What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 149 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 149 of 300

3040-01-541-1480
Linear Actuating Cylinder Assembly

015411480
657AL117: RNCC: 3 | RNVC: 2

16 Jun 2006

3040-01-540-8490
Rigid Connecting Link

015408490
7276169: RNCC: 3 | RNVC: 2

6 Jun 2006

3040-01-540-7588
Mechanical Drive Housing

015407588
TAS853001B7: RNCC: 3 | RNVC: 2

1 Jun 2006

3040-01-540-7578
Worm Shaft

015407578
HFB704100A1: RNCC: 3 | RNVC: 2

1 Jun 2006

3040-01-540-5380
Manual Control Lever Assembly

015405380
RP2: RNCC: 3 | RNVC: 2
1001285: RNCC: 5 | RNVC: 2

23 May 2006

3040-01-540-5373
Collar Lock Kit

015405373
1900029: RNCC: 3 | RNVC: 2

23 May 2006

3040-01-539-9984
Linear Actuating Cylinder Piston

015399984
923828.0909: RNCC: 3 | RNVC: 2
923828.0909: RNCC: 5 | RNVC: 2
CV187145: RNCC: 5 | RNVC: 2
923828.0909: RNCC: 5 | RNVC: 2
9238280909: RNCC: 5 | RNVC: 9

5 May 2006

3040-01-539-9359
Linear Actuating Cylinder Assembly Parts Kit

015399359
AH161589: RNCC: 3 | RNVC: 2
AH161589: RNCC: 5 | RNVC: 2
AH161589: RNCC: 5 | RNVC: 2
AH161589: RNCC: 5 | RNVC: 9
AH161589: RNCC: 5 | RNVC: 9
AH161589: RNCC: 5 | RNVC: 9

4 May 2006

3040-01-539-9352
Linear Actuating Cylinder Assembly Parts Kit

015399352
AHC16683: RNCC: 3 | RNVC: 2
AH149814: RNCC: 3 | RNVC: 9
AHC16683: RNCC: 5 | RNVC: 2
AH149814: RNCC: 5 | RNVC: 9
AHC16683: RNCC: 5 | RNVC: 9
AHC16683: RNCC: 5 | RNVC: 9
AHC16683: RNCC: C | RNVC: 1

4 May 2006

3040-01-539-8174
Shouldered Shaft

015398174
14-1137-002: RNCC: 3 | RNVC: 2
14-1137: RNCC: D | RNVC: 9

2 May 2006

3040-01-539-8165
Shouldered Shaft

015398165
4KP222: RNCC: 3 | RNVC: 2
4KP222: RNCC: 3 | RNVC: 9

2 May 2006

3040-01-539-8137
Linear Actuating Cylinder Cap

015398137
9238280896: RNCC: 3 | RNVC: 2
923828.0896: RNCC: 5 | RNVC: 2
923828.0896: RNCC: 5 | RNVC: 2
CV187140: RNCC: 5 | RNVC: 2

2 May 2006

3040-01-539-6456
Special Input Shaft

015396456
4KP225: RNCC: 3 | RNVC: 2
4KP225: RNCC: 3 | RNVC: 9
70225-17925: RNCC: 5 | RNVC: 2

27 Apr 2006

3040-01-539-5906
Straight Shaft

015395906
4N-6132: RNCC: 3 | RNVC: 2

26 Apr 2006

3040-01-539-5424
Ball Joint

015395424
7KK597: RNCC: 3 | RNVC: 2
7KK597: RNCC: 5 | RNVC: 9

25 Apr 2006

3040-01-539-4808
Linear Actuating Cylinder Cap

015394808
9239762759: RNCC: 3 | RNVC: 2
923976.2759: RNCC: 5 | RNVC: 2
CV187242: RNCC: 5 | RNVC: 2
923976.2759: RNCC: 5 | RNVC: 2

24 Apr 2006

3040-01-539-1916
Linear Actuating Cylinder Cap

015391916
923976.2735: RNCC: 3 | RNVC: 2
CV187251: RNCC: 5 | RNVC: 2
923976.2784: RNCC: 5 | RNVC: 2
923976.2784: RNCC: 5 | RNVC: 2
9239762784: RNCC: 5 | RNVC: 9

13 Apr 2006

3040-01-538-4208
Straight Shaft

015384208
DGMT0081: RNCC: 3 | RNVC: 2

21 Mar 2006

3040-01-537-1790
Spur Gearshaft

015371790
1585-4250-2: RNCC: 3 | RNVC: 2
15875-2425-0: RNCC: 3 | RNVC: 2

27 Jan 2006

3040-01-536-8679
Rigid Connecting Link

015368679
70104-08021-102: RNCC: 3 | RNVC: 2
70104-08021: RNCC: D | RNVC: 9

19 Jan 2006

3040-01-536-0847
Body Hub

015360847
008-285-10: RNCC: 3 | RNVC: 9

20 Dec 2005

3040-01-535-8705
Shock Absorber Guide

015358705
67DP 17575 751: RNCC: 3 | RNVC: 2
67DP-17575-75: RNCC: 5 | RNVC: 9

14 Dec 2005

3040-01-535-5151
Body Hub

015355151
0802-1137: RNCC: 3 | RNVC: 2

2 Dec 2005

3040-01-535-5105
Straight Shaft

015355105
106A0271: RNCC: 3 | RNVC: 2

2 Dec 2005

3040-01-535-2813
Shouldered Shaft

015352813
233-2345: RNCC: 3 | RNVC: 2

22 Nov 2005

3040-01-535-2378
Planetary Gears Carrier

015352378
225-8807: RNCC: 3 | RNVC: 2

21 Nov 2005

3040-01-535-0376
Straight Axle

015350376
211-5238: RNCC: 3 | RNVC: 2
211-5238: RNCC: 5 | RNVC: 2

14 Nov 2005

3040-01-535-0369
Straight Axle

015350369
227-4355: RNCC: 3 | RNVC: 2

14 Nov 2005

3040-01-534-4311
Electrical-Fluid Pressure Connector Assembly

015344311
6370 001 000: RNCC: 3 | RNVC: 2
AV2161310: RNCC: 5 | RNVC: 2

21 Oct 2005

3040-01-534-0877
Shouldered Shaft Assembly

015340877
4W6955: RNCC: 3 | RNVC: 2

6 Oct 2005

3040-01-533-5995
Differential Spider

015335995
9R2491: RNCC: 3 | RNVC: 2

20 Sep 2005

3040-01-533-5994
Power Train Adapter

015335994
9R2483: RNCC: 3 | RNVC: 2

20 Sep 2005

3040-01-533-5993
Power Train Case Assembly

015335993
9R2480: RNCC: 3 | RNVC: 2

20 Sep 2005

3040-01-533-5992
Rear Axle Lever Assembly

015335992
9R0823: RNCC: 3 | RNVC: 2

20 Sep 2005

3040-01-533-5752
Manual Control Lever

015335752
2255640: RNCC: 3 | RNVC: 2
10077676: RNCC: 6 | RNVC: 9

20 Sep 2005

3040-01-533-5750
Shouldered Shaft

015335750
2255634: RNCC: 3 | RNVC: 2

20 Sep 2005

3040-01-533-5699
Manual Control Lever

015335699
2255625: RNCC: 3 | RNVC: 2
10077681: RNCC: 6 | RNVC: 9

20 Sep 2005

3040-01-533-5442
Shouldered Shaft

015335442
31411125: RNCC: 3 | RNVC: 2

20 Sep 2005

3040-01-533-0533
Power Train Shifting Fork

015330533
9R2506: RNCC: 3 | RNVC: 2

30 Aug 2005

3040-01-533-0534
Straight Shaft

015330534
9R2504: RNCC: 3 | RNVC: 2

30 Aug 2005

3040-01-532-8111
Mechanical Drive Housing

015328111
5146552: RNCC: 3 | RNVC: 2
8KK672: RNCC: C | RNVC: 1

22 Aug 2005

3040-01-532-6035
Linear Actuating Cylinder Assembly

015326035
2332629: RNCC: 3 | RNVC: 2

12 Aug 2005

3040-01-532-6036
Hydraulic Accumulator Piston Rod

015326036
2332631: RNCC: 3 | RNVC: 2

12 Aug 2005

3040-01-532-5920
Hydraulic Accumulator Piston Rod

015325920
2332573: RNCC: 3 | RNVC: 2

12 Aug 2005

3040-01-532-5921
Hydraulic Accumulator Piston Rod

015325921
2332576: RNCC: 3 | RNVC: 2

12 Aug 2005

3040-01-532-3072
Mate Aircraft Shaft

015323072
901-692-003-135: RNCC: 3 | RNVC: 2

4 Aug 2005

3040-01-532-2988
Rigid Connecting Link

015322988
901-301-023-127: RNCC: 3 | RNVC: 2

4 Aug 2005

3040-01-532-2975
Rigid Connecting Link

015322975
901-301-023-125: RNCC: 3 | RNVC: 2

4 Aug 2005

3040-01-532-2959
Rigid Connecting Link

015322959
901-301-023-111: RNCC: 3 | RNVC: 2

4 Aug 2005

3040-01-531-6477
Piston Ring

015316477
3080132: RNCC: 3 | RNVC: 2
7339MT-964-P4/ASY: RNCC: 5 | RNVC: 9
7339MT-964-PG: RNCC: 5 | RNVC: 9

18 Jul 2005

3040-01-531-4475
Housing Adapter

015314475
11581696: RNCC: 3 | RNVC: 2

8 Jul 2005

3040-01-531-3935
Big Cam Top Stop

015313935
3400034: RNCC: 3 | RNVC: 2

7 Jul 2005

3040-01-531-3316
Linear Actuating Cylinder Assembly

015313316
1600134-29: RNCC: 3 | RNVC: 2
1600134-29: RNCC: 5 | RNVC: 9
1600134: RNCC: D | RNVC: 9

5 Jul 2005

3040-01-531-3145
Spider Assy

015313145
1744643: RNCC: 3 | RNVC: 2

1 Jul 2005

3040-01-531-2547
Linear Actuating Cylinder Assembly

015312547
6446894: RNCC: 3 | RNVC: 2

29 Jun 2005

3040-01-531-1827
Rigid Connecting Link

015311827
F-WK-861-6 PC12: RNCC: 3 | RNVC: 2

28 Jun 2005

3040-01-531-1637
Carrier Planetary Kit

015311637
2097466: RNCC: 3 | RNVC: 2

24 Jun 2005

3040-01-530-9882
Short Shaft

015309882
20021A1201: RNCC: 3 | RNVC: 2

20 Jun 2005

3040-01-530-9871
Rigid Connecting Link

015309871
F-WK-861-1 PC11: RNCC: 3 | RNVC: 2

20 Jun 2005

3040-01-530-9679
Rigid Connecting Link

015309679
F-WK-861-6 PC11: RNCC: 3 | RNVC: 2

20 Jun 2005

3040-01-530-9052
Straight Shaft

015309052
20021A1101: RNCC: 3 | RNVC: 2

16 Jun 2005

3040-01-530-8353
Hydraulic Control Assembly

015308353
D-WK-861-15 REF 3: DRWG C30-114: RNCC: 3 | RNVC: 2
C30-114: RNCC: 3 | RNVC: 9
D-WK-861-15C30-144: RNCC: 5 | RNVC: 9

