What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 135 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 135 of 300

3040-01-024-5191
Bevel Gearshaft

010245191
65-19825-1: RNCC: 3 | RNVC: 2

12 Jul 1976

3040-01-024-5282
Rigid Connecting Link

010245282
69-3368: RNCC: 3 | RNVC: 2

12 Jul 1976

3040-01-027-4214
Seal Kit Assembly Outrigger Cylinder

010274214
A39499-1: RNCC: 3 | RNVC: 2

16 Sep 1976

3040-01-029-7390
Rigid Connecting Link

010297390
69-17550-6: RNCC: 3 | RNVC: 2
69-17550-6: RNCC: 5 | RNVC: 9

21 Oct 1976

3040-01-029-7389
Rigid Connecting Link

010297389
69-17550-5: RNCC: 3 | RNVC: 2
69-17550-5: RNCC: 5 | RNVC: 9

21 Oct 1976

3040-01-030-6189
Shouldered Shaft

010306189
10894393-5: RNCC: 3 | RNVC: 2

9 Nov 1976

3040-01-033-6895
Lock Shaft

010336895
051249: RNCC: 3 | RNVC: 2
887B051249: RNCC: 5 | RNVC: 9
887B051249: RNCC: 5 | RNVC: 9
887B051249: RNCC: C | RNVC: 1

8 Jan 1977

3040-01-032-4216
Multiple Gears Gearshaft

010324216
714968: RNCC: 3 | RNVC: 2

15 Dec 1976

3040-01-031-0582
Remote Control Lever

010310582
A60A1228: RNCC: 3 | RNVC: 2
A60A1228: RNCC: 3 | RNVC: 9

17 Nov 1976

3040-01-036-2989
Rigid Connecting Link

010362989
12008671: RNCC: 3 | RNVC: 2

24 Feb 1977

3040-01-029-8429
Rigid Connecting Link

010298429
BACR24N2BL060: RNCC: 3 | RNVC: 2
BACR24N2BL060: RNCC: 5 | RNVC: 2
BACR24N2BL060: RNCC: 5 | RNVC: 2
BACR24N2BL60: RNCC: 5 | RNVC: 9
BACR24N2L60: RNCC: 5 | RNVC: 9
BACR24N2BL60: RNCC: 5 | RNVC: 9
BAXR24N2BL60: RNCC: 5 | RNVC: 9
BACR24N: RNCC: D | RNVC: 9

23 Oct 1976

3040-01-034-3698
Worm Shaft

010343698
715953: RNCC: 3 | RNVC: 2

25 Jan 1977

3040-01-036-7589
Spur Gearshaft

010367589
A-15192: RNCC: 3 | RNVC: 2

5 Mar 1977

3040-01-038-1500
Shaft Collar

010381500
11672195: RNCC: 3 | RNVC: 2

31 Mar 1977

3040-01-042-3389
I Control Parts Kit

010423389
042152: RNCC: 3 | RNVC: 2
A42152: RNCC: 3 | RNVC: 9

9 Jun 1977

3040-01-043-5333
Control Cam

010435333
7708922: RNCC: 3 | RNVC: 2

25 Jun 1977

3040-01-044-5956
Rigid Connecting Link

010445956
8741958: RNCC: 3 | RNVC: 2

17 Jul 1977

3040-01-044-6120
Mechanical Drive Housing

010446120
8353-34: RNCC: 3 | RNVC: 2

17 Jul 1977

3040-01-044-7743
Hydraulic Motor Shaft

010447743
4161509: RNCC: 3 | RNVC: 2
4100071-1: RNCC: 5 | RNVC: 2
4100071-1: RNCC: 5 | RNVC: 9
461509: RNCC: 5 | RNVC: 9

20 Jul 1977

3040-01-045-2059
Shaft Retaining Plate

010452059
11727839: RNCC: 3 | RNVC: 2

28 Jul 1977

3040-01-052-1165
Shouldered Shaft

010521165
12265864: RNCC: 3 | RNVC: 2

10 Dec 1977

3040-01-053-0536
Spur Gearshaft

010530536
202063: RNCC: 3 | RNVC: 2

24 Dec 1977

3040-01-055-6470
Shouldered Shaft

010556470
167C1583: RNCC: 3 | RNVC: 2
3040PL0664637: RNCC: 6 | RNVC: 9

9 Feb 1978

3040-01-055-6383
Hub Clamp

010556383
105D3820: RNCC: 3 | RNVC: 2
105D3820H3: RNCC: 5 | RNVC: 9
3040PL0664565: RNCC: 6 | RNVC: 9

9 Feb 1978

3040-01-056-6179
Rigid Connecting Link

010566179
BACR24N6A240: RNCC: 3 | RNVC: 2
BACR24N6A240: RNCC: 5 | RNVC: 9
BACR24D6A240: RNCC: 5 | RNVC: 9
BACR24D: RNCC: D | RNVC: 9

25 Feb 1978

3040-01-058-0262
Shouldered Shaft

010580262
5141609: RNCC: 3 | RNVC: 2
8923053: RNCC: 3 | RNVC: 2
5149937: RNCC: 3 | RNVC: 2
5149937: RNCC: 5 | RNVC: 1
8923053: RNCC: 5 | RNVC: 2
5106879: RNCC: 5 | RNVC: 9
5148610: RNCC: 5 | RNVC: 9
5141609: RNCC: C | RNVC: 1

22 Mar 1978

3040-00-983-1158
Counterbalance Weight

009831158
461035CL1: RNCC: 3 | RNVC: 2
461035CL1: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-01-003-6956
Spline Shaft

010036956
714126: RNCC: 3 | RNVC: 2

3 May 1975

3040-00-991-3710
Counterbalance Weight

009913710
426836CL7: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-01-006-6164
Drive Shaft

010066164
737259: RNCC: 3 | RNVC: 9
737259: RNCC: 5 | RNVC: 9
H7656PC30: RNCC: 5 | RNVC: 9
H7656PC30: RNCC: 5 | RNVC: 9
H7656PC30: RNCC: C | RNVC: 1
737259: RNCC: C | RNVC: 1
737259: RNCC: C | RNVC: 1
H7656PC30: RNCC: C | RNVC: 1

19 Jul 1975

3040-00-449-3537
Counterbalance Weight

004493537
567-1501-05: RNCC: 3 | RNVC: 2

8 May 1970

3040-00-449-3539
Counterbalance Weight

004493539
567-1501-07: RNCC: 3 | RNVC: 2

8 May 1970

3040-00-450-3982
Bell Crank

004503982
212-060-734-1: RNCC: 3 | RNVC: 2

12 Dec 1969

3040-00-453-4720
Shouldered Shaft

004534720
4F73379-601A: RNCC: 3 | RNVC: 2
4F73379-101A: RNCC: C | RNVC: 1

16 Apr 1969

3040-00-450-7855
Rigid Connecting Link

004507855
212-060-724-15: RNCC: 3 | RNVC: 2

17 Dec 1969

3040-00-455-5956
Straight Shaft

004555956
10225488: RNCC: 3 | RNVC: 2
10225488: RNCC: 5 | RNVC: 1
433-1928: RNCC: 6 | RNVC: 9

18 Apr 1969

3040-00-460-0511
Rigid Connecting Link

004600511
4F73630-101A: RNCC: 3 | RNVC: 2
F73630: RNCC: D | RNVC: 9
4F73630: RNCC: D | RNVC: 9

9 Jan 1970

3040-00-467-0617
Counterbalance Weight

004670617
6887174: RNCC: 3 | RNVC: 2
6887174: RNCC: 5 | RNVC: 9

3 Jun 1974

3040-00-469-3043
Linear Actuating Cylinder

004693043
68A733107-1003: RNCC: 3 | RNVC: 2
68A733107-1003: RNCC: 5 | RNVC: 2
68A733107-1003: RNCC: 5 | RNVC: 9

7 Jun 1974

3040-00-470-6959
Rigid Connecting Link

004706959
031047: RNCC: 3 | RNVC: 2
9F9638: RNCC: 5 | RNVC: 2
03040-91: RNCC: 5 | RNVC: 2
031047: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-471-0307
Flexible Shaft Assembly

004710307
SB-450-B: RNCC: 3 | RNVC: 9
SB-450-1: RNCC: 5 | RNVC: 9
SB450-1: RNCC: 5 | RNVC: 9

2 Feb 1970

3040-00-475-4328
Rotary Pump Shoe

004754328
5661: RNCC: 3 | RNVC: 2
5661PB: RNCC: 5 | RNVC: 2
5661SPB: RNCC: 5 | RNVC: 9
CW8695/E ITEM NO. 24: RNCC: 5 | RNVC: 9

9 Jun 1974

3040-00-477-6890
Counterbalance Weight

004776890
502281CL2: RNCC: 3 | RNVC: 2

16 May 1969

3040-00-482-8444
Rigid Connecting Link

004828444
MB300-683: RNCC: 3 | RNVC: 2
MB300-683: RNCC: 5 | RNVC: 2

25 Jan 1971

3040-00-484-1448
Spur Gearshaft

004841448
3014403: RNCC: 3 | RNVC: 2

21 May 1969

3040-00-484-4346
Spur Gearshaft

004844346
3015877: RNCC: 3 | RNVC: 2

23 May 1969

3040-00-487-3585
Spur Gearshaft

004873585
817012-1: RNCC: 3 | RNVC: 2

22 Jun 1974

3040-00-496-0202
Bell Crank

004960202
212-001-711-1: RNCC: 3 | RNVC: 2

26 Sep 1969

3040-00-502-1312
Shaft Collar

005021312
5021312: RNCC: 3 | RNVC: 2
1015005021312: RNCC: 5 | RNVC: 9
1015005021312: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-523-7744
Spline Adapter

005237744
AN4182: RNCC: 2 | RNVC: 2
AN4182-2: RNCC: 5 | RNVC: 1
AN4182-2: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-528-1534
Rigid Connecting Link

005281534
90-1546: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-532-6676
Spur Gearshaft

005326676
35336-1: RNCC: 3 | RNVC: 2
35336-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-540-5726
Shaft Collar

005405726
364268-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-544-1860
Shouldered Shaft

005441860
350814: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-554-8035
Shouldered Shaft

005548035
5548035: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-562-7020
Rh Inst Shoe

005627020
11 1-8-5353-4: RNCC: 3 | RNVC: 2
5353-4: RNCC: 5 | RNVC: 2

14 Nov 1974

3040-00-564-5377
Lever Assembly

005645377
41001591: RNCC: 3 | RNVC: 2

17 Nov 1974

3040-00-578-8153
Shouldered Shaft

005788153
201F365: RNCC: 3 | RNVC: 2

14 Dec 1974

3040-00-588-2287
Remote Control Lever

005882287
6-83697-2: RNCC: 3 | RNVC: 2
6-83697-2: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-588-2157
Manual Control Lever

005882157
357015-3: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-601-3642
Manual Control Lever

006013642
14309: RNCC: 3 | RNVC: 9
14309: RNCC: 5 | RNVC: 2
14309: RNCC: 5 | RNVC: 9
14309: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-606-0110
Shouldered Shaft

006060110
73014: RNCC: 3 | RNVC: 2
73258PC33: RNCC: 5 | RNVC: 9

30 Jan 1975

3040-00-606-0709
Declutch Shaft Assembly

006060709
60-312-0002-2: RNCC: 3 | RNVC: 2
01-435-0027-5PC26: RNCC: 5 | RNVC: 2
01-435-0027-5PC26: RNCC: 5 | RNVC: 9
60-312-0002-2: RNCC: 5 | RNVC: 9

30 Jan 1975

3040-00-607-2867
Shaft Collar

006072867
162B8634: RNCC: 3 | RNVC: 2

14 Jul 2014

3040-00-608-5124
Shouldered Shaft

006085124
7269151: RNCC: 3 | RNVC: 2
3040006085124: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-608-9805
Hub Clamp

