNVC: 2

13 Jun 1984

3040-01-181-6726
Spur Gearshaft

011816726
21332: RNCC: 3 | RNVC: 2
3G6887: RNCC: 5 | RNVC: 9
4T3197: RNCC: D | RNVC: 9

13 Jun 1984

3040-01-181-6530
Mechanical Drive Housing

011816530
13215E6606: RNCC: 3 | RNVC: 2

13 Jun 1984

3040-01-181-6531
Mechanical Drive Housing

011816531
13215E6676: RNCC: 3 | RNVC: 2
13215E6676: RNCC: 3 | RNVC: 9
13215E6678 REV-H: RNCC: 5 | RNVC: 2

13 Jun 1984

3040-01-181-3619
Shouldered Shaft

011813619
1011504: RNCC: 3 | RNVC: 2
2G6571: RNCC: 5 | RNVC: 9

8 Jun 1984

3040-01-181-2053
Rigid Connecting Link

011812053
7D9369: RNCC: 3 | RNVC: 2

7 Jun 1984

3040-01-181-1819
Straight Shaft

011811819
83D0230 ITEM 25: RNCC: 3 | RNVC: 2
79D7 ITEM 25: RNCC: 5 | RNVC: 9

7 Jun 1984

3040-01-181-0963
Manual Control Lever

011810963
14017498: RNCC: 3 | RNVC: 2
366743: RNCC: 5 | RNVC: 2
366743: RNCC: 5 | RNVC: 9
14017498: RNCC: 5 | RNVC: 9

6 Jun 1984

3040-01-181-0304
Nonrotating Shaft Eye Bracket

011810304
6G1623: RNCC: 3 | RNVC: 2

6 Jun 1984

3040-01-180-9829
Balance Piston

011809829
CH5-1806: RNCC: 3 | RNVC: 2

6 Jun 1984

3040-01-180-8569
Rigid Connecting Link

011808569
4037929: RNCC: 3 | RNVC: 2
4036952: RNCC: 5 | RNVC: 9

4 Jun 1984

3040-01-180-8426
Shaft Assembly

011808426
666123: RNCC: 3 | RNVC: 9
666123: RNCC: C | RNVC: 1

4 Jun 1984

3040-01-123-8874
Squeegee Lift Shaft

011238874
33749: RNCC: 3 | RNVC: 9
76966: RNCC: 5 | RNVC: 9

18 Dec 1981

3040-01-180-7281
Straight Shaft

011807281
CA030486: RNCC: 3 | RNVC: 2
1G36906: RNCC: 5 | RNVC: 9

2 Jun 1984

3040-01-180-7257
Straight Shaft

011807257
4116589: RNCC: 3 | RNVC: 2
4116589: RNCC: 5 | RNVC: 2

2 Jun 1984

3040-01-180-7108
Rigid Connecting Link

011807108
70207-22217-113: RNCC: 3 | RNVC: 2

2 Jun 1984

3040-01-180-0777
Shaft Retaining Plate

011800777
7D8891: RNCC: 3 | RNVC: 2

24 May 1984

3040-01-179-9221
Bell Crank

011799221
12332097-2: RNCC: 3 | RNVC: 2
13211E9408: RNCC: 5 | RNVC: 9

22 May 1984

3040-01-179-9217
Bell Crank

011799217
13204E3688: RNCC: 3 | RNVC: 2

22 May 1984

3040-01-179-8818
Straight Shaft

011798818
1W6178: RNCC: 3 | RNVC: 2
IPD1W6178: RNCC: 5 | RNVC: 9

22 May 1984

3040-01-122-5202
Pawl

011225202
1149006-50-00/6: RNCC: 3 | RNVC: 2
11.490.650.00: RNCC: 5 | RNVC: 2

22 Nov 1981

3040-01-179-7455
Rigid Connecting Link

011797455
7-311527009: RNCC: 3 | RNVC: 2
7-311527009: RNCC: 3 | RNVC: 9

21 May 1984

3040-01-179-7452
Rigid Connecting Link

011797452
7-311112039-7: RNCC: 3 | RNVC: 2
7-311112039-7: RNCC: 5 | RNVC: 9

21 May 1984

3040-01-179-7326
Shouldered Shaft

011797326
13220E0541: RNCC: 3 | RNVC: 2

21 May 1984

3040-01-179-6180
Helical Gearshaft

011796180
P305134N: RNCC: 3 | RNVC: 9
305134: RNCC: 5 | RNVC: 9
P305134N: RNCC: C | RNVC: 1

19 May 1984

3040-01-179-5792
Remote Control Lever

011795792
2G4618: RNCC: 3 | RNVC: 2

19 May 1984

3040-01-179-5796
Rigid Connecting Link

011795796
1827872C1: RNCC: 3 | RNVC: 2
673761C1: RNCC: 5 | RNVC: 9

19 May 1984

3040-01-179-5669
Linear Actuating Cylinder Cap

011795669
9640105: RNCC: 3 | RNVC: 9
N7965: RNCC: 5 | RNVC: 2
75700451: RNCC: 5 | RNVC: 2

