What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 151 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 151 of 300

3040-01-389-7814
Counterbalance Weight

013897814
236B2275-4: RNCC: 3 | RNVC: 9
511L33FA ITEM 33: RNCC: 5 | RNVC: 9
236B2275-4: RNCC: C | RNVC: 1
511L33FA ITEM 33: RNCC: C | RNVC: 1
511L33FA ITEM 33: RNCC: C | RNVC: 1
236B2275-4: RNCC: C | RNVC: 1

3 May 1994

3040-01-389-7781
Counterbalance Weight

013897781
236B2275-3: RNCC: 3 | RNVC: 9
511L333FA ITEM 32: RNCC: 5 | RNVC: 9
511L333FA ITEM 32: RNCC: C | RNVC: 1
236B2275-3: RNCC: C | RNVC: 1
236B2275-3: RNCC: C | RNVC: 1
511L333FA ITEM 32: RNCC: C | RNVC: 1
511L333FA: RNCC: D | RNVC: 9

3 May 1994

3040-01-351-3050
Linear Actuating Cylinder Assembly

013513050
B-1836-17: RNCC: 3 | RNVC: 2

4 Jan 1992

3040-01-351-1612
Disk Brake Shoe Set

013511612
NA7122R: RNCC: 3 | RNVC: 2
8983502200: RNCC: 5 | RNVC: 9

1 Jan 1992

3040-01-351-1615
Shouldered Shaft Assembly

013511615
033-71601: RNCC: 3 | RNVC: 2

1 Jan 1992

3040-01-388-3210
Straight Shaft

013883210
128C176AD-1: RNCC: 3 | RNVC: 9
128C176AD-1: RNCC: C | RNVC: 1
128C176AD-1: RNCC: C | RNVC: 1

28 Mar 1994

3040-01-350-6311
Shouldered Shaft

013506311
1W8410: RNCC: 3 | RNVC: 2

19 Dec 1991

3040-01-350-6310
Shouldered Shaft

013506310
1N3842: RNCC: 3 | RNVC: 2
9Y6910 IT 3: RNCC: 5 | RNVC: 2
9Y6910: RNCC: D | RNVC: 9

19 Dec 1991

3040-01-350-6306
Straight Shaft

013506306
4W4459 IT 1: RNCC: 3 | RNVC: 2
4W-4462: RNCC: C | RNVC: 1
4W4459: RNCC: D | RNVC: 9

19 Dec 1991

3040-01-350-3981
Pawl

013503981
0326670: RNCC: 3 | RNVC: 2
0326670: RNCC: 3 | RNVC: 9
326670: RNCC: 5 | RNVC: 2
326670: RNCC: 5 | RNVC: 9
326670: RNCC: 5 | RNVC: 9
0326670: RNCC: 5 | RNVC: 9
326670: RNCC: 5 | RNVC: 9
0326670: RNCC: 5 | RNVC: 9

14 Dec 1991

3040-01-349-7496
Nonrotating Shaft Eye Bracket

013497496
82-2740854-1: RNCC: 3 | RNVC: 2
82-2740854-1: RNCC: 5 | RNVC: 2

3 Dec 1991

3040-01-349-7396
Mechanical Drive Housing

013497396
A9 3235G2113: RNCC: 3 | RNVC: 2
A9 3235G2113: RNCC: 5 | RNVC: 9

3 Dec 1991

3040-01-349-7395
Mechanical Drive Housing

013497395
A2 3235G2113: RNCC: 3 | RNVC: 2
A10 3235G2113: RNCC: 5 | RNVC: 9

3 Dec 1991

3040-01-348-8138
Rigid Connecting Link

013488138
6800-9: RNCC: 3 | RNVC: 2
DAA3297P213-101: RNCC: 5 | RNVC: 2
DAA3297P213-101: RNCC: 5 | RNVC: 9
N3297P213: RNCC: 5 | RNVC: 9
DAA3297P213: RNCC: D | RNVC: 9

16 Nov 1991

3040-01-348-7427
Rigid Connecting Link

013487427
1101545C94: RNCC: 3 | RNVC: 9
1101545C94: RNCC: 5 | RNVC: 2
1101545C93: RNCC: 5 | RNVC: 9
1101545C93: RNCC: 5 | RNVC: 9

15 Nov 1991

3040-01-385-3798
Linear Actuating Cylinder Piston Rod

013853798
101C413EFP1: RNCC: 3 | RNVC: 9
101C413EFP1: RNCC: 5 | RNVC: 9
509E211XC PIECE 36: RNCC: 5 | RNVC: 9
509E211XC PIECE 36: RNCC: 5 | RNVC: 9
101C413EFP1: RNCC: C | RNVC: 1
101C413EFP1: RNCC: C | RNVC: 1
509E211XC: RNCC: D | RNVC: 9

11 Jan 1994

3040-01-348-4473
Nonaircraft Mechanical Actuator

013484473
87034A6057: RNCC: 3 | RNVC: 9
TBO: RNCC: 5 | RNVC: 9
87034A6057: RNCC: D | RNVC: 9

9 Nov 1991

3040-01-384-9939
Rigid Connecting Link

013849939
810935-1: RNCC: 3 | RNVC: 2

30 Dec 1993

3040-01-384-8961
Rigid Connecting Link

013848961
357019-1: RNCC: 3 | RNVC: 2
357019: RNCC: D | RNVC: 9

23 Dec 1993

3040-01-348-1593
Linear Actuating Cylinder Assembly

013481593
A-8426: RNCC: 3 | RNVC: 2
15889B: RNCC: 5 | RNVC: 2

5 Nov 1991

3040-01-348-1575
Nonaircraft Mechanical Actuator

013481575
87034A6058: RNCC: 3 | RNVC: 9
87034A6058: RNCC: 7 | RNVC: 2

5 Nov 1991

3040-01-347-7454
Controllable Swashplate

013477454
9220570: RNCC: 3 | RNVC: 2
9221370: RNCC: 5 | RNVC: 9
9220570: RNCC: 5 | RNVC: 9

28 Oct 1991

3040-01-347-5766
Remote Control Lever

013475766
5032T07G03: RNCC: 3 | RNVC: 2
10159293: RNCC: 6 | RNVC: 9

24 Oct 1991

3040-01-347-5510
Linear Actuating Cylinder Assembly Parts Kit

013475510
RE15905: RNCC: 3 | RNVC: 2
RE15905: RNCC: 5 | RNVC: 9

24 Oct 1991

3040-01-347-5509
Linear Actuating Cylinder Assembly Parts Kit

013475509
RE21395: RNCC: 3 | RNVC: 2
RE21395: RNCC: 5 | RNVC: 9

24 Oct 1991

3040-01-383-5540
Rigid Connecting Link

013835540
200082-001: RNCC: 3 | RNVC: 9
CB-200082-001: RNCC: 5 | RNVC: 9
200000 PIECE 9.16: RNCC: 5 | RNVC: 9
200100 PIECE 9.16: RNCC: 5 | RNVC: 9
200082: RNCC: 5 | RNVC: 9
200082-001: RNCC: C | RNVC: 1
CB-200082-001: RNCC: C | RNVC: 1
CB-200082-001: RNCC: C | RNVC: 1
200082-001: RNCC: C | RNVC: 1

25 Nov 1993

3040-01-383-5458
Remote Control Lever

013835458
200083 001: RNCC: 3 | RNVC: 9
200000 PIECE 9.18: RNCC: 5 | RNVC: 9
CC-200083-001: RNCC: 5 | RNVC: 9
200100 PIECE 9.18: RNCC: 5 | RNVC: 9
200083: RNCC: 5 | RNVC: 9
200083 001: RNCC: C | RNVC: 1
200083 001: RNCC: C | RNVC: 1

25 Nov 1993

3040-01-383-5258
Shaft Retaining Plate

013835258
5129917: RNCC: 3 | RNVC: 9

25 Nov 1993

3040-01-346-8465
Body Hub

013468465
T30720: RNCC: 3 | RNVC: 2
T30720: RNCC: 5 | RNVC: 9
R62371: RNCC: 5 | RNVC: 9

11 Oct 1991

3040-01-346-4753
Shaft Retaining Plate

013464753
1 467 030 308: RNCC: 3 | RNVC: 2
1 467 030 308 741: RNCC: 5 | RNVC: 2
1 467 030 304: RNCC: 5 | RNVC: 9

5 Oct 1991

3040-01-346-4035
Linear Actuating Cylinder Piston

013464035
4460474: RNCC: 3 | RNVC: 9

4 Oct 1991

3040-01-345-6777
Rigid Connecting Link

013456777
5058T66P01: RNCC: 1 | RNVC: 2
HTLK4-6: RNCC: 3 | RNVC: 2
178292-X: RNCC: 3 | RNVC: 2
10159292: RNCC: 6 | RNVC: 9
5058T66: RNCC: D | RNVC: 9
5058T28G01: RNCC: E | RNVC: 8

23 Sep 1991

3040-01-345-6776
Bell Crank

013456776
5032T59G02: RNCC: 3 | RNVC: 2
10107275: RNCC: 6 | RNVC: 9

23 Sep 1991

3040-01-345-5773
Controllable Swashplate

013455773
4460394: RNCC: 3 | RNVC: 9

21 Sep 1991

3040-01-345-4001
Linear Actuating Cylinder Assembly

013454001
1986745C1: RNCC: 3 | RNVC: 2
G106967: RNCC: 5 | RNVC: 9
XG106967: RNCC: 5 | RNVC: 9

18 Sep 1991

3040-01-345-3987
Manual Control Lever

013453987
46092-1135: RNCC: 3 | RNVC: 9

18 Sep 1991

3040-01-345-3686
Rigid Connecting Link

013453686
A-16: RNCC: 3 | RNVC: 2

18 Sep 1991

3040-01-345-2994
Straight Shaft

013452994
351-0463-01: RNCC: 3 | RNVC: 2

16 Sep 1991

3040-01-345-2992
Straight Shaft

013452992
1718330: RNCC: 3 | RNVC: 2
12640784: RNCC: 5 | RNVC: 2
1718330: RNCC: 5 | RNVC: 9

16 Sep 1991

3040-01-345-2048
Linear Actuating Cylinder Assembly

013452048
G107039: RNCC: 3 | RNVC: 2

13 Sep 1991

3040-01-345-1125
Mechanical Drive Housing

013451125
02-23-00211-022: RNCC: 3 | RNVC: 2
2FP83: RNCC: 5 | RNVC: 2
2FP83: RNCC: 5 | RNVC: 9
05-71-00764: RNCC: D | RNVC: 9

12 Sep 1991

3040-01-345-0318
Shaft Collar

013450318
6435K38: RNCC: 3 | RNVC: 2

10 Sep 1991

3040-01-344-8301
Extension Shaft

013448301
384-1385-00: RNCC: 3 | RNVC: 2

6 Sep 1991

3040-01-344-6395
Shaft Collar

013446395
28007: RNCC: 3 | RNVC: 9

4 Sep 1991

3040-01-344-6409
Mechanical Drive Housing

013446409
7960181-501: RNCC: 3 | RNVC: 2

4 Sep 1991

3040-01-344-4010
Pawl

013444010
105-0959-01: RNCC: 3 | RNVC: 2
105-0959-00: RNCC: D | RNVC: 9

28 Aug 1991

3040-01-344-1968
Ball Joint

013441968
36637: RNCC: 3 | RNVC: 2
36637: RNCC: 5 | RNVC: 9

24 Aug 1991

3040-01-344-1853
Manual Control Lever

013441853
46092-1111: RNCC: 3 | RNVC: 9

24 Aug 1991

3040-01-343-1854
Piston Rod Ring

013431854
721029: RNCC: 3 | RNVC: 2

7 Aug 1991

3040-01-343-0782
Ball Joint

013430782
A29104-002: RNCC: 3 | RNVC: 2
A29104-002: RNCC: 5 | RNVC: 9
A29104: RNCC: D | RNVC: 9

4 Aug 1991

3040-01-343-0703
Control Cam

013430703
3039-674: RNCC: 3 | RNVC: 2
3039-674: RNCC: 5 | RNVC: 2
3039-674: RNCC: 5 | RNVC: 2

4 Aug 1991

3040-01-343-0662
Linear Actuating Cylinder Assembly

013430662
AH234000: RNCC: 3 | RNVC: 2
AH139130: RNCC: 5 | RNVC: 9
AH154780: RNCC: 5 | RNVC: 9
RE21961: RNCC: 5 | RNVC: 9

4 Aug 1991

3040-01-342-8705
Friction Lining Set

013428705
SB06652: RNCC: 3 | RNVC: 2
SB06598: RNCC: 5 | RNVC: 9

31 Jul 1991

3040-01-342-4111
Push-Pull Control Assembly

013424111
D38034-002-60: RNCC: 3 | RNVC: 9
D38034-002-60: RNCC: 5 | RNVC: 2
74000069: RNCC: 5 | RNVC: 9

22 Jul 1991

3040-01-342-4105
Linear Actuating Cylinder

013424105
11290: RNCC: 3 | RNVC: 2
L835028A0444: RNCC: 5 | RNVC: 9
10698: RNCC: 5 | RNVC: 9
634530: RNCC: 5 | RNVC: 9
835028A0444: RNCC: 7 | RNVC: 2

