What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 150 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 150 of 300

3040-01-452-7060
Shouldered Shaft

014527060
82-2740880-1: RNCC: 3 | RNVC: 2

4 Feb 1998

3040-01-560-6892
Brake Drum

015606892
135704: RNCC: 3 | RNVC: 2
56404: RNCC: 5 | RNVC: 2

8 Feb 2008

3040-01-560-5013
Counterbalance Weight

015605013
558-6327: RNCC: 3 | RNVC: 2
2802878: RNCC: 3 | RNVC: 9

1 Feb 2008

3040-01-452-1653
Multiple Gears Gearshaft

014521653
323 2920 230: RNCC: 3 | RNVC: 2

20 Jan 1998

3040-01-559-6990
Shaft Collar

015596990
400-7661648 ITEM 32: RNCC: 3 | RNVC: 2

2 Jan 2008

3040-01-451-6027
Shouldered Shaft

014516027
21371-006: RNCC: 3 | RNVC: 2
162X75503: RNCC: 5 | RNVC: 2

22 Dec 1997

3040-01-450-2507
Body Hub

014502507
1542196-9: RNCC: 3 | RNVC: 2
1542196-9: RNCC: 5 | RNVC: 2
1542196-9: RNCC: 5 | RNVC: 2
1542196-9: RNCC: 5 | RNVC: 9
1542196: RNCC: D | RNVC: 9

31 Oct 1997

3040-01-450-2504
Mechanical Drive Housing

014502504
838655-9: RNCC: 3 | RNVC: 2
838655-9: RNCC: 5 | RNVC: 2
838655-9: RNCC: 5 | RNVC: 9

31 Oct 1997

3040-01-556-1699
Shaft Retaining Plate

015561699
7-318000075-001: RNCC: 3 | RNVC: 2

26 Sep 2007

3040-01-449-5930
Nonrotating Shaft Eye Bracket

014495930
1W-1952: RNCC: 3 | RNVC: 2
9Y6546 IT 43: RNCC: 5 | RNVC: 2
9Y6546: RNCC: D | RNVC: 9

7 Oct 1997

3040-01-449-5902
Hub Clamp

014495902
7E-4392: RNCC: 3 | RNVC: 2

7 Oct 1997

3040-01-449-4345
Guide Vane Lever

014494345
1834M58G02: RNCC: 3 | RNVC: 2
KT 1834M58G02: RNCC: 5 | RNVC: 2
KT 1834M58G02: RNCC: 5 | RNVC: 9

1 Oct 1997

3040-01-449-4319
Cylinder Support

014494319
12009370: RNCC: 3 | RNVC: 2

1 Oct 1997

3040-01-449-4311
Cylinder Yoke Half

014494311
12009374: RNCC: 3 | RNVC: 2

1 Oct 1997

3040-01-449-4296
Cylinder Yoke Half

014494296
12009373: RNCC: 3 | RNVC: 2

1 Oct 1997

3040-01-449-4301
Cylinder Suppo Yoke

014494301
12009371: RNCC: 3 | RNVC: 2

1 Oct 1997

3040-01-449-4232
Cylinder Yoke Half

014494232
12009372: RNCC: 3 | RNVC: 2

1 Oct 1997

3040-01-449-4225
Cylinder Suppo Yoke

014494225
12009376: RNCC: 3 | RNVC: 2

1 Oct 1997

3040-01-449-4222
Cylinder Yoke Half

014494222
12009375: RNCC: 3 | RNVC: 2

1 Oct 1997

3040-01-449-3671
Remote Control Lever

014493671
KC49117-501: RNCC: 3 | RNVC: 2
KC49117: RNCC: D | RNVC: 9

29 Sep 1997

3040-01-448-8858
Rigid Connecting Link

014488858
7579415-031: RNCC: 3 | RNVC: 2
7579515-031: RNCC: 3 | RNVC: 2
7579515-031: RNCC: 5 | RNVC: 2

12 Sep 1997

3040-01-448-4702
Ball Joint

014484702
83500202AB: RNCC: 3 | RNVC: 2
83500202: RNCC: 3 | RNVC: 9

29 Aug 1997

3040-01-448-1669
Push-Pull Control Assembly

014481669
307977-000-0066.0: RNCC: 3 | RNVC: 2
307977-000-0066.0: RNCC: 5 | RNVC: 9

22 Aug 1997

3040-01-553-4932
Nonaircraft Mechanical Actuator

015534932
0R-7973: RNCC: 3 | RNVC: 2
0R-7973: RNCC: 6 | RNVC: 9

17 Jul 2007

3040-01-553-3427
Housing Adapter

015533427
106133: RNCC: 3 | RNVC: 9
6062426ITEM28: RNCC: 5 | RNVC: 9
106133: RNCC: C | RNVC: 1
6062426ITEM28: RNCC: C | RNVC: 1
6062426ITEM28: RNCC: C | RNVC: 1
106133: RNCC: C | RNVC: 1

13 Jul 2007

3040-01-447-6870
Shouldered Shaft

014476870
6274060: RNCC: 3 | RNVC: 2
6274060: RNCC: 5 | RNVC: 9

12 Aug 1997

3040-01-447-5078
Detent Plate

014475078
915954: RNCC: 3 | RNVC: 9
915954: RNCC: 5 | RNVC: 2
915954: RNCC: 5 | RNVC: 9
915954: RNCC: 5 | RNVC: 9
323946: RNCC: 5 | RNVC: 9
323946: RNCC: 5 | RNVC: 9
323946: RNCC: 5 | RNVC: 9

8 Aug 1997

3040-01-447-5056
Ball Joint

014475056
E7TZ3049A: RNCC: 3 | RNVC: 9
E7TZ3049A: RNCC: 5 | RNVC: 9

8 Aug 1997

3040-01-447-4874
Body Hub

014474874
26-0402-82: RNCC: 3 | RNVC: 2

7 Aug 1997

3040-01-446-7532
Linear Actuating Cylinder Assembly

014467532
12466273: RNCC: 3 | RNVC: 2

16 Jul 1997

3040-01-446-6500
Shaft Collar

014466500
23056319: RNCC: 3 | RNVC: 2
23056319: RNCC: 5 | RNVC: 9
23056319: RNCC: 5 | RNVC: 9

11 Jul 1997

3040-01-446-6381
Linear Actuating Cylinder

014466381
106555: RNCC: 3 | RNVC: 9
106555: RNCC: 5 | RNVC: 2

11 Jul 1997

3040-01-446-6277
Piston Ring

014466277
GSN/B12071 0400: RNCC: 3 | RNVC: 2
B12071-0400: RNCC: 3 | RNVC: 9
B12071-4: RNCC: 5 | RNVC: 9
B12071-0400: RNCC: 5 | RNVC: 9
B12071: RNCC: D | RNVC: 9

11 Jul 1997

3040-01-446-6274
Piston Ring

014466274
B12071-0300: RNCC: 3 | RNVC: 2
B12071-0300: RNCC: 3 | RNVC: 9
MMU B12071 0300: RNCC: 5 | RNVC: 2
GSN B12071 0300: RNCC: 5 | RNVC: 2
B12071-3: RNCC: 5 | RNVC: 9
B12071: RNCC: D | RNVC: 9

11 Jul 1997

3040-01-446-4665
Piston Ring

014464665
B12071-0500: RNCC: 3 | RNVC: 2
B12071-0500: RNCC: 3 | RNVC: 9
GSN/B12071 0500: RNCC: 5 | RNVC: 2
B12071: RNCC: 5 | RNVC: 9
B12071-0500: RNCC: 5 | RNVC: 9
B12071: RNCC: D | RNVC: 9

3 Jul 1997

3040-01-446-3689
Manual Control Lever

014463689
31262: RNCC: 3 | RNVC: 2
31262: RNCC: 5 | RNVC: 9
5342PL0837564: RNCC: 6 | RNVC: 9

1 Jul 1997

3040-01-445-9262
Control Cam

014459262
T141837: RNCC: 3 | RNVC: 2
T116378: RNCC: 5 | RNVC: 9

17 Jun 1997

3040-01-445-6522
Straight Shaft

014456522
15519254: RNCC: 3 | RNVC: 2
15519254: RNCC: 5 | RNVC: 9

9 Jun 1997

3040-01-445-5671
Stroke Adjustment A

014455671
260236: RNCC: 3 | RNVC: 2

5 Jun 1997

3040-01-445-2760
Body Hub

014452760
12298887: RNCC: 3 | RNVC: 2
12298887: RNCC: 5 | RNVC: 9

28 May 1997

3040-01-444-9934
Worm Shaft

014449934
C379-03-06: RNCC: 3 | RNVC: 2

21 May 1997

3040-01-444-7839
Shouldered Shaft

014447839
28573: RNCC: 3 | RNVC: 2
28573: RNCC: 5 | RNVC: 9

16 May 1997

3040-01-444-5860
Linear Actuating Cylinder Assembly

014445860
112095: RNCC: 3 | RNVC: 2
112095: RNCC: 5 | RNVC: 2
106554SY: RNCC: 5 | RNVC: 9
106554SY: RNCC: 5 | RNVC: 9

12 May 1997

3040-01-444-3208
Shouldered Shaft

014443208
901-047-317-101: RNCC: 3 | RNVC: 2

5 May 1997

3040-01-444-3201
Spline Adapter

014443201
901-046-615-105: RNCC: 3 | RNVC: 2

5 May 1997

3040-01-444-1973
Counterbalance Weight

014441973
901-011-211-101: RNCC: 3 | RNVC: 2

1 May 1997

3040-01-443-9799
Remote Control Lever

014439799
1476AS232-2: RNCC: 3 | RNVC: 2
1476AS232-2: RNCC: 5 | RNVC: 2
1476AS232-2: RNCC: C | RNVC: 1

24 Apr 1997

3040-01-443-8499
Shouldered Shaft

014438499
1476AS212-1: RNCC: 3 | RNVC: 2
1476AS212-1: RNCC: 5 | RNVC: 2
1476AS212-1: RNCC: C | RNVC: 1

21 Apr 1997

3040-01-443-8498
Remote Control Lever

014438498
1476AS213-1: RNCC: 3 | RNVC: 2
1476AS213-1: RNCC: 5 | RNVC: 2
1476AS213-1: RNCC: C | RNVC: 1

21 Apr 1997

3040-01-443-3030
Tensioner Belt

014433030
53010158AC: RNCC: 3 | RNVC: 2
53010158AB: RNCC: 5 | RNVC: 9
53010158: RNCC: 5 | RNVC: 9
53010158: RNCC: 5 | RNVC: 9

7 Apr 1997

3040-01-443-1362
Linear Actuating Cylinder Piston

014431362
23046942: RNCC: 3 | RNVC: 2

2 Apr 1997

3040-01-443-1348
Shouldered Shaft

014431348
C9248-1: RNCC: 3 | RNVC: 2
9248-1: RNCC: 5 | RNVC: 2

2 Apr 1997

3040-01-443-0863
Shaft Retaining Plate

014430863
5445-1: RNCC: 3 | RNVC: 2

1 Apr 1997

3040-01-442-9268
Body Hub

014429268
29506325: RNCC: 3 | RNVC: 2

27 Mar 1997

3040-01-442-4611
Shouldered Shaft

014424611
RCSK14772C: RNCC: 3 | RNVC: 2
30636-1: RNCC: 5 | RNVC: 2
RCSK14772: RNCC: 5 | RNVC: 9
30636: RNCC: D | RNVC: 9

14 Mar 1997

3040-01-442-3414
Rigid Connecting Link

014423414
2441-10: RNCC: 3 | RNVC: 2

12 Mar 1997

3040-01-442-3363
Mechanical Drive Housing

014423363
11733454: RNCC: 3 | RNVC: 2

12 Mar 1997

3040-01-441-3981
Turbocharger Clamping Plate

014413981
3532637: RNCC: 3 | RNVC: 9

11 Feb 1997

3040-01-543-1283
Nonaircraft Mechanical Actuator

015431283
MR-112-4814: RNCC: 3 | RNVC: 9

30 Aug 2006

3040-01-441-0436
Push-Pull Control Assembly

014410436
EMS4M8819: RNCC: 3 | RNVC: 2
D1501440 ITEM 4: RNCC: 5 | RNVC: 2

31 Jan 1997

3040-01-541-3824
Rotary Actuator

015413824
SM-1020-D-1-1/85-2/20-X012W: RNCC: 3 | RNVC: 1

26 Jun 2006

3040-01-541-3783
Rotary Actuator

015413783
SM-1120-N-1-0.6/100-3.909/5.85-S: RNCC: 3 | RNVC: 1

26 Jun 2006

3040-01-440-1525
Rigid Connecting Link

014401525
RE48813: RNCC: 3 | RNVC: 2
AT141988: RNCC: 5 | RNVC: 9

6 Jan 1997

3040-01-439-7626
Shouldered Shaft

014397626
105278: RNCC: 3 | RNVC: 9
105278: RNCC: 5 | RNVC: 2
105278: RNCC: 5 | RNVC: 2

18 Dec 1996

3040-01-540-5455
Belt-Chain Tension Adjusting Device

015405455
9C00351-1: RNCC: 3 | RNVC: 2
9C00351-1: RNCC: 5 | RNVC: 2
9C00351-1: RNCC: 5 | RNVC: 2

23 May 2006

3040-01-438-6077
Spline Adapter

014386077
7566625-001: RNCC: 3 | RNVC: 2
7566625: RNCC: D | RNVC: 9

13 Nov 1996

3040-01-438-0850
Straight Axle

014380850
2S0696: RNCC: 3 | RNVC: 2

30 Oct 1996

3040-01-438-0852
Straight Axle

014380852
2R0720: RNCC: 3 | RNVC: 2

30 Oct 1996

3040-01-437-8282
Shouldered Shaft

014378282
122-3214: RNCC: 3 | RNVC: 2

24 Oct 1996

3040-01-437-8043
Control Cam

014378043
65726: RNCC: 3 | RNVC: 2

24 Oct 1996

3040-01-437-7485
Rigid Connecting Link

014377485
7568800-011: RNCC: 3 | RNVC: 2

23 Oct 1996

3040-01-437-4677
Straight Shaft

014374677
1N-065A-Q031 NO 2.2: RNCC: 3 | RNVC: 2
1N-065A-Q031 NO 2.2: RNCC: 5 | RNVC: 9
1N-065A-Q031 NO 2.2: RNCC: 5 | RNVC: 9
1N-065A-Q031: RNCC: D | RNVC: 9

