What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 128 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 128 of 300

3040-01-185-3777
Hub Clamp

011853777
10025269: RNCC: 3 | RNVC: 2
K-2204-3: RNCC: 5 | RNVC: 9
A-2204-3: RNCC: D | RNVC: 9

27 Jul 1984

3040-01-185-9504
Friction Lining

011859504
2C1-245-2: RNCC: 3 | RNVC: 2
2C1-245-2: RNCC: 3 | RNVC: 9
M90-11-3: RNCC: 5 | RNVC: 9
M-9011-3: RNCC: 5 | RNVC: 9
2C1-245: RNCC: 5 | RNVC: 9
2D3-990 PC 25: RNCC: C | RNVC: 1
2D3-990 ITEM 25: RNCC: C | RNVC: 1

5 Aug 1984

3040-01-184-6852
Shouldered Shaft

011846852
014417-501: RNCC: 3 | RNVC: 2
014417-501: RNCC: 3 | RNVC: 9

21 Jul 1984

3040-01-143-4363
Knife Drive Shaft

011434363
1932700: RNCC: 3 | RNVC: 2
3294643PC14: RNCC: 5 | RNVC: 2
N57928PC14: RNCC: 5 | RNVC: 2
3-294-651: RNCC: 5 | RNVC: 2
N19327: RNCC: 5 | RNVC: 9
N19327: RNCC: 5 | RNVC: 9
N57928: RNCC: D | RNVC: 9
3294643: RNCC: D | RNVC: 9

3 Dec 1982

3040-01-143-7324
Piston Mounting Shaft

011437324
2494716: RNCC: 3 | RNVC: 2
2494716: RNCC: 5 | RNVC: 2
10159228: RNCC: 6 | RNVC: 9

8 Dec 1982

3040-01-144-0230
Rigid Connecting Link

011440230
65217-04005-105: RNCC: 3 | RNVC: 2

13 Dec 1982

3040-01-167-2036
Shouldered Shaft

011672036
153 6091-801: RNCC: 3 | RNVC: 2
90053-991: RNCC: 3 | RNVC: 9
1536091-801: RNCC: 5 | RNVC: 2
1536091-801: RNCC: 5 | RNVC: 9
90053-991: RNCC: 5 | RNVC: 9
472-9858: RNCC: 6 | RNVC: 9

23 Nov 1983

3040-01-170-8423
Rigid Connecting Link

011708423
1281238-101: RNCC: 3 | RNVC: 2

29 Jan 1984

3040-01-176-9615
Remote Control Lever

011769615
5740231: RNCC: 3 | RNVC: 2
15155: RNCC: 5 | RNVC: 9

18 Apr 1984

3040-01-177-5422
Nonrotating Shaft Eye Bracket

011775422
5R5305: RNCC: 3 | RNVC: 2

26 Apr 1984

3040-01-179-0889
Rigid Connecting Link

011790889
7-117700173-3: RNCC: 3 | RNVC: 2
7-117700173-3: RNCC: 5 | RNVC: 9

16 May 1984

3040-01-179-1348
Bell Crank

011791348
13211E8974: RNCC: 3 | RNVC: 2
13211E8974: RNCC: 3 | RNVC: 2

16 May 1984

3040-01-179-2547
Shaft Retaining Plate

011792547
676144C2: RNCC: 3 | RNVC: 2
676144C2: RNCC: 5 | RNVC: 9
676144C1: RNCC: 5 | RNVC: 9

16 May 1984

3040-01-178-5537
Mechanical Drive Housing

011785537
11672504: RNCC: 3 | RNVC: 2

7 May 1984

3040-01-175-7161
Shouldered Shaft

011757161
3880078-2: RNCC: 3 | RNVC: 2
10159290: RNCC: 6 | RNVC: 9

5 Apr 1984

3040-01-180-0680
Remote Control Lever

011800680
P412709: RNCC: 3 | RNVC: 9
P412709: RNCC: C | RNVC: 1

24 May 1984

3040-01-129-8473
Bell Crank

011298473
65414-03104-055: RNCC: 3 | RNVC: 2

12 Apr 1982

3040-01-129-8479
Bell Crank

011298479
65410-03110-053: RNCC: 3 | RNVC: 2

12 Apr 1982

3040-01-130-3182
Rigid Connecting Link

011303182
65410-00015-068: RNCC: 3 | RNVC: 2

19 Apr 1982

3040-01-130-3184
Rigid Connecting Link

011303184
4061T02G01: RNCC: 3 | RNVC: 2
4061T02G01: RNCC: 5 | RNVC: 2
4061T02G01: RNCC: 5 | RNVC: 2
4061T02G01: RNCC: 5 | RNVC: 2
10159285: RNCC: 6 | RNVC: 9
4061T02: RNCC: D | RNVC: 9

19 Apr 1982

3040-01-130-7068
Rigid Connecting Link

011307068
4700-1: RNCC: 3 | RNVC: 2
SR11573A101: RNCC: 5 | RNVC: 9
10106882: RNCC: 6 | RNVC: 9
74J618000-101: RNCC: D | RNVC: 9

28 Apr 1982

3040-01-131-0432
Shouldered Shaft

011310432
65393-04005-102: RNCC: 3 | RNVC: 2
65393-04005-101: RNCC: 5 | RNVC: 9

3 May 1982

3040-01-135-8954
Spur Gearshaft

011358954
65393-04003-101: RNCC: 3 | RNVC: 2

30 Jul 1982

3040-01-136-4415
Rigid Connecting Link

011364415
65410-00015-069: RNCC: 3 | RNVC: 2

8 Aug 1982

3040-01-136-7223
Rod Assembly

011367223
66-4547-11: RNCC: 3 | RNVC: 2

13 Aug 1982

3040-01-137-5735
Shaft Collar

011375735
70400-01434-043: RNCC: 3 | RNVC: 2
70400-01434-042: RNCC: 5 | RNVC: 9

29 Aug 1982

3040-01-138-1841
Friction Lining

011381841
51847882: RNCC: 3 | RNVC: 2
518478-80: RNCC: 5 | RNVC: 9

8 Sep 1982

3040-01-138-1989
Shaft Collar

011381989
4684683 ITEM 1: RNCC: 3 | RNVC: 2
4684683: RNCC: D | RNVC: 9

8 Sep 1982

3040-01-139-5242
Shouldered Shaft

011395242
2046336-1: RNCC: 3 | RNVC: 2
2046336-1: RNCC: 5 | RNVC: 9
10106907: RNCC: 6 | RNVC: 9
2046336: RNCC: D | RNVC: 9

4 Oct 1982

3040-01-139-7061
Pump Shaft

011397061
2493719: RNCC: 3 | RNVC: 2
2493719: RNCC: 5 | RNVC: 2
10159213: RNCC: 6 | RNVC: 9

5 Oct 1982

3040-01-140-6139
Straight Shaft

011406139
87577-3310 ITEM 7: RNCC: 3 | RNVC: 2
609-4676630 ITEM 7: RNCC: 5 | RNVC: 2
609-4676630: RNCC: D | RNVC: 9

14 Oct 1982

3040-01-142-8861
Brake Pulleys Shaft

011428861
74A640009-2003: RNCC: 3 | RNVC: 2

22 Nov 1982

3040-01-143-3383
Counterbalance Weight

011433383
4069T98P08: RNCC: 3 | RNVC: 2

2 Dec 1982

3040-01-141-3235
Rigid Connecting Link

011413235
4674116-0004: RNCC: 3 | RNVC: 2
515-4674116 ITEM 4: RNCC: 5 | RNVC: 2
87552-0608 PC4: RNCC: 5 | RNVC: 2
515-4674116: RNCC: D | RNVC: 9
87552-0608: RNCC: D | RNVC: 9

26 Oct 1982

3040-01-144-7024
Shouldered Shaft

011447024
127270D: RNCC: 3 | RNVC: 2
127270D: RNCC: 5 | RNVC: 9

27 Dec 1982

3040-01-144-4262
Counterbalance Weight

011444262
3039T98P01: RNCC: 3 | RNVC: 2
10158649: RNCC: 6 | RNVC: 9

20 Dec 1982

3040-01-144-8216
Straight Shaft

011448216
105761C: RNCC: 3 | RNVC: 2
105761C: RNCC: 5 | RNVC: 9

30 Dec 1982

3040-01-145-4529
Rigid Connecting Link

011454529
70700-20415-042: RNCC: 3 | RNVC: 2

12 Jan 1983

3040-01-146-5635
Turbine Engine Compressor Stator Arm

011465635
9511M79G01: RNCC: 3 | RNVC: 2
9511M79G01: RNCC: 5 | RNVC: 2
9511M79G01: RNCC: 5 | RNVC: 9

2 Feb 1983

3040-01-147-8019
Body Hub

011478019
7W5697: RNCC: 3 | RNVC: 2
3P0100: RNCC: 5 | RNVC: 9

23 Feb 1983

3040-01-148-8332
Rigid Connecting Link

011488332
4674130-0018: RNCC: 3 | RNVC: 2
515-4674130 ITEM 18: RNCC: D | RNVC: 9

11 Mar 1983

3040-01-149-7444
Shouldered Shaft

011497444
2022976-1-2: RNCC: 3 | RNVC: 2
2022976-1-1: RNCC: 5 | RNVC: 9
16VM003003-9: RNCC: 7 | RNVC: 2

25 Mar 1983

3040-01-149-8295
Shouldered Shaft

011498295
12316785: RNCC: 3 | RNVC: 2

27 Mar 1983

3040-01-150-0407
Straight Shaft

011500407
08679955: RNCC: 3 | RNVC: 2
8626809: RNCC: 5 | RNVC: 9
8626809: RNCC: 5 | RNVC: 9

29 Mar 1983

3040-01-150-2423
Straight Shaft

011502423
2022978-1-2: RNCC: 3 | RNVC: 2
2022978-1-1: RNCC: 5 | RNVC: 9
3040PL0667077: RNCC: 6 | RNVC: 9
3040PL1601290: RNCC: 6 | RNVC: 9
16VM003003-14: RNCC: 7 | RNVC: 2