22 Jul 1991

3040-01-342-4073
Linear Actuating Cylinder Assembly Parts Kit

013424073
RE21874: RNCC: 3 | RNVC: 2
RE21874: RNCC: 5 | RNVC: 9

22 Jul 1991

3040-01-342-3980
Linear Actuating Cylinder

013423980
3770521044: RNCC: 3 | RNVC: 2
10694: RNCC: 3 | RNVC: 9
L835028A0388: RNCC: 5 | RNVC: 2
835028A0388: RNCC: 7 | RNVC: 2

5 Feb 2001

3040-01-342-3976
Push-Pull Control Assembly

013423976
L835028A0935: RNCC: 3 | RNVC: 2
835028A0935: RNCC: 5 | RNVC: 2

22 Jul 1991

3040-01-342-2985
Remote Control Lever

013422985
3825062-6: RNCC: 3 | RNVC: 2
3825062-6: RNCC: 5 | RNVC: 2
3825062-6: RNCC: 5 | RNVC: 9
3825062-2: RNCC: 5 | RNVC: 9
10107257: RNCC: 6 | RNVC: 9

18 Jul 1991

3040-01-341-8631
Linear Actuating Cylinder Assembly

013418631
P28108: RNCC: 3 | RNVC: 2
P28108: RNCC: 3 | RNVC: 9

10 Jul 1991

3040-01-341-7625
Linear Actuating Cylinder Assembly

013417625
120004: RNCC: 3 | RNVC: 2
P28107: RNCC: 5 | RNVC: 2
P28107: RNCC: 5 | RNVC: 9

7 Jul 1991

3040-01-341-7624
Linear Actuating Cylinder Assembly

013417624
150006: RNCC: 3 | RNVC: 2
P28028: RNCC: 5 | RNVC: 2
P28028: RNCC: 5 | RNVC: 9

7 Jul 1991

3040-01-341-7626
Linear Actuating Cylinder Assembly

013417626
120001: RNCC: 3 | RNVC: 2
P40027: RNCC: 5 | RNVC: 2
P40027: RNCC: 5 | RNVC: 9

7 Jul 1991

3040-01-341-7158
Flexible Drive Shaft

013417158
23081-1150: RNCC: 3 | RNVC: 2
23081-1150: RNCC: 3 | RNVC: 9
978.91.23.912: RNCC: 5 | RNVC: 2

5 Jul 1991

3040-01-341-2240
Control Cam

013412240
526468: RNCC: 3 | RNVC: 9

26 Jun 1991

3040-01-341-2208
Straight Shaft

013412208
1-30-630RGPC5766: RNCC: 3 | RNVC: 2
1-30-630RGPC5766: RNCC: 5 | RNVC: 9
5766: RNCC: C | RNVC: 1

26 Jun 1991

3040-01-341-0446
Rigid Connecting Link

013410446
4007268-0001: RNCC: 3 | RNVC: 2
4007268: RNCC: D | RNVC: 9

23 Jun 1991

3040-01-341-0440
Ball Joint

013410440
12286206: RNCC: 3 | RNVC: 2

23 Jun 1991

3040-01-341-0186
Mechanical Drive Housing

013410186
30150102: RNCC: 3 | RNVC: 9
0150014 ITEM 10: RNCC: 5 | RNVC: 9
0150102: RNCC: C | RNVC: 1

23 Jun 1991

3040-01-340-8920
Mechanical Drive Housing

013408920
12347085-1: RNCC: 3 | RNVC: 2
12347085: RNCC: D | RNVC: 9

21 Jun 1991

3040-01-340-6058
Remote Control Lever

013406058
8370606: RNCC: 3 | RNVC: 9
8470606: RNCC: 5 | RNVC: 9
8370606: RNCC: C | RNVC: 1

17 Jun 1991

3040-01-340-6051
Nonrotating Shaft Eye Bracket

013406051
11578915: RNCC: 3 | RNVC: 2

17 Jun 1991

3040-01-340-5957
Manual Control Lever

013405957
1 461 902 311: RNCC: 3 | RNVC: 2

17 Jun 1991

3040-01-340-1412
Shouldered Shaft

013401412
8470154: RNCC: 3 | RNVC: 9

10 Jun 1991

3040-01-339-6859
Pawl

013396859
10029184: RNCC: 3 | RNVC: 2

28 May 1991

3040-01-339-5171
Shouldered Shaft Assembly

013395171
P91582: RNCC: 3 | RNVC: 2
P91582: RNCC: 3 | RNVC: 9
3-13840: RNCC: 5 | RNVC: 9

23 May 1991

3040-01-372-8944
Straight Shaft

013728944
203587-3: RNCC: 3 | RNVC: 2

23 Mar 1993

3040-01-339-2170
Piston Ring

013392170
721016: RNCC: 3 | RNVC: 2
2000-40X1/4: RNCC: 3 | RNVC: 2
721016: RNCC: 5 | RNVC: 9

19 May 1991

3040-01-339-1612
Linear Actuating Cylinder Piston

013391612
1306053: RNCC: 3 | RNVC: 2
1306053: RNCC: 5 | RNVC: 9
319864: RNCC: D | RNVC: 9

17 May 1991

3040-01-339-1602
Counterbalance Weight

013391602
204770-1: RNCC: 3 | RNVC: 2
204770: RNCC: D | RNVC: 9

17 May 1991

3040-01-339-0543
Push-Pull Control Assembly

013390543
D38012-003-108: RNCC: 3 | RNVC: 9
433-108: RNCC: 5 | RNVC: 2
433-9: RNCC: 5 | RNVC: 2
P17591: RNCC: 5 | RNVC: 2
P1343C108: RNCC: 5 | RNVC: 2
P17591: RNCC: 5 | RNVC: 9
D38012-003-108: RNCC: 5 | RNVC: 9

15 May 1991

3040-01-339-0478
Mechanical Drive Housing

013390478
9360111: RNCC: 3 | RNVC: 2

15 May 1991

3040-01-338-7767
Rigid Connecting Link

013387767
4701-066: RNCC: 3 | RNVC: 2
4412-110: RNCC: E | RNVC: 8

12 May 1991

3040-01-338-7565
Linear Actuating Cylinder Assembly

013387565
1332025: RNCC: 3 | RNVC: 2
1332025: RNCC: 3 | RNVC: 9
1317818: RNCC: 5 | RNVC: 9
1317816: RNCC: D | RNVC: 9

10 May 1991

3040-01-338-6489
Linear Actuating Cylinder Cap

013386489
324023: RNCC: 3 | RNVC: 2
324023: RNCC: 5 | RNVC: 9

8 May 1991

3040-01-338-3938
Shouldered Shaft

013383938
B6314: RNCC: 3 | RNVC: 2
B6314 XA7533: RNCC: 5 | RNVC: 9
XA-7533: RNCC: D | RNVC: 9

3 May 1991

3040-01-338-3793
Cylinder Support

013383793
12913202: RNCC: 3 | RNVC: 2

3 May 1991

3040-01-338-3697
Manual Control Lever

013383697
1318406: RNCC: 3 | RNVC: 2
1318406: RNCC: 5 | RNVC: 9

3 May 1991

3040-01-371-2731
Nonrotating Shaft Eye Bracket

013712731
67888: RNCC: 3 | RNVC: 9

9 Feb 1993

3040-01-338-2354
Shaft Retaining Plate

013382354
0223-00120-150: RNCC: 3 | RNVC: 2
02-20-00802-150 REV A ITEM 2: RNCC: 5 | RNVC: 2
02-20-00802-150: RNCC: D | RNVC: 9

28 Apr 1991

3040-01-338-2235
Straight Shaft

013382235
12913208: RNCC: 3 | RNVC: 2

28 Apr 1991

3040-01-338-1917
Linear Actuating Cylinder Piston

013381917
1262722031: RNCC: 3 | RNVC: 2
95124-991: RNCC: 3 | RNVC: 9
1262722031: RNCC: 5 | RNVC: 9
4538742-895: RNCC: 5 | RNVC: 9

28 Apr 1991

3040-01-337-7573
Rigid Connecting Link

013377573
P91534: RNCC: 3 | RNVC: 2
P91534: RNCC: 3 | RNVC: 9
80839-16: RNCC: 5 | RNVC: 9

21 Apr 1991

3040-01-337-7570
Body Hub

013377570
2-34347: RNCC: 3 | RNVC: 2

21 Apr 1991

3040-01-337-7568
Bell Crank

013377568
1310975: RNCC: 3 | RNVC: 2
1310975: RNCC: 5 | RNVC: 9

21 Apr 1991

3040-01-337-7462
Bevel Gearshaft

013377462
6427-H: RNCC: 3 | RNVC: 2

21 Apr 1991

3040-01-337-7382
Linear Actuating Cylinder Piston

013377382
289968: RNCC: 3 | RNVC: 2
289968: RNCC: 5 | RNVC: 9

21 Apr 1991

3040-01-337-7310
Shouldered Shaft

013377310
685-008-120: RNCC: 3 | RNVC: 2

21 Apr 1991

3040-01-337-6193
Linear Actuating Cylinder Assembly

013376193
120002: RNCC: 3 | RNVC: 2
P40043: RNCC: 5 | RNVC: 2
P40043: RNCC: 5 | RNVC: 9

18 Apr 1991

3040-01-370-2963
Push-Pull Control Assembly

013702963
174-L-GG-3-84: RNCC: 3 | RNVC: 2
174-L-GG-3-84: RNCC: 3 | RNVC: 2
SW25649: RNCC: 7 | RNVC: 2

17 Jan 1993

3040-01-337-4382
Remote Control Lever

013374382
DRP-16093 REF10: RNCC: 3 | RNVC: 9
2321585: RNCC: 5 | RNVC: 9
DRP-16093 PC 10: RNCC: C | RNVC: 1
DRP-16093 REF10: RNCC: C | RNVC: 1
2321585: RNCC: C | RNVC: 1

14 Apr 1991

3040-01-337-4166
Linear Actuating Cylinder Piston

013374166
786301: RNCC: 3 | RNVC: 9

14 Apr 1991

3040-01-337-4161
Mechanical Drive Housing

013374161
23016763: RNCC: 3 | RNVC: 2

14 Apr 1991

3040-01-337-4048
Shouldered Shaft

013374048
R82052: RNCC: 3 | RNVC: 2
R82052: RNCC: 5 | RNVC: 9

14 Apr 1991

3040-01-337-0537
Shaft Collar

013370537
70351-38203-101: RNCC: 3 | RNVC: 2

9 Apr 1991

3040-01-336-8294
Rigid Connecting Link

013368294
10128774: RNCC: 3 | RNVC: 2
10128774: RNCC: 3 | RNVC: 9
28774A: RNCC: 5 | RNVC: 9

3 Apr 1991

3040-01-336-8216
Manual Control Lever

013368216
10729415: RNCC: 3 | RNVC: 2
9120 0590-54: RNCC: 3 | RNVC: 9
P29415: RNCC: 5 | RNVC: 9
P29415: RNCC: 5 | RNVC: 9

3 Apr 1991

3040-01-336-6039
Linear Actuating Cylinder Piston

013366039
22133: RNCC: 3 | RNVC: 2
P92384: RNCC: 5 | RNVC: 2
P92384: RNCC: 5 | RNVC: 9

28 Mar 1991

3040-01-336-3374
Linear Actuating Cylinder Assembly

013363374
160005: RNCC: 3 | RNVC: 2
10226558: RNCC: 5 | RNVC: 2
P28041: RNCC: 5 | RNVC: 9
P28041: RNCC: 5 | RNVC: 9

24 Mar 1991

3040-01-336-3375
Linear Actuating Cylinder Assembly

013363375
160004: RNCC: 3 | RNVC: 2
P28044: RNCC: 5 | RNVC: 2
P28044: RNCC: 5 | RNVC: 9

24 Mar 1991

3040-01-336-3334
Shouldered Shaft

013363334
MB787070: RNCC: 3 | RNVC: 9
P91913: RNCC: 5 | RNVC: 2
P91913: RNCC: 5 | RNVC: 9

24 Mar 1991

3040-01-336-2643
Push-Pull Control Assembly

013362643
28494B: RNCC: 3 | RNVC: 2
28494B: RNCC: 3 | RNVC: 9
PCL401-802: RNCC: 5 | RNVC: 2
P40348: RNCC: 5 | RNVC: 9

21 Mar 1991

3040-01-336-2634
Linear Actuating Cylinder Assembly

013362634
160003: RNCC: 3 | RNVC: 2
P28045: RNCC: 5 | RNVC: 2
P28045: RNCC: 5 | RNVC: 9

21 Mar 1991

3040-01-336-2626
Manual Control Lever

013362626
10740243: RNCC: 3 | RNVC: 2
10740243: RNCC: 3 | RNVC: 9
P40243: RNCC: 5 | RNVC: 9
PCL401-666B: RNCC: 5 | RNVC: 9