15 Oct 1996

3040-01-436-8701
Rotating Shaft Eye Bracket

014368701
12266513-1: RNCC: 3 | RNVC: 2
12266513-1: RNCC: 5 | RNVC: 9
12266513: RNCC: D | RNVC: 9

30 Sep 1996

3040-01-436-2093
Contact Tube

014362093
143371: RNCC: 3 | RNVC: 2
143371: RNCC: 3 | RNVC: 9
119-349: RNCC: 5 | RNVC: 9

13 Sep 1996

3040-01-435-3651
Counterbalance Weight

014353651
406-020-109-102: RNCC: 3 | RNVC: 2
406-020-109: RNCC: D | RNVC: 9

22 Aug 1996

3040-01-435-1425
Control Cable Assembly

014351425
1476662: RNCC: 3 | RNVC: 2

15 Aug 1996

3040-01-435-0478
Straight Shaft

014350478
60-004-4012: RNCC: 3 | RNVC: 2
60-006-5012: RNCC: D | RNVC: 9

13 Aug 1996

3040-01-435-0303
Rigid Connecting Link

014350303
5T7253: RNCC: 3 | RNVC: 2

12 Aug 1996

3040-01-435-0304
Rigid Connecting Link

014350304
5T7252: RNCC: 3 | RNVC: 2

12 Aug 1996

3040-01-435-0302
Rigid Connecting Link

014350302
5T7251: RNCC: 3 | RNVC: 2

12 Aug 1996

3040-01-532-0730
Linear Actuating Cylinder Piston Rod

015320730
2190937: RNCC: 3 | RNVC: 9

27 Jul 2005

3040-01-532-0682
Linear Actuating Cylinder

015320682
2190933: RNCC: 3 | RNVC: 9

27 Jul 2005

3040-01-531-5562
Linear Actuating Cylinder

015315562
2190932: RNCC: 3 | RNVC: 9

14 Jul 2005

3040-01-531-5545
Linear Actuating Cylinder

015315545
2190936: RNCC: 3 | RNVC: 9

14 Jul 2005

3040-01-531-5510
Rigid Connecting Link

015315510
78-236-14: RNCC: 3 | RNVC: 2

14 Jul 2005

3040-01-531-5173
Linear Actuating Cylinder

015315173
2190934: RNCC: 3 | RNVC: 9

13 Jul 2005

3040-01-528-6711
Linear Actuating Cylinder Piston Rod

015286711
2202067: RNCC: 3 | RNVC: 9

22 Mar 2005

3040-01-527-0074
Shaft Collar

015270074
B74189: RNCC: 3 | RNVC: 2

14 Jan 2005

3040-01-434-7398
Shaft Retaining Plate

014347398
60-018-0901: RNCC: 3 | RNVC: 2
60-006-5012 ITEM 4: RNCC: 5 | RNVC: 2
60-006-5012: RNCC: D | RNVC: 9

6 Aug 1996

3040-01-434-5593
Shouldered Shaft

014345593
60-004-1262: RNCC: 3 | RNVC: 2

1 Aug 1996

3040-01-434-5596
Straight Shaft

014345596
60-004-1272: RNCC: 3 | RNVC: 2

1 Aug 1996

3040-01-434-2463
Pawl

014342463
E8CR110-009: RNCC: 3 | RNVC: 2
E8CR110-009: RNCC: 5 | RNVC: 9

24 Jul 1996

3040-01-434-2135
Brake Disc

014342135
9903.1321: RNCC: 3 | RNVC: 2
BOF22108: RNCC: 5 | RNVC: 2

23 Jul 1996

3040-01-434-0717
Mechanical Drive Housing

014340717
12510609: RNCC: 3 | RNVC: 2
715509: RNCC: 5 | RNVC: 2

18 Jul 1996

3040-01-433-8148
Rigid Connecting Link

014338148
LK888: RNCC: 3 | RNVC: 2

11 Jul 1996

3040-01-433-8124
Rigid Connecting Link

014338124
17P2D4007-501: RNCC: 3 | RNVC: 2

11 Jul 1996

3040-01-433-6561
Rigid Connecting Link

014336561
42514: RNCC: 3 | RNVC: 2
800189 ITEM 21: RNCC: 5 | RNVC: 2
800189: RNCC: D | RNVC: 9

8 Jul 1996

3040-01-433-6215
Rigid Connecting Link

014336215
4660911-011: RNCC: 3 | RNVC: 2
4660911-011: RNCC: 3 | RNVC: 9
4660911-011: RNCC: 5 | RNVC: 2

5 Jul 1996

3040-01-432-8119
Linear Actuating Cylinder Head

014328119
TM27A06101: RNCC: 3 | RNVC: 2

13 Jun 1996

3040-01-522-6149
Nonaircraft Mechanical Actuator

015226149
8250-873: RNCC: 3 | RNVC: 2

5 Aug 2004

3040-01-522-4841
Straight Shaft

015224841
25933: RNCC: 3 | RNVC: 9
259933: RNCC: 5 | RNVC: 9

31 Jul 2004

3040-01-432-2744
Rigid Connecting Link

014322744
6009974-501: RNCC: 3 | RNVC: 2
A3255697: RNCC: 5 | RNVC: 2
A3255697: RNCC: 5 | RNVC: 2

31 May 1996

3040-01-521-9194
Special Yoke

015219194
820-4445730: RNCC: 3 | RNVC: 1
820-4445730: RNCC: 5 | RNVC: 2

12 Jul 2004

3040-01-432-0327
Shouldered Shaft

014320327
CW303.104: RNCC: 3 | RNVC: 9

23 May 1996

3040-01-431-7413
Remote Control Lever

014317413
7575127-001: RNCC: 3 | RNVC: 2
7575127-001: RNCC: 3 | RNVC: 2
7575127: RNCC: D | RNVC: 9

17 May 1996

3040-01-431-6609
Linear Actuating Cylinder

014316609
03-4887: RNCC: 3 | RNVC: 2
03-1929: RNCC: 5 | RNVC: 9

16 May 1996

3040-01-431-6595
Control Cam

014316595
68-03-10: RNCC: 3 | RNVC: 2
151-003-D-111-18A: RNCC: 5 | RNVC: 2
68-03-10: RNCC: 5 | RNVC: 9

16 May 1996

3040-01-431-3333
Rigid Connecting Link

014313333
70103-11009-102: RNCC: 3 | RNVC: 2
70103-11009: RNCC: D | RNVC: 9

10 May 1996

3040-01-519-8283
Sc Upper Ball Joint

015198283
63282: RNCC: 3 | RNVC: 9
63282: RNCC: 5 | RNVC: 2

4 May 2004

3040-01-517-8762
Rigid Connecting Link

015178762
A2972-2: RNCC: 3 | RNVC: 2

23 Feb 2004

3040-01-429-5352
Housing Adapter

014295352
7N7991: RNCC: 3 | RNVC: 2

12 Apr 1996

3040-01-429-5353
Shouldered Shaft

014295353
9Y4957: RNCC: 3 | RNVC: 2

12 Apr 1996

3040-01-429-3294
Shouldered Shaft

014293294
7C1128: RNCC: 3 | RNVC: 2
1W0798 IT42: RNCC: 5 | RNVC: 9
7W-1543 IT18: RNCC: 5 | RNVC: 9

9 Apr 1996

3040-01-429-0813
Shouldered Axle

014290813
4P-3538: RNCC: 3 | RNVC: 2

4 Apr 1996

3040-01-428-6408
Straight Shaft

014286408
9Y0558: RNCC: 3 | RNVC: 2

28 Mar 1996

3040-01-428-6358
Rigid Connecting Link

014286358
165-6076: RNCC: 3 | RNVC: 2
7C0812: RNCC: 5 | RNVC: 9

28 Mar 1996

3040-01-428-5726
Shouldered Shaft

014285726
029254-1: RNCC: 3 | RNVC: 2
029254-1: RNCC: 5 | RNVC: 9

28 Mar 1996

3040-01-428-5702
Bell Crank

014285702
026121-1: RNCC: 3 | RNVC: 2
026121-1: RNCC: 5 | RNVC: 9

28 Mar 1996

3040-01-428-5701
Straight Shaft

014285701
026104-1: RNCC: 3 | RNVC: 2
026104-1: RNCC: 5 | RNVC: 9

28 Mar 1996

3040-01-515-0805
Spur Gearshaft

015150805
251N5128-2: RNCC: 3 | RNVC: 2

14 Nov 2003

3040-01-514-2784
Adptr Aors Piston

015142784
820-6896279PC02B: RNCC: 3 | RNVC: 1
4820-LL-N01-K574: RNCC: 5 | RNVC: 1

22 Oct 2003

3040-01-426-2702
Rigid Connecting Link

014262702
901-011-420-101: RNCC: 3 | RNVC: 2

7 Mar 1996

3040-01-426-0362
Shouldered Shaft

014260362
9Y0539: RNCC: 3 | RNVC: 2

4 Mar 1996

3040-01-426-0305
Straight Shaft Assembly

014260305
9Y9346: RNCC: 3 | RNVC: 2

4 Mar 1996

3040-01-426-0306
Shouldered Shaft

014260306
9Y4934: RNCC: 3 | RNVC: 2

4 Mar 1996

3040-01-426-0303
Shouldered Shaft

014260303
9Y4933: RNCC: 3 | RNVC: 2

4 Mar 1996

3040-01-426-0266
Straight Shaft

014260266
106-9867: RNCC: 3 | RNVC: 2
106-9872 ITEM 3: RNCC: 5 | RNVC: 2
106-9872: RNCC: D | RNVC: 9

4 Mar 1996

3040-01-426-0261
Shouldered Shaft

014260261
106-9869: RNCC: 3 | RNVC: 2
106-9872 ITEM 2: RNCC: 5 | RNVC: 2
106-9872: RNCC: D | RNVC: 9

4 Mar 1996

3040-01-508-8964
As-B Adapter

015088964
209-3619: RNCC: 3 | RNVC: 2
209-3620 REF NO 2: RNCC: 5 | RNVC: 9

5 Jun 2003

3040-01-425-0985
Mechanically Actuated Spindle

014250985
715537: RNCC: 3 | RNVC: 2
715537: RNCC: 5 | RNVC: 2

12 Feb 1996

3040-01-424-9066
Shouldered Shaft

014249066
436235: RNCC: 3 | RNVC: 9
436235: RNCC: 5 | RNVC: 2
436235: RNCC: 5 | RNVC: 9
436235: RNCC: 5 | RNVC: 9
435769: RNCC: C | RNVC: 1

7 Feb 1996

3040-01-424-9065
Remote Control Lever

014249065
322938: RNCC: 3 | RNVC: 2
322938: RNCC: 5 | RNVC: 9
322938: RNCC: 5 | RNVC: 9
322938: RNCC: 5 | RNVC: 9

7 Feb 1996

3040-01-424-8208
Multiple Disk Brake

014248208
3CWC-141440-CCC: RNCC: 3 | RNVC: 2
235378: RNCC: 5 | RNVC: 2
3CWC-141440-CCW: RNCC: 5 | RNVC: 9
13-602-022: RNCC: C | RNVC: 1

6 Feb 1996

3040-01-424-6232
Shouldered Shaft

014246232
5H66-562: RNCC: 3 | RNVC: 2
5H66-562: RNCC: 5 | RNVC: 2

1 Feb 1996

3040-01-424-3664
Linear Actuating Cylinder Assembly

014243664
5424081: RNCC: 3 | RNVC: 2

26 Jan 1996

3040-01-424-2875
Shouldered Shaft

014242875
1427AS123-1: RNCC: 3 | RNVC: 2

25 Jan 1996

3040-01-424-2872
Shouldered Shaft

014242872
1427AS114-1: RNCC: 3 | RNVC: 2

25 Jan 1996

3040-01-424-2214
Rigid Connecting Link

014242214
M903T: RNCC: 3 | RNVC: 2
M903T: RNCC: 5 | RNVC: 2

24 Jan 1996

3040-01-424-2168
Shouldered Shaft

014242168
7-0110-01: RNCC: 3 | RNVC: 2
CA16371 IT-7: RNCC: 5 | RNVC: 2
PL 4013CRSP-1 IT-7: RNCC: 5 | RNVC: 2
CA16371: RNCC: D | RNVC: 9

