What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 147 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 147 of 300

3040-01-302-3521
Linear Actuating Cylinder Assembly Parts Kit

013023521
667976: RNCC: 3 | RNVC: 2
667976: RNCC: 5 | RNVC: 2

13 Jun 1989

3040-01-309-8145
Shouldered Shaft

013098145
42217D94: RNCC: 3 | RNVC: 2
694912-101: RNCC: 5 | RNVC: 2

24 Oct 1989

3040-01-314-4378
Straight Shaft

013144378
40271443: RNCC: 3 | RNVC: 2
4027063: RNCC: 5 | RNVC: 9

30 Jan 1990

3040-01-298-2940
Linear Actuating Cylinder Assembly

012982940
1H000185058: RNCC: 3 | RNVC: 2
GG123543E0: RNCC: 5 | RNVC: 9

14 Apr 1989

3040-01-303-2494
Shouldered Shaft

013032494
91741: RNCC: 3 | RNVC: 2
91741: RNCC: 5 | RNVC: 9
91741: RNCC: 5 | RNVC: 9
LE38/33: RNCC: 5 | RNVC: 9
91741: RNCC: 5 | RNVC: 9

27 Jun 1989

3040-01-305-5736
Mechanical Drive Housing

013055736
MIL50K-A300: RNCC: 3 | RNVC: 2
ML50K-300: RNCC: 5 | RNVC: 9

8 Aug 1989

3040-01-310-4288
Shouldered Shaft

013104288
1390026: RNCC: 3 | RNVC: 2

4 Nov 1989

3040-01-305-2279
Mechanical Drive Housing

013052279
151-924-300-777-001: RNCC: 3 | RNVC: 2
D777-51-061 ITEM 73: RNCC: 5 | RNVC: 2
D777-61-51-121A ITEM 69: RNCC: 5 | RNVC: 9
D777-51-061: RNCC: D | RNVC: 9

2 Aug 1989

3040-01-310-7954
Linear Actuating Cylinder

013107954
AG163150A0: RNCC: 3 | RNVC: 2

14 Nov 1989

3040-01-317-5366
Control Cam

013175366
3035-372: RNCC: 3 | RNVC: 2

31 Mar 1990

3040-01-303-4437
Rigid Connecting Link

013034437
628335: RNCC: 3 | RNVC: 2

30 Jun 1989

3040-01-297-3395
Push-Pull Control Assembly

012973395
64-032-1727: RNCC: 3 | RNVC: 2
64-032-1727: RNCC: 5 | RNVC: 9
5859842-1: RNCC: C | RNVC: 1

1 Apr 1989

3040-01-300-3395
Ball Joint Housing

013003395
2497784: RNCC: 3 | RNVC: 2

12 May 1989

3040-01-313-6169
Body Hub

013136169
94L-23-410: RNCC: 3 | RNVC: 2
94L-23-410: RNCC: 5 | RNVC: 2
94L-23-410: RNCC: 5 | RNVC: 9

12 Jan 1990

3040-01-291-5271
Shouldered Shaft

012915271
644-409: RNCC: 3 | RNVC: 2
644-409: RNCC: 5 | RNVC: 9
60-902 PIECE 409: RNCC: 5 | RNVC: 9
611-409: RNCC: 5 | RNVC: 9
60-902: RNCC: D | RNVC: 9

29 Dec 1988

3040-01-311-9552
Worm Shaft

013119552
DGR4350J PT 86A: RNCC: 3 | RNVC: 9
DGR4350J PT 86A: RNCC: 5 | RNVC: 2
PMG2600A-1: RNCC: 5 | RNVC: 2
DGR4350K 83A: RNCC: 5 | RNVC: 9
DGR4350J: RNCC: D | RNVC: 9

7 Dec 1989

3040-01-245-2756
Shouldered Shaft

012452756
139C6928-2: RNCC: 3 | RNVC: 2

26 Nov 1986

3040-01-263-0231
Rigid Connecting Link

012630231
414S2902-16: RNCC: 3 | RNVC: 2

9 Sep 1987

3040-01-279-0238
Shouldered Shaft

012790238
61-409-0136-2: RNCC: 3 | RNVC: 2
01-435-0366-4 PIECE 39: RNCC: 5 | RNVC: 2
01-435-0366-4: RNCC: D | RNVC: 9

12 May 1988

3040-01-233-7312
Shoe

012337312
B715-51-9: RNCC: 3 | RNVC: 2
B715-51-9VM: RNCC: 5 | RNVC: 1
BNMCMSH15: RNCC: C | RNVC: 1

1 Jun 1986

3040-01-244-9580
Linear Actuating Cylinder Assembly

012449580
K-31: RNCC: 3 | RNVC: 2
B-500400: RNCC: 5 | RNVC: 2
K-31: RNCC: 5 | RNVC: 2

21 Nov 1986

3040-01-256-3714
Flexible Shaft Assembly Core

012563714
57353-00 QTY 250 FT: RNCC: 3 | RNVC: 2
57353-250: RNCC: 5 | RNVC: 9

4 Jun 1987

3040-01-270-6469
Pulley Side Plate

012706469
4667049 PART 2: RNCC: 3 | RNVC: 2
4667049: RNCC: D | RNVC: 9

11 Jan 1988

3040-01-222-9720
Remote Control Lever

012229720
291AS462: RNCC: 3 | RNVC: 2

20 Dec 1985

3040-01-235-2727
Shouldered Shaft

012352727
52669081: RNCC: 3 | RNVC: 2

27 Jun 1986

3040-01-221-0116
Control Cam

012210116
BL-10488-3: RNCC: 3 | RNVC: 2

22 Nov 1985

3040-01-229-3321
Linear Actuating Cylinder Assembly

012293321
GG094613E0: RNCC: 3 | RNVC: 2

29 Mar 1986

3040-01-237-0213
Aircraft Boarding Ladder Shaft

012370213
949288-101: RNCC: 3 | RNVC: 2
949288: RNCC: D | RNVC: 9

24 Jul 1986

3040-01-245-9213
Rigid Connecting Link

012459213
06408-4: RNCC: 3 | RNVC: 2

6 Dec 1986

3040-01-251-8943
Bell Crank

012518943
65-10191-2: RNCC: 3 | RNVC: 2

25 Mar 1987

3040-01-225-3655
Brake Shoe

012253655
2B1-00194,ASSY: RNCC: 3 | RNVC: 2
192292: RNCC: 3 | RNVC: 9
2D3-00072,A01: RNCC: 5 | RNVC: 2
2D3-00072-A01: RNCC: 5 | RNVC: 9
2B1-194: RNCC: 5 | RNVC: 9
2B1-00194: RNCC: 5 | RNVC: 9

1 Feb 1986

3040-01-211-7175
Linear Actuating Cylinder Assembly

012117175
96-268931: RNCC: 3 | RNVC: 2
211037724: RNCC: 5 | RNVC: 2
171-66RIN-325-3000-0200-990: RNCC: 5 | RNVC: 9
96-268931: RNCC: 5 | RNVC: 9
77264292-1: RNCC: 5 | RNVC: 9
H66R1N-325-3000-200-990: RNCC: 5 | RNVC: 9

30 Jun 1985

3040-01-195-0265
Rigid Connecting Link

011950265
75D111144-2005: RNCC: 3 | RNVC: 2
75D111144-2005: RNCC: 5 | RNVC: 9
75D111144: RNCC: D | RNVC: 9

21 Nov 1984

3040-01-202-9073
Shouldered Shaft

012029073
3598-048: RNCC: 3 | RNVC: 2

7 Mar 1985

3040-01-195-9658
Control Cam

011959658
3035-306: RNCC: 3 | RNVC: 2
3035-306: RNCC: 5 | RNVC: 9

4 Dec 1984

3040-01-198-0877
Accumulator Cap

011980877
30001-1010: RNCC: 3 | RNVC: 2
30001-001 FIND 4: RNCC: 5 | RNVC: 9
30001-001: RNCC: D | RNVC: 9

4 Jan 1985

3040-01-200-3202
Mechanical Drive Housing

012003202
A-3226-L-714: RNCC: 3 | RNVC: 2
1111890C91: RNCC: 5 | RNVC: 9
A-3226-L-714: RNCC: 5 | RNVC: 9
3226-K-713: RNCC: D | RNVC: 9

1 Feb 1985

3040-01-216-0629
Counterbalance Weight

012160629
584944CL6: RNCC: 3 | RNVC: 2

6 Sep 1985

3040-01-192-2395
Linear Actuating Cylinder Assembly

011922395
6-372-002454: RNCC: 3 | RNVC: 2

18 Oct 1984

3040-01-216-1112
Cylinder Half Bumper

012161112
2080-34 ITEM 9: RNCC: 3 | RNVC: 2
522-4457280 ITEM 9: RNCC: 5 | RNVC: 2
4457280: RNCC: 5 | RNVC: 2
2080-34: RNCC: D | RNVC: 9
522-4457280: RNCC: D | RNVC: 9
522-4457280: RNCC: D | RNVC: 9

6 Sep 1985

3040-01-195-2641
Rigid Connecting Link

011952641
123AM41011-609: RNCC: 3 | RNVC: 2
123AM41011-609: RNCC: 5 | RNVC: 9

26 Nov 1984

3040-01-212-2465
Torq Conv Impeller

012122465
239643: RNCC: 3 | RNVC: 2
239643: RNCC: 5 | RNVC: 2
239643: RNCC: 5 | RNVC: 9

10 Jul 1985

3040-01-187-8229
Counterbalance Weight

011878229
301-296-216-0: RNCC: 3 | RNVC: 2
301-296-216-0: RNCC: 5 | RNVC: 2
301-296-212-0: RNCC: 5 | RNVC: 2
301-296-212-0: RNCC: 5 | RNVC: 2
301-296-216-0: RNCC: 5 | RNVC: 2
301-296-212-0: RNCC: 5 | RNVC: 9

