What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 145 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 145 of 300

3040-01-550-8564
Linear Actuating Cylinder Piston

015508564
150-990: RNCC: 3 | RNVC: 9

1 May 2007

3040-01-550-8560
Linear Actuating Cylinder Piston

015508560
150-712: RNCC: 3 | RNVC: 9

1 May 2007

3040-01-550-0734
Linear Actuating Cylinder

015500734
H625A: RNCC: 3 | RNVC: 9

6 Apr 2007

3040-01-549-3682
Linear Actuating Cylinder Assembly

015493682
151-114: RNCC: 3 | RNVC: 9

19 Mar 2007

3040-01-549-3677
Linear Actuating Cylinder Assembly

015493677
151-053: RNCC: 3 | RNVC: 9

19 Mar 2007

3040-01-549-3680
Linear Actuating Cylinder Assembly

015493680
151-035: RNCC: 3 | RNVC: 9

19 Mar 2007

3040-01-549-3675
Linear Actuating Cylinder Assembly

015493675
151-039: RNCC: 3 | RNVC: 9

19 Mar 2007

3040-01-549-3667
Linear Actuating Cylinder Assembly

015493667
152-086: RNCC: 3 | RNVC: 9

19 Mar 2007

3040-01-549-3668
Linear Actuating Cylinder Assembly

015493668
151-193: RNCC: 3 | RNVC: 9

19 Mar 2007

3040-01-549-3655
Linear Actuating Cylinder Assembly

015493655
151-195: RNCC: 3 | RNVC: 9

19 Mar 2007

3040-01-549-3663
Linear Actuating Cylinder Assembly

015493663
151-034: RNCC: 3 | RNVC: 9

19 Mar 2007

3040-01-549-3652
Linear Actuating Cylinder Assembly

015493652
151-041: RNCC: 3 | RNVC: 9

19 Mar 2007

3040-01-549-3661
Linear Actuating Cylinder Assembly

015493661
151-086: RNCC: 3 | RNVC: 9

19 Mar 2007

3040-01-549-3658
Linear Actuating Cylinder Assembly

015493658
151-208: RNCC: 3 | RNVC: 9

19 Mar 2007

3040-01-549-3656
Linear Actuating Cylinder Assembly

015493656
151-037: RNCC: 3 | RNVC: 9

19 Mar 2007

3040-01-549-3646
Linear Actuating Cylinder Assembly

015493646
151-040: RNCC: 3 | RNVC: 9

19 Mar 2007

3040-01-549-3597
Linear Actuating Cylinder Assembly

015493597
151-042: RNCC: 3 | RNVC: 9

19 Mar 2007

3040-01-549-3595
Linear Actuating Cylinder Assembly

015493595
151-065: RNCC: 3 | RNVC: 9

19 Mar 2007

3040-01-549-3589
Linear Actuating Cylinder Assembly

015493589
151-038: RNCC: 3 | RNVC: 9

19 Mar 2007

3040-01-549-3591
Linear Actuating Cylinder Assembly

015493591
151-100: RNCC: 3 | RNVC: 9

19 Mar 2007

3040-01-549-0796
Shouldered Shaft Assembly

015490796
143-184: RNCC: 3 | RNVC: 9

12 Mar 2007

3040-01-549-0795
Shouldered Shaft Assembly

015490795
140-540: RNCC: 3 | RNVC: 9

12 Mar 2007

3040-01-548-9920
Straight Shaft

015489920
145-981: RNCC: 3 | RNVC: 9

8 Mar 2007

3040-01-548-9915
Straight Shaft

015489915
145-980: RNCC: 3 | RNVC: 9

8 Mar 2007

3040-01-548-9893
Shouldered Shaft

015489893
167-139: RNCC: 3 | RNVC: 9

8 Mar 2007

3040-01-548-9892
Shaft Idler

015489892
180-534: RNCC: 3 | RNVC: 9

8 Mar 2007

3040-01-548-9894
Shouldered Shaft

015489894
501-594: RNCC: 3 | RNVC: 9

8 Mar 2007

3040-01-548-9889
Flexible Drive Shaft

015489889
167-137: RNCC: 3 | RNVC: 9

8 Mar 2007

3040-01-548-9872
Rigid Connecting Link

015489872
301-697: RNCC: 3 | RNVC: 9

8 Mar 2007

3040-01-548-9855
Rigid Connecting Link

015489855
308-958: RNCC: 3 | RNVC: 9

8 Mar 2007

3040-01-548-9289
Pivot Shaft Assembly

015489289
145-845: RNCC: 3 | RNVC: 9

7 Mar 2007

3040-01-548-7977
Body Hub

015487977
178-098: RNCC: 3 | RNVC: 9

5 Mar 2007

3040-01-548-6988
Control Pedal

015486988
313-186: RNCC: 3 | RNVC: 9

1 Mar 2007

3040-01-548-6981
Straight Shaft

015486981
165-531: RNCC: 3 | RNVC: 9

1 Mar 2007

3040-01-548-2591
Side Gear

015482591
501-595: RNCC: 3 | RNVC: 9

15 Feb 2007

3040-01-548-2584
Large Gear

015482584
165-100: RNCC: 3 | RNVC: 9

15 Feb 2007

3040-01-548-2588
Spur Gearshaft

015482588
501-596: RNCC: 3 | RNVC: 9

15 Feb 2007

3040-01-548-2585
Spur Gearshaft

015482585
168-003: RNCC: 3 | RNVC: 9

15 Feb 2007

3040-01-548-2028
Bell Crank

015482028
301-732: RNCC: 3 | RNVC: 9

13 Feb 2007

3040-01-548-2004
Ball Joint

015482004
110-318: RNCC: 3 | RNVC: 9

13 Feb 2007

3040-01-548-2003
Straight Axle

015482003
161-136: RNCC: 3 | RNVC: 9

13 Feb 2007

3040-01-548-2002
Straight Axle

015482002
161-135: RNCC: 3 | RNVC: 9

13 Feb 2007

3040-01-548-1972
Straight Axle

015481972
160-164: RNCC: 3 | RNVC: 9

13 Feb 2007

3040-01-548-1963
Straight Axle

015481963
160-165: RNCC: 3 | RNVC: 9

13 Feb 2007

3040-01-545-4643
Nonaircraft Mechanical Actuator

015454643
42001-1: RNCC: 3 | RNVC: 2
22005 ITEM NO 8: RNCC: 5 | RNVC: 2
22005: RNCC: D | RNVC: 9
42001: RNCC: D | RNVC: 9

14 Nov 2006

3040-01-521-7542
Rigid Connecting Link

015217542
7577578-021: RNCC: 3 | RNVC: 2
7577578-021: RNCC: 5 | RNVC: 2

1 Jul 2004

3040-01-519-3790
Mechanical Drive Housing

015193790
7579268-011: RNCC: 3 | RNVC: 2
7579268-011: RNCC: 5 | RNVC: 2
7579268-011: RNCC: 5 | RNVC: 2

15 Apr 2004

3040-01-538-3125
Linear Actuating Cylinder Assembly

015383125
HV284B5B-02.50-26.750-0138N11T-0: RNCC: 3 | RNVC: 2

17 Mar 2006

3040-01-526-4882
Flexible Shaft Assembly

015264882
57535-138: RNCC: 3 | RNVC: 2
57353-138FT0IN: RNCC: 5 | RNVC: 2
57353-138FT0IN: RNCC: 5 | RNVC: 9

20 Dec 2004

3040-01-504-9677
Mechanical Drive Housing Part

015049677
7579592-011: RNCC: 3 | RNVC: 2
7579592-011: RNCC: 5 | RNVC: 2

14 Feb 2003

3040-01-512-5096
Linear Actuating Cylinder Assembly

015125096
D-WK-835-8: RNCC: 3 | RNVC: 2

3 Sep 2003

3040-01-509-0578
Linear Actuating Cylinder Assembly

015090578
25-40551-19: RNCC: 3 | RNVC: 2

10 Jun 2003

3040-01-500-4815
Linear Actuating Cylinder Assembly

015004815
872215: RNCC: 3 | RNVC: 9
872215-9: RNCC: 5 | RNVC: 9
872215: RNCC: C | RNVC: 1

28 Aug 2002

3040-01-482-5741
Linear Actuating Cylinder Assembly

014825741
750SVS-0.50-2: RNCC: 3 | RNVC: 2
750SVS-0.50-2-M24S: RNCC: 5 | RNVC: 9
1797651: RNCC: 5 | RNVC: 9

27 Feb 2001

3040-01-485-7746
Remote Control Lever

014857746
122-5589567 PC 8: RNCC: 3 | RNVC: 2
122-5589566 PC 19: RNCC: 5 | RNVC: 2
5589567: RNCC: D | RNVC: 9

6 Jun 2001

3040-01-474-3808
Electrical-Fluid Pressure Connector Assembly

014743808
7264772-11: RNCC: 3 | RNVC: 2
7264772-11: RNCC: 3 | RNVC: 2
7264772-1: RNCC: 5 | RNVC: 2

3 May 2000

3040-01-473-6300
Straight Shaft Assembly

014736300
1453958: RNCC: 3 | RNVC: 9

12 Apr 2000

3040-01-450-8937
Linear Actuating Cylinder Assembly

014508937
595-6401047-AY99: RNCC: 3 | RNVC: 2
211081586: RNCC: 5 | RNVC: 2
6401047: RNCC: D | RNVC: 9

26 Nov 1997

3040-01-467-9612
Shaft Idler

014679612
FX0213: RNCC: 3 | RNVC: 2
2665: RNCC: 3 | RNVC: 2
2665: RNCC: 5 | RNVC: 2

11 Mar 2009

3040-01-444-0358
Shouldered Shaft Assembly

014440358
125886A: RNCC: 3 | RNVC: 2

25 Apr 1997

3040-01-437-4637
Control Cable Assembly

014374637
971115F: RNCC: 3 | RNVC: 9
KAP-F083494: RNCC: 5 | RNVC: 2
959674 ITEM 4: RNCC: 5 | RNVC: 9
994098 ITEM 2: RNCC: 5 | RNVC: 9
959674 ITEM 4: RNCC: 5 | RNVC: 9
971115F: RNCC: 5 | RNVC: 9
994098 ITEM 2: RNCC: 5 | RNVC: 9
959674: RNCC: D | RNVC: 9
994098: RNCC: D | RNVC: 9

15 Oct 1996

3040-01-462-7021
Linear Actuating Cylinder Assembly

014627021
AG189985E0: RNCC: 3 | RNVC: 2

12 Feb 1999

3040-01-461-8551
Linear Actuating Cylinder Assembly

014618551
AG189987G0: RNCC: 3 | RNVC: 2
5038049: RNCC: 5 | RNVC: 9
3.25CBB-2HLTVS14X8.500: RNCC: 5 | RNVC: 9

7 Jan 1999

3040-01-461-8448
Linear Actuating Cylinder Assembly

014618448
AG189987B0: RNCC: 3 | RNVC: 2
5038031: RNCC: 5 | RNVC: 9
3.25CC-2HLTVS33C X 6.875: RNCC: 5 | RNVC: 9

7 Jan 1999

3040-01-425-6640
Linear Actuating Cylinder Assembly

014256640
EE112842D: RNCC: 3 | RNVC: 2
1 1/2FH2HKTVS13AC77: RNCC: 5 | RNVC: 9

26 Feb 1996

3040-01-425-6642
Linear Actuating Cylinder Assembly

014256642
1 1/2CFH2HKTVS13AC77: RNCC: 3 | RNVC: 1
EE112842C: RNCC: 3 | RNVC: 2

26 Feb 1996

3040-01-425-6644
Linear Actuating Cylinder Assembly

014256644
EE110823E: RNCC: 3 | RNVC: 2
1 1/2CFH2HKTVS13AC77: RNCC: 5 | RNVC: 9

26 Feb 1996

3040-01-424-7582
Linear Actuating Cylinder

014247582
21-10603: RNCC: 3 | RNVC: 2
21-10603: RNCC: 3 | RNVC: 9
589-6953105: RNCC: 5 | RNVC: 9
21-10603: RNCC: C | RNVC: 1
589-6953105: RNCC: C | RNVC: 1

