What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 136 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 136 of 300

3040-00-450-7864
Rigid Connecting Link

004507864
212-060-724-021: RNCC: 3 | RNVC: 2
212-060-724-21: RNCC: 5 | RNVC: 2
212-060-724-021: RNCC: 5 | RNVC: 2
212-060-724-21: RNCC: 5 | RNVC: 2

17 Dec 1969

3040-00-456-1142
Shouldered Shaft

004561142
10935499: RNCC: 3 | RNVC: 2
10935499: RNCC: 5 | RNVC: 9

23 Apr 1969

3040-00-453-9381
Rigid Connecting Link

004539381
8619844: RNCC: 3 | RNVC: 2

11 Apr 1969

3040-00-457-8792
Ball Joint

004578792
111B0027-3: RNCC: 3 | RNVC: 2
111-B-0027-3: RNCC: 5 | RNVC: 2

30 Apr 1969

3040-00-463-7766
Shouldered Shaft

004637766
695045: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-464-0985
Rigid Connecting Link

004640985
10225468: RNCC: 3 | RNVC: 2
3040004640985: RNCC: 5 | RNVC: 9
433-1934: RNCC: 6 | RNVC: 9
3040004640985: RNCC: 6 | RNVC: 9
10225468: RNCC: D | RNVC: 9

12 May 1969

3040-00-463-7759
Shouldered Shaft

004637759
697262: RNCC: 3 | RNVC: 2
697262: RNCC: 5 | RNVC: 2
697262: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-00-467-8205
Shouldered Shaft

004678205
754-1-27079: RNCC: 3 | RNVC: 2
754-1-28649: RNCC: 3 | RNVC: 2

8 May 1970

3040-00-476-9871
Bell Crank

004769871
K659642-9: RNCC: 3 | RNVC: 2
K659642-7: RNCC: 5 | RNVC: 2
K659642-5: RNCC: 5 | RNVC: 2
3040PL0136833: RNCC: 6 | RNVC: 9

11 Jun 1971

3040-00-476-4483
Inertia Damper

004764483
10032226-101: RNCC: 3 | RNVC: 2

4 Jun 1971

3040-00-476-9332
Straight Shaft

004769332
7404666: RNCC: 3 | RNVC: 2

11 Jun 1971

3040-00-480-1881
Thrust Shoe

004801881
S2105K: RNCC: 3 | RNVC: 2
SF10421PC16: RNCC: 5 | RNVC: 9

12 Jun 1974

3040-00-481-2676
Linear Actuating Cylinder Assembly Parts Kit

004812676
RG2AHL0405: RNCC: 3 | RNVC: 2

11 Sep 1970

3040-00-483-1853
Bell Crank

004831853
MBEU1874GRU5: RNCC: 3 | RNVC: 2

1 Feb 1971

3040-00-484-1593
Straight Shaft

004841593
57415410170: RNCC: 3 | RNVC: 2

30 May 1969

3040-00-485-7865
Spur Gearshaft

004857865
817013-1: RNCC: 3 | RNVC: 2

19 Jun 1974

3040-00-491-6317
Shouldered Shaft

004916317
65355-12122-103: RNCC: 3 | RNVC: 2
65355-12122-102: RNCC: 5 | RNVC: 9
65355-12122-103: RNCC: 5 | RNVC: 9
65355-12122-103: RNCC: 5 | RNVC: 9
65355-12122-101: RNCC: 5 | RNVC: 9
65355-12122-101: RNCC: 5 | RNVC: 9

4 Oct 1972

3040-00-490-9854
Spur Gearshaft

004909854
5007T11P01: RNCC: 3 | RNVC: 2
5007T11P01: RNCC: 5 | RNVC: 2
5007T11P01: RNCC: 5 | RNVC: 2

14 Mar 1972

3040-00-493-8706
Flexible Shaft Assembly

004938706
02261-0086: RNCC: 3 | RNVC: 2
446900-7F014: RNCC: 5 | RNVC: 9
02261-0086: RNCC: 5 | RNVC: 9
65A81-C86: RNCC: 7 | RNVC: 2

2 Oct 1970

3040-00-497-6598
Gland Cartridge Parts Kit

004976598
RG2AHL0101: RNCC: 3 | RNVC: 2
RG2AHL101: RNCC: 5 | RNVC: 9
RG2AHL101: RNCC: 5 | RNVC: 9

22 Mar 1972

3040-00-496-0199
Bell Crank

004960199
212-001-312-1: RNCC: 3 | RNVC: 2

26 Sep 1969

3040-00-498-3815
Rotating Shaft Eye Bracket

004983815
8348817: RNCC: 3 | RNVC: 2

8 Oct 1969

3040-00-504-8913
Shouldered Shaft

005048913
3005285: RNCC: 3 | RNVC: 2
10876364: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-512-9223
Straight Shaft

005129223
7974962: RNCC: 3 | RNVC: 2
48B2071: RNCC: 5 | RNVC: 2
7740-22-4: RNCC: 5 | RNVC: 2
102707R1: RNCC: 5 | RNVC: 9
102707R1: RNCC: 5 | RNVC: 9
15540: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-523-6252
Pawl

005236252
5236252: RNCC: 3 | RNVC: 2
1015005236252: RNCC: 6 | RNVC: 9
3040005236252: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-525-3415
Shouldered Shaft

005253415
9-61709-4: RNCC: 3 | RNVC: 2
9-61709-2: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-518-6267
Counterbalance Weight

005186267
4044395: RNCC: 3 | RNVC: 2
4044395: RNCC: 3 | RNVC: 2

13 Aug 1974

3040-00-525-7905
Landing Gear Shaft Assembly

005257905
50-810240: RNCC: 3 | RNVC: 2
50-810240: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-528-1522
Rigid Connecting Link

005281522
6-74679: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-529-1691
Flexible Drive Shaft

005291691
2285: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-554-7437
Rigid Connecting Link

005547437
339399-5: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-567-7618
Linear Actuating Cylinder Assembly Parts Kit

005677618
KD5914-SPEACIAL: RNCC: 3 | RNVC: 2
KD5914-SPEACIAL: RNCC: 5 | RNVC: 9
1131: RNCC: 5 | RNVC: 9
KD1131: RNCC: 5 | RNVC: 9
KD5914: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-570-7132
Rigid Connecting Link

005707132
339399-3: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-572-8724
Shouldered Shaft

005728724
10932788: RNCC: 3 | RNVC: 2
300993: RNCC: 5 | RNVC: 2
2520005728724: RNCC: 5 | RNVC: 9
K4278: RNCC: 8 | RNVC: 1
10932788: RNCC: 8 | RNVC: 2

1 Jan 1961

3040-00-574-5740
Shouldered Shaft

005745740
13216E6142-1: RNCC: 3 | RNVC: 2
13216E6142-1: RNCC: 5 | RNVC: 9

11 Dec 1974

3040-00-575-7225
Rigid Connecting Link

005757225
120-63756-1: RNCC: 3 | RNVC: 2

11 Dec 1974

3040-00-580-4868
Hub Clamp

005804868
L1-2: RNCC: 3 | RNVC: 2
LT2: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-588-2155
Manual Control Lever

005882155
357015-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-593-4049
Control Cam

005934049
5-83012-1: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-593-7321
Rigid Connecting Link

005937321
63-1446-2: RNCC: 3 | RNVC: 2
63-1446: RNCC: 5 | RNVC: 9
63-1446-0: RNCC: 5 | RNVC: 9
63-1446-2: RNCC: 5 | RNVC: 9
63-1446: RNCC: 5 | RNVC: 9
30-2512: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-601-3504
Bell Crank

006013504
800163: RNCC: 3 | RNVC: 9
800163: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-601-3507
Rigid Connecting Link

006013507
800165-2: RNCC: 3 | RNVC: 9
800165-2: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-602-6518
Shouldered Shaft

006026518
4F53723-101A: RNCC: 3 | RNVC: 9
4F53723-101A: RNCC: 5 | RNVC: 2
4F53723-101A: RNCC: 5 | RNVC: 9
4F53723: RNCC: D | RNVC: 9

24 Jan 1968

3040-00-607-2813
Spur Gearshaft

006072813
105D3527: RNCC: 3 | RNVC: 2

30 Jan 1975

3040-00-611-6203
Mechanical Drive Housing

006116203
11671393: RNCC: 3 | RNVC: 2

5 Feb 1975

3040-00-611-7558
Remote Control Lever

006117558
26-2413: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-619-9671
Bell Crank

006199671
10862319: RNCC: 3 | RNVC: 2
2530006199671: RNCC: 5 | RNVC: 9
2530006199671: RNCC: 6 | RNVC: 9

22 Feb 1975

3040-00-625-4418
Brake Band And Lining

006254418
7538731: RNCC: 3 | RNVC: 2
304456: RNCC: 5 | RNVC: 2
2286139: RNCC: 5 | RNVC: 9
1314N2: RNCC: 5 | RNVC: 9
911233: RNCC: 5 | RNVC: 9
2286139: RNCC: C | RNVC: 1

1 Jan 1961

3040-00-650-9710
Booster Rod Assembly

006509710
354641-2: RNCC: 3 | RNVC: 2
354641-2: RNCC: 5 | RNVC: 2
354641-2: RNCC: 5 | RNVC: 2
354641-2: RNCC: 5 | RNVC: 2
354641-2: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-651-0092
Rigid Connecting Link

006510092
519630: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-651-3806
Shouldered Shaft

006513806
514749: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-652-1155
Rigid Connecting Link

006521155
341016-501: RNCC: 3 | RNVC: 2
341016-501: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-652-1154
Rigid Connecting Link

006521154
341016-502: RNCC: 3 | RNVC: 2
341016-502: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-656-6154
Rigid Connecting Link

006566154
9-55623-4: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-674-4942
Spur Gearshaft

006744942
354474: RNCC: 3 | RNVC: 2
354474: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-674-6957
Compression Release Shaft

006746957
5195809: RNCC: 3 | RNVC: 2
5195523: RNCC: 5 | RNVC: 9
5195523: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-675-2694
Control Cam

006752694
35-7227: RNCC: 3 | RNVC: 2
35-7227: RNCC: 5 | RNVC: 2
35-7227: RNCC: 5 | RNVC: 2
35-7227: RNCC: 5 | RNVC: 2
35-7227: RNCC: 5 | RNVC: 2
35-7227: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-676-1348
Piston Ring Set

006761348
665522: RNCC: 3 | RNVC: 2
665522: RNCC: 5 | RNVC: 2
665522: RNCC: 5 | RNVC: 2
665522: RNCC: 5 | RNVC: 9
665522: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-678-0530
Manual Control Lever

006780530
8765895: RNCC: 3 | RNVC: 2
1025-00-678-0530M: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-678-3129
Shouldered Shaft

006783129
10862047: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-678-8440
Straight Shaft

006788440
10942813: RNCC: 3 | RNVC: 2
2930006788440: RNCC: 5 | RNVC: 9
K0448: RNCC: 8 | RNVC: 1
10942813: RNCC: 8 | RNVC: 2