21 Mar 1991

3040-01-336-2627
Manual Control Lever

013362627
PCL401-667A: RNCC: 3 | RNVC: 9
P40009: RNCC: 5 | RNVC: 2
P40009: RNCC: 5 | RNVC: 9

21 Mar 1991

3040-01-336-0754
Mechanical Drive Housing

013360754
RE35547: RNCC: 3 | RNVC: 2
RE35442: RNCC: 5 | RNVC: 9
RE35442: RNCC: 5 | RNVC: 9

20 Mar 1991

3040-01-336-0469
Push-Pull Control Assembly

013360469
160-071-009: RNCC: 3 | RNVC: 2
160-071-009: RNCC: 3 | RNVC: 9

19 Mar 1991

3040-01-335-9894
Coupling Driver

013359894
4642-311-091: RNCC: 3 | RNVC: 9
T116598: RNCC: 5 | RNVC: 2
T116598: RNCC: 5 | RNVC: 9

19 Mar 1991

3040-01-335-7366
Manual Control Lever

013357366
T119667: RNCC: 3 | RNVC: 2
T119667: RNCC: 5 | RNVC: 9

13 Mar 1991

3040-01-335-7298
Shouldered Shaft

013357298
4642 303 002: RNCC: 3 | RNVC: 9
T116539: RNCC: 5 | RNVC: 2
T116539: RNCC: 5 | RNVC: 9

13 Mar 1991

3040-01-334-8333
Pawl

013348333
9032758-01: RNCC: 3 | RNVC: 2

28 Feb 1991

3040-01-334-7524
Shouldered Shaft

013347524
1967-2847A: RNCC: 3 | RNVC: 2
1967-2847A: RNCC: 3 | RNVC: 9
1967-2847A: RNCC: 5 | RNVC: 2
1967-2847: RNCC: D | RNVC: 9

27 Feb 1991

3040-01-334-4331
Nonrotating Shaft Eye Bracket

013344331
17786A: RNCC: 3 | RNVC: 2
17786A: RNCC: 3 | RNVC: 9

23 Feb 1991

3040-01-334-3970
Nonrotating Shaft Eye Bracket

013343970
AD706996: RNCC: 3 | RNVC: 2
AD706996: RNCC: 5 | RNVC: 2
AD706996: RNCC: 5 | RNVC: 9

21 Feb 1991

3040-01-334-3890
Linear Actuating Cylinder Assembly

013343890
87034A6003: RNCC: 3 | RNVC: 9
2887-01-00: RNCC: 5 | RNVC: 2
87034A6003: RNCC: 7 | RNVC: 2

21 Feb 1991

3040-01-334-0814
Internal Gear And Brake Housing Assembly

013340814
2110724: RNCC: 3 | RNVC: 2
P91475: RNCC: 5 | RNVC: 2
P91475: RNCC: 5 | RNVC: 9
2110724: RNCC: 5 | RNVC: 9

14 Feb 1991

3040-01-333-9554
Rigid Connecting Link

013339554
28415A: RNCC: 3 | RNVC: 2
28415A: RNCC: 3 | RNVC: 9

12 Feb 1991

3040-01-333-9475
Straight Shaft

013339475
2110723: RNCC: 3 | RNVC: 2
P91498: RNCC: 5 | RNVC: 2
2110723: RNCC: 5 | RNVC: 9
P91498: RNCC: 5 | RNVC: 9

12 Feb 1991

3040-01-333-9476
Shouldered Shaft

013339476
12214: RNCC: 3 | RNVC: 2
P92321: RNCC: 5 | RNVC: 2
P92321: RNCC: 5 | RNVC: 9

12 Feb 1991

3040-01-333-7624
Shouldered Shaft

013337624
AD451621: RNCC: 3 | RNVC: 2
AD451621: RNCC: 5 | RNVC: 9

8 Feb 1991

3040-01-333-6073
Brake Disc

013336073
2110944: RNCC: 3 | RNVC: 2
P91437: RNCC: 5 | RNVC: 2
10791437: RNCC: 5 | RNVC: 2
10791437: RNCC: 5 | RNVC: 9
P91437: RNCC: 5 | RNVC: 9
2110944: RNCC: 5 | RNVC: 9

7 Feb 1991

3040-01-333-3910
Shouldered Shaft

013333910
246327-2: RNCC: 3 | RNVC: 2
246327-2: RNCC: 5 | RNVC: 9
246327-2: RNCC: 5 | RNVC: 9
246327: RNCC: D | RNVC: 9

1 Feb 1991

3040-01-333-2996
Ball Joint

013332996
3980-2: RNCC: 3 | RNVC: 2
ES26R: RNCC: 5 | RNVC: 9
ES26R: RNCC: 5 | RNVC: 9
500K0874-1: RNCC: 5 | RNVC: 9

30 Jan 1991

3040-01-333-2934
Shouldered Shaft

013332934
R86828: RNCC: 3 | RNVC: 2
P91153: RNCC: 5 | RNVC: 2
P91153: RNCC: 5 | RNVC: 9

30 Jan 1991

3040-01-333-1508
Straight Shaft

013331508
704AS5368: RNCC: 3 | RNVC: 2

25 Jan 1991

3040-01-333-1503
Shaft Collar

013331503
R65701: RNCC: 3 | RNVC: 2
028021-0220: RNCC: 5 | RNVC: 2
028021-0220: RNCC: 5 | RNVC: 9
028021-0220: RNCC: 5 | RNVC: 9

25 Jan 1991

3040-01-333-0189
Shouldered Shaft

013330189
7123-726: RNCC: 3 | RNVC: 2
3040PL0825633: RNCC: 6 | RNVC: 9

21 Jan 1991

3040-01-332-6109
Nonrotating Shaft Eye Bracket

013326109
247023: RNCC: 3 | RNVC: 2
247023: RNCC: 5 | RNVC: 9

12 Jan 1991

3040-01-332-2443
Shaft Collar

013322443
6G8815: RNCC: 3 | RNVC: 2

8 Jan 1991

3040-01-332-2381
Bell Crank

013322381
3825068-1: RNCC: 3 | RNVC: 2
3825068-1: RNCC: 5 | RNVC: 2

8 Jan 1991

3040-01-332-1638
Manual Control Lever

013321638
8W2666: RNCC: 3 | RNVC: 2

5 Jan 1991

3040-01-332-1617
Shouldered Shaft

013321617
79422: RNCC: 3 | RNVC: 2
79422: RNCC: 5 | RNVC: 9
A001 4626AA: RNCC: D | RNVC: 9

5 Jan 1991

3040-01-332-1365
Manual Control Lever Assembly

013321365
361 9118 311: RNCC: 3 | RNVC: 2
AT116: RNCC: 5 | RNVC: 2
AT 116422: RNCC: 5 | RNVC: 9

4 Jan 1991

3040-01-362-2655
Rigid Connecting Link

013622655
374536-2: RNCC: 3 | RNVC: 2

4 Aug 1992

3040-01-332-0863
Remote Control Lever

013320863
4007147-0502: RNCC: 3 | RNVC: 2
4007147-0501: RNCC: 5 | RNVC: 9
4007147-0501: RNCC: 5 | RNVC: 9
4007147: RNCC: D | RNVC: 9

3 Jan 1991

3040-01-331-8764
Shouldered Shaft

013318764
7-186-2: RNCC: 3 | RNVC: 2
207635: RNCC: 5 | RNVC: 2
7-186-2: RNCC: 5 | RNVC: 9

29 Dec 1990

3040-01-331-8724
Piston Ring

013318724
R85228: RNCC: 3 | RNVC: 2

29 Dec 1990

3040-01-331-7893
Manual Control Lever

013317893
361 9118 313: RNCC: 3 | RNVC: 2
AT117378: RNCC: 5 | RNVC: 2

27 Dec 1990

3040-01-331-7873
Push-Pull Control Assembly Parts Kit

013317873
391 1803 852: RNCC: 3 | RNVC: 2
AT117380: RNCC: 5 | RNVC: 2

27 Dec 1990

3040-01-331-7871
Linear Actuating Cylinder Assembly Parts Kit

013317871
AT139913: RNCC: 3 | RNVC: 2
391 1803 851: RNCC: 5 | RNVC: 9

27 Dec 1990

3040-01-331-7816
Piston Ring

013317816
R85229: RNCC: 3 | RNVC: 2

27 Dec 1990

3040-01-331-7815
Piston Ring

013317815
216-96150-173-1210: RNCC: 3 | RNVC: 2
RE25146: RNCC: 5 | RNVC: 2
RE25146: RNCC: 5 | RNVC: 9
216-96150-173-1210: RNCC: 5 | RNVC: 9

27 Dec 1990

3040-01-331-6222
Nonrotating Shaft Eye Bracket

013316222
1180382: RNCC: 3 | RNVC: 2
318974 FIND 34: RNCC: 5 | RNVC: 2

21 Dec 1990

3040-01-331-5615
Manual Control Lever

013315615
7266100: RNCC: 3 | RNVC: 2
8227180: RNCC: 7 | RNVC: 2

20 Dec 1990

3040-01-331-1712
Linear Actuating Cylinder Assembly Parts Kit

013311712
AT192187: RNCC: 3 | RNVC: 2
AT114822: RNCC: 5 | RNVC: 9
AT114822: RNCC: 5 | RNVC: 9

14 Dec 1990

3040-01-330-9515
Flexible Drive Shaft

013309515
7180-173D: RNCC: 3 | RNVC: 2

12 Dec 1990

3040-01-330-8224
Multiple Gears Gearshaft

013308224
4004794-0001: RNCC: 3 | RNVC: 2
4004794: RNCC: D | RNVC: 9

9 Dec 1990

3040-01-330-8218
Linear Actuating Cylinder Assembly

013308218
21172-5000: RNCC: 3 | RNVC: 2
50413564: RNCC: 5 | RNVC: 2
413552: RNCC: 5 | RNVC: 9
C-7900: RNCC: D | RNVC: 9

9 Dec 1990

3040-01-330-5997
Linear Actuating Cylinder Assembly Parts Kit

013305997
AT194293: RNCC: 3 | RNVC: 2
AT114831: RNCC: 5 | RNVC: 9
AT114831: RNCC: 5 | RNVC: 9

5 Dec 1990

3040-01-330-3252
Control Cam

013303252
7176-976D: RNCC: 3 | RNVC: 2

1 Dec 1990

3040-01-329-9876
Shouldered Shaft

013299876
A-3297-H-1022: RNCC: 3 | RNVC: 2
KIT 2624: RNCC: 3 | RNVC: 2
A-3297-H-1022S: RNCC: D | RNVC: 9

21 Nov 2008

3040-01-329-5052
Linear Actuating Cylinder Piston

013295052
21172-1500: RNCC: 3 | RNVC: 2
21172-150G: RNCC: D | RNVC: 9

18 Nov 1990

3040-01-329-5021
Linear Actuating Cylinder Assembly Parts Kit

013295021
R433022027: RNCC: 3 | RNVC: 9
P105946: RNCC: 5 | RNVC: 9

18 Nov 1990

3040-01-329-4906
Straight Shaft

013294906
12353606-2: RNCC: 3 | RNVC: 2
12353606: RNCC: D | RNVC: 9

18 Nov 1990

3040-01-329-3502
Straight Shaft

013293502
4N1108: RNCC: 3 | RNVC: 2

15 Nov 1990

3040-01-328-6488
Linear Actuating Cylinder Assembly

013286488
130003: RNCC: 3 | RNVC: 2
P28042: RNCC: 5 | RNVC: 9

6 Nov 1990

3040-01-328-6398
Shouldered Shaft

013286398
1179712: RNCC: 3 | RNVC: 2
7N2484: RNCC: 5 | RNVC: 9
7N2840 ITEM 3: RNCC: C | RNVC: 1

6 Nov 1990

3040-01-328-5611
Linear Actuating Cylinder Assembly

013285611
150011: RNCC: 3 | RNVC: 2
P40270: RNCC: 5 | RNVC: 9

4 Nov 1990

3040-01-328-5612
Linear Actuating Cylinder Assembly

013285612
130004: RNCC: 3 | RNVC: 2
P28046: RNCC: 5 | RNVC: 9

4 Nov 1990

3040-01-328-1514
Push-Pull Control Assembly

013281514
9-3322-B2MS-079: RNCC: 3 | RNVC: 2
500K0898: RNCC: 5 | RNVC: 9

27 Oct 1990

3040-01-328-0672
Lever And Shaft Ass

013280672
0391415: RNCC: 3 | RNVC: 2
0391415: RNCC: 3 | RNVC: 9
391415: RNCC: 5 | RNVC: 2
391415: RNCC: 5 | RNVC: 9
391415: RNCC: 5 | RNVC: 9
0391415: RNCC: 5 | RNVC: 9
391415: RNCC: 5 | RNVC: 9
0391415: RNCC: 5 | RNVC: 9