5 Feb 1996

3040-01-423-4330
Linear Actuating Cylinder Assembly

014234330
2 1/2CFH2HKTVS13AC 82: RNCC: 3 | RNVC: 1
EE108352F: RNCC: 3 | RNVC: 2

27 Dec 1995

3040-01-423-4342
Linear Actuating Cylinder Assembly

014234342
EE110828B: RNCC: 3 | RNVC: 2
2 1/2 CFH2HKTVS13AC 82: RNCC: 5 | RNVC: 9

27 Dec 1995

3040-01-423-4337
Linear Actuating Cylinder Assembly

014234337
EE110816E: RNCC: 3 | RNVC: 2
2 1/2CFH2HKTVS13AC 82: RNCC: 5 | RNVC: 9

27 Dec 1995

3040-01-423-4343
Linear Actuating Cylinder Assembly

014234343
2 1/2CFH2HKTVS13AC 82: RNCC: 3 | RNVC: 1
EE110828C: RNCC: 3 | RNVC: 2

27 Dec 1995

3040-01-423-4340
Linear Actuating Cylinder Assembly

014234340
EE110717C: RNCC: 3 | RNVC: 2
1 1/2CFH2HKTVS13AC 77: RNCC: 5 | RNVC: 9

27 Dec 1995

3040-01-423-4341
Linear Actuating Cylinder Assembly

014234341
2 1/2CFH2HKTVS13AC 82: RNCC: 3 | RNVC: 1
EE110740C: RNCC: 3 | RNVC: 2

27 Dec 1995

3040-01-423-4338
Linear Actuating Cylinder Assembly

014234338
2 1/2CFH2HKTVS13AC 82: RNCC: 3 | RNVC: 1
EE110736A: RNCC: 3 | RNVC: 2

27 Dec 1995

3040-01-423-4336
Linear Actuating Cylinder Assembly

014234336
2 1/2CFH2HKTVS13AC 82: RNCC: 3 | RNVC: 1
EE110726B: RNCC: 3 | RNVC: 2

27 Dec 1995

3040-01-423-4335
Linear Actuating Cylinder Assembly

014234335
2 1/2CFH2HKTVS13AC 82: RNCC: 3 | RNVC: 1
EE110725C: RNCC: 3 | RNVC: 2

27 Dec 1995

3040-01-423-4332
Linear Actuating Cylinder Assembly

014234332
2 1/2CFH2HKTVS13AC 82: RNCC: 3 | RNVC: 1
EE1107258: RNCC: 3 | RNVC: 2
EE110725B: RNCC: C | RNVC: 1

27 Dec 1995

3040-01-423-4334
Linear Actuating Cylinder Assembly

014234334
1 1/2CFH2HKTVS13AC 77: RNCC: 3 | RNVC: 1
EE108347C: RNCC: 3 | RNVC: 2

27 Dec 1995

3040-01-423-4333
Linear Actuating Cylinder Assembly

014234333
EE110731D: RNCC: 3 | RNVC: 2
2 1/2CFHTHKTVS13AC 82: RNCC: 5 | RNVC: 9

27 Dec 1995

3040-01-423-2928
Linear Actuating Cylinder Assembly

014232928
EE110730B: RNCC: 3 | RNVC: 2
2CFH2HKTVS14AC 82: RNCC: 5 | RNVC: 9

20 Dec 1995

3040-01-423-2926
Linear Actuating Cylinder Assembly

014232926
2CFH2HKTVS14AC 82: RNCC: 3 | RNVC: 1
EE110734E: RNCC: 3 | RNVC: 2

20 Dec 1995

3040-01-423-2920
Linear Actuating Cylinder Assembly

014232920
2 1/2CFH2HKTVS13AC 82: RNCC: 3 | RNVC: 1
EE108352E: RNCC: 3 | RNVC: 2

20 Dec 1995

3040-01-423-2911
Linear Actuating Cylinder Assembly

014232911
2CFH2HKTVS14AC 82: RNCC: 3 | RNVC: 1
EE110730A: RNCC: 3 | RNVC: 2

20 Dec 1995

3040-01-423-2904
Linear Actuating Cylinder Assembly

014232904
1 1/2CFH2HKTVS13AC-77: RNCC: 3 | RNVC: 1
EE112842H: RNCC: 3 | RNVC: 2

20 Dec 1995

3040-01-423-2902
Linear Actuating Cylinder Assembly

014232902
1 1/2CFH2HKTVS13AC-77: RNCC: 3 | RNVC: 1
EE112842G: RNCC: 3 | RNVC: 2

20 Dec 1995

3040-01-423-2899
Linear Actuating Cylinder Assembly

014232899
1 1/2CFH2HKTVS13AC-77: RNCC: 3 | RNVC: 1
EE112842J: RNCC: 3 | RNVC: 2

20 Dec 1995

3040-01-423-2898
Linear Actuating Cylinder Assembly

014232898
1 1/2CFH2HKTVS13AC-77: RNCC: 3 | RNVC: 1
EE112842E: RNCC: 3 | RNVC: 2

20 Dec 1995

3040-01-423-2901
Linear Actuating Cylinder Assembly

014232901
1 1/2CFH2HKTVS13AC-77: RNCC: 3 | RNVC: 1
EE112842F: RNCC: 3 | RNVC: 2

20 Dec 1995

3040-01-423-2891
Linear Actuating Cylinder Assembly

014232891
1 1/2CFH2HKTVS13AC-82: RNCC: 3 | RNVC: 1
EE114395A: RNCC: 3 | RNVC: 2

20 Dec 1995

3040-01-423-2896
Linear Actuating Cylinder Assembly

014232896
1 1/2CFH2HKTVS13AC-82: RNCC: 3 | RNVC: 1
EE114395B: RNCC: 3 | RNVC: 2

20 Dec 1995

3040-01-423-2894
Linear Actuating Cylinder Assembly

014232894
1 1/2CFH2HKTVS13AC-82: RNCC: 3 | RNVC: 1
EE112841B: RNCC: 3 | RNVC: 2

20 Dec 1995

3040-01-423-2889
Linear Actuating Cylinder Assembly

014232889
1 1/2CFH2HKTVS13AC-82: RNCC: 3 | RNVC: 1
EE110736E: RNCC: 3 | RNVC: 2

20 Dec 1995

3040-01-423-2888
Linear Actuating Cylinder Assembly

014232888
1 1/2CFH2HKTVS13AC-82: RNCC: 3 | RNVC: 1
EE112841A: RNCC: 3 | RNVC: 2

20 Dec 1995

3040-01-423-2886
Linear Actuating Cylinder Assembly

014232886
EE110738E1: RNCC: 3 | RNVC: 2
1 1/2CFH2HKTVS13AC-82: RNCC: 5 | RNVC: 9

20 Dec 1995

3040-01-454-2704
Manual Control Lever

014542704
3059934: RNCC: 3 | RNVC: 2
3059934: RNCC: 5 | RNVC: 9

25 Mar 1998

3040-01-452-0538
Linear Actuating Cylinder Assembly

014520538
1H000014322: RNCC: 3 | RNVC: 2
AG191617C0: RNCC: 3 | RNVC: 9
4.00 CBB-2HLTVS23ACX46.000: RNCC: 5 | RNVC: 9

14 Jan 1998

3040-01-413-6001
Shaft Retaining Plate

014136001
64104: RNCC: 3 | RNVC: 2
64104: RNCC: 5 | RNVC: 2

17 May 1995

3040-01-443-6884
Rigid Connecting Link

014436884
4606-629: RNCC: 3 | RNVC: 2
4606-629D: RNCC: 5 | RNVC: 9

15 Apr 1997

3040-01-395-8845
Friction Lining

013958845
807021: RNCC: 3 | RNVC: 9
500003: RNCC: 5 | RNVC: 9
30157: RNCC: 5 | RNVC: 9

8 Sep 1994

3040-01-439-0029
Pneumatic Actuator Cylinder Housing

014390029
7-5075-03: RNCC: 3 | RNVC: 2
7-5075-03: RNCC: 5 | RNVC: 9

24 Nov 1996

3040-01-378-8398
Rigid Connecting Link

013788398
A62C501-1: RNCC: 3 | RNVC: 2
17B4P1001-1: RNCC: 7 | RNVC: 2

22 Aug 1993

3040-01-366-9446
Rigid Connecting Link

013669446
DAA3255P039-101: RNCC: 3 | RNVC: 2
6822-1: RNCC: 5 | RNVC: 2
DAA3255P039: RNCC: 7 | RNVC: 2

4 Nov 1992

3040-01-365-9154
Shouldered Shaft

013659154
DAA7221G801-141: RNCC: 3 | RNVC: 2

19 Oct 1992

3040-01-359-0685
Linear Actuating Cylinder Assembly

013590685
ELP-B2-2BX6SX1R-SS-EL087: RNCC: 3 | RNVC: 2
50495801: RNCC: 5 | RNVC: 2
ELP-2-2BX6SX1R-SS-ELO87: RNCC: 5 | RNVC: 9

28 May 1992

3040-01-419-7079
Nonaircraft Mechanical Actuator

014197079
15261001-009: RNCC: 3 | RNVC: 2
12561001-009: RNCC: 3 | RNVC: 9
15261001-009: RNCC: 5 | RNVC: 9
1256 ITEM NO 2: RNCC: 5 | RNVC: 9
12561001 ASSY 009: RNCC: 5 | RNVC: 9

28 Sep 1995

3040-01-354-9060
Friction Lining

013549060
MTA4201219-003: RNCC: 3 | RNVC: 2
MTA4201219-003: RNCC: 3 | RNVC: 9

7 Mar 1992

3040-01-347-0834
Shouldered Shaft

013470834
DAA3116A361-007: RNCC: 3 | RNVC: 2

16 Oct 1991

3040-01-339-0482
Linear Actuating Cylinder Piston Rod

013390482
3J6440: RNCC: 3 | RNVC: 2

15 May 1991

3040-01-338-7566
Linear Actuating Cylinder Assembly

013387566
4149495: RNCC: 3 | RNVC: 2
1317806: RNCC: 5 | RNVC: 9
1317806: RNCC: 5 | RNVC: 9
1317805: RNCC: D | RNVC: 9

10 May 1991

3040-01-334-8664
Manual Control Lever

013348664
B-23198: RNCC: 3 | RNVC: 2
B-23198: RNCC: 5 | RNVC: 9

4 Mar 1991

3040-01-334-8661
Shouldered Shaft

013348661
C-21948: RNCC: 3 | RNVC: 2
C-21948: RNCC: 5 | RNVC: 9

4 Mar 1991

3040-01-334-7728
Piston Rod Guide

013347728
5263705: RNCC: 3 | RNVC: 2
5263705: RNCC: 5 | RNVC: 9

27 Feb 1991

3040-01-333-0227
Linear Actuating Cylinder Assembly

013330227
7-372-000304: RNCC: 3 | RNVC: 9
7-372-000304: RNCC: 5 | RNVC: 2

21 Jan 1991

3040-01-324-8554
Body Hub

013248554
2810510: RNCC: 3 | RNVC: 9
500-1: RNCC: 5 | RNVC: 2
009-1: RNCC: 5 | RNVC: 9
500-1: RNCC: 5 | RNVC: 9
104985: RNCC: 5 | RNVC: 9
100-60427: RNCC: D | RNVC: 9

