What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 131 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 131 of 300

3040-01-108-1238
Straight Shaft

011081238
RE-B102130: RNCC: 3 | RNVC: 2
ASC1538974: RNCC: 5 | RNVC: 9

21 Feb 1981

3040-01-107-9589
Spur Gearshaft

011079589
23510825: RNCC: 3 | RNVC: 2
23510825: RNCC: 3 | RNVC: 9
23510815: RNCC: 5 | RNVC: 9

18 Feb 1981

3040-01-108-2657
Shouldered Shaft

011082657
176C1665: RNCC: 3 | RNVC: 2

24 Feb 1981

3040-01-108-7031
Shouldered Shaft

011087031
01-435-0157-5 PIECE 211: RNCC: 3 | RNVC: 2
60-305-0004-2: RNCC: 5 | RNVC: 2
60305-0004 PIECE 211: RNCC: 5 | RNVC: 2
01-435-0157-5 PIECE 211: RNCC: 5 | RNVC: 9
60-305-0004-2: RNCC: 5 | RNVC: 9

4 Mar 1981

3040-01-108-5340
Pawl

011085340
12299105: RNCC: 3 | RNVC: 2
12299105: RNCC: 5 | RNVC: 2
10085840: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-109-9123
Straight Shaft

011099123
12293427: RNCC: 3 | RNVC: 2
12293427: RNCC: 5 | RNVC: 1
12293427: RNCC: 5 | RNVC: 1
12293427: RNCC: 5 | RNVC: 9

24 Mar 1981

3040-01-110-4403
Shouldered Shaft

011104403
12292338: RNCC: 3 | RNVC: 2

31 Mar 1981

3040-01-112-1092
Push-Pull Control Assembly

011121092
1J3304: RNCC: 3 | RNVC: 2
876-609-3-108: RNCC: 5 | RNVC: 2
4058-075-0275 AND 3006000-001: RNCC: 5 | RNVC: 2
D301846-3-108: RNCC: 5 | RNVC: 9
D301846-3-108: RNCC: 5 | RNVC: 9
876-609-3-108: RNCC: 5 | RNVC: 9
57-3346-2171: RNCC: 5 | RNVC: 9
1J3304-A: RNCC: D | RNVC: 9

26 Apr 1981

3040-01-109-4776
Rigid Connecting Link

011094776
12292425: RNCC: 3 | RNVC: 2

15 Mar 1981

3040-01-113-7560
Rigid Connecting Link

011137560
2600645: RNCC: 3 | RNVC: 2

3 Jun 1981

3040-01-111-1188
Differential Spider

011111188
2862608: RNCC: 3 | RNVC: 2

11 Apr 1981

3040-01-114-4600
Control Cam

011144600
2640-809X24 ITEM 27: RNCC: 3 | RNVC: 2
845-4687577 ITEM 38: RNCC: 5 | RNVC: 2
2640-809-24 ITE: RNCC: C | RNVC: 1
845-4687577: RNCC: D | RNVC: 9
2640-809X24: RNCC: D | RNVC: 9

17 Jun 1981

3040-01-114-7725
Straight Shaft

011147725
12299205: RNCC: 3 | RNVC: 2
10085857: RNCC: 6 | RNVC: 9

22 Jun 1981

3040-01-114-8584
Breather

011148584
3862075-1: RNCC: 3 | RNVC: 2
10159283: RNCC: 6 | RNVC: 9

24 Jun 1981

3040-01-114-4296
External Shaft

011144296
61417: RNCC: 3 | RNVC: 2

17 Jun 1981

3040-01-114-8426
Rotating Shaft Eye Bracket

011148426
641-3549-001: RNCC: 3 | RNVC: 2
641-3549-001: RNCC: 5 | RNVC: 2
10106761: RNCC: 6 | RNVC: 9

24 Jun 1981

3040-01-115-3491
Head Clamp

011153491
2642-693-02 ITEM 13: RNCC: 3 | RNVC: 2
845-4687549 ITEM 13: RNCC: 5 | RNVC: 2
2642-693-02 ITEM 13: RNCC: 5 | RNVC: 9
2642-693-02: RNCC: D | RNVC: 9
845-4687549: RNCC: D | RNVC: 9

3 Jul 1981

3040-01-116-1309
Straight Shaft

011161309
176C1473: RNCC: 3 | RNVC: 2
10106769: RNCC: 6 | RNVC: 9

21 Jul 1981

3040-01-116-1457
Shouldered Shaft

011161457
167C2171: RNCC: 3 | RNVC: 2
10106772: RNCC: 6 | RNVC: 9

21 Jul 1981

3040-01-117-6899
Counterbalance Weight

011176899
3556943-6: RNCC: 3 | RNVC: 2

20 Aug 1981

3040-01-118-7578
Bevel Gearshaft

011187578
384754: RNCC: 3 | RNVC: 2

11 Sep 1981

3040-01-119-0606
Shouldered Shaft

011190606
3167427-2: RNCC: 3 | RNVC: 2
3167427-2: RNCC: 5 | RNVC: 9
10106787: RNCC: 6 | RNVC: 9
3167427: RNCC: D | RNVC: 9

16 Sep 1981

3040-01-119-7407
Rigid Connecting Link

011197407
145H7327-1: RNCC: 3 | RNVC: 2

2 Oct 1981

3040-01-120-5487
Shouldered Shaft

011205487
603226-62-A: RNCC: 3 | RNVC: 2
603226-62-A: RNCC: 3 | RNVC: 9

21 Oct 1981

3040-01-121-4912
Rigid Connecting Link

011214912
14-50759-7: RNCC: 3 | RNVC: 2
14-50759-7: RNCC: 3 | RNVC: 9
14-50759-7: RNCC: 5 | RNVC: 9
1652-3: RNCC: 5 | RNVC: 9
14-50759-7: RNCC: 5 | RNVC: 9

5 Nov 1981

3040-01-121-9698
Gearshaft

011219698
147582-1: RNCC: 3 | RNVC: 2
147582-1: RNCC: 5 | RNVC: 2
147582-1: RNCC: 5 | RNVC: 9

11 Nov 1981

3040-01-122-3401
Manual Control Lever

011223401
20476-421: RNCC: 3 | RNVC: 2
20476-420: RNCC: 5 | RNVC: 2
20481-002 FIND 17: RNCC: 5 | RNVC: 9
20481-002: RNCC: D | RNVC: 9

19 Nov 1981

3040-01-123-0981
Shouldered Shaft

011230981
112887-1: RNCC: 3 | RNVC: 2
112887-1: RNCC: 5 | RNVC: 9

5 Dec 1981

3040-01-123-2228
Counterbalance Weight

011232228
579-1047-02: RNCC: 3 | RNVC: 2
10163650: RNCC: 6 | RNVC: 9

8 Dec 1981

3040-01-123-6234
Shaft Collar

011236234
13218E4060: RNCC: 3 | RNVC: 2

16 Dec 1981

3040-01-124-0338
Shaft Retaining Plate

011240338
2585719: RNCC: 3 | RNVC: 2
2585719: RNCC: 5 | RNVC: 2
2585719: RNCC: 5 | RNVC: 2

27 Dec 1981

3040-01-124-6531
Straight Shaft

011246531
70400-02155-103: RNCC: 3 | RNVC: 2
70400-02155-102: RNCC: E | RNVC: 8

9 Jan 1982

3040-01-125-2903
Brake Pulleys Shaft

011252903
74A640009-2004: RNCC: 3 | RNVC: 2
74A640009-2004: RNCC: 5 | RNVC: 2

25 Jan 1982

3040-01-125-3018
Control Cam

011253018
74A350741-2002: RNCC: 3 | RNVC: 2
10106811: RNCC: 6 | RNVC: 9

25 Jan 1982

3040-01-125-7329
Spur Gearshaft

011257329
65391-11709-104: RNCC: 3 | RNVC: 2
65391-11709-102: RNCC: 5 | RNVC: 9
65391-11709-103: RNCC: 5 | RNVC: 9

1 Feb 1982

3040-01-125-8012
Control Cam

011258012
7605-0037-01: RNCC: 3 | RNVC: 2
10106816: RNCC: 6 | RNVC: 9

1 Feb 1982

3040-01-125-8211
Rigid Connecting Link

011258211
6513-9: RNCC: 3 | RNVC: 2
10106820: RNCC: 6 | RNVC: 9

1 Feb 1982

3040-01-125-8364
Shouldered Shaft

011258364
64361-04008-101: RNCC: 3 | RNVC: 2

1 Feb 1982

3040-01-126-1595
Rigid Connecting Link

011261595
167C2196: RNCC: 3 | RNVC: 2
10106832: RNCC: 6 | RNVC: 9

6 Feb 1982

3040-01-128-1516
Rigid Connecting Link

011281516
74A640018-1001: RNCC: 3 | RNVC: 2
10106835: RNCC: 6 | RNVC: 9
74A640018: RNCC: D | RNVC: 9

18 Mar 1982

3040-01-127-4757
Spur Gearshaft

011274757
27683: RNCC: 3 | RNVC: 2

2 Mar 1982

3040-01-128-4412
Spline Adapter

011284412
1594557-1: RNCC: 3 | RNVC: 2
93-31300-02: RNCC: 5 | RNVC: 2
1584000-1: RNCC: 5 | RNVC: 9
1584000-1: RNCC: 5 | RNVC: 9
1594557-1: RNCC: 5 | RNVC: 9

21 Mar 1982

3040-01-128-4668
Spur Gearshaft

011284668
2040923-1: RNCC: 3 | RNVC: 2
2040923-1: RNCC: 5 | RNVC: 9
10106846: RNCC: 6 | RNVC: 9
2040923: RNCC: D | RNVC: 9

21 Mar 1982

3040-01-128-5716
Mechanical Drive Housing

011285716
12288133: RNCC: 3 | RNVC: 2

25 Mar 1982

3040-01-129-5819
Shaft

011295819
5N1883: RNCC: 3 | RNVC: 2
5L1650: RNCC: 5 | RNVC: 9

8 Apr 1982

3040-01-090-0616
Rigid Connecting Link

010900616
3529-5: RNCC: 3 | RNVC: 2
160C611501-5: RNCC: 7 | RNVC: 9
160C611501-5: RNCC: C | RNVC: 1

11 Feb 1980

3040-01-112-4919
Pawl

011124919
503951: RNCC: 3 | RNVC: 2
503951: RNCC: 5 | RNVC: 9

6 May 1981

3040-01-110-5031
Brake Disc

011105031
3706-2: RNCC: 3 | RNVC: 2
3706-2: RNCC: 5 | RNVC: 2

2 Apr 1981

3040-01-113-3783
Mechanical Drive Housing

011133783
12292402: RNCC: 3 | RNVC: 2

21 May 1981

3040-01-111-0159
Shouldered Shaft

011110159
3164038-2: RNCC: 3 | RNVC: 2
3164038-2: RNCC: 5 | RNVC: 9

9 Apr 1981

3040-01-113-9901
Extension Shaft

011139901
384-1099-00: RNCC: 3 | RNVC: 2
384-1099-00: RNCC: 3 | RNVC: 9

7 Jun 1981

3040-01-125-8927
Rigid Connecting Link

011258927
MBEU-65528: RNCC: 3 | RNVC: 2

1 Feb 1982

3040-01-125-9922
Rigid Connecting Link

011259922
XA-39: RNCC: 3 | RNVC: 2
XA-39: RNCC: 5 | RNVC: 2
2AH747: RNCC: 5 | RNVC: 2
MA207-23111: RNCC: 5 | RNVC: 2
XA-39: RNCC: 5 | RNVC: 2
2AH747: RNCC: 5 | RNVC: 9
39: RNCC: 5 | RNVC: 9

5 Feb 1982

3040-01-059-6877
Square Drve Adapter

010596877
16A2300-21: RNCC: 3 | RNVC: 2
16A2300-21: RNCC: 5 | RNVC: 9

15 Apr 1978

3040-01-059-6483
Uplock Shaft

010596483
162D637071-2001: RNCC: 3 | RNVC: 2
162D637071-2001: RNCC: 5 | RNVC: 2
160D637071-11: RNCC: 5 | RNVC: 9
160D637071-11: RNCC: C | RNVC: 1

14 Apr 1978

3040-01-060-0086
Flexible Casing Coupling Nut

010600086
757578-2: RNCC: 3 | RNVC: 2
T15-125A: RNCC: 5 | RNVC: 2
T15-125AZ: RNCC: 5 | RNVC: 9

4 May 1978

3040-01-060-6951
Body Hub

010606951
2009090-1: RNCC: 3 | RNVC: 2

27 May 1978

3040-01-060-8876
Rigid Connecting Link

010608876
4050494: RNCC: 3 | RNVC: 2
4050494: RNCC: 3 | RNVC: 9
4050494: RNCC: 5 | RNVC: 2
4050494: RNCC: 5 | RNVC: 2
4050494: RNCC: 5 | RNVC: 9
4050494: RNCC: 5 | RNVC: 9
3040PL0665956: RNCC: 6 | RNVC: 9

4 Jun 1978

3040-01-065-4952
Bevel Gearshaft

010654952
69-4194: RNCC: 3 | RNVC: 2
69-4194: RNCC: 5 | RNVC: 9

20 Sep 1978

3040-01-067-8143
Piston Assembly

010678143
A2V2: RNCC: 3 | RNVC: 2
S4824-3237185PC37: RNCC: 5 | RNVC: 2
29737PC37: RNCC: 5 | RNVC: 2
29737PC37: RNCC: 5 | RNVC: 9
S4824-3237185: RNCC: D | RNVC: 9
29737: RNCC: D | RNVC: 9

8 Nov 1978

3040-01-068-2863
Speedometer-Tachometer Drive Adapter

010682863
A34266: RNCC: 3 | RNVC: 2

19 Nov 1978

3040-01-068-7647
Brake Plate

010687647
54725: RNCC: 3 | RNVC: 2
72180: RNCC: 3 | RNVC: 2
S113937: RNCC: 5 | RNVC: 9
50461: RNCC: 5 | RNVC: 9
S93711: RNCC: 5 | RNVC: 9
72180: RNCC: 5 | RNVC: 9
50461: RNCC: C | RNVC: 1

