What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 130 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 130 of 300

3040-01-123-1747
Rigid Connecting Link

011231747
3289-8: RNCC: 3 | RNVC: 2
10106804: RNCC: 6 | RNVC: 9
3289: RNCC: D | RNVC: 9

6 Dec 1981

3040-01-123-2219
Counterbalance Weight

011232219
579-1005-17: RNCC: 3 | RNVC: 2
10163644: RNCC: 6 | RNVC: 9

8 Dec 1981

3040-01-124-3838
Shouldered Shaft

011243838
B5-45-3274: RNCC: 3 | RNVC: 2

1 Jan 1982

3040-01-124-9319
Shouldered Shaft

011249319
12307394: RNCC: 3 | RNVC: 2

16 Jan 1982

3040-01-125-3141
Grease Cap

011253141
6037-0023-01: RNCC: 3 | RNVC: 2
10106812: RNCC: 6 | RNVC: 9

25 Jan 1982

3040-01-125-7471
Rigid Connecting Link

011257471
MBEU-65850: RNCC: 3 | RNVC: 2

1 Feb 1982

3040-01-125-8208
Rigid Connecting Link

011258208
6513-1-M: RNCC: 3 | RNVC: 2
SR11529A-101: RNCC: 5 | RNVC: 2
6513-1: RNCC: 5 | RNVC: 9
10106819: RNCC: 6 | RNVC: 9

1 Feb 1982

3040-01-126-9836
Thrust Collar

011269836
4 3/8-4025-1: RNCC: 3 | RNVC: 2
3205205 PIECE 1: RNCC: 5 | RNVC: 2
464025: RNCC: D | RNVC: 9

21 Feb 1982

3040-01-126-7838
Flexible Drive Shaft

011267838
12292480: RNCC: 3 | RNVC: 2

17 Feb 1982

3040-01-125-9855
Shaft

011259855
5139747: RNCC: 3 | RNVC: 2
01-125-9855: RNCC: 5 | RNVC: 2
3040PL0951918: RNCC: 6 | RNVC: 9

5 Feb 1982

3040-01-125-9976
Shouldered Shaft

011259976
7N9635: RNCC: 3 | RNVC: 2

5 Feb 1982

3040-01-126-6635
Shouldered Shaft

011266635
1D27-1: RNCC: 3 | RNVC: 2

15 Feb 1982

3040-01-128-5873
Bevel Gearshaft

011285873
2040691-1: RNCC: 3 | RNVC: 2
2040691-1: RNCC: 5 | RNVC: 9
2040691: RNCC: D | RNVC: 9

25 Mar 1982

3040-01-128-5475
Pawl

011285475
9348294: RNCC: 3 | RNVC: 2
22663: RNCC: 5 | RNVC: 1
3616630019: RNCC: 5 | RNVC: 2
711531507206: RNCC: 5 | RNVC: 9
10421321: RNCC: 6 | RNVC: 9

25 Mar 1982

3040-01-128-5903
Rigid Connecting Link

011285903
6512-17: RNCC: 3 | RNVC: 2
74B618011-117: RNCC: 5 | RNVC: 2
SR11393A117: RNCC: 5 | RNVC: 9
SR11393A117: RNCC: 5 | RNVC: 9
10106855: RNCC: 6 | RNVC: 9
74B618011-117: RNCC: 7 | RNVC: 2
SR11393A: RNCC: D | RNVC: 9

25 Mar 1982

3040-01-128-9334
Rigid Connecting Link

011289334
74A670236-1001: RNCC: 3 | RNVC: 2
10106858: RNCC: 6 | RNVC: 9
74A670236: RNCC: D | RNVC: 9

27 Mar 1982

3040-01-128-9332
Rigid Connecting Link

011289332
1534AS286: RNCC: 3 | RNVC: 2
1534AS286: RNCC: 5 | RNVC: 2
1534AS286: RNCC: 5 | RNVC: 2
1534AS286: RNCC: 5 | RNVC: 2
1534AS286: RNCC: 5 | RNVC: 2
1534AS286: RNCC: 5 | RNVC: 9
1534AS286: RNCC: 5 | RNVC: 9
D013537-501: RNCC: 5 | RNVC: 9
D013537-501: RNCC: 5 | RNVC: 9
10143581: RNCC: 6 | RNVC: 9

27 Mar 1982

3040-01-128-9338
Rigid Connecting Link

011289338
6512-11: RNCC: 3 | RNVC: 2
10106861: RNCC: 6 | RNVC: 9
SR11393A111: RNCC: C | RNVC: 1
6512: RNCC: D | RNVC: 9

27 Mar 1982

3040-01-129-2164
Rigid Connecting Link

011292164
12307466: RNCC: 3 | RNVC: 2

4 Apr 1982

3040-01-129-3927
Bell Crank

011293927
65414-03106-052: RNCC: 3 | RNVC: 2

5 Apr 1982

3040-01-129-3940
Rigid Connecting Link

011293940
65661-06260-044: RNCC: 3 | RNVC: 2

5 Apr 1982

3040-01-129-4632
Shouldered Shaft

011294632
24915: RNCC: 3 | RNVC: 2
24915: RNCC: 5 | RNVC: 2
24915: RNCC: 5 | RNVC: 9
24915: RNCC: 5 | RNVC: 9

7 Apr 1982

3040-01-129-3933
Rigid Connecting Link

011293933
65414-03112-043: RNCC: 3 | RNVC: 2

5 Apr 1982

3040-01-107-7426
Tachometer Drive Shaft

011077426
16701387: RNCC: 3 | RNVC: 9
16701387: RNCC: C | RNVC: 1

12 Feb 1981

3040-01-108-5308
Rigid Connecting Link

011085308
12299024: RNCC: 3 | RNVC: 2
12299024: RNCC: 5 | RNVC: 2
12299024: RNCC: 5 | RNVC: 9
10085829: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-104-9155
Control Lever Assembly

011049155
12256356-2: RNCC: 3 | RNVC: 2

13 Dec 1980

3040-01-108-5344
Bell Crank

011085344
12299244: RNCC: 3 | RNVC: 2
10085844: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-109-4302
Mechanical Drive Housing

011094302
12299074: RNCC: 3 | RNVC: 2
10085850: RNCC: 6 | RNVC: 9

15 Mar 1981

3040-01-106-8084
Shouldered Shaft

011068084
12294635: RNCC: 3 | RNVC: 2

25 Jan 1981

3040-01-125-6925
Shouldered Shaft

011256925
65125-11214-101: RNCC: 3 | RNVC: 2
65125-11214-101: RNCC: 5 | RNVC: 2
65125-11214-101: RNCC: 5 | RNVC: 2

1 Feb 1982

3040-01-127-8423
Shaft Collar

011278423
232-36242-1: RNCC: 3 | RNVC: 2

10 Mar 1982

3040-01-128-1515
Body Hub

011281515
838-743-041: RNCC: 3 | RNVC: 2

18 Mar 1982

3040-01-107-0398
Collar

011070398
5166263: RNCC: 3 | RNVC: 2

30 Jan 1981

3040-01-059-8335
Straight Shaft

010598335
162D622333-2001: RNCC: 3 | RNVC: 2
162D622333-2001: RNCC: 5 | RNVC: 2
160D622333-15: RNCC: 5 | RNVC: 2
160D622333-13: RNCC: 5 | RNVC: 9
160D622333-15: RNCC: 5 | RNVC: 9
160D622333-15: RNCC: C | RNVC: 1

16 Apr 1978

3040-01-060-8258
Shaft Collar

010608258
2006006-1: RNCC: 3 | RNVC: 9
2006006-1: RNCC: C | RNVC: 1

2 Jun 1978

3040-01-060-9347
Piston Ring

010609347
9333-00-0090-407: RNCC: 3 | RNVC: 2
9333-00-0000 PIECE 9: RNCC: 5 | RNVC: 2
9333-00-0000 PIECE 9: RNCC: 5 | RNVC: 9
9333-00-0090-407: RNCC: 5 | RNVC: 9
9333-00-0000: RNCC: 5 | RNVC: 9
9333-00-0090: RNCC: 5 | RNVC: 9
9333-00-0000: RNCC: D | RNVC: 9

7 Jun 1978

3040-01-061-2181
Counterbalance Weight

010612181
426836CLC: RNCC: 3 | RNVC: 2

14 Jun 1978

3040-01-063-9309
Counterbalance Weight

010639309
579-1024-03: RNCC: 3 | RNVC: 2

14 Aug 1978

3040-01-063-9310
Counterbalance Weight

010639310
579-1024-04: RNCC: 3 | RNVC: 2

14 Aug 1978

3040-01-063-9316
Counterbalance Weight

010639316
579-1020-04: RNCC: 3 | RNVC: 2

14 Aug 1978

3040-01-067-8943
Nonrotating Shaft Eye Bracket

010678943
12265821: RNCC: 3 | RNVC: 2

10 Nov 1978

3040-01-070-7372
Rigid Connecting Link

010707372
16K0571-861: RNCC: 3 | RNVC: 2
3040PL0666031: RNCC: 6 | RNVC: 9

18 Jan 1979

3040-01-070-5968
Straight Shaft

010705968
11625085: RNCC: 3 | RNVC: 2

14 Jan 1979

3040-01-071-2596
Control Cam

010712596
SM-C-890169: RNCC: 3 | RNVC: 2
SM-C-890169: RNCC: 3 | RNVC: 2

4 Feb 1979

3040-01-071-9669
Control Cam

010719669
42305-585: RNCC: 3 | RNVC: 2
42305-585: RNCC: 5 | RNVC: 9
42305D585: RNCC: 5 | RNVC: 9

17 Feb 1979

3040-01-072-2801
Straight Shaft

010722801
68A351020-2009: RNCC: 3 | RNVC: 2

26 Feb 1979

3040-01-072-8154
Rigid Connecting Link

010728154
12283260: RNCC: 3 | RNVC: 2

4 Mar 1979

3040-01-072-8042
Shaft Retaining Plate

010728042
12283262: RNCC: 3 | RNVC: 2

4 Mar 1979

3040-01-071-0790
Rigid Connecting Link

010710790
BACR24N6A120: RNCC: 3 | RNVC: 2
BACR24N: RNCC: D | RNVC: 9
65-40218: RNCC: D | RNVC: 9

29 Jan 1979

3040-01-071-5373
Sleeve Shaft

010715373
42277-356: RNCC: 3 | RNVC: 2
42277-356: RNCC: 5 | RNVC: 9
42277D356: RNCC: 5 | RNVC: 9

9 Feb 1979

3040-01-073-9705
Shaft Retaining Plate

010739705
12274143: RNCC: 3 | RNVC: 2
3040010739705: RNCC: 6 | RNVC: 9

24 Mar 1979

3040-01-074-9988
Rigid Connecting Link

010749988
212-001-055-101: RNCC: 3 | RNVC: 2
212-001-055-101: RNCC: 5 | RNVC: 2

11 Apr 1979

3040-01-075-9873
Port Bearing Shoe

010759873
4674852-0005: RNCC: 3 | RNVC: 2
4674852 ITEM 5: RNCC: 3 | RNVC: 2
87631-0104 ITEM 5: RNCC: 3 | RNVC: 2

30 Apr 1979

3040-01-077-2875
Straight Shaft

010772875
3017256: RNCC: 3 | RNVC: 2
3224079 ITEM 25: RNCC: 5 | RNVC: 2

20 May 1979

3040-01-077-1546
Shouldered Shaft

010771546
12282053: RNCC: 3 | RNVC: 2

18 May 1979

3040-01-077-4389
Rigid Connecting Link

010774389
4500-241: RNCC: 3 | RNVC: 2
4500: RNCC: D | RNVC: 9

23 May 1979

3040-01-077-6204
Straight Shaft

010776204
3017145: RNCC: 3 | RNVC: 2
3224073 ITEM 18: RNCC: 5 | RNVC: 2

26 May 1979

3040-01-081-0325
Bevel Gearshaft

010810325
5040T84P01: RNCC: 3 | RNVC: 2

7 Aug 1979

3040-01-081-7112
Hydraulic Parts Kit

010817112
NAVSEA LTR 388 SB-1A WITH ACCY: RNCC: 3 | RNVC: 2
SB-1A WITH ACCY: RNCC: C | RNVC: 1

18 Aug 1979

3040-01-083-7392
Cam Shaft

010837392
5073H128-1: RNCC: 3 | RNVC: 2

29 Sep 1979

3040-01-082-4749
Bevel Gearshaft

010824749
105D3896-2: RNCC: 3 | RNVC: 2
142D5271: RNCC: 5 | RNVC: 9
3040PL1754531: RNCC: 6 | RNVC: 9

3 Sep 1979

3040-01-082-4852
Bell Crank

010824852
1128CM42001-3: RNCC: 3 | RNVC: 2
1128CM42001-3: RNCC: 5 | RNVC: 9

3 Sep 1979

3040-01-085-2117
Spur Gearshaft

010852117
42292D62: RNCC: 3 | RNVC: 2

2 Nov 1979

3040-01-085-0803
Gearshaft

010850803
85413201940: RNCC: 3 | RNVC: 2

31 Oct 1979

3040-01-086-4135
Plate

010864135
845-4687550ITEM6: RNCC: 3 | RNVC: 2
4687550-0006: RNCC: 5 | RNVC: 2
36-01-7896: RNCC: 5 | RNVC: 9

28 Nov 1979

3040-01-086-4477
Manual Control Lever

010864477
69D4887-2: RNCC: 3 | RNVC: 2
316540: RNCC: 3 | RNVC: 9
9792: RNCC: 5 | RNVC: 9
69D4887-2: RNCC: 5 | RNVC: 9
69D4887-2: RNCC: 5 | RNVC: 9
69D4887: RNCC: D | RNVC: 9
316272: RNCC: D | RNVC: 9