24 Jan 1996

3040-01-424-2158
Straight Shaft

014242158
83-004-1031: RNCC: 3 | RNVC: 2
CE100-C1-B2-26 PC-7: RNCC: 5 | RNVC: 2

24 Jan 1996

3040-01-424-1182
Mechanical Drive Housing

014241182
6769044: RNCC: 3 | RNVC: 2
6769044: RNCC: 5 | RNVC: 2

21 Jan 1996

3040-01-423-6536
Rigid Connecting Link

014236536
13227E7198: RNCC: 3 | RNVC: 2

5 Jan 1996

3040-01-423-6499
Shouldered Shaft

014236499
304919: RNCC: 3 | RNVC: 2
304919: RNCC: 5 | RNVC: 9

5 Jan 1996

3040-01-505-8765
Rigid Connecting Link

015058765
74A672423-2003: RNCC: 3 | RNVC: 2
74A672423-2003: RNCC: 5 | RNVC: 2
74A672423-2003: RNCC: 5 | RNVC: 9
74A672423 REV C: RNCC: D | RNVC: 9

18 Mar 2003

3040-01-423-2863
Manual Control Lever Assembly

014232863
SS-51K-63BK: RNCC: 3 | RNVC: 2
SS-51K-63BK: RNCC: 5 | RNVC: 9

20 Dec 1995

3040-01-423-1781
Control Cable Assembly

014231781
A3070151: RNCC: 1 | RNVC: 2
130-032-682: RNCC: 3 | RNVC: 2
130-032: RNCC: 5 | RNVC: 1
130-032-682: RNCC: 5 | RNVC: 9

18 Dec 1995

3040-01-422-6515
Manual Control Lever

014226515
12437105-1: RNCC: 3 | RNVC: 2

7 May 2002

3040-01-422-5616
Mechanical Drive Housing

014225616
1339AS1162-1: RNCC: 3 | RNVC: 2

4 Dec 1995

3040-01-422-2861
Shouldered Shaft

014222861
3353AS244-1: RNCC: 3 | RNVC: 2
3353AS244-1: RNCC: 5 | RNVC: 2
3353AS244: RNCC: D | RNVC: 9

28 Nov 1995

3040-01-422-2306
Rotor Guide

014222306
4D07385-004: RNCC: 3 | RNVC: 2
1942E07 FIND 7: RNCC: 5 | RNVC: 2
4D07385-004: RNCC: C | RNVC: 1
4D07385: RNCC: D | RNVC: 9
1942E07: RNCC: D | RNVC: 9

27 Nov 1995

3040-01-421-8825
Spur Gearshaft

014218825
3353AS240-1: RNCC: 3 | RNVC: 2
3353AS240-1: RNCC: 5 | RNVC: 2
3353AS240: RNCC: D | RNVC: 9

16 Nov 1995

3040-01-421-8826
Control Cam

014218826
3353AS256-1: RNCC: 3 | RNVC: 2
3353AS256-1: RNCC: 5 | RNVC: 2
3353AS256: RNCC: D | RNVC: 9

16 Nov 1995

3040-01-421-8768
Housing Adapter

014218768
3353AS272-1: RNCC: 3 | RNVC: 2
3353AS272-1: RNCC: 5 | RNVC: 2
3353AS272: RNCC: D | RNVC: 9

16 Nov 1995

3040-01-421-8150
Spur Gearshaft

014218150
3353AS242-1: RNCC: 3 | RNVC: 2
3353AS242-1: RNCC: 5 | RNVC: 2
3353AS242: RNCC: D | RNVC: 9

15 Nov 1995

3040-01-421-1640
Rigid Connecting Link

014211640
1339AS614-1: RNCC: 3 | RNVC: 2
1339AS614-1: RNCC: 5 | RNVC: 2
1339AS614: RNCC: D | RNVC: 9

2 Nov 1995

3040-01-421-1595
Linear Actuating Cylinder Assembly Parts Kit

014211595
272-4933: RNCC: 3 | RNVC: 2

2 Nov 1995

3040-01-421-0004
Mechanical Drive Housing

014210004
1339AS1154-1: RNCC: 3 | RNVC: 2
1339AS1154: RNCC: D | RNVC: 9

30 Oct 1995

3040-01-420-7168
Brake Band And Lining

014207168
278-0775-801: RNCC: 3 | RNVC: 2
2780775-801: RNCC: 5 | RNVC: 9
178 0373-801 IT 001: RNCC: 5 | RNVC: 9
278 0775-801: RNCC: 5 | RNVC: 9
278 0775-801: RNCC: C | RNVC: 1
278 0775-801: RNCC: C | RNVC: 1
278 0162-801: RNCC: C | RNVC: 1
2780775-801: RNCC: C | RNVC: 1
178 0373-801 IT 001: RNCC: C | RNVC: 1

24 Oct 1995

3040-01-420-1930
Pawl

014201930
3497-009-000: RNCC: 3 | RNVC: 2

11 Oct 1995

3040-01-420-0465
Remote Control Lever

014200465
25364: RNCC: 3 | RNVC: 9

5 Oct 1995

3040-01-419-7109
Shouldered Shaft

014197109
3497-014-000: RNCC: 3 | RNVC: 2

28 Sep 1995

3040-01-419-3761
Shouldered Shaft

014193761
901-331-951-107: RNCC: 3 | RNVC: 2
901-331-951-107: RNCC: 5 | RNVC: 1
TY2043-01A: RNCC: 5 | RNVC: 2

21 Sep 1995

3040-01-499-0564
Shaft Collar

014990564
518-4457094-23: RNCC: 3 | RNVC: 2
518-4457094: RNCC: D | RNVC: 9

11 Jul 2002

3040-01-419-2033
Shouldered Shaft

014192033
3-13522-1: RNCC: 3 | RNVC: 2
3-13522-1: RNCC: 5 | RNVC: 2
3-13522-1: RNCC: 5 | RNVC: 2
3-13522-1: RNCC: 5 | RNVC: 2
3-13522-1: RNCC: 5 | RNVC: 2
3-13522-1: RNCC: 5 | RNVC: 9
3-13522-1: RNCC: 5 | RNVC: 9

15 Sep 1995

3040-01-418-3142
Rigid Connecting Link

014183142
901-301-014-117: RNCC: 3 | RNVC: 2

24 Aug 1995

3040-01-418-3146
Rigid Connecting Link

014183146
901-301-014-127: RNCC: 3 | RNVC: 2

24 Aug 1995

3040-01-418-3143
Rigid Connecting Link

014183143
901-301-014-119: RNCC: 3 | RNVC: 2

24 Aug 1995

3040-01-418-3140
Rigid Connecting Link

014183140
901-301-014-113: RNCC: 3 | RNVC: 2

24 Aug 1995

3040-01-418-3134
Rigid Connecting Link

014183134
901-301-014-101: RNCC: 3 | RNVC: 2
C-01037-101: RNCC: 5 | RNVC: 9

24 Aug 1995

3040-01-418-2907
Shouldered Shaft

014182907
10516010: RNCC: 3 | RNVC: 2

24 Aug 1995

3040-01-418-0923
Flexible Drive Shaft

014180923
901-320-602-109: RNCC: 3 | RNVC: 2
901-320-602-127: RNCC: 5 | RNVC: 2

21 Aug 1995

3040-01-418-0825
Control Cam

014180825
901-320-602-111: RNCC: 3 | RNVC: 2
901-320-602-111: RNCC: 5 | RNVC: 2

21 Aug 1995

3040-01-496-7944
Manual Control Lever

014967944
526268: RNCC: 3 | RNVC: 9
PL86-75113CA7 FIG28 INDEX25: RNCC: 5 | RNVC: 2
526268: RNCC: 5 | RNVC: 9

26 Apr 2002

3040-01-495-5955
Nonaircraft Mechanical Actuator

014955955
7D3-06213: RNCC: 3 | RNVC: 2

20 Mar 2002

3040-01-416-7303
Ball Joint

014167303
85043-19: RNCC: 3 | RNVC: 2
12364837: RNCC: 3 | RNVC: 2
12364837: RNCC: 5 | RNVC: 2
RB1737: RNCC: 5 | RNVC: 2
12364837: RNCC: 5 | RNVC: 2
12364837: RNCC: 5 | RNVC: 9
83043-19: RNCC: 5 | RNVC: 9
T28-52: RNCC: 5 | RNVC: 9

25 Jul 1995

3040-01-416-6779
Linear Actuating Cylinder Piston Rod

014166779
639730: RNCC: 3 | RNVC: 2
048625-16 50: RNCC: 5 | RNVC: 9
A48625: RNCC: D | RNVC: 9

24 Jul 1995

3040-01-416-1152
Shouldered Shaft

014161152
3780244-002: RNCC: 3 | RNVC: 2
3780244-002: RNCC: 3 | RNVC: 9

13 Jul 1995

3040-01-416-1151
Shouldered Shaft

014161151
378-0227-001: RNCC: 3 | RNVC: 2
378 0227-001: RNCC: 3 | RNVC: 9
178 0373-801 IT 016: RNCC: 5 | RNVC: 2
378 0227-001: RNCC: 5 | RNVC: 2
3780227-001: RNCC: 5 | RNVC: 9
178 0373-801 IT 016: RNCC: 5 | RNVC: 9
3780227-001: RNCC: C | RNVC: 1
178 0373-801: RNCC: D | RNVC: 9
3780227: RNCC: D | RNVC: 9

13 Jul 1995

3040-01-415-6616
Straight Shaft

014156616
310F2155: RNCC: 3 | RNVC: 2

30 Jun 1995

3040-01-415-6608
Spur Gearshaft

014156608
301A26: RNCC: 3 | RNVC: 2

30 Jun 1995

3040-01-414-4112
Shouldered Shaft

014144112
R104-435-2238: RNCC: 3 | RNVC: 2

7 Jun 1995

3040-01-413-9585
Shouldered Shaft

014139585
2359626: RNCC: 3 | RNVC: 2

26 May 1995

3040-01-413-3810
Linear Actuating Cylinder

014133810
7069407: RNCC: 3 | RNVC: 2

12 May 1995

3040-01-413-3798
Mechanical Drive Housing

014133798
1988436: RNCC: 3 | RNVC: 2
1988436: RNCC: 5 | RNVC: 9
1988436: RNCC: 5 | RNVC: 9

12 May 1995

3040-01-412-9603
Linear Actuating Cylinder Piston

014129603
84278: RNCC: 3 | RNVC: 2
84281 ITEM 19: RNCC: 5 | RNVC: 2

3 May 1995

3040-01-486-3886
Shaft Collar

014863886
518-5794756 ITEM 43: RNCC: 3 | RNVC: 2
2018-5 ITEM 43: RNCC: 5 | RNVC: 2
2018-5: RNCC: D | RNVC: 9
5794756: RNCC: D | RNVC: 9

27 Jun 2001

3040-01-412-1125
Rigid Connecting Link

014121125
RCSK14648: RNCC: 3 | RNVC: 2
12448416: RNCC: 3 | RNVC: 2
RCSK14648: RNCC: 5 | RNVC: 2

11 Apr 1995

3040-01-411-7589
Rigid Connecting Link

014117589
102833: RNCC: 3 | RNVC: 2
102833: RNCC: 5 | RNVC: 9
2102833: RNCC: C | RNVC: 1
102833: RNCC: C | RNVC: 1

30 Mar 1995

3040-01-411-7591
Remote Control Lever

014117591
106954: RNCC: 3 | RNVC: 2
105352: RNCC: 5 | RNVC: 1
105352 PART NO.106954: RNCC: 5 | RNVC: 2
106954: RNCC: C | RNVC: 1

30 Mar 1995

3040-01-411-5714
Shouldered Shaft

014115714
3041053: RNCC: 3 | RNVC: 2

28 Mar 1995

3040-01-410-8091
Spline Adapter

014108091
12388112: RNCC: 3 | RNVC: 2

12 Mar 1995

3040-01-410-8068
Shouldered Shaft

014108068
8661613: RNCC: 3 | RNVC: 2
8661613: RNCC: 3 | RNVC: 2
8661613: RNCC: 5 | RNVC: 9
3040PL0739419: RNCC: 6 | RNVC: 9