1 Dec 1978

3040-01-069-9351
Ball Joint

010699351
1582: RNCC: 3 | RNVC: 2

29 Dec 1978

3040-01-070-7369
Rigid Connecting Link

010707369
16K0571-845: RNCC: 3 | RNVC: 2
16K0571-845: RNCC: 5 | RNVC: 2
3040PL0666019: RNCC: 6 | RNVC: 9

18 Jan 1979

3040-01-071-8282
Cylinder Actuating Linear Guide

010718282
709-4684897 ITEM 8: RNCC: 3 | RNVC: 2
87832-1626PC8: RNCC: 5 | RNVC: 2
87832-1626-8: RNCC: 5 | RNVC: 9
709-4684897: RNCC: D | RNVC: 9
87832-1626: RNCC: D | RNVC: 9

15 Feb 1979

3040-01-073-1185
Shouldered Shaft

010731185
11579108: RNCC: 3 | RNVC: 2

9 Mar 1979

3040-01-073-9719
Control Cam

010739719
12285494: RNCC: 3 | RNVC: 2

24 Mar 1979

3040-01-074-8346
Shouldered Shaft

010748346
12288041: RNCC: 3 | RNVC: 2
DAX12651: RNCC: 5 | RNVC: 2
12267438: RNCC: 5 | RNVC: 9

8 Apr 1979

3040-01-074-7721
Counterbalance Weight

010747721
387384CL8: RNCC: 3 | RNVC: 2

6 Apr 1979

3040-01-074-9987
Rigid Connecting Link

010749987
212-001-052-101: RNCC: 3 | RNVC: 2
212-001-052-101: RNCC: 5 | RNVC: 2
212-001-052: RNCC: D | RNVC: 9

11 Apr 1979

3040-01-076-6906
Linear Actuating Cylinder Piston

010766906
12283219: RNCC: 3 | RNVC: 2

9 May 1979

3040-01-077-6087
Spur Gearshaft

010776087
1854981: RNCC: 3 | RNVC: 2

26 May 1979

3040-01-078-3694
Bevel Gearshaft

010783694
6793016: RNCC: 3 | RNVC: 2
650AS174-14: RNCC: 5 | RNVC: 2
6793016: RNCC: 5 | RNVC: 9
650AS174: RNCC: D | RNVC: 9

11 Jun 1979

3040-01-079-1292
Rigid Connecting Link

010791292
2-23-13321: RNCC: 3 | RNVC: 2
10168200235: RNCC: 5 | RNVC: 2

27 Jun 1979

3040-01-078-9180
Rigid Connecting Link

010789180
68B618000-293: RNCC: 3 | RNVC: 2
4500-293: RNCC: 3 | RNVC: 2

21 Jun 1979

3040-01-081-5252
Linear Actuating Cylinder Assembly

010815252
G101274: RNCC: 3 | RNVC: 2
C3238: RNCC: 3 | RNVC: 2

15 Aug 1979

3040-01-083-0511
Shouldered Shaft

010830511
1587269-2: RNCC: 3 | RNVC: 2
1587269-2: RNCC: 5 | RNVC: 9
1587269-2: RNCC: C | RNVC: 1

14 Sep 1979

3040-01-083-5414
Mechanical Drive Housing

010835414
10920689: RNCC: 3 | RNVC: 2

26 Sep 1979

3040-01-084-2807
Linear Actuating Cylinder Head

010842807
4685194A-0017: RNCC: 3 | RNVC: 2
704-4685193 ITEM 18: RNCC: 5 | RNVC: 2
87861-1507PC17: RNCC: 5 | RNVC: 9
4685194-0017: RNCC: 5 | RNVC: 9
704-4685193: RNCC: D | RNVC: 9

14 Oct 1979

3040-01-085-5178
Bell Crank

010855178
70400-02502-044: RNCC: 3 | RNVC: 2
70400-02502-044: RNCC: 5 | RNVC: 2
70400-02502: RNCC: D | RNVC: 9

9 Nov 1979

3040-01-086-0817
Remote Control Lever

010860817
70400-01614-044: RNCC: 3 | RNVC: 2
3040PL1940158: RNCC: 6 | RNVC: 9
70400-01614: RNCC: D | RNVC: 9

20 Nov 1979

3040-01-087-4405
Rigid Connecting Link

010874405
70400-01609-046: RNCC: 3 | RNVC: 2
70400-01609-046: RNCC: 5 | RNVC: 2
70400-01609-046: RNCC: 5 | RNVC: 2

17 Dec 1979

3040-01-088-1925
Shouldered Shaft

010881925
421339: RNCC: 3 | RNVC: 2

8 Jan 1980

3040-01-088-5903
Rigid Connecting Link

010885903
11684303: RNCC: 3 | RNVC: 2

16 Jan 1980

3040-01-089-7790
Shouldered Shaft

010897790
12524303: RNCC: 3 | RNVC: 2
465-4303: RNCC: 5 | RNVC: 2
2 0040-089: RNCC: 5 | RNVC: 2
2 0040-089: RNCC: 5 | RNVC: 9
465-4303: RNCC: 5 | RNVC: 9
10126871: RNCC: 6 | RNVC: 9
3040PL1037715: RNCC: 6 | RNVC: 9
465-4303: RNCC: C | RNVC: 1

7 Feb 1980

3040-01-091-3841
Rigid Connecting Link

010913841
70400-02252-120: RNCC: 3 | RNVC: 2
SR11719A: RNCC: 3 | RNVC: 9
2005-1: RNCC: 5 | RNVC: 2
1100070-120: RNCC: 5 | RNVC: 9
2005-Y120: RNCC: 5 | RNVC: 9
70400-02252-120: RNCC: 5 | RNVC: 9
70400-02252-120: RNCC: 5 | RNVC: 9
70400-02252-120: RNCC: 5 | RNVC: 9
70400-02252-120: RNCC: 5 | RNVC: 9
SR11719A: RNCC: 5 | RNVC: 9

7 Mar 1980

3040-01-092-4401
Valve Shaft

010924401
9183: RNCC: 3 | RNVC: 9
6304-14-2 ITEM 4: RNCC: 5 | RNVC: 9
9183: RNCC: C | RNVC: 1
6304-14-2 ITEM 4: RNCC: C | RNVC: 1

26 Mar 1980

3040-01-093-6486
Manual Control Lever

010936486
19-97-0151: RNCC: 3 | RNVC: 2
845-4558738 ITEM 65: RNCC: 5 | RNVC: 2
2641-809-40 ASSEMBLY B: RNCC: 5 | RNVC: 2
845-4558738: RNCC: D | RNVC: 9

20 Apr 1980

3040-01-093-8922
Shaft Collar

010938922
11727834: RNCC: 3 | RNVC: 2

26 Apr 1980

3040-01-094-6154
Straight Shaft

010946154
1231-196-1: RNCC: 3 | RNVC: 2
1231-196-1: RNCC: C | RNVC: 1

13 May 1980

3040-01-094-8456
Shouldered Shaft

010948456
737913-2: RNCC: 3 | RNVC: 2

17 May 1980

3040-01-095-2312
Shouldered Shaft

010952312
12292463: RNCC: 3 | RNVC: 2

25 May 1980

3040-01-095-2969
Rigid Connecting Link

010952969
3003T57P01: RNCC: 3 | RNVC: 2

28 May 1980

3040-01-095-6074
Push-Pull Control Assembly

010956074
5211-1: RNCC: 3 | RNVC: 2
9D7928: RNCC: 3 | RNVC: 2
5211-1: RNCC: 5 | RNVC: 2

4 Jun 1980

3040-01-095-7541
Shouldered Shaft

010957541
70105-08003-103: RNCC: 3 | RNVC: 2
70150-08003-102: RNCC: 5 | RNVC: 9

5 Jun 1980

3040-01-097-6145
Shaft Stop

010976145
621-2506-001: RNCC: 3 | RNVC: 2

16 Jul 1980

3040-01-098-1862
Push-Pull Control Assembly

010981862
990-06-537: RNCC: 3 | RNVC: 2
10252754-4: RNCC: 3 | RNVC: 2
10252754: RNCC: D | RNVC: 9

26 Jul 1980

3040-01-098-3050
Shouldered Shaft

010983050
621-2493-001: RNCC: 3 | RNVC: 2
621-2493: RNCC: D | RNVC: 9

30 Jul 1980

3040-01-098-8349
Shouldered Shaft

010988349
43706: RNCC: 3 | RNVC: 2

8 Aug 1980

3040-01-100-3017
Rigid Connecting Link

011003017
65652-11227-082: RNCC: 3 | RNVC: 2
65652-11227-082: RNCC: 5 | RNVC: 2
65652-11227-082: RNCC: 5 | RNVC: 9

1 Sep 1980

3040-01-099-9335
Nonrotating Shaft Eye Bracket

010999335
16102088: RNCC: 3 | RNVC: 2
16102088: RNCC: 3 | RNVC: 9
16403147 ITEM 42: RNCC: 5 | RNVC: 9

27 Aug 1980

3040-01-101-9501
Extension Shaft

011019501
071695-0001: RNCC: 3 | RNVC: 2
071695: RNCC: D | RNVC: 9

9 Oct 1980

3040-01-102-3563
Remote Control Lever

011023563
12284999-3: RNCC: 3 | RNVC: 2

18 Oct 1980

3040-01-103-1050
Rigid Connecting Link

011031050
948646-101: RNCC: 3 | RNVC: 2
948646-101A: RNCC: 5 | RNVC: 9

9 Nov 1980

3040-01-103-8062
Shouldered Shaft

011038062
2642-343-03 ITEM 8: RNCC: 3 | RNVC: 2
88-D-329: RNCC: 5 | RNVC: 2
845-4558718 ITEM 8: RNCC: 5 | RNVC: 9
845-4558718: RNCC: D | RNVC: 9
2642-343-03: RNCC: D | RNVC: 9

20 Nov 1980

3040-01-106-0833
Breather

011060833
BV-2: RNCC: 3 | RNVC: 2
BV2-1/4IN: RNCC: C | RNVC: 1

11 Jan 1981

3040-01-105-6597
Remote Control Lever

011056597
12298320: RNCC: 3 | RNVC: 2

1 Jan 1981

3040-01-106-7812
Nonrotating Shaft Eye Bracket

011067812
12293100-2: RNCC: 3 | RNVC: 2
12293100: RNCC: D | RNVC: 9

25 Jan 1981

3040-01-107-2154
Nonvehicular Propeller Shaft

011072154
117-62NYSM-28-9: RNCC: 3 | RNVC: 2
L33739: RNCC: 5 | RNVC: 9
62NYSM28-9: RNCC: 5 | RNVC: 9

31 Jan 1981

3040-01-107-3837
Spur Gearshaft

011073837
142D5485: RNCC: 3 | RNVC: 2

4 Feb 1981

3040-01-107-9198
Ball Joint

011079198
TF-4Y: RNCC: 3 | RNVC: 2
CW-4S: RNCC: 3 | RNVC: 2
402908: RNCC: 3 | RNVC: 2
402908: RNCC: 5 | RNVC: 2
TF-4Y: RNCC: 5 | RNVC: 9

15 Feb 1981

3040-01-108-2162
Rigid Connecting Link

011082162
65400-00111-087: RNCC: 3 | RNVC: 2

23 Feb 1981

3040-01-108-3553
Shouldered Shaft

011083553
5910-383: RNCC: 3 | RNVC: 2

26 Feb 1981

3040-01-108-5338
Remote Control Lever

011085338
12299106: RNCC: 3 | RNVC: 2
12299106: RNCC: 5 | RNVC: 2
10085838: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-108-9558
Linear Actuating Cylinder

011089558
4710.721.4.1: RNCC: 3 | RNVC: 2
4710.721.4C1: RNCC: 5 | RNVC: 2
0501-6 PIECE 13: RNCC: 5 | RNVC: 2

8 Mar 1981

3040-01-108-5348
Shouldered Shaft

011085348
12299388: RNCC: 3 | RNVC: 2
1229388: RNCC: 5 | RNVC: 9
10085846: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-109-4588
Shouldered Shaft

011094588
11629360: RNCC: 3 | RNVC: 2
10388408: RNCC: 6 | RNVC: 9

15 Mar 1981

3040-01-109-7326
Link

011097326
549AS151: RNCC: 3 | RNVC: 2
549AS151: RNCC: 5 | RNVC: 2
549AS151: RNCC: 5 | RNVC: 2
549AS151: RNCC: 5 | RNVC: 2
549AS151: RNCC: 5 | RNVC: 2

20 Mar 1981

3040-01-110-1209
Shouldered Shaft

011101209
305416000: RNCC: 3 | RNVC: 2
01-110-1209: RNCC: 5 | RNVC: 2
53-102: RNCC: 5 | RNVC: 2
196967: RNCC: 5 | RNVC: 9
3054160: RNCC: 5 | RNVC: 9
GPA-0019: RNCC: 5 | RNVC: 9

26 Mar 1981

3040-01-109-6869
Flexible Drive Shaft

011096869
12288442: RNCC: 3 | RNVC: 2
304001096869: RNCC: 6 | RNVC: 9

19 Mar 1981

3040-01-110-4311
Remote Control Lever

011104311
12297023-1: RNCC: 3 | RNVC: 2

31 Mar 1981

3040-01-110-4312
Remote Control Lever

011104312
12296738: RNCC: 3 | RNVC: 2

31 Mar 1981

3040-01-110-4662
Rigid Connecting Link

011104662
12299091: RNCC: 3 | RNVC: 2
10085851: RNCC: 6 | RNVC: 9

1 Apr 1981

3040-01-109-6646
Flexible Shaft Assembly

011096646
SM-C-807622: RNCC: 3 | RNVC: 2
330622-1: RNCC: 5 | RNVC: 2

19 Mar 1981

3040-01-109-6363
Shaft Retaining Plate

011096363
28923: RNCC: 3 | RNVC: 2
895-28365 ITEM 11: RNCC: 5 | RNVC: 2
895-28365: RNCC: D | RNVC: 9

19 Mar 1981

3040-01-111-0971
Rigid Connecting Link

011110971
3365693-1: RNCC: 3 | RNVC: 2
3365693-1: RNCC: 5 | RNVC: 2
3365693-1: RNCC: 5 | RNVC: 2
3365693: RNCC: D | RNVC: 9

