What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 143 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 143 of 300

3040-01-332-4827
Control Pedal

013324827
3800-057: RNCC: 3 | RNVC: 2

11 Jan 1991

3040-01-332-4817
Rigid Connecting Link

013324817
908-237-081: RNCC: 3 | RNVC: 2

11 Jan 1991

3040-01-332-2450
Mechanical Drive Housing

013322450
709A1752: RNCC: 3 | RNVC: 2

8 Jan 1991

3040-01-331-9510
Bell Crank

013319510
396163: RNCC: 3 | RNVC: 2
396163: RNCC: 5 | RNVC: 9

31 Dec 1990

3040-01-331-2695
Linear Actuating Cylinder Assembly Parts Kit

013312695
549-26175: RNCC: 3 | RNVC: 2

15 Dec 1990

3040-01-331-1713
Linear Actuating Cylinder Assembly Parts Kit

013311713
9-752-100634: RNCC: 3 | RNVC: 9
9-752-100634: RNCC: 5 | RNVC: 2

14 Dec 1990

3040-01-330-9468
Counterbalance Weight

013309468
7123-914E: RNCC: 3 | RNVC: 2

12 Dec 1990

3040-01-329-6480
Shouldered Shaft

013296480
70361-03014-101: RNCC: 3 | RNVC: 2
70361-03014-101: RNCC: 5 | RNVC: 2
70361-03014-101: RNCC: 5 | RNVC: 2
70361-03014-101: RNCC: 5 | RNVC: 2

20 Nov 1990

3040-01-327-7733
Linear Actuating Cylinder Assembly

013277733
50607304: RNCC: 3 | RNVC: 2
21170-5000: RNCC: 5 | RNVC: 2
850-607304: RNCC: 5 | RNVC: 2
607304: RNCC: 5 | RNVC: 9

21 Oct 1990

3040-01-327-5445
Rotating Shaft Eye Bracket

013275445
12313337-4: RNCC: 3 | RNVC: 2
12313337-4: RNCC: 8 | RNVC: 1

17 Oct 1990

3040-01-326-7772
Rigid Connecting Link

013267772
12379435: RNCC: 3 | RNVC: 2

30 Sep 1990

3040-01-326-4535
Straight Shaft

013264535
212768-1: RNCC: 3 | RNVC: 2
267354: RNCC: 5 | RNVC: 2

25 Sep 1990

3040-01-325-9075
Control Cam

013259075
691708: RNCC: 3 | RNVC: 2
212904: RNCC: 5 | RNVC: 9

13 Sep 1990

3040-01-325-2284
Linear Actuating Cylinder Assembly

013252284
AH142930: RNCC: 3 | RNVC: 2
RE33259: RNCC: 5 | RNVC: 9
AH136546: RNCC: 5 | RNVC: 9

31 Aug 1990

3040-01-324-2688
Remote Control Lever

013242688
365148: RNCC: 3 | RNVC: 2
212866-1: RNCC: 3 | RNVC: 2
365148: RNCC: 3 | RNVC: 2
212866-1: RNCC: 5 | RNVC: 2
365148: RNCC: 5 | RNVC: 2

14 Aug 1990

3040-01-324-1251
Linear Actuating Cylinder Assembly

013241251
AHC12202: RNCC: 3 | RNVC: 2
AH150098: RNCC: 5 | RNVC: 9
RE24865: RNCC: 5 | RNVC: 9

10 Aug 1990

3040-01-322-4602
Spur Gearshaft

013224602
25652: RNCC: 3 | RNVC: 9
230046: RNCC: 5 | RNVC: 2

6 Jul 1990

3040-01-322-4588
Shouldered Shaft

013224588
4W4998: RNCC: 3 | RNVC: 2

6 Jul 1990

3040-01-321-6363
Control Cam

013216363
5100700: RNCC: 3 | RNVC: 2

20 Jun 1990

3040-01-320-8359
Nonaircraft Mechanical Actuator

013208359
22386: RNCC: 3 | RNVC: 2
HP-28-S-FT-180/190-S1-O-H: RNCC: 5 | RNVC: 2
6227763: RNCC: 5 | RNVC: 2
HP28KS-FT-180DEG-O-H: RNCC: 5 | RNVC: 9
HP28KS-FT-190-0-H: RNCC: 5 | RNVC: 9
HP28KS-FT-180-0-H: RNCC: 5 | RNVC: 9
6227763: RNCC: 7 | RNVC: 1

4 Jun 1990

3040-01-320-2694
Linear Actuating Cylinder Assembly Parts Kit

013202694
12009353: RNCC: 1 | RNVC: 2
A75431: RNCC: 3 | RNVC: 2

23 May 1990

3040-01-320-1893
Straight Shaft

013201893
70219-42418-108: RNCC: 3 | RNVC: 2

22 May 1990

3040-01-319-9393
Helical Gearshaft

013199393
3117V003: RNCC: 3 | RNVC: 2

17 May 1990

3040-01-319-8999
Body Hub

013198999
12909176: RNCC: 3 | RNVC: 2
12009187: RNCC: E | RNVC: 8

16 May 1990

3040-01-317-8519
Linear Actuating Cylinder

013178519
61-0850-00: RNCC: 3 | RNVC: 2
61-0304-00: RNCC: 5 | RNVC: 9

6 Apr 1990

3040-01-317-8520
Linear Actuating Cylinder

013178520
61-0690-00: RNCC: 3 | RNVC: 2

6 Apr 1990

3040-01-317-8290
Remote Control Lever

013178290
119153: RNCC: 3 | RNVC: 9
118198: RNCC: 5 | RNVC: 9
120076: RNCC: D | RNVC: 9

6 Apr 1990

3040-01-316-1123
Nonvehicular Propeller Shaft

013161123
3-3-1601X: RNCC: 3 | RNVC: 2
X915819: RNCC: D | RNVC: 9

3 Mar 1990

3040-01-315-9424
Shouldered Shaft

013159424
10862129: RNCC: 3 | RNVC: 2

28 Feb 1990

3040-01-315-6720
Manual Control Lever

013156720
102461-K: RNCC: 3 | RNVC: 2
30103-BC: RNCC: D | RNVC: 9

22 Feb 1990

3040-01-315-6230
Shaft Collar

013156230
PC2049: RNCC: 3 | RNVC: 9

21 Feb 1990

3040-01-315-5071
Rigid Connecting Link

013155071
484300C1: RNCC: 3 | RNVC: 2

17 Feb 1990

3040-01-315-3700
Straight Shaft

013153700
4-22516-02: RNCC: 3 | RNVC: 2

15 Feb 1990

3040-01-315-1004
Breather

013151004
BF-6: RNCC: 3 | RNVC: 2

9 Feb 1990

3040-01-314-5917
Remote Control Lever

013145917
324965: RNCC: 3 | RNVC: 2
324965: RNCC: 3 | RNVC: 9

1 Feb 1990

3040-01-313-8749
Shouldered Shaft

013138749
234825: RNCC: 3 | RNVC: 2
234825: RNCC: 5 | RNVC: 9

19 Jan 1990

3040-01-313-8750
Shouldered Shaft

013138750
234824: RNCC: 3 | RNVC: 2
234824: RNCC: 5 | RNVC: 9

19 Jan 1990

3040-01-313-6647
Pawl

013136647
S600018: RNCC: 3 | RNVC: 2
600018: RNCC: 3 | RNVC: 9

12 Jan 1990

3040-01-313-4191
Shouldered Shaft

013134191
70351-38115-101: RNCC: 3 | RNVC: 2

9 Jan 1990

3040-01-313-2880
Linear Actuating Cylinder Piston

013132880
240003: RNCC: 3 | RNVC: 2

4 Jan 1990

3040-01-312-2573
Mechanical Drive Housing

013122573
70351-38148-101: RNCC: 3 | RNVC: 2

13 Dec 1989

3040-01-311-6861
Linear Actuating Cylinder Assembly

013116861
537741: RNCC: 3 | RNVC: 2
021898-01: RNCC: 5 | RNVC: 9

2 Dec 1989

3040-01-311-4013
Connecting Link Parts Kit

013114013
13228E6287: RNCC: 3 | RNVC: 2

25 Nov 1989

3040-01-310-4853
Shaft Retaining Plate

013104853
242851: RNCC: 3 | RNVC: 2
242851: RNCC: 5 | RNVC: 9

4 Nov 1989

3040-01-307-6157
Clutch Thrust Plate

013076157
21009: RNCC: 3 | RNVC: 9

14 Sep 1989

3040-01-306-5078
Mechanical Drive Housing

013065078
TH17: RNCC: 3 | RNVC: 2

25 Aug 1989

3040-01-306-0021
Extractable Pivot

013060021
95445: RNCC: 3 | RNVC: 2

15 Aug 1989

3040-01-305-8064
Rigid Connecting Link

013058064
11392-001: RNCC: 3 | RNVC: 2
11392-001: RNCC: 3 | RNVC: 9

11 Aug 1989

3040-01-305-3321
Manual Control Lever

013053321
472 219C1: RNCC: 3 | RNVC: 2

3 Aug 1989

3040-01-304-8060
Linear Actuating Cylinder Assembly

013048060
92182-991: RNCC: 3 | RNVC: 2
3538814-802: RNCC: 5 | RNVC: 2
92182-991: RNCC: 5 | RNVC: 9
3536264-802: RNCC: 5 | RNVC: 9
3538814-802: RNCC: 5 | RNVC: 9
472-9815: RNCC: 6 | RNVC: 9

27 Jul 1989

3040-01-304-5607
Push-Pull Control Assembly

013045607
28229837: RNCC: 3 | RNVC: 2

20 Jul 1989

3040-01-302-4950
Shouldered Shaft

013024950
424-L: RNCC: 3 | RNVC: 2

15 Jun 1989

3040-01-302-4492
Gearshaft Assembly

013024492
1-080-280-03: RNCC: 3 | RNVC: 2
1-080-280-03: RNCC: 7 | RNVC: 2
1-080-280-03: RNCC: C | RNVC: 1

15 Jun 1989

3040-01-302-3010
Breather

013023010
ABB-113766-000: RNCC: 3 | RNVC: 2
001-013059-999: RNCC: 5 | RNVC: 9

13 Jun 1989

3040-01-302-2589
Remote Control Lever

013022589
126 270 04 57: RNCC: 3 | RNVC: 2
4538742-706: RNCC: 3 | RNVC: 2
4538742-706: RNCC: 5 | RNVC: 2
126 270 04 57: RNCC: 5 | RNVC: 9
94302-991: RNCC: 5 | RNVC: 9
4538742-706: RNCC: 5 | RNVC: 9

10 Jun 1989

3040-01-302-2542
Straight Shaft

013022542
3227-3045-0: RNCC: 3 | RNVC: 2
01032110: RNCC: 5 | RNVC: 9

10 Jun 1989

3040-01-300-3919
Shouldered Shaft

013003919
1 466 100 402: RNCC: 3 | RNVC: 2
1 466 100 325: RNCC: 5 | RNVC: 9
1 466 100 325: RNCC: 5 | RNVC: 9

14 May 1989

3040-01-299-8100
Rigid Connecting Link

012998100
204-310-101-101: RNCC: 3 | RNVC: 2
204-310-101-101: RNCC: 5 | RNVC: 2
204-310-101-101: RNCC: 5 | RNVC: 2
204-310-101-101: RNCC: 5 | RNVC: 9
AA-204-310-101-101: RNCC: 5 | RNVC: 9
204-310-101-101: RNCC: 5 | RNVC: 9