25 Aug 1984

3040-01-207-9188
Shaft Collar

012079188
8635119: RNCC: 3 | RNVC: 2

7 May 1985

3040-01-188-3748
Control Cam

011883748
363B180-2: RNCC: 3 | RNVC: 2
363B180-2: RNCC: 5 | RNVC: 9
363B180-2: RNCC: 5 | RNVC: 9

2 Sep 1984

3040-01-198-3945
Shaft Assembly

011983945
361686-3: RNCC: 3 | RNVC: 2

9 Jan 1985

3040-01-215-1708
Spur Gearshaft

012151708
62492: RNCC: 3 | RNVC: 2

22 Aug 1985

3040-01-194-6852
Straight Shaft

011946852
363030-6: RNCC: 3 | RNVC: 2

16 Nov 1984

3040-01-196-9779
Shouldered Shaft

011969779
RG38727: RNCC: 3 | RNVC: 2

17 Dec 1984

3040-01-200-7097
Shouldered Shaft

012007097
3500959-2: RNCC: 3 | RNVC: 2

8 Feb 1985

3040-01-202-5425
Rigid Connecting Link

012025425
L5842105-001: RNCC: 3 | RNVC: 2

3 Mar 1985

3040-01-175-6485
Linear Actuating Cylinder Assembly

011756485
6-372-002117: RNCC: 3 | RNVC: 2

3 Apr 1984

3040-01-170-2484
Shaft Coupling Nut

011702484
532835-2: RNCC: 3 | RNVC: 2
532835: RNCC: D | RNVC: 9

22 Jan 1984

3040-01-173-4179
Straight Shaft

011734179
82A5027A1282: RNCC: 3 | RNVC: 2
82A5027A1267: RNCC: 5 | RNVC: 9
82A5027A1267: RNCC: 5 | RNVC: 9

5 Mar 1984

3040-01-182-3762
Control Cam

011823762
HM025-674-1: RNCC: 1 | RNVC: 2
014227-1: RNCC: 3 | RNVC: 2
014227-1: RNCC: 3 | RNVC: 9

23 Jun 1984

3040-01-176-1210
Spur Gearshaft

011761210
13211E8705: RNCC: 3 | RNVC: 2

7 Apr 1984

3040-01-173-7516
Remote Control Lever

011737516
7827370-01: RNCC: 3 | RNVC: 2

8 Mar 1984

3040-01-174-4189
Empty Case Eje Pawl

011744189
1276-06-352: RNCC: 3 | RNVC: 2

17 Mar 1984

3040-01-164-6559
Body Hub

011646559
395125-1: RNCC: 3 | RNVC: 2
395125: RNCC: D | RNVC: 9

19 Oct 1983

3040-01-150-4776
Manual Control Lever

011504776
55337: RNCC: 3 | RNVC: 2
55337: RNCC: 5 | RNVC: 2

5 Apr 1983

3040-01-151-5599
Spur Gearshaft

011515599
BL-10972: RNCC: 3 | RNVC: 2

19 Apr 1983

3040-01-150-5425
Manual Control Lever

011505425
1P929: RNCC: 3 | RNVC: 2

6 Apr 1983

3040-01-121-7373
Brake Disc

011217373
4620164: RNCC: 3 | RNVC: 2

7 Nov 1981

3040-01-137-1841
Shouldered Shaft

011371841
RY-173734 ITEM 3: RNCC: 3 | RNVC: 2
973886-01: RNCC: 3 | RNVC: 2
973886-01: RNCC: 5 | RNVC: 9
RY-173734 ITEM 3: RNCC: 5 | RNVC: 9
RY-173734: RNCC: D | RNVC: 9

22 Aug 1982

3040-01-121-7924
Linear Actuating Cylinder Assembly

011217924
R45815: RNCC: 3 | RNVC: 2
R34137: RNCC: 5 | RNVC: 9

8 Nov 1981

3040-01-163-7286
Hub Body Parts Kit

011637286
11967: RNCC: 3 | RNVC: 2
14075397: RNCC: 5 | RNVC: 2
14075397: RNCC: 5 | RNVC: 9
11967: RNCC: 5 | RNVC: 9

6 Oct 1983

3040-01-133-7852
Gearr Shaft

011337852
C20035D025: RNCC: 3 | RNVC: 2
E20035D001 ITEM 70: RNCC: 5 | RNVC: 2
3040PL0780010: RNCC: 6 | RNVC: 9

22 Jun 1982

3040-01-121-4914
Rigid Connecting Link

011214914
18-54423-1: RNCC: 3 | RNVC: 9
18-54423-1: RNCC: 5 | RNVC: 2
18-54423-1: RNCC: C | RNVC: 1

5 Nov 1981

3040-01-100-8337
Control Cam

011008337
70219-01030-104: RNCC: 3 | RNVC: 2
70219-01030-104: RNCC: 5 | RNVC: 2
70219-01030-104: RNCC: 5 | RNVC: 9

14 Sep 1980

3040-01-095-2428
Remote Control Lever

010952428
12267171: RNCC: 3 | RNVC: 2
12267171: RNCC: 3 | RNVC: 2
DAX12756: RNCC: 5 | RNVC: 9

26 May 1980

3040-01-083-1186
Bevel Gearshaft

010831186
12286243: RNCC: 1 | RNVC: 2
3-105-011-21: RNCC: 3 | RNVC: 2
3-105-011-21: RNCC: 3 | RNVC: 2

17 Sep 1979

3040-01-079-1635
Remote Control Lever

010791635
2-23-10558: RNCC: 3 | RNVC: 2
10168200246: RNCC: 5 | RNVC: 2

28 Jun 1979

3040-01-100-7694
Shouldered Shaft

011007694
12269453: RNCC: 3 | RNVC: 2

13 Sep 1980

3040-01-110-4310
Remote Control Lever

011104310
12296976: RNCC: 3 | RNVC: 2

31 Mar 1981

3040-01-052-8926
Control Cam

010528926
12266384: RNCC: 3 | RNVC: 2
12266384: RNCC: 5 | RNVC: 2
OTE-6384: RNCC: 5 | RNVC: 2
676989-3: RNCC: 5 | RNVC: 9
12266384: RNCC: 5 | RNVC: 9

22 Dec 1977

3040-01-063-1274
Bell Crank

010631274
209-001-505-5: RNCC: 3 | RNVC: 2

29 Jul 1978

3040-01-090-4836
Rigid Connecting Link

010904836
212-060-724-45: RNCC: 3 | RNVC: 2

18 Feb 1980

3040-01-062-3870
Shaft And Sleeve

010623870
KN100: RNCC: 3 | RNVC: 2
3602218-1: RNCC: 5 | RNVC: 2
3602218-1: RNCC: 5 | RNVC: 2

15 Jul 1978

3040-01-108-4962
Control Cam

011084962
11578897: RNCC: 3 | RNVC: 2

28 Feb 1981

3040-01-044-7770
Piston Cap

010447770
A02H4807-2: RNCC: 3 | RNVC: 2

20 Jul 1977

3040-00-960-0610
Mechanical Drive Housing

009600610
203386: RNCC: 3 | RNVC: 2
203386: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-01-029-9354
Plain Shoe

010299354
65-5691-1: RNCC: 3 | RNVC: 2
465740 PIECE 1: RNCC: 5 | RNVC: 2

26 Oct 1976

3040-01-020-8164
Rigid Connecting Link

010208164
90-2423-3008: RNCC: 3 | RNVC: 2
90-2423-3008: RNCC: 5 | RNVC: 9

22 Jan 2013

3040-01-021-8619
Rigid Drive Shaft

010218619
A15HS020-4: RNCC: 1 | RNVC: 2
DS-936020: RNCC: 3 | RNVC: 2
DS-936020: RNCC: 5 | RNVC: 2
7013: RNCC: 5 | RNVC: 9

21 May 1976

3040-01-046-4740
Stub Shaft

010464740
66075: RNCC: 3 | RNVC: 2
66075REVB: RNCC: 5 | RNVC: 2

18 Aug 1977

3040-01-019-7703
Straight Shaft

010197703
730-4401-15: RNCC: 3 | RNVC: 2

19 Apr 1976

3040-01-038-6997
Rigid Connecting Link

010386997
AM1474: RNCC: 3 | RNVC: 2

10 Apr 1977

3040-00-956-0550
Mechanical Drive Housing

009560550
NYLC46: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-01-003-7107
Governor Shaft

010037107
3500397-1: RNCC: 3 | RNVC: 2
3500397-1: RNCC: 5 | RNVC: 9

3 May 1975

3040-01-008-5331
Shouldered Shaft

010085331
119904-002: RNCC: 3 | RNVC: 2

25 Aug 1975

3040-01-014-1979
Control Cam

010141979
50-11375-3: RNCC: 3 | RNVC: 2
50-11375-3: RNCC: 5 | RNVC: 2

17 Dec 1975

3040-01-046-2454
Rigid Connecting Link

010462454
209-032-272-3: RNCC: 3 | RNVC: 2
209-032-272-003: RNCC: 5 | RNVC: 2

14 Aug 1977

3040-00-705-6002
Spur Gearshaft

007056002
156964: RNCC: 3 | RNVC: 2
156964: RNCC: 5 | RNVC: 9
156964: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-911-7303
Straight Shaft

009117303
59813: RNCC: 3 | RNVC: 2
7343215: RNCC: 5 | RNVC: 9
7343215: RNCC: 5 | RNVC: 9
7343215: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-798-3550
Brake Disc

007983550
7066031: RNCC: 3 | RNVC: 2
R451: RNCC: 5 | RNVC: 9
2010-130 PC62: RNCC: 5 | RNVC: 9
2010-130PC62: RNCC: C | RNVC: 1
R451: RNCC: C | RNVC: 1

1 Jan 1962

3040-00-802-4823
Door Mechanis Shaft

008024823
806597-1: RNCC: 3 | RNVC: 9
806597-1: RNCC: 5 | RNVC: 2
806597-1: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-877-3665
Remote Control Lever

008773665
6814486: RNCC: 3 | RNVC: 2
6814486: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-705-0347
Bell Crank

007050347
159447: RNCC: 3 | RNVC: 2
159447: RNCC: 5 | RNVC: 2
159447: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-723-1968
Control Cam

007231968
DS-932475: RNCC: 3 | RNVC: 2
DN40359: RNCC: 5 | RNVC: 2
932475: RNCC: 5 | RNVC: 2
DN40359: RNCC: 5 | RNVC: 9
3444: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-918-9139
Pawl

009189139
2121324: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-872-6335
Helical Gearshaft

008726335
71C-3A16: RNCC: 3 | RNVC: 2
71C-3A16: RNCC: 5 | RNVC: 2
71C3A16: RNCC: 5 | RNVC: 9
71C-3A16: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-908-4485
Control Cam

009084485
595976: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-808-4119
Straight Shaft

008084119
2122600: RNCC: 3 | RNVC: 2
2481314: RNCC: 3 | RNVC: 2
3040PL0891467: RNCC: 6 | RNVC: 9

1 Jan 1962

3040-00-918-7075
Center Gearshaft

009187075
1274: RNCC: 3 | RNVC: 2
1274: RNCC: 5 | RNVC: 9
1274: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-913-1592
Straight Shaft

009131592
204-072-403-001: RNCC: 3 | RNVC: 2
204-072-403-1: RNCC: 5 | RNVC: 9
204-072-403-1: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-943-2529
Linear Actuating Cylinder Piston

009432529
1-160-342-01: RNCC: 3 | RNVC: 9
1-160-342-01: RNCC: 5 | RNVC: 2
1-160-342-01: RNCC: 8 | RNVC: 2
1-160-342-01: RNCC: C | RNVC: 1