14 Jun 2005

3040-01-530-3156
Shouldered Shaft

015303156
44-55-459-02: RNCC: 3 | RNVC: 2

20 May 2005

3040-01-530-2641
Shouldered Shaft

015302641
102429: RNCC: 3 | RNVC: 2

19 May 2005

3040-01-530-1974
Breather

015301974
7T3251: RNCC: 3 | RNVC: 2
7T-3251: RNCC: 5 | RNVC: 2

18 May 2005

3040-01-530-1953
Breather

015301953
0551990: RNCC: 3 | RNVC: 2

18 May 2005

3040-01-530-1770
Ball Joint

015301770
2043080: RNCC: 3 | RNVC: 2

17 May 2005

3040-01-530-1461
Linear Actuating Cylinder Piston Rod

015301461
1783893: RNCC: 3 | RNVC: 2

17 May 2005

3040-01-530-1456
Controllable Swashplate

015301456
1730639: RNCC: 3 | RNVC: 2

17 May 2005

3040-01-529-9914
Linear Actuating Cylinder Assembly Parts Kit

015299914
376-9011: RNCC: 3 | RNVC: 2
185-7674: RNCC: 3 | RNVC: 9
2281778: RNCC: 5 | RNVC: 9

11 May 2005

3040-01-529-9901
Linear Actuating Cylinder Assembly Parts Kit

015299901
376-9017: RNCC: 3 | RNVC: 2
227-5350: RNCC: 5 | RNVC: 9
185-7025: RNCC: 5 | RNVC: 9

11 May 2005

3040-01-528-4218
Mechanical Drive Housing

015284218
11578939: RNCC: 3 | RNVC: 2

11 Mar 2005

3040-01-528-0533
Housing Adapter

015280533
2203-5060-X-5: RNCC: 3 | RNVC: 2
17-2-0233-1: RNCC: 3 | RNVC: 2

1 Mar 2005

3040-01-527-9729
Rigid Connecting Link

015279729
11581651: RNCC: 3 | RNVC: 2

25 Feb 2005

3040-01-527-8912
Remote Control Lever

015278912
1259167-1: RNCC: 3 | RNVC: 2
1259069-18: RNCC: 5 | RNVC: 2
1259069: RNCC: D | RNVC: 9

23 Feb 2005

3040-01-527-8176
Mechanical Drive Housing

015278176
70351-08002-044: RNCC: 3 | RNVC: 2

17 Feb 2005

3040-01-695-3033
Straight Shaft

016953033
213185-01: RNCC: 3 | RNVC: 2
213185-01: RNCC: 3 | RNVC: 9

27 May 2021

3040-01-527-6855
Spur Gearshaft

015276855
11581495: RNCC: 3 | RNVC: 2

11 Feb 2005

3040-01-527-6669
Shouldered Shaft

015276669
14362: RNCC: 3 | RNVC: 2

11 Feb 2005

3040-01-695-0768
Straight Shaft

016950768
334: RNCC: 3 | RNVC: 2
006718: RNCC: 7 | RNVC: 2

13 May 2021

3040-01-526-7619
Brake Drum

015267619
8V7623: RNCC: 3 | RNVC: 2

6 Jan 2005

3040-01-526-2959
Shouldered Shaft

015262959
138-1635: RNCC: 3 | RNVC: 2

14 Dec 2004

3040-01-526-2827
Pivot Shaft Assembly

015262827
05091101: RNCC: 3 | RNVC: 2

14 Dec 2004

3040-01-526-2819
Counterbalance Weight

015262819
05160202: RNCC: 3 | RNVC: 2

14 Dec 2004

3040-01-526-2815
Counterbalance Weight

015262815
05079602: RNCC: 3 | RNVC: 2

14 Dec 2004

3040-01-526-0390
Push-Pull Control Assembly

015260390
CCX63318: RNCC: 3 | RNVC: 2
301947-003-18FT: RNCC: 5 | RNVC: 9
3009-075-0550: RNCC: 5 | RNVC: 9

4 Dec 2004

3040-01-525-9707
Rigid Connecting Link

015259707
4KK634: RNCC: 3 | RNVC: 2
4KK634: RNCC: 3 | RNVC: 9
499-4426: RNCC: 5 | RNVC: 2

2 Dec 2004

3040-01-525-7732
Body Hub

015257732
3307085: RNCC: 3 | RNVC: 2
3307085: RNCC: 3 | RNVC: 9

23 Nov 2004

3040-01-690-6860
Rigid Connecting Link

016906860
HO6822: RNCC: 3 | RNVC: 2

26 Aug 2020

3040-01-525-5313
Rigid Connecting Link

015255313
11581524: RNCC: 3 | RNVC: 2

15 Nov 2004

3040-01-525-1033
Straight Shaft

015251033
05118500: RNCC: 3 | RNVC: 2

28 Oct 2004

3040-01-524-9709
Piston Ring

015249709
7127MSL-964-P15: RNCC: 3 | RNVC: 2
LP75-7127MSL-964-P1: RNCC: 5 | RNVC: 2
7127MSL-964-P15: RNCC: 5 | RNVC: 2

23 Oct 2004

3040-01-524-8129
Linear Actuating Cylinder Assembly Parts Kit

015248129
154-837-1670: RNCC: 3 | RNVC: 2
13048962: RNCC: 5 | RNVC: 2
60100038: RNCC: 5 | RNVC: 2
LP66 B0993-57: RNCC: 5 | RNVC: 2
154-837-1670: RNCC: 5 | RNVC: 2

11 Sep 2012

3040-01-524-7759
Rigid Connecting Link

015247759
4KK603: RNCC: 3 | RNVC: 2
4KK603: RNCC: 3 | RNVC: 9
496-7348: RNCC: 5 | RNVC: 2

15 Oct 2004

3040-01-524-7758
Shouldered Axle

015247758
4KK573: RNCC: 3 | RNVC: 2
4KK573: RNCC: 3 | RNVC: 9
370-6168: RNCC: 5 | RNVC: 2

15 Oct 2004

3040-01-524-7746
Shouldered Axle

015247746
4KK576: RNCC: 3 | RNVC: 2
4KK576: RNCC: 3 | RNVC: 9
370-7920: RNCC: 5 | RNVC: 2

15 Oct 2004

3040-01-524-4638
Nonrotating Shaft Eye Bracket

015244638
51969: RNCC: 3 | RNVC: 2
SG811-CF-MMC-010 PG 7-24 ITEM 1: RNCC: 5 | RNVC: 2

5 Oct 2004

3040-01-686-7675
Rigid Connecting Link

016867675
1544184: RNCC: 3 | RNVC: 2
1544184: RNCC: 5 | RNVC: 2
F8135-000734: RNCC: 6 | RNVC: 9

4 Mar 2020

3040-01-523-9513
Linear Actuating Cylinder Assembly

015239513
214-5097: RNCC: 3 | RNVC: 2

20 Sep 2004

3040-01-523-9430
Control Cable Assembly

015239430
164-1196: RNCC: 3 | RNVC: 2

20 Sep 2004

3040-01-523-9332
Flexible Shaft Assembly

015239332
202-7875: RNCC: 3 | RNVC: 2

20 Sep 2004

3040-01-686-3948
Tension Spring Assembly

016863948
6CB-11590-02-00: RNCC: 3 | RNVC: 2

12 Feb 2020

3040-01-686-3627
Counterbalance Weight

016863627
06100-08241-104: RNCC: 3 | RNVC: 2

11 Feb 2020

3040-01-523-7702
Mechanical Drive Housing Part

015237702
01603500: RNCC: 3 | RNVC: 2

15 Sep 2004

3040-01-523-7590
Linear Actuating Cylinder Assembly

015237590
192-3884: RNCC: 3 | RNVC: 2

15 Sep 2004

3040-01-523-7593
Linear Actuating Cylinder Assembly

015237593
206-3629: RNCC: 3 | RNVC: 2

15 Sep 2004

3040-01-523-7591
Linear Actuating Cylinder Assembly

015237591
206-0502: RNCC: 3 | RNVC: 2

15 Sep 2004

3040-01-523-7587
Linear Actuating Cylinder Assembly

015237587
206-0522: RNCC: 3 | RNVC: 2

15 Sep 2004

3040-01-523-7583
Linear Actuating Cylinder Assembly

015237583
206-0520: RNCC: 3 | RNVC: 2

15 Sep 2004

3040-01-523-7201
Hydraulic Accumulator

015237201
162-3961: RNCC: 3 | RNVC: 2

14 Sep 2004

3040-01-523-7167
Flexible Shaft Assembly

015237167
238-9546: RNCC: 3 | RNVC: 2

14 Sep 2004

3040-01-523-5685
T Differential Case

015235685
3247680: RNCC: 3 | RNVC: 2
3247680: RNCC: 5 | RNVC: 9

8 Sep 2004

3040-01-523-5459
Flexible Shaft Assembly

015235459
184-5417: RNCC: 3 | RNVC: 2

8 Sep 2004

3040-01-523-5460
Flexible Shaft Assembly

015235460
4616187: RNCC: 3 | RNVC: 2
210-5946: RNCC: 5 | RNVC: 9

8 Sep 2004

3040-01-523-4687
Ball Joint

015234687
218-4516: RNCC: 3 | RNVC: 2

3 Sep 2004

3040-01-523-4619
Breather

015234619
198-7812: RNCC: 3 | RNVC: 2

3 Sep 2004

3040-01-685-1601
Rigid Connecting Link

016851601
205-001-017-9: RNCC: 3 | RNVC: 2

4 Dec 2019

3040-01-522-6051
Linear Actuating Cylinder Piston

015226051
106-0336: RNCC: 3 | RNVC: 2
506-3004 PC. NO. 5: RNCC: 5 | RNVC: 2
506-3004: RNCC: D | RNVC: 9

5 Aug 2004

3040-01-522-3627
Manual Control Lever

015223627
047-117-00: RNCC: 3 | RNVC: 9

28 Jul 2004

3040-01-522-3609
Manual Control Lever

015223609
047-116-00: RNCC: 3 | RNVC: 9

28 Jul 2004

3040-01-522-2237
Speedometer-Tachometer Drive Adapter

015222237
NA005991: RNCC: 3 | RNVC: 2

22 Jul 2004

3040-01-522-1988
Friction Lining Set

015221988
040-211-02: RNCC: 3 | RNVC: 9

21 Jul 2004

3040-01-522-1604
Brake Backing Plate

015221604
036-094-03: RNCC: 3 | RNVC: 9

20 Jul 2004

3040-01-682-6026
Linear Actuating Cylinder

016826026
12628181-1: RNCC: 1 | RNVC: 2
776607: RNCC: 3 | RNVC: 2
12628181: RNCC: D | RNVC: 9

15 Aug 2019

3040-01-682-5820
Linear Actuating Cylinder

016825820
12628181-2: RNCC: 1 | RNVC: 2
776561: RNCC: 3 | RNVC: 2
12628181: RNCC: D | RNVC: 9

14 Aug 2019

3040-01-521-0577
Mechanical Drive Housing Part

015210577
7579004-021: RNCC: 3 | RNVC: 2
7579004-021: RNCC: 5 | RNVC: 2

8 Jun 2004

3040-01-521-0155
Flexible Shaft Assembly

015210155
216913: RNCC: 3 | RNVC: 2

7 Jun 2004

3040-01-520-7358
Brake Disc

015207358
102954: RNCC: 3 | RNVC: 2

25 May 2004

3040-01-520-3568
Manual Control Lever

015203568
107051-14: RNCC: 3 | RNVC: 2
VT3612-16C16C40-345-11 ITEM 20A: RNCC: 5 | RNVC: 2
VT3612-16C16C40-345: RNCC: D | RNVC: 9
6395248: RNCC: D | RNVC: 9