7 May 1989

3040-01-297-3413
Straight Shaft

012973413
CL127.149: RNCC: 3 | RNVC: 9

1 Apr 1989

3040-01-297-2893
Counterbalance Weight

012972893
5060T65P01: RNCC: 3 | RNVC: 2

1 Apr 1989

3040-01-295-7139
Linear Actuating Cylinder

012957139
9J8165: RNCC: 3 | RNVC: 2
5R4547: RNCC: 5 | RNVC: 9

10 Mar 1989

3040-01-295-7086
Shaft Collar

012957086
6319-1: RNCC: 3 | RNVC: 2
6319: RNCC: D | RNVC: 9

10 Mar 1989

3040-01-294-3393
Straight Shaft

012943393
7W4381: RNCC: 3 | RNVC: 2

15 Feb 1989

3040-01-294-3394
Straight Shaft

012943394
4N0345: RNCC: 3 | RNVC: 2
7C6697: RNCC: C | RNVC: 1

15 Feb 1989

3040-01-293-8581
Linear Actuating Cylinder Assembly

012938581
13219E4144-2: RNCC: 1 | RNVC: 2
13219E4144-2: RNCC: 3 | RNVC: 9
1000873: RNCC: 5 | RNVC: 9

8 Feb 1989

3040-01-293-7126
Linear Actuating Cylinder Assembly

012937126
A3-3280-X-8500: RNCC: 3 | RNVC: 2

4 Feb 1989

3040-01-292-1617
Bevel Gearshaft

012921617
70358-06620-102: RNCC: 3 | RNVC: 2
70358-06620-102: RNCC: 5 | RNVC: 9
70358-06620-102: RNCC: 5 | RNVC: 9
70358-06620-101: RNCC: C | RNVC: 1
70358-06620-101: RNCC: C | RNVC: 1
70358-06620-101: RNCC: C | RNVC: 1
70358-06620-101: RNCC: C | RNVC: 1

12 Jan 1989

3040-01-291-9597
Gearbox Parts Kit

012919597
15594112: RNCC: 3 | RNVC: 2
15594112: RNCC: 5 | RNVC: 9

9 Jan 1989

3040-01-291-8689
Linear Actuating Cylinder Assembly

012918689
150-003: RNCC: 3 | RNVC: 9

6 Jan 1989

3040-01-291-8214
Shouldered Shaft

012918214
A187739: RNCC: 3 | RNVC: 2
10497854: RNCC: 3 | RNVC: 2
10497854: RNCC: 5 | RNVC: 9

6 Jan 1989

3040-01-291-5883
Linear Actuating Cylinder Cap

012915883
1332035: RNCC: 3 | RNVC: 2
309059: RNCC: 5 | RNVC: 9
1332035: RNCC: 5 | RNVC: 9

30 Dec 1988

3040-01-289-8252
Linear Actuating Cylinder Assembly

012898252
6600324: RNCC: 3 | RNVC: 2
6600324: RNCC: 5 | RNVC: 9

1 Dec 1988

3040-01-287-2438
Rigid Connecting Link

012872438
70400-08151-061: RNCC: 3 | RNVC: 2
3040PL2008544: RNCC: 6 | RNVC: 9
70400-08151-061: RNCC: 7 | RNVC: 2

19 Oct 1988

3040-01-282-5368
Rigid Connecting Link

012825368
07543: RNCC: 3 | RNVC: 9

16 Jul 1988

3040-01-282-1741
Linear Actuating Cylinder Assembly Parts Kit

012821741
9-752-100676: RNCC: 3 | RNVC: 2

9 Jul 1988

3040-01-281-7444
Manual Control Lever

012817444
0325541: RNCC: 3 | RNVC: 2
325541: RNCC: 5 | RNVC: 2
325541: RNCC: 5 | RNVC: 9
325541: RNCC: 5 | RNVC: 9
0325541: RNCC: 5 | RNVC: 9
0325541: RNCC: 5 | RNVC: 9
325541: RNCC: 5 | RNVC: 9
0325541: RNCC: 5 | RNVC: 9

30 Jun 1988

3040-01-281-2915
Shaft Retaining Plate

012812915
12362187: RNCC: 3 | RNVC: 2

21 Jun 1988

3040-01-281-2177
Flexible Drive Shaft

012812177
91100: RNCC: 3 | RNVC: 2

19 Jun 1988

3040-01-277-5665
Straight Shaft

012775665
13228E6090: RNCC: 3 | RNVC: 2
BS.2318.00.00.059: RNCC: 5 | RNVC: 9
BS.2435.00.00.034: RNCC: 5 | RNVC: 9

22 Apr 1988

3040-01-273-7575
Rigid Connecting Link

012737575
70400-02154-050: RNCC: 3 | RNVC: 2
3040PL1952644: RNCC: 6 | RNVC: 9

1 Mar 1988

3040-01-273-4461
Remote Control Lever

012734461
3P6287: RNCC: 3 | RNVC: 2

25 Feb 1988

3040-01-269-4771
Straight Shaft

012694771
500320: RNCC: 3 | RNVC: 2
500320: RNCC: 5 | RNVC: 2
500320: RNCC: 5 | RNVC: 9

17 Dec 1987

3040-01-268-9955
Spur Gearshaft

012689955
25511: RNCC: 3 | RNVC: 9
207425: RNCC: 5 | RNVC: 2

10 Dec 1987

3040-01-268-9884
Straight Shaft

012689884
25666: RNCC: 3 | RNVC: 9
207431: RNCC: 5 | RNVC: 2

10 Dec 1987

3040-01-268-7551
Extension Shaft

012687551
384-1683-01: RNCC: 3 | RNVC: 2

5 Dec 1987

3040-01-268-5406
Body Hub

012685406
33451804: RNCC: 3 | RNVC: 2

2 Dec 1987

3040-01-268-1402
Mechanical Drive Housing

012681402
707719: RNCC: 3 | RNVC: 9
26843: RNCC: 5 | RNVC: 2

23 Nov 1987

3040-01-267-6873
Shaft Retaining Plate

012676873
A6506B: RNCC: 3 | RNVC: 2

17 Nov 1987

3040-01-267-2085
Linear Actuating Cylinder Piston Rod

012672085
7J3338: RNCC: 3 | RNVC: 2

6 Nov 1987

3040-01-267-2077
Spur Gearshaft

012672077
1144682: RNCC: 3 | RNVC: 2
8P4547: RNCC: 5 | RNVC: 9

6 Nov 1987

3040-01-267-2078
Multiple Gears Gearshaft

012672078
1144680: RNCC: 3 | RNVC: 2
8P4548: RNCC: 5 | RNVC: 9

6 Nov 1987

3040-01-266-4527
Bell Crank

012664527
70400-02212-048: RNCC: 3 | RNVC: 2
70400-02212-048: RNCC: 5 | RNVC: 9

25 Oct 1987

3040-01-264-9538
Linear Actuating Cylinder Assembly

012649538
396-9840: RNCC: 3 | RNVC: 2
8S7650: RNCC: 5 | RNVC: 9

8 Oct 1987

3040-01-264-4755
Manual Control Lever

012644755
13156-1178: RNCC: 3 | RNVC: 9
13156-1178: RNCC: 5 | RNVC: 2
13156-1178: RNCC: 5 | RNVC: 9

2 Oct 1987

3040-01-263-3256
Worm Shaft

012633256
010-10003-1: RNCC: 3 | RNVC: 2
010-10003-1: RNCC: 3 | RNVC: 9

12 Sep 1987

3040-01-263-3195
Linear Actuating Cylinder Piston Rod

012633195
375634: RNCC: 3 | RNVC: 2
375634: RNCC: 5 | RNVC: 9
375634: RNCC: C | RNVC: 1
370406: RNCC: D | RNVC: 9

12 Sep 1987

3040-01-263-0070
Mechanical Drive Housing

012630070
3908083: RNCC: 3 | RNVC: 2

9 Sep 1987

3040-01-262-2677
Linear Actuating Cylinder Piston Rod

012622677
324297: RNCC: 3 | RNVC: 9
9125310241: RNCC: 5 | RNVC: 2
9125310241: RNCC: 5 | RNVC: 9

26 Aug 1987

3040-01-262-2477
Linear Actuating Cylinder Piston Rod

012622477
DH2-272: RNCC: 3 | RNVC: 2
DH2-272: RNCC: 3 | RNVC: 9
7091005 PIECE 7: RNCC: 5 | RNVC: 2
7091005 PIECE 7: RNCC: 5 | RNVC: 9
7091005: RNCC: D | RNVC: 9

26 Aug 1987

3040-01-262-2476
Linear Actuating Cylinder Piston

012622476
DH4-165: RNCC: 3 | RNVC: 2
7091005 PIECE 5: RNCC: 5 | RNVC: 2
DH4-165: RNCC: 5 | RNVC: 9
7091005: RNCC: D | RNVC: 9

26 Aug 1987

3040-01-262-1198
Manual Control Lever

012621198
306111: RNCC: 3 | RNVC: 2
306111: RNCC: 5 | RNVC: 9

22 Aug 1987

3040-01-261-9806
Linear Actuating Cylinder Assembly

012619806
61530-064047: RNCC: 3 | RNVC: 2
709 1004: RNCC: 5 | RNVC: 2

20 Aug 1987

3040-01-261-9754
Shouldered Shaft

012619754
76-4161: RNCC: 3 | RNVC: 2
76-4161: RNCC: 3 | RNVC: 2

20 Aug 1987

3040-01-261-5078
Mechanical Drive Housing

012615078
72-2045: RNCC: 3 | RNVC: 2
72-2045: RNCC: 3 | RNVC: 2

14 Aug 1987

3040-01-253-5584
Remote Control Lever

012535584
5R7003: RNCC: 3 | RNVC: 2
5R8545: RNCC: 5 | RNVC: 9

21 Apr 1987

3040-01-253-5580
Remote Control Lever

012535580
4W5735: RNCC: 3 | RNVC: 2

21 Apr 1987

3040-01-253-5543
Shouldered Shaft

012535543
10-21-122-002: RNCC: 3 | RNVC: 9

21 Apr 1987

3040-01-253-3853
Rotating Shaft Eye Bracket

012533853
E99-116: RNCC: 3 | RNVC: 9

17 Apr 1987

3040-01-251-9385
Straight Shaft

012519385
11023723: RNCC: 3 | RNVC: 2
11023723: RNCC: 5 | RNVC: 2

26 Mar 1987

3040-01-251-6236
Spur Gearshaft

012516236
06T33963: RNCC: 3 | RNVC: 2
06T33963: RNCC: 5 | RNVC: 2

21 Mar 1987

3040-01-251-3190
Push-Pull Control Assembly

012513190
20MC0113: RNCC: 3 | RNVC: 2
4D1100-SN-095A-109: RNCC: 5 | RNVC: 2
619-8.5: RNCC: 5 | RNVC: 2
619-8.5: RNCC: 5 | RNVC: 9
4D1100-SN-095A-109: RNCC: 5 | RNVC: 9
11023722: RNCC: 7 | RNVC: 2

17 Mar 1987

3040-01-250-6046
Control Cam

012506046
9377637: RNCC: 3 | RNVC: 2

4 Mar 1987

3040-01-247-7969
Control Cam

012477969
9390031: RNCC: 3 | RNVC: 2

13 Jan 1987

3040-01-247-3225
Shaft Collar

012473225
513062: RNCC: 3 | RNVC: 2

31 Dec 1986

3040-01-247-2570
Manual Control Lever

012472570
61516: RNCC: 3 | RNVC: 2

31 Dec 1986

3040-01-245-1887
Rigid Connecting Link

012451887
13220E5616: RNCC: 3 | RNVC: 2
13220E5616: RNCC: 5 | RNVC: 2
13220E5616: RNCC: 5 | RNVC: 9
13220E5616: RNCC: 5 | RNVC: 9

24 Nov 1986

3040-01-245-0238
Shaft Retaining Plate

012450238
70308-03612-108: RNCC: 3 | RNVC: 2

23 Nov 1986

3040-01-244-3646
Helical Gearshaft

012443646
52068157: RNCC: 3 | RNVC: 2
2538934: RNCC: 5 | RNVC: 9
2538935: RNCC: 5 | RNVC: 9
3212735: RNCC: 5 | RNVC: 9
3212719: RNCC: D | RNVC: 9

11 Nov 1986

3040-01-244-2594
Manual Control Lever

012442594
E0TZ1021819-B: RNCC: 3 | RNVC: 9
E0TZ1021819-B: RNCC: 5 | RNVC: 9

8 Nov 1986

3040-01-243-4934
Remote Control Lever

012434934
22038927: RNCC: 3 | RNVC: 2
22038927: RNCC: 5 | RNVC: 9
22009310: RNCC: C | RNVC: 1
22020812CHT: RNCC: D | RNVC: 9