1 Jan 1961

3040-00-689-3413
Accumulator Cap

006893413
11636260: RNCC: 3 | RNVC: 2
1025006893413: RNCC: 5 | RNVC: 9

8 Feb 1971

3040-00-689-5158
Shaft Collar

006895158
100998: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-690-1225
Straight Shaft

006901225
10867135: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-712-0710
Shouldered Shaft

007120710
60-3346: RNCC: 3 | RNVC: 2
60-3346: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-715-4356
Rigid Connecting Link

007154356
2-40455-1: RNCC: 3 | RNVC: 2
2-40455-1: RNCC: 5 | RNVC: 2
2-40455-1: RNCC: 5 | RNVC: 9
2-40455-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-716-1846
Counterbalance Weight

007161846
133772-03: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-716-1827
Counterbalance Weight

007161827
133772-01: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-716-1829
Counterbalance Weight

007161829
133772-02: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-719-4975
Shouldered Shaft

007194975
96241-1: RNCC: 3 | RNVC: 2
96241-1: RNCC: 5 | RNVC: 9
96241-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-719-9311
Straight Shaft

007199311
292C881P9: RNCC: 3 | RNVC: 2
292C881P9: RNCC: 5 | RNVC: 2
292C881P9: RNCC: 5 | RNVC: 9
292C881P009: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-720-1014
Rigid Connecting Link

007201014
53B22097-2: RNCC: 3 | RNVC: 2
60A2664: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-723-6178
Counterbalance Weight

007236178
841B724P2: RNCC: 3 | RNVC: 2
841B724P2: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-727-1721
Straight Shaft

007271721
738079-01: RNCC: 3 | RNVC: 2

14 Feb 1968

3040-00-731-9800
Counterbalance Weight

007319800
429203CL10: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-735-4263
Shaft Retaining Plate

007354263
8351668: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-736-0224
Mechanical Drive Housing

007360224
8351271: RNCC: 3 | RNVC: 2
8351271: RNCC: 5 | RNVC: 9
3040007360224: RNCC: 5 | RNVC: 9
8351271: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-740-9950
Shouldered Shaft

007409950
302295: RNCC: 3 | RNVC: 2
7964196: RNCC: 5 | RNVC: 2
7409950: RNCC: 5 | RNVC: 2
KC2710: RNCC: 5 | RNVC: 9
M23000: RNCC: 5 | RNVC: 9
111964R1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-757-1441
Rigid Connecting Link

007571441
69-3216: RNCC: 3 | RNVC: 2
69-3216: RNCC: 5 | RNVC: 2
69-3216: RNCC: 5 | RNVC: 2
69-3216: RNCC: 5 | RNVC: 2
69-3216: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-758-9372
Bell Crank

007589372
65-11820-2: RNCC: 3 | RNVC: 2
65-11820-2: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-759-5487
Spur Gearshaft

007595487
4067-21: RNCC: 3 | RNVC: 2
4067-21: RNCC: 3 | RNVC: 9
4067D21: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-766-1261
Shouldered Shaft

007661261
392692: RNCC: 3 | RNVC: 2
392692: RNCC: 5 | RNVC: 2
392692: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-770-8395
Shouldered Shaft

007708395
805-1626022PC19: RNCC: 3 | RNVC: 2
805-1626022: RNCC: D | RNVC: 9

1 Jan 1962

3040-00-776-0431
Shouldered Shaft

007760431
31220-1016: RNCC: 3 | RNVC: 2
AP31220-1016: RNCC: 5 | RNVC: 9
31220-1016: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-776-7706
Shouldered Shaft

007767706
7767706: RNCC: 3 | RNVC: 2
6700769: RNCC: 5 | RNVC: 9
2520007767706: RNCC: 5 | RNVC: 9
6700769: RNCC: 5 | RNVC: 9
6700769: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-776-8063
Worm Shaft

007768063
6762340: RNCC: 3 | RNVC: 2
7768063: RNCC: 5 | RNVC: 2
2520007768063: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-783-4655
Shouldered Shaft

007834655
113130: RNCC: 3 | RNVC: 2
113130: RNCC: 5 | RNVC: 2
113130: RNCC: 5 | RNVC: 9
113130: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-786-6441
Shaft Retaining Plate

007866441
5120753: RNCC: 3 | RNVC: 2
2815007866441: RNCC: 5 | RNVC: 9
5120753: RNCC: 5 | RNVC: 9
PC5120753: RNCC: 5 | RNVC: 9
5120753: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-790-6777
Hub Clamp

007906777
L1-9: RNCC: 3 | RNVC: 2

18 Feb 1999

3040-00-789-7783
Bell Crank

007897783
114C3318-20: RNCC: 3 | RNVC: 2
114C3318-1: RNCC: 5 | RNVC: 2
114C3318-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-794-8964
Helical Gearshaft

007948964
139702-02: RNCC: 3 | RNVC: 9
139702-02: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-795-4053
Shaft Collar

007954053
37B201343P101: RNCC: 3 | RNVC: 2
37B201343P101: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-797-4245
Control Cam

007974245
1382190: RNCC: 3 | RNVC: 2
1382190: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-803-6716
Linear Actuating Cylinder Assembly

008036716
4970-010: RNCC: 3 | RNVC: 2
4970-010: RNCC: 5 | RNVC: 2
4970: RNCC: 5 | RNVC: 9
4970B1-8 5-8: RNCC: 5 | RNVC: 9
4970-010: RNCC: 5 | RNVC: 9
4690003: RNCC: 5 | RNVC: 9
4970B: RNCC: 5 | RNVC: 9
343AS312: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-806-6381
Rigid Connecting Link

008066381
826994-1: RNCC: 3 | RNVC: 2
826994-1: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-819-3021
Spur Gearshaft

008193021
687446: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-821-4396
Actuator Shaft

008214396
41A135: RNCC: 3 | RNVC: 9
41A135: RNCC: 5 | RNVC: 2
41A135: RNCC: 5 | RNVC: 9
41A135: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-821-4422
Actuator Shaft

008214422
41A144: RNCC: 3 | RNVC: 9
41A144: RNCC: 5 | RNVC: 2
41A144: RNCC: 5 | RNVC: 9
41A144: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-830-5911
Counterbalance Weight

008305911
393514CL10: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-830-5918
Counterbalance Weight

008305918
393514CL3: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-837-1887
Counterbalance Weight

008371887
3005290CLC: RNCC: 3 | RNVC: 2

7 Dec 1966

3040-00-836-8338
Manual Control Lever

008368338
13213E5285: RNCC: 1 | RNVC: 2
D67979-2: RNCC: 3 | RNVC: 9
D67979: RNCC: 5 | RNVC: 9
MTTWINE32888: RNCC: 5 | RNVC: 9
D67979-2: RNCC: C | RNVC: 1
67979-002: RNCC: C | RNVC: 1

5 Dec 1966

3040-00-449-7172
Linear Actuating Cylinder

004497172
13214E0023-4: RNCC: 3 | RNVC: 2
981060: RNCC: 5 | RNVC: 9

10 Dec 1969

3040-00-453-8156
Worm Wheel Gearshaft

004538156
531579-1: RNCC: 3 | RNVC: 2

9 Apr 1969

3040-00-454-1031
Manual Control Lever

004541031
4C27007-105D: RNCC: 3 | RNVC: 2
4C27007-105C: RNCC: 5 | RNVC: 2

11 Apr 1969

3040-00-455-9437
Shouldered Shaft

004559437
10225491: RNCC: 3 | RNVC: 2
10225491: RNCC: 5 | RNVC: 1
433-1874: RNCC: 6 | RNVC: 9
1440004559437: RNCC: 6 | RNVC: 9

21 Apr 1969

3040-00-454-1030
Manual Control Lever

004541030
4C27007-103D: RNCC: 3 | RNVC: 2
4C27007-103C: RNCC: 5 | RNVC: 2

11 Apr 1969

3040-00-457-0480
Rigid Connecting Link

004570480
10911339: RNCC: 3 | RNVC: 2
3040004570480: RNCC: 6 | RNVC: 9

28 Apr 1969

3040-00-460-2959
Rigid Connecting Link

004602959
209-001-074-1: RNCC: 3 | RNVC: 2

5 Jan 1970

3040-00-460-5065
Counterbalance Weight

004605065
69356-301-7: RNCC: 3 | RNVC: 2

7 Jan 1970

3040-00-463-7695
Worm Shaft

004637695
698093: RNCC: 3 | RNVC: 2
698093: RNCC: 5 | RNVC: 9
694631: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-468-1936
Spur Gearshaft

004681936
65725: RNCC: 3 | RNVC: 2

17 Aug 1970

3040-00-469-9558
Mechanical Drive Housing

004699558
364381-1: RNCC: 3 | RNVC: 2
364381-1: RNCC: 5 | RNVC: 9

28 Jan 1970

3040-00-470-8615
Manual Control Lever

004708615
4N12726-101A: RNCC: 3 | RNVC: 2

30 Jan 1970

3040-00-480-5873
Thrust Bearing Shoe

004805873
13 1-2 5064-11: RNCC: 3 | RNVC: 2
465064PC11: RNCC: 5 | RNVC: 2
131-2-5064-11: RNCC: 5 | RNVC: 9

2 Sep 1970

3040-00-484-0836
Shouldered Shaft

004840836
10191261: RNCC: 3 | RNVC: 2
10191261: RNCC: 5 | RNVC: 1
433-1901: RNCC: 6 | RNVC: 9

30 May 1969

3040-00-479-8052
Shaft Retaining Plate

004798052
780023-2: RNCC: 3 | RNVC: 2
715644-2: RNCC: 5 | RNVC: 2

8 Mar 1972

3040-00-488-8389
Friction Lining Set

004888389
C-934-0050P: RNCC: 3 | RNVC: 9
C-934-2-PR: RNCC: 5 | RNVC: 9
934: RNCC: 5 | RNVC: 9

18 May 1970

3040-00-489-6575
Straight Shaft

004896575
4F55051-101A: RNCC: 3 | RNVC: 2

25 May 1970

3040-00-488-3814
Throttle Shaft

004883814
2526419: RNCC: 3 | RNVC: 2
2526419: RNCC: 5 | RNVC: 9

4 Jun 1969

3040-00-490-9845
Bevel Gearshaft

004909845
5006T93P01: RNCC: 3 | RNVC: 2

14 Mar 1972

3040-00-496-0201
Bell Crank

004960201
212-001-710-001: RNCC: 3 | RNVC: 2
212-001-710-1: RNCC: 5 | RNVC: 9
212-001-710-1: RNCC: 5 | RNVC: 9

26 Sep 1969

3040-00-499-5489
Manual Control Lever

004995489
205-030-727-1: RNCC: 3 | RNVC: 2

23 Jun 1971

3040-00-499-0854
Bell Crank Support

004990854
4C51074-103A: RNCC: 3 | RNVC: 2
4C51074-101A: RNCC: C | RNVC: 1

13 Oct 1969

3040-00-499-0613
Rigid Connecting Link

004990613
212-060-724-37: RNCC: 3 | RNVC: 2
212-060-724-037: RNCC: 5 | RNVC: 2
212-060-724-37: RNCC: 5 | RNVC: 2

13 Oct 1969

3040-00-507-9981
Flexible Shaft Assembly Core

005079981
M10215-1F417: RNCC: 2 | RNVC: 2
MIL-DTL-10215: RNCC: 4 | RNVC: 1
1582156: RNCC: 5 | RNVC: 1
M-10215-1F4-17: RNCC: 5 | RNVC: 1
MIL-S-10215: RNCC: 5 | RNVC: 9
MS51072-17: RNCC: 5 | RNVC: 9
M-10215-1F4-17: RNCC: 5 | RNVC: 9
MIL-DTL-10215M: RNCC: 5 | RNVC: 9
6680005079981: RNCC: 5 | RNVC: 9
6680005079981: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-507-2619
Rigid Connecting Link