26 Oct 1990

3040-01-327-9837
Shouldered Shaft

013279837
3599-094: RNCC: 3 | RNVC: 2
3599-094: RNCC: 5 | RNVC: 2
3599-094: RNCC: 5 | RNVC: 9

25 Oct 1990

3040-01-327-4518
Rigid Connecting Link

013274518
4081654: RNCC: 3 | RNVC: 2
4081654: RNCC: 5 | RNVC: 2

14 Oct 1990

3040-01-327-4517
Rigid Connecting Link

013274517
4419-122: RNCC: 3 | RNVC: 2

14 Oct 1990

3040-01-327-3322
Linear Actuating Cylinder Assembly

013273322
50607302: RNCC: 3 | RNVC: 2
21174-5000: RNCC: 5 | RNVC: 9
607302: RNCC: 5 | RNVC: 9

12 Oct 1990

3040-01-327-2933
Linear Actuating Cylinder Piston

013272933
4642 306 278: RNCC: 3 | RNVC: 9
T144546: RNCC: 5 | RNVC: 2
T116950: RNCC: 5 | RNVC: 9

11 Oct 1990

3040-01-327-2932
Linear Actuating Cylinder Piston

013272932
T116942: RNCC: 3 | RNVC: 2
4642 306 265: RNCC: 5 | RNVC: 9

11 Oct 1990

3040-01-327-2928
Linear Actuating Cylinder Piston

013272928
T116554: RNCC: 3 | RNVC: 2
4642 306 229: RNCC: 5 | RNVC: 9

11 Oct 1990

3040-01-327-2927
Linear Actuating Cylinder Piston

013272927
T116552: RNCC: 3 | RNVC: 2
4642 306 219: RNCC: 5 | RNVC: 9

11 Oct 1990

3040-01-327-2930
Linear Actuating Cylinder Piston

013272930
T116568: RNCC: 3 | RNVC: 2
4642 306 253: RNCC: 5 | RNVC: 9

11 Oct 1990

3040-01-356-0476
Rigid Connecting Link

013560476
205-001-742-1: RNCC: 3 | RNVC: 2

28 Mar 1992

3040-01-327-2017
Linear Actuating Cylinder Piston

013272017
50607323: RNCC: 3 | RNVC: 2
21170-1500: RNCC: 5 | RNVC: 2
607323: RNCC: 5 | RNVC: 9

10 Oct 1990

3040-01-327-2015
Linear Actuating Cylinder Piston

013272015
21174-1500: RNCC: 3 | RNVC: 2

10 Oct 1990

3040-01-327-1856
Piston Rod Ring

013271856
3427: RNCC: 3 | RNVC: 2

10 Oct 1990

3040-01-327-1855
Piston Rod Ring

013271855
3412: RNCC: 3 | RNVC: 2

10 Oct 1990

3040-01-327-1426
Rigid Connecting Link

013271426
12342045: RNCC: 3 | RNVC: 2
5595490-C1: RNCC: 5 | RNVC: 2
3040PL0835693: RNCC: 6 | RNVC: 9

7 Oct 1990

3040-01-327-0478
Planetary Gears Carrier

013270478
12437: RNCC: 3 | RNVC: 2
12437: RNCC: 5 | RNVC: 2
12437-G: RNCC: D | RNVC: 9

5 Oct 1990

3040-01-327-0187
Mechanical Drive Housing

013270187
560.8675.266: RNCC: 3 | RNVC: 2
560.8676.061: RNCC: 5 | RNVC: 2
560.8676.061: RNCC: 5 | RNVC: 9
560-8676-061: RNCC: C | RNVC: 1

5 Oct 1990

3040-01-327-0189
Manual Control Lever

013270189
396611: RNCC: 3 | RNVC: 2
396706: RNCC: 5 | RNVC: 2
396611: RNCC: 5 | RNVC: 9
396706: RNCC: 5 | RNVC: 9
396611: RNCC: 5 | RNVC: 9
396706: RNCC: 5 | RNVC: 9
396611: RNCC: 5 | RNVC: 9
396706: RNCC: 5 | RNVC: 9

5 Oct 1990

3040-01-326-9172
Linear Actuating Cylinder Assembly

013269172
933489C93: RNCC: 3 | RNVC: 2
933489C93: RNCC: 5 | RNVC: 2
933489C93: RNCC: 5 | RNVC: 9
933489C92: RNCC: 5 | RNVC: 9

3 Oct 1990

3040-01-325-8304
Shouldered Shaft

013258304
12295288: RNCC: 3 | RNVC: 2

11 Sep 1990

3040-01-352-1314
Multiple Gears Gearshaft

013521314
101119-2: RNCC: 3 | RNVC: 2

20 Jan 1992

3040-01-325-3029
Remote Control Lever

013253029
3D9777: RNCC: 3 | RNVC: 2

31 Aug 1990

3040-01-325-2328
Ball Joint

013252328
139024: RNCC: 3 | RNVC: 2
139024: RNCC: 5 | RNVC: 9

31 Aug 1990

3040-01-325-2285
Linear Actuating Cylinder Assembly

013252285
AH142931: RNCC: 3 | RNVC: 2
RE35605: RNCC: 5 | RNVC: 9
AH136551: RNCC: 5 | RNVC: 9

31 Aug 1990

3040-01-325-0161
Bevel Gearshaft

013250161
65357-07203-101: RNCC: 3 | RNVC: 2

26 Aug 1990

3040-01-324-9370
Counterbalance Weight

013249370
5543228: RNCC: 3 | RNVC: 2
5543228: RNCC: 5 | RNVC: 2

25 Aug 1990

3040-01-324-8540
Straight Shaft

013248540
R70111: RNCC: 3 | RNVC: 2

23 Aug 1990

3040-01-324-7874
Shouldered Shaft

013247874
R73013: RNCC: 3 | RNVC: 2

22 Aug 1990

3040-01-324-7873
Straight Shaft

013247873
R97998: RNCC: 3 | RNVC: 2

22 Aug 1990

3040-01-324-7673
Bevel Gearshaft

013247673
65357-07202-101: RNCC: 3 | RNVC: 2

22 Aug 1990

3040-01-324-3759
Cylind Stuffing Box

013243759
376 2504 296: RNCC: 3 | RNVC: 2
377 6321 017ITEM4: RNCC: 5 | RNVC: 2
375 2504 542: RNCC: 5 | RNVC: 9
377 6321 017: RNCC: D | RNVC: 9

19 Aug 1990

3040-01-350-3982
Rigid Connecting Link

013503982
4065914: RNCC: 3 | RNVC: 2
4065914: RNCC: 5 | RNVC: 2
4065914: RNCC: 5 | RNVC: 2
3040PL0669161: RNCC: 6 | RNVC: 9

14 Dec 1991

3040-01-324-1807
Mechanical Drive Housing

013241807
12364277: RNCC: 3 | RNVC: 2

11 Aug 1990

3040-01-323-9805
Straight Shaft

013239805
7002597-2: RNCC: 3 | RNVC: 2
7002597-2: RNCC: 5 | RNVC: 2
10130528: RNCC: 6 | RNVC: 9

6 Aug 1990

3040-01-323-9173
Remote Control Lever

013239173
BM-73108: RNCC: 3 | RNVC: 2
110481: RNCC: 3 | RNVC: 2

5 Aug 1990

3040-01-323-7646
Rigid Connecting Link

013237646
261.1415.006: RNCC: 3 | RNVC: 2
261.1415.006: RNCC: 5 | RNVC: 2

5 Aug 1990

3040-01-323-0974
Shouldered Shaft

013230974
7N5376: RNCC: 3 | RNVC: 2

20 Jul 1990

3040-01-323-0959
Counterbalance Weight

013230959
725170-1: RNCC: 3 | RNVC: 2

20 Jul 1990

3040-01-348-8022
Shouldered Shaft

013488022
75128: RNCC: 3 | RNVC: 9

16 Nov 1991

3040-01-322-9912
Manual Control Lever

013229912
12344217: RNCC: 3 | RNVC: 2
12344217: RNCC: D | RNVC: 9

18 Jul 1990

3040-01-322-9284
Rotating Shaft Eye Bracket

013229284
6T7061: RNCC: 3 | RNVC: 2

17 Jul 1990

3040-01-322-9183
Shouldered Shaft

013229183
8N8160: RNCC: 3 | RNVC: 2

17 Jul 1990

3040-01-322-7671
Linear Actuating Cylinder Piston

013227671
398483: RNCC: 3 | RNVC: 9
398483: RNCC: 5 | RNVC: 2
398483: RNCC: 5 | RNVC: 9
398483: RNCC: 5 | RNVC: 9
10009660: RNCC: 6 | RNVC: 9

13 Jul 1990

3040-01-322-5782
Manual Control Lever

013225782
7N9202: RNCC: 3 | RNVC: 2

10 Jul 1990

3040-01-322-5783
Manual Control Lever

013225783
7N5907: RNCC: 3 | RNVC: 2

10 Jul 1990

3040-01-322-5763
Counterbalance Weight

013225763
725170-3: RNCC: 3 | RNVC: 2

10 Jul 1990

3040-01-322-5753
Shouldered Shaft

013225753
5190445: RNCC: 3 | RNVC: 2
5190445: RNCC: 5 | RNVC: 2

10 Jul 1990

3040-01-322-4665
Bell Crank

013224665
7N5360: RNCC: 3 | RNVC: 2

6 Jul 1990

3040-01-322-4587
Straight Shaft

013224587
1W4342: RNCC: 3 | RNVC: 2

6 Jul 1990

3040-01-322-2741
Push-Pull Control Assembly

013222741
15619100: RNCC: 3 | RNVC: 2
02027-0005-48: RNCC: 5 | RNVC: 2
73153700: RNCC: 5 | RNVC: 9
02027-0005: RNCC: D | RNVC: 9

30 Jun 1990

3040-01-322-2528
Spur Gearshaft

013222528
313-2525-151: RNCC: 3 | RNVC: 2

30 Jun 1990

3040-01-322-0993
Spur Gearshaft

013220993
5190298: RNCC: 3 | RNVC: 2
5190298: RNCC: 5 | RNVC: 2
5190298: RNCC: 5 | RNVC: 2

28 Jun 1990

3040-01-322-0992
Spur Gearshaft

013220992
5190297: RNCC: 3 | RNVC: 2
5190297: RNCC: 5 | RNVC: 2
5190297: RNCC: 5 | RNVC: 2

28 Jun 1990

3040-01-322-0965
Straight Shaft

013220965
42524-00: RNCC: 3 | RNVC: 2
42524-00: RNCC: 5 | RNVC: 9

28 Jun 1990

3040-01-322-0969
Shouldered Shaft

013220969
5190311: RNCC: 3 | RNVC: 2
5190311: RNCC: 5 | RNVC: 2
5190311: RNCC: 5 | RNVC: 9

28 Jun 1990

3040-01-322-0000
Manual Control Lever

013220000
2537341-801: RNCC: 3 | RNVC: 9

27 Jun 1990

3040-01-321-6521
Rigid Connecting Link

013216521
13228E5296: RNCC: 3 | RNVC: 2

21 Jun 1990

3040-01-321-4483
Shaft Collar

013214483
15263-5738-0: RNCC: 3 | RNVC: 9
15263-5738-0: RNCC: 5 | RNVC: 2
15263-5738-0: RNCC: 5 | RNVC: 9
15261-5738-1: RNCC: 5 | RNVC: 9
15261-5738-0: RNCC: 5 | RNVC: 9
15261-5738-0: RNCC: 5 | RNVC: 9
15263-5738-0: RNCC: C | RNVC: 1

19 Jun 1990

3040-01-345-8825
Push-Pull Control Assembly

013458825
173-M-GG-2-99.5: RNCC: 3 | RNVC: 2
173-M-GG-2-99.5: RNCC: 3 | RNVC: 9

24 Sep 1991

3040-01-345-8827
Push-Pull Control Assembly

013458827
173-M-GG-2-197.5: RNCC: 3 | RNVC: 2
173-M-GG-2-197.5: RNCC: 3 | RNVC: 9

24 Sep 1991

3040-01-345-8826
Push-Pull Control Assembly

013458826
173-M-GG-2-174.5: RNCC: 3 | RNVC: 2
173-M-GG-2-174.5: RNCC: 3 | RNVC: 9

24 Sep 1991

3040-01-320-8299
Control Cable Assembly

013208299
PC1007: RNCC: 3 | RNVC: 9

4 Jun 1990

3040-01-345-3952
Straight Shaft

013453952
204233: RNCC: 3 | RNVC: 2
204233: RNCC: 5 | RNVC: 9
204233: RNCC: 5 | RNVC: 9
204233: RNCC: C | RNVC: 1
204233: RNCC: C | RNVC: 1
204233-MP: RNCC: D | RNVC: 9

18 Sep 1991

3040-01-320-0200
Right Angle Drive Assembly

013200200
5761781-1: RNCC: 3 | RNVC: 2
156806: RNCC: 5 | RNVC: 2
576178-1: RNCC: 5 | RNVC: 9
5761781: RNCC: D | RNVC: 9

18 May 1990

3040-01-320-0199
Right Angle Drive Assembly

013200199
5761781-2: RNCC: 3 | RNVC: 2
5761781: RNCC: D | RNVC: 9

18 May 1990

3040-01-320-0166
Brake Spring Assembly

013200166
88006: RNCC: 3 | RNVC: 9
M12-256-0: RNCC: 5 | RNVC: 9

18 May 1990

3040-01-320-0114
Body Hub

013200114
23524883: RNCC: 3 | RNVC: 2
8929492: RNCC: 5 | RNVC: 9

17 May 1990

3040-01-319-9411
Push-Pull Control Assembly

013199411
4294901: RNCC: 3 | RNVC: 1
D4294901: RNCC: 3 | RNVC: 2
DBR001000020: RNCC: 5 | RNVC: 9
BR0010000200000: RNCC: D | RNVC: 9