006089805
1292469-1: RNCC: 3 | RNVC: 2
1292469-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-610-9341
Bell Crank

006109341
598B10044: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-624-5139
Rigid Connecting Link

006245139
204-001-011-13: RNCC: 3 | RNVC: 2
204-001-011-013: RNCC: 5 | RNVC: 2
204-001-011-13: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-627-3735
Shouldered Shaft

006273735
526-1067-01: RNCC: 3 | RNVC: 2
10106743: RNCC: 6 | RNVC: 9

9 Mar 1975

3040-00-629-9181
Straight Shaft

006299181
6785512: RNCC: 3 | RNVC: 2
6785512: RNCC: 5 | RNVC: 9
6785512: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-633-7616
Straight Shaft

006337616
867510: RNCC: 3 | RNVC: 2
867510: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-650-9981
Rigid Connecting Link

006509981
339387: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-651-4138
Bell Crank

006514138
346482-3: RNCC: 3 | RNVC: 2
346482-3: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-652-7772
Rigid Connecting Link

006527772
375008-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-657-3523
Hub Clamp

006573523
1600200: RNCC: 3 | RNVC: 2
1600200PAB: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-670-7791
Potentiometer Gear

006707791
913-434: RNCC: 3 | RNVC: 2
04056686004883: RNCC: 5 | RNVC: 2
A913-434: RNCC: 5 | RNVC: 9
913-473: RNCC: 5 | RNVC: 9
913-434: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-671-1255
Spur Gearshaft

006711255
542-3995-002: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-671-9084
Shouldered Shaft

006719084
63C52543-7: RNCC: 3 | RNVC: 2
63C52543-7: RNCC: 3 | RNVC: 9
63C52543-9: RNCC: 5 | RNVC: 2
63C52543-9: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-673-1272
Control Cam

006731272
1012481: RNCC: 3 | RNVC: 2
1012481: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-692-9137
Pawl

006929137
8697971: RNCC: 3 | RNVC: 2
6782908: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-701-9919
Rigid Connecting Link

007019919
204-030-481-1: RNCC: 3 | RNVC: 2
204-030-481-001: RNCC: 5 | RNVC: 2
204-030-481-1: RNCC: 8 | RNVC: 2

1 Jan 1963

3040-00-706-2319
Detent Plate

007062319
10870700: RNCC: 3 | RNVC: 2
2590007062319: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-709-3694
Rigid Connecting Link

007093694
SR10514A501: RNCC: 3 | RNVC: 2
2-73226-1: RNCC: 5 | RNVC: 2
2-73226-1: RNCC: 5 | RNVC: 9
2-73226-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-709-7139
Rigid Connecting Link

007097139
2-13479-1: RNCC: 3 | RNVC: 2
2-13479-1: RNCC: 5 | RNVC: 2
2-13479-1: RNCC: 5 | RNVC: 2
2-13479-1: RNCC: 5 | RNVC: 2
2-13479-1: RNCC: 5 | RNVC: 2
2-13479-1: RNCC: 5 | RNVC: 2
2-13479-1: RNCC: 5 | RNVC: 2
2-13479-1: RNCC: 5 | RNVC: 2
2-13479-1: RNCC: 5 | RNVC: 2
2-13479-1: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-710-2376
Rigid Connecting Link

007102376
2-73250-1: RNCC: 3 | RNVC: 9
SR10515A501: RNCC: 5 | RNVC: 9
2-73250-1: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-710-2353
Rigid Connecting Link

007102353
2-40726-1: RNCC: 3 | RNVC: 2
2-40726-1: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-713-7521
Control Cam

007137521
2-41300-5: RNCC: 3 | RNVC: 9
2-41300-5: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-719-9106
Drive Shaft

007199106
5955: RNCC: 3 | RNVC: 2
5955: RNCC: 5 | RNVC: 2
5955: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-714-2304
Shaft

007142304
155864: RNCC: 3 | RNVC: 9
155864: RNCC: 5 | RNVC: 2
TP155864: RNCC: 5 | RNVC: 9
155864: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-724-2858
Straight Shaft

007242858
66-9859: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-716-6597
Inertia Damper

007166597
BM76454: RNCC: 3 | RNVC: 2
BM78247: RNCC: 3 | RNVC: 2
10085766: RNCC: 6 | RNVC: 9

9 Feb 1968

3040-00-724-8378
Spur Gearshaft

007248378
A6573: RNCC: 3 | RNVC: 2
A6573: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-740-9565
Brake Band And Lining

007409565
7409565: RNCC: 3 | RNVC: 2
305314: RNCC: 5 | RNVC: 2
3040007409565: RNCC: 5 | RNVC: 9
KC1759: RNCC: 5 | RNVC: 9
SA1542: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-759-8932
Rigid Connecting Link

007598932
6-73391-1: RNCC: 3 | RNVC: 2
6-73391-1: RNCC: C | RNVC: 1

1 Jan 1960

3040-00-758-3802
Shouldered Shaft

007583802
66-10618: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-752-0970
Remote Control Lever

007520970
1174B2: RNCC: 3 | RNVC: 9
7520970: RNCC: 5 | RNVC: 2
913055: RNCC: 5 | RNVC: 9
2520007520970: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-759-8831
Hub Clamp

007598831
S3300Y-C091: RNCC: 3 | RNVC: 2
C91: RNCC: 5 | RNVC: 9
30-00243-003: RNCC: C | RNVC: 1

1 Jan 1961

3040-00-758-6381
Helical Gearshaft

007586381
529002-1: RNCC: 3 | RNVC: 2
529002-1: RNCC: 5 | RNVC: 2
529002-1: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-761-0708
Rigid Connecting Link

007610708
4F54116-101A: RNCC: 3 | RNVC: 2
4F54116-101A: RNCC: 5 | RNVC: 9

8 Mar 1968

3040-00-764-4031
Standoff Motor Shaft

007644031
913-423: RNCC: 3 | RNVC: 2
913-423: RNCC: 3 | RNVC: 9

12 Apr 1972

3040-00-775-7739
Rigid Connecting Link

007757739
204-001-018-27: RNCC: 3 | RNVC: 2
204-001-018-027: RNCC: 5 | RNVC: 2
204-001-018-27: RNCC: 5 | RNVC: 2

1 Jan 1960

3040-00-778-2427
Brake Disc

007782427
E8387: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-777-4435
Rigid Connecting Link

007774435
2-40415-503: RNCC: 3 | RNVC: 9
2-40415-501: RNCC: 5 | RNVC: 9
2-40415-501: RNCC: 5 | RNVC: 9
2-40415-503: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-776-7654
Control Cam

007767654
7767654: RNCC: 3 | RNVC: 2
7767654: RNCC: 5 | RNVC: 9
715105: RNCC: 5 | RNVC: 9
7767654: RNCC: 5 | RNVC: 9
3040007767654: RNCC: 6 | RNVC: 9
2520007767654: RNCC: 6 | RNVC: 9

1 Jan 1962

3040-00-784-1385
Counterbalance Weight

007841385
359438CL1: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-765-6772
Spur Gearshaft

007656772
392707: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-754-5268
Rigid Connecting Link

007545268
11010203: RNCC: 3 | RNVC: 2
11010203: RNCC: 3 | RNVC: 9
10106746: RNCC: 6 | RNVC: 9
3040PL1339053: RNCC: 6 | RNVC: 9

1 Jan 1960

3040-00-787-1531
Linear Actuating Cylinder

007871531
55B21250: RNCC: 3 | RNVC: 9
2C1747A: RNCC: 5 | RNVC: 2
2C1747A: RNCC: 5 | RNVC: 2
55B21250: RNCC: 5 | RNVC: 2
50-19094: RNCC: 5 | RNVC: 9
55B21250: RNCC: C | RNVC: 1

1 Jan 1962

3040-00-788-3806
Counterbalance Weight

007883806
66947-301-1: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-767-4240
Rigid Connecting Link

007674240
S1565-64173-92037: RNCC: 3 | RNVC: 2
S1565-64173-000: RNCC: 3 | RNVC: 2
S1565-64173: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-789-0974
Ball Joint

007890974
S641: RNCC: 3 | RNVC: 2
TR332: RNCC: 3 | RNVC: 2
HFJ3CR: RNCC: 3 | RNVC: 2
ERS3980: RNCC: 5 | RNVC: 9
13206E0240: RNCC: 7 | RNVC: 2

1 Jan 1960

3040-00-789-9348
Shouldered Shaft

007899348
7088-30: RNCC: 3 | RNVC: 2
C7088-30: RNCC: 5 | RNVC: 9
3040PL1773535: RNCC: 6 | RNVC: 9

1 Jan 1962

3040-00-791-2745
Rigid Connecting Link

007912745
14-73908-3: RNCC: 1 | RNVC: 2
14-73908-3: RNCC: 3 | RNVC: 2
14-73908-3: RNCC: 3 | RNVC: 2
3-73054-3: RNCC: 5 | RNVC: 2
SR10587A3: RNCC: 5 | RNVC: 2
3-73054-3: RNCC: 5 | RNVC: 9
3-73054-3: RNCC: C | RNVC: 1

1 Jan 1962

3040-00-793-0347
Control Cam

007930347
357556-8: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-795-7991
Shaft Collar

007957991
757-0935-001: RNCC: 3 | RNVC: 2
757-0935-001: RNCC: 3 | RNVC: 2
620011001: RNCC: 3 | RNVC: 2
2055222: RNCC: C | RNVC: 1

1 Jan 1960

3040-00-798-4999
Bell Crank

007984999
14711-207: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-806-6384
Rigid Connecting Link

008066384
810865-1: RNCC: 3 | RNVC: 9
810865-1: RNCC: 5 | RNVC: 1
810865-1: RNCC: 5 | RNVC: 2
810865-1: RNCC: 5 | RNVC: 2
810865-1: RNCC: 5 | RNVC: 9
810865-1: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-807-9815
Rigid Connecting Link

008079815
802278: RNCC: 3 | RNVC: 2
802278-1: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-808-6771
Shouldered Shaft

008086771
10895419: RNCC: 3 | RNVC: 2

3 May 1968

3040-00-818-2445
Linear Actuating Cylinder Assembly

008182445
4965-010: RNCC: 3 | RNVC: 2
343AS310-1: RNCC: 5 | RNVC: 2
4965B: RNCC: 5 | RNVC: 2
4965-010: RNCC: 5 | RNVC: 9
4690004: RNCC: 5 | RNVC: 9
4965B: RNCC: 5 | RNVC: 9
4965B-010: RNCC: 5 | RNVC: 9
4965B: RNCC: 5 | RNVC: 9
4965: RNCC: 5 | RNVC: 9
343AS310: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-808-6776
Straight Shaft

008086776
10925502: RNCC: 3 | RNVC: 2

3 May 1968

3040-00-825-4051
Rigid Connecting Link

008254051
4C22083-101A: RNCC: 3 | RNVC: 2

18 Aug 1967

3040-00-829-1901
Counterbalance Weight

008291901
2473K10P050: RNCC: 3 | RNVC: 2

30 Aug 1967

3040-00-819-5980
Mechanical Drive Housing

008195980
GS8443: RNCC: 3 | RNVC: 2

29 Mar 1968

3040-00-837-1000
Push-Pull Control Assembly

008371000
13213E5287-2: RNCC: 1 | RNVC: 2
CCX63309: RNCC: 3 | RNVC: 2
44982-4: RNCC: 5 | RNVC: 9
D32377-003-0108-0: RNCC: 5 | RNVC: 9
30MSERIES108-9FT: RNCC: 5 | RNVC: 9
B044982-004: RNCC: 5 | RNVC: 9

7 Dec 1966

3040-00-460-9207
Remote Control Lever

004609207
886450-1: RNCC: 3 | RNVC: 2
886450-1: RNCC: 5 | RNVC: 9

9 Jan 1970

3040-00-460-2958
Rigid Connecting Link

004602958
209-001-072-1: RNCC: 3 | RNVC: 2

5 Jan 1970

3040-00-463-7485
Shouldered Shaft

004637485
9850012P001: RNCC: 3 | RNVC: 2
9850012P1: RNCC: 5 | RNVC: 9
9850012P1: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-672-6548
Rigid Connecting Link

