What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 152 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 152 of 300

3040-01-286-0109
Shaft Retaining Plate

012860109
2T1545: RNCC: 3 | RNVC: 2

24 Sep 1988

3040-01-286-0088
Push-Pull Control Assembly

012860088
4035-075-1158: RNCC: 3 | RNVC: 2
038012-03-456.0: RNCC: 5 | RNVC: 9
304242-3-456: RNCC: 5 | RNVC: 9
304242-3-456: RNCC: 5 | RNVC: 9

24 Sep 1988

3040-01-285-8427
Push-Pull Control Assembly

012858427
304242-003-420: RNCC: 3 | RNVC: 2
304242-3-420: RNCC: 3 | RNVC: 2
204242-3-420: RNCC: 5 | RNVC: 9
304242-003-420: RNCC: 5 | RNVC: 9
304242-3-420: RNCC: 5 | RNVC: 9
D38012-003-420: RNCC: C | RNVC: 1

22 Sep 1988

3040-01-285-4602
Remote Control Lever

012854602
7C6202: RNCC: 3 | RNVC: 2

14 Sep 1988

3040-01-285-3018
Rigid Connecting Link

012853018
70400-08110-061: RNCC: 3 | RNVC: 2
3040PL1949295: RNCC: 6 | RNVC: 9

10 Sep 1988

3040-01-285-2985
Remote Control Lever

012852985
491673C1: RNCC: 3 | RNVC: 2

10 Sep 1988

3040-01-285-0657
Manual Control Lever

012850657
75059: RNCC: 3 | RNVC: 9

6 Sep 1988

3040-01-284-8753
Differential Gear Unit

012848753
7V9638: RNCC: 3 | RNVC: 2

2 Sep 1988

3040-01-284-7565
Rigid Connecting Link

012847565
70305-02106-102: RNCC: 3 | RNVC: 2

31 Aug 1988

3040-01-284-6403
Shouldered Shaft

012846403
077164: RNCC: 3 | RNVC: 2
77164: RNCC: 5 | RNVC: 9

27 Aug 1988

3040-01-284-6023
Linear Actuating Cylinder Cap

012846023
10002735: RNCC: 3 | RNVC: 2

26 Aug 1988

3040-01-284-5990
Shouldered Shaft

012845990
842429: RNCC: 3 | RNVC: 2

26 Aug 1988

3040-01-284-5875
Speedometer-Tachometer Drive Adapter

012845875
3905217: RNCC: 3 | RNVC: 2

26 Aug 1988

3040-01-284-5405
Mechanical Drive Housing

012845405
219F616: RNCC: 3 | RNVC: 2

25 Aug 1988

3040-01-284-4552
Rigid Connecting Link

012844552
2T1546: RNCC: 3 | RNVC: 2

24 Aug 1988

3040-01-284-4151
Straight Shaft

012844151
1300-15-22: RNCC: 3 | RNVC: 2

24 Aug 1988

3040-01-284-2007
Worm Shaft

012842007
2125-3429-010: RNCC: 3 | RNVC: 2
2125-3429-010: RNCC: 5 | RNVC: 9
2125-3429-010: RNCC: C | RNVC: 1

19 Aug 1988

3040-01-283-9698
Brake Disc

012839698
8900-0458-001: RNCC: 3 | RNVC: 2
8900-0458: RNCC: D | RNVC: 9

16 Aug 1988

3040-01-283-8356
Piston Ring

012838356
003932000: RNCC: 3 | RNVC: 2
H-83923 NUMBER 48: RNCC: 5 | RNVC: 2
73718-0200: RNCC: 5 | RNVC: 9

13 Aug 1988

3040-01-283-7702
Hydraulic Accumulator

012837702
ACB-30C-12P-NT-3: RNCC: 3 | RNVC: 2
ACB-30C-12P-NT-3: RNCC: 5 | RNVC: 9
ACB-30C-12P-NT-3: RNCC: 5 | RNVC: 9

12 Aug 1988

3040-01-283-5030
Shouldered Shaft

012835030
400257: RNCC: 3 | RNVC: 2

6 Aug 1988

3040-01-283-4578
Shouldered Shaft

012834578
M534K33-36: RNCC: 3 | RNVC: 2
5-11-846-45-51: RNCC: 5 | RNVC: 2

6 Aug 1988

3040-01-283-4356
Manual Control Lever

012834356
9379233-2: RNCC: 3 | RNVC: 2
9379233-2: RNCC: 5 | RNVC: 2

5 Aug 1988

3040-01-292-4909
Shouldered Shaft

012924909
07 43 024 3: RNCC: 3 | RNVC: 9

17 Jan 1989

3040-01-292-4907
Shouldered Shaft

012924907
02 43 066 1000: RNCC: 3 | RNVC: 9

17 Jan 1989

3040-01-292-4908
Shouldered Shaft

012924908
02 43 066 3: RNCC: 3 | RNVC: 9

17 Jan 1989

3040-01-283-1967
Solenoid Valve Linkage

012831967
AV-430: RNCC: 3 | RNVC: 2

30 Jul 1988

3040-01-282-6667
Mechanical Drive Housing

012826667
RI242-5: RNCC: 3 | RNVC: 2

20 Jul 1988

3040-01-282-6475
Linear Actuating Cylinder Assembly

012826475
00241-0150: RNCC: 3 | RNVC: 2
50053801: RNCC: 5 | RNVC: 2
00241-0150: RNCC: 5 | RNVC: 9
00241-0150: RNCC: 5 | RNVC: 9
1366AS1005: RNCC: 7 | RNVC: 2

20 Jul 1988

3040-01-282-5772
Shouldered Shaft

012825772
18579-0000: RNCC: 3 | RNVC: 2

18 Jul 1988

3040-01-282-5185
Linear Actuating Cylinder

012825185
7-372-001978: RNCC: 3 | RNVC: 2

16 Jul 1988

3040-01-282-4987
Ball Joint

012824987
31126: RNCC: 3 | RNVC: 9

16 Jul 1988

3040-01-282-1739
Shouldered Shaft

012821739
T67040: RNCC: 3 | RNVC: 2
T67040: RNCC: 5 | RNVC: 9

9 Jul 1988

3040-01-281-9278
Hub Clamp

012819278
639AS3806: RNCC: 3 | RNVC: 2
10107005: RNCC: 6 | RNVC: 9

4 Jul 1988

3040-01-281-7914
Linear Actuating Cylinder Assembly Parts Kit

012817914
9-752-100672: RNCC: 3 | RNVC: 2

1 Jul 1988

3040-01-281-7910
Straight Shaft

012817910
312-1133-001: RNCC: 3 | RNVC: 2
312-1133-001: RNCC: 3 | RNVC: 2
9722100847: RNCC: 5 | RNVC: 2
9722100847: RNCC: 5 | RNVC: 2
9722100847: RNCC: 5 | RNVC: 2
2GK349: RNCC: 5 | RNVC: 2
2GK349: RNCC: 5 | RNVC: 9
321-1135-001: RNCC: 5 | RNVC: 9
321-1133-001: RNCC: 5 | RNVC: 9
321-1135-001: RNCC: 5 | RNVC: 9

1 Jul 1988

3040-01-281-6932
Hydraulic Control Receiver-Transmitter

012816932
14741107-1: RNCC: 3 | RNVC: 9
14741107-1: RNCC: 5 | RNVC: 2
14741107-1: RNCC: 5 | RNVC: 9
14741107-1/14741000: RNCC: C | RNVC: 1

29 Jun 1988

3040-01-281-5808
Shaft Retaining Plate

012815808
019-17001-52: RNCC: 3 | RNVC: 2

28 Jun 1988

3040-01-281-1515
Manual Control Lever

012811515
CH5-0405: RNCC: 3 | RNVC: 2

17 Jun 1988

3040-01-281-1099
Linear Actuating Cylinder Assembly

012811099
G109819: RNCC: 3 | RNVC: 2

17 Jun 1988

3040-01-280-8236
Body Hub

012808236
5137983: RNCC: 3 | RNVC: 2

13 Jun 1988

3040-01-280-5009
Linear Actuating Cylinder Assembly

012805009
G109831: RNCC: 3 | RNVC: 2

11 Jun 1988

3040-01-288-4061
Rigid Connecting Link

012884061
166602: RNCC: 3 | RNVC: 9

5 Nov 1988

3040-01-284-5403
Control Cam

012845403
2971760-1: RNCC: 3 | RNVC: 2

25 Aug 1988

3040-01-284-4928
Linear Actuating Cylinder

012844928
02-40703-7: RNCC: 3 | RNVC: 2
02-40703-7: RNCC: 3 | RNVC: 9
02-60132 ITEM 6: RNCC: 5 | RNVC: 9
02-60132 ITEM 6: RNCC: C | RNVC: 1
02-40703-7: RNCC: C | RNVC: 1
02-60132: RNCC: D | RNVC: 9

24 Aug 1988

3040-01-282-5016
Manual Control Lever

012825016
451007: RNCC: 3 | RNVC: 9
NB-3160 451007: RNCC: 5 | RNVC: 9
451007: RNCC: 5 | RNVC: 9
NB-3160 451007: RNCC: 5 | RNVC: 9
451007: RNCC: C | RNVC: 1
NB-3160 451007: RNCC: C | RNVC: 1
451007: RNCC: C | RNVC: 1
NB-3160 451007: RNCC: C | RNVC: 1

16 Jul 1988

3040-01-279-4659
Bell Crank

012794659
20511102: RNCC: 3 | RNVC: 2
20511102: RNCC: 5 | RNVC: 2
20511102: RNCC: 5 | RNVC: 9

18 May 1988

3040-01-279-4586
Shouldered Shaft

012794586
415630: RNCC: 3 | RNVC: 2
303658: RNCC: 5 | RNVC: 9

18 May 1988

3040-01-279-1585
Repair Kit Ram

012791585
R-59-19 RPR KIT: RNCC: 3 | RNVC: 1
RK5: RNCC: 5 | RNVC: 1
DB-86-048: RNCC: 5 | RNVC: 9

14 May 1988

3040-01-279-1483
Linear Actuating Cylinder Piston Rod

012791483
SV2-0701: RNCC: 3 | RNVC: 2

13 May 1988

3040-01-279-0264
Control Cam

012790264
114506: RNCC: 3 | RNVC: 2

12 May 1988

3040-01-279-0265
Manual Control Lever

012790265
NB22703925: RNCC: 3 | RNVC: 2
22703925: RNCC: 5 | RNVC: 9
E3650 1.25IN PC NO 24: RNCC: C | RNVC: 1
B22703925: RNCC: C | RNVC: 1

12 May 1988

3040-01-277-8381
Shouldered Shaft

012778381
037-1431-00-0: RNCC: 3 | RNVC: 2

28 Apr 1988

3040-01-277-6521
Shouldered Shaft

012776521
384-0878-07: RNCC: 3 | RNVC: 2

25 Apr 1988

3040-01-277-6520
Straight Shaft

012776520
384-1180-00: RNCC: 3 | RNVC: 2

25 Apr 1988

3040-01-277-5598
Body Hub

012775598
05-4128: RNCC: 3 | RNVC: 2
SK 138: RNCC: 5 | RNVC: 2
SKR-1.375: RNCC: 5 | RNVC: 9
05-4100/4141: RNCC: D | RNVC: 9