29 Nov 1979

3040-01-089-0807
Hub Clamp

010890807
5073H178-1: RNCC: 3 | RNVC: 2

25 Jan 1980

3040-01-089-3088
Shouldered Shaft

010893088
117D2332: RNCC: 3 | RNVC: 2

30 Jan 1980

3040-01-089-3089
Shouldered Shaft

010893089
139C6867: RNCC: 3 | RNVC: 2

30 Jan 1980

3040-01-089-3091
Shouldered Shaft

010893091
162B8563: RNCC: 3 | RNVC: 2

30 Jan 1980

3040-01-090-3083
Counterbalance Weight

010903083
3033T37P14: RNCC: 3 | RNVC: 2

16 Feb 1980

3040-01-092-5932
Accumulator Cap

010925932
N-2244: RNCC: 3 | RNVC: 2
1810-1290 ITEM 22: RNCC: 5 | RNVC: 2
N1456: RNCC: 5 | RNVC: 9
N-2244: RNCC: C | RNVC: 1
1810-1290: RNCC: D | RNVC: 9

29 Mar 1980

3040-01-092-6832
Linear Actuating Cylinder Cap

010926832
N1455: RNCC: 3 | RNVC: 2
1809-1289 ITEM 9: RNCC: 5 | RNVC: 2
1810-1290 ITEM 19: RNCC: 5 | RNVC: 2
1809-1289: RNCC: D | RNVC: 9
1810-1290: RNCC: D | RNVC: 9

31 Mar 1980

3040-01-092-8371
Spur Gearshaft

010928371
87623-1005 ITEM 2: RNCC: 3 | RNVC: 2
518-4674779 ITEM 2: RNCC: 3 | RNVC: 2
518-4674779: RNCC: D | RNVC: 9

4 Apr 1980

3040-01-093-3062
Extension Shaft

010933062
384-1350-00: RNCC: 3 | RNVC: 2

15 Apr 1980

3040-01-093-9085
Gearshaft Assembly

010939085
5073D117-7: RNCC: 3 | RNVC: 2

26 Apr 1980

3040-01-095-4787
Shaft Collar

010954787
C1-9: RNCC: 3 | RNVC: 2
301B022599: RNCC: 5 | RNVC: 9
022599: RNCC: 7 | RNVC: 2

30 May 1980

3040-01-096-4578
Shouldered Shaft

010964578
729521: RNCC: 3 | RNVC: 2
1709857: RNCC: 5 | RNVC: 9

20 Jun 1980

3040-01-098-4348
Shouldered Shaft

010984348
621-2501-002: RNCC: 3 | RNVC: 2
621-2501: RNCC: D | RNVC: 9

1 Aug 1980

3040-01-099-0219
Linear Actuating Cylinder Assembly Parts Kit

010990219
9-752-100160: RNCC: 3 | RNVC: 9
9-752-100160: RNCC: 5 | RNVC: 2

10 Aug 1980

3040-01-099-2495
Shouldered Shaft

010992495
274086-1: RNCC: 3 | RNVC: 2

15 Aug 1980

3040-01-099-6469
Linear Actuating Cylinder

010996469
12288601: RNCC: 3 | RNVC: 2
12288601: RNCC: 5 | RNVC: 2
12288601: RNCC: 5 | RNVC: 2
12288601: RNCC: 5 | RNVC: 9

22 Aug 1980

3040-01-099-8474
Multiple Gears Gearshaft

010998474
12292360: RNCC: 3 | RNVC: 2

24 Aug 1980

3040-01-100-5058
Ball Joint

011005058
R107G: RNCC: 3 | RNVC: 2
139012: RNCC: 3 | RNVC: 2
R1076: RNCC: 5 | RNVC: 9
139012: RNCC: 5 | RNVC: 9

7 Sep 1980

3040-01-101-1578
Linear Actuating Cylinder Assembly Parts Kit

011011578
818-G107912: RNCC: 3 | RNVC: 2
G107912: RNCC: 3 | RNVC: 2
BJI-G103463: RNCC: 5 | RNVC: 2
G103463: RNCC: 5 | RNVC: 9

20 Sep 1980

3040-01-102-1657
Remote Control Lever

011021657
12292424: RNCC: 3 | RNVC: 2

12 Oct 1980

3040-01-102-5745
Straight Shaft

011025745
E114264: RNCC: 3 | RNVC: 2
234248: RNCC: 5 | RNVC: 9

22 Oct 1980

3040-01-102-2334
Rigid Connecting Link

011022334
160D725162-1: RNCC: 3 | RNVC: 2
160D725162-1: RNCC: 5 | RNVC: 9

16 Oct 1980

3040-01-103-0075
Shouldered Shaft

011030075
12009058: RNCC: 3 | RNVC: 2

1 Nov 1980

3040-01-103-2366
Spool-Groov Support

011032366
414121-1: RNCC: 3 | RNVC: 2
214121-1: RNCC: 5 | RNVC: 9

10 Nov 1980

3040-01-106-2270
Bell Crank

011062270
414C1160-1: RNCC: 3 | RNVC: 2

14 Jan 1981

3040-01-108-2164
Rigid Connecting Link

011082164
65400-00111-086: RNCC: 3 | RNVC: 2

23 Feb 1981

3040-01-108-6247
Extension Shaft

011086247
384-1129-00: RNCC: 3 | RNVC: 2

3 Mar 1981

3040-01-110-4313
Straight Shaft

011104313
12298247: RNCC: 3 | RNVC: 2

31 Mar 1981

3040-01-111-0787
Shouldered Shaft

011110787
009737: RNCC: 3 | RNVC: 2
633B009737: RNCC: 5 | RNVC: 9

9 Apr 1981

3040-01-111-4062
Rigid Connecting Link

011114062
12296853: RNCC: 3 | RNVC: 2

16 Apr 1981

3040-01-111-4741
Shouldered Shaft

011114741
12292448: RNCC: 3 | RNVC: 2

17 Apr 1981

3040-01-111-5680
Linear Actuating Cylinder Assembly Parts Kit

011115680
G34819: RNCC: 3 | RNVC: 2
BJI-G34819: RNCC: 5 | RNVC: 2

19 Apr 1981

3040-01-113-3104
Remote Control Lever

011133104
361-11116-501: RNCC: 3 | RNVC: 2

20 May 1981

3040-01-113-2516
Rigid Connecting Link

011132516
3532-1: RNCC: 3 | RNVC: 2
SR11841C1: RNCC: 3 | RNVC: 9

19 May 1981

3040-01-114-7721
Rigid Connecting Link

011147721
12299621: RNCC: 3 | RNVC: 2
10085856: RNCC: 6 | RNVC: 9

22 Jun 1981

3040-01-115-0902
Shaft Collar

011150902
NP5031003: RNCC: 3 | RNVC: 2
NP5031003: RNCC: 5 | RNVC: 9
NP5031003: RNCC: C | RNVC: 1

27 Jun 1981

3040-01-115-6758
Spur Gearshaft

011156758
409C119-1: RNCC: 3 | RNVC: 2
409C119-1: RNCC: 5 | RNVC: 9
10106764: RNCC: 6 | RNVC: 9
409C119: RNCC: D | RNVC: 9

11 Jul 1981

3040-01-116-1306
Straight Shaft

011161306
167C2179: RNCC: 3 | RNVC: 2
10106766: RNCC: 6 | RNVC: 9

21 Jul 1981

3040-01-116-1310
Shouldered Shaft

011161310
433712: RNCC: 3 | RNVC: 2
10106770: RNCC: 6 | RNVC: 9

21 Jul 1981

3040-01-117-1293
Right Hand Support Arm

011171293
12011828-2: RNCC: 3 | RNVC: 2
70751-02019-104: RNCC: 5 | RNVC: 9

14 Mar 2001

3040-01-117-3934
Shouldered Shaft Assembly

011173934
145H6606-1: RNCC: 3 | RNVC: 2
145H6606-1: RNCC: 7 | RNVC: 2

14 Aug 1981

3040-01-117-7349
Rigid Connecting Link

011177349
414C2520-3: RNCC: 3 | RNVC: 2
414C2520-3: RNCC: 5 | RNVC: 2

21 Aug 1981

3040-01-117-7360
Rigid Connecting Link

011177360
145C3340-9: RNCC: 3 | RNVC: 2

21 Aug 1981

3040-01-118-6096
Straight Shaft

011186096
60-500-0238-1: RNCC: 3 | RNVC: 2
01-435-0157-5 PIECE 240: RNCC: 5 | RNVC: 2
60-500-0238-1: RNCC: 5 | RNVC: 9
01-435-0157-5 PIECE 240: RNCC: D | RNVC: 9

6 Sep 1981

3040-01-118-4154
Piston Shaft

011184154
4051-9: RNCC: 3 | RNVC: 2
29KP203: RNCC: 5 | RNVC: 2
4051-9: RNCC: 5 | RNVC: 9
29KP203: RNCC: 5 | RNVC: 9

4 Sep 1981

3040-01-119-0732
Bevel Gearshaft

011190732
132D1705: RNCC: 3 | RNVC: 2
10106788: RNCC: 6 | RNVC: 9

16 Sep 1981

3040-01-119-9500
Control Cam

011199500
2640-809X24 PC 21: RNCC: 3 | RNVC: 2
845-4558776 ITEM 18: RNCC: 5 | RNVC: 2
2640-809-24 PIECE 21: RNCC: 5 | RNVC: 9
2642-820-57 PIECE 18: RNCC: 5 | RNVC: 9
2640-809-24: RNCC: D | RNVC: 9

8 Oct 1981

3040-01-121-1608
Linear Actuating Cylinder Head

011211608
13211E7875: RNCC: 3 | RNVC: 2

31 Oct 1981

3040-01-121-8674
Shouldered Shaft

011218674
5541859: RNCC: 3 | RNVC: 2

10 Nov 1981

3040-01-122-5201
Remote Control Lever

011225201
6838278: RNCC: 3 | RNVC: 2
6838278: RNCC: 5 | RNVC: 9

22 Nov 1981

3040-01-122-2944
Driv Shaft Assembly

011222944
13226E0344: RNCC: 1 | RNVC: 2
41A001W-0595-031: RNCC: 3 | RNVC: 2

19 Nov 1981

3040-01-123-2226
Counterbalance Weight

011232226
579-1046-01: RNCC: 3 | RNVC: 2
10163652: RNCC: 6 | RNVC: 9

8 Dec 1981

3040-01-123-2697
Rigid Connecting Link

011232697
70217-01031-048: RNCC: 3 | RNVC: 2
70217-01031-047: RNCC: E | RNVC: 8

10 Dec 1981

3040-01-123-5074
Cam

011235074
B-3600-E: RNCC: 3 | RNVC: 2
D-3600 ITEM 9: RNCC: 5 | RNVC: 2

13 Dec 1981

3040-01-126-6171
Linear Actuating Cylinder

011266171
65261-08068-101: RNCC: 3 | RNVC: 2

14 Feb 1982

3040-01-128-4669
Spur Gearshaft

011284669
2046362-1: RNCC: 3 | RNVC: 2
2046362-1: RNCC: 5 | RNVC: 9
10106847: RNCC: 6 | RNVC: 9
2046362: RNCC: D | RNVC: 9

21 Mar 1982

3040-01-128-9355
Rigid Connecting Link

011289355
960348-1: RNCC: 3 | RNVC: 2
SR11928A: RNCC: 5 | RNVC: 9
10130521: RNCC: 6 | RNVC: 9
960348: RNCC: D | RNVC: 9

27 Mar 1982

3040-01-124-3862
Linear Actuating Cylinder Piston

011243862
2793718-101: RNCC: 3 | RNVC: 2
2793718-101: RNCC: 3 | RNVC: 9
2793718: RNCC: D | RNVC: 9

1 Jan 1982

3040-01-124-6159
Mechanical Drive Housing

011246159
181981-2: RNCC: 3 | RNVC: 2

9 Jan 1982

3040-01-124-7795
Straight Shaft

011247795
2589698: RNCC: 3 | RNVC: 2

12 Jan 1982

3040-01-125-7325
Bevel Gearshaft

011257325
64351-11029-105: RNCC: 3 | RNVC: 2

1 Feb 1982

3040-01-125-7331
Spur Gearshaft

011257331
65391-11711-103: RNCC: 3 | RNVC: 2
65391-11711-102: RNCC: 5 | RNVC: 2

1 Feb 1982

3040-01-125-8358
Straight Shaft

011258358
65396-00017-101: RNCC: 3 | RNVC: 2

1 Feb 1982

3040-01-125-8848
Spur Gearshaft

011258848
64356-04014-101: RNCC: 3 | RNVC: 2

1 Feb 1982

3040-01-125-9180
Spur Gearshaft

011259180
65393-04014-101: RNCC: 3 | RNVC: 2

1 Feb 1982

3040-01-125-8926
Rigid Connecting Link

011258926
MBEU-66751: RNCC: 3 | RNVC: 2

1 Feb 1982

3040-01-126-1744
Brake Band And Lining

011261744
4674704-0002: RNCC: 3 | RNVC: 2
95-D-289-R: RNCC: 3 | RNVC: 2
520-4674704 ITEM 2: RNCC: D | RNVC: 9
520-4674704: RNCC: D | RNVC: 9