19 May 1984

3040-01-179-5489
Shouldered Shaft

011795489
2G2137: RNCC: 3 | RNVC: 2

19 May 1984

3040-01-179-4393
Mechanical Drive Housing

011794393
6N5324: RNCC: 3 | RNVC: 2

18 May 1984

3040-01-179-3583
Spur Gearshaft

011793583
12283653: RNCC: 3 | RNVC: 2

17 May 1984

3040-01-179-3101
Rigid Connecting Link

011793101
6G6432: RNCC: 3 | RNVC: 2

16 May 1984

3040-01-121-7513
Repair Kit

011217513
9-752-100242: RNCC: 3 | RNVC: 9
9-752-100242: RNCC: 5 | RNVC: 2

8 Nov 1981

3040-01-179-1411
Mechanical Drive Housing

011791411
13215E2358: RNCC: 3 | RNVC: 2

16 May 1984

3040-01-178-9827
Mechanical Drive Housing

011789827
1W1698: RNCC: 3 | RNVC: 2

12 May 1984

3040-01-178-9789
Flexible Shaft Assembly

011789789
7831570: RNCC: 3 | RNVC: 2
7831570: RNCC: 5 | RNVC: 2
7831570: RNCC: 5 | RNVC: 9
7831570: RNCC: 5 | RNVC: 9

12 May 1984

3040-01-178-9709
Straight Shaft

011789709
5T3476: RNCC: 3 | RNVC: 2

12 May 1984

3040-01-178-8909
Shaft Retaining Plate

011788909
6G2874: RNCC: 3 | RNVC: 2

11 May 1984

3040-01-178-7222
Linear Actuating Cylinder Piston

011787222
C285509X1: RNCC: 3 | RNVC: 2
10510640: RNCC: 3 | RNVC: 2

9 May 1984

3040-01-178-7131
Linear Actuating Cylinder Piston Rod

011787131
G33449: RNCC: 3 | RNVC: 2
B128187: RNCC: 5 | RNVC: 2

9 May 1984

3040-01-178-7132
Linear Actuating Cylinder Piston Rod

011787132
23654-52251: RNCC: 3 | RNVC: 2
23654-50201: RNCC: D | RNVC: 9

9 May 1984

3040-01-178-7029
Shouldered Shaft

011787029
261552: RNCC: 3 | RNVC: 2

9 May 1984

3040-01-178-6655
Mechanical Drive Housing

011786655
32997: RNCC: 3 | RNVC: 9
1014Z2061: RNCC: 5 | RNVC: 2
32997: RNCC: C | RNVC: 1
32997: RNCC: C | RNVC: 1

9 May 1984

3040-01-178-4899
Manual Control Lever

011784899
3410484: RNCC: 3 | RNVC: 2
3515390: RNCC: 5 | RNVC: 9

5 May 1984

3040-01-178-4861
Shaft Assembly

011784861
6T8703: RNCC: 3 | RNVC: 2

5 May 1984

3040-01-178-3413
Shouldered Shaft

011783413
757-3936-004: RNCC: 3 | RNVC: 2
757-3936: RNCC: D | RNVC: 9

4 May 1984

3040-01-178-3293
Bell Crank

011783293
70400-02501-047: RNCC: 3 | RNVC: 2

4 May 1984

3040-01-178-3147
Rigid Connecting Link

011783147
077453: RNCC: 3 | RNVC: 9

3 May 1984

3040-01-178-0730
Mechanical Drive Housing

011780730
2G1736: RNCC: 3 | RNVC: 2

1 May 1984

3040-01-178-0729
Mechanical Drive Housing

011780729
1T1085: RNCC: 3 | RNVC: 2

1 May 1984

3040-01-178-0698
Shouldered Shaft

011780698
2W7255: RNCC: 3 | RNVC: 2
1490791: RNCC: 5 | RNVC: 2

1 May 1984

3040-01-177-7656
Mechanical Drive Housing

011777656
2744256: RNCC: 3 | RNVC: 2
2744256: RNCC: 5 | RNVC: 9

27 Apr 1984

3040-01-177-7600
Rotating Shaft Eye Bracket

011777600
2768707: RNCC: 3 | RNVC: 2
2768707: RNCC: 5 | RNVC: 9

27 Apr 1984

3040-01-177-4874
Rigid Connecting Link

011774874
6G2819: RNCC: 3 | RNVC: 2

25 Apr 1984

3040-01-177-4819
Mechanical Drive Housing

011774819
2007929: RNCC: 3 | RNVC: 2
5T7125: RNCC: 5 | RNVC: 9

25 Apr 1984

3040-01-177-4742
Straight Shaft

011774742
02-25-07384-1126: RNCC: 3 | RNVC: 2
2AL363: RNCC: 3 | RNVC: 2
2AL363: RNCC: 5 | RNVC: 9
02-21-04642-1126: RNCC: D | RNVC: 9