005072619
338993-7: RNCC: 3 | RNVC: 2
338993-7: RNCC: 5 | RNVC: 2
338993-7: RNCC: 5 | RNVC: 2
338993-7: RNCC: 5 | RNVC: 2
338993-7: RNCC: 5 | RNVC: 9
338993: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-516-3240
Shouldered Shaft

005163240
163B5606: RNCC: 3 | RNVC: 2

11 Aug 1974

3040-00-529-6012
Friction Lining

005296012
99137371: RNCC: 3 | RNVC: 2
37371: RNCC: 5 | RNVC: 9
4330PL0649147: RNCC: 6 | RNVC: 9

1 Jan 1961

3040-00-540-9936
Shaft Collar

005409936
1263723-4: RNCC: 3 | RNVC: 2
1263723-4: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-544-7533
Control Cam

005447533
3040VE14196: RNCC: 3 | RNVC: 2
791-4747-001: RNCC: 5 | RNVC: 2

2 Oct 1974

3040-00-552-4314
Tailrod

005524314
2300-578PC1: RNCC: 3 | RNVC: 2
845-4457741 PC-: RNCC: C | RNVC: 1

24 Oct 1974

3040-00-559-4522
Flexible Shaft Assembly Core

005594522
S13468-505: RNCC: 3 | RNVC: 2
13468-505: RNCC: 5 | RNVC: 9

14 Nov 1974

3040-00-563-7722
Rigid Connecting Link

005637722
60A52C165-1: RNCC: 3 | RNVC: 2

19 Nov 1974

3040-00-567-3613
Counterbalance Weight

005673613
2005T10P03: RNCC: 3 | RNVC: 2

28 Nov 1974

3040-00-567-0122
Straight Shaft

005670122
8327889-1: RNCC: 3 | RNVC: 2
2590005670122: RNCC: 5 | RNVC: 9

28 Nov 1974

3040-00-569-1225
Body Hub

005691225
5150279: RNCC: 3 | RNVC: 2
6207479: RNCC: 5 | RNVC: 2
5150279: RNCC: 5 | RNVC: 9
5150279: RNCC: 5 | RNVC: 9
PC5150279: RNCC: 5 | RNVC: 9
5150279C: RNCC: 5 | RNVC: 9
5150279: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-569-3690
Remote Control Lever

005693690
A3271-A: RNCC: 3 | RNVC: 2
A3271: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-567-6840
Shouldered Shaft

005676840
346508: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-589-9060
Rigid Connecting Link

005899060
354402-1: RNCC: 3 | RNVC: 2
354402-1: RNCC: 5 | RNVC: 2
354402-1: RNCC: 5 | RNVC: 2
354402-1: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-589-1160
Rigid Connecting Link

005891160
348715-3: RNCC: 3 | RNVC: 2
348715-3: RNCC: 5 | RNVC: 2
348715-3: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-600-3502
Control Cam

006003502
457247-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-601-1560
Shaft Retaining Plate

006011560
454196: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-605-2565
Shaft Collar

006052565
623-9222-001: RNCC: 3 | RNVC: 2
623-9222: RNCC: D | RNVC: 9

25 Jan 1975

3040-00-606-8090
Manual Control Lever

006068090
3941654-1: RNCC: 3 | RNVC: 2
3941654-1: RNCC: 5 | RNVC: 9

30 Jan 1975

3040-00-613-6568
Inertia Damper

006136568
364699-1: RNCC: 3 | RNVC: 2
364699-1: RNCC: 5 | RNVC: 2
364699-1: RNCC: 5 | RNVC: 2
364699-1: RNCC: 5 | RNVC: 9
364699-1: RNCC: 5 | RNVC: 9
364699-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-613-8170
Worm Shaft

006138170
6138170: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-621-1268
Shouldered Shaft

006211268
363887-1: RNCC: 3 | RNVC: 2
363887-1: RNCC: 5 | RNVC: 2
363887-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-622-7160
Remote Control Lever

006227160
10867075: RNCC: 3 | RNVC: 2

1 Mar 1975

3040-00-622-7171
Remote Control Lever

006227171
8763778: RNCC: 3 | RNVC: 2

1 Mar 1975

3040-00-623-1467
Blower Drive Shaft

006231467
5154638: RNCC: 3 | RNVC: 2
5154638: RNCC: 5 | RNVC: 9
K-5154638: RNCC: 5 | RNVC: 9
5154638: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-623-5352
Bell Crank

006235352
65-13018: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-624-5122
Rigid Connecting Link

006245122
204-001-016-13: RNCC: 3 | RNVC: 2
204-001-016-013: RNCC: 5 | RNVC: 2
204-001-016-13: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-625-8567
Rigid Connecting Link

006258567
374529-1: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-625-2983
Bell Crank

006252983
11671040: RNCC: 3 | RNVC: 2
2520006252983: RNCC: 5 | RNVC: 9

5 Mar 1975

3040-00-651-3549
Shouldered Shaft

006513549
21115-1025: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-651-9364
Shouldered Shaft

006519364
510231: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-652-6999
Counterbalance Weight

006526999
6786483: RNCC: 3 | RNVC: 2
6786483: RNCC: 5 | RNVC: 9
6786483: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-671-5950
Counterbalance Weight

006715950
358195CL6: RNCC: 3 | RNVC: 2
358195CLASS6: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-671-1582
Worm Wheel Gearshaft

006711582
487-5: RNCC: 3 | RNVC: 2
487-5: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-678-3130
Shouldered Shaft

006783130
10862050: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-682-5366
Shouldered Shaft

006825366
73749-6: RNCC: 3 | RNVC: 2
73749-6: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-690-1212
Rigid Connecting Link

006901212
10867061: RNCC: 3 | RNVC: 9
10867061: RNCC: 5 | RNVC: 2
2590006901212: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-703-0304
Ruddevator Slide Valve Arm

007030304
69-6232-2: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-714-4276
Counterbalance Weight

007144276
98070-04: RNCC: 3 | RNVC: 2
465450-4: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-715-2879
Spline Adapter

007152879
910C605-1: RNCC: 3 | RNVC: 2
910C605-1: RNCC: 5 | RNVC: 9
910C605-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-709-0781
Ring

007090781
1611206PC4: RNCC: 3 | RNVC: 2
1611206-4: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-715-7363
Remote Control Lever

007157363
5147640: RNCC: 3 | RNVC: 2
5184098: RNCC: 5 | RNVC: 9
5184098: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-705-0350
Bell Crank

007050350
159450: RNCC: 3 | RNVC: 2
159450: RNCC: 5 | RNVC: 2
159450: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-723-7494
Control Shaft

007237494
537551: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-724-2956
Bell Crank

007242956
9-67511-5: RNCC: 3 | RNVC: 2
65-13742-1: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-734-6731
Straight Shaft

007346731
100058R1: RNCC: 3 | RNVC: 2
62-67-14: RNCC: 5 | RNVC: 2
7346731: RNCC: 5 | RNVC: 2
62-67-14: RNCC: 5 | RNVC: 2
317170: RNCC: 5 | RNVC: 9
2520007346731: RNCC: 5 | RNVC: 9
62-67-14: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-735-3642
Spur Gearshaft

007353642
657132: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-738-1678
Helical Gearshaft

007381678
1700793: RNCC: 3 | RNVC: 2
1700793: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-738-4645
Rigid Connecting Link

007384645
4F51653-109B: RNCC: 3 | RNVC: 2

23 Feb 1968

3040-00-740-9013
Rotating Shaft Eye Bracket

007409013
D7736-6-6: RNCC: 3 | RNVC: 2
3A1809: RNCC: 3 | RNVC: 2
7409013: RNCC: 3 | RNVC: 2
2297524: RNCC: 5 | RNVC: 2
KC9605: RNCC: 5 | RNVC: 9
14356: RNCC: 5 | RNVC: 9
2297524: RNCC: 5 | RNVC: 9
237E17: RNCC: 5 | RNVC: 9
2297524: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-738-4624
Rigid Connecting Link

007384624
4F51653-103A: RNCC: 3 | RNVC: 2

23 Feb 1968

3040-00-745-7685
Straight Shaft

007457685
7017190: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-749-8916
Straight Shaft

007498916
13231: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-760-3184
Control Cam

007603184
913-30: RNCC: 3 | RNVC: 2
913-30: RNCC: 3 | RNVC: 9

5 Apr 1972

3040-00-760-1067
Planet Suppor Shaft

007601067
BL-4596: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-761-9720
Counterbalance Weight

007619720
P18C3767-2: RNCC: 3 | RNVC: 2
18C3767-2: RNCC: 3 | RNVC: 2
P18C3767-2: RNCC: 5 | RNVC: 9
P18C3767-2: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-763-5344
Remote Control Lever

007635344
69-10779-4: RNCC: 3 | RNVC: 2
69-10779-4: RNCC: 5 | RNVC: 2

14 Apr 1972

3040-00-765-9951
Spur Gearshaft

007659951
385384: RNCC: 3 | RNVC: 2
385384: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-766-3971
Linear Actuating Cylinder Piston

007663971
1GT-5: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-767-7039
Shouldered Shaft

007677039
363497-1: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-775-1450
Spur Gearshaft

007751450
131D5000P01: RNCC: 3 | RNVC: 2
131D5000: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-784-4676
Straight Shaft

007844676
404391: RNCC: 3 | RNVC: 2
404391: RNCC: 5 | RNVC: 2
404391: RNCC: 5 | RNVC: 2
404391: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-786-3246
Fuel Control Shaft

007863246
704897-4: RNCC: 3 | RNVC: 2
704897-4: RNCC: 5 | RNVC: 2
704897-4: RNCC: 5 | RNVC: 2
704897-2: RNCC: 5 | RNVC: 9

20 Mar 1968

3040-00-791-4205
Shouldered Shaft

007914205
202683: RNCC: 3 | RNVC: 2
202683: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-790-9707
Control Cam

007909707
69-9892-7: RNCC: 3 | RNVC: 2
69-9892-3: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-792-8185
Shouldered Shaft

007928185
13200E8804: RNCC: 3 | RNVC: 2
T22716: RNCC: 5 | RNVC: 9
15999: RNCC: 5 | RNVC: 9
2S387: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-794-7309
Control Cam

007947309
380232-1: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-795-7640
Straight Shaft

007957640
548-7698-002: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-799-5791
Shouldered Shaft