6 Feb 1982

3040-01-089-3085
Straight Shaft

010893085
162B8291: RNCC: 3 | RNVC: 2

30 Jan 1980

3040-01-088-3223
Remote Control Lever

010883223
70400-01610-042: RNCC: 3 | RNVC: 2
3040PL1950875: RNCC: 6 | RNVC: 9

11 Jan 1980

3040-01-086-3272
Spur Gearshaft

010863272
DAX12808: RNCC: 3 | RNVC: 2
12267963: RNCC: 3 | RNVC: 2

25 Nov 1979

3040-01-086-4179
Flexible Shaft Assembly Casing

010864179
5016 127: RNCC: 3 | RNVC: 2
NP 5016 127: RNCC: 5 | RNVC: 9
NP 5016 127: RNCC: C | RNVC: 1

28 Nov 1979

3040-01-088-7944
Mechanical Drive Housing

010887944
306734200: RNCC: 3 | RNVC: 2
3067342: RNCC: 5 | RNVC: 9
182858: RNCC: 5 | RNVC: 9

19 Jan 1980

3040-01-060-7236
Shouldered Shaft

010607236
GM7061: RNCC: 3 | RNVC: 2
L2903: RNCC: 5 | RNVC: 2
5905PL1646721: RNCC: 6 | RNVC: 9

29 May 1978

3040-01-063-5657
Rigid Connecting Link

010635657
12274450-1: RNCC: 3 | RNVC: 2
XM60214-1: RNCC: 5 | RNVC: 9

9 Aug 1978

3040-01-064-8863
Nonrotating Shaft Eye Bracket

010648863
A51084: RNCC: 3 | RNVC: 2

4 Sep 1978

3040-01-065-6136
Linear Actuating Cylinder Piston

010656136
12274438: RNCC: 3 | RNVC: 2
XM23132: RNCC: 5 | RNVC: 2

21 Sep 1978

3040-01-065-9133
Body Hub

010659133
12287333: RNCC: 3 | RNVC: 2
XM60292: RNCC: 5 | RNVC: 9
XM60292: RNCC: 5 | RNVC: 9
12274496: RNCC: 5 | RNVC: 9
3040010659133: RNCC: 6 | RNVC: 9

27 Sep 1978

3040-01-068-8580
Pawl

010688580
2362-S4: RNCC: 3 | RNVC: 2
292 050 J65: RNCC: 5 | RNVC: 9
459-218-030: RNCC: 5 | RNVC: 9
459-218-030: RNCC: 5 | RNVC: 9
200113ZPC325-38: RNCC: 5 | RNVC: 9
200113ZPC325-38: RNCC: 5 | RNVC: 9
292 050 J65: RNCC: C | RNVC: 1
292 050 J65: RNCC: C | RNVC: 1
200113Z: RNCC: D | RNVC: 9

5 Dec 1978

3040-01-069-4287
Nonrotating Shaft Eye Bracket

010694287
9D00647-1: RNCC: 3 | RNVC: 2
517049-1: RNCC: 5 | RNVC: 9

15 Dec 1978

3040-01-070-1225
Straight Shaft

010701225
16P1522-7: RNCC: 3 | RNVC: 2

3 Jan 1979

3040-01-070-3227
Mechanical Drive Housing

010703227
10888207: RNCC: 3 | RNVC: 2

10 Jan 1979

3040-01-070-9004
Shouldered Shaft

010709004
212601: RNCC: 3 | RNVC: 2
212601: RNCC: 5 | RNVC: 2
10050634: RNCC: 6 | RNVC: 9

24 Jan 1979

3040-01-072-8041
Shouldered Shaft

010728041
12283264: RNCC: 3 | RNVC: 2

4 Mar 1979

3040-01-073-0098
Shouldered Shaft

010730098
12267951: RNCC: 3 | RNVC: 2
DAX12077: RNCC: 5 | RNVC: 2

7 Mar 1979

3040-01-073-4339
Linear Actuating Cylinder Piston

010734339
12267111: RNCC: 3 | RNVC: 2
12267111: RNCC: 5 | RNVC: 2
1226711: RNCC: 5 | RNVC: 9
DAX11786: RNCC: 5 | RNVC: 9

15 Mar 1979

3040-01-073-9712
Hub Clamp

010739712
12287974: RNCC: 3 | RNVC: 2
12285297: RNCC: 5 | RNVC: 9

24 Mar 1979

3040-01-074-0670
Brake Shaft

010740670
8-52-95: RNCC: 3 | RNVC: 9
8-52T-07 ITEM 12: RNCC: 5 | RNVC: 9
8-52T07ITEM12: RNCC: 5 | RNVC: 9
8-52-95: RNCC: 5 | RNVC: 9

25 Mar 1979

3040-01-074-0602
Shouldered Shaft

010740602
11416-F-18B: RNCC: 3 | RNVC: 2
4X9H10X2: RNCC: 3 | RNVC: 9
PL-11156-F-18 ITEM 10: RNCC: 5 | RNVC: 2
PL-11156-F-18 ITEM10: RNCC: 5 | RNVC: 9
4X9H10X2: RNCC: 5 | RNVC: 9
F-4X9H10X2: RNCC: 5 | RNVC: 9

24 Mar 1979

3040-01-074-5987
Rigid Connecting Link

010745987
12265616: RNCC: 3 | RNVC: 2

4 Apr 1979

3040-01-075-9876
Starbo Bearing Shoe

010759876
400-4674852 ITEM 3: RNCC: 3 | RNVC: 2
4674852-0003: RNCC: 5 | RNVC: 2
400-4674852: RNCC: D | RNVC: 9

30 Apr 1979

3040-01-076-9293
Mechanical Drive Housing

010769293
12265806: RNCC: 3 | RNVC: 2
12265806: RNCC: 5 | RNVC: 9

16 May 1979

3040-01-077-4385
Rigid Connecting Link

010774385
4500-213: RNCC: 3 | RNVC: 2
68B618000-213: RNCC: 7 | RNVC: 2
4500: RNCC: D | RNVC: 9

23 May 1979

3040-01-077-5728
Remote Control Lever

010775728
LEVER #AC: RNCC: 3 | RNVC: 2
3224079 ITEM 48: RNCC: 5 | RNVC: 9
3017129: RNCC: 5 | RNVC: 9

26 May 1979

3040-01-079-1799
Straight Shaft

010791799
3801433: RNCC: 3 | RNVC: 2
MA280 21 000: RNCC: 3 | RNVC: 2
140297: RNCC: 5 | RNVC: 9

28 Jun 1979

3040-01-079-1795
Rigid Connecting Link

010791795
11579667: RNCC: 3 | RNVC: 2

28 Jun 1979

3040-01-079-4621
Flexible Drive Shaft

010794621
12267429: RNCC: 1 | RNVC: 2
23010682: RNCC: 3 | RNVC: 2
DAX12603: RNCC: 5 | RNVC: 2

7 Jul 1979

3040-01-081-2779
Rigid Connecting Link

010812779
70305-02119-042: RNCC: 3 | RNVC: 2

11 Aug 1979

3040-01-084-5726
Motor Pinion

010845726
23-03149-003: RNCC: 3 | RNVC: 9

22 Oct 1979

3040-01-086-1448
Mechanical Drive Housing

010861448
204244: RNCC: 3 | RNVC: 2
MA207-21118: RNCC: 5 | RNVC: 2

21 Nov 1979

3040-01-086-1449
Shaft Collar

010861449
3006343: RNCC: 3 | RNVC: 2
MA207-21389: RNCC: 5 | RNVC: 2

21 Nov 1979

3040-01-089-7772
Remote Control Lever

010897772
12524218: RNCC: 3 | RNVC: 2
465-4218: RNCC: 5 | RNVC: 2
465-4218: RNCC: 5 | RNVC: 9

7 Feb 1980

3040-01-090-9341
Rigid Connecting Link

010909341
12255972: RNCC: 3 | RNVC: 2

28 Feb 1980

3040-01-091-3842
Rigid Connecting Link

010913842
70400-02252: RNCC: 1 | RNVC: 2
70400-02252-123: RNCC: 3 | RNVC: 2
2004-1: RNCC: 5 | RNVC: 2
AS4-1000-123: RNCC: 5 | RNVC: 9
1100090-123: RNCC: 5 | RNVC: 9
SR11722A: RNCC: 5 | RNVC: 9
3040PL1938754: RNCC: 6 | RNVC: 9

7 Mar 1980

3040-01-091-3840
Rigid Connecting Link

010913840
70400-02252-121: RNCC: 1 | RNVC: 2
2001-1: RNCC: 3 | RNVC: 2
SR11720A: RNCC: 3 | RNVC: 2
1100060-121: RNCC: 5 | RNVC: 2
3040PL1967915: RNCC: 6 | RNVC: 9

7 Mar 1980

3040-01-091-6841
Shouldered Shaft

010916841
712184: RNCC: 3 | RNVC: 2

11 Mar 1980

3040-01-092-7991
Accumulator Cap

010927991
N1449: RNCC: 3 | RNVC: 2
1810-1290 ITEM 2: RNCC: 5 | RNVC: 2
1810-1290: RNCC: D | RNVC: 9

4 Apr 1980

3040-01-093-7364
Manual Control Lever

010937364
19-97-0150: RNCC: 3 | RNVC: 2
2641-809-40 ASSEMBLY A: RNCC: 3 | RNVC: 2
845-4558740 ITEM 64: RNCC: 5 | RNVC: 2
2642-785-05: RNCC: D | RNVC: 9
845-4558740: RNCC: D | RNVC: 9

23 Apr 1980

3040-01-094-9559
Rigid Connecting Link

010949559
12287446: RNCC: 1 | RNVC: 2
12287446: RNCC: 3 | RNVC: 2

20 May 1980

3040-01-095-8789
Nonrotating Shaft Eye Bracket

010958789
12296788: RNCC: 3 | RNVC: 2

9 Jun 1980

3040-01-096-5546
Rigid Connecting Link

010965546
70400-01250-042: RNCC: 1 | RNVC: 2
2014-1: RNCC: 3 | RNVC: 2
70400-01250-042: RNCC: 5 | RNVC: 2
70400-01250-042: RNCC: 5 | RNVC: 2
SR10985A: RNCC: 5 | RNVC: 2
70400-01250-042: RNCC: 5 | RNVC: 9
70400-0125: RNCC: 5 | RNVC: 9
70400-01250-042: RNCC: 5 | RNVC: 9
1100010-042: RNCC: 5 | RNVC: 9
70400-01250-042: RNCC: 5 | RNVC: 9

24 Jun 1980

3040-01-096-9223
Bevel Gearshaft

010969223
4645272-0011: RNCC: 3 | RNVC: 2
123-4645272 ITEM 11: RNCC: 5 | RNVC: 2
87547-1502 ITEM 11: RNCC: 5 | RNVC: 2
4845272-0011: RNCC: 5 | RNVC: 9
4645272-011: RNCC: 5 | RNVC: 9
87547-1502: RNCC: D | RNVC: 9
123-4645272: RNCC: D | RNVC: 9

30 Jun 1980

3040-01-097-3200
Rigid Connecting Link

010973200
12298748: RNCC: 3 | RNVC: 2

10 Jul 1980

3040-01-098-2315
Multiple Gears Gearshaft

010982315
12292366: RNCC: 3 | RNVC: 2

28 Jul 1980

3040-01-098-2496
Spur Gearshaft

010982496
26800156: RNCC: 3 | RNVC: 9
9240-003-56: RNCC: C | RNVC: 1

29 Jul 1980

3040-01-098-2902
Shaft Retaining Plate

010982902
1362080G1: RNCC: 3 | RNVC: 9
1362080G1: RNCC: 5 | RNVC: 2
125-1-5: RNCC: C | RNVC: 1

29 Jul 1980

3040-01-101-5631
Gear Shaft

011015631
8348-25: RNCC: 3 | RNVC: 2

3 Oct 1980

3040-01-101-1576
Shouldered Shaft

011011576
RE-B102131: RNCC: 3 | RNVC: 2
ASC1539000: RNCC: 5 | RNVC: 9

20 Sep 1980

3040-01-102-6080
Shouldered Shaft

011026080
70209-01006-102: RNCC: 3 | RNVC: 2
70209-01006-101: RNCC: 5 | RNVC: 9
3040PL2093190: RNCC: 6 | RNVC: 9
70209-01006: RNCC: D | RNVC: 9

23 Oct 1980

3040-01-102-8203
Rigid Connecting Link

011028203
12280575-1: RNCC: 3 | RNVC: 2
3040011028203: RNCC: 6 | RNVC: 9
12280575: RNCC: D | RNVC: 9

29 Oct 1980

3040-01-103-3409
Linear Actuating Cylinder Assembly

011033409
RW-53: RNCC: 3 | RNVC: 2
6845-3336-47: RNCC: 5 | RNVC: 9
RW-53: RNCC: 5 | RNVC: 9
6845-3336: RNCC: D | RNVC: 9

12 Nov 1980

3040-01-104-6115
Shouldered Shaft

011046115
8067-79: RNCC: 3 | RNVC: 2
8067-79: RNCC: 5 | RNVC: 9

6 Dec 1980

3040-01-106-7810
Nonrotating Shaft Eye Bracket

011067810
12297750: RNCC: 3 | RNVC: 2

25 Jan 1981

3040-01-108-5036
Control Cam

011085036
12299569: RNCC: 3 | RNVC: 2
10085828: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-108-5332
Remote Control Lever

011085332
12299123: RNCC: 3 | RNVC: 2
12299123: RNCC: 5 | RNVC: 2
10085833: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-108-5339
Remote Control Lever

011085339
12299140: RNCC: 3 | RNVC: 2
12299140: RNCC: 5 | RNVC: 9
10085839: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-108-7030
Shouldered Shaft

011087030
01-435-0157-5PIECE 136: RNCC: 3 | RNVC: 2
60-305-0006-2: RNCC: 5 | RNVC: 2
01-435-0157-5PIECE 136: RNCC: 5 | RNVC: 9
60-305-0006-2: RNCC: 5 | RNVC: 9

4 Mar 1981

3040-01-109-2046
Straight Shaft

011092046
11628313: RNCC: 3 | RNVC: 2
11628313: RNCC: 5 | RNVC: 2
10395809: RNCC: 6 | RNVC: 9

12 Mar 1981

3040-01-109-7915
Linear Actuating Cylinder Cap

011097915
28920: RNCC: 3 | RNVC: 2
895-28365 ITEM 7: RNCC: 5 | RNVC: 2
895-28365: RNCC: D | RNVC: 9

21 Mar 1981

3040-01-110-3947
Rigid Connecting Link

011103947
2600129-2: RNCC: 3 | RNVC: 2
2600129-2: RNCC: 5 | RNVC: 2

30 Mar 1981

3040-01-111-1557
Manual Control Lever

011111557
18-2300-1: RNCC: 3 | RNVC: 2
18-1500-2: RNCC: 5 | RNVC: 2
61078-2: RNCC: 5 | RNVC: 2
3040PL0809315: RNCC: 6 | RNVC: 9
16VP043-100: RNCC: D | RNVC: 9