10 May 2004

3040-01-679-7110
Shaft Retaining Plate

016797110
168-6357: RNCC: 3 | RNVC: 2

8 Apr 2019

3040-01-519-5604
Shouldered Shaft

015195604
1HA317: RNCC: 3 | RNVC: 2
1HA317: RNCC: 3 | RNVC: 9
3324980MS: RNCC: 5 | RNVC: 2

23 Apr 2004

3040-01-519-2481
Mechanical Drive Housing

015192481
AXT/SA88100097: RNCC: 3 | RNVC: 2
AXT/SA88100098: RNCC: 3 | RNVC: 9

12 Apr 2004

3040-01-518-9755
Linear Actuating Cylinder Piston

015189755
G33747: RNCC: 3 | RNVC: 2

31 Mar 2004

3040-01-518-7123
Gearbox Parts Kit

015187123
3604: RNCC: 3 | RNVC: 9
627-328: RNCC: 5 | RNVC: 9
FIG 23 KEY 627-328 P/N 3604: RNCC: 5 | RNVC: 9

20 Mar 2004

3040-01-518-4961
Planetary Gears Carrier

015184961
29530498: RNCC: 3 | RNVC: 2
16KP803: RNCC: 5 | RNVC: 2
16KP803: RNCC: 5 | RNVC: 9

15 Mar 2004

3040-01-518-4926
Piston Ring Set

015184926
29530487: RNCC: 3 | RNVC: 2
16KP797: RNCC: 5 | RNVC: 2
16KP797: RNCC: 5 | RNVC: 9

15 Mar 2004

3040-01-518-4504
Worm Shaft

015184504
13005086: RNCC: 3 | RNVC: 2

12 Mar 2004

3040-01-518-4258
Straight Axle

015184258
2132910: RNCC: 3 | RNVC: 2

11 Mar 2004

3040-01-676-0092
Rigid Connecting Link

016760092
13763: RNCC: 3 | RNVC: 2

5 Oct 2018

3040-01-517-1848
Rigid Connecting Link

015171848
60326-004: RNCC: 3 | RNVC: 2

2 Feb 2004

3040-01-674-2957
Counterbalance Weight

016742957
06100-08241-102: RNCC: 3 | RNVC: 2

20 Jul 2018

3040-01-516-6221
Hydraulic Accumulator

015166221
SB0210-2.8E1/112S210CK004: RNCC: 3 | RNVC: 2

13 Jan 2004

3040-01-516-4805
Differential Spider

015164805
6393879-01 FIND 015: RNCC: 3 | RNVC: 2
685144-10620: RNCC: 5 | RNVC: 2

8 Jan 2004

3040-01-515-9969
Spur Gearshaft

015159969
7010163: RNCC: 3 | RNVC: 2

16 Dec 2003

3040-01-515-7590
Manual Control Lever Assembly

015157590
5T1645: RNCC: 3 | RNVC: 2

8 Dec 2003

3040-01-515-3785
Linear Actuating Cylinder Assembly Parts Kit

015153785
K272-0589: RNCC: 3 | RNVC: 9
623-5396-090: RNCC: 5 | RNVC: 9

24 Nov 2003

3040-01-515-3515
Linear Actuating Cylinder Assembly Parts Kit

015153515
SK-6445: RNCC: 3 | RNVC: 2
623-5393-090: RNCC: 5 | RNVC: 9

21 Nov 2003

3040-01-670-7139
Shaft Collar

016707139
HL97TF4: RNCC: 3 | RNVC: 2

2 Mar 2018

3040-01-670-6375
Remote Control Lever

016706375
06391-08001-041: RNCC: 3 | RNVC: 2

28 Feb 2018

3040-01-670-6382
Rigid Connecting Link

016706382
06306-10123-041: RNCC: 3 | RNVC: 2

28 Feb 2018

3040-01-515-2128
Hydraulic Accumulator

015152128
3376063: RNCC: 3 | RNVC: 2
3376063: RNCC: 3 | RNVC: 9
61348-1: RNCC: 5 | RNVC: 2

18 Nov 2003

3040-01-515-1049
Linear Actuating Cylinder Assembly

015151049
1KK485: RNCC: 3 | RNVC: 2
1KK485: RNCC: 5 | RNVC: 9
4109626: RNCC: 5 | RNVC: 9
6505505: RNCC: 5 | RNVC: 9

15 Nov 2003

3040-01-515-1031
Cylinder Rod

015151031
2HA133: RNCC: 3 | RNVC: 2
2HA133: RNCC: 3 | RNVC: 9
301560B: RNCC: 5 | RNVC: 2

15 Nov 2003

3040-01-670-3097
Rigid Connecting Link

016703097
167-6926191 PC 76: RNCC: 3 | RNVC: 2
167-6926191 REV E PC NO 76: RNCC: 5 | RNVC: 2

15 Feb 2018

3040-01-670-2741
Rigid Connecting Link

016702741
167-6926191 PC 68: RNCC: 3 | RNVC: 2
167-6926191 REV E PC NO 68: RNCC: 5 | RNVC: 2

13 Feb 2018

3040-01-670-2261
Rigid Connecting Link

016702261
167-6926191 PC 85 + 2.5": RNCC: 3 | RNVC: 2
B-090106X28A-CR: RNCC: 5 | RNVC: 2

12 Feb 2018

3040-01-670-2253
Rigid Connecting Link

016702253
167-6926191 PC 69: RNCC: 3 | RNVC: 2
167-6926191 REV E PC NO 69: RNCC: 5 | RNVC: 2

12 Feb 2018

3040-01-670-2242
Rigid Connecting Link

016702242
167-6926191 PC 58: RNCC: 3 | RNVC: 2
167-6926191 REV E PC NO 58: RNCC: 5 | RNVC: 2

12 Feb 2018

3040-01-670-2237
Rigid Connecting Link

016702237
167-6926191 PC 72: RNCC: 3 | RNVC: 2
167-6926191 REV E PC NO 72: RNCC: 5 | RNVC: 2

12 Feb 2018

3040-01-670-1847
Mechanically Actuated Spindle

016701847
167-6926191 PC 188: RNCC: 3 | RNVC: 2
167-6926191 REV E PC NO 188: RNCC: 5 | RNVC: 2

8 Feb 2018

3040-01-670-1817
Rigid Connecting Link

016701817
167-6926191 PC 60: RNCC: 3 | RNVC: 2
167-6926191 REV E PC NO 60: RNCC: 5 | RNVC: 2

8 Feb 2018

3040-01-514-9271
Brake Disc

015149271
K080282-002: RNCC: 3 | RNVC: 2
K080282-002: RNCC: 5 | RNVC: 9

10 Nov 2003

3040-01-514-7858
Shouldered Shaft

015147858
6V6641: RNCC: 3 | RNVC: 2

5 Nov 2003

3040-01-514-7812
Linear Actuating Cylinder Assembly Parts Kit

015147812
628-1404-090: RNCC: 3 | RNVC: 9
K272-0578: RNCC: 5 | RNVC: 9
623-5397-090: RNCC: 5 | RNVC: 9

5 Nov 2003

3040-01-514-5631
Linear Actuating Cylinder Assembly

015145631
623-6556: RNCC: 3 | RNVC: 9

29 Oct 2003

3040-01-514-5179
Manual Control Lever

015145179
2T3477: RNCC: 3 | RNVC: 2

28 Oct 2003

3040-01-514-5132
Body Hub

015145132
8R4087: RNCC: 3 | RNVC: 2

28 Oct 2003

3040-01-514-5119
Control Cam

015145119
5V6203: RNCC: 3 | RNVC: 2

28 Oct 2003

3040-01-514-2513
Balancer Righ Shaft

015142513
RE500448: RNCC: 3 | RNVC: 2
RE500448: RNCC: 5 | RNVC: 9

21 Oct 2003

3040-01-514-2302
Housing Adapter

015142302
6P4227: RNCC: 3 | RNVC: 2

21 Oct 2003

3040-01-514-1715
Body Hub

015141715
2T2552: RNCC: 3 | RNVC: 2

20 Oct 2003

3040-01-513-9344
Shouldered Shaft

015139344
RE500449: RNCC: 3 | RNVC: 2
RE500449: RNCC: 5 | RNVC: 9

9 Oct 2003

3040-01-513-8092
Shouldered Shaft

015138092
8036756: RNCC: 3 | RNVC: 2
0501 213 511: RNCC: 5 | RNVC: 9
8036756: RNCC: 5 | RNVC: 9

7 Oct 2003

3040-01-513-7435
Linear Actuating Cylinder Piston Rod

015137435
8036827: RNCC: 3 | RNVC: 2
8036827: RNCC: 5 | RNVC: 9

4 Oct 2003

3040-01-667-9205
Shouldered Shaft

016679205
HST12YW16-6: RNCC: 3 | RNVC: 2
HST12YW16-6: RNCC: 5 | RNVC: 2

3 Nov 2017

3040-01-513-5360
Pressure Regulator Shaft And Spring Assembly

015135360
29531017: RNCC: 3 | RNVC: 2

29 Sep 2003

3040-01-513-4608
Straight Shaft

015134608
1446300: RNCC: 3 | RNVC: 2
14463: RNCC: 5 | RNVC: 2

25 Sep 2003

3040-01-667-1222
Control Cam

016671222
6E5-45321-00-00: RNCC: 3 | RNVC: 2

4 Oct 2017

3040-01-667-1227
Mechanical Drive Housing Part

016671227
64P-45300-13-8D: RNCC: 3 | RNVC: 2

4 Oct 2017

3040-01-667-0414
Nonvehicular Propeller Shaft

016670414
6K1-45611-10-00: RNCC: 3 | RNVC: 2

2 Oct 2017

3040-01-667-0140
Control Cam

016670140
1168846-1: RNCC: 3 | RNVC: 2
1168846-1: RNCC: 3 | RNVC: 9
1168846-1: RNCC: 5 | RNVC: 9
1168846-1: RNCC: C | RNVC: 1