007995791
14711-508: RNCC: 3 | RNVC: 2
14711-508: RNCC: 5 | RNVC: 2
3040PL1559307: RNCC: 6 | RNVC: 9

1 Jan 1960

3040-00-802-5372
Rigid Connecting Link

008025372
820540-13: RNCC: 3 | RNVC: 2
820540-13: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-803-2103
Rigid Connecting Link

008032103
66-10708-6: RNCC: 3 | RNVC: 2
66-10708-2: RNCC: 5 | RNVC: 9
69-10938-3: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-804-2760
Ball Actuator Shaft

008042760
63754: RNCC: 3 | RNVC: 2
1922: RNCC: 5 | RNVC: 9
A42486: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-808-0295
Remote Control Lever

008080295
902392-1: RNCC: 3 | RNVC: 2
902392-1: RNCC: C | RNVC: 1
902392-1: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-809-7379
Bell Crank

008097379
10921473: RNCC: 3 | RNVC: 2
2530008097379: RNCC: 5 | RNVC: 9
2530008097379: RNCC: 6 | RNVC: 9

17 May 1968

3040-00-813-3337
Remote Control Lever

008133337
720136-1: RNCC: 3 | RNVC: 2
720136-1: RNCC: 3 | RNVC: 9

25 Mar 1968

3040-00-823-4312
Hub Clamp

008234312
3005142G1: RNCC: 3 | RNVC: 2

9 Aug 1967

3040-00-830-0323
Hub Clamp

008300323
5880508: RNCC: 3 | RNVC: 2
B34672: RNCC: 5 | RNVC: 2
L1599A-AP: RNCC: 5 | RNVC: 2
588-0508: RNCC: 5 | RNVC: 9
LU588AUL: RNCC: 5 | RNVC: 9
H2414PC74-90-95: RNCC: 5 | RNVC: 9
LJ-588A U/L: RNCC: 5 | RNVC: 9
PE8300323: RNCC: 5 | RNVC: 9
H2414: RNCC: D | RNVC: 9

1 Jan 1963

3040-00-834-4367
Rigid Connecting Link

008344367
4F23692-101A: RNCC: 3 | RNVC: 2

13 Sep 1967

3040-00-758-9386
Remote Control Lever

007589386
69-10785-6: RNCC: 3 | RNVC: 2
69-10785-6: RNCC: 5 | RNVC: 2
69-10785-6: RNCC: 5 | RNVC: 2
69-10785-7: RNCC: 5 | RNVC: 9
69-10785-6: RNCC: 5 | RNVC: 9
69-10785-7: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-752-1037
Multiple Gears Gearshaft

007521037
30-30-34: RNCC: 3 | RNVC: 2
7521037: RNCC: 3 | RNVC: 2
TG034: RNCC: 5 | RNVC: 9
2520007521037: RNCC: 5 | RNVC: 9
2355T2: RNCC: 5 | RNVC: 9
2355T2: RNCC: 5 | RNVC: 9
914103: RNCC: 5 | RNVC: 9
430303: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-752-1385
Straight Shaft

007521385
7521385: RNCC: 3 | RNVC: 2
673T5: RNCC: 5 | RNVC: 9
2843K219: RNCC: 5 | RNVC: 9
801E363: RNCC: 5 | RNVC: 9
913634: RNCC: 5 | RNVC: 9
3040007521385: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-754-0473
Manual Control Lever

007540473
7540473: RNCC: 3 | RNVC: 2
ARL7540473: RNCC: 5 | RNVC: 2
6764670: RNCC: 5 | RNVC: 2
6764670: RNCC: 5 | RNVC: 9
2520007540473: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-625-8579
Rigid Connecting Link

006258579
374537-1: RNCC: 3 | RNVC: 2
374537-1: RNCC: 5 | RNVC: 2
374537-1: RNCC: 5 | RNVC: 2
374537-1: RNCC: 5 | RNVC: 2
374537-1: RNCC: 5 | RNVC: 9
374537-1: RNCC: 5 | RNVC: 9
374537-1: RNCC: 5 | RNVC: 9
339411: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-690-2832
Detent Plate

006902832
7329034: RNCC: 3 | RNVC: 2
2510006902832: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-701-6210
Manual Control Lever

007016210
01208500: RNCC: 3 | RNVC: 2
6100C47A886: RNCC: 5 | RNVC: 2
01022700: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-756-4894
Rigid Connecting Link

007564894
73171-5: RNCC: 3 | RNVC: 2
73171-5: RNCC: 5 | RNVC: 2
73171-5: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-791-2744
Rigid Connecting Link

007912744
3-73054-1: RNCC: 3 | RNVC: 2
SR10587A1: RNCC: 5 | RNVC: 2
3-73054-1: RNCC: 5 | RNVC: 2
3-73054-1: RNCC: 5 | RNVC: 2
3-73054-1: RNCC: 5 | RNVC: 2
3-73054-1: RNCC: 5 | RNVC: 2
3-73054-1: RNCC: 5 | RNVC: 2
3-73054-1: RNCC: 5 | RNVC: 2
3-73054-1: RNCC: 5 | RNVC: 2
3-73054-1: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-790-8411
Remote Control Lever

007908411
162C9364P01: RNCC: 3 | RNVC: 2
162C9364: RNCC: 5 | RNVC: 9
162C9364: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-449-3536
Counterbalance Weight

004493536
567-1501-04: RNCC: 3 | RNVC: 2

8 May 1970

3040-00-450-0508
Pawl

004500508
2586526-1: RNCC: 3 | RNVC: 2
2586526: RNCC: D | RNVC: 9

7 May 1971

3040-00-450-7867
Rigid Connecting Link

004507867
212-060-724-11: RNCC: 3 | RNVC: 2
212-060-724-11: RNCC: 5 | RNVC: 2
212-060-724-11: RNCC: 5 | RNVC: 2

17 Dec 1969

3040-00-459-7730
Control Cam

004597730
4F53389-101A: RNCC: 3 | RNVC: 2

29 Dec 1969

3040-00-460-1410
Shouldered Shaft

004601410
569A954P1: RNCC: 3 | RNVC: 2
569A954: RNCC: D | RNVC: 9

9 Jan 1970

3040-00-459-4194
Helical Gearshaft

004594194
915136: RNCC: 3 | RNVC: 2

12 Aug 1970

3040-00-459-7328
Rigid Connecting Link

004597328
206-032-524-001: RNCC: 3 | RNVC: 2
206-032-524-1: RNCC: 5 | RNVC: 9

29 Dec 1969

3040-00-460-5064
Counterbalance Weight

004605064
69356-301-17: RNCC: 3 | RNVC: 2

7 Jan 1970

3040-00-461-9803
Rigid Connecting Link

004619803
3013T62G02: RNCC: 3 | RNVC: 2

23 Feb 1972

3040-00-465-5910
Shaft Collar

004655910
8028884: RNCC: 3 | RNVC: 2
8028884: RNCC: 3 | RNVC: 9
8028884: RNCC: 5 | RNVC: 9
9330006: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-477-6186
Rigid Connecting Link

004776186
10225505: RNCC: 3 | RNVC: 2
3040004776186: RNCC: 5 | RNVC: 9
433-2048: RNCC: 6 | RNVC: 9

16 May 1969

3040-00-485-4065
Shouldered Shaft

004854065
926547-1: RNCC: 3 | RNVC: 2

23 May 1969

3040-00-500-8388
Shouldered Shaft

005008388
5008388: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-508-1742
Splined Output Shaft

005081742
2488372: RNCC: 3 | RNVC: 2

26 Jul 1974

3040-00-501-2975
Pawl

005012975
5012975: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-514-1081
Shaft Collar

005141081
5141081: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-518-6265
Counterbalance Weight

005186265
4044393: RNCC: 3 | RNVC: 2
4044393: RNCC: 3 | RNVC: 2

13 Aug 1974

3040-00-529-2351
Shaft Collar

005292351
R-A1-1500: RNCC: 3 | RNVC: 2
5011PTR60: RNCC: 5 | RNVC: 2
R60: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-542-6308
Flexible Shaft Assembly

005426308
S18418-603: RNCC: 3 | RNVC: 2
18418-603: RNCC: 3 | RNVC: 9
J89A0001-1: RNCC: 5 | RNVC: 2
18418-603: RNCC: 5 | RNVC: 9
J89A0001-1: RNCC: 5 | RNVC: 9
312-14868YISSUE3: RNCC: 5 | RNVC: 9
0312-14868-Y-00-: RNCC: 5 | RNVC: 9
K89A0001-3: RNCC: 5 | RNVC: 9
K89A0001-3: RNCC: 7 | RNVC: 2

2 Oct 1974

3040-00-546-9721
Worm Shaft

005469721
8211668: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-539-0081
Pawl

005390081
3292091-1: RNCC: 3 | RNVC: 2
3292091-1: RNCC: 5 | RNVC: 2

25 Sep 1974

3040-00-553-3387
Shouldered Shaft

005533387
292123-15: RNCC: 3 | RNVC: 2
292123-15: RNCC: 5 | RNVC: 2

30 Oct 1974

3040-00-555-1134
Linear Actuating Cylinder Assembly Parts Kit

005551134
1043: RNCC: 3 | RNVC: 2
1043: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-563-4977
Remote Control Lever

005634977
11590886: RNCC: 3 | RNVC: 2

17 Oct 1969

3040-00-567-4884
Straight Shaft

005674884
2537.000: RNCC: 3 | RNVC: 2
CS4320-0362: RNCC: 5 | RNVC: 2
2537X: RNCC: 5 | RNVC: 9
1-B-2537: RNCC: 5 | RNVC: 9

17 Jan 1968

3040-00-567-5955
Linear Actuating Cylinder Piston

005675955
123CVM10506-1: RNCC: 3 | RNVC: 2
123CVM10506-1: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-568-3513
Remote Control Lever

005683513
90-2856-2: RNCC: 3 | RNVC: 2
90-2856-2: RNCC: 5 | RNVC: 2

16 Feb 1966

3040-00-572-0597
Rigid Connecting Link

005720597
35-30361-502: RNCC: 3 | RNVC: 2

4 Dec 1974

3040-00-574-2459
Main Landing Gear Rod Assembly

005742459
9-65370-3: RNCC: 3 | RNVC: 2
9-65370-2: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-575-7222
Spur Gearshaft

005757222
3231216-1: RNCC: 3 | RNVC: 2
3231216-1: RNCC: 5 | RNVC: 9

11 Dec 1974

3040-00-583-2507
Shouldered Shaft

005832507
4018T38P01: RNCC: 3 | RNVC: 2

21 Dec 1974

3040-00-595-6833
Spur Gearshaft

005956833
105D3439: RNCC: 3 | RNVC: 2

10 Jan 1975

3040-00-606-1217
Piston Ring

006061217
S13095-24: RNCC: 3 | RNVC: 2
S13095-24: RNCC: 5 | RNVC: 9

30 Jan 1975

3040-00-606-0447
Spur Gearshaft

006060447
4568512G001: RNCC: 3 | RNVC: 2
5468512G1: RNCC: 5 | RNVC: 9
5468512G1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-607-2130
Remote Control Lever

006072130
29-5598: RNCC: 3 | RNVC: 2
29-5598: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-610-7387
Shouldered Shaft