22 Apr 1988

3040-01-277-2504
Disc Brake Caliper Assembly

012772504
6-188-000046: RNCC: 3 | RNVC: 2

19 Apr 1988

3040-01-277-2509
Linear Actuating Cylinder Assembly

012772509
RC106-1: RNCC: 3 | RNVC: 9

19 Apr 1988

3040-01-277-1637
Pawl

012771637
4005134-0003: RNCC: 3 | RNVC: 2

19 Apr 1988

3040-01-277-1527
Flexible Shaft Assembly

012771527
E0TZ17260D: RNCC: 3 | RNVC: 9
E0TZ17260D: RNCC: 5 | RNVC: 9

18 Apr 1988

3040-01-277-0314
Straight Shaft

012770314
13228E6108: RNCC: 3 | RNVC: 2
BS.2318.00.00.077: RNCC: 5 | RNVC: 9
BS.2318.00.00.027: RNCC: 5 | RNVC: 9

16 Apr 1988

3040-01-276-9261
Breather

012769261
7-258-000063: RNCC: 3 | RNVC: 9
7-258-000063: RNCC: 5 | RNVC: 2

14 Apr 1988

3040-01-275-5249
Shouldered Shaft

012755249
8098077: RNCC: 3 | RNVC: 9

23 Mar 1988

3040-01-275-4223
Straight Shaft

012754223
6L2947: RNCC: 3 | RNVC: 2

21 Mar 1988

3040-01-276-0075
Rotating Shaft Eye Bracket

012760075
0819006-3: RNCC: 3 | RNVC: 2
0819006-3: RNCC: 3 | RNVC: 9

2 Apr 1988

3040-01-275-2589
Rigid Connecting Link

012752589
9376154: RNCC: 3 | RNVC: 2

19 Mar 1988

3040-01-274-9281
Shaft Collar

012749281
277510: RNCC: 3 | RNVC: 2

16 Mar 1988

3040-01-274-6354
Rigid Connecting Link

012746354
9376153: RNCC: 3 | RNVC: 2

11 Mar 1988

3040-01-274-5368
Pawl

012745368
360210-10: RNCC: 3 | RNVC: 2
10186333: RNCC: 6 | RNVC: 9
360210: RNCC: D | RNVC: 9

10 Mar 1988

3040-01-274-1705
Shaft Collar

012741705
1819044: RNCC: 3 | RNVC: 2

5 Mar 1988

3040-01-274-1551
Mechanical Drive Housing

012741551
12345546: RNCC: 3 | RNVC: 2

5 Mar 1988

3040-01-273-9183
Straight Shaft

012739183
214A-16: RNCC: 3 | RNVC: 2

3 Mar 1988

3040-01-273-6059
Manual Control Lever

012736059
10527984: RNCC: 3 | RNVC: 2

27 Feb 1988

NSN 3040-01-273-5823 012735823 BELL CRANK

3040-01-273-5823
Bell Crank

012735823
214A-26: RNCC: 3 | RNVC: 2

26 Feb 1988

3040-01-273-5597
Shouldered Shaft

012735597
1853810: RNCC: 3 | RNVC: 2

26 Feb 1988

3040-01-273-5596
Shouldered Shaft

012735596
1819048: RNCC: 3 | RNVC: 2

26 Feb 1988

3040-01-273-0357
Straight Shaft

012730357
201008: RNCC: 3 | RNVC: 9

19 Feb 1988

3040-01-272-0327
Rigid Connecting Link

012720327
P954: RNCC: 3 | RNVC: 2
P954: RNCC: 5 | RNVC: 2

3 Feb 1988

3040-01-272-7647
Rigid Connecting Link

012727647
5592016: RNCC: 3 | RNVC: 2
12340994-2: RNCC: 5 | RNVC: 2
12340994: RNCC: D | RNVC: 9

13 Feb 1988

3040-01-272-7608
Straight Shaft

012727608
J143723: RNCC: 3 | RNVC: 2
C20035D008: RNCC: C | RNVC: 1

13 Feb 1988

3040-01-272-6691
Linear Actuating Cylinder Assembly Parts Kit

012726691
RE14102: RNCC: 3 | RNVC: 2
RE14102: RNCC: 5 | RNVC: 9

12 Feb 1988

3040-01-272-3972
Remote Control Lever

012723972
2950840: RNCC: 3 | RNVC: 2

8 Feb 1988

3040-01-272-2874
Mechanical Drive Housing

012722874
361506: RNCC: 3 | RNVC: 9

5 Feb 1988

3040-01-271-5118
Body Hub

012715118
3907757: RNCC: 3 | RNVC: 2

27 Jan 1988

3040-01-271-3855
Straight Shaft

012713855
9375967: RNCC: 3 | RNVC: 2

23 Jan 1988

3040-01-271-3822
Remote Control Lever

012713822
1310194: RNCC: 3 | RNVC: 2

23 Jan 1988

3040-01-271-3821
Remote Control Lever

012713821
3912484: RNCC: 3 | RNVC: 2

23 Jan 1988

3040-01-271-3823
Rigid Connecting Link

012713823
96377: RNCC: 3 | RNVC: 2
96377: RNCC: 5 | RNVC: 9

23 Jan 1988

3040-01-271-3809
Linear Actuating Cylinder Piston

012713809
333842: RNCC: 3 | RNVC: 2
C553097: RNCC: 5 | RNVC: 2
333842: RNCC: 5 | RNVC: 9

23 Jan 1988

3040-01-271-0271
Nonrotating Shaft Eye Bracket

012710271
8759025: RNCC: 3 | RNVC: 2

16 Jan 1988

3040-01-270-8466
Shouldered Shaft

012708466
5003701: RNCC: 3 | RNVC: 2
051-00001-14: RNCC: 5 | RNVC: 2
H324-1: RNCC: 5 | RNVC: 9

14 Jan 1988

3040-01-270-5737
Remote Control Lever

012705737
FULK3491: RNCC: 3 | RNVC: 2
039-90011-61: RNCC: 5 | RNVC: 2
478881C92: RNCC: 5 | RNVC: 9

9 Jan 1988

3040-01-270-5049
Push-Pull Control Assembly

012705049
4294233: RNCC: 3 | RNVC: 2

7 Jan 1988

3040-01-270-4968
Linear Actuating Cylinder Assembly Parts Kit

012704968
12508: RNCC: 3 | RNVC: 2

7 Jan 1988

3040-01-270-2508
Shaft Collar

012702508
95J537-61: RNCC: 3 | RNVC: 2
H-3107068 PIECE 61: RNCC: 5 | RNVC: 2
1-JH-3267 PIECE 61: RNCC: 5 | RNVC: 9

1 Jan 1988

3040-01-270-2512
Filler-Breather

012702512
AB-1010-8: RNCC: 3 | RNVC: 2
AB-1010-8-MOD: RNCC: 5 | RNVC: 9

1 Jan 1988

3040-01-267-7006
Shaft Collar

012677006
8509760: RNCC: 3 | RNVC: 2

17 Nov 1987

3040-01-270-0897
Straight Shaft

012700897
6-810-002059: RNCC: 3 | RNVC: 2

29 Dec 1987

3040-01-269-8882
Linear Actuating Cylinder Assembly

012698882
140669B: RNCC: 3 | RNVC: 2
1499090: RNCC: 5 | RNVC: 9
2178330: RNCC: 5 | RNVC: 9
140657B: RNCC: 5 | RNVC: 9
9401-048: RNCC: 5 | RNVC: 9
3173419: RNCC: 5 | RNVC: 9
HI8410-019: RNCC: 5 | RNVC: 9
125113915: RNCC: 5 | RNVC: 9
8410-019: RNCC: 5 | RNVC: 9
3173419: RNCC: C | RNVC: 1

23 Dec 1987

3040-01-269-6602
Straight Shaft

012696602
709 1554: RNCC: 3 | RNVC: 2
709 1554: RNCC: 5 | RNVC: 9

18 Dec 1987

3040-01-268-9890
Straight Shaft

012689890
6-810-000999: RNCC: 3 | RNVC: 2

10 Dec 1987

3040-01-268-9885
Straight Shaft

012689885
25332: RNCC: 3 | RNVC: 9
207437: RNCC: 5 | RNVC: 2

10 Dec 1987

3040-01-268-9771
Pneumatic Actuator Cylinder Housing

012689771
P110402-0060: RNCC: 3 | RNVC: 9

10 Dec 1987

3040-01-268-8448
Linear Actuating Cylinder Assembly Parts Kit

012688448
9-752-100673: RNCC: 3 | RNVC: 2

8 Dec 1987

3040-01-268-8343
Linear Actuating Cylinder Piston Rod

012688343
P155691-3060: RNCC: 3 | RNVC: 9

8 Dec 1987

3040-01-268-6077
Blower Drive Gear Hub

012686077
8925447: RNCC: 3 | RNVC: 2

4 Dec 1987

3040-01-268-5413
Flexible Shaft Assembly

012685413
D7TZ17260J: RNCC: 3 | RNVC: 9
D7TZ17260J: RNCC: 5 | RNVC: 9

2 Dec 1987

3040-01-268-5391
Linear Actuating Cylinder Assembly

012685391
P159794: RNCC: 3 | RNVC: 9
P151841 PIECE P159794: RNCC: 5 | RNVC: 9
P151841: RNCC: D | RNVC: 9

2 Dec 1987

3040-01-268-5343
Shouldered Shaft

012685343
6066-2A: RNCC: 3 | RNVC: 2
122-90007-33: RNCC: 5 | RNVC: 2
122-00033-2A: RNCC: 5 | RNVC: 2
122-90007: RNCC: D | RNVC: 9

2 Dec 1987

3040-01-264-9552
Rigid Connecting Link

012649552
673050: RNCC: 3 | RNVC: 9
673050: RNCC: 5 | RNVC: 9
PL-H-7814 ITEM 53: RNCC: 5 | RNVC: 9
H-7814 ITEM 53: RNCC: 5 | RNVC: 9
H-7814 ITEM 53: RNCC: 5 | RNVC: 9
PL-H-7814 ITEM 53: RNCC: 5 | RNVC: 9
673050: RNCC: C | RNVC: 1
PL-H-7814 ITEM 53: RNCC: C | RNVC: 1
H-7814 ITEM 53: RNCC: C | RNVC: 1
673050: RNCC: C | RNVC: 1

8 Oct 1987

3040-01-268-2497
Rigid Connecting Link

012682497
514-1495-2: RNCC: 3 | RNVC: 2

26 Nov 1987

3040-01-268-1489
Shaft Retaining Plate

012681489
4046960: RNCC: 3 | RNVC: 2
206917: RNCC: 3 | RNVC: 2
4046755: RNCC: 5 | RNVC: 9

23 Nov 1987

3040-01-268-0305
Shaft Retaining Plate

012680305
5P1744: RNCC: 3 | RNVC: 2

21 Nov 1987

3040-01-267-8650
Straight Shaft

012678650
7G2071: RNCC: 3 | RNVC: 2

19 Nov 1987

3040-01-267-7911
Shouldered Shaft

012677911
704AS3458: RNCC: 3 | RNVC: 2
893458-1: RNCC: 5 | RNVC: 2
893458: RNCC: D | RNVC: 9

18 Nov 1987

3040-01-267-1388
Bell Crank

012671388
NW23103: RNCC: 3 | RNVC: 2
23103: RNCC: 5 | RNVC: 9

5 Nov 1987

3040-01-267-0477
Disc Brake Caliper Assembly

012670477
9630149: RNCC: 3 | RNVC: 9
231-4953-143: RNCC: 5 | RNVC: 2
231-4953-143: RNCC: C | RNVC: 1

4 Nov 1987

3040-01-267-0261
Extension Shaft

012670261
7W2015: RNCC: 3 | RNVC: 2

4 Nov 1987

3040-01-267-0183
Straight Shaft

012670183
275.003: RNCC: 3 | RNVC: 2
275.003: RNCC: 5 | RNVC: 2
0275.003: RNCC: C | RNVC: 1

4 Nov 1987

3040-01-266-6328
Spur Gearshaft

012666328
2010-411 ITEM 23: RNCC: 3 | RNVC: 1
2010-409 ITEM 23: RNCC: 5 | RNVC: 1
2010-409 ITEM 23SS: RNCC: 5 | RNVC: 2
2010-411 ITEM 23SS: RNCC: 5 | RNVC: 2

29 Oct 1987

3040-01-266-1389
Linear Actuating Cylinder Assembly Parts Kit

012661389
RE19217: RNCC: 3 | RNVC: 2

21 Oct 1987

3040-01-266-0791
Remote Control Lever

012660791
93-C106-2: RNCC: 3 | RNVC: 2

20 Oct 1987

3040-01-265-4021
Manual Control Lever

012654021
SH413081: RNCC: 3 | RNVC: 2
SH8834A: RNCC: 3 | RNVC: 9

14 Oct 1987

3040-01-265-3209
Linear Actuating Cylinder Assembly Parts Kit

012653209
66048: RNCC: 3 | RNVC: 2
25271: RNCC: 5 | RNVC: 9

11 Oct 1987

3040-01-264-9553
Rigid Connecting Link

012649553
1339760W: RNCC: 3 | RNVC: 2
1339760W: RNCC: 5 | RNVC: 9

8 Oct 1987

3040-01-264-8444
Shaft Retaining Plate

012648444
1357026: RNCC: 3 | RNVC: 2
150-0301: RNCC: 5 | RNVC: 2
345416: RNCC: 5 | RNVC: 9

6 Oct 1987

3040-01-264-5611
Shouldered Shaft

012645611
42419: RNCC: 3 | RNVC: 9
42419: RNCC: 5 | RNVC: 2
709 1935: RNCC: 5 | RNVC: 2

2 Oct 1987

3040-01-264-4732
Linear Actuating Cylinder

012644732
5010325-1: RNCC: 3 | RNVC: 9
5010325-3: RNCC: 5 | RNVC: 9
501032-1: RNCC: C | RNVC: 1
5010325-1: RNCC: C | RNVC: 1
5010325-1: RNCC: C | RNVC: 1

2 Oct 1987

3040-01-264-0769
Pawl

012640769
242: RNCC: 3 | RNVC: 9
1356 ITEM 10: RNCC: 5 | RNVC: 9
242: RNCC: 5 | RNVC: 9
1356 ITEM 10: RNCC: 5 | RNVC: 9
242: RNCC: 5 | RNVC: 9
1356 ITEM 10: RNCC: 5 | RNVC: 9
L7: RNCC: C | RNVC: 1
1356: RNCC: D | RNVC: 9

