What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 146 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 146 of 300

3040-01-226-9738
Upper Shaft Assembly

012269738
5749959-71: RNCC: 3 | RNVC: 2
562-5749959-1: RNCC: 5 | RNVC: 2
5749959-1: RNCC: 5 | RNVC: 9
5749959-71: RNCC: C | RNVC: 1

26 Feb 1986

3040-01-206-7584
Shouldered Shaft

012067584
5749959-69: RNCC: 3 | RNVC: 2
5749959-7: RNCC: 5 | RNVC: 9
5749959-69: RNCC: C | RNVC: 1

22 Apr 1985

3040-01-202-6508
Control Cam

012026508
3037-682: RNCC: 3 | RNVC: 2

5 Mar 1985

3040-01-209-1997
Shouldered Shaft

012091997
L6314020-003: RNCC: 3 | RNVC: 2
L6314020-003: RNCC: 5 | RNVC: 2
L6314020-003: RNCC: 5 | RNVC: 2

25 May 1985

3040-01-188-3622
Rigid Connecting Link

011883622
300360-101: RNCC: 3 | RNVC: 2

2 Sep 1984

3040-01-180-1563
Shouldered Shaft

011801563
P12611635: RNCC: 3 | RNVC: 2
P12611635: RNCC: 3 | RNVC: 9

25 May 1984

3040-01-181-3715
Shouldered Shaft

011813715
408Z0011J026Z: RNCC: 3 | RNVC: 2

29 Jan 2002

3040-01-180-5065
Pinion Gear Shaft

011805065
SM-C-803319: RNCC: 3 | RNVC: 2

30 May 1984

3040-01-126-7799
Straight Shaft

011267799
12308157: RNCC: 3 | RNVC: 2

17 Feb 1982

3040-01-129-0840
Shaft Retaining Plate

011290840
12304652: RNCC: 3 | RNVC: 2
3040011290840: RNCC: 6 | RNVC: 9

31 Mar 1982

3040-01-102-8206
Rigid Connecting Link

011028206
12280580: RNCC: 3 | RNVC: 2
3040011028206: RNCC: 6 | RNVC: 9
12280580: RNCC: D | RNVC: 9

29 Oct 1980

3040-01-102-8205
Rigid Connecting Link

011028205
12280575-3: RNCC: 3 | RNVC: 2
3040011028205: RNCC: 6 | RNVC: 9
12280575: RNCC: D | RNVC: 9

29 Oct 1980

3040-01-117-7610
Spur Gearshaft

011177610
347-21006-1: RNCC: 3 | RNVC: 2

21 Aug 1981

3040-01-106-2798
Mechanical Drive Housing

011062798
RE-F102100: RNCC: 3 | RNVC: 2

15 Jan 1981

3040-01-011-4932
Spur Gearshaft

010114932
742361: RNCC: 3 | RNVC: 2
742361: RNCC: 5 | RNVC: 2

23 Oct 1975

3040-01-047-1390
Rigid Connecting Link

010471390
661608-1: RNCC: 3 | RNVC: 2
661608-1: RNCC: 5 | RNVC: 9

1 Sep 1977

3040-01-029-9353
Resonance Chan Shoe

010299353
65-5691-156: RNCC: 3 | RNVC: 2

26 Oct 1976

3040-00-943-1688
Rigid Connecting Link

009431688
65207-02003-045: RNCC: 3 | RNVC: 2
65207-02003-045: RNCC: 5 | RNVC: 2
65207-02003-045: RNCC: 5 | RNVC: 9
65207-02003-045: RNCC: 8 | RNVC: 2

21 Dec 1965

3040-00-756-2703
Manual Control Lever

007562703
11631554: RNCC: 3 | RNVC: 2

28 Feb 1968

3040-00-779-6868
Detent Plate

007796868
7132942-01: RNCC: 3 | RNVC: 2
7132942-01: RNCC: 5 | RNVC: 2
6-82061-1: RNCC: 5 | RNVC: 2
6-82061-1: RNCC: 5 | RNVC: 9
6-82061-1: RNCC: 5 | RNVC: 9
6-82061-1: RNCC: 5 | RNVC: 9
6-82061-1: RNCC: C | RNVC: 1

1 Jan 1962

3040-00-693-1112
Shouldered Shaft

006931112
323916PC2: RNCC: 3 | RNVC: 2
298687PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-518-5318
Linear Actuating Cylinder Assembly

005185318
6711-017-2: RNCC: 3 | RNVC: 9
215-00509-2: RNCC: 5 | RNVC: 2
215-00509-2: RNCC: 5 | RNVC: 2
6711-017-2: RNCC: 5 | RNVC: 9
6711-017: RNCC: 5 | RNVC: 9

11 Jun 1969

3040-00-364-1951
Shaft Retaining Plate

003641951
3272639: RNCC: 3 | RNVC: 2
3272639: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-383-6757
Lever Shoe

003836757
T756000: RNCC: 3 | RNVC: 2
74ND6074: RNCC: 3 | RNVC: 9
T756000: RNCC: 5 | RNVC: 9
74ND6074: RNCC: 5 | RNVC: 9
74ND6047: RNCC: 5 | RNVC: 9
756005: RNCC: 5 | RNVC: 9
ND6534PC74: RNCC: 5 | RNVC: 9
74ND6047: RNCC: 5 | RNVC: 9
756005: RNCC: 5 | RNVC: 9
ND6534PC74: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-228-0424
Rigid Connecting Link

002280424
123C10213-501: RNCC: 3 | RNVC: 2
123C10213-501 REV E: RNCC: 5 | RNVC: 2
123C10213-501: RNCC: 5 | RNVC: 9
123C10213-501: RNCC: C | RNVC: 1
2123C10213-1: RNCC: C | RNVC: 1
123C10213: RNCC: D | RNVC: 9

10 Sep 1972

3040-00-248-6126
Battery Tray Shaft

002486126
70-4266: RNCC: 3 | RNVC: 2
04306-0309: RNCC: 5 | RNVC: 9
70-4266: RNCC: 5 | RNVC: 9

9 Jun 1973

3040-00-171-2037
Nose Tow Cam Assy

001712037
123L10074-501: RNCC: 3 | RNVC: 2
123L10074-501: RNCC: 5 | RNVC: 2
123L10074-501: RNCC: 5 | RNVC: 9
123L10074-1: RNCC: E | RNVC: 8

21 Aug 1972

3040-00-068-1552
Hydraulic Accumulator

000681552
52W1738-1: RNCC: 3 | RNVC: 2
52W1738-1: RNCC: 5 | RNVC: 9
3040PL0811259: RNCC: 6 | RNVC: 9

5 Jul 1967

3040-01-685-8295
Rigid Connecting Link

016858295
29-5948: RNCC: 3 | RNVC: 2

15 Jan 2020

3040-01-494-8568
Shouldered Shaft

014948568
551-7068554-4: RNCC: 3 | RNVC: 2
H845-1801-4: RNCC: 5 | RNVC: 2
551-7068554: RNCC: D | RNVC: 9

26 Feb 2002

3040-01-492-4451
Piston Ring

014924451
V2C13611-1: RNCC: 3 | RNVC: 2
V1E10522 ITEM 21: RNCC: 5 | RNVC: 1

28 Nov 2001

3040-01-488-7648
Straight Shaft

014887648
4D10688-001: RNCC: 3 | RNVC: 2
6511E89FN7: RNCC: 5 | RNVC: 2
6511E89: RNCC: D | RNVC: 9
4D10688: RNCC: D | RNVC: 9

4 Sep 2001

3040-01-483-5404
Spur Gearshaft

014835404
7225900: RNCC: 3 | RNVC: 2
D1416765: RNCC: 5 | RNVC: 2

2 Apr 2001

3040-01-483-5460
Spur Gearshaft

014835460
7377560: RNCC: 3 | RNVC: 2
D1418388: RNCC: 5 | RNVC: 2

2 Apr 2001

3040-01-446-1287
Rigid Connecting Link

014461287
L5202051-011: RNCC: 3 | RNVC: 2

23 Jun 1997

3040-01-327-7765
Remote Control Lever

013277765
1286M44G01: RNCC: 3 | RNVC: 2
1286M: RNCC: D | RNVC: 9

21 Oct 1990

3040-01-324-5130
Shouldered Shaft

013245130
12364214: RNCC: 3 | RNVC: 2
12364214: RNCC: 5 | RNVC: 2

19 Aug 1990

3040-01-283-5994
Roller Guide

012835994
15PA104: RNCC: 3 | RNVC: 2
15PA104: RNCC: 5 | RNVC: 2
EN10949: RNCC: 5 | RNVC: 9

9 Aug 1988

3040-00-036-3437
Governor Level Shaft

000363437
29916: RNCC: 3 | RNVC: 9
D2897PC195: RNCC: 5 | RNVC: 9
A5814: RNCC: 5 | RNVC: 9
E2876PC195: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-026-6728
Shouldered Shaft

000266728
404164PC1: RNCC: 3 | RNVC: 2
404164-1: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-004-9100
Solenoid Shaft

000049100
2220337: RNCC: 3 | RNVC: 2

14 Jun 1972

3040-00-001-7099
Indicator Collar

000017099
746575-1: RNCC: 3 | RNVC: 2
746575-1: RNCC: 5 | RNVC: 2

29 Sep 1972

3040-01-602-6178
Cylinder Rod End

016026178
101 083 20: RNCC: 3 | RNVC: 2
FFP101 083 20: RNCC: 5 | RNVC: 2
10108320 2627008: RNCC: 5 | RNVC: 9
10345881: RNCC: 6 | RNVC: 9
101 083 20: RNCC: 6 | RNVC: 9