10 Apr 1981

3040-01-112-1665
Rigid Connecting Link

011121665
12295646: RNCC: 3 | RNVC: 2

28 Apr 1981

3040-01-113-2517
Flexible Drive Shaft

011132517
5101294: RNCC: 3 | RNVC: 2
5145552: RNCC: 5 | RNVC: 9
5145551: RNCC: C | RNVC: 1

19 May 1981

3040-01-114-6670
Control Cam

011146670
845-4687577 ITEM 39: RNCC: 3 | RNVC: 2
264080924A-0026: RNCC: 5 | RNVC: 2
2640-809X24 ITEM 26: RNCC: 5 | RNVC: 9
845-4687577: RNCC: D | RNVC: 9
2640-809X24: RNCC: D | RNVC: 9

20 Jun 1981

3040-01-114-7719
Rigid Connecting Link

011147719
12300436: RNCC: 3 | RNVC: 2
10085854: RNCC: 6 | RNVC: 9

22 Jun 1981

3040-01-114-6859
Friction Lining

011146859
504412: RNCC: 3 | RNVC: 2
504412: RNCC: 5 | RNVC: 9

21 Jun 1981

3040-01-115-0642
Shaft Retaining Plate

011150642
569479: RNCC: 3 | RNVC: 2

27 Jun 1981

3040-01-114-9458
Spur Gearshaft

011149458
35-79501-3010-4: RNCC: 3 | RNVC: 2

25 Jun 1981

3040-01-115-8279
Shouldered Shaft

011158279
3882319-2: RNCC: 3 | RNVC: 2
3882319: RNCC: D | RNVC: 9

15 Jul 1981

3040-01-115-9596
Rigid Connecting Link

011159596
70400-01250-054: RNCC: 3 | RNVC: 2
2024-1: RNCC: 5 | RNVC: 9
1100040-054: RNCC: 5 | RNVC: 9
70400-01250-054: RNCC: 5 | RNVC: 9
70400-01250-054: RNCC: 5 | RNVC: 9
SR10987A: RNCC: 5 | RNVC: 9
3040PL1939422: RNCC: 6 | RNVC: 9
70400-01250-044: RNCC: E | RNVC: 8

17 Jul 1981

3040-01-117-1080
Bell Crank

011171080
145C3317-3: RNCC: 3 | RNVC: 2

9 Aug 1981

3040-01-117-1391
Manual Control Lever

011171391
4570519: RNCC: 3 | RNVC: 2
4570519: RNCC: 5 | RNVC: 2

9 Aug 1981

3040-01-117-1357
Remote Control Lever

011171357
145H7326-4: RNCC: 3 | RNVC: 2
145H7326-4: RNCC: 5 | RNVC: 2

9 Aug 1981

3040-01-117-4119
Rigid Connecting Link

011174119
145C3126-1: RNCC: 3 | RNVC: 2
145C3126-1: RNCC: 5 | RNVC: 2

14 Aug 1981

3040-01-117-5566
Control Cam

011175566
3037-584: RNCC: 3 | RNVC: 2

16 Aug 1981

3040-01-117-6898
Counterbalance Weight

011176898
3556943-5: RNCC: 3 | RNVC: 2
3556943-5: RNCC: C | RNVC: 1

20 Aug 1981

3040-01-117-7357
Rigid Connecting Link

011177357
145C3340-2: RNCC: 3 | RNVC: 2

21 Aug 1981

3040-01-117-7362
Rigid Connecting Link

011177362
145C3340-11: RNCC: 3 | RNVC: 2

21 Aug 1981

3040-01-117-7365
Rigid Connecting Link

011177365
145CS360-3: RNCC: 1 | RNVC: 2
1328-3: RNCC: 3 | RNVC: 2
145CS360-3: RNCC: 5 | RNVC: 2
145CS360-3: RNCC: 5 | RNVC: 2
145C3360-1: RNCC: 5 | RNVC: 9
145CS360-5: RNCC: E | RNVC: 8

21 Aug 1981

3040-01-117-8658
Rigid Connecting Link

011178658
5166025: RNCC: 3 | RNVC: 2

23 Aug 1981

3040-01-118-2012
Shouldered Shaft

011182012
22511513: RNCC: 3 | RNVC: 2
22511513: RNCC: 3 | RNVC: 9

29 Aug 1981

3040-01-118-7496
Shaft Collar

011187496
3168726-1: RNCC: 3 | RNVC: 2
3168726-1: RNCC: 5 | RNVC: 9
10106776: RNCC: 6 | RNVC: 9
3168726: RNCC: D | RNVC: 9

10 Sep 1981

3040-01-118-6227
Rigid Connecting Link

011186227
145CS360-1: RNCC: 1 | RNVC: 2
1328-1: RNCC: 3 | RNVC: 2
145CS360-1: RNCC: 5 | RNVC: 2
145CS360: RNCC: D | RNVC: 9

6 Sep 1981

3040-01-121-0895
Valve Shaft

011210895
20428-1680: RNCC: 3 | RNVC: 2
20428-001 REV B FIND 60: RNCC: 5 | RNVC: 9
20428-001: RNCC: D | RNVC: 9

30 Oct 1981

3040-01-121-1615
Shouldered Shaft

011211615
6C50B-1: RNCC: 3 | RNVC: 2

31 Oct 1981

3040-01-120-8156
Shouldered Shaft

011208156
58313-40163-1: RNCC: 3 | RNVC: 2

23 Oct 1981

3040-01-120-3041
Body Hub

011203041
11682127-1: RNCC: 3 | RNVC: 2
11682127: RNCC: 3 | RNVC: 2
11631808: RNCC: D | RNVC: 9

15 Oct 1981

3040-01-121-7955
Spur Gearshaft

011217955
504614: RNCC: 3 | RNVC: 2
504614: RNCC: 5 | RNVC: 9

8 Nov 1981

3040-01-121-9637
Remote Control Lever

011219637
74228: RNCC: 3 | RNVC: 9
X92041 PIECE-16: RNCC: 5 | RNVC: 9
X92401 PIECE-16: RNCC: C | RNVC: 1

11 Nov 1981

3040-01-122-8334
Rigid Connecting Link

011228334
74A800743-2001: RNCC: 3 | RNVC: 2
74A800743-2001: RNCC: 5 | RNVC: 9
74A800743-2001: RNCC: 5 | RNVC: 9
10106802: RNCC: 6 | RNVC: 9
74A800743: RNCC: D | RNVC: 9

29 Nov 1981

3040-01-123-7781
Shouldered Shaft

011237781
35 79501 2165 3: RNCC: 3 | RNVC: 2

17 Dec 1981

3040-01-124-3863
Accumulator Cap

011243863
2642-693-02 ITEM 2: RNCC: 3 | RNVC: 2
845-4687549 ITEM 2: RNCC: 5 | RNVC: 2
264269302-0002: RNCC: 5 | RNVC: 2
264269302-0002: RNCC: 5 | RNVC: 9
845-4687549: RNCC: D | RNVC: 9

1 Jan 1982

3040-01-125-3017
Control Cam

011253017
74A350741-2001: RNCC: 3 | RNVC: 2
74A350741-2001: RNCC: 5 | RNVC: 2
10106810: RNCC: 6 | RNVC: 9

25 Jan 1982

3040-01-125-5536
Idler Shaft

011255536
1059772: RNCC: 3 | RNVC: 2
8N4959: RNCC: 5 | RNVC: 9

29 Jan 1982

3040-01-123-6840
Bell Crank

011236840
12308332: RNCC: 3 | RNVC: 2

16 Dec 1981

3040-01-125-8360
Shouldered Shaft

011258360
2046392-2: RNCC: 3 | RNVC: 2
2046392-2: RNCC: 5 | RNVC: 2
2046392-2: RNCC: 5 | RNVC: 9
10106823: RNCC: 6 | RNVC: 9

1 Feb 1982

3040-01-125-8847
Spur Gearshaft

011258847
64356-04007-101: RNCC: 3 | RNVC: 2
64356-04007-101: RNCC: 5 | RNVC: 2
64356-04007-101: RNCC: 5 | RNVC: 9

1 Feb 1982

3040-01-125-8864
Linear Actuating Cylinder Piston

011258864
74A635615-2001: RNCC: 3 | RNVC: 2
74A635615-2001: RNCC: 5 | RNVC: 2
10106826: RNCC: 6 | RNVC: 9

1 Feb 1982

3040-01-125-9183
Spur Gearshaft

011259183
65393-04016-101: RNCC: 3 | RNVC: 2

1 Feb 1982

3040-01-126-6162
Linear Actuating Cylinder Piston Rod

011266162
65261-08067-101: RNCC: 3 | RNVC: 2

14 Feb 1982

3040-01-126-6034
Landing Gear Main Axle Shaft

011266034
65261-08035-101: RNCC: 3 | RNVC: 2
65261-08035-101: RNCC: 5 | RNVC: 9
65261-08035-101: RNCC: 5 | RNVC: 9

14 Feb 1982

3040-01-126-6236
Rigid Connecting Link

011266236
65122-11257-058: RNCC: 3 | RNVC: 2

14 Feb 1982

3040-01-129-5887
Shaft

011295887
8N3312: RNCC: 3 | RNVC: 2
8N3313: RNCC: C | RNVC: 1

8 Apr 1982

3040-01-060-8899
Shouldered Shaft

010608899
584661-1: RNCC: 3 | RNVC: 2
584661-1: RNCC: 5 | RNVC: 2
584661-1: RNCC: 5 | RNVC: 9

4 Jun 1978

3040-01-061-0802
Cylinder Wiper

010610802
87832-1627 ITEM 16: RNCC: 3 | RNVC: 2
709-4684898 ITE: RNCC: C | RNVC: 1
709-4684898 ITEM 16: RNCC: D | RNVC: 9

11 Jun 1978

3040-01-063-5217
Counterbalance Weight

010635217
579-1006-14: RNCC: 3 | RNVC: 2
10163672: RNCC: 6 | RNVC: 9

8 Aug 1978

3040-01-063-5218
Counterbalance Weight

010635218
579-1006-18: RNCC: 3 | RNVC: 2

8 Aug 1978

3040-01-065-7047
Remote Control Lever

010657047
4674130 ITEM 3: RNCC: 3 | RNVC: 2
28-55-0138 ITEM 3: RNCC: 3 | RNVC: 9
515-4674130 ITEM 3: RNCC: 5 | RNVC: 2
87552-0622 ITEM 3: RNCC: 5 | RNVC: 9
515-4674130: RNCC: D | RNVC: 9
87552-0622: RNCC: D | RNVC: 9

22 Sep 1978

3040-01-066-4240
Straight Shaft

010664240
11625071: RNCC: 3 | RNVC: 2
6880-35: RNCC: 5 | RNVC: 9
6880-105: RNCC: D | RNVC: 9

9 Oct 1978

3040-01-065-5017
Rigid Connecting Link

010655017
4500-291: RNCC: 3 | RNVC: 2
4029-15: RNCC: 5 | RNVC: 9
68B618000-291: RNCC: 7 | RNVC: 2

20 Sep 1978

3040-01-067-5068
Shouldered Shaft

010675068
507311: RNCC: 3 | RNVC: 2
507311: RNCC: 5 | RNVC: 9
507311: RNCC: 5 | RNVC: 9

1 Nov 1978

3040-01-067-9818
Linear Actuating Cylinder

010679818
508325: RNCC: 3 | RNVC: 2
508325: RNCC: 5 | RNVC: 9
508325M: RNCC: 5 | RNVC: 9
508325: RNCC: 5 | RNVC: 9
508235: RNCC: C | RNVC: 1
508125: RNCC: C | RNVC: 1

12 Nov 1978

3040-01-068-0403
Rotating Shaft Eye Bracket

010680403
00563001: RNCC: 3 | RNVC: 2
69398: RNCC: 5 | RNVC: 9

15 Nov 1978

3040-01-069-9123
Control Cam

010699123
68A350728-1007: RNCC: 3 | RNVC: 2
68A350728-1007: RNCC: 5 | RNVC: 2
68A350728-1007: RNCC: 5 | RNVC: 2
68A350728: RNCC: 5 | RNVC: 9
68A350728-1005: RNCC: 5 | RNVC: 9

28 Dec 1978

3040-01-069-2070
Shouldered Shaft

010692070
3146533: RNCC: 3 | RNVC: 2
346013-000: RNCC: 5 | RNVC: 2
346013-000: RNCC: 5 | RNVC: 9
3040PL0840756: RNCC: 6 | RNVC: 9

10 Dec 1978

3040-01-073-7682
Helical Gearshaft

010737682
12284919: RNCC: 3 | RNVC: 2
XM21794: RNCC: 5 | RNVC: 9
12274719: RNCC: 5 | RNVC: 9

21 Mar 1979

3040-01-076-2616
Counterbalance Weight

010762616
387384CL1: RNCC: 3 | RNVC: 2
387384CL1: RNCC: 5 | RNVC: 2

3 May 1979

3040-01-077-1137
Piston Ring

010771137
8503102: RNCC: 3 | RNVC: 2
5031-2PC: RNCC: 5 | RNVC: 9

18 May 1979

3040-01-077-1547
Shouldered Shaft

010771547
12282114: RNCC: 3 | RNVC: 2

18 May 1979

3040-01-078-1279
Shaft Retaining Plate

010781279
12283222: RNCC: 3 | RNVC: 2

9 Jun 1979

3040-01-078-5434
Spur Gearshaft

010785434
1000598: RNCC: 3 | RNVC: 2

15 Jun 1979

3040-01-079-3469
Shouldered Shaft

010793469
MA280 21 023: RNCC: 3 | RNVC: 2
17741900: RNCC: 3 | RNVC: 2
177419: RNCC: 5 | RNVC: 9

1 Jul 1979

3040-01-079-4796
Remote Control Lever

010794796
12267436: RNCC: 1 | RNVC: 2
23011024: RNCC: 3 | RNVC: 2
23011024: RNCC: 5 | RNVC: 2
DAX12647: RNCC: 5 | RNVC: 9