17 May 1990

3040-01-319-3402
Remote Control Lever

013193402
3681 227: RNCC: 3 | RNVC: 2

5 May 1990

3040-01-319-3409
Linear Actuating Cylinder Assembly

013193409
A11A80TJ2: RNCC: 3 | RNVC: 2
3184: RNCC: 3 | RNVC: 2
32035AX: RNCC: 5 | RNVC: 2
32035A: RNCC: 5 | RNVC: 9
32035AX: RNCC: 5 | RNVC: 9

5 May 1990

3040-01-319-3406
Shouldered Shaft

013193406
537-0680-00-0: RNCC: 3 | RNVC: 2
12M-G37F: RNCC: 5 | RNVC: 9

5 May 1990

3040-01-319-2901
Shaft Retaining Plate

013192901
3794-038: RNCC: 3 | RNVC: 2

5 May 1990

3040-01-342-9326
Rigid Connecting Link

013429326
32186: RNCC: 3 | RNVC: 2

2 Aug 1991

3040-01-318-7962
Push-Pull Control Assembly

013187962
53006917: RNCC: 3 | RNVC: 2
4428784: RNCC: 5 | RNVC: 9

25 Apr 1990

3040-01-318-4202
Flexible Control Casing

013184202
4306593: RNCC: 3 | RNVC: 2
4306593: RNCC: 5 | RNVC: 9

18 Apr 1990

3040-01-318-3165
Linear Actuating Cylinder

013183165
3C3413P07: RNCC: 3 | RNVC: 2

15 Apr 1990

3040-01-318-0219
Control Cam

013180219
3037-346: RNCC: 3 | RNVC: 2

11 Apr 1990

3040-01-318-0223
Mechanical Drive Housing

013180223
35-62315-1358-2: RNCC: 3 | RNVC: 2
35 62315 1358 2: RNCC: 5 | RNVC: 2
35-62315-1358-2: RNCC: 5 | RNVC: 9

11 Apr 1990

3040-01-317-5425
Remote Control Lever

013175425
4432-044: RNCC: 3 | RNVC: 2
4432-044: RNCC: 5 | RNVC: 2
4432-044: RNCC: 5 | RNVC: 2

31 Mar 1990

3040-01-317-5428
Rigid Connecting Link

013175428
4417-170: RNCC: 3 | RNVC: 2

31 Mar 1990

3040-01-317-4847
Shaft Retaining Plate

013174847
7C3259: RNCC: 3 | RNVC: 2

30 Mar 1990

3040-01-317-4498
Shouldered Shaft

013174498
7C2377: RNCC: 3 | RNVC: 2

30 Mar 1990

3040-01-317-2852
Detent Plate

013172852
XB2134: RNCC: 3 | RNVC: 2

27 Mar 1990

3040-01-317-2782
Shouldered Shaft

013172782
3502544-1: RNCC: 3 | RNVC: 2
3502544: RNCC: D | RNVC: 9

27 Mar 1990

3040-01-317-1205
Rigid Connecting Link

013171205
1441M27G01: RNCC: 3 | RNVC: 2

23 Mar 1990

3040-01-316-6511
Pawl

013166511
012427: RNCC: 3 | RNVC: 2
CR-21 ITEM 12-100: RNCC: 5 | RNVC: 9

13 Mar 1990

3040-01-316-5805
Straight Shaft

013165805
1819552-1: RNCC: 3 | RNVC: 2
1977616 ITEM 16: RNCC: 5 | RNVC: 2
1977616: RNCC: D | RNVC: 9

11 Mar 1990

3040-01-316-5806
Straight Shaft

013165806
1819552-2: RNCC: 3 | RNVC: 2
1977616 ITEM 15: RNCC: 5 | RNVC: 2
1977616: RNCC: D | RNVC: 9

11 Mar 1990

3040-01-316-3256
Ball Joint

013163256
48621: RNCC: 3 | RNVC: 2

8 Mar 1990

3040-01-316-2582
Shouldered Shaft Assembly

013162582
70351-08131-047: RNCC: 3 | RNVC: 2

7 Mar 1990

3040-01-316-2393
Shouldered Shaft

013162393
1858780: RNCC: 3 | RNVC: 2
1977616 ITEM 4: RNCC: 5 | RNVC: 2
1977616: RNCC: D | RNVC: 9

7 Mar 1990

3040-01-316-1083
Shouldered Shaft

013161083
808760: RNCC: 3 | RNVC: 2

3 Mar 1990

3040-01-316-0192
Linear Actuating Cylinder Assembly

013160192
382025: RNCC: 3 | RNVC: 9
C401923: RNCC: 5 | RNVC: 2

1 Mar 1990

3040-01-315-9366
Rigid Connecting Link

013159366
369D21008-3: RNCC: 3 | RNVC: 2
369D21008-3: RNCC: 5 | RNVC: 9

27 Feb 1990

3040-01-315-6678
Shaft Collar

013156678
1-3140008: RNCC: 3 | RNVC: 9
A31170011 PIECE 9: RNCC: 5 | RNVC: 9
T001314008: RNCC: 5 | RNVC: 9
A31170011: RNCC: D | RNVC: 9

22 Feb 1990

3040-01-315-5052
Brake Band And Lining

013155052
8673175: RNCC: 3 | RNVC: 2
8673175: RNCC: 3 | RNVC: 9
8654144: RNCC: 5 | RNVC: 9

17 Feb 1990

3040-01-315-4032
Linear Actuating Cylinder Assembly

013154032
9190TA: RNCC: 3 | RNVC: 2
6530-TA: RNCC: 5 | RNVC: 9

15 Feb 1990

3040-01-315-2492
Breather

013152492
DH1307H-20: RNCC: 3 | RNVC: 9

13 Feb 1990

3040-01-337-0109
Housing Adapter

013370109
132217G1: RNCC: 3 | RNVC: 1
143950PC18: RNCC: D | RNVC: 9

7 Apr 1991

3040-01-315-0983
Shaft Collar

013150983
92027-1794: RNCC: 3 | RNVC: 9
92027-1794: RNCC: 5 | RNVC: 2
92027-1794: RNCC: 5 | RNVC: 9

9 Feb 1990

3040-01-336-8207
Mechanical Drive Housing

013368207
23046559: RNCC: 3 | RNVC: 2

3 Apr 1991

3040-01-314-9368
Shaft Retaining Plate

013149368
3856-064: RNCC: 3 | RNVC: 2

8 Feb 1990

3040-01-314-9308
Shaft Collar

013149308
3510-088: RNCC: 3 | RNVC: 2

8 Feb 1990

3040-01-314-7831
Flexible Shaft Assembly

013147831
J3231274: RNCC: 3 | RNVC: 2
C710: RNCC: 3 | RNVC: 2
J3216342: RNCC: 5 | RNVC: 9
CC710: RNCC: 5 | RNVC: 9
3216342: RNCC: 5 | RNVC: 9

6 Feb 1990

3040-01-314-5173
Rotating Shaft Eye Bracket

013145173
365135: RNCC: 3 | RNVC: 2
365165: RNCC: 5 | RNVC: 9

31 Jan 1990

3040-01-314-4441
Linear Actuating Cylinder

013144441
2193: RNCC: 3 | RNVC: 2
738.04.022.01: RNCC: 3 | RNVC: 2
2193: RNCC: 5 | RNVC: 9
738-04-022-01: RNCC: 5 | RNVC: 9

30 Jan 1990

3040-01-314-4409
Mechanical Drive Housing

013144409
42499-1: RNCC: 3 | RNVC: 2

30 Jan 1990

3040-01-313-9500
Linear Actuating Cylinder Assembly

013139500
AH150: RNCC: 3 | RNVC: 2
AU43104: RNCC: 5 | RNVC: 9
AU43104: RNCC: 5 | RNVC: 9

20 Jan 1990

3040-01-313-6951
Mechanical Drive Housing

013136951
544923 02: RNCC: 3 | RNVC: 2

14 Jan 1990

3040-01-313-5499
Pawl

013135499
216: RNCC: 3 | RNVC: 2

11 Jan 1990

3040-01-313-5470
Brake Disc

013135470
25808: RNCC: 3 | RNVC: 9

11 Jan 1990

3040-01-313-4588
Shouldered Shaft

013134588
373458: RNCC: 3 | RNVC: 2
373458: RNCC: 5 | RNVC: 9
318262: RNCC: D | RNVC: 9

9 Jan 1990

3040-01-313-4228
Linear Actuating Cylinder Piston

013134228
738.04.021.01: RNCC: 3 | RNVC: 2
738-04-021-01: RNCC: 5 | RNVC: 9

9 Jan 1990

3040-01-313-2895
Linear Actuating Cylinder Assembly

013132895
240009: RNCC: 3 | RNVC: 2

4 Jan 1990

3040-01-313-2871
Nonaircraft Mechanical Actuator

013132871
42486: RNCC: 3 | RNVC: 2

4 Jan 1990

3040-01-313-2838
Shouldered Shaft

013132838
12351123: RNCC: 3 | RNVC: 2
12351123: RNCC: 3 | RNVC: 2
12351123: RNCC: 5 | RNVC: 2

4 Jan 1990

3040-01-313-2835
Shaft Collar

013132835
0429530408: RNCC: 3 | RNVC: 2
0540950002 ITEM 87: RNCC: 5 | RNVC: 2
0540950002: RNCC: D | RNVC: 9

4 Jan 1990

3040-01-333-8337
Bevel Gearshaft

013338337
400-040-041-103: RNCC: 3 | RNVC: 2
400-040-041: RNCC: D | RNVC: 9

9 Feb 1991

3040-01-313-2488
Shouldered Shaft

013132488
5400241W: RNCC: 3 | RNVC: 9
54002-41: RNCC: 5 | RNVC: 9

4 Jan 1990

3040-01-333-7053
Body Hub

013337053
28031-1: RNCC: 3 | RNVC: 2

8 Feb 1991

3040-01-313-0633
Linear Actuating Cylinder Cap

013130633
1310393: RNCC: 3 | RNVC: 2
388510: RNCC: 5 | RNVC: 9
1310393: RNCC: 5 | RNVC: 9

30 Dec 1989

3040-01-313-0598
Shouldered Shaft

013130598
N7046: RNCC: 3 | RNVC: 2

30 Dec 1989

3040-01-312-9683
Linear Actuating Cylinder Piston

013129683
36339: RNCC: 3 | RNVC: 2
36339: RNCC: 5 | RNVC: 9

27 Dec 1989

3040-01-312-9191
Shouldered Shaft

013129191
3082312018: RNCC: 3 | RNVC: 2
3082312018: RNCC: 5 | RNVC: 2
3082312018: RNCC: 5 | RNVC: 2

26 Dec 1989

3040-01-312-9013
Shouldered Shaft

013129013
M2-1250-D: RNCC: 3 | RNVC: 2

23 Dec 1989

3040-01-312-7319
Straight Shaft

013127319
838643-5: RNCC: 3 | RNVC: 9
838643-5: RNCC: 5 | RNVC: 2
838643-5: RNCC: 5 | RNVC: 2
838643-5: RNCC: 5 | RNVC: 9
838643-5: RNCC: 5 | RNVC: 9
838643: RNCC: 5 | RNVC: 9

21 Dec 1989

3040-01-312-6087
Body Hub

013126087
183904: RNCC: 3 | RNVC: 2
183904: RNCC: 5 | RNVC: 9

19 Dec 1989

3040-01-312-5418
Rigid Connecting Link

013125418
D5-19-9393-10: RNCC: 3 | RNVC: 2

17 Dec 1989

3040-01-332-4723
Push-Pull Control Assembly

013324723
183-V-TT-1-160: RNCC: 3 | RNVC: 2
183-V-TT-1-160: RNCC: 3 | RNVC: 9

11 Jan 1991

3040-01-312-4121
Shouldered Shaft

013124121
297565: RNCC: 3 | RNVC: 2
297565: RNCC: 5 | RNVC: 9
320664: RNCC: D | RNVC: 9

15 Dec 1989

3040-01-312-2574
Mechanical Drive Housing

013122574
260012: RNCC: 3 | RNVC: 2
260012: RNCC: 3 | RNVC: 9
260012: RNCC: C | RNVC: 1

13 Dec 1989

3040-01-312-2568
Control Cam

013122568
1365277: RNCC: 3 | RNVC: 2
AP004816000: RNCC: 5 | RNVC: 2
AP004816000: RNCC: 5 | RNVC: 9
201973: RNCC: 5 | RNVC: 9