12 Mar 1995

3040-01-479-7909
Body Hub

014797909
27773: RNCC: 3 | RNVC: 9

27 Oct 2000

3040-01-479-4823
Solenoid Lever

014794823
5-28-7009-00: RNCC: 3 | RNVC: 2

23 Oct 2000

3040-01-408-8135
Shouldered Shaft

014088135
10457032: RNCC: 3 | RNVC: 2
10457032: RNCC: 5 | RNVC: 9
10457032: RNCC: 5 | RNVC: 9

27 Feb 1995

3040-01-408-7187
Linear Actuating Cylinder Piston Rod

014087187
328072: RNCC: 3 | RNVC: 2
328072: RNCC: 5 | RNVC: 9

24 Feb 1995

3040-01-408-4954
Manual Control Lever

014084954
15603808: RNCC: 3 | RNVC: 2
15603808: RNCC: 5 | RNVC: 9

17 Feb 1995

3040-01-408-0143
Linear Actuating Cylinder Assembly

014080143
050590.2: RNCC: 3 | RNVC: 2
050590.2: RNCC: 5 | RNVC: 2
050590.2: RNCC: 5 | RNVC: 9

8 Feb 1995

3040-01-476-5016
Pivot Shaft Assembly

014765016
1250839: RNCC: 3 | RNVC: 9

14 Jul 2000

3040-01-407-0749
Linear Actuating Cylinder Piston Rod

014070749
210476: RNCC: 3 | RNVC: 2
210476: RNCC: 5 | RNVC: 2
210476: RNCC: 5 | RNVC: 2
13811: RNCC: D | RNVC: 9

20 Jan 1995

3040-01-407-0730
Nonrotating Shaft Eye Bracket

014070730
202416-1: RNCC: 3 | RNVC: 2
202416-1: RNCC: 5 | RNVC: 9

20 Jan 1995

3040-01-475-1261
Linear Actuating Cylinder Head

014751261
1465032: RNCC: 3 | RNVC: 9

23 May 2000

3040-01-474-9741
Shouldered Shaft

014749741
2040747: RNCC: 3 | RNVC: 9
2040747: RNCC: 5 | RNVC: 2
AT219598: RNCC: 5 | RNVC: 9

18 May 2000

3040-01-474-4955
Shaft Collar

014744955
820-7334183-1: RNCC: 3 | RNVC: 1

4 May 2000

3040-01-474-3516
Body Hub

014743516
1153837: RNCC: 3 | RNVC: 9

2 May 2000

3040-01-474-2889
Rigid Connecting Link

014742889
1709163: RNCC: 3 | RNVC: 9

1 May 2000

3040-01-473-6928
Linear Actuating Cylinder Head

014736928
4T1679: RNCC: 3 | RNVC: 9

13 Apr 2000

3040-01-473-6832
Body Hub

014736832
1508497: RNCC: 3 | RNVC: 9

13 Apr 2000

3040-01-473-6829
Planetary Gears Carrier

014736829
1508494: RNCC: 3 | RNVC: 9

13 Apr 2000

3040-01-473-6831
Planetary Gears Carrier

014736831
1508495: RNCC: 3 | RNVC: 9

13 Apr 2000

3040-01-473-6496
Linear Actuating Cylinder Piston

014736496
1465026: RNCC: 3 | RNVC: 9

12 Apr 2000

3040-01-473-6484
Linear Actuating Cylinder Piston

014736484
1465028: RNCC: 3 | RNVC: 9

12 Apr 2000

3040-01-473-6478
Linear Actuating Cylinder Piston

014736478
1465632: RNCC: 3 | RNVC: 9

12 Apr 2000

3040-01-473-6444
Linear Actuating Cylinder Assembly

014736444
1243844: RNCC: 3 | RNVC: 9
CV130913: RNCC: 5 | RNVC: 2
124-3844: RNCC: 5 | RNVC: 2

12 Apr 2000

3040-01-473-6375
Shouldered Shaft

014736375
1456896: RNCC: 3 | RNVC: 9

12 Apr 2000

3040-01-473-6306
Linear Actuating Cylinder Head

014736306
1465631: RNCC: 3 | RNVC: 9

12 Apr 2000

3040-01-473-6174
Spur Gearshaft

014736174
1249677: RNCC: 3 | RNVC: 9

12 Apr 2000

3040-01-473-6292
Linear Actuating Cylinder Head

014736292
1465027: RNCC: 3 | RNVC: 9

12 Apr 2000

3040-01-473-6293
Linear Actuating Cylinder Head

014736293
1465029: RNCC: 3 | RNVC: 9

12 Apr 2000

3040-01-473-6272
Planetary Gears Carrier

014736272
6Y4847: RNCC: 3 | RNVC: 9

12 Apr 2000

3040-01-473-6098
Shouldered Shaft

014736098
1418030: RNCC: 3 | RNVC: 9

12 Apr 2000

3040-01-473-5544
Shouldered Shaft

014735544
1419986: RNCC: 3 | RNVC: 9

11 Apr 2000

3040-01-473-5325
Mechanical Drive Housing

014735325
6Y5968: RNCC: 3 | RNVC: 9

11 Apr 2000

3040-01-473-5251
Hub Clamp

014735251
1418135: RNCC: 3 | RNVC: 9
CV205657: RNCC: 5 | RNVC: 2

11 Apr 2000

3040-01-473-5231
Mechanical Drive Housing

014735231
9U9363: RNCC: 3 | RNVC: 9

11 Apr 2000

3040-01-473-5185
Rigid Connecting Link

014735185
1162125: RNCC: 3 | RNVC: 9

11 Apr 2000

3040-01-473-5106
Straight Shaft

014735106
1509148: RNCC: 3 | RNVC: 9

11 Apr 2000

3040-01-473-5066
Shouldered Shaft

014735066
1245985: RNCC: 3 | RNVC: 9

11 Apr 2000

3040-01-473-5050
Straight Shaft

014735050
1509150: RNCC: 3 | RNVC: 9

11 Apr 2000

3040-01-473-5045
Straight Shaft

014735045
1268179: RNCC: 3 | RNVC: 9

11 Apr 2000

3040-01-473-4546
Hub Clamp

014734546
1419987: RNCC: 3 | RNVC: 9

10 Apr 2000

3040-01-473-4525
Shouldered Shaft

014734525
1260555: RNCC: 3 | RNVC: 9

10 Apr 2000

3040-01-473-4463
Bell Crank

014734463
1432211: RNCC: 3 | RNVC: 9

10 Apr 2000

3040-01-473-4400
Bell Crank

014734400
1432210: RNCC: 3 | RNVC: 9

10 Apr 2000

3040-01-473-4200
Manual Control Lever

014734200
1306901: RNCC: 3 | RNVC: 9

7 Apr 2000

3040-01-473-3587
Planetary Gears Carrier

014733587
1245988: RNCC: 3 | RNVC: 9

6 Apr 2000

3040-01-473-3070
Body Hub

014733070
6Y4424: RNCC: 3 | RNVC: 9

4 Apr 2000

3040-01-470-1611
Shouldered Shaft

014701611
G0009-0001: RNCC: 3 | RNVC: 9
G0009-0001: RNCC: 5 | RNVC: 2
05 NAVAI REV E ITEM 4: RNCC: 5 | RNVC: 9
T0019-0001: RNCC: C | RNVC: 1

9 Dec 1999

3040-01-400-6084
Remote Control Lever

014006084
7749469: RNCC: 3 | RNVC: 2
49469: RNCC: 5 | RNVC: 9

16 Dec 1994

3040-01-400-6086
Remote Control Lever

014006086
7749468: RNCC: 3 | RNVC: 2
49468: RNCC: 5 | RNVC: 9

16 Dec 1994

3040-01-463-6096
Straight Shaft

014636096
157D4358-4: RNCC: 3 | RNVC: 2

30 Mar 1999

3040-01-399-7392
Linear Actuating Cylinder Piston Rod

013997392
TG82EKECA251: RNCC: 3 | RNVC: 2
CA251 ITEM 12: RNCC: 5 | RNVC: 9
CA251: RNCC: D | RNVC: 9

4 Dec 1994

3040-01-399-5947
Straight Shaft

013995947
184080-4: RNCC: 3 | RNVC: 2
184080-4: RNCC: 5 | RNVC: 2

30 Nov 1994

3040-01-399-5652
Shouldered Shaft

013995652
65700-40300-103: RNCC: 3 | RNVC: 2
65700-40300: RNCC: D | RNVC: 9

30 Nov 1994

3040-01-462-0456
Shoulder Shaft Hp

014620456
3072545-1: RNCC: 3 | RNVC: 2

19 Jan 1999

3040-01-398-8365
Rigid Connecting Link

013988365
HP11: RNCC: 3 | RNVC: 2

9 Nov 1994

3040-01-398-5638
Linear Actuating Cylinder Assembly

013985638
25.021: RNCC: 3 | RNVC: 2
073809: RNCC: 3 | RNVC: 9
073809: RNCC: 5 | RNVC: 9

5 Nov 1994

3040-01-398-5588
Mechanically Actuated Spindle

013985588
2313497: RNCC: 3 | RNVC: 2
3271H005: RNCC: 3 | RNVC: 2
3271H004: RNCC: 5 | RNVC: 9
3271H002: RNCC: 5 | RNVC: 9

5 Nov 1994

3040-01-398-3372
Push-Pull Control Assembly

013983372
4P5745: RNCC: 3 | RNVC: 2

31 Oct 1994

3040-01-398-3370
Spur Gearshaft

013983370
2W8090: RNCC: 3 | RNVC: 2

31 Oct 1994

3040-01-398-3368
Spur Gearshaft

013983368
2W8087: RNCC: 3 | RNVC: 2

31 Oct 1994

3040-01-458-8951
Mechanical Drive Housing

014588951
115J732ITEM2: RNCC: 3 | RNVC: 1
115J732-3: RNCC: 3 | RNVC: 9
115J732-3: RNCC: C | RNVC: 1

14 Sep 1998

3040-01-397-5688
Shouldered Shaft

013975688
51673: RNCC: 3 | RNVC: 2
10-21-171-003: RNCC: 3 | RNVC: 9
10-22-000-028: RNCC: D | RNVC: 9

13 Oct 1994

3040-01-397-5307
Nonaircraft Mechanical Actuator

013975307
12438870: RNCC: 3 | RNVC: 2

13 Oct 1994

3040-01-396-8777
Shaft Retaining Plate

013968777
145C6126-1: RNCC: 3 | RNVC: 2

27 Sep 1994

3040-01-396-7791
Detent Plate

013967791
PT-03: RNCC: 3 | RNVC: 2
PT-3: RNCC: 5 | RNVC: 9

23 Sep 1994

3040-01-396-1962
Push-Pull Control Assembly

013961962
32377-003-36: RNCC: 3 | RNVC: 2
32377-003-3FT: RNCC: 3 | RNVC: 2
32377-003-36: RNCC: 5 | RNVC: 9
32377-003-3FT: RNCC: 5 | RNVC: 9

14 Sep 1994

3040-01-396-1416
Shouldered Shaft

013961416
R3561: RNCC: 3 | RNVC: 2
23360: RNCC: 5 | RNVC: 9

14 Sep 1994

3040-01-395-3025
Push-Pull Control Assembly Parts Kit

013953025
2009-0901: RNCC: 3 | RNVC: 2
606510-33: RNCC: 5 | RNVC: 2
142015/1: RNCC: 5 | RNVC: 2
D-9810-0022: RNCC: D | RNVC: 9

26 Aug 1994

3040-01-395-0410
Shaft Retaining Plate

013950410
23092: RNCC: 3 | RNVC: 2

19 Aug 1994

3040-01-453-0942
Counterbalance Weight

014530942
101A796BF-1: RNCC: 3 | RNVC: 9
101A796BF-1: RNCC: 5 | RNVC: 9
101A796BF-1: RNCC: C | RNVC: 1
101A796BF-1: RNCC: C | RNVC: 1

19 Feb 1998

3040-01-452-5192
Rotating Shaft Eye Bracket

014525192
9-564-010026: RNCC: 3 | RNVC: 2
9-564-010026: RNCC: 5 | RNVC: 2
9-564-010026: RNCC: 5 | RNVC: 2

29 Jan 1998

3040-01-452-3505
Rigid Connecting Link

014523505
214-4364090ASSY79: RNCC: 3 | RNVC: 1
608-4363048ITEMX-160: RNCC: 5 | RNVC: 1

23 Jan 1998

3040-01-393-8375
Brake Backing Plate

013938375
73164: RNCC: 3 | RNVC: 2
74814: RNCC: 5 | RNVC: 9
54487: RNCC: 5 | RNVC: 9
58232: RNCC: 5 | RNVC: 9
58232: RNCC: C | RNVC: 1