23 Aug 1990

3040-01-319-3950
Shouldered Shaft Assembly

013193950
3167663-2: RNCC: 3 | RNVC: 2

5 May 1990

3040-01-318-4181
Linear Actuating Cylinder Piston

013184181
3600800: RNCC: 3 | RNVC: 9

18 Apr 1990

3040-01-316-2784
Body Hub

013162784
2620263: RNCC: 3 | RNVC: 2
2620263: RNCC: 5 | RNVC: 9

7 Mar 1990

3040-01-397-1234
Shaft Collar

013971234
HSC-0010: RNCC: 3 | RNVC: 2
A03604A ITEM 7: RNCC: 5 | RNVC: 2
A03604A: RNCC: D | RNVC: 9

3 Oct 1994

3040-01-310-0792
Control Cam

013100792
S-3-4-3: RNCC: 3 | RNVC: 2
48070 PIECE 28: RNCC: 5 | RNVC: 2

29 Oct 1989

3040-01-393-5294
Pipe Coupling

013935294
DX-2: RNCC: 3 | RNVC: 9
DX-100-1 ITEM 3: RNCC: 5 | RNVC: 9
171-0144: RNCC: 5 | RNVC: 9

21 Jul 1994

3040-01-393-2804
Brake Backing Plate

013932804
01081-001: RNCC: 3 | RNVC: 9
10081-001: RNCC: 5 | RNVC: 2

18 Jul 1994

3040-01-307-5539
Push-Pull Control Assembly

013075539
N1619-2: RNCC: 3 | RNVC: 2

13 Sep 1989

3040-01-307-2991
Manual Control Lever

013072991
N322A9: RNCC: 3 | RNVC: 2
N322A9: RNCC: 3 | RNVC: 9
N322A PIECE 9: RNCC: 5 | RNVC: 9
N322A: RNCC: D | RNVC: 9

8 Sep 1989

3040-01-306-6165
Body Hub

013066165
414409: RNCC: 3 | RNVC: 2

27 Aug 1989

3040-01-388-4686
Linear Actuating Cylinder Assembly

013884686
5WHP30KA: RNCC: 3 | RNVC: 2
5WHP30KAOU29137-4: RNCC: 5 | RNVC: 9

31 Mar 1994

3040-01-300-1621
Controllable Swashplate

013001621
214-010-500-109: RNCC: 3 | RNVC: 2

11 May 1989

3040-01-387-4026
Shouldered Shaft

013874026
8267729-1: RNCC: 3 | RNVC: 2

4 Mar 1994

3040-01-298-8375
Rigid Connecting Link

012988375
3601600: RNCC: 3 | RNVC: 9

22 Apr 1989

3040-01-385-3784
Shouldered Shaft

013853784
0624266F: RNCC: 3 | RNVC: 2

11 Jan 1994

3040-01-384-8929
Spline Adapter

013848929
0618643B: RNCC: 3 | RNVC: 2
GR2079A-: RNCC: D | RNVC: 9

23 Dec 1993

3040-01-384-1243
Worm Shaft

013841243
HSC-0004-1: RNCC: 3 | RNVC: 2
HSC-0004: RNCC: 5 | RNVC: 2
9004C54 ITEM 0004: RNCC: 5 | RNVC: 2
9004C54 ITEM 0004: RNCC: 5 | RNVC: 9

8 Dec 1993

3040-01-295-7141
Linear Actuating Cylinder Assembly

012957141
A65138: RNCC: 3 | RNVC: 9
5R8012: RNCC: 5 | RNVC: 2

10 Mar 1989

3040-01-295-4923
Linear Actuating Cylinder Piston

012954923
3600700: RNCC: 3 | RNVC: 9

7 Mar 1989

3040-01-295-4004
Ball Joint

012954004
3600081: RNCC: 3 | RNVC: 9

4 Mar 1989

3040-01-295-3696
Linear Actuating Cylinder Piston

012953696
0101717: RNCC: 3 | RNVC: 2
0101717: RNCC: 5 | RNVC: 9
DE-30B: RNCC: 5 | RNVC: 9
DE-30B: RNCC: 5 | RNVC: 9
010717: RNCC: 5 | RNVC: 9
0101717: RNCC: 5 | RNVC: 9
DE-30B: RNCC: 5 | RNVC: 9

4 Mar 1989

3040-01-295-3206
Rigid Connecting Link

012953206
3600502: RNCC: 3 | RNVC: 9

3 Mar 1989

3040-01-295-3203
Linear Actuating Cylinder Head

012953203
3600100: RNCC: 3 | RNVC: 9

3 Mar 1989

3040-01-294-9719
Control Cam

012949719
J54S0010-1: RNCC: 3 | RNVC: 9
J54S0010-1: RNCC: 5 | RNVC: 2
J54S0010: RNCC: D | RNVC: 9

25 Feb 1989

3040-01-294-9117
Linear Actuating Cylinder

012949117
3600401: RNCC: 3 | RNVC: 9

24 Feb 1989

3040-01-293-9321
Shouldered Shaft

012939321
63591-34: RNCC: 3 | RNVC: 9
PL15079 ITEM 45: RNCC: 5 | RNVC: 9
63591: RNCC: D | RNVC: 9

9 Feb 1989

3040-01-291-8230
Brake Disc

012918230
160-765: RNCC: 3 | RNVC: 9
160-765: RNCC: 5 | RNVC: 9

6 Jan 1989

3040-01-289-3594
Shouldered Shaft

012893594
70351-08115-104: RNCC: 3 | RNVC: 2
70351-08115: RNCC: D | RNVC: 9
70351-08115-103: RNCC: E | RNVC: 8

22 Nov 1988

3040-01-287-2437
Rigid Connecting Link

012872437
70400-08151-060: RNCC: 3 | RNVC: 2

19 Oct 1988

3040-01-375-6483
Linear Actuating Cylinder

013756483
610614-8R: RNCC: 3 | RNVC: 2

17 May 1993

3040-01-281-0869
Linear Actuating Cylinder Assembly

012810869
2CFH2HLTVS23CX78: RNCC: 3 | RNVC: 9
GAG161268C: RNCC: D | RNVC: 9

17 Jun 1988

3040-01-279-1437
Body Hub

012791437
P-201 ITEM 915: RNCC: 3 | RNVC: 9
P-201 ITEM 9I5: RNCC: C | RNVC: 1
P-201-IT 915: RNCC: C | RNVC: 1

13 May 1988

3040-01-272-5344
Ball Joint

012725344
9360017: RNCC: 3 | RNVC: 9

10 Feb 1988

3040-01-368-7712
Shaft Retaining Plate

013687712
90-7-1001-1: RNCC: 3 | RNVC: 2

8 Dec 1992

3040-01-362-3045
Linear Actuating Cylinder Assembly

013623045
CYSR4700HY74T2N-150-163-63-990: RNCC: 3 | RNVC: 9
89156902: RNCC: 5 | RNVC: 9

4 Aug 1992

3040-01-358-9559
Mechanically Actuated Spindle

013589559
8446-51: RNCC: 3 | RNVC: 2

23 May 1992

3040-01-358-7734
Rigid Connecting Link

013587734
DAA3116A365-005: RNCC: 3 | RNVC: 2

21 May 1992

3040-01-358-7733
Rigid Connecting Link

013587733
DAA3116A365-003: RNCC: 3 | RNVC: 2

21 May 1992

3040-01-358-7732
Rigid Connecting Link

013587732
DAA3116A365-001: RNCC: 3 | RNVC: 2

21 May 1992

3040-01-252-3704
Straight Shaft

012523704
29983-33: RNCC: 3 | RNVC: 9
14186-2 PIECE 26: RNCC: 5 | RNVC: 9

1 Apr 1987

3040-01-247-5673
Rigid Connecting Link

012475673
4256: RNCC: 3 | RNVC: 2
1398AS208-1: RNCC: 5 | RNVC: 2

8 Jan 1987

3040-01-246-4271
Pump Shaft

012464271
006-01N-005-300: RNCC: 3 | RNVC: 2
D-006-01N-0-05-300: RNCC: 5 | RNVC: 9

13 Dec 1986

3040-01-350-3325
Nonaircraft Mechanical Actuator

013503325
844691-01: RNCC: 3 | RNVC: 1
L-673744-SHT5-ITEM 11: RNCC: 5 | RNVC: 1
844691-01VM: RNCC: 5 | RNVC: 2
L-673744-SHT5-ITEM 11VM: RNCC: 5 | RNVC: 2