7 Jul 1979

3040-01-079-3468
Shouldered Shaft

010793468
208119: RNCC: 3 | RNVC: 9

1 Jul 1979

3040-01-083-5650
Spur Gearshaft

010835650
12267992: RNCC: 3 | RNVC: 2

26 Sep 1979

3040-01-083-9114
Shouldered Shaft

010839114
10934255: RNCC: 3 | RNVC: 2

4 Oct 1979

3040-01-084-2791
Linear Actuating Cylinder Gland

010842791
4685194-0007: RNCC: 3 | RNVC: 2
704-4685193 ITEM 8: RNCC: 5 | RNVC: 2
704-4685193: RNCC: D | RNVC: 9

14 Oct 1979

3040-01-088-1924
Shouldered Shaft

010881924
5034T77P01: RNCC: 3 | RNVC: 2

8 Jan 1980

3040-01-088-5014
Remote Control Lever

010885014
432B559 PC.1: RNCC: 3 | RNVC: 9
432B559P1: RNCC: 5 | RNVC: 9
7378E65P31: RNCC: 5 | RNVC: 9
432B559 PC.1: RNCC: 5 | RNVC: 9
432B559-1: RNCC: C | RNVC: 1
432B559 PC.1: RNCC: C | RNVC: 1
432B559 PC.1: RNCC: C | RNVC: 1

15 Jan 1980

3040-01-088-5725
Counterbalance Weight

010885725
1853297-2: RNCC: 3 | RNVC: 2

15 Jan 1980

3040-01-089-3956
Counterbalance Weight

010893956
387384CL3: RNCC: 3 | RNVC: 2

31 Jan 1980

3040-01-092-1694
Piston Ring Set

010921694
7014MR-160-T: RNCC: 3 | RNVC: 2
7014MR-160-T: RNCC: 5 | RNVC: 9

20 Mar 1980

3040-01-091-9089
Shouldered Shaft

010919089
712190: RNCC: 3 | RNVC: 2

15 Mar 1980

3040-01-092-6916
Manual Control Lever

010926916
274061-1: RNCC: 3 | RNVC: 2

31 Mar 1980

3040-01-094-2597
Straight Shaft

010942597
1C6172P24: RNCC: 3 | RNVC: 2
1C6172P24: RNCC: C | RNVC: 1

7 May 1980

3040-01-097-6508
Valve Shaft

010976508
20307-1030: RNCC: 3 | RNVC: 2

17 Jul 1980

3040-01-095-0126
Filler-Breather

010950126
AB1010-6: RNCC: 3 | RNVC: 2
1004909: RNCC: C | RNVC: 1

21 May 1980

3040-01-097-7336
Straight Shaft

010977336
AD34688-1: RNCC: 3 | RNVC: 2

18 Jul 1980

3040-01-097-8429
Shaft End Fitting

010978429
FT455X: RNCC: 3 | RNVC: 2
A2857X: RNCC: 5 | RNVC: 9

19 Jul 1980

3040-01-095-2059
Shouldered Shaft

010952059
5073J144-1: RNCC: 3 | RNVC: 2
5073J144: RNCC: D | RNVC: 9

24 May 1980

3040-01-095-7523
Rigid Connecting Link

010957523
70400-01255-104: RNCC: 1 | RNVC: 2
2020-1: RNCC: 3 | RNVC: 2
70400-01255-104 78286: RNCC: 5 | RNVC: 9
70400-01255-104: RNCC: 5 | RNVC: 9
SR11629A-104: RNCC: 5 | RNVC: 9
3040PL1960193: RNCC: 6 | RNVC: 9

5 Jun 1980

3040-01-098-2495
Bin Adjusting Shaft

010982495
9240-003-49: RNCC: 3 | RNVC: 2

29 Jul 1980

3040-01-098-2414
Roller Shaft

010982414
2661576: RNCC: 3 | RNVC: 2
2661576: RNCC: 5 | RNVC: 9
810-2223301-74: RNCC: C | RNVC: 1
810-2223301-74: RNCC: C | RNVC: 1

29 Jul 1980

3040-01-098-6878
Rigid Connecting Link

010986878
100023-1: RNCC: 3 | RNVC: 2
100023: RNCC: 5 | RNVC: 9

6 Aug 1980

3040-01-098-8282
Worm Shaft

010988282
NAFB3798A: RNCC: 3 | RNVC: 2
NAFB3798A: RNCC: 3 | RNVC: 9
3284035 PIECE 8: RNCC: 5 | RNVC: 2
3284035 PIECE 8: RNCC: 5 | RNVC: 9
CAFB3798A: RNCC: 5 | RNVC: 9
AFB3798A: RNCC: 5 | RNVC: 9
3284035 PIECE 8: RNCC: C | RNVC: 1
3284035: RNCC: D | RNVC: 9
3133151: RNCC: D | RNVC: 9
A1370AFB7C: RNCC: D | RNVC: 9

7 Aug 1980

3040-01-099-4658
Pawl

010994658
0330525: RNCC: 3 | RNVC: 2
330525: RNCC: 5 | RNVC: 2
324755: RNCC: 5 | RNVC: 9
330525: RNCC: 5 | RNVC: 9
0330525: RNCC: 5 | RNVC: 9
324755: RNCC: 5 | RNVC: 9
324755: RNCC: 5 | RNVC: 9
330525: RNCC: 5 | RNVC: 9
0330525: RNCC: 5 | RNVC: 9
0330525: RNCC: 5 | RNVC: 9

20 Aug 1980

3040-01-096-1133
Rigid Connecting Link

010961133
2009-1: RNCC: 3 | RNVC: 2
70400-02252-133: RNCC: 3 | RNVC: 2
1100070-133: RNCC: 5 | RNVC: 9
SR11773A: RNCC: 5 | RNVC: 9
3040PL1960189: RNCC: 6 | RNVC: 9

14 Jun 1980

3040-01-099-4409
Mechanical Drive Housing

010994409
37161901: RNCC: 3 | RNVC: 2
281970: RNCC: 5 | RNVC: 2
281970: RNCC: 5 | RNVC: 9

20 Aug 1980

3040-01-100-1917
Rigid Connecting Link

011001917
70400-01611-101: RNCC: 3 | RNVC: 2
70400-01611: RNCC: D | RNVC: 9

29 Aug 1980

3040-01-105-1025
Shouldered Shaft

011051025
2530947: RNCC: 3 | RNVC: 2

17 Dec 1980

3040-01-105-8981
Valve Shaft

011058981
N8043E-10HS1: RNCC: 3 | RNVC: 2
2-277-2: RNCC: 5 | RNVC: 9
N8043E-10-HS1 PIECE 4: RNCC: 5 | RNVC: 9

7 Jan 1981

3040-01-107-0399
Control Cam

011070399
5166397: RNCC: 3 | RNVC: 2

30 Jan 1981

3040-01-107-2157
Rigid Connecting Link

011072157
346590: RNCC: 3 | RNVC: 2

31 Jan 1981

3040-01-108-0264
Brake Disc

011080264
AS050703: RNCC: 3 | RNVC: 9
AS50703: RNCC: E | RNVC: 8

19 Feb 1981

3040-01-107-6899
Mechanical Drive Housing

011076899
845977: RNCC: 3 | RNVC: 2
845958 PC35: RNCC: 5 | RNVC: 2
845958: RNCC: D | RNVC: 9

11 Feb 1981

3040-01-108-5333
Remote Control Lever

011085333
12299043: RNCC: 3 | RNVC: 2
12299043: RNCC: 5 | RNVC: 2
10085834: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-109-2061
Shouldered Shaft

011092061
11628665: RNCC: 3 | RNVC: 2
11628665: RNCC: 5 | RNVC: 9

12 Mar 1981

3040-01-110-8935
Shouldered Shaft

011108935
12304476: RNCC: 3 | RNVC: 2

7 Apr 1981

3040-01-111-4061
Rigid Connecting Link

011114061
2600379: RNCC: 3 | RNVC: 2
2600379: RNCC: D | RNVC: 9

16 Apr 1981

3040-01-113-4569
Head Clamp

011134569
2642-693-02 ITEM 6: RNCC: 3 | RNVC: 2
845-4687549 ITEM 6: RNCC: 5 | RNVC: 2
2642-693-02 ITEM 6: RNCC: 5 | RNVC: 9
845-4687549 ITE: RNCC: C | RNVC: 1
2642-693-02: RNCC: D | RNVC: 9
845-4687549: RNCC: D | RNVC: 9

27 May 1981

3040-01-115-2384
Straight Shaft

011152384
11629005: RNCC: 3 | RNVC: 2

1 Jul 1981

3040-01-115-6688
Shouldered Shaft

011156688
729563: RNCC: 3 | RNVC: 2

11 Jul 1981

3040-01-115-9606
Linear Actuating Cylinder Assembly

011159606
90376783: RNCC: 3 | RNVC: 2
G101725: RNCC: 5 | RNVC: 9

17 Jul 1981

3040-01-116-0011
Rigid Connecting Link

011160011
2648813: RNCC: 3 | RNVC: 2

17 Jul 1981

3040-01-116-1308
Straight Shaft

011161308
167C2229: RNCC: 3 | RNVC: 2
167C2229: RNCC: 5 | RNVC: 2
10106768: RNCC: 6 | RNVC: 9

21 Jul 1981

3040-01-117-4772
Piston Rack

011174772
29173: RNCC: 3 | RNVC: 2
170-28415 ITEM 3: RNCC: 5 | RNVC: 2

15 Aug 1981

3040-01-118-7499
Shouldered Shaft

011187499
520-4457715 PIECE 12: RNCC: 3 | RNVC: 2
520-4457714 PIECE 12: RNCC: 5 | RNVC: 1
2300-550 PIECE 12: RNCC: 5 | RNVC: 2
2300-550: RNCC: D | RNVC: 9
520-4457714: RNCC: D | RNVC: 9

10 Sep 1981

3040-01-119-3035
Shouldered Shaft

011193035
AM9071: RNCC: 3 | RNVC: 2
10106794: RNCC: 6 | RNVC: 9

21 Sep 1981

3040-01-119-0604
Shouldered Shaft

011190604
3168810-2: RNCC: 3 | RNVC: 2
3168810-2: RNCC: 5 | RNVC: 9
10106786: RNCC: 6 | RNVC: 9
3168810: RNCC: D | RNVC: 9

16 Sep 1981

3040-01-118-8590
Mechanical Drive Housing

011188590
12292567: RNCC: 3 | RNVC: 2

13 Sep 1981

3040-01-119-6936
Shouldered Shaft

011196936
3167332-3: RNCC: 3 | RNVC: 2
3167332-3: RNCC: 5 | RNVC: 9
3167332: RNCC: D | RNVC: 9

30 Sep 1981

3040-01-120-0713
Straight Shaft

011200713
11450720-1: RNCC: 3 | RNVC: 2
11450720-1: RNCC: 5 | RNVC: 2
11450720-1: RNCC: 5 | RNVC: 2
11450720-1: RNCC: 5 | RNVC: 2
11450720-1: RNCC: 5 | RNVC: 2
11450720-1: RNCC: 5 | RNVC: 9

10 Oct 1981

3040-01-120-8563
Straight Shaft

011208563
13211E3127: RNCC: 3 | RNVC: 2

24 Oct 1981

3040-01-121-4589
Bell Crank

011214589
74A410686-1007: RNCC: 3 | RNVC: 2
74A410686-1007: RNCC: 5 | RNVC: 2
74A410686-1007: RNCC: 5 | RNVC: 2
74A410686-1007: RNCC: 5 | RNVC: 2
74A410686-1007: RNCC: 5 | RNVC: 9
74A410686-1007: RNCC: 5 | RNVC: 9
74A410686-1007: RNCC: 5 | RNVC: 9
74A410686-1007: RNCC: 5 | RNVC: 9
74A410686-1007: RNCC: 5 | RNVC: 9
74A410686-1007: RNCC: 5 | RNVC: 9

5 Nov 1981

3040-01-121-9535
Shouldered Shaft

011219535
87832-1605 ITEM 13: RNCC: 3 | RNVC: 2
709-4684876 ITEM 13: RNCC: 5 | RNVC: 2
709-4684876 ITE: RNCC: C | RNVC: 1
709-4684876: RNCC: D | RNVC: 9
87832-1605: RNCC: D | RNVC: 9

11 Nov 1981

3040-01-122-3983
Straight Shaft

011223983
503959: RNCC: 3 | RNVC: 2
503959: RNCC: 5 | RNVC: 9

20 Nov 1981

3040-01-123-2222
Counterbalance Weight

011232222
579-1006-31: RNCC: 3 | RNVC: 2
10163655: RNCC: 6 | RNVC: 9

8 Dec 1981

3040-01-123-2230
Counterbalance Weight

011232230
579-1047-04: RNCC: 3 | RNVC: 2
10163648: RNCC: 6 | RNVC: 9

8 Dec 1981

3040-01-125-7584
Shouldered Shaft

011257584
182218-1: RNCC: 3 | RNVC: 2
10106814: RNCC: 6 | RNVC: 9

1 Feb 1982

3040-01-125-7585
Shouldered Shaft

011257585
7605-0015-01: RNCC: 3 | RNVC: 2
10106815: RNCC: 6 | RNVC: 9

1 Feb 1982

3040-01-125-7332
Spur Gearshaft

011257332
64351-11094-105: RNCC: 3 | RNVC: 2
64351-11094-104: RNCC: 5 | RNVC: 9

1 Feb 1982

3040-01-125-8207
Rigid Connecting Link

011258207
74A180696-1001: RNCC: 3 | RNVC: 2
10106818: RNCC: 6 | RNVC: 9

1 Feb 1982

3040-01-125-9994
Shouldered Shaft

011259994
520-4674694 ITEM 13: RNCC: 3 | RNVC: 2
4674694-0013: RNCC: 5 | RNVC: 1
34-21-7820: RNCC: 5 | RNVC: 9
520-4674694: RNCC: D | RNVC: 9