28 Oct 1986

3040-01-243-1472
Linear Actuating Cylinder Assembly

012431472
SSR-12-1: RNCC: 3 | RNVC: 2

23 Oct 1986

3040-01-241-4814
Rigid Connecting Link

012414814
D89620: RNCC: 3 | RNVC: 2
D89620: RNCC: 5 | RNVC: 9

26 Sep 1986

3040-01-241-4693
Straight Shaft

012414693
3038904: RNCC: 3 | RNVC: 2

26 Sep 1986

3040-01-241-4696
Shouldered Shaft

012414696
3046680: RNCC: 3 | RNVC: 2
3006350: RNCC: 5 | RNVC: 9

26 Sep 1986

3040-01-241-4267
Mechanical Drive Housing

012414267
300555700: RNCC: 3 | RNVC: 2
3005557: RNCC: 5 | RNVC: 9

25 Sep 1986

3040-01-240-8628
Rigid Connecting Link

012408628
L73300: RNCC: 3 | RNVC: 2

19 Sep 1986

3040-01-240-8552
Mechanical Drive Housing

012408552
416 331 04 05: RNCC: 3 | RNVC: 2
416 331 0605: RNCC: 5 | RNVC: 2
416 331 0605: RNCC: 5 | RNVC: 9

19 Sep 1986

3040-01-239-8348
Lever

012398348
9N1916: RNCC: 3 | RNVC: 2

5 Sep 1986

3040-01-239-8349
Lever

012398349
9N2165: RNCC: 3 | RNVC: 2

5 Sep 1986

3040-01-232-8255
Speedometer-Tachometer Drive Adapter

012328255
476259C1: RNCC: 3 | RNVC: 9
476259C1: RNCC: 5 | RNVC: 2
ES775N: RNCC: 5 | RNVC: 9

21 May 1986

3040-01-231-9841
Linear Actuating Cylinder Assembly

012319841
1-1/8CLAD6: RNCC: 3 | RNVC: 2

7 May 1986

3040-01-231-9218
Shaft

012319218
75285-4: RNCC: 3 | RNVC: 2

6 May 1986

3040-01-226-2205
Brake Drum Adapter

012262205
11501: RNCC: 3 | RNVC: 2
2CD526: RNCC: 5 | RNVC: 2
2CD526: RNCC: 5 | RNVC: 9
11501: RNCC: 5 | RNVC: 9

13 Feb 1986

3040-01-222-9427
Rigid Connecting Link

012229427
4F23660-119C: RNCC: 3 | RNVC: 2

20 Dec 1985

3040-01-219-5697
Mechanical Drive Housing

012195697
3038668: RNCC: 3 | RNVC: 2

29 Oct 1985

3040-01-217-1347
Rotating Shaft Eye Bracket

012171347
C0105065300: RNCC: 3 | RNVC: 9
C0105053400: RNCC: 5 | RNVC: 9
105-0534: RNCC: 5 | RNVC: 9

22 Sep 1985

3040-01-214-3146
Shouldered Shaft

012143146
1373380: RNCC: 3 | RNVC: 2
1373380: RNCC: 5 | RNVC: 9

8 Aug 1985

3040-01-213-7758
Remote Control Lever

012137758
1418960W: RNCC: 3 | RNVC: 2
1418960W: RNCC: 5 | RNVC: 9

30 Jul 1985

3040-01-209-9968
Shouldered Shaft

012099968
707728: RNCC: 3 | RNVC: 2
707728WE: RNCC: 5 | RNVC: 9

6 Jun 1985

3040-01-209-8678
Control Cam

012098678
9376397-2: RNCC: 3 | RNVC: 2
9376397: RNCC: D | RNVC: 9

4 Jun 1985

3040-01-208-7049
Shouldered Shaft

012087049
7N5239: RNCC: 3 | RNVC: 2

17 May 1985

3040-01-208-5777
Straight Shaft

012085777
12009296: RNCC: 3 | RNVC: 2

15 May 1985

3040-01-208-4601
Rigid Connecting Link

012084601
235791-0001: RNCC: 3 | RNVC: 2
191803-0025: RNCC: 5 | RNVC: 9

14 May 1985

3040-01-207-6569
Mechanical Drive Housing

012076569
26988: RNCC: 3 | RNVC: 2
26988: RNCC: 3 | RNVC: 9

4 May 1985

3040-01-207-6412
Mechanical Drive Housing

012076412
3-173-800-900: RNCC: 3 | RNVC: 2
3040012076412: RNCC: 6 | RNVC: 9

3 May 1985

3040-01-206-8989
Pawl

012068989
12336104-2: RNCC: 3 | RNVC: 2

24 Apr 1985

3040-01-199-7942
Straight Shaft

011997942
32754-32: RNCC: 3 | RNVC: 9
3314846 PIECE 26: RNCC: 5 | RNVC: 2
29983-31: RNCC: 5 | RNVC: 9
14025-1 PIECE 26: RNCC: 5 | RNVC: 9
32060-34: RNCC: C | RNVC: 1
3314846: RNCC: D | RNVC: 9
14025-1: RNCC: D | RNVC: 9

25 Jan 1985

3040-01-191-4160
Shouldered Shaft

011914160
239078: RNCC: 3 | RNVC: 2
239078: RNCC: 3 | RNVC: 9
239078: RNCC: 5 | RNVC: 9
239078: RNCC: 5 | RNVC: 9
239078: RNCC: 5 | RNVC: 9

7 Oct 1984

3040-01-190-0449
Shouldered Shaft

011900449
232393: RNCC: 3 | RNVC: 2
232393: RNCC: 5 | RNVC: 2
232393: RNCC: 5 | RNVC: 9
232393: RNCC: 5 | RNVC: 9

23 Sep 1984

3040-01-189-6603
Shouldered Shaft

011896603
239080: RNCC: 3 | RNVC: 2
239080: RNCC: 5 | RNVC: 2
239080: RNCC: 5 | RNVC: 9
239080: RNCC: 5 | RNVC: 9

18 Sep 1984

3040-01-187-3571
Rigid Connecting Link

011873571
12325402: RNCC: 3 | RNVC: 2

21 Aug 1984

3040-01-185-4820
Shouldered Shaft

011854820
70400-01603-101: RNCC: 3 | RNVC: 2

29 Jul 1984

3040-01-183-5100
Rigid Connecting Link

011835100
7533-7002: RNCC: 3 | RNVC: 2
LE162-0010-7002: RNCC: 7 | RNVC: 2

7 Jul 1984

3040-01-180-3505
Shouldered Shaft

011803505
12321030: RNCC: 3 | RNVC: 2

26 May 1984

3040-01-179-9414
Rotating Shaft Eye Bracket

011799414
12305019: RNCC: 3 | RNVC: 2
12305019: RNCC: 5 | RNVC: 2
3040011799414: RNCC: 6 | RNVC: 9
12305019: RNCC: D | RNVC: 9

23 May 1984

3040-01-177-4049
Multiple Disk Brake

011774049
90-002-0323: RNCC: 3 | RNVC: 2

25 Apr 1984

3040-01-174-8190
Bevel Gearshaft

011748190
2-070-024-04: RNCC: 3 | RNVC: 2
2-070-024-04: RNCC: 7 | RNVC: 2

23 Mar 1984

3040-01-168-9873
Linear Actuating Cylinder Piston

011689873
C2841041468: RNCC: 3 | RNVC: 2
10510639: RNCC: 5 | RNVC: 9

30 Dec 1983

3040-01-158-5725
Bell Crank Assembly

011585725
70400-02207-044: RNCC: 3 | RNVC: 2

25 Jul 1983

3040-01-149-9787
Link Mlg Strut Door

011499787
14-40454-2: RNCC: 3 | RNVC: 9
14-40454-2: RNCC: 5 | RNVC: 2
14-40454-2: RNCC: C | RNVC: 1

28 Mar 1983

3040-01-142-8296
Shouldered Shaft

011428296
12312102: RNCC: 3 | RNVC: 2

21 Nov 1982

3040-01-141-6316
Helical Gearshaft

011416316
1W2871: RNCC: 3 | RNVC: 2

3 Nov 1982

3040-01-129-5523
Bevel Gearshaft

011295523
70351-08205-101: RNCC: 3 | RNVC: 2
70351-08205-101: RNCC: 5 | RNVC: 9

8 Apr 1982

3040-01-129-4302
Mechanical Drive Housing

011294302
AR4572400: RNCC: 3 | RNVC: 2
AR-45724: RNCC: 5 | RNVC: 9

7 Apr 1982

3040-01-129-2430
Plate And Pin Assy

011292430
40302-1: RNCC: 3 | RNVC: 2
40302-1: RNCC: 5 | RNVC: 9
40302-1: RNCC: 5 | RNVC: 9

4 Apr 1982

3040-01-129-1229
Rigid Connecting Link

011291229
3269503: RNCC: 3 | RNVC: 2
3269503: RNCC: 5 | RNVC: 2
3269503: RNCC: 5 | RNVC: 9
717124429710: RNCC: 6 | RNVC: 9
3040PL0912274: RNCC: 6 | RNVC: 9

1 Apr 1982

3040-01-129-0896
Rotating Shaft Eye Bracket

011290896
12311366: RNCC: 1 | RNVC: 2
12311366: RNCC: 3 | RNVC: 2

31 Mar 1982

3040-01-128-9534
Manual Control Lever

011289534
12269203: RNCC: 3 | RNVC: 2
12269203: RNCC: 5 | RNVC: 2
12269203: RNCC: 5 | RNVC: 2
3040PL1463461: RNCC: 6 | RNVC: 9
3040011289534: RNCC: 6 | RNVC: 9
12269203: RNCC: 8 | RNVC: 2

29 Mar 1982

3040-01-128-5506
Nonrotating Shaft Eye Bracket

011285506
12311081: RNCC: 3 | RNVC: 2

25 Mar 1982

3040-01-128-0876
Screwlock Shaft

011280876
578R371H08: RNCC: 3 | RNVC: 9
578R371H08: RNCC: 5 | RNVC: 9

11 Mar 1982

3040-01-127-6149
Shouldered Shaft

011276149
1567088: RNCC: 3 | RNVC: 2
7N5899: RNCC: 5 | RNVC: 9
IPD7N5899: RNCC: 5 | RNVC: 9

4 Mar 1982

3040-01-127-3133
Shouldered Shaft

011273133
4N5624: RNCC: 3 | RNVC: 2

27 Feb 1982

3040-01-126-1906
Remote Control Lever

011261906
3N2825: RNCC: 3 | RNVC: 2

6 Feb 1982

3040-01-123-6283
Pawl

011236283
3269436: RNCC: 3 | RNVC: 2
3269436: RNCC: 5 | RNVC: 2
717124429600: RNCC: 6 | RNVC: 9
3040PL0912270: RNCC: 6 | RNVC: 9
3040PL1300393: RNCC: 6 | RNVC: 9
3040011236283: RNCC: 6 | RNVC: 9

16 Dec 1981

3040-01-123-6282
Pawl

011236282
3269438: RNCC: 3 | RNVC: 2
3269438: RNCC: 5 | RNVC: 2
717124429501: RNCC: 6 | RNVC: 9
3040PL0912267: RNCC: 6 | RNVC: 9
3040011236282: RNCC: 6 | RNVC: 9