13 Dec 1991

3040-01-241-0081
Shaft Retaining Plate

012410081
M816: RNCC: 3 | RNVC: 9

20 Sep 1986

3040-01-347-7422
Shaft Collar

013477422
12548787: RNCC: 3 | RNVC: 2

28 Oct 1991

3040-01-235-1744
Worm Shaft

012351744
11022007: RNCC: 3 | RNVC: 2

26 Jun 1986

3040-01-225-3566
Straight Shaft

012253566
D2838: RNCC: 3 | RNVC: 9

1 Feb 1986

3040-01-224-9934
Control Cam

012249934
1277977: RNCC: 3 | RNVC: 2

25 Jan 1986

3040-01-224-9823
Cam-Gear

012249823
1277972: RNCC: 3 | RNVC: 2

25 Jan 1986

3040-01-216-4324
Linear Actuating Cylinder Assembly

012164324
091-53R2N-325-500-0100-999YA4005: RNCC: 3 | RNVC: 9

11 Sep 1985

3040-01-327-1310
Nonrotating Shaft Eye Bracket

013271310
12370703: RNCC: 3 | RNVC: 2

7 Oct 1990

3040-01-212-9175
Ball Joint

012129175
1945230 PIECE 8: RNCC: 3 | RNVC: 1
1945230 PIECE 8L1: RNCC: 5 | RNVC: 2

19 Jul 1985

3040-01-211-8628
Rigid Connecting Link

012118628
75A124211-1003: RNCC: 3 | RNVC: 2

2 Jul 1985

3040-01-208-2207
Remote Control Lever

012082207
119151: RNCC: 3 | RNVC: 9
117894: RNCC: 5 | RNVC: 9

10 May 1985

3040-01-321-8525
Control Pedal

013218525
DVGB1-1G: RNCC: 3 | RNVC: 2
B1-1: RNCC: 3 | RNVC: 9
BPC5: RNCC: 5 | RNVC: 9

23 Jun 1990

3040-01-199-4944
Rigid Connecting Link

011994944
642AS1417: RNCC: 3 | RNVC: 9
642AS1417: RNCC: 5 | RNVC: 2

22 Jan 1985

3040-01-198-9556
Shouldered Shaft

011989556
016B0815K081A: RNCC: 3 | RNVC: 2
B-1638 PIECE 8: RNCC: 5 | RNVC: 9
016B0815: RNCC: D | RNVC: 9

16 Jan 1985

3040-01-197-7823
Shaft Collar

011977823
318H419: RNCC: 3 | RNVC: 2

27 Dec 1984

3040-01-196-7509
Linear Actuating Cylinder Assembly Parts Kit

011967509
RK2AHL0175: RNCC: 3 | RNVC: 2

14 Dec 1984

3040-01-196-7067
Sliding Shaft

011967067
1164382: RNCC: 3 | RNVC: 2
PL316464PIECE110: RNCC: 5 | RNVC: 2

14 Dec 1984

3040-01-312-5662
Shouldered Shaft

013125662
656C0287G026A: RNCC: 3 | RNVC: 2
LM628 PC 27: RNCC: 5 | RNVC: 9

18 Dec 1989

3040-01-310-6534
Shouldered Shaft

013106534
C102175: RNCC: 3 | RNVC: 2
C102175: RNCC: 5 | RNVC: 9
C102.175: RNCC: C | RNVC: 1

12 Nov 1989

3040-01-309-9568
Shouldered Shaft

013099568
C102174: RNCC: 3 | RNVC: 2
C102174: RNCC: 5 | RNVC: 9
C102.174: RNCC: C | RNVC: 1

26 Oct 1989

3040-01-309-4950
Straight Shaft

013094950
B101652: RNCC: 3 | RNVC: 2
B101.652: RNCC: 5 | RNVC: 9
B101652: RNCC: 5 | RNVC: 9

19 Oct 1989

3040-01-309-3236
Bevel Gearshaft

013093236
70351-48148-101: RNCC: 3 | RNVC: 2

15 Oct 1989

3040-01-187-8876
Shaft

011878876
1209122: RNCC: 3 | RNVC: 2

27 Aug 1984

3040-01-308-1668
Shaft Collar

013081668
D100.990: RNCC: 3 | RNVC: 2
D100.990: RNCC: 5 | RNVC: 9

23 Sep 1989

3040-01-302-2486
Linear Actuating Cylinder Assembly

013022486
150-058: RNCC: 3 | RNVC: 9

10 Jun 1989

3040-01-176-0020
Shouldered Shaft

011760020
3860111-1: RNCC: 3 | RNVC: 2

6 Apr 1984

3040-01-171-2664
Spur Gearshaft

011712664
13079042: RNCC: 3 | RNVC: 2
13079042: RNCC: 5 | RNVC: 9

4 Feb 1984

3040-01-295-3901
Linear Actuating Cylinder Assembly

012953901
476-58163-003: RNCC: 3 | RNVC: 2
476-58163-001: RNCC: 5 | RNVC: 9
024-23775: RNCC: 5 | RNVC: 9
476-58193-001: RNCC: 5 | RNVC: 9

4 Mar 1989

3040-01-169-8113
Drive Shaft

011698113
045D0338: RNCC: 3 | RNVC: 2
PLA-2240 PIECE 49: RNCC: 5 | RNVC: 9

15 Jan 1984

3040-01-165-0846
Worm Wheel Gearshaft

011650846
60-420-0140-1: RNCC: 3 | RNVC: 2

25 Oct 1983

3040-01-289-7447
Linear Actuating Cylinder Assembly Parts Kit

012897447
051-KR015-300: RNCC: 3 | RNVC: 9

29 Nov 1988

3040-01-163-0872
Rigid Connecting Link

011630872
209-001-081-005: RNCC: 3 | RNVC: 2
209-001-081-5: RNCC: 5 | RNVC: 2
209-001-081-5: RNCC: 5 | RNVC: 9
209-001-081: RNCC: D | RNVC: 9

27 Sep 1983

3040-01-161-1203
Rigid Connecting Link

011611203
7-311527035-5: RNCC: 3 | RNVC: 2
7-311527035-5: RNCC: 5 | RNVC: 9

1 Sep 1983

3040-01-159-4858
Rigid Connecting Link

011594858
8764570: RNCC: 3 | RNVC: 2
8764570: RNCC: 3 | RNVC: 2

9 Aug 1983

3040-01-148-2837
Interlock Roller Arm

011482837
8-52-176: RNCC: 3 | RNVC: 9
8-52-176: RNCC: 5 | RNVC: 9

3 Mar 1983

3040-01-146-5289
Rigid Connecting Link

011465289
10949644-1: RNCC: 3 | RNVC: 2
10949644-1: RNCC: 5 | RNVC: 9
10949644-1: RNCC: D | RNVC: 9

2 Feb 1983

3040-01-118-1328
Free Lift Cylinder

011181328
SKS-40142-30: RNCC: 3 | RNVC: 9

27 Aug 1981

3040-01-116-6528
Mechanical Drive Housing

011166528
15A1274: RNCC: 3 | RNVC: 2

1 Aug 1981

3040-01-255-1603
Bell Crank

012551603
209-064-711-101: RNCC: 3 | RNVC: 2
209-064-711: RNCC: D | RNVC: 9

15 May 1987

3040-01-247-9613
Push-Pull Control Assembly

012479613
100-020: RNCC: 3 | RNVC: 9

15 Jan 1987

3040-01-103-1898
Straight Shaft

011031898
2618445P1: RNCC: 3 | RNVC: 2
2618445: RNCC: D | RNVC: 9

10 Nov 1980

3040-01-102-1053
Shouldered Shaft

011021053
1362220G1: RNCC: 3 | RNVC: 9
1362220G1: RNCC: 5 | RNVC: 2

11 Oct 1980

3040-01-100-0772
Shouldered Shaft

011000772
055506: RNCC: 3 | RNVC: 2
933B055506: RNCC: 5 | RNVC: 9

27 Aug 1980

3040-01-097-5400
Straight Shaft

010975400
121-6-3: RNCC: 3 | RNVC: 2
1362004G1: RNCC: 5 | RNVC: 2
1362004G1: RNCC: 5 | RNVC: 9

15 Jul 1980

3040-01-231-9839
Linear Actuating Cylinder

012319839
402833: RNCC: 3 | RNVC: 2

7 May 1986

3040-01-084-4246
Linear Actuating Cylinder Assembly

010844246
3WB232: RNCC: 3 | RNVC: 2
116773: RNCC: 5 | RNVC: 9
3WB232: RNCC: 5 | RNVC: 9
112723: RNCC: D | RNVC: 9

18 Oct 1979

3040-01-084-2243
Rigid Connecting Link

010842243
70400-08151-046: RNCC: 3 | RNVC: 2

13 Oct 1979

3040-01-080-4554
Shaft Collar

010804554
3224101: RNCC: 3 | RNVC: 2
3224027 ITEM 86: RNCC: 5 | RNVC: 2

26 Jul 1979

3040-01-078-1287
Nonrotating Shaft Eye Bracket

010781287
12282029: RNCC: 3 | RNVC: 2

9 Jun 1979

3040-01-222-3260
Hydraulic Accumulator Cylinder

012223260
1H000188653: RNCC: 3 | RNVC: 2
AG111971-C: RNCC: 5 | RNVC: 9

10 Dec 1985

3040-01-213-8189
Latch Pin Shaft

012138189
701-149-728-70: RNCC: 3 | RNVC: 9
701-149728-70: RNCC: 5 | RNVC: 9
701-149728-70: RNCC: C | RNVC: 1

1 Aug 1985

3040-01-051-3869
Linear Actuating Cylinder Assembly

010513869
026-00002-01: RNCC: 3 | RNVC: 2
026-00002-01: RNCC: 5 | RNVC: 9

28 Nov 1977

3040-01-047-3835
Cylinder Hydraulic Kit

010473835
515407-8: RNCC: 1 | RNVC: 2
706-00065-063: RNCC: 3 | RNVC: 9

7 Sep 1977

3040-01-202-7269
Control Cam

012027269
2012A3: RNCC: 3 | RNVC: 2
2012A3: RNCC: 7 | RNVC: 9
2012A3: RNCC: C | RNVC: 1

5 Mar 1985

3040-01-036-4380
Linear Actuating Cylinder Assembly

010364380
C44512A6-600: RNCC: 3 | RNVC: 2
3006649: RNCC: 5 | RNVC: 9

26 Feb 1977

3040-01-193-1756
Shaft Retaining Plate

011931756
6-400-000116: RNCC: 3 | RNVC: 2
2CD629: RNCC: 5 | RNVC: 2
2CD629: RNCC: 5 | RNVC: 9

31 Oct 1984

3040-01-188-7785
Outer Gimbal Motor Shaft

011887785
5187135: RNCC: 3 | RNVC: 2
3040PL0986458: RNCC: 6 | RNVC: 9

7 Sep 1984

3040-01-022-4671
Spur Gearshaft

010224671
14-60115-00: RNCC: 3 | RNVC: 2

29 May 1976

3040-01-022-3271
Linear Actuating Cylinder Assembly

010223271
8J5539: RNCC: 3 | RNVC: 2

27 May 1976

3040-01-020-2659
Spur Gearshaft

010202659
11584: RNCC: 3 | RNVC: 9
11584: RNCC: C | RNVC: 1

27 Apr 1976

3040-01-182-6972
Rigid Connecting Link

011826972
7514-6046: RNCC: 3 | RNVC: 2
SR10784A-6046: RNCC: 5 | RNVC: 2
7014-119: RNCC: 5 | RNVC: 9
LE162-0002-6046: RNCC: 7 | RNVC: 2

27 Jun 1984

3040-01-015-0287
Spur Gearshaft

010150287
42251E21: RNCC: 3 | RNVC: 2

13 Jan 1976

3040-00-998-0318
Thrust Shoe

009980318
S805GN: RNCC: 3 | RNVC: 2
S805GN0461: RNCC: 5 | RNVC: 9
S805GN0463: RNCC: 5 | RNVC: 9

16 Nov 1966

3040-00-993-6099
Spur Gearshaft

009936099
BUWEPSDWG2264870: RNCC: 3 | RNVC: 2
2264870: RNCC: 3 | RNVC: 2

28 Mar 1967

3040-00-986-0912
Spur Gearshaft

009860912
7400195: RNCC: 3 | RNVC: 2
7400195: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-01-161-1212
Spur Gearshaft

011611212
7-211350021-3: RNCC: 3 | RNVC: 2
7-211350021-3: RNCC: 5 | RNVC: 9
7-211350021-3: RNCC: 5 | RNVC: 9
7-211350021-3: RNCC: 5 | RNVC: 9
7-211350021-3: RNCC: 5 | RNVC: 9
7-211350021: RNCC: 5 | RNVC: 9
7-211350021-3: RNCC: 5 | RNVC: 9
7-211350021: RNCC: 5 | RNVC: 9

1 Sep 1983

3040-01-155-3263
Handle Shaft

011553263
13152429: RNCC: 3 | RNVC: 2
13152429: RNCC: 5 | RNVC: 1

8 Jun 1983

3040-00-970-5853
Speedometer-Tachometer Drive Adapter

009705853
1582724: RNCC: 3 | RNVC: 9
1582724: RNCC: 5 | RNVC: 9
1582724: RNCC: C | RNVC: 1

1 Jan 1963

3040-01-149-3749
Shouldered Shaft

011493749
031-90606: RNCC: 3 | RNVC: 2

18 Mar 1983

3040-00-967-3439
Thrust Bearing Shoe

009673439
6-4435-7: RNCC: 3 | RNVC: 2
464435PC7T010: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-954-8073
Linear Actuating Cylinder Assembly

009548073
1119-23: RNCC: 3 | RNVC: 2
308D171P13: RNCC: 5 | RNVC: 2

6 May 1966

3040-00-941-3929
Shouldered Shaft

009413929
SM-B-502629: RNCC: 3 | RNVC: 2
666276-090: RNCC: 5 | RNVC: 2

30 Nov 1965

3040-01-128-2403
Rigid Connecting Link

011282403
SR11393A105: RNCC: 3 | RNVC: 2
6512-5: RNCC: 3 | RNVC: 2
10106837: RNCC: 6 | RNVC: 9
SR11393A: RNCC: D | RNVC: 9