24 Sep 1987

3040-01-264-0429
Straight Shaft

012640429
740237: RNCC: 3 | RNVC: 2

24 Sep 1987

3040-01-263-9533
Linear Actuating Cylinder

012639533
403212: RNCC: 3 | RNVC: 9
69732: RNCC: 5 | RNVC: 9

22 Sep 1987

3040-01-263-7237
Linear Actuating Cylinder

012637237
1125543C1: RNCC: 3 | RNVC: 9
1125543C1: RNCC: 5 | RNVC: 2

17 Sep 1987

3040-01-263-6504
Nonrotating Shaft Eye Bracket

012636504
B1900-6609: RNCC: 3 | RNVC: 2

17 Sep 1987

3040-01-263-3220
Linear Actuating Cylinder Assembly

012633220
63-0008: RNCC: 3 | RNVC: 9
9428: RNCC: 5 | RNVC: 2
9428: RNCC: 5 | RNVC: 9
9428: RNCC: 5 | RNVC: 9

12 Sep 1987

3040-01-263-3181
Spur Gearshaft

012633181
361893: RNCC: 3 | RNVC: 9
361882: RNCC: D | RNVC: 9

12 Sep 1987

3040-01-263-3023
Manual Control Lever

012633023
3450WA100-9B: RNCC: 3 | RNVC: 9
04120ACL2: RNCC: 5 | RNVC: 9
3450WA100-9B: RNCC: C | RNVC: 1
04120ACL2: RNCC: C | RNVC: 1

12 Sep 1987

3040-01-263-2994
Shouldered Shaft

012632994
010-10013-1: RNCC: 3 | RNVC: 2
010-10013-1: RNCC: 3 | RNVC: 9

12 Sep 1987

3040-01-257-9988
Linear Actuating Cylinder Assembly

012579988
US65.024: RNCC: 3 | RNVC: 9
65024: RNCC: 5 | RNVC: 9

26 Jun 1987

3040-01-263-0082
Bell Crank

012630082
353164: RNCC: 3 | RNVC: 2
353164: RNCC: 5 | RNVC: 9

9 Sep 1987

3040-01-262-7663
Linear Actuating Cylinder Piston Rod

012627663
DH2-275: RNCC: 3 | RNVC: 2
7091006 ITEM 11: RNCC: 5 | RNVC: 2
7091006: RNCC: D | RNVC: 9

3 Sep 1987

3040-01-262-7659
Manual Control Lever

012627659
B68747: RNCC: 3 | RNVC: 9
E305832 ITEM 20: RNCC: 5 | RNVC: 9
E305832 ITEM 20: RNCC: C | RNVC: 1
B68747: RNCC: C | RNVC: 1
E305832: RNCC: D | RNVC: 9

3 Sep 1987

3040-01-262-6227
Mechanical Drive Housing

012626227
D49348-005: RNCC: 3 | RNVC: 9
E305832 ITEM 24: RNCC: 5 | RNVC: 9
D49348-005: RNCC: C | RNVC: 1
E305832 ITEM 24: RNCC: C | RNVC: 1
E305832: RNCC: D | RNVC: 9

2 Sep 1987

3040-01-262-6191
Shouldered Shaft

012626191
352485: RNCC: 3 | RNVC: 2
352485: RNCC: 5 | RNVC: 9

2 Sep 1987

3040-01-262-5225
Shouldered Shaft

012625225
309009: RNCC: 3 | RNVC: 2
309009: RNCC: 5 | RNVC: 9

30 Aug 1987

3040-01-262-2772
Rigid Connecting Link

012622772
309767: RNCC: 3 | RNVC: 2
309767: RNCC: 5 | RNVC: 9

26 Aug 1987

3040-01-262-1301
Remote Control Lever

012621301
896355R21: RNCC: 3 | RNVC: 2

22 Aug 1987

3040-01-262-1300
Remote Control Lever

012621300
4383264: RNCC: 3 | RNVC: 2
4383264: RNCC: 5 | RNVC: 2

22 Aug 1987

3040-01-262-1208
Speedometer-Tachometer Drive Adapter

012621208
468543C91: RNCC: 3 | RNVC: 2

22 Aug 1987

3040-01-262-1204
Linear Actuating Cylinder Piston Rod

012621204
1334440: RNCC: 3 | RNVC: 2
341668: RNCC: 5 | RNVC: 9
1334440: RNCC: 5 | RNVC: 9

22 Aug 1987

3040-01-262-0793
Straight Shaft

012620793
B-119034: RNCC: 3 | RNVC: 2

22 Aug 1987

3040-01-262-0798
Shouldered Shaft

012620798
261478: RNCC: 3 | RNVC: 2

22 Aug 1987

3040-01-262-0795
Straight Shaft

012620795
B-122438: RNCC: 3 | RNVC: 2

22 Aug 1987

3040-01-261-8027
Flexible Shaft Assembly

012618027
5162760: RNCC: 3 | RNVC: 2
4162760: RNCC: 5 | RNVC: 9
4363050: RNCC: 5 | RNVC: 9

19 Aug 1987

3040-01-261-5479
Remote Control Lever

012615479
206834: RNCC: 3 | RNVC: 2
88 550 053: RNCC: 5 | RNVC: 2

15 Aug 1987

3040-01-261-3944
Push-Pull Control Assembly

012613944
101240-001: RNCC: 3 | RNVC: 2
101240: RNCC: 5 | RNVC: 2

12 Aug 1987

3040-01-254-5562
Shaft Collar

012545562
314274-001: RNCC: 3 | RNVC: 2
314274: RNCC: D | RNVC: 9

7 May 1987

3040-01-261-1125
Pawl

012611125
9051-826-1: RNCC: 3 | RNVC: 9
9051-826-1: RNCC: 5 | RNVC: 9
9051-826: RNCC: D | RNVC: 9

8 Aug 1987

3040-01-260-3346
Rigid Connecting Link

012603346
J5450661: RNCC: 3 | RNVC: 2
5450661: RNCC: 5 | RNVC: 9

29 Jul 1987

3040-01-251-3186
Push-Pull Control Assembly

012513186
183LGG2175: RNCC: 3 | RNVC: 2
183LGG2175: RNCC: 5 | RNVC: 2
183LGG2175: RNCC: 5 | RNVC: 9

17 Mar 1987

3040-01-259-1722
Shaft Collar

012591722
35500-0213: RNCC: 3 | RNVC: 9
35500-0213: RNCC: 5 | RNVC: 2
15080: RNCC: 5 | RNVC: 9
15060: RNCC: C | RNVC: 1

14 Jul 1987

3040-01-258-6906
Shouldered Shaft

012586906
5102471: RNCC: 3 | RNVC: 2

6 Jul 1987

3040-01-258-6487
Flexible Shaft Assembly

012586487
D3-050-36: RNCC: 3 | RNVC: 2
NAVAL REPAIR PART: RNCC: 5 | RNVC: 1

5 Jul 1987

3040-01-258-5456
Shouldered Shaft

012585456
9340M55P02: RNCC: 3 | RNVC: 2
9340M55P02: RNCC: 5 | RNVC: 2
9340M55P02 REV J: RNCC: 5 | RNVC: 2
9340M55P02: RNCC: 5 | RNVC: 2
9340M55P02: RNCC: 5 | RNVC: 9
9340M55P02: RNCC: 5 | RNVC: 9
42411-165: RNCC: 5 | RNVC: 9

3 Jul 1987

3040-01-257-9890
Push-Pull Control Assembly

012579890
AT59387: RNCC: 3 | RNVC: 2
P012928: RNCC: 5 | RNVC: 2
AT64382: RNCC: 5 | RNVC: 2
AT64382: RNCC: 5 | RNVC: 2
AT45257: RNCC: 5 | RNVC: 9
P012928: RNCC: 5 | RNVC: 9

26 Jun 1987

3040-01-257-9889
Push-Pull Control Assembly

012579889
AT54663: RNCC: 3 | RNVC: 2

26 Jun 1987

3040-01-257-9887
Push-Pull Control Assembly

012579887
AT107004: RNCC: 3 | RNVC: 2
AT47816: RNCC: 5 | RNVC: 9

26 Jun 1987

3040-01-257-9891
Push-Pull Control Assembly

012579891
AT82975: RNCC: 3 | RNVC: 2
AT62376: RNCC: 5 | RNVC: 9

26 Jun 1987

3040-01-257-8543
Brake Backing Plate

012578543
5-26-2004-00: RNCC: 3 | RNVC: 9
5-26-2004: RNCC: 5 | RNVC: 9

25 Jun 1987

3040-01-257-3858
Mechanical Drive Housing

012573858
7709247: RNCC: 3 | RNVC: 2

18 Jun 1987

3040-01-257-3632
Shouldered Shaft

012573632
37SH1000B01: RNCC: 3 | RNVC: 2
37SH1000B01: RNCC: 3 | RNVC: 9
37-3355: RNCC: 5 | RNVC: 2
37-3355: RNCC: 5 | RNVC: 9
SPEC#37M93X56: RNCC: C | RNVC: 1

17 Jun 1987

3040-01-257-1516
Straight Shaft

012571516
23797: RNCC: 3 | RNVC: 2
2BW14: RNCC: 5 | RNVC: 2
2BW14: RNCC: 5 | RNVC: 9

12 Jun 1987

3040-01-256-6539
Linear Actuating Cylinder Assembly

012566539
1004009: RNCC: 3 | RNVC: 2

7 Jun 1987

3040-01-256-0647
Body Hub

012560647
5102889: RNCC: 3 | RNVC: 2

31 May 1987

3040-01-255-7939
Mechanical Drive Housing

012557939
12288063: RNCC: 3 | RNVC: 2

27 May 1987

3040-01-255-6731
Rigid Connecting Link

012556731
3970760: RNCC: 3 | RNVC: 2
3970760: RNCC: 5 | RNVC: 9

23 May 1987

3040-01-255-6080
Shouldered Shaft

012556080
3537228-001: RNCC: 3 | RNVC: 9
3536042-001: RNCC: 5 | RNVC: 9

22 May 1987

3040-01-255-5940
Selector Shaft

012555940
3082208051: RNCC: 3 | RNVC: 9
3082208051: RNCC: 5 | RNVC: 2

22 May 1987

3040-01-255-4406
Linear Actuating Cylinder Piston

012554406
29503808: RNCC: 3 | RNVC: 2
ZHL512: RNCC: 5 | RNVC: 2
000508T: RNCC: 5 | RNVC: 2
6774881: RNCC: 5 | RNVC: 9
2AX851: RNCC: 5 | RNVC: 9
23018444: RNCC: 5 | RNVC: 9
ZHL512: RNCC: 5 | RNVC: 9
6883668: RNCC: C | RNVC: 1
23011093: RNCC: C | RNVC: 1

20 May 1987

3040-01-255-3229
Shouldered Shaft

012553229
438579-001: RNCC: 3 | RNVC: 2

19 May 1987

3040-01-255-2950
Manual Control Lever

012552950
3747135: RNCC: 3 | RNVC: 2

18 May 1987

3040-01-255-2949
Manual Control Lever

012552949
4213415: RNCC: 3 | RNVC: 2
4213415: RNCC: 5 | RNVC: 9

18 May 1987

3040-01-255-2916
Shouldered Shaft

012552916
4115147: RNCC: 3 | RNVC: 2

18 May 1987

3040-01-255-2898
Control Cam

012552898
92057-1170: RNCC: 3 | RNVC: 9

18 May 1987

3040-01-255-1611
Remote Control Lever

012551611
T21771: RNCC: 3 | RNVC: 2

15 May 1987

3040-01-255-1394
Manual Control Lever

012551394
785.129: RNCC: 3 | RNVC: 2
785.129: RNCC: 5 | RNVC: 2

15 May 1987

3040-01-255-1383
Control Cam

012551383
2001852-1: RNCC: 3 | RNVC: 2

15 May 1987

3040-01-254-6053
Brake Backing Plate

012546053
4642 308 185: RNCC: 3 | RNVC: 9
4642308185: RNCC: 5 | RNVC: 2
T116582: RNCC: 5 | RNVC: 2
T116582: RNCC: 5 | RNVC: 9

8 May 1987

3040-01-254-5578
Winch Drive Assembly

012545578
3P1735: RNCC: 3 | RNVC: 2

7 May 1987

3040-01-254-5575
Governor Shaft Assembly

012545575
8M7836: RNCC: 3 | RNVC: 2

7 May 1987

3040-01-254-5565
Straight Shaft

012545565
428159-001: RNCC: 3 | RNVC: 2
428159: RNCC: D | RNVC: 9

7 May 1987

3040-01-254-5564
Straight Shaft

012545564
4N0951: RNCC: 3 | RNVC: 2

7 May 1987

3040-01-254-5369
Nonrotating Shaft Eye Bracket

012545369
12296219: RNCC: 3 | RNVC: 2

7 May 1987

3040-01-254-5022
Shaft Retaining Plate

012545022
8P5163: RNCC: 3 | RNVC: 2

6 May 1987

3040-01-254-4974
Manual Control Lever

012544974
4W5734: RNCC: 3 | RNVC: 2

5 May 1987

3040-01-254-4940
Shouldered Shaft

012544940
3P6281: RNCC: 3 | RNVC: 2

5 May 1987

3040-01-254-4939
Shouldered Shaft

012544939
1P2175: RNCC: 3 | RNVC: 2

5 May 1987

3040-01-254-4110
Shaft Collar

012544110
E99-026: RNCC: 3 | RNVC: 9

5 May 1987

3040-01-254-3256
Linear Actuating Cylinder Assembly

012543256
025039: RNCC: 3 | RNVC: 2

5 May 1987

3040-01-242-4206
Straight Shaft

012424206
SHF213: RNCC: 3 | RNVC: 9
SHF213: RNCC: 5 | RNVC: 9
HL-20010 PIECE 21: RNCC: 5 | RNVC: 9
HL-20010 PIECE 21: RNCC: 5 | RNVC: 9
HL-20010 PIECE 21: RNCC: C | RNVC: 1
SHF213: RNCC: C | RNVC: 1
SHF-213: RNCC: C | RNVC: 1
SHF213: RNCC: C | RNVC: 1
HL-20010 PIECE 21: RNCC: C | RNVC: 1