16 Dec 1981

3040-01-109-1452
Shouldered Shaft

011091452
12292670: RNCC: 3 | RNVC: 2
12292450: RNCC: 5 | RNVC: 9

11 Mar 1981

3040-01-106-1892
Operating Shaft

011061892
04100402: RNCC: 3 | RNVC: 2
212855-1: RNCC: 5 | RNVC: 2
268128: RNCC: 5 | RNVC: 2
A04100402: RNCC: 5 | RNVC: 9

14 Jan 1981

3040-01-099-2492
Bell Crank

010992492
70400-01210-042: RNCC: 3 | RNVC: 2
3040PL1949249: RNCC: 6 | RNVC: 9

15 Aug 1980

3040-01-099-1097
Linear Actuating Cylinder Assembly Parts Kit

010991097
9-752-100164: RNCC: 3 | RNVC: 9
9-752-100164: RNCC: 5 | RNVC: 2

13 Aug 1980

3040-01-096-1812
Shaft Collar

010961812
11584799: RNCC: 3 | RNVC: 2

15 Jun 1980

3040-01-095-7220
Mechanical Drive Housing

010957220
70351-08015-042: RNCC: 3 | RNVC: 2
70351-08015-042: RNCC: 5 | RNVC: 2

5 Jun 1980

3040-01-094-5672
Shouldered Shaft

010945672
33 79501 0014 1: RNCC: 3 | RNVC: 2
337950100141: RNCC: 5 | RNVC: 2
337950100141: RNCC: 5 | RNVC: 2

11 May 1980

3040-01-089-7861
Mechanical Drive Housing

010897861
12524363: RNCC: 3 | RNVC: 2
12524363: RNCC: 5 | RNVC: 2
10126872: RNCC: 6 | RNVC: 9

7 Feb 1980

3040-01-089-0995
Spur Gearshaft

010890995
5034T69P01: RNCC: 3 | RNVC: 2
5034T69P01: RNCC: 5 | RNVC: 9

25 Jan 1980

3040-01-084-2731
Rigid Connecting Link

010842731
4053T11G01: RNCC: 3 | RNVC: 2
4053T11G01: RNCC: 5 | RNVC: 9

13 Oct 1979

3040-01-083-9011
Linear Actuating Cylinder Assembly

010839011
12310541: RNCC: 3 | RNVC: 2
12273248: RNCC: 5 | RNVC: 9
3040010839011: RNCC: 6 | RNVC: 9

4 Oct 1979

3040-01-083-5642
Straight Shaft

010835642
12284018: RNCC: 3 | RNVC: 2
XM69476: RNCC: 5 | RNVC: 9

26 Sep 1979

3040-01-078-1248
Friction Lining

010781248
12281205: RNCC: 3 | RNVC: 2
C200086291: RNCC: 5 | RNVC: 9
12281205: RNCC: 5 | RNVC: 9

9 Jun 1979

3040-01-067-2343
Shouldered Shaft

010672343
12273791: RNCC: 3 | RNVC: 2
XM61391: RNCC: 5 | RNVC: 2

27 Oct 1978

3040-01-061-5740
Rigid Connecting Link

010615740
8763405: RNCC: 3 | RNVC: 2

24 Jun 1978

3040-01-053-4746
Shaft Collar

010534746
1968885: RNCC: 3 | RNVC: 2
9S2261: RNCC: 3 | RNVC: 2
IPD9S2261: RNCC: 5 | RNVC: 9
1968885: RNCC: 5 | RNVC: 9

5 Jan 1978

3040-01-050-2974
Linear Actuating Cylinder Assembly

010502974
12266218: RNCC: 3 | RNVC: 2

4 Nov 1977

3040-01-048-6571
Push-Pull Control Assembly

010486571
74861162: RNCC: 3 | RNVC: 2
4861162-8: RNCC: 5 | RNVC: 2
4861162: RNCC: 5 | RNVC: 2

2 Oct 1977

3040-01-048-0443
Rigid Connecting Link

010480443
53G970720-163: RNCC: 3 | RNVC: 2

17 Sep 1977

3040-01-047-9653
Linear Actuating Cylinder Piston

010479653
12007751: RNCC: 3 | RNVC: 2

16 Sep 1977

3040-01-047-5945
Linear Actuating Cylinder Cap

010475945
12007627: RNCC: 3 | RNVC: 2

10 Sep 1977

3040-01-047-5944
Linear Actuating Cylinder Cap

010475944
12007682: RNCC: 3 | RNVC: 2

10 Sep 1977

3040-01-047-3724
Shouldered Shaft

010473724
841247: RNCC: 3 | RNVC: 2
841247: RNCC: 5 | RNVC: 2
841247: RNCC: 5 | RNVC: 9

5 Sep 1977

3040-01-046-8746
Linear Actuating Cylinder Assembly

010468746
70000-814-132DE: RNCC: 3 | RNVC: 2
T8141: RNCC: 5 | RNVC: 9
C3000-84-140E: RNCC: 5 | RNVC: 9
T8141: RNCC: 5 | RNVC: 9
T8141: RNCC: 5 | RNVC: 9
70000-814-140DE: RNCC: 5 | RNVC: 9
C3000-84-140E: RNCC: 5 | RNVC: 9

25 Aug 1977

3040-01-045-8779
Remote Control Lever

010458779
41003013-101: RNCC: 3 | RNVC: 2
41003013-101: RNCC: 5 | RNVC: 2
41003013: RNCC: 5 | RNVC: 9

9 Aug 1977

3040-01-045-7812
Linear Actuating Cylinder Assembly Parts Kit

010457812
74912039: RNCC: 3 | RNVC: 2

7 Aug 1977

3040-01-045-1863
Linear Actuating Cylinder

010451863
12008051: RNCC: 3 | RNVC: 2

28 Jul 1977

3040-01-044-5398
Linear Actuating Cylinder Head

010445398
12008011: RNCC: 3 | RNVC: 2

15 Jul 1977

3040-01-044-2629
Shouldered Shaft

010442629
12007739: RNCC: 3 | RNVC: 2

9 Jul 1977

3040-01-042-8475
Differential

010428475
33-200-991: RNCC: 3 | RNVC: 2
75515005-1: RNCC: 5 | RNVC: 9
75515005-1: RNCC: 5 | RNVC: 9

16 Jun 1977

3040-01-042-8142
Straight Shaft

010428142
12007825: RNCC: 3 | RNVC: 2

14 Jun 1977

3040-01-041-4585
Rigid Connecting Link

010414585
12008089: RNCC: 3 | RNVC: 2

25 May 1977

3040-01-040-7095
Nonrotating Shaft Eye Bracket

010407095
12008406: RNCC: 3 | RNVC: 2

12 May 1977

3040-01-040-5212
Straight Shaft

010405212
12007824: RNCC: 3 | RNVC: 2

8 May 1977

3040-01-040-3663
Shouldered Shaft

010403663
12008223: RNCC: 3 | RNVC: 2

6 May 1977

3040-01-040-1126
Straight Shaft

010401126
12008206: RNCC: 3 | RNVC: 2

2 May 1977

3040-01-039-2849
Detent Plate

010392849
SM-C-850167: RNCC: 3 | RNVC: 2
SM-C-850167: RNCC: 5 | RNVC: 9
SM-C-850167: RNCC: 5 | RNVC: 9
SM-C-850167: RNCC: 5 | RNVC: 9

17 Apr 1977

3040-01-039-2836
Pawl

010392836
SM-C-850386: RNCC: 3 | RNVC: 2
SM-C-850386: RNCC: 5 | RNVC: 9
SM-C-850386: RNCC: 5 | RNVC: 9

17 Apr 1977

3040-01-039-1108
Rigid Connecting Link

010391108
12008371: RNCC: 3 | RNVC: 2

16 Apr 1977

3040-01-035-2500
Shouldered Shaft

010352500
3024438: RNCC: 3 | RNVC: 2

8 Feb 1977

3040-01-034-7628
Counterbalance Weight

010347628
4155146P004: RNCC: 3 | RNVC: 2

31 Jan 1977

3040-01-033-3626
Friction Lining

010333626
8-004-701-00: RNCC: 3 | RNVC: 9
5-66-8472-00: RNCC: 5 | RNVC: 9

4 Jan 1977

3040-01-032-9271
Shouldered Shaft

010329271
053219: RNCC: 3 | RNVC: 2
888B053219: RNCC: 5 | RNVC: 9
888B053219: RNCC: C | RNVC: 1

24 Dec 1976

3040-01-032-4758
Push-Pull Control Assembly

010324758
271-632-66: RNCC: 3 | RNVC: 2
271-632-66: RNCC: 3 | RNVC: 2
346-029-10: RNCC: 5 | RNVC: 2
346-029-10: RNCC: 5 | RNVC: 2
345-029-14: RNCC: 5 | RNVC: 9
272-445-66: RNCC: 5 | RNVC: 9
70-1426: RNCC: 7 | RNVC: 2
271-632-60: RNCC: C | RNVC: 1
272-445: RNCC: C | RNVC: 1
272-445-60: RNCC: C | RNVC: 1

15 Dec 1976

3040-01-032-3129
Rigid Connecting Link

010323129
3S0602: RNCC: 3 | RNVC: 2
3S0602-00: RNCC: 5 | RNVC: 9

13 Dec 1976

3040-01-029-0192
Cross Shaft

010290192
402432: RNCC: 3 | RNVC: 2

14 Oct 1976

3040-01-028-5258
Hub

010285258
400309: RNCC: 3 | RNVC: 2

6 Oct 1976

3040-01-026-0704
Straight Shaft

010260704
7320394: RNCC: 3 | RNVC: 2
2815006783210: RNCC: 5 | RNVC: 9
3040010260704: RNCC: 6 | RNVC: 9

15 Aug 1976

3040-01-025-0511
Straight Shaft

010250511
40-0018651: RNCC: 3 | RNVC: 2
40-0018601: RNCC: 5 | RNVC: 9
40-0018651-A: RNCC: 5 | RNVC: 9
40-0018651-A: RNCC: 5 | RNVC: 9
40-0018601: RNCC: 5 | RNVC: 9
40-0018651: RNCC: D | RNVC: 9

24 Jul 1976

3040-01-023-7016
Shaft Retaining Plate

010237016
266112: RNCC: 3 | RNVC: 2

24 Jun 1976

3040-01-023-3682
Mechanical Drive Housing

010233682
7973849: RNCC: 3 | RNVC: 2

16 Jun 1976

3040-01-022-6199
Linear Actuating Cylinder Assembly

010226199
3G8070: RNCC: 3 | RNVC: 2
8J8820: RNCC: 5 | RNVC: 2
3G8070: RNCC: 5 | RNVC: 9

31 May 1976

3040-01-021-9476
Linear Actuating Cylinder Assembly

010219476
8J0028: RNCC: 3 | RNVC: 2
8J28: RNCC: 5 | RNVC: 9

21 May 1976

3040-01-021-8853
Remote Control Lever

010218853
65-19472-11: RNCC: 3 | RNVC: 2
65-19472-11: RNCC: 5 | RNVC: 2

21 May 1976

3040-01-021-8143
Linear Actuating Cylinder Assembly

010218143
3G8069: RNCC: 3 | RNVC: 2
8J5538: RNCC: 5 | RNVC: 2

20 May 1976

3040-01-020-7109
Control Cable Stop Assembly

010207109
100-013: RNCC: 3 | RNVC: 9
CC13: RNCC: 5 | RNVC: 9
100013: RNCC: 5 | RNVC: 9

3 May 1976

3040-01-017-9925
Pinion Gear

010179925
212-040-202-3: RNCC: 3 | RNVC: 2
212-040-202-3: RNCC: 5 | RNVC: 2
212-040-202-003: RNCC: 5 | RNVC: 2

19 Mar 1976

3040-01-017-9888
Control Cam

010179888
1555466: RNCC: 3 | RNVC: 2
1555620: RNCC: 5 | RNVC: 9

19 Mar 1976

3040-01-017-6315
Push-Pull Control Assembly

010176315
7824226: RNCC: 3 | RNVC: 2
4824226-7: RNCC: 5 | RNVC: 2

12 Mar 1976

3040-01-017-2755
Linear Actuating Cylinder Assembly

010172755
104254H45: RNCC: 3 | RNVC: 2
104254H45: RNCC: 5 | RNVC: 2
104254H45: RNCC: 5 | RNVC: 9
AG-104254: RNCC: 5 | RNVC: 9
104254: RNCC: 5 | RNVC: 9

5 Mar 1976

3040-01-017-1858
Shaft Collar

010171858
0N089606: RNCC: 3 | RNVC: 2

4 Mar 1976

3040-01-017-0517
Hose Reel Shaft

010170517
29283-101: RNCC: 3 | RNVC: 2
61743: RNCC: 3 | RNVC: 9
33917-019: RNCC: 5 | RNVC: 9

1 Mar 1976

3040-01-016-7990
Rigid Connecting Link

010167990
804221-A000: RNCC: 3 | RNVC: 9
804221: RNCC: D | RNVC: 9

21 Feb 1976

3040-01-016-5708
Counterbalance Weight

010165708
11508656: RNCC: 3 | RNVC: 2
11508656: RNCC: 5 | RNVC: 2
11508656: RNCC: 5 | RNVC: 2

14 Feb 1976

3040-01-016-5073
Breather

010165073
1779011: RNCC: 3 | RNVC: 2
1779011: RNCC: 5 | RNVC: 9
MA103: RNCC: 5 | RNVC: 9
1779011: RNCC: 5 | RNVC: 9
C500Y80D Y685 174 3410 29.728: RNCC: D | RNVC: 9