12 Apr 1981

3040-01-112-1922
Push-Pull Control Assembly

011121922
21H120: RNCC: 3 | RNVC: 2
B48701-0216.0 WITH B42978-08A: RNCC: 5 | RNVC: 2
B48701-0216.0 WITH B42978-08A: RNCC: 5 | RNVC: 9
21H120-A: RNCC: D | RNVC: 9

29 Apr 1981

3040-01-113-4587
Worm Shaft

011134587
K472: RNCC: 3 | RNVC: 9
TU23: RNCC: 5 | RNVC: 9

27 May 1981

3040-01-113-9706
Ball Joint

011139706
580520-1: RNCC: 3 | RNVC: 2
580520-1: RNCC: 5 | RNVC: 2
580520-1: RNCC: 5 | RNVC: 9

7 Jun 1981

3040-01-114-0181
Rigid Connecting Link

011140181
810-2178000-6 ITEM 20: RNCC: 3 | RNVC: 2
810-2178000-1 ITEM 98: RNCC: 5 | RNVC: 2
810-2178000: RNCC: D | RNVC: 9

7 Jun 1981

3040-01-112-6829
Shouldered Shaft

011126829
3365777-1: RNCC: 3 | RNVC: 2
3365777-1: RNCC: 5 | RNVC: 9
3365777-1: RNCC: 5 | RNVC: 9

8 May 1981

3040-01-114-7720
Rigid Connecting Link

011147720
12299311: RNCC: 3 | RNVC: 2
10085855: RNCC: 6 | RNVC: 9

22 Jun 1981

3040-01-114-8516
Spline Adapter

011148516
21C4382G01: RNCC: 3 | RNVC: 2

24 Jun 1981

3040-01-114-7246
Control Cam

011147246
P1-9: RNCC: 3 | RNVC: 2
ETS-A1-9: RNCC: 3 | RNVC: 2
JD-3P: RNCC: 5 | RNVC: 9
ETS-A1-9: RNCC: 5 | RNVC: 9

21 Jun 1981

3040-01-115-5990
Straight Shaft

011155990
A6-32: RNCC: 3 | RNVC: 2
933C055431-2: RNCC: 5 | RNVC: 9
055431-2: RNCC: 7 | RNVC: 2

10 Jul 1981

3040-01-116-1552
Mechanical Drive Housing

011161552
209F385: RNCC: 3 | RNVC: 2
10106773: RNCC: 6 | RNVC: 9

21 Jul 1981

3040-01-116-3300
Linear Actuating Cylinder Assembly

011163300
A-627: RNCC: 3 | RNVC: 2

25 Jul 1981

3040-01-117-1292
Outboard Fitting

011171292
12011828-1: RNCC: 3 | RNVC: 2
70751-02019-103: RNCC: 5 | RNVC: 9

9 Aug 1981

3040-01-117-1362
Shouldered Shaft

011171362
114S1863-7: RNCC: 3 | RNVC: 2

9 Aug 1981

3040-01-117-0311
Spur Gearshaft

011170311
12524098: RNCC: 3 | RNVC: 2
465-4098: RNCC: 5 | RNVC: 1
COH-62812: RNCC: 5 | RNVC: 2

7 Aug 1981

3040-01-117-4428
Brake Disc

011174428
AS-134522: RNCC: 3 | RNVC: 2
AS-134522: RNCC: 5 | RNVC: 9
AS-134522: RNCC: 5 | RNVC: 9

11 Mar 2003

3040-01-117-6897
Counterbalance Weight

011176897
3556943-4: RNCC: 3 | RNVC: 2
3556943-4: RNCC: 5 | RNVC: 2
3556943: RNCC: D | RNVC: 9

20 Aug 1981

3040-01-117-7359
Rigid Connecting Link

011177359
145C3340-8: RNCC: 3 | RNVC: 2
145C3340-8: RNCC: 5 | RNVC: 2

21 Aug 1981

3040-01-119-0733
Bevel Gearshaft

011190733
132D1959: RNCC: 3 | RNVC: 2
10106789: RNCC: 6 | RNVC: 9

16 Sep 1981

3040-01-119-0603
Shouldered Shaft

011190603
3168810-1: RNCC: 3 | RNVC: 2
3168810-1: RNCC: 5 | RNVC: 9
10130533: RNCC: 6 | RNVC: 9
3168810: RNCC: D | RNVC: 9

16 Sep 1981

3040-01-119-0730
Control Cam

011190730
409B126: RNCC: 3 | RNVC: 2
409B126: RNCC: 5 | RNVC: 9
409B126: RNCC: 5 | RNVC: 9
10130542: RNCC: 6 | RNVC: 9

16 Sep 1981

3040-01-119-5567
Rigid Connecting Link

011195567
7054M25G01: RNCC: 3 | RNVC: 2

25 Sep 1981

3040-01-120-5402
Linear Actuating Cylinder Assembly

011205402
RD2510: RNCC: 3 | RNVC: 2
164-7066805-142: RNCC: C | RNVC: 1
H547-2003-142: RNCC: C | RNVC: 1

21 Oct 1981

3040-01-121-1550
Shaft Retaining Plate

011211550
13211E3028: RNCC: 3 | RNVC: 2

31 Oct 1981

3040-01-121-7372
Brake Disc

011217372
3030463: RNCC: 3 | RNVC: 2

7 Nov 1981

3040-01-122-2945
Flange Drive Shaft Adapter

011222945
13226E0153: RNCC: 3 | RNVC: 2
30-42-01: RNCC: 5 | RNVC: 2

19 Nov 1981

3040-01-121-6084
Shaft

011216084
5138959: RNCC: 3 | RNVC: 2
3040PL0945181: RNCC: 6 | RNVC: 9

6 Nov 1981

3040-01-122-3364
Straight Shaft

011223364
MG0-3005-204: RNCC: 3 | RNVC: 2
MG0-3005-204: RNCC: 5 | RNVC: 9
MG0-3-N PIECE 4: RNCC: 5 | RNVC: 9

19 Nov 1981

3040-01-122-7907
Counterbalance Weight

011227907
2663071: RNCC: 3 | RNVC: 2
10158402: RNCC: 6 | RNVC: 9

28 Nov 1981

3040-01-123-0306
Pneumatic Actuator Cylinder Housing

011230306
28756: RNCC: 3 | RNVC: 2
13-28335 ITEM 1: RNCC: 5 | RNVC: 2
13-28335: RNCC: D | RNVC: 9

4 Dec 1981

3040-01-123-2698
Straight Shaft

011232698
525C854H01: RNCC: 3 | RNVC: 2

10 Dec 1981

3040-01-122-9935
Linear Actuating Cylinder Head

011229935
28760: RNCC: 3 | RNVC: 2
13-28335 ITEM 5: RNCC: 5 | RNVC: 2
13-28335: RNCC: D | RNVC: 9

3 Dec 1981

3040-01-124-6810
Rigid Connecting Link

011246810
7-0570-2: RNCC: 3 | RNVC: 2
7-0570-1: RNCC: 5 | RNVC: 9
10153948: RNCC: 6 | RNVC: 9

10 Jan 1982

3040-01-125-7328
Spur Gearshaft

011257328
65395-07005-101: RNCC: 3 | RNVC: 2

1 Feb 1982

3040-01-125-8469
Remote Control Lever

011258469
1534AS215: RNCC: 3 | RNVC: 2
1534AS215: RNCC: 5 | RNVC: 2
1534AS215: RNCC: 5 | RNVC: 9
1534AS215: RNCC: 5 | RNVC: 9
1534AS215: RNCC: 5 | RNVC: 9
D013457-1: RNCC: 5 | RNVC: 9
1534AS215: RNCC: 5 | RNVC: 9
D013457-1: RNCC: C | RNVC: 1

1 Feb 1982

3040-01-125-8918
Bell Crank

011258918
74A615606-1005: RNCC: 3 | RNVC: 2
74A615606-1003: RNCC: 5 | RNVC: 2
74A615606-1003: RNCC: 5 | RNVC: 9
74A615606-1001: RNCC: 5 | RNVC: 9
10130529: RNCC: 6 | RNVC: 9

1 Feb 1982

3040-01-126-0231
Straight Shaft

011260231
87832-1609 ITEM 7: RNCC: 3 | RNVC: 2
709-4684880 ITEM 7: RNCC: 5 | RNVC: 2
87832-1609: RNCC: D | RNVC: 9
709-4684880: RNCC: D | RNVC: 9

5 Feb 1982

3040-01-126-4037
Magnigication Shaft

011264037
12293554: RNCC: 3 | RNVC: 2
12293554: RNCC: 5 | RNVC: 9
12293330: RNCC: 5 | RNVC: 9
12293318: RNCC: 5 | RNVC: 9

11 Feb 1982

3040-01-127-1445
Straight Shaft

011271445
31049-1: RNCC: 3 | RNVC: 2

24 Feb 1982

3040-01-127-1466
Helical Gearshaft

011271466
1H-C18FS-19-13833-1REF14: RNCC: 3 | RNVC: 9
A1-378X0VH: RNCC: 5 | RNVC: 9
200136T PIECE 327-12: RNCC: 5 | RNVC: 9
228303BV12: RNCC: 5 | RNVC: 9
228303BV12: RNCC: C | RNVC: 1
PL200136T: RNCC: D | RNVC: 9

24 Feb 1982

3040-01-127-7813
Hub Clamp

011277813
11590891: RNCC: 3 | RNVC: 2

7 Mar 1982

3040-01-128-5874
Spur Gearshaft

011285874
2771554-101: RNCC: 3 | RNVC: 2
2771554-101: RNCC: 5 | RNVC: 9
10106849: RNCC: 6 | RNVC: 9
2771554: RNCC: D | RNVC: 9

25 Mar 1982

3040-01-128-5901
Rigid Connecting Link

011285901
74A460607-1003: RNCC: 3 | RNVC: 2
10106853: RNCC: 6 | RNVC: 9
74A460607: RNCC: D | RNVC: 9

25 Mar 1982

3040-01-129-3558
Straight Shaft

011293558
65311-03015-101: RNCC: 3 | RNVC: 2

5 Apr 1982

3040-01-061-0608
Shouldered Shaft

010610608
87553-5007 REVA PC10: RNCC: 3 | RNVC: 2
704-4674165 PC 10: RNCC: 5 | RNVC: 2
704-4674165 ITEM 10: RNCC: 5 | RNVC: 9
704-4674165 ITE: RNCC: C | RNVC: 1
704-4674165: RNCC: D | RNVC: 9

10 Jun 1978

3040-01-063-2437
Extension Shaft

010632437
384-1101-00: RNCC: 3 | RNVC: 2

31 Jul 1978

3040-01-063-9307
Counterbalance Weight

010639307
579-1024-01: RNCC: 3 | RNVC: 2

14 Aug 1978

3040-01-063-9308
Counterbalance Weight

010639308
579-1024-02: RNCC: 3 | RNVC: 2

14 Aug 1978

3040-01-063-9312
Counterbalance Weight

010639312
579-1024-06: RNCC: 3 | RNVC: 2

14 Aug 1978

3040-01-064-0375
Shaft Collar

010640375
31059-3: RNCC: 3 | RNVC: 2

16 Aug 1978

3040-01-066-3262
Straight Shaft

010663262
504811-1: RNCC: 3 | RNVC: 2

6 Oct 1978

3040-01-065-6141
Mechanical Drive Housing

010656141
12274546: RNCC: 3 | RNVC: 2
XM68315: RNCC: 5 | RNVC: 2
3040010656141: RNCC: 6 | RNVC: 9

21 Sep 1978

3040-01-067-3855
Brake Drum

010673855
507221: RNCC: 3 | RNVC: 2
507221: RNCC: 5 | RNVC: 9
507221: RNCC: 5 | RNVC: 9

29 Oct 1978

3040-01-068-9690
Plate

010689690
1M1440: RNCC: 3 | RNVC: 2

7 Dec 1978

3040-01-072-4387
Gear Shaft

010724387
42305D211: RNCC: 3 | RNVC: 2
42305-211: RNCC: 3 | RNVC: 9
42305D211: RNCC: 5 | RNVC: 9

1 Mar 1979

3040-01-073-8003
Shouldered Shaft

010738003
12271513: RNCC: 3 | RNVC: 2
3-100-151-02: RNCC: 5 | RNVC: 2
3-100-151-03: RNCC: 5 | RNVC: 2
12286193: RNCC: 5 | RNVC: 9

21 Mar 1979

3040-01-073-9855
Spur Gearshaft

010739855
12274152: RNCC: 3 | RNVC: 2

24 Mar 1979

3040-01-073-9854
Spur Gearshaft

010739854
12288361: RNCC: 3 | RNVC: 2

24 Mar 1979

3040-01-074-6271
Straight Shaft

010746271
8-52-94: RNCC: 3 | RNVC: 9
8-52T07ITEM11: RNCC: 5 | RNVC: 9
8-52-94: RNCC: 5 | RNVC: 9
8-52T-07: RNCC: D | RNVC: 9

6 Apr 1979

3040-01-075-6976
Shouldered Shaft

010756976
657191: RNCC: 3 | RNVC: 2

25 Apr 1979

3040-01-074-9648
Spur Gearshaft

010749648
12267946: RNCC: 3 | RNVC: 2
DAX11441: RNCC: 5 | RNVC: 2

11 Apr 1979

3040-01-076-1757
Shouldered Shaft

010761757
366655: RNCC: 3 | RNVC: 9
9987-961PC222: RNCC: 5 | RNVC: 2
36610-67: RNCC: 5 | RNVC: 2
366655: RNCC: C | RNVC: 1
9987-961: RNCC: D | RNVC: 9