006107387
26-4395: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-609-6743
Shouldered Shaft

006096743
150562-1: RNCC: 3 | RNVC: 2
150562: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-610-1818
Shaft Retaining Plate

006101818
8041657: RNCC: 3 | RNVC: 9
8041657: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-610-8344
Rigid Connecting Link

006108344
5027T78G01: RNCC: 3 | RNVC: 2

5 Feb 1975

3040-00-614-9560
Shouldered Shaft

006149560
31172-2: RNCC: 3 | RNVC: 2
31172-2: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-615-8808
Rigid Connecting Link

006158808
8741905: RNCC: 3 | RNVC: 2
3040006158808: RNCC: 5 | RNVC: 9
8741900: RNCC: D | RNVC: 9

15 Feb 1975

3040-00-621-2147
Mechanical Drive Housing

006212147
371728: RNCC: 3 | RNVC: 2
371728: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-628-6904
Shouldered Shaft

006286904
538157: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-650-5615
R Power Control Arm

006505615
6826935: RNCC: 3 | RNVC: 2
6826935: RNCC: 5 | RNVC: 2
6826935: RNCC: 5 | RNVC: 9
6826935: RNCC: 5 | RNVC: 9
6826935: RNCC: 5 | RNVC: 9
3040PL1034526: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-652-2447
Remote Control Lever

006522447
159955: RNCC: 3 | RNVC: 2
159955: RNCC: 5 | RNVC: 2
159955: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-652-3262
Shouldered Shaft

006523262
204-001-359-1: RNCC: 3 | RNVC: 2
204-001-359-001: RNCC: 5 | RNVC: 2
204-001-359-1: RNCC: 5 | RNVC: 9
204-001-359-1: RNCC: 8 | RNVC: 2

1 Jan 1963

3040-00-654-3800
Control Cam

006543800
340723: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-664-8623
Shouldered Shaft

006648623
3047: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-671-1556
Spur Gearshaft

006711556
555-17: RNCC: 3 | RNVC: 2
555-17: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-671-5949
Counterbalance Weight

006715949
358195CL5: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-672-9984
Rigid Connecting Link

006729984
39-8170-503: RNCC: 3 | RNVC: 2
39-8170-2: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-673-9609
Shouldered Shaft

006739609
335089: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-674-8601
Counterbalance Weight

006748601
358195CL7: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-674-8602
Counterbalance Weight

006748602
358195CL8: RNCC: 3 | RNVC: 2
358195CL8: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-675-2947
Rigid Connecting Link

006752947
39-4652-501: RNCC: 3 | RNVC: 2
39-4652-501: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-675-8468
Shouldered Shaft

006758468
90-1580-2: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-676-2867
Turbine Engine Counter Balance Weight

006762867
377096CLC: RNCC: 3 | RNVC: 2
377096CLC: RNCC: 5 | RNVC: 2
377096CLC: RNCC: 5 | RNVC: 9
377096CLC: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-677-8484
Shouldered Shaft

006778484
103435: RNCC: 3 | RNVC: 2
103435: RNCC: C | RNVC: 1

1 Jan 1961

3040-00-684-5507
Ball Joint

006845507
A1000: RNCC: 3 | RNVC: 2
C103CAD: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-679-2459
Push-Pull Control Assembly

006792459
154-006: RNCC: 3 | RNVC: 2
8370: RNCC: 5 | RNVC: 2
171-14680: RNCC: 5 | RNVC: 9
8359: RNCC: 5 | RNVC: 9
8370: RNCC: 5 | RNVC: 9
8359: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-690-3082
Control Cam

006903082
10862951: RNCC: 3 | RNVC: 2
2540006903082: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-690-3504
Pawl

006903504
7790553: RNCC: 3 | RNVC: 2
3040006903504: RNCC: 5 | RNVC: 9
1005006903504: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-692-6123
Shaft Collar

006926123
8758225: RNCC: 3 | RNVC: 2
2803K1545: RNCC: 3 | RNVC: 2
8331553: RNCC: 5 | RNVC: 2
2803K1545: RNCC: 5 | RNVC: 2
2803U1451: RNCC: 5 | RNVC: 9
8758209: RNCC: D | RNVC: 9

1 Jan 1963

3040-00-698-2915
Straight Shaft

006982915
5178700: RNCC: 3 | RNVC: 2
K-5178700: RNCC: 5 | RNVC: 2
PC5178700: RNCC: 5 | RNVC: 9
2130: RNCC: 5 | RNVC: 9
K-5178700: RNCC: 5 | RNVC: 9
5178700: RNCC: 5 | RNVC: 9
3040006982915: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-706-4298
Spur Gearshaft

007064298
1721C7: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-707-4185
Shouldered Shaft

007074185
9893987G1: RNCC: 3 | RNVC: 2
9893987G1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-708-5709
Shouldered Shaft

007085709
60844: RNCC: 3 | RNVC: 2
CM-60844: RNCC: 5 | RNVC: 2
P60844: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-709-3660
Rigid Connecting Link

007093660
2-13814-1: RNCC: 3 | RNVC: 9
2-13814-1: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-709-6691
Manual Control Lever

007096691
41736: RNCC: 3 | RNVC: 2
41736: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-711-5737
Counterbalance Weight

007115737
841B726P1: RNCC: 3 | RNVC: 2
841B726P1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-712-4339
Extension Shaft

007124339
5478274G001: RNCC: 3 | RNVC: 2
5478274G1: RNCC: 5 | RNVC: 9
5478274G1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-715-8300
Shaft Collar

007158300
52A226D16-6: RNCC: 3 | RNVC: 2
52A226D16-6: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-716-1848
Counterbalance Weight

007161848
133772-05: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-717-9948
Remote Control Lever

007179948
152058: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-720-3277
Shaft Collar

007203277
C1-1: RNCC: 3 | RNVC: 2
419244-1: RNCC: 5 | RNVC: 2
10594793-1: RNCC: 5 | RNVC: 2
500151: RNCC: 5 | RNVC: 2
10320326: RNCC: 5 | RNVC: 2
C308019000: RNCC: 5 | RNVC: 2
12-119-01-001: RNCC: 5 | RNVC: 9
500151: RNCC: 5 | RNVC: 9
10034211: RNCC: D | RNVC: 9

1 Jan 1963

3040-00-723-7451
Splined Shaft

007237451
536700: RNCC: 3 | RNVC: 2
536700: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-726-1923
Rigid Connecting Link

007261923
2-74191-1: RNCC: 3 | RNVC: 2
2-74191-1: RNCC: 5 | RNVC: 2
2-74191-1: RNCC: 5 | RNVC: 9
2-74191-1: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-734-6953
Nonrotating Shaft Eye Bracket

007346953
7346953: RNCC: 3 | RNVC: 2
3299R1396: RNCC: 3 | RNVC: 9
3040007346953: RNCC: 5 | RNVC: 9
KC5265: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-735-4558
Shouldered Shaft

007354558
805-1624105-55: RNCC: 3 | RNVC: 2
E 55: RNCC: 5 | RNVC: 2
805-1624105 PIECE 55: RNCC: 5 | RNVC: 2
3040PL1336996: RNCC: 6 | RNVC: 9
1624105: RNCC: D | RNVC: 9

1 Jan 1963

3040-00-738-4635
Rigid Connecting Link

007384635
4F51653-107A: RNCC: 3 | RNVC: 2

23 Feb 1968

3040-00-738-7694
Control Cam

007387694
A4502M1-17: RNCC: 3 | RNVC: 9

1 Jan 1961

3040-00-752-1097
Straight Shaft

007521097
30-67-20: RNCC: 3 | RNVC: 2
30-67-20: RNCC: 5 | RNVC: 2
7521097: RNCC: 5 | RNVC: 2
914117: RNCC: 5 | RNVC: 9
3040007521097: RNCC: 5 | RNVC: 9
2380T2: RNCC: 5 | RNVC: 9
2380T2: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-752-1655
Body Hub

007521655
A333E785: RNCC: 3 | RNVC: 9
913735: RNCC: 5 | RNVC: 9
618D6: RNCC: 5 | RNVC: 9
7521655: RNCC: D | RNVC: 9

1 Jan 1960

3040-00-753-1410
Control Cam

007531410
7-40721-1: RNCC: 3 | RNVC: 2
7-40721-1: RNCC: 3 | RNVC: 9
7-40721-1: RNCC: 5 | RNVC: 2
7-40721-1: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-758-5024
Linear Actuating Cylinder Assembly

007585024
6973-B-1: RNCC: 3 | RNVC: 2
PDD1015-1: RNCC: 3 | RNVC: 2
PDD1015-1: RNCC: 3 | RNVC: 9
6973-B-1: RNCC: 5 | RNVC: 9
6973L: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-759-6846
Remote Control Lever

007596846
69-27402-4: RNCC: 3 | RNVC: 2
69-27402-4: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-761-2498
Spur Gearshaft

007612498
528930-2: RNCC: 3 | RNVC: 2
528930-2: RNCC: 5 | RNVC: 2
528930-2: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-761-9721
Counterbalance Weight

007619721
P18C3767-3: RNCC: 3 | RNVC: 2
P18C3767-3: RNCC: 5 | RNVC: 9
P18C3767-3: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-763-4206
Counterbalance Weight

007634206
4016T48P01: RNCC: 3 | RNVC: 2

12 Apr 1972

3040-00-768-1007
Rigid Connecting Link

007681007
2-13432-1: RNCC: 3 | RNVC: 2
2-13432-1: RNCC: 3 | RNVC: 9

1 Jan 1962

3040-00-770-6186
Flexible Shaft Assembly Core

007706186
0312-18085-X-00: RNCC: 3 | RNVC: 1
0312-18085-X-00-1: RNCC: 3 | RNVC: 2
1569106: RNCC: 5 | RNVC: 2
0312-18085-X-00: RNCC: 5 | RNVC: 9
0312-18085-X-00-1: RNCC: 5 | RNVC: 9
1569106: RNCC: 5 | RNVC: 9
1569106: RNCC: 5 | RNVC: 9
1569106: RNCC: C | RNVC: 1

1 Jan 1960

3040-00-770-8384
Shouldered Shaft

007708384
805-1624130PC23: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-773-3018
Pawl

007733018
0101295: RNCC: 3 | RNVC: 2
1680H23-026-1: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-773-3053
Brake Disc

007733053
40311: RNCC: 3 | RNVC: 2
40311: RNCC: 5 | RNVC: 9
40311: RNCC: 5 | RNVC: 9
40308: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-776-7874
Shouldered Shaft

007767874
6700770: RNCC: 3 | RNVC: 2
7767874: RNCC: 5 | RNVC: 2
6700770: RNCC: 5 | RNVC: 9
3040007767874: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-776-7868
Rigid Connecting Link

007767868
8892942: RNCC: 3 | RNVC: 2
8892942: RNCC: 5 | RNVC: 2
8892942: RNCC: 5 | RNVC: 2
7767868: RNCC: 5 | RNVC: 2
3040007767868: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-777-0142
Brake Disc

007770142
173B11-1: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-778-6567
Spur Gearshaft