28 Jul 1994

3040-01-451-4200
Linear Actuating Cylinder Assembly

014514200
9T-9562: RNCC: 3 | RNVC: 9

16 Dec 1997

3040-01-393-5307
Shaft Retaining Plate

013935307
A4480Q: RNCC: 3 | RNVC: 2

21 Jul 1994

3040-01-393-0608
Counterbalance Weight

013930608
2779K34P008: RNCC: 3 | RNVC: 2

13 Jul 1994

3040-01-392-3973
Shouldered Shaft

013923973
3042827: RNCC: 3 | RNVC: 2

29 Jun 1994

3040-01-392-3970
Shaft Idler

013923970
3202114: RNCC: 3 | RNVC: 2
3001962: RNCC: E | RNVC: 8

29 Jun 1994

3040-01-392-2310
Shouldered Shaft

013922310
7B0385: RNCC: 3 | RNVC: 2

26 Jun 1994

3040-01-392-0361
Rigid Connecting Link

013920361
3201188: RNCC: 3 | RNVC: 2

22 Jun 1994

3040-01-391-5888
Shouldered Shaft

013915888
AO.1162 ITEM 89: RNCC: 3 | RNVC: 2
A3.1170: RNCC: 5 | RNVC: 2
AO.1162 ITEM 89: RNCC: 5 | RNVC: 9

15 Jun 1994

3040-01-391-3180
Linear Actuating Cylinder Piston

013913180
BW501401-1: RNCC: 3 | RNVC: 2
BW501401-1: RNCC: 5 | RNVC: 2

8 Jun 1994

3040-01-390-4458
Rigid Connecting Link

013904458
12356048: RNCC: 3 | RNVC: 2

19 May 1994

3040-01-389-6473
Body Hub

013896473
755006-203: RNCC: 3 | RNVC: 9
755006-202: RNCC: 5 | RNVC: 9

27 Apr 1994

3040-01-445-8875
Transmission Fluid Cooler

014458875
3350865-1: RNCC: 3 | RNVC: 2

16 Jun 1997

3040-01-388-9210
Linear Actuating Cylinder

013889210
G0004775: RNCC: 3 | RNVC: 2
4246671: RNCC: 5 | RNVC: 9

13 Apr 1994

3040-01-388-5812
Shouldered Shaft

013885812
87024A6206: RNCC: 3 | RNVC: 2
87024A6206: RNCC: 5 | RNVC: 2

4 Apr 1994

3040-01-388-4831
Rigid Connecting Link

013884831
8589-001: RNCC: 3 | RNVC: 2
8589-001: RNCC: 3 | RNVC: 9

31 Mar 1994

3040-01-388-3776
Control Cam

013883776
20963: RNCC: 3 | RNVC: 2

29 Mar 1994

3040-01-443-6267
Plate Assembly

014436267
4443194: RNCC: 3 | RNVC: 2

14 Apr 1997

3040-01-388-1259
Accumulator Cap

013881259
435345: RNCC: 3 | RNVC: 9
435345: RNCC: 5 | RNVC: 2
435345: RNCC: 5 | RNVC: 9
435345: RNCC: 5 | RNVC: 9

21 Mar 1994

3040-01-388-0652
Flexible Shaft Assembly

013880652
446900-1X-140: RNCC: 3 | RNVC: 2
446900-1X-140: RNCC: 5 | RNVC: 9

18 Mar 1994

3040-01-442-3155
Brake Spindel

014423155
548047-80: RNCC: 3 | RNVC: 2

11 Mar 1997

3040-01-442-2897
Shouldered Shaft Assembly

014422897
DM12512-3: RNCC: 3 | RNVC: 2
DM12512: RNCC: D | RNVC: 9

11 Mar 1997

3040-01-387-4040
Rigid Connecting Link

013874040
500161: RNCC: 3 | RNVC: 2
500161: RNCC: 3 | RNVC: 9

4 Mar 1994

3040-01-441-6633
Shouldered Shaft

014416633
052867-00: RNCC: 3 | RNVC: 9
878118 REF NO. 2: RNCC: 5 | RNVC: 9
052867-00: RNCC: C | RNVC: 1
878118 REF NO. 2: RNCC: C | RNVC: 1

20 Feb 1997

3040-01-386-6637
Grease Cap

013866637
21-39: RNCC: 3 | RNVC: 9

10 Feb 1994

3040-01-386-5685
Rigid Connecting Link

013865685
SW34212: RNCC: 3 | RNVC: 2
3040013865685: RNCC: 6 | RNVC: 9

8 Feb 1994

3040-01-386-4570
Linear Actuating Cylinder Assembly

013864570
87024A0007: RNCC: 3 | RNVC: 2
A1-501531: RNCC: 5 | RNVC: 2
BW501531-1: RNCC: 5 | RNVC: 2

4 Feb 1994

3040-01-386-3385
Linear Actuating Cylinder Assembly Parts Kit

013863385
SK-63: RNCC: 3 | RNVC: 2
SK-63: RNCC: 5 | RNVC: 9

3 Feb 1994

3040-01-386-3277
Control Cam

013863277
S23-12107: RNCC: 3 | RNVC: 2

3 Feb 1994

3040-01-385-8907
Piston Ring

013858907
S30640-116: RNCC: 3 | RNVC: 2

21 Jan 1994

3040-01-385-6861
Control Cam

013856861
357556-6: RNCC: 3 | RNVC: 2
357556-6: RNCC: 5 | RNVC: 9
357556: RNCC: D | RNVC: 9

16 Jan 1994

3040-01-385-1277
Transmission Fluid Cooler

013851277
80VX1573: RNCC: 3 | RNVC: 2
80VX1573: RNCC: 5 | RNVC: 9
GR2079A: RNCC: D | RNVC: 9

4 Jan 1994

3040-01-385-1255
Rigid Connecting Link

013851255
2497626: RNCC: 3 | RNVC: 2
5479037: RNCC: 5 | RNVC: 9
5479037: RNCC: 5 | RNVC: 9

4 Jan 1994

3040-01-384-8912
Spline Adapter

013848912
0618620B: RNCC: 3 | RNVC: 2
GR2079A-: RNCC: D | RNVC: 9

23 Dec 1993

3040-01-384-8849
Linear Actuating Cylinder Assembly

013848849
21217-5000: RNCC: 3 | RNVC: 2
TP00884: RNCC: 5 | RNVC: 2
T00884: RNCC: D | RNVC: 9

23 Dec 1993

3040-01-384-7083
Shaft.Barring Divic

013847083
206089: RNCC: 3 | RNVC: 2

22 Dec 1993

3040-01-384-6485
Shouldered Shaft

013846485
7004186: RNCC: 3 | RNVC: 2

20 Dec 1993

3040-01-384-6278
Straight Shaft

013846278
9306-21: RNCC: 3 | RNVC: 2

19 Dec 1993

3040-01-437-5973
Mechanical Drive Housing

014375973
1321258: RNCC: 3 | RNVC: 2
D1320144: RNCC: 5 | RNVC: 2
1321258: RNCC: 5 | RNVC: 9
D1320144: RNCC: 5 | RNVC: 9

18 Oct 1996

3040-01-384-1110
Shouldered Shaft

013841110
905101: RNCC: 3 | RNVC: 9
8624-001: RNCC: 5 | RNVC: 9
905101: RNCC: C | RNVC: 1
8624-001: RNCC: C | RNVC: 1

8 Dec 1993

3040-01-384-1029
Mechanical Drive Housing

013841029
7004193: RNCC: 3 | RNVC: 2

8 Dec 1993

3040-01-384-0911
Control Cam

013840911
7004192: RNCC: 3 | RNVC: 2

8 Dec 1993

3040-01-384-0720
Shouldered Shaft

013840720
7004185: RNCC: 3 | RNVC: 2

8 Dec 1993

3040-01-383-5653
Push-Pull Control Assembly Parts Kit

013835653
39489-002: RNCC: 3 | RNVC: 9
39489-002: RNCC: 5 | RNVC: 2
39489-2: RNCC: 5 | RNVC: 2
6730829 ITEM 85: RNCC: 5 | RNVC: 2
39489-2: RNCC: 5 | RNVC: 9
6730829: RNCC: D | RNVC: 9

25 Nov 1993

3040-01-382-6556
Shouldered Shaft

013826556
391 1401 502: RNCC: 3 | RNVC: 2

5 Nov 1993

3040-01-434-7834
Counterbalance Weight

014347834
2173J73004: RNCC: 3 | RNVC: 9
2173J73004: RNCC: 5 | RNVC: 9
989E200 PT NO. 56: RNCC: 5 | RNVC: 9
2173J73-4: RNCC: 5 | RNVC: 9
2173J73004: RNCC: 5 | RNVC: 9
2173J73-4: RNCC: C | RNVC: 1
2173J73-4: RNCC: C | RNVC: 1
2173J73: RNCC: D | RNVC: 9

7 Aug 1996

3040-01-434-7399
Counterbalance Weight

014347399
2173J73003: RNCC: 3 | RNVC: 9
989E200 PT NO.55: RNCC: 5 | RNVC: 9
2173J73003: RNCC: 5 | RNVC: 9
2173J73: RNCC: 5 | RNVC: 9
2173J73003: RNCC: C | RNVC: 1
2173J73003: RNCC: C | RNVC: 1

6 Aug 1996

3040-01-381-9124
Piston Ring

013819124
236986: RNCC: 3 | RNVC: 2

23 Oct 1993

3040-01-381-8804
Inertia Damper

013818804
CDA-OB: RNCC: 3 | RNVC: 9

23 Oct 1993

3040-01-433-8787
Control Cam

014338787
16-1058-214-1: RNCC: 3 | RNVC: 2

12 Jul 1996

3040-01-381-4474
Shouldered Shaft

013814474
3819632: RNCC: 3 | RNVC: 2

15 Oct 1993

3040-01-381-2857
Shouldered Shaft

013812857
025253-1: RNCC: 3 | RNVC: 2
025253-1: RNCC: 3 | RNVC: 9

13 Oct 1993

3040-01-380-5629
Rigid Connecting Link

013805629
L3400104-011: RNCC: 3 | RNVC: 2
L3400104-011: RNCC: 5 | RNVC: 9

21 Sep 1993

3040-01-431-4261
Shouldered Shaft

014314261
7642E90: RNCC: 3 | RNVC: 9
989E200 PT NO. 29: RNCC: 5 | RNVC: 9
7642E90: RNCC: 5 | RNVC: 9
7642E90: RNCC: C | RNVC: 1
7642E90: RNCC: C | RNVC: 1

13 May 1996

3040-01-431-2522
Shaft Collar

014312522
593-6405216 FIND 36: RNCC: 3 | RNVC: 2
211035686: RNCC: 5 | RNVC: 2
593-6405216: RNCC: D | RNVC: 9

9 May 1996

3040-01-379-4601
Linear Actuating Cylinder Assembly

013794601
8D6900: RNCC: 3 | RNVC: 2

31 Aug 1993

3040-01-379-3727
Straight Shaft

013793727
12382120: RNCC: 3 | RNVC: 2

30 Aug 1993

3040-01-378-8438
Linear Actuating Cylinder Piston

013788438
9025-06: RNCC: 3 | RNVC: 2
9025-06: RNCC: 5 | RNVC: 2
9025-HR: RNCC: D | RNVC: 9

23 Aug 1993

3040-01-378-8044
Shouldered Shaft

013788044
8909-397-001: RNCC: 3 | RNVC: 2

21 Aug 1993

3040-01-378-6184
Linear Actuating Cylinder Cap

013786184
CP901: RNCC: 3 | RNVC: 2

21 Aug 1993

3040-01-378-5345
Rigid Connecting Link

013785345
G-3134: RNCC: 3 | RNVC: 2

21 Aug 1993

3040-01-378-5083
Linear Actuating Cylinder Piston

013785083
TA53ETC230: RNCC: 3 | RNVC: 2
8909A277 ITEM 7: RNCC: 5 | RNVC: 9
8909A277: RNCC: D | RNVC: 9

21 Aug 1993

3040-01-378-4675
Control Cam

013784675
795854-1: RNCC: 3 | RNVC: 2
759027-1: RNCC: E | RNVC: 8

17 Aug 1993

3040-01-428-9704
Nonaircraft Mechanical Actuator

014289704
22002-6: RNCC: 3 | RNVC: 2
22002-6: RNCC: 5 | RNVC: 2

4 Apr 1996

3040-01-378-1779
Counterbalance Weight

013781779
7005254: RNCC: 3 | RNVC: 2
7005254: RNCC: 5 | RNVC: 2
7005254: RNCC: 5 | RNVC: 2
7005254: RNCC: 5 | RNVC: 9

12 Aug 1993

3040-01-377-8134
Rigid Connecting Link

013778134
2431-290-2: RNCC: 3 | RNVC: 2
2431-290-2: RNCC: 5 | RNVC: 9

29 Jul 1993

3040-01-377-6952
Inertia Damper

013776952
J323 6097: RNCC: 3 | RNVC: 9

23 Jul 1993

3040-01-377-6621
Shouldered Shaft

013776621
682935: RNCC: 3 | RNVC: 2
5JA368: RNCC: C | RNVC: 1

23 Jul 1993

3040-01-377-5354
Linear Actuating Cylinder Assembly

013775354
87024A4342: RNCC: 3 | RNVC: 2
87024A4342: RNCC: 5 | RNVC: 2

20 Jul 1993

3040-01-377-4210
Shouldered Shaft

013774210
13294157-1: RNCC: 3 | RNVC: 2

15 Jul 1993

3040-01-377-4031
Body Hub

013774031
M900738: RNCC: 3 | RNVC: 2
900738: RNCC: 5 | RNVC: 2

15 Jul 1993

3040-01-377-4030
Shaft Collar

013774030
M900739: RNCC: 3 | RNVC: 2
900739: RNCC: 5 | RNVC: 2

15 Jul 1993

3040-01-377-2066
Linear Actuating Cylinder Assembly

013772066
87024A4290: RNCC: 3 | RNVC: 2
87024A4290: RNCC: 5 | RNVC: 2

7 Jul 1993

3040-01-376-5014
Counterbalance Weight

013765014
3823214-8: RNCC: 3 | RNVC: 2
3823214-8: RNCC: 5 | RNVC: 2
3823214-8: RNCC: 5 | RNVC: 2
3823214-8: RNCC: 5 | RNVC: 9