29 Sep 2017

3040-01-512-7434
Linear Actuating Cylinder

015127434
3419752: RNCC: 3 | RNVC: 2
3419752: RNCC: 3 | RNVC: 9
61379-3: RNCC: 5 | RNVC: 2

9 Sep 2003

3040-01-512-6377
Spur Gearshaft

015126377
9C00369-1: RNCC: 3 | RNVC: 2
3040PL0793715: RNCC: 6 | RNVC: 9

5 Sep 2003

3040-01-512-4973
Speedometer-Tachometer Drive Adapter

015124973
RE500824: RNCC: 3 | RNVC: 2

3 Sep 2003

3040-01-512-4541
Shouldered Shaft

015124541
42M7071: RNCC: 3 | RNVC: 2

2 Sep 2003

3040-01-512-4373
Linear Actuating Cylinder Assembly

015124373
3337857: RNCC: 3 | RNVC: 2
3337857: RNCC: 3 | RNVC: 9
140848B: RNCC: 5 | RNVC: 2

29 Aug 2003

3040-01-512-1026
Idler Pulley

015121026
R505567: RNCC: 3 | RNVC: 2

22 Aug 2003

3040-01-511-7107
Rigid Connecting Link

015117107
12485041: RNCC: 3 | RNVC: 2
12485041: RNCC: 5 | RNVC: 2
12485041: RNCC: 5 | RNVC: 2

14 Aug 2003

3040-01-511-7125
Rigid Connecting Link

015117125
1248503: RNCC: 3 | RNVC: 2
1248503: RNCC: 5 | RNVC: 2
1248503: RNCC: 5 | RNVC: 2

14 Aug 2003

3040-01-511-5739
Remote Control Lever

015115739
2378283: RNCC: 3 | RNVC: 2

12 Aug 2003

3040-01-510-2157
Assy-Lwr Hsg-Linatex

015102157
1059319: RNCC: 3 | RNVC: 2

15 Jul 2003

3040-01-510-2160
Assy-Upr Hsg-Linatex

015102160
1059320: RNCC: 3 | RNVC: 2

15 Jul 2003

3040-01-663-0999
Counterbalance Weight

016630999
7-5R2430113-003: RNCC: 3 | RNVC: 2

26 Apr 2017

3040-01-510-0165
Shaft Sprt Rail

015100165
1073003: RNCC: 3 | RNVC: 2

10 Jul 2003

3040-01-509-8334
Shouldered Shaft

015098334
XA-S01686-1: RNCC: 3 | RNVC: 2

3 Jul 2003

3040-01-509-8329
Bevel Gearshaft

015098329
XA-V-06600: RNCC: 3 | RNVC: 2

3 Jul 2003

3040-01-509-8277
Shouldered Shaft

015098277
3276P007: RNCC: 3 | RNVC: 2

3 Jul 2003

3040-01-509-1073
Linear Actuating Cylinder Assembly Parts Kit

015091073
2384462: RNCC: 3 | RNVC: 2
185-7667: RNCC: 5 | RNVC: 9

12 Jun 2003

3040-01-509-0456
Straight Shaft

015090456
C6204316331: RNCC: 3 | RNVC: 2
C6204316331: RNCC: 5 | RNVC: 9
10176118: RNCC: 6 | RNVC: 9

10 Jun 2003

3040-01-508-7390
Rigid Connecting Link

015087390
221302: RNCC: 3 | RNVC: 2

2 Jun 2003

3040-01-508-7384
Straight Shaft

015087384
221301: RNCC: 3 | RNVC: 2

2 Jun 2003

3040-01-508-4923
Rigid Connecting Link

015084923
7700927180140: RNCC: 3 | RNVC: 2

22 May 2003

3040-01-508-4918
Rigid Connecting Link

015084918
7700926180780: RNCC: 3 | RNVC: 2

22 May 2003

3040-01-508-4921
Rigid Connecting Link

015084921
7700927180030: RNCC: 3 | RNVC: 2

22 May 2003

3040-01-508-4906
Rigid Connecting Link

015084906
7139695: RNCC: 3 | RNVC: 2
7139695: RNCC: 5 | RNVC: 9

22 May 2003

3040-01-508-4876
Rigid Connecting Link

015084876
7139694: RNCC: 3 | RNVC: 2
7139694: RNCC: 5 | RNVC: 9

22 May 2003

3040-01-508-4858
Journal

015084858
7700601180770: RNCC: 3 | RNVC: 2

22 May 2003

3040-01-507-7982
Shouldered Shaft

015077982
SA-2678: RNCC: 3 | RNVC: 2
4791: RNCC: D | RNVC: 9

6 May 2003

3040-01-507-7907
Shouldered Shaft

015077907
SA-2637: RNCC: 3 | RNVC: 2
4792: RNCC: D | RNVC: 9

6 May 2003

3040-01-507-4035
Body Hub

015074035
7123-980: RNCC: 3 | RNVC: 2

28 Apr 2003

3040-01-507-3539
Housing Adapter

015073539
2624139: RNCC: 3 | RNVC: 2

25 Apr 2003

3040-01-656-7799
Bell Crank

016567799
68A413002-2005: RNCC: 3 | RNVC: 2

18 Jul 2016

3040-01-656-6791
Bell Crank

016566791
68A413002-2006: RNCC: 3 | RNVC: 2

13 Jul 2016

3040-01-506-1884
Mechanical Drive Housing

015061884
PS-1477SS: RNCC: 3 | RNVC: 2

25 Mar 2003

3040-01-506-1107
Friction Lining

015061107
9914.0433: RNCC: 3 | RNVC: 9

24 Mar 2003

3040-01-506-0699
Straight Axle

015060699
130-5451: RNCC: 3 | RNVC: 2

21 Mar 2003

3040-01-506-0236
Manual Control Lever

015060236
164-1211: RNCC: 3 | RNVC: 2

20 Mar 2003

3040-01-505-8964
Shouldered Axle

015058964
113-1150: RNCC: 3 | RNVC: 2

18 Mar 2003

3040-01-505-8747
Friction Lining Set

015058747
4515CD931: RNCC: 3 | RNVC: 9
M16WK117-1 AND M16WL117-2: RNCC: 5 | RNVC: 9

18 Mar 2003

3040-01-655-4248
Mechanical Drive Housing

016554248
3417501: RNCC: 3 | RNVC: 2

26 May 2016

3040-01-505-6936
Straight Axle

015056936
9R-8663: RNCC: 3 | RNVC: 2

12 Mar 2003

3040-01-505-6934
Straight Axle

015056934
9R-8594: RNCC: 3 | RNVC: 2
9R-8594: RNCC: 5 | RNVC: 9

12 Mar 2003

3040-01-505-6920
Straight Axle

015056920
8Y-7444: RNCC: 3 | RNVC: 2

12 Mar 2003

3040-01-505-6895
Straight Axle

015056895
165-6595: RNCC: 3 | RNVC: 2

12 Mar 2003

3040-01-505-6150
Flexible Shaft Assembly Casing

015056150
164-1042: RNCC: 3 | RNVC: 2

11 Mar 2003

3040-01-505-6046
Straight Axle

015056046
154-5280: RNCC: 3 | RNVC: 2
CV161024D: RNCC: 5 | RNVC: 2
154-5280: RNCC: 5 | RNVC: 2

11 Mar 2003

3040-01-505-6045
Straight Axle

015056045
154-5279: RNCC: 3 | RNVC: 2
CV161023D: RNCC: 5 | RNVC: 2
154-5279: RNCC: 5 | RNVC: 2

11 Mar 2003

3040-01-505-5405
Straight Shaft

015055405
465-5251: RNCC: 3 | RNVC: 9
465-5251: RNCC: 5 | RNVC: 2
10126945: RNCC: 6 | RNVC: 9
465-5251: RNCC: C | RNVC: 1