11 Oct 1986

3040-01-254-1006
Straight Shaft

012541006
1P4056: RNCC: 3 | RNVC: 2

1 May 1987

3040-01-254-1007
Straight Shaft

012541007
1P2593: RNCC: 3 | RNVC: 2

1 May 1987

3040-01-253-9425
Shouldered Shaft

012539425
1P8715: RNCC: 3 | RNVC: 2

28 Apr 1987

3040-01-253-9424
Shouldered Shaft

012539424
7G3331: RNCC: 3 | RNVC: 2

28 Apr 1987

3040-01-253-8120
Straight Shaft

012538120
E99-060: RNCC: 3 | RNVC: 9

25 Apr 1987

3040-01-253-8121
Straight Shaft

012538121
E99-129: RNCC: 3 | RNVC: 9

25 Apr 1987

3040-01-253-8122
Shouldered Shaft

012538122
E99-007: RNCC: 3 | RNVC: 9

25 Apr 1987

3040-01-253-8119
Straight Shaft

012538119
E99-536: RNCC: 3 | RNVC: 9

25 Apr 1987

3040-01-253-7458
Rigid Connecting Link

012537458
3P7680: RNCC: 3 | RNVC: 2

24 Apr 1987

3040-01-253-7453
Remote Control Lever

012537453
4N7032: RNCC: 3 | RNVC: 2

24 Apr 1987

3040-01-253-7403
Mechanical Drive Housing

012537403
16K0639-803: RNCC: 3 | RNVC: 2
16K0677-801: RNCC: 5 | RNVC: 9
16K0677-805: RNCC: 5 | RNVC: 9
3040PL0667941: RNCC: 6 | RNVC: 9

24 Apr 1987

3040-01-253-7349
Straight Shaft

012537349
9P5948: RNCC: 3 | RNVC: 2

24 Apr 1987

3040-01-253-7223
Straight Shaft

012537223
139C6482-2: RNCC: 3 | RNVC: 2

24 Apr 1987

3040-01-241-4271
Manual Control Lever

012414271
01190100: RNCC: 3 | RNVC: 9
049531: RNCC: 5 | RNVC: 2
X-10034: RNCC: 5 | RNVC: 9
49531: RNCC: 5 | RNVC: 9
5923: RNCC: 5 | RNVC: 9
1-5923: RNCC: D | RNVC: 9

25 Sep 1986

3040-01-253-4699
Remote Control Lever

012534699
2P3980: RNCC: 3 | RNVC: 2

18 Apr 1987

3040-01-253-4682
Linear Actuating Cylinder Head

012534682
0031862K1: RNCC: 3 | RNVC: 2
003186K1: RNCC: 3 | RNVC: 2
482282C1: RNCC: 5 | RNVC: 2
0031292: RNCC: 5 | RNVC: 9
7537682: RNCC: D | RNVC: 9

18 Apr 1987

3040-01-253-4662
Manual Control Lever

012534662
3P3931: RNCC: 3 | RNVC: 2

18 Apr 1987

3040-01-253-4655
Mechanical Drive Housing

012534655
5R7240: RNCC: 3 | RNVC: 2

18 Apr 1987

3040-01-253-3470
Manual Control Lever

012533470
3P7651: RNCC: 3 | RNVC: 2

17 Apr 1987

3040-01-253-3467
Mechanical Drive Housing

012533467
8M8640: RNCC: 3 | RNVC: 2

17 Apr 1987

3040-01-253-3464
Mechanical Drive Housing

012533464
159505: RNCC: 3 | RNVC: 2
4N9540: RNCC: 5 | RNVC: 2

17 Apr 1987

3040-01-253-2826
Shaft Collar

012532826
C5NF-11166-A: RNCC: 3 | RNVC: 2
C5NF-11166-A: RNCC: C | RNVC: 1

16 Apr 1987

3040-01-253-0563
Linear Actuating Cylinder Assembly

012530563
11985: RNCC: 3 | RNVC: 2
SA6034048FA-00: RNCC: 3 | RNVC: 2

11 Apr 1987

3040-01-253-0446
Shouldered Shaft

012530446
154-002-545: RNCC: 3 | RNVC: 2

11 Apr 1987

3040-01-252-8500
Linear Actuating Cylinder Assembly

012528500
11984: RNCC: 3 | RNVC: 2
SA4505032LA-01: RNCC: 3 | RNVC: 2

8 Apr 1987

3040-01-252-8498
Linear Actuating Cylinder Assembly

012528498
HS3512024SA-00: RNCC: 3 | RNVC: 2
119 8: RNCC: 3 | RNVC: 2

8 Apr 1987

3040-01-239-6545
Shaft Collar

012396545
150614-1: RNCC: 3 | RNVC: 2

1 Sep 1986

3040-01-251-9953
Control Cam

012519953
5106129: RNCC: 3 | RNVC: 2

27 Mar 1987

3040-01-251-6235
Spur Gearshaft

012516235
2210133-1: RNCC: 3 | RNVC: 2
2210133: RNCC: D | RNVC: 9

21 Mar 1987

3040-01-251-6216
Straight Shaft

012516216
07T33974: RNCC: 3 | RNVC: 2
07T33974: RNCC: 5 | RNVC: 2

21 Mar 1987

3040-01-251-4615
Shaft Retaining Plate

012514615
AT162246: RNCC: 3 | RNVC: 2
AT44088: RNCC: 5 | RNVC: 9

19 Mar 1987

3040-01-250-8623
Remote Control Lever

012508623
HH-133: RNCC: 3 | RNVC: 2

7 Mar 1987

3040-01-250-6495
Manual Control Lever

012506495
2P9482: RNCC: 3 | RNVC: 2

5 Mar 1987

3040-01-250-5008
Spli Shaft Assembly

012505008
101502-002: RNCC: 3 | RNVC: 2

3 Mar 1987

3040-01-250-1852
Shouldered Shaft

012501852
126688: RNCC: 3 | RNVC: 9
A14311: RNCC: 5 | RNVC: 9
014311: RNCC: 5 | RNVC: 9

26 Feb 1987

3040-01-250-1718
Rigid Connecting Link

012501718
74898097: RNCC: 3 | RNVC: 2
74898097-6: RNCC: 5 | RNVC: 2
74898097-6: RNCC: 5 | RNVC: 2
74898097: RNCC: 5 | RNVC: 2

26 Feb 1987

3040-01-249-8469
Gear Shaft

012498469
110-10018-1: RNCC: 3 | RNVC: 2
110-10018-1: RNCC: 3 | RNVC: 9

19 Feb 1987

3040-01-249-8443
Rigid Connecting Link

012498443
1337300W: RNCC: 3 | RNVC: 2
1337300W: RNCC: 5 | RNVC: 9

19 Feb 1987

3040-01-249-5230
Shouldered Shaft

012495230
A6968C: RNCC: 3 | RNVC: 2

12 Feb 1987

3040-01-249-3539
Rotating Shaft Eye Bracket

012493539
70108-28170-101: RNCC: 3 | RNVC: 2
70108-28170: RNCC: D | RNVC: 9

11 Feb 1987

3040-01-249-3459
Friction Lining

012493459
A-0-1043: RNCC: 3 | RNVC: 2
05342: RNCC: 5 | RNVC: 2

11 Feb 1987

3040-01-249-3314
Friction Lining

012493314
146500CQ: RNCC: 3 | RNVC: 2
414602: RNCC: 5 | RNVC: 9
414602: RNCC: 5 | RNVC: 9
404805: RNCC: C | RNVC: 1

10 Feb 1987

3040-01-249-0044
Linear Actuating Cylinder Assembly Parts Kit

012490044
KM3-59: RNCC: 3 | RNVC: 9

4 Feb 1987

3040-01-248-4200
Push-Pull Control Assembly

012484200
15604592: RNCC: 3 | RNVC: 2
15604592: RNCC: 5 | RNVC: 9
14054770: RNCC: 5 | RNVC: 9

23 Jan 1987

3040-01-248-3724
Remote Control Lever

012483724
5-17-2001-00: RNCC: 3 | RNVC: 2
5-17-2001: RNCC: 5 | RNVC: 9

23 Jan 1987

3040-01-248-2815
Linear Actuating Cylinder Assembly

012482815
250011-361: RNCC: 3 | RNVC: 2
S1754: RNCC: 5 | RNVC: 9

21 Jan 1987

3040-01-248-0150
Mechanical Drive Housing

012480150
05976: RNCC: 3 | RNVC: 2
05976: RNCC: 5 | RNVC: 2

15 Jan 1987

3040-01-248-0151
Mechanical Drive Housing

012480151
04951: RNCC: 3 | RNVC: 2
04951: RNCC: 5 | RNVC: 2

15 Jan 1987

3040-01-247-9547
Manual Control Lever

012479547
133511: RNCC: 3 | RNVC: 2
133511: RNCC: 3 | RNVC: 9
25091-C1: RNCC: 5 | RNVC: 9
25091: RNCC: 5 | RNVC: 9
25091-01: RNCC: 5 | RNVC: 9

15 Jan 1987

3040-01-247-9494
Shouldered Shaft

012479494
478919C2: RNCC: 3 | RNVC: 2

15 Jan 1987

3040-01-232-2048
Brush Pulley Shaft

012322048
47751: RNCC: 3 | RNVC: 9
6990-47751: RNCC: 5 | RNVC: 9

9 May 1986

3040-01-247-8862
Worm Shaft

012478862
2034119-0001: RNCC: 3 | RNVC: 9
2034119-0001: RNCC: 5 | RNVC: 2

14 Jan 1987

3040-01-247-7016
Pneumatic Actuator Cylinder Housing

012477016
04383: RNCC: 3 | RNVC: 2
04383: RNCC: 5 | RNVC: 2

9 Jan 1987

3040-01-247-7015
Pneumatic Actuator Cylinder Housing

012477015
04944: RNCC: 3 | RNVC: 2
04944: RNCC: 5 | RNVC: 2

9 Jan 1987

3040-01-247-5488
Straight Shaft

012475488
1854323: RNCC: 3 | RNVC: 2
1976323 ITEM 9: RNCC: 5 | RNVC: 2
1976323: RNCC: D | RNVC: 9

8 Jan 1987

3040-01-247-3649
Shaft Collar

012473649
850888: RNCC: 3 | RNVC: 2
850888: RNCC: C | RNVC: 1

3 Jan 1987

3040-01-247-3284
Remote Control Lever

012473284
4906146-8: RNCC: 3 | RNVC: 2
74906146: RNCC: 5 | RNVC: 2
74906146-1: RNCC: 5 | RNVC: 2

31 Dec 1986

3040-01-247-3107
Remote Control Lever

012473107
13161-1115: RNCC: 3 | RNVC: 2
13161-1115: RNCC: 5 | RNVC: 2
13161-1115: RNCC: 5 | RNVC: 9
13161-1115: RNCC: 5 | RNVC: 9