28 Jan 1966

3040-00-677-6257
Spur Gearshaft

006776257
460-25: RNCC: 3 | RNVC: 2
460-25: RNCC: 3 | RNVC: 9
460-25: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-757-0148
Pilot Shaft

007570148
5972: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-884-6594
Counterbalance Weight

008846594
1293094-5: RNCC: 3 | RNVC: 2
1293094-5: RNCC: 3 | RNVC: 9

1 Jan 1962

3040-00-907-7281
Pawl

009077281
458099: RNCC: 3 | RNVC: 2
458099: RNCC: 5 | RNVC: 2
458099: RNCC: 5 | RNVC: 2
458099: RNCC: 5 | RNVC: 2
458099: RNCC: C | RNVC: 1

1 Jan 1960

3040-00-909-7646
Worm Wheel Gearshaft

009097646
593322: RNCC: 3 | RNVC: 2
593322: RNCC: 5 | RNVC: 2
593322: RNCC: 5 | RNVC: 9
593322: RNCC: 5 | RNVC: 9
593322: RNCC: 5 | RNVC: 9
593322: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-798-6544
Flexible Shaft Assembly Core

007986544
24838-424: RNCC: 3 | RNVC: 2
R173P04-0424: RNCC: 5 | RNVC: 2
12952-424: RNCC: 5 | RNVC: 2
12953-424: RNCC: 5 | RNVC: 2
24838-0424: RNCC: 5 | RNVC: 2
12953-424: RNCC: 5 | RNVC: 9
R173P02-0424: RNCC: 5 | RNVC: 9
12952-424: RNCC: 5 | RNVC: 9
R173P020424: RNCC: 5 | RNVC: 9
24838-0424: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-480-5990
Rigid Connecting Link

004805990
212-060-724-5: RNCC: 3 | RNVC: 2
212-060-724: RNCC: D | RNVC: 9

2 Sep 1970

3040-00-625-8572
Rigid Connecting Link

006258572
374531-1: RNCC: 3 | RNVC: 2
374531-2: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-534-3032
Linear Actuating Cylinder Piston

005343032
2658912: RNCC: 3 | RNVC: 2

14 Sep 1974

3040-00-601-3505
Bell Crank

006013505
800164: RNCC: 3 | RNVC: 2
800164: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-483-4273
Control Cam

004834273
3014T96P01: RNCC: 3 | RNVC: 2

17 Mar 1972

3040-00-490-2612
Flexible Shaft Assembly

004902612
3XV30-35: RNCC: 3 | RNVC: 2
3XV30-35: RNCC: 5 | RNVC: 9

19 Sep 1969

3040-00-556-8633
Worm Shaft

005568633
5568633: RNCC: 3 | RNVC: 2
1015-556-8633: RNCC: 5 | RNVC: 9
1015005568633: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-594-8344
Shouldered Shaft

005948344
202093: RNCC: 3 | RNVC: 2
202093: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-605-0312
Shouldered Shaft

006050312
JYLC802: RNCC: 3 | RNVC: 2

25 Jan 1975

3040-00-592-9599
Rigid Connecting Link

005929599
5172654: RNCC: 3 | RNVC: 2
5172654: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-651-3862
Shouldered Shaft

006513862
519542: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-556-6450
Remote Control Lever

005566450
725706-1: RNCC: 3 | RNVC: 2
725706-1: RNCC: 5 | RNVC: 9

8 Nov 1974

3040-00-600-2406
Rigid Connecting Link

006002406
4012285-2: RNCC: 3 | RNVC: 9
4012285-2: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-591-6703
Shouldered Shaft

005916703
154397: RNCC: 3 | RNVC: 2
154397: RNCC: 5 | RNVC: 2
7349: RNCC: 5 | RNVC: 2
7349C001: RNCC: 5 | RNVC: 9
154397: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-594-7235
Shouldered Shaft

005947235
205428: RNCC: 3 | RNVC: 2
205428: RNCC: 5 | RNVC: 9
8629549: RNCC: D | RNVC: 9

1 Jan 1963

3040-00-347-6575
Control Cam

003476575
50-3751-3: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-370-1471
Manual Control Lever

003701471
N17T350015-329: RNCC: 3 | RNVC: 2
152411: RNCC: 5 | RNVC: 2
152411: RNCC: 5 | RNVC: 9
TP152411: RNCC: 5 | RNVC: 9
152411: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-417-2853
Rotating Shaft Eye Bracket

004172853
11660850: RNCC: 3 | RNVC: 2

18 Nov 1970

3040-00-469-6662
Shouldered Shaft

004696662
10555579: RNCC: 3 | RNVC: 2

28 Jan 1970

3040-00-297-5326
Hub Clamp

002975326
136C903G01: RNCC: 3 | RNVC: 2
136C903G01: RNCC: 3 | RNVC: 9

3 Oct 1973

3040-00-398-0512
Spur Gearshaft

003980512
779882-1: RNCC: 3 | RNVC: 2
779882-1: RNCC: 5 | RNVC: 2
779882-1: RNCC: 5 | RNVC: 9
779882-1: RNCC: 5 | RNVC: 9
B-779882: RNCC: D | RNVC: 9

1 Jan 1963

3040-00-370-0939
Manual Control Lever

003700939
150026: RNCC: 3 | RNVC: 9
150026: RNCC: 5 | RNVC: 2
150026: RNCC: 5 | RNVC: 9
150026: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-404-1718
Rigid Connecting Link

004041718
212-001-062-1: RNCC: 3 | RNVC: 2

30 Jul 1969

3040-00-327-0335
Rigid Connecting Link

003270335
3-56710-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-337-1359
Shouldered Shaft

003371359
50405-6ALTAR: RNCC: 3 | RNVC: 2
50405-6: RNCC: 5 | RNVC: 9
50405-6ALTAR: RNCC: 5 | RNVC: 9
50405PC6: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-406-7267
Flexible Shaft Assembly

004067267
212-070-493-1: RNCC: 1 | RNVC: 2
CB1620-5: RNCC: 3 | RNVC: 2
CB1620-5: RNCC: 3 | RNVC: 9
FYLD243-12: RNCC: 5 | RNVC: 2
CB1620-5: RNCC: 5 | RNVC: 9

17 Apr 1970

3040-00-449-8377
Rigid Connecting Link

004498377
5120069: RNCC: 3 | RNVC: 2
5120069: RNCC: 5 | RNVC: 9

16 Feb 1972

3040-00-126-6165
Differential Gear Unit

001266165
103871: RNCC: 3 | RNVC: 2

20 Nov 1968

3040-00-001-1698
Rigid Connecting Link

000011698
123W50901-1: RNCC: 3 | RNVC: 2
123W50901-1: RNCC: 5 | RNVC: 9
123W50901: RNCC: D | RNVC: 9

24 Sep 1972

3040-00-072-4535
Straight Shaft

000724535
HP437114: RNCC: 3 | RNVC: 2
HP437114: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-083-3617
Shouldered Shaft

000833617
550698: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-184-0307
Shouldered Shaft

001840307
MBEU1958GRU5: RNCC: 3 | RNVC: 2

10 Feb 1971

3040-00-038-1298
Link Cam Summing Adjusting Shaft

000381298
3384-038: RNCC: 3 | RNVC: 2

10 Nov 1972

3040-00-163-5973
Shaft Retaining Plate

001635973
65850-05142-103: RNCC: 3 | RNVC: 2

2 Feb 1973

3040-00-128-7466
Shouldered Shaft

001287466
206-001-033-3: RNCC: 3 | RNVC: 2

2 Dec 1968

3040-00-013-4197
Spur Gearshaft

000134197
BL4033: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-075-1969
Shouldered Shaft

000751969
BL-5534-1: RNCC: 3 | RNVC: 2
BL5534-1: RNCC: 5 | RNVC: 2

5 Aug 1967

3040-00-056-5511
Flexible Shaft Assembly

000565511
14395-501: RNCC: 3 | RNVC: 2
125C2668: RNCC: 5 | RNVC: 2
14395-501: RNCC: 5 | RNVC: 9

27 May 1967

3040-00-254-9961
Multiple Gears Gearshaft

002549961
104154: RNCC: 3 | RNVC: 2

23 Jul 1969

3040-01-004-0628
Spur Gearshaft

010040628
366874-2: RNCC: 3 | RNVC: 2
87090-01: RNCC: 5 | RNVC: 2
366874-2: RNCC: 5 | RNVC: 9
366874-2: RNCC: 5 | RNVC: 9

16 May 1975

3040-00-087-6462
Piston Ring

000876462
233-0023-99: RNCC: 3 | RNVC: 2
R15287: RNCC: 5 | RNVC: 9
12030: RNCC: 5 | RNVC: 9

6 May 1967

3040-00-604-0953
Bevel Gearshaft

006040953
4067D22: RNCC: 3 | RNVC: 2
4067D22: RNCC: 3 | RNVC: 9
4067D22: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-234-7215
Shouldered Shaft