2 May 1979

3040-01-076-3356
Cradle Collar

010763356
68D260080-2197: RNCC: 3 | RNVC: 2
68D260080-2197: RNCC: 5 | RNVC: 2
68D260080: RNCC: D | RNVC: 9

4 May 1979

3040-01-077-1691
Mechanical Drive Housing

010771691
12267243: RNCC: 1 | RNVC: 2
23010670: RNCC: 3 | RNVC: 2

19 May 1979

3040-01-077-2881
Shouldered Shaft

010772881
3016974: RNCC: 3 | RNVC: 2
3224079 ITEM 11: RNCC: 5 | RNVC: 2

20 May 1979

3040-01-077-4150
Detent Plate

010774150
162B8748: RNCC: 3 | RNVC: 2

23 May 1979

3040-01-077-5737
Control Cam

010775737
3224143: RNCC: 3 | RNVC: 2
3224073 ITEM 25: RNCC: 5 | RNVC: 2

26 May 1979

3040-01-079-0449
Shaft Collar

010790449
3017252: RNCC: 3 | RNVC: 2
3224079 ITEM 28: RNCC: 5 | RNVC: 2

25 Jun 1979

3040-01-082-0685
Remote Control Lever

010820685
70302-02147-041: RNCC: 3 | RNVC: 2

25 Aug 1979

3040-01-083-9262
Shouldered Shaft

010839262
2775555-101: RNCC: 3 | RNVC: 2
2775555-101: RNCC: 3 | RNVC: 9

4 Oct 1979

3040-01-084-0464
Rotor Assembl Shaft

010840464
5142412: RNCC: 3 | RNVC: 2
1DD993: RNCC: 5 | RNVC: 2
019-00001-208: RNCC: 5 | RNVC: 2
1DD993: RNCC: 5 | RNVC: 9

7 Oct 1979

3040-01-083-0922
Mechanical Drive Housing

010830922
23016886: RNCC: 3 | RNVC: 2
2AX336: RNCC: 5 | RNVC: 2
6881745: RNCC: 5 | RNVC: 9
2AX336: RNCC: 5 | RNVC: 9
23016886: RNCC: 5 | RNVC: 9

15 Sep 1979

3040-01-086-0822
Straight Shaft

010860822
NP3231000: RNCC: 3 | RNVC: 2
NP3231000: RNCC: 5 | RNVC: 9
NP3231000: RNCC: C | RNVC: 1

20 Nov 1979

3040-01-087-6309
Push-Pull Control Assembly

010876309
21633-520: RNCC: 3 | RNVC: 2

21 Dec 1979

3040-01-088-3326
Shouldered Shaft

010883326
20362-1050: RNCC: 3 | RNVC: 2
20363-004 FIND 15: RNCC: D | RNVC: 9

11 Jan 1980

3040-01-088-8756
Bell Crank

010888756
1128CM42002-3: RNCC: 3 | RNVC: 2
1128CM42002-3: RNCC: 5 | RNVC: 9

22 Jan 1980

3040-01-089-7789
Straight Shaft

010897789
12524302: RNCC: 3 | RNVC: 2
1005-002744: RNCC: 5 | RNVC: 2
1270000051: RNCC: 5 | RNVC: 2
2 0028-132: RNCC: 5 | RNVC: 2
2 0028-132: RNCC: 5 | RNVC: 9
10054059: RNCC: 6 | RNVC: 9

7 Feb 1980

3040-01-089-7787
Shouldered Shaft

010897787
12524312: RNCC: 3 | RNVC: 2

7 Feb 1980

3040-01-089-7774
Pawl

010897774
12524381: RNCC: 3 | RNVC: 2
465-8381: RNCC: 5 | RNVC: 2
465-8381: RNCC: 5 | RNVC: 9

7 Feb 1980

3040-01-092-2080
Rigid Connecting Link

010922080
70400-01250-049: RNCC: 3 | RNVC: 2
2012-7: RNCC: 3 | RNVC: 2
1100020-049: RNCC: 5 | RNVC: 2
AS4-1030-049: RNCC: 5 | RNVC: 9
70400-01250-049: RNCC: 5 | RNVC: 9
SR10992A: RNCC: 5 | RNVC: 9
3040PL1961924: RNCC: 6 | RNVC: 9

21 Mar 1980

3040-01-092-7632
Flexible Core End Fitting

010927632
5073D197-1: RNCC: 3 | RNVC: 2

2 Apr 1980

3040-01-093-1793
Straight Shaft

010931793
94152: RNCC: 3 | RNVC: 2

22 Nov 1990

3040-01-092-6895
Rigid Connecting Link

010926895
70400-01606-041: RNCC: 3 | RNVC: 2
3040PL1954209: RNCC: 6 | RNVC: 9

31 Mar 1980

3040-01-095-1024
Spur Gearshaft

010951024
12292408: RNCC: 3 | RNVC: 2

21 May 1980

3040-01-096-3569
Rigid Connecting Link

010963569
1664C02H02: RNCC: 3 | RNVC: 2
1387F91P06: RNCC: 5 | RNVC: 2

18 Jun 1980

3040-01-098-8949
Shaft Retaining Plate

010988949
16103544: RNCC: 3 | RNVC: 2
16103544: RNCC: 3 | RNVC: 9
16302598PIECE47: RNCC: 5 | RNVC: 2
16302598PIECE47: RNCC: 5 | RNVC: 9

9 Aug 1980

3040-01-098-8957
Hand Control Shaft

010988957
16200513: RNCC: 3 | RNVC: 2
16200513: RNCC: 3 | RNVC: 9
16200513 REV 6: RNCC: D | RNVC: 9

9 Aug 1980

3040-01-098-9443
Linear Actuating Cylinder Assembly Parts Kit

010989443
9-752-100161: RNCC: 3 | RNVC: 9
9-752-100161: RNCC: 5 | RNVC: 2

9 Aug 1980

3040-01-099-8473
Helical Gearshaft

010998473
12292362: RNCC: 3 | RNVC: 2

24 Aug 1980

3040-01-100-4947
Shouldered Shaft

011004947
12009053: RNCC: 3 | RNVC: 2

7 Sep 1980

3040-01-101-9220
Rigid Connecting Link

011019220
20-020-004: RNCC: 3 | RNVC: 2
20-020-002: RNCC: 5 | RNVC: 9

9 Oct 1980

3040-01-102-3470
Nonrotating Shaft Eye Bracket

011023470
12285760-1: RNCC: 3 | RNVC: 2
3040011023470: RNCC: 6 | RNVC: 9

18 Oct 1980

3040-01-105-1470
Gearshaft Assembly

011051470
3500441-4: RNCC: 3 | RNVC: 2
3500441-4: RNCC: 5 | RNVC: 9

18 Dec 1980

3040-01-106-3323
Straight Shaft

011063323
13028073: RNCC: 3 | RNVC: 2
10085824: RNCC: 6 | RNVC: 9

16 Jan 1981

3040-01-107-8172
Bellcrank Fitting

011078172
9-64334-6: RNCC: 3 | RNVC: 2

13 Feb 1981

3040-01-109-0132
Shaft

011090132
791-0933-001: RNCC: 3 | RNVC: 2

9 Mar 1981

3040-01-109-2059
Shouldered Shaft

011092059
11628692: RNCC: 3 | RNVC: 2
11628692: RNCC: 5 | RNVC: 2

12 Mar 1981

3040-01-109-4188
Accumulator Cap

011094188
28354: RNCC: 3 | RNVC: 2
70-28490 ITEM 4: RNCC: 5 | RNVC: 2
70-28490: RNCC: D | RNVC: 9

14 Mar 1981

3040-01-109-4568
Remote Control Lever

011094568
11629607: RNCC: 3 | RNVC: 2
11629607: RNCC: 5 | RNVC: 2

15 Mar 1981

3040-01-110-3981
Bell Crank Support

011103981
12297909: RNCC: 3 | RNVC: 2

31 Mar 1981

3040-01-110-5566
Rigid Connecting Link

011105566
3365692-1: RNCC: 3 | RNVC: 2
3365692-1: RNCC: 5 | RNVC: 2
3365692-1: RNCC: 5 | RNVC: 9
3365692-1: RNCC: 5 | RNVC: 9

2 Apr 1981

3040-01-109-1770
Rigid Connecting Link

011091770
70400-01614-043: RNCC: 3 | RNVC: 2
3040PL1941632: RNCC: 6 | RNVC: 9
70400-01614: RNCC: D | RNVC: 9

12 Mar 1981

3040-01-111-5681
Linear Actuating Cylinder Assembly Parts Kit

011115681
G35378: RNCC: 3 | RNVC: 2

19 Apr 1981

3040-01-111-5851
Bell Crank

011115851
87749-3901 ITEM 4: RNCC: 3 | RNVC: 2
206-4775633 ITEM 4: RNCC: 5 | RNVC: 2
206-4775633: RNCC: D | RNVC: 9
87749-3901: RNCC: D | RNVC: 9

19 Apr 1981

3040-01-112-8254
Remote Control Lever

011128254
12292377: RNCC: 3 | RNVC: 2
12292423: RNCC: 5 | RNVC: 9

10 May 1981

3040-01-113-6152
Control Cam

011136152
74A480807-2003: RNCC: 3 | RNVC: 2
16143: RNCC: 5 | RNVC: 2
74A480807-2003: RNCC: 5 | RNVC: 2
74A480807-2003: RNCC: 5 | RNVC: 9
10106759: RNCC: 6 | RNVC: 9

30 May 1981

3040-01-114-4067
Rigid Connecting Link

011144067
2600689: RNCC: 3 | RNVC: 2

16 Jun 1981

3040-01-115-2386
Shouldered Shaft

011152386
16702542: RNCC: 3 | RNVC: 2
16702542: RNCC: 3 | RNVC: 9

1 Jul 1981

3040-01-116-3003
Shouldered Shaft

011163003
70309-01004-102: RNCC: 3 | RNVC: 2

24 Jul 1981

3040-01-116-2956
Push-Pull Control Assembly

011162956
S406-1: RNCC: 3 | RNVC: 2
S406: RNCC: 3 | RNVC: 2
S406-1: RNCC: 5 | RNVC: 2
70400-01607-109: RNCC: 5 | RNVC: 2
70400-01607-112: RNCC: 5 | RNVC: 9
3040PL1937561: RNCC: 6 | RNVC: 9
70400-01607: RNCC: D | RNVC: 9

24 Jul 1981

3040-01-116-7078
Shaft Retaining Plate

011167078
145R3131-5: RNCC: 3 | RNVC: 2

1 Aug 1981

3040-01-117-1358
Remote Control Lever

011171358
145H7326-5: RNCC: 3 | RNVC: 2
145H7326-5: RNCC: 5 | RNVC: 2

9 Aug 1981

3040-01-117-1224
Shouldered Shaft

011171224
70400-02108-049: RNCC: 3 | RNVC: 2
3040PL1941285: RNCC: 6 | RNVC: 9

9 Aug 1981

3040-01-117-7354
Rigid Connecting Link

011177354
145C2013-4: RNCC: 3 | RNVC: 2

21 Aug 1981

3040-01-117-7350
Rigid Connecting Link

011177350
414C2520-4: RNCC: 3 | RNVC: 2

21 Aug 1981

3040-01-117-7369
Rigid Connecting Link

011177369
145C1415-1: RNCC: 3 | RNVC: 2
145C1415-1: RNCC: 5 | RNVC: 2

21 Aug 1981

3040-01-118-4433
Shouldered Shaft

011184433
20428-1210: RNCC: 3 | RNVC: 2
20428-001 FIND 36: RNCC: 5 | RNVC: 9
20428-001: RNCC: D | RNVC: 9

4 Sep 1981

3040-01-118-6179
Bevel Gearshaft

011186179
9182M13G04: RNCC: 3 | RNVC: 2
9182M13G04: RNCC: 5 | RNVC: 2
9182M13G04: RNCC: 5 | RNVC: 2
9182M13G03: RNCC: 5 | RNVC: 9

6 Sep 1981

3040-01-118-9389
Spur Gearshaft

011189389
132D1711: RNCC: 3 | RNVC: 2
132D1711: RNCC: 5 | RNVC: 9
10106782: RNCC: 6 | RNVC: 9

14 Sep 1981

3040-01-119-2280
Spur Gearshaft

011192280
6035-0027-01: RNCC: 3 | RNVC: 2
10106793: RNCC: 6 | RNVC: 9
6035-0027-01: RNCC: C | RNVC: 1
6035-0027: RNCC: D | RNVC: 9

19 Sep 1981

3040-01-120-8548
Shouldered Shaft

011208548
L116350 AND 131-62: RNCC: 3 | RNVC: 2
L74168: RNCC: 5 | RNVC: 9

24 Oct 1981

3040-01-120-9569
Push-Pull Control Assembly

011209569
1034-B241: RNCC: 3 | RNVC: 2
D5000-545-04 ITEM 29: RNCC: 5 | RNVC: 9
D5540-545-01: RNCC: 5 | RNVC: 9

28 Oct 1981

3040-01-121-1222
Rigid Connecting Link

011211222
12291352: RNCC: 3 | RNVC: 2

31 Oct 1981

3040-01-121-1551
Shaft Retaining Plate

011211551
13211E3029: RNCC: 3 | RNVC: 2

31 Oct 1981

3040-01-121-1554
Shaft Retaining Plate

011211554
13211E3146: RNCC: 3 | RNVC: 2

31 Oct 1981

3040-01-121-2115
Remote Control Lever

011212115
11672342: RNCC: 3 | RNVC: 2

1 Nov 1981

3040-01-123-5080
Linear Actuating Cylinder Cap

011235080
28628: RNCC: 3 | RNVC: 2
1270-28625 ITEM 5: RNCC: 5 | RNVC: 2
1270-28625: RNCC: D | RNVC: 9

13 Dec 1981

3040-01-123-8708
Shaft

011238708
5400-0021: RNCC: 3 | RNVC: 2
5400-0021: RNCC: 3 | RNVC: 9

18 Dec 1981

3040-01-124-3810
Manual Control Lever

011243810
1011628: RNCC: 3 | RNVC: 2
55755C101: RNCC: 5 | RNVC: 9
755C101: RNCC: 5 | RNVC: 9
1FM: RNCC: 5 | RNVC: 9
910-168PC 20: RNCC: 5 | RNVC: 9
410B008: RNCC: 5 | RNVC: 9
1C F91363 8INCH: RNCC: C | RNVC: 1
1F3: RNCC: C | RNVC: 1
410-009: RNCC: C | RNVC: 1
1C: RNCC: C | RNVC: 1