1 Apr 1983

3040-01-150-6852
Rigid Connecting Link

011506852
65410-00014-076: RNCC: 3 | RNVC: 2

7 Apr 1983

3040-01-149-6738
Shouldered Shaft

011496738
466-021-270: RNCC: 3 | RNVC: 2
292-050-J21: RNCC: C | RNVC: 1

24 Mar 1983

3040-01-154-1247
Straight Shaft

011541247
1348430: RNCC: 3 | RNVC: 2
1348430: RNCC: 5 | RNVC: 9

20 May 1983

3040-01-154-3208
Shouldered Shaft

011543208
68A640096-1001: RNCC: 3 | RNVC: 2

23 May 1983

3040-01-154-2130
Linear Actuating Cylinder Piston

011542130
EAA-8700-90: RNCC: 3 | RNVC: 2
2AN797: RNCC: 5 | RNVC: 9
45A258: RNCC: D | RNVC: 9
EAA-8350: RNCC: D | RNVC: 9

21 May 1983

3040-01-154-6722
Shouldered Shaft

011546722
395291: RNCC: 3 | RNVC: 9
2BC848: RNCC: 5 | RNVC: 2
2BC848: RNCC: 5 | RNVC: 9

29 May 1983

3040-01-155-3205
Rigid Connecting Link

011553205
65C18545-601: RNCC: 3 | RNVC: 2
65C18545-601: RNCC: 5 | RNVC: 2
65C18545-601: RNCC: 5 | RNVC: 9
65C18545-601: RNCC: 5 | RNVC: 9

7 Jun 1983

3040-01-156-9729
Rigid Connecting Link

011569729
14039766: RNCC: 3 | RNVC: 2
14039766: RNCC: 5 | RNVC: 9
14039765: RNCC: D | RNVC: 9

28 Jun 1983

3040-01-158-6910
Control Cam

011586910
26029510: RNCC: 3 | RNVC: 2
26029510: RNCC: 5 | RNVC: 2
7812136: RNCC: 5 | RNVC: 9
26029510: RNCC: 5 | RNVC: 9
7812136: RNCC: 5 | RNVC: 9
7812136: RNCC: 5 | RNVC: 9

27 Jul 1983

3040-01-159-3041
Remote Control Lever

011593041
6P9367: RNCC: 3 | RNVC: 2

5 Aug 1983

3040-01-159-6144
Shouldered Shaft

011596144
709-4684922IT3: RNCC: 3 | RNVC: 2
709-4684922 ITEM 3: RNCC: 5 | RNVC: 2
2031-81: RNCC: 5 | RNVC: 9
34-26-7812: RNCC: 5 | RNVC: 9

11 Aug 1983

3040-01-160-3881
Rigid Connecting Link

011603881
3168996-1: RNCC: 3 | RNVC: 9
3168996: RNCC: 5 | RNVC: 2
3168996-1: RNCC: 5 | RNVC: 9
10106961: RNCC: 6 | RNVC: 9

21 Aug 1983

3040-01-160-8266
Straight Shaft

011608266
907087-30: RNCC: 3 | RNVC: 2
1315150: RNCC: 5 | RNVC: 2
1315150: RNCC: 5 | RNVC: 9
10-82-131-28X: RNCC: C | RNVC: 1

27 Aug 1983

3040-01-161-0248
Remote Control Lever

011610248
037-53908: RNCC: 3 | RNVC: 2

31 Aug 1983

3040-01-163-4364
Straight Shaft

011634364
725506: RNCC: 3 | RNVC: 2

4 Oct 1983

3040-01-163-9608
Rigid Connecting Link

011639608
1168856-1: RNCC: 3 | RNVC: 2
1168856-1: RNCC: 3 | RNVC: 9
1168856-1: RNCC: 5 | RNVC: 2

10 Oct 1983

3040-01-164-0354
Shouldered Shaft

011640354
0858553: RNCC: 3 | RNVC: 2
2AD828: RNCC: 5 | RNVC: 2
009463T: RNCC: 5 | RNVC: 2
2AD828: RNCC: 5 | RNVC: 9

12 Oct 1983

3040-01-165-1020
Rigid Connecting Link

011651020
7-211524001-519: RNCC: 1 | RNVC: 2
7-211524001-519: RNCC: 3 | RNVC: 2
55080-519: RNCC: 5 | RNVC: 9
A-AH64001-519: RNCC: 5 | RNVC: 9
6037-519: RNCC: 5 | RNVC: 9
SR11842A519: RNCC: 5 | RNVC: 9
7-211524001-519: RNCC: 5 | RNVC: 9

26 Oct 1983

3040-01-166-1113
Linear Actuating Cylinder Assembly Parts Kit

011661113
2518494: RNCC: 3 | RNVC: 2
2516155: RNCC: 5 | RNVC: 2
2518494: RNCC: 5 | RNVC: 9
2516155: RNCC: 5 | RNVC: 9

8 Nov 1983

3040-01-166-6425
Remote Control Lever

011666425
10505867: RNCC: 3 | RNVC: 2
973040001: RNCC: 5 | RNVC: 9

15 Nov 1983

3040-01-166-9165
Counterbalance Weight

011669165
7-211412024-9: RNCC: 3 | RNVC: 2
7-211412024-9: RNCC: 3 | RNVC: 9

19 Nov 1983

3040-01-167-0707
Remote Control Lever

011670707
12148-19: RNCC: 3 | RNVC: 9
12248-19: RNCC: 5 | RNVC: 9
12248-19: RNCC: C | RNVC: 1

21 Nov 1983

3040-01-164-3953
Rigid Connecting Link

011643953
7-211515062-5: RNCC: 3 | RNVC: 2
7-211515062-5: RNCC: 5 | RNVC: 9

16 Oct 1983

3040-01-167-7504
Rigid Connecting Link

011677504
70400-22268-041: RNCC: 3 | RNVC: 2
SR11779A: RNCC: 5 | RNVC: 9

4 Dec 1983

3040-01-168-9883
Winch Shaft

011689883
77286: RNCC: 3 | RNVC: 9
217708: RNCC: 5 | RNVC: 2
10512633: RNCC: 5 | RNVC: 2
58958: RNCC: 5 | RNVC: 9
77286: RNCC: 5 | RNVC: 9

30 Dec 1983

3040-01-170-7470
Counterbalance Weight

011707470
7-311422065-7: RNCC: 3 | RNVC: 2
7-311422065-7: RNCC: 5 | RNVC: 9

29 Jan 1984

3040-01-170-9751
Rotating Shaft Eye Bracket

011709751
4Z4306: RNCC: 3 | RNVC: 2
1308620 NO19: RNCC: 5 | RNVC: 2
2AW308: RNCC: 5 | RNVC: 2
474306: RNCC: 5 | RNVC: 9
4Z4306: RNCC: 5 | RNVC: 9
1308620 NO19: RNCC: 5 | RNVC: 9
2AW308: RNCC: 5 | RNVC: 9
1308620: RNCC: D | RNVC: 9

1 Feb 1984

3040-01-171-0917
Counterbalance Weight

011710917
9528M52P03: RNCC: 3 | RNVC: 2
9528M52P03: RNCC: 5 | RNVC: 9
9528M52P03: RNCC: C | RNVC: 1
9528M52P03: RNCC: C | RNVC: 1
9528M52P03: RNCC: C | RNVC: 1

3 Feb 1984

3040-01-171-0922
Counterbalance Weight

011710922
9513M61P03: RNCC: 3 | RNVC: 2

3 Feb 1984

3040-01-171-0087
Nonrotating Shaft Eye Bracket

011710087
12332161: RNCC: 3 | RNVC: 2

1 Feb 1984

3040-01-171-2588
Rigid Connecting Link

011712588
69-11276-505: RNCC: 3 | RNVC: 2
69-11276-501: RNCC: 5 | RNVC: 2

4 Feb 1984

3040-01-171-4858
Shouldered Shaft

011714858
12524073: RNCC: 3 | RNVC: 2
12524073: RNCC: 5 | RNVC: 2
10125896: RNCC: 6 | RNVC: 9

8 Feb 1984

3040-01-172-0257
Counterbalance Weight

011720257
9984M23P01: RNCC: 3 | RNVC: 2
9984M23P01: RNCC: 5 | RNVC: 2
9984M23P01: RNCC: 5 | RNVC: 9

15 Feb 1984

3040-01-172-0255
Counterbalance Weight

011720255
9513M62P05: RNCC: 3 | RNVC: 2

15 Feb 1984

3040-01-172-0789
Linear Actuating Cylinder

011720789
12996642N: RNCC: 3 | RNVC: 2
12996642N: RNCC: 3 | RNVC: 9
P12619601 ITEM 13: RNCC: 5 | RNVC: 2
BOM P12619601 ITEM 13: RNCC: 5 | RNVC: 2
2-00CBL2AT14CX7 300: RNCC: 5 | RNVC: 9
BOM P12619601 ITEM 13: RNCC: 5 | RNVC: 9
P12619601 ITEM 13: RNCC: 5 | RNVC: 9

15 Feb 1984

3040-01-172-7988
Power Lever Shaft

011727988
62395-3: RNCC: 3 | RNVC: 2

25 Feb 1984

3040-01-173-1945
Bell Crank

011731945
9513M34G01: RNCC: 3 | RNVC: 2

3 Mar 1984

3040-01-173-0552
Counterbalance Weight

011730552
1591M11P01: RNCC: 3 | RNVC: 2
9921M54P05: RNCC: 5 | RNVC: 9

29 Feb 1984

3040-01-173-5432
Counterbalance Weight

011735432
9527M79P01: RNCC: 3 | RNVC: 2

7 Mar 1984

3040-01-174-6871
Linear Actuating Cylinder Assembly

011746871
120-117-3: RNCC: 3 | RNVC: 2
120-117-3: RNCC: 5 | RNVC: 2
FA22-P1-45: RNCC: 5 | RNVC: 9
868299: RNCC: 5 | RNVC: 9