31 Dec 1986

3040-01-247-2916
Beverage Dispenser Shaft

012472916
041011: RNCC: 3 | RNVC: 2
041016: RNCC: 5 | RNVC: 9
41011: RNCC: 5 | RNVC: 9
041016: RNCC: C | RNVC: 1

31 Dec 1986

3040-01-247-2655
Remote Control Lever

012472655
117789: RNCC: 3 | RNVC: 2
117789: RNCC: 5 | RNVC: 2

31 Dec 1986

3040-01-247-2650
Linear Actuating Cylinder Assembly

012472650
2189460: RNCC: 3 | RNVC: 2
2189460: RNCC: 5 | RNVC: 9
7907-002: RNCC: 5 | RNVC: 9
121907B: RNCC: 5 | RNVC: 9

31 Dec 1986

3040-01-247-0055
Shouldered Shaft

012470055
1600454: RNCC: 3 | RNVC: 2

23 Dec 1986

3040-01-246-7835
Shouldered Shaft

012467835
1395AS223: RNCC: 3 | RNVC: 2

18 Dec 1986

3040-01-246-6346
Linear Actuating Cylinder Assembly Parts Kit

012466346
4162-1300: RNCC: 3 | RNVC: 9
1-949790-2: RNCC: 5 | RNVC: 9

17 Dec 1986

3040-01-246-6029
Declutch Shaft

012466029
60-311-0016-2: RNCC: 3 | RNVC: 2
01-435-0197 PIECE 40: RNCC: 5 | RNVC: 2

16 Dec 1986

3040-01-246-6032
Tripper Lever

012466032
60-505-0032-2: RNCC: 3 | RNVC: 2
01-435-0197 PIECE 15: RNCC: 5 | RNVC: 2

16 Dec 1986

3040-01-246-6033
Torque Housing Cap

012466033
60-122-0024-2: RNCC: 3 | RNVC: 2
01-435-0197 PIECE 6: RNCC: 5 | RNVC: 2

16 Dec 1986

3040-01-246-6031
Clutch Key

012466031
60-563-0013-1: RNCC: 3 | RNVC: 2
01-435-0197 PIECE 23: RNCC: 5 | RNVC: 2

16 Dec 1986

3040-01-246-6030
Clutch Ring

012466030
60-553-0015-1: RNCC: 3 | RNVC: 2
01-435-0197-5 PIECE 33: RNCC: 5 | RNVC: 2

16 Dec 1986

3040-01-246-6034
Wormshaft Bearing Cap

012466034
60-122-0007-1: RNCC: 3 | RNVC: 2
01-435-0197 PIECE 4: RNCC: 5 | RNVC: 2

16 Dec 1986

3040-01-246-5264
Rigid Connecting Link

012465264
1478520W: RNCC: 3 | RNVC: 2
1478520W: RNCC: 5 | RNVC: 9

13 Dec 1986

3040-01-230-1019
Brake Shoe

012301019
1149-23-60-00-0: RNCC: 3 | RNVC: 2
1149 23 60-00: RNCC: C | RNVC: 1

9 Apr 1986

3040-01-245-9214
Shaft Retaining Plate

012459214
D10269-1: RNCC: 3 | RNVC: 2
D9815 ITEM 1: RNCC: 5 | RNVC: 2
D9815: RNCC: D | RNVC: 9

6 Dec 1986

3040-01-245-3742
Rigid Connecting Link

012453742
A8291-1: RNCC: 3 | RNVC: 2
D9815 ITEM 4: RNCC: 5 | RNVC: 2
D9815: RNCC: D | RNVC: 9

26 Nov 1986

3040-01-245-1886
Push-Pull Control Assembly

012451886
4485115: RNCC: 3 | RNVC: 2
3898231: RNCC: 5 | RNVC: 2
3898231: RNCC: 5 | RNVC: 9

24 Nov 1986

3040-01-245-1888
Shaft Retaining Plate

012451888
6-810-001149: RNCC: 3 | RNVC: 2
6-810-0011: RNCC: 5 | RNVC: 9

24 Nov 1986

3040-01-245-0341
Straight Shaft

012450341
215662: RNCC: 3 | RNVC: 2
215662: RNCC: 3 | RNVC: 9
215662: RNCC: 5 | RNVC: 1
215662: RNCC: 5 | RNVC: 9
4035T26: RNCC: D | RNVC: 9

23 Nov 1986

3040-01-244-9750
Shouldered Shaft

012449750
SM-D-773952: RNCC: 3 | RNVC: 2
SM-D-773952: RNCC: 5 | RNVC: 2
8094002: RNCC: 5 | RNVC: 9

23 Nov 1986

3040-01-244-8481
Linear Actuating Cylinder Piston

012448481
04954: RNCC: 3 | RNVC: 2
04954: RNCC: 5 | RNVC: 2

20 Nov 1986

3040-01-244-6052
Shouldered Shaft

012446052
IS0-261: RNCC: 3 | RNVC: 2
UTP12-006600: RNCC: 5 | RNVC: 2
SA72-5: RNCC: 5 | RNVC: 9

15 Nov 1986

3040-01-244-5865
Push-Pull Control Assembly

012445865
72-2147: RNCC: 3 | RNVC: 2
72-2147: RNCC: 5 | RNVC: 2
72-2147: RNCC: 5 | RNVC: 2

15 Nov 1986

3040-01-244-5479
Control Cam

012445479
707212-5: RNCC: 3 | RNVC: 2
707212-5: RNCC: 5 | RNVC: 9

14 Nov 1986

3040-01-244-5127
Rigid Connecting Link

012445127
16102053: RNCC: 3 | RNVC: 9
16102053: RNCC: C | RNVC: 1

14 Nov 1986

3040-01-244-4725
Shouldered Shaft

012444725
6772612: RNCC: 3 | RNVC: 9

14 Nov 1986

3040-01-244-3671
Remote Control Lever

012443671
04939: RNCC: 3 | RNVC: 2
04939: RNCC: 5 | RNVC: 2
4939: RNCC: 5 | RNVC: 2
4939: RNCC: D | RNVC: 9

11 Nov 1986

3040-01-244-3490
Shouldered Shaft

012443490
1975682: RNCC: 3 | RNVC: 2
1975608 PIECE 7: RNCC: 5 | RNVC: 9

11 Nov 1986

3040-01-226-7442
Drum Friction Clutc *

012267442
407923: RNCC: 3 | RNVC: 2

21 Feb 1986

3040-01-243-9770
Push-Pull Control Assembly

012439770
1291-142: RNCC: 3 | RNVC: 2

5 Nov 1986

3040-01-243-9042
Shouldered Shaft

012439042
212F238: RNCC: 3 | RNVC: 2

2 Nov 1986

3040-01-243-7862
Control Cam

012437862
707214-11: RNCC: 3 | RNVC: 2
707214-11: RNCC: 5 | RNVC: 2

31 Oct 1986

3040-01-243-7861
Control Cam

012437861
707213-5: RNCC: 3 | RNVC: 2
707213-5: RNCC: 3 | RNVC: 9

31 Oct 1986

3040-01-243-7715
Shouldered Shaft

012437715
7360 029 307: RNCC: 3 | RNVC: 2
7360 029 307: RNCC: 5 | RNVC: 2
406 462 00 12: RNCC: 5 | RNVC: 2
406 462 00 12: RNCC: 5 | RNVC: 9

31 Oct 1986

3040-01-225-1068
Remote Control Lever

012251068
15590123: RNCC: 3 | RNVC: 2
15590123: RNCC: 5 | RNVC: 9

27 Jan 1986

3040-01-243-0974
Manual Control Lever

012430974
308-25-3512: RNCC: 3 | RNVC: 2

22 Oct 1986

3040-01-223-8611
Helical Gearshaft

012238611
E3879-5: RNCC: 3 | RNVC: 2

8 Jan 1986

3040-01-242-4842
Shaft Retaining Plate

012424842
KIT2434: RNCC: 3 | RNVC: 2
008402T: RNCC: 5 | RNVC: 2
A-3270-G-163: RNCC: 5 | RNVC: 9
A3270G163: RNCC: 5 | RNVC: 9
498 072C1: RNCC: 5 | RNVC: 9
3270-G-163: RNCC: E | RNVC: 8
1671 856C91: RNCC: E | RNVC: 8

12 Oct 1986

3040-01-242-3090
Rigid Connecting Link

012423090
000 824 34 05: RNCC: 3 | RNVC: 2
SWHV101.457: RNCC: 5 | RNVC: 2
000 824 34 05: RNCC: 5 | RNVC: 2
000 824 34 05: RNCC: 5 | RNVC: 9

9 Oct 1986

3040-01-242-3055
Linear Actuating Cylinder Assembly

012423055
694951: RNCC: 3 | RNVC: 2
694951: RNCC: 5 | RNVC: 2
551021-1: RNCC: C | RNVC: 1

9 Oct 1986

3040-01-242-2599
Mechanical Drive Housing

012422599
A7331A: RNCC: 3 | RNVC: 2

9 Oct 1986

3040-01-242-1444
Remote Control Lever

012421444
P42919-2: RNCC: 3 | RNVC: 9

7 Oct 1986

3040-01-241-8682
Linear Actuating Cylinder

012418682
71-70: RNCC: 3 | RNVC: 9
71-70: RNCC: 5 | RNVC: 9
5196194: RNCC: C | RNVC: 1
74654: RNCC: C | RNVC: 1

3 Oct 1986

3040-01-241-6851
Linear Actuating Cylinder

012416851
DS-841665: RNCC: 3 | RNVC: 2
DS-841665: RNCC: 5 | RNVC: 2
841665: RNCC: 5 | RNVC: 9
842717: RNCC: D | RNVC: 9

30 Sep 1986

3040-01-241-6644
Straight Shaft

012416644
2CP179: RNCC: 3 | RNVC: 2
XA-SO1686: RNCC: 5 | RNVC: 9
XA-SO1957 DETAIL 15: RNCC: 5 | RNVC: 9
2CP179: RNCC: 5 | RNVC: 9
XA-SO1957: RNCC: D | RNVC: 9

30 Sep 1986

3040-01-241-5618
Linear Actuating Cylinder Piston Rod

012415618
G110166: RNCC: 3 | RNVC: 2
G34775: RNCC: 5 | RNVC: 9
G34775: RNCC: 5 | RNVC: 9

27 Sep 1986

3040-01-241-5615
Remote Control Lever

012415615
8249-53: RNCC: 3 | RNVC: 2
8249-6 ITEM 33: RNCC: 5 | RNVC: 2
8249-6: RNCC: D | RNVC: 9

27 Sep 1986

3040-01-241-5616
Remote Control Lever

012415616
102477: RNCC: 3 | RNVC: 2

27 Sep 1986

3040-01-241-5617
Pawl

012415617
1353AS170-1: RNCC: 3 | RNVC: 2
1353AS170-1: RNCC: 5 | RNVC: 2
1353AS170-1: RNCC: 5 | RNVC: 9
10106980: RNCC: 6 | RNVC: 9
1353AS170: RNCC: D | RNVC: 9

27 Sep 1986

3040-01-241-5611
Push-Pull Control Assembly

012415611
8249-28: RNCC: 3 | RNVC: 2
8249-5 ITEM 9: RNCC: 5 | RNVC: 2
8249-5: RNCC: D | RNVC: 9

27 Sep 1986

3040-01-241-5609
Nonvehicular Propeller Shaft

012415609
6-60-189-34 22/32: RNCC: 3 | RNVC: 2
6-60-189: RNCC: 5 | RNVC: 9

27 Sep 1986

3040-01-241-4313
Rigid Connecting Link

012414313
3660557-501: RNCC: 3 | RNVC: 2
3660557: RNCC: D | RNVC: 9

25 Sep 1986

3040-01-222-4716
Shaft Retaining Plate

012224716
324282: RNCC: 3 | RNVC: 2
5123360100: RNCC: 5 | RNVC: 2
5123360100: RNCC: 5 | RNVC: 9
324282: RNCC: 5 | RNVC: 9

12 Dec 1985

3040-01-241-3234
Shaft Retaining Plate

012413234
D90970: RNCC: 3 | RNVC: 2
D90970: RNCC: 5 | RNVC: 2

24 Sep 1986

3040-01-241-3112
Manual Control Lever

012413112
8249-35: RNCC: 3 | RNVC: 2
8249-6: RNCC: D | RNVC: 9

24 Sep 1986

3040-01-241-3095
Mechanical Drive Housing

012413095
D123189: RNCC: 3 | RNVC: 2
D123189: RNCC: 5 | RNVC: 2

24 Sep 1986

3040-01-241-1676
Manual Control Lever

012411676
U10897: RNCC: 3 | RNVC: 2
U10897: RNCC: 5 | RNVC: 2
U10897: RNCC: 5 | RNVC: 9

23 Sep 1986

3040-01-240-8562
Manual Control Lever

012408562
D91102: RNCC: 3 | RNVC: 2

19 Sep 1986

3040-01-240-8564
Manual Control Lever

012408564
D79530: RNCC: 3 | RNVC: 2
D79530: RNCC: 5 | RNVC: 2

19 Sep 1986

3040-01-240-3758
Remote Control Lever

012403758
707-071-1: RNCC: 3 | RNVC: 2

12 Sep 1986

3040-01-240-3459
Nonrotating Shaft Eye Bracket

012403459
7002548: RNCC: 3 | RNVC: 2
7002548: RNCC: 5 | RNVC: 2

12 Sep 1986

3040-01-240-3119
Linear Actuating Cylinder Piston Rod

012403119
G103351: RNCC: 3 | RNVC: 2
G103351: RNCC: 5 | RNVC: 2

12 Sep 1986

3040-01-240-2829
Linear Actuating Cylinder

012402829
G109142: RNCC: 3 | RNVC: 2
G109142: RNCC: 5 | RNVC: 2

11 Sep 1986

3040-01-240-2798
Mechanical Drive Housing

012402798
417 427 00 81: RNCC: 3 | RNVC: 2
417 427 00 81: RNCC: 5 | RNVC: 2
406 427 04 81: RNCC: 5 | RNVC: 9
406 427 04 81: RNCC: 5 | RNVC: 9
417 427 00 81: RNCC: 5 | RNVC: 9