13 Dec 1989

3040-01-312-2029
Rigid Connecting Link

013122029
477023C1: RNCC: 3 | RNVC: 2

12 Dec 1989

3040-01-312-1346
Mechanical Drive Housing

013121346
10-21-712-002: RNCC: 3 | RNVC: 9
10-21-712-002: RNCC: 5 | RNVC: 9

12 Dec 1989

3040-01-311-8220
Rigid Connecting Link

013118220
D5-19-9393-50: RNCC: 3 | RNVC: 2

6 Dec 1989

3040-01-311-8221
Rigid Connecting Link

013118221
D5-19-9393-20: RNCC: 3 | RNVC: 2

6 Dec 1989

3040-01-311-7222
Piston Ring

013117222
334155: RNCC: 3 | RNVC: 2
334155: RNCC: 5 | RNVC: 9
C-660772: RNCC: C | RNVC: 1
215300: RNCC: D | RNVC: 9

4 Dec 1989

3040-01-311-6132
Straight Shaft

013116132
022918-08: RNCC: 3 | RNVC: 2

1 Dec 1989

3040-01-311-5475
Rigid Connecting Link

013115475
D5-19-9393-60: RNCC: 3 | RNVC: 2

1 Dec 1989

3040-01-311-4199
Shouldered Shaft

013114199
7C3493: RNCC: 3 | RNVC: 2

28 Nov 1989

3040-01-311-3823
Mechanical Drive Housing

013113823
10029107: RNCC: 3 | RNVC: 2

25 Nov 1989

3040-01-311-2579
Linear Actuating Cylinder Cap

013112579
380926: RNCC: 3 | RNVC: 2
380926: RNCC: 5 | RNVC: 9
337299: RNCC: D | RNVC: 9

22 Nov 1989

3040-01-311-2581
Linear Actuating Cylinder Piston

013112581
1310339: RNCC: 3 | RNVC: 2
337219: RNCC: 5 | RNVC: 9

22 Nov 1989

3040-01-311-1670
Shouldered Shaft

013111670
324903: RNCC: 3 | RNVC: 2
324903: RNCC: 5 | RNVC: 9

21 Nov 1989

3040-01-310-8922
Differential Spider

013108922
822029-1: RNCC: 3 | RNVC: 2

16 Nov 1989

3040-01-310-8121
Remote Control Lever

013108121
10866858: RNCC: 3 | RNVC: 2

14 Nov 1989

3040-01-310-6599
Remote Control Lever

013106599
324914: RNCC: 3 | RNVC: 2
324914: RNCC: 5 | RNVC: 9

12 Nov 1989

3040-01-310-4289
Shouldered Shaft

013104289
02-06242: RNCC: 3 | RNVC: 2
02-06241: RNCC: 5 | RNVC: 9
4-20114 ITEM 008: RNCC: 5 | RNVC: 9
2-06241: RNCC: 5 | RNVC: 9
2-06242: RNCC: 5 | RNVC: 9
02006240: RNCC: C | RNVC: 1

4 Nov 1989

3040-01-310-2338
Rigid Connecting Link

013102338
325729: RNCC: 3 | RNVC: 2
325729: RNCC: 5 | RNVC: 9

1 Nov 1989

3040-01-310-2328
Manual Control Lever

013102328
324953: RNCC: 3 | RNVC: 2
324953: RNCC: 5 | RNVC: 9

1 Nov 1989

3040-01-310-2330
Linear Actuating Cylinder Cap

013102330
325009: RNCC: 3 | RNVC: 2
325009: RNCC: 5 | RNVC: 9

1 Nov 1989

3040-01-310-0044
Shouldered Shaft

013100044
93204-991: RNCC: 3 | RNVC: 9
4537785-101: RNCC: 5 | RNVC: 9
10348618: RNCC: 6 | RNVC: 9

27 Oct 1989

3040-01-310-0043
Shouldered Shaft

013100043
93184-991: RNCC: 3 | RNVC: 9
4537785-089: RNCC: 5 | RNVC: 9

27 Oct 1989

3040-01-309-8144
Shouldered Shaft

013098144
0150702: RNCC: 3 | RNVC: 9
238064: RNCC: 5 | RNVC: 2

24 Oct 1989

3040-01-309-7211
Counterbalance Weight

013097211
5188517-1: RNCC: 3 | RNVC: 2
5188517-1: RNCC: 5 | RNVC: 2

21 Oct 1989

3040-01-309-0836
Shouldered Shaft

013090836
1 463 161 596: RNCC: 3 | RNVC: 2
1463161596: RNCC: C | RNVC: 1

11 Oct 1989

3040-01-308-4357
Linear Actuating Cylinder Assembly

013084357
6532-HR: RNCC: 3 | RNVC: 2
97037: RNCC: 5 | RNVC: 2
97037: RNCC: 5 | RNVC: 9
97037: RNCC: D | RNVC: 9

28 Sep 1989

3040-01-308-1730
Brake Disc

013081730
1015Z1734: RNCC: 3 | RNVC: 2
738.07.005.01: RNCC: 5 | RNVC: 2
738.07.005.01: RNCC: 5 | RNVC: 9

23 Sep 1989

3040-01-308-1731
Brake Disc

013081731
1015Z1735: RNCC: 3 | RNVC: 2
738.07.610.01: RNCC: 5 | RNVC: 2
738.07.610.01: RNCC: 5 | RNVC: 9

23 Sep 1989

3040-01-308-1691
Shouldered Shaft

013081691
8508: RNCC: 3 | RNVC: 2

23 Sep 1989

3040-01-307-8015
Linear Actuating Cylinder Assembly

013078015
6533-HR: RNCC: 3 | RNVC: 2
97036: RNCC: 5 | RNVC: 9
97036: RNCC: 7 | RNVC: 2
6533-HR: RNCC: D | RNVC: 9

16 Sep 1989

3040-01-307-5763
Control Cam

013075763
P24694: RNCC: 3 | RNVC: 2
59512 PIECE 23: RNCC: 5 | RNVC: 9
59512: RNCC: D | RNVC: 9

13 Sep 1989

3040-01-307-5764
Control Cam

013075764
P43836: RNCC: 3 | RNVC: 2
59512 PIECE 31: RNCC: 5 | RNVC: 9
59512: RNCC: D | RNVC: 9

13 Sep 1989

3040-01-307-3745
Control Cam

013073745
16S1541-9: RNCC: 3 | RNVC: 2

9 Sep 1989

NSN 3040-01-307-3704 013073704 SHAFT,DISTRIBUTION,FUEL PUMP

3040-01-307-3704
Fuel Pump Distribution Shaft

013073704
1-463-161-776: RNCC: 3 | RNVC: 2
1-463-161-776: RNCC: 5 | RNVC: 2

9 Sep 1989

3040-01-307-1730
Bell Crank

013071730
10519438: RNCC: 3 | RNVC: 2

7 Sep 1989

3040-01-306-4018
Mechanical Drive Housing

013064018
313-8220-100: RNCC: 3 | RNVC: 2

23 Aug 1989

3040-01-306-3951
Shouldered Shaft

013063951
65508-89-A: RNCC: 3 | RNVC: 2
65508-89-A: RNCC: 3 | RNVC: 9
87255 PIECE 44: RNCC: 5 | RNVC: 2
87255 PIECE 44: RNCC: 5 | RNVC: 9

23 Aug 1989

3040-01-306-3011
Flexible Shaft Assembly

013063011
3025390: RNCC: 3 | RNVC: 9
214086: RNCC: 5 | RNVC: 9
AR10059: RNCC: 5 | RNVC: 9
MA207-21119: RNCC: 5 | RNVC: 9

22 Aug 1989

3040-01-306-1063
Rigid Connecting Link

013061063
93758-991: RNCC: 3 | RNVC: 9
93758-991: RNCC: 5 | RNVC: 2
4538284: RNCC: 5 | RNVC: 2
4538284-001: RNCC: 5 | RNVC: 9
93758-991: RNCC: 5 | RNVC: 9
4538284: RNCC: 5 | RNVC: 9

17 Aug 1989

3040-01-306-0326
Linear Actuating Cylinder Piston

013060326
E-1505: RNCC: 3 | RNVC: 2

16 Aug 1989

3040-01-305-9970
Rigid Connecting Link

013059970
12299025-12: RNCC: 3 | RNVC: 2
10398702: RNCC: 6 | RNVC: 9
12299025: RNCC: D | RNVC: 9

15 Aug 1989

3040-01-305-9926
Manual Control Lever

013059926
ZPC1000213: RNCC: 3 | RNVC: 2
ZPC1000213: RNCC: 5 | RNVC: 9

15 Aug 1989

3040-01-305-9483
Counterbalance Weight

013059483
AF517B: RNCC: 3 | RNVC: 2

14 Aug 1989

3040-01-305-8061
Body Hub

013058061
5-16-1116-00-03R: RNCC: 3 | RNVC: 2
N-1190-A PIECE 51: RNCC: 5 | RNVC: 9
1612NS: RNCC: 5 | RNVC: 9
N-1190-A: RNCC: D | RNVC: 9

11 Aug 1989

3040-01-305-8009
Linear Actuating Cylinder

013058009
B-1501-FC-1: RNCC: 3 | RNVC: 2
B-1501-FC: RNCC: 5 | RNVC: 9

11 Aug 1989

3040-01-305-7994
Linear Actuating Cylinder Piston Rod

013057994
B-1504-1: RNCC: 3 | RNVC: 2
B-1504: RNCC: 5 | RNVC: 9

11 Aug 1989

3040-01-305-5884
Linear Actuating Cylinder Assembly

013055884
6531-TA: RNCC: 3 | RNVC: 2
8606S231: RNCC: 5 | RNVC: 2
8606S231: RNCC: 5 | RNVC: 9
8606S231: RNCC: 7 | RNVC: 2

8 Aug 1989

3040-01-305-5734
Helical Gearshaft

013055734
3029687: RNCC: 3 | RNVC: 2

8 Aug 1989

3040-01-305-5678
Straight Shaft

013055678
11076: RNCC: 3 | RNVC: 2

8 Aug 1989

3040-01-323-1750
Straight Shaft

013231750
980385-00: RNCC: 3 | RNVC: 2
980385-00: RNCC: 3 | RNVC: 9
RY-180210PC3: RNCC: 5 | RNVC: 2
RY-180210PC3: RNCC: 5 | RNVC: 9

23 Jul 1990

3040-01-305-3660
Linear Actuating Cylinder Head

013053660
A-1503: RNCC: 3 | RNVC: 2

4 Aug 1989

3040-01-305-3659
Linear Actuating Cylinder Head

013053659
A-SR-1502: RNCC: 3 | RNVC: 2

4 Aug 1989

3040-01-304-8365
Shaft Retaining Plate

013048365
8J1362: RNCC: 3 | RNVC: 2

27 Jul 1989

3040-01-304-5913
Straight Shaft

013045913
527205: RNCC: 3 | RNVC: 2
527205: RNCC: 5 | RNVC: 2

20 Jul 1989

3040-01-304-4597
Rotating Shaft Eye Bracket

013044597
827241-1: RNCC: 3 | RNVC: 2
827241-1: RNCC: 3 | RNVC: 9

19 Jul 1989

3040-01-304-4599
Rigid Connecting Link

013044599
203683: RNCC: 3 | RNVC: 2

19 Jul 1989

3040-01-304-2273
Linear Actuating Cylinder Assembly

013042273
419 615 70 34: RNCC: 3 | RNVC: 2

14 Jul 1989

3040-01-303-6448
Rigid Connecting Link

013036448
94912-991: RNCC: 3 | RNVC: 9
6850001-385: RNCC: 5 | RNVC: 9
6850001: RNCC: D | RNVC: 9

4 Jul 1989

3040-01-303-5758
Mechanical Drive Housing

013035758
126 270 47 05: RNCC: 3 | RNVC: 2
94283-991: RNCC: 3 | RNVC: 9
126 270 47 05: RNCC: 5 | RNVC: 9
4538742-686: RNCC: 5 | RNVC: 9
4538742: RNCC: D | RNVC: 9

1 Jul 1989

3040-01-303-4886
Linear Actuating Cylinder Cap

013034886
160-6309: RNCC: 3 | RNVC: 2
8J9013: RNCC: 5 | RNVC: 9

30 Jun 1989

3040-01-303-3240
Mechanical Drive Housing

013033240
2V4462: RNCC: 3 | RNVC: 2

28 Jun 1989

3040-01-303-0090
Rigid Connecting Link

013030090
103 200 01 14: RNCC: 3 | RNVC: 2
4538741-714: RNCC: 3 | RNVC: 9
103 200 01 14: RNCC: 5 | RNVC: 9
4538741: RNCC: D | RNVC: 9

23 Jun 1989

3040-01-302-7644
Shaft Retaining Plate

013027644
4538742-610: RNCC: 3 | RNVC: 2
102 032 06 06: RNCC: 3 | RNVC: 2
102 032 06 06: RNCC: 5 | RNVC: 9
4538742-610: RNCC: 5 | RNVC: 9
94212-991: RNCC: 5 | RNVC: 9

19 Jun 1989

3040-01-302-7642
Bell Crank

013027642
353 7615-801: RNCC: 3 | RNVC: 2
92041-991: RNCC: 3 | RNVC: 9
92041-991: RNCC: 5 | RNVC: 9
3537615-801: RNCC: 5 | RNVC: 9
3537615: RNCC: D | RNVC: 9

19 Jun 1989

3040-01-302-6663
Linear Actuating Cylinder Assembly

013026663
675548: RNCC: 3 | RNVC: 2
4C675548: RNCC: 5 | RNVC: 2
675548: RNCC: 5 | RNVC: 2

17 Jun 1989

3040-01-318-0246
Linear Actuating Cylinder

013180246
24586: RNCC: 3 | RNVC: 2

11 Apr 1990

3040-01-302-3025
Spur Gearshaft

013023025
94239-991: RNCC: 3 | RNVC: 9
1262701743: RNCC: 5 | RNVC: 2
1262704043: RNCC: 5 | RNVC: 9
1262701743: RNCC: 5 | RNVC: 9
4538742-640: RNCC: 5 | RNVC: 9