1 Jan 1982

3040-01-124-2816
Rigid Connecting Link

011242816
74A661261-1001: RNCC: 3 | RNVC: 2
74A661261-1001: RNCC: 5 | RNVC: 2
74A661261-1001: RNCC: 5 | RNVC: 9
10106807: RNCC: 6 | RNVC: 9
74A661261: RNCC: D | RNVC: 9

30 Dec 1981

3040-01-125-6924
Shouldered Shaft

011256924
65265-02012-101: RNCC: 3 | RNVC: 2
65265-02012-101: RNCC: 5 | RNVC: 2
65265-02012-101: RNCC: 5 | RNVC: 9
ES3-DWG-1770: RNCC: 5 | RNVC: 9
65265-02012-101: RNCC: 5 | RNVC: 9

1 Feb 1982

3040-01-126-6012
Shouldered Shaft

011266012
65130-07121-104: RNCC: 3 | RNVC: 2

14 Feb 1982

3040-01-125-9178
Brake Disc

011259178
133-609: RNCC: 3 | RNVC: 2
65397-11902-101: RNCC: 5 | RNVC: 2

1 Feb 1982

3040-01-127-7039
Shouldered Shaft

011277039
78282: RNCC: 3 | RNVC: 2

6 Mar 1982

3040-01-128-1487
Linear Actuating Cylinder Assembly Parts Kit

011281487
138675: RNCC: 3 | RNVC: 2
052-PS017-400: RNCC: 5 | RNVC: 9
138675: RNCC: 5 | RNVC: 9

18 Mar 1982

3040-01-128-2404
Rigid Connecting Link

011282404
6512-7: RNCC: 3 | RNVC: 2
SR11393A107: RNCC: 5 | RNVC: 9
10106838: RNCC: 6 | RNVC: 9
SR11393A: RNCC: D | RNVC: 9

18 Mar 1982

3040-01-128-2402
Rigid Connecting Link

011282402
74A460604-1003: RNCC: 3 | RNVC: 2
74A460604-1003: RNCC: 5 | RNVC: 2
10153950: RNCC: 6 | RNVC: 9
74A460604: RNCC: D | RNVC: 9

18 Mar 1982

3040-01-128-2405
Rigid Connecting Link

011282405
74A635604-2001: RNCC: 3 | RNVC: 2
74A635604-2001: RNCC: 5 | RNVC: 2
10106839: RNCC: 6 | RNVC: 9
PL74A635604: RNCC: D | RNVC: 9
74A635604: RNCC: D | RNVC: 9

18 Mar 1982

3040-01-128-5476
Pawl

011285476
9348295: RNCC: 3 | RNVC: 2
22664: RNCC: 5 | RNVC: 1
3616640010: RNCC: 5 | RNVC: 2
711531516304: RNCC: 6 | RNVC: 9
10421322: RNCC: 6 | RNVC: 9

25 Mar 1982

3040-01-128-5832
Hub Clamp

011285832
74A731124-1001: RNCC: 3 | RNVC: 2
74A731124-1001: RNCC: 5 | RNVC: 2
74A731124-1001: RNCC: 5 | RNVC: 9
10106848: RNCC: 6 | RNVC: 9
74A731124: RNCC: D | RNVC: 9

25 Mar 1982

3040-01-129-1876
Linear Actuating Cylinder Piston

011291876
87841-0208 ITEM 2: RNCC: 3 | RNVC: 2
708-4684961 ITEM 2: RNCC: 3 | RNVC: 2
708-4684961 ITEM 2: RNCC: 5 | RNVC: 2
708-4684961: RNCC: D | RNVC: 9

1 Apr 1982

3040-01-129-3560
Shouldered Shaft

011293560
65391-11668-102: RNCC: 3 | RNVC: 2

5 Apr 1982

3040-01-129-3929
Bell Crank

011293929
65413-06401-041: RNCC: 3 | RNVC: 2

5 Apr 1982

3040-01-064-8864
Straight Shaft

010648864
11670869: RNCC: 3 | RNVC: 2

4 Sep 1978

3040-01-068-4404
Lower Right Front Push-Pull Control Assy

010684404
2528356: RNCC: 3 | RNVC: 2

25 Nov 1978

3040-01-106-5968
Shouldered Shaft

011065968
12292481: RNCC: 3 | RNVC: 2

22 Jan 1981

3040-01-106-9465
Shouldered Shaft

011069465
8347-15: RNCC: 3 | RNVC: 2

28 Jan 1981

3040-01-110-2313
Cylinder Head Cap

011102313
70044: RNCC: 3 | RNVC: 2

28 Mar 1981

3040-01-110-4301
Rigid Connecting Link

011104301
11629544: RNCC: 3 | RNVC: 2

31 Mar 1981

3040-01-125-8204
Bell Crank

011258204
3930AS541-1: RNCC: 3 | RNVC: 2
3930AS541-1: RNCC: 5 | RNVC: 2
74A733024-2001: RNCC: 5 | RNVC: 9
74A733024-2001: RNCC: 5 | RNVC: 9
10106817: RNCC: 6 | RNVC: 9

1 Feb 1982

3040-01-058-6262
Body Hub

010586262
3990416HL: RNCC: 3 | RNVC: 9

29 Mar 1978

3040-01-062-8199
Missile Snubber Cam

010628199
16S251-9: RNCC: 3 | RNVC: 2
16S251-9: RNCC: 3 | RNVC: 2
16S291-9: RNCC: 5 | RNVC: 2
16S251-9C: RNCC: 5 | RNVC: 2
16S251-9: RNCC: 5 | RNVC: 9

22 Jul 1978

3040-01-063-7778
Straight Shaft

010637778
31071-5: RNCC: 3 | RNVC: 2

13 Aug 1978

3040-01-067-5675
Straight Shaft

010675675
2P6245: RNCC: 3 | RNVC: 2
IPD2P6245: RNCC: 5 | RNVC: 9

3 Nov 1978

3040-01-068-0404
Linear Actuating Cylinder Piston

010680404
501929: RNCC: 3 | RNVC: 2
501929: RNCC: 3 | RNVC: 2

15 Nov 1978

3040-01-071-9846
Push-Pull Control Assembly

010719846
12266497-3: RNCC: 1 | RNVC: 2
565-749-005: RNCC: 3 | RNVC: 2
565-749-005: RNCC: C | RNVC: 1

18 Feb 1979

3040-01-071-6105
Rigid Connecting Link

010716105
16K0571-849: RNCC: 3 | RNVC: 2
3040PL0666048: RNCC: 6 | RNVC: 9

10 Feb 1979

3040-01-072-8171
Control Cam

010728171
12283265: RNCC: 3 | RNVC: 2

4 Mar 1979

3040-01-072-8157
Shouldered Shaft

010728157
12283293: RNCC: 3 | RNVC: 2

4 Mar 1979

3040-01-073-3059
Linear Actuating Cylinder Piston

010733059
12283305: RNCC: 3 | RNVC: 2

14 Mar 1979

3040-01-073-3057
Linear Actuating Cylinder Cap

010733057
12283307: RNCC: 3 | RNVC: 2

14 Mar 1979

3040-01-073-9706
Shaft Retaining Plate

010739706
12274142: RNCC: 3 | RNVC: 2
3040010739706: RNCC: 6 | RNVC: 9

24 Mar 1979

3040-01-073-4338
Linear Actuating Cylinder Piston

010734338
12267103: RNCC: 3 | RNVC: 2
12267103: RNCC: 5 | RNVC: 2
DAX10944: RNCC: 5 | RNVC: 9

15 Mar 1979

3040-01-073-9714
Shaft Collar

010739714
12274188: RNCC: 3 | RNVC: 2

24 Mar 1979

3040-01-074-4639
Worm Shaft

010744639
02-4578-02: RNCC: 3 | RNVC: 2
2-1538: RNCC: 5 | RNVC: 9
02-1538-00: RNCC: 5 | RNVC: 9
A29669-001: RNCC: 5 | RNVC: 9
FDE474 PAGE 4 ITEM 9: RNCC: C | RNVC: 1

31 Mar 1979

3040-01-074-9986
Rigid Connecting Link

010749986
212-001-052-105: RNCC: 3 | RNVC: 2
212-001-052-105: RNCC: 5 | RNVC: 2
212-001-052-105: RNCC: 5 | RNVC: 2

11 Apr 1979

3040-01-076-4341
Straight Shaft

010764341
12277444: RNCC: 3 | RNVC: 9
12277444: RNCC: 5 | RNVC: 2

6 May 1979

3040-01-076-2267
Spur Gearshaft

010762267
000993-858-1: RNCC: 3 | RNVC: 2
7749879: RNCC: 5 | RNVC: 9
7749879-1: RNCC: 5 | RNVC: 9
000993-858: RNCC: D | RNVC: 9

3 May 1979

3040-01-077-4388
Rigid Connecting Link

010774388
4500-219: RNCC: 3 | RNVC: 2
4500: RNCC: D | RNVC: 9

23 May 1979

3040-01-078-1190
Nonrotating Shaft Eye Bracket

010781190
12282043: RNCC: 3 | RNVC: 2
12282043: RNCC: D | RNVC: 9

9 Jun 1979

3040-01-078-1191
Shouldered Shaft

010781191
12282047: RNCC: 3 | RNVC: 2
3040010781191: RNCC: 6 | RNVC: 9

9 Jun 1979

3040-01-078-7702
Flexible Drive Shaft

010787702
12271708: RNCC: 3 | RNVC: 2
312-16213X-2: RNCC: 5 | RNVC: 2
3XR3-8.44: RNCC: 5 | RNVC: 2
312-16213X-2: RNCC: 5 | RNVC: 9
3XR3-8.44: RNCC: 5 | RNVC: 9

20 Jun 1979

3040-01-079-3463
Pawl

010793463
3500774-3: RNCC: 3 | RNVC: 2
3500774-1: RNCC: 5 | RNVC: 9
3500774-1: RNCC: 5 | RNVC: 9

1 Jul 1979

3040-01-081-2144
Spur Gearshaft

010812144
12286970: RNCC: 1 | RNVC: 2
2524743-1: RNCC: 3 | RNVC: 2
2524743-1: RNCC: 5 | RNVC: 2
2524743: RNCC: 5 | RNVC: 9
524743: RNCC: 5 | RNVC: 9
3040010812144: RNCC: 6 | RNVC: 9

10 Aug 1979

3040-01-083-3494
Inner Assembly Shaft

010833494
5073F152-1: RNCC: 3 | RNVC: 2

21 Sep 1979

3040-01-083-5644
Straight Shaft

010835644
12284021: RNCC: 3 | RNVC: 2
XM6028: RNCC: 5 | RNVC: 9

26 Sep 1979

3040-01-084-1324
Shouldered Shaft

010841324
12267822: RNCC: 3 | RNVC: 2
DAX12803: RNCC: 5 | RNVC: 2

11 Oct 1979

3040-01-085-1512
Shouldered Shaft

010851512
XA3997-7: RNCC: 3 | RNVC: 2

31 Oct 1979

3040-01-084-9647
Shouldered Shaft

010849647
NP3352003: RNCC: 3 | RNVC: 9
NP3352003: RNCC: C | RNVC: 1

27 Oct 1979

3040-01-087-0272
Linear Actuating Cylinder Assembly Parts Kit

010870272
9056097: RNCC: 3 | RNVC: 9
3324-34: RNCC: 5 | RNVC: 2
300650: RNCC: 5 | RNVC: 9

10 Dec 1979

3040-01-087-4276
Shouldered Shaft

010874276
5034T80P01: RNCC: 3 | RNVC: 2

17 Dec 1979

3040-01-087-4293
Control Cam

010874293
755218-2: RNCC: 3 | RNVC: 2
755218-2: RNCC: 5 | RNVC: 2
755218-2: RNCC: 5 | RNVC: 2

17 Dec 1979

3040-01-088-1129
Pivot Shaft

010881129
9240-003 SHEET 19: RNCC: 3 | RNVC: 2
26800118: RNCC: 5 | RNVC: 9
9240-003-19: RNCC: 5 | RNVC: 9

6 Jan 1980

3040-01-089-1425
Flexible Shaft Assembly

010891425
FR150SHXBH0400: RNCC: 3 | RNVC: 2
3XK6-4: RNCC: 3 | RNVC: 9

26 Jan 1980

3040-01-089-2055
Shouldered Shaft

010892055
5143232: RNCC: 3 | RNVC: 2
019-00001-840: RNCC: 5 | RNVC: 2
5143233: RNCC: 5 | RNVC: 9

27 Jan 1980

3040-01-089-3087
Shouldered Shaft

010893087
117D2306: RNCC: 3 | RNVC: 2

30 Jan 1980

3040-01-089-9995
Shaft And Pin

010899995
210110: RNCC: 3 | RNVC: 2

10 Feb 1980

3040-01-089-7755
Worm Shaft

010897755
12524251: RNCC: 3 | RNVC: 2

7 Feb 1980

3040-01-091-3844
Rigid Connecting Link

010913844
70400-02252-129: RNCC: 1 | RNVC: 2
2004-5: RNCC: 3 | RNVC: 2
AS4-1000-129: RNCC: 5 | RNVC: 9
1100090-129: RNCC: 5 | RNVC: 9
SR11728A: RNCC: 5 | RNVC: 9
3040PL1938105: RNCC: 6 | RNVC: 9