4 Jun 1993

3040-01-376-5013
Counterbalance Weight

013765013
7005253-1: RNCC: 3 | RNVC: 2
7005253-1: RNCC: 5 | RNVC: 2
7005253-1: RNCC: 5 | RNVC: 2
7005253-1: RNCC: 5 | RNVC: 9

4 Jun 1993

3040-01-376-3374
Rigid Connecting Link

013763374
15612999: RNCC: 3 | RNVC: 2
15612999: RNCC: 5 | RNVC: 9

29 May 1993

3040-01-376-3373
Rigid Connecting Link

013763373
15991701: RNCC: 3 | RNVC: 2
15523573: RNCC: 5 | RNVC: 9
15591701: RNCC: 5 | RNVC: 9
15991701: RNCC: 5 | RNVC: 9

29 May 1993

3040-01-376-3171
Counterbalance Weight

013763171
3823214-6: RNCC: 3 | RNVC: 2
3823214-6: RNCC: 5 | RNVC: 2
3823214-6: RNCC: 5 | RNVC: 2
3823214-6: RNCC: 5 | RNVC: 9

29 May 1993

3040-01-376-3170
Counterbalance Weight

013763170
3823214-5: RNCC: 3 | RNVC: 2
3823214-5: RNCC: 5 | RNVC: 2
3823214-5: RNCC: 5 | RNVC: 2
3823214-5: RNCC: 5 | RNVC: 9

29 May 1993

3040-01-376-2740
Rigid Connecting Link

013762740
366-07191: RNCC: 3 | RNVC: 2

28 May 1993

3040-01-376-2129
Counterbalance Weight

013762129
7005253-2: RNCC: 3 | RNVC: 2
7005253-2: RNCC: 5 | RNVC: 2
7005253-2: RNCC: 5 | RNVC: 2
7005253-2: RNCC: 5 | RNVC: 9

28 May 1993

3040-01-376-2130
Counterbalance Weight

013762130
3823214-9: RNCC: 3 | RNVC: 2
3823214-9: RNCC: 5 | RNVC: 2
3823214-9: RNCC: 5 | RNVC: 2
3823214-9: RNCC: 5 | RNVC: 9

28 May 1993

3040-01-376-2128
Counterbalance Weight

013762128
3823166: RNCC: 3 | RNVC: 2
3823166: RNCC: 5 | RNVC: 2
3823166: RNCC: 5 | RNVC: 2
3823166: RNCC: 5 | RNVC: 9

28 May 1993

3040-01-376-1606
Counterbalance Weight

013761606
3823214-10: RNCC: 3 | RNVC: 2
3823214-10: RNCC: 5 | RNVC: 2
3823214-10: RNCC: 5 | RNVC: 2
3823214-10: RNCC: 5 | RNVC: 9

27 May 1993

3040-01-376-1605
Counterbalance Weight

013761605
3823214-7: RNCC: 3 | RNVC: 2
3823214-7: RNCC: 5 | RNVC: 2
3823214-7: RNCC: 5 | RNVC: 2
3823214-7: RNCC: 5 | RNVC: 9

27 May 1993

3040-01-376-1390
Breather

013761390
42315-183: RNCC: 3 | RNVC: 2
42315-183: RNCC: 5 | RNVC: 9
42315-183: RNCC: 5 | RNVC: 9

27 May 1993

3040-01-376-1191
Spur Gearshaft

013761191
42315-46: RNCC: 3 | RNVC: 2
42315-46: RNCC: 3 | RNVC: 9
42315-46: RNCC: 5 | RNVC: 9

27 May 1993

3040-01-376-0683
Multiple Gears Gearshaft

013760683
42315-43: RNCC: 3 | RNVC: 2
42315-43: RNCC: 5 | RNVC: 9

27 May 1993

3040-01-376-0415
Shaft-Actuator Output

013760415
7005487: RNCC: 3 | RNVC: 2
7005487-1: RNCC: 3 | RNVC: 2
G544618: RNCC: 5 | RNVC: 2
G544618: RNCC: 5 | RNVC: 2
7005487-1: RNCC: 5 | RNVC: 2
7005487-1: RNCC: 5 | RNVC: 2
7005487: RNCC: 5 | RNVC: 2
7005487: RNCC: 5 | RNVC: 2
7005487: RNCC: 5 | RNVC: 9
7005487-1: RNCC: 5 | RNVC: 9

26 May 1993

3040-01-375-9975
Counterbalance Weight

013759975
7005252: RNCC: 3 | RNVC: 2
7005252: RNCC: 5 | RNVC: 2
7005252: RNCC: 5 | RNVC: 2
7005252: RNCC: 5 | RNVC: 9

24 May 1993

3040-01-375-8737
Counterbalance Weight

013758737
3823214-3: RNCC: 3 | RNVC: 2
3823214-3: RNCC: 5 | RNVC: 2
3823214-3: RNCC: 5 | RNVC: 2
3823214-3: RNCC: 5 | RNVC: 9

23 May 1993

3040-01-375-8735
Counterbalance Weight

013758735
3823214-1: RNCC: 3 | RNVC: 2
3823214-1: RNCC: 5 | RNVC: 2
3823214-1: RNCC: 5 | RNVC: 2
3823214-1: RNCC: 5 | RNVC: 9

23 May 1993

3040-01-375-8736
Counterbalance Weight

013758736
3823214-2: RNCC: 3 | RNVC: 2
3823214-2: RNCC: 5 | RNVC: 2
3823214-2: RNCC: 5 | RNVC: 2
3823214-2: RNCC: 5 | RNVC: 9

23 May 1993

3040-01-375-8738
Counterbalance Weight

013758738
3823214-4: RNCC: 3 | RNVC: 2
3823214-4: RNCC: 5 | RNVC: 2
3823214-4: RNCC: 5 | RNVC: 2
3823214-4: RNCC: 5 | RNVC: 9

23 May 1993

3040-01-375-8375
Counterbalance Weight

013758375
7005251: RNCC: 3 | RNVC: 2
7005251: RNCC: 5 | RNVC: 2
7005251: RNCC: 5 | RNVC: 2
7005251: RNCC: 5 | RNVC: 9

21 May 1993

3040-01-425-3234
Control Cam

014253234
211F666-1: RNCC: 3 | RNVC: 2

16 Feb 1996

3040-01-375-7484
Linear Actuating Cylinder Assembly

013757484
87024A0008: RNCC: 3 | RNVC: 2
87024A0008: RNCC: 5 | RNVC: 2
87024A0008: RNCC: 5 | RNVC: 2
RCA-60002-07450: RNCC: 5 | RNVC: 2
87024A0008: RNCC: 5 | RNVC: 9
RCA-60002-07450: RNCC: 5 | RNVC: 9

20 May 1993

3040-01-425-1065
Shouldered Shaft Assembly

014251065
29503947: RNCC: 3 | RNVC: 2
29503947: RNCC: 3 | RNVC: 9

12 Feb 1996

3040-01-375-4611
Shaft Retaining Plate

013754611
87024A4205: RNCC: 3 | RNVC: 2
87024A4205: RNCC: 5 | RNVC: 2

11 May 1993

3040-01-375-3821
Body Hub

013753821
FSB-15-87-6: RNCC: 3 | RNVC: 2
FSB-15-87-X: RNCC: D | RNVC: 9

8 May 1993

3040-01-375-1457
Shouldered Shaft

013751457
5583: RNCC: 3 | RNVC: 2

6 May 1993

3040-01-423-7286
Counterbalance Weight

014237286
389626-1: RNCC: 3 | RNVC: 2

8 Jan 1996

3040-01-374-8541
Shouldered Shaft

013748541
2478W298: RNCC: 3 | RNVC: 2
2478W298: RNCC: 5 | RNVC: 2

30 Apr 1993

3040-01-422-8994
Straight Shaft

014228994
7115362: RNCC: 3 | RNVC: 2
7115362: RNCC: 5 | RNVC: 9

11 Dec 1995

3040-01-374-3116
Pawl

013743116
29-26090-00: RNCC: 3 | RNVC: 2
G0004065: RNCC: 5 | RNVC: 2
G0004065: RNCC: 5 | RNVC: 9

21 Apr 1993

3040-01-422-0461
Shouldered Shaft

014220461
520.126: RNCC: 3 | RNVC: 9
520.126: RNCC: 5 | RNVC: 2
TM D365645-3EPG 500.02/10: RNCC: 5 | RNVC: 2
TM D365645-3EPG 500.02/23: RNCC: 5 | RNVC: 2

21 Nov 1995

3040-01-374-2598
Rigid Connecting Link

013742598
4079041: RNCC: 3 | RNVC: 2
4079041: RNCC: 5 | RNVC: 2
3040PL0669182: RNCC: 6 | RNVC: 9

19 Apr 1993

3040-01-374-0363
Flexible Drive Shaft

013740363
87024A4275: RNCC: 3 | RNVC: 2
87024A4275: RNCC: 5 | RNVC: 2

14 Apr 1993

3040-01-374-0126
Bevel Gearshaft

013740126
7709107: RNCC: 3 | RNVC: 2

14 Apr 1993

3040-01-373-9983
Straight Shaft

013739983
8350957: RNCC: 3 | RNVC: 2

14 Apr 1993

3040-01-373-8438
Shouldered Shaft

013738438
48704: RNCC: 3 | RNVC: 2
48704: RNCC: 3 | RNVC: 9
27770: RNCC: 5 | RNVC: 9

11 Apr 1993

3040-01-373-1235
Shouldered Shaft

013731235
728-0122-063: RNCC: 3 | RNVC: 9

27 Mar 1993

3040-01-373-0618
Rigid Connecting Link

013730618
382700-1: RNCC: 3 | RNVC: 2
382700-1: RNCC: 5 | RNVC: 2
382700: RNCC: D | RNVC: 9

26 Mar 1993

3040-01-373-0555
Linear Actuating Cylinder

013730555
88012-2PC3: RNCC: 3 | RNVC: 2
8751005: RNCC: 5 | RNVC: 2

26 Mar 1993

3040-01-420-1967
Mechanical Drive Housing

014201967
101C426AB-10: RNCC: 3 | RNVC: 9
101C426AB-10: RNCC: 5 | RNVC: 9
125D225AB-22: RNCC: 5 | RNVC: 9
101C426AB-10: RNCC: C | RNVC: 1
101C426AB-10: RNCC: C | RNVC: 1

11 Oct 1995

3040-01-372-8466
Linear Actuating Cylinder Piston

013728466
8801-2PC23: RNCC: 3 | RNVC: 2
8649529: RNCC: 5 | RNVC: 2

20 Mar 1993

3040-01-372-8259
Body Hub

013728259
9340527: RNCC: 3 | RNVC: 2

19 Mar 1993

3040-01-372-4426
Turnbuckle Assembly

013724426
6138979-33: RNCC: 3 | RNVC: 2
6138798-33: RNCC: 5 | RNVC: 9
6138979-33: RNCC: 5 | RNVC: 9
6138979-33: RNCC: 5 | RNVC: 9
6138979: RNCC: D | RNVC: 9

10 Mar 1993

3040-01-372-3487
Bell Crank

013723487
8909-268-001: RNCC: 3 | RNVC: 2
8909-268-001: RNCC: 5 | RNVC: 9

7 Mar 1993

3040-01-372-1533
Pneumatic Actuator Cylinder Housing

013721533
894150: RNCC: 3 | RNVC: 2
894050: RNCC: 5 | RNVC: 9

3 Mar 1993

3040-01-371-6807
Linear Actuating Cylinder Assembly

013716807
6372001504: RNCC: 3 | RNVC: 2
6-372-001023: RNCC: 5 | RNVC: 9

20 Feb 1993

3040-01-418-4169
Counterbalance Weight

014184169
911412-1: RNCC: 3 | RNVC: 2

25 Aug 1995

3040-01-418-4168
Counterbalance Weight

014184168
911416-1: RNCC: 3 | RNVC: 2

25 Aug 1995

3040-01-418-4164
Counterbalance Weight

014184164
911414-1: RNCC: 3 | RNVC: 2

25 Aug 1995

3040-01-371-4418
Straight Shaft

013714418
853850-6: RNCC: 3 | RNVC: 2

13 Feb 1993

3040-01-418-0812
Planetary-Blade Fol

014180812
901-311-601-106: RNCC: 1 | RNVC: 3
2741478-6-1: RNCC: 3 | RNVC: 3

21 Aug 1995

3040-01-418-0815
Planetary-Blade Fold

014180815
901-311-601-108: RNCC: 1 | RNVC: 3
2741478-12-1: RNCC: 3 | RNVC: 3
2741478-12-1: RNCC: 5 | RNVC: 3
2741478-8-1: RNCC: 5 | RNVC: 9

21 Aug 1995

3040-01-371-2691
Linear Actuating Cylinder Assembly

013712691
EP-0024042: RNCC: 3 | RNVC: 2
9119003: RNCC: 5 | RNVC: 9
97038: RNCC: 5 | RNVC: 9
9119001: RNCC: 5 | RNVC: 9
9119003: RNCC: 5 | RNVC: 9
9119001: RNCC: 5 | RNVC: 9