13 Jun 1989

3040-01-302-2994
Shouldered Shaft

013022994
22086: RNCC: 3 | RNVC: 2

13 Jun 1989

3040-01-302-2992
Shouldered Shaft

013022992
4538742-707: RNCC: 3 | RNVC: 2
4538742-707: RNCC: 5 | RNVC: 2
126 278 0310: RNCC: 5 | RNVC: 2
126 278 0310: RNCC: 5 | RNVC: 9
126 278 02 10: RNCC: 5 | RNVC: 9
94303-991: RNCC: 5 | RNVC: 9
4538742-707: RNCC: 5 | RNVC: 9

13 Jun 1989

3040-01-302-2577
Linear Actuating Cylinder

013022577
12546858: RNCC: 3 | RNVC: 2
15577710: RNCC: 5 | RNVC: 9
12546858: RNCC: 5 | RNVC: 9

10 Jun 1989

3040-01-302-2501
Shaft Idler

013022501
GS-2096: RNCC: 3 | RNVC: 2
GS-2094: RNCC: 5 | RNVC: 2

10 Jun 1989

3040-01-302-2491
Brake Band And Lining

013022491
94210-991: RNCC: 3 | RNVC: 9
1262701562: RNCC: 5 | RNVC: 2
1262701562: RNCC: 5 | RNVC: 9
126 270 14 62: RNCC: 5 | RNVC: 9
4538742-608: RNCC: 5 | RNVC: 9

10 Jun 1989

3040-01-302-2482
Shouldered Shaft

013022482
601 075 01 05: RNCC: 3 | RNVC: 2
93900-991: RNCC: 3 | RNVC: 9
601 075 01 05: RNCC: 5 | RNVC: 9
4538741-099: RNCC: 5 | RNVC: 9

10 Jun 1989

3040-01-302-2473
Nonrotating Shaft Eye Bracket

013022473
91249-991: RNCC: 3 | RNVC: 9
2536473-801: RNCC: 5 | RNVC: 2
2536473-801: RNCC: 5 | RNVC: 9
2536473-801: RNCC: 5 | RNVC: 9
477-7298: RNCC: 6 | RNVC: 9
91249-991: RNCC: C | RNVC: 1

10 Jun 1989

3040-01-302-2474
Remote Control Lever

013022474
93993-991: RNCC: 3 | RNVC: 9
603 070 29 21: RNCC: 5 | RNVC: 2
4538741-247: RNCC: 5 | RNVC: 9

10 Jun 1989

3040-01-302-0473
Spur Gearshaft

013020473
94215-991: RNCC: 3 | RNVC: 9
126 270 38 15: RNCC: 5 | RNVC: 2
126 270 38 15: RNCC: 5 | RNVC: 9
126 270 38 15: RNCC: 5 | RNVC: 9
126 270 22 15: RNCC: 5 | RNVC: 9
4538742-614: RNCC: 5 | RNVC: 9

8 Jun 1989

3040-01-301-9988
Remote Control Lever

013019988
722 270 00 56: RNCC: 3 | RNVC: 2
94438-991: RNCC: 3 | RNVC: 9
453 8742-859: RNCC: 5 | RNVC: 2
4538742-859: RNCC: 5 | RNVC: 9
722 270 00 56: RNCC: 5 | RNVC: 9

7 Jun 1989

3040-01-301-9990
Shaft Retaining Plate

013019990
453 8742-611: RNCC: 3 | RNVC: 2
94213-991: RNCC: 3 | RNVC: 9
720 272 00 45: RNCC: 5 | RNVC: 9
4538742-611: RNCC: 5 | RNVC: 9

7 Jun 1989

3040-01-301-9986
Body Hub

013019986
94187-991: RNCC: 3 | RNVC: 9
1040300008: RNCC: 5 | RNVC: 2
1040300008: RNCC: 5 | RNVC: 2
1040300008: RNCC: 5 | RNVC: 2
1040300008: RNCC: 5 | RNVC: 2
1040300008: RNCC: 5 | RNVC: 9
1040300008: RNCC: 5 | RNVC: 9
4538741-783: RNCC: 5 | RNVC: 9

7 Jun 1989

3040-01-301-8427
Rigid Connecting Link

013018427
94003-991: RNCC: 3 | RNVC: 9
001 070 52 75: RNCC: 5 | RNVC: 2
001 070 52 75: RNCC: 5 | RNVC: 9
000 070 87 75: RNCC: 5 | RNVC: 9
4538741-257: RNCC: 5 | RNVC: 9

4 Jun 1989

3040-01-301-8428
Remote Control Lever

013018428
4538741-249: RNCC: 3 | RNVC: 2
603 070 33 21: RNCC: 3 | RNVC: 2
93995-991: RNCC: 3 | RNVC: 9
603 070 33 21: RNCC: 5 | RNVC: 9
4538741-249: RNCC: 5 | RNVC: 9

4 Jun 1989

3040-01-301-8101
Bell Crank

013018101
11671047: RNCC: 3 | RNVC: 2

3 Jun 1989

3040-01-301-8105
Rigid Connecting Link

013018105
1544404: RNCC: 3 | RNVC: 2
1544404: RNCC: 5 | RNVC: 9

3 Jun 1989

3040-01-301-8064
Spur Gearshaft

013018064
08001: RNCC: 3 | RNVC: 2

3 Jun 1989

3040-01-316-4171
Straight Shaft

013164171
6829067: RNCC: 3 | RNVC: 2

8 Mar 1990

3040-01-301-2946
Straight Shaft

013012946
07991: RNCC: 3 | RNVC: 2

26 May 1989

3040-01-301-0401
Linear Actuating Cylinder Assembly

013010401
F2981: RNCC: 3 | RNVC: 2
735134-1: RNCC: 5 | RNVC: 2
735134: RNCC: D | RNVC: 9

23 May 1989

3040-01-300-8545
Linear Actuating Cylinder Assembly Parts Kit

013008545
MA11475-A: RNCC: 3 | RNVC: 2

19 May 1989

3040-01-300-4675
Extension Shaft

013004675
384-0837-00: RNCC: 3 | RNVC: 2

14 May 1989

3040-01-300-3349
Mechanical Drive Housing

013003349
2002148-2: RNCC: 3 | RNVC: 2

12 May 1989

3040-01-300-0146
Shouldered Shaft

013000146
5189914: RNCC: 3 | RNVC: 2
5189914: RNCC: D | RNVC: 9

9 May 1989

3040-01-299-8826
Linear Actuating Cylinder Piston Rod

012998826
G109187: RNCC: 3 | RNVC: 2
G109187: RNCC: 5 | RNVC: 2

7 May 1989

3040-01-299-8793
Linear Actuating Cylinder Assembly Parts Kit

012998793
190-140: RNCC: 3 | RNVC: 9

7 May 1989

3040-01-299-8525
Body Hub

012998525
0810290122: RNCC: 3 | RNVC: 2
081029198: RNCC: 5 | RNVC: 9
081029122: RNCC: 5 | RNVC: 9
081029134: RNCC: 5 | RNVC: 9

7 May 1989

3040-01-313-8016
Straight Shaft

013138016
11-1-3724: RNCC: 3 | RNVC: 2

18 Jan 1990

3040-01-298-9488
Brake Disc

012989488
25199: RNCC: 3 | RNVC: 2

23 Apr 1989

3040-01-298-8750
Rigid Connecting Link

012988750
15692-14: RNCC: 3 | RNVC: 2
15692: RNCC: D | RNVC: 9

22 Apr 1989

3040-01-298-5465
Shaft Retaining Plate

012985465
23045507: RNCC: 3 | RNVC: 2
2AG318: RNCC: C | RNVC: 1
6882609: RNCC: C | RNVC: 1

18 Apr 1989

3040-01-298-5313
Straight Shaft

012985313
1W1880: RNCC: 3 | RNVC: 2

18 Apr 1989

3040-01-298-4326
Linear Actuating Cylinder Piston

012984326
867 1559: RNCC: 3 | RNVC: 2

16 Apr 1989

3040-01-298-4280
Linear Actuating Cylinder

012984280
867 1508: RNCC: 3 | RNVC: 2

16 Apr 1989

3040-01-312-9043
Linear Actuating Cylinder Assembly

013129043
268020: RNCC: 3 | RNVC: 9
268020: RNCC: 5 | RNVC: 9
268020: RNCC: C | RNVC: 1
268020: RNCC: C | RNVC: 1

23 Dec 1989

3040-01-298-3797
Rigid Connecting Link

012983797
500202: RNCC: 3 | RNVC: 9

14 Apr 1989

3040-01-298-3299
Shaft Retaining Plate

012983299
51489: RNCC: 3 | RNVC: 2

14 Apr 1989

3040-01-298-2315
Rigid Connecting Link

012982315
5190819: RNCC: 3 | RNVC: 2
5190819: RNCC: 5 | RNVC: 2

13 Apr 1989

3040-01-297-9249
Hydraulic Accumulator

012979249
011-2400: RNCC: 3 | RNVC: 9
000-0999: RNCC: 5 | RNVC: 9
000-2400: RNCC: C | RNVC: 1

8 Apr 1989

3040-01-297-9232
Ball Joint

012979232
3225-9053-0: RNCC: 3 | RNVC: 2
00661710: RNCC: 5 | RNVC: 9
008813622: RNCC: 5 | RNVC: 9
00813622: RNCC: 5 | RNVC: 9

8 Apr 1989

3040-01-297-8403
Mechanical Drive Housing

012978403
3507633: RNCC: 3 | RNVC: 2

7 Apr 1989

3040-01-297-7307
Remote Control Lever

012977307
4E3455: RNCC: 3 | RNVC: 2
6W5795: RNCC: 5 | RNVC: 9

6 Apr 1989

3040-01-297-7280
Bevel Gearshaft

012977280
6N4165: RNCC: 3 | RNVC: 2
9N3326 ITEM 20: RNCC: C | RNVC: 1

6 Apr 1989

3040-01-297-7283
Mechanical Drive Housing

012977283
3P3735: RNCC: 3 | RNVC: 2

6 Apr 1989

3040-01-297-7282
Spur Gearshaft

012977282
8N1628: RNCC: 3 | RNVC: 2

6 Apr 1989

3040-01-297-5617
Flexible Shaft Assembly

012975617
6N9040: RNCC: 3 | RNVC: 2
7N6852 ITEM 32: RNCC: C | RNVC: 1

4 Apr 1989

3040-01-297-5591
Remote Control Lever

012975591
5F2708: RNCC: 3 | RNVC: 2

4 Apr 1989

3040-01-297-4909
Shouldered Shaft

012974909
06011980P4: RNCC: 3 | RNVC: 2

4 Apr 1989

3040-01-297-4613
Manual Control Lever

012974613
3908765: RNCC: 3 | RNVC: 2

4 Apr 1989

3040-01-297-2649
Rigid Connecting Link

012972649
4330414: RNCC: 3 | RNVC: 2

31 Mar 1989

3040-01-297-2022
Ball Joint

012972022
A76747: RNCC: 3 | RNVC: 2
P1100: RNCC: 5 | RNVC: 9
P1100CP: RNCC: 5 | RNVC: 9

30 Mar 1989

3040-01-297-1632
Push-Pull Control Assembly

012971632
5A0152: RNCC: 3 | RNVC: 2
845031A7011: RNCC: 3 | RNVC: 2
36342700: RNCC: 5 | RNVC: 2
78088: RNCC: 5 | RNVC: 9
78088: RNCC: 5 | RNVC: 9
078088: RNCC: 5 | RNVC: 9

29 Mar 1989

3040-01-297-0275
Straight Shaft

012970275
324 1133 001: RNCC: 3 | RNVC: 2
324 9120 075 ITEM 36: RNCC: 5 | RNVC: 2
16KP542: RNCC: 5 | RNVC: 2
16KP542: RNCC: 5 | RNVC: 9
324 9120 075: RNCC: D | RNVC: 9