1 Feb 2012

3040-01-614-0010
Rigid Connecting Link

016140010
724S2613-3: RNCC: 3 | RNVC: 2

21 Nov 2012

3040-01-606-6473
Control Cam

016066473
08002168: RNCC: 3 | RNVC: 2
PL08002032 REV W FIND NO,34: RNCC: 5 | RNVC: 2

22 May 2012

3040-01-625-3916
Rigid Connecting Link

016253916
123CSM10033-507: RNCC: 3 | RNVC: 2
123CSM10033-507: RNCC: 3 | RNVC: 9
123CSM10033-507: RNCC: 5 | RNVC: 9

3 Feb 2014

3040-01-688-3259
Mechanical Drive Housing Part

016883259
4984429-1: RNCC: 3 | RNVC: 2

13 May 2020

3040-01-602-3950
Brake Drum

016023950
009-040-01: RNCC: 3 | RNVC: 9
DX009-040-01: RNCC: 5 | RNVC: 2

30 Jan 2012

3040-01-629-6018
Nonaircraft Mechanical Actuator

016296018
2ASL12024: RNCC: 3 | RNVC: 1
2ASL12024: RNCC: 3 | RNVC: 9

8 Jul 2014

3040-01-655-5148
Linear Actuating Cylinder Assembly

016555148
U008964108: RNCC: 3 | RNVC: 2
U008964108: RNCC: 5 | RNVC: 2

31 May 2016

3040-01-611-5709
Brake Shoe Push Rod

016115709
379736-002: RNCC: 3 | RNVC: 2
481679ITEM3: RNCC: 5 | RNVC: 2

19 Sep 2012

3040-01-616-1316
Hub Clamp

016161316
8243479: RNCC: 3 | RNVC: 2

4 Feb 2013

3040-01-623-1755
Friction Lining

016231755
544976302: RNCC: 3 | RNVC: 2

4 Nov 2013

3040-01-618-1089
Straight Shaft

016181089
109808-1: RNCC: 3 | RNVC: 2

12 Apr 2013

3040-01-606-3263
Shouldered Shaft

016063263
80389L002: RNCC: 3 | RNVC: 2
47026X120-Y-RXP ITEM 3: RNCC: 5 | RNVC: 2

16 May 2012

3040-01-621-8155
Counterbalance Weight

016218155
IH-490A-00: RNCC: 3 | RNVC: 2
IH-490-00: RNCC: 5 | RNVC: 9

18 Sep 2013

3040-01-604-6683
Straight Shaft

016046683
895835: RNCC: 3 | RNVC: 2

11 Apr 2012

3040-01-565-2836
Nonaircraft Mechanical Actuator

015652836
206-0408: RNCC: 3 | RNVC: 2
1548042: RNCC: 5 | RNVC: 9

18 Jul 2008

3040-01-577-8694
Rigid Connecting Link

015778694
757001010A02: RNCC: 3 | RNVC: 2

21 Sep 2009

3040-01-582-2251
Camfollower Pivot

015822251
4977185-2: RNCC: 3 | RNVC: 2

11 Feb 2010

3040-01-598-7632
Manual Control Lever

015987632
8742809-80: RNCC: 3 | RNVC: 2

25 Aug 2011

3040-01-572-5774
Belt-Chain Tension Adjusting Device

015725774
109760-1: RNCC: 3 | RNVC: 2

16 Mar 2009

3040-01-564-0917
Rigid Connecting Link

015640917
803-6397268 PC 165: RNCC: 3 | RNVC: 2

4 Jun 2008

3040-01-570-7968
Linear Actuating Cylinder Assembly

015707968
87486624: RNCC: 3 | RNVC: 2

14 Jan 2009

3040-01-595-9078
Manual Control Lever

015959078
12510011: RNCC: 3 | RNVC: 2

6 May 2011

3040-01-549-6067
Shouldered Shaft

015496067
0232-2006: RNCC: 3 | RNVC: 2
990-2506000 FIND 16: RNCC: 5 | RNVC: 9
197.63 DOG SHAFT NT: RNCC: 5 | RNVC: 9

26 Mar 2007

3040-01-560-9200
Linear Actuating Cylinder Piston

015609200
596-7410825-18: RNCC: 3 | RNVC: 2
B434-2650-18: RNCC: 5 | RNVC: 2

20 Feb 2008

3040-01-563-7252
Linear Actuating Cylinder

015637252
1H000020771: RNCC: 3 | RNVC: 2
4.00CBB-2HCTS14CX45.000: RNCC: 5 | RNVC: 9
GG577305AA: RNCC: 5 | RNVC: 9

20 May 2008

3040-01-587-9195
Rigid Connecting Link

015879195
K133775: RNCC: 3 | RNVC: 2
K13375: RNCC: 5 | RNVC: 9

25 Aug 2010

3040-01-538-4728
Linear Actuating Cylinder Piston Rod

015384728
A7-D3305: RNCC: 3 | RNVC: 2
D3328 ITEM 39: RNCC: 5 | RNVC: 2

23 Mar 2006

3040-01-524-9740
Inertia Damper

015249740
JE140313X20S6L: RNCC: 3 | RNVC: 2
JE-1403 ASSEMBLY 2: RNCC: 5 | RNVC: 2

25 Oct 2004

3040-01-525-5204
Straight Shaft

015255204
111072: RNCC: 3 | RNVC: 2
111072: RNCC: 5 | RNVC: 2

15 Nov 2004

3040-01-534-1357
Shouldered Shaft

015341357
T002014175: RNCC: 3 | RNVC: 2
U000003889 ITEM 005: RNCC: 5 | RNVC: 2

11 Oct 2005

3040-01-504-5414
Linear Actuating Cylinder Piston Rod

015045414
8036239: RNCC: 3 | RNVC: 2
8036239: RNCC: 5 | RNVC: 9

31 Jan 2003

3040-01-514-0073
Linear Actuating Cylinder Assembly Parts Kit

015140073
3J14755: RNCC: 3 | RNVC: 2

14 Oct 2003

3040-01-490-4277
Airc Spline Adapter

014904277
101999-5-1: RNCC: 3 | RNVC: 2

27 Sep 2001

3040-01-475-0237
Rigid Connecting Link

014750237
AT154693: RNCC: 3 | RNVC: 9
3056355H: RNCC: 5 | RNVC: 9

18 May 2000

3040-01-495-4833
Straight Shaft Assembly

014954833
9330762: RNCC: 3 | RNVC: 2
9330770 FIND NO 8: RNCC: 5 | RNVC: 2
9330762: RNCC: 5 | RNVC: 2
9330762: RNCC: 5 | RNVC: 9
9330770: RNCC: D | RNVC: 9

18 Mar 2002

3040-01-499-4081
Mechanically Actuated Spindle

014994081
123-4322589 PART 21: RNCC: 3 | RNVC: 2
4322589: RNCC: D | RNVC: 9

23 Jul 2002

3040-01-489-1431
Airc Spline Adapter

014891431
101999-25-1: RNCC: 3 | RNVC: 2

13 Sep 2001

3040-01-483-5096
Shouldered Shaft

014835096
167-7066805-130: RNCC: 3 | RNVC: 2
H547-2003-130: RNCC: 5 | RNVC: 2
7066805: RNCC: D | RNVC: 9

30 Mar 2001

3040-01-484-0135
Housing Adapter

014840135
6983528: RNCC: 3 | RNVC: 2

16 Apr 2001

3040-01-480-2552
Linear Actuating Cylinder Assembly

014802552
4.00KJJ2HRNAT1S14A19A4.250: RNCC: 3 | RNVC: 2
GG714940A: RNCC: 5 | RNVC: 2
4KJJ/JJ2HCTS14A: RNCC: 5 | RNVC: 2
582015-001: RNCC: 5 | RNVC: 2
994KJJ/JJ545: RNCC: 5 | RNVC: 9
4KJJ/JJ2HCTS14A/19A X 4.250: RNCC: 5 | RNVC: 9
SKC164743: RNCC: D | RNVC: 9

13 Nov 2000

3040-01-476-2509
Mechanically Actuated Spindle

014762509
124-4322629 PC 20: RNCC: 3 | RNVC: 2
124-4322628 PC 60: RNCC: 5 | RNVC: 2
124-4322629: RNCC: D | RNVC: 9

5 Jul 2000

3040-01-500-3885
Multiple Gears Gearshaft

015003885
2P53527006A: RNCC: 3 | RNVC: 2

23 Aug 2002

3040-01-486-3894
Shaft Collar

014863894
518-5794755 ITEM 21: RNCC: 3 | RNVC: 2
2018-4 ITEM 21: RNCC: 5 | RNVC: 2
2018-4: RNCC: D | RNVC: 9
5794755: RNCC: D | RNVC: 9

27 Jun 2001

3040-01-440-9824
Shouldered Axle

014409824
12448082: RNCC: 3 | RNVC: 2

30 Jan 1997

3040-01-470-4111
Housing Adapter

014704111
7-562107001-601: RNCC: 3 | RNVC: 2

18 Dec 1999

3040-01-411-3342
Straight Shaft

014113342
184080-2: RNCC: 3 | RNVC: 2
184080-2: RNCC: 5 | RNVC: 2

22 Mar 1995

3040-01-417-5835
Linear Actuating Cylinder

014175835
421642: RNCC: 3 | RNVC: 2
33959: RNCC: 5 | RNVC: 2
33959: RNCC: 5 | RNVC: 2
33959: RNCC: 5 | RNVC: 9

10 Aug 1995

3040-01-447-1872
Remote Control Lever

014471872
200913893-01: RNCC: 3 | RNVC: 2
200913893-01: RNCC: 3 | RNVC: 2
581R016: RNCC: 5 | RNVC: 9
581R016I: RNCC: 5 | RNVC: 9

29 Jul 1997

3040-01-469-1956
Linear Actuating Cylinder Assembly

014691956
AG201180B0: RNCC: 3 | RNVC: 2

5 Nov 1999

3040-01-410-9204
Rigid Connecting Link

014109204
L3400104-009: RNCC: 3 | RNVC: 2

15 Mar 1995

3040-01-422-5570
Remote Control Lever

014225570
12364894: RNCC: 3 | RNVC: 2
12364894: RNCC: 5 | RNVC: 2
12364894: RNCC: 5 | RNVC: 2

4 Dec 1995

3040-01-422-5569
Remote Control Lever

014225569
12364893: RNCC: 3 | RNVC: 2
12364893: RNCC: 5 | RNVC: 2
12364893: RNCC: 5 | RNVC: 2

4 Dec 1995

3040-01-430-2699
Flexible Shaft Assembly

014302699
22001-100 X 10'4": RNCC: 3 | RNVC: 2
B-400-22001-100: RNCC: 5 | RNVC: 1
B400-22001-100-226IN: RNCC: 5 | RNVC: 2
B-400-22001: RNCC: D | RNVC: 9

25 Apr 1996

3040-01-441-0434
Shouldered Shaft

014410434
3907455: RNCC: 3 | RNVC: 2

31 Jan 1997

3040-01-463-4256
Rigid Connecting Link

014634256
803-6397268 PC53 ZINC PLATED: RNCC: 3 | RNVC: 2
8100-1251-0307 PC NO 53: RNCC: 5 | RNVC: 2
803-6397269 PC27 ZINC PLATED: RNCC: 5 | RNVC: 2
6397269: RNCC: D | RNVC: 9

19 Mar 1999

3040-01-414-4389
Shouldered Shaft

014144389
4443-045: RNCC: 3 | RNVC: 2
9988-866 ITEM 22: RNCC: 5 | RNVC: 2
9988-866: RNCC: D | RNVC: 9

7 Jun 1995

3040-01-430-2861
Shouldered Shaft

014302861
5363418: RNCC: 3 | RNVC: 2
6894422 ITEM 48: RNCC: 5 | RNVC: 2
6894422: RNCC: D | RNVC: 9

26 Apr 1996

3040-01-412-5285
Spline Adapter

014125285
A15PS257: RNCC: 1 | RNVC: 2
118041-6: RNCC: 3 | RNVC: 2
A15PS257-6: RNCC: 5 | RNVC: 2
118041-6: RNCC: 5 | RNVC: 9
118041: RNCC: D | RNVC: 9

20 Apr 1995

3040-01-451-6487
Linear Actuating Cylinder Assembly

014516487
52C9105-1: RNCC: 3 | RNVC: 2

23 Dec 1997

3040-01-444-3168
Shouldered Shaft

014443168
901-032-119-101: RNCC: 3 | RNVC: 2

5 May 1997

3040-01-372-4234
Rigid Connecting Link

013724234
209-062-759-101: RNCC: 3 | RNVC: 2

10 Mar 1993

3040-01-372-1546
Linear Actuating Cylinder Assembly

013721546
6-372-003501: RNCC: 3 | RNVC: 2
6-372-003501: RNCC: 5 | RNVC: 2
6-372-003501: RNCC: 5 | RNVC: 2

3 Mar 1993

3040-01-383-7224
Rotating Shaft Eye Bracket

013837224
12909209: RNCC: 3 | RNVC: 2

1 Dec 1993

3040-01-376-1398
Spur Gearshaft

013761398
42315-70: RNCC: 3 | RNVC: 2
42315-70: RNCC: 5 | RNVC: 9
42315-70: RNCC: 5 | RNVC: 9

27 May 1993

3040-01-384-6218
Shouldered Shaft

013846218
2499846: RNCC: 3 | RNVC: 2

19 Dec 1993

3040-01-341-5037
Control Cam

013415037
14475-01G: RNCC: 3 | RNVC: 2
16944 FIND NO 13: RNCC: 5 | RNVC: 9

1 Jul 1991

3040-01-369-7705
Linear Actuating Cylinder Assembly

013697705
501-01-0998: RNCC: 3 | RNVC: 2
501-01-0998: RNCC: 3 | RNVC: 9

6 Jan 1993

3040-01-348-4399
Shouldered Shaft

013484399
845-6556197-1: RNCC: 3 | RNVC: 1
845-6556172ITEM25: RNCC: 5 | RNVC: 1
845-6556171ITEM25: RNCC: 5 | RNVC: 2

9 Nov 1991

3040-01-342-9928
Rigid Connecting Link

013429928
70209-22413-118: RNCC: 3 | RNVC: 2

2 Aug 1991

3040-01-301-8986
Linear Actuating Cylinder Assembly

013018986
1H2H0A00277297: RNCC: 3 | RNVC: 2
GG122908L0: RNCC: 5 | RNVC: 9

5 Jun 1989

3040-01-311-3245
Linear Actuating Cylinder Assembly

013113245
GG122908D0: RNCC: 3 | RNVC: 2

23 Nov 1989

3040-01-314-8858
Brake Pressure Plate Assembly

013148858
9240-032-46: RNCC: 3 | RNVC: 2
9240-032: RNCC: D | RNVC: 9

7 Feb 1990

3040-01-289-5396
Extension Shaft

012895396
8508354: RNCC: 3 | RNVC: 2

25 Nov 1988

3040-01-322-4663
Nonrotating Shaft Eye Bracket

013224663
1550726: RNCC: 3 | RNVC: 2
121-5492: RNCC: 5 | RNVC: 9
8N8017: RNCC: 5 | RNVC: 9

6 Jul 1990

3040-01-302-1001
Clamp Ring Assembly

013021001
214-010-473-113: RNCC: 3 | RNVC: 2

9 Jun 1989

3040-01-327-7767
Rigid Connecting Link

013277767
9540M49P02: RNCC: 3 | RNVC: 2
9540M49: RNCC: D | RNVC: 9

21 Oct 1990

3040-01-333-8269
Mechanical Drive Housing

013338269
8555-121: RNCC: 3 | RNVC: 2

9 Feb 1991

3040-01-297-0047
Shouldered Shaft

012970047
100428: RNCC: 3 | RNVC: 9

27 Mar 1989

3040-01-300-3950
Control Cam

013003950
99118-G001: RNCC: 3 | RNVC: 2
A-0131 ITEM 2: RNCC: 5 | RNVC: 9

14 May 1989

3040-01-327-2919
Nonaircraft Mechanical Actuator

013272919
SK-2129 250-20: RNCC: 3 | RNVC: 2

11 Oct 1990

3040-01-290-9234
Straight Shaft

012909234
3280-L-6720: RNCC: 3 | RNVC: 2
3280-L-6720: RNCC: 5 | RNVC: 2
3280-L-6720: RNCC: 5 | RNVC: 2

19 Dec 1988

3040-01-302-7634
Linear Actuating Cylinder Piston Rod

013027634
TX82C5CA40A0462: RNCC: 3 | RNVC: 2
TE25CACD3AA01000 ITEM 14: RNCC: 5 | RNVC: 9
TE82C5DA40A0462: RNCC: 5 | RNVC: 9
TE82DCA40A010: RNCC: 5 | RNVC: 9