10 Mar 2003

3040-01-505-5439
Straight Axle

015055439
132-3778: RNCC: 3 | RNVC: 2
132-3778: RNCC: 5 | RNVC: 2

10 Mar 2003

3040-01-505-5437
Straight Axle

015055437
131-8775: RNCC: 3 | RNVC: 2

10 Mar 2003

3040-01-505-5438
Straight Axle

015055438
132-3777: RNCC: 3 | RNVC: 2
132-3777: RNCC: 5 | RNVC: 2

10 Mar 2003

3040-01-505-5268
Rigid Connecting Link

015055268
901-236-010-235: RNCC: 3 | RNVC: 2
901-236-010: RNCC: D | RNVC: 9

10 Mar 2003

3040-01-505-4740
Rotating Shaft Eye Bracket

015054740
901-236-010-279: RNCC: 3 | RNVC: 2
901-236-010: RNCC: D | RNVC: 9

7 Mar 2003

3040-01-505-4737
Rotating Shaft Eye Bracket

015054737
901-236-010-221: RNCC: 3 | RNVC: 2
901-236-010: RNCC: D | RNVC: 9

7 Mar 2003

3040-01-505-4033
Air Splined Adapter

015054033
901-047-663-101: RNCC: 3 | RNVC: 2

6 Mar 2003

3040-01-505-2995
Linear Actuating Cylinder Assembly

015052995
38R216D1: RNCC: 3 | RNVC: 2

3 Mar 2003

3040-01-505-2296
Shouldered Shaft

015052296
901-236-010-233: RNCC: 3 | RNVC: 2
901-236-010: RNCC: D | RNVC: 9

27 Feb 2003

3040-01-505-2262
Rigid Connecting Link

015052262
901-236-010-213: RNCC: 3 | RNVC: 2
901-236-010: RNCC: D | RNVC: 9

27 Feb 2003

3040-01-505-2030
Worm Shaft

015052030
901-236-010-237: RNCC: 3 | RNVC: 2
901-236-010: RNCC: D | RNVC: 9

26 Feb 2003

3040-01-505-2026
Worm Shaft

015052026
901-236-010-269: RNCC: 3 | RNVC: 2
901-236-010: RNCC: D | RNVC: 9

26 Feb 2003

3040-01-504-8928
Shaft Collar

015048928
054-8223-002: RNCC: 3 | RNVC: 2
M217-1813: RNCC: D | RNVC: 9

13 Feb 2003

3040-01-504-8490
Spur Gearshaft

015048490
3882697-4: RNCC: 3 | RNVC: 2
3882697: RNCC: D | RNVC: 9

12 Feb 2003

3040-01-504-7825
Manual Control Lever Assembly

015047825
35659EY-2: RNCC: 3 | RNVC: 2
46741-1: RNCC: D | RNVC: 9

10 Feb 2003

3040-01-504-7438
Straight Shaft

015047438
27818SL-2: RNCC: 3 | RNVC: 2

7 Feb 2003

3040-01-504-7440
Manual Control Lever

015047440
27733EY: RNCC: 3 | RNVC: 2

7 Feb 2003

3040-01-504-7419
Control Cam

015047419
220675: RNCC: 3 | RNVC: 2

7 Feb 2003

3040-01-504-7418
Shouldered Shaft

015047418
220686: RNCC: 3 | RNVC: 2

7 Feb 2003

3040-01-504-7052
Shouldered Shaft Assembly

015047052
47095: RNCC: 3 | RNVC: 2

6 Feb 2003

3040-01-504-5717
Manual Control Lever

015045717
NY-5K-14G-BK: RNCC: 3 | RNVC: 2
11463902-2: RNCC: 7 | RNVC: 2
11463902: RNCC: D | RNVC: 9

3 Feb 2003

3040-01-504-5452
Planetary Gears Carrier

015045452
8036311: RNCC: 3 | RNVC: 2
8036311: RNCC: 5 | RNVC: 9

31 Jan 2003

3040-01-653-0260
Shouldered Shaft

016530260
4A3902-1: RNCC: 3 | RNVC: 2

10 Mar 2016

3040-01-504-3922
Linear Actuating Cylinder Piston Rod

015043922
8035766: RNCC: 3 | RNVC: 2
8035766: RNCC: 5 | RNVC: 9

28 Jan 2003

3040-01-504-3470
Piston Rod Guide

015043470
8036370: RNCC: 3 | RNVC: 2
8036370: RNCC: 5 | RNVC: 9

27 Jan 2003

3040-01-504-2982
Planetary Gears Carrier

015042982
70023282: RNCC: 3 | RNVC: 2
8036414: RNCC: 5 | RNVC: 9
8036414: RNCC: 5 | RNVC: 9

24 Jan 2003

3040-01-504-2946
Linear Actuating Cylinder Piston Rod

015042946
8036369: RNCC: 3 | RNVC: 2
8036369: RNCC: 5 | RNVC: 9

24 Jan 2003

3040-01-652-4307
Counterbalance Weight

016524307
716028-5: RNCC: 3 | RNVC: 9
716028-5: RNCC: 5 | RNVC: 2

23 Feb 2016

3040-01-503-5690
Turbine Hub

015035690
215818D: RNCC: 3 | RNVC: 2

23 Dec 2002

3040-01-503-5689
Straight Shaft Assembly

015035689
X215853A: RNCC: 3 | RNVC: 2

23 Dec 2002

3040-01-503-3596
Worm Shaft

015033596
1321242: RNCC: 3 | RNVC: 2
1321242: RNCC: 5 | RNVC: 9
4475336074: RNCC: 5 | RNVC: 9

13 Dec 2002

3040-01-503-3465
Slotted Pin

015033465
1321154: RNCC: 3 | RNVC: 2
631328619: RNCC: 5 | RNVC: 9
1321154: RNCC: 5 | RNVC: 9

13 Dec 2002

3040-01-503-3300
Output Gear

015033300
7027271: RNCC: 3 | RNVC: 2
1320752: RNCC: 5 | RNVC: 9
1320752: RNCC: 5 | RNVC: 9

12 Dec 2002

3040-01-503-2739
Straight Shaft

015032739
60-3069-1: RNCC: 3 | RNVC: 2
60-3069: RNCC: D | RNVC: 9

11 Dec 2002

3040-01-503-2617
Housing Ii

015032617
1319568: RNCC: 3 | RNVC: 2
1319568: RNCC: 5 | RNVC: 9
4660301014: RNCC: 5 | RNVC: 9

10 Dec 2002

3040-01-503-0316
Straight Shaft

015030316
LG0370-05: RNCC: 3 | RNVC: 2
LG5191-700B: RNCC: D | RNVC: 9

2 Dec 2002

3040-01-503-0275
Straight Shaft

015030275
LG0259: RNCC: 3 | RNVC: 2
LG0369-05: RNCC: 5 | RNVC: 9
LG5191-700B: RNCC: D | RNVC: 9

2 Dec 2002

3040-01-502-9936
Mechanical Drive Housing

015029936
XB-LG0662: RNCC: 3 | RNVC: 2

27 Nov 2002

3040-01-502-9919
Mechanical Drive Housing

015029919
XB-LG0663: RNCC: 3 | RNVC: 2

27 Nov 2002

3040-01-502-7000
Rigid Connecting Link

015027000
3933606: RNCC: 3 | RNVC: 2

18 Nov 2002

3040-01-502-6798
Remote Control Lever

015026798
3968379: RNCC: 3 | RNVC: 2
3913327: RNCC: 3 | RNVC: 9

16 Nov 2002

3040-01-502-6597
Shaft Collar

015026597
3534451: RNCC: 3 | RNVC: 2

15 Nov 2002

3040-01-502-5762
Spur Gearshaft

015025762
2075-0096: RNCC: 3 | RNVC: 2

12 Nov 2002

3040-01-501-4729
Aircraf Input Shaft

015014729
2210324-1: RNCC: 3 | RNVC: 2

3 Oct 2002

3040-01-501-4407
Cylinder Gland

015014407
8D00234-12: RNCC: 3 | RNVC: 2

2 Oct 2002

3040-01-501-4388
Linear Actuating Cylinder Piston

015014388
8D00234-5: RNCC: 3 | RNVC: 2

2 Oct 2002

3040-01-501-0491
Shaftzzstaticzsealz

015010491
563-7286781-26: RNCC: 3 | RNVC: 1
H684-1505-26: RNCC: 5 | RNVC: 1
H684-1505-26L1: RNCC: 5 | RNVC: 2
563-7286781-26L1: RNCC: 5 | RNVC: 2

21 Sep 2002

3040-01-646-8133
Straight Axle

016468133
12446466: RNCC: 3 | RNVC: 2

31 Jul 2015

3040-01-646-8121
Straight Axle

016468121
12446469: RNCC: 3 | RNVC: 2

31 Jul 2015

3040-01-500-9338
Counterbalance Weight

015009338
7287199: RNCC: 3 | RNVC: 2
7287199: RNCC: 5 | RNVC: 2
7287194 FIND 335: RNCC: 5 | RNVC: 9

17 Sep 2002

3040-01-644-7716
Spur Gearshaft

016447716
528773: RNCC: 3 | RNVC: 9
PL86-K1 ILLUSTRATION C INDEX 32: RNCC: C | RNVC: 1

19 May 2015

3040-01-644-4688
Linear Actuating Cylinder Piston

016444688
501934: RNCC: 3 | RNVC: 9

7 May 2015

3040-01-644-4610
Shouldered Shaft

016444610
528713: RNCC: 3 | RNVC: 9

6 May 2015

3040-01-644-1550
Straight Shaft

016441550
4W-9325: RNCC: 3 | RNVC: 2

23 Apr 2015

3040-01-499-2484
Rigid Connecting Link

014992484
803-5184146 PC 12 PG 3 ZONE 18-A: RNCC: 3 | RNVC: 2
803-5184144 PC 50 PG 2 ZONE 13-C: RNCC: 5 | RNVC: 9
5184146: RNCC: D | RNVC: 9
5184144: RNCC: D | RNVC: 9

17 Jul 2002

3040-01-498-4628
Aircra Roller Shaft

014984628
901-020-531-113: RNCC: 3 | RNVC: 2
901-020-531: RNCC: D | RNVC: 9

27 Jun 2002

3040-01-641-7926
Shaft Collar

016417926
241-6244: RNCC: 3 | RNVC: 2

3 Feb 2015

3040-01-641-7878
Shaft Collar

016417878
251-1255: RNCC: 3 | RNVC: 2

3 Feb 2015

3040-01-496-8668
Gland Head

014968668
B107555: RNCC: 3 | RNVC: 2

30 Apr 2002

3040-01-496-5171
Multiple Gears Gearshaft

014965171
1707502: RNCC: 3 | RNVC: 2

18 Apr 2002

3040-01-496-4103
Shouldered Shaft Assembly

014964103
29535234: RNCC: 3 | RNVC: 2

15 Apr 2002

3040-01-496-4061
Planetary Gears Carrier

014964061
29537926: RNCC: 3 | RNVC: 2

15 Apr 2002

3040-01-496-0330
Cable Guide

014960330
07.0703.0272: RNCC: 3 | RNVC: 9
07.0703.0272: RNCC: 5 | RNVC: 2

29 Mar 2002

3040-01-496-0329
Cable Guide

014960329
07.0703.0269: RNCC: 3 | RNVC: 9
07.0703.0269: RNCC: 5 | RNVC: 2

29 Mar 2002

3040-01-496-0065
S Shaft

014960065
3245E001: RNCC: 3 | RNVC: 2

29 Mar 2002

3040-01-496-0052
Drive Shaft Ch.1695

014960052
09.4635.0017: RNCC: 3 | RNVC: 9
09.4635.0017: RNCC: 5 | RNVC: 2

29 Mar 2002

3040-01-495-8104
Body Hub

014958104
35085398: RNCC: 3 | RNVC: 2

26 Mar 2002

3040-01-495-7566
Head

014957566
07.0721.0030: RNCC: 3 | RNVC: 2

25 Mar 2002

3040-01-495-7373
Side Shift Fem2 1

014957373
09.0803.0106: RNCC: 3 | RNVC: 9
09.0803.0106: RNCC: 5 | RNVC: 2

23 Mar 2002

3040-01-495-7274
Cylinder Body

014957274
07.0735.0019: RNCC: 3 | RNVC: 2
3721449: RNCC: 5 | RNVC: 2

23 Mar 2002

3040-01-495-7261
Side Shift Cylinder

014957261
07.0735.0015: RNCC: 3 | RNVC: 9
07.0735.0015: RNCC: 5 | RNVC: 2

23 Mar 2002

3040-01-495-7260
Side Shift Rail

014957260
07.0735.0011: RNCC: 3 | RNVC: 2
10925029: RNCC: 5 | RNVC: 2

23 Mar 2002

3040-01-495-7207
Counterweight

014957207
51.1000.1100: RNCC: 3 | RNVC: 2

22 Mar 2002

3040-01-495-6719
Spacer Cylinder Extension

014956719
07.0721.0014: RNCC: 3 | RNVC: 2

22 Mar 2002

3040-01-495-6696
Head

014956696
07.0721.0006: RNCC: 3 | RNVC: 9
07.0721.0006: RNCC: 5 | RNVC: 2

22 Mar 2002

3040-01-495-6371
Housing Adapter

014956371
6104-GM: RNCC: 3 | RNVC: 2

21 Mar 2002

3040-01-495-6315
Double Joint

014956315
07.0711.0129: RNCC: 3 | RNVC: 2
139530: RNCC: 5 | RNVC: 2

21 Mar 2002

3040-01-495-6087
Wheel Hub Kit

014956087
07.0711.0090: RNCC: 3 | RNVC: 2
065964: RNCC: 5 | RNVC: 2

21 Mar 2002

3040-01-495-6076
Axle Housing

014956076
07.0711.0211: RNCC: 3 | RNVC: 2
144536: RNCC: 5 | RNVC: 2

21 Mar 2002

3040-01-495-5687
Spiders

014955687
07.0711.0086: RNCC: 3 | RNVC: 2
046209: RNCC: 5 | RNVC: 2

20 Mar 2002

3040-01-495-5661
Double Joint Rh

014955661
07.0711.0083: RNCC: 3 | RNVC: 2
139529: RNCC: 5 | RNVC: 2

20 Mar 2002

3040-01-495-5656
Double Joint Lh

014955656
07.0711.0082: RNCC: 3 | RNVC: 2
139528: RNCC: 5 | RNVC: 2

20 Mar 2002

3040-01-495-2986
Shaft With Flange

014952986
07.0711.0164: RNCC: 3 | RNVC: 2
135599: RNCC: 5 | RNVC: 2

12 Mar 2002

3040-01-495-2205
Speed Level

014952205
07.0703.0116: RNCC: 3 | RNVC: 2

9 Mar 2002

3040-01-495-2168
Complete Hand Brake Lever

014952168
05.4315.0001: RNCC: 3 | RNVC: 2
60002: RNCC: 5 | RNVC: 9
60004: RNCC: 5 | RNVC: 9

9 Mar 2002

3040-01-495-0027
Shouldered Shaft

014950027
J7455-2: RNCC: 3 | RNVC: 2

4 Mar 2002

3040-01-632-6164
Piston Ring

016326164
N73057: RNCC: 3 | RNVC: 1
36937N-4-A-S-18: RNCC: 5 | RNVC: 1

24 Oct 2014

3040-01-493-4535
Push-Pull Control Assembly

014934535
A-47395-2: RNCC: 3 | RNVC: 2
0RO-47395-002: RNCC: 5 | RNVC: 2

8 Jan 2002

3040-01-492-8466
Multiple Gears Gearshaft

014928466
99613004-01: RNCC: 3 | RNVC: 9
99613004-01: RNCC: C | RNVC: 1
99613004: RNCC: D | RNVC: 9

14 Dec 2001

3040-01-630-7191
Shouldered Shaft

016307191
300317-2-2: RNCC: 3 | RNVC: 1

14 Aug 2014

3040-01-630-7192
Shouldered Shaft

016307192
300318-2-2: RNCC: 3 | RNVC: 1

14 Aug 2014

3040-01-630-1185
Control Cam

016301185
3060G44PC1: RNCC: 3 | RNVC: 9
4009G87PN008: RNCC: 5 | RNVC: 2
3060G44PC1: RNCC: C | RNVC: 1
3060G44PC1: RNCC: C | RNVC: 1

25 Jul 2014

3040-01-630-0148
Control Cam

016300148
3060G46PC1: RNCC: 3 | RNVC: 9
4009G87PN009: RNCC: 5 | RNVC: 2
3060G46PC1: RNCC: C | RNVC: 1
3060G46PC1: RNCC: C | RNVC: 1