21 Mar 1984

3040-01-174-9145
Linear Actuating Cylinder

011749145
1-D900: RNCC: 3 | RNVC: 2

23 Mar 1984

3040-01-175-4232
Rigid Connecting Link

011754232
7030M24G01: RNCC: 3 | RNVC: 2
7030M24G01: RNCC: 5 | RNVC: 2
7030M24G01: RNCC: 5 | RNVC: 2
7030M24G01: RNCC: 5 | RNVC: 2

30 Mar 1984

3040-01-179-9046
Nonrotating Shaft Eye Bracket

011799046
12332923: RNCC: 3 | RNVC: 2
BML65036: RNCC: 5 | RNVC: 9

22 May 1984

3040-01-176-5277
Counterbalance Weight

011765277
751862-1: RNCC: 3 | RNVC: 2

12 Apr 1984

3040-01-176-7590
Counterbalance Weight

011767590
164B8789P4: RNCC: 3 | RNVC: 2
10106462: RNCC: 6 | RNVC: 9

16 Apr 1984

3040-01-180-7410
Linear Actuating Cylinder Assembly

011807410
421-980-100-002: RNCC: 3 | RNVC: 2
11454746-2: RNCC: 5 | RNVC: 2
6680011807410: RNCC: 6 | RNVC: 9
11454746-002: RNCC: 7 | RNVC: 2
11454746: RNCC: D | RNVC: 9

3 Jun 1984

3040-01-182-3700
Shaft Retaining Plate

011823700
014325-1: RNCC: 3 | RNVC: 2
014325-1: RNCC: 5 | RNVC: 9

23 Jun 1984

3040-01-183-2485
Manual Control Lever

011832485
02182700: RNCC: 3 | RNVC: 2
C7-593-000194: RNCC: 5 | RNVC: 2
1664485: RNCC: C | RNVC: 1
2509849: RNCC: C | RNVC: 1
2910119: RNCC: C | RNVC: 1
2910119: RNCC: C | RNVC: 1
4031761: RNCC: C | RNVC: 1
4086381: RNCC: C | RNVC: 1
01167200: RNCC: C | RNVC: 1

4 Jul 1984

3040-01-182-9323
Rigid Connecting Link

011829323
SR10784A-6044: RNCC: 3 | RNVC: 2
7514-6044: RNCC: 3 | RNVC: 2
KSL125700BX-6044: RNCC: 5 | RNVC: 2
7014-115: RNCC: 5 | RNVC: 9
LE162-0002-6044: RNCC: 7 | RNVC: 2

30 Jun 1984

3040-01-183-5053
Shaft Collar

011835053
3251-046: RNCC: 3 | RNVC: 2

7 Jul 1984

3040-01-184-1969
Linear Actuating Cylinder Piston Rod

011841969
B-6602-A: RNCC: 3 | RNVC: 2
C-6602PC1: RNCC: 5 | RNVC: 2

17 Jul 1984

3040-01-184-9883
Linear Actuating Cylinder

011849883
5J0974: RNCC: 3 | RNVC: 2
5J974: RNCC: D | RNVC: 9

24 Jul 1984

3040-01-185-0494
Rigid Connecting Link

011850494
12329218-7: RNCC: 3 | RNVC: 2
10085871: RNCC: 6 | RNVC: 9

25 Jul 1984

3040-01-129-8204
Straight Shaft

011298204
65414-03110-101: RNCC: 3 | RNVC: 2

12 Apr 1982

3040-01-129-8483
Rigid Connecting Link

011298483
65414-03103-044: RNCC: 3 | RNVC: 2

12 Apr 1982

3040-01-129-8484
Rigid Connecting Link

011298484
65662-11214-101: RNCC: 3 | RNVC: 2

12 Apr 1982

3040-01-129-8489
Rigid Connecting Link

011298489
65413-02201-041: RNCC: 3 | RNVC: 2

12 Apr 1982

3040-01-130-2723
Boost Drive Shaft

011302723
2495133: RNCC: 3 | RNVC: 2
2495133: RNCC: 5 | RNVC: 2
10159200: RNCC: 6 | RNVC: 9

19 Apr 1982

3040-01-130-3181
Rigid Connecting Link

011303181
65410-00015-064: RNCC: 3 | RNVC: 2

19 Apr 1982

3040-01-131-0429
Straight Shaft

011310429
65396-00014-105: RNCC: 3 | RNVC: 2
5396-00014-105: RNCC: C | RNVC: 1

3 May 1982

3040-01-131-3307
Linear Actuating Cylinder Piston

011313307
187753-0030: RNCC: 3 | RNVC: 2
281359-0002 MAIN ITEM 30: RNCC: 5 | RNVC: 9
281359-0001: RNCC: D | RNVC: 9

7 May 1982

3040-01-131-4792
Counterbalance Weight

011314792
4055T35P03: RNCC: 3 | RNVC: 2
10158513: RNCC: 6 | RNVC: 9

11 May 1982

3040-01-131-6236
Rigid Connecting Link

011316236
810-4385049-B-52: RNCC: 3 | RNVC: 2
810-4385049 ITEM 52: RNCC: 3 | RNVC: 2
810-4385049 PIECE 52: RNCC: 3 | RNVC: 2
810-4385049: RNCC: D | RNVC: 9

13 May 1982

3040-01-132-5811
Shouldered Shaft

011325811
35-79501-2143-3: RNCC: 3 | RNVC: 2
35-79501-2143-3: RNCC: 5 | RNVC: 1
10106887: RNCC: 6 | RNVC: 9

1 Jun 1982

3040-01-134-6542
Rigid Connecting Link

011346542
12270502: RNCC: 3 | RNVC: 2

7 Jul 1982

3040-01-135-9207
Remote Control Lever

011359207
65411-02423-041: RNCC: 3 | RNVC: 2

30 Jul 1982

3040-01-136-7224
Rod Assembly

011367224
69-47929-1: RNCC: 3 | RNVC: 2
69-47929-1: RNCC: 5 | RNVC: 9

13 Aug 1982

3040-01-137-8372
Rigid Connecting Link

011378372
212-060-724-43: RNCC: 3 | RNVC: 2

2 Sep 1982

3040-01-140-3195
Shouldered Shaft

011403195
74A550677-2003: RNCC: 3 | RNVC: 2
74A550677-2003: RNCC: 5 | RNVC: 9
10106913: RNCC: 6 | RNVC: 9
74A550677: RNCC: D | RNVC: 9

11 Oct 1982

3040-01-140-3237
Spring Shoe

011403237
42312-268: RNCC: 3 | RNVC: 2
42312E268: RNCC: D | RNVC: 9

11 Oct 1982

3040-01-140-4100
Spur Gearshaft

011404100
64351-11098-103: RNCC: 3 | RNVC: 2
64351-11098-102: RNCC: 5 | RNVC: 9

11 Oct 1982

3040-01-140-4186
Rigid Connecting Link

011404186
65414-03104-046: RNCC: 3 | RNVC: 2

11 Oct 1982

3040-01-140-6232
Linear Actuating Cylinder Piston

011406232
035-40835: RNCC: 3 | RNVC: 2
035-40835-Z: RNCC: C | RNVC: 1

14 Oct 1982

3040-01-143-1850
Shouldered Shaft

011431850
6321-0046-01: RNCC: 3 | RNVC: 2
10106926: RNCC: 6 | RNVC: 9

28 Nov 1982

3040-01-143-1314
Shouldered Shaft

011431314
3-P-686: RNCC: 3 | RNVC: 2
802CX545: RNCC: 5 | RNVC: 2
802CX545: RNCC: 5 | RNVC: 9

28 Nov 1982

3040-01-143-3384
Counterbalance Weight

011433384
4069T98P09: RNCC: 3 | RNVC: 2

2 Dec 1982

3040-01-143-4401
Helical Gearshaft

011434401
1W2870: RNCC: 3 | RNVC: 2

3 Dec 1982

3040-01-144-0047
Power Quadrant Lever

011440047
74A800625-A2021: RNCC: 3 | RNVC: 2
74A800625-2021: RNCC: 5 | RNVC: 2

13 Dec 1982

3040-01-146-7541
Counterbalance Weight

011467541
691128-0011: RNCC: 3 | RNVC: 2
691128-11: RNCC: 5 | RNVC: 9

4 Feb 1983

3040-01-147-3002
Shaft Collar

011473002
S-810HC/0463: RNCC: 3 | RNVC: 2
S810HC: RNCC: 3 | RNVC: 2
SG-4505 PIECE 026: RNCC: 5 | RNVC: 2
S-810HC/0461: RNCC: 5 | RNVC: 9
S-810HC/0461: RNCC: 5 | RNVC: 9
S-810HC/0463: RNCC: 5 | RNVC: 9
SG-4505 PIECE 026: RNCC: 5 | RNVC: 9
SG-4505: RNCC: 5 | RNVC: 9
SG-4505: RNCC: D | RNVC: 9

15 Feb 1983

3040-01-147-6412
Straight Shaft

011476412
1P9946: RNCC: 3 | RNVC: 2
CV183366: RNCC: 5 | RNVC: 2
1P-9946: RNCC: 5 | RNVC: 2

19 Feb 1983

3040-01-148-2797
Straight Shaft

011482797
12279044: RNCC: 3 | RNVC: 2
3040011482797: RNCC: 6 | RNVC: 9

3 Mar 1983

3040-01-149-1215
Shaft Collar

011491215
S810GF: RNCC: 3 | RNVC: 2
CS3040-SV-0718: RNCC: 3 | RNVC: 2
SG-4649A PIECE 26: RNCC: 5 | RNVC: 2
S810GF-0463: RNCC: 5 | RNVC: 9
S810GF: RNCC: 5 | RNVC: 9
SG-4649A: RNCC: 5 | RNVC: 9
SG-4649A PIECE 26: RNCC: 5 | RNVC: 9
SG-4649A: RNCC: D | RNVC: 9