19 Jun 1989

3040-01-324-9201
Actuating Linear Cylinder Assembly Lock Bar

013249201
375 2003 699: RNCC: 3 | RNVC: 2
E2004-94: RNCC: 5 | RNVC: 2
377 9121 001: RNCC: D | RNVC: 9

24 Aug 1990

3040-01-317-7479
Shouldered Shaft

013177479
5750307-001: RNCC: 3 | RNVC: 2
245-5750307: RNCC: D | RNVC: 9

4 Apr 1990

3040-01-327-7766
Rigid Connecting Link

013277766
9540M49P01: RNCC: 3 | RNVC: 2
9540M49: RNCC: D | RNVC: 9

21 Oct 1990

3040-01-268-5379
Spur Gearshaft

012685379
2536-5-61: RNCC: 3 | RNVC: 2
1S-2536-5 PIECE 61: RNCC: 5 | RNVC: 2

2 Dec 1987

3040-01-286-3248
Shouldered Shaft

012863248
079C0075F084A: RNCC: 3 | RNVC: 2

30 Sep 1988

3040-01-279-3286
Rotating Shaft Eye Bracket

012793286
0323158: RNCC: 3 | RNVC: 2
0323158: RNCC: 3 | RNVC: 9
323158: RNCC: 5 | RNVC: 2
323158: RNCC: 5 | RNVC: 9
323158: RNCC: 5 | RNVC: 9
323158: RNCC: 5 | RNVC: 9
323158: RNCC: 5 | RNVC: 9
0323158: RNCC: 5 | RNVC: 9
0323158: RNCC: 5 | RNVC: 9

16 May 1988

3040-01-287-0445
Shouldered Shaft

012870445
3233-4026-0: RNCC: 3 | RNVC: 2
2CR447: RNCC: 5 | RNVC: 2
01252520: RNCC: 5 | RNVC: 9
2CR447: RNCC: 5 | RNVC: 9
0125252X1F: RNCC: D | RNVC: 9

13 Oct 1988

3040-01-272-7607
Straight Shaft

012727607
164-218-320-777-000: RNCC: 3 | RNVC: 2

13 Feb 1988

3040-01-265-8606
Rigid Connecting Link

012658606
A83339-1: RNCC: 3 | RNVC: 2
A83339-1: RNCC: 5 | RNVC: 9

17 Oct 1987

3040-01-255-1604
Bell Crank

012551604
209-064-720-101: RNCC: 3 | RNVC: 2
209-064-720: RNCC: D | RNVC: 9

15 May 1987

3040-01-226-5440
Rigid Connecting Link

012265440
107C2607-4: RNCC: 3 | RNVC: 2

19 Feb 1986

3040-01-242-3015
Manual Control Lever

012423015
128B11400-1: RNCC: 3 | RNVC: 2
128B11400-1: RNCC: 5 | RNVC: 9

9 Oct 1986

3040-01-221-3217
Brake Drum

012213217
11514: RNCC: 3 | RNVC: 2
2CD541: RNCC: 5 | RNVC: 2
2CD541: RNCC: 5 | RNVC: 9
11514: RNCC: 5 | RNVC: 9

27 Nov 1985

3040-01-246-6014
Shouldered Shaft

012466014
808592-1: RNCC: 3 | RNVC: 2
808592-1: RNCC: 5 | RNVC: 2

16 Dec 1986

3040-01-234-8029
Linear Actuating Cylinder Assembly

012348029
2 1/2CGP-2HLTS34CX35 3/4: RNCC: 3 | RNVC: 9
GG094613-A0: RNCC: 5 | RNVC: 2

19 Jun 1986

3040-01-254-4914
Piston Ring

012544914
A50411MRK: RNCC: 3 | RNVC: 2

5 May 1987

3040-01-250-8621
Linear Actuating Cylinder Assembly

012508621
N5DCM-2.5X17-N12XS-FN-1-1-X: RNCC: 3 | RNVC: 2
5029219-060-101: RNCC: 3 | RNVC: 2
Q-2-176: RNCC: 5 | RNVC: 9
5029219-060: RNCC: 7 | RNVC: 1

7 Mar 1987

3040-01-218-4398
Rigid Connecting Link

012184398
128LM10034-601: RNCC: 3 | RNVC: 2
128LM10034-601: RNCC: 5 | RNVC: 9

11 Oct 1985

3040-01-234-1888
Linear Actuating Cylinder Assembly

012341888
60244-41053: RNCC: 3 | RNVC: 2

10 Jun 1986

3040-01-226-6582
Shouldered Shaft

012266582
100673-1: RNCC: 3 | RNVC: 2
100673-1: RNCC: 5 | RNVC: 2
100673: RNCC: 5 | RNVC: 9

21 Feb 1986

3040-01-225-3656
Disk Brake Shoe

012253656
2B1-196: RNCC: 3 | RNVC: 2

1 Feb 1986

3040-01-223-8794
Rigid Connecting Link

012238794
12313757: RNCC: 3 | RNVC: 2
12313757: RNCC: 5 | RNVC: 2
12313757: RNCC: 5 | RNVC: 2

9 Jan 1986

3040-01-219-1678
Rigid Connecting Link

012191678
12350480-1: RNCC: 3 | RNVC: 2
12350610-1: RNCC: 5 | RNVC: 9
12350610-1: RNCC: 5 | RNVC: 9
12350610: RNCC: D | RNVC: 9
12350480: RNCC: D | RNVC: 9

22 Oct 1985

3040-01-191-6245
Mechanical Drive Housing

011916245
162459-100: RNCC: 3 | RNVC: 2
162459REVB: RNCC: C | RNVC: 1

11 Oct 1984

3040-01-200-0924
Spur Gearshaft

012000924
290083: RNCC: 3 | RNVC: 2
290083: RNCC: 5 | RNVC: 2
WLM290083: RNCC: 5 | RNVC: 2
3629160: RNCC: 5 | RNVC: 2
290083: RNCC: 5 | RNVC: 2
9-734-100637: RNCC: 5 | RNVC: 9
290083: RNCC: 5 | RNVC: 9

30 Jan 1985

3040-01-189-6936
Shouldered Shaft

011896936
21170052: RNCC: 3 | RNVC: 2

19 Sep 1984

3040-01-188-8619
Linear Actuating Cylinder Head

011888619
27208: RNCC: 3 | RNVC: 2
895-27665 ITEM 22: RNCC: 5 | RNVC: 2
CB27467-001: RNCC: 5 | RNVC: 2
895-27665: RNCC: D | RNVC: 9

8 Sep 1984

3040-01-179-6140
Ball Joint

011796140
P400267: RNCC: 3 | RNVC: 2
P400267: RNCC: 5 | RNVC: 9

19 May 1984

3040-01-184-4817
Diaphragm Assembly

011844817
13215E6687: RNCC: 3 | RNVC: 2

18 Jul 1984

3040-01-195-0500
Mechanical Drive Housing

011950500
239049: RNCC: 3 | RNVC: 2
239049: RNCC: 5 | RNVC: 9
239049: RNCC: 5 | RNVC: 9
239049: RNCC: 5 | RNVC: 9
239049: RNCC: 5 | RNVC: 9

21 Nov 1984

3040-01-197-4852
Shouldered Shaft

011974852
35593276: RNCC: 3 | RNVC: 2

21 Dec 1984

3040-01-176-2873
Bell Crank

011762873
933340C1: RNCC: 3 | RNVC: 9

10 Apr 1984

3040-01-180-9798
Fuel Rod Collar

011809798
41949: RNCC: 3 | RNVC: 2
041949: RNCC: 5 | RNVC: 9

6 Jun 1984

3040-01-175-3379
Pawl

011753379
2530797: RNCC: 3 | RNVC: 2

30 Mar 1984

3040-01-163-6032
Shouldered Shaft

011636032
2D2-212 ITEM 8: RNCC: 3 | RNVC: 2
2B1-1046: RNCC: 5 | RNVC: 2

5 Oct 1983

3040-01-148-3789
Straight Shaft

011483789
VT-645: RNCC: 3 | RNVC: 2
VT-645: RNCC: 5 | RNVC: 9

4 Mar 1983

3040-01-154-7809
Shouldered Shaft

011547809
10501173: RNCC: 3 | RNVC: 2

31 May 1983

3040-01-161-8616
Bell Crank

011618616
70400-01215-043: RNCC: 3 | RNVC: 2

11 Sep 1983

3040-01-167-9211
Manual Control Lever

011679211
1U4661: RNCC: 3 | RNVC: 2
9J2012: RNCC: 5 | RNVC: 9

8 Dec 1983

3040-01-152-0843
Spur Gearshaft

011520843
380566: RNCC: 3 | RNVC: 2
2AE334: RNCC: 5 | RNVC: 2
2AE334: RNCC: 5 | RNVC: 9

27 Apr 1983

3040-01-144-8031
Shouldered Shaft

011448031
12269927: RNCC: 3 | RNVC: 2

30 Dec 1982

3040-01-156-1063
Turbine Assembly Shaft

011561063
202972-4: RNCC: 3 | RNVC: 2

19 Jun 1983

3040-01-130-5598
Manual Control Lever

011305598
B301916: RNCC: 3 | RNVC: 9

28 Apr 1982

3040-01-124-2815
Rigid Connecting Link

011242815
2783124-101: RNCC: 3 | RNVC: 2
2783124-101: RNCC: 5 | RNVC: 1
2783124-101: RNCC: 5 | RNVC: 9
2783124: RNCC: D | RNVC: 9

30 Dec 1981

3040-01-126-9564
Rigid Connecting Link

011269564
145S2607-4: RNCC: 3 | RNVC: 2

21 Feb 1982

3040-01-137-1840
Friction Lining

011371840
566846800: RNCC: 3 | RNVC: 2
8-004-664-00: RNCC: 5 | RNVC: 9
8-004-664: RNCC: C | RNVC: 1
AMCO D-736: RNCC: C | RNVC: 1

22 Aug 1982

3040-01-121-1567
Shouldered Shaft

011211567
13211E3123-2: RNCC: 3 | RNVC: 2

31 Oct 1981

3040-01-110-2579
Shouldered Shaft

011102579
AS637H3: RNCC: 3 | RNVC: 2

28 Mar 1981

3040-01-109-1763
Linear Actuating Cylinder Piston

011091763
11628136: RNCC: 3 | RNVC: 2
11628136: RNCC: 5 | RNVC: 9

12 Mar 1981

3040-01-128-4266
Rigid Connecting Link

011284266
74J618000-103: RNCC: 3 | RNVC: 2
4700-3: RNCC: 3 | RNVC: 2
SR11573A103: RNCC: 5 | RNVC: 9
SR11573A103: RNCC: 5 | RNVC: 9
10106843: RNCC: 6 | RNVC: 9

20 Mar 1982

3040-01-069-8005
Rigid Connecting Link

010698005
GL502M1: RNCC: 3 | RNVC: 2
ALK5-44: RNCC: 5 | RNVC: 2
128BM10065-1: RNCC: C | RNVC: 1
1128B40302: RNCC: D | RNVC: 9

23 Dec 1978

3040-01-074-8347
Shouldered Shaft

010748347
12267921: RNCC: 3 | RNVC: 2
DAX13198: RNCC: 5 | RNVC: 2

8 Apr 1979

3040-01-059-4297
Bell Crank

010594297
12253192: RNCC: 3 | RNVC: 2
2520010594297: RNCC: 6 | RNVC: 9

12 Apr 1978

3040-01-074-8144
Hydraulic Accumulator Piston

010748144
4687550-0003: RNCC: 3 | RNVC: 2
845-4687550-0003: RNCC: 5 | RNVC: 2
2642-693-03ITEM3: RNCC: 5 | RNVC: 2
4687550-3: RNCC: 5 | RNVC: 2
845-4687550: RNCC: D | RNVC: 9
4687550: RNCC: D | RNVC: 9