002347215
3015455: RNCC: 3 | RNVC: 2

20 Jun 1969

3040-00-115-0628
Linear Actuating Cylinder Piston

001150628
11643726: RNCC: 3 | RNVC: 2
1025001150628: RNCC: 6 | RNVC: 9

13 Sep 1968

3040-01-694-9993
Linear Actuating Cylinder Assembly

016949993
256T3250-5: RNCC: 3 | RNVC: 1

8 May 2021

3040-01-694-2383
Shouldered Shaft

016942383
13026849: RNCC: 3 | RNVC: 2

23 Mar 2021

3040-01-694-1843
Mechanical Drive Housing

016941843
13026794: RNCC: 3 | RNVC: 2

22 Mar 2021

3040-01-693-0915
Linear Actuating Cylinder Piston Rod

016930915
8408023: RNCC: 3 | RNVC: 2
8408023: RNCC: 5 | RNVC: 2
03102995: RNCC: 5 | RNVC: 9

26 Jan 2021

3040-01-692-0788
Spur Gearshaft

016920788
DMT-0239: RNCC: 3 | RNVC: 2
DWG00239: RNCC: 7 | RNVC: 2

18 Nov 2020

3040-01-686-3927
Straight Shaft

016863927
8605451-6: RNCC: 3 | RNVC: 2
8605451: RNCC: D | RNVC: 9

12 Feb 2020

3040-01-686-0490
Counterbalance Weight

016860490
206-011-157-109: RNCC: 3 | RNVC: 2

28 Jan 2020

3040-01-683-2305
Control Cable Assembly

016832305
8600018-003: RNCC: 1 | RNVC: 2
315ECX-MTT-4-252: RNCC: 3 | RNVC: 2
8600018: RNCC: D | RNVC: 9

13 Sep 2019

3040-01-678-8717
Shaft Collar

016788717
4303000: RNCC: 3 | RNVC: 2
12604919: RNCC: 5 | RNVC: 2

1 Mar 2019

3040-01-677-3142
Rigid Connecting Link

016773142
4203027: RNCC: 3 | RNVC: 2
12606857: RNCC: 5 | RNVC: 2

7 Dec 2018

3040-01-676-0155
Shaft Retaining Plate

016760155
12601938: RNCC: 3 | RNVC: 2
12601938: RNCC: 3 | RNVC: 2

5 Oct 2018

3040-01-675-0293
Electrical-Fluid Pressure Connector Assembly

016750293
12570942: RNCC: 1 | RNVC: 2
ED7015-1: RNCC: 3 | RNVC: 2

20 Aug 2018

3040-01-674-5343
Manual Control Lever

016745343
12665350: RNCC: 3 | RNVC: 2
4391161: RNCC: 7 | RNVC: 2

31 Jul 2018

3040-01-673-7981
Shaft Idler

016737981
5303409: RNCC: 3 | RNVC: 2

27 Jun 2018

3040-01-672-1806
Shaft Idler

016721806
GS-5251-1: RNCC: 3 | RNVC: 2
4350835: RNCC: 7 | RNVC: 2

24 Apr 2018

3040-01-671-9016
Ball Joint

016719016
11-0806: RNCC: 3 | RNVC: 2

14 Apr 2018

3040-01-671-9014
Ball Joint

016719014
11-0805: RNCC: 3 | RNVC: 2

14 Apr 2018

3040-01-670-6227
Ball Joint

016706227
02652: RNCC: 3 | RNVC: 2
6072K111: RNCC: 5 | RNVC: 2

28 Feb 2018

3040-01-670-0666
Remote Control Lever

016700666
5217-1: RNCC: 3 | RNVC: 2

5 Feb 2018

3040-01-667-4319
Straight Shaft Assembly

016674319
12608900: RNCC: 3 | RNVC: 2
12608900: RNCC: 3 | RNVC: 2

17 Oct 2017

3040-01-667-2481
Rigid Connecting Link

016672481
4C63174-601A: RNCC: 3 | RNVC: 2

10 Oct 2017

3040-01-666-9343
Nonaircraft Mechanical Actuator

016669343
6631588-1: RNCC: 3 | RNVC: 2

27 Sep 2017

3040-01-666-7266
Shouldered Shaft

016667266
70351-38131-102: RNCC: 3 | RNVC: 2
70351-38131: RNCC: D | RNVC: 9

19 Sep 2017

3040-01-666-6471
Nonaircraft Mechanical Actuator

016666471
6631588-2: RNCC: 3 | RNVC: 2

14 Sep 2017

3040-01-665-8014
Hydraulic Control Assembly

016658014
3890AS000301-01: RNCC: 3 | RNVC: 2
3890AS000301-01: RNCC: 3 | RNVC: 2
3890AS000301-01: RNCC: 5 | RNVC: 2

14 Aug 2017

3040-01-665-4895
Mechanical Drive Housing Part

016654895
4974022-1: RNCC: 3 | RNVC: 2
4977151-1: RNCC: C | RNVC: 1
4977151: RNCC: D | RNVC: 9

1 Aug 2017

3040-01-665-3100
Mechanical Drive Housing

016653100
YZ123023: RNCC: 3 | RNVC: 9
YZ123023: RNCC: 5 | RNVC: 2

25 Jul 2017

3040-01-663-9523
Rigid Connecting Link

016639523
6181290: RNCC: 3 | RNVC: 2

31 May 2017

3040-01-663-2337
Control Cam

016632337
17A4526P25: RNCC: 3 | RNVC: 2

2 May 2017

3040-01-663-2077
Counterbalance Weight

016632077
6170383: RNCC: 3 | RNVC: 2

1 May 2017

3040-01-663-1552
Housing Adapter

016631552
5187027: RNCC: 3 | RNVC: 2

27 Apr 2017

3040-01-662-7815
Rigid Connecting Link

016627815
4980859-1: RNCC: 3 | RNVC: 2
4980859: RNCC: D | RNVC: 9

19 Apr 2017

3040-01-662-3902
Shaft Idler

016623902
4980879-1: RNCC: 3 | RNVC: 2

5 Apr 2017

3040-01-661-4308
Mechanical Drive Housing

016614308
4973975-1: RNCC: 3 | RNVC: 2

2 Mar 2017

3040-01-661-4302
Mechanical Drive Housing

016614302
4974094-2: RNCC: 3 | RNVC: 2

2 Mar 2017

3040-01-661-0421
Mechanical Drive Housing Part

016610421
3169967-1: RNCC: 3 | RNVC: 2

14 Feb 2017

3040-01-660-1783
Shouldered Shaft

016601783
67F-45501-30-00: RNCC: 3 | RNVC: 2

10 Jan 2017

3040-01-660-0328
Linear Actuating Cylinder Assembly

016600328
EP-0002715: RNCC: 3 | RNVC: 2

3 Jan 2017

3040-01-659-9988
Linear Actuating Cylinder Assembly

016599988
EP-0002719: RNCC: 3 | RNVC: 2

29 Dec 2016

3040-01-659-9987
Linear Actuating Cylinder Assembly

016599987
EP-0002716: RNCC: 3 | RNVC: 2

29 Dec 2016

3040-01-659-9847
Linear Actuating Cylinder Assembly

016599847
EP-0002714: RNCC: 3 | RNVC: 2

28 Dec 2016

3040-01-659-7128
Mechanical Drive Housing Part

016597128
4656.306.180: RNCC: 3 | RNVC: 2

12 Dec 2016

3040-01-659-6091
Rigid Connecting Link

016596091
4246301: RNCC: 3 | RNVC: 2

6 Dec 2016

3040-01-659-6077
Hub Clamp

016596077
012-5181-000: RNCC: 3 | RNVC: 2

6 Dec 2016

3040-01-657-7826
Rigid Connecting Link

016577826
EP-0023748: RNCC: 3 | RNVC: 2

30 Aug 2016

3040-01-657-3763
Straight Shaft

016573763
2546-234-00: RNCC: 3 | RNVC: 2

10 Aug 2016

3040-01-657-2010
Helical-Spur Gearshaft

016572010
72.1640.2: RNCC: 3 | RNVC: 9
72.1640.2: RNCC: 5 | RNVC: 2

3 Aug 2016

3040-01-656-9486
Rigid Connecting Link

016569486
2546-056-01: RNCC: 3 | RNVC: 2
2534-070-000: RNCC: 5 | RNVC: 9

25 Jul 2016

3040-01-656-9140
Linear Actuating Cylinder

016569140
EP-0020271: RNCC: 3 | RNVC: 2

22 Jul 2016

3040-01-656-9129
Linear Actuating Cylinder

016569129
EP-0020273: RNCC: 3 | RNVC: 2

22 Jul 2016

3040-01-656-8850
Rigid Connecting Link

016568850
81007681: RNCC: 3 | RNVC: 2

21 Jul 2016

3040-01-656-3250
Manual Control Lever Assembly

016563250
201428755-10: RNCC: 3 | RNVC: 2
201428755-10: RNCC: 5 | RNVC: 2
201428755-10: RNCC: 5 | RNVC: 2

27 Jun 2016

3040-01-656-2923
Straight Shaft Assembly

016562923
2546-004-01: RNCC: 3 | RNVC: 2
1533-018-00A: RNCC: 5 | RNVC: 9
1533-018: RNCC: 5 | RNVC: 9

24 Jun 2016

3040-01-655-9374
Piston Ring

016559374
509275-4281: RNCC: 3 | RNVC: 2
509275-4281: RNCC: 3 | RNVC: 2

11 Jun 2016

3040-01-655-7757