15 Mar 1983

3040-01-149-4782
Rigid Connecting Link

011494782
65410-00014-075: RNCC: 3 | RNVC: 2

21 Mar 1983

3040-01-149-8289
Rotating Shaft Eye Bracket

011498289
12316782: RNCC: 3 | RNVC: 2

27 Mar 1983

3040-01-150-0893
Hub Clamp

011500893
20441701E: RNCC: 3 | RNVC: 2
80047-01: RNCC: 5 | RNVC: 9
80047-01C: RNCC: 5 | RNVC: 9

30 Mar 1983

3040-01-149-6706
Straight Shaft

011496706
8679950: RNCC: 3 | RNVC: 2
8624772: RNCC: 5 | RNVC: 9
8624772: RNCC: 5 | RNVC: 9
2520011496706: RNCC: 6 | RNVC: 9

24 Mar 1983

3040-01-151-5636
Straight Shaft

011515636
87832-1638 ITEM 32: RNCC: 3 | RNVC: 2
709-4684909 ITEM 32: RNCC: 5 | RNVC: 2
87832-163 ITEM 32: RNCC: 5 | RNVC: 9
709-4684909: RNCC: D | RNVC: 9
87832-1638: RNCC: D | RNVC: 9

19 Apr 1983

3040-01-151-3041
Interlock Switch Shaft

011513041
47P226367-21-11: RNCC: 3 | RNVC: 2

16 Apr 1983

3040-01-153-0740
Rigid Connecting Link

011530740
65410-00014-066: RNCC: 3 | RNVC: 2

12 May 1983

3040-01-153-1667
Rigid Connecting Link

011531667
65414-03104-044: RNCC: 3 | RNVC: 2

13 May 1983

3040-01-154-2845
Straight Shaft

011542845
DS-935700: RNCC: 3 | RNVC: 2
DS-935700: RNCC: 5 | RNVC: 2
5804: RNCC: 5 | RNVC: 9
5804: RNCC: 5 | RNVC: 9

23 May 1983

3040-01-155-5152
Linear Actuating Cylinder Cap

011555152
3040A0002: RNCC: 3 | RNVC: 2
7J9888: RNCC: 5 | RNVC: 9

10 Jun 1983

3040-01-155-6101
Bevel Gearshaft

011556101
60-427-0019-2: RNCC: 3 | RNVC: 2
01-403-0035-4 PIECE 101: RNCC: C | RNVC: 1
01-446-0018-2 PIECE 1: RNCC: C | RNVC: 1

13 Jun 1983

3040-01-156-4707
Counterbalance Weight

011564707
34026395-007: RNCC: 3 | RNVC: 2

21 Jun 1983

3040-01-156-4702
Counterbalance Weight

011564702
34026395-002: RNCC: 3 | RNVC: 2

21 Jun 1983

3040-01-156-4026
Counterbalance Weight

011564026
34026395-140: RNCC: 3 | RNVC: 2
34026395-140: RNCC: 5 | RNVC: 9

20 Jun 1983

3040-01-156-0828
Flap Shaft Assembly

011560828
2022616-9-2: RNCC: 3 | RNVC: 2
2022616-9-2: RNCC: 5 | RNVC: 9
10318123: RNCC: 6 | RNVC: 9
02022616-9-2: RNCC: C | RNVC: 1

19 Jun 1983

3040-01-156-7233
Manual Control Lever

011567233
22510143: RNCC: 3 | RNVC: 2
22510143: RNCC: 5 | RNVC: 9
22510142: RNCC: D | RNVC: 9

23 Jun 1983

3040-01-156-8221
Shouldered Shaft

011568221
032564: RNCC: 3 | RNVC: 9
20685: RNCC: 5 | RNVC: 9
032564: RNCC: 5 | RNVC: 9

25 Jun 1983

3040-01-155-0106
Shouldered Shaft

011550106
13204E2973: RNCC: 3 | RNVC: 2

4 Jun 1983

3040-01-157-5248
Hub Clamp

011575248
998571-1: RNCC: 3 | RNVC: 2
998571-1: RNCC: 5 | RNVC: 2
998571-1: RNCC: 5 | RNVC: 9

7 Jul 1983

3040-01-157-8021
Pawl

011578021
5713268: RNCC: 3 | RNVC: 2
5713268: RNCC: 5 | RNVC: 9

12 Jul 1983

3040-01-157-8627
Engine Adapter Brake

011578627
74D291013-2037: RNCC: 3 | RNVC: 2

13 Jul 1983

3040-01-157-8712
Counterbalance Weight

011578712
4075T14P01: RNCC: 3 | RNVC: 2
10106954: RNCC: 6 | RNVC: 9

13 Jul 1983

3040-01-160-3534
Rigid Connecting Link

011603534
206-010-793-101: RNCC: 3 | RNVC: 2
206-010-793-101: RNCC: 5 | RNVC: 2
206-010-793-101: RNCC: 5 | RNVC: 2
AM2003-DHS: RNCC: 5 | RNVC: 9
KRD4-12: RNCC: 5 | RNVC: 9

20 Aug 1983

3040-01-158-7556
Shaft Retaining Plate

011587556
02-23-00120-150: RNCC: 3 | RNVC: 2
2AG607: RNCC: 5 | RNVC: 9

27 Jul 1983

3040-01-161-2706
Straight Shaft

011612706
4031910-0001: RNCC: 3 | RNVC: 2
4031910: RNCC: D | RNVC: 9

3 Sep 1983

3040-01-161-5898
Linear Actuating Cylinder Assembly

011615898
B-6459: RNCC: 3 | RNVC: 2
7M717-1: RNCC: 3 | RNVC: 2

7 Sep 1983

3040-01-161-7653
Shaft Retaining Plate

011617653
10510903: RNCC: 3 | RNVC: 2

10 Sep 1983

3040-01-161-8187
Extension Shaft

011618187
74A733565-2013: RNCC: 3 | RNVC: 2
3929AS812-4: RNCC: 3 | RNVC: 2
74A733565-2013: RNCC: 5 | RNVC: 2
74A733565-2013: RNCC: 5 | RNVC: 9
74A733565-2013: RNCC: 5 | RNVC: 9
10117853: RNCC: 6 | RNVC: 9
74A733565-2013: RNCC: C | RNVC: 1

11 Sep 1983

3040-01-161-8349
Rigid Connecting Link

011618349
2012A74: RNCC: 3 | RNVC: 2
2012A74: RNCC: 5 | RNVC: 2
2012A74: RNCC: 5 | RNVC: 2

11 Sep 1983

3040-01-161-9988
Shaft Retaining Plate

011619988
403999-20M: RNCC: 3 | RNVC: 2
403999-20M: RNCC: 3 | RNVC: 9

13 Sep 1983

3040-01-162-4623
Shouldered Shaft

011624623
200886669: RNCC: 3 | RNVC: 2

18 Sep 1983

3040-01-162-1045
Manual Control Lever

011621045
68A582042-2003: RNCC: 3 | RNVC: 2

14 Sep 1983

3040-01-163-3590
Shaft Retaining Plate

011633590
LP-HC39-3: RNCC: 3 | RNVC: 2
LP-HC39-3: RNCC: 5 | RNVC: 2
LPHC39-3: RNCC: 5 | RNVC: 2
MA207-22326: RNCC: 5 | RNVC: 2
10553434: RNCC: 5 | RNVC: 2

1 Oct 1983

3040-01-163-6340
Counterbalance Weight

011636340
AS44521070: RNCC: 3 | RNVC: 2
2301013: RNCC: 5 | RNVC: 2
AS44521-070: RNCC: C | RNVC: 1

6 Oct 1983

3040-01-163-6341
Counterbalance Weight

011636341
AS44521-020: RNCC: 3 | RNVC: 2

6 Oct 1983

3040-01-166-4759
Special Shouldered Shaft

011664759
65720-70013-122: RNCC: 3 | RNVC: 2

12 Nov 1983

3040-01-166-9167
Counterbalance Weight

011669167
7-211412024-13: RNCC: 3 | RNVC: 2
7-211412024-13: RNCC: 5 | RNVC: 9

19 Nov 1983

3040-01-165-5548
Rigid Connecting Link

011655548
70106-08111-101: RNCC: 3 | RNVC: 2
70106-08111: RNCC: D | RNVC: 9

31 Oct 1983

3040-01-167-4443
Circle Guide Shoe

011674443
3192228: RNCC: 3 | RNVC: 2
6G4526: RNCC: 5 | RNVC: 9

29 Nov 1983

3040-01-167-9608
Linear Actuating Cylinder Assembly

011679608
11801: RNCC: 3 | RNVC: 2
000-25-1313: RNCC: 5 | RNVC: 9

8 Dec 1983

3040-01-169-1989
Nonrotating Shaft Eye Bracket

011691989
L104717: RNCC: 3 | RNVC: 2

4 Jan 1984

3040-01-169-3751
Straight Shaft

011693751
15810: RNCC: 3 | RNVC: 2

7 Jan 1984

3040-01-169-3749
Straight Shaft

011693749
15730: RNCC: 3 | RNVC: 2

7 Jan 1984

3040-01-170-7897
Shouldered Shaft

011707897
75A613652-2001: RNCC: 3 | RNVC: 2
75A613652-2001: RNCC: 5 | RNVC: 2
75A613652-2001: RNCC: 5 | RNVC: 9

29 Jan 1984

3040-01-171-0920
Counterbalance Weight

011710920
9513M62P06: RNCC: 3 | RNVC: 2
9513M62P06: RNCC: 5 | RNVC: 9
9513M63P06: RNCC: 5 | RNVC: 9
9513M62P06: RNCC: C | RNVC: 1