7 Apr 1979

3040-01-052-6237
Shouldered Shaft

010526237
362135: RNCC: 3 | RNVC: 2
362135: RNCC: 5 | RNVC: 2

16 Dec 1977

3040-01-074-9652
Spur Gearshaft

010749652
12267239: RNCC: 3 | RNVC: 2
DAX12502: RNCC: 5 | RNVC: 2

11 Apr 1979

3040-01-017-5435
Bell Crank

010175435
212-001-212-5: RNCC: 3 | RNVC: 2
212-001-212-1: RNCC: 5 | RNVC: 9

10 Mar 1976

3040-01-040-1822
Spur Gearshaft

010401822
778-1345-001: RNCC: 3 | RNVC: 2

4 May 1977

3040-01-050-2802
Shouldered Shaft

010502802
12008238: RNCC: 3 | RNVC: 2

3 Nov 1977

3040-01-026-5363
Remote Control Lever

010265363
66-9730-1: RNCC: 3 | RNVC: 2

27 Aug 1976

3040-01-040-6674
Rigid Connecting Link

010406674
2-73391-3: RNCC: 3 | RNVC: 9
2-73391-3: RNCC: 5 | RNVC: 2
2-73391-3: RNCC: C | RNVC: 1

12 May 1977

3040-00-869-1603
Rigid Connecting Link

008691603
4F14015-115A: RNCC: 3 | RNVC: 9
4F14015-115A: RNCC: 5 | RNVC: 9

23 Oct 1967

3040-00-932-9931
Bevel Gearshaft

009329931
SM-C-413988: RNCC: 3 | RNVC: 2
SM-C-413988: RNCC: 5 | RNVC: 9
3040009329931: RNCC: 5 | RNVC: 9

20 Feb 1967

3040-00-937-1843
Push-Pull Control Assembly

009371843
B-4482-15: RNCC: 3 | RNVC: 2
C2282-15: RNCC: 5 | RNVC: 2
C2282-15: RNCC: 5 | RNVC: 9
B2260-15: RNCC: 5 | RNVC: 9
B-4482-15: RNCC: 5 | RNVC: 9

7 May 1972

3040-00-956-5410
Rigid Connecting Link

009565410
32-62119-1: RNCC: 3 | RNVC: 2
32-62119-1: RNCC: 5 | RNVC: 2
32-62119: RNCC: D | RNVC: 9

1 Jan 1962

3040-00-876-8803
Shaft

008768803
H6605-674-1360: RNCC: 3 | RNVC: 2
56232: RNCC: 5 | RNVC: 9
169519: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-872-6309
Friction Lining

008726309
E016053: RNCC: 3 | RNVC: 2
S635C227H02: RNCC: 5 | RNVC: 9
EO16053: RNCC: 5 | RNVC: 9
S635C227H02: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-887-6966
Valve Shaft

008876966
135897-1: RNCC: 3 | RNVC: 2
135897-1: RNCC: 5 | RNVC: 9
135897-1: RNCC: C | RNVC: 1

1 Jan 1962

3040-00-952-7149
Rigid Connecting Link

009527149
205-060-729-23: RNCC: 3 | RNVC: 2
205-060-729-023: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-971-2859
Rigid Connecting Link

009712859
128L10032-1: RNCC: 3 | RNVC: 2
128L10032-1: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-944-5563
Spur Gearshaft

009445563
A4047: RNCC: 3 | RNVC: 2

11 Feb 1966

3040-00-866-8060
Mechanical Drive Housing

008668060
360604: RNCC: 3 | RNVC: 2
360604: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-876-4938
Straight Shaft

008764938
124538: RNCC: 3 | RNVC: 2
456728: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-934-8023
Flexible Shaft Assembly

009348023
038012-3-216D: RNCC: 3 | RNVC: 9
008309-7: RNCC: 5 | RNVC: 2
43C18FT: RNCC: 5 | RNVC: 9
08309: RNCC: 5 | RNVC: 9
B3: RNCC: 5 | RNVC: 9
038012-3-216D: RNCC: C | RNVC: 1

1 Mar 1967

3040-00-920-7357
Rigid Connecting Link

009207357
32-30037-301: RNCC: 3 | RNVC: 2
32-30037-301: RNCC: 5 | RNVC: 2
32-30037-1: RNCC: 5 | RNVC: 9
32-30037: RNCC: D | RNVC: 9

1 Jan 1960

3040-00-948-7043
Turbine Engine Counter Balance Weight

009487043
541153CL1: RNCC: 3 | RNVC: 2
541153CL1: RNCC: 5 | RNVC: 9

6 Apr 1966

3040-00-853-2703
Spur Gearshaft

008532703
463629: RNCC: 3 | RNVC: 2
463629: RNCC: 5 | RNVC: 2

22 Nov 1966

3040-00-849-5711
Rigid Connecting Link

008495711
4F23660-115C: RNCC: 3 | RNVC: 2
4F23660-115A: RNCC: 5 | RNVC: 9
4F23660-115B: RNCC: 5 | RNVC: 9

22 Sep 1967

3040-00-915-6951
Rigid Connecting Link

009156951
65400-00111-072: RNCC: 3 | RNVC: 2
65400-00111-072: RNCC: 8 | RNVC: 2

31 Oct 1965

3040-00-869-7450
Shouldered Shaft

008697450
3-50841-501: RNCC: 3 | RNVC: 9
3-50841-501: RNCC: C | RNVC: 1

1 Jan 1960

3040-00-996-7553
Linear Actuating Cylinder Assembly

009967553
45-98722: RNCC: 3 | RNVC: 2
4598722: RNCC: 3 | RNVC: 2
45-103100: RNCC: 3 | RNVC: 2
E45-77930-2: RNCC: 5 | RNVC: 2
45-77930: RNCC: 5 | RNVC: 2
841701: RNCC: 5 | RNVC: 2
702-12008: RNCC: 5 | RNVC: 2
702-12008: RNCC: 5 | RNVC: 9
45-98722: RNCC: 5 | RNVC: 9

8 Oct 1965

3040-00-786-3182
Shouldered Shaft

007863182
719065-1: RNCC: 3 | RNVC: 2
719065-1: RNCC: 3 | RNVC: 9

20 Mar 1968

3040-00-757-8278
Brake Disc

007578278
13G110: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-735-5316
Body Hub

007355316
7263712: RNCC: 3 | RNVC: 2

23 Feb 1968

3040-00-765-9862
Shouldered Shaft

007659862
5542102: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-757-8347
Shouldered Shaft

007578347
WB2248: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-552-4931
Spur Gearshaft

005524931
367215-1: RNCC: 3 | RNVC: 2
367215-1: RNCC: 5 | RNVC: 2

22 Oct 1974

3040-00-689-3411
Mechanical Drive Housing

006893411
11636098: RNCC: 3 | RNVC: 2

8 Feb 1971

3040-00-652-2152
Control Cam

006522152
50-3751-14: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-478-2053
Multiple Gears Gearshaft

004782053
66358-301: RNCC: 3 | RNVC: 9
66358-301: RNCC: 5 | RNVC: 9
66358: RNCC: D | RNVC: 9

16 Jun 1971

3040-00-606-4057
Rigid Connecting Link

006064057
206-032-523-1: RNCC: 3 | RNVC: 2

30 Jan 1975

3040-00-677-8797
Body Hub

006778797
156226: RNCC: 3 | RNVC: 2
TP156226: RNCC: 5 | RNVC: 9
156226: RNCC: 5 | RNVC: 9
156226: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-460-4711
Worm Shaft

004604711
T-644: RNCC: 3 | RNVC: 9
2218-675: RNCC: 5 | RNVC: 9

23 Feb 1972

3040-00-479-2744
Linear Actuating Cylinder

004792744
13216E6330: RNCC: 3 | RNVC: 2
P011-22: RNCC: 5 | RNVC: 9

4 Feb 1970

3040-00-700-2087
Rigid Connecting Link

007002087
S6140-62137-002: RNCC: 3 | RNVC: 2
S6140-62137-2: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-722-5123
Linear Actuating Cylinder Assembly

007225123
151D1100: RNCC: 3 | RNVC: 2
2587961: RNCC: 3 | RNVC: 2
2587961: RNCC: 5 | RNVC: 2
151D1100 00994: RNCC: 5 | RNVC: 9
2587961: RNCC: 5 | RNVC: 9
6911-026: RNCC: 5 | RNVC: 9
2587961: RNCC: 7 | RNVC: 2

19 Jul 1971

3040-00-614-6109
Rigid Connecting Link

006146109
364889-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-472-5129
Rigid Connecting Link

004725129
1371-94: RNCC: 3 | RNVC: 2
1371D94: RNCC: 3 | RNVC: 9

2 Jun 1971

3040-00-482-6649
Manual Control Lever

004826649
MB300-239: RNCC: 3 | RNVC: 2

22 Jan 1971

3040-00-630-8207
Hydraulic Accumulator

006308207
A108-200-1A: RNCC: 3 | RNVC: 2
810070: RNCC: 3 | RNVC: 2
M27-03711 PIECE 192: RNCC: 5 | RNVC: 2

7 Mar 1979

3040-00-326-3854
Control Cam

003263854
50-3751-1: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-320-3352
Rigid Connecting Link

003203352
123C10212-1: RNCC: 3 | RNVC: 2
123C10212-1: RNCC: 5 | RNVC: 2
123C10212-1: RNCC: 5 | RNVC: 2
123C10121-1: RNCC: 5 | RNVC: 9
123C10212-1: RNCC: 5 | RNVC: 9

16 Nov 1973

3040-00-349-7884
Speedometer-Tachometer Drive Adapter

003497884
5176050: RNCC: 3 | RNVC: 2
5176050: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-420-5195
Manual Control Lever

004205195
209-070-477-1: RNCC: 3 | RNVC: 2

7 Mar 1969

3040-00-249-6443
Pawl

002496443
11768-198: RNCC: 3 | RNVC: 2

13 Jun 1973

3040-00-287-6590
Spur Gearshaft Assembly

002876590
712147: RNCC: 3 | RNVC: 2
712147: RNCC: 5 | RNVC: 9
712147: RNCC: 5 | RNVC: 9

5 Sep 1973

3040-00-412-4433
Rigid Connecting Link

004124433
123CM13054-501: RNCC: 3 | RNVC: 2
123CM13054-501: RNCC: 5 | RNVC: 9
123CM13054-501: RNCC: C | RNVC: 1

20 Sep 1972

3040-00-238-6761
Bell Crank

002386761
1128CVM40505-2: RNCC: 3 | RNVC: 2
1128CVM40505-2: RNCC: 5 | RNVC: 9

2 Nov 1970

3040-00-349-4196
Shouldered Shaft

003494196
729964: RNCC: 3 | RNVC: 2
729964: RNCC: 5 | RNVC: 2
729964: RNCC: 5 | RNVC: 2
729964: RNCC: 5 | RNVC: 2
729964: RNCC: 5 | RNVC: 2
729964: RNCC: 5 | RNVC: 2

30 Jan 1974

3040-00-323-1421
Brake Disc

003231421
26382-1: RNCC: 3 | RNVC: 2
26382: RNCC: 3 | RNVC: 2
26382-1: RNCC: 5 | RNVC: 2
26382-1: RNCC: 5 | RNVC: 2
26382: RNCC: 5 | RNVC: 9
26382-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-397-3319
Mechanical Drive Housing

003973319
11642079: RNCC: 3 | RNVC: 2
2920003973319: RNCC: 5 | RNVC: 9
2920003973319: RNCC: 6 | RNVC: 9

15 Apr 1974

3040-00-421-5640
Nonrotating Shaft Eye Bracket

004215640
134C829G01: RNCC: 3 | RNVC: 9
134C829G01: RNCC: 5 | RNVC: 2
134C829G01: RNCC: 5 | RNVC: 9

9 Dec 1970

3040-00-135-9035
Manual Control Lever

001359035
10936438: RNCC: 3 | RNVC: 2
2540008086821: RNCC: 6 | RNVC: 9
2540008086821: RNCC: E | RNVC: 8
10913737: RNCC: E | RNVC: 8

10 Jan 1969

3040-00-133-1097
Belt Retaining Pawl

001331097
8448226: RNCC: 3 | RNVC: 2

20 Dec 1968

3040-00-073-4224
Rigid Connecting Link

000734224
107C2551-13: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-004-4733
Body Hub

000044733
199438: RNCC: 3 | RNVC: 2
199438: RNCC: 5 | RNVC: 2
199438: RNCC: 5 | RNVC: 9
199438: RNCC: 5 | RNVC: 9

7 Jun 1972

3040-00-014-1816
Control Cam

000141816
58612: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-004-3804
Bell Crank

000043804
2483484: RNCC: 3 | RNVC: 2
2483484: RNCC: 5 | RNVC: 2

7 Jun 1972

3040-00-065-2319
Spur Gearshaft

000652319
492148: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-102-6236
Straight Shaft