18 Mar 1982

3040-00-937-9867
Shouldered Shaft

009379867
2523844: RNCC: 3 | RNVC: 2

7 May 1972

3040-00-929-3882
Bevel Gearshaft

009293882
7622767: RNCC: 3 | RNVC: 2

2 Sep 1966

3040-00-928-2243
Push-Pull Control Assembly

009282243
13206E0230: RNCC: 3 | RNVC: 2
ERS3830: RNCC: 5 | RNVC: 2

24 Apr 1968

3040-00-919-2889
Shouldered Shaft

009192889
10908646: RNCC: 3 | RNVC: 2
2590009192889: RNCC: 5 | RNVC: 9
2590009192889: RNCC: 6 | RNVC: 9

1 Jan 1960

3040-01-104-1443
Linear Actuating Cylinder Assembly

011041443
RD93: RNCC: 3 | RNVC: 2

28 Nov 1980

3040-00-902-5890
Bearing Lining

009025890
101C245AD1: RNCC: 3 | RNVC: 9

10 Feb 1967

3040-00-900-3721
Idler Shaft

009003721
100050: RNCC: 3 | RNVC: 2
100050: RNCC: 3 | RNVC: 9
LA100050: RNCC: 5 | RNVC: 2
100050: RNCC: 5 | RNVC: 9
LA100050: RNCC: 5 | RNVC: 9
LA100050: RNCC: 5 | RNVC: 9
100050: RNCC: 5 | RNVC: 9
LA100050: RNCC: 5 | RNVC: 9
LA100050: RNCC: 5 | RNVC: 9

6 Feb 1967

3040-01-095-1021
Spur Gearshaft

010951021
12292381: RNCC: 3 | RNVC: 2

21 May 1980

3040-00-895-9147
Remote Control Lever

008959147
8349601: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-891-8546
Thrust Bearing Shoe

008918546
5-4763-1: RNCC: 3 | RNVC: 2
464763PCIT03: RNCC: 5 | RNVC: 2
464763PC1T03: RNCC: 5 | RNVC: 2

20 Jan 1967

3040-00-880-1214
Ball Joint

008801214
G33-1: RNCC: 3 | RNVC: 9

15 Apr 1968

3040-01-073-6164
Linear Actuating Cylinder Piston

010736164
150-PN012-325: RNCC: 3 | RNVC: 9
77264292-1-10: RNCC: 5 | RNVC: 9

18 Mar 1979

3040-00-868-8034
Shaft Collar

008688034
10918096: RNCC: 3 | RNVC: 2
3040008688034: RNCC: 5 | RNVC: 9
3040008688034: RNCC: 6 | RNVC: 9
10918096: RNCC: 8 | RNVC: 1

1 Jan 1960

3040-00-868-7931
Control Cam

008687931
0101707: RNCC: 3 | RNVC: 9
D123-2: RNCC: 5 | RNVC: 9
010-1707: RNCC: 5 | RNVC: 9
CP504: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-858-0078
Thrust Shoe

008580078
010-113: RNCC: 3 | RNVC: 2
110-661-002PC13: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-853-7559
Manual Control Lever

008537559
10949630: RNCC: 3 | RNVC: 2

25 Sep 1967

3040-00-847-3169
Rigid Connecting Link

008473169
51P22: RNCC: 3 | RNVC: 2
3706: RNCC: 5 | RNVC: 9

30 Dec 1966

3040-00-820-6642
Mechanical Drive Housing

008206642
HG200541: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-809-7789
Lateral Fifth Shaft

008097789
11640343: RNCC: 3 | RNVC: 2
2510008097789: RNCC: 5 | RNVC: 9

24 May 1968

3040-00-804-3121
Shoe

008043121
1738530: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-01-013-9233
Control Cam

010139233
752082-1: RNCC: 3 | RNVC: 2
752082-1: RNCC: 5 | RNVC: 2

10 Dec 1975

3040-00-792-8974
Linear Actuating Cylinder Piston

007928974
10892225: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-781-8297
Rigid Connecting Link

007818297
10932873-3: RNCC: 3 | RNVC: 2
3040007818297: RNCC: 5 | RNVC: 9
2520007818297: RNCC: 5 | RNVC: 9

15 Jan 1968

3040-00-976-3639
Straight Shaft

009763639
795452-1: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-769-7805
Rigid Connecting Link

007697805
CV15-910544-7: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-769-7425
Straight Shaft

007697425
640420: RNCC: 3 | RNVC: 2
T90A-35: RNCC: 5 | RNVC: 2
7697425: RNCC: 5 | RNVC: 2
T90A35: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-761-6019
Spur Gearshaft

007616019
7616019: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-760-8266
Spur Gearshaft

007608266
BL721553: RNCC: 3 | RNVC: 9
7608266: RNCC: 5 | RNVC: 2

1 Jan 1960

3040-00-760-3617
Control Cam

007603617
438365-1: RNCC: 3 | RNVC: 2

1 Mar 1968

3040-00-760-3616
Control Cam

007603616
438364-1: RNCC: 3 | RNVC: 2

1 Mar 1968

3040-00-760-3618
Control Cam

007603618
438364-2: RNCC: 3 | RNVC: 2

1 Mar 1968

3040-00-760-0751
Worm Shaft

007600751
7600751: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-758-2297
Linear Actuating Cylinder Piston Rod

007582297
2050210: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-757-9086
Straight Shaft

007579086
1775325: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-946-0576
Depth Detecto Shaft

009460576
1815506: RNCC: 3 | RNVC: 2

4 Mar 1966

3040-00-753-9135
Bell Crank

007539135
7539135: RNCC: 3 | RNVC: 2
913104: RNCC: 5 | RNVC: 9
KC6264: RNCC: 5 | RNVC: 9
840H4: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-752-9235
Remote Control Lever

007529235
7529235: RNCC: 3 | RNVC: 2
841H4: RNCC: 5 | RNVC: 9
KC6262: RNCC: 5 | RNVC: 9
913112: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-752-1382
Remote Control Lever

007521382
RCSK14644-2: RNCC: 3 | RNVC: 2
12448381-4: RNCC: 3 | RNVC: 2
913203: RNCC: 5 | RNVC: 9
2520007521382: RNCC: 5 | RNVC: 9
666T5: RNCC: 5 | RNVC: 9
RCSK14644: RNCC: 5 | RNVC: 9
666T5: RNCC: 5 | RNVC: 9
RCSK14644: RNCC: 7 | RNVC: 2

1 Jan 1963

3040-00-740-9143
Remote Control Lever

007409143
7409143: RNCC: 3 | RNVC: 2
11R434: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-740-9041
Bell Crank

007409041
M2020807: RNCC: 3 | RNVC: 2
D7732-2-1: RNCC: 5 | RNVC: 2
7409041: RNCC: 5 | RNVC: 2
221E17: RNCC: 5 | RNVC: 9
14377: RNCC: 5 | RNVC: 9
915754: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-739-3433
Pump Shaft

007393433
A5218: RNCC: 3 | RNVC: 9
891090P1: RNCC: 5 | RNVC: 9
891090P1: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-737-2823
Remote Control Lever

007372823
642624: RNCC: 3 | RNVC: 2
7372823: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-737-1193
Control Wire Stop

007371193
7371193: RNCC: 3 | RNVC: 2
372438: RNCC: 5 | RNVC: 2
7371193: RNCC: 5 | RNVC: 2
GPW11474: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-735-9096
Linear Actuating Cylinder Piston

007359096
8351625: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-922-1245
Shouldered Shaft

009221245
395073-1: RNCC: 3 | RNVC: 2
395073-1: RNCC: 5 | RNVC: 9

5 May 1972

3040-00-727-6693
Ball Joint

007276693
AN276-6: RNCC: 3 | RNVC: 9
A1726A: RNCC: 5 | RNVC: 9
S16051: RNCC: 5 | RNVC: 9
276-6RH: RNCC: 5 | RNVC: 9
AN276-6: RNCC: 5 | RNVC: 9
AN276-6LH: RNCC: 5 | RNVC: 9
128D5: RNCC: 5 | RNVC: 9
13207E3410FN55: RNCC: 5 | RNVC: 9
AN276-6RH: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-720-1456
Input Shaft

007201456
804792: RNCC: 3 | RNVC: 2
31094: RNCC: 5 | RNVC: 2

9 Feb 1968

3040-00-714-4191
Control Cam

007144191
7144191: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-714-4192
Mechanical Drive Housing

007144192
7144192: RNCC: 3 | RNVC: 2
1015007144192: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-708-8144
Straight Shaft

007088144
10866089: RNCC: 3 | RNVC: 2
29307088144: RNCC: 5 | RNVC: 9
2930007088144: RNCC: 5 | RNVC: 9
3040007088144: RNCC: 5 | RNVC: 9
29307088144: RNCC: 6 | RNVC: 9
3040007088144: RNCC: 6 | RNVC: 9
2930007088144: RNCC: 6 | RNVC: 9
3040PL0895775: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-864-2905
Manual Control Lever

008642905
10943055-2: RNCC: 3 | RNVC: 2
2530008642905: RNCC: 5 | RNVC: 9
2530008642905: RNCC: 6 | RNVC: 9
10943055-2: RNCC: 8 | RNVC: 2
10943055: RNCC: D | RNVC: 9

13 Oct 1967

3040-00-851-3269
Mechanical Drive Housing

008513269
175F504: RNCC: 3 | RNVC: 2
175F504: RNCC: 5 | RNVC: 2

9 Jan 1967

3040-00-843-0844
Rigid Connecting Link

008430844
4F61180-105A: RNCC: 3 | RNVC: 2
4F61180-103A: RNCC: 5 | RNVC: 2

18 Sep 1967

3040-00-840-4637
Rigid Connecting Link

008404637
10936331: RNCC: 3 | RNVC: 2
10936331: RNCC: 5 | RNVC: 9
3040008404637: RNCC: 6 | RNVC: 9

19 Dec 1966

3040-00-692-4578
Extension Shaft

006924578
274221PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-690-5297
Linear Actuating Cylinder Assembly

006905297
P50008: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-816-8289
Differential Spider

008168289
E8429M2: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-678-4246
Multiple Gears Gearshaft

006784246
8725248: RNCC: 3 | RNVC: 2
2815006784246: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-780-5562
Shouldered Shaft

007805562
4F73378-101A: RNCC: 3 | RNVC: 2

15 Mar 1968

3040-00-658-3089
Spur Gearshaft

006583089
755309: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-759-4112
Spur Gearshaft

007594112
4067-26: RNCC: 3 | RNVC: 2
4067-26: RNCC: 3 | RNVC: 9
4067D26: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-621-3672
Flexible Shaft Assembly

006213672
643797: RNCC: 3 | RNVC: 2
636498: RNCC: 5 | RNVC: 9
643797: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-620-6125
Cam

006206125
600209REVBPCALL: RNCC: 3 | RNVC: 2
100290-1: RNCC: 3 | RNVC: 2
600209REVBPCALL: RNCC: 5 | RNVC: 2
3306819REVBPCALL: RNCC: 5 | RNVC: 2
600169PC30: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-620-1069
Tensi Rotor E Shaft

006201069
909D050-2: RNCC: 3 | RNVC: 2
909D050PC1: RNCC: 5 | RNVC: 2
909D050-1: RNCC: 5 | RNVC: 2
909D050-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-608-2151
Control Cam

006082151
G605458: RNCC: 3 | RNVC: 2
G605458: RNCC: 3 | RNVC: 9
G605458: RNCC: 5 | RNVC: 9
G605458: RNCC: 5 | RNVC: 9
G605458: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-604-9171
Shouldered Shaft

006049171
363548PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-603-2719
Cam Shaft

006032719
BUWEPSDWG1544411: RNCC: 3 | RNVC: 2
1544411: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-593-4125
Rotating Shaft Eye Bracket

005934125
631-24: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-586-1167
Aileron Seal Shaft

005861167
4550406: RNCC: 3 | RNVC: 2
4550406: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-571-2895
Control Cam

005712895
816D171PC6: RNCC: 3 | RNVC: 2

17 Jan 1968

3040-00-568-7379
Rigid Connecting Link

005687379
4011023: RNCC: 3 | RNVC: 9
4011023: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-562-7323
Pawl

005627323
546-6815-002: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-417-6319
Spur Gearshaft