3 Feb 1984

3040-01-171-1021
Bell Crank

011711021
9511M24P06: RNCC: 3 | RNVC: 2

3 Feb 1984

3040-01-171-2355
Shaft Collar

011712355
12322556: RNCC: 3 | RNVC: 2

4 Feb 1984

3040-01-171-2803
Bell Crank

011712803
9511M26P02: RNCC: 3 | RNVC: 2

4 Feb 1984

3040-01-171-8541
Rigid Connecting Link

011718541
11453498: RNCC: 3 | RNVC: 2

15 Feb 1984

3040-01-172-8286
Control Cam

011728286
N-19110-K7215: RNCC: 3 | RNVC: 2
N-19110-K7215: RNCC: 5 | RNVC: 2
N-19100-K7215: RNCC: 5 | RNVC: 9
N-19110-K7215: RNCC: 5 | RNVC: 9
19110-K7215: RNCC: 5 | RNVC: 9

25 Feb 1984

3040-01-173-2141
Rigid Connecting Link

011732141
7-211524001-11: RNCC: 1 | RNVC: 2
55080-11: RNCC: 3 | RNVC: 2
SR11842A11: RNCC: 3 | RNVC: 2
6025-1: RNCC: 3 | RNVC: 2
A-AH64001-11: RNCC: 5 | RNVC: 2
7-211524001-11: RNCC: 5 | RNVC: 9

3 Mar 1984

3040-01-173-5431
Counterbalance Weight

011735431
9527M79P02: RNCC: 3 | RNVC: 2

7 Mar 1984

3040-01-174-6002
Nonrotating Shaft Eye Bracket

011746002
6G4939: RNCC: 3 | RNVC: 2

21 Mar 1984

3040-01-175-3377
Rigid Connecting Link

011753377
2531621: RNCC: 3 | RNVC: 2

30 Mar 1984

3040-01-176-9268
Body Hub

011769268
75-1105-1: RNCC: 3 | RNVC: 2

17 Apr 1984

3040-01-178-5505
Linear Actuating Cylinder

011785505
12322520: RNCC: 3 | RNVC: 2
12322520: RNCC: 5 | RNVC: 9

7 May 1984

3040-01-179-1345
Remote Control Lever

011791345
13214E2146: RNCC: 3 | RNVC: 2
13214E2146: RNCC: 3 | RNVC: 2

16 May 1984

3040-01-179-5795
Rigid Connecting Link

011795795
13214E2536-1: RNCC: 3 | RNVC: 2
13214E2536-1: RNCC: 5 | RNVC: 2
13214E2536: RNCC: D | RNVC: 9

19 May 1984

3040-01-179-9210
Straight Shaft

011799210
12325792: RNCC: 3 | RNVC: 2
13211E8617: RNCC: 5 | RNVC: 9

22 May 1984

3040-01-179-9700
Nonrotating Shaft Eye Bracket

011799700
12336974: RNCC: 3 | RNVC: 2

23 May 1984

3040-01-180-2678
Engaging Drive Shaft

011802678
P309647: RNCC: 3 | RNVC: 2
P309647: RNCC: 3 | RNVC: 9

25 May 1984

3040-01-180-4895
Straight Shaft

011804895
300-4684425 ITEM 9: RNCC: 3 | RNVC: 2
87774-3601: RNCC: 5 | RNVC: 9
300-4684425: RNCC: D | RNVC: 9

29 May 1984

3040-01-181-0147
Shouldered Shaft

011810147
32-650-4928: RNCC: 3 | RNVC: 2

6 Jun 1984

3040-01-181-1272
Control Cam

011811272
707359-1: RNCC: 3 | RNVC: 2
707359-1: RNCC: 5 | RNVC: 9

6 Jun 1984

3040-01-181-0306
Rigid Connecting Link

011810306
13214E2536-2: RNCC: 3 | RNVC: 2
13214E2536-2: RNCC: 5 | RNVC: 2
13214E2536: RNCC: D | RNVC: 9

6 Jun 1984

3040-01-181-6431
Straight Shaft

011816431
8355949: RNCC: 3 | RNVC: 2
8355949: RNCC: 5 | RNVC: 2

13 Jun 1984

3040-01-181-6488
Body Hub

011816488
13215E6650: RNCC: 3 | RNVC: 2
13215E6650: RNCC: 5 | RNVC: 2

13 Jun 1984

3040-01-181-6312
Governor Shaft

011816312
360520: RNCC: 3 | RNVC: 2

13 Jun 1984

3040-01-182-4351
Straight Shaft

011824351
7-217236309: RNCC: 3 | RNVC: 2
7-217236309: RNCC: 5 | RNVC: 9

23 Jun 1984

3040-01-183-0536
Shaft Retaining Plate

011830536
014412-1: RNCC: 3 | RNVC: 2
014412-1: RNCC: 5 | RNVC: 9

1 Jul 1984

3040-01-182-9933
Straight Shaft Assembly

011829933
2195045-2: RNCC: 3 | RNVC: 2
2195045-2: RNCC: 5 | RNVC: 1
2195045-2: RNCC: 5 | RNVC: 9

1 Jul 1984

3040-01-183-8481
Control Cam

011838481
12335146: RNCC: 3 | RNVC: 2

11 Jul 1984

3040-01-184-3948
Pushrod Assembly

011843948
123L10012-602: RNCC: 3 | RNVC: 2
123L10012-602B: RNCC: 5 | RNVC: 1
123L10012-602: RNCC: 5 | RNVC: 2
123L10012-602: RNCC: 5 | RNVC: 9
123L10012-4: RNCC: C | RNVC: 1
123L10012-602: RNCC: C | RNVC: 1

18 Jul 1984

3040-01-184-7562
Rigid Connecting Link

011847562
406-001-023-119: RNCC: 3 | RNVC: 2

23 Jul 1984

3040-01-184-7561
Rigid Connecting Link

011847561
406-001-023-113: RNCC: 3 | RNVC: 2

23 Jul 1984

3040-01-184-9484
Shouldered Shaft

011849484
6532C407-1: RNCC: 3 | RNVC: 2
6532C407-1: RNCC: C | RNVC: 1

24 Jul 1984

3040-01-184-9480
Shouldered Shaft

011849480
75A607239-2001: RNCC: 3 | RNVC: 9
75A607239-2001: RNCC: 5 | RNVC: 2
75A607239-2001: RNCC: C | RNVC: 1

24 Jul 1984

3040-01-184-8719
Spur Gearshaft

011848719
42357-37: RNCC: 3 | RNVC: 2

24 Jul 1984

3040-01-185-4388
Body Hub

011854388
12338442-1: RNCC: 3 | RNVC: 2
5577813: RNCC: 5 | RNVC: 2
5577813-B: RNCC: 5 | RNVC: 2
12338442: RNCC: 5 | RNVC: 9
2520011854388: RNCC: 6 | RNVC: 9

29 Jul 1984

3040-01-158-6915
Manual Control Lever

011586915
6V1518: RNCC: 3 | RNVC: 2
6V1517: RNCC: 5 | RNVC: 9

27 Jul 1983

3040-01-160-6485
Mechanical Drive Housing

011606485
730983: RNCC: 3 | RNVC: 2

24 Aug 1983

3040-01-159-4597
Bell Crank Support

011594597
70400-02128-045: RNCC: 1 | RNVC: 2
70400-02128-045: RNCC: 3 | RNVC: 2
70400-02128-045: RNCC: 5 | RNVC: 2
3040PL1950895: RNCC: 6 | RNVC: 9
70400-02128-043: RNCC: E | RNVC: 8

9 Aug 1983

3040-01-165-1066
Counterbalance Weight

011651066
7-211412024-5: RNCC: 3 | RNVC: 2
7-211412024-5: RNCC: 3 | RNVC: 9

26 Oct 1983

3040-01-165-1479
Shouldered Shaft

011651479
81161-A: RNCC: 3 | RNVC: 9
D-254-9 PIECE 1: RNCC: 5 | RNVC: 9
81161-A: RNCC: C | RNVC: 1
D-254-9: RNCC: D | RNVC: 9

26 Oct 1983

3040-01-169-1128
Shouldered Shaft

011691128
2526766: RNCC: 3 | RNVC: 2
2526766: RNCC: 3 | RNVC: 2

4 Jan 1984

3040-01-179-9219
Shouldered Shaft

011799219
12332233: RNCC: 3 | RNVC: 2
13204E3694: RNCC: 5 | RNVC: 9

22 May 1984

3040-01-180-0675
Rigid Connecting Link

011800675
P412450: RNCC: 3 | RNVC: 2
P412450: RNCC: 3 | RNVC: 9

24 May 1984

3040-01-129-8485
Rigid Connecting Link

011298485
65662-11217-103: RNCC: 3 | RNVC: 2

12 Apr 1982

3040-01-130-1477
Ball Joint

011301477
11005: RNCC: 3 | RNVC: 9
13226E0378: RNCC: 5 | RNVC: 2
206107: RNCC: 5 | RNVC: 2
SP1666: RNCC: 5 | RNVC: 9
HSPF8-8P: RNCC: 5 | RNVC: 9
206107: RNCC: 5 | RNVC: 9
13226E0378: RNCC: 5 | RNVC: 9

17 Apr 1982

3040-01-130-2809
Bell Crank Support

011302809
65415-11351-042: RNCC: 3 | RNVC: 2

19 Apr 1982

3040-01-130-5543
Cylinder Seal Parts Kit

011305543
170-ES006-400: RNCC: 3 | RNVC: 9
160-ES006-400: RNCC: 5 | RNVC: 9

28 Apr 1982

3040-01-130-7931
Shaft Retaining Plate

011307931
12277149: RNCC: 3 | RNVC: 2

28 Apr 1982

3040-01-131-0291
Rotating Shaft Eye Bracket

011310291
8267800: RNCC: 3 | RNVC: 2

2 May 1982

3040-01-131-5788
Shouldered Shaft

011315788
845-4775959 ITEM 20: RNCC: 3 | RNVC: 2
845-4687756: RNCC: 5 | RNVC: 9
845-4687756 ITEM 22: RNCC: 5 | RNVC: 9
2642-982-03 ITEM 20: RNCC: 5 | RNVC: 9