11 Sep 1986

3040-01-240-2050
Rigid Connecting Link

012402050
677-02113-10: RNCC: 3 | RNVC: 2
677-02113-10: RNCC: 5 | RNVC: 2

10 Sep 1986

3040-01-240-2048
Rigid Connecting Link

012402048
677-01075-10: RNCC: 3 | RNVC: 2
677-01075-10: RNCC: 5 | RNVC: 2

10 Sep 1986

3040-01-240-2049
Rigid Connecting Link

012402049
677-02114-20: RNCC: 3 | RNVC: 2
677-02114-20: RNCC: 5 | RNVC: 2

10 Sep 1986

3040-01-240-1961
Shouldered Shaft

012401961
034-41337: RNCC: 3 | RNVC: 2
034-41337-X: RNCC: C | RNVC: 1

10 Sep 1986

3040-01-239-8902
Extension Shaft

012398902
845001A0093: RNCC: 3 | RNVC: 2
016120: RNCC: 5 | RNVC: 9

5 Sep 1986

3040-01-239-7677
Push-Pull Control Assembly

012397677
30Z188: RNCC: 3 | RNVC: 2
WL-465-66-515-11: RNCC: 5 | RNVC: 9

4 Sep 1986

3040-01-239-7604
Linear Actuating Cylinder Piston

012397604
G100642: RNCC: 3 | RNVC: 2
G100642: RNCC: 5 | RNVC: 9

4 Sep 1986

3040-01-239-7605
Linear Actuating Cylinder Piston Rod

012397605
G33885: RNCC: 3 | RNVC: 2
G33885: RNCC: 5 | RNVC: 2

4 Sep 1986

3040-01-239-5855
Straight Shaft

012395855
384-1518-00: RNCC: 3 | RNVC: 2

1 Sep 1986

3040-01-239-4228
Shouldered Shaft

012394228
52550201: RNCC: 3 | RNVC: 2
525502-1: RNCC: C | RNVC: 1

29 Aug 1986

3040-01-238-8823
Rotating Shaft Eye Bracket

012388823
11650218: RNCC: 3 | RNVC: 2

21 Aug 1986

3040-01-238-5677
Rotating Shaft Eye Bracket

012385677
12313337-2: RNCC: 3 | RNVC: 2

16 Aug 1986

3040-01-238-4276
Rigid Connecting Link

012384276
500157: RNCC: 3 | RNVC: 2
500157: RNCC: 5 | RNVC: 9

14 Aug 1986

3040-01-218-0355
Push-Pull Control Assembly

012180355
79V06-3-72-005: RNCC: 3 | RNVC: 2
3010-075-1829 AND 041884-01B: RNCC: 3 | RNVC: 2
33072-72-49005-1-1: RNCC: 5 | RNVC: 2
B048711-003-0720.0W/B041884-01B: RNCC: 5 | RNVC: 9
79V06-3-72-005: RNCC: 5 | RNVC: 9
B048711-003-0720.0W/B041884-01B: RNCC: 5 | RNVC: 9
281002: RNCC: 5 | RNVC: 9
X07523550: RNCC: C | RNVC: 1

6 Oct 1985

3040-01-238-2737
Rigid Connecting Link

012382737
ZAJ9054002: RNCC: 3 | RNVC: 2
472271C1: RNCC: 5 | RNVC: 9

13 Aug 1986

3040-01-238-2057
Extension Shaft

012382057
384-1540-00: RNCC: 3 | RNVC: 2

13 Aug 1986

3040-01-238-0804
Shaft Collar

012380804
44-448-3 ITEM 4: RNCC: 3 | RNVC: 2
44-448-3 ITEM 4: RNCC: 5 | RNVC: 2
132: RNCC: 5 | RNVC: 2

9 Aug 1986

3040-01-237-7081
Bell Crank

012377081
84803: RNCC: 3 | RNVC: 2

5 Aug 1986

3040-01-237-7015
Spur Gearshaft

012377015
406 264 84 20: RNCC: 3 | RNVC: 2
406 264 84 20: RNCC: 5 | RNVC: 2

5 Aug 1986

3040-01-216-5336
Shaft Collar

012165336
2083939-0001: RNCC: 3 | RNVC: 2

12 Sep 1985

3040-01-237-2864
Linear Actuating Cylinder Piston

012372864
501926: RNCC: 3 | RNVC: 2
501926: RNCC: 5 | RNVC: 9
501926: RNCC: 5 | RNVC: 9

29 Jul 1986

3040-01-237-2086
Pawl

012372086
A-20162: RNCC: 3 | RNVC: 2

26 Jul 1986

3040-01-237-0355
Manual Control Lever

012370355
AT32963: RNCC: 3 | RNVC: 2
AT32963: RNCC: 5 | RNVC: 9

24 Jul 1986

3040-01-237-0183
Filler Opening Cap

012370183
4412670006: RNCC: 3 | RNVC: 2
4412670006: RNCC: 5 | RNVC: 2
4412670006: RNCC: 5 | RNVC: 9

24 Jul 1986

3040-01-236-9403
Breather

012369403
BF-2012: RNCC: 3 | RNVC: 2

24 Jul 1986

3040-01-236-7306
Shaft Retaining Plate

012367306
322 076 02 35: RNCC: 3 | RNVC: 2
322 076 02 35: RNCC: 5 | RNVC: 2
322 076 02 35: RNCC: 5 | RNVC: 9

22 Jul 1986

3040-01-236-7213
Straight Shaft

012367213
T149083: RNCC: 3 | RNVC: 2
T38049: RNCC: 5 | RNVC: 9
T149803: RNCC: 5 | RNVC: 9

22 Jul 1986

3040-01-236-6610
Extension Shaft

012366610
C87558: RNCC: 3 | RNVC: 2
C87558: RNCC: 5 | RNVC: 9

21 Jul 1986

3040-01-236-4756
Linear Actuating Cylinder Piston

012364756
T34319: RNCC: 3 | RNVC: 2
T34319: RNCC: 5 | RNVC: 9

17 Jul 1986

3040-01-236-3184
Flexible Casing End Fitting

012363184
QM418889: RNCC: 3 | RNVC: 2

16 Jul 1986

3040-01-214-0032
Shouldered Shaft

012140032
66-2592: RNCC: 3 | RNVC: 2

4 Aug 1985

3040-01-235-5766
Remote Control Lever

012355766
1325230W: RNCC: 3 | RNVC: 2
1325230W: RNCC: 5 | RNVC: 9

2 Jul 1986

3040-01-235-5720
Spur Gearshaft

012355720
2B-E-301: RNCC: 3 | RNVC: 2
2B-E-301: RNCC: 5 | RNVC: 9
626846: RNCC: 5 | RNVC: 9
626845: RNCC: D | RNVC: 9

2 Jul 1986

3040-01-235-5668
Straight Shaft

012355668
125685B: RNCC: 3 | RNVC: 2
125685B: RNCC: 5 | RNVC: 9

2 Jul 1986

3040-01-235-3671
Manual Control Lever

012353671
F-11647-1: RNCC: 3 | RNVC: 9

28 Jun 1986

3040-01-235-1505
Mechanical Drive Housing

012351505
3SH8: RNCC: 3 | RNVC: 2
0921652: RNCC: 5 | RNVC: 2
3SH8: RNCC: 5 | RNVC: 9

25 Jun 1986

3040-01-235-0447
Rigid Connecting Link

012350447
12344801: RNCC: 3 | RNVC: 2

24 Jun 1986

3040-01-235-0242
Extension Shaft

012350242
11784550: RNCC: 3 | RNVC: 2

24 Jun 1986

3040-01-234-8892
Remote Control Lever

012348892
10947463-1: RNCC: 3 | RNVC: 2
10947463: RNCC: D | RNVC: 9

21 Jun 1986

3040-01-234-7374
Linear Actuating Cylinder Cap

012347374
2AA873: RNCC: 3 | RNVC: 2
2AA873: RNCC: 5 | RNVC: 9
19023-507: RNCC: 5 | RNVC: 9
19023: RNCC: D | RNVC: 9

19 Jun 1986

3040-01-234-3439
Link Assembly Housing

012343439
1339770W: RNCC: 3 | RNVC: 2
1339770W: RNCC: 5 | RNVC: 9

13 Jun 1986

3040-01-206-8501
Shaft Collar

012068501
02331-1863: RNCC: 3 | RNVC: 2
02331-1863: RNCC: 5 | RNVC: 9

23 Apr 1985

3040-01-234-2296
Rigid Connecting Link

012342296
5006580: RNCC: 3 | RNVC: 2

11 Jun 1986

3040-01-233-7368
Linear Actuating Cylinder Assembly

012337368
C3H-140-90-1408-KZ8A-11: RNCC: 3 | RNVC: 2
130982: RNCC: 5 | RNVC: 1
C3H-140-90-1408-KZ8A-11VM: RNCC: 5 | RNVC: 2
130982VM: RNCC: 5 | RNVC: 2

1 Jun 1986

3040-01-233-4897
Mechanical Drive Housing

012334897
1446050: RNCC: 3 | RNVC: 2
1446050: RNCC: 5 | RNVC: 9

30 May 1986

3040-01-233-4818
Shouldered Shaft

012334818
1854433: RNCC: 3 | RNVC: 2

30 May 1986

3040-01-233-3506
Remote Control Lever

012333506
126126CW: RNCC: 3 | RNVC: 2
126126CW: RNCC: 5 | RNVC: 9

29 May 1986

3040-01-233-2747
Rigid Connecting Link

012332747
16P286-839: RNCC: 3 | RNVC: 2
3040PL0667891: RNCC: 6 | RNVC: 9
16P286-839: RNCC: 8 | RNVC: 2

29 May 1986

3040-01-233-1843
Shouldered Shaft

012331843
83-14783: RNCC: 3 | RNVC: 2
83-14783: RNCC: 3 | RNVC: 2
83-14783: RNCC: 5 | RNVC: 2
83-14783: RNCC: 5 | RNVC: 9
83-14783: RNCC: 5 | RNVC: 9

28 May 1986

3040-01-233-1774
Bell Crank

012331774
126125DU: RNCC: 3 | RNVC: 2
126125DU: RNCC: 5 | RNVC: 9

27 May 1986

3040-01-233-1750
Helical Gearshaft

012331750
1447940: RNCC: 3 | RNVC: 2
1447940: RNCC: 5 | RNVC: 9

27 May 1986

3040-01-233-1751
Mechanical Drive Housing

012331751
3SH105: RNCC: 3 | RNVC: 2
3S4105: RNCC: 3 | RNVC: 2
3SH105: RNCC: 5 | RNVC: 9
1131954: RNCC: 5 | RNVC: 9
3S4105: RNCC: 5 | RNVC: 9

27 May 1986

3040-01-233-0804
Straight Shaft

012330804
77747: RNCC: 3 | RNVC: 9

24 May 1986

3040-01-205-0102
Shouldered Shaft

012050102
737109: RNCC: 3 | RNVC: 2
737109: RNCC: 5 | RNVC: 9
737109: RNCC: 5 | RNVC: 9
737109: RNCC: C | RNVC: 1
737109: RNCC: C | RNVC: 1

4 Apr 1985

3040-01-232-9182
Bell Crank

012329182
65415-11251-044: RNCC: 3 | RNVC: 2
65415-11251-044: RNCC: 5 | RNVC: 2

21 May 1986

3040-01-232-8592
Shouldered Shaft

012328592
B5290A: RNCC: 3 | RNVC: 2

21 May 1986

3040-01-232-8423
Bell Crank

012328423
126119CW: RNCC: 3 | RNVC: 2
126119CW: RNCC: 5 | RNVC: 9

21 May 1986

3040-01-232-8419
Rotating Shaft Eye Bracket

012328419
77053: RNCC: 3 | RNVC: 2

21 May 1986

3040-01-232-8239
Bevel Gearshaft

012328239
86576: RNCC: 3 | RNVC: 2

21 May 1986

3040-01-232-7777
Bevel Gearshaft

012327777
145D5305-3: RNCC: 3 | RNVC: 2
145D5305-2: RNCC: 5 | RNVC: 2

21 May 1986

3040-01-232-7241
Rotating Shaft Eye Bracket

012327241
1000288: RNCC: 3 | RNVC: 2
1000287: RNCC: D | RNVC: 9

20 May 1986

3040-01-232-7143
Linear Actuating Cylinder Piston Rod

012327143
N8092: RNCC: 3 | RNVC: 2
25-2743-3: RNCC: 3 | RNVC: 2

20 May 1986

3040-01-203-7558
Control Cam

012037558
5358B: RNCC: 3 | RNVC: 9
11Y-108-51: RNCC: 5 | RNVC: 9
5358B: RNCC: 5 | RNVC: 9
5358B: RNCC: C | RNVC: 1
5358B: RNCC: C | RNVC: 1
200113Z PIECE 325-4: RNCC: D | RNVC: 9

19 Mar 1985

3040-01-203-5515
Turbine Steam Shoe

012035515
756002: RNCC: 3 | RNVC: 9
ND-5087 PIECE 91: RNCC: 5 | RNVC: 9
ND-5087 LINE 36 PIECE 91: RNCC: 5 | RNVC: 9
756002: RNCC: 5 | RNVC: 9
756002: RNCC: C | RNVC: 1
91NH7119B: RNCC: C | RNVC: 1
756002: RNCC: C | RNVC: 1
ND-5087: RNCC: D | RNVC: 9