Linear Actuating Cylinder

016557757
5234-232: RNCC: 3 | RNVC: 2

7 Jun 2016

3040-01-655-3510
Straight Shaft

016553510
2546-004-00: RNCC: 3 | RNVC: 2
2546-004-000: RNCC: 5 | RNVC: 2

25 May 2016

3040-01-655-3502
Shouldered Shaft

016553502
2546-050-01: RNCC: 3 | RNVC: 2
2534-016-000: RNCC: 5 | RNVC: 9
2534-016-00: RNCC: 5 | RNVC: 9

25 May 2016

3040-01-655-3144
Straight Shaft

016553144
2546-049-01: RNCC: 3 | RNVC: 2
2534-015-00: RNCC: 5 | RNVC: 9

24 May 2016

3040-01-654-9800
Shaft Idler

016549800
2546-005-01: RNCC: 3 | RNVC: 2
1533-019: RNCC: 5 | RNVC: 9
1533-019-000: RNCC: 5 | RNVC: 9

16 May 2016

3040-01-654-5289
Linear Actuating Cylinder

016545289
EP-0020301: RNCC: 3 | RNVC: 2

2 May 2016

3040-01-654-3603
Control Cam

016543603
4609781: RNCC: 3 | RNVC: 2
19M7997: RNCC: 3 | RNVC: 2

26 Apr 2016

3040-01-654-1905
Bell Crank

016541905
2546-055-01: RNCC: 3 | RNVC: 2
2534-035-00: RNCC: 5 | RNVC: 9
2534-035-00A: RNCC: 5 | RNVC: 9

20 Apr 2016

3040-01-654-0624
Straight Shaft Assembly

016540624
3392AS2673: RNCC: 3 | RNVC: 2

15 Apr 2016

3040-01-653-3351
Pneumatic Actuator Cylinder Housing

016533351
EP-0020248: RNCC: 3 | RNVC: 2

21 Mar 2016

3040-01-653-2509
Mechanical Drive Housing

016532509
EP-0020245: RNCC: 3 | RNVC: 2

16 Mar 2016

3040-01-653-2518
Mechanical Drive Housing

016532518
EP-0020247: RNCC: 3 | RNVC: 2

16 Mar 2016

3040-01-653-2331
Linear Actuating Cylinder Piston

016532331
EP-0021822: RNCC: 3 | RNVC: 2

15 Mar 2016

3040-01-653-2329
Linear Actuating Cylinder Cap

016532329
EP-0020249: RNCC: 3 | RNVC: 2

15 Mar 2016

3040-01-653-2167
Pneumatic Actuator Cylinder Housing

016532167
EP-0021818: RNCC: 3 | RNVC: 2

15 Mar 2016

3040-01-653-2166
Pneumatic Actuator Cylinder Housing

016532166
EP-0021951: RNCC: 3 | RNVC: 2

15 Mar 2016

3040-01-653-2165
Pneumatic Actuator Cylinder Housing

016532165
EP-0019823: RNCC: 3 | RNVC: 2

15 Mar 2016

3040-01-653-1729
Linear Actuating Cylinder Piston Rod

016531729
EP-0020244: RNCC: 3 | RNVC: 2

14 Mar 2016

3040-01-652-9925
Linear Actuating Cylinder Piston Rod

016529925
EP-0020275: RNCC: 3 | RNVC: 2

10 Mar 2016

3040-01-652-8494
Linear Actuating Cylinder Assembly

016528494
333/E3558: RNCC: 3 | RNVC: 2

7 Mar 2016

3040-01-650-3099
Linear Actuating Cylinder Assembly

016503099
333/E3555: RNCC: 3 | RNVC: 2

27 Nov 2015

3040-01-650-3090
Linear Actuating Cylinder Assembly

016503090
333/E3564: RNCC: 3 | RNVC: 2

27 Nov 2015

3040-01-650-3098
Linear Actuating Cylinder Assembly

016503098
333/E3557: RNCC: 3 | RNVC: 2

27 Nov 2015

3040-01-650-2906
Linear Actuating Cylinder Assembly

016502906
333/E3514: RNCC: 3 | RNVC: 2
333/E3514: RNCC: 5 | RNVC: 2

25 Nov 2015

3040-01-649-3457
Straight Axle

016493457
RG-07-817: RNCC: 3 | RNVC: 2

27 Oct 2015

3040-01-648-4927
Flexible Shafting

016484927
84641058: RNCC: 3 | RNVC: 2

26 Sep 2015

3040-01-647-4748
Shaft Collar

016474748
914884: RNCC: 3 | RNVC: 2

22 Aug 2015

3040-01-647-4749
Shaft Collar

016474749
914883: RNCC: 3 | RNVC: 2

22 Aug 2015

3040-01-647-4750
Shaft Collar

016474750
914885: RNCC: 3 | RNVC: 2

22 Aug 2015

3040-01-647-4733
Shaft Collar

016474733
914887: RNCC: 3 | RNVC: 2

22 Aug 2015

3040-01-647-4730
Hub Clamp

016474730
3909AS1950-1: RNCC: 3 | RNVC: 2
3909AS1950: RNCC: D | RNVC: 9

22 Aug 2015

3040-01-647-4430
Shouldered Shaft

016474430
4056995C91: RNCC: 1 | RNVC: 2
070416-041: RNCC: 3 | RNVC: 2

21 Aug 2015

3040-01-647-4323
Mechanical Drive Housing

016474323
3905608C1: RNCC: 1 | RNVC: 2
69081-097: RNCC: 3 | RNVC: 2

21 Aug 2015

3040-01-647-3252
Mechanical Drive Housing Part

016473252
7-4625-3: RNCC: 3 | RNVC: 2

18 Aug 2015

3040-01-647-1768
Control Pedal

016471768
32521-1: RNCC: 3 | RNVC: 2

14 Aug 2015

3040-01-646-8621
Expander Tube Brake

016468621
010-0100-010: RNCC: 3 | RNVC: 2

3 Aug 2015

3040-01-646-8634
Expander Tube Brake

016468634
010-0100-011: RNCC: 3 | RNVC: 2

3 Aug 2015

3040-01-646-8626
Expander Tube Brake

016468626
010-0100-013: RNCC: 3 | RNVC: 2

3 Aug 2015

3040-01-646-8609
Expander Tube Brake

016468609
010-0100-012: RNCC: 3 | RNVC: 2

3 Aug 2015

3040-01-646-8597
Expander Tube Brake

016468597
010-0100-009: RNCC: 3 | RNVC: 2

3 Aug 2015

3040-01-645-4477
Rigid Connecting Link

016454477
13055795: RNCC: 3 | RNVC: 2

16 Jun 2015

3040-01-645-3804
Mechanically Actuated Spindle

016453804
31.05.03.012H: RNCC: 3 | RNVC: 2
31.05.03.012H: RNCC: 3 | RNVC: 9

13 Jun 2015

3040-01-643-7103
Rigid Connecting Link

016437103
12578252: RNCC: 3 | RNVC: 2

10 Apr 2015

3040-01-643-4916
Nonaircraft Mechanical Actuator

016434916
112515: RNCC: 3 | RNVC: 2

3 Apr 2015

3040-01-643-2176
Manual Control Lever

016432176
266-7632: RNCC: 3 | RNVC: 2

24 Mar 2015

3040-01-642-0326
Linear Actuating Cylinder Assembly

016420326
10666786-001: RNCC: 3 | RNVC: 2
10666786: RNCC: D | RNVC: 9

10 Feb 2015

3040-01-641-7425
Rigid Connecting Link

016417425
167-8278268 ITEM 24: RNCC: 3 | RNVC: 2
167-8278268: RNCC: D | RNVC: 9

30 Jan 2015

3040-01-641-5711
Extension Shaft

016415711
A3297191: RNCC: 3 | RNVC: 2

26 Jan 2015

3040-01-641-5672
Shaft Collar

016415672
A3297192: RNCC: 3 | RNVC: 2

26 Jan 2015

3040-01-641-3799
Nonaircraft Mechanical Actuator

016413799
4992596: RNCC: 3 | RNVC: 2

20 Jan 2015

3040-01-641-2469
Straight Shaft

016412469
5253887: RNCC: 3 | RNVC: 2

14 Jan 2015

3040-01-641-0328
Rigid Connecting Link

016410328
167-8278271 ITEM 18: RNCC: 3 | RNVC: 2

7 Jan 2015

3040-01-641-0001
Ball Joint

016410001
H10377: RNCC: 3 | RNVC: 2

6 Jan 2015

3040-01-640-9896
Rigid Connecting Link

016409896
167-8278271 ITEM 19: RNCC: 3 | RNVC: 2

6 Jan 2015

3040-01-640-9003
Mechanically Actuated Spindle

016409003
167-8278278 ITEM 1: RNCC: 3 | RNVC: 2
167-8396978 ITEM 17: RNCC: 5 | RNVC: 2

31 Dec 2014

3040-01-640-8405
Straight Shaft

016408405
300034-3-2: RNCC: 3 | RNVC: 2
301309 ITEM NO. 4 P/N 300034-3-2: RNCC: C | RNVC: 1

29 Dec 2014

3040-01-633-8463
Rigid Connecting Link

016338463
167-8278269 PC 21: RNCC: 3 | RNVC: 2
167-8278267 PC 10: RNCC: 3 | RNVC: 2
167-8278268 ITEM 21: RNCC: 5 | RNVC: 2
167-8278268: RNCC: D | RNVC: 9