13 May 1982

3040-01-131-0269
Shouldered Shaft

011310269
87776-0107 ITEM 7: RNCC: 3 | RNVC: 2
201-4684482 ITEM 7: RNCC: 5 | RNVC: 2
87776-0107 ITEM 7: RNCC: 5 | RNVC: 9
201-4684482: RNCC: D | RNVC: 9
87776-0107: RNCC: D | RNVC: 9

2 May 1982

3040-01-133-8012
Linear Actuating Cylinder Assembly

011338012
E15-20SX1-1050-T3SS: RNCC: 3 | RNVC: 2
K-500-0216: RNCC: 5 | RNVC: 9

22 Jun 1982

3040-01-133-7893
Shouldered Shaft

011337893
706386: RNCC: 3 | RNVC: 2

22 Jun 1982

3040-01-133-4075
Operating Shaft

011334075
62566: RNCC: 3 | RNVC: 9
X74221 PIECE 10: RNCC: 5 | RNVC: 9

13 Jun 1982

3040-01-135-0292
Spur Gearshaft

011350292
1490047-0010: RNCC: 3 | RNVC: 2

16 Jul 1982

3040-01-134-8909
Rigid Connecting Link

011348909
A2244-U-21: RNCC: 3 | RNVC: 2
A2244-U-21: RNCC: 5 | RNVC: 9

13 Jul 1982

3040-01-135-1353
Shouldered Shaft

011351353
64358-07043-103: RNCC: 3 | RNVC: 2
64358-07043-103: RNCC: 5 | RNVC: 9

18 Jul 1982

3040-01-135-3159
Manual Control Lever

011353159
CL450VTC: RNCC: 3 | RNVC: 2

21 Jul 1982

3040-01-135-5693
Linear Actuating Cylinder

011355693
803-4385051-A-026: RNCC: 3 | RNVC: 2
803-4385051: RNCC: D | RNVC: 9

27 Jul 1982

3040-01-135-5795
Bell Crank

011355795
1847-115-01: RNCC: 3 | RNVC: 2
1847-115-01: RNCC: 5 | RNVC: 9
D114740-1: RNCC: 5 | RNVC: 9

27 Jul 1982

3040-01-136-1207
Rigid Connecting Link

011361207
12307408: RNCC: 3 | RNVC: 2

4 Aug 1982

3040-01-136-1208
Remote Control Lever

011361208
12307593: RNCC: 3 | RNVC: 2

4 Aug 1982

3040-01-136-7824
Shouldered Shaft

011367824
182080-1: RNCC: 3 | RNVC: 2
10106897: RNCC: 6 | RNVC: 9

15 Aug 1982

3040-01-136-8777
Centrifugal Purifier Shaft

011368777
870318201: RNCC: 3 | RNVC: 2

17 Aug 1982

3040-01-136-8776
Idler Shaft

011368776
8703181-02: RNCC: 3 | RNVC: 2
E-8709935 PIECE 189: RNCC: 5 | RNVC: 2

17 Aug 1982

3040-01-137-3320
Straight Shaft

011373320
33012013: RNCC: 3 | RNVC: 2
214432: RNCC: 5 | RNVC: 2

25 Aug 1982

3040-01-138-3076
Hydraulic Accumulator Piston Rod

011383076
4687550-PC-27: RNCC: 3 | RNVC: 2
2642-693-03-PC27: RNCC: 3 | RNVC: 2
4687550-0027: RNCC: 5 | RNVC: 9

9 Sep 1982

3040-01-139-4373
Inertia Damper

011394373
5793758PC1: RNCC: 3 | RNVC: 2
BP9099: RNCC: 5 | RNVC: 2
707375-K1: RNCC: 5 | RNVC: 2
A-1710: RNCC: 5 | RNVC: 9

1 Oct 1982

3040-01-140-0264
Rigid Connecting Link

011400264
4715-1: RNCC: 3 | RNVC: 2
74J668000-109: RNCC: 5 | RNVC: 2
SR11574A109: RNCC: 5 | RNVC: 9
10106908: RNCC: 6 | RNVC: 9

7 Oct 1982

3040-01-140-0266
Rigid Connecting Link

011400266
74A450913-2003: RNCC: 3 | RNVC: 2
74A450913-2003: RNCC: 5 | RNVC: 2
74A450913-2003: RNCC: 5 | RNVC: 2
74A450913-2003: RNCC: 5 | RNVC: 2
74A450913-2003: RNCC: 5 | RNVC: 9
74A450913-2003: RNCC: 5 | RNVC: 9
74A450913-2003: RNCC: 5 | RNVC: 9
74A450913-2003: RNCC: 5 | RNVC: 9
74A450913-2003: RNCC: 5 | RNVC: 9
74A450913-2003: RNCC: 5 | RNVC: 9

7 Oct 1982

3040-01-140-7646
Drive Assembly Shaft

011407646
1587269-8: RNCC: 3 | RNVC: 2
1587269-8: RNCC: 5 | RNVC: 2
1587269-8: RNCC: 5 | RNVC: 9
1587269-8: RNCC: 5 | RNVC: 9

18 Oct 1982

3040-01-141-2848
Shouldered Shaft

011412848
182128-1: RNCC: 3 | RNVC: 2
182128-1: RNCC: 5 | RNVC: 2
10106921: RNCC: 6 | RNVC: 9
182128: RNCC: D | RNVC: 9

26 Oct 1982

3040-01-142-9051
Bell Crank

011429051
65414-03104-054: RNCC: 3 | RNVC: 2

22 Nov 1982

3040-01-143-3375
Counterbalance Weight

011433375
4069T98P07: RNCC: 3 | RNVC: 2

2 Dec 1982

3040-01-143-4173
Valve Shaft

011434173
19160400: RNCC: 3 | RNVC: 2
191604: RNCC: 5 | RNVC: 9

3 Dec 1982

3040-01-144-4064
Shaft Assembly

011444064
65664-03042-042: RNCC: 3 | RNVC: 2

20 Dec 1982

3040-01-144-8219
Shouldered Shaft

011448219
127268D: RNCC: 3 | RNVC: 2
127268D: RNCC: 5 | RNVC: 9

30 Dec 1982

3040-01-145-9748
Drive Shaft

011459748
5540844: RNCC: 3 | RNVC: 2
10386394: RNCC: 6 | RNVC: 9

21 Jan 1983

3040-01-146-5292
Linear Actuating Cylinder

011465292
13211E3119-2: RNCC: 3 | RNVC: 2

2 Feb 1983

3040-01-146-1039
Rigid Connecting Link

011461039
179599-A: RNCC: 3 | RNVC: 2

24 Jan 1983

3040-01-147-6465
Mechanical Drive Housing

011476465
1W6810: RNCC: 3 | RNVC: 2
HSA005355: RNCC: 5 | RNVC: 2

19 Feb 1983

3040-01-148-2184
Rigid Connecting Link

011482184
65410-00014-047: RNCC: 3 | RNVC: 2

2 Mar 1983

3040-01-148-1544
Shouldered Shaft

011481544
74A640007-2003: RNCC: 3 | RNVC: 2
10106937: RNCC: 6 | RNVC: 9

1 Mar 1983

3040-01-148-2869
Manual Control Lever

011482869
20327-1100: RNCC: 3 | RNVC: 2
20327-001 FIND 14: RNCC: 5 | RNVC: 9
20327-001: RNCC: D | RNVC: 9

3 Mar 1983

3040-01-149-6741
Shouldered Shaft

011496741
292050J24: RNCC: 3 | RNVC: 9
11V-102-S25: RNCC: 5 | RNVC: 9
465-060-230: RNCC: 5 | RNVC: 9
292050J24: RNCC: 5 | RNVC: 9
292050J24: RNCC: C | RNVC: 1
292050J24: RNCC: C | RNVC: 1

24 Mar 1983

3040-01-150-2250
Oil Pump Coupling

011502250
200059-001: RNCC: 3 | RNVC: 2
CB-200059-001: RNCC: 3 | RNVC: 2
CB-200059-001: RNCC: 5 | RNVC: 9
LB-422: RNCC: 5 | RNVC: 9
CB-200059-001: RNCC: 5 | RNVC: 9
422-001: RNCC: C | RNVC: 1

1 Apr 1983

3040-01-150-1750
Linear Actuating Cylinder Piston

011501750
2585649: RNCC: 3 | RNVC: 2
2585649: RNCC: 5 | RNVC: 9

31 Mar 1983

3040-01-151-8037
Air Motor Shaft

011518037
VSM-4530: RNCC: 3 | RNVC: 2

22 Apr 1983

3040-01-152-9331
Bell Crank

011529331
65414-03106-041: RNCC: 3 | RNVC: 2

10 May 1983

3040-01-153-8401
Manual Control Lever

011538401
1320360: RNCC: 3 | RNVC: 2
1320360: RNCC: 5 | RNVC: 9

17 May 1983

3040-01-154-2128
Manual Control Lever

011542128
245101N: RNCC: 3 | RNVC: 2
245101: RNCC: 3 | RNVC: 9
650CX70: RNCC: 5 | RNVC: 2
650CX70: RNCC: 5 | RNVC: 9

21 May 1983

3040-01-154-9927
Rigid Connecting Link

011549927
65410-00023-041: RNCC: 3 | RNVC: 2

3 Jun 1983

3040-01-156-0727
Extension Shaft

011560727
74A630030-2001: RNCC: 3 | RNVC: 2

19 Jun 1983

3040-01-156-8106
Shouldered Shaft

011568106
13214E2673: RNCC: 3 | RNVC: 2

24 Jun 1983

3040-01-158-6095
Rigid Connecting Link

011586095
70400-02232-048: RNCC: 3 | RNVC: 2
3040PL1951305: RNCC: 6 | RNVC: 9

25 Jul 1983

3040-01-158-6089
Bell Crank

011586089
70400-02502-046: RNCC: 3 | RNVC: 2

25 Jul 1983

3040-01-158-8474
Straight Shaft

011588474
2BA25: RNCC: 3 | RNVC: 2
1427-585179: RNCC: 5 | RNVC: 2
2BA25: RNCC: 5 | RNVC: 9
1427-585179: RNCC: 5 | RNVC: 9
F421: RNCC: D | RNVC: 9