5 Feb 1982

3040-01-126-3603
Manual Control Lever

011263603
12288681: RNCC: 3 | RNVC: 2

10 Feb 1982

3040-01-128-5876
Spur Gearshaft

011285876
2771555-101: RNCC: 3 | RNVC: 2
2771555-101: RNCC: 5 | RNVC: 9
10106850: RNCC: 6 | RNVC: 9
2771555: RNCC: D | RNVC: 9

25 Mar 1982

3040-01-129-3559
Shouldered Shaft

011293559
65662-03242-107: RNCC: 3 | RNVC: 2

5 Apr 1982

3040-01-129-3936
Rigid Connecting Link

011293936
65410-00023-044: RNCC: 3 | RNVC: 2

5 Apr 1982

3040-01-129-3938
Rigid Connecting Link

011293938
65410-00015-047: RNCC: 3 | RNVC: 2

5 Apr 1982

3040-01-129-3941
Rigid Connecting Link

011293941
65661-06260-052: RNCC: 3 | RNVC: 2

5 Apr 1982

3040-01-099-6458
Rigid Connecting Link

010996458
SR11714A: RNCC: 3 | RNVC: 2
2029-044: RNCC: 5 | RNVC: 2
70400-02268-044: RNCC: 5 | RNVC: 2
70400-02268-044: RNCC: 5 | RNVC: 2
70400-02268-044: RNCC: 5 | RNVC: 9
70400-02268-044: RNCC: 5 | RNVC: 9
70400-02268-044: RNCC: C | RNVC: 1

22 Aug 1980

3040-01-069-5924
Flexible Shaft Assembly

010695924
23502762: RNCC: 3 | RNVC: 2
6478819: RNCC: 5 | RNVC: 9

20 Dec 1978

3040-01-070-7370
Rigid Connecting Link

010707370
16K0571-863: RNCC: 3 | RNVC: 2
16K0571-863: RNCC: 5 | RNVC: 2
3040PL0666024: RNCC: 6 | RNVC: 9

18 Jan 1979

3040-01-061-3559
Counterbalance Weight

010613559
A334A049-102: RNCC: 3 | RNVC: 2

17 Jun 1978

3040-01-062-0006
Spur Gearshaft

010620006
4C27129-101A: RNCC: 3 | RNVC: 2

7 Jul 1978

3040-01-060-4770
Remote Control Lever

010604770
13211E9356: RNCC: 3 | RNVC: 2

24 May 1978

3040-01-059-4314
Straight Shaft

010594314
12266292: RNCC: 3 | RNVC: 2
666839-3: RNCC: 5 | RNVC: 9
666840-3: RNCC: 5 | RNVC: 9

12 Apr 1978

3040-01-061-0481
Helical Gearshaft

010610481
915134: RNCC: 3 | RNVC: 2
E-3942PC102: RNCC: 5 | RNVC: 2
E-3942: RNCC: D | RNVC: 9

10 Jun 1978

3040-01-060-8002
Manual Control Lever

010608002
DL1: RNCC: 3 | RNVC: 2
4018848: RNCC: 5 | RNVC: 2
DLHANDLE: RNCC: 5 | RNVC: 9
922744-5C: RNCC: 7 | RNVC: 2
195-0256-001: RNCC: C | RNVC: 1
204-0016-000: RNCC: C | RNVC: 1

1 Jun 1978

3040-01-061-5755
Shaft Retaining Plate

010615755
12253410: RNCC: 3 | RNVC: 2
3040010615755: RNCC: 6 | RNVC: 9
12253410: RNCC: 8 | RNVC: 2

24 Jun 1978

3040-01-067-0152
Counterbalance Weight

010670152
579-1020-05: RNCC: 3 | RNVC: 2

22 Oct 1978

3040-01-071-0587
Shaft Retaining Plate

010710587
11741734: RNCC: 3 | RNVC: 2

29 Jan 1979

3040-01-072-7468
Shaft Cored

010727468
7400-1400: RNCC: 3 | RNVC: 2
7400-1400: RNCC: 5 | RNVC: 9

3 Mar 1979

3040-01-073-0101
Linear Actuating Cylinder

010730101
12271524: RNCC: 1 | RNVC: 2
D-18131-A-2: RNCC: 3 | RNVC: 9
3-300-497-01: RNCC: 5 | RNVC: 2
H-092-DZ: RNCC: 5 | RNVC: 9
3040010730101: RNCC: 6 | RNVC: 9

7 Mar 1979

3040-01-073-4313
Spur Gearshaft

010734313
12267366: RNCC: 3 | RNVC: 2
12267366: RNCC: 5 | RNVC: 2
DAX11681: RNCC: 5 | RNVC: 9

15 Mar 1979

3040-01-073-3062
Linear Actuating Cylinder

010733062
12283312: RNCC: 3 | RNVC: 2

14 Mar 1979

3040-01-073-9905
Drum Cable Stowage Shaft

010739905
8-52B93: RNCC: 3 | RNVC: 9
8-52T-07 ITEM 10: RNCC: 5 | RNVC: 9
8-52B-93: RNCC: 5 | RNVC: 9
8-52T07ITEM10: RNCC: 5 | RNVC: 9

24 Mar 1979

3040-01-075-9874
Forwar Bearing Shoe

010759874
4674852-0024: RNCC: 3 | RNVC: 2

30 Apr 1979

3040-01-062-4185
Shouldered Shaft

010624185
2509121: RNCC: 3 | RNVC: 2

16 Jul 1978

3040-01-063-9314
Counterbalance Weight

010639314
579-1020-02: RNCC: 3 | RNVC: 2

14 Aug 1978

3040-01-064-0197
Journal Bearing Lining

010640197
3064G81-2: RNCC: 3 | RNVC: 9
3064G81PC2: RNCC: 5 | RNVC: 2
00781E496-27: RNCC: 5 | RNVC: 2

16 Aug 1978

3040-01-066-0409
Straight Shaft

010660409
726-143-001: RNCC: 3 | RNVC: 2
726-143-001: RNCC: 5 | RNVC: 1
726-143-001: RNCC: 5 | RNVC: 9

29 Sep 1978

3040-01-067-9761
Straight Shaft

010679761
65380: RNCC: 3 | RNVC: 2
A63012PC4: RNCC: 5 | RNVC: 2
1321: RNCC: 5 | RNVC: 9
A63012: RNCC: 5 | RNVC: 9

11 Nov 1978

3040-01-068-0085
Impeller Cla Collar

010680085
064-09228B: RNCC: 3 | RNVC: 2
005418321/44: RNCC: 5 | RNVC: 2
064-09228-000: RNCC: 5 | RNVC: 2
376L602/AE902 ITEM 44: RNCC: 5 | RNVC: 2
064-09228: RNCC: 5 | RNVC: 2
064-09228B: RNCC: 5 | RNVC: 2
376L602/AE902/44: RNCC: 5 | RNVC: 2
005418321 ITEM 44: RNCC: 5 | RNVC: 2
64-9228PB: RNCC: 5 | RNVC: 2
S612/20: RNCC: 5 | RNVC: 2

14 Nov 1978

3040-01-068-6199
Steam Seal Shaft

010686199
638A512: RNCC: 3 | RNVC: 2
7378E65P67: RNCC: 5 | RNVC: 2
A-3268167: RNCC: 5 | RNVC: 2
638A512: RNCC: C | RNVC: 1
638A512 PIECE 1: RNCC: C | RNVC: 1

30 Nov 1978

3040-01-074-9002
Rotating Shaft Eye Bracket

010749002
12273968: RNCC: 3 | RNVC: 2

10 Apr 1979

3040-01-075-9878
Aft Bearing Shoe

010759878
400-4674852 ITEM 4: RNCC: 3 | RNVC: 2
87631-0104 ITEM 4: RNCC: 5 | RNVC: 2
4674852-0004: RNCC: C | RNVC: 1

30 Apr 1979

3040-01-077-2219
Manual Control Lever

010772219
10277234: RNCC: 3 | RNVC: 2

19 May 1979

3040-01-077-4392
Rigid Connecting Link

010774392
4500-247: RNCC: 3 | RNVC: 2
68B618000-247: RNCC: 5 | RNVC: 2
45500: RNCC: D | RNVC: 9

23 May 1979

3040-01-078-7730
Rotating Shaft Eye Bracket

010787730
12272141: RNCC: 3 | RNVC: 2
12271628: RNCC: 5 | RNVC: 2

20 Jun 1979

3040-01-078-7731
Straight Shaft

010787731
12272013: RNCC: 3 | RNVC: 2

20 Jun 1979

3040-01-080-3284
Straight Shaft

010803284
12283899: RNCC: 3 | RNVC: 2
XM68640: RNCC: 5 | RNVC: 9

25 Jul 1979

3040-01-079-8348
Shouldered Shaft

010798348
18143FX2: RNCC: 3 | RNVC: 2
18143F2W: RNCC: 5 | RNVC: 9
18143FX2: RNCC: 5 | RNVC: 9

13 Jul 1979

3040-01-082-9133
Rotating Shaft Eye Bracket

010829133
12266513-2: RNCC: 3 | RNVC: 2
12266513: RNCC: D | RNVC: 9

13 Sep 1979

3040-01-083-9263
Shouldered Shaft

010839263
2775551-101: RNCC: 3 | RNVC: 2
2775551-101: RNCC: 5 | RNVC: 9

4 Oct 1979

3040-01-082-9828
Manual Control Lever

010829828
70301-01026-043: RNCC: 3 | RNVC: 2

14 Sep 1979

3040-01-082-4861
Shouldered Shaft

010824861
29-38253-1: RNCC: 3 | RNVC: 2

3 Sep 1979

3040-01-084-0572
Shouldered Shaft

010840572
515-4674115 ITEM 12: RNCC: 3 | RNVC: 2
87552-0607 ITEM 12: RNCC: 3 | RNVC: 2
515-4674115: RNCC: D | RNVC: 9

7 Oct 1979

3040-01-085-2116
Spur Gearshaft

010852116
42292E76: RNCC: 3 | RNVC: 2

2 Nov 1979

3040-01-085-5320
Cylinder Head

010855320
704-4685201 ITEM 3: RNCC: 3 | RNVC: 2
87861-1514 ITEM 3: RNCC: 3 | RNVC: 2
704-4685201: RNCC: D | RNVC: 9

10 Nov 1979

3040-01-087-0076
Push-Pull Control Assembly

010870076
6323-132: RNCC: 3 | RNVC: 2
MA47-21003: RNCC: 5 | RNVC: 2
6323-132: RNCC: 5 | RNVC: 9

8 Dec 1979

3040-01-087-4275
Shouldered Shaft

010874275
5035T82P01: RNCC: 3 | RNVC: 2
5035T82P01: RNCC: 5 | RNVC: 2

17 Dec 1979

3040-01-088-5118
Rigid Connecting Link

010885118
3009G40-001: RNCC: 3 | RNVC: 2
3009G40P1: RNCC: 3 | RNVC: 2
958E350 ITEM 30: RNCC: 5 | RNVC: 2
781E827P30: RNCC: 5 | RNVC: 2

15 Jan 1980

3040-01-090-6700
Counterbalance Weight

010906700
3033T37P06: RNCC: 3 | RNVC: 2

22 Feb 1980

3040-01-091-9088
Shouldered Shaft

010919088
111886C: RNCC: 3 | RNVC: 2
111886C: RNCC: 5 | RNVC: 9

15 Mar 1980

3040-01-092-6833
Accumulator Cap

010926833
N1457: RNCC: 3 | RNVC: 2
1810-1290 ITEM 27: RNCC: 5 | RNVC: 2
1810-1290: RNCC: D | RNVC: 9

31 Mar 1980

3040-01-096-4424
Linear Actuating Cylinder Assembly

010964424
3G4752: RNCC: 3 | RNVC: 2

18 Jun 1980

3040-01-097-7335
Straight Shaft

010977335
AD34687-1: RNCC: 3 | RNVC: 2

18 Jul 1980

3040-01-098-2595
Straight Shaft

010982595
C135374-1: RNCC: 3 | RNVC: 2

29 Jul 1980

3040-01-098-7625
Bell Crank

010987625
70400-01206-041: RNCC: 3 | RNVC: 2
3040PL1949310: RNCC: 6 | RNVC: 9

7 Aug 1980

3040-01-099-2374
Rigid Connecting Link

010992374
2227063-5: RNCC: 3 | RNVC: 2
2227063-5: RNCC: 3 | RNVC: 9

15 Aug 1980

3040-01-099-6327
Mechanical Drive Housing

010996327
12488629: RNCC: 1 | RNVC: 2
3-130-840-03: RNCC: 3 | RNVC: 2
12302019: RNCC: 5 | RNVC: 9

22 Aug 1980

3040-01-100-9341
Rigid Connecting Link

011009341
3529-3: RNCC: 3 | RNVC: 2
160C611501-3: RNCC: 7 | RNVC: 9
160C611501-3: RNCC: C | RNVC: 1

16 Sep 1980

3040-01-101-1823
Linear Actuating Cylinder

011011823
G103216: RNCC: 3 | RNVC: 2

21 Sep 1980

3040-01-102-8208
Bell Crank

011028208
12280574: RNCC: 3 | RNVC: 2
3040011028208: RNCC: 6 | RNVC: 9
12280574: RNCC: D | RNVC: 9

29 Oct 1980

3040-01-103-3002
Shouldered Shaft

011033002
964028-101: RNCC: 3 | RNVC: 2

11 Nov 1980

3040-01-104-4600
Shaft Collar

011044600
X117-C-8A: RNCC: 3 | RNVC: 2
1TD703: RNCC: 5 | RNVC: 2
1TD703: RNCC: 5 | RNVC: 9
117C8A: RNCC: C | RNVC: 1
X9816J: RNCC: D | RNVC: 9