5 Dec 2014

3040-01-633-8315
Shouldered Shaft

016338315
23066618-6: RNCC: 3 | RNVC: 2

5 Dec 2014

3040-01-633-6345
Nonaircraft Mechanical Actuator

016336345
RE535331: RNCC: 3 | RNVC: 2

26 Nov 2014

3040-01-632-2540
Mechanical Drive Housing Part

016322540
5008719: RNCC: 3 | RNVC: 2

14 Oct 2014

3040-01-632-2393
Mechanical Drive Housing Part

016322393
5008718: RNCC: 3 | RNVC: 2

14 Oct 2014

3040-01-631-8742
Rigid Connecting Link

016318742
FF520250500: RNCC: 3 | RNVC: 9
EMWW520250500: RNCC: 5 | RNVC: 2
20545: RNCC: 5 | RNVC: 9

29 Sep 2014

3040-01-629-8427
Nonrotating Shaft Eye Bracket

016298427
235 608: RNCC: 3 | RNVC: 2
235 608: RNCC: 3 | RNVC: 9

16 Jul 2014

3040-01-629-4612
Manual Control Lever Assembly

016294612
91705: RNCC: 3 | RNVC: 2

1 Jul 2014

3040-01-629-0241
Rigid Connecting Link

016290241
70400-22268-042: RNCC: 1 | RNVC: 2
2029-042: RNCC: 3 | RNVC: 2

17 Jun 2014

3040-01-628-0061
Mechanical Drive Housing Part

016280061
6CE-45301-00-8D: RNCC: 3 | RNVC: 2

6 May 2014

3040-01-627-7550
Detent Plate

016277550
61300: RNCC: 3 | RNVC: 2
3883381: RNCC: 5 | RNVC: 9
3883381: RNCC: 7 | RNVC: 2

25 Apr 2014

3040-01-627-5535
Mechanical Drive Housing

016275535
332/E6374: RNCC: 3 | RNVC: 2

17 Apr 2014

3040-01-627-1091
Manual Control Lever

016271091
230-00047CA-P1: RNCC: 3 | RNVC: 2

2 Apr 2014

3040-01-627-0628
Housing Adapter

016270628
030-00393-06: RNCC: 3 | RNVC: 2
230-00047-APC: RNCC: D | RNVC: 9

1 Apr 2014

3040-01-627-0421
Bell Crank

016270421
230-00047CB-C: RNCC: 3 | RNVC: 2

31 Mar 2014

3040-01-626-6356
Mechanical Drive Housing

016266356
146022: RNCC: 3 | RNVC: 2

18 Mar 2014

3040-01-626-6357
Mechanical Drive Housing

016266357
137972: RNCC: 3 | RNVC: 2

18 Mar 2014

3040-01-626-6351
Rigid Connecting Link

016266351
045161: RNCC: 3 | RNVC: 2

18 Mar 2014

3040-01-626-2995
Control Cable Assembly

016262995
059-00300: RNCC: 3 | RNVC: 2

5 Mar 2014

3040-01-626-2499
Shouldered Shaft

016262499
4060100: RNCC: 3 | RNVC: 2

4 Mar 2014

3040-01-625-9690
Rigid Connecting Link

016259690
230-00047CW: RNCC: 3 | RNVC: 2

21 Feb 2014

3040-01-625-9677
Rigid Connecting Link

016259677
230-00047CX: RNCC: 3 | RNVC: 2

21 Feb 2014

3040-01-625-4133
Straight Shaft

016254133
4019728: RNCC: 3 | RNVC: 2
4019728: RNCC: 5 | RNVC: 9

4 Feb 2014

3040-01-625-1892
Worm Shaft

016251892
901-220-964-121: RNCC: 3 | RNVC: 2

28 Jan 2014

3040-01-624-9743
Housing Adapter

016249743
030-00393-08: RNCC: 3 | RNVC: 2

21 Jan 2014

3040-01-624-9503
Nonrotating Shaft Eye Bracket

016249503
012155: RNCC: 3 | RNVC: 2
012155: RNCC: 5 | RNVC: 2

21 Jan 2014

3040-01-624-9472
Straight Shaft

016249472
012474: RNCC: 3 | RNVC: 2
012474: RNCC: 5 | RNVC: 2

21 Jan 2014

3040-01-624-6692
Seal Damper

016246692
6CE-45375-00-00: RNCC: 3 | RNVC: 2

10 Jan 2014

3040-01-624-5142
Slide Shift

016245142
6CB-45634-00-00: RNCC: 3 | RNVC: 2

6 Jan 2014

3040-01-624-5128
Mechanical Housing Cap

016245128
6CE-45361-10-00: RNCC: 3 | RNVC: 2

6 Jan 2014

3040-01-623-9646
Hub Clamp

016239646
8405102: RNCC: 3 | RNVC: 2

10 Dec 2013

3040-01-623-8829
Shaft Collar

016238829
2N004: RNCC: 3 | RNVC: 2
60485K610: RNCC: 5 | RNVC: 2

6 Dec 2013

3040-01-623-4017
Extension Shaft

016234017
347/00718: RNCC: 3 | RNVC: 2

13 Nov 2013

3040-01-622-9643
Spline Adapter

016229643
4682268: RNCC: 3 | RNVC: 9
4682268: RNCC: 5 | RNVC: 2

28 Oct 2013

3040-01-622-9634
Manual Control Lever

016229634
8119897: RNCC: 3 | RNVC: 9
8119897: RNCC: 5 | RNVC: 2

28 Oct 2013

3040-01-622-9242
Hub Clamp

016229242
4702172: RNCC: 3 | RNVC: 2
4702172: RNCC: 5 | RNVC: 2

25 Oct 2013

3040-01-622-1661
Rigid Connecting Link

016221661
FXB00000986: RNCC: 3 | RNVC: 9
FXB00000986: RNCC: 5 | RNVC: 2

30 Sep 2013

3040-01-621-5984
Straight Shaft

016215984
13225E8238: RNCC: 3 | RNVC: 2
11002C0400: RNCC: D | RNVC: 9

12 Sep 2013

3040-01-621-4364
Mechanical Drive Housing

016214364
10650999: RNCC: 3 | RNVC: 2

9 Sep 2013

3040-01-621-2662
Shaft Collar

016212662
8A106: RNCC: 3 | RNVC: 2
SP-22-A: RNCC: 5 | RNVC: 2
6436K146: RNCC: 5 | RNVC: 2
11027A0746: RNCC: 5 | RNVC: 9
11027C0701: RNCC: 7 | RNVC: 2

29 Aug 2013

3040-01-619-8486
Body Hub

016198486
008-402-81: RNCC: 3 | RNVC: 9

20 Jun 2013

3040-01-619-0635
Rigid Connecting Link

016190635
11582691: RNCC: 3 | RNVC: 2
SW 5340-016190635 SK: RNCC: 5 | RNVC: 2

15 May 2013

3040-01-618-7485
Hub Clamp

016187485
HP287: RNCC: 3 | RNVC: 2

3 May 2013

3040-01-618-5431
Rotary Actuating Cylinder Assembly

016185431
226122: RNCC: 3 | RNVC: 2
226122-D: RNCC: D | RNVC: 9

26 Apr 2013

3040-01-618-4502
Shouldered Shaft

016184502
508-34-001: RNCC: 3 | RNVC: 2

24 Apr 2013

3040-01-618-2887
Shouldered Shaft

016182887
2014616: RNCC: 3 | RNVC: 2
2014600: RNCC: D | RNVC: 9

18 Apr 2013

3040-01-618-0090
Shaft Retaining Plate

016180090
BH274-03D: RNCC: 3 | RNVC: 2

10 Apr 2013

3040-01-618-0057
Shaft Retaining Plate

016180057
BH274-02D: RNCC: 3 | RNVC: 2

10 Apr 2013

3040-01-617-8676
Linear Actuating Cylinder Piston

016178676
050FE0061: RNCC: 3 | RNVC: 9

5 Apr 2013

3040-01-616-8225
Multiple Gears Gearshaft

016168225
5717162: RNCC: 3 | RNVC: 2
54805: RNCC: 5 | RNVC: 2

28 Feb 2013

3040-01-616-5803
Scavenge Tube Assy

016165803
23085685: RNCC: 3 | RNVC: 2
23085685: RNCC: 3 | RNVC: 2

20 Feb 2013

3040-01-616-5798
Air Vent Tube Assy

016165798
23087725: RNCC: 3 | RNVC: 2

20 Feb 2013

3040-01-616-5422
Ai Valve Tube Assy

016165422
23087727: RNCC: 3 | RNVC: 2
23087727: RNCC: 3 | RNVC: 2

19 Feb 2013

3040-01-616-5415
Press Oi Tube Assy

016165415
23090278: RNCC: 3 | RNVC: 2

19 Feb 2013

3040-01-616-5408
Vent Oil Tube Assy

016165408
23087726: RNCC: 3 | RNVC: 2
23087726: RNCC: 3 | RNVC: 2

19 Feb 2013

3040-01-616-5399
Air Vent Tube Assy

016165399
23085677: RNCC: 3 | RNVC: 2

19 Feb 2013

3040-01-616-5394
Press Oi Tube Assy

016165394
23085683: RNCC: 3 | RNVC: 2
23085683: RNCC: 3 | RNVC: 2

19 Feb 2013

3040-01-616-5109
Linear Actuating Cylinder

016165109
UC128-OBF/1: RNCC: 3 | RNVC: 2

19 Feb 2013

3040-01-616-4364
Air Tube Assy

016164364
23088844: RNCC: 3 | RNVC: 2

13 Feb 2013

3040-01-616-2893
Shouldered Shaft

016162893
1J-203269MIL: RNCC: 3 | RNVC: 2

7 Feb 2013

3040-01-616-2883
Linear Actuating Cylinder Piston

016162883
050EE0012: RNCC: 3 | RNVC: 9
1007765: RNCC: 5 | RNVC: 2

7 Feb 2013

3040-01-616-2568
Rigid Connecting Link

016162568
4115C363: RNCC: 3 | RNVC: 2

6 Feb 2013

3040-01-616-1994
Straight Shaft

016161994
4115R318: RNCC: 3 | RNVC: 2

5 Feb 2013

3040-01-615-9789
Linear Actuating Cylinder Piston

016159789
050DE0010: RNCC: 3 | RNVC: 9
1007776: RNCC: 5 | RNVC: 2

29 Jan 2013

3040-01-615-9744
Linear Actuating Cylinder Assembly

016159744
1007027CT: RNCC: 3 | RNVC: 2
1007027CT: RNCC: 5 | RNVC: 2
100DL0039: RNCC: 5 | RNVC: 9
3J-S-16718: RNCC: 5 | RNVC: 9