15 Mar 1985

3040-01-231-5097
Hydrau Support Assy

012315097
5543464: RNCC: 3 | RNVC: 2
5543464: RNCC: 5 | RNVC: 2
5543464: RNCC: 5 | RNVC: 2

29 Apr 1986

3040-01-231-5101
Manual Control Lever

012315101
174-8068: RNCC: 3 | RNVC: 9

29 Apr 1986

3040-01-202-7649
Remote Control Lever

012027649
451008: RNCC: 3 | RNVC: 9
NH-7477 PIECE 1008: RNCC: 5 | RNVC: 9
1008NC-6654: RNCC: 5 | RNVC: 9
1008NC-6654: RNCC: 5 | RNVC: 9
NH-7477 PIECE 1008: RNCC: 5 | RNVC: 9
451008: RNCC: C | RNVC: 1
NH-7477 PIECE 1008: RNCC: C | RNVC: 1
451008: RNCC: C | RNVC: 1
NH-7477 PIECE 1008: RNCC: C | RNVC: 1
451008: RNCC: C | RNVC: 1

6 Mar 1985

3040-01-230-8911
Linear Actuating Cylinder Piston

012308911
31773162: RNCC: 3 | RNVC: 2
31773162: RNCC: 5 | RNVC: 9

19 Apr 1986

3040-01-201-6166
Differential Gear Unit

012016166
33-203-443: RNCC: 3 | RNVC: 2
132848: RNCC: 7 | RNVC: 2

20 Feb 1985

3040-01-230-4266
Shouldered Shaft

012304266
42132E329: RNCC: 3 | RNVC: 2
A-350-11928: RNCC: 3 | RNVC: 2
42132E329: RNCC: 3 | RNVC: 9
A-350-11928: RNCC: 5 | RNVC: 9

12 Apr 1986

3040-01-230-3875
Spur Gearshaft

012303875
6L2950: RNCC: 3 | RNVC: 2

12 Apr 1986

3040-01-230-3347
Linear Actuating Cylinder Piston

012303347
355283: RNCC: 3 | RNVC: 9

12 Apr 1986

3040-01-230-1422
Push-Pull Control Assembly

012301422
19878: RNCC: 3 | RNVC: 9

9 Apr 1986

3040-01-230-0549
Brake Backing Plate

012300549
41-311-75: RNCC: 3 | RNVC: 2

9 Apr 1986

3040-01-230-0212
Mechanical Drive Housing

012300212
12273799: RNCC: 3 | RNVC: 2

9 Apr 1986

3040-01-230-0210
Detent Plate

012300210
12344691: RNCC: 3 | RNVC: 2

9 Apr 1986

3040-01-229-7412
Linear Actuating Cylinder Piston

012297412
255075: RNCC: 3 | RNVC: 2
255075: RNCC: 3 | RNVC: 9
255075: RNCC: 5 | RNVC: 9

4 Apr 1986

3040-01-199-4216
Rigid Connecting Link

011994216
91126-001: RNCC: 3 | RNVC: 9
LA91126: RNCC: 5 | RNVC: 9
LA91126: RNCC: 5 | RNVC: 9
91126-001: RNCC: C | RNVC: 1
LA-91126: RNCC: C | RNVC: 1
91126-001: RNCC: C | RNVC: 1

22 Jan 1985

3040-01-229-1907
Rigid Connecting Link

012291907
0382370: RNCC: 3 | RNVC: 9
382370: RNCC: 5 | RNVC: 9
382370: RNCC: 5 | RNVC: 9
0382370: RNCC: 5 | RNVC: 9
0382370: RNCC: 5 | RNVC: 9
382370: RNCC: 5 | RNVC: 9
382370: RNCC: C | RNVC: 1
0382370: RNCC: C | RNVC: 1

27 Mar 1986

3040-01-229-1528
Push-Pull Control Assembly

012291528
97-505: RNCC: 3 | RNVC: 2
097-121-5: RNCC: 5 | RNVC: 9
97-121: RNCC: 5 | RNVC: 9

26 Mar 1986

3040-01-229-1348
Manual Control Lever

012291348
41-311-72: RNCC: 3 | RNVC: 2

26 Mar 1986

3040-01-228-9272
Manual Control Lever

012289272
012-0870-00-0: RNCC: 3 | RNVC: 2

22 Mar 1986

3040-01-228-9263
Control Cam

012289263
012-0920-00-0: RNCC: 3 | RNVC: 2
012-0920-01-0: RNCC: C | RNVC: 1

22 Mar 1986

3040-01-228-8994
Manual Control Lever

012288994
329418: RNCC: 3 | RNVC: 2
0329418: RNCC: 3 | RNVC: 9
329418: RNCC: 5 | RNVC: 9
0329418: RNCC: 5 | RNVC: 9
0329418: RNCC: 5 | RNVC: 9
329418: RNCC: 5 | RNVC: 9
329418: RNCC: 5 | RNVC: 9

22 Mar 1986

3040-01-228-8977
Spur Gearshaft

012288977
23007248: RNCC: 3 | RNVC: 2

22 Mar 1986

3040-01-228-8959
Shouldered Shaft

012288959
233624: RNCC: 3 | RNVC: 2

22 Mar 1986

3040-01-228-7253
Worm Shaft

012287253
TR1020: RNCC: 3 | RNVC: 2

20 Mar 1986

3040-01-228-7009
Manual Control Lever

012287009
261511: RNCC: 3 | RNVC: 2

20 Mar 1986

3040-01-228-5717
Nonvehicular Propeller Shaft

012285717
8HA222: RNCC: 3 | RNVC: 2
202991-0311: RNCC: 5 | RNVC: 2
8HA222: RNCC: 5 | RNVC: 9
1386150: RNCC: 5 | RNVC: 9

18 Mar 1986

3040-01-228-1139
Manual Control Lever

012281139
512-0300-00-0: RNCC: 3 | RNVC: 2

14 Mar 1986

3040-01-228-0981
Rigid Connecting Link

012280981
CA200042: RNCC: 3 | RNVC: 2
CA200042: RNCC: 5 | RNVC: 2
1G3694: RNCC: 5 | RNVC: 9

14 Mar 1986

3040-01-227-7602
Shouldered Shaft

012277602
350136: RNCC: 3 | RNVC: 2
350136: RNCC: 5 | RNVC: 9

7 Mar 1986

3040-01-227-7274
Control Cam

012277274
0329702: RNCC: 3 | RNVC: 9
329702: RNCC: 5 | RNVC: 9
329702: RNCC: 5 | RNVC: 9
0329702: RNCC: 5 | RNVC: 9
0329702: RNCC: 5 | RNVC: 9
329702: RNCC: 5 | RNVC: 9

7 Mar 1986

3040-01-227-6012
Mechanical Drive Housing

012276012
5433195: RNCC: 3 | RNVC: 2
5433195: RNCC: 3 | RNVC: 2
5433195: RNCC: 5 | RNVC: 2

6 Mar 1986

3040-01-227-5448
Linear Actuating Cylinder Assembly

012275448
377-4321-050: RNCC: 3 | RNVC: 2
4100-136009: RNCC: 5 | RNVC: 2
38U92 (4100-136009): RNCC: 5 | RNVC: 9

5 Mar 1986

3040-01-227-5254
Rigid Connecting Link

012275254
0329682: RNCC: 3 | RNVC: 9
329682: RNCC: 5 | RNVC: 9
329682: RNCC: 5 | RNVC: 9
0329682: RNCC: 5 | RNVC: 9
0329682: RNCC: 5 | RNVC: 9
329682: RNCC: 5 | RNVC: 9
0329682: RNCC: C | RNVC: 1
329682: RNCC: C | RNVC: 1

5 Mar 1986

3040-01-227-5255
Rigid Connecting Link

012275255
0329680: RNCC: 3 | RNVC: 9
329680: RNCC: 5 | RNVC: 9
329680: RNCC: 5 | RNVC: 9
0329680: RNCC: 5 | RNVC: 9
0329680: RNCC: 5 | RNVC: 9
329680: RNCC: 5 | RNVC: 9
0329680: RNCC: C | RNVC: 1
329680: RNCC: C | RNVC: 1

5 Mar 1986

3040-01-227-4750
Hydraulic Accumulator

012274750
810393: RNCC: 3 | RNVC: 2
30A-1-1/8WS: RNCC: 5 | RNVC: 2
A1052-200: RNCC: 5 | RNVC: 2
406-1071: RNCC: 7 | RNVC: 2

4 Mar 1986

3040-01-227-4694
Control Shaft

012274694
3227-3021-0: RNCC: 3 | RNVC: 2
2CC340: RNCC: 5 | RNVC: 2
01001210: RNCC: 5 | RNVC: 9
2CC340: RNCC: 5 | RNVC: 9

3 Mar 1986

3040-01-227-4684
Shouldered Shaft

012274684
1411550: RNCC: 3 | RNVC: 2
1411550: RNCC: 5 | RNVC: 9

3 Mar 1986

3040-01-227-4267
Spur Gearshaft

012274267
1852870: RNCC: 3 | RNVC: 2

3 Mar 1986

3040-01-227-2158
Rotating Shaft Eye Bracket

012272158
5942903-001: RNCC: 3 | RNVC: 2
5942903: RNCC: D | RNVC: 9

1 Mar 1986

3040-01-227-2159
Push-Pull Control Assembly

012272159
7-246-000424: RNCC: 3 | RNVC: 2

1 Mar 1986

3040-01-227-1230
Push-Pull Control Assembly

012271230
31003130: RNCC: 3 | RNVC: 2
V3130: RNCC: 3 | RNVC: 9

28 Feb 1986

3040-01-227-1233
Pawl

012271233
S101-25-2991: RNCC: 3 | RNVC: 2

28 Feb 1986

3040-01-227-1114
Straight Shaft

012271114
1437370: RNCC: 3 | RNVC: 2
1437370: RNCC: 5 | RNVC: 9

28 Feb 1986

3040-01-195-7502
Linear Actuating Cylinder Piston Rod

011957502
673077: RNCC: 3 | RNVC: 9
B-3534: RNCC: 5 | RNVC: 9
673077: RNCC: 5 | RNVC: 9
673077: RNCC: C | RNVC: 1
673077: RNCC: C | RNVC: 1

1 Dec 1984

3040-01-226-5437
Bell Crank

012265437
107C2614-16: RNCC: 3 | RNVC: 2

19 Feb 1986

3040-01-226-4679
Front Housing

012264679
1540618A04S: RNCC: 3 | RNVC: 2
114-9: RNCC: 5 | RNVC: 2
1540618A04: RNCC: 5 | RNVC: 9
14-46: RNCC: 5 | RNVC: 9

19 Feb 1986

3040-01-226-3376
Mechanical Drive Housing

012263376
A3897L818: RNCC: 3 | RNVC: 9

15 Feb 1986

3040-01-226-0550
Straight Shaft

012260550
12321935: RNCC: 3 | RNVC: 2

12 Feb 1986

3040-01-225-9493
Linear Actuating Cylinder Assembly

012259493
R806: RNCC: 3 | RNVC: 1
R59-19B: RNCC: 3 | RNVC: 2
R59-19: RNCC: 5 | RNVC: 9

9 Feb 1986

3040-01-194-1652
Shaft Collar

011941652
460906: RNCC: 3 | RNVC: 9

10 Nov 1984

3040-01-225-7298
Brake Disc

012257298
B44195: RNCC: 3 | RNVC: 2
M56519 PIECE 36: RNCC: 5 | RNVC: 2
D44241 PIECE 36: RNCC: C | RNVC: 1

6 Feb 1986

3040-01-225-7040
Push-Pull Control Assembly

012257040
142-029-3: RNCC: 3 | RNVC: 2
22A2856: RNCC: 5 | RNVC: 2
22A2699: RNCC: 5 | RNVC: 9
142-029-3: RNCC: 5 | RNVC: 9

6 Feb 1986

3040-01-225-6169
Spur Gearshaft

012256169
433631: RNCC: 3 | RNVC: 2
2CX146: RNCC: 5 | RNVC: 2
2CX146: RNCC: 5 | RNVC: 9

5 Feb 1986

3040-01-225-5932
Shoe Type Brake

012255932
B-4940: RNCC: 3 | RNVC: 2
RC-4285-H PIECE 25: RNCC: 5 | RNVC: 2

4 Feb 1986

3040-01-225-2489
Hydraulic Accumulator

012252489
813290: RNCC: 3 | RNVC: 2
30A-C150WS: RNCC: 5 | RNVC: 2
A69503-400: RNCC: 5 | RNVC: 2
406-1072: RNCC: 7 | RNVC: 2