27 Mar 1989

3040-01-297-0274
Shouldered Shaft

012970274
4002571: RNCC: 3 | RNVC: 2

27 Mar 1989

3040-01-296-9369
Spur Gearshaft

012969369
3P0377: RNCC: 3 | RNVC: 2
3P377: RNCC: D | RNVC: 9

25 Mar 1989

3040-01-296-9330
Shouldered Shaft

012969330
5187160: RNCC: 3 | RNVC: 2
5187160: RNCC: D | RNVC: 9

25 Mar 1989

3040-01-296-7406
Linear Actuating Cylinder

012967406
10524242: RNCC: 3 | RNVC: 2
351-9325: RNCC: 5 | RNVC: 9

23 Mar 1989

3040-01-296-6170
Mechanical Drive Housing

012966170
12909118: RNCC: 3 | RNVC: 2

23 Mar 1989

3040-01-296-4848
Rigid Connecting Link

012964848
446306C91: RNCC: 3 | RNVC: 2
446306C92: RNCC: 3 | RNVC: 2

21 Mar 1989

3040-01-296-2303
Flexible Drive Shaft

012962303
000207-1: RNCC: 3 | RNVC: 2

17 Mar 1989

3040-01-295-9825
Push-Pull Control Assembly

012959825
2V7617: RNCC: 3 | RNVC: 2
56-3331-2111: RNCC: 5 | RNVC: 9

14 Mar 1989

3040-01-295-9826
Push-Pull Control Assembly

012959826
1V6350: RNCC: 3 | RNVC: 2
56-3331-2096: RNCC: 5 | RNVC: 9

14 Mar 1989

3040-01-295-9749
Pot Mount Adapter

012959749
5186933: RNCC: 3 | RNVC: 2
5186933: RNCC: 5 | RNVC: 2

14 Mar 1989

3040-01-295-9737
Shouldered Shaft

012959737
9T6440: RNCC: 3 | RNVC: 2

14 Mar 1989

3040-01-295-9484
Linear Actuating Cylinder

012959484
43678B: RNCC: 3 | RNVC: 2
43678B: RNCC: 3 | RNVC: 9
12500-1H: RNCC: 5 | RNVC: 9
43678A: RNCC: 5 | RNVC: 9

14 Mar 1989

3040-01-295-7163
Flexible Shaft Assembly

012957163
9V3545: RNCC: 3 | RNVC: 2

10 Mar 1989

3040-01-295-2500
Shaft Collar

012952500
8S7625: RNCC: 3 | RNVC: 2

3 Mar 1989

3040-01-294-8636
Shouldered Shaft

012948636
20-R: RNCC: 3 | RNVC: 2

23 Feb 1989

3040-01-294-8189
Linear Actuating Cylinder Assembly

012948189
G110187: RNCC: 3 | RNVC: 2

23 Feb 1989

3040-01-294-7230
Hub Clamp

012947230
5189738-001: RNCC: 3 | RNVC: 1
5186926 PIECE 6 AND 7: RNCC: 3 | RNVC: 2
5186926-1: RNCC: 5 | RNVC: 9
5186925-1: RNCC: C | RNVC: 1
5186926: RNCC: D | RNVC: 9

22 Feb 1989

3040-01-294-7231
Hub Clamp

012947231
5189738-002: RNCC: 3 | RNVC: 1
5186925-2: RNCC: 3 | RNVC: 2
5186925: RNCC: D | RNVC: 9

22 Feb 1989

3040-01-294-6120
Linear Actuating Cylinder Assembly

012946120
915927: RNCC: 3 | RNVC: 2
741095: RNCC: 5 | RNVC: 9

18 Feb 1989

3040-01-294-6116
Linear Actuating Cylinder

012946116
5R8023: RNCC: 3 | RNVC: 2

18 Feb 1989

3040-01-294-5619
Remote Control Lever

012945619
91344-991: RNCC: 3 | RNVC: 9
2537074-801: RNCC: 5 | RNVC: 9

17 Feb 1989

3040-01-294-4947
Body Hub

012944947
239627: RNCC: 3 | RNVC: 2
N7378: RNCC: 5 | RNVC: 2
239627: RNCC: 5 | RNVC: 9

16 Feb 1989

3040-01-294-3244
Linear Actuating Cylinder Assembly

012943244
G110186: RNCC: 3 | RNVC: 2

15 Feb 1989

3040-01-294-2606
Remote Control Lever

012942606
E6TZ2A637A: RNCC: 3 | RNVC: 9

14 Feb 1989

3040-01-294-1705
Linear Actuating Cylinder Cap

012941705
TR15010: RNCC: 3 | RNVC: 2

11 Feb 1989

3040-01-294-1161
Push-Pull Control Assembly

012941161
A3006382-1: RNCC: 1 | RNVC: 2
A3006382: RNCC: 3 | RNVC: 2
A3006382-1: RNCC: 3 | RNVC: 2
A3006382: RNCC: 5 | RNVC: 9
A3006382: RNCC: D | RNVC: 9

10 Feb 1989

3040-01-293-9329
Electro-Hydraulic Brake

012939329
BA-84-SS-R-000: RNCC: 3 | RNVC: 2
BA-84-SS-R-000-HAGG: RNCC: 3 | RNVC: 9
BA-84-SS-R-000: RNCC: 5 | RNVC: 9
BA-84-SS-R-000: RNCC: 5 | RNVC: 9
BA-84-SS-R-000: RNCC: 5 | RNVC: 9

9 Feb 1989

3040-01-293-5776
Spur Gearshaft

012935776
2964708-1: RNCC: 3 | RNVC: 2

3 Feb 1989

3040-01-293-3492
Nonvehicular Propeller Shaft

012933492
4-3-1431X: RNCC: 3 | RNVC: 2
N13547: RNCC: 5 | RNVC: 2
877128R91: RNCC: 5 | RNVC: 2
N13547: RNCC: 5 | RNVC: 2

1 Feb 1989

3040-01-293-3499
Remote Control Lever

012933499
12352780-2: RNCC: 3 | RNVC: 2
12352780: RNCC: D | RNVC: 9
12352781: RNCC: D | RNVC: 9

1 Feb 1989

3040-01-292-6452
Mechanical Drive Housing

012926452
8350997: RNCC: 3 | RNVC: 2

20 Jan 1989

3040-01-292-5702
Shouldered Shaft

012925702
P105-1: RNCC: 3 | RNVC: 2

19 Jan 1989

3040-01-292-5660
Straight Shaft

012925660
0851-260: RNCC: 3 | RNVC: 2

19 Jan 1989

3040-01-292-1587
Straight Shaft

012921587
3198-D-30-S: RNCC: 3 | RNVC: 9
003165T: RNCC: 5 | RNVC: 2
3198-D-30: RNCC: 5 | RNVC: 2
N8158: RNCC: 5 | RNVC: 2
3198-D-30: RNCC: 5 | RNVC: 2
N8400: RNCC: D | RNVC: 9

11 Jan 1989

3040-01-291-9688
Manual Control Lever

012919688
30J4401: RNCC: 3 | RNVC: 2

9 Jan 1989

3040-01-291-9631
Cylinder Ball

012919631
2114397: RNCC: 3 | RNVC: 9

9 Jan 1989

3040-01-291-9617
Outboard Drive Unit Lock Brace

012919617
851403-6: RNCC: 3 | RNVC: 2

9 Jan 1989

3040-01-291-9583
Pivot Shaft Assembly

012919583
63720-1: RNCC: 3 | RNVC: 2
63720-1: RNCC: 5 | RNVC: 9
138406: RNCC: 5 | RNVC: 9
63720-2: RNCC: 5 | RNVC: 9
63720-1: RNCC: 5 | RNVC: 9

9 Jan 1989

3040-01-291-8690
Linear Actuating Cylinder Assembly

012918690
150-093: RNCC: 3 | RNVC: 9

6 Jan 1989

3040-01-291-8542
Shouldered Shaft

012918542
167-003: RNCC: 3 | RNVC: 9

6 Jan 1989

3040-01-291-5877
Spur Gearshaft

012915877
D37-120: RNCC: 3 | RNVC: 2

30 Dec 1988

3040-01-291-5792
Manual Control Lever

012915792
24012: RNCC: 3 | RNVC: 2
S24012: RNCC: 5 | RNVC: 9

30 Dec 1988

3040-01-291-5305
Remote Control Lever

012915305
419 300 01 25: RNCC: 3 | RNVC: 2

29 Dec 1988

3040-01-290-9126
Mechanical Drive Housing

012909126
10500606: RNCC: 3 | RNVC: 2
10500606: RNCC: C | RNVC: 1

19 Dec 1988

3040-01-290-6757
Rigid Connecting Link

012906757
12341663: RNCC: 3 | RNVC: 2
5598309: RNCC: 5 | RNVC: 9

15 Dec 1988

3040-01-290-6558
Rigid Connecting Link

012906558
9501M79G05: RNCC: 3 | RNVC: 2

14 Dec 1988

3040-01-290-5071
Flexible Drive Shaft

012905071
7139-42A: RNCC: 3 | RNVC: 2

12 Dec 1988

3040-01-290-3583
Straight Shaft

012903583
8644848-1: RNCC: 3 | RNVC: 2
8644848-1: RNCC: 5 | RNVC: 2
8644848-1: RNCC: 5 | RNVC: 9

9 Dec 1988

3040-01-289-8250
Linear Actuating Cylinder Assembly

012898250
6607534: RNCC: 3 | RNVC: 2
6607534: RNCC: 5 | RNVC: 9

1 Dec 1988

3040-01-289-5439
Control Cam

012895439
841185: RNCC: 3 | RNVC: 2

25 Nov 1988

3040-01-289-5381
Manual Control Lever

012895381
3823609: RNCC: 3 | RNVC: 2
ST-1193: RNCC: 5 | RNVC: 9

25 Nov 1988

3040-01-289-4281
Linear Actuating Cylinder Assembly

012894281
6600364: RNCC: 3 | RNVC: 2
6600364: RNCC: 5 | RNVC: 9

22 Nov 1988

3040-01-289-3928
Rigid Connecting Link

012893928
5127418: RNCC: 3 | RNVC: 2

22 Nov 1988

3040-01-289-3778
Mechanical Drive Housing

012893778
6-547-000082: RNCC: 3 | RNVC: 2

22 Nov 1988

3040-01-289-1101
Pawl

012891101
9051-826-2: RNCC: 3 | RNVC: 9
9051-826-2: RNCC: 5 | RNVC: 9

17 Nov 1988

3040-01-288-9840
Rigid Connecting Link

012889840
507 7427B 000: RNCC: 3 | RNVC: 2
SW26657: RNCC: 5 | RNVC: 2
SW25244: RNCC: 5 | RNVC: 9

17 Nov 1988

3040-01-299-3945
Straight Shaft

012993945
15-7701-B: RNCC: 3 | RNVC: 9
15-7701-B: RNCC: C | RNVC: 1

30 Apr 1989

3040-01-287-9734
Straight Shaft

012879734
3050396: RNCC: 3 | RNVC: 2

29 Oct 1988

3040-01-287-9131
Shouldered Shaft

012879131
481-200417: RNCC: 3 | RNVC: 2
481-200417: RNCC: 5 | RNVC: 2
481-200417: RNCC: 5 | RNVC: 9

29 Oct 1988

3040-01-287-8953
Helical Gearshaft

012878953
800-212: RNCC: 3 | RNVC: 2

28 Oct 1988

3040-01-287-8958
Manual Control Lever

012878958
52078289: RNCC: 3 | RNVC: 2
4294851: RNCC: 5 | RNVC: 9
4383725: RNCC: 5 | RNVC: 9
4294851: RNCC: 5 | RNVC: 9
52078289: RNCC: 5 | RNVC: 9

28 Oct 1988

3040-01-287-7953
Ball Joint

012877953
A031799-001: RNCC: 3 | RNVC: 2
A031799-001: RNCC: 5 | RNVC: 9

27 Oct 1988

3040-01-287-7882
Mechanical Drive Housing

012877882
P49-2: RNCC: 3 | RNVC: 2

27 Oct 1988

3040-01-287-7889
Linear Actuating Cylinder Piston Rod

012877889
00241-0150-05: RNCC: 3 | RNVC: 2
00241-0150-05: RNCC: 3 | RNVC: 9
00241-0150-05: RNCC: 5 | RNVC: 9

27 Oct 1988

3040-01-287-4759
Linear Actuating Cylinder Piston

012874759
SM-C-773561: RNCC: 3 | RNVC: 2

22 Oct 1988

3040-01-287-4714
Shouldered Shaft

012874714
5212244: RNCC: 3 | RNVC: 2
5212244: RNCC: 5 | RNVC: 2

22 Oct 1988

3040-01-287-4450
Shouldered Shaft

012874450
20030166: RNCC: 3 | RNVC: 2
20718116: RNCC: 5 | RNVC: 9

22 Oct 1988

3040-01-287-4175
Push-Pull Control Assembly

012874175
B2260-12: RNCC: 3 | RNVC: 2
C-4482: RNCC: D | RNVC: 9

21 Oct 1988

3040-01-287-4046
Straight Shaft

012874046
D1-1763: RNCC: 3 | RNVC: 2
RB-018-006: RNCC: 5 | RNVC: 9

21 Oct 1988

3040-01-287-0709
Remote Control Lever

012870709
31002-001: RNCC: 3 | RNVC: 2
31002-001: RNCC: 3 | RNVC: 9

14 Oct 1988

3040-01-286-9382
Straight Shaft

012869382
10200102: RNCC: 3 | RNVC: 2

12 Oct 1988

3040-01-286-8544
Manual Control Lever

012868544
4186954: RNCC: 3 | RNVC: 2
4186954: RNCC: C | RNVC: 1

9 Oct 1988

3040-01-286-4881
Control Cam

012864881
4W8140: RNCC: 3 | RNVC: 2

2 Oct 1988

3040-01-286-4534
Shouldered Shaft

012864534
DU-316: RNCC: 3 | RNVC: 2
DU-316: RNCC: 5 | RNVC: 9

1 Oct 1988

3040-01-286-3246
Straight Shaft

012863246
D1-2001: RNCC: 3 | RNVC: 2

30 Sep 1988

3040-01-286-2388
Push-Pull Control Assembly

012862388
D038038-003-0192C: RNCC: 3 | RNVC: 2
D038038-003-0192: RNCC: 5 | RNVC: 9
38038-003-0192: RNCC: 5 | RNVC: 9

28 Sep 1988

3040-01-286-0360
Remote Control Lever

012860360
8V1624: RNCC: 3 | RNVC: 2

24 Sep 1988

3040-01-286-0323
Manual Control Lever

012860323
280149: RNCC: 3 | RNVC: 2
280149: RNCC: 5 | RNVC: 2

24 Sep 1988

Load More Results