001026236
224859: RNCC: 3 | RNVC: 2

3 Dec 1973

3040-00-614-6949
Bell Crank

006146949
11671039: RNCC: 3 | RNVC: 2

12 Feb 1975

3040-00-317-3197
Rigid Connecting Link

003173197
4501-203: RNCC: 3 | RNVC: 2
4040-1: RNCC: 5 | RNVC: 9
4040-1: RNCC: 5 | RNVC: 9
68B418000-203: RNCC: 7 | RNVC: 2

11 Nov 1973

3040-00-130-5997
Spur Gearshaft

001305997
531919-1: RNCC: 3 | RNVC: 2

6 Dec 1968

3040-01-163-7316
Manual Control Lever

011637316
14045658: RNCC: 3 | RNVC: 9
14045658: RNCC: 5 | RNVC: 9

6 Oct 1983

3040-01-663-2918
Housing Adapter

016632918
15552: RNCC: 3 | RNVC: 2

4 May 2017

3040-01-669-0874
Linear Actuating Cylinder Assembly

016690874
4965-MCT: RNCC: 3 | RNVC: 2

20 Dec 2017

3040-01-686-5191
Nonaircraft Mechanical Actuator

016865191
210679-01E: RNCC: 3 | RNVC: 2

20 Feb 2020

3040-01-690-9502
Shouldered Shaft

016909502
014-1630-005C202: RNCC: 3 | RNVC: 2
999-4213-F-10 REV 2 ITEM NO 14: RNCC: 5 | RNVC: 2

11 Sep 2020

3040-01-696-3335
Piston Ring

016963335
E11.03456-1312: RNCC: 3 | RNVC: 2

22 Jul 2021

3040-01-628-8417
Housing Adapter

016288417
633257-00SV: RNCC: 3 | RNVC: 2

11 Jun 2014

3040-01-641-9479
Rigid Connecting Link

016419479
167-8278268 ITEM 22: RNCC: 3 | RNVC: 2
167-8278267 ITEM 11: RNCC: 5 | RNVC: 2
167-8278267: RNCC: D | RNVC: 9
167-8278268: RNCC: D | RNVC: 9

6 Feb 2015

3040-01-621-3724
Shouldered Shaft

016213724
15-8025-04086: RNCC: 3 | RNVC: 2
7000-1319: RNCC: D | RNVC: 9

4 Sep 2013

3040-01-617-0665
Mechanical Drive Housing

016170665
5717171: RNCC: 3 | RNVC: 2

8 Mar 2013

3040-01-651-9841
Shouldered Shaft

016519841
DBA008: RNCC: 3 | RNVC: 2

5 Feb 2016

3040-01-624-9872
Housing Adapter

016249872
040-00241-SA-625: RNCC: 3 | RNVC: 2

21 Jan 2014

3040-01-604-5021
Mechanical Drive Housing

016045021
9T-1495: RNCC: 3 | RNVC: 2

6 Apr 2012

3040-01-632-9430
Linear Actuating Cylinder Assembly

016329430
109537: RNCC: 3 | RNVC: 2

4 Nov 2014

3040-01-650-9760
Controllable Swashplate

016509760
K724418-003: RNCC: 3 | RNVC: 2

23 Dec 2015

3040-01-650-2911
Linear Actuating Cylinder Assembly

016502911
333/E3510: RNCC: 3 | RNVC: 2
333/E3510: RNCC: 5 | RNVC: 2

25 Nov 2015

3040-01-555-3491
Rigid Connecting Link

015553491
2782545: RNCC: 3 | RNVC: 2

4 Sep 2007

3040-01-559-5382
Rigid Connecting Link

015595382
2782552: RNCC: 3 | RNVC: 2

20 Dec 2007

3040-01-581-7351
Gearbox Parts Kit

015817351
280-2363: RNCC: 3 | RNVC: 2

27 Jan 2010

3040-01-549-6276
Linear Actuating Cylinder Assembly

015496276
141157B: RNCC: 3 | RNVC: 2
F053128: RNCC: 5 | RNVC: 2

27 Mar 2007

3040-01-580-3949
Remote Control Lever

015803949
1882892: RNCC: 3 | RNVC: 2

14 Dec 2009

3040-01-581-6202
Linear Actuating Cylinder Assembly

015816202
278-9474: RNCC: 3 | RNVC: 2

22 Jan 2010

3040-01-569-2097
Rod Linkage

015692097
73-00333-00: RNCC: 3 | RNVC: 2

21 Nov 2008

3040-01-596-7136
Nonaircraft Mechanical Actuator

015967136
TAC05-1D20: RNCC: 3 | RNVC: 1
TAC05-1D20-4: RNCC: 3 | RNVC: 2

23 May 2011

3040-01-554-1329
Linear Actuating Cylinder Assembly

015541329
109-4734: RNCC: 3 | RNVC: 2

31 Jul 2007

3040-01-571-0177
Straight Shaft

015710177
123-8180878 ITEM 12: RNCC: 3 | RNVC: 2
211066796A: RNCC: 5 | RNVC: 2

22 Jan 2009

3040-01-585-2569
Mechanical Drive Housing

015852569
1601435: RNCC: 3 | RNVC: 2

20 May 2010

3040-01-589-2063
Linear Actuating Cylinder Assembly

015892063
FIN12280307: RNCC: 3 | RNVC: 2
12475393: RNCC: 7 | RNVC: 2

20 Oct 2010

3040-01-577-9986
Body Hub

015779986
2167431: RNCC: 3 | RNVC: 2

23 Sep 2009

3040-01-597-5281
Nonrotating Shaft Eye Bracket

015975281
AV2090263: RNCC: 3 | RNVC: 2

13 Jun 2011

3040-01-565-5745
Hydraulic Accumulator Cylinder

015655745
GG731656A: RNCC: 3 | RNVC: 2

30 Jul 2008

3040-01-603-5430
Counterbalance Weight

016035430
2044332: RNCC: 3 | RNVC: 2

6 Mar 2012

3040-01-554-2215
Linear Actuating Cylinder Head

015542215
203-0927: RNCC: 3 | RNVC: 2

2 Aug 2007

3040-01-579-3706
Shouldered Shaft

015793706
N5108C1: RNCC: 3 | RNVC: 2

9 Nov 2009

3040-01-579-6670
Control Cam

015796670
3260864: RNCC: 3 | RNVC: 2

19 Nov 2009

3040-01-598-5436
Rigid Connecting Link

015985436
A-3102-X-3456: RNCC: 3 | RNVC: 2

10 Aug 2011

3040-01-549-2405
Worm Shaft

015492405
47705-151-000: RNCC: 3 | RNVC: 2
47705-145-000: RNCC: 5 | RNVC: 9
40201 PL FN5: RNCC: 5 | RNVC: 9

15 Mar 2007

3040-01-566-6929
Rigid Connecting Link

015666929
304-1043: RNCC: 3 | RNVC: 2

8 Sep 2008

3040-01-569-2030
Linear Actuating Cylinder Assembly

015692030
604-9007: RNCC: 3 | RNVC: 2
2332624: RNCC: 5 | RNVC: 9
262-7049: RNCC: 5 | RNVC: 9
2912681: RNCC: 5 | RNVC: 9

21 Nov 2008

3040-01-557-4758
Rigid Connecting Link

015574758
1561543: RNCC: 3 | RNVC: 2

24 Oct 2007

3040-01-560-4959
Rigid Connecting Link

015604959
12473250: RNCC: 3 | RNVC: 2

1 Feb 2008

3040-01-600-3784
Rigid Connecting Link

016003784
3629348: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-01-522-6003
Linear Actuating Cylinder Assembly Parts Kit

015226003
01510-7-4D: RNCC: 3 | RNVC: 2

5 Aug 2004

3040-01-524-9781
Inertia Damper

015249781
JE140316X24S6L: RNCC: 3 | RNVC: 2
JE-1403 ASSEMBLY 5: RNCC: 5 | RNVC: 2

25 Oct 2004

3040-01-529-3938
Shouldered Shaft

015293938
1914522: RNCC: 3 | RNVC: 2

14 Apr 2005

3040-01-548-1327
Shaft Collar

015481327
432524-02: RNCC: 3 | RNVC: 9
432524-02: RNCC: 5 | RNVC: 2
432524-02: RNCC: 5 | RNVC: 2

9 Feb 2007

3040-01-522-4830
Linear Actuating Cylinder Piston Rod

015224830
P12619078: RNCC: 3 | RNVC: 2
P12619078: RNCC: 3 | RNVC: 9
P018583: RNCC: 5 | RNVC: 9

31 Jul 2004

3040-01-526-0458
Ball Joint

015260458
CA37701P: RNCC: 3 | RNVC: 2
CA37701P: RNCC: 5 | RNVC: 2

6 Dec 2004

3040-01-530-5106
Shouldered Shaft

015305106
1912293: RNCC: 3 | RNVC: 2

1 Jun 2005

3040-01-548-5894
Linear Actuating Cylinder Assembly

015485894
189-4647: RNCC: 3 | RNVC: 2

27 Feb 2007

3040-01-522-6775
Straight Shaft

015226775
6703/3-999-000: RNCC: 3 | RNVC: 2
12220 REV A: RNCC: 5 | RNVC: 1
12220 PL REV A PN 3: RNCC: 5 | RNVC: 1
6703/3-442-000: RNCC: 5 | RNVC: 9

9 Aug 2004

3040-01-529-3975
Control Cam

015293975
0813518: RNCC: 3 | RNVC: 2

14 Apr 2005

3040-01-546-4146
A Rw Trans Fld Fill

015464146
061477-100: RNCC: 3 | RNVC: 2

14 Dec 2006

3040-01-532-3182
Linear Actuating Cylinder Piston Rod

015323182
2190935: RNCC: 3 | RNVC: 2

4 Aug 2005

3040-01-517-2921
Shouldered Shaft

015172921
9U-6869: RNCC: 3 | RNVC: 2

4 Feb 2004

3040-01-517-6224
Straight Shaft

015176224
6736612: RNCC: 3 | RNVC: 2
6736612: RNCC: 5 | RNVC: 2

17 Feb 2004

3040-01-497-2751
Shouldered Shaft

014972751
6935021: RNCC: 3 | RNVC: 2

15 May 2002

3040-01-538-9084
Linear Actuating Cylinder Assembly

015389084
1643763: RNCC: 3 | RNVC: 2
4HB764: RNCC: 5 | RNVC: 2
404767: RNCC: 5 | RNVC: 9

4 Apr 2006

3040-01-504-7772
Rigid Connecting Link

015047772
300-30133-01: RNCC: 3 | RNVC: 2
0-001-110-01 FIND NO 76: RNCC: 5 | RNVC: 2
0-101-320-02: RNCC: 5 | RNVC: 9
0-101-320-02: RNCC: 5 | RNVC: 9
0-001-110-01: RNCC: D | RNVC: 9

10 Feb 2003

3040-01-523-3653
Linear Actuating Cylinder Assembly

015233653
C-18657: RNCC: 3 | RNVC: 2

31 Aug 2004

3040-01-525-8068
Control Cam

015258068
2330214: RNCC: 3 | RNVC: 2

24 Nov 2004

3040-01-532-6093
Linear Actuating Cylinder Assembly

015326093
1200084: RNCC: 3 | RNVC: 2
540-066/100: RNCC: 3 | RNVC: 9
540-066/400: RNCC: 5 | RNVC: 2
540-066/400: RNCC: 5 | RNVC: 9
9511-016: RNCC: 5 | RNVC: 9
540-066/800: RNCC: 5 | RNVC: 9

15 Aug 2005

3040-01-500-6452
Shaft Retaining Plate

015006452
12443627: RNCC: 3 | RNVC: 2

5 Sep 2002

3040-01-526-5026
Flexible Shaft Assembly

015265026
65042-110FT0IN: RNCC: 3 | RNVC: 2
P-2366 FN 9: RNCC: 5 | RNVC: 2

20 Dec 2004

3040-01-528-2949
Brake Disc

015282949
1-082-652-00-014: RNCC: 3 | RNVC: 2

9 Mar 2005

3040-01-512-9959
Body Hub

015129959
12220-025-000: RNCC: 3 | RNVC: 2
12270 PL FIND NO. 1: RNCC: 5 | RNVC: 2

16 Sep 2003

3040-01-457-3059
Remote Control Lever

014573059
7W-0633: RNCC: 3 | RNVC: 2
4P-7028 IT 26: RNCC: 5 | RNVC: 2

18 Jul 1998

3040-01-487-0002
Remote Control Lever

014870002
064-48863-000: RNCC: 3 | RNVC: 2
364-49724-000 ITEM 84: RNCC: 5 | RNVC: 2
064-48863C000: RNCC: 5 | RNVC: 2

20 Jul 2001

3040-01-483-9450
Straight Shaft

014839450
05-07-011: RNCC: 3 | RNVC: 2

12 Apr 2001

3040-01-457-3073
Remote Control Lever

014573073
4W-3928: RNCC: 3 | RNVC: 2
4P-7028 IT 41: RNCC: 5 | RNVC: 2

18 Jul 1998

3040-01-452-4286
Spur Gearshaft

014524286
4P3111: RNCC: 3 | RNVC: 2
7E2495 IT 7: RNCC: 5 | RNVC: 2

27 Jan 1998

3040-01-460-2707
Piston Rod End

014602707
9383-164-1: RNCC: 3 | RNVC: 2

30 Oct 1998

3040-01-475-5218
Shaft Collar

014755218
124-4322620 PC 8-83: RNCC: 3 | RNVC: 2
4322620: RNCC: D | RNVC: 9

6 Jun 2000

3040-01-491-3918
Straight Shaft

014913918
H643-7003-75: RNCC: 3 | RNVC: 2
342-7067322-75: RNCC: 5 | RNVC: 2
H643-7003: RNCC: D | RNVC: 9
7067322: RNCC: D | RNVC: 9