30 Jul 1983

3040-01-159-0993
Flexible Shaft Assembly Casing

011590993
3V417: RNCC: 3 | RNVC: 2

3 Aug 1983

3040-01-159-1447
Worm Shaft

011591447
SK3806-11: RNCC: 3 | RNVC: 2
SK3806-11: RNCC: 5 | RNVC: 2

3 Aug 1983

3040-01-159-2728
Power Take-Off Ball Joint Assembly

011592728
150-1603: RNCC: 3 | RNVC: 2
150-1627: RNCC: 5 | RNVC: 9
1501627: RNCC: 5 | RNVC: 9
147-0383: RNCC: 5 | RNVC: 9

5 Aug 1983

3040-01-159-8860
Rigid Connecting Link

011598860
74A800617-2005: RNCC: 3 | RNVC: 2
74A800617-2005: RNCC: 5 | RNVC: 9
10106958: RNCC: 6 | RNVC: 9
74A800617: RNCC: D | RNVC: 9

14 Aug 1983

3040-01-160-1535
Shouldered Shaft

011601535
7837321: RNCC: 3 | RNVC: 2
3815961: RNCC: 3 | RNVC: 2
7837321: RNCC: 5 | RNVC: 2
7837321: RNCC: 5 | RNVC: 9
7837321: RNCC: 5 | RNVC: 9

18 Aug 1983

3040-01-160-3928
Linear Actuating Cylinder

011603928
13225E8187: RNCC: 3 | RNVC: 2
13225E8187: RNCC: 5 | RNVC: 9

21 Aug 1983

3040-01-160-9450
Rigid Connecting Link

011609450
65C18248-611: RNCC: 3 | RNVC: 2
65C18248-611: RNCC: 5 | RNVC: 9

29 Aug 1983

3040-01-161-0060
Pawl

011610060
9922.0321: RNCC: 3 | RNVC: 2
2BA600: RNCC: 5 | RNVC: 2
2BA600: RNCC: 5 | RNVC: 9
617G-ISO-8-8: RNCC: 5 | RNVC: 9
ISO-8-8: RNCC: 5 | RNVC: 9

31 Aug 1983

3040-01-162-9347
Steering Input Shaft

011629347
200886711: RNCC: 3 | RNVC: 2

25 Sep 1983

3040-01-163-1829
Push-Pull Control Assembly

011631829
C81320-2: RNCC: 3 | RNVC: 2

28 Sep 1983

3040-01-163-6068
Counterbalance Weight

011636068
579-1006-32: RNCC: 3 | RNVC: 2
10163654: RNCC: 6 | RNVC: 9

5 Oct 1983

3040-01-164-3287
Shaft Retaining Plate

011643287
13174032: RNCC: 3 | RNVC: 9
10505041: RNCC: 5 | RNVC: 2
3211-P-5684S: RNCC: 5 | RNVC: 9

14 Oct 1983

3040-01-164-4575
Straight Shaft

011644575
2D2-208 ITEM 13: RNCC: 3 | RNVC: 2
2B1-978: RNCC: 5 | RNVC: 2

17 Oct 1983

3040-01-164-4036
Shouldered Shaft

011644036
200886677: RNCC: 3 | RNVC: 2

16 Oct 1983

3040-01-164-5874
Rigid Connecting Link

011645874
7-211515057: RNCC: 3 | RNVC: 2
7-211515057: RNCC: 5 | RNVC: 9

19 Oct 1983

3040-01-165-4408
Shouldered Shaft

011654408
2D2-208 ITEM 5: RNCC: 3 | RNVC: 2
2B1-982: RNCC: 5 | RNVC: 2

28 Oct 1983

3040-01-164-9277
Rigid Connecting Link

011649277
XA-11992-RP: RNCC: 3 | RNVC: 2
XA - 3528: RNCC: 5 | RNVC: 9
XA3528: RNCC: 5 | RNVC: 9
XA3528: RNCC: 5 | RNVC: 9

22 Oct 1983

3040-01-167-0636
Connecting Shaft

011670636
SYLC990: RNCC: 3 | RNVC: 2

21 Nov 1983

3040-01-167-7201
Remote Control Lever

011677201
7V1881: RNCC: 3 | RNVC: 2

3 Dec 1983

3040-01-167-9212
Linear Actuating Cylinder Piston

011679212
3382-2: RNCC: 3 | RNVC: 2
3382-2: RNCC: 5 | RNVC: 2
3382-2: RNCC: 5 | RNVC: 2
3382 PIECE 2: RNCC: 5 | RNVC: 2
3382: RNCC: D | RNVC: 9

8 Dec 1983

3040-01-169-4910
Straight Shaft

011694910
16466-2: RNCC: 3 | RNVC: 2

10 Jan 1984

3040-01-169-7388
Manual Control Lever

011697388
02324400: RNCC: 3 | RNVC: 2
LA-889-8: RNCC: 5 | RNVC: 2
LA-889-8: RNCC: 5 | RNVC: 9
02183400: RNCC: 5 | RNVC: 9

13 Jan 1984

3040-01-171-0143
Mechanical Drive Housing

011710143
13211E8701: RNCC: 3 | RNVC: 2

1 Feb 1984

3040-01-171-0919
Counterbalance Weight

011710919
9513M60P02: RNCC: 3 | RNVC: 2

3 Feb 1984

3040-01-171-0924
Counterbalance Weight

011710924
9513M62P04: RNCC: 3 | RNVC: 2
9513M62P04: RNCC: 5 | RNVC: 9
9513M62P04: RNCC: 5 | RNVC: 9
9513M62P04: RNCC: C | RNVC: 1

3 Feb 1984

3040-01-171-6796
Linear Actuating Cylinder Piston Rod

011716796
KK048229AA PIECE 37: RNCC: 3 | RNVC: 2
8001518200: RNCC: 5 | RNVC: 9

11 Feb 1984

3040-01-172-5990
Straight Shaft

011725990
709-4684860 ITEM 16: RNCC: 3 | RNVC: 2
87832-0320 ITEM 16: RNCC: 5 | RNVC: 2

22 Feb 1984

3040-01-172-7929
Rigid Connecting Link

011727929
12328980: RNCC: 3 | RNVC: 2

25 Feb 1984

3040-01-172-9205
Special Connecting Link

011729205
5046T97P02: RNCC: 1 | RNVC: 2
ALK4-130: RNCC: 3 | RNVC: 2
5046T97: RNCC: D | RNVC: 9

28 Feb 1984

3040-01-172-9459
Rigid Connecting Link

011729459
2012A91: RNCC: 3 | RNVC: 2
2012A91: RNCC: 7 | RNVC: 9
2012A91: RNCC: C | RNVC: 1

28 Feb 1984

3040-01-173-5853
Brake Disc

011735853
5002627: RNCC: 3 | RNVC: 2
5002627: RNCC: 5 | RNVC: 9

7 Mar 1984

3040-01-173-9710
Mechanical Drive Housing

011739710
735418: RNCC: 3 | RNVC: 2
3040PL0667085: RNCC: 6 | RNVC: 9
735418-1: RNCC: C | RNVC: 1

13 Mar 1984

3040-01-173-5241
Compressor Arm

011735241
9125M65G04: RNCC: 3 | RNVC: 2

7 Mar 1984

3040-01-176-9580
Control Cam

011769580
1-085-041: RNCC: 3 | RNVC: 2

18 Apr 1984

3040-01-177-1450
Friction Lining

011771450
2A1-749-4: RNCC: 3 | RNVC: 2

19 Apr 1984

3040-01-178-7116
Control Cam

011787116
13214E2067: RNCC: 3 | RNVC: 2

9 May 1984

3040-01-178-7206
Remote Control Lever

011787206
8729082: RNCC: 3 | RNVC: 2

9 May 1984

3040-01-178-9160
Mechanical Drive Housing

011789160
H01-1-2-1001: RNCC: 3 | RNVC: 2

11 May 1984

3040-01-179-1349
Bell Crank

011791349
13211E8977: RNCC: 3 | RNVC: 2
13211E8977: RNCC: 3 | RNVC: 2

16 May 1984

3040-01-179-5089
Straight Shaft

011795089
P209467: RNCC: 3 | RNVC: 2
P209467: RNCC: 3 | RNVC: 9

19 May 1984

3040-01-179-6063
Shouldered Shaft

011796063
006-NGC-004-300: RNCC: 3 | RNVC: 2
D-006-NGC-0-04-320: RNCC: 5 | RNVC: 9
C-006-NGC-0-04-301: RNCC: 5 | RNVC: 9
FNGC0-96-007PC6: RNCC: C | RNVC: 1
FNDG0-99-002PC6: RNCC: C | RNVC: 1
D-006-NGC-0-04-301: RNCC: C | RNVC: 1
F-NGC-0-99-022 ITEM 9: RNCC: C | RNVC: 1
D-006-NGC-0-01-320: RNCC: C | RNVC: 1
D-006-NGC-0-04-300: RNCC: C | RNVC: 1