5 Dec 1980

3040-01-106-8083
Shouldered Shaft

011068083
12294766: RNCC: 3 | RNVC: 2
10160572: RNCC: 6 | RNVC: 9

25 Jan 1981

3040-01-107-0534
Operating Shaft

011070534
X74222 PIECE 3: RNCC: 3 | RNVC: 9
71337: RNCC: 5 | RNVC: 9
X74222: RNCC: D | RNVC: 9

30 Jan 1981

3040-01-108-5306
Rigid Connecting Link

011085306
12297121: RNCC: 3 | RNVC: 2
12297121: RNCC: 5 | RNVC: 2

1 Mar 1981

3040-01-108-5331
Remote Control Lever

011085331
12299093-1: RNCC: 3 | RNVC: 2
10085832: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-108-5330
Remote Control Lever

011085330
12298901: RNCC: 3 | RNVC: 2
12298901: RNCC: 5 | RNVC: 9
10085831: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-108-5393
Manual Control Lever

011085393
12299056: RNCC: 3 | RNVC: 2
10085847: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-108-9126
Remote Control Lever

011089126
7529324: RNCC: 3 | RNVC: 2
2510011089126: RNCC: 6 | RNVC: 9

8 Mar 1981

3040-01-108-5341
Bell Crank

011085341
12299000: RNCC: 3 | RNVC: 2
12299000: RNCC: 5 | RNVC: 2
10085842: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-108-5345
Bell Crank

011085345
12299021: RNCC: 3 | RNVC: 2
10085845: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-111-3633
Piston Rod Ring

011113633
74A450616-2001: RNCC: 3 | RNVC: 2
74A450616-2001: RNCC: 5 | RNVC: 2
74A450616-2001: RNCC: 5 | RNVC: 2
74A450616-2001: RNCC: 5 | RNVC: 2
74A450616-2001: RNCC: 5 | RNVC: 2
74A450616-2001: RNCC: 5 | RNVC: 2
74A450616-2001: RNCC: 5 | RNVC: 2
74A450616-2001: RNCC: 5 | RNVC: 9
74A450616-2001: RNCC: 5 | RNVC: 9
74A450616-2001: RNCC: 5 | RNVC: 9

15 Apr 1981

3040-01-111-0520
Body Hub

011110520
40226: RNCC: 3 | RNVC: 2

9 Apr 1981

3040-01-111-4400
Shaft Collar

011114400
1580430-2: RNCC: 3 | RNVC: 2
1580430-2: RNCC: 5 | RNVC: 9
1580430: RNCC: D | RNVC: 9

17 Apr 1981

3040-01-112-8533
Shouldered Shaft

011128533
12294124-1: RNCC: 3 | RNVC: 2
12294124-1: RNCC: 5 | RNVC: 1
12294124-1: RNCC: 5 | RNVC: 9

11 May 1981

3040-01-112-3491
Flexible Drive Shaft

011123491
8229-101: RNCC: 3 | RNVC: 2
13025094-1: RNCC: 5 | RNVC: 2
407-8229-101: RNCC: 5 | RNVC: 9
10085852: RNCC: 6 | RNVC: 9
13025094: RNCC: D | RNVC: 9

1 May 1981

3040-01-113-4292
Bell Crank

011134292
3365509-1: RNCC: 3 | RNVC: 2
3365509-1: RNCC: 5 | RNVC: 2
3365509-1: RNCC: 5 | RNVC: 9

22 May 1981

3040-01-113-6876
Straight Shaft

011136876
3365685-1: RNCC: 3 | RNVC: 2
3365685-1: RNCC: 5 | RNVC: 2
3365685-1: RNCC: 5 | RNVC: 9

2 Jun 1981

3040-01-113-6877
Straight Shaft

011136877
3365757-1: RNCC: 3 | RNVC: 2
3365757-1: RNCC: 5 | RNVC: 2
3365757-1: RNCC: 5 | RNVC: 2

2 Jun 1981

3040-01-113-7867
Straight Shaft

011137867
S069636: RNCC: 3 | RNVC: 2
69636: RNCC: 5 | RNVC: 9
S0L9636: RNCC: 5 | RNVC: 9
X74221 PIECE 28: RNCC: 5 | RNVC: 9
X74221: RNCC: D | RNVC: 9

4 Jun 1981

3040-01-114-4692
Linear Actuating Cylinder Assembly

011144692
37-210-45: RNCC: 3 | RNVC: 2
WSS96191: RNCC: 5 | RNVC: 2
MSS91492-4: RNCC: C | RNVC: 1

17 Jun 1981

3040-01-115-5584
Rigid Connecting Link

011155584
74A411508-1001: RNCC: 3 | RNVC: 2
74A411508-1001: RNCC: 5 | RNVC: 2
74A411508-1001: RNCC: 5 | RNVC: 2
74A411508-1001: RNCC: 5 | RNVC: 2
74A411508-1001: RNCC: 5 | RNVC: 2
74A411508-1001: RNCC: 5 | RNVC: 2
74A411508-1001: RNCC: 5 | RNVC: 2
74A411508-1001: RNCC: 5 | RNVC: 2
74A411508-1001: RNCC: 5 | RNVC: 9
74A411508-1001: RNCC: 5 | RNVC: 9

9 Jul 1981

3040-01-116-4719
S Push Rod Assembly

011164719
70400-02264-062: RNCC: 3 | RNVC: 2
70400-02264-062: RNCC: 5 | RNVC: 2
70400-02264-052: RNCC: 5 | RNVC: 9
3040PL1971134: RNCC: 6 | RNVC: 9
70400-02264-062: RNCC: 7 | RNVC: 2

28 Jul 1981

3040-01-117-1392
Manual Control Lever

011171392
4570518: RNCC: 3 | RNVC: 2

9 Aug 1981

3040-01-117-6410
Shouldered Shaft

011176410
12294112: RNCC: 3 | RNVC: 2
12294112: RNCC: 5 | RNVC: 1
12294112: RNCC: 5 | RNVC: 9

19 Aug 1981

3040-01-117-7363
Rigid Connecting Link

011177363
145C3340-12: RNCC: 3 | RNVC: 2
145C3340-12: RNCC: 5 | RNVC: 2

21 Aug 1981

3040-01-117-7366
Rigid Connecting Link

011177366
145P1016-1: RNCC: 3 | RNVC: 2
145P1016-1: RNCC: 5 | RNVC: 2

21 Aug 1981

3040-01-118-3817
Body Hub

011183817
58313-41741: RNCC: 3 | RNVC: 2

3 Sep 1981

3040-01-118-9402
Rigid Connecting Link

011189402
167C2186-2: RNCC: 3 | RNVC: 2
10106784: RNCC: 6 | RNVC: 9
167C2186: RNCC: D | RNVC: 9

14 Sep 1981

3040-01-119-7787
Rigid Connecting Link

011197787
12300148-3: RNCC: 3 | RNVC: 2
10085861: RNCC: 6 | RNVC: 9

4 Oct 1981

3040-01-121-4728
Shaft

011214728
10082: RNCC: 3 | RNVC: 2

5 Nov 1981

3040-01-122-8217
Straight Shaft

011228217
5542005: RNCC: 3 | RNVC: 2

29 Nov 1981

3040-01-122-3728
Shouldered Shaft

011223728
20481-1020: RNCC: 3 | RNVC: 2
20481-002 FIND 8: RNCC: 5 | RNVC: 9
20481-002: RNCC: D | RNVC: 9

19 Nov 1981

3040-01-123-2220
Counterbalance Weight

011232220
579-1005-18: RNCC: 3 | RNVC: 2
10163064: RNCC: 6 | RNVC: 9

8 Dec 1981

3040-01-122-7747
Shouldered Shaft

011227747
2666969: RNCC: 3 | RNVC: 2
10106801: RNCC: 6 | RNVC: 9

28 Nov 1981

3040-01-124-7956
Rigid Connecting Link

011247956
74A661260-1001: RNCC: 3 | RNVC: 2
10106808: RNCC: 6 | RNVC: 9
74A661260: RNCC: D | RNVC: 9

12 Jan 1982

3040-01-125-0644
Shouldered Shaft

011250644
MBEU-65393: RNCC: 3 | RNVC: 2
MBEU-65393: RNCC: 5 | RNVC: 2

20 Jan 1982

3040-01-125-7583
Straight Shaft

011257583
MBEU-65582: RNCC: 3 | RNVC: 2

1 Feb 1982

3040-01-125-8206
Rigid Connecting Link

011258206
3930AS525: RNCC: 3 | RNVC: 2
74A733040-1001: RNCC: 5 | RNVC: 2
10130526: RNCC: 6 | RNVC: 9

1 Feb 1982

3040-01-125-8352
Straight Shaft

011258352
2022400-2-1: RNCC: 3 | RNVC: 2
2022400-2-1: RNCC: 5 | RNVC: 9
10106821: RNCC: 6 | RNVC: 9

1 Feb 1982

3040-01-125-9185
Spur Gearshaft

011259185
65391-11669-101: RNCC: 3 | RNVC: 2
65391-11669-101: RNCC: 5 | RNVC: 2
65391-1669-101: RNCC: 5 | RNVC: 9

1 Feb 1982

3040-01-126-4899
Shaft Gear

011264899
PR3408-1PIECE 93: RNCC: 3 | RNVC: 2
K1489: RNCC: 5 | RNVC: 2
PR3408-1PIECE 93: RNCC: 5 | RNVC: 9
K1489: RNCC: 5 | RNVC: 9

11 Feb 1982

3040-01-126-9605
Linear Actuating Cylinder Piston

011269605
2JB886: RNCC: 3 | RNVC: 2
2JB886: RNCC: 3 | RNVC: 9
1-JH-2076 PIECE 14: RNCC: 5 | RNVC: 2
H3226947-14: RNCC: 5 | RNVC: 2
2JB886: RNCC: 5 | RNVC: 9
2JB886: RNCC: C | RNVC: 1
1-JH-2076: RNCC: D | RNVC: 9
H3226947: RNCC: D | RNVC: 9

21 Feb 1982

3040-01-128-4666
Spur Gearshaft

011284666
6036-0030-01: RNCC: 3 | RNVC: 2
10106844: RNCC: 6 | RNVC: 9
6036-0030: RNCC: D | RNVC: 9

21 Mar 1982

3040-01-128-5724
Body Hub

011285724
12288130: RNCC: 3 | RNVC: 2
DAX12859: RNCC: E | RNVC: 8
12267890: RNCC: E | RNVC: 8

25 Mar 1982

3040-01-128-9250
Spur Gearshaft

011289250
4100205-2: RNCC: 3 | RNVC: 2
4100205-2: RNCC: 5 | RNVC: 9
4100205-1: RNCC: 5 | RNVC: 9
4100205-2: RNCC: 5 | RNVC: 9
10130544: RNCC: 6 | RNVC: 9

27 Mar 1982

3040-01-129-0859
Spur Gearshaft

011290859
1090192: RNCC: 3 | RNVC: 2

31 Mar 1982

3040-01-061-7729
Rigid Connecting Link

010617729
53G970720-172: RNCC: 3 | RNVC: 2

29 Jun 1978

3040-01-063-9315
Counterbalance Weight

010639315
579-1020-03: RNCC: 3 | RNVC: 2

14 Aug 1978

3040-01-064-7129
Truck Parts Kit

010647129
2SK27: RNCC: 3 | RNVC: 2
2SK27: RNCC: 5 | RNVC: 9

31 Aug 1978

3040-01-065-5118
Rigid Connecting Link

010655118
4789247-0004: RNCC: 3 | RNVC: 2
709-4789247 ITEM 4: RNCC: 5 | RNVC: 2
709-4789247 ITEM 4: RNCC: 5 | RNVC: 2

21 Sep 1978

3040-01-065-6171
Shouldered Shaft

010656171
7360-2: RNCC: 3 | RNVC: 2
7360-2: RNCC: 5 | RNVC: 2
3944845: RNCC: 5 | RNVC: 2
7360-2: RNCC: 5 | RNVC: 2
4HR147: RNCC: 5 | RNVC: 9
4HR147: RNCC: 5 | RNVC: 9

21 Sep 1978

3040-01-067-0077
Counterbalance Weight

010670077
579-1020-06: RNCC: 3 | RNVC: 2

22 Oct 1978

3040-01-067-3676
Linear Actuating Cylinder Piston

010673676
12110703-13: RNCC: 3 | RNVC: 2
12A073-13: RNCC: 5 | RNVC: 9

28 Oct 1978

3040-01-067-5065
Control Cam

010675065
A11878: RNCC: 3 | RNVC: 2
A-11878: RNCC: 5 | RNVC: 9
SH8796 DET 59: RNCC: 5 | RNVC: 9
536274: RNCC: 5 | RNVC: 9

1 Nov 1978

3040-01-067-5064
Control Finger

010675064
A10350: RNCC: 3 | RNVC: 2
A-10350: RNCC: 5 | RNVC: 9

1 Nov 1978

3040-01-067-3257
Brake Arm

010673257
60125: RNCC: 3 | RNVC: 2
60125: RNCC: 3 | RNVC: 2
60125: RNCC: 5 | RNVC: 9

28 Oct 1978

3040-01-069-5500
Manual Control Lever

010695500
557AS105-1: RNCC: 3 | RNVC: 2
557AS105-1: RNCC: 5 | RNVC: 2
557AS105-1: RNCC: 5 | RNVC: 2
557AS105-1: RNCC: 5 | RNVC: 2