30 Jan 1986

3040-01-225-2304
Brake Disc

012252304
EE5309: RNCC: 3 | RNVC: 2

30 Jan 1986

3040-01-225-2134
Extension Shaft

012252134
384-0341-00: RNCC: 3 | RNVC: 2

30 Jan 1986

3040-01-225-2133
Extension Shaft

012252133
384-1354-00: RNCC: 3 | RNVC: 2

30 Jan 1986

3040-01-225-1446
Straight Shaft

012251446
6138943-1: RNCC: 3 | RNVC: 2
4188711-4: RNCC: 5 | RNVC: 9

29 Jan 1986

3040-01-225-1070
Shaft Retaining Plate

012251070
2AN604: RNCC: 3 | RNVC: 2
95-04-117-01: RNCC: 3 | RNVC: 9
2AN604: RNCC: 5 | RNVC: 9
3031: RNCC: D | RNVC: 9

27 Jan 1986

3040-01-225-1061
Rotating Shaft Eye Bracket

012251061
5942903-002: RNCC: 3 | RNVC: 2
5942903: RNCC: D | RNVC: 9

27 Jan 1986

3040-01-225-1033
Manual Control Lever

012251033
14081915: RNCC: 3 | RNVC: 2
14081915: RNCC: 5 | RNVC: 9

27 Jan 1986

3040-01-225-0989
Shouldered Shaft

012250989
13222E0083-1: RNCC: 3 | RNVC: 2
13222E0083: RNCC: D | RNVC: 9

27 Jan 1986

3040-01-224-8813
Mechanical Drive Housing

012248813
42357-61: RNCC: 3 | RNVC: 2

24 Jan 1986

3040-01-224-7337
Shouldered Shaft

012247337
8251979: RNCC: 3 | RNVC: 9

22 Jan 1986

3040-01-224-6331
Body Hub

012246331
B44572: RNCC: 3 | RNVC: 2

17 Jan 1986

3040-01-224-6332
Shaft Retaining Plate

012246332
675412C2: RNCC: 3 | RNVC: 2
675412C1: RNCC: 3 | RNVC: 9

17 Jan 1986

3040-01-224-6299
Brake Disc

012246299
B44194: RNCC: 3 | RNVC: 2

17 Jan 1986

3040-01-224-5925
Bell Crank

012245925
65-6793-8: RNCC: 3 | RNVC: 2

17 Jan 1986

3040-01-224-5099
Shouldered Shaft

012245099
531093: RNCC: 3 | RNVC: 2

17 Jan 1986

3040-01-191-8809
Manual Control Lever

011918809
LB118273: RNCC: 3 | RNVC: 9
LB118273: RNCC: 5 | RNVC: 9
121301-10.34: RNCC: 5 | RNVC: 9
121301-10.34: RNCC: 5 | RNVC: 9
LB -118273: RNCC: C | RNVC: 1
LB118273: RNCC: C | RNVC: 1
121301-10.34: RNCC: C | RNVC: 1
LB118273: RNCC: C | RNVC: 1
121301-10.34: RNCC: C | RNVC: 1

13 Oct 1984

3040-01-191-8808
Manual Control Lever

011918808
91131-001: RNCC: 3 | RNVC: 9
121301-10.28: RNCC: 5 | RNVC: 9
LB91131: RNCC: 5 | RNVC: 9
LB91131: RNCC: 5 | RNVC: 9
121301-10.28: RNCC: 5 | RNVC: 9
91131-001: RNCC: C | RNVC: 1
LB-91131: RNCC: C | RNVC: 1
91131-001: RNCC: C | RNVC: 1

13 Oct 1984

3040-01-191-8789
Straight Shaft

011918789
91383-001: RNCC: 3 | RNVC: 2
121301-21.15: RNCC: 5 | RNVC: 9
LB91383: RNCC: 5 | RNVC: 9
91383-001: RNCC: 5 | RNVC: 9
121301-21.15: RNCC: 5 | RNVC: 9
LB91383: RNCC: 5 | RNVC: 9
LB-91383: RNCC: C | RNVC: 1
91383-001: RNCC: C | RNVC: 1

13 Oct 1984

3040-01-191-8235
Linear Actuating Cylinder Piston

011918235
LB91140: RNCC: 3 | RNVC: 9
121301-8.10: RNCC: 5 | RNVC: 9
LB91140: RNCC: 5 | RNVC: 9
121301-8.10: RNCC: 5 | RNVC: 9
121301-8.10: RNCC: C | RNVC: 1
LB91140: RNCC: C | RNVC: 1
LB-91140: RNCC: C | RNVC: 1
LB91140: RNCC: C | RNVC: 1
121301-8.10: RNCC: C | RNVC: 1

12 Oct 1984

3040-01-191-8217
Linear Actuating Cylinder Assembly

011918217
91136-701: RNCC: 3 | RNVC: 9
LD91136: RNCC: 5 | RNVC: 9
121301-8.1: RNCC: 5 | RNVC: 9
121301-8.1: RNCC: 5 | RNVC: 9
LD91136: RNCC: 5 | RNVC: 9
LD-91136: RNCC: C | RNVC: 1
91136-701: RNCC: C | RNVC: 1
91136-701: RNCC: C | RNVC: 1

12 Oct 1984

3040-01-191-8191
Rigid Connecting Link

011918191
LA91406: RNCC: 3 | RNVC: 9
LA91406: RNCC: 5 | RNVC: 9
121301-7.55: RNCC: 5 | RNVC: 9
121301-7.55: RNCC: 5 | RNVC: 9
LA91406: RNCC: C | RNVC: 1
121301-7.55: RNCC: C | RNVC: 1
LA-91406: RNCC: C | RNVC: 1
121301-7.55: RNCC: C | RNVC: 1
LA91406: RNCC: C | RNVC: 1

12 Oct 1984

3040-01-224-3961
Control Cam

012243961
060169: RNCC: 3 | RNVC: 9

15 Jan 1986

3040-01-224-3839
Drive Shaft

012243839
1034038-2: RNCC: 3 | RNVC: 2
1034038-2: RNCC: 5 | RNVC: 2
1034038-2: RNCC: 5 | RNVC: 9

15 Jan 1986

3040-01-224-3076
Shouldered Shaft

012243076
C0105050800: RNCC: 3 | RNVC: 9
105-0508: RNCC: 5 | RNVC: 9

15 Jan 1986

3040-01-191-6251
Linear Actuating Cylinder Piston Rod

011916251
91143-001: RNCC: 3 | RNVC: 9
121301-8.13: RNCC: 5 | RNVC: 9
LB91143: RNCC: 5 | RNVC: 9
121301-8.13: RNCC: 5 | RNVC: 9
LB91143: RNCC: 5 | RNVC: 9
91143-001: RNCC: C | RNVC: 1
LB-91143: RNCC: C | RNVC: 1
91143-001: RNCC: C | RNVC: 1

11 Oct 1984

3040-01-224-2260
Rigid Connecting Link

012242260
7-311511181-43: RNCC: 3 | RNVC: 2
7-311511181-43: RNCC: 3 | RNVC: 9
7-311511181-39: RNCC: 5 | RNVC: 9

14 Jan 1986

3040-01-223-8784
Rotating Shaft Eye Bracket

012238784
12313337-1: RNCC: 3 | RNVC: 2
12313337: RNCC: D | RNVC: 9

9 Jan 1986

3040-01-223-8764
Manual Control Lever

012238764
2361246: RNCC: 3 | RNVC: 9
2361246: RNCC: C | RNVC: 1

9 Jan 1986

3040-01-223-8757
Control Cam

012238757
C0103075000: RNCC: 3 | RNVC: 2
103-0750: RNCC: 5 | RNVC: 9

9 Jan 1986

3040-01-223-7891
Remote Control Lever

012237891
13495-2: RNCC: 3 | RNVC: 2

6 Jan 1986

3040-01-223-5140
Shouldered Shaft

012235140
171861: RNCC: 3 | RNVC: 9
171861: RNCC: 5 | RNVC: 9

30 Dec 1985

3040-01-223-4999
Spur Gearshaft

012234999
32149: RNCC: 3 | RNVC: 2

30 Dec 1985

3040-01-223-3448
Remote Control Lever

012233448
13226E0434: RNCC: 3 | RNVC: 2

28 Dec 1985

3040-01-223-0741
Nonvehicular Propeller Shaft

012230741
5-3-2141X: RNCC: 3 | RNVC: 9
16DS322: RNCC: 5 | RNVC: 2
16DS322: RNCC: 5 | RNVC: 9

21 Dec 1985

3040-01-222-8008
Linear Actuating Cylinder Piston

012228008
12321931: RNCC: 3 | RNVC: 2
12321931: RNCC: 5 | RNVC: 2

17 Dec 1985

3040-01-222-5900
Shouldered Shaft

012225900
12008184: RNCC: 3 | RNVC: 2

13 Dec 1985

3040-01-222-5320
Rigid Connecting Link

012225320
23615310: RNCC: 3 | RNVC: 2
23615310: RNCC: 3 | RNVC: 9
DRP-14777 REFERENCE 37: RNCC: 5 | RNVC: 2
DRP-14777 REFERENCE 37: RNCC: 5 | RNVC: 9

12 Dec 1985

3040-01-222-5110
Roller Shaft Assembly

012225110
BL-10455: RNCC: 3 | RNVC: 2

12 Dec 1985

3040-01-222-0958
Grooved Shaft

012220958
83278700: RNCC: 3 | RNVC: 9
83278700: RNCC: 5 | RNVC: 9
MPI83278700: RNCC: 5 | RNVC: 9

6 Dec 1985

3040-01-222-0391
Ball Joint

012220391
119758: RNCC: 3 | RNVC: 2
119758: RNCC: 5 | RNVC: 9

6 Dec 1985

3040-01-222-0190
Manual Control Lever

012220190
427125C1: RNCC: 3 | RNVC: 2

6 Dec 1985

3040-01-221-8924
Spur Gearshaft

012218924
2BC59: RNCC: 3 | RNVC: 2
2BC59: RNCC: 5 | RNVC: 9
2BC259: RNCC: 5 | RNVC: 9
418121: RNCC: 5 | RNVC: 9

5 Dec 1985

3040-01-221-7362
Shouldered Shaft

012217362
8176031: RNCC: 3 | RNVC: 2
8176031: RNCC: 3 | RNVC: 9

3 Dec 1985

3040-01-221-5749
Shaft Retaining Plate

012215749
HU09066741: RNCC: 3 | RNVC: 2
832851: RNCC: 5 | RNVC: 9
847333: RNCC: D | RNVC: 9

29 Nov 1985

3040-01-221-3478
Control Cam

012213478
1101: RNCC: 3 | RNVC: 2

28 Nov 1985

3040-01-221-1459
Shouldered Shaft

012211459
5541849: RNCC: 3 | RNVC: 2

24 Nov 1985

3040-01-221-0131
Speedometer-Tachometer Drive Adapter

012210131
777AT(.9615): RNCC: 3 | RNVC: 9
127-90004-26: RNCC: 5 | RNVC: 2
492744C91: RNCC: 5 | RNVC: 2
777F/.9615: RNCC: 5 | RNVC: 9

22 Nov 1985

3040-01-221-0115
Control Cam

012210115
BL-10488-2: RNCC: 3 | RNVC: 2

22 Nov 1985

3040-01-220-7641
Brake Disc

012207641
315F117: RNCC: 3 | RNVC: 2

19 Nov 1985

3040-01-220-6443
Shouldered Shaft

012206443
B20035D032: RNCC: 3 | RNVC: 2

16 Nov 1985

3040-01-220-6444
Shouldered Shaft

012206444
B20035D055: RNCC: 3 | RNVC: 2

16 Nov 1985

3040-01-220-5810
Linear Actuating Cylinder Piston

012205810
S640-56-5594: RNCC: 3 | RNVC: 2

16 Nov 1985

3040-01-220-5801
Mechanical Drive Housing

012205801
S000-25-1866: RNCC: 3 | RNVC: 2

16 Nov 1985

3040-01-220-5428
Shouldered Shaft

012205428
C20035D049: RNCC: 3 | RNVC: 2

16 Nov 1985

3040-01-220-2104
Hydraulic Winch Brake

012202104
02-540-062: RNCC: 3 | RNVC: 2
73079: RNCC: 3 | RNVC: 2
73079: RNCC: 5 | RNVC: 9

9 Nov 1985

3040-01-220-0564
Helical Gearshaft

012200564
7H981: RNCC: 3 | RNVC: 2
7H0981: RNCC: 5 | RNVC: 2

8 Nov 1985

3040-01-220-0124
Mechanical Drive Housing

012200124
12327892: RNCC: 3 | RNVC: 2

6 Nov 1985

3040-01-220-0104
Shaft Retaining Plate

012200104
1P7590: RNCC: 3 | RNVC: 2

6 Nov 1985

3040-01-219-9752
Flexible Shaft Assembly Core

012199752
341233C91: RNCC: 3 | RNVC: 2

5 Nov 1985

3040-01-219-7869
Linear Actuating Cylinder

012197869
HY-296: RNCC: 3 | RNVC: 2

2 Nov 1985

3040-01-219-6632
Control Cam

012196632
S000-25-2958: RNCC: 3 | RNVC: 2

31 Oct 1985

Load More Results