9 Feb 1993

3040-01-371-2669
Breather

013712669
M96854: RNCC: 3 | RNVC: 2

9 Feb 1993

3040-01-371-2653
Shouldered Shaft

013712653
2350717: RNCC: 3 | RNVC: 2
1309877: RNCC: 5 | RNVC: 2
1309877: RNCC: 5 | RNVC: 9
2350716: RNCC: D | RNVC: 9

9 Feb 1993

3040-01-370-8191
Hydraulic Accumulator

013708191
BA005B3U01X301: RNCC: 3 | RNVC: 2
BA005B3U04A1: RNCC: 5 | RNVC: 9
800973: RNCC: 5 | RNVC: 9
BA005B3U01S301: RNCC: 5 | RNVC: 9
805112: RNCC: 5 | RNVC: 9
36Q481: RNCC: 5 | RNVC: 9

30 Jan 1993

3040-01-417-0789
Shouldered Shaft Assembly

014170789
541-1101-53: RNCC: 3 | RNVC: 2

28 Jul 1995

3040-01-370-4923
Linear Actuating Cylinder Head

013704923
6-372-003505: RNCC: 3 | RNVC: 2
6-372-003505: RNCC: 5 | RNVC: 2
6-372-003505: RNCC: 5 | RNVC: 2

23 Jan 1993

3040-01-416-7153
Straight Shaft

014167153
1490061-0001: RNCC: 3 | RNVC: 2

24 Jul 1995

3040-01-370-2890
Linear Actuating Cylinder Piston Rod

013702890
6-768-002504: RNCC: 3 | RNVC: 2
6-768-002504: RNCC: 5 | RNVC: 2
6-768-002504: RNCC: 5 | RNVC: 2

17 Jan 1993

3040-01-370-2884
Linear Actuating Cylinder Piston

013702884
6-701-000934: RNCC: 3 | RNVC: 2
6-701-000934: RNCC: 5 | RNVC: 2
6-701-000934: RNCC: 5 | RNVC: 2
6-701-000934: RNCC: 5 | RNVC: 9

17 Jan 1993

3040-01-416-4524
Linear Actuating Cylinder Assembly

014164524
2791226: RNCC: 3 | RNVC: 2

19 Jul 1995

3040-01-370-1399
Linear Actuating Cylinder Head

013701399
6-372-003497: RNCC: 3 | RNVC: 2
6-372-003497: RNCC: 5 | RNVC: 2
6-372-003497: RNCC: 5 | RNVC: 2

14 Jan 1993

3040-01-370-0227
Linear Actuating Cylinder

013700227
6-372-004347: RNCC: 3 | RNVC: 2
6-372-004347: RNCC: 5 | RNVC: 2
6-372-004347: RNCC: 5 | RNVC: 2

11 Jan 1993

3040-01-369-1518
Linear Actuating Cylinder Assembly

013691518
415902: RNCC: 3 | RNVC: 2

15 Dec 1992

3040-01-368-7705
Remote Control Lever

013687705
65363-06043-101: RNCC: 3 | RNVC: 2
65363-06043: RNCC: D | RNVC: 9

8 Dec 1992

3040-01-368-7647
Manual Control Lever

013687647
65362-05009-101: RNCC: 3 | RNVC: 2
65362-05009: RNCC: D | RNVC: 9

8 Dec 1992

3040-01-368-7608
Shouldered Shaft

013687608
039-54051: RNCC: 3 | RNVC: 2
039-54051: RNCC: 5 | RNVC: 2

8 Dec 1992

3040-01-368-7597
Straight Shaft

013687597
8251623: RNCC: 3 | RNVC: 9

8 Dec 1992

3040-01-368-7596
Straight Shaft

013687596
9330010: RNCC: 3 | RNVC: 9

8 Dec 1992

3040-01-368-0140
Body Hub

013680140
G160036-2: RNCC: 3 | RNVC: 2

23 Nov 1992

3040-01-368-0090
Linear Actuating Cylinder Assembly

013680090
8909A350-001: RNCC: 3 | RNVC: 2
6961-TA: RNCC: 3 | RNVC: 2
2263-05: RNCC: 5 | RNVC: 9
8909A350-001: RNCC: 5 | RNVC: 9
6961-TA: RNCC: 5 | RNVC: 9

23 Nov 1992

3040-01-367-6182
Control Cam

013676182
12357481: RNCC: 3 | RNVC: 2
12357481: RNCC: 5 | RNVC: 9

16 Nov 1992

3040-01-367-2023
Shouldered Shaft

013672023
51130-1: RNCC: 3 | RNVC: 2
PVWH-34-LSAY-CF-1A: RNCC: 5 | RNVC: 2

9 Nov 1992

3040-01-367-0205
Spur Gearshaft

013670205
G160042-1: RNCC: 3 | RNVC: 2

5 Nov 1992

3040-01-411-8388
Pneumatic Actuator Cylinder Housing

014118388
6196076: RNCC: 3 | RNVC: 2
6196076: RNCC: 5 | RNVC: 2
6196076: RNCC: 5 | RNVC: 2

3 Apr 1995

3040-01-366-7306
Body Hub

013667306
G160036-1: RNCC: 3 | RNVC: 2
G160036-1: RNCC: 5 | RNVC: 2
G160036-1: RNCC: 5 | RNVC: 9
G160036-1: RNCC: C | RNVC: 1

1 Nov 1992

3040-01-366-7244
Shaft Idler

013667244
G160059-1: RNCC: 3 | RNVC: 2
G160059-1: RNCC: 5 | RNVC: 2
G160059-1: RNCC: 5 | RNVC: 9
G160059-1: RNCC: C | RNVC: 1
G160003: RNCC: D | RNVC: 9

1 Nov 1992

3040-01-366-7243
Shaft Idler

013667243
G160057-1: RNCC: 3 | RNVC: 2
G160057-1: RNCC: 5 | RNVC: 2
G160057-1: RNCC: 5 | RNVC: 9
G160057-1: RNCC: C | RNVC: 1
G160003: RNCC: D | RNVC: 9

1 Nov 1992

3040-01-366-5640
Counterbalance Weight

013665640
6166844: RNCC: 3 | RNVC: 2

28 Oct 1992

3040-01-366-1509
Hydraulic Accumulator

013661509
AB04B3U1A1: RNCC: 3 | RNVC: 2
AB04B3U1A1: RNCC: 3 | RNVC: 9
AB04B3U1A1: RNCC: 5 | RNVC: 9

22 Oct 1992

3040-01-366-0781
Pawl

013660781
9922.0005: RNCC: 3 | RNVC: 2

21 Oct 1992

3040-01-366-0569
Linear Actuating Cylinder Assembly

013660569
87024A0010: RNCC: 3 | RNVC: 2
A1 501473: RNCC: 5 | RNVC: 2

20 Oct 1992

3040-01-366-0568
Linear Actuating Cylinder Assembly

013660568
87024A0009: RNCC: 3 | RNVC: 2
87024A0009: RNCC: 5 | RNVC: 2
BW 205837: RNCC: 5 | RNVC: 2
130514 B: RNCC: 5 | RNVC: 9
130514B: RNCC: 5 | RNVC: 9

20 Oct 1992

3040-01-365-7148
Remote Control Lever

013657148
5125877: RNCC: 3 | RNVC: 2

11 Oct 1992

3040-01-365-5302
Linear Actuating Cylinder Assembly

013655302
87024A4008: RNCC: 3 | RNVC: 2
A1501480: RNCC: 5 | RNVC: 2

8 Oct 1992

3040-01-365-2970
Control Cable Assembly

013652970
87024A9510: RNCC: 3 | RNVC: 2
BW 207416: RNCC: 5 | RNVC: 2

5 Oct 1992

3040-01-365-2940
Linear Actuating Cylinder Assembly Parts Kit

013652940
1266643H1: RNCC: 3 | RNVC: 2
1266643H1: RNCC: 3 | RNVC: 9
1266643H1: RNCC: 5 | RNVC: 2
1266643H1: RNCC: 5 | RNVC: 9
1266643H1: RNCC: 5 | RNVC: 9

5 Oct 1992

3040-01-365-2939
Linear Actuating Cylinder Assembly Parts Kit

013652939
679329C92: RNCC: 3 | RNVC: 2
679329C92: RNCC: 5 | RNVC: 2
679329C92: RNCC: 5 | RNVC: 9
679329C92: RNCC: 5 | RNVC: 9

5 Oct 1992

3040-01-365-0236
Shaft Collar

013650236
328363: RNCC: 3 | RNVC: 2
328363: RNCC: 3 | RNVC: 9
0328363: RNCC: 5 | RNVC: 9
0328363: RNCC: 5 | RNVC: 9
0328363: RNCC: 5 | RNVC: 9
328363: RNCC: 5 | RNVC: 9
328363: RNCC: 5 | RNVC: 9
0328363: RNCC: 5 | RNVC: 9

30 Sep 1992

3040-01-364-8884
Push-Pull Control Assembly

013648884
243-3480-BC: RNCC: 3 | RNVC: 2
6138977-26: RNCC: 5 | RNVC: 2
243-348-BC: RNCC: 5 | RNVC: 9
43CD363: RNCC: C | RNVC: 1
6138977: RNCC: D | RNVC: 9

27 Sep 1992

3040-01-364-5401
Linear Actuating Cylinder Assembly

013645401
CYSR4400HY72T2B-250-8700-138-990: RNCC: 3 | RNVC: 2
CYSR4400HY72T2B-250-8700-138-990: RNCC: 3 | RNVC: 9
89156910: RNCC: 5 | RNVC: 2
89156910: RNCC: 5 | RNVC: 9

22 Sep 1992

3040-01-364-5397
Hydraulic Accumulator Cylinder

013645397
875 1064: RNCC: 3 | RNVC: 2

22 Sep 1992

3040-01-364-5396
Hydraulic Accumulator Cylinder

013645396
875 1153: RNCC: 3 | RNVC: 2

22 Sep 1992

3040-01-408-3196
Shaft Collar

014083196
DAA3520D010-001: RNCC: 3 | RNVC: 2
DAA3520D010: RNCC: D | RNVC: 9

14 Feb 1995

3040-01-364-1693
Shouldered Shaft

013641693
5761722: RNCC: 3 | RNVC: 2

12 Sep 1992

3040-01-363-8082
Counterbalance Weight

013638082
28974: RNCC: 3 | RNVC: 2
28974: RNCC: 5 | RNVC: 9

6 Sep 1992

3040-01-363-5137
Rigid Connecting Link

013635137
306070: RNCC: 3 | RNVC: 2
306070: RNCC: 5 | RNVC: 9

31 Aug 1992

3040-01-363-3925
Hydraulic Accumulator Cylinder

013633925
874 9736: RNCC: 3 | RNVC: 2
874-9736: RNCC: 5 | RNVC: 2
874-9736: RNCC: 5 | RNVC: 2
874-9736: RNCC: 5 | RNVC: 9

29 Aug 1992

3040-01-363-3095
Linear Actuating Cylinder Assembly

013633095
9025-HR: RNCC: 3 | RNVC: 2
8909A352-001: RNCC: 5 | RNVC: 2
8909A352-001: RNCC: 5 | RNVC: 9

27 Aug 1992

3040-01-363-3083
Inertia Damper

013633083
94004-991: RNCC: 3 | RNVC: 2
94004-991: RNCC: 3 | RNVC: 9
4538741-258: RNCC: 5 | RNVC: 2
94004-991: RNCC: 5 | RNVC: 9
4538741-258: RNCC: 5 | RNVC: 9
4538741-258: RNCC: 5 | RNVC: 9

27 Aug 1992

3040-01-363-2386
Mechanical Drive Housing

013632386
C23201Q7895: RNCC: 3 | RNVC: 2
C23201Q7895: RNCC: 5 | RNVC: 2
C23201Q7895: RNCC: 5 | RNVC: 2
C23201Q7895: RNCC: 5 | RNVC: 9

27 Aug 1992

3040-01-363-2330
Shouldered Shaft

013632330
13102-1064: RNCC: 3 | RNVC: 9

27 Aug 1992

3040-01-362-5688
Shouldered Shaft

013625688
3C4010P07: RNCC: 3 | RNVC: 2
3C4010: RNCC: D | RNVC: 9

9 Aug 1992

3040-01-362-5687
Shouldered Shaft

013625687
750396-1: RNCC: 3 | RNVC: 2
750396: RNCC: D | RNVC: 9

9 Aug 1992

3040-01-362-1562
Extension Shaft

013621562
29507842: RNCC: 3 | RNVC: 2
29507842: RNCC: 5 | RNVC: 2
29507842: RNCC: 5 | RNVC: 2
29507842: RNCC: 5 | RNVC: 9
29507842: RNCC: C | RNVC: 1