23 Jul 2014

3040-01-629-9654
Control Cam

016299654
3060G45PC1: RNCC: 3 | RNVC: 9
4009G87PN004: RNCC: 5 | RNVC: 2
3060G45PC1: RNCC: C | RNVC: 1
3060G45PC1: RNCC: C | RNVC: 1

21 Jul 2014

3040-01-629-9617
Straight Shaft

016299617
3060G58PC1: RNCC: 3 | RNVC: 9
4009G87PN016: RNCC: 5 | RNVC: 2
3060G58PC1: RNCC: C | RNVC: 1
3060G58PC1: RNCC: C | RNVC: 1

21 Jul 2014

3040-01-491-9273
Shouldered Shaft

014919273
148K0022-1: RNCC: 3 | RNVC: 2
148K0022-1: RNCC: 3 | RNVC: 9
148K0022-1: RNCC: 5 | RNVC: 9
148K0022: RNCC: D | RNVC: 9

6 Nov 2001

3040-01-629-8967
Control Cam

016298967
3009G78PC1: RNCC: 3 | RNVC: 9
4009G87PN006: RNCC: 5 | RNVC: 2
3009G78PC1: RNCC: C | RNVC: 1
3009G78PC1: RNCC: C | RNVC: 1

18 Jul 2014

3040-01-629-7033
Control Cam

016297033
3060G56PC1: RNCC: 3 | RNVC: 9
4009G87PN002: RNCC: 5 | RNVC: 2
3060G56PC1: RNCC: C | RNVC: 1
3060G56PC1: RNCC: C | RNVC: 1

11 Jul 2014

3040-01-629-7002
Control Cam

016297002
3060G55PC1: RNCC: 3 | RNVC: 9
4009G87PN003: RNCC: 5 | RNVC: 2
3060G55PC1: RNCC: C | RNVC: 1
3060G55PC1: RNCC: C | RNVC: 1

11 Jul 2014

3040-01-629-6827
Control Cam

016296827
3060G43PC1: RNCC: 3 | RNVC: 9
4009G87PN005: RNCC: 5 | RNVC: 2
3060G43PC1: RNCC: C | RNVC: 1
3060G43PC1: RNCC: C | RNVC: 1

10 Jul 2014

3040-01-629-1170
Worm Shaft

016291170
235974: RNCC: 3 | RNVC: 1
132698ITEM006: RNCC: 5 | RNVC: 1

18 Jun 2014

3040-01-628-6539
Worm Wheel Gearshaft

016286539
3060G61PC1: RNCC: 3 | RNVC: 9
4009G88PN011: RNCC: 5 | RNVC: 2
3060G61PC1: RNCC: C | RNVC: 1
3060G61PC1: RNCC: C | RNVC: 1

4 Jun 2014

3040-01-627-7582
Rigid Connecting Link

016277582
A-P8A008-101: RNCC: 3 | RNVC: 2

9 Sep 2020

3040-01-490-6182
Straight Shaft

014906182
1027: RNCC: 3 | RNVC: 2

2 Oct 2001

3040-01-625-6343
Differential Spider

016256343
480596-T1: RNCC: 3 | RNVC: 1
6054468ITEMH46: RNCC: 5 | RNVC: 9
6054470ITEMH46: RNCC: D | RNVC: 9
6053192-701: RNCC: D | RNVC: 9

10 Feb 2014

3040-01-625-6335
Differential Spider

016256335
481978-T1: RNCC: 3 | RNVC: 1
6054470ITEMH42: RNCC: 5 | RNVC: 9
6053169-701: RNCC: D | RNVC: 9
6054468ITEMH42: RNCC: D | RNVC: 9

10 Feb 2014

3040-01-625-6316
Differential Spider

016256316
481690-T1: RNCC: 3 | RNVC: 1
6054471ITEMH46: RNCC: 5 | RNVC: 9
6054469ITEMH46: RNCC: D | RNVC: 9
6053195-701: RNCC: D | RNVC: 9

10 Feb 2014

3040-01-625-6303
Differential Spider

016256303
481939-T1: RNCC: 3 | RNVC: 1
6054469ITEMH42: RNCC: 5 | RNVC: 9
6053194-701: RNCC: D | RNVC: 9
6054471ITEMH42: RNCC: D | RNVC: 9

10 Feb 2014

3040-01-625-5795
Rigid Connecting Link

016255795
1B1172-1: RNCC: 3 | RNVC: 2

7 Feb 2014

3040-01-625-4931
Shouldered Shaft

016254931
K0607: RNCC: 3 | RNVC: 9

5 Feb 2014

3040-01-625-0751
Nonvehicular Propeller Shaft

016250751
6CB-45611-00-00: RNCC: 3 | RNVC: 2

23 Jan 2014

3040-01-488-9287
Oscillating Pin

014889287
40001267: RNCC: 3 | RNVC: 2

6 Sep 2001

3040-01-487-6623
Shouldered Shaft

014876623
13481256: RNCC: 3 | RNVC: 2

14 Aug 2001

3040-01-487-3897
Shouldered Shaft

014873897
4101452: RNCC: 3 | RNVC: 2
4101452: RNCC: 5 | RNVC: 9

3 Aug 2001

3040-01-622-0561
Shouldered Shaft

016220561
26837032: RNCC: 3 | RNVC: 2
U26837032: RNCC: 5 | RNVC: 2
Y00014342: RNCC: 5 | RNVC: 2

26 Sep 2013

3040-01-487-1658
Stop Collar

014871658
37693: RNCC: 3 | RNVC: 2
MHC197: RNCC: 5 | RNVC: 2
309908: RNCC: 5 | RNVC: 9
37693: RNCC: 5 | RNVC: 9
309908: RNCC: C | RNVC: 1

26 Jul 2001

3040-01-487-0550
Rigid Connecting Link

014870550
212-076-151-7: RNCC: 3 | RNVC: 2

23 Jul 2001

3040-01-621-4680
Straight Shaft

016214680
6061758-701: RNCC: 3 | RNVC: 2
6061758-701: RNCC: 3 | RNVC: 9
6061758-701: RNCC: 5 | RNVC: 9
6062234-701: RNCC: 5 | RNVC: 9
6052834-701: RNCC: 5 | RNVC: 9
6052834-701: RNCC: C | RNVC: 1
6062234-701: RNCC: C | RNVC: 1
6052834-701: RNCC: C | RNVC: 1
6062234-701: RNCC: C | RNVC: 1

9 Sep 2013

3040-01-619-5060
Straight Shaft

016195060
6061756-701: RNCC: 3 | RNVC: 9
6061756-701: RNCC: 5 | RNVC: 2
6052834ITEM8: RNCC: 5 | RNVC: 9
6062234ITEM35: RNCC: 5 | RNVC: 9
6061756-701: RNCC: C | RNVC: 1
6062234ITEM35: RNCC: C | RNVC: 1
6052834ITEM8: RNCC: C | RNVC: 1
6061756-701: RNCC: C | RNVC: 1
6062234ITEM35: RNCC: C | RNVC: 1
6052834ITEM8: RNCC: C | RNVC: 1

4 Jun 2013

3040-01-485-1392
Pawlzzzzzzzzzzzzzzz

014851392
46049: RNCC: 3 | RNVC: 2
3616890400: RNCC: 5 | RNVC: 2

17 May 2001

3040-01-485-0385
Straight Shaft

014850385
3803166: RNCC: 3 | RNVC: 2

15 May 2001

3040-01-484-6557
Shaft Retaining Plate

014846557
3064583: RNCC: 3 | RNVC: 2

3 May 2001

3040-01-484-5889
Rigid Connecting Link

014845889
923899.0484: RNCC: 3 | RNVC: 2
923899.0484: RNCC: 5 | RNVC: 2
9238990484: RNCC: 5 | RNVC: 9

2 May 2001

3040-01-484-4813
Linear Actuating Cylinder Assembly

014844813
923899.0419: RNCC: 3 | RNVC: 2
9238990419: RNCC: 5 | RNVC: 9

30 Apr 2001

3040-01-617-4025
Shouldered Shaft

016174025
6057319-701: RNCC: 3 | RNVC: 9

21 Mar 2013

3040-01-615-9803
Rigid Connecting Link

016159803
145CS360-4: RNCC: 3 | RNVC: 2

29 Jan 2013

3040-01-483-5664
Mechanical Drive Housing Part

014835664
7579683-001: RNCC: 3 | RNVC: 2
7579683-001: RNCC: 3 | RNVC: 2
7579683-001: RNCC: 5 | RNVC: 9

2 Apr 2001

3040-01-615-0847
Counterbalance Weight

016150847
7-5R2430118-001: RNCC: 3 | RNVC: 2

27 Dec 2012

3040-01-482-5001
Housing Adapter

014825001
3219774-1: RNCC: 3 | RNVC: 2

26 Feb 2001

3040-01-613-9966
Shouldered Shaft

016139966
10020-100: RNCC: 3 | RNVC: 2

21 Nov 2012

3040-01-482-0454
Shouldered Shaft

014820454
42807C117: RNCC: 3 | RNVC: 2

7 Feb 2001

3040-01-481-9116
Straight Shaft

014819116
9-P-70: RNCC: 3 | RNVC: 2

31 Jan 2001

3040-01-481-6796
Mechanical Drive Housing

014816796
12446577: RNCC: 3 | RNVC: 2

19 Jan 2001

3040-01-612-7539
Shouldered Shaft

016127539
6057318-701: RNCC: 3 | RNVC: 1
6054466ITEMD12: RNCC: 5 | RNVC: 1

19 Oct 2012

3040-01-480-7241
Shaft Retaining Plate

014807241
923899.0243: RNCC: 3 | RNVC: 2
923899.0243: RNCC: 5 | RNVC: 2
9238990243: RNCC: 5 | RNVC: 9

4 Dec 2000

3040-01-480-7197
Nonaircraft Mechanical Actuator

014807197
424704: RNCC: 3 | RNVC: 2
0740431: RNCC: 5 | RNVC: 2

4 Dec 2000

3040-01-480-5363
Linear Actuating Cylinder Assembly

014805363
A354550100: RNCC: 3 | RNVC: 2
A35455.0100: RNCC: 5 | RNVC: 2

27 Nov 2000

3040-01-480-5361
Linear Actuating Cylinder Assembly

014805361
A354560100: RNCC: 3 | RNVC: 2
A35456.0100: RNCC: 5 | RNVC: 2

27 Nov 2000

3040-01-480-5350
Linear Actuating Cylinder Assembly

014805350
A358350100: RNCC: 3 | RNVC: 2
A35835.0100: RNCC: 5 | RNVC: 2

27 Nov 2000

3040-01-480-1832
Aircraft Pawl Assy

014801832
901-031-342-133: RNCC: 3 | RNVC: 2

9 Nov 2000

3040-01-479-8508
Body Hub

014798508
MP-0003844G: RNCC: 3 | RNVC: 2
A36292.0100: RNCC: 5 | RNVC: 2
A362920100: RNCC: 5 | RNVC: 9

31 Oct 2000

3040-01-479-8512
Manual Control Lever

014798512
923828.069: RNCC: 3 | RNVC: 2
923828.0690: RNCC: 5 | RNVC: 2
9238280690: RNCC: 5 | RNVC: 9

31 Oct 2000

3040-01-479-8381
Pneumatic Actuator Cylinder Housing

014798381
2-195-1-10016: RNCC: 3 | RNVC: 2

31 Oct 2000

3040-01-479-8331
Linear Actuating Cylinder Piston Rod

014798331
6-768-100085: RNCC: 3 | RNVC: 2

31 Oct 2000

3040-01-479-8254
Housing Adapter

014798254
A3194227-001: RNCC: 3 | RNVC: 2
A3194227: RNCC: D | RNVC: 9

31 Oct 2000

3040-01-479-5371
Linear Actuating Cylinder Assembly

014795371
791822-001: RNCC: 3 | RNVC: 2
791822: RNCC: D | RNVC: 9

24 Oct 2000

3040-01-479-3956
Shouldered Shaft

014793956
EP-0002204: RNCC: 3 | RNVC: 2
923828.0734: RNCC: 5 | RNVC: 2
9238280734: RNCC: 5 | RNVC: 9
230171.0100: RNCC: 5 | RNVC: 9