25 Apr 1984

3040-01-177-4177
Shouldered Shaft

011774177
SM-D-969745-1: RNCC: 3 | RNVC: 1
363027-1: RNCC: 3 | RNVC: 2
SM-D-969745: RNCC: D | RNVC: 9

25 Apr 1984

3040-01-177-4050
Multiple Disk Brake

011774050
90-002-0533: RNCC: 3 | RNVC: 2

25 Apr 1984

3040-01-177-0143
Pinion Shaft

011770143
0N510285: RNCC: 3 | RNVC: 2

18 Apr 1984

3040-01-176-9445
Linear Actuating Cylinder Piston Rod

011769445
91167-991: RNCC: 3 | RNVC: 2
91167-991: RNCC: 3 | RNVC: 9
253 6222-603: RNCC: 5 | RNVC: 2
253 6222-603: RNCC: 5 | RNVC: 2
6353134: RNCC: 5 | RNVC: 2
6353134: RNCC: 5 | RNVC: 9
6353134: RNCC: 5 | RNVC: 9
2536222-603: RNCC: 5 | RNVC: 9
10422956: RNCC: 6 | RNVC: 9

18 Apr 1984

3040-01-176-6775
Mechanical Drive Housing

011766775
D49348-5: RNCC: 3 | RNVC: 9
D49348-5: RNCC: 5 | RNVC: 9

14 Apr 1984

3040-01-176-6776
Mechanical Drive Housing

011766776
D62746: RNCC: 3 | RNVC: 9
D49347: RNCC: 5 | RNVC: 9
D49347: RNCC: 5 | RNVC: 9

14 Apr 1984

3040-01-176-4757
Rotating Shaft Eye Bracket

011764757
2536555-801: RNCC: 3 | RNVC: 9
472-9974: RNCC: 6 | RNVC: 9

12 Apr 1984

3040-01-176-2979
Shaft Retaining Plate

011762979
408487-17: RNCC: 3 | RNVC: 9
8N0819: RNCC: 5 | RNVC: 2
8N819: RNCC: D | RNVC: 9

10 Apr 1984

3040-01-176-2939
Linear Actuating Cylinder Cap

011762939
8J6222: RNCC: 3 | RNVC: 2

10 Apr 1984

3040-01-176-2784
Mechanical Drive Housing

011762784
6758025: RNCC: 3 | RNVC: 9
6758025: RNCC: 5 | RNVC: 9

10 Apr 1984

3040-01-176-2391
Straight Shaft

011762391
0N242192: RNCC: 3 | RNVC: 2

10 Apr 1984

3040-01-176-2390
Shouldered Shaft

011762390
0N242187: RNCC: 3 | RNVC: 2

10 Apr 1984

3040-01-176-2384
Straight Shaft

011762384
0N242289: RNCC: 3 | RNVC: 2

10 Apr 1984

3040-01-176-2383
Shouldered Shaft

011762383
0N242188: RNCC: 3 | RNVC: 2

10 Apr 1984

3040-01-176-1260
Pawl

011761260
12324262: RNCC: 3 | RNVC: 2

7 Apr 1984

3040-01-176-1214
Manual Control Lever

011761214
6G7598: RNCC: 3 | RNVC: 2

7 Apr 1984

3040-01-176-1215
Linear Actuating Cylinder Cap

011761215
8J5911: RNCC: 3 | RNVC: 2

7 Apr 1984

3040-01-176-1120
Shouldered Shaft

011761120
A3198V126: RNCC: 3 | RNVC: 2
N8570: RNCC: 5 | RNVC: 2

7 Apr 1984

3040-01-176-0586
Rigid Connecting Link

011760586
3730954: RNCC: 3 | RNVC: 2

7 Apr 1984

3040-01-176-0523
Straight Shaft

011760523
5122296: RNCC: 3 | RNVC: 2
5122296: RNCC: 5 | RNVC: 1

7 Apr 1984

3040-01-176-0296
Shouldered Shaft

011760296
339489: RNCC: 3 | RNVC: 2
339489: RNCC: 5 | RNVC: 2

6 Apr 1984

3040-01-176-0021
Shouldered Shaft

011760021
3860089-1: RNCC: 3 | RNVC: 2

6 Apr 1984

3040-01-117-0572
Shouldered Shaft

011170572
75453: RNCC: 3 | RNVC: 9

8 Aug 1981

Load More Results