19 Oct 2001

3040-01-474-2102
Straight Shaft

014742102
115-4116: RNCC: 3 | RNVC: 2

27 Apr 2000

3040-01-490-7264
Manual Control Lever

014907264
190290832: RNCC: 3 | RNVC: 2
100061564 ITEM 34: RNCC: 5 | RNVC: 2
100061564 ITEM 34: RNCC: 5 | RNVC: 9
200290672: RNCC: 5 | RNVC: 9

5 Oct 2001

3040-01-474-2074
Shouldered Shaft

014742074
128-1099: RNCC: 3 | RNVC: 2

27 Apr 2000

3040-01-483-5378
Bell Crank

014835378
288143D00: RNCC: 3 | RNVC: 2
288143D00: RNCC: 3 | RNVC: 9
288143-D: RNCC: 5 | RNVC: 9
3261912: RNCC: D | RNVC: 9

2 Apr 2001

3040-01-488-7673
Rigid Connecting Link

014887673
124-7386936 PC 23: RNCC: 3 | RNVC: 2
124-7386972 PC 69: RNCC: 5 | RNVC: 2
124-7386972: RNCC: D | RNVC: 9
124-7386936: RNCC: D | RNVC: 9

4 Sep 2001

3040-01-459-4034
Linear Actuating Cylinder Assembly Parts Kit

014594034
01510-7-40: RNCC: 3 | RNVC: 2

30 Sep 1998

3040-01-414-9128
Straight Shaft

014149128
4W4458: RNCC: 3 | RNVC: 2

16 Jun 1995

3040-01-440-9319
Manual Control Lever

014409319
2782872: RNCC: 3 | RNVC: 2
2782872: RNCC: 3 | RNVC: 9

29 Jan 1997

3040-01-398-8320
Shouldered Shaft

013988320
7E1306: RNCC: 3 | RNVC: 2

9 Nov 1994

3040-01-399-4192
Shouldered Shaft

013994192
742449: RNCC: 3 | RNVC: 2

24 Nov 1994

3040-01-407-1855
Shuttle

014071855
51C1087-1: RNCC: 3 | RNVC: 2
51C1087-1: RNCC: 3 | RNVC: 9
PF51-013-80: RNCC: 5 | RNVC: 2
PF51-013-80: RNCC: 5 | RNVC: 9

23 Jan 1995

3040-01-350-6308
Shouldered Shaft

013506308
7C1164: RNCC: 3 | RNVC: 2
9Y6918 IT 4: RNCC: 5 | RNVC: 2
9Y6918: RNCC: D | RNVC: 9

19 Dec 1991

3040-01-382-8936
Shouldered Shaft

013828936
218703: RNCC: 3 | RNVC: 2
218703: RNCC: 5 | RNVC: 9

11 Nov 1993

3040-01-345-2918
Friction Lining

013452918
061-000-091 ITEM 23: RNCC: 3 | RNVC: 2
A011936000: RNCC: 5 | RNVC: 2
000011936-000: RNCC: 5 | RNVC: 9
061-000-091: RNCC: D | RNVC: 9

16 Sep 1991

3040-01-369-5240
Linear Actuating Cylinder Assembly Parts Kit

013695240
813458: RNCC: 3 | RNVC: 2

24 Dec 1992

3040-01-353-8534
Manual Control Lever

013538534
7G2084: RNCC: 3 | RNVC: 2

19 Feb 1992

3040-01-351-1676
Rigid Connecting Link

013511676
4F14015-123A: RNCC: 3 | RNVC: 2

1 Jan 1992

3040-01-359-0627
Shouldered Shaft

013590627
830764: RNCC: 3 | RNVC: 2
3040PL0837056: RNCC: 6 | RNVC: 9

28 May 1992

3040-01-360-6396
Linear Actuating Cylinder Assembly

013606396
TBXXEAEA1AATC230: RNCC: 3 | RNVC: 2
8909A277-001: RNCC: 5 | RNVC: 2
8909A277-001: RNCC: 5 | RNVC: 9

28 Jun 1992

3040-01-302-7605
Shouldered Shaft

013027605
9T1262: RNCC: 3 | RNVC: 2

19 Jun 1989

3040-01-313-2160
Shouldered Shaft Assembly

013132160
5L9064: RNCC: 3 | RNVC: 2

4 Jan 1990

3040-01-289-8394
Rigid Connecting Link

012898394
5P0257: RNCC: 3 | RNVC: 2

1 Dec 1988

3040-01-277-0307
Hydraulic Accumulator

012770307
853560: RNCC: 3 | RNVC: 2
A15N5775X10E: RNCC: 5 | RNVC: 2

16 Apr 1988

3040-01-273-0246
Steering Clutch Rod

012730246
9H2941: RNCC: 3 | RNVC: 2

19 Feb 1988

3040-01-270-6468
Pulley Side Plate

012706468
4667049 PART 1: RNCC: 3 | RNVC: 2
4667049: RNCC: D | RNVC: 9

11 Jan 1988

3040-01-289-8301
Shouldered Shaft

012898301
26404: RNCC: 3 | RNVC: 9
9T1257: RNCC: 5 | RNVC: 2

1 Dec 1988

3040-01-281-1447
Shouldered Shaft

012811447
T214282: RNCC: 3 | RNVC: 2
T214282: RNCC: 3 | RNVC: 9

17 Jun 1988

3040-01-276-6965
Shouldered Shaft

012766965
656D0506K041A: RNCC: 3 | RNVC: 2
656D0506: RNCC: C | RNVC: 1

12 Apr 1988

3040-01-280-8978
Shouldered Shaft

012808978
6T1412: RNCC: 3 | RNVC: 2

14 Jun 1988

3040-01-257-1519
Shouldered Shaft

012571519
87643-6906 ITEM 15: RNCC: 3 | RNVC: 2
522-4675678 ITEM 15: RNCC: 5 | RNVC: 2
87643-6906: RNCC: D | RNVC: 9
522-4675678: RNCC: D | RNVC: 9

12 Jun 1987

3040-01-269-0528
Rigid Connecting Link

012690528
9S6616: RNCC: 3 | RNVC: 2

11 Dec 1987

3040-01-251-1710
Shouldered Shaft

012511710
87692-1816 ITEM 15: RNCC: 3 | RNVC: 2
711-4863675 ITEM 15: RNCC: 5 | RNVC: 2
711-4863675: RNCC: D | RNVC: 9
87692-1816: RNCC: D | RNVC: 9

14 Mar 1987

3040-01-253-4664
Manual Control Lever

012534664
8V3208: RNCC: 3 | RNVC: 2

18 Apr 1987

3040-01-240-6208
Manual Control Lever

012406208
6P9633: RNCC: 3 | RNVC: 2

16 Sep 1986

3040-01-222-6591
Mechanical Drive Housing

012226591
12334217: RNCC: 3 | RNVC: 2
12334217: RNCC: 5 | RNVC: 2
12334217: RNCC: 5 | RNVC: 2
10085878: RNCC: 6 | RNVC: 9

15 Dec 1985

3040-01-226-0403
Push-Pull Control Assembly

012260403
A-2861-11: RNCC: 3 | RNVC: 1
A-2861-11: RNCC: 3 | RNVC: 2
A-2861-NM-11: RNCC: C | RNVC: 1

11 Feb 1986

3040-01-201-2060
Push-Pull Control Assembly

012012060
44232-016: RNCC: 3 | RNVC: 2

14 Feb 1985

3040-01-199-9753
Straight Shaft

011999753
007235-501: RNCC: 3 | RNVC: 2
007235-501: RNCC: 3 | RNVC: 9

29 Jan 1985

3040-01-203-2438
Linear Actuating Cylinder Piston

012032438
390 0240: RNCC: 3 | RNVC: 2
390 2170: RNCC: D | RNVC: 9

13 Mar 1985

3040-01-172-3111
Control Cam

011723111
12316777: RNCC: 3 | RNVC: 2

18 Feb 1984

3040-01-185-4438
Linear Actuating Cylinder Piston

011854438
9J8047: RNCC: 3 | RNVC: 2

29 Jul 1984

3040-01-176-4100
Mechanical Drive Housing

011764100
8N1569: RNCC: 3 | RNVC: 2

11 Apr 1984

3040-01-184-2279
Rigid Connecting Link

011842279
7K0683: RNCC: 3 | RNVC: 2

17 Jul 1984

3040-01-163-7345
Bell Crank

011637345
8P2506: RNCC: 3 | RNVC: 2

6 Oct 1983

3040-01-159-3588
Brake Drum

011593588
8P0203: RNCC: 3 | RNVC: 2
8P203: RNCC: 5 | RNVC: 9

6 Aug 1983

3040-01-161-5080
Manual Control Lever

011615080
3N5755: RNCC: 3 | RNVC: 2

7 Sep 1983

3040-01-161-6486
Straight Shaft

011616486
3N5744: RNCC: 3 | RNVC: 2

8 Sep 1983

3040-01-154-2125
Mechanical Drive Housing

011542125
7G4990: RNCC: 3 | RNVC: 2

21 May 1983

3040-01-155-5778
Shouldered Shaft

011555778
7G8136: RNCC: 3 | RNVC: 2

11 Jun 1983

3040-01-155-0332
Mechanical Drive Housing

011550332
1885050: RNCC: 3 | RNVC: 2
7G8132: RNCC: 5 | RNVC: 9

4 Jun 1983

3040-01-153-2762
Mechanical Drive Housing

011532762
7G8138: RNCC: 3 | RNVC: 2

14 May 1983

3040-01-155-0334
Mechanical Drive Housing

011550334
9G8117: RNCC: 3 | RNVC: 2

4 Jun 1983

3040-01-166-2194
Manual Control Lever

011662194
3536093-801: RNCC: 3 | RNVC: 9
3536093-801: RNCC: 5 | RNVC: 2
472-9402: RNCC: 6 | RNVC: 9

9 Nov 1983

3040-01-134-3406
Shaft Retaining Plate

011343406
12312308: RNCC: 3 | RNVC: 2
12312308: RNCC: D | RNVC: 9

3 Jul 1982

3040-01-052-1072
Shouldered Shaft

010521072
12266194: RNCC: 3 | RNVC: 2

10 Dec 1977

3040-01-067-5556
Straight Shaft

010675556
5S6978: RNCC: 3 | RNVC: 2

3 Nov 1978

3040-01-102-8207
Bell Crank

011028207
12280573: RNCC: 3 | RNVC: 2
3040011028207: RNCC: 6 | RNVC: 9
12280573: RNCC: D | RNVC: 9

29 Oct 1980

3040-01-102-8816
Rigid Connecting Link

011028816
70250-01008-041: RNCC: 3 | RNVC: 2
3040PL1939949: RNCC: 6 | RNVC: 9

30 Oct 1980

3040-01-047-8611
Idler Gear Shaft

010478611
9S7008: RNCC: 3 | RNVC: 2

15 Sep 1977

3040-01-059-0896
Mechanical Drive Housing

010590896
3S0110: RNCC: 3 | RNVC: 2
3S110: RNCC: 5 | RNVC: 2

6 Apr 1978

3040-01-068-6107
Hub

010686107
2P9039: RNCC: 3 | RNVC: 2

30 Nov 1978

3040-01-107-8107
Shouldered Shaft

011078107
3P5476: RNCC: 3 | RNVC: 2

13 Feb 1981

3040-01-073-7674
Rotating Shaft Eye Bracket

010737674
12284909: RNCC: 3 | RNVC: 2
XM62810: RNCC: 5 | RNVC: 9
12274769: RNCC: 5 | RNVC: 9

21 Mar 1979

3040-01-042-2506
Rod

010422506
3-74207-19: RNCC: 3 | RNVC: 2
3-74207-19: RNCC: 3 | RNVC: 9
3-74207-19: RNCC: 5 | RNVC: 9

8 Jun 1977

3040-01-038-6998
Rigid Connecting Link

010386998
2-74164-501: RNCC: 3 | RNVC: 9
2-74164-501: RNCC: C | RNVC: 1
2-74164: RNCC: D | RNVC: 9

10 Apr 1977

3040-00-775-9206
Shouldered Shaft

007759206
484D40: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-795-4384
Eccentric Shaft