007786567
405716: RNCC: 3 | RNVC: 2
405716: RNCC: 3 | RNVC: 2
405716: RNCC: 5 | RNVC: 9
405716: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-784-1389
Counterbalance Weight

007841389
359438CL5: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-783-7069
Remote Control Lever

007837069
10917808: RNCC: 3 | RNVC: 2
2510007837069: RNCC: 5 | RNVC: 9

21 Apr 1972

3040-00-784-1386
Counterbalance Weight

007841386
359438CL2: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-785-6353
Remote Control Lever

007856353
BL901: RNCC: 3 | RNVC: 2
TI-3040-6353: RNCC: 5 | RNVC: 2
7383419: RNCC: 5 | RNVC: 2
3040007856353: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-788-4768
Counterbalance Weight

007884768
67413-301-5: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-785-2211
Aft Snubber Cam

007852211
7132941-01: RNCC: 3 | RNVC: 2
7132941-01: RNCC: 5 | RNVC: 2
C7409: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-796-4704
Remote Control Lever

007964704
10942826: RNCC: 3 | RNVC: 2
2020007964704: RNCC: 5 | RNVC: 9
10942826: RNCC: 8 | RNVC: 2

1 Jan 1960

3040-00-797-0200
Rigid Connecting Link

007970200
14711-512-1: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-801-7896
Counterbalance Weight

008017896
133772-08: RNCC: 3 | RNVC: 2
133772-08: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-805-0146
Rigid Connecting Link

008050146
201126471: RNCC: 3 | RNVC: 2
201126471-1: RNCC: 5 | RNVC: 2
55745: RNCC: 5 | RNVC: 9
1000-15L: RNCC: 5 | RNVC: 9

14 Oct 1966

3040-00-819-0108
Bell Crank

008190108
4F73506-101A: RNCC: 3 | RNVC: 2

29 Mar 1968

3040-00-821-4627
Valve Shaft

008214627
41A185: RNCC: 3 | RNVC: 2
41A185: RNCC: 3 | RNVC: 9
41A185: RNCC: 5 | RNVC: 9
41A185: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-827-1049
Cradle Brake

008271049
7000M2135: RNCC: 3 | RNVC: 9
620940-2560361: RNCC: 5 | RNVC: 2
2560361: RNCC: 5 | RNVC: 2
2560361: RNCC: 5 | RNVC: 9
2560361: RNCC: 5 | RNVC: 9
7000M2135: RNCC: 5 | RNVC: 9
2560361: RNCC: 5 | RNVC: 9

23 Aug 1967

3040-00-834-0905
Ball Joint

008340905
150-2911: RNCC: 3 | RNVC: 2
150-0974: RNCC: 5 | RNVC: 9
150-974: RNCC: 5 | RNVC: 9
150A974: RNCC: 5 | RNVC: 9
3040008340905: RNCC: 6 | RNVC: 9

13 Sep 1967

3040-00-834-2847
Valve Shaft

008342847
139122-1: RNCC: 3 | RNVC: 2
139122-1: RNCC: 5 | RNVC: 9

13 Sep 1967

3040-00-837-1881
Counterbalance Weight

008371881
3010117CL3: RNCC: 3 | RNVC: 2
3010117CL3: RNCC: 5 | RNVC: 2

7 Dec 1966

3040-00-838-6482
Pivot Shaft Assy

008386482
939797-101: RNCC: 3 | RNVC: 2
939797-1: RNCC: 5 | RNVC: 2

12 Dec 1966

3040-00-841-8997
Governor Shaft

008418997
5127663: RNCC: 3 | RNVC: 2
5127663: RNCC: 5 | RNVC: 9

23 Dec 1966

3040-00-450-7858
Rigid Connecting Link

004507858
212-060-724-039: RNCC: 3 | RNVC: 2
212-060-724-39: RNCC: D | RNVC: 9

17 Dec 1969

3040-00-453-4708
Shouldered Shaft

004534708
1C5714P05: RNCC: 3 | RNVC: 2
1C5714P05: RNCC: 5 | RNVC: 2

16 Apr 1969

3040-00-453-8155
Worm Wheel Gearshaft

004538155
531577-1: RNCC: 3 | RNVC: 2

9 Apr 1969

3040-00-460-2834
Shouldered Shaft

004602834
26728299: RNCC: 3 | RNVC: 2
26728299: RNCC: 5 | RNVC: 2

5 Jan 1970

3040-00-463-0916
Helical Gearshaft

004630916
C5P27019: RNCC: 3 | RNVC: 9

9 May 1969

3040-00-465-6349
Flexible Drive Shaft

004656349
02-6100-04: RNCC: 3 | RNVC: 2
02-6100-04: RNCC: 3 | RNVC: 9

16 Jan 1970

3040-00-470-6889
Inj Cam Roller Shoe

004706889
20119: RNCC: 3 | RNVC: 2
15851: RNCC: 5 | RNVC: 9

30 Jan 1970

3040-00-476-3639
Bell Crank

004763639
65-39045-3: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-477-4317
Straight Shaft

004774317
6-83811-5: RNCC: 3 | RNVC: 2

12 Jun 1974

3040-00-476-7036
Extension Shaft

004767036
66380-001: RNCC: 3 | RNVC: 9
AU-2(ALTERED): RNCC: 5 | RNVC: 9

10 Jun 1971

3040-00-475-6032
Mechanical Drive Housing

004756032
6823502: RNCC: 3 | RNVC: 2
6823502: RNCC: 5 | RNVC: 2
6823502: RNCC: 5 | RNVC: 2
6823502: RNCC: 5 | RNVC: 2
6823502: RNCC: 5 | RNVC: 9
6823502: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-483-1865
Shouldered Shaft

004831865
MBEU2250GRU5: RNCC: 3 | RNVC: 2

1 Feb 1971

3040-00-491-3602
Shouldered Shaft

004913602
701365: RNCC: 3 | RNVC: 1
701365: RNCC: 5 | RNVC: 2
3040NR0260: RNCC: 5 | RNVC: 9
3040NR0260: RNCC: D | RNVC: 9

25 Sep 1970

3040-00-497-3445
Rigid Connecting Link

004973445
212-010-404-005: RNCC: 3 | RNVC: 2
212-010-404-5: RNCC: 5 | RNVC: 2
212-010-404-1: RNCC: 5 | RNVC: 9
212-010-404-001: RNCC: 5 | RNVC: 9

2 Oct 1970

3040-00-497-7213
Control Cam

004977213
740895-2: RNCC: 3 | RNVC: 2

21 Jun 1971

3040-00-498-4941
Shouldered Shaft

004984941
4F53767-103A: RNCC: 3 | RNVC: 2
4F53767-101A: RNCC: 5 | RNVC: 9

8 Oct 1969

3040-00-501-4984
Shouldered Shaft

005014984
RC31141: RNCC: 3 | RNVC: 2
RC31141: RNCC: 5 | RNVC: 9
RC31141: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-509-1052
Counterbalance Weight

005091052
1548390-6: RNCC: 3 | RNVC: 2
1548390-6: RNCC: 5 | RNVC: 9

26 Jul 1974

3040-00-511-9982
Spur Gearshaft

005119982
810240-1: RNCC: 3 | RNVC: 2

3 Aug 1974

3040-00-513-5788
Linear Actuating Cylinder Piston

005135788
M2020533: RNCC: 3 | RNVC: 2
8327983: RNCC: 3 | RNVC: 2
652E17: RNCC: 5 | RNVC: 9
KC9654: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-522-2434
Manual Control Lever

005222434
200820303-01: RNCC: 3 | RNVC: 2
323874PC1: RNCC: 5 | RNVC: 2
5222434: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-522-6280
Spur Gearshaft

005226280
117D2973: RNCC: 3 | RNVC: 2
117D2973: RNCC: 5 | RNVC: 2

23 Aug 1974

3040-00-526-5356
Bell Crank

005265356
5-89036-8: RNCC: 3 | RNVC: 2

28 Aug 1974

3040-00-528-1528
Rigid Connecting Link

005281528
9-64823: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-535-5202
Brake Disc

005355202
E201M7: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-544-2147
Manual Control Lever

005442147
344059-4: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-545-6391
Shouldered Shaft

005456391
9-50128-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-558-0149
Shouldered Shaft

005580149
36976-1: RNCC: 3 | RNVC: 2
36976-1: RNCC: 5 | RNVC: 9

15 Oct 1969

3040-00-562-0111
Shouldered Shaft

005620111
7708975: RNCC: 3 | RNVC: 2
6767836: RNCC: 5 | RNVC: 9
6767836: RNCC: 5 | RNVC: 9
7708975: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-562-5294
Control Cam

005625294
102987B: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-566-1700
Control Cam

005661700
103026B: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-568-3514
Remote Control Lever

005683514
90-2856-3: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-572-4375
Shouldered Shaft

005724375
1433-623303: RNCC: 3 | RNVC: 2
1433-623303: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-572-0599
Rigid Connecting Link

005720599
4F77243-103A: RNCC: 3 | RNVC: 2
4F77243: RNCC: D | RNVC: 9

4 Dec 1974

3040-00-575-9286
Main Gear Coupling

005759286
6-84501-3: RNCC: 3 | RNVC: 2
6-84501: RNCC: D | RNVC: 9

11 Dec 1974

3040-00-592-9919
Remote Control Lever

005929919
26-2230: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-600-7253
Rigid Connecting Link

006007253
341358: RNCC: 3 | RNVC: 2
341358: RNCC: 5 | RNVC: 2
341358: RNCC: 5 | RNVC: 2
341358: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-600-2558
Rigid Connecting Link

006002558
90-3212-3: RNCC: 3 | RNVC: 2
90-3212-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-600-9263
Rigid Connecting Link

006009263
800189-1: RNCC: 3 | RNVC: 2
800189-1: RNCC: 3 | RNVC: 9

15 Jun 1985

3040-00-605-1892
Bell Crank

006051892
6-74813-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-606-2851
Straight Shaft

006062851
11671050-2: RNCC: 3 | RNVC: 2
2815006062851: RNCC: 6 | RNVC: 9

30 Jan 1975

3040-00-606-4588
Spur Gearshaft

006064588
8756533: RNCC: 3 | RNVC: 2
3040006064588: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-610-0383
Rigid Connecting Link

006100383
11610762: RNCC: 3 | RNVC: 2

5 Feb 1975

3040-00-610-8410
Rigid Connecting Link

006108410
4011981-8: RNCC: 3 | RNVC: 9
4011981-8: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-614-2301
Push-Pull Control Assembly

006142301
29-8078-2: RNCC: 3 | RNVC: 2

20 Dec 2011

3040-00-614-7196
Remote Control Lever

006147196
11671161: RNCC: 3 | RNVC: 2
2590006147196: RNCC: 5 | RNVC: 9
11671161: RNCC: 5 | RNVC: 9

12 Feb 1975

3040-00-615-8799
Rigid Connecting Link

006158799
8741902: RNCC: 3 | RNVC: 2
8741900: RNCC: D | RNVC: 9

15 Feb 1975

3040-00-618-2074
Hub Clamp

006182074
A101-14: RNCC: 3 | RNVC: 2
214-1093P2: RNCC: 5 | RNVC: 2
214-1093P2: RNCC: 5 | RNVC: 2
9072010: RNCC: 5 | RNVC: 2
214-1093P2: RNCC: 5 | RNVC: 9
214-1093: RNCC: 5 | RNVC: 9
214-1093: RNCC: 7 | RNVC: 1
361808-1: RNCC: C | RNVC: 1
121B655H01: RNCC: C | RNVC: 1