19 Oct 2000

3040-01-479-3902
Rigid Connecting Link

014793902
923828.0673: RNCC: 3 | RNVC: 2
923828.0673: RNCC: 5 | RNVC: 2
9238280673: RNCC: 5 | RNVC: 9

19 Oct 2000

3040-01-479-3897
Shaft Retaining Plate

014793897
923828.0697: RNCC: 3 | RNVC: 2
9238280697: RNCC: 5 | RNVC: 9

19 Oct 2000

3040-01-479-3886
Ball Joint

014793886
923828.0672: RNCC: 3 | RNVC: 2
923828.0672: RNCC: 5 | RNVC: 2
9238280672: RNCC: 5 | RNVC: 9

19 Oct 2000

3040-01-608-7164
Acft Shaft Assembly

016087164
65300-12165-104: RNCC: 3 | RNVC: 2
65300-12165-104: RNCC: 5 | RNVC: 2
65300-12165-104: RNCC: 5 | RNVC: 9

9 Jul 2012

3040-01-478-3566
Linear Actuating Cylinder Piston Rod

014783566
6768003661: RNCC: 3 | RNVC: 2

8 Sep 2000

3040-01-478-2042
Shaft And Tube Support Assembly

014782042
600016: RNCC: 3 | RNVC: 2

31 Aug 2000

3040-01-478-1226
Linear Actuating Cylinder

014781226
C623175: RNCC: 3 | RNVC: 2
C623175: RNCC: 5 | RNVC: 2
C623175: RNCC: 5 | RNVC: 9
C623175: RNCC: 5 | RNVC: 9

30 Aug 2000

3040-01-478-1152
Straight Shaft

014781152
135416: RNCC: 3 | RNVC: 2

30 Aug 2000

3040-01-606-3066
Pivot Shaft Assembly

016063066
016063066: RNCC: 3 | RNVC: 2
6020-400: RNCC: 5 | RNVC: 2
6020-400X: RNCC: 5 | RNVC: 2
6020-400X: RNCC: 5 | RNVC: 9
6020-400X: RNCC: 5 | RNVC: 9

16 May 2012

3040-01-477-8992
Shouldered Shaft

014778992
6810001998: RNCC: 3 | RNVC: 2

23 Aug 2000

3040-01-477-6802
Piston Ring

014776802
7755329609: RNCC: 3 | RNVC: 2
7755329609: RNCC: 5 | RNVC: 2
5115180750: RNCC: 5 | RNVC: 9

15 Aug 2000

3040-01-477-4365
Counterbalance Weight

014774365
147-0333: RNCC: 3 | RNVC: 2

9 Aug 2000

3040-01-604-7734
Shouldered Shaft

016047734
69-72992-2: RNCC: 3 | RNVC: 2

13 Apr 2012

3040-01-477-0808
Planetary Gears Carrier

014770808
394-8235: RNCC: 3 | RNVC: 2
153-3194: RNCC: 5 | RNVC: 9

31 Jul 2000

3040-01-604-1136
Shouldered Shaft Assembly

016041136
256A3913-1: RNCC: 3 | RNVC: 2

27 Mar 2012

3040-01-476-5025
Shouldered Shaft

014765025
1490661: RNCC: 3 | RNVC: 2

14 Jul 2000

3040-01-476-4979
Transmission Fluid Cooler

014764979
5928495: RNCC: 3 | RNVC: 2
1305230: RNCC: 5 | RNVC: 9

14 Jul 2000

3040-01-603-4578
Bell Crank

016034578
68A413007-2003: RNCC: 3 | RNVC: 2

2 Mar 2012

3040-01-476-0510
Linear Actuating Cylinder Assembly

014760510
9173704EX: RNCC: 3 | RNVC: 9
AT264204: RNCC: 5 | RNVC: 9
AT250455: RNCC: 5 | RNVC: 9

23 Jun 2000

3040-01-476-0262
Housing Adapter

014760262
C30742: RNCC: 3 | RNVC: 2
C30742: RNCC: 3 | RNVC: 9

22 Jun 2000

3040-01-476-0166
Aircraft Slip Ring

014760166
901-311-205-105: RNCC: 1 | RNVC: 2
AC6252-1: RNCC: 3 | RNVC: 2
AC6252: RNCC: 5 | RNVC: 9

22 Jun 2000

3040-01-475-6097
Shaft Assy Archimed

014756097
43326042: RNCC: 3 | RNVC: 9
43326042: RNCC: 5 | RNVC: 2
43326042: RNCC: 5 | RNVC: 9

8 Jun 2000

3040-01-474-9338
Straight Shaft

014749338
270060: RNCC: 3 | RNVC: 2

17 May 2000

3040-01-474-9334
Straight Shaft

014749334
262436-2.968: RNCC: 3 | RNVC: 2
26243611218: RNCC: 3 | RNVC: 2
270018: RNCC: 5 | RNVC: 9
260536-21: RNCC: 5 | RNVC: 9

17 May 2000

3040-01-474-9330
Straight Shaft

014749330
262436-5.468: RNCC: 3 | RNVC: 2
270019: RNCC: 5 | RNVC: 9

17 May 2000

3040-01-474-7591
Rigid Connecting Link

014747591
3104058: RNCC: 3 | RNVC: 2
AT213793: RNCC: 5 | RNVC: 9

11 May 2000

3040-01-474-7582
Body Hub

014747582
R81876: RNCC: 3 | RNVC: 9

11 May 2000

3040-01-474-5429
Mechanical Drive Housing

014745429
144-4623: RNCC: 3 | RNVC: 2

5 May 2000

3040-01-474-5433
Spur Gearshaft

014745433
151-7486: RNCC: 3 | RNVC: 2

5 May 2000

3040-01-474-5420
Shouldered Shaft

014745420
9R-2421: RNCC: 3 | RNVC: 2

5 May 2000

3040-01-474-5385
Straight Shaft Assembly

014745385
139-3268: RNCC: 3 | RNVC: 2

5 May 2000

3040-01-474-5370
Rotary Actuating Cylinder Assembly

014745370
12446292-1: RNCC: 3 | RNVC: 2
12446292: RNCC: D | RNVC: 9

5 May 2000

3040-01-474-4256
Shouldered Shaft

014744256
3055594: RNCC: 3 | RNVC: 2
AT202412: RNCC: 5 | RNVC: 9

3 May 2000

3040-01-474-2410
Multiple Gears Gearshaft

014742410
151-7504: RNCC: 3 | RNVC: 2

28 Apr 2000

3040-01-474-2395
Shaft Retaining Plate

014742395
1177249: RNCC: 3 | RNVC: 2

28 Apr 2000

3040-01-474-2098
Straight Shaft

014742098
115-4074: RNCC: 3 | RNVC: 2

27 Apr 2000

3040-01-474-2088
Shouldered Shaft

014742088
162-5394: RNCC: 3 | RNVC: 2

27 Apr 2000

3040-01-474-2090
Shouldered Shaft

014742090
162-5395: RNCC: 3 | RNVC: 2

27 Apr 2000

3040-01-474-2077
Shouldered Shaft

014742077
126-0288: RNCC: 3 | RNVC: 2

27 Apr 2000

3040-01-474-2083
Shouldered Shaft

014742083
1268901: RNCC: 3 | RNVC: 2

27 Apr 2000

3040-01-474-2082
Shouldered Shaft

014742082
131-0715: RNCC: 3 | RNVC: 2

27 Apr 2000

3040-01-474-2080
Shouldered Shaft

014742080
155-6657: RNCC: 3 | RNVC: 2

27 Apr 2000

3040-01-474-2079
Shouldered Shaft

014742079
146-7292: RNCC: 3 | RNVC: 2

27 Apr 2000

3040-01-474-2075
Shouldered Shaft

014742075
126-0287: RNCC: 3 | RNVC: 2

27 Apr 2000

3040-01-474-1897
Planetary Gears Carrier

014741897
176-9286: RNCC: 3 | RNVC: 2

27 Apr 2000

3040-01-474-1732
Planetary Gears Carrier

014741732
146-8506: RNCC: 3 | RNVC: 2

27 Apr 2000

3040-01-474-1720
Control Cam

014741720
1189587: RNCC: 3 | RNVC: 2

27 Apr 2000

3040-01-598-3147
Pawl

015983147
160260-76530: RNCC: 3 | RNVC: 2
160260-76530: RNCC: 3 | RNVC: 9

20 Jul 2011

3040-01-474-1455
Nonrotating Shaft Eye Bracket

014741455
212-6854: RNCC: 3 | RNVC: 2
161-4008: RNCC: 5 | RNVC: 9

26 Apr 2000

3040-01-473-8426
Shouldered Shaft

014738426
4337035: RNCC: 3 | RNVC: 2
AT213871: RNCC: 5 | RNVC: 9

18 Apr 2000

3040-01-473-8414
Shouldered Shaft

014738414
4338053: RNCC: 3 | RNVC: 9
AT213876: RNCC: 5 | RNVC: 9

18 Apr 2000

3040-01-473-8382
Ball Joint

014738382
4369640: RNCC: 3 | RNVC: 9
AT214140: RNCC: 5 | RNVC: 9

18 Apr 2000

3040-01-473-5461
Shouldered Shaft

014735461
9G7353: RNCC: 3 | RNVC: 2

11 Apr 2000

3040-01-473-5370
Shouldered Shaft

014735370
1119891: RNCC: 3 | RNVC: 2

11 Apr 2000

3040-01-473-5181
Remote Control Lever

014735181
9W6375: RNCC: 3 | RNVC: 2

11 Apr 2000

3040-01-473-5162
Remote Control Lever

014735162
9W6376: RNCC: 3 | RNVC: 2

11 Apr 2000

3040-01-596-8500
Linear Actuating Cylinder Head

015968500
3169297-2: RNCC: 3 | RNVC: 2
10424546: RNCC: 6 | RNVC: 9

25 May 2011

3040-01-473-4027
Straight Shaft

014734027
9P9650: RNCC: 3 | RNVC: 2

7 Apr 2000

3040-01-473-0960
Body Hub

014730960
4-195-1-10009: RNCC: 3 | RNVC: 2

27 Mar 2000

3040-01-472-6763
Shouldered Shaft

014726763
973181: RNCC: 3 | RNVC: 2

13 Mar 2000

3040-01-472-5592
Mater Aircraft Link

014725592
901-033-815-115: RNCC: 3 | RNVC: 2

8 Mar 2000

3040-01-595-4867
Carrier Housing

015954867
02C110MGR: RNCC: 3 | RNVC: 2

28 Apr 2011

3040-01-595-4858
Carrier Housing

015954858
01C110MEX: RNCC: 3 | RNVC: 2

28 Apr 2011

3040-01-472-1297
Adapter Assy

014721297
901-045-775-101: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-472-0289
Rigid Connecting Link