007954384
39-14266-1: RNCC: 3 | RNVC: 2
39-14266-1: RNCC: 5 | RNVC: 2
39-14266-1: RNCC: 5 | RNVC: 2
39-14266-1: RNCC: 5 | RNVC: 2
39-14266-1: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-807-9851
Rigid Connecting Link

008079851
830187-1: RNCC: 3 | RNVC: 2
830187-1: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-716-0737
Shouldered Shaft

007160737
117317: RNCC: 3 | RNVC: 2
117317: RNCC: 3 | RNVC: 2
117317: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-388-9923
Rigid Connecting Link

003889923
4501-251: RNCC: 3 | RNVC: 2
4069-1: RNCC: 5 | RNVC: 9
68B418000-251: RNCC: 7 | RNVC: 2

28 Mar 1974

3040-00-363-5726
Straight Shaft

003635726
8028460: RNCC: 3 | RNVC: 2
8028460: RNCC: 3 | RNVC: 9
8028460: RNCC: 5 | RNVC: 9
8075079PC8028460: RNCC: 5 | RNVC: 9
8075093PC8028460: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-236-5165
Bell Crank

002365165
4C52038-102A: RNCC: 3 | RNVC: 2

25 Jun 1969

3040-00-171-1954
Rigid Connecting Link

001711954
65356-04081-043: RNCC: 3 | RNVC: 2

27 Aug 1972

3040-00-015-6675
Shouldered Shaft

000156675
6774423: RNCC: 3 | RNVC: 2
6774423: RNCC: 5 | RNVC: 9
6774423: RNCC: 5 | RNVC: 9
2520000156675: RNCC: 6 | RNVC: 9

1 Jan 1961

3040-01-538-1153
Remote Control Lever

015381153
201324706-01: RNCC: 3 | RNVC: 2
201324706-01: RNCC: 3 | RNVC: 2
7002821-2: RNCC: 5 | RNVC: 2
7002821: RNCC: D | RNVC: 9
201324706: RNCC: D | RNVC: 9

10 Mar 2006

3040-01-530-4818
Manual Control Lever

015304818
68A582003-1005: RNCC: 3 | RNVC: 2
68A582003: RNCC: D | RNVC: 9

31 May 2005

3040-01-491-8342
Linear Actuating Cylinder Assembly

014918342
86475993: RNCC: 3 | RNVC: 2
86475993: RNCC: 5 | RNVC: 1
86475993: RNCC: 5 | RNVC: 2

1 Nov 2001

3040-01-466-1635
Rear Tire Wheel Ass

014661635
HM-13: RNCC: 3 | RNVC: 2

8 Jul 1999

3040-01-370-5524
30 Inch Hook

013705524
1534AS485: RNCC: 3 | RNVC: 2
1534AS485: RNCC: 5 | RNVC: 2
1534AS485: RNCC: 5 | RNVC: 2
1534AS485: RNCC: 5 | RNVC: 2
1534AS485: RNCC: 5 | RNVC: 2
1534AS485: RNCC: 5 | RNVC: 2
1534AS485: RNCC: 5 | RNVC: 2
1534AS485: RNCC: 5 | RNVC: 2
1534AS485: RNCC: 5 | RNVC: 9
10352364: RNCC: 6 | RNVC: 9

24 Jan 1993

3040-01-311-7823
Shouldered Shaft

013117823
152-4183-1: RNCC: 3 | RNVC: 2

5 Dec 1989

3040-01-130-9985
Spur Gearshaft

011309985
6037-0098-01: RNCC: 3 | RNVC: 2
6037-0043-01: RNCC: 5 | RNVC: 9
10106883: RNCC: 6 | RNVC: 9
6037-0043: RNCC: D | RNVC: 9

1 May 1982

3040-01-129-5290
Spur Gearshaft

011295290
6037-0012-01: RNCC: 3 | RNVC: 2
10106869: RNCC: 6 | RNVC: 9
6037-0012: RNCC: D | RNVC: 9

7 Apr 1982

3040-01-123-7407
Spur Gearshaft

011237407
112867-1: RNCC: 3 | RNVC: 2
112867-1: RNCC: 5 | RNVC: 9

16 Dec 1981

3040-01-122-1406
Rigid Connecting Link

011221406
14-73906-3: RNCC: 1 | RNVC: 2
SR10518A501: RNCC: 3 | RNVC: 2
6628-3: RNCC: 3 | RNVC: 2

15 Nov 1981

3040-01-052-6807
Shouldered Shaft

010526807
5003516: RNCC: 3 | RNVC: 2

17 Dec 1977

3040-01-650-5789
Rigid Connecting Link

016505789
12580275: RNCC: 3 | RNVC: 2

10 Dec 2015

3040-01-602-2175
Shouldered Shaft

016022175
7-4884-1: RNCC: 3 | RNVC: 2

27 Jan 2012

3040-01-615-0178
Pocket Assy Weight

016150178
7-5R2430110-101: RNCC: 3 | RNVC: 2

21 Dec 2012

3040-01-617-6520
Straight Shaft

016176520
1786173: RNCC: 3 | RNVC: 2
1786173: RNCC: 5 | RNVC: 2

29 Mar 2013

3040-01-593-3773
Pawl

015933773
SL19361 ITEM 10: RNCC: 3 | RNVC: 2
MANUAL 1B.1197 IT 10: RNCC: 5 | RNVC: 2

6 Apr 2011

3040-01-589-0010
Spline Adapter

015890010
09006A1720: RNCC: 3 | RNVC: 2

14 Oct 2010

3040-01-605-9438
Push-Pull Control Assembly

016059438
KRF3000-TS-42: RNCC: 3 | RNVC: 2

1 May 2012

3040-01-615-1281
Counterbalance Weight

016151281
7-5R2430112-019: RNCC: 3 | RNVC: 2

31 Dec 2012

3040-01-553-7561
Drive Flange

015537561
47057812: RNCC: 3 | RNVC: 2
47057812: RNCC: 5 | RNVC: 9

25 Jul 2007

3040-01-573-7842
Bevel Gear And Shaft Assembly

015737842
41150-ZY6-710: RNCC: 3 | RNVC: 9

5 May 2009

3040-01-564-4501
Rigid Connecting Link

015644501
B-090106X28-CR: RNCC: 3 | RNVC: 2
803-6397268 PC 78 MOD: RNCC: 5 | RNVC: 2
B-090106X28-CR: RNCC: 5 | RNVC: 2
803-6397269 PC 52 MOD: RNCC: 5 | RNVC: 2
B-090106 REV J SH28 MOD PART: RNCC: 5 | RNVC: 9
B-091006X28-CR: RNCC: 5 | RNVC: 9

17 Jun 2008

3040-01-572-8196
Manual Control Lever

015728196
12505999-002: RNCC: 1 | RNVC: 2
MIL-1-16927-L-23: RNCC: 3 | RNVC: 2
12505999: RNCC: D | RNVC: 9

26 Mar 2009

3040-01-583-4892
Nonaircraft Mechanical Actuator

015834892
52936: RNCC: 3 | RNVC: 2
54470 PN/52936: RNCC: 5 | RNVC: 2

26 Mar 2010

3040-01-559-1249
Rigid Connecting Link

015591249
P34680: RNCC: 3 | RNVC: 2
P34680: RNCC: 3 | RNVC: 2
AMBK4-4078: RNCC: 5 | RNVC: 2
P34680: RNCC: 5 | RNVC: 2

6 Dec 2007

3040-01-561-2652
Linear Actuating Cylinder Assembly

015612652
2935712: RNCC: 3 | RNVC: 2
258-2515: RNCC: 5 | RNVC: 9

28 Feb 2008

3040-01-579-0977
Linear Actuating Cylinder Assembly

015790977
1HH00A00252526: RNCC: 3 | RNVC: 2
H025PB201001NCPH33.00: RNCC: 5 | RNVC: 2
2.50BBHHNHT1S14AX33.00.: RNCC: 5 | RNVC: 2
H025PB201001NCSPH33.00: RNCC: 5 | RNVC: 9

30 Oct 2009

3040-01-553-9633
Shouldered Shaft

015539633
47069712: RNCC: 3 | RNVC: 2
47069712: RNCC: 3 | RNVC: 9
47069712: RNCC: 5 | RNVC: 2

27 Jul 2007

3040-01-553-7565
Drive Flange

015537565
47061712: RNCC: 3 | RNVC: 2
47061712: RNCC: 5 | RNVC: 9

25 Jul 2007

3040-01-548-8345
Linear Actuating Cylinder Piston

015488345
1986906C1: RNCC: 3 | RNVC: 2

6 Mar 2007

3040-01-567-7413
Planetary Gears Carrier

015677413
4181206: RNCC: 1 | RNVC: 2
29547412: RNCC: 3 | RNVC: 2
29540997: RNCC: 5 | RNVC: 9

6 Oct 2008

3040-01-579-6919
Rigid Connecting Link

015796919
2-168771H-57-75: RNCC: 3 | RNVC: 2
12537521-1: RNCC: 3 | RNVC: 2
12537521: RNCC: 7 | RNVC: 2

20 Nov 2009

3040-01-566-8260
Linear Actuating Cylinder Assembly

015668260
TV080047: RNCC: 3 | RNVC: 2
1628163: RNCC: 5 | RNVC: 2
TV080047: RNCC: 5 | RNVC: 2
194907: RNCC: 5 | RNVC: 9

11 Sep 2008

3040-01-573-7837
Bevel Gear And Shaft Assembly

015737837
41141-ZY6-710: RNCC: 3 | RNVC: 9

5 May 2009

3040-01-563-4590
Linear Actuating Cylinder Assembly

015634590
09064: RNCC: 3 | RNVC: 2

12 May 2008

3040-01-512-9571
Lever Guide

015129571
9609M13P03: RNCC: 3 | RNVC: 2
9609M13P03: RNCC: 5 | RNVC: 2
9609M13: RNCC: D | RNVC: 9

15 Sep 2003

3040-01-530-4883
Manual Control Lever

015304883
68A582004-1011: RNCC: 3 | RNVC: 2
68A582004: RNCC: D | RNVC: 9

31 May 2005

3040-01-514-5127
Friction Lining

015145127
512321: RNCC: 3 | RNVC: 2
512273 REV C: RNCC: 5 | RNVC: 2

28 Oct 2003

3040-01-518-2554
Rigid Connecting Link

015182554
60-1474-2: RNCC: 3 | RNVC: 2
60-1474: RNCC: D | RNVC: 9

5 Mar 2004

3040-01-520-3548
Rigid Connecting Link

015203548
423R3558-7: RNCC: 3 | RNVC: 2

10 May 2004

3040-01-513-5374
Power Transmission Equipment Brake Band

015135374
2215B205: RNCC: 3 | RNVC: 2
2215B000 REV B ITEM 205: RNCC: 5 | RNVC: 2
PL2215B000 REV A ITEM 205: RNCC: 5 | RNVC: 2

29 Sep 2003

3040-01-516-1654
Nonrotating Shaft Eye Bracket

015161654
L43139G01: RNCC: 3 | RNVC: 2
L43139: RNCC: D | RNVC: 9

22 Dec 2003

3040-01-523-7594
Linear Actuating Cylinder Assembly

015237594
235-9829: RNCC: 3 | RNVC: 2

15 Sep 2004

3040-01-542-4938
Piston Ring

015424938
6673952: RNCC: 3 | RNVC: 2
F038950001: RNCC: 5 | RNVC: 2
F038950001: RNCC: 5 | RNVC: 2
F038950001: RNCC: 5 | RNVC: 2