13 Feb 1976

3040-01-016-3886
Manual Control Lever

010163886
402617: RNCC: 3 | RNVC: 2
402617: RNCC: 5 | RNVC: 9
400610: RNCC: C | RNVC: 1

10 Feb 1976

3040-01-015-5264
Linear Actuating Cylinder Assembly Parts Kit

010155264
SK523: RNCC: 3 | RNVC: 2
BJI-SK-523: RNCC: 5 | RNVC: 2
867210209: RNCC: 5 | RNVC: 9

23 Jan 1976

3040-01-015-3133
Manual Control Lever

010153133
51410A191: RNCC: 3 | RNVC: 2
51410A919: RNCC: 3 | RNVC: 2
51410A919: RNCC: 5 | RNVC: 9
51410A067: RNCC: 5 | RNVC: 9
51410A191: RNCC: 5 | RNVC: 9

17 Jan 1976

3040-01-014-8179
Shouldered Shaft

010148179
57-45150-0101: RNCC: 3 | RNVC: 2
57451500101: RNCC: 3 | RNVC: 2
57451500100: RNCC: 5 | RNVC: 9

6 Jan 1976

3040-01-014-4659
Mechanical Drive Housing

010144659
10911891: RNCC: 3 | RNVC: 2

23 Dec 1975

3040-01-014-4007
Flexible Casing Coupling Nut

010144007
627221312-001: RNCC: 3 | RNVC: 2

23 Dec 1975

3040-01-014-3997
Shaft Collar

010143997
627221326-001: RNCC: 3 | RNVC: 2
627221326: RNCC: D | RNVC: 9

23 Dec 1975

3040-01-014-2553
Pawl

010142553
4080139: RNCC: 3 | RNVC: 2
4080139: RNCC: 3 | RNVC: 9
4080139: RNCC: 5 | RNVC: 9

18 Dec 1975

3040-01-013-4883
Rigid Connecting Link

010134883
14-54430-7: RNCC: 3 | RNVC: 9
14-54430-7: RNCC: C | RNVC: 1

5 Dec 1975

3040-01-013-3214
Counterbalance Weight

010133214
679724-0046: RNCC: 3 | RNVC: 2
679724-46: RNCC: 5 | RNVC: 9

1 Dec 1975

3040-01-013-1622
Counterbalance Weight

010131622
683851-0002: RNCC: 3 | RNVC: 2
683851-2: RNCC: 5 | RNVC: 9

27 Nov 1975

3040-01-013-0657
Straight Shaft

010130657
3131-032: RNCC: 3 | RNVC: 2

22 Nov 1975

3040-01-013-0470
Rotating Shaft Eye Bracket

010130470
401-0180-00: RNCC: 3 | RNVC: 2

22 Nov 1975

3040-01-012-4635
Shouldered Shaft

010124635
11675536: RNCC: 3 | RNVC: 2

11 Nov 1975

3040-01-012-3236
Spur Gearshaft

010123236
3880004-1: RNCC: 3 | RNVC: 2
3880004-1: RNCC: 5 | RNVC: 9
3880004-1: RNCC: 5 | RNVC: 9

9 Nov 1975

3040-01-012-3237
Spur Gearshaft

010123237
3880004-2: RNCC: 3 | RNVC: 2
3880004-2: RNCC: 5 | RNVC: 9
3880004-2: RNCC: 5 | RNVC: 9

9 Nov 1975

3040-01-012-1701
Hub Clamp

010121701
918360-7D: RNCC: 3 | RNVC: 2
3493-1000: RNCC: 5 | RNVC: 2
3463-2: RNCC: 5 | RNVC: 2
3493-1000: RNCC: 5 | RNVC: 9

6 Nov 1975

3040-01-012-1023
Straight Shaft

010121023
10179409: RNCC: 3 | RNVC: 2

5 Nov 1975

3040-01-011-7375
Rigid Connecting Link

010117375
212-001-042-1: RNCC: 3 | RNVC: 2
212-001-042-1: RNCC: 3 | RNVC: 2

26 Oct 1975

3040-01-011-6435
Linear Actuating Cylinder Assembly

010116435
11160: RNCC: 3 | RNVC: 2

26 Oct 1975

3040-01-011-6347
Straight Shaft

010116347
286269B: RNCC: 3 | RNVC: 2
286269: RNCC: 5 | RNVC: 2
286269: RNCC: 5 | RNVC: 9
286269B: RNCC: 5 | RNVC: 9

26 Oct 1975

3040-01-011-4089
Hub Clamp

010114089
CG113-9-16IN DIA: RNCC: 3 | RNVC: 2
153745-3: RNCC: 5 | RNVC: 2
153745-3: RNCC: 5 | RNVC: 2
12618055: RNCC: 5 | RNVC: 9
69121-3: RNCC: 5 | RNVC: 9
153745-3: RNCC: 5 | RNVC: 9
CG1-28: RNCC: 5 | RNVC: 9
CG119: RNCC: 5 | RNVC: 9
310311-5REVA: RNCC: C | RNVC: 1

22 Oct 1975

3040-01-011-0351
Counterbalance Weight

010110351
679724-0047: RNCC: 3 | RNVC: 2
679724-47: RNCC: 5 | RNVC: 9

12 Oct 1975

3040-01-011-0350
Counterbalance Weight

010110350
679724-0048: RNCC: 3 | RNVC: 2
679724-48: RNCC: 5 | RNVC: 9

12 Oct 1975

3040-01-010-9227
Manual Control Lever

010109227
11675415: RNCC: 3 | RNVC: 2

9 Oct 1975

3040-01-010-9109
Counterbalance Weight

010109109
679724-0049: RNCC: 3 | RNVC: 2
679724-49: RNCC: 5 | RNVC: 9

9 Oct 1975

3040-01-010-9092
Counterbalance Weight

010109092
679726-0007: RNCC: 3 | RNVC: 2
679726-7: RNCC: 5 | RNVC: 9

9 Oct 1975

3040-01-010-9099
Linear Actuating Cylinder Assembly Parts Kit

010109099
PMCK-E-14: RNCC: 3 | RNVC: 2
74500: RNCC: 5 | RNVC: 9

9 Oct 1975

3040-01-010-9093
Counterbalance Weight

010109093
679726-0004: RNCC: 3 | RNVC: 2
679726-4: RNCC: 5 | RNVC: 9

9 Oct 1975

3040-01-010-9085
Shaft Retaining Plate

010109085
11675542: RNCC: 3 | RNVC: 2

9 Oct 1975

3040-01-010-6657
Counterbalance Weight

010106657
579-1040-02: RNCC: 3 | RNVC: 2
10130536: RNCC: 6 | RNVC: 9

4 Oct 1975

3040-01-010-3905
Counterbalance Weight

010103905
679726-0006: RNCC: 3 | RNVC: 2
679726-6: RNCC: 5 | RNVC: 9

28 Sep 1975

3040-01-010-3907
Counterbalance Weight

010103907
679724-0056: RNCC: 3 | RNVC: 2
679724-56: RNCC: 5 | RNVC: 9

28 Sep 1975

3040-01-010-3904
Counterbalance Weight

010103904
679726-0005: RNCC: 3 | RNVC: 2
679726-5: RNCC: 5 | RNVC: 9

28 Sep 1975

3040-01-009-8317
Control Cam

010098317
3037-490: RNCC: 3 | RNVC: 2

17 Sep 1975

3040-01-009-8318
Brake Disc

010098318
8-004-701: RNCC: 3 | RNVC: 9
8004-701: RNCC: 5 | RNVC: 9

17 Sep 1975

3040-01-009-8193
Rigid Connecting Link

010098193
3C24413-105: RNCC: 3 | RNVC: 2

17 Sep 1975

3040-01-009-5217
Pump Assembly Shaft

010095217
710596: RNCC: 3 | RNVC: 2

11 Sep 1975

3040-01-009-5046
Drive Housing Assy

010095046
5060302: RNCC: 3 | RNVC: 2

11 Sep 1975

3040-01-009-4266
Remote Control Lever

010094266
4412-074: RNCC: 3 | RNVC: 2

11 Sep 1975

3040-01-009-4273
Straight Shaft

010094273
3188-044: RNCC: 3 | RNVC: 2

11 Sep 1975

3040-01-009-4265
Remote Control Lever

010094265
3839-024: RNCC: 3 | RNVC: 2

11 Sep 1975

3040-01-009-4137
Lever Rigging Shaft

010094137
4620-070: RNCC: 3 | RNVC: 2

11 Sep 1975

3040-01-009-3161
Rigid Connecting Link

010093161
214-076-101-9: RNCC: 3 | RNVC: 2
214-076-101-9: RNCC: 5 | RNVC: 2
214-076-101-9: RNCC: 5 | RNVC: 2

7 Sep 1975

3040-01-009-2143
Mechanical Drive Housing

010092143
11675532: RNCC: 3 | RNVC: 2

5 Sep 1975

3040-01-008-9222
Shouldered Shaft

010089222
69-4532: RNCC: 3 | RNVC: 2

1 Sep 1975

3040-01-008-8893
Shouldered Shaft

010088893
77594500: RNCC: 3 | RNVC: 2

31 Aug 1975

3040-01-008-8727
Hub Clamp

010088727
3323584: RNCC: 3 | RNVC: 2

31 Aug 1975

3040-01-008-6910
Extension Shaft

010086910
384-1120-00: RNCC: 3 | RNVC: 2

29 Aug 1975

3040-01-008-4998
Shouldered Shaft

010084998
10293310: RNCC: 3 | RNVC: 2

25 Aug 1975

3040-01-008-1619
Mechanical Drive Housing

010081619
11675531: RNCC: 3 | RNVC: 2

16 Aug 1975

3040-01-007-9531
Counterbalance Weight

010079531
3323799-3: RNCC: 3 | RNVC: 2
3323799-3: RNCC: 5 | RNVC: 2

15 Aug 1975

3040-01-007-9529
Counterbalance Weight

010079529
3323799-1: RNCC: 3 | RNVC: 2
3323799-1: RNCC: 5 | RNVC: 2
3323799-1: RNCC: 5 | RNVC: 2

15 Aug 1975

3040-01-007-9530
Washer Counterweight

010079530
3323799-2: RNCC: 3 | RNVC: 2
3323799-2: RNCC: 5 | RNVC: 2

15 Aug 1975

3040-01-007-5513
Push-Pull Control Assembly

010075513
3005-075-2073: RNCC: 3 | RNVC: 2
3005-075-0203: RNCC: 5 | RNVC: 2
EE-53535: RNCC: 5 | RNVC: 2
036559-003-0068.0: RNCC: 5 | RNVC: 9
33-B-68: RNCC: 5 | RNVC: 9
33-B-68: RNCC: 5 | RNVC: 9
EE-53535: RNCC: 7 | RNVC: 9

5 Aug 1975

3040-01-007-5390
Counterbalance Weight

010075390
579-1036-02: RNCC: 3 | RNVC: 2

5 Aug 1975

3040-01-007-4154
Counterbalance Weight

010074154
683851&1: RNCC: 3 | RNVC: 2

3 Aug 1975

3040-01-007-4150
Counterbalance Weight

010074150
683851&3: RNCC: 3 | RNVC: 2

3 Aug 1975

3040-01-007-4149
Counterbalance Weight

010074149
683851&4: RNCC: 3 | RNVC: 2

3 Aug 1975

3040-01-007-2896
Straight Shaft

010072896
3441747: RNCC: 3 | RNVC: 2
3441747: RNCC: 5 | RNVC: 2

1 Aug 1975

3040-01-006-7574
Rigid Connecting Link

010067574
14-73909-3: RNCC: 1 | RNVC: 2
14-73909-3: RNCC: 3 | RNVC: 2
14-73909-3: RNCC: 3 | RNVC: 2
SR10514A503: RNCC: 5 | RNVC: 2
SR10514A503: RNCC: 5 | RNVC: 2
14-73909-3: RNCC: 5 | RNVC: 2
6625-1: RNCC: 5 | RNVC: 2

22 Jul 1975

3040-01-006-7575
Rigid Connecting Link

010067575
14-73909-7: RNCC: 1 | RNVC: 2
6625.7: RNCC: 3 | RNVC: 2
SR10515A503: RNCC: 5 | RNVC: 2
SR10515A-503: RNCC: 5 | RNVC: 2
14-73909-7: RNCC: 5 | RNVC: 9
14-73909-7: RNCC: 5 | RNVC: 9