006726548
374594-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-769-4519
Linear Actuating Cylinder Assembly Parts Kit

007694519
T1L109B: RNCC: 3 | RNVC: 9
105-3743: RNCC: 5 | RNVC: 2
T1L109B: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-771-8485
Pawl

007718485
4F61244-101A: RNCC: 3 | RNVC: 2

11 Mar 1968

3040-00-770-7325
Shouldered Shaft

007707325
7707325: RNCC: 3 | RNVC: 2
6700735: RNCC: 5 | RNVC: 2
6700735: RNCC: 5 | RNVC: 9
2520007707325: RNCC: 5 | RNVC: 9
3040007707325: RNCC: 6 | RNVC: 9

1 Jan 1962

3040-00-772-2049
Rotating Shaft Eye Bracket

007722049
XE-763: RNCC: 3 | RNVC: 2
MD32-21000: RNCC: 5 | RNVC: 2
7722049: RNCC: 5 | RNVC: 2
1202N2: RNCC: 5 | RNVC: 9
763: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-765-6809
Spur Gearshaft

007656809
392694: RNCC: 3 | RNVC: 2
392694: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-782-8676
Shaft Collar

007828676
100906: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-784-1388
Counterbalance Weight

007841388
359438CL4: RNCC: 3 | RNVC: 2
359438CL4: RNCC: 5 | RNVC: 2
359438CL4: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-767-0484
Flexible Shaft Assembly

007670484
1568956: RNCC: 3 | RNVC: 2
1568956: RNCC: 5 | RNVC: 9
1569666: RNCC: 5 | RNVC: 9
1568956: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-788-2099
Rigid Connecting Link

007882099
32-46006-7: RNCC: 3 | RNVC: 2
32-46006-21: RNCC: 3 | RNVC: 2
32-46006-21: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-508-9639
Control Cam

005089639
4016T53P06: RNCC: 3 | RNVC: 2
4016T53P06: RNCC: 5 | RNVC: 9

26 Jul 1974

3040-00-542-3099
Straight Shaft

005423099
13211E3132: RNCC: 3 | RNVC: 1
11524-42-1: RNCC: 5 | RNVC: 1
MIL-L-52087: RNCC: 5 | RNVC: 9
3132: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-548-7299
Shouldered Shaft

005487299
706384: RNCC: 3 | RNVC: 2

15 Oct 1974

3040-00-556-0405
Control Cam

005560405
743423-1: RNCC: 3 | RNVC: 2

4 Nov 1974

3040-00-554-7257
Rigid Connecting Link

005547257
339404: RNCC: 3 | RNVC: 2
339404: RNCC: 5 | RNVC: 2
339404: RNCC: 5 | RNVC: 9
339404: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-554-7436
Rigid Connecting Link

005547436
339399-6: RNCC: 3 | RNVC: 2
339399-6: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-835-7635
Shaft Collar

008357635
100865: RNCC: 3 | RNVC: 2

7 Dec 1966

3040-00-837-1903
Counterbalance Weight

008371903
3010117CL1: RNCC: 3 | RNVC: 2

7 Dec 1966

3040-00-839-6228
Oil Pump Drive Shaft

008396228
5126350: RNCC: 3 | RNVC: 2
5126350: RNCC: 5 | RNVC: 9

16 Dec 1966

3040-00-453-8895
Straight Shaft

004538895
64C33093-7: RNCC: 3 | RNVC: 2
64C33093-7: RNCC: 3 | RNVC: 9
64C33093-7: RNCC: 5 | RNVC: 9

18 Feb 1972

3040-00-450-7862
Rigid Connecting Link

004507862
212-060-724-25: RNCC: 3 | RNVC: 2
212-060-724-025: RNCC: 5 | RNVC: 2
212-060-724-25: RNCC: 5 | RNVC: 2

17 Dec 1969

3040-00-456-1628
Mechanical Drive Housing

004561628
11610582: RNCC: 3 | RNVC: 2

23 Apr 1969

3040-00-461-9795
Spur Gearshaft

004619795
215661: RNCC: 3 | RNVC: 2
215661: RNCC: 5 | RNVC: 1
215661: RNCC: 5 | RNVC: 9

23 Feb 1972

3040-00-461-9862
Spur Gearshaft

004619862
6005T95P04: RNCC: 3 | RNVC: 2
6005T95P04: RNCC: 5 | RNVC: 2

23 Feb 1972

3040-00-466-1165
Rigid Connecting Link

004661165
4G14384-101A: RNCC: 3 | RNVC: 2
4G14384: RNCC: D | RNVC: 9

8 Mar 1972

3040-00-466-2292
Rigid Connecting Link

004662292
252AS105: RNCC: 3 | RNVC: 2
252AS105: RNCC: 5 | RNVC: 2
252AS105: RNCC: 5 | RNVC: 2
252AS105: RNCC: 5 | RNVC: 2
252AS105: RNCC: 5 | RNVC: 2
252AS105: RNCC: 5 | RNVC: 2
252AS105: RNCC: 5 | RNVC: 2
252AS105: RNCC: 5 | RNVC: 2
252AS105: RNCC: 5 | RNVC: 2
252AS105: RNCC: 5 | RNVC: 9

23 Jan 1970

3040-00-471-1105
Shouldered Shaft

004711105
64C33478-11: RNCC: 3 | RNVC: 2
64C33478-11: RNCC: 3 | RNVC: 9

19 Aug 1970

3040-00-473-9885
Straight Shaft

004739885
045A0332F084A: RNCC: 3 | RNVC: 2
A1978PC72: RNCC: 5 | RNVC: 9

7 Jun 1974

3040-00-477-0239
Shouldered Shaft

004770239
731794-1: RNCC: 3 | RNVC: 2
681139-1: RNCC: 5 | RNVC: 2

12 Jun 1974

3040-00-477-9098
Counterbalance Weight

004779098
579-1005-03: RNCC: 3 | RNVC: 2

11 May 1970

3040-00-480-5872
Thrust Bearing Shoe

004805872
15-5065-11: RNCC: 3 | RNVC: 2
46-5065PC11: RNCC: 5 | RNVC: 2
652A975PC127: RNCC: 5 | RNVC: 9
652A975PC127: RNCC: 5 | RNVC: 9
652A975PC127: RNCC: C | RNVC: 1
652A975PC127: RNCC: C | RNVC: 1

2 Sep 1970

3040-00-480-9038
Rigid Connecting Link

004809038
212-030-355-1: RNCC: 3 | RNVC: 2
212-030-355-001: RNCC: 5 | RNVC: 2

8 Sep 1970

3040-00-484-1452
Spur Gearshaft

004841452
3014409: RNCC: 3 | RNVC: 2

21 May 1969

3040-00-488-3813
Control Cam

004883813
2526489: RNCC: 3 | RNVC: 2
2526489: RNCC: 5 | RNVC: 9

4 Jun 1969

3040-00-489-9168
Rigid Connecting Link

004899168
65B33633: RNCC: 3 | RNVC: 9

24 Sep 1969

3040-00-490-4858
Worm Shaft

004904858
W21562: RNCC: 3 | RNVC: 2

22 Sep 1969

3040-00-491-0681
Rigid Connecting Link

004910681
AM271-25: RNCC: 3 | RNVC: 2
114SS670-11: RNCC: 5 | RNVC: 2

26 Sep 1969

3040-00-492-4305
Straight Shaft

004924305
000993-759-1: RNCC: 3 | RNVC: 2
691-4937-01: RNCC: 5 | RNVC: 9
69B4937-1: RNCC: 5 | RNVC: 9
402-1300-03: RNCC: 5 | RNVC: 9
69B4937-1: RNCC: 5 | RNVC: 9
69B4937-1: RNCC: 5 | RNVC: 9

30 Sep 1970

3040-00-494-8650
Control Cam

004948650
810392-3: RNCC: 3 | RNVC: 9
810392-3: RNCC: C | RNVC: 1

9 Jun 1969

3040-00-491-5471
Rotating Shaft Eye Bracket

004915471
11838548: RNCC: 3 | RNVC: 2

6 Jun 1969

3040-00-498-3899
Shouldered Shaft

004983899
8626101: RNCC: 3 | RNVC: 2

8 Oct 1969

3040-00-505-1885
Shouldered Shaft

005051885
2487654: RNCC: 3 | RNVC: 2
2487654: RNCC: 5 | RNVC: 2
2487654: RNCC: 5 | RNVC: 9
2487654: RNCC: C | RNVC: 1

20 Jul 1974

3040-00-531-4350
Nozzle Segment Augmentor Hinge

005314350
4036748: RNCC: 3 | RNVC: 2
4036748: RNCC: 3 | RNVC: 9
4036748: RNCC: 5 | RNVC: 2
4036748: RNCC: 5 | RNVC: 9
4036748: RNCC: 5 | RNVC: 9
4036748: RNCC: 5 | RNVC: 9
4036748: RNCC: 5 | RNVC: 9
3040PL0664045: RNCC: 6 | RNVC: 9

11 Sep 1974

3040-00-509-6764
Control Cam

005096764
351630: RNCC: 3 | RNVC: 2
351630: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-510-4084
Bell Crank

005104084
4041654: RNCC: 3 | RNVC: 9
4041654: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-513-1006
Friction Lining

005131006
26314: RNCC: 3 | RNVC: 2
26314: RNCC: 5 | RNVC: 2
26314: RNCC: 5 | RNVC: 9
26314: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-514-2871
Piston Ring

005142871
27137773: RNCC: 3 | RNVC: 2
27137773: RNCC: 5 | RNVC: 9
27137773: RNCC: 5 | RNVC: 9

7 Aug 1974

3040-00-517-4764
Shaft Collar

005174764
5174764: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-515-7131
Rigid Connecting Link

005157131
5157131: RNCC: 3 | RNVC: 2
1015-515-7131: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-563-8423
Linear Actuating Cylinder Assembly Parts Kit

005638423
1543019C1 AND 1543273C1: RNCC: 3 | RNVC: 2
C107316: RNCC: 3 | RNVC: 2
G107524: RNCC: 5 | RNVC: 9
G107525: RNCC: 5 | RNVC: 9
G34331: RNCC: 5 | RNVC: 9
G35221: RNCC: 5 | RNVC: 9

17 Nov 1974

3040-00-568-9622
Pawl

005689622
111543: RNCC: 3 | RNVC: 2
111543: RNCC: 3 | RNVC: 2
343AS304: RNCC: 5 | RNVC: 9
64A97C14-1: RNCC: 7 | RNVC: 2
343AS304: RNCC: C | RNVC: 1
343AS304: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-570-4201
Straight Shaft

005704201
338343-1: RNCC: 3 | RNVC: 2
338343: RNCC: D | RNVC: 9

1 Jan 1963

3040-00-570-7373
Manual Control Lever

005707373
151897: RNCC: 3 | RNVC: 2
151897: RNCC: 3 | RNVC: 9
151897: RNCC: 5 | RNVC: 9
151897: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-575-6913
Rigid Connecting Link

005756913
4F53058-125A: RNCC: 3 | RNVC: 2

19 Jan 1968

3040-00-575-9267
Main Gear Coupling

005759267
6-84501-4: RNCC: 3 | RNVC: 2
6-84501: RNCC: D | RNVC: 9

11 Dec 1974

3040-00-598-9808
Spur Gearshaft

005989808
105D3518: RNCC: 3 | RNVC: 2

16 Jan 1975

3040-00-600-2132
Rigid Connecting Link

006002132
13-31107-1: RNCC: 3 | RNVC: 2
13-31107-1: RNCC: 5 | RNVC: 2
13-31107-1: RNCC: 5 | RNVC: 2
13-31107-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-594-3023
Straight Shaft