004176319
2-030-007-05: RNCC: 3 | RNVC: 2

4 Feb 1972

3040-00-528-1982
Friction Lining

005281982
4A661: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-524-3391
Spur Gearshaft

005243391
177D616PT2REV2: RNCC: 3 | RNVC: 2
177D616PT2: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-520-6058
Rigid Connecting Link

005206058
4015023-2: RNCC: 3 | RNVC: 9
4015023-2: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-512-1131
Rigid Connecting Link

005121131
4015054-9: RNCC: 3 | RNVC: 9
4015054-9: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-510-4080
Rigid Connecting Link

005104080
4041522: RNCC: 3 | RNVC: 9
4041522: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-506-3283
Shouldered Shaft

005063283
P32B8602: RNCC: 3 | RNVC: 2
P32B8602: RNCC: 5 | RNVC: 9
P32B8602: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-498-3870
Remote Control Lever

004983870
10947597: RNCC: 3 | RNVC: 2
4930004983870: RNCC: 5 | RNVC: 9
4930004983870: RNCC: 6 | RNVC: 9

8 Oct 1969

3040-00-495-9499
Remote Control Lever

004959499
A10269: RNCC: 3 | RNVC: 2
A405: RNCC: 5 | RNVC: 2
7371342: RNCC: 5 | RNVC: 2
GPW7520: RNCC: 5 | RNVC: 9
A05: RNCC: 5 | RNVC: 9
GPW7520: RNCC: 5 | RNVC: 9
M8045: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-495-2946
Shouldered Shaft

004952946
261845-172: RNCC: 3 | RNVC: 9

18 Jun 1971

3040-00-495-2944
Shouldered Shaft

004952944
261815-172: RNCC: 3 | RNVC: 9

18 Jun 1971

3040-00-494-8222
Manual Control Lever

004948222
10940390-1: RNCC: 3 | RNVC: 2
2530004948222: RNCC: 5 | RNVC: 9
2530004948222: RNCC: 6 | RNVC: 9

9 Jun 1969

3040-00-494-0316
Control Cam

004940316
U101-5702P1: RNCC: 3 | RNVC: 2
U101-5702P1: RNCC: 5 | RNVC: 2
U101-5702P1: RNCC: 5 | RNVC: 9
60533-1: RNCC: 5 | RNVC: 9

2 Oct 1970

3040-00-484-5993
Spur Gearshaft

004845993
2039466: RNCC: 3 | RNVC: 2
L310029380: RNCC: 5 | RNVC: 2

15 Sep 1969

3040-00-484-4103
Shouldered Shaft

004844103
11812-6: RNCC: 3 | RNVC: 2
11812BPC6: RNCC: 3 | RNVC: 2

23 May 1969

3040-00-483-5550
Bell Crank

004835550
8330896: RNCC: 3 | RNVC: 2
441450: RNCC: 5 | RNVC: 9
4930004835550: RNCC: 5 | RNVC: 9
K911: RNCC: 5 | RNVC: 9
4930004835550: RNCC: 6 | RNVC: 9

18 Jun 1974

3040-00-482-8459
Rigid Connecting Link

004828459
1128C40206-1: RNCC: 3 | RNVC: 2
1128C40206-1: RNCC: 5 | RNVC: 9

25 Jan 1971

3040-00-482-4205
Rigid Connecting Link

004824205
1128C40207-1: RNCC: 3 | RNVC: 2
1128C40207-1: RNCC: 5 | RNVC: 9

20 Jan 1971

3040-00-476-7647
Linear Actuating Cylinder Assembly

004767647
2587468: RNCC: 1 | RNVC: 2
51-0281: RNCC: 3 | RNVC: 2

16 Jun 1971

3040-00-476-7244
Spur Gearshaft

004767244
261931-172: RNCC: 3 | RNVC: 9

10 Jun 1971

3040-00-476-7245
Spur Gearshaft

004767245
261933-172: RNCC: 3 | RNVC: 9

10 Jun 1971

3040-00-471-0301
Cylinder Ring

004710301
4J3745: RNCC: 3 | RNVC: 2

2 Feb 1970

3040-00-469-0188
Rigid Connecting Link

004690188
C271322: RNCC: 3 | RNVC: 9
C271322: RNCC: 5 | RNVC: 2
1620-99-603: RNCC: 6 | RNVC: 9

8 May 1970

3040-00-468-4503
Shouldered Shaft

004684503
431103PCS4-8-12: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-468-0888
Spur Gearshaft

004680888
1620087-1: RNCC: 3 | RNVC: 2

17 Aug 1970

3040-00-467-5876
Ball Joint

004675876
C79774: RNCC: 3 | RNVC: 2

8 May 1970

3040-00-465-9209
Hub Clamp

004659209
11-187: RNCC: 3 | RNVC: 9
10051376: RNCC: 5 | RNVC: 2
11-187: RNCC: 5 | RNVC: 9
11-187: RNCC: 5 | RNVC: 9

19 Jan 1970

3040-00-445-9902
Control Cam

004459902
7307484: RNCC: 3 | RNVC: 2
1015004459902: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-445-8240
Rigid Connecting Link

004458240
1128CV40528-1: RNCC: 3 | RNVC: 2
1128CV40528-1: RNCC: 5 | RNVC: 9

28 Dec 1970

3040-00-444-7842
Rigid Connecting Link

004447842
1128AM40507-1: RNCC: 3 | RNVC: 2
1128AM40507-1: RNCC: 5 | RNVC: 9

21 Dec 1970

3040-00-443-5824
Spur Gearshaft

004435824
7700610: RNCC: 3 | RNVC: 2

4 Apr 1969

3040-00-443-5812
Spur Gearshaft

004435812
7400456: RNCC: 3 | RNVC: 2

4 Apr 1969

3040-00-443-5810
Spur Gearshaft

004435810
7400458: RNCC: 3 | RNVC: 2

4 Apr 1969

3040-00-442-6825
Spur Gearshaft

004426825
7700608: RNCC: 3 | RNVC: 2

28 Mar 1969

3040-00-435-2814
Straight Shaft

004352814
B32257PIAT2: RNCC: 3 | RNVC: 9

17 Mar 1969

3040-00-434-9790
Shouldered Shaft

004349790
6462-1UJTYPEA: RNCC: 3 | RNVC: 9

14 Mar 1969

3040-00-432-1627
Remote Control Lever

004321627
3J7582: RNCC: 3 | RNVC: 2

3 May 1971

3040-00-424-5610
Shouldered Shaft

004245610
PT623: RNCC: 3 | RNVC: 2
WA96B: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-150-1522
Spur Gearshaft

001501522
66340-001: RNCC: 3 | RNVC: 2
66340-001: RNCC: 5 | RNVC: 9

16 Oct 1971

3040-00-416-7220
Linear Actuating Cylinder Piston Rod

004167220
N70100-12: RNCC: 3 | RNVC: 2
N70100: RNCC: D | RNVC: 9

16 Nov 1970

3040-00-412-3464
Shouldered Shaft

004123464
4S9692: RNCC: 3 | RNVC: 2

4 Feb 1972

3040-00-411-8324
Linear Actuating Cylinder Assembly

004118324
10937990: RNCC: 3 | RNVC: 2

25 Aug 1969

3040-00-410-6280
Remote Control Lever

004106280
67A311D29: RNCC: 3 | RNVC: 2
64A98C115-1: RNCC: 5 | RNVC: 2
67A311D29: RNCC: 5 | RNVC: 9
64A98C115-1: RNCC: 5 | RNVC: 9
64A98C115-1: RNCC: 5 | RNVC: 9
67A311D29: RNCC: 5 | RNVC: 9

13 Aug 1969

3040-00-410-6281
Remote Control Lever

004106281
67A311D31: RNCC: 3 | RNVC: 2
64A98C117-1: RNCC: 5 | RNVC: 2
67A311D31: RNCC: 5 | RNVC: 9
64A98C117-1: RNCC: 5 | RNVC: 9
67A311D31: RNCC: 5 | RNVC: 9
64A98C117-1: RNCC: 5 | RNVC: 9

13 Aug 1969

3040-00-410-6278
Remote Control Lever

004106278
67A311F35: RNCC: 3 | RNVC: 2
64A98D126-1: RNCC: 5 | RNVC: 2
64A98D126-1: RNCC: 5 | RNVC: 9
67A311F35: RNCC: 5 | RNVC: 9
67A311F35: RNCC: 5 | RNVC: 9
64A98D126-1: RNCC: 5 | RNVC: 9

13 Aug 1969

3040-00-408-4661
Rigid Connecting Link

004084661
11647554-2: RNCC: 3 | RNVC: 2
3040004084661: RNCC: 5 | RNVC: 9
3040004084661: RNCC: 6 | RNVC: 9

15 Jul 1970

3040-00-404-0779
Rigid Connecting Link

004040779
10886163: RNCC: 3 | RNVC: 2
3040004040779: RNCC: 5 | RNVC: 9
3040004040779: RNCC: 6 | RNVC: 9

6 Aug 1969

3040-00-403-6064
Worm Wheel Gearshaft

004036064
W416AS3X1: RNCC: 3 | RNVC: 9
G9801PC146: RNCC: 5 | RNVC: 9
W416AS3X1: RNCC: 5 | RNVC: 9
G9801PC146: RNCC: 5 | RNVC: 9

24 Jun 1970

3040-00-401-8345
Remote Control Lever

004018345
1073275: RNCC: 3 | RNVC: 2
10885965: RNCC: 5 | RNVC: 2
3040004018345: RNCC: 5 | RNVC: 9
3040004018345: RNCC: 6 | RNVC: 9

30 Mar 1970

3040-00-400-7080
Rigid Connecting Link

004007080
10932873-1: RNCC: 3 | RNVC: 2
2590004007080: RNCC: 5 | RNVC: 9
2590004007080: RNCC: 6 | RNVC: 9

5 Mar 1969

3040-00-399-4097
Thrust Bearing Shoe

003994097
251-2-2067-10: RNCC: 3 | RNVC: 2
25 1-2 2067-10: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-399-1479
Spur Gearshaft

003991479
32J669SH2ITEM3: RNCC: 3 | RNVC: 2
S647740: RNCC: 3 | RNVC: 2
S647740: RNCC: 5 | RNVC: 9
32J669SH2ITEM3: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-390-1228
Thrust Bearing Shoe

003901228
363114-3-4-12: RNCC: 3 | RNVC: 2
163260PC3AND161283PC1: RNCC: 5 | RNVC: 2
BS866: RNCC: 5 | RNVC: 2
C33362PC13: RNCC: 5 | RNVC: 2
363114-3-4-12: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-388-0764
Shoe

003880764
M9081: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-384-3980
Worm Shaft

003843980
265044PC6: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-384-3470
Straight Shaft

003843470
206560PC4: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-383-8017
Bearing Shoe

003838017
4366-32L11PC1: RNCC: 3 | RNVC: 2
4397-32-11PC67: RNCC: 3 | RNVC: 2
4378-32-11PC82: RNCC: 3 | RNVC: 2
4397-32-11PC148-152: RNCC: 3 | RNVC: 2
4397-32L11-1: RNCC: 3 | RNVC: 2
4341-32L11-1: RNCC: 3 | RNVC: 9
4397-32-L-11-1X203X204: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-380-6740
Shouldered Shaft

003806740
365773PC3: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-380-4445
Landing Pawl

003804445
479005PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-379-9243
Shouldered Shaft

003799243
273854PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-379-8797
Shouldered Shaft

003798797
264976PC7: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-379-8659
Shouldered Shaft

003798659
253419PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-379-8373
Straight Shaft

003798373
245663PC4: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-379-8178
Straight Shaft

003798178
233695PC4: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-379-7395
Shouldered Shaft

003797395
151927PC3: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-359-2491
Counterbalance Weight