7 Mar 1980

3040-01-091-3846
Rigid Connecting Link

010913846
70400-02252-122: RNCC: 3 | RNVC: 2
70400-02252-122: RNCC: 5 | RNVC: 9
1100080-122: RNCC: 5 | RNVC: 9
2007-1: RNCC: 5 | RNVC: 9
SR11721A: RNCC: 5 | RNVC: 9
3040PL1961972: RNCC: 6 | RNVC: 9
70400-02252: RNCC: D | RNVC: 9

7 Mar 1980

3040-01-092-2078
Rigid Connecting Link

010922078
70400-01250-046: RNCC: 3 | RNVC: 2
1100020-046: RNCC: 5 | RNVC: 9
2012-5: RNCC: 5 | RNVC: 9
AS4-1030-046: RNCC: 5 | RNVC: 9
SR10989A: RNCC: 5 | RNVC: 9

21 Mar 1980

3040-01-094-8823
Gear Reduction Housing Assy

010948823
11686369: RNCC: 3 | RNVC: 2

17 May 1980

3040-01-096-3934
Straight Shaft

010963934
384-1165-00: RNCC: 3 | RNVC: 2

18 Jun 1980

3040-01-096-1149
Shouldered Shaft

010961149
70217-01031-116: RNCC: 3 | RNVC: 2
70217-01031-116: RNCC: 5 | RNVC: 9

14 Jun 1980

3040-01-097-6716
Shaft Collar

010976716
11584765: RNCC: 3 | RNVC: 2

17 Jul 1980

3040-01-098-6945
Shouldered Shaft

010986945
16200492: RNCC: 3 | RNVC: 2
16200492: RNCC: 3 | RNVC: 9
NAFB4478G: RNCC: 5 | RNVC: 9
CAFB4478G: RNCC: 5 | RNVC: 9
CAFB4478G: RNCC: C | RNVC: 1
16200494: RNCC: C | RNVC: 1

7 Aug 1980

3040-01-099-0162
Shouldered Shaft

010990162
12295228: RNCC: 3 | RNVC: 2
12295228: RNCC: 5 | RNVC: 2

10 Aug 1980

3040-01-098-8948
Rigid Connecting Link

010988948
16102051: RNCC: 3 | RNVC: 2
16102051: RNCC: 3 | RNVC: 9
16403147 ITEM 43: RNCC: 5 | RNVC: 2
CAFB5082A: RNCC: 5 | RNVC: 2
16403147 ITEM 43: RNCC: 5 | RNVC: 9
CAFB5082A: RNCC: 5 | RNVC: 9

9 Aug 1980

3040-01-099-1414
Push-Pull Control Assembly

010991414
13217E6815-2: RNCC: 3 | RNVC: 2
048711-00-048.C: RNCC: 5 | RNVC: 2
048701-00-048.C: RNCC: 5 | RNVC: 9
048701-00-048.C: RNCC: 5 | RNVC: 9
B48701-48-00: RNCC: 5 | RNVC: 9
13217E6815: RNCC: 5 | RNVC: 9

13 Aug 1980

3040-01-101-1846
Rotating Shaft Eye Bracket

011011846
G2100: RNCC: 3 | RNVC: 2

21 Sep 1980

3040-01-100-4924
Piston Ring

011004924
9-904-103589: RNCC: 3 | RNVC: 2
250087: RNCC: 5 | RNVC: 2
222104: RNCC: 5 | RNVC: 2
222104: RNCC: 5 | RNVC: 9

7 Sep 1980

3040-01-102-8167
Rotating Shaft Eye Bracket

011028167
43719: RNCC: 3 | RNVC: 2
43719: RNCC: 5 | RNVC: 9
63480: RNCC: 5 | RNVC: 9

29 Oct 1980

3040-01-102-9104
Remote Control Lever

011029104
04110306: RNCC: 3 | RNVC: 2

30 Oct 1980

3040-01-103-7302
Straight Shaft

011037302
778-1535-003: RNCC: 3 | RNVC: 2
778-1535: RNCC: D | RNVC: 9

18 Nov 1980

3040-01-104-0187
Shouldered Shaft

011040187
26-2290: RNCC: 3 | RNVC: 2

25 Nov 1980

3040-01-105-2707
Shouldered Shaft

011052707
60520-01: RNCC: 3 | RNVC: 2
30030 ITEM 6: RNCC: 5 | RNVC: 2
30030: RNCC: D | RNVC: 9

19 Dec 1980

3040-01-106-7811
Rotating Shaft Eye Bracket

011067811
12297751: RNCC: 3 | RNVC: 2

25 Jan 1981

3040-01-107-0996
Straight Shaft

011070996
13028009: RNCC: 3 | RNVC: 2
10085825: RNCC: 6 | RNVC: 9

30 Jan 1981

3040-01-107-6786
Shouldered Shaft

011076786
74A450613-2005: RNCC: 3 | RNVC: 2
74A450613-2005: RNCC: 5 | RNVC: 2
74A450613-2005: RNCC: 5 | RNVC: 2
74A450613-2005: RNCC: 5 | RNVC: 2
74A450613-2005: RNCC: 5 | RNVC: 2
74A450613-2005: RNCC: 5 | RNVC: 2
74A450613-2005: RNCC: 5 | RNVC: 9
74A450613-2005: RNCC: 5 | RNVC: 9
74A450613-2005: RNCC: 5 | RNVC: 9
74A450613-2005: RNCC: 5 | RNVC: 9

11 Feb 1981

3040-01-107-7544
Rigid Connecting Link

011077544
2600129-1: RNCC: 3 | RNVC: 2
2600129-1: RNCC: 5 | RNVC: 2

12 Feb 1981

3040-01-108-4911
Shouldered Shaft

011084911
12292671: RNCC: 3 | RNVC: 2

28 Feb 1981

3040-01-109-2549
Remote Control Lever

011092549
118-108: RNCC: 3 | RNVC: 2

12 Mar 1981

3040-01-109-3059
Bell Crank

011093059
70400-01212-043: RNCC: 3 | RNVC: 2

12 Mar 1981

3040-01-109-4399
Control Cam

011094399
28363: RNCC: 3 | RNVC: 2
60-28380 ITEM 18: RNCC: 5 | RNVC: 2
60-28380: RNCC: D | RNVC: 9

15 Mar 1981

3040-01-108-5343
Bell Crank

011085343
12299010: RNCC: 3 | RNVC: 2
1229010: RNCC: 5 | RNVC: 9
10085843: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-110-3805
Shaft Retaining Plate

011103805
804589-1: RNCC: 3 | RNVC: 2
1-030-046: RNCC: 5 | RNVC: 2

29 Mar 1981

3040-01-111-4408
Rigid Connecting Link

011114408
3161452-8: RNCC: 3 | RNVC: 2
3161452-8: RNCC: 5 | RNVC: 9

17 Apr 1981

3040-01-112-3003
Control Assembly

011123003
13216E6328-3: RNCC: 3 | RNVC: 2
130-032-498: RNCC: 5 | RNVC: 2
130-032-498: RNCC: 5 | RNVC: 9

1 May 1981

3040-01-112-8770
Straight Shaft

011128770
3365758-1: RNCC: 3 | RNVC: 2
3365758-1: RNCC: 5 | RNVC: 2
3365758-1: RNCC: 5 | RNVC: 2

12 May 1981

3040-01-114-6187
Shouldered Shaft

011146187
1587269-4: RNCC: 3 | RNVC: 2
1587269-4: RNCC: 5 | RNVC: 9

20 Jun 1981

3040-01-114-6650
Shouldered Shaft

011146650
3882603-1: RNCC: 3 | RNVC: 2
3882603-1: RNCC: 5 | RNVC: 9

20 Jun 1981

3040-01-114-9288
Shouldered Shaft

011149288
35 79501 2140 3: RNCC: 3 | RNVC: 2

25 Jun 1981

3040-01-115-0904
Shouldered Shaft

011150904
L102738: RNCC: 3 | RNVC: 2

27 Jun 1981

3040-01-115-5989
Straight Shaft

011155989
A6-27: RNCC: 3 | RNVC: 2
658-451-9215: RNCC: 5 | RNVC: 2
933C055431-1: RNCC: 5 | RNVC: 9
055431-1: RNCC: 7 | RNVC: 2
933C055431-1: RNCC: C | RNVC: 1

10 Jul 1981

3040-01-116-1311
Shouldered Shaft

011161311
142D5222: RNCC: 3 | RNVC: 2
10106771: RNCC: 6 | RNVC: 9

21 Jul 1981

3040-01-116-8481
Shouldered Shaft

011168481
4202014-1: RNCC: 3 | RNVC: 2
10106774: RNCC: 6 | RNVC: 9

4 Aug 1981

3040-01-116-8156
Shouldered Shaft

011168156
12292456: RNCC: 3 | RNVC: 2

3 Aug 1981

3040-01-117-5224
Shouldered Shaft

011175224
12292608: RNCC: 3 | RNVC: 2

15 Aug 1981

3040-01-117-7358
Rigid Connecting Link

011177358
145C3340-7: RNCC: 3 | RNVC: 2

21 Aug 1981

3040-01-117-7491
Shouldered Shaft

011177491
2645238: RNCC: 3 | RNVC: 2

21 Aug 1981

3040-01-118-5286
Brake Disc

011185286
AS-134521: RNCC: 3 | RNVC: 9
AS-134521: RNCC: 5 | RNVC: 2
AS-134521: RNCC: 5 | RNVC: 9

11 Mar 2003

3040-01-119-9101
Clamp Head Plate

011199101
215-844-3200: RNCC: 3 | RNVC: 2
88-D-393: RNCC: 3 | RNVC: 2
4687549-0005: RNCC: 3 | RNVC: 2
2642-693-02 ITEM 5: RNCC: 5 | RNVC: 2
845-4687549 ITEM 5: RNCC: 5 | RNVC: 2
20-83-0500: RNCC: 5 | RNVC: 9
2642-693-02 ITEM5: RNCC: 5 | RNVC: 9
2642-693-02: RNCC: D | RNVC: 9
845-4687549: RNCC: D | RNVC: 9

7 Oct 1981

3040-01-120-8286
Shouldered Shaft

011208286
609-4676630 ITEM2: RNCC: 3 | RNVC: 2
87577-3310IT2: RNCC: 3 | RNVC: 2
87577-3310 ITEM 2: RNCC: 5 | RNVC: 2
609-4676630ITEM2: RNCC: 5 | RNVC: 2
609-4676630: RNCC: D | RNVC: 9

23 Oct 1981

3040-01-120-2885
Housing Assembly

011202885
12290725-1: RNCC: 3 | RNVC: 2

15 Oct 1981

3040-01-120-4558
Spur Gearshaft

011204558
1092542: RNCC: 3 | RNVC: 2

18 Oct 1981

3040-01-121-1903
Valve Shaft

011211903
20428-2131: RNCC: 3 | RNVC: 2
20428-001 FIND 25: RNCC: 5 | RNVC: 9
20428-002 FIND 25: RNCC: 5 | RNVC: 9
20428-1040: RNCC: 5 | RNVC: 9
20428-001: RNCC: D | RNVC: 9

31 Oct 1981

3040-01-121-1993
Rigid Connecting Link

011211993
87643-7504 ITEM 12: RNCC: 3 | RNVC: 2
501-4675698 ITEM 12: RNCC: 5 | RNVC: 2
501-4675698: RNCC: D | RNVC: 9
87643-7504: RNCC: D | RNVC: 9

31 Oct 1981

3040-01-121-1911
Straight Shaft

011211911
803-4384431-A-080: RNCC: 3 | RNVC: 2
810-4384431-A-37: RNCC: 5 | RNVC: 9
810-4384431: RNCC: D | RNVC: 9
803-4384431: RNCC: D | RNVC: 9

31 Oct 1981

3040-01-123-2231
Counterbalance Weight

011232231
579-1047-05: RNCC: 3 | RNVC: 2
10163647: RNCC: 6 | RNVC: 9

8 Dec 1981

3040-01-123-5749
Shaft Retaining Plate

011235749
520-4674728 ITEM 6: RNCC: 3 | RNVC: 2
87615-2010 ITEM 6: RNCC: 3 | RNVC: 2
520-4674728: RNCC: D | RNVC: 9
87615-2010: RNCC: D | RNVC: 9

15 Dec 1981

3040-01-123-5723
Shouldered Shaft

011235723
87776-0106 ITEM 7: RNCC: 3 | RNVC: 2
201-4684481 ITEM 7: RNCC: 5 | RNVC: 2
87776-0106 ITEM 7: RNCC: 5 | RNVC: 9
201-4684481: RNCC: D | RNVC: 9
87776-0106: RNCC: D | RNVC: 9

15 Dec 1981

3040-01-125-0537
Shaft Retaining Plate

011250537
12307436: RNCC: 3 | RNVC: 2

20 Jan 1982

3040-01-125-0645
Shouldered Shaft

011250645
3168811-2: RNCC: 3 | RNVC: 2
10106809: RNCC: 6 | RNVC: 9

20 Jan 1982

3040-01-125-0611
Shouldered Shaft

011250611
12307395: RNCC: 3 | RNVC: 2

20 Jan 1982

3040-01-125-7327
Bevel Gearshaft

011257327
65391-11692-101: RNCC: 3 | RNVC: 2

1 Feb 1982

3040-01-125-8362
Shouldered Shaft

011258362
1534AS427: RNCC: 3 | RNVC: 2
1534AS427: RNCC: 5 | RNVC: 2
1534AS427: RNCC: 5 | RNVC: 2
1534AS427: RNCC: 5 | RNVC: 2
1534AS427: RNCC: 5 | RNVC: 2
D013448-1: RNCC: 5 | RNVC: 9
1534AS427: RNCC: 5 | RNVC: 9
10106824: RNCC: 6 | RNVC: 9
D013448-1: RNCC: C | RNVC: 1