005943023
DS-932225: RNCC: 3 | RNVC: 2
DS-932225: RNCC: 5 | RNVC: 2
DS-932226: RNCC: 5 | RNVC: 9
2958: RNCC: 5 | RNVC: 9
2958: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-600-6303
Rigid Connecting Link

006006303
356869-3: RNCC: 3 | RNVC: 2
356869-3: RNCC: 5 | RNVC: 2
356869-11: RNCC: 5 | RNVC: 9
356869-3: RNCC: 5 | RNVC: 9
356869-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-606-2853
Straight Shaft

006062853
11671051: RNCC: 3 | RNVC: 2

30 Jan 1975

3040-00-619-9712
Remote Control Lever

006199712
8694026: RNCC: 3 | RNVC: 2
2530006199712: RNCC: 5 | RNVC: 9
2530006199712: RNCC: 6 | RNVC: 9

22 Feb 1975

3040-00-622-7247
Remote Control Lever

006227247
8763777: RNCC: 3 | RNVC: 2

1 Mar 1975

3040-00-623-6530
Bell Crank

006236530
373959-3: RNCC: 3 | RNVC: 2
373959-1L: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-624-5127
Shouldered Shaft

006245127
204-001-326-009: RNCC: 3 | RNVC: 2
204-001-326-9: RNCC: 5 | RNVC: 2
204-001-326-9: RNCC: 5 | RNVC: 9
204-001-326-9: RNCC: 8 | RNVC: 2

1 Jan 1963

3040-00-625-1190
Thrust Bearing Shoe

006251190
9-4115-1: RNCC: 3 | RNVC: 2
464115PC1-2-3: RNCC: 5 | RNVC: 2
652A975PC162: RNCC: 5 | RNVC: 2
466849PC1-2-3: RNCC: 5 | RNVC: 2
441B520PC152: RNCC: 5 | RNVC: 2
464384PC1T03: RNCC: 5 | RNVC: 2
464115PC1T03: RNCC: 5 | RNVC: 2
652A975PC122: RNCC: 5 | RNVC: 2
652A975PC113: RNCC: 5 | RNVC: 2
000-010-097: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-625-3976
Control Cam

006253976
373555-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-627-2041
Shouldered Shaft

006272041
19657-3: RNCC: 3 | RNVC: 9
19657-3: RNCC: 5 | RNVC: 2
19657-3: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-628-7948
Shouldered Shaft

006287948
514812: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-651-8194
Crew Actuator Assembly

006518194
50-2431-7: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-654-6661
Spur Gearshaft

006546661
40530: RNCC: 3 | RNVC: 2
40530: RNCC: 5 | RNVC: 2
40530: RNCC: 5 | RNVC: 2
40530: RNCC: 5 | RNVC: 9
40530: RNCC: 5 | RNVC: 9
40530: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-671-3888
Helical Gearshaft

006713888
E4498: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-673-0911
Shouldered Shaft

006730911
333136: RNCC: 3 | RNVC: 2
333136: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-677-8455
Mechanical Drive Housing

006778455
103558: RNCC: 3 | RNVC: 9
103558: RNCC: C | RNVC: 1

1 Jan 1961

3040-00-678-3021
Bell Crank

006783021
8762291: RNCC: 3 | RNVC: 2
3040006783021: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-678-3255
Shouldered Shaft

006783255
8761287: RNCC: 3 | RNVC: 2
2930006783255: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-682-5098
Linear Actuating Cylinder Assembly Parts Kit

006825098
1132: RNCC: 3 | RNVC: 2
1132: RNCC: 3 | RNVC: 9
KF1132: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-689-3417
Mechanical Drive Housing

006893417
11636091: RNCC: 3 | RNVC: 2
1025-689-3417: RNCC: 6 | RNVC: 9

8 Feb 1971

3040-00-692-3264
Shouldered Shaft

006923264
135196-1: RNCC: 3 | RNVC: 2
135196-1: RNCC: 5 | RNVC: 9
135196-1: RNCC: 5 | RNVC: 9
135196: RNCC: 5 | RNVC: 9
135196: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-694-8800
Spur Gearshaft

006948800
36463: RNCC: 3 | RNVC: 2
36463: RNCC: 5 | RNVC: 2
36463: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-704-9317
Spur Gearshaft

007049317
350805-2: RNCC: 3 | RNVC: 2
350805-2: RNCC: 5 | RNVC: 9
350805-2: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-710-0724
Straight Shaft

007100724
A1-22: RNCC: 3 | RNVC: 2
G2-18: RNCC: 5 | RNVC: 2
SS-11: RNCC: 5 | RNVC: 2
S2-22: RNCC: 5 | RNVC: 9
ES1670-11: RNCC: 5 | RNVC: 9
10106744: RNCC: 6 | RNVC: 9
C534-11: RNCC: 7 | RNVC: 2
13307390-001: RNCC: 7 | RNVC: 2
13307390: RNCC: D | RNVC: 9

1 Jan 1963

3040-00-713-7509
Rigid Connecting Link

007137509
2-13686-1: RNCC: 3 | RNVC: 9
2-13686-1: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-719-9243
Shouldered Shaft

007199243
35-79501-1006-2: RNCC: 3 | RNVC: 2
357950110062: RNCC: 5 | RNVC: 9
GB1826: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-724-0971
Worm Shaft

007240971
149D6001: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-725-1745
Remote Control Lever

007251745
1303785: RNCC: 3 | RNVC: 2
501151: RNCC: 5 | RNVC: 9
1303785: RNCC: 5 | RNVC: 9
317687: RNCC: 5 | RNVC: 9
317686: RNCC: 5 | RNVC: 9
1006087-P1: RNCC: C | RNVC: 1
317686: RNCC: D | RNVC: 9

14 Feb 1968

3040-00-726-1924
Rigid Connecting Link

007261924
2-50436-1: RNCC: 3 | RNVC: 2
2-50436-1: RNCC: 3 | RNVC: 9
2-50436-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-726-2906
Control Cam

007262906
4022T99P01: RNCC: 3 | RNVC: 2

31 Mar 1972

3040-00-727-2387
Rigid Connecting Link

007272387
2-50436-3: RNCC: 3 | RNVC: 2
2-50436-3: RNCC: 3 | RNVC: 9
2-50436-3: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-734-5291
Mechanical Drive Housing

007345291
8351543: RNCC: 3 | RNVC: 2
8351543: RNCC: 5 | RNVC: 2
2520007345291: RNCC: 6 | RNVC: 9
3040007345291: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-740-9372
Rigid Connecting Link

007409372
7409372: RNCC: 3 | RNVC: 2
3040007409372: RNCC: 5 | RNVC: 9
KC6472: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-740-9592
Shouldered Shaft

007409592
11P47: RNCC: 3 | RNVC: 2
11P47: RNCC: 5 | RNVC: 2
7409592: RNCC: 5 | RNVC: 2
319998: RNCC: 5 | RNVC: 9
KC1717: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-741-1161
Straight Shaft

007411161
304442: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-758-7624
Bell Crank

007587624
S6140-66602-005: RNCC: 3 | RNVC: 2

5 Apr 1972

3040-00-759-6848
Remote Control Lever

007596848
69-10781-2: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-761-8995
Straight Shaft

007618995
A3-36: RNCC: 3 | RNVC: 2
SS136: RNCC: 3 | RNVC: 2
69120-222: RNCC: C | RNVC: 1

25 Mar 1967

3040-00-764-4715
Shouldered Shaft

007644715
123HM10184-511: RNCC: 3 | RNVC: 2
123HM10184-511: RNCC: 5 | RNVC: 9

7 Oct 1972

3040-00-765-9949
Counterbalance Weight

007659949
393513CL1: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-768-2073
Spur Gearshaft

007682073
358034: RNCC: 3 | RNVC: 2
358034: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-768-6278
Wing Chain Assembly

007686278
25-3443-1: RNCC: 3 | RNVC: 2
25-3443-1: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-771-8676
Brake Disc

007718676
AS102384: RNCC: 3 | RNVC: 2
AS102384: RNCC: 3 | RNVC: 9
AS94117: RNCC: 5 | RNVC: 9
AS102384: RNCC: 5 | RNVC: 9
AS94117: RNCC: 5 | RNVC: 9
AS1023J4: RNCC: 5 | RNVC: 9
AS102384: RNCC: 5 | RNVC: 9
AS94117: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-772-1464
Remote Control Lever

007721464
3-64162-501: RNCC: 3 | RNVC: 2
3-64162-501: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-775-7654
Rigid Connecting Link

007757654
4F21405-101C: RNCC: 3 | RNVC: 2
4F21405-101A: RNCC: 5 | RNVC: 9

13 Mar 1968

3040-00-775-4772
Piston Ring

007754772
2-1257-14: RNCC: 3 | RNVC: 2
2-1257-14: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-776-7535
Shouldered Shaft

007767535
6761293: RNCC: 3 | RNVC: 2
7767535: RNCC: 5 | RNVC: 2
3040007767535: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-778-4870
Shouldered Shaft

007784870
CAFB6802L: RNCC: 3 | RNVC: 2
CAFB6802L: RNCC: 3 | RNVC: 9
16202029: RNCC: 5 | RNVC: 9
NAFB6802L: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-779-7970
Bell Crank

007797970
5-97095-9: RNCC: 3 | RNVC: 2
5-97095-9: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-787-1534
Linear Actuating Cylinder

007871534
55B21257: RNCC: 3 | RNVC: 2
2C1755A: RNCC: 5 | RNVC: 2
2C1755A: RNCC: 5 | RNVC: 2
55B21257: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-790-3971
Straight Shaft

007903971
416212: RNCC: 3 | RNVC: 9
416212: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-784-4691
Counterbalance Weight

007844691
402003CL1: RNCC: 3 | RNVC: 2
402003CL1: RNCC: 5 | RNVC: 2
402003CL1: RNCC: 5 | RNVC: 2
402003CL1: RNCC: 5 | RNVC: 2
402003CL1: RNCC: 5 | RNVC: 2
402003CL1: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-792-6913
Linear Actuating Cylinder Assembly Parts Kit

007926913
1251: RNCC: 3 | RNVC: 2
4515031: RNCC: 5 | RNVC: 9
1251: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-794-4900
Linear Actuating Cylinder Assembly Parts Kit

007944900
CR4-5: RNCC: 3 | RNVC: 2
KC575: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-796-8358
Spur Gearshaft

007968358
01-11714: RNCC: 3 | RNVC: 2
01-11714: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-797-0326
Rigid Connecting Link

007970326
14711-407: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-797-0261
Bell Crank

007970261
14711-404: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-797-0143
Rigid Connecting Link

007970143
14711-309: RNCC: 3 | RNVC: 2
14711-309: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-00-798-4201
Shouldered Shaft

007984201
14711-526: RNCC: 3 | RNVC: 2
14711-526: RNCC: 3 | RNVC: 9

1 Jan 1960

3040-00-799-0273
Shouldered Shaft

007990273
556187: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-802-9362
Control Cam

008029362
37C311055P101: RNCC: 3 | RNVC: 2
37C301794P101: RNCC: 5 | RNVC: 9
37C311055P101: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-802-4446
Rigid Connecting Link

008024446
907330-1: RNCC: 3 | RNVC: 2
907330-1: RNCC: 5 | RNVC: 2
907330-1: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-806-6085
Hatch Shaft

008066085
914579-1: RNCC: 3 | RNVC: 2
914597-1: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-806-5583
Rigid Connecting Link

008065583
923069-3: RNCC: 3 | RNVC: 2
923069-3: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-816-6349
Helical Gearshaft

008166349
10888209: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-816-6355
Shouldered Shaft

008166355
10888212: RNCC: 3 | RNVC: 2
10888212: RNCC: 5 | RNVC: 9
3040008166355: RNCC: 6 | RNVC: 9

1 Jan 1962

3040-00-822-2430
Control Cam

008222430
82377-01: RNCC: 3 | RNVC: 9
82377: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-827-8477
Spur Gearshaft