014720289
901-031-342-107: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-472-0248
Pawl Assy

014720248
901-031-342-123: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-471-9920
Rigid Connecting Link

014719920
901-031-635-107: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-471-9912
Rigid Connecting Link

014719912
901-031-635-103: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-471-9704
Rigid Connecting Link

014719704
901-001-158-109: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-471-5019
Straight Shaft

014715019
8Y-8306: RNCC: 3 | RNVC: 2

3 Feb 2000

3040-01-471-4243
Shaft Retaining Plate

014714243
0676900: RNCC: 3 | RNVC: 2

2 Feb 2000

3040-01-471-4047
Counterbalance Weight

014714047
7X-5305: RNCC: 3 | RNVC: 2

2 Feb 2000

3040-01-471-3647
Shouldered Shaft Assembly

014713647
1688214: RNCC: 3 | RNVC: 2

1 Feb 2000

3040-01-470-5814
Shaft Retaining Plate

014705814
1013208: RNCC: 3 | RNVC: 2

27 Dec 1999

3040-01-470-0332
Mechanical Drive Housing

014700332
M012102558: RNCC: 3 | RNVC: 2
M012225363: RNCC: 5 | RNVC: 9
M012225363: RNCC: 5 | RNVC: 9

6 Dec 1999

3040-01-469-0711
Nonaircraft Mechanical Actuator

014690711
A3254849: RNCC: 3 | RNVC: 2
A32548489: RNCC: 3 | RNVC: 9
A3254849: RNCC: 5 | RNVC: 2

2 Nov 1999

3040-01-468-9161
Linear Actuating Cylinder Assembly Parts Kit

014689161
1221161: RNCC: 3 | RNVC: 2

27 Oct 1999

3040-01-468-3097
Spur Gearshaft

014683097
117JG2: RNCC: 3 | RNVC: 2

5 Oct 1999

3040-01-468-3006
Brake Adapter

014683006
142J1: RNCC: 3 | RNVC: 2

5 Oct 1999

3040-01-468-1766
Body Hub

014681766
112782: RNCC: 3 | RNVC: 2

30 Sep 1999

3040-01-467-9571
Straight Shaft

014679571
SC-B-539721: RNCC: 3 | RNVC: 2

22 Sep 1999

3040-01-467-3072
Linear Actuating Cylinder Piston

014673072
33822: RNCC: 3 | RNVC: 2

24 Aug 1999

3040-01-466-6304
Push-Pull Control Assembly

014666304
301947-003-65FT: RNCC: 3 | RNVC: 9
3009-075-1981: RNCC: 5 | RNVC: 2
301947-003-65FT: RNCC: 5 | RNVC: 2
301947-003-780: RNCC: 5 | RNVC: 9
301947-003-65FT: RNCC: 5 | RNVC: 9
301947-003-780: RNCC: 5 | RNVC: 9

28 Jul 1999

3040-01-466-0786
Shouldered Shaft

014660786
114254-66210: RNCC: 3 | RNVC: 9
114254-66210: RNCC: 5 | RNVC: 2
114254-66210: RNCC: 5 | RNVC: 2
183250-66070: RNCC: 5 | RNVC: 9
183250-66070: RNCC: 5 | RNVC: 9
183250-66070: RNCC: 5 | RNVC: 9
114254-66210: RNCC: 5 | RNVC: 9
183250-66070: RNCC: 5 | RNVC: 9
183250-66070: RNCC: 5 | RNVC: 9
114254-66210: RNCC: 5 | RNVC: 9

6 Jul 1999

3040-01-583-4068
Manual Control Lever

015834068
704-48207-R1-00: RNCC: 3 | RNVC: 2
704-48207-R0-00: RNCC: 5 | RNVC: 9
704-48207-P0-00: RNCC: 5 | RNVC: 9
704-48207-P1-00: RNCC: 5 | RNVC: 9

24 Mar 2010

3040-01-464-3181
Roller Arm Shaft

014643181
335544: RNCC: 3 | RNVC: 2
335544: RNCC: 5 | RNVC: 9
335544: RNCC: 5 | RNVC: 9
335544: RNCC: 5 | RNVC: 9

24 Apr 1999

3040-01-463-9110
Flexible Drive Shaft

014639110
4646-72-06/03X1470-2.0: RNCC: 3 | RNVC: 2
47B MLB 243-010ITEM22: RNCC: 5 | RNVC: 2
4646-72-06/03X1525-2.0: RNCC: 5 | RNVC: 9

8 Apr 1999

3040-01-463-3705
Shouldered Shaft

014633705
13212911: RNCC: 3 | RNVC: 2

18 Mar 1999

3040-01-579-2306
Rigid Connecting Link

015792306
113A9205-5: RNCC: 3 | RNVC: 2

4 Nov 2009

3040-01-579-2286
Rigid Connecting Link

015792286
113A9105-5: RNCC: 3 | RNVC: 2

4 Nov 2009

3040-01-461-4150
Spline Adapter

014614150
21190: RNCC: 3 | RNVC: 2

11 Dec 1998

3040-01-461-2031
Linear Actuating Cylinder Head

014612031
6-372-005378: RNCC: 3 | RNVC: 2

3 Dec 1998

3040-01-461-1715
Linear Actuating Cylinder Piston Rod

014611715
6-768-003907: RNCC: 3 | RNVC: 2

2 Dec 1998

3040-01-461-1695
Linear Actuating Cylinder Piston

014611695
6-701-00105015: RNCC: 3 | RNVC: 9

2 Dec 1998

3040-01-461-1681
Linear Actuating Cylinder

014611681
6-372-005379: RNCC: 3 | RNVC: 2

2 Dec 1998

3040-01-461-1409
Linear Actuating Cylinder Assembly

014611409
6-372-005388: RNCC: 3 | RNVC: 2

1 Dec 1998

3040-01-461-1395
Linear Actuating Cylinder Assembly

014611395
6-372-005384: RNCC: 3 | RNVC: 2
6-372-005363: RNCC: 3 | RNVC: 9
6-372-005363: RNCC: 5 | RNVC: 9
6-372-005364: RNCC: 5 | RNVC: 9

1 Dec 1998

3040-01-461-1364
Linear Actuating Cylinder Piston Rod

014611364
6-768-003703: RNCC: 3 | RNVC: 2

1 Dec 1998

3040-01-461-1330
Linear Actuating Cylinder Assembly

014611330
6-372-005377: RNCC: 3 | RNVC: 2

1 Dec 1998

3040-01-461-1130
Linear Actuating Cylinder Assembly

014611130
6-372-005391: RNCC: 3 | RNVC: 2

30 Nov 1998

3040-01-461-0495
Linear Actuating Cylinder Head

014610495
6-372-005386: RNCC: 3 | RNVC: 2

25 Nov 1998

3040-01-461-0172
Linear Actuating Cylinder Piston Rod

014610172
6-768-003911: RNCC: 3 | RNVC: 2

24 Nov 1998

3040-01-460-9964
Pawl

014609964
8661693: RNCC: 3 | RNVC: 2
3040PL0740752: RNCC: 6 | RNVC: 9

24 Nov 1998

3040-01-572-4511
Hydraulic Control Assembly

015724511
2120812: RNCC: 3 | RNVC: 2

11 Mar 2009

3040-01-458-7062
Sndome Spider Assy

014587062
64082560: RNCC: 3 | RNVC: 2
6482560: RNCC: C | RNVC: 1

4 Sep 1998

3040-01-457-9213
Counterbalance Weight

014579213
D777-13-061 REV.C ITEM 81: RNCC: 3 | RNVC: 2
102-271-260-777: RNCC: C | RNVC: 1

7 Aug 1998

3040-01-457-7604
Shaft Collar

014577604
3303583-7: RNCC: 3 | RNVC: 2
3303583-7: RNCC: 5 | RNVC: 2
3303583-7: RNCC: 5 | RNVC: 2
3303583-7: RNCC: 5 | RNVC: 9
3303583-7: RNCC: C | RNVC: 1
3303583: RNCC: D | RNVC: 9

3 Aug 1998

3040-01-457-0525
Linear Actuating Cylinder

014570525
128-4119: RNCC: 3 | RNVC: 2
128-4119: RNCC: 5 | RNVC: 9

9 Jul 1998

3040-01-456-8952
Rigid Connecting Link

014568952
13316263: RNCC: 3 | RNVC: 2
13316263: RNCC: 3 | RNVC: 2

30 Jun 1998

3040-01-567-8780
Linear Actuating Cylinder

015678780
8226312: RNCC: 3 | RNVC: 2

9 Oct 2008

3040-01-567-6942
Shaft Collar

015676942
6435K16: RNCC: 3 | RNVC: 2
6435K16: RNCC: 5 | RNVC: 2

2 Oct 2008

3040-01-456-0771
Aft Spindle

014560771
693-10318-1: RNCC: 3 | RNVC: 2

29 May 1998

3040-01-455-4854
Linear Actuating Cylinder

014554854
C-B1641: RNCC: 3 | RNVC: 9

5 May 1998

3040-01-454-9631
Shaft Collar

014549631
7579741-011: RNCC: 3 | RNVC: 2
7579741-011: RNCC: 5 | RNVC: 2
7579741-011: RNCC: 5 | RNVC: 2

17 Apr 1998

3040-01-454-9073
Electrical-Fluid Pressure Connector Assembly

014549073
901-076-654-101: RNCC: 3 | RNVC: 2

16 Apr 1998

3040-01-454-9076
Electrical-Fluid Pressure Connector Assembly

014549076
901-076-666-103: RNCC: 3 | RNVC: 2

16 Apr 1998

3040-01-454-6059
Shouldered Shaft

014546059
7579767-011: RNCC: 3 | RNVC: 2
7579767-011: RNCC: 5 | RNVC: 2

7 Apr 1998

3040-01-454-4963
Wear Ring

014544963
8201-002-008: RNCC: 3 | RNVC: 2

2 Apr 1998

3040-01-564-1120
Linear Actuating Cylinder Assembly

015641120
6597387: RNCC: 3 | RNVC: 2

4 Jun 2008

3040-01-454-4477
Shouldered Shaft

014544477
7579752-001: RNCC: 3 | RNVC: 2
7579752-001: RNCC: 5 | RNVC: 2
7579752-001: RNCC: 5 | RNVC: 2

31 Mar 1998

3040-01-564-0124
Control Cam

015640124
2726629: RNCC: 3 | RNVC: 2

2 Jun 2008

3040-01-454-3838
Cylinder Support

014543838
13812: RNCC: 3 | RNVC: 2

28 Mar 1998

3040-01-453-4114
Worm Shaft

014534114
845-7016098-0A-104: RNCC: 3 | RNVC: 1

27 Feb 1998

3040-01-453-2858
Rigid Connecting Link

014532858
3036AS530: RNCC: 3 | RNVC: 2
3036AS530: RNCC: D | RNVC: 9
C014035-1: RNCC: E | RNVC: 8
C014035-1: RNCC: E | RNVC: 8
C014035: RNCC: E | RNVC: 8

25 Feb 1998

3040-01-561-4099
Brake Drum

015614099
875SB-CC: RNCC: 3 | RNVC: 2
20866004 FIND NO 10: RNCC: 5 | RNVC: 2
875 SB: RNCC: 5 | RNVC: 2
193867: RNCC: 5 | RNVC: 2
20866019: RNCC: 5 | RNVC: 2

5 Mar 2008

Load More Results