29 Jan 2013

3040-01-615-9381
Linear Actuating Cylinder Piston

016159381
050DE0031: RNCC: 3 | RNVC: 9
1007773: RNCC: 5 | RNVC: 2

28 Jan 2013

3040-01-615-9027
Tube Assy Dever Nrp

016159027
23088071: RNCC: 3 | RNVC: 2
23088071: RNCC: 5 | RNVC: 2

27 Jan 2013

3040-01-615-8719
Friction Lining

016158719
EP-0008390: RNCC: 3 | RNVC: 2

25 Jan 2013

3040-01-615-8712
Piston Rod Guide

016158712
EP-0008784: RNCC: 3 | RNVC: 2

25 Jan 2013

3040-01-615-8598
Friction Lining

016158598
EP-0008392: RNCC: 3 | RNVC: 2

25 Jan 2013

3040-01-614-7420
Counterbalance Weight

016147420
010-1367-000: RNCC: 3 | RNVC: 2

13 Dec 2012

3040-01-614-7416
Counterbalance Weight

016147416
010-5640-003: RNCC: 3 | RNVC: 2

13 Dec 2012

3040-01-614-6748
Manual Control Lever

016146748
FDARM-ML-LG: RNCC: 3 | RNVC: 2

12 Dec 2012

3040-01-614-5088
Nonrotating Shaft Eye Bracket

016145088
GTA-500LWW-06: RNCC: 3 | RNVC: 2

6 Dec 2012

3040-01-614-4182
Shouldered Shaft

016144182
BH013-41: RNCC: 3 | RNVC: 2

4 Dec 2012

3040-01-614-0392
Counterbalance Weight

016140392
010-5640-001: RNCC: 3 | RNVC: 2
010-5640-XXX: RNCC: D | RNVC: 9

26 Nov 2012

3040-01-614-0301
Counterbalance Weight

016140301
010-5640-002: RNCC: 3 | RNVC: 2

26 Nov 2012

3040-01-613-7675
Belt-Chain Tension Adjusting Device

016137675
BH058-03: RNCC: 3 | RNVC: 2

16 Nov 2012

3040-01-613-5313
Shouldered Shaft

016135313
77590: RNCC: 3 | RNVC: 2

8 Nov 2012

3040-01-613-2900
Shaft Collar

016132900
010-5011-000: RNCC: 3 | RNVC: 2

5 Nov 2012

3040-01-613-1741
Helical Gear And Shaft Assembly

016131741
330-0001-001: RNCC: 3 | RNVC: 2

31 Oct 2012

3040-01-612-9908
Linear Actuating Cylinder Assembly

016129908
332/E6332: RNCC: 3 | RNVC: 2

26 Oct 2012

3040-01-612-9579
Linear Actuating Cylinder Assembly

016129579
332/E6295: RNCC: 3 | RNVC: 2

25 Oct 2012

3040-01-612-9545
Shouldered Shaft

016129545
332/E6300: RNCC: 3 | RNVC: 2

25 Oct 2012

3040-01-612-9490
Shouldered Shaft

016129490
332/E6299: RNCC: 3 | RNVC: 2

25 Oct 2012

3040-01-612-9465
Spur Gearshaft

016129465
LRR-0011118-0210: RNCC: 3 | RNVC: 2
LRR-0011118-0210: RNCC: 5 | RNVC: 2

25 Oct 2012

3040-01-612-8643
Shouldered Axle

016128643
332/E6280: RNCC: 3 | RNVC: 2

23 Oct 2012

3040-01-612-8339
Linear Actuating Cylinder Piston Rod

016128339
332/E6030: RNCC: 3 | RNVC: 2

22 Oct 2012

3040-01-612-7565
Linear Actuating Cylinder Cap

016127565
332/E6046: RNCC: 3 | RNVC: 2

19 Oct 2012

3040-01-612-7538
Linear Actuating Cylinder Piston Rod

016127538
332/E6042: RNCC: 3 | RNVC: 2

19 Oct 2012

3040-01-612-7508
Shouldered Shaft

016127508
208563PC1: RNCC: 3 | RNVC: 1

19 Oct 2012

3040-01-612-7463
Linear Actuating Cylinder Assembly

016127463
332/E6196: RNCC: 3 | RNVC: 2

19 Oct 2012

3040-01-612-7436
Linear Actuating Cylinder Assembly

016127436
332/E6044: RNCC: 3 | RNVC: 2

19 Oct 2012

3040-01-612-7286
Linear Actuating Cylinder Assembly

016127286
332/E6391: RNCC: 3 | RNVC: 2

19 Oct 2012

3040-01-612-7212
Linear Actuating Cylinder

016127212
332/E6032: RNCC: 3 | RNVC: 2

18 Oct 2012

3040-01-612-7067
Shouldered Shaft

016127067
332/E6235: RNCC: 3 | RNVC: 2

18 Oct 2012

3040-01-612-7086
Body Hub

016127086
332/E6243: RNCC: 3 | RNVC: 2

18 Oct 2012

3040-01-612-7073
Rigid Connecting Link

016127073
332/E6218: RNCC: 3 | RNVC: 2

18 Oct 2012

3040-01-612-7079
Rigid Connecting Link

016127079
332/E6217: RNCC: 3 | RNVC: 2

18 Oct 2012

3040-01-612-4842
Linear Actuating Cylinder Cap

016124842
332/E6033: RNCC: 3 | RNVC: 2

12 Oct 2012

3040-01-612-4485
Linear Actuating Cylinder Assembly

016124485
332/D9456: RNCC: 3 | RNVC: 2

11 Oct 2012

3040-01-612-4446
Shouldered Shaft

016124446
332/D9431: RNCC: 3 | RNVC: 2

11 Oct 2012

3040-01-612-3538
Linear Actuating Cylinder Assembly

016123538
MCTI-034-0777-00: RNCC: 3 | RNVC: 9

10 Oct 2012

3040-01-612-2573
Linear Actuating Cylinder Piston Rod

016122573
590/40562: RNCC: 3 | RNVC: 2

5 Oct 2012

3040-01-612-1910
Housing Adapter

016121910
CAS 10750: RNCC: 3 | RNVC: 2

4 Oct 2012

3040-01-612-1781
Linear Actuating Cylinder Piston

016121781
3G8138: RNCC: 3 | RNVC: 2

4 Oct 2012

3040-01-611-9600
Body Hub

016119600
MTM-10536: RNCC: 3 | RNVC: 2

28 Sep 2012

3040-01-611-8458
Control Cam

016118458
12285494: RNCC: 3 | RNVC: 2

26 Sep 2012

3040-01-611-7845
Manual Control Lever

016117845
12545051: RNCC: 3 | RNVC: 2

25 Sep 2012

3040-01-611-7662
Flexible Drive Shaft

016117662
12288442: RNCC: 3 | RNVC: 2

25 Sep 2012

3040-01-611-6895
Counterbalance Weight

016116895
12522199: RNCC: 3 | RNVC: 2

21 Sep 2012

3040-01-611-6725
Counterbalance Weight

016116725
12522316: RNCC: 3 | RNVC: 2

21 Sep 2012

3040-01-610-6611
Cylinder Support

016106611
823170: RNCC: 3 | RNVC: 2
3906903C1: RNCC: D | RNVC: 9

24 Aug 2012

3040-01-610-6255
Friction Lining

016106255
2307496-1: RNCC: 3 | RNVC: 2

23 Aug 2012

3040-01-610-4862
Linear Actuating Cylinder Assembly

016104862
2681322: RNCC: 3 | RNVC: 2

20 Aug 2012

3040-01-610-4717
Nonaircraft Mechanical Actuator

016104717
020750155: RNCC: 3 | RNVC: 2
29KP449: RNCC: 7 | RNVC: 2

17 Aug 2012

3040-01-610-2915
Shouldered Shaft

016102915
347/21287: RNCC: 3 | RNVC: 2

14 Aug 2012

3040-01-610-2762
Mechanical Drive Housing

016102762
2808408: RNCC: 3 | RNVC: 2

14 Aug 2012

3040-01-609-8767
Shaft Collar

016098767
8A112S1: RNCC: 3 | RNVC: 2

6 Aug 2012

3040-01-609-4784
Shouldered Axle

016094784
903/21399: RNCC: 3 | RNVC: 2

26 Jul 2012

3040-01-609-3677
Shaft Retaining Plate

016093677
300-0056: RNCC: 3 | RNVC: 2

24 Jul 2012

3040-01-609-3332
Pawl

016093332
E3-28-203-24: RNCC: 3 | RNVC: 2
J-E3-28-203-12: RNCC: D | RNVC: 9

23 Jul 2012

3040-01-609-3182
Control Cam

016093182
0311361: RNCC: 3 | RNVC: 2
2610629C91: RNCC: 5 | RNVC: 2

23 Jul 2012

3040-01-609-3175
Linear Actuating Cylinder Assembly

016093175
0306747: RNCC: 3 | RNVC: 2
3113890C1: RNCC: 5 | RNVC: 2
3113890C1L: RNCC: 5 | RNVC: 9

23 Jul 2012

3040-01-609-3164
Linear Actuating Cylinder Assembly

016093164
26833001: RNCC: 3 | RNVC: 2
2608632C1: RNCC: 5 | RNVC: 2

23 Jul 2012

3040-01-609-2601
Shaft Retaining Plate

016092601
144-7292: RNCC: 3 | RNVC: 2

20 Jul 2012

3040-01-609-2127
Shouldered Shaft

016092127
481/02127: RNCC: 3 | RNVC: 2

19 Jul 2012

3040-01-609-2020
Ball Joint Parts Kit

016092020
1800037: RNCC: 3 | RNVC: 2

19 Jul 2012

3040-01-609-1451
Nonaircraft Mechanical Actuator

016091451
17-3-3571-1: RNCC: 3 | RNVC: 2
17-3-3571: RNCC: D | RNVC: 9

18 Jul 2012

3040-01-609-1270
Straight Shaft

016091270
331/62795: RNCC: 3 | RNVC: 2

17 Jul 2012

3040-01-608-7030
Bell Crank

016087030
347/22949: RNCC: 3 | RNVC: 2

9 Jul 2012

3040-01-607-7874
Mechanical Drive Housing

016077874
143031732A01: RNCC: 3 | RNVC: 2

14 Jun 2012

3040-01-607-3103
Planetary Gears Carrier

016073103
7-511315117-001: RNCC: 3 | RNVC: 2

8 Jun 2012

3040-01-607-1100
Piston Ring

016071100
R8506194-SP102: RNCC: 3 | RNVC: 2
R8506194-SP102: RNCC: 5 | RNVC: 2

31 May 2012

3040-01-607-1102
Linear Actuating Cylinder Piston Rod

016071102
R8506193-SP102: RNCC: 3 | RNVC: 2
R8506193-SP102: RNCC: 5 | RNVC: 2

31 May 2012

3040-01-606-8409
Body Hub

016068409
04/600818: RNCC: 3 | RNVC: 2

24 May 2012

3040-01-606-8416
Rigid Connecting Link

016068416
10810085: RNCC: 3 | RNVC: 2
10810085: RNCC: 3 | RNVC: 9
10810085: RNCC: 5 | RNVC: 2

24 May 2012

3040-01-605-9172
Hub Clamp

016059172
47012: RNCC: 3 | RNVC: 2
47012: RNCC: 5 | RNVC: 2

1 May 2012

3040-01-605-8556
Disk Brake Shoe

016058556
HTB0450-112-302: RNCC: 3 | RNVC: 2
B14239 REV 1 ITEM 9: RNCC: 5 | RNVC: 2

26 Apr 2012

3040-01-605-8202
Shouldered Shaft

016058202
56115-ZW1-305: RNCC: 3 | RNVC: 9

26 Apr 2012

3040-01-605-8183
Pneumatic Actuator Cylinder Housing

016058183
163309: RNCC: 3 | RNVC: 9

26 Apr 2012

3040-01-605-7976
Shouldered Shaft

016057976
R8505647-SP102: RNCC: 3 | RNVC: 2
R8505647-SP102: RNCC: 5 | RNVC: 2

25 Apr 2012

3040-01-605-7905
Shouldered Shaft

016057905
012511203: RNCC: 3 | RNVC: 2

25 Apr 2012

3040-01-605-7898
Shaft Collar

016057898
012501802: RNCC: 3 | RNVC: 2

25 Apr 2012

3040-01-605-4503
Pivot Shaft Assembly

016054503
347/00139: RNCC: 3 | RNVC: 2

19 Apr 2012

3040-01-605-4186
Shaft Retaining Plate

016054186
2310484-1: RNCC: 3 | RNVC: 2

19 Apr 2012

3040-01-605-4014
Rigid Connecting Link

016054014
347/22014: RNCC: 3 | RNVC: 2

19 Apr 2012

3040-01-605-3856
Rigid Connecting Link

016053856
347/00441: RNCC: 3 | RNVC: 2

19 Apr 2012

3040-01-605-3656
Shaft Collar

016053656
24617-ZY3-000: RNCC: 3 | RNVC: 9

19 Apr 2012

3040-01-605-3451
Straight Shaft

016053451
GCV420391-001: RNCC: 3 | RNVC: 2

18 Apr 2012

3040-01-604-8494
Rotating Shaft Eye Bracket

016048494
123/07388: RNCC: 3 | RNVC: 2

13 Apr 2012

3040-01-604-7829
Mechanical Drive Housing

016047829