008278477
1872339-2: RNCC: 3 | RNVC: 9
1872339-2: RNCC: 5 | RNVC: 9

25 Aug 1967

3040-00-830-5912
Counterbalance Weight

008305912
393514CL9: RNCC: 3 | RNVC: 2
393514CL9: RNCC: 5 | RNVC: 2
393514CL9: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-834-4366
Rigid Connecting Link

008344366
4F22410-101A: RNCC: 3 | RNVC: 2
4F23685-101A: RNCC: 5 | RNVC: 2
4F22410: RNCC: D | RNVC: 9
4F23685: RNCC: D | RNVC: 9

13 Sep 1967

3040-00-755-1140
Bevel Gearshaft

007551140
511716: RNCC: 3 | RNVC: 2
511716: RNCC: 5 | RNVC: 2
511716: RNCC: 5 | RNVC: 9
511716: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-754-4064
Straight Shaft

007544064
4F55194-109A: RNCC: 3 | RNVC: 2
4F55194-101A: RNCC: 5 | RNVC: 9
4F55194-101B: RNCC: 5 | RNVC: 9

1 Mar 1968

3040-00-762-4507
Mechanical Drive Housing

007624507
8351034: RNCC: 3 | RNVC: 2
715300: RNCC: 5 | RNVC: 2
8357184: RNCC: 5 | RNVC: 9

20 Feb 1970

3040-00-450-0797
Linear Actuating Cylinder Piston

004500797
92742-1: RNCC: 3 | RNVC: 2

7 May 1971

3040-00-451-0334
Shouldered Shaft

004510334
2587664: RNCC: 3 | RNVC: 2
2587664: RNCC: 5 | RNVC: 2

10 May 1971

3040-00-457-6675
Linear Actuating Cylinder Assembly Parts Kit

004576675
PK152HLL01: RNCC: 3 | RNVC: 2

10 Sep 1969

3040-00-458-1279
Manual Control Lever

004581279
CL200PC: RNCC: 3 | RNVC: 2

30 Apr 1969

3040-00-467-8214
Shouldered Shaft

004678214
754-2-24487: RNCC: 3 | RNVC: 2

8 May 1970

3040-00-470-7365
Cage Rod Seal Assem

004707365
051-KR012-100: RNCC: 3 | RNVC: 2
051KR012-100: RNCC: 3 | RNVC: 9
102-4340-10-00012-00: RNCC: 5 | RNVC: 9

30 Jan 1970

3040-00-473-3212
Resilient Element

004733212
803-2145600-PC25: RNCC: 3 | RNVC: 2
42553-7PCA3: RNCC: 5 | RNVC: 2
2900-224PC11: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-477-9919
Shouldered Shaft

004779919
5146721: RNCC: 3 | RNVC: 2
8922967 AND 8922970: RNCC: 3 | RNVC: 2
5148259: RNCC: 5 | RNVC: 9
K-5146721: RNCC: 5 | RNVC: 9
5146721: RNCC: 5 | RNVC: 9
5146721: RNCC: 5 | RNVC: 9
5146721: RNCC: C | RNVC: 1

8 Mar 1972

3040-00-479-9128
Control Cam

004799128
C5B29224: RNCC: 3 | RNVC: 2
C5B29224: RNCC: 5 | RNVC: 9

26 Aug 1970

3040-00-478-8801
Shouldered Shaft

004788801
5N4378: RNCC: 3 | RNVC: 2
6129080: RNCC: 5 | RNVC: 2
3N7716: RNCC: 5 | RNVC: 9
6L9080: RNCC: 5 | RNVC: 9

2 Feb 1970

3040-00-478-3842
Rigid Connecting Link

004783842
108763-1: RNCC: 3 | RNVC: 2

16 Jun 1971

3040-00-479-3932
Shouldered Axle

004793932
416540-1: RNCC: 3 | RNVC: 2
416540-1: RNCC: 5 | RNVC: 2
416540-1: RNCC: 5 | RNVC: 2
416540-1: RNCC: 5 | RNVC: 2
416540-1: RNCC: 5 | RNVC: 2
416540-1: RNCC: 5 | RNVC: 2
416540-1: RNCC: 5 | RNVC: 2

4 Feb 1970

3040-00-480-7361
Straight Shaft

004807361
8619618: RNCC: 3 | RNVC: 2

14 Sep 1970

3040-00-482-7145
Spur Gearshaft

004827145
2584244: RNCC: 3 | RNVC: 2
2584244: RNCC: 5 | RNVC: 9

22 Jan 1971

3040-00-483-1982
Rigid Connecting Link

004831982
MBEU2035GRU5: RNCC: 3 | RNVC: 2

1 Feb 1971

3040-00-484-3649
Remote Control Lever

004843649
10870326: RNCC: 3 | RNVC: 2
3040004843649: RNCC: 5 | RNVC: 9
30404843649: RNCC: 5 | RNVC: 9

23 May 1969

3040-00-484-3761
Rigid Connecting Link

004843761
65652-11215: RNCC: 3 | RNVC: 2
65652-11215-042: RNCC: 3 | RNVC: 2
65652-11215-042: RNCC: 5 | RNVC: 2
65652-11215-042: RNCC: 5 | RNVC: 2
65652-11215-042: RNCC: 5 | RNVC: 9
65652-11215-042: RNCC: 5 | RNVC: 9

23 May 1969

3040-00-484-1451
Shouldered Shaft

004841451
3014407: RNCC: 3 | RNVC: 2

21 May 1969

3040-00-487-4446
Multiple Gears Gearshaft

004874446
3015866: RNCC: 3 | RNVC: 2

2 Jun 1969

3040-00-490-5604
Nonrotating Shaft Eye Bracket

004905604
8626127: RNCC: 3 | RNVC: 2

24 Sep 1969

3040-00-489-9911
Bell Crank

004899911
212-060-777-001: RNCC: 3 | RNVC: 2
212-060-777-001: RNCC: 5 | RNVC: 2
212-060-777-1: RNCC: 5 | RNVC: 9

17 Sep 1969

3040-00-492-0720
Pawl

004920720
18410: RNCC: 3 | RNVC: 9
18410: RNCC: 5 | RNVC: 2
18410: RNCC: 5 | RNVC: 9
18410: RNCC: 5 | RNVC: 9

2 Jul 1974

3040-00-491-5472
Spur Gearshaft

004915472
11838556: RNCC: 3 | RNVC: 2

6 Jun 1969

3040-00-487-4518
Straight Shaft

004874518
26-3454: RNCC: 3 | RNVC: 2

22 Jun 1974

3040-00-499-0624
Rigid Connecting Link

004990624
212-060-724-41: RNCC: 3 | RNVC: 2
212-060-724-041: RNCC: 5 | RNVC: 1
212-060-724-41: RNCC: 5 | RNVC: 9
212-060-724-41: RNCC: 5 | RNVC: 9
212-060-724: RNCC: D | RNVC: 9

13 Oct 1969

3040-00-499-5490
Manual Control Lever

004995490
205-030-727-2: RNCC: 3 | RNVC: 2

23 Jun 1971

3040-00-507-3231
Straight Shaft

005073231
10298600: RNCC: 3 | RNVC: 2
102986: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-507-9978
Flexible Shaft Assembly Core

005079978
MS51072-15: RNCC: 2 | RNVC: 2
MIL-DTL-10215: RNCC: 4 | RNVC: 1
7984853: RNCC: 5 | RNVC: 1
1581832: RNCC: 5 | RNVC: 1
MIL-S-10215: RNCC: 5 | RNVC: 9
1581832: RNCC: 5 | RNVC: 9
6680005079978: RNCC: 5 | RNVC: 9
6680005079978: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-517-5237
Flexible Shaft Assembly

005175237
GFS-103500: RNCC: 3 | RNVC: 2
6520-111-96: RNCC: 5 | RNVC: 9
6520-111-96: RNCC: 5 | RNVC: 9
1120-96: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-522-5858
Shouldered Shaft

005225858
96265-1: RNCC: 3 | RNVC: 2
96265-1: RNCC: 5 | RNVC: 9
96265-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-528-1520
Rigid Connecting Link

005281520
6-39196-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-529-1412
Pump Drive Shaft

005291412
214-040-431-1: RNCC: 3 | RNVC: 2
214-040-431-001: RNCC: 5 | RNVC: 2

28 Aug 1974

3040-00-536-4174
Control Cam

005364174
357014-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-538-1400
Shaft Collar

005381400
5381400: RNCC: 3 | RNVC: 2
30405381400: RNCC: 5 | RNVC: 9
3040005381400: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-547-7182
Shouldered Shaft

005477182
117D2915: RNCC: 3 | RNVC: 2
3040PL0664054: RNCC: 6 | RNVC: 9

12 Oct 1974

3040-00-554-7438
Rigid Connecting Link

005547438
339399-4: RNCC: 3 | RNVC: 2
339399-4: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-571-0736
Straight Shaft

005710736
268802: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-586-8631
Rigid Connecting Link

005868631
90-2423-11: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-589-2653
Straight Shaft

005892653
100881: RNCC: 3 | RNVC: 2

28 Dec 1974

3040-00-596-4120
Rigid Connecting Link

005964120
SM-C-657339: RNCC: 3 | RNVC: 2
SM-C-657339: RNCC: 5 | RNVC: 9
SM-C-657339: RNCC: 5 | RNVC: 9

10 Jan 1975

3040-00-600-2405
Rigid Connecting Link

006002405
4012285-1: RNCC: 3 | RNVC: 9
4012285-1: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-602-9505
Manual Control Lever

006029505
P6012: RNCC: 3 | RNVC: 2
P6012: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-605-9684
Shouldered Shaft

006059684
29-5656-2: RNCC: 3 | RNVC: 2
29-5656-2: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-607-2811
Rigid Connecting Link

006072811
5027T79G01: RNCC: 3 | RNVC: 2

30 Jan 1975

3040-00-607-2787
Shouldered Shaft

006072787
105D3505: RNCC: 3 | RNVC: 2

30 Jan 1975

3040-00-613-6793
Pawl

006136793
11671273: RNCC: 3 | RNVC: 2

8 Feb 1975

3040-00-613-3225
A Planet Gear Shaft

006133225
40A552: RNCC: 3 | RNVC: 2
40A552: RNCC: 5 | RNVC: 9
40A552: RNCC: 5 | RNVC: 9
40A552: RNCC: 5 | RNVC: 9

5 Feb 1975

3040-00-622-0532
Straight Shaft

006220532
373966-3: RNCC: 3 | RNVC: 2
373966-3: RNCC: 3 | RNVC: 2
373966-3: RNCC: 5 | RNVC: 2
373966-3: RNCC: 5 | RNVC: 2
373966-3: RNCC: 5 | RNVC: 2
373966-1: RNCC: 5 | RNVC: 9
373966-1: RNCC: 5 | RNVC: 9
373966: RNCC: D | RNVC: 9

1 Jan 1963

3040-00-624-5146
Rigid Connecting Link

006245146
204-001-012-029: RNCC: 3 | RNVC: 2
204-001-012-29: RNCC: 5 | RNVC: 9
204-001-012-29: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-625-2986
Shaft Collar

006252986
10867074: RNCC: 3 | RNVC: 2

5 Mar 1975

3040-00-625-6632
Bell Crank

006256632
6-73883-2: RNCC: 3 | RNVC: 2
6-73883-1: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-625-8578
Rigid Connecting Link

006258578
374536-1: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-627-5382
Spur Gearshaft

006275382
10017: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-632-7904
Straight Shaft

006327904
800057-3: RNCC: 3 | RNVC: 2
800057-3: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-633-7550
Rigid Connecting Link

006337550
737676: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-650-5679
Prop Shaft Bolt

006505679
6819694: RNCC: 3 | RNVC: 2
6819694: RNCC: 5 | RNVC: 2
6819694: RNCC: 5 | RNVC: 2
6819694: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-652-1608
Manual Control Lever