1 Jan 1961

3040-00-611-6865
Control Cam

006116865
32882-5: RNCC: 3 | RNVC: 2
32882-5: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-621-1345
Rigid Connecting Link

006211345
364077-3: RNCC: 3 | RNVC: 2
364077-3: RNCC: 5 | RNVC: 2
364077-1: RNCC: 5 | RNVC: 9
3040PL0933259: RNCC: 6 | RNVC: 9
364077: RNCC: D | RNVC: 9

1 Jan 1963

3040-00-624-6741
Rigid Connecting Link

006246741
204-001-353-1: RNCC: 3 | RNVC: 2
204-001-353-1: RNCC: 5 | RNVC: 2
204-001-353-001: RNCC: 5 | RNVC: 2
204-001-353-1: RNCC: 5 | RNVC: 9
204-001-353-1: RNCC: 7 | RNVC: 2

1 Jan 1963

3040-00-626-8804
Shouldered Shaft

006268804
362732-2: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-629-9869
Shouldered Shaft

006299869
8204919: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-631-4155
Shouldered Shaft

006314155
11246: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-651-0640
Shouldered Shaft

006510640
55-22325-15: RNCC: 3 | RNVC: 2
CA6547-34-1: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-653-9518
Shouldered Shaft

006539518
8350566: RNCC: 3 | RNVC: 2
62.71.067: RNCC: 5 | RNVC: 9
2520006539518: RNCC: 5 | RNVC: 9
8350566: RNCC: 5 | RNVC: 9
3040006539518: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-658-2070
Control Cam

006582070
340724: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-670-6861
Linear Actuating Cylinder Piston

006706861
63C52576-7: RNCC: 3 | RNVC: 9
56A23538: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-659-0785
Shouldered Shaft

006590785
111832-3: RNCC: 3 | RNVC: 2
111832-3: RNCC: 5 | RNVC: 9
111832-3: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-672-9982
Rigid Connecting Link

006729982
39-8170-501: RNCC: 3 | RNVC: 2
39-8170: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-672-9985
Rigid Connecting Link

006729985
39-8170-504: RNCC: 3 | RNVC: 2
39-8170-3: RNCC: 5 | RNVC: 2
39-8170-3: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-673-9612
Cutoff Valve Shaft

006739612
336767: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-675-3897
Spur Gearshaft

006753897
570150-3: RNCC: 3 | RNVC: 2
570150-3: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-677-7311
Straight Shaft

006777311
8622206: RNCC: 3 | RNVC: 9
76679-3: RNCC: 5 | RNVC: 9
76679-3: RNCC: C | RNVC: 1
8622206: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-690-1214
Shouldered Shaft

006901214
10867063: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-691-6787
Shouldered Shaft

006916787
802254: RNCC: 3 | RNVC: 9
802254: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-701-1909
Straight Shaft

007011909
1867-501-017-1: RNCC: 3 | RNVC: 1
1867-501-017-1CP: RNCC: 5 | RNVC: 1
1867-501-017-1CP: RNCC: 5 | RNVC: 2
1867-501-017-1L1: RNCC: 5 | RNVC: 9
1867-501-017-1L1: RNCC: C | RNVC: 1

9 Feb 1968

3040-00-708-7669
Output Shaft

007087669
9778BW: RNCC: 3 | RNVC: 2

7 Feb 1968

3040-00-709-3690
Rigid Connecting Link

007093690
2-73163-1: RNCC: 3 | RNVC: 2
2-73163-1: RNCC: 5 | RNVC: 2
2-73163-1: RNCC: 5 | RNVC: 2
2-73163-1: RNCC: 5 | RNVC: 2
2-73163-1: RNCC: 5 | RNVC: 2
2-73163-1: RNCC: 5 | RNVC: 2
2-73163-1: RNCC: 5 | RNVC: 2
2-73163-1: RNCC: 5 | RNVC: 2
2-73163-1: RNCC: 5 | RNVC: 2
SR10583A501: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-709-3659
Rigid Connecting Link

007093659
2-13812-1: RNCC: 3 | RNVC: 2
2-13812-1: RNCC: 5 | RNVC: 2
2-13812-1: RNCC: 5 | RNVC: 2
2-13812-1: RNCC: 5 | RNVC: 2
2-13812-1: RNCC: 5 | RNVC: 2
2-13812-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-709-3693
Rigid Connecting Link

007093693
2-73224-1: RNCC: 3 | RNVC: 2
2-73224-1: RNCC: 5 | RNVC: 2
2-73224-1: RNCC: 5 | RNVC: 2
2-73224-1: RNCC: 5 | RNVC: 2
2-73224-1: RNCC: 5 | RNVC: 2
2-73224-1: RNCC: 5 | RNVC: 2
2-73224-1: RNCC: 5 | RNVC: 2
2-73224-1: RNCC: 5 | RNVC: 2
SR10721A501: RNCC: 5 | RNVC: 9
14-73909-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-714-4275
Counterbalance Weight

007144275
98070-03: RNCC: 3 | RNVC: 2
465450-3: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-719-5344
Spur Gearshaft

007195344
119379: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-726-1251
Control Cam

007261251
5009T57P03: RNCC: 3 | RNVC: 2

31 Mar 1972

3040-00-733-4742
Shouldered Shaft

007334742
8351717: RNCC: 3 | RNVC: 2
8351717: RNCC: 5 | RNVC: 2
2520007334742: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-740-1002
Shouldered Shaft

007401002
547A003045: RNCC: 3 | RNVC: 2
003045: RNCC: 3 | RNVC: 2
PL547-600PC20: RNCC: 5 | RNVC: 2
C547-600PC20: RNCC: 5 | RNVC: 2
547A003045: RNCC: 5 | RNVC: 9
A547-604: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-735-4564
Control Cam

007354564
803-1623055 PC10: RNCC: 3 | RNVC: 2
3055-10: RNCC: C | RNVC: 1
1623055: RNCC: D | RNVC: 9

1 Jan 1963

3040-00-756-4928
Shouldered Shaft

007564928
694045: RNCC: 3 | RNVC: 2
694045: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-759-6938
Shouldered Shaft

007596938
69-10889: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-760-3745
Control Cam

007603745
707213-2: RNCC: 3 | RNVC: 2
707213-2: RNCC: 3 | RNVC: 9

1 Mar 1968

3040-00-763-4832
Rigid Connecting Link

007634832
2482814: RNCC: 3 | RNVC: 2
2482814: RNCC: 5 | RNVC: 2

14 Apr 1972

3040-00-766-1250
Spur Gearshaft

007661250
385379: RNCC: 3 | RNVC: 2
385379: RNCC: 5 | RNVC: 2
385379: RNCC: 5 | RNVC: 2
385379: RNCC: 5 | RNVC: 9
385379: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-768-2088
Spur Gearshaft

007682088
358176: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-768-9788
Control Cam

007689788
357007-3: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-769-0789
Shouldered Shaft

007690789
886462-1: RNCC: 3 | RNVC: 2
886462-1: RNCC: 5 | RNVC: 9
886462-1: RNCC: 5 | RNVC: 9

9 Apr 1972

3040-00-769-4518
Linear Actuating Cylinder Assembly Parts Kit

007694518
T1L110B: RNCC: 3 | RNVC: 2
T1L110B: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-775-3416
Bevel Gearshaft

007753416
278D632P1: RNCC: 3 | RNVC: 2
278D632P1: RNCC: 5 | RNVC: 9
278D632P1: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-776-7849
Remote Control Lever

007767849
8892783: RNCC: 3 | RNVC: 2
7767849: RNCC: 5 | RNVC: 2
3040007767849: RNCC: 6 | RNVC: 9

1 Jan 1962

3040-00-777-1752
Pawl

007771752
378405: RNCC: 3 | RNVC: 2
378405: RNCC: 3 | RNVC: 2
376878: RNCC: 5 | RNVC: 1
376878: RNCC: 5 | RNVC: 1
2425-1: RNCC: 5 | RNVC: 2
376997: RNCC: 5 | RNVC: 9
376878: RNCC: 5 | RNVC: 9
378405: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-778-0480
Friction Lining

007780480
9090938: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-788-6731
Rigid Connecting Link

007886731
32-64055-5: RNCC: 3 | RNVC: 2
32-64055-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-785-9324
Spur Gearshaft

007859324
547763: RNCC: 3 | RNVC: 2
547733: RNCC: 3 | RNVC: 9
547763: RNCC: 5 | RNVC: 2
547763: RNCC: 5 | RNVC: 2
547763: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-789-9208
Shaft Retaining Plate

007899208
136148-2: RNCC: 3 | RNVC: 2
136148-2: RNCC: 5 | RNVC: 2
136148-2: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-790-8404
Spur Gearshaft

007908404
131D5006P01: RNCC: 3 | RNVC: 2
131D006P01: RNCC: 5 | RNVC: 9
165322: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-796-8345
Spur Gearshaft

007968345
01-10953: RNCC: 3 | RNVC: 2
01-10953: RNCC: 5 | RNVC: 9
01-10953: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-798-4182
Pawl

007984182
14711-513: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-798-6251
Straight Shaft

007986251
699946: RNCC: 3 | RNVC: 2
695197: RNCC: 5 | RNVC: 9
698467: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-799-3843
Counterbalance Weight

007993843
402003CL3: RNCC: 3 | RNVC: 2
402003CLS: RNCC: 5 | RNVC: 2
402003CLS: RNCC: 5 | RNVC: 2
402003CLS: RNCC: 5 | RNVC: 2
402003CLS: RNCC: 5 | RNVC: 2
402003CLS: RNCC: 5 | RNVC: 2
402003CLS: RNCC: 5 | RNVC: 2
402003CLS: RNCC: 5 | RNVC: 2
402003CLS: RNCC: 5 | RNVC: 9
402003CLS: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-803-2282
Mechanical Drive Housing

008032282
203273: RNCC: 3 | RNVC: 2
203273: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-806-6352
Shouldered Shaft

008066352
902993-3: RNCC: 3 | RNVC: 9
902993-3: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-802-4449
Rigid Connecting Link

008024449
907329-1: RNCC: 3 | RNVC: 2
907329-1: RNCC: 5 | RNVC: 2
907329-1: RNCC: 5 | RNVC: 2
818502-1: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-813-3342
Remote Control Lever