M777105489S: RNCC: 3 | RNVC: 2
26KP825: RNCC: 5 | RNVC: 2
26KP825: RNCC: 5 | RNVC: 9

13 Apr 2012

3040-01-604-5082
Mechanical Drive Housing

016045082
1U-4016: RNCC: 3 | RNVC: 2

6 Apr 2012

3040-01-604-3335
Linear Actuating Cylinder Piston Rod

016043335
56110-ZW1-701: RNCC: 3 | RNVC: 9
56110-ZW1-701: RNCC: 5 | RNVC: 2

3 Apr 2012

3040-01-604-1800
Linear Actuating Cylinder Piston Rod

016041800
3828744C1: RNCC: 3 | RNVC: 2

28 Mar 2012

3040-01-603-9172
Rigid Connecting Link

016039172
11580936: RNCC: 3 | RNVC: 2
11580936: RNCC: 5 | RNVC: 9

22 Mar 2012

3040-01-603-8936
Rigid Connecting Link

016038936
11580934: RNCC: 3 | RNVC: 2

21 Mar 2012

3040-01-603-8863
Mechanically Actuated Spindle

016038863
11580941: RNCC: 3 | RNVC: 2

20 Mar 2012

3040-01-603-8814
Rigid Connecting Link

016038814
11580933: RNCC: 3 | RNVC: 2

20 Mar 2012

3040-01-603-6946
Linear Actuating Cylinder Piston

016036946
9T-8563: RNCC: 3 | RNVC: 2

12 Mar 2012

3040-01-603-5909
Linear Actuating Cylinder Piston

016035909
2545048: RNCC: 3 | RNVC: 2

8 Mar 2012

3040-01-603-2247
Straight Shaft

016032247
11580912: RNCC: 3 | RNVC: 2

24 Feb 2012

3040-01-603-1437
Spec Shaft

016031437
129508-11250: RNCC: 3 | RNVC: 9
129508-11250: RNCC: C | RNVC: 1

23 Feb 2012

3040-01-602-9261
Breather

016029261
57XL-40: RNCC: 3 | RNVC: 2

14 Feb 2012

3040-01-602-8040
Lub Oil Pump Shaft

016028040
494111400: RNCC: 3 | RNVC: 2
C6204511620: RNCC: 5 | RNVC: 9

7 Feb 2012

3040-01-602-6254
Bevel Gearshaft

016026254
9D0906: RNCC: 3 | RNVC: 2

1 Feb 2012

3040-01-602-6086
Piston Rod Guide

016026086
1U3901: RNCC: 3 | RNVC: 2

1 Feb 2012

3040-01-602-6087
Piston Rod Guide

016026087
9T6682: RNCC: 3 | RNVC: 2

1 Feb 2012

3040-01-602-4934
Linear Actuating Cylinder Head

016024934
9T3957: RNCC: 3 | RNVC: 2

31 Jan 2012

3040-01-602-4932
Linear Actuating Cylinder Head

016024932
9T6683: RNCC: 3 | RNVC: 2

31 Jan 2012

3040-01-602-2775
Linear Actuating Cylinder

016022775
1U4011: RNCC: 3 | RNVC: 2

28 Jan 2012

3040-01-601-8004
Planetary Gears Carrier

016018004
8W9697: RNCC: 3 | RNVC: 2

25 Jan 2012

3040-01-601-7307
Mechanical Drive Housing Part

016017307
1429961: RNCC: 3 | RNVC: 2

20 Jan 2012

3040-01-601-7304
Shouldered Shaft

016017304
8W8138: RNCC: 3 | RNVC: 2

20 Jan 2012

3040-01-601-7057
Shaft Retaining Plate

016017057
2G4553: RNCC: 3 | RNVC: 2

19 Jan 2012

3040-01-601-7006
Mechanical Drive Housing Part

016017006
1967569: RNCC: 3 | RNVC: 2

19 Jan 2012

3040-01-601-6973
Shaft Retaining Plate

016016973
1165312: RNCC: 3 | RNVC: 2

19 Jan 2012

3040-01-601-6920
Shaft Retaining Plate

016016920
8W4709: RNCC: 3 | RNVC: 2

19 Jan 2012

3040-01-601-2917
Mechanical Drive Housing Part

016012917
8W8136: RNCC: 3 | RNVC: 2

19 Jan 2012

3040-01-601-2908
Mechanical Drive Housing Part

016012908
8W8137: RNCC: 3 | RNVC: 2

19 Jan 2012

3040-01-601-0943
Shouldered Shaft

016010943
7J4981: RNCC: 3 | RNVC: 2

5 Jan 2012

3040-01-601-0946
Shouldered Shaft

016010946
52720820: RNCC: 3 | RNVC: 2
24KP269: RNCC: 5 | RNVC: 2
24KP269: RNCC: 5 | RNVC: 9

5 Jan 2012

3040-01-600-7371
Linear Actuating Cylinder Cap

016007371
124059: RNCC: 3 | RNVC: 9
124059: RNCC: 5 | RNVC: 2

15 Dec 2011

3040-01-600-7367
Linear Actuating Cylinder Cap

016007367
124057: RNCC: 3 | RNVC: 9
124057: RNCC: 5 | RNVC: 2

15 Dec 2011

3040-01-600-7370
Linear Actuating Cylinder Cap

016007370
124058: RNCC: 3 | RNVC: 9
124058: RNCC: 5 | RNVC: 2

15 Dec 2011

3040-01-600-7366
Linear Actuating Cylinder Cap

016007366
124056: RNCC: 3 | RNVC: 9
124056: RNCC: 5 | RNVC: 2

15 Dec 2011

3040-01-600-7024
Linear Actuating Cylinder Assembly

016007024
3776921025: RNCC: 3 | RNVC: 2

15 Dec 2011

3040-01-600-6353
Linear Actuating Cylinder Assembly

016006353
GDLS1047: RNCC: 3 | RNVC: 2
R0117843: RNCC: 5 | RNVC: 2
R0117843: RNCC: 5 | RNVC: 2
R0117843-0102: RNCC: D | RNVC: 9

13 Dec 2011

3040-01-600-6315
Linear Actuating Cylinder Piston Rod

016006315
187787: RNCC: 3 | RNVC: 9
187787: RNCC: 5 | RNVC: 2

13 Dec 2011

3040-01-600-6308
Linear Actuating Cylinder Piston Rod

016006308
187786: RNCC: 3 | RNVC: 9
187786: RNCC: 5 | RNVC: 2

13 Dec 2011

3040-01-600-3848
Rigid Connecting Link

016003848
237-0355: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-01-600-3846
Rigid Connecting Link

016003846
233-0084: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-01-600-3835
Rigid Connecting Link

016003835
229-2983: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-01-600-3845
Rigid Connecting Link

016003845
233-0087: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-01-600-3842
Rigid Connecting Link

016003842
233-0086: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-01-600-3838
Rigid Connecting Link

016003838
229-2985: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-01-600-3841
Rigid Connecting Link

016003841
233-0085: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-01-600-3818
Rigid Connecting Link

016003818
8X-3363: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-01-600-3817
Rigid Connecting Link

016003817
8X-3362: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-01-600-3764
Rigid Connecting Link

016003764
2066276: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-01-600-2592
Rigid Connecting Link

016002592
145C3340-17: RNCC: 3 | RNVC: 2

18 Nov 2011

3040-01-600-1537
Cylinder Support

016001537
4-1-4.33-ME-PLE-30LBS: RNCC: 3 | RNVC: 2

14 Nov 2011

3040-01-599-6295
Nonaircraft Mechanical Actuator

015996295
H455982-50: RNCC: 3 | RNVC: 2

6 Oct 2011

3040-01-599-2569
Straight Shaft

015992569
4303204: RNCC: 3 | RNVC: 2
4303204: RNCC: 5 | RNVC: 2

20 Sep 2011

3040-01-599-2570
Rigid Connecting Link

015992570
4306617: RNCC: 3 | RNVC: 2
4306617: RNCC: 5 | RNVC: 2

20 Sep 2011

3040-01-598-8468
Body Hub

015988468
884011542A06: RNCC: 3 | RNVC: 2

30 Aug 2011

3040-01-598-8460
Hydraulic Control Assembly

015988460
5272: RNCC: 3 | RNVC: 2

30 Aug 2011

3040-01-598-2776
Rigid Connecting Link

015982776
L15016-03: RNCC: 3 | RNVC: 2
L15016: RNCC: D | RNVC: 9

18 Jul 2011

3040-01-598-2775
Rigid Connecting Link

015982775
L15016-04: RNCC: 3 | RNVC: 2
L15016: RNCC: D | RNVC: 9

18 Jul 2011

3040-01-598-1982
Shaft Collar

015981982
353971-1: RNCC: 3 | RNVC: 9

8 Jul 2011

3040-01-597-9260
Stub Shaft

015979260
16480N18: RNCC: 3 | RNVC: 2
PL-15692N18ITEM32D: RNCC: 5 | RNVC: 2

22 Jun 2011

3040-01-597-2892
Linear Actuating Cylinder Piston

015972892
79993: RNCC: 3 | RNVC: 2

6 Jun 2011

3040-01-596-7813
Straight Shaft

015967813
C6205435500: RNCC: 3 | RNVC: 2

24 May 2011

3040-01-596-7130
Mechanically Actuated Spindle

015967130
V59878: RNCC: 3 | RNVC: 2

23 May 2011

3040-01-596-6672
Shaft Retaining Plate

015966672
ID-14-100: RNCC: 3 | RNVC: 9

20 May 2011

3040-01-596-6052
Rigid Connecting Link

015966052
9753307G: RNCC: 3 | RNVC: 2

19 May 2011

3040-01-596-5690
Rigid Connecting Link

015965690
8078142: RNCC: 3 | RNVC: 2

19 May 2011

3040-01-596-5634
Counterbalance Weight

015965634
305156: RNCC: 3 | RNVC: 2

19 May 2011

3040-01-596-5632
Rigid Connecting Link

015965632
205291: RNCC: 3 | RNVC: 2

19 May 2011

3040-01-596-5401
Rigid Connecting Link

015965401
SCGP-E1LT-1: RNCC: 3 | RNVC: 2
SCGP-E1-A: RNCC: D | RNVC: 9

19 May 2011

3040-01-596-5371
Linear Actuating Cylinder Assembly

015965371
9257711G: RNCC: 3 | RNVC: 2
205291: RNCC: 5 | RNVC: 2
205291: RNCC: 5 | RNVC: 2

19 May 2011

3040-01-596-4473
Shouldered Shaft

015964473
A4946: RNCC: 3 | RNVC: 2

17 May 2011

3040-01-596-4441
Shouldered Shaft

015964441
0202-1237-01: RNCC: 3 | RNVC: 9

17 May 2011

3040-01-595-9926
Shouldered Shaft

015959926
B4951: RNCC: 3 | RNVC: 2

10 May 2011

3040-01-595-9546
Shaft Collar

015959546
040054: RNCC: 3 | RNVC: 2

9 May 2011

3040-01-595-9357
Remote Control Lever

015959357
9941.0030: RNCC: 3 | RNVC: 2

9 May 2011

3040-01-595-6614
Straight Shaft

015956614
CR75SD-500DS: RNCC: 3 | RNVC: 2

4 May 2011

3040-01-593-5448
Hydraulic Accumulator

015935448
772-8328972: RNCC: 3 | RNVC: 2
772-8328972: RNCC: 5 | RNVC: 2

11 Apr 2011

3040-01-592-8641
Rigid Connecting Link

015928641
ML9-16.42: RNCC: 3 | RNVC: 2
ML9-L: RNCC: D | RNVC: 9

23 Mar 2011

3040-01-592-8609
Rigid Connecting Link

015928609
ML5-21.00: RNCC: 3 | RNVC: 2
ML5-L: RNCC: D | RNVC: 9

23 Mar 2011

3040-01-592-7343
Pull Out Piston

015927343
1J0367: RNCC: 3 | RNVC: 2

17 Mar 2011

3040-01-592-6585
Bell Crank

015926585
R0119065: RNCC: 3 | RNVC: 2
R0119065: RNCC: 5 | RNVC: 2
R0119065-0102: RNCC: D | RNVC: 9

15 Mar 2011

3040-01-592-6583
Bell Crank

015926583
R0114427: RNCC: 3 | RNVC: 2
R0114427: RNCC: 5 | RNVC: 2
R0114427-0102: RNCC: D | RNVC: 9

15 Mar 2011

3040-01-592-3111
Afocal Shaft

015923111
4977007-3: RNCC: 3 | RNVC: 2

2 Mar 2011

Load More Results