006521608
154066: RNCC: 3 | RNVC: 2
154066: RNCC: 5 | RNVC: 2
154066: RNCC: 5 | RNVC: 9
154066: RNCC: 5 | RNVC: 9
154066: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-656-3838
Remote Control Lever

006563838
98119: RNCC: 3 | RNVC: 2
98119-3: RNCC: 5 | RNVC: 9
98119: RNCC: 5 | RNVC: 9
98119: RNCC: D | RNVC: 9
98119-3: RNCC: D | RNVC: 9
98119-3: RNCC: D | RNVC: 9

1 Jan 1963

3040-00-652-7605
Shouldered Shaft

006527605
29-6347-501: RNCC: 3 | RNVC: 2
29-6347-501: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-659-3104
Manual Control Lever

006593104
156673: RNCC: 3 | RNVC: 2
156673: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-671-5375
Shouldered Shaft

006715375
76081: RNCC: 3 | RNVC: 2
76081: RNCC: 5 | RNVC: 9
CM-76081: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-674-4947
Straight Shaft

006744947
354574: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-674-6398
Counterbalance Weight

006746398
358195CL1: RNCC: 3 | RNVC: 2
358195CLASS1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-674-6970
Flexible Drive Shaft

006746970
5195722: RNCC: 3 | RNVC: 2
SA30: RNCC: 3 | RNVC: 2
SB-O252B: RNCC: 3 | RNVC: 2
SA30B: RNCC: 5 | RNVC: 2
SA252B: RNCC: 5 | RNVC: 9
5195722: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-675-8467
Rigid Connecting Link

006758467
6-63233-4: RNCC: 3 | RNVC: 2
6-63233-4: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-678-3266
Body Hub

006783266
8761050: RNCC: 3 | RNVC: 2
2930006783266: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-689-3029
Shaft Retaining Plate

006893029
5170450: RNCC: 3 | RNVC: 2
5170450: RNCC: 5 | RNVC: 2
1DD948: RNCC: 5 | RNVC: 2
1DD948: RNCC: 5 | RNVC: 9

25 Mar 1972

3040-00-690-1223
Straight Shaft

006901223
10867123: RNCC: 3 | RNVC: 2
3040006901223: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-693-0974
Crank Shaft

006930974
J3208-1: RNCC: 3 | RNVC: 9
8376592: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-700-3832
Bevel Gearshaft

007003832
S6135-66223: RNCC: 3 | RNVC: 2
S6135-66223-000: RNCC: 5 | RNVC: 1
S6135-66223-000: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-701-1910
Straight Shaft

007011910
1867-501-017-3: RNCC: 3 | RNVC: 1
1867-501-017-3CP: RNCC: 5 | RNVC: 1
1667-501-017-3CP: RNCC: 5 | RNVC: 1
1867-501-017-3CP: RNCC: 5 | RNVC: 2

9 Feb 1968

3040-00-702-2311
Torsion Spring Latch Shaft

007022311
4F55189-101A: RNCC: 3 | RNVC: 2

2 Feb 1968

3040-00-704-3962
Shouldered Shaft

007043962
1855C20: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-706-1266
Shouldered Shaft

007061266
9P21: RNCC: 3 | RNVC: 2
7061266: RNCC: 5 | RNVC: 2
9P21: RNCC: 5 | RNVC: 9
914862: RNCC: 5 | RNVC: 9
2564T2: RNCC: 5 | RNVC: 9
KC1716: RNCC: 5 | RNVC: 9
KC1716: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-710-2350
Rigid Connecting Link

007102350
2-40413-1: RNCC: 3 | RNVC: 9
2-40413-1: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-710-2379
Rigid Connecting Link

007102379
2-73332-1: RNCC: 3 | RNVC: 2
SR10522A501: RNCC: 5 | RNVC: 2
2-73332-1: RNCC: 5 | RNVC: 2
2-73332-1: RNCC: 5 | RNVC: 2
2-73332-1: RNCC: 5 | RNVC: 2
2-73332-1: RNCC: 5 | RNVC: 2
2-73332-1: RNCC: 5 | RNVC: 2
2-73332-1: RNCC: 5 | RNVC: 2
2-73332-1: RNCC: 5 | RNVC: 2
2-73332-1: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-732-8000
Control Cam

007328000
9194046: RNCC: 3 | RNVC: 2
9194046: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-733-4156
Remote Control Lever

007334156
35-17028-1: RNCC: 3 | RNVC: 2
35-8614-502: RNCC: 5 | RNVC: 9
35-17028: RNCC: D | RNVC: 9

1 Jan 1963

3040-00-734-6803
Shouldered Shaft

007346803
2843F266: RNCC: 3 | RNVC: 9
7346803: RNCC: 5 | RNVC: 2
2843F266: RNCC: 5 | RNVC: 9
2520007346803: RNCC: 5 | RNVC: 9
KC5235: RNCC: 5 | RNVC: 9
2520007346803: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-734-8746
Straight Shaft

007348746
7348746: RNCC: 3 | RNVC: 2
2520007348746: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-735-4241
Linear Actuating Cylinder Piston

007354241
8351645: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-735-9095
Mechanical Drive Housing

007359095
8351629: RNCC: 3 | RNVC: 2
8351629: RNCC: 5 | RNVC: 2
2520007359095: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-738-4623
Rigid Connecting Link

007384623
4F51653-101A: RNCC: 3 | RNVC: 2

23 Feb 1968

3040-00-740-9546
Rigid Connecting Link

007409546
8332233: RNCC: 3 | RNVC: 2
115454R91: RNCC: 5 | RNVC: 9
115454R91: RNCC: 5 | RNVC: 9
2520007409546: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-754-0472
Manual Control Lever

007540472
6764671: RNCC: 3 | RNVC: 2
7540472: RNCC: 3 | RNVC: 2
6764671: RNCC: 5 | RNVC: 9
2520007540472: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-765-8944
Counterbalance Weight

007658944
387384CL7: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-766-5024
Rigid Connecting Link

007665024
4F55662-101A: RNCC: 3 | RNVC: 2

15 Mar 1968

3040-00-766-8633
Shouldered Shaft Assembly

007668633
1-080-350-04: RNCC: 3 | RNVC: 9
1-080-350-04: RNCC: C | RNVC: 1

1 Jan 1962

3040-00-767-5133
Bell Crank

007675133
25-31782-2: RNCC: 3 | RNVC: 2
25-31782-1: RNCC: E | RNVC: 8

8 Mar 1968

3040-00-768-3102
Rigid Connecting Link

007683102
2-13432-2: RNCC: 3 | RNVC: 9
2-13432-2: RNCC: 5 | RNVC: 9
2-13432-2: RNCC: C | RNVC: 1

1 Jan 1962

3040-00-775-1380
Bell Crank

007751380
5115322: RNCC: 3 | RNVC: 2
5115322: RNCC: 5 | RNVC: 9
PC5115322: RNCC: 5 | RNVC: 9
2910007751380: RNCC: 5 | RNVC: 9
5115322: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-778-3468
Spline Adapter

007783468
31220-1017: RNCC: 3 | RNVC: 2
31220-1017: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-781-5622
Shouldered Shaft

007815622
5133680: RNCC: 3 | RNVC: 2
5133680: RNCC: 5 | RNVC: 9
PC5133680: RNCC: 5 | RNVC: 9
3040007815622: RNCC: 5 | RNVC: 9
K-5133680: RNCC: 5 | RNVC: 9
5133680: RNCC: C | RNVC: 1

20 Mar 1968

3040-00-782-4616
Spur Gearshaft

007824616
35706: RNCC: 3 | RNVC: 2
35706: RNCC: 5 | RNVC: 9
35706: RNCC: 5 | RNVC: 9
35706: RNCC: 5 | RNVC: 9
35706: RNCC: 5 | RNVC: 9

21 Apr 1972

3040-00-785-8672
Control Cam

007858672
7132945-01: RNCC: 3 | RNVC: 2
6-82056-2: RNCC: 5 | RNVC: 9
6-82056-2: RNCC: 5 | RNVC: 9
6-82056-2: RNCC: 5 | RNVC: 9
B7423-2: RNCC: 5 | RNVC: 9
6-82056-2: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-787-1536
Linear Actuating Cylinder Piston

007871536
55B21264: RNCC: 3 | RNVC: 2
2C1763: RNCC: 5 | RNVC: 2
2C1763: RNCC: 5 | RNVC: 2
55B21264: RNCC: 5 | RNVC: 2
50-19102: RNCC: 5 | RNVC: 9
55B21264: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-787-2751
Control Cam

007872751
875A523: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-791-2746
Rigid Connecting Link

007912746
14-73908-5: RNCC: 1 | RNVC: 2
SR10587A5: RNCC: 3 | RNVC: 2
14-73908-5: RNCC: 5 | RNVC: 2
14-73908-5: RNCC: 5 | RNVC: 2
14-73908-5: RNCC: 5 | RNVC: 2
14-73908-5: RNCC: 5 | RNVC: 2
SR10587A5: RNCC: 5 | RNVC: 2
SR10587A5: RNCC: 5 | RNVC: 9
3-73054-5: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-795-5141
Shouldered Shaft

007955141
3-54458-3: RNCC: 3 | RNVC: 9
3-54458-3: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-796-8360
Spur Gearshaft

007968360
01-11715: RNCC: 3 | RNVC: 2
01-11715: RNCC: 5 | RNVC: 9
01-11715: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-795-9413
Spur Gearshaft

007959413
500982: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-797-4004
Straight Shaft

007974004
DS-932631: RNCC: 3 | RNVC: 2
DS-932631: RNCC: 5 | RNVC: 2
3537: RNCC: 5 | RNVC: 9
3537: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-785-6351
Bevel Gearshaft

007856351
7383477: RNCC: 1 | RNVC: 2
679674: RNCC: 3 | RNVC: 2
SH8820A: RNCC: 3 | RNVC: 2
2910007856351: RNCC: 5 | RNVC: 9
3040007856351: RNCC: 6 | RNVC: 9
2910007856351: RNCC: 6 | RNVC: 9

1 Jan 1962

3040-00-802-5375
Rigid Connecting Link

008025375
906932-1: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-803-6725
Control Cam

008036725
37E501434P101: RNCC: 3 | RNVC: 2
37E501434P101: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-808-0061
Adjusting Shoe

008080061
800889-3: RNCC: 3 | RNVC: 2
800889-3: RNCC: 5 | RNVC: 2
800889-3: RNCC: 5 | RNVC: 9
800889-3: RNCC: 5 | RNVC: 9
800889-3: RNCC: C | RNVC: 1

1 Jan 1962

3040-00-808-0391
Control Cam

008080391
833613-1: RNCC: 3 | RNVC: 2
833613-1: RNCC: 5 | RNVC: 9
833613-1: RNCC: C | RNVC: 1

1 Jan 1962

3040-00-813-4435
Rotating Shaft Eye Bracket

008134435
4F61250-101B: RNCC: 3 | RNVC: 2

25 Mar 1968

3040-00-816-5428
Push-Pull Control Assembly

008165428
116-032-135: RNCC: 3 | RNVC: 2
117-032-30: RNCC: 5 | RNVC: 2
80770-0200-22: RNCC: 5 | RNVC: 2
116-032-135: RNCC: 5 | RNVC: 9
117-032-30: RNCC: 5 | RNVC: 9
80770-0200-22: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-814-1893
Control Cam

008141893
707212-2: RNCC: 3 | RNVC: 2
707212-2: RNCC: 3 | RNVC: 9

27 Mar 1968

3040-00-815-7360
Spur Gearshaft

008157360
136770-01: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-824-1387
Straight Shaft