22 Jul 1975

3040-01-006-0172
Control Cam

010060172
338538: RNCC: 3 | RNVC: 2

14 Jul 1975

3040-01-005-6697
Differential Gear Unit

010056697
G303200R1110: RNCC: 3 | RNVC: 2
A203200R110: RNCC: 5 | RNVC: 9
G303200R1110: RNCC: 5 | RNVC: 9

30 Jun 1975

3040-01-004-2649
Wheel Control Parts Kit

010042649
3621931: RNCC: 3 | RNVC: 2
3621931: RNCC: 5 | RNVC: 2

8 Jun 1975

3040-01-004-2137
Spur Segment Gearshaft

010042137
3633422: RNCC: 3 | RNVC: 2
923573C1: RNCC: 5 | RNVC: 9
923573C1: RNCC: 5 | RNVC: 9
7812834: RNCC: 5 | RNVC: 9

29 May 1975

3040-01-003-9813
Shaft

010039813
131199: RNCC: 3 | RNVC: 2
131199: RNCC: 5 | RNVC: 9

15 May 1975

3040-01-003-7314
Ball Joint

010037314
R103: RNCC: 3 | RNVC: 2
EE46896: RNCC: 5 | RNVC: 2
EE46896: RNCC: 5 | RNVC: 9
TYPE R-103: RNCC: 5 | RNVC: 9
SP1000CP: RNCC: 5 | RNVC: 9
00331-0184: RNCC: 5 | RNVC: 9
SP1000: RNCC: 5 | RNVC: 9
00331-0184: RNCC: C | RNVC: 1

3 May 1975

3040-01-003-7320
Shouldered Shaft

010037320
02261-0111: RNCC: 3 | RNVC: 2
811058: RNCC: 5 | RNVC: 9
02261-0111: RNCC: 5 | RNVC: 9
65A81C111: RNCC: 7 | RNVC: 2

3 May 1975

3040-01-003-5073
Flexible Shaft Assembly

010035073
3738511: RNCC: 3 | RNVC: 2

26 Apr 1975

3040-01-003-3017
Bell Crank

010033017
752028: RNCC: 3 | RNVC: 2

16 Apr 1975

3040-00-999-9649
Manual Control Lever

009999649
10908764: RNCC: 3 | RNVC: 2
2510009999649: RNCC: 5 | RNVC: 9

8 Apr 1966

3040-00-999-8745
Body Straight Shaft

009998745
11592737: RNCC: 3 | RNVC: 2
2510009998745: RNCC: 5 | RNVC: 9

30 Mar 1966

3040-00-999-8744
Body Straight Shaft

009998744
11592738: RNCC: 3 | RNVC: 2
2510009998744: RNCC: 5 | RNVC: 9

30 Mar 1966

3040-00-999-5332
Shaft Retaining Plate

009995332
10951332: RNCC: 3 | RNVC: 2
2590009995332: RNCC: 6 | RNVC: 9

11 Mar 1966

3040-00-999-2338
Rigid Connecting Link

009992338
10932811-2: RNCC: 3 | RNVC: 2
2590009992338: RNCC: 5 | RNVC: 9
PN109328112: RNCC: 5 | RNVC: 9
10932811-2: RNCC: 8 | RNVC: 2

27 Apr 1966

3040-00-999-2263
Ball Joint

009992263
102546: RNCC: 3 | RNVC: 2

14 Jan 1966

3040-00-999-2007
Rigid Connecting Link

009992007
1072195: RNCC: 3 | RNVC: 2
1072195: RNCC: 5 | RNVC: 2
10875345: RNCC: 5 | RNVC: 2
2590009992007: RNCC: 6 | RNVC: 9
10875345: RNCC: 8 | RNVC: 2

23 Feb 1966

3040-00-998-7314
Push-Pull Control Assembly

009987314
64-032-36: RNCC: 3 | RNVC: 2
25556: RNCC: 5 | RNVC: 2
D4524-1541: RNCC: 5 | RNVC: 2
64-032-36: RNCC: 5 | RNVC: 9
CNT206: RNCC: 5 | RNVC: 9

29 Nov 1967

3040-00-998-6073
Control Cam

009986073
11578017: RNCC: 3 | RNVC: 2
3050009986073: RNCC: 5 | RNVC: 9
1015009986073: RNCC: 5 | RNVC: 9

27 Nov 1967

3040-00-998-4973
Shaft Collar

009984973
548-6761-002: RNCC: 3 | RNVC: 2

4 Dec 1967

3040-00-998-0132
Rigid Connecting Link

009980132
209-030-541-1: RNCC: 3 | RNVC: 2

16 Nov 1966

3040-00-997-8951
Manual Control Lever

009978951
195304: RNCC: 3 | RNVC: 2
195304: RNCC: 5 | RNVC: 9

14 Nov 1966

3040-00-997-7951
Pawl

009977951
3F31853-105: RNCC: 3 | RNVC: 2
3F31853-105: RNCC: 5 | RNVC: 2

10 Nov 1966

3040-00-997-5042
Rigid Connecting Link

009975042
32-94725-3: RNCC: 3 | RNVC: 2

8 Nov 1966

3040-00-997-4824
Shouldered Shaft

009974824
757-3457-001: RNCC: 3 | RNVC: 2

8 Nov 1966

3040-00-997-2946
Valve Shaft

009972946
58452C: RNCC: 3 | RNVC: 2

11 Apr 1967

3040-00-995-6353
Spur Gearshaft

009956353
54310105-1: RNCC: 3 | RNVC: 9
54310105-1: RNCC: 5 | RNVC: 2
54310105-1: RNCC: 5 | RNVC: 9
54310105-1: RNCC: 5 | RNVC: 9

4 Apr 1967

3040-00-995-3794
Manual Control Lever

009953794
180054: RNCC: 3 | RNVC: 2
180054: RNCC: 5 | RNVC: 9

4 Apr 1967

3040-00-995-2026
Cylinder Head

009952026
570889-1: RNCC: 3 | RNVC: 2

4 Apr 1967

3040-00-994-2785
Straight Shaft

009942785
453908: RNCC: 3 | RNVC: 2
453908: RNCC: 5 | RNVC: 2

30 Mar 1967

3040-00-994-2775
Shouldered Shaft

009942775
453728: RNCC: 3 | RNVC: 2

30 Mar 1967

3040-00-994-2791
Shouldered Shaft

009942791
454094: RNCC: 3 | RNVC: 2
454094: RNCC: 5 | RNVC: 2

30 Mar 1967

3040-00-994-2654
Shouldered Shaft

009942654
453402: RNCC: 3 | RNVC: 2

30 Mar 1967

3040-00-994-0285
Shouldered Shaft

009940285
54220132: RNCC: 3 | RNVC: 9
54220132: RNCC: 5 | RNVC: 9
54220132: RNCC: 5 | RNVC: 9

4 Apr 1967

3040-00-993-6100
Straight Shaft

009936100
2262288: RNCC: 3 | RNVC: 2
L340005202: RNCC: 5 | RNVC: 2
262288: RNCC: 5 | RNVC: 9

28 Mar 1967

3040-00-993-0451
Spur Gearshaft

009930451
972422-1: RNCC: 3 | RNVC: 2

25 Mar 1967

3040-00-992-7712
Spur Gearshaft

009927712
MBEU11714: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-992-4526
Straight Shaft

009924526
10908614: RNCC: 3 | RNVC: 2
2590009924526: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-992-3684
Spur Rece Gearshaft

009923684
1064441-1: RNCC: 3 | RNVC: 2
5800334-1315-000: RNCC: 5 | RNVC: 2
1064422-1: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-992-0952
Shouldered Shaft

009920952
16017: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-991-9082
Gear And Shaft Asse *

009919082
1067587G1: RNCC: 3 | RNVC: 2
1067587: RNCC: 3 | RNVC: 2
1067587-1: RNCC: 3 | RNVC: 2
5800334-1215-000: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-991-7160
Shaft Assembly

009917160
553-2046-003: RNCC: 3 | RNVC: 9

1 Jan 1962

3040-00-991-6029
Output Shaft

009916029
9778BP: RNCC: 3 | RNVC: 2

23 Mar 1967

3040-00-991-2401
Shouldered Shaft

009912401
311D620P1: RNCC: 3 | RNVC: 2
516D824P3: RNCC: 5 | RNVC: 2
311D620P1: RNCC: 5 | RNVC: 9
516D824P3: RNCC: 5 | RNVC: 9
311D620P1: RNCC: 8 | RNVC: 2
516D824P3: RNCC: 8 | RNVC: 2

1 Jan 1962

3040-00-990-9296
Push-Pull Control Assembly

009909296
V08-005-001: RNCC: 3 | RNVC: 2
B8005-08-005FN210: RNCC: 5 | RNVC: 2
538MV003-159: RNCC: 5 | RNVC: 2
538MV3IN13FT3IN: RNCC: 5 | RNVC: 9
3801-13-03-03: RNCC: 5 | RNVC: 9
538MV 3IN 13FT: RNCC: C | RNVC: 1

1 Jan 1962

3040-00-990-3055
Rigid Connecting Link

009903055
209-030-532-1: RNCC: 3 | RNVC: 2

8 Nov 1966

3040-00-989-9790
Straight Shaft

009899790
74971: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-989-7812
Breather

009897812
A15962: RNCC: 3 | RNVC: 2
15962 3-8: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-989-4341
Control Cam

009894341
83842: RNCC: 3 | RNVC: 2
83842: RNCC: 5 | RNVC: 2

4 Nov 1966

3040-00-989-0480
Control Cam

009890480
04258: RNCC: 3 | RNVC: 9
6002-652: RNCC: 5 | RNVC: 2
4258: RNCC: 5 | RNVC: 9
38305: RNCC: 5 | RNVC: 9

2 Nov 1966

3040-00-988-4767
Counterbalance Weight

009884767
534491CL2: RNCC: 3 | RNVC: 2

28 Oct 1966

3040-00-988-4790
Counterbalance Weight

009884790
534516CL2: RNCC: 3 | RNVC: 2

28 Oct 1966

3040-00-988-4789
Counterbalance Weight

009884789
534516CL1: RNCC: 3 | RNVC: 2

28 Oct 1966

3040-00-988-1574
Spur Gearshaft

009881574
697608-1: RNCC: 3 | RNVC: 2

28 Oct 1966

3040-00-987-7473
Push-Pull Control Assembly

009877473
3A2429-1: RNCC: 3 | RNVC: 2
10906260: RNCC: 5 | RNVC: 2
3A2429-2: RNCC: 5 | RNVC: 9

29 Mar 1968

3040-00-987-7398
Inertia Damper

009877398
3857352: RNCC: 3 | RNVC: 2
149831: RNCC: 5 | RNVC: 2
3789413: RNCC: 5 | RNVC: 9
3857352: RNCC: 5 | RNVC: 9
149831: RNCC: 5 | RNVC: 9
3789413: RNCC: 5 | RNVC: 9

28 Oct 1966

3040-00-987-4138
Rigid Connecting Link

009874138
32-62149-301: RNCC: 3 | RNVC: 2
32-62149-301: RNCC: 5 | RNVC: 2

26 Oct 1966

3040-00-987-3408
Shaft Retaining Plate

009873408
B3689-3: RNCC: 3 | RNVC: 9
B3689-3: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-986-9983
Brake Shoe

009869983
27593: RNCC: 3 | RNVC: 9
27593: RNCC: 5 | RNVC: 2
27593: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-986-7598
Linear Actuating Cylinder Piston

009867598
219246: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-986-4201
Spur Gearshaft

009864201
560A37AK: RNCC: 3 | RNVC: 2
560A37AK: RNCC: 3 | RNVC: 9
560A37AK: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-985-4145
Ball Joint

009854145
D103A: RNCC: 3 | RNVC: 2
D103A: RNCC: 3 | RNVC: 9

1 Jan 1962

3040-00-984-1960
Hub Clamp

009841960
L1-8: RNCC: 3 | RNVC: 2
GC503H3: RNCC: 5 | RNVC: 2
QB79050-8: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-983-6918
Linear Actuating Cylinder Piston