19 Dec 1978

3040-01-073-0099
Shouldered Shaft

010730099
12267311: RNCC: 3 | RNVC: 2
DAX10935: RNCC: 5 | RNVC: 2

7 Mar 1979

3040-01-073-6037
Remote Control Lever

010736037
03206000: RNCC: 3 | RNVC: 2
69378: RNCC: 5 | RNVC: 9

17 Mar 1979

3040-01-073-7991
Straight Shaft

010737991
12285222: RNCC: 3 | RNVC: 2
XM62804: RNCC: 5 | RNVC: 9
12274722: RNCC: 5 | RNVC: 9

21 Mar 1979

3040-01-074-1141
Straight Shaft

010741141
68A580079-2005: RNCC: 3 | RNVC: 2
68A580079-2003: RNCC: C | RNVC: 1

26 Mar 1979

3040-01-074-4717
Shaft Collar

010744717
6291B: RNCC: 3 | RNVC: 9
6291B: RNCC: 5 | RNVC: 9
200114L PC297: RNCC: 5 | RNVC: 9
6291B: RNCC: C | RNVC: 1
6438B: RNCC: C | RNVC: 1
6291B: RNCC: C | RNVC: 1
200114L: RNCC: D | RNVC: 9
200113X: RNCC: D | RNVC: 9

31 Mar 1979

3040-01-074-5711
Shouldered Shaft

010745711
797-1505-001: RNCC: 3 | RNVC: 2

3 Apr 1979

3040-01-075-7909
Shouldered Shaft

010757909
12265898: RNCC: 3 | RNVC: 9
12265898: RNCC: 5 | RNVC: 2

26 Apr 1979

3040-01-075-1098
Rigid Connecting Link

010751098
366653: RNCC: 3 | RNVC: 2
9988-546 ITEM 159: RNCC: 5 | RNVC: 2
9987-961PC221: RNCC: 5 | RNVC: 2
366653: RNCC: 5 | RNVC: 9
9987-961: RNCC: D | RNVC: 9
9988-546: RNCC: D | RNVC: 9

13 Apr 1979

3040-01-078-7745
Shouldered Shaft

010787745
12271684: RNCC: 3 | RNVC: 2
12271709: RNCC: 5 | RNVC: 9

20 Jun 1979

3040-01-078-5757
Mechanical Drive Housing

010785757
12267127: RNCC: 3 | RNVC: 2
DAX12493: RNCC: 5 | RNVC: 2

16 Jun 1979

3040-01-078-7640
Rotating Shaft Eye Bracket

010787640
12285261: RNCC: 3 | RNVC: 2

20 Jun 1979

3040-01-082-1148
Spur Gearshaft

010821148
6882052: RNCC: 3 | RNVC: 2
D75481: RNCC: 5 | RNVC: 2

25 Aug 1979

3040-01-080-6048
Worm Shaft

010806048
11835091: RNCC: 3 | RNVC: 2

28 Jul 1979

3040-01-080-3285
Bell Crank

010803285
12283788: RNCC: 3 | RNVC: 2
XM67528: RNCC: 5 | RNVC: 9

25 Jul 1979

3040-01-083-0991
Shouldered Shaft

010830991
68692DX: RNCC: 3 | RNVC: 2
68692D: RNCC: 5 | RNVC: 9
68692DX: RNCC: 5 | RNVC: 9

16 Sep 1979

3040-01-083-2834
Ball Joint

010832834
6100126: RNCC: 3 | RNVC: 2
0107376: RNCC: 5 | RNVC: 9
R110G: RNCC: C | RNVC: 1
7HE475: RNCC: C | RNVC: 1

20 Sep 1979

3040-01-083-5607
Flexible Casing Coupling Nut

010835607
12284031: RNCC: 3 | RNVC: 2
XM66163: RNCC: 5 | RNVC: 9

26 Sep 1979

3040-01-083-4772
Rotating Shaft Eye Bracket

010834772
10952255: RNCC: 3 | RNVC: 2

24 Sep 1979

3040-01-083-9113
Bell Crank

010839113
10934230: RNCC: 3 | RNVC: 2

4 Oct 1979

3040-01-085-2115
Spur Gearshaft

010852115
42292E63: RNCC: 3 | RNVC: 2

2 Nov 1979

3040-01-086-8868
Body Hub

010868868
3460892: RNCC: 3 | RNVC: 2
3460892: RNCC: 5 | RNVC: 9
3460892: RNCC: 5 | RNVC: 9

6 Dec 1979

3040-01-087-3905
Adjusting Shaft

010873905
11499221: RNCC: 3 | RNVC: 2

16 Dec 1979

3040-01-088-1148
Control Cam

010881148
9240-003-SHEET 73: RNCC: 3 | RNVC: 2
9240-003-73: RNCC: 5 | RNVC: 9
26800174: RNCC: 5 | RNVC: 9

6 Jan 1980

3040-01-088-1926
Shouldered Shaft

010881926
420610: RNCC: 3 | RNVC: 2

8 Jan 1980

3040-01-088-5260
Straight Shaft

010885260
0850-148: RNCC: 3 | RNVC: 2

15 Jan 1980

3040-01-089-4890
Control Cam

010894890
10915916-1: RNCC: 3 | RNVC: 2

2 Feb 1980

3040-01-089-7771
Nonaircraft Mechanical Actuator

010897771
12524075: RNCC: 3 | RNVC: 2
465-4075: RNCC: 5 | RNVC: 2
465-4075: RNCC: 5 | RNVC: 9
12524186: RNCC: C | RNVC: 1

7 Feb 1980

3040-01-090-0961
Bell Crank

010900961
12284215: RNCC: 3 | RNVC: 2
XM22318: RNCC: 5 | RNVC: 9
12283729: RNCC: 5 | RNVC: 9

13 Feb 1980

3040-01-090-0229
Rigid Connecting Link

010900229
4049T98G01: RNCC: 3 | RNVC: 2
4049T98G01: RNCC: 5 | RNVC: 2
4049T98G01: RNCC: 5 | RNVC: 9

10 Feb 1980

3040-01-090-5863
Shouldered Shaft

010905863
209-4788590-16: RNCC: 3 | RNVC: 2
209-4788590 ITE: RNCC: C | RNVC: 1

22 Feb 1980

3040-01-090-6292
Turbine Engine Counter Balance Weight

010906292
3033T43P01: RNCC: 3 | RNVC: 2

22 Feb 1980

3040-01-090-7937
Bell Crank

010907937
12283752: RNCC: 3 | RNVC: 2
XM66080: RNCC: 5 | RNVC: 9

24 Feb 1980

3040-01-091-0657
Shouldered Shaft

010910657
29-38252-1: RNCC: 3 | RNVC: 2

29 Feb 1980

3040-01-091-5044
Ball Joint

010915044
3951-1: RNCC: 3 | RNVC: 2
11-0802: RNCC: 5 | RNVC: 2
8644817: RNCC: 7 | RNVC: 2

8 Mar 1980

3040-01-093-1051
Linear Actuating Cylinder Head

010931051
28371: RNCC: 3 | RNVC: 2

10 Apr 1980

3040-01-092-0872
Straight Shaft

010920872
10252194-1: RNCC: 3 | RNVC: 2
10252194-1: RNCC: 5 | RNVC: 1

19 Mar 1980

3040-01-092-3948
Limit Stop Shaft

010923948
31046-1: RNCC: 3 | RNVC: 2

26 Mar 1980

3040-01-093-9086
Gearshaft Assembly

010939086
5073D117-9: RNCC: 3 | RNVC: 2

26 Apr 1980

3040-01-092-2079
Rigid Connecting Link

010922079
70400-01250-048: RNCC: 1 | RNVC: 2
2012-11: RNCC: 3 | RNVC: 2
70400-01250-048: RNCC: 5 | RNVC: 9
1100010-048: RNCC: 5 | RNVC: 9
SR10991A: RNCC: 5 | RNVC: 9
3040PL1951712: RNCC: 6 | RNVC: 9
70400-01250: RNCC: D | RNVC: 9

21 Mar 1980

3040-01-093-4927
Linear Actuating Cylinder Assembly

010934927
D135686-1: RNCC: 3 | RNVC: 2

19 Apr 1980

3040-01-095-6955
Rigid Connecting Link

010956955
70103-11009-101: RNCC: 3 | RNVC: 2
70103-11009-101: RNCC: 5 | RNVC: 2
70103-11009: RNCC: D | RNVC: 9

5 Jun 1980

3040-01-100-2729
Shouldered Shaft

011002729
65105-11505-103: RNCC: 3 | RNVC: 2
65105-11505-103: RNCC: 5 | RNVC: 9
65105-11505-103: RNCC: 5 | RNVC: 9

1 Sep 1980

3040-01-101-3980
Straight Shaft

011013980
12292458: RNCC: 3 | RNVC: 2

28 Sep 1980

3040-01-101-7147
Remote Control Lever

011017147
04100247: RNCC: 3 | RNVC: 2
361129: RNCC: 5 | RNVC: 2
350454: RNCC: 5 | RNVC: 2
A04100247: RNCC: 5 | RNVC: 9

5 Oct 1980

3040-01-100-7934
Shouldered Shaft

011007934
RE-B102136: RNCC: 3 | RNVC: 2
RE-B102136: RNCC: C | RNVC: 1
RE-B102136: RNCC: C | RNVC: 1

13 Sep 1980

3040-01-102-3469
Nonrotating Shaft Eye Bracket

011023469
12285760: RNCC: 3 | RNVC: 2
3040011023469: RNCC: 6 | RNVC: 9
XM66124: RNCC: E | RNVC: 8
12280423: RNCC: E | RNVC: 8

18 Oct 1980

3040-01-101-7500
Rigid Connecting Link

011017500
L78367: RNCC: 3 | RNVC: 2

5 Oct 1980

3040-01-102-6306
Extension Shaft

011026306
04100283: RNCC: 3 | RNVC: 2
360028: RNCC: 3 | RNVC: 2
360028: RNCC: 5 | RNVC: 2
1053-360028: RNCC: 5 | RNVC: 2

24 Oct 1980

3040-01-103-7303
Shouldered Shaft

011037303
845-4558718 ITEM 1: RNCC: 3 | RNVC: 2
2642-343-03 ITEM 1: RNCC: 5 | RNVC: 9
845-4558718: RNCC: D | RNVC: 9
2642-343-03: RNCC: D | RNVC: 9

18 Nov 1980

3040-01-105-1267
Valve Shaft

011051267
20825-005 FIND 10: RNCC: 3 | RNVC: 9
20825-1050: RNCC: 5 | RNVC: 2

17 Dec 1980

3040-01-107-7429
Launch Bar Drive Link

011077429
74A450909-2001: RNCC: 3 | RNVC: 2
74A450909-2001: RNCC: 5 | RNVC: 2
74A450909-2001: RNCC: 5 | RNVC: 2
74A450909-2001: RNCC: 5 | RNVC: 2
74A450909-2001: RNCC: 5 | RNVC: 2
74A450909-2001: RNCC: 5 | RNVC: 2
74A450909-2001: RNCC: 5 | RNVC: 2
74A450909-2001: RNCC: 5 | RNVC: 9
74A450909-2001: RNCC: 5 | RNVC: 9
74A450909-2001: RNCC: 5 | RNVC: 9

12 Feb 1981

3040-01-107-8113
Linear Directional Control Valve Shaft

011078113
20367-1020: RNCC: 3 | RNVC: 2
20367-001 FIND 6: RNCC: 5 | RNVC: 9
20367-001: RNCC: D | RNVC: 9

13 Feb 1981

3040-01-107-8261
Manual Control Lever

011078261
L101500: RNCC: 3 | RNVC: 2
01197901: RNCC: 3 | RNVC: 2
X10729: RNCC: 5 | RNVC: 9
01197900: RNCC: 5 | RNVC: 9

13 Feb 1981

3040-01-108-5312
Rigid Connecting Link

011085312
12299019: RNCC: 3 | RNVC: 2
10085830: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-108-5334
Remote Control Lever

011085334
12299017: RNCC: 3 | RNVC: 2
12299017: RNCC: 5 | RNVC: 2
10085835: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-109-4178
Shouldered Shaft

011094178
123149D: RNCC: 3 | RNVC: 2
123149D: RNCC: 5 | RNVC: 9

14 Mar 1981

3040-01-109-9122
Filter Wheel Shaft

011099122
12293425: RNCC: 3 | RNVC: 2
12293425: RNCC: 5 | RNVC: 1
12293425: RNCC: 5 | RNVC: 1
12293425: RNCC: 5 | RNVC: 1
12293425: RNCC: 5 | RNVC: 2

24 Mar 1981

3040-01-110-2565
Rigid Connecting Link

011102565
2600259: RNCC: 3 | RNVC: 2
2600259: RNCC: 5 | RNVC: 2

28 Mar 1981

3040-01-109-4589
Shouldered Shaft

011094589
11629036: RNCC: 3 | RNVC: 2

15 Mar 1981

3040-01-110-8936
Shouldered Shaft

011108936
12292457: RNCC: 3 | RNVC: 2

7 Apr 1981

3040-01-110-5590
Spur Gearshaft

011105590
12292384: RNCC: 3 | RNVC: 2

2 Apr 1981

3040-01-112-8769
Straight Shaft

011128769
3365709-1: RNCC: 3 | RNVC: 2
3365709-1: RNCC: 3 | RNVC: 2
3365709-1: RNCC: 5 | RNVC: 2

12 May 1981

3040-01-113-0860
Rigid Connecting Link

011130860
12297468: RNCC: 3 | RNVC: 2

15 May 1981

3040-01-113-5329
Cylinder Segmented Ring

011135329
2642-693-02 ITEM 4: RNCC: 3 | RNVC: 2
845-4687549 ITEM 4: RNCC: 5 | RNVC: 2
20-89-3500-MF: RNCC: C | RNVC: 1
2642-693-02: RNCC: D | RNVC: 9
845-4687549: RNCC: D | RNVC: 9