008241387
695756: RNCC: 3 | RNVC: 2

16 Aug 1967

3040-00-816-8296
Shouldered Shaft

008168296
E8415M1: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-839-4236
Rigid Connecting Link

008394236
4J32050-101A: RNCC: 3 | RNVC: 2

15 Sep 1967

3040-00-841-6144
Shouldered Shaft

008416144
701200: RNCC: 3 | RNVC: 2

21 Dec 1966

3040-00-450-1620
Shouldered Shaft

004501620
2623014: RNCC: 3 | RNVC: 2
2623014: RNCC: 5 | RNVC: 2
2623014: RNCC: D | RNVC: 9

10 May 1971

3040-00-450-7856
Rigid Connecting Link

004507856
212-060-724-17: RNCC: 3 | RNVC: 2
212-060-724-17: RNCC: 3 | RNVC: 2
212-060-724-017: RNCC: 5 | RNVC: 2

17 Dec 1969

3040-00-450-7861
Rigid Connecting Link

004507861
212-060-724-31: RNCC: 3 | RNVC: 2
212-060-724-031: RNCC: 5 | RNVC: 2

17 Dec 1969

3040-00-451-6679
Shouldered Shaft

004516679
2623008: RNCC: 3 | RNVC: 2
2623008: RNCC: 5 | RNVC: 2

17 May 1971

3040-00-451-3312
Bell Crank

004513312
10031043-101: RNCC: 3 | RNVC: 9

14 May 1971

3040-00-456-1496
Rigid Connecting Link

004561496
11588997-2: RNCC: 3 | RNVC: 2
11588997-2: RNCC: 5 | RNVC: 2
11588997-2: RNCC: 5 | RNVC: 2

23 Apr 1969

3040-00-456-1627
Mechanical Drive Housing

004561627
11610577: RNCC: 3 | RNVC: 2

23 Apr 1969

3040-00-457-0304
Remote Control Lever

004570304
11610576: RNCC: 3 | RNVC: 2

28 Apr 1969

3040-00-457-0427
Long Sprocket Shaft

004570427
10191510: RNCC: 3 | RNVC: 2
10191510: RNCC: 5 | RNVC: 1
433-1881: RNCC: 6 | RNVC: 9

28 Apr 1969

3040-00-457-6791
Bevel Gearshaft

004576791
3222490: RNCC: 3 | RNVC: 2
3222490: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-460-2957
Rigid Connecting Link

004602957
209-001-207-1: RNCC: 3 | RNVC: 2

5 Jan 1970

3040-00-462-4927
Flexible Drive Shaft

004624927
416B870P43: RNCC: 1 | RNVC: 2
FAUSG11QX6: RNCC: 3 | RNVC: 2
8948X0A107-56: RNCC: 5 | RNVC: 9
8948X0A107-56: RNCC: 5 | RNVC: 9

7 May 1969

3040-00-463-7217
Shouldered Shaft

004637217
2481185: RNCC: 3 | RNVC: 2
2481185: RNCC: 5 | RNVC: 1
2481185: RNCC: 5 | RNVC: 9
2481170: RNCC: 5 | RNVC: 9
2481185: RNCC: D | RNVC: 9

1 Jan 1961

3040-00-491-5482
Bell Crank

004915482
11838565: RNCC: 3 | RNVC: 2

6 Jun 1969

3040-00-495-4509
Bevel Gearshaft

004954509
9609M89P08: RNCC: 3 | RNVC: 2
9609M89P11: RNCC: 3 | RNVC: 2
9686M94G02: RNCC: E | RNVC: 8

18 Jun 1971

3040-00-495-5168
Spur Gearshaft

004955168
5017T21P01: RNCC: 3 | RNVC: 2
5017T21P01: RNCC: 5 | RNVC: 9

23 Mar 1972

3040-00-488-1114
Linear Actuating Cylinder Head

004881114
6017169: RNCC: 3 | RNVC: 2
6017169: RNCC: 5 | RNVC: 9

4 Jun 1969

3040-00-500-9595
Manual Control Lever

005009595
5009595: RNCC: 3 | RNVC: 2
XX002-1580: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-500-9587
Linear Actuating Cylinder Head

005009587
5009587: RNCC: 3 | RNVC: 2
1015-500-9587: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-522-2563
Rigid Connecting Link

005222563
5222563: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-526-0861
Shouldered Shaft

005260861
102541: RNCC: 3 | RNVC: 2
965-102541: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-517-7756
Worm Shaft

005177756
5177756: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-518-6258
Counterbalance Weight

005186258
4044391: RNCC: 3 | RNVC: 2
4044391: RNCC: 3 | RNVC: 2

13 Aug 1974

3040-00-536-8836
Rigid Connecting Link

005368836
VE875S1: RNCC: 3 | RNVC: 2
VE549: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-540-8627
Flexible Drive Shaft

005408627
FAUSG11QX2: RNCC: 3 | RNVC: 2
416B870P11: RNCC: 5 | RNVC: 2
8948X0A37-25: RNCC: 5 | RNVC: 9
416B870P11: RNCC: 5 | RNVC: 9
8948X0A37-25: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-551-5630
Rigid Connecting Link

005515630
4G14523-101A: RNCC: 3 | RNVC: 2

22 Oct 1974

3040-00-575-4447
Yoke

005754447
736606: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-575-6900
Rigid Connecting Link

005756900
4F53058-121A: RNCC: 3 | RNVC: 2

19 Jan 1968

3040-00-575-7923
Shouldered Shaft

005757923
4F73176-101B: RNCC: 3 | RNVC: 2

19 Jan 1968

3040-00-591-8253
Combustion Rod Assy

005918253
339616: RNCC: 3 | RNVC: 9
339616: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-592-9433
Body Hub

005929433
224-0175-208: RNCC: 3 | RNVC: 2
224-0175-208: RNCC: 3 | RNVC: 9
676-1747-208: RNCC: C | RNVC: 1

8 Jan 1975

3040-00-594-6175
Counterbalance Weight

005946175
132222-10: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-598-9805
Spur Gearshaft

005989805
105D3473: RNCC: 3 | RNVC: 2

16 Jan 1975

3040-00-598-9813
Spur Gearshaft

005989813
105D3438: RNCC: 3 | RNVC: 9

16 Jan 1975

3040-00-600-0900
Control Cam

006000900
1009366: RNCC: 3 | RNVC: 2
1009366: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-600-0902
Spur Gearshaft

006000902
1009397: RNCC: 3 | RNVC: 2
1009397: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-600-3860
Flexible Shaft Assembly Core

006003860
M10215-1F416: RNCC: 2 | RNVC: 2
MIL-DTL-10215: RNCC: 4 | RNVC: 1
1582108: RNCC: 5 | RNVC: 9
MS51072-16: RNCC: 5 | RNVC: 9
M10215-1B416: RNCC: 5 | RNVC: 9
418049-156: RNCC: 5 | RNVC: 9
MIL-DTL-10215K: RNCC: 5 | RNVC: 9
1582108: RNCC: 5 | RNVC: 9
7064524: RNCC: D | RNVC: 9

1 Jan 1963

3040-00-600-9726
Straight Shaft

006009726
542-3335-002: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-606-2717
Rigid Connecting Link

006062717
11610565: RNCC: 3 | RNVC: 2
3040006062717: RNCC: 6 | RNVC: 9

30 Jan 1975

3040-00-607-2814
Spur Gearshaft

006072814
132D1080: RNCC: 3 | RNVC: 2
13D1080: RNCC: 5 | RNVC: 9

30 Jan 1975

3040-00-608-4090
Spur Gearshaft

006084090
401717: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-609-0381
Mechanical Drive Housing

006090381
201095-5: RNCC: 3 | RNVC: 2
201095-5: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-610-7000
Straight Shaft

006107000
6787878: RNCC: 3 | RNVC: 2
6787878: RNCC: 5 | RNVC: 2
6787878: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-611-7557
Straight Shaft

006117557
26-2410: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-618-6234
Rigid Connecting Link

006186234
357801-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-621-1676
Brake Disc

006211676
36314-6: RNCC: 3 | RNVC: 2
36314-6: RNCC: 5 | RNVC: 2
36314-6: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-622-5868
Straight Shaft

006225868
384-1107-00: RNCC: 3 | RNVC: 2

1 Mar 1975

3040-00-625-8574
Rigid Connecting Link

006258574
374534-1: RNCC: 3 | RNVC: 2
374534-1: RNCC: 5 | RNVC: 2
374534-1: RNCC: 5 | RNVC: 2
374534-1: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-00-629-2178
Rigid Connecting Link

006292178
8741920: RNCC: 3 | RNVC: 2
8741900: RNCC: D | RNVC: 9

15 Mar 1975

3040-00-628-2635
Control Cam

006282635
125227-01: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-631-5136
Shouldered Shaft

006315136
507934: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-640-3985
Friction Lining

006403985
33667: RNCC: 3 | RNVC: 2
99133667: RNCC: 5 | RNVC: 2
EA181PC14: RNCC: 5 | RNVC: 9
A993PC63: RNCC: 5 | RNVC: 9
19662: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-649-8222
Shaft Collar

006498222
204-010-404-003: RNCC: 3 | RNVC: 2
204-010-404-3: RNCC: 5 | RNVC: 2
204-010-404-3: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-656-6155
Rigid Connecting Link

006566155
9-55623-1: RNCC: 3 | RNVC: 2
9-55623-5: RNCC: 3 | RNVC: 2
9-55623-3003: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-656-8955
Pawl

006568955
50-2671-6: RNCC: 3 | RNVC: 2
50-2671-8: RNCC: 5 | RNVC: 2
50-2671-2: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-671-3323
Rigid Connecting Link

006713323
53B22142: RNCC: 3 | RNVC: 2
53B22142: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-671-6325
Spur Gearshaft

006716325
555-6: RNCC: 3 | RNVC: 2
555-6: RNCC: 3 | RNVC: 9
555-6: RNCC: 5 | RNVC: 9
555-6: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-675-8392
Counterbalance Weight

006758392
132222-06: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-676-2868
Counterbalance Weight

006762868
377096CLD: RNCC: 3 | RNVC: 2
377096CLD: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-674-3690
Spur Gearshaft

006743690
20230-1: RNCC: 3 | RNVC: 9
20230-1: RNCC: 5 | RNVC: 2
20230-1: RNCC: C | RNVC: 1

1 Jan 1963

NSN 3040-00-679-8058 006798058 SHAFT,SHOULDERED

3040-00-679-8058
Shouldered Shaft

006798058
583294: RNCC: 3 | RNVC: 2
583294: RNCC: 5 | RNVC: 2
7320430: RNCC: 5 | RNVC: 2
583294: RNCC: 5 | RNVC: 9
2815006798058: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-690-2828
Manual Control Lever

006902828
7329014: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-691-1371
Shouldered Shaft

006911371
119360: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-690-2893
Spur Gearshaft

006902893
F-38491: RNCC: 3 | RNVC: 2
8738924: RNCC: 5 | RNVC: 9
8738924: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-690-2897
Spur Gearshaft

006902897
8738932: RNCC: 3 | RNVC: 2
8738932: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-704-8450
Control Cam

007048450
932238: RNCC: 3 | RNVC: 2
2600: RNCC: 5 | RNVC: 9
2600: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-708-1399
Hub Clamp

007081399
9886897P26: RNCC: 3 | RNVC: 2
9886897P26: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-710-2349
Rigid Connecting Link

007102349
2-40412-1: RNCC: 3 | RNVC: 2
2-40412-1: RNCC: 3 | RNVC: 9
2-40412-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-711-5726
Rigid Connecting Link

007115726
9-49047-1: RNCC: 3 | RNVC: 2
9-49047: RNCC: D | RNVC: 9

1 Jan 1963

3040-00-732-0801
Remote Control Lever

007320801
31884: RNCC: 3 | RNVC: 2
93-6237: RNCC: 3 | RNVC: 2
54B6237: RNCC: 5 | RNVC: 2
54B6237: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-735-7701
Spur Gearshaft

007357701
131D5022P01: RNCC: 3 | RNVC: 2
131D5022: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-716-1050
Manual Control Lever