003592491
679725-0003: RNCC: 3 | RNVC: 2
679725-3: RNCC: 5 | RNVC: 9

18 Feb 1974

3040-00-359-2459
Counterbalance Weight

003592459
679725-0011: RNCC: 3 | RNVC: 2
679725-11: RNCC: 5 | RNVC: 9

18 Feb 1974

3040-00-359-2466
Counterbalance Weight

003592466
679725-0002: RNCC: 3 | RNVC: 2
679725-2: RNCC: 5 | RNVC: 9

18 Feb 1974

3040-00-359-2435
Counterbalance Weight

003592435
679724-0005: RNCC: 3 | RNVC: 2
679724-5: RNCC: 5 | RNVC: 9

18 Feb 1974

3040-00-352-8038
Brake Band And Lining

003528038
5F833: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-351-2815
Bell Crank

003512815
A51C34502-7: RNCC: 3 | RNVC: 2
A51C34502-7: RNCC: 3 | RNVC: 9
A51C34502-7: RNCC: 5 | RNVC: 9

2 Feb 1974

3040-00-344-7804
Shaft Retaining Plate

003447804
315731PC4: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-344-7433
Pawl

003447433
527910: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-334-6337
Rigid Connecting Link

003346337
4042002-2: RNCC: 3 | RNVC: 9
4042002-2: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-327-4993
Straight Shaft

003274993
505-0609-002: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-325-7957
Bell Crank

003257957
647008: RNCC: 3 | RNVC: 2
8677020: RNCC: 3 | RNVC: 2
8677020: RNCC: 5 | RNVC: 9
647008: RNCC: 5 | RNVC: 9
KZ317: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-320-7973
Straight Shaft

003207973
505-0434-002: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-320-6805
Rigid Connecting Link

003206805
4015009: RNCC: 3 | RNVC: 9
4015009: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-318-7175
Shaft Collar

003187175
42358: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-310-4367
Spur Gearshaft

003104367
P9783917P1REV2: RNCC: 3 | RNVC: 2
9783917REV1: RNCC: 3 | RNVC: 2
2396-115: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-310-4037
Spur Gearshaft

003104037
P9785003PT1: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-308-0655
Forward Latch Bar Lever

003080655
255AS128-1: RNCC: 3 | RNVC: 2

17 Oct 1973

3040-00-305-0291
Spur Gearshaft

003050291
715098: RNCC: 3 | RNVC: 2

17 Oct 1973

3040-00-304-5257
Stub Shaft

003045257
101B223DCPC1: RNCC: 3 | RNVC: 9

17 Oct 1973

3040-00-304-5241
Stub Shaft

003045241
101B223EAPC1: RNCC: 3 | RNVC: 9

17 Oct 1973

3040-00-303-6822
Worm Wheel Gearshaft

003036822
210100: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-303-6804
Spur Gearshaft

003036804
204865: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-285-4419
Straight Shaft

002854419
SM-C-500204: RNCC: 3 | RNVC: 2

5 Sep 1973

3040-00-223-8815
Thrust Bearing Shoe

002238815
44-4533PC103: RNCC: 3 | RNVC: 2
465131PC103: RNCC: 5 | RNVC: 2

16 Mar 1970

3040-00-218-5387
Linear Actuating Cylinder

002185387
74222-7030SA: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-218-5218
Straight Shaft

002185218
84284-7130: RNCC: 3 | RNVC: 2
84284-7130F1341: RNCC: 5 | RNVC: 2
84284-7130F1412: RNCC: 5 | RNVC: 2
7140F1336PC33: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-211-3212
Multiple Gears Gearshaft

002113212
99606: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-192-3397
Shaft Retaining Plate

001923397
5B16: RNCC: 3 | RNVC: 2
5B16: RNCC: 5 | RNVC: 9
5B16: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-180-8944
Motor Shaft

001808944
4145840P1: RNCC: 3 | RNVC: 2
4145840P1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-179-6654
Bell Crank

001796654
10932880: RNCC: 3 | RNVC: 2

6 Dec 1968

3040-00-179-5705
Bell Crank

001795705
10871495: RNCC: 3 | RNVC: 2

23 Dec 1968

3040-00-162-5334
Spur Gearshaft

001625334
180567-1: RNCC: 3 | RNVC: 2

5 Nov 1971

3040-00-159-2046
Latch Pawl

001592046
479167PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-159-2045
Latch Pawl

001592045
479167PC3: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-159-2038
Latch Pawl

001592038
479174PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-159-2037
Pawl

001592037
479174PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-155-2910
Linear Actuating Cylinder Assembly

001552910
BM2THR1177: RNCC: 3 | RNVC: 2
516-4510937S3: RNCC: 5 | RNVC: 2

3 Nov 1971

3040-00-136-9246
Shouldered Shaft

001369246
436567: RNCC: 3 | RNVC: 9

11 Jul 1971

3040-00-131-8846
Flexible Shaft Assembly Casing

001318846
S14866-901: RNCC: 3 | RNVC: 2
14866-901: RNCC: 5 | RNVC: 9

11 Dec 1968

3040-00-131-3901
Pawl

001313901
154758PC3: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-129-5147
Remote Control Lever

001295147
2D8259: RNCC: 3 | RNVC: 2

4 Dec 1968

3040-00-126-4218
Pawl

001264218
7025-2C: RNCC: 3 | RNVC: 2
7025: RNCC: 3 | RNVC: 2
7025: RNCC: 5 | RNVC: 9
7025-2C: RNCC: 5 | RNVC: 9
7025: RNCC: 5 | RNVC: 9
7025: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-125-8268
Rotating Shaft Eye Bracket

001258268
74435: RNCC: 3 | RNVC: 2
74435: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-119-5189
Shouldered Shaft

001195189
201028PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-119-5170
Shouldered Shaft

001195170
201049PC3: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-110-5186
Expander Tube Brake

001105186
64A98D725-2: RNCC: 3 | RNVC: 2
64A98D725-2: RNCC: 5 | RNVC: 2
64A98D725-2: RNCC: 5 | RNVC: 9
64A98D725-2: RNCC: 5 | RNVC: 9

9 Aug 1968

3040-00-106-4057
Multiple Gears Gearshaft

001064057
502AS2370: RNCC: 3 | RNVC: 2

19 May 1972

3040-00-106-2188
Mechanical Drive Housing

001062188
10890371: RNCC: 3 | RNVC: 2
2520001062188: RNCC: 6 | RNVC: 9

12 Jul 1968

3040-00-105-2791
Bell Crank

001052791
11588912-1: RNCC: 3 | RNVC: 2
2530001052791: RNCC: 6 | RNVC: 9

1 Jul 1968

3040-00-104-4613
Rigid Connecting Link

001044613
11588920-2: RNCC: 3 | RNVC: 2
3140001044613: RNCC: 5 | RNVC: 9
3140001044613: RNCC: 6 | RNVC: 9

19 Jun 1968

3040-00-104-4605
Straight Shaft

001044605
11588919: RNCC: 3 | RNVC: 2

19 Jun 1968

3040-00-097-8728
Multiple Gears Gearshaft

000978728
605218-1: RNCC: 3 | RNVC: 2

24 May 1968

3040-00-097-1350
Spur Gearshaft

000971350
35407010040: RNCC: 3 | RNVC: 2

13 Dec 1972

3040-00-084-3346
Shouldered Shaft

000843346
DE1021S5801F1533: RNCC: 3 | RNVC: 2
J117: RNCC: 3 | RNVC: 2
653ITEM1: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-082-7654
Spur Gearshaft

000827654
1372D65: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-057-2212
Spur Gearshaft

000572212
BUWEPSDWG2057537: RNCC: 3 | RNVC: 2
2057537: RNCC: 3 | RNVC: 2

1 Jun 1967

3040-00-055-3524
Counterbalance Weight

000553524
370931CLASSA: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-01-687-3188
Rigid Connecting Link

016873188
149T7344-13: RNCC: 3 | RNVC: 1

26 Mar 2020

3040-01-678-7889
Pivot Shaft Assembly

016787889
HA2467-1: RNCC: 3 | RNVC: 2

26 Feb 2019

3040-01-669-3554
Linear Actuating Cylinder Assembly

016693554
4970-010-MCT: RNCC: 3 | RNVC: 2

8 Jan 2018

3040-01-661-8966
Rigid Connecting Link

016618966
12581562: RNCC: 3 | RNVC: 2

20 Mar 2017

3040-01-670-2272
Hydraulic Control Assembly

016702272
12581776-1: RNCC: 3 | RNVC: 2
12581776: RNCC: 5 | RNVC: 2
12581776: RNCC: D | RNVC: 9

14 Oct 2021

3040-01-643-6911
Friction Lining Material

016436911
53829381: RNCC: 3 | RNVC: 2

9 Apr 2015

3040-01-642-1407
Straight Shaft

016421407
701607: RNCC: 3 | RNVC: 2
701600 ITEM NO 3: RNCC: 5 | RNVC: 2

13 Feb 2015

3040-01-646-9810
Mechanical Drive Housing Part

016469810
50-2498-1: RNCC: 3 | RNVC: 2
50-6010-1: RNCC: 5 | RNVC: 2

6 Aug 2015

3040-01-631-7157
Manual Control Lever

016317157
759038: RNCC: 3 | RNVC: 2

23 Sep 2014

3040-01-628-8256
Shouldered Shaft

016288256
6CF-45611-01-00: RNCC: 3 | RNVC: 2
6CF-45611-00-00: RNCC: 5 | RNVC: 9

11 Jun 2014

3040-01-630-9650
Pivot Shaft Assembly

016309650
002570: RNCC: 3 | RNVC: 2
002570: RNCC: 5 | RNVC: 2

25 Aug 2014

3040-01-625-1819
Linear Actuating Cylinder Assembly Parts Kit

016251819
A-KX22404: RNCC: 3 | RNVC: 2
22404 ITEMS NO. 10-21: RNCC: 5 | RNVC: 2

28 Jan 2014

3040-01-624-1867
Ball Joint

016241867
7000AG2254-1: RNCC: 3 | RNVC: 2
7000AG2254: RNCC: D | RNVC: 9

18 Dec 2013

3040-01-625-8422
Rigid Connecting Link

016258422
167-7384498-A2: RNCC: 3 | RNVC: 2
B541-9176-A2: RNCC: 5 | RNVC: 2

18 Feb 2014

3040-01-626-2632
Linear Actuating Cylinder Piston Rod

016262632
68A731837-2001: RNCC: 3 | RNVC: 2

4 Mar 2014

3040-01-607-0629
Gear Shift Lever As

016070629
X25052-55: RNCC: 3 | RNVC: 2
SP25 HEAD ITEM 29: RNCC: 5 | RNVC: 2

30 May 2012

3040-01-606-1810
Clutch Torsion Bar

016061810
AXTDF-07-76-00: RNCC: 3 | RNVC: 2

10 May 2012

3040-01-595-6660
Rigid Connecting Link

015956660
5035L109-1: RNCC: 3 | RNVC: 2
5035L109-5: RNCC: 5 | RNVC: 2

4 May 2011

3040-01-596-0310
Shaft Collar

015960310
4944102: RNCC: 3 | RNVC: 2
C2055475870: RNCC: 5 | RNVC: 9

10 May 2011

3040-01-589-5481
V-Bolt

015895481
PDI 10020: RNCC: 3 | RNVC: 2
PDI 10020: RNCC: 5 | RNVC: 2

29 Oct 2010

3040-01-593-8674
Control Cam

015938674
7072335-3: RNCC: 3 | RNVC: 2
751-7072335-3: RNCC: 3 | RNVC: 2
7072305-61: RNCC: 5 | RNVC: 2
751-7072305-61: RNCC: 5 | RNVC: 2