009836918
8351058: RNCC: 3 | RNVC: 2
2520009836918: RNCC: 5 | RNVC: 9

19 Oct 1966

3040-00-983-2574
Shouldered Shaft

009832574
V08-010-027: RNCC: 3 | RNVC: 9
EL08-010-027: RNCC: 5 | RNVC: 2
EL08-010-027: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-983-2566
Ball Joint

009832566
111-A-0004: RNCC: 3 | RNVC: 2
B8005-08-008FN11: RNCC: 5 | RNVC: 2
13207E7300FN19: RNCC: 5 | RNVC: 2
13207E5138: RNCC: 5 | RNVC: 2
5000-800A: RNCC: 5 | RNVC: 9
501-4456540 ITE: RNCC: C | RNVC: 1
2730-79 REV E ITEM 6: RNCC: C | RNVC: 1

1 Jan 1962

3040-00-983-0480
Manual Control Lever

009830480
146189: RNCC: 3 | RNVC: 9
146189: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-982-3449
Straight Shaft

009823449
204-070-029-5: RNCC: 3 | RNVC: 2
204-070-029-005: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-981-9995
Rigid Connecting Link

009819995
S6240-61292-22: RNCC: 3 | RNVC: 2
65400-00112-056: RNCC: 5 | RNVC: 2
S6240-61292-22: RNCC: 5 | RNVC: 2
65400-00112-056: RNCC: 8 | RNVC: 2

1 Jan 1962

3040-00-981-6690
Control Cam

009816690
194180: RNCC: 3 | RNVC: 2
194180: RNCC: 5 | RNVC: 2
194180: RNCC: 5 | RNVC: 9

12 Oct 1966

3040-00-980-9554
Rotary Hydraulic-Pneumatic Actuator

009809554
204-070-581-1: RNCC: 3 | RNVC: 2
204-070-581-001: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-980-9293
Rigid Connecting Link

009809293
10516123: RNCC: 3 | RNVC: 2
3040009809293: RNCC: 6 | RNVC: 9

1 Jan 1960

3040-00-980-2946
Shouldered Shaft

009802946
DYLZ142-3: RNCC: 3 | RNVC: 2
DYLZ142-3: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-980-0727
Straight Shaft

009800727
S4-21-U: RNCC: 3 | RNVC: 9
A3-21: RNCC: 5 | RNVC: 2
S4-21: RNCC: 5 | RNVC: 9
09-1-000183: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-979-9720
Straight Shaft

009799720
875C167P1: RNCC: 3 | RNVC: 2
875C167P1: RNCC: 5 | RNVC: 2
875C167P1: RNCC: 5 | RNVC: 2
875C167P1: RNCC: 5 | RNVC: 2
875C167P1: RNCC: 5 | RNVC: 2
875C167P1: RNCC: 5 | RNVC: 2
875C167P1: RNCC: 5 | RNVC: 9
875C167P1: RNCC: 5 | RNVC: 9
875C167P1: RNCC: 8 | RNVC: 2

1 Jan 1963

3040-00-979-6683
Extension Assembly Shaft

009796683
5110-115: RNCC: 3 | RNVC: 2
12449: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-978-9583
Worm Shaft

009789583
8587551: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-978-0623
Control Cam

009780623
9198692: RNCC: 3 | RNVC: 2
9198692: RNCC: 5 | RNVC: 1

1 Jan 1963

3040-00-977-7183
Pivot Shaft

009777183
SP1564-2: RNCC: 3 | RNVC: 2

7 Oct 1966

3040-00-977-3743
Shaft Retaining Plate

009773743
443146-1: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-976-2301
Straight Shaft

009762301
0N088915: RNCC: 3 | RNVC: 2

5 Oct 1966

3040-00-976-2270
Shouldered Shaft

009762270
0N088795-1: RNCC: 3 | RNVC: 2
0N088795: RNCC: D | RNVC: 9

5 Oct 1966

3040-00-976-2103
Manual Control Lever

009762103
163776: RNCC: 3 | RNVC: 2
163776: RNCC: 5 | RNVC: 9
163776: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-976-2086
Manual Control Lever

009762086
164727: RNCC: 3 | RNVC: 2
164727: RNCC: 5 | RNVC: 9
164727: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-975-0192
Control Cam

009750192
BL8559: RNCC: 3 | RNVC: 2

5 Oct 1966

3040-00-974-9876
Manual Control Lever

009749876
70366: RNCC: 3 | RNVC: 9
5018-985: RNCC: 5 | RNVC: 2

5 Oct 1966

3040-00-973-3951
Shaft Collar

009733951
10912612: RNCC: 1 | RNVC: 2
C-133662: RNCC: 3 | RNVC: 2
133662: RNCC: 5 | RNVC: 9
2990009733951: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-973-3347
Rigid Connecting Link

009733347
205-070-944-1: RNCC: 3 | RNVC: 2
205-070-944-001: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-973-1505
Hub Clamp

009731505
SM-B-447575: RNCC: 3 | RNVC: 2
SM-B-447575: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-973-0121
Bell Crank Support

009730121
SC-D-49643: RNCC: 3 | RNVC: 2
SC-D-49643: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-972-8421
Shouldered Shaft

009728421
553023: RNCC: 3 | RNVC: 2
1145PC242: RNCC: 5 | RNVC: 2
553023: RNCC: 5 | RNVC: 9
1145PC242: RNCC: 5 | RNVC: 9
1145PC242: RNCC: 5 | RNVC: 9
553023: RNCC: 5 | RNVC: 9
1145PC242: RNCC: 5 | RNVC: 9
553023: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-972-8428
Shouldered Shaft

009728428
552949: RNCC: 3 | RNVC: 9
1136PC186C: RNCC: 5 | RNVC: 9
552949: RNCC: 5 | RNVC: 9
552949: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-972-8408
Rigid Connecting Link

009728408
552985: RNCC: 3 | RNVC: 9
552985: RNCC: 5 | RNVC: 2
552985: RNCC: 5 | RNVC: 9
552985: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-972-7959
Control Cam

009727959
12253: RNCC: 3 | RNVC: 2
4051559: RNCC: 3 | RNVC: 2
669-4: RNCC: 5 | RNVC: 2
313690R1: RNCC: 5 | RNVC: 9
313690R1: RNCC: 5 | RNVC: 9
4051559: RNCC: 5 | RNVC: 9
4051559: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-972-4369
Push-Pull Control Assembly

009724369
140990-1: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-972-2640
Shouldered Shaft

009722640
3004735: RNCC: 3 | RNVC: 2
10876361: RNCC: 5 | RNVC: 2
3040009722640: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-972-2408
Rigid Connecting Link

009722408
3G11814-105: RNCC: 3 | RNVC: 2

28 Sep 1966

3040-00-971-9668
Spur Gearshaft

009719668
3320-436: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-971-8861
Control Cam

009718861
140542: RNCC: 3 | RNVC: 2
140542: RNCC: 5 | RNVC: 9

28 Sep 1966

3040-00-971-5800
Nonrotating Shaft Eye Bracket

009715800
179310: RNCC: 3 | RNVC: 2
179310: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-971-5795
Extension Shaft

009715795
164732: RNCC: 3 | RNVC: 2
164732: RNCC: 5 | RNVC: 9
164732: RNCC: 5 | RNVC: 9
164732: RNCC: C | RNVC: 1

1 Jan 1962

3040-00-971-5787
Straight Shaft

009715787
164573: RNCC: 3 | RNVC: 2
164573: RNCC: 5 | RNVC: 9
TP164573: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-971-5681
Control Cam

009715681
102745-5: RNCC: 3 | RNVC: 2
102745-5: RNCC: 3 | RNVC: 2
102745-5: RNCC: 5 | RNVC: 9
102745-5: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-971-5628
Control Cam

009715628
102745-2: RNCC: 3 | RNVC: 2
102745-2: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-971-5627
Control Cam

009715627
102745-1: RNCC: 3 | RNVC: 2
102745-1: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-971-5086
Manual Control Lever

009715086
157992: RNCC: 3 | RNVC: 2
157992: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-971-5087
Nonrotating Shaft Eye Bracket

009715087
157993: RNCC: 3 | RNVC: 2
157993: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-971-4759
Pawl

009714759
5914-10: RNCC: 3 | RNVC: 2
7070-7: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-971-4339
Control Cam

009714339
606A108A: RNCC: 3 | RNVC: 2
606A108A: RNCC: 3 | RNVC: 9
606A108A: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-971-2805
Rigid Connecting Link

009712805
32-11578-3: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-971-2050
Spur Gearshaft

009712050
102725: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-971-2047
Spur Gearshaft

009712047
102636: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-971-1428
Spur Gearshaft

009711428
305031: RNCC: 3 | RNVC: 2

25 Sep 1966

3040-00-971-0799
Manual Control Lever

009710799
192459: RNCC: 3 | RNVC: 2
192459: RNCC: 5 | RNVC: 9

25 Sep 1966

3040-00-971-0725
Control Cam

009710725
192580: RNCC: 3 | RNVC: 2

25 Sep 1966

3040-00-971-0232
Spur Gearshaft

009710232
560938: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-969-0249
Film Guide Shoe

009690249
454799: RNCC: 3 | RNVC: 2

8 Jun 1966

3040-00-968-7625
Straight Shaft

009687625
10049065: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-968-7542
Hub Clamp

009687542
10050178: RNCC: 3 | RNVC: 2
C120: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-968-7586
Straight Shaft

009687586
10049674: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-968-1328
Nonrotating Shaft Eye Bracket

009681328
171273: RNCC: 3 | RNVC: 2
171273: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-968-0010
Hub Clamp

009680010
10049882: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-968-0074
Rigid Connecting Link

009680074
10896531: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-968-0023
Remote Control Lever

009680023
10902128: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-967-9206
Breather

009679206
L1831: RNCC: 3 | RNVC: 2
9172207: RNCC: 7 | RNVC: 2

1 Jan 1962

3040-00-967-9002
Pawl

009679002
310061: RNCC: 3 | RNVC: 2
310061: RNCC: 5 | RNVC: 9

23 Sep 1966

3040-00-967-7679
Rigid Connecting Link

009677679
205-060-712-1: RNCC: 3 | RNVC: 2
205-060-712-1: RNCC: 5 | RNVC: 2
205-060-712-001: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-967-3784
Spur Gearshaft

009673784
G6776-142: RNCC: 3 | RNVC: 2
G6776-142: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-967-2535
Rigid Connecting Link

009672535
53-61008-5: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-966-9353
Control Cam

009669353
75887: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-966-7587
Multiple Gears Gearshaft

009667587
545375: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-965-1913
Manual Control Lever

009651913
14711-507-1: RNCC: 3 | RNVC: 2
14711-507: RNCC: 5 | RNVC: 2

27 Feb 1970

3040-00-964-2109
Rigid Connecting Link

009642109
1-160-482-02: RNCC: 3 | RNVC: 9
1-160-482-02: RNCC: C | RNVC: 1

1 Jan 1962

3040-00-963-9053
Control Cam

009639053
10873432: RNCC: 3 | RNVC: 2

6 Jun 1966

3040-00-963-7984
Sold Shaft Assembly

009637984
30393: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-962-9248
Rigid Connecting Link

009629248
32-61008-431: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-962-5933
Shouldered Shaft

009625933
C7041-93: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-962-5934
Shouldered Shaft

009625934
C7041-62: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-961-8744
Spur Gearshaft

009618744
619E714P1: RNCC: 3 | RNVC: 2
619E714P1: RNCC: 5 | RNVC: 9
619E714P1: RNCC: 8 | RNVC: 2
619E714P1: RNCC: C | RNVC: 1

1 Jan 1962

3040-00-961-8747
Spur Gearshaft

009618747
619E715P2: RNCC: 3 | RNVC: 2
619E715P2: RNCC: 5 | RNVC: 2
619E715P2: RNCC: 5 | RNVC: 2
619E715P2: RNCC: 5 | RNVC: 2
619E715P2: RNCC: 5 | RNVC: 2
619E715P2: RNCC: 5 | RNVC: 2
619E715P2: RNCC: 5 | RNVC: 9
619E715P2: RNCC: 5 | RNVC: 9
619E715P2: RNCC: 5 | RNVC: 9
619E715P2: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-961-5084
Flexible Drive Shaft