007161050
7161050: RNCC: 3 | RNVC: 2
A10901: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-740-9539
Nonrotating Shaft Eye Bracket

007409539
100287R1: RNCC: 3 | RNVC: 2
7409539: RNCC: 5 | RNVC: 2
100287R1: RNCC: 5 | RNVC: 9
KC6710: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-753-9856
Straight Shaft

007539856
7539856: RNCC: 3 | RNVC: 2
2520007539856: RNCC: 5 | RNVC: 9
6764632: RNCC: 5 | RNVC: 9
6764632: RNCC: 5 | RNVC: 9
6764632: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-757-5191
Rigid Connecting Link

007575191
94411-7: RNCC: 3 | RNVC: 2

9 Jul 1971

3040-00-758-5037
Linear Actuating Cylinder Assembly

007585037
PDD1015-2: RNCC: 3 | RNVC: 2
6973-B-2: RNCC: 3 | RNVC: 9
6973-B-2: RNCC: 5 | RNVC: 2
PDD0758-2: RNCC: 5 | RNVC: 9
PDG0372-2: RNCC: 5 | RNVC: 9
PDD1015-2: RNCC: 5 | RNVC: 9
6973R: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-761-8028
Control Cam

007618028
588966-2: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-762-4508
Mechanical Drive Housing

007624508
8357184: RNCC: 3 | RNVC: 2
8357184: RNCC: 5 | RNVC: 2

20 Feb 1970

3040-00-770-5281
Shouldered Shaft

007705281
3-13443-1: RNCC: 3 | RNVC: 9
3-13443-1: RNCC: C | RNVC: 1

1 Jan 1962

3040-00-771-5092
Shouldered Shaft

007715092
1141-29: RNCC: 3 | RNVC: 2
1141-29: RNCC: 3 | RNVC: 9
1141B29: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-773-9380
Shouldered Shaft

007739380
8336571: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-774-8291
Governor Control Spring Link Assembly

007748291
VE428-1S1: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-780-5873
Spur Gearshaft

007805873
A02H6030-1: RNCC: 3 | RNVC: 2
A02H6030-1: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-780-6261
Shouldered Shaft

007806261
1117834-10: RNCC: 3 | RNVC: 2
1117834-10: RNCC: 5 | RNVC: 2
111734-10: RNCC: 5 | RNVC: 9
1117834-1: RNCC: 5 | RNVC: 9
1117834-10: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-781-8310
Remote Control Lever

007818310
8756761: RNCC: 3 | RNVC: 2
2520007818310: RNCC: 5 | RNVC: 9
5360007808243: RNCC: 5 | RNVC: 9
5360007818310: RNCC: 5 | RNVC: 9
2520007818310: RNCC: 6 | RNVC: 9
5360007818310: RNCC: 6 | RNVC: 9
5360007808243: RNCC: 6 | RNVC: 9

15 Jan 1968

3040-00-784-1390
Counterbalance Weight

007841390
359438CL6: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-785-2215
Control Cam

007852215
7132946-01: RNCC: 3 | RNVC: 2
7132946-01: RNCC: 5 | RNVC: 2
6-82056-1: RNCC: 5 | RNVC: 9
B7424-2E: RNCC: 5 | RNVC: 9
7132946: RNCC: D | RNVC: 9

1 Jan 1962

3040-00-786-3245
Linear Actuating Cylinder Piston

007863245
704894-2: RNCC: 3 | RNVC: 2
704894-2: RNCC: 5 | RNVC: 9

20 Mar 1968

3040-00-794-8248
Rigid Connecting Link

007948248
S6140-06134-012: RNCC: 3 | RNVC: 2
S6140-06134-012: RNCC: 5 | RNVC: 2
S6140-62157-12: RNCC: 5 | RNVC: 9
S6140-62134-12: RNCC: 5 | RNVC: 9
S6140-62134-12: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-793-1504
Rigid Connecting Link

007931504
29-8331-803: RNCC: 3 | RNVC: 2
29-8331-803: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-797-0231
Rigid Connecting Link

007970231
14711-512-4: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-797-7564
Helical Gearshaft

007977564
416-0501: RNCC: 3 | RNVC: 2
H2381PC1-2-6-19: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-801-6682
Shouldered Shaft

008016682
8351597: RNCC: 3 | RNVC: 2
3040008016682: RNCC: 6 | RNVC: 9

1 Jan 1962

3040-00-801-6653
Linear Actuating Cylinder Cap

008016653
8735766: RNCC: 3 | RNVC: 2
8735766: RNCC: 5 | RNVC: 2
8375766: RNCC: 5 | RNVC: 9
10258016653: RNCC: 6 | RNVC: 9
3040008016653: RNCC: 6 | RNVC: 9

1 Jan 1962

3040-00-808-9337
Manual Control Lever

008089337
H9-060: RNCC: 3 | RNVC: 2
11030918-1: RNCC: 5 | RNVC: 2
CB9-60-1: RNCC: 5 | RNVC: 2
B8011060: RNCC: 5 | RNVC: 2
B8011-060-1: RNCC: 5 | RNVC: 9
B8011-060: RNCC: 5 | RNVC: 9
3040PL0574545: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-806-6346
Quadrant Shaft

008066346
812300-1: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-810-3825
Air Inlet Shaft

008103825
5128593: RNCC: 3 | RNVC: 2

22 Mar 1968

3040-00-814-8409
Shaft Collar

008148409
040018: RNCC: 3 | RNVC: 2
1 1-4X2X11-16STEELC0LLAR: RNCC: 5 | RNVC: 9
02733: RNCC: C | RNVC: 1
SC125: RNCC: C | RNVC: 1
9444: RNCC: C | RNVC: 1
300223-453: RNCC: C | RNVC: 1
128: RNCC: C | RNVC: 1
8137729: RNCC: C | RNVC: 1

1 Jan 1962

3040-00-806-5496
Rigid Connecting Link

008065496
830413-1: RNCC: 3 | RNVC: 2
830413-1: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-821-4732
Valve Shaft

008214732
DYLZ595: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-824-1124
Control Cam

008241124
2612278: RNCC: 3 | RNVC: 2

11 Aug 1967

3040-00-829-5701
Ball Joint

008295701
150-1358: RNCC: 3 | RNVC: 2
150-998: RNCC: 5 | RNVC: 9
150A998: RNCC: 5 | RNVC: 9

1 Sep 1967

3040-00-837-1904
Counterbalance Weight

008371904
3005290CLA: RNCC: 3 | RNVC: 2

7 Dec 1966

3040-00-841-6068
Control Cam

008416068
58939: RNCC: 3 | RNVC: 2

21 Dec 1966

3040-00-468-4338
Straight Shaft

004684338
10934233: RNCC: 3 | RNVC: 2
10934233: RNCC: 5 | RNVC: 2

19 Aug 1970

3040-00-474-4736
Rigid Connecting Link

004744736
909622-8: RNCC: 3 | RNVC: 2
103196: RNCC: 3 | RNVC: 2
103196: RNCC: 5 | RNVC: 2
103196: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-477-5679
Shouldered Shaft

004775679
K415-000455: RNCC: 3 | RNVC: 2
K415-000455: RNCC: 5 | RNVC: 9

12 Jun 1974

3040-00-480-8592
Linear Actuating Cylinder Piston

004808592
215667: RNCC: 3 | RNVC: 2
215667: RNCC: 5 | RNVC: 1
215667: RNCC: 5 | RNVC: 9

11 Mar 1972

3040-00-484-3561
Ball Joint

004843561
A038491: RNCC: 3 | RNVC: 2
624VLF00463: RNCC: 5 | RNVC: 9
4475023 ITEM 261: RNCC: 5 | RNVC: 9
6503-86 PIECE 261: RNCC: 5 | RNVC: 9
5A-038491: RNCC: 5 | RNVC: 9
A38491: RNCC: 5 | RNVC: 9
303001220: RNCC: 5 | RNVC: 9
4475023: RNCC: D | RNVC: 9
6503-86: RNCC: D | RNVC: 9

23 May 1969

3040-00-507-9977
Flexible Shaft Assembly Core

005079977
M10215-1F414: RNCC: 2 | RNVC: 2
MIL-DTL-10215: RNCC: 4 | RNVC: 1
7984852: RNCC: 5 | RNVC: 1
MS51072-14: RNCC: 5 | RNVC: 9
M10215-1F414: RNCC: 5 | RNVC: 9
MIL-S-10215: RNCC: 5 | RNVC: 9
418049-107.5: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-509-9269
Shouldered Shaft

005099269
507758: RNCC: 3 | RNVC: 2
507758: RNCC: 3 | RNVC: 9

1 Jan 1963

3040-00-517-3182
Manual Control Lever

005173182
5173182: RNCC: 3 | RNVC: 2
XX002-1636: RNCC: 5 | RNVC: 2
1015005173182: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-536-1505
Upper Brake

005361505
22301718: RNCC: 3 | RNVC: 9

12 Aug 1989

3040-00-536-3558
Bell Crank Support

005363558
3314814-1: RNCC: 3 | RNVC: 2
354571-1L: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-713-0397
Straight Shaft

007130397
120423-012: RNCC: 3 | RNVC: 2
A3-23: RNCC: 3 | RNVC: 2
2616179-1: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-714-7050
Rigid Connecting Link

007147050
915-151.42: RNCC: 3 | RNVC: 2
915-151.42: RNCC: 3 | RNVC: 9
A915-151-42: RNCC: 5 | RNVC: 9
B915-151-42: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-707-9778
Shouldered Shaft

007079778
544011: RNCC: 3 | RNVC: 2
544011: RNCC: 5 | RNVC: 9
544011: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-740-9408
Remote Control Lever

007409408
7409408: RNCC: 3 | RNVC: 2
KC6711: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-832-3216
Shaft Assembly

008323216
6503044: RNCC: 3 | RNVC: 9
6503044: RNCC: 5 | RNVC: 9
6503044: RNCC: 5 | RNVC: 9
6503044: RNCC: 5 | RNVC: 9
6503044: RNCC: 5 | RNVC: 9
6503044: RNCC: C | RNVC: 1

1 Jan 1962

3040-00-670-9284
Linear Actuating Cylinder

006709284
56D23339-3: RNCC: 3 | RNVC: 9
56D23339-3: RNCC: 5 | RNVC: 2
56D23339-3: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-671-3289
Rigid Connecting Link

006713289
44A9858: RNCC: 3 | RNVC: 9
44A9858: RNCC: 5 | RNVC: 2
44A9858: RNCC: 5 | RNVC: 2
3840006713289: RNCC: 5 | RNVC: 9
44A9858: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-671-1958
Worm Wheel Gearshaft

006711958
129627-01: RNCC: 3 | RNVC: 2
129627-01: RNCC: 5 | RNVC: 9
129627-01: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-706-5891
Shouldered Shaft

007065891
7065891: RNCC: 3 | RNVC: 2
417250: RNCC: 3 | RNVC: 9
917250: RNCC: 5 | RNVC: 9
506N1: RNCC: 5 | RNVC: 9
KC6678: RNCC: 5 | RNVC: 9
417250: RNCC: 5 | RNVC: 9
2520007065891: RNCC: 5 | RNVC: 9
7065891: RNCC: 5 | RNVC: 9
913321: RNCC: 5 | RNVC: 9
2520007065891: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-709-8628
Grease Cap

007098628
204-040-629-5: RNCC: 3 | RNVC: 2
204-040-629-005: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-692-4911
Body Hub

006924911
7709871: RNCC: 3 | RNVC: 2
3040006924911: RNCC: 5 | RNVC: 9
62.11.023: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-692-9239
Straight Shaft

006929239
7709234: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-450-0495
Bell Crank

004500495
5132747: RNCC: 3 | RNVC: 2
K5132747: RNCC: 5 | RNVC: 9
PC5132747: RNCC: 5 | RNVC: 9

7 May 1971

Load More Results