20 Apr 2011

3040-01-579-0416
Linear Actuating Cylinder Assembly Parts Kit

015790416
530-8663: RNCC: 3 | RNVC: 2
402359: RNCC: 5 | RNVC: 9
530-8663: RNCC: 5 | RNVC: 9

28 Oct 2009

3040-01-576-1909
Detent Plate

015761909
330701: RNCC: 3 | RNVC: 2
ZB0330701: RNCC: 5 | RNVC: 2

23 Jul 2009

3040-01-572-0740
Straight Shaft

015720740
3392AS787: RNCC: 3 | RNVC: 2

26 Feb 2009

3040-01-572-5338
Linear Actuating Cylinder Assembly

015725338
141122B: RNCC: 3 | RNVC: 2
1684470: RNCC: 5 | RNVC: 2

13 Mar 2009

3040-01-568-6671
Push-Pull Control Assembly

015686671
040489-192: RNCC: 3 | RNVC: 2

5 Nov 2008

3040-01-567-6505
Body Hub

015676505
5122105-017-1: RNCC: 3 | RNVC: 2
5122105-017: RNCC: D | RNVC: 9

2 Oct 2008

3040-01-567-5007
Shouldered Shaft

015675007
326668: RNCC: 3 | RNVC: 2
ZB0326668: RNCC: 5 | RNVC: 2

29 Sep 2008

3040-01-561-7457
Control Cam

015617457
12473246: RNCC: 3 | RNVC: 2

17 Mar 2008

3040-01-549-8340
Control Pedal

015498340
347/10240: RNCC: 3 | RNVC: 2

30 Mar 2007

3040-01-549-7773
Control Cable Assembly

015497773
306-9649: RNCC: 3 | RNVC: 2

29 Mar 2007

3040-01-541-5635
Shaft Collar

015415635
29901-01E: RNCC: 3 | RNVC: 2
205101 ITEM 18: RNCC: 5 | RNVC: 2

30 Jun 2006

3040-01-539-4634
Manual Control Lever

015394634
DT12SD-M: RNCC: 3 | RNVC: 2
TFC-VA-00169 ITEM 101: RNCC: 5 | RNVC: 2

24 Apr 2006

3040-01-515-0999
Hydraulic Accumulator Cylinder

015150999
2HA961: RNCC: 3 | RNVC: 2
2HA961: RNCC: 3 | RNVC: 9
4900234-002: RNCC: 5 | RNVC: 2

15 Nov 2003

3040-01-526-4248
Nonaircraft Mechanical Actuator

015264248
65000-00: RNCC: 3 | RNVC: 2

16 Dec 2004

3040-01-530-8737
Flexible Drive Shaft

015308737
4251314015: RNCC: 3 | RNVC: 2

15 Jun 2005

3040-01-500-0713
Disk Brake Shoe

015000713
04-17-200: RNCC: 3 | RNVC: 2
04-17-200: RNCC: 3 | RNVC: 9
PL-04-10-000 ITEM 256: RNCC: 5 | RNVC: 9

13 Aug 2002

3040-01-509-2426
Nonrotating Shaft Eye Bracket

015092426
7232143: RNCC: 3 | RNVC: 2

17 Jun 2003

3040-01-511-2320
Shouldered Shaft

015112320
243-6985876-22: RNCC: 3 | RNVC: 2
H7130105A-22: RNCC: 5 | RNVC: 2
H713-0105-22: RNCC: 5 | RNVC: 9
6985876: RNCC: D | RNVC: 9

5 Aug 2003

3040-01-512-1744
Brake Disc

015121744
90B2B5G047B: RNCC: 3 | RNVC: 2
7D3-07599 REV H ITEM 36: RNCC: 5 | RNVC: 2
7D3-07599: RNCC: D | RNVC: 9

25 Aug 2003

3040-01-510-8405
Shouldered Shaft

015108405
6934700: RNCC: 3 | RNVC: 2
6934683 ITEM 2: RNCC: 5 | RNVC: 2

28 Jul 2003

3040-01-477-6764
Piston Ring

014776764
7755236609: RNCC: 3 | RNVC: 2

15 Aug 2000

3040-01-487-7873
Alignment Gear

014877873
14070-0046: RNCC: 3 | RNVC: 2
388B106FN61: RNCC: 5 | RNVC: 9
14070-0049: RNCC: 5 | RNVC: 9
6707-400-001: RNCC: 5 | RNVC: 9

17 Aug 2001

3040-01-482-6080
Hub Clamp

014826080
6707-300-001: RNCC: 3 | RNVC: 2
6707-300-001: RNCC: 5 | RNVC: 2
6707-300-001: RNCC: 5 | RNVC: 2

28 Feb 2001

3040-01-474-8955
Mechanically Actuated Spindle

014748955
124-4322618 PC 20A: RNCC: 3 | RNVC: 2
4322618: RNCC: D | RNVC: 9

16 May 2000

3040-01-476-6944
Rigid Connecting Link

014766944
6519-123: RNCC: 3 | RNVC: 2
74B428009-123: RNCC: 5 | RNVC: 2
74B428009-123: RNCC: 7 | RNVC: 2

20 Jul 2000

3040-01-470-2071
Rigid Connecting Link

014702071
124-4454122 PC 43: RNCC: 3 | RNVC: 2
124-4322613 PC 22: RNCC: 5 | RNVC: 2
4322613: RNCC: D | RNVC: 9
4454122: RNCC: D | RNVC: 9

10 Dec 1999

3040-01-464-7692
Rigid Connecting Link

014647692
12505145: RNCC: 3 | RNVC: 2

10 May 1999

3040-01-442-9069
Transmission Fluid Cooler

014429069
5-036-10-066-001: RNCC: 3 | RNVC: 2
5-036-10-066-001: RNCC: 5 | RNVC: 9

26 Mar 1997

3040-01-451-3421
Control Cam

014513421
03.9912.001: RNCC: 3 | RNVC: 2
11.1099.008-250: RNCC: 5 | RNVC: 1
11.1099.008-250: RNCC: 5 | RNVC: 1
11.1099.009-250: RNCC: 5 | RNVC: 1
11.1099.010-250: RNCC: 5 | RNVC: 1
11.1099.017-250: RNCC: 5 | RNVC: 1

12 Dec 1997

3040-01-435-1176
Linear Actuating Cylinder Assembly

014351176
096192: RNCC: 3 | RNVC: 9
648556: RNCC: 5 | RNVC: 2

14 Aug 1996

3040-01-435-0999
Linear Actuating Cylinder Assembly

014350999
SS-J: RNCC: 3 | RNVC: 2
9C00473-1: RNCC: 5 | RNVC: 2
9C00473-1: RNCC: 5 | RNVC: 9

14 Aug 1996

3040-01-424-9071
Linear Actuating Cylinder Assembly

014249071
EE110799E: RNCC: 3 | RNVC: 2
2.50CBB2HKTVS14A6: RNCC: 5 | RNVC: 1

7 Feb 1996

3040-01-413-2526
Flexible Shaft Assembly

014132526
B-416-8897-103X12FT: RNCC: 3 | RNVC: 2
8897 ASSY B-416-8897-103X12FT: RNCC: 5 | RNVC: 2
500-6574890 FIND NO.70 103X12FT: RNCC: 5 | RNVC: 2
8897: RNCC: D | RNVC: 9

10 May 1995

3040-01-407-3568
Linear Actuating Cylinder Assembly

014073568
TG10KRCFXAACA248: RNCC: 3 | RNVC: 2
CA248: RNCC: 5 | RNVC: 9
8068: RNCC: C | RNVC: 1

26 Jan 1995

3040-01-399-1016
Straight Shaft

013991016
92-AV101-N-SYM-104: RNCC: 3 | RNVC: 2
92-AV101-N SHT 13 ITEM 104: RNCC: 5 | RNVC: 9
M611-SYM-65: RNCC: 5 | RNVC: 9

16 Nov 1994

3040-01-374-2514
Shouldered Shaft Assembly

013742514
12389419: RNCC: 3 | RNVC: 2

19 Apr 1993

3040-01-377-4298
Rigid Connecting Link

013774298
8629149: RNCC: 3 | RNVC: 2
8629149: RNCC: 5 | RNVC: 9

15 Jul 1993

3040-01-377-4001
Shouldered Shaft

013774001
6113523: RNCC: 3 | RNVC: 2

15 Jul 1993

3040-01-366-5294
Manual Control Lever

013665294
715056A00: RNCC: 3 | RNVC: 2
715056-A: RNCC: 3 | RNVC: 9
715056-A: RNCC: 5 | RNVC: 9

28 Oct 1992

3040-01-359-9870
Push-Pull Control Assembly

013599870
5544224: RNCC: 3 | RNVC: 2
5544224: RNCC: 5 | RNVC: 2
5544224: RNCC: 5 | RNVC: 9

17 Jun 1992

3040-01-348-1518
Piston Rod Ring

013481518
1211345-220-212: RNCC: 3 | RNVC: 2
1211345-220: RNCC: D | RNVC: 9

5 Nov 1991

3040-01-337-8849
Mechanical Drive Housing

013378849
23503791: RNCC: 3 | RNVC: 2
2GH514: RNCC: 5 | RNVC: 2
23503791: RNCC: 5 | RNVC: 2
2GH514: RNCC: 5 | RNVC: 9

23 Apr 1991

3040-01-311-7824
Shouldered Shaft

013117824
152-4183-7: RNCC: 3 | RNVC: 2

5 Dec 1989

3040-01-322-5751
Shouldered Shaft

013225751
5186924: RNCC: 3 | RNVC: 2
5186924: RNCC: 5 | RNVC: 2

10 Jul 1990

3040-01-294-4385
Straight Shaft

012944385
135B5909-3: RNCC: 3 | RNVC: 2
135B5909: RNCC: D | RNVC: 9

16 Feb 1989

3040-01-278-2406
Push-Pull Control Assembly

012782406
958E351G-1: RNCC: 3 | RNVC: 2
958E351-G01: RNCC: 3 | RNVC: 9
958E353 ITEM 7: RNCC: 5 | RNVC: 9

3 May 1988

3040-01-275-8039
Body Hub

012758039
750263-1: RNCC: 3 | RNVC: 2
750263: RNCC: 5 | RNVC: 2

26 Mar 1988

3040-01-252-8487
Manual Control Lever

012528487
01215901: RNCC: 3 | RNVC: 2
01215900: RNCC: D | RNVC: 9

8 Apr 1987

3040-01-261-0246
Linear Actuating Cylinder Assembly

012610246
58524600-1: RNCC: 3 | RNVC: 2
P-85246-1: RNCC: 3 | RNVC: 9
P-85246: RNCC: D | RNVC: 9

7 Aug 1987

3040-01-246-5938
Linear Actuating Cylinder Assembly

012465938
52B10143-1: RNCC: 3 | RNVC: 2
3.25-DD2HLT39A-22.00: RNCC: 5 | RNVC: 2
3040PL0828037: RNCC: 6 | RNVC: 9

16 Dec 1986

3040-01-249-3386
Shouldered Shaft

012493386
656Q0088G024A: RNCC: 3 | RNVC: 2
656Q0088C024A: RNCC: 5 | RNVC: 9
999F0716 PC 9: RNCC: C | RNVC: 1

10 Feb 1987

3040-01-233-4086
Rigid Connecting Link

012334086
90-4066: RNCC: 3 | RNVC: 2

30 May 1986

3040-01-222-5901
Shouldered Shaft

012225901
12008185: RNCC: 3 | RNVC: 2

13 Dec 1985

3040-01-218-8256
Rigid Connecting Link

012188256
1311023-104: RNCC: 3 | RNVC: 2

19 Oct 1985

Load More Results