009615084
RB16727: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-930-2869
Ball Joint

009302869
150-0831: RNCC: 3 | RNVC: 2
150-831: RNCC: 5 | RNVC: 9
150A831: RNCC: 5 | RNVC: 9

9 May 1966

3040-00-869-0768
Straight Shaft

008690768
38037-1: RNCC: 3 | RNVC: 2
869-0768: RNCC: 5 | RNVC: 2
00-869-0768: RNCC: 5 | RNVC: 9

27 Oct 1967

3040-00-850-7614
Rigid Connecting Link

008507614
205-553: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-805-6288
Linear Actuating Cylinder Assembly Parts Kit

008056288
922628: RNCC: 3 | RNVC: 2
922628: RNCC: 5 | RNVC: 2
886519: RNCC: 5 | RNVC: 2
88620: RNCC: 5 | RNVC: 9
886519: RNCC: 5 | RNVC: 9
16VX2: RNCC: C | RNVC: 1
655643: RNCC: C | RNVC: 1

1 Jan 1962

3040-00-787-4273
Shouldered Shaft

007874273
204-040-130-5: RNCC: 3 | RNVC: 2
204-040-130-005: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-755-7383
Shaft Collar

007557383
2064385: RNCC: 3 | RNVC: 2
2064385: RNCC: 5 | RNVC: 2
2064385: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-723-7799
Shaft Collar

007237799
7237799: RNCC: 3 | RNVC: 2
1015007237799: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-689-3401
Linear Actuating Cylinder Cap

006893401
11636275: RNCC: 3 | RNVC: 2
1025006893401: RNCC: 6 | RNVC: 9
3040006893401: RNCC: 6 | RNVC: 9

8 Feb 1971

3040-00-678-4158
Body Hub

006784158
8763023: RNCC: 3 | RNVC: 2
3040006784158: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-625-2984
Bell Crank

006252984
11671038: RNCC: 3 | RNVC: 2
25206252984: RNCC: 5 | RNVC: 9
2520006252984: RNCC: 6 | RNVC: 9

5 Mar 1975

3040-00-600-6713
Governor Shaft

006006713
5154435: RNCC: 3 | RNVC: 2
5154435: RNCC: 5 | RNVC: 9
5154435: RNCC: 5 | RNVC: 9
PC5154435: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-462-2163
Shouldered Shaft

004622163
142916: RNCC: 3 | RNVC: 2

7 May 1969

3040-00-449-3546
Counterbalance Weight

004493546
567-1501-17: RNCC: 3 | RNVC: 2

8 May 1970

3040-00-402-4431
Bell Crank

004024431
8761018: RNCC: 3 | RNVC: 2
2990004024431: RNCC: 5 | RNVC: 9
2990004024431: RNCC: 6 | RNVC: 9

6 Apr 1970

3040-00-402-2547
Shouldered Shaft

004022547
3017107: RNCC: 3 | RNVC: 2
3017107: RNCC: 5 | RNVC: 2

3 Apr 1970

3040-00-396-3116
Hub Clamp

003963116
504-7537-002: RNCC: 3 | RNVC: 2
655367-000: RNCC: 5 | RNVC: 2
SMB178414: RNCC: 5 | RNVC: 2
G50P13504: RNCC: 5 | RNVC: 2
123620-2: RNCC: 5 | RNVC: 2
504-7537-002: RNCC: 5 | RNVC: 2
504-7537-002: RNCC: 5 | RNVC: 9
504-7537-002: RNCC: 5 | RNVC: 9
504-7537-002: RNCC: C | RNVC: 1
504-7537-002REV: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-338-3335
Linear Actuating Cylinder Piston

003383335
051563: RNCC: 3 | RNVC: 2
51563: RNCC: 5 | RNVC: 9
C51563: RNCC: D | RNVC: 9

1 Jan 1961

3040-00-337-9250
Rigid Connecting Link

003379250
7268078: RNCC: 3 | RNVC: 2
7268078: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-334-6180
Manual Control Lever

003346180
SCD647157: RNCC: 3 | RNVC: 2

24 Dec 1973

3040-00-332-8855
Manual Control Lever

003328855
152823: RNCC: 3 | RNVC: 9
152823: RNCC: 5 | RNVC: 2
152823: RNCC: 5 | RNVC: 2
152823: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-332-4565
Body Hub

003324565
129661: RNCC: 3 | RNVC: 2
129661: RNCC: 5 | RNVC: 2
129661: RNCC: 5 | RNVC: 9
129661: RNCC: 5 | RNVC: 9
129661: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-330-4588
Shouldered Shaft

003304588
5193552: RNCC: 3 | RNVC: 2
5193552: RNCC: 5 | RNVC: 2
5193552: RNCC: 5 | RNVC: 9
PC5193552: RNCC: 5 | RNVC: 9
K5193552: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-328-8862
Worm Shaft

003288862
12Y4509: RNCC: 3 | RNVC: 2
M305791: RNCC: 5 | RNVC: 2
7954562: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-325-1663
Counterbalance Weight

003251663
142841: RNCC: 3 | RNVC: 2
142841: RNCC: 5 | RNVC: 9
142841: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-322-9929
Hub Clamp

003229929
SMB170763: RNCC: 3 | RNVC: 2
C447: RNCC: 3 | RNVC: 2
504-7576-002: RNCC: 3 | RNVC: 2
G50P13772-1: RNCC: 5 | RNVC: 2
SMB170763: RNCC: 5 | RNVC: 2
504-7576-002: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-320-1514
Shaft Retaining Plate

003201514
00070-4529: RNCC: 3 | RNVC: 2
70-4529: RNCC: 5 | RNVC: 2
70-4529: RNCC: 5 | RNVC: 9
00070-4529: RNCC: 5 | RNVC: 9
70-4529: RNCC: 5 | RNVC: 9

11 Nov 1973

3040-00-318-5356
Manual Control Lever

003185356
153252: RNCC: 3 | RNVC: 2
153252: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-317-7378
Remote Control Lever

003177378
030052: RNCC: 3 | RNVC: 2
03040-93: RNCC: 5 | RNVC: 2
030052: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-316-2279
Direct Current Motor

003162279
DYLM80: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-310-7852
Throttle Cont Shaft

003107852
5174124: RNCC: 3 | RNVC: 2
5174124: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-309-2809
Shaft Collar

003092809
153634: RNCC: 3 | RNVC: 2
153634: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-309-2808
Control Cam

003092808
151443: RNCC: 3 | RNVC: 9
151443: RNCC: 5 | RNVC: 2
151443: RNCC: 5 | RNVC: 2
151443: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-308-0318
Manual Control Lever

003080318
1509374T: RNCC: 3 | RNVC: 2
150937: RNCC: 3 | RNVC: 2
150937: RNCC: 5 | RNVC: 2
150937: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-306-7991
Straight Shaft

003067991
A3-32: RNCC: 3 | RNVC: 2
SS133: RNCC: 5 | RNVC: 2
S4-32: RNCC: 5 | RNVC: 9
450D001177-2: RNCC: C | RNVC: 1

19 Oct 1973

3040-00-304-3016
Operating Link Rod

003043016
339409L: RNCC: 3 | RNVC: 2
339409L: RNCC: 5 | RNVC: 2
339409L: RNCC: 5 | RNVC: 2
339409L: RNCC: 5 | RNVC: 9
339409L: RNCC: 5 | RNVC: 9
339409L: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-301-7741
Shouldered Shaft

003017741
8332554: RNCC: 3 | RNVC: 2
3880Y545: RNCC: 5 | RNVC: 9
2520003017741: RNCC: 5 | RNVC: 9
A3880Y545: RNCC: 5 | RNVC: 9
2520003017741: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-294-7792
Shaft Collar

002947792
1242: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-294-7390
Shaft Collar

002947390
SCB69522-2: RNCC: 3 | RNVC: 2
50209: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-287-9168
Shouldered Shaft

002879168
2660-1635-01: RNCC: 3 | RNVC: 2
212-704-062PC1: RNCC: 5 | RNVC: 1
2660-1635-01: RNCC: 5 | RNVC: 9

12 Sep 1973

3040-00-287-3524
Ball Joint

002873524
431514: RNCC: 3 | RNVC: 9
431514: RNCC: 5 | RNVC: 2
431514: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-00-287-3522
Ball Joint

002873522
442715: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-279-2792
Mechanical Drive Housing

002792792
222581-2: RNCC: 3 | RNVC: 2

8 Aug 1973

3040-00-275-7022
Ball Joint

002757022
6Q88D5: RNCC: 3 | RNVC: 2
13218E0240-5: RNCC: 5 | RNVC: 2
442716: RNCC: 5 | RNVC: 2
LA780-5: RNCC: 5 | RNVC: 9
P67051: RNCC: 5 | RNVC: 9
442716: RNCC: 5 | RNVC: 9
B109: RNCC: 5 | RNVC: 9
442716: RNCC: C | RNVC: 1

1 Jan 1961

3040-00-262-8220
Remote Control Lever

002628220
71-4620: RNCC: 3 | RNVC: 2
04306-0636: RNCC: 5 | RNVC: 9

13 Jul 1973

3040-00-261-9594
Rigid Connecting Link

002619594
71-4752: RNCC: 3 | RNVC: 2
04306-8000: RNCC: 5 | RNVC: 9

13 Jul 1973

3040-00-259-6612
Hub Clamp

002596612
504-7578-002: RNCC: 3 | RNVC: 2
G50P14115: RNCC: 5 | RNVC: 2
504-7578-002: RNCC: 5 | RNVC: 2
5047578002: RNCC: 5 | RNVC: 2
504-7578-002: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-257-0820
Hub Clamp

002570820
45550-003-31: RNCC: 3 | RNVC: 2
X117C8: RNCC: 5 | RNVC: 2

19 Mar 1971

3040-00-256-2407
Body Hub

002562407
74035849: RNCC: 3 | RNVC: 2
4025068-0: RNCC: 5 | RNVC: 9
4035849: RNCC: 5 | RNVC: 9
7435849: RNCC: 5 | RNVC: 9

15 Mar 1971

3040-00-252-3330
Control Cam

002523330
186249: RNCC: 3 | RNVC: 2
186249: RNCC: 5 | RNVC: 9

17 Jun 1970

3040-00-251-2259
Manual Control Lever

002512259
10915013: RNCC: 3 | RNVC: 2

11 Jul 1969

3040-00-250-9274
Spur Gearshaft

002509274
5602-130: RNCC: 3 | RNVC: 9
5602-130: RNCC: 5 | RNVC: 9

9 Jul 1969

3040-00-246-3927
Straight Shaft

002463927
SS185: RNCC: 3 | RNVC: 2
A8-9: RNCC: 3 | RNVC: 2
412576-8: RNCC: 5 | RNVC: 2
G5-14: RNCC: 5 | RNVC: 2
S1-11: RNCC: 5 | RNVC: 9
412576: RNCC: 5 | RNVC: 9

26 Feb 1969

3040-00-243-9777
Push-Pull Control Assembly

002439777
5203CC60: RNCC: 3 | RNVC: 2
77430472: RNCC: 3 | RNVC: 2
433372: RNCC: 3 | RNVC: 2
463510C1: RNCC: 5 | RNVC: 2
344266C91: RNCC: 5 | RNVC: 9
43C: RNCC: 5 | RNVC: 9
77430472: RNCC: 5 | RNVC: 9
463510C1: RNCC: 5 | RNVC: 9
463510C1: RNCC: 5 | RNVC: 9

12 Mar 1971

3040-00-238-5597
Remote Control Lever

002385597
8758697: RNCC: 3 | RNVC: 2

6 Nov 1970

3040-00-233-9274
Actuator Clutch Shoe

002339274
NYLC1235: RNCC: 3 | RNVC: 2

5 Mar 1971

3040-00-231-6533
Ball Joint

002316533
4745363: RNCC: 3 | RNVC: 2
74745363: RNCC: 5 | RNVC: 2
74745363-7: RNCC: 5 | RNVC: 2

19 Oct 1970

3040-00-231-0215
Rigid Connecting Link

002310215
8758691: RNCC: 3 | RNVC: 2

14 Oct 1970

3040-00-228-7186
Shaft Retaining Plate

002287186
2466882: RNCC: 3 | RNVC: 9
2466882: RNCC: 5 | RNVC: 2

7 Feb 1969

Load More Results