8 Aug 2006

3040-01-525-7033
Rigid Connecting Link

015257033
30-266: RNCC: 3 | RNVC: 2

20 Nov 2004

3040-01-535-5670
Counterbalance Weight

015355670
660509679: RNCC: 3 | RNVC: 2

5 Dec 2005

3040-01-542-7915
Rigid Connecting Link

015427915
F027853: RNCC: 3 | RNVC: 9

18 Aug 2006

3040-01-521-1627
Shouldered Shaft

015211627
45-881943: RNCC: 3 | RNVC: 2

12 Jun 2004

3040-01-525-5123
Nonaircraft Mechanical Actuator

015255123
1201650: RNCC: 3 | RNVC: 2
1201600: RNCC: 5 | RNVC: 9

12 Nov 2004

3040-01-526-5021
Flexible Shaft Assembly

015265021
65042-126FT0IN: RNCC: 3 | RNVC: 2
P-2366 SH 5, FN 9: RNCC: 5 | RNVC: 2
65042-140FT0IN: RNCC: 5 | RNVC: 9

20 Dec 2004

3040-01-529-4732
Housing Adapter

015294732
20015070-10: RNCC: 3 | RNVC: 2
20015070: RNCC: D | RNVC: 9

19 Apr 2005

3040-01-536-2096
Belt-Chain Tension Adjusting Device

015362096
5333480: RNCC: 3 | RNVC: 2
3973827: RNCC: 5 | RNVC: 9
10317202: RNCC: 6 | RNVC: 9

22 Dec 2005

3040-01-483-3076
Body Hub

014833076
12593112: RNCC: 3 | RNVC: 2

23 Mar 2001

3040-01-493-7319
Control Cam

014937319
8100-1253-0073 PC NO 36: RNCC: 3 | RNVC: 2
8100-1253-0073: RNCC: D | RNVC: 9

16 Jan 2002

3040-01-461-8553
Linear Actuating Cylinder Assembly

014618553
AG189983D0: RNCC: 3 | RNVC: 2
5038015: RNCC: 5 | RNVC: 9
2.00CF/M-2HLTVS23CX82.000: RNCC: 5 | RNVC: 9

7 Jan 1999

3040-01-479-7913
Body Hub

014797913
33617: RNCC: 3 | RNVC: 9

27 Oct 2000

3040-01-501-2781
Body Hub

015012781
35834779: RNCC: 3 | RNVC: 2

27 Sep 2002

3040-01-497-6339
Rigid Connecting Link

014976339
C-106-22: RNCC: 3 | RNVC: 2
803-6397268 PC 101 MOD CRES 316: RNCC: 5 | RNVC: 2
6397268: RNCC: D | RNVC: 9

29 May 2002

3040-01-459-6836
Shaft Collar

014596836
MMS0021-106-300: RNCC: 3 | RNVC: 2
43426-3: RNCC: 5 | RNVC: 2
MMS021-106-300: RNCC: C | RNVC: 1
43426: RNCC: D | RNVC: 9

10 Oct 1998

3040-01-476-9435
Aircraf Transformer

014769435
101994-IE322: RNCC: 3 | RNVC: 2

27 Jul 2000

3040-01-477-7531
Rotary Actuating Cylinder Assembly

014777531
6372004941: RNCC: 3 | RNVC: 2

17 Aug 2000

3040-01-442-4531
Straight Shaft

014424531
12415883: RNCC: 3 | RNVC: 2
12415883: RNCC: 5 | RNVC: 2
12415883: RNCC: 5 | RNVC: 2

14 Mar 1997

3040-01-455-2630
Straight Shaft Assembly

014552630
2741164-2-2: RNCC: 3 | RNVC: 2
74-660056-217: RNCC: 5 | RNVC: 9

27 Apr 1998

3040-01-416-1604
Shouldered Shaft

014161604
5363407: RNCC: 3 | RNVC: 2

13 Jul 1995

3040-01-436-1832
Nonrotating Shaft Eye Bracket

014361832
7409023-1: RNCC: 3 | RNVC: 2
7409023-1: RNCC: 5 | RNVC: 9
7409023: RNCC: D | RNVC: 9

13 Sep 1996

3040-01-453-3311
Multiple Gears Gearshaft

014533311
42315-48: RNCC: 3 | RNVC: 9
42315-48: RNCC: C | RNVC: 1

26 Feb 1998

3040-01-436-7085
Counterbalance Weight

014367085
2196853CLG: RNCC: 3 | RNVC: 2

26 Sep 1996

3040-01-447-1515
Shouldered Shaft

014471515
69-14963-1: RNCC: 3 | RNVC: 2
69-14963-1: RNCC: 5 | RNVC: 9

28 Jul 1997

3040-01-454-3234
Linear Actuating Cylinder Assembly

014543234
AG191420B0: RNCC: 3 | RNVC: 2
1.50CC2HLTVS14CX3.00: RNCC: 5 | RNVC: 9

26 Mar 1998

3040-01-440-5351
Straight Axle

014405351
025061000: RNCC: 3 | RNVC: 2
025061000: RNCC: 3 | RNVC: 9

16 Jan 1997

3040-01-412-6773
Linear Actuating Cylinder Assembly

014126773
9284801: RNCC: 3 | RNVC: 2
9284801: RNCC: 5 | RNVC: 2

26 Apr 1995

3040-01-412-5224
Rigid Connecting Link

014125224
7036-0005: RNCC: 3 | RNVC: 9
7036-0005: RNCC: 5 | RNVC: 2
9999 0039-25: RNCC: 5 | RNVC: 9
9999 0039-25: RNCC: C | RNVC: 1

20 Apr 1995

3040-01-390-7495
Control Cam

013907495
258760 ITEM 26: RNCC: 3 | RNVC: 9
258760 ITEM 26: RNCC: 5 | RNVC: 2
258760 ITEM 26: RNCC: 5 | RNVC: 2
258760 ITEM 26: RNCC: 5 | RNVC: 2
258760 ITEM 26: RNCC: 5 | RNVC: 2
258760 ITEM 26: RNCC: 5 | RNVC: 2

25 May 1994

3040-01-391-3981
Straight Shaft

013913981
803-6397420-31: RNCC: 3 | RNVC: 2
6397420 PIECE 31: RNCC: 5 | RNVC: 2
6397420-31: RNCC: 5 | RNVC: 2
803-6397420 PIECE 31: RNCC: 5 | RNVC: 2
6397420: RNCC: D | RNVC: 9

9 Jun 1994

3040-01-414-4067
Counterbalance Weight

014144067
355794-3: RNCC: 3 | RNVC: 2
355794-3: RNCC: 5 | RNVC: 2
355792-3: RNCC: 5 | RNVC: 9
355794: RNCC: D | RNVC: 9

7 Jun 1995

3040-01-392-2348
Shouldered Shaft

013922348
4073860G1: RNCC: 3 | RNVC: 2
4073860G1: RNCC: 5 | RNVC: 9
4073860: RNCC: D | RNVC: 9

26 Jun 1994

3040-01-394-8151
Remote Control Lever

013948151
24-4597-2: RNCC: 3 | RNVC: 2

16 Aug 1994

3040-01-385-1274
Straight Shaft

013851274
9989-100 PC16.2: RNCC: 3 | RNVC: 2
3573-031: RNCC: 5 | RNVC: 2

4 Jan 1994

3040-01-394-9691
Control Cam

013949691
406-071-110-107: RNCC: 3 | RNVC: 2

18 Aug 1994

3040-01-414-7843
Shaft Collar

014147843
4B998C-01: RNCC: 3 | RNVC: 9
4B998C: RNCC: 5 | RNVC: 9
4B998C-01: RNCC: 5 | RNVC: 9

14 Jun 1995

3040-01-322-9049
Hydraulic Accumulator Piston Rod

013229049
K514745: RNCC: 3 | RNVC: 2
A514745: RNCC: 3 | RNVC: 9

17 Jul 1990

3040-01-338-4524
Linear Actuating Cylinder Piston

013384524
704-6294478-3: RNCC: 3 | RNVC: 9
704-6294478-3: RNCC: 5 | RNVC: 2
704-6294478: RNCC: D | RNVC: 9

4 May 1991

3040-01-379-4424
Rigid Connecting Link

013794424
65861-04161-047: RNCC: 3 | RNVC: 2

31 Aug 1993

3040-01-326-3659
Straight Shaft

013263659
94068-1: RNCC: 3 | RNVC: 2
94068: RNCC: 5 | RNVC: 9

22 Sep 1990

3040-01-352-0043
Linear Actuating Cylinder Piston Rod

013520043
6-768-002527: RNCC: 3 | RNVC: 2
2HG386: RNCC: 5 | RNVC: 2
2HG386: RNCC: 5 | RNVC: 9

17 Jan 1992

3040-01-370-6522
Straight Shaft

013706522
164-218-330-777-010: RNCC: 3 | RNVC: 2
D777-51-094 ITEM 103: RNCC: 5 | RNVC: 2
D777-51-094: RNCC: D | RNVC: 9

28 Jan 1993

3040-01-366-9585
Linear Actuating Cylinder Assembly

013669585
CUS8707C030: RNCC: 3 | RNVC: 9
CYSR 5000 HY84T2B2501400138990: RNCC: 5 | RNVC: 9
89156906: RNCC: 5 | RNVC: 9

4 Nov 1992

3040-01-376-1397
Spur Gearshaft

013761397
42315-67: RNCC: 3 | RNVC: 2
42315-67: RNCC: 5 | RNVC: 9
42315-67: RNCC: 5 | RNVC: 9

27 May 1993

3040-01-327-6066
Detent Plate

013276066
12367369: RNCC: 3 | RNVC: 2

17 Oct 1990

3040-01-332-6110
Remote Control Lever

013326110
8984111-2: RNCC: 3 | RNVC: 2
8984111 FIND NO.3: RNCC: 5 | RNVC: 2
10107034: RNCC: 6 | RNVC: 9
8984111: RNCC: D | RNVC: 9

12 Jan 1991

3040-01-363-3926
Linear Actuating Cylinder Assembly

013633926
CYSR5000HY84T2B-200-1000-100-990: RNCC: 3 | RNVC: 9
89156904: RNCC: 5 | RNVC: 9
CYSR5000HY84T2B: RNCC: C | RNVC: 1

29 Aug 1992

3040-01-365-2941
Linear Actuating Cylinder Assembly Parts Kit

013652941
1124774C91: RNCC: 3 | RNVC: 9
1124774C93: RNCC: 5 | RNVC: 2
1124774C91: RNCC: 5 | RNVC: 2
1124774C93: RNCC: 5 | RNVC: 9
1124774C93: RNCC: 5 | RNVC: 9

5 Oct 1992

3040-01-339-9847
Linear Actuating Cylinder

013399847
HC5370: RNCC: 3 | RNVC: 1
HC5370: RNCC: 5 | RNVC: 1
HC5370-3: RNCC: 5 | RNVC: 2
HC5370VM: RNCC: 5 | RNVC: 2
HC3370VM: RNCC: 5 | RNVC: 9
HC5370: RNCC: 5 | RNVC: 9

5 Jun 1991

3040-01-347-7433
Counterbalance Weight

013477433
717512887-001: RNCC: 3 | RNVC: 2
717512887-001: RNCC: 5 | RNVC: 2

28 Oct 1991

3040-01-377-7874
Gear

013777874
83643-2: RNCC: 3 | RNVC: 2
83640 ITEM 24: RNCC: 5 | RNVC: 9
P3643-2: RNCC: C | RNVC: 1
83643: RNCC: D | RNVC: 9

26 Jul 1993

3040-01-353-7643
Rigid Connecting Link

013537643
8100-1251-0192 PC140: RNCC: 3 | RNVC: 2
8100-1251-0192: RNCC: D | RNVC: 9

15 Feb 1992

3040-01-370-2886
Linear Actuating Cylinder Piston

013702886
6-701-000900: RNCC: 3 | RNVC: 9
6-701-000900: RNCC: 5 | RNVC: 2
6-701-000900: RNCC: 5 | RNVC: 2
6-701-000900: RNCC: 5 | RNVC: 2

17 Jan 1993

3040-01-342-4919
Control Cam

013424919
M240209 FIND 5: RNCC: 3 | RNVC: 2
L220122: RNCC: 5 | RNVC: 2
M240209: RNCC: D | RNVC: 9

25 Jul 1991

3040-01-355-0584
Linear Actuating Cylinder Assembly

013550584
13540008: RNCC: 3 | RNVC: 2

11 Mar 1992

3040-01-371-1214
Linear Actuating Cylinder Assembly

013711214
72438: RNCC: 3 | RNVC: 2

6 Feb 1993

3040-01-332-6925
Shouldered Shaft

013326925
4W7988: RNCC: 3 | RNVC: 2
3-349-048-468-BE: RNCC: 5 | RNVC: 2
7W1282 IT 13: RNCC: 5 | RNVC: 2
3-349-048-463-B: RNCC: C | RNVC: 1

15 Jan 1991

3040-01-368-8300
Detent Plate

013688300
2-195-9-00590: RNCC: 3 | RNVC: 2
2-195-9-00590: RNCC: 5 | RNVC: 2
2-195-9-00590: RNCC: 5 | RNVC: 2

9 Dec 1992

3040-01-377-2844
Nonrotating Shaft Eye Bracket

013772844
5202166-16: RNCC: 3 | RNVC: 2
412-4637517-16: RNCC: C | RNVC: 1
5202166: RNCC: D | RNVC: 9

12 Jul 1993

3040-01-294-7191
Shouldered Shaft

012947191
2B1-00978: RNCC: 3 | RNVC: 2
314064 LINE 21: RNCC: 5 | RNVC: 2
1129622: RNCC: 5 | RNVC: 9
2B1-00978: RNCC: 5 | RNVC: 9

22 Feb 1989

Load More Results