29 May 1981

3040-01-115-5544
Linear Actuating Cylinder Assembly

011155544
12298578: RNCC: 3 | RNVC: 2

9 Jul 1981

3040-01-116-0314
Rotating Shaft Eye Bracket

011160314
12298253: RNCC: 3 | RNVC: 2
12298253: RNCC: 3 | RNVC: 2
12298253: RNCC: 5 | RNVC: 2

18 Jul 1981

3040-01-116-5906
Manual Control Lever

011165906
5914-5: RNCC: 3 | RNVC: 2
7070-2: RNCC: 5 | RNVC: 9

30 Jul 1981

3040-01-116-8625
Control Cam

011168625
145447SA: RNCC: 3 | RNVC: 2
145447: RNCC: 5 | RNVC: 9
10153947: RNCC: 6 | RNVC: 9

4 Aug 1981

3040-01-117-6462
Brake Disc

011176462
47225-2: RNCC: 3 | RNVC: 2
10106775: RNCC: 6 | RNVC: 9

19 Aug 1981

3040-01-117-7353
Rigid Connecting Link

011177353
145C2013-3: RNCC: 3 | RNVC: 2

21 Aug 1981

3040-01-117-7355
Rigid Connecting Link

011177355
145CS360-2: RNCC: 1 | RNVC: 2
1328-2: RNCC: 3 | RNVC: 2
145CS360-2: RNCC: 5 | RNVC: 2
145CS360-2: RNCC: 5 | RNVC: 2
145C3361-1: RNCC: 5 | RNVC: 9
114CS360-4: RNCC: E | RNVC: 8

21 Aug 1981

3040-01-117-8536
Linear Actuating Cylinder Assembly

011178536
74915064: RNCC: 3 | RNVC: 2
4915064: RNCC: 5 | RNVC: 2
44823: RNCC: 5 | RNVC: 9
A44823: RNCC: 5 | RNVC: 9

23 Aug 1981

3040-01-119-0734
Spur Gearshaft

011190734
205F354: RNCC: 3 | RNVC: 2
10106790: RNCC: 6 | RNVC: 9

16 Sep 1981

3040-01-119-3061
Spur Gearshaft

011193061
AM10113: RNCC: 3 | RNVC: 9
AM9092: RNCC: 5 | RNVC: 2
AM9092: RNCC: 5 | RNVC: 9
10106795: RNCC: 6 | RNVC: 9

21 Sep 1981

3040-01-119-1240
Rotating Shaft Eye Bracket

011191240
12307266: RNCC: 3 | RNVC: 2

17 Sep 1981

3040-01-120-5734
Push-Pull Control Assembly

011205734
2584618-9: RNCC: 3 | RNVC: 2
2584618-9: RNCC: 5 | RNVC: 2
2584618-9: RNCC: 5 | RNVC: 2
2584618: RNCC: D | RNVC: 9

21 Oct 1981

3040-01-120-8561
Straight Shaft

011208561
13222E3737-1: RNCC: 3 | RNVC: 2
13222E3737-1: RNCC: 5 | RNVC: 9

24 Oct 1981

3040-01-121-1940
Shouldered Shaft

011211940
188733-0030: RNCC: 3 | RNVC: 2
281497-0001 ITEM 30: RNCC: 5 | RNVC: 9
281497-0001: RNCC: D | RNVC: 9

31 Oct 1981

3040-01-120-0168
Linear Actuating Cylinder Cap

011200168
29175: RNCC: 3 | RNVC: 2
170-28415 ITEM 5: RNCC: D | RNVC: 9

9 Oct 1981

3040-01-121-6085
Shaft

011216085
5146882: RNCC: 3 | RNVC: 2
3040PL0948062: RNCC: 6 | RNVC: 9

6 Nov 1981

3040-01-121-7744
Remote Control Lever

011217744
12277094: RNCC: 3 | RNVC: 2

8 Nov 1981

3040-01-122-1684
Hub Clamp

011221684
L4-4: RNCC: 3 | RNVC: 2

15 Nov 1981

3040-01-122-8150
Extension Shaft

011228150
2894928: RNCC: 3 | RNVC: 2

29 Nov 1981

3040-01-125-8849
Spur Gearshaft

011258849
64356-04017-101: RNCC: 3 | RNVC: 2

1 Feb 1982

3040-01-125-9782
Shouldered Shaft

011259782
2663807: RNCC: 3 | RNVC: 2
10106831: RNCC: 6 | RNVC: 9

3 Feb 1982

3040-01-126-3538
Nonrotating Shaft Eye Bracket

011263538
12288680: RNCC: 3 | RNVC: 2

10 Feb 1982

3040-01-126-6235
Rigid Connecting Link

011266235
65122-11257-055: RNCC: 3 | RNVC: 2

14 Feb 1982

3040-01-127-2628
Pump Oil Shaft

011272628
1123F82H01: RNCC: 3 | RNVC: 2
KMC-1123F82-1: RNCC: 3 | RNVC: 2
617F181G01 FIND 8: RNCC: 5 | RNVC: 2
617F82H01: RNCC: C | RNVC: 1

27 Feb 1982

3040-01-127-8809
Spur Gearshaft

011278809
2800441-1: RNCC: 3 | RNVC: 2
2800441-1: RNCC: 5 | RNVC: 2
2800441-1: RNCC: 5 | RNVC: 2
2800441-1: RNCC: 5 | RNVC: 2
2800441-1: RNCC: 5 | RNVC: 9
2800441-1: RNCC: C | RNVC: 1

10 Mar 1982

3040-01-127-1802
Bell Crank

011271802
87832-1633 ITEM 7: RNCC: 3 | RNVC: 2
709-4684904 ITEM 7: RNCC: 5 | RNVC: 2

24 Feb 1982

3040-01-128-4667
Spur Gearshaft

011284667
2040889-1: RNCC: 3 | RNVC: 2
2040889-1: RNCC: 5 | RNVC: 2
10106845: RNCC: 6 | RNVC: 9
2040889: RNCC: D | RNVC: 9

21 Mar 1982

3040-01-128-9333
Rigid Connecting Link

011289333
4701-1: RNCC: 3 | RNVC: 2
74J618000-105: RNCC: 5 | RNVC: 2
SR11573A105: RNCC: 5 | RNVC: 9
10106857: RNCC: 6 | RNVC: 9

27 Mar 1982

3040-01-129-0276
Fan Idler Pulley Arm

011290276
12269434: RNCC: 3 | RNVC: 2

31 Mar 1982

3040-01-128-9337
Rigid Connecting Link

011289337
6512-3: RNCC: 3 | RNVC: 2
SR11393A103: RNCC: 3 | RNVC: 2
SR11393A103: RNCC: 5 | RNVC: 9
10106860: RNCC: 6 | RNVC: 9
SR11393A: RNCC: D | RNVC: 9

27 Mar 1982

3040-01-129-3623
Connecting Adapter

011293623
65410-00023-043: RNCC: 3 | RNVC: 2

5 Apr 1982

3040-01-129-3924
Bell Crank

011293924
65414-03104-059: RNCC: 3 | RNVC: 2

5 Apr 1982

3040-01-129-3930
Bell Crank

011293930
74A615605-1001: RNCC: 3 | RNVC: 2
74A615605-1001: RNCC: 5 | RNVC: 9
10106867: RNCC: 6 | RNVC: 9

5 Apr 1982

3040-01-104-9154
Control Lever Assembly

011049154
12256356-1: RNCC: 3 | RNVC: 2

13 Dec 1980

3040-01-106-8199
Housing Adapter

011068199
12296709: RNCC: 3 | RNVC: 2

25 Jan 1981

3040-01-107-2361
Shouldered Shaft

011072361
12009059: RNCC: 3 | RNVC: 2

1 Feb 1981

3040-01-111-7051
Rigid Connecting Link

011117051
3365522-1: RNCC: 3 | RNVC: 2
3365522-1: RNCC: 3 | RNVC: 2
3365522-1: RNCC: 5 | RNVC: 2

22 Apr 1981

3040-01-059-6914
Hold Open Fwd Rod

010596914
204-70073-16: RNCC: 3 | RNVC: 2

15 Apr 1978

3040-01-062-6318
Controllable Swashplate

010626318
206-010-453-9: RNCC: 3 | RNVC: 2
206-010-453-113: RNCC: 5 | RNVC: 9

21 Jul 1978

3040-01-063-9313
Counterbalance Weight

010639313
579-1020-01: RNCC: 3 | RNVC: 2

14 Aug 1978

3040-01-067-5649
Straight Shaft

010675649
2P1170: RNCC: 3 | RNVC: 2
IPD2P1170: RNCC: 5 | RNVC: 9

3 Nov 1978

3040-01-069-0868
Lever

010690868
4N445: RNCC: 3 | RNVC: 2
4N0445: RNCC: 3 | RNVC: 2

8 Dec 1978

3040-01-069-4570
Control Cam

010694570
3146532: RNCC: 3 | RNVC: 2
346012-000: RNCC: 5 | RNVC: 2
346012-000: RNCC: 5 | RNVC: 9
3040PL0840751: RNCC: 6 | RNVC: 9

16 Dec 1978

3040-01-070-1214
Brake Disc

010701214
42277-160: RNCC: 3 | RNVC: 2
42277-160: RNCC: 5 | RNVC: 9
42277D160: RNCC: 5 | RNVC: 9

3 Jan 1979

3040-01-072-8158
Shouldered Shaft

010728158
12283274: RNCC: 3 | RNVC: 2

4 Mar 1979

3040-01-073-3073
Linear Actuating Cylinder Piston

010733073
12283377: RNCC: 1 | RNVC: 2
30981: RNCC: 3 | RNVC: 2
30981: RNCC: 3 | RNVC: 9
12283377: RNCC: 5 | RNVC: 9
12283377: RNCC: 5 | RNVC: 9
30981: RNCC: 5 | RNVC: 9

14 Mar 1979

3040-01-073-5873
Shaft Collar

010735873
1010B0015: RNCC: 3 | RNVC: 9

17 Mar 1979

3040-01-073-8001
Shouldered Shaft

010738001
12286020: RNCC: 3 | RNVC: 2
3-020-177X03: RNCC: 5 | RNVC: 2

21 Mar 1979

3040-01-074-6371
Shouldered Shaft

010746371
8-52-7: RNCC: 3 | RNVC: 9
8-52T-03-1 ITEM 7: RNCC: 5 | RNVC: 9
8-52T03-1ITEM7: RNCC: 5 | RNVC: 9
8-52-7: RNCC: 5 | RNVC: 9

6 Apr 1979

3040-01-077-4393
Rigid Connecting Link

010774393
4500-249: RNCC: 3 | RNVC: 2
4500: RNCC: D | RNVC: 9

23 May 1979

3040-01-077-6205
Straight Shaft

010776205
3017144: RNCC: 3 | RNVC: 2

26 May 1979

3040-01-078-0267
Rigid Connecting Link

010780267
196B7407: RNCC: 3 | RNVC: 2
10106751: RNCC: 6 | RNVC: 9

5 Jun 1979

3040-01-078-4377
Remote Control Lever

010784377
12283097: RNCC: 3 | RNVC: 2
XM66810: RNCC: 5 | RNVC: 9

13 Jun 1979

3040-01-078-4375
Remote Control Lever

010784375
12284999-1: RNCC: 3 | RNVC: 2
XM66579-1: RNCC: 5 | RNVC: 9

13 Jun 1979

3040-01-079-3028
Rigid Connecting Link

010793028
12278963: RNCC: 3 | RNVC: 2

1 Jul 1979

3040-01-081-0616
Control Cam Assembly

010810616
08640-20082: RNCC: 3 | RNVC: 2

8 Aug 1979

3040-01-079-8387
Shouldered Shaft

010798387
196B7411: RNCC: 3 | RNVC: 2

14 Jul 1979

3040-01-080-1198
Body Hub

010801198
03006602: RNCC: 3 | RNVC: 2
69391: RNCC: 5 | RNVC: 9

19 Jul 1979

3040-01-083-8521
Pawl

010838521
2775566-101: RNCC: 3 | RNVC: 2
2775566-101: RNCC: 3 | RNVC: 9

2 Oct 1979

3040-01-084-0264
Mechanical Drive Housing

010840264
196B8043: RNCC: 3 | RNVC: 2

6 Oct 1979

3040-01-080-6047
Shouldered Shaft

010806047
42292E32: RNCC: 3 | RNVC: 2

28 Jul 1979

3040-01-084-0543
Threaded Cylinder Rod

010840543
4685194-6: RNCC: 3 | RNVC: 2
704-4685193 ITEM 7: RNCC: 5 | RNVC: 2
4685194-0006: RNCC: 5 | RNVC: 9
704-4685193: RNCC: D | RNVC: 9

7 Oct 1979

3040-01-085-4222
Bell Crank

010854222
70400-02502-045: RNCC: 3 | RNVC: 2
70400-02502: RNCC: D | RNVC: 9

7 Nov 1979

3040-01-085-8917
Shouldered Shaft

010858917
4775959-0001: RNCC: 3 | RNVC: 2
845-4687756 PIECE 90: RNCC: 5 | RNVC: 2
845-4775959: RNCC: D | RNVC: 9

18 Nov 1979

3040-01-086-3040
Remote Control Lever

010863040
767594-1: RNCC: 3 | RNVC: 2

24 Nov 1979

3040-01-086-3250
Rigid Connecting Link

010863250
12269213: RNCC: 3 | RNVC: 2

25 Nov 1979

3040-01-089-3083
Straight Shaft

010893083
139C6866: RNCC: 3 | RNVC: 2
139C6866: RNCC: 5 | RNVC: 2
139C6866: RNCC: 5 | RNVC: 9

30 Jan 1980

3040-01-089-8021
Hub Clamp

010898021
L33789: RNCC: 3 | RNVC: 2
1204: RNCC: 3 | RNVC: 2
2-115B: RNCC: 5 | RNVC: 9

7 Feb 1980

3040-01-090-5952
Driv Governor Shaft

010905952
5140169: RNCC: 3 | RNVC: 2
3040PL0956246: RNCC: 6 | RNVC: 9

22 Feb 1980

Load More Results