1 Aug 1992

3040-01-361-8255
Control Cam

013618255
12357482-1: RNCC: 3 | RNVC: 2
12357482-1: RNCC: 5 | RNVC: 9
12357482: RNCC: D | RNVC: 9

26 Jul 1992

3040-01-361-2843
Disc Brake Support Plate Assembly

013612843
5-42-7097-00-08: RNCC: 3 | RNVC: 9
5-42-7097-00: RNCC: 5 | RNVC: 9

13 Jul 1992

3040-01-361-0622
Linear Actuating Cylinder Piston

013610622
6962-06: RNCC: 3 | RNVC: 2
6962-06: RNCC: 5 | RNVC: 9
8909A351-001: RNCC: D | RNVC: 9

8 Jul 1992

3040-01-361-0618
Manual Control Lever

013610618
6I0484: RNCC: 3 | RNVC: 2
6I0484: RNCC: 5 | RNVC: 2
6I0484: RNCC: 5 | RNVC: 2

8 Jul 1992

3040-01-361-0360
Manual Control Lever

013610360
6I0482: RNCC: 3 | RNVC: 2
7E9429: RNCC: 3 | RNVC: 9
3040013610360: RNCC: 5 | RNVC: 9
7E9429: RNCC: 5 | RNVC: 9

8 Jul 1992

3040-01-360-9534
Extension Shaft

013609534
330935: RNCC: 3 | RNVC: 2
330935: RNCC: 5 | RNVC: 9
330935: RNCC: C | RNVC: 1

7 Jul 1992

3040-01-360-9138
Mechanical Drive Housing

013609138
432624: RNCC: 3 | RNVC: 9
432624: RNCC: 5 | RNVC: 2
432624: RNCC: 5 | RNVC: 9
432624: RNCC: 5 | RNVC: 9

4 Jul 1992

3040-01-360-2408
Linear Actuating Cylinder Assembly Parts Kit

013602408
6331-TC230: RNCC: 3 | RNVC: 2

20 Jun 1992

3040-01-359-8313
Counterbalance Weight

013598313
CBEG LKN: RNCC: 3 | RNVC: 9

13 Jun 1992

3040-01-359-7052
Brake Disc

013597052
226514: RNCC: 3 | RNVC: 2

10 Jun 1992

3040-01-359-4940
Shouldered Shaft

013594940
8445-28: RNCC: 3 | RNVC: 2

6 Jun 1992

3040-01-359-4939
Shaft Collar

013594939
417 263 01 23: RNCC: 3 | RNVC: 2
417 263 01 23: RNCC: 5 | RNVC: 2
417 263 01 23: RNCC: 5 | RNVC: 9

6 Jun 1992

3040-01-359-2460
Shaft Collar

013592460
417 263 03 23: RNCC: 3 | RNVC: 2
417 263 03 23: RNCC: 5 | RNVC: 2
417 263 03 23: RNCC: 5 | RNVC: 9

1 Jun 1992

3040-01-359-2461
Shaft Collar

013592461
417 263 00 23: RNCC: 3 | RNVC: 2
417 263 00 23: RNCC: 5 | RNVC: 2
441 263 02 23: RNCC: 5 | RNVC: 9
441 263 02 23: RNCC: 5 | RNVC: 9
417 263 00 23: RNCC: 5 | RNVC: 9

1 Jun 1992

3040-01-359-1159
Spur Gearshaft

013591159
246618: RNCC: 3 | RNVC: 2
8903157: RNCC: 5 | RNVC: 2

29 May 1992

3040-01-359-1070
Straight Shaft

013591070
4202259: RNCC: 3 | RNVC: 2
246399: RNCC: 5 | RNVC: 9

29 May 1992

3040-01-358-2063
Shouldered Shaft

013582063
435022: RNCC: 3 | RNVC: 2
435022: RNCC: 5 | RNVC: 9
433017: RNCC: 5 | RNVC: 9
435022: RNCC: C | RNVC: 1
435022: RNCC: C | RNVC: 1

9 May 1992

3040-01-357-5455
Rotating Shaft Eye Bracket

013575455
6P6851: RNCC: 3 | RNVC: 2

25 Apr 1992

3040-01-397-8507
Push-Pull Control Assembly

013978507
183-V-TT-3-55: RNCC: 3 | RNVC: 2
183-V-TT-3-55: RNCC: 3 | RNVC: 9

21 Oct 1994

3040-01-356-7041
Remote Control Lever

013567041
4446-034: RNCC: 3 | RNVC: 2

9 Apr 1992

3040-01-356-6946
Rigid Connecting Link

013566946
H2216000: RNCC: 3 | RNVC: 2
H2216000: RNCC: 3 | RNVC: 9
H2216000: RNCC: 5 | RNVC: 9

9 Apr 1992

3040-01-356-4738
Body Hub

013564738
228822: RNCC: 3 | RNVC: 2
617911: RNCC: 5 | RNVC: 9

4 Apr 1992

3040-01-356-4610
Mechanical Drive Housing

013564610
8589877: RNCC: 3 | RNVC: 2

4 Apr 1992

3040-01-356-4588
Shaft Collar

013564588
446451-1: RNCC: 3 | RNVC: 9
446451: RNCC: D | RNVC: 9

4 Apr 1992

3040-01-355-9169
Remote Control Lever

013559169
432638: RNCC: 3 | RNVC: 2
432638: RNCC: 5 | RNVC: 9
432638: RNCC: C | RNVC: 1
432638: RNCC: C | RNVC: 1

26 Mar 1992

3040-01-355-6282
Linear Actuating Cylinder Piston

013556282
227491: RNCC: 3 | RNVC: 2
40-010-041: RNCC: 5 | RNVC: 2
40-010-041: RNCC: C | RNVC: 1

20 Mar 1992

3040-01-354-7287
Shouldered Shaft

013547287
114C2866-4: RNCC: 3 | RNVC: 2

5 Mar 1992

3040-01-354-5451
Linear Actuating Cylinder Piston

013545451
R90038: RNCC: 3 | RNVC: 2
R90038: RNCC: 5 | RNVC: 9

29 Feb 1992

3040-01-393-9892
Counterbalance Weight

013939892
9443164AA-8: RNCC: 3 | RNVC: 2
9443164AA-8: RNCC: 3 | RNVC: 9
K-9443164AA-8: RNCC: 5 | RNVC: 9
9443164AA-8: RNCC: 5 | RNVC: 9
K-9443164AA-8: RNCC: 5 | RNVC: 9
K-9443164AA-8: RNCC: 5 | RNVC: 9
9443164AA-8: RNCC: C | RNVC: 1
K-9443164AA: RNCC: D | RNVC: 9

1 Aug 1994

3040-01-393-9895
Counterbalance Weight

013939895
9443164AA-7: RNCC: 3 | RNVC: 2
9443164AA-7: RNCC: 3 | RNVC: 9
9443164AA-7: RNCC: 5 | RNVC: 9
K-9443164AA-7: RNCC: 5 | RNVC: 9
K-9443164AA-7: RNCC: 5 | RNVC: 9
K-9443164AA-7: RNCC: 5 | RNVC: 9
9443164AA-7: RNCC: C | RNVC: 1
K-9443164AA: RNCC: D | RNVC: 9

1 Aug 1994

3040-01-393-9890
Counterbalance Weight

013939890
9443164AA-6: RNCC: 3 | RNVC: 9
K-9443164AA-6: RNCC: 5 | RNVC: 9
K-9443164AA-6: RNCC: 5 | RNVC: 9
9443164AA-6: RNCC: 5 | RNVC: 9
K-9443164AA-6: RNCC: 5 | RNVC: 9
9443164AA-6: RNCC: C | RNVC: 1
9443164AA-6: RNCC: C | RNVC: 1
K-9443164AA: RNCC: D | RNVC: 9

1 Aug 1994

3040-01-354-2917
Rigid Connecting Link

013542917
3350261: RNCC: 3 | RNVC: 2

26 Feb 1992

3040-01-353-7539
Linear Actuating Cylinder Piston

013537539
661248: RNCC: 3 | RNVC: 2
047158: RNCC: 5 | RNVC: 9
A47158: RNCC: 5 | RNVC: 9

15 Feb 1992

3040-01-353-7540
Linear Actuating Cylinder Piston

013537540
661390: RNCC: 3 | RNVC: 2
047172: RNCC: 5 | RNVC: 9
A47172: RNCC: D | RNVC: 9

15 Feb 1992

3040-01-353-7332
Piston Rod Guide

013537332
864-9537: RNCC: 3 | RNVC: 2

15 Feb 1992

3040-01-353-3835
Linear Actuating Cylinder Assembly Parts Kit

013533835
87024A9454: RNCC: 3 | RNVC: 2
430446B: RNCC: 5 | RNVC: 2

10 Feb 1992

3040-01-353-3836
Linear Actuating Cylinder Assembly Parts Kit

013533836
87024A9453: RNCC: 3 | RNVC: 2
87024A9453: RNCC: 5 | RNVC: 2

10 Feb 1992

3040-01-353-3837
Linear Actuating Cylinder Assembly Parts Kit

013533837
87024A9456: RNCC: 3 | RNVC: 2
87024A9456: RNCC: 5 | RNVC: 2

10 Feb 1992

3040-01-353-3834
Linear Actuating Cylinder Assembly Parts Kit

013533834
87024A9452: RNCC: 3 | RNVC: 2
87024A9452: RNCC: 5 | RNVC: 2

10 Feb 1992

3040-01-353-3108
Push-Pull Control Assembly

013533108
35483: RNCC: 3 | RNVC: 2
44232-012: RNCC: 5 | RNVC: 2
81A5029A0226: RNCC: 7 | RNVC: 2

8 Feb 1992

3040-01-353-0663
Electrical-Fluid Pressure Connector Assembly

013530663
507-0866: RNCC: 3 | RNVC: 9
507-0866: RNCC: 5 | RNVC: 2

5 Feb 1992

3040-01-353-0634
Mechanical Drive Housing

013530634
4045723: RNCC: 3 | RNVC: 2

5 Feb 1992

3040-01-353-0197
Shouldered Shaft

013530197
4102416: RNCC: 3 | RNVC: 2

5 Feb 1992

3040-01-352-0019
Shouldered Shaft

013520019
0623538D: RNCC: 3 | RNVC: 2

17 Jan 1992

3040-01-352-0018
Shouldered Shaft

013520018
0623537F: RNCC: 3 | RNVC: 2

17 Jan 1992

3040-01-351-9086
Shouldered Shaft Assembly

013519086
87024A4130: RNCC: 3 | RNVC: 2
87024A4130: RNCC: 5 | RNVC: 2

17 Jan 1992

3040-01-351-9085
Linear Actuating Cylinder Assembly Parts Kit

013519085
87024A9455: RNCC: 3 | RNVC: 2
87024A9455: RNCC: 5 | RNVC: 2

17 Jan 1992

3040-01-351-8328
Ball Joint

013518328
A032267: RNCC: 3 | RNVC: 9
49007: RNCC: 5 | RNVC: 2
24623-001: RNCC: 5 | RNVC: 2
81A5029A0232: RNCC: 7 | RNVC: 2

15 Jan 1992

3040-01-351-6033
Shaft Retaining Plate

013516033
3G18770200: RNCC: 3 | RNVC: 2
7939193514 ITEM 12: RNCC: 5 | RNVC: 9

11 Jan 1992

3040-01-351-6034
Shaft Retaining Plate

013516034
7032514000: RNCC: 3 | RNVC: 2
7939193514 ITEM 21: RNCC: 5 | RNVC: 9

11 Jan 1992

3040-01-351-6028
Push-Pull Control Assembly

013516028
D068357-003-072: RNCC: 3 | RNVC: 9
068357-03-072.0: RNCC: 5 | RNVC: 2
068357-03-072.0: RNCC: 5 | RNVC: 9
4063-003-0072: RNCC: 5 | RNVC: 9
D068357-003-072: RNCC: 5 | RNVC: 9
141989: RNCC: 5 | RNVC: 9
D68357: RNCC: D | RNVC: 9

11 Jan 1992

3040-01-351-6030
Body Hub

013516030
4G19177332: RNCC: 3 | RNVC: 2
7938197332: RNCC: 5 | RNVC: 2
7939193514 ITEM 4: RNCC: 5 | RNVC: 9

11 Jan 1992

3040-01-351-5935
Counterbalance Weight

013515935
095-04400: RNCC: 3 | RNVC: 2
095-04400: RNCC: 5 | RNVC: 9

11 Jan 1992

3040-01-351-5797
Counterbalance Weight

013515797
095-04600: RNCC: 3 | RNVC: 2
095-04600: RNCC: 5 | RNVC: 9

11 Jan 1992

3040-01-389-7842
Counterbalance Weight

013897842
236B2275-1: RNCC: 3 | RNVC: 9
511L333FA ITEM 30: RNCC: 5 | RNVC: 9
511L333FA ITEM 30: RNCC: C | RNVC: 1
511L333FA ITEM 30: RNCC: C | RNVC: 1
236B2275-1: RNCC: C | RNVC: 1
236B2275-1: RNCC: C | RNVC: 1
511L333FA: RNCC: D | RNVC: 9

3 May 1994

3040-01-389-7817
Counterbalance Weight

013897817
236B2275-2: RNCC: 3 | RNVC: 9
511L333FA ITEM 31: RNCC: 5 | RNVC: 9
511L333FA ITEM 31: RNCC: C | RNVC: 1
236B2275-2: RNCC: C | RNVC: 1
511L333FA ITEM 31: RNCC: C | RNVC: 1
236B2275-2: RNCC: C | RNVC: 1
511L333FA: RNCC: D | RNVC: 9

3 May 1994

Load More Results