008133342
598862: RNCC: 3 | RNVC: 2
598862: RNCC: 3 | RNVC: 9

25 Mar 1968

3040-00-813-3323
Remote Control Lever

008133323
598878: RNCC: 3 | RNVC: 2
598878: RNCC: 5 | RNVC: 2
598878: RNCC: 5 | RNVC: 2

25 Mar 1968

3040-00-827-8478
Spur Gearshaft

008278478
1872340-2: RNCC: 3 | RNVC: 9
1872340-2: RNCC: 5 | RNVC: 9

25 Aug 1967

3040-00-820-2610
Hub Clamp

008202610
419339-8: RNCC: 3 | RNVC: 2
5189113-003: RNCC: C | RNVC: 1
419339: RNCC: C | RNVC: 1

1 Jan 1962

3040-00-833-1026
Shouldered Shaft

008331026
5150923: RNCC: 3 | RNVC: 2
5150923: RNCC: 5 | RNVC: 1
PC5150923: RNCC: 5 | RNVC: 9
K-5150923: RNCC: 5 | RNVC: 9
5150923: RNCC: 5 | RNVC: 9

8 Sep 1967

3040-00-841-9402
Turbine Engine Counter Balance Weight

008419402
3010117CL2: RNCC: 3 | RNVC: 2

23 Dec 1966

3040-00-451-4421
Shaft Retaining Plate

004514421
8734044: RNCC: 3 | RNVC: 2

14 May 1971

3040-00-451-6668
Shouldered Shaft

004516668
2584792: RNCC: 3 | RNVC: 2
2584792: RNCC: 5 | RNVC: 2
2584792: RNCC: 5 | RNVC: 2

17 May 1971

3040-00-451-8761
Shouldered Shaft

004518761
HP1058102-1: RNCC: 3 | RNVC: 2
1058102-1: RNCC: 3 | RNVC: 2
1058102-1: RNCC: 5 | RNVC: 9
HP1058102-1: RNCC: 5 | RNVC: 9

21 May 1971

3040-00-456-1143
Shouldered Shaft

004561143
13211E3177: RNCC: 3 | RNVC: 2

23 Apr 1969

3040-00-456-9114
Rigid Connecting Link

004569114
531AS108-1: RNCC: 3 | RNVC: 2

29 Sep 1972

3040-00-457-0305
Remote Control Lever

004570305
10863811: RNCC: 3 | RNVC: 2
2590004570305: RNCC: 6 | RNVC: 9

28 Apr 1969

3040-00-462-2491
Straight Shaft

004622491
10225486: RNCC: 3 | RNVC: 2
10225486: RNCC: 5 | RNVC: 9
433-1888: RNCC: 6 | RNVC: 9

19 May 1969

3040-00-464-9265
Shouldered Shaft

004649265
215548-1: RNCC: 3 | RNVC: 2
215548-1: RNCC: 5 | RNVC: 1
215548-1: RNCC: 5 | RNVC: 9

14 May 1969

3040-00-463-4779
Bell Crank

004634779
209-001-754-1: RNCC: 3 | RNVC: 2

10 Sep 1969

3040-00-470-8523
Counterbalance Weight

004708523
9686M85P01: RNCC: 3 | RNVC: 2

30 Jan 1970

3040-00-460-2960
Rigid Connecting Link

004602960
209-001-075-1: RNCC: 3 | RNVC: 2

5 Jan 1970

3040-00-473-3216
Rubber Spool

004733216
803-2145600-PC15: RNCC: 3 | RNVC: 2
2400-138PC26: RNCC: 5 | RNVC: 9
42553-8PCA3: RNCC: 5 | RNVC: 9
2300SK72285PCA3: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-475-0058
Multiple Gears Gearshaft

004750058
1-080-310-01: RNCC: 3 | RNVC: 9
1-080-310-01: RNCC: 5 | RNVC: 2
1-080-310-01: RNCC: 5 | RNVC: 9
1-080-310-01: RNCC: 5 | RNVC: 9
1-080-310-01: RNCC: 5 | RNVC: 9
1-080-310-01: RNCC: 8 | RNVC: 2

1 Jan 1963

3040-00-484-1453
Spur Gearshaft

004841453
3014410: RNCC: 3 | RNVC: 2
3014410: RNCC: 5 | RNVC: 2

21 May 1969

3040-00-490-5809
Rigid Connecting Link

004905809
114S2971-82: RNCC: 3 | RNVC: 2

29 Sep 1969

3040-00-494-7194
Pawl

004947194
602371-01: RNCC: 3 | RNVC: 2
202371-01: RNCC: 5 | RNVC: 9
202371-01: RNCC: 5 | RNVC: 9
202471-00: RNCC: 5 | RNVC: 9
1192-11006-01: RNCC: C | RNVC: 1

18 Feb 1970

3040-00-494-7723
Control Cam

004947723
4F54513-101B: RNCC: 3 | RNVC: 2

18 Feb 1970

3040-00-492-3656
Rigid Connecting Link

004923656
47A16279: RNCC: 3 | RNVC: 9
47A16279: RNCC: 5 | RNVC: 2
47A16279: RNCC: 5 | RNVC: 2
50-19025: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-507-0173
Linear Actuating Cylinder Assembly Parts Kit

005070173
PK502HLL01: RNCC: 3 | RNVC: 2
SKD160341: RNCC: 5 | RNVC: 2
PK502HLL02: RNCC: 5 | RNVC: 9
PK502HLL01: RNCC: 5 | RNVC: 9
PK502HLLU1: RNCC: C | RNVC: 1

23 Jul 1974

3040-00-507-7228
Straight Shaft

005077228
13218E4382-2: RNCC: 3 | RNVC: 2
13218E4382: RNCC: D | RNVC: 9

26 Jul 1974

3040-00-520-6438
Shaft Collar

005206438
5206438: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-519-4313
Remote Control Lever

005194313
5194313: RNCC: 3 | RNVC: 2
A20187: RNCC: 5 | RNVC: 2
3040PL0958618: RNCC: 6 | RNVC: 9
1005005194313: RNCC: 6 | RNVC: 9
717124429402: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-523-8616
Bell Crank

005238616
339003-5: RNCC: 3 | RNVC: 2
339003: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-525-7289
Rigid Connecting Link

005257289
44A9826: RNCC: 3 | RNVC: 9
44A9826: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-00-528-1170
Rigid Connecting Link

005281170
3-55524-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-528-1172
Rigid Connecting Link

005281172
6-83583: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-531-5889
Spur Gearshaft

005315889
532316-1: RNCC: 3 | RNVC: 2
532316-1: RNCC: 5 | RNVC: 9
532316-1: RNCC: 5 | RNVC: 9

13 Jun 1969

3040-00-554-2137
Shaft Collar

005542137
177652: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-562-0095
Linear Actuating Cylinder Piston

005620095
6767596: RNCC: 3 | RNVC: 2
7708897: RNCC: 3 | RNVC: 2
6767596: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-565-2143
Shouldered Shaft

005652143
2576262: RNCC: 3 | RNVC: 2

21 Nov 1974

3040-00-578-4356
Straight Shaft

005784356
3791-50158-01: RNCC: 3 | RNVC: 2

14 Dec 1974

3040-00-590-2334
Shouldered Shaft

005902334
16201051: RNCC: 3 | RNVC: 2
16201051: RNCC: 3 | RNVC: 9
16201051: RNCC: 5 | RNVC: 2
NAFB208F: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-600-9607
Worm-Spu Gearshaft

006009607
GYLC644-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-606-2842
Bell Crank

006062842
63-2248: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-607-2092
Remote Control Lever

006072092
29-5597: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-610-9644
Ball Joint

006109644
315321: RNCC: 3 | RNVC: 2
27518: RNCC: 5 | RNVC: 9
27518: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-613-7281
Spur Gearshaft

006137281
9609M97P05: RNCC: 3 | RNVC: 2

8 Feb 1975

3040-00-613-5442
Gearbox Idler Shaft

006135442
14-51152-1: RNCC: 3 | RNVC: 2
14-51152-1: RNCC: 3 | RNVC: 2
14-51152-1: RNCC: 5 | RNVC: 2
14-51152-1: RNCC: 5 | RNVC: 2
14-51152-1: RNCC: 5 | RNVC: 9

31 Mar 1972

3040-00-621-1298
Shouldered Shaft

006211298
363901-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-622-7170
Remote Control Lever

006227170
10867166: RNCC: 3 | RNVC: 2

1 Mar 1975

3040-00-622-7165
Shaft Retaining Plate

006227165
10867466: RNCC: 3 | RNVC: 2

1 Mar 1975

3040-00-625-3274
Counterbalance Weight

006253274
336C715P1: RNCC: 3 | RNVC: 2
336C715P1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-628-0155
Rigid Connecting Link

006280155
66-8802: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-627-5992
Rigid Connecting Link

006275992
67110: RNCC: 3 | RNVC: 9
7061296: RNCC: 5 | RNVC: 2
3040006275992: RNCC: 5 | RNVC: 9
787R6: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-651-3821
Shouldered Shaft

006513821
535246: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-651-4078
Control Cam

006514078
7027968: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-652-2151
Control Cam

006522151
50-3751-13: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-657-9593
Rigid Connecting Link

006579593
362599-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-673-2401
Brake Disc

006732401
5507-1086: RNCC: 3 | RNVC: 9
5507-1086: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-673-9886
Straight Shaft

006739886
346509-3: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-674-9358
Bell Crank

006749358
6826934: RNCC: 3 | RNVC: 2
6826934: RNCC: 5 | RNVC: 9
6826934: RNCC: 5 | RNVC: 9
6826934: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-675-9130
Control Cam

006759130
337783: RNCC: 3 | RNVC: 2
337783: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-675-6218
Counterbalance Weight

006756218
98070-06: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-689-5157
Shaft Collar

006895157
100863: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-689-3409
Bevel Gearshaft

006893409
11636093: RNCC: 3 | RNVC: 2
2040006893409: RNCC: 5 | RNVC: 9
3040006893409: RNCC: 6 | RNVC: 9

8 Feb 1971

3040-00-702-1404
Rotating Shaft Eye Bracket

007021404
4F61183-103B: RNCC: 3 | RNVC: 2

2 Feb 1968

3040-00-709-0073
Straight Shaft

007090073
4F55194-107A: RNCC: 3 | RNVC: 2

16 Feb 1968

3040-00-709-3761
Linear Actuating Cylinder Piston

007093761
915-91U: RNCC: 3 | RNVC: 9
53B22147: RNCC: 5 | RNVC: 2
53B22147: RNCC: 5 | RNVC: 2
915-91: RNCC: 5 | RNVC: 9
53B22147: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-710-2380
Rigid Connecting Link

007102380
2-73333-3: RNCC: 3 | RNVC: 2
2-73333-3: RNCC: 3 | RNVC: 9
2-73333-3: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-710-6569
Manual Control Lever

007106569
7106569: RNCC: 3 | RNVC: 2
1015007106569: RNCC: 5 | RNVC: 9
1015-710-6569: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-716-1849
Counterbalance Weight

007161849
92186-06: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-719-5112
Counterbalance Weight

007195112
500-1270: RNCC: 3 | RNVC: 2
500-1270: RNCC: 3 | RNVC: 9
47010: RNCC: 5 | RNVC: 1
B500-1270: RNCC: 5 | RNVC: 9
B3851-56234: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-723-6177
Counterbalance Weight

007236177
841B724P1: RNCC: 3 | RNVC: 2
841B724P1: RNCC: 5 | RNVC: 9

1 Jan 1963

Load More Results