1 Feb 1982

3040-01-125-8507
Lever-Wedge Lock Indicator

011258507
74A733608-2007: RNCC: 3 | RNVC: 2
74A733608-2007: RNCC: 5 | RNVC: 1
3929AS865: RNCC: 5 | RNVC: 2
74A733608-2007: RNCC: 5 | RNVC: 9
74A733608-2007: RNCC: C | RNVC: 1

1 Feb 1982

3040-01-125-9990
Speedometer-Tachometer Drive Adapter

011259990
5145978: RNCC: 3 | RNVC: 2

5 Feb 1982

3040-01-126-9054
Linear Actuating Cylinder Assembly

011269054
G106168: RNCC: 3 | RNVC: 2
G101177: RNCC: 5 | RNVC: 9

19 Feb 1982

3040-01-128-2400
Rigid Connecting Link

011282400
74A733026-2001: RNCC: 3 | RNVC: 2
3930AS521: RNCC: 3 | RNVC: 2
74A733026-2001: RNCC: 5 | RNVC: 2
74A733026-2001: RNCC: 5 | RNVC: 2
74A733026-2001: RNCC: 5 | RNVC: 9
10106836: RNCC: 6 | RNVC: 9
74A733026: RNCC: D | RNVC: 9

18 Mar 1982

3040-01-127-8236
Rigid Connecting Link

011278236
1534AS211: RNCC: 3 | RNVC: 2
1534AS211: RNCC: 5 | RNVC: 2
1534AS211: RNCC: 5 | RNVC: 2
1534AS211: RNCC: 5 | RNVC: 2
1534AS211: RNCC: 5 | RNVC: 2
D013429-501: RNCC: 5 | RNVC: 9
D013429-501: RNCC: 5 | RNVC: 9
1534AS211: RNCC: 5 | RNVC: 9
10143580: RNCC: 6 | RNVC: 9
D013429: RNCC: D | RNVC: 9

9 Mar 1982

3040-01-128-5875
Spur Gearshaft

011285875
2771554-102: RNCC: 3 | RNVC: 2
2771554-102: RNCC: 3 | RNVC: 9
10130548: RNCC: 6 | RNVC: 9
2771554: RNCC: D | RNVC: 9

25 Mar 1982

3040-01-129-0897
Rigid Connecting Link

011290897
4700-9: RNCC: 3 | RNVC: 2
74J618000-113: RNCC: 5 | RNVC: 2
SR11573A113: RNCC: 5 | RNVC: 9
10106864: RNCC: 6 | RNVC: 9

31 Mar 1982

3040-01-062-4166
Straight Shaft

010624166
31085-1: RNCC: 3 | RNVC: 2

16 Jul 1978

3040-01-062-4053
Rigid Connecting Link

010624053
107C1550-11: RNCC: 3 | RNVC: 2
107C1550-11: RNCC: 5 | RNVC: 2

15 Jul 1978

3040-01-061-3865
Rigid Connecting Link

010613865
4500-289: RNCC: 3 | RNVC: 2
4028-33: RNCC: 5 | RNVC: 9

19 Jun 1978

3040-01-063-9311
Counterbalance Weight

010639311
579-1024-05: RNCC: 3 | RNVC: 2

14 Aug 1978

3040-01-064-7716
Shouldered Shaft

010647716
F-5X9H10X1: RNCC: 3 | RNVC: 9
PL-11140-F-18 ITEM10: RNCC: 5 | RNVC: 9
F-5X9H10X1: RNCC: 5 | RNVC: 9
F-5X9H10X1: RNCC: C | RNVC: 1
PL-11140-F-18 ITEM10: RNCC: C | RNVC: 1
11087-F-18: RNCC: D | RNVC: 9

31 Aug 1978

3040-01-064-2848
Linear Actuating Cylinder Assembly

010642848
8071-001: RNCC: 3 | RNVC: 2
10210: RNCC: 5 | RNVC: 2
3000-0067: RNCC: 5 | RNVC: 2
3000-0067: RNCC: 5 | RNVC: 9
10210: RNCC: 5 | RNVC: 9
10210: RNCC: 5 | RNVC: 9

20 Aug 1978

3040-01-065-5122
Rigid Connecting Link

010655122
709-4684909 ITEM 28: RNCC: 3 | RNVC: 2

21 Sep 1978

3040-01-067-6345
Control Cam

010676345
834493PC36: RNCC: 3 | RNVC: 2
829942: RNCC: 5 | RNVC: 2
834493: RNCC: D | RNVC: 9

4 Nov 1978

3040-01-067-7507
Shouldered Shaft

010677507
507309: RNCC: 3 | RNVC: 2
507309: RNCC: 3 | RNVC: 2

6 Nov 1978

3040-01-069-2071
Shouldered Shaft

010692071
3151026: RNCC: 3 | RNVC: 2
3151026: RNCC: 5 | RNVC: 2
3151026: RNCC: 5 | RNVC: 2
782801: RNCC: 5 | RNVC: 2
782801: RNCC: 5 | RNVC: 9
782801-000: RNCC: 5 | RNVC: 9

10 Dec 1978

3040-01-070-5967
Rigid Connecting Link

010705967
12265631: RNCC: 3 | RNVC: 2

14 Jan 1979

3040-01-074-3695
Rigid Connecting Link

010743695
12271202: RNCC: 3 | RNVC: 2
3-160-033-02: RNCC: 5 | RNVC: 2
12286594: RNCC: 5 | RNVC: 9

30 Mar 1979

3040-01-074-3745
Remote Control Lever

010743745
12286483: RNCC: 3 | RNVC: 2
3-140-074-18: RNCC: 5 | RNVC: 2

30 Mar 1979

3040-01-075-7390
Spur Gearshaft

010757390
24001: RNCC: 3 | RNVC: 2
2000-23150 ITEM 1: RNCC: 5 | RNVC: 2

26 Apr 1979

3040-01-076-8667
Linear Actuating Cylinder Piston

010768667
9N4018: RNCC: 3 | RNVC: 2

13 May 1979

3040-01-078-4383
Shouldered Shaft

010784383
12283096: RNCC: 3 | RNVC: 2
XM66690: RNCC: 5 | RNVC: 9

13 Jun 1979

3040-01-079-3030
Rigid Connecting Link

010793030
12278972: RNCC: 3 | RNVC: 2

1 Jul 1979

3040-01-079-4798
Spur Gearshaft

010794798
12267961: RNCC: 3 | RNVC: 2
12267961: RNCC: 5 | RNVC: 2
DAX12724: RNCC: 5 | RNVC: 9
3040010794798: RNCC: 6 | RNVC: 9

7 Jul 1979

3040-01-081-1757
Linear Actuating Cylinder Head

010811757
12267182: RNCC: 1 | RNVC: 2
23011045: RNCC: 3 | RNVC: 2
DAX12890: RNCC: 5 | RNVC: 2

10 Aug 1979

3040-01-082-7394
Rigid Connecting Link

010827394
16P182-3: RNCC: 3 | RNVC: 2
16P182-3: RNCC: 5 | RNVC: 2
3040PL0666824: RNCC: 6 | RNVC: 9
16P182-3: RNCC: 8 | RNVC: 2

9 Sep 1979

3040-01-082-7911
Linear Actuating Cylinder Piston

010827911
2775539-101: RNCC: 3 | RNVC: 2
2775539-101: RNCC: 5 | RNVC: 2

10 Sep 1979

3040-01-083-5657
Linear Actuating Cylinder Assembly Parts Kit

010835657
355909: RNCC: 3 | RNVC: 2
355909: RNCC: 5 | RNVC: 2
280118: RNCC: 5 | RNVC: 9
176528: RNCC: 5 | RNVC: 9

26 Sep 1979

3040-01-084-1327
Shouldered Shaft

010841327
12267411: RNCC: 3 | RNVC: 2
12267411: RNCC: 5 | RNVC: 2
DAX12547: RNCC: 5 | RNVC: 9

11 Oct 1979

3040-01-084-5978
Shaft Assembly

010845978
2665169: RNCC: 3 | RNVC: 2

23 Oct 1979

3040-01-084-5515
Bell Crank

010845515
L51047: RNCC: 3 | RNVC: 2

20 Oct 1979

3040-01-084-7864
Linear Actuating Cylinder

010847864
87434-2510 ITEM 10: RNCC: 3 | RNVC: 2
4677777A-0010: RNCC: 5 | RNVC: 2
123-4677777 ITEM10: RNCC: 5 | RNVC: 2
123-4677777 ITE: RNCC: C | RNVC: 1

24 Oct 1979

3040-01-087-1294
Piston Ring

010871294
73769: RNCC: 3 | RNVC: 2
73405 ITEM 30: RNCC: 5 | RNVC: 2
NK3150-1: RNCC: C | RNVC: 1
73405: RNCC: D | RNVC: 9

12 Dec 1979

3040-01-088-2324
Ball Joint

010882324
55888-1: RNCC: 3 | RNVC: 9
55888-1: RNCC: 5 | RNVC: 2
55888-1: RNCC: 5 | RNVC: 9

8 Jan 1980

3040-01-088-9401
Straight Shaft

010889401
12256551: RNCC: 3 | RNVC: 2

23 Jan 1980

3040-01-087-1606
Rigid Connecting Link

010871606
70400-02264-063: RNCC: 3 | RNVC: 2
70400-02264-063: RNCC: 5 | RNVC: 2
70400-02264-057: RNCC: 5 | RNVC: 9
3040PL1983139: RNCC: 6 | RNVC: 9
70400-02264-063: RNCC: 7 | RNVC: 2

13 Dec 1979

3040-01-090-4483
Bell Crank

010904483
12255965-2: RNCC: 3 | RNVC: 2

17 Feb 1980

3040-01-090-8214
Straight Shaft

010908214
72D225609-2027: RNCC: 3 | RNVC: 2

24 Feb 1980

3040-01-091-3843
Rigid Connecting Link

010913843
70400-02252-116: RNCC: 3 | RNVC: 2
1100060-116: RNCC: 5 | RNVC: 9
2002-3: RNCC: 5 | RNVC: 9
70400-02252-116: RNCC: 5 | RNVC: 9
SR11716A: RNCC: 5 | RNVC: 9
3040PL1959349: RNCC: 6 | RNVC: 9

7 Mar 1980

3040-01-091-7577
Shouldered Shaft

010917577
14-50758-5: RNCC: 3 | RNVC: 2
14-50758-5: RNCC: 5 | RNVC: 9

12 Mar 1980

3040-01-093-3060
Extension Shaft

010933060
384-1311-01: RNCC: 3 | RNVC: 2

15 Apr 1980

3040-01-095-1022
Spur Gearshaft

010951022
12292370: RNCC: 3 | RNVC: 2

21 May 1980

3040-01-095-3237
Bevel Gearshaft

010953237
519917-1: RNCC: 3 | RNVC: 2

29 May 1980

3040-01-095-7522
Rigid Connecting Link

010957522
70400-01255-103: RNCC: 1 | RNVC: 2
2020-3: RNCC: 3 | RNVC: 2
70400-01255-103: RNCC: 5 | RNVC: 9
SR11629A-103: RNCC: 5 | RNVC: 9
3040PL1939759: RNCC: 6 | RNVC: 9
70400-01255: RNCC: D | RNVC: 9

5 Jun 1980

3040-01-096-1136
Rigid Connecting Link

010961136
70400-02252-130: RNCC: 3 | RNVC: 2
2003-1: RNCC: 5 | RNVC: 2
1100100-130: RNCC: 5 | RNVC: 9
SR11770A: RNCC: 5 | RNVC: 9
SR11824A: RNCC: 5 | RNVC: 9
3040PL1996433: RNCC: 6 | RNVC: 9

14 Jun 1980

3040-01-096-5976
Stylus Arm Pivot

010965976
875-A-521: RNCC: 3 | RNVC: 2

25 Jun 1980

3040-01-097-2088
Brake Disc

010972088
8413-1: RNCC: 3 | RNVC: 2
8413-1: RNCC: 5 | RNVC: 9

7 Jul 1980

3040-01-097-2210
Shouldered Shaft

010972210
GS8406M3-31: RNCC: 3 | RNVC: 2

8 Jul 1980

3040-01-099-2485
Shaft Retaining Plate

010992485
2227069-1: RNCC: 3 | RNVC: 2
2227069-1: RNCC: 5 | RNVC: 1
2227069-1: RNCC: 5 | RNVC: 9

15 Aug 1980

3040-01-104-9152
Manual Control Lever

011049152
12276914: RNCC: 3 | RNVC: 2

13 Dec 1980

3040-01-105-1024
Linear Actuating Cylinder

011051024
AF510: RNCC: 3 | RNVC: 2

17 Dec 1980

3040-01-105-8791
Bell Crank

011058791
12297138: RNCC: 3 | RNVC: 2

7 Jan 1981

3040-01-106-1356
Shaft Retaining Plate

011061356
87791-6101 ITEM 21: RNCC: 3 | RNVC: 2
4775911-0021: RNCC: 5 | RNVC: 2
516-4775911 ITEM 21: RNCC: 5 | RNVC: 2
516-4775911: RNCC: D | RNVC: 9

14 Jan 1981

3040-01-106-8062
Rigid Connecting Link

011068062
12297339: RNCC: 3 | RNVC: 2

25 Jan 1981

3040-01-105-4026
Hydraulic Accumulator

011054026
12304412: RNCC: 3 | RNVC: 2
3040011054026: RNCC: 6 | RNVC: 9

21 Dec 1980

3040-01-106-8197
Spur Gearshaft

011068197
12295273: RNCC: 3 | RNVC: 2

25 Jan 1981

3040-01-107-3388
Rigid Connecting Link

011073388
12294965: RNCC: 3 | RNVC: 2
12294965: RNCC: 5 | RNVC: 2
10395326: RNCC: 6 | RNVC: 9

4 Feb 1981

3040-01-108-1093
Rotating Shaft Eye Bracket

011081093
12269090: RNCC: 3 | RNVC: 2
3040011081093: RNCC: 5 | RNVC: 9
3040011081093: RNCC: 6 | RNVC: 9

21 Feb 1981

Load More Results