19 May 1984

3040-01-179-8770
Shouldered Shaft

011798770
P417694: RNCC: 3 | RNVC: 2
P417694: RNCC: 3 | RNVC: 9

22 May 1984

3040-01-179-8776
Manual Control Lever

011798776
P413952: RNCC: 3 | RNVC: 9
P413952: RNCC: C | RNVC: 1

22 May 1984

3040-01-179-9207
Nonrotating Shaft Eye Bracket

011799207
12330625: RNCC: 3 | RNVC: 2
BML62780: RNCC: 5 | RNVC: 2
BML62780: RNCC: 5 | RNVC: 2

22 May 1984

3040-01-180-0645
Rigid Connecting Link

011800645
P408301: RNCC: 3 | RNVC: 2
P408301: RNCC: 3 | RNVC: 9

24 May 1984

3040-01-180-3166
Rigid Connecting Link

011803166
2CR837: RNCC: 3 | RNVC: 2
2712524-1: RNCC: 5 | RNVC: 2
2712524-1: RNCC: 5 | RNVC: 9
2BA76: RNCC: 5 | RNVC: 9
2CR837: RNCC: 5 | RNVC: 9
2712524: RNCC: 5 | RNVC: 9
2712524-1: RNCC: 5 | RNVC: 9
82712524-1: RNCC: 5 | RNVC: 9

25 May 1984

3040-01-180-5639
Nonrotating Shaft Eye Bracket

011805639
12330549: RNCC: 3 | RNVC: 2
BML62778: RNCC: 5 | RNVC: 2
BML62778: RNCC: 5 | RNVC: 2

30 May 1984

3040-01-180-8406
Shouldered Shaft

011808406
P413013: RNCC: 3 | RNVC: 2
P413013: RNCC: 3 | RNVC: 9

4 Jun 1984

3040-01-180-3477
Straight Shaft

011803477
12321031: RNCC: 3 | RNVC: 2

26 May 1984

3040-01-181-5821
Rigid Connecting Link

011815821
32-650-4933: RNCC: 3 | RNVC: 2
32-650-4933: RNCC: 5 | RNVC: 2
32-650-4933: RNCC: 5 | RNVC: 9

12 Jun 1984

3040-01-182-6970
Rigid Connecting Link

011826970
SR10784A-6016: RNCC: 3 | RNVC: 2
7514-6016: RNCC: 3 | RNVC: 2
7014-175: RNCC: 5 | RNVC: 9
LE162-0002-6016: RNCC: 7 | RNVC: 2

27 Jun 1984

3040-01-183-2758
Shaft Retaining Plate

011832758
13204E3548: RNCC: 3 | RNVC: 2

4 Jul 1984

3040-01-183-8066
Shouldered Shaft

011838066
2545240: RNCC: 3 | RNVC: 2

10 Jul 1984

3040-01-183-8357
Linear Actuating Cylinder

011838357
12325842: RNCC: 3 | RNVC: 2

11 Jul 1984

3040-01-183-9056
Linear Actuating Cylinder Assembly

011839056
A13403: RNCC: 3 | RNVC: 2

11 Jul 1984

3040-01-183-9774
Shouldered Shaft

011839774
014420-1: RNCC: 3 | RNVC: 2
014420-1: RNCC: 3 | RNVC: 9

12 Jul 1984

3040-01-184-4417
Spider Assembly

011844417
412678-01: RNCC: 3 | RNVC: 9

18 Jul 1984

3040-01-130-3538
Rigid Connecting Link

011303538
232-36219-8: RNCC: 3 | RNVC: 2

21 Apr 1982

3040-01-130-6396
Rigid Connecting Link

011306396
4702-1: RNCC: 3 | RNVC: 2
74J618000-107: RNCC: 5 | RNVC: 2
74J618000-107: RNCC: 5 | RNVC: 9
SR11573A107: RNCC: 5 | RNVC: 9
10106875: RNCC: 6 | RNVC: 9

28 Apr 1982

3040-01-130-7066
Rigid Connecting Link

011307066
4700-7: RNCC: 3 | RNVC: 2
74J618000-111: RNCC: 5 | RNVC: 2
SR11573A111: RNCC: 5 | RNVC: 9
10106880: RNCC: 6 | RNVC: 9

28 Apr 1982

3040-01-130-3175
Rigid Connecting Link

011303175
65410-00015-041: RNCC: 3 | RNVC: 2

19 Apr 1982

3040-01-130-8632
Control Cam

011308632
264080924-0007: RNCC: 3 | RNVC: 2
2640-809X24 ITEM 7: RNCC: 3 | RNVC: 2
845-4687589 ITEM 17: RNCC: 5 | RNVC: 2
2640-809X24: RNCC: D | RNVC: 9

29 Apr 1982

3040-01-133-4127
Manual Control Lever

011334127
2-5904: RNCC: 3 | RNVC: 2
5904-1: RNCC: 3 | RNVC: 2
01220700: RNCC: 3 | RNVC: 2
09-0707: RNCC: 5 | RNVC: 2
5904-1: RNCC: 5 | RNVC: 2
2-5919: RNCC: 5 | RNVC: 9
72569200: RNCC: 5 | RNVC: 9

13 Jun 1982

3040-01-138-0799
Shouldered Shaft

011380799
5004363: RNCC: 3 | RNVC: 2
10106899: RNCC: 6 | RNVC: 9

6 Sep 1982

3040-01-138-8168
Rigid Connecting Link

011388168
65415-11101-053: RNCC: 3 | RNVC: 2

21 Sep 1982

3040-01-139-1609
Torque Shaft

011391609
27021-1480: RNCC: 3 | RNVC: 2

25 Sep 1982

3040-01-140-3894
Bearing Shaft

011403894
730215: RNCC: 3 | RNVC: 2

11 Oct 1982

3040-01-140-4573
Remote Control Lever

011404573
12297023-6: RNCC: 3 | RNVC: 2
10085867: RNCC: 6 | RNVC: 9
12297023: RNCC: D | RNVC: 9

13 Oct 1982

3040-01-141-0914
Shouldered Shaft

011410914
62715: RNCC: 3 | RNVC: 2

23 Oct 1982

3040-01-141-7815
Remote Control Lever

011417815
LP2814: RNCC: 3 | RNVC: 2
LP2814: RNCC: 5 | RNVC: 9
39011: RNCC: C | RNVC: 1
QK-1067207: RNCC: D | RNVC: 9

4 Nov 1982

3040-01-142-4268
Shouldered Shaft

011424268
74A650066-2001: RNCC: 3 | RNVC: 2
74A650066-2001: RNCC: 5 | RNVC: 2
74A650066-2001: RNCC: 5 | RNVC: 2
74A650066-2001: RNCC: 5 | RNVC: 2
74A650066-2001: RNCC: 5 | RNVC: 9
74A650066-2001: RNCC: 5 | RNVC: 9
10106923: RNCC: 6 | RNVC: 9

16 Nov 1982

3040-01-142-4267
Shouldered Shaft

011424267
3014077-1: RNCC: 3 | RNVC: 2
3014077-1: RNCC: 5 | RNVC: 1
3014077-1: RNCC: 5 | RNVC: 9
10106922: RNCC: 6 | RNVC: 9

16 Nov 1982

3040-01-143-5916
Rigid Connecting Link

011435916
1231-187-1: RNCC: 3 | RNVC: 2
1231-187-1: RNCC: C | RNVC: 1

6 Dec 1982

3040-01-143-8511
Shouldered Shaft

011438511
769211-1: RNCC: 3 | RNVC: 2

9 Dec 1982

3040-01-144-8238
Shaft Collar

011448238
55025BX: RNCC: 3 | RNVC: 2
55025BX: RNCC: 5 | RNVC: 9

30 Dec 1982

3040-01-145-2004
Lever

011452004
329962: RNCC: 3 | RNVC: 2
0329962: RNCC: 5 | RNVC: 2
303948: RNCC: 5 | RNVC: 9
329962: RNCC: 5 | RNVC: 9
303948: RNCC: 5 | RNVC: 9
0329962: RNCC: 5 | RNVC: 9
0329962: RNCC: 5 | RNVC: 9
303948: RNCC: 5 | RNVC: 9
303948: RNCC: 5 | RNVC: 9
329962: RNCC: 5 | RNVC: 9

7 Jan 1983

3040-01-145-2275
Counterbalance Weight

011452275
565906CL4: RNCC: 3 | RNVC: 2
565906CL4: RNCC: 5 | RNVC: 2
565906CL4: RNCC: 5 | RNVC: 2

7 Jan 1983

3040-01-146-8230
Shouldered Shaft

011468230
726910: RNCC: 3 | RNVC: 2

7 Feb 1983

3040-01-149-1111
Linear Actuating Cylinder Assembly

011491111
A-3261-S-253: RNCC: 3 | RNVC: 2
A-3261-S-253X: RNCC: 5 | RNVC: 9
A-3261-A-253: RNCC: 5 | RNVC: 9

15 Mar 1983

3040-01-149-7965
Worm Shaft

011497965
60-300-0038-2: RNCC: 3 | RNVC: 2
01-435-0294-5-B PIECE 22: RNCC: 5 | RNVC: 2
01-435-0294-5-B: RNCC: D | RNVC: 9

26 Mar 1983

3040-01-150-4928
Manual Control Lever

011504928
B48535MEF: RNCC: 3 | RNVC: 2
D49275-ITEM-5: RNCC: 3 | RNVC: 2
D49275-PART-B48535MEF: RNCC: 3 | RNVC: 2
D49275: RNCC: D | RNVC: 9

5 Apr 1983

3040-01-151-3420
Manual Control Lever

011513420
1338000W: RNCC: 3 | RNVC: 2
1338000W: RNCC: 5 | RNVC: 9

16 Apr 1983

3040-01-151-3438
Linear Actuating Cylinder Piston

011513438
3P5359: RNCC: 3 | RNVC: 2

16 Apr 1983

3040-01-151-5663
Linear Actuating Cylinder Piston

011515663
8624138: RNCC: 3 | RNVC: 2
8624138: RNCC: 5 | RNVC: 9
3040PL0751895: RNCC: 6 | RNVC: 9

19 Apr 1983

3040-01-152-7896
Rigid Connecting Link

011527896
74B618011-115: RNCC: 3 | RNVC: 2
6512-15: RNCC: 3 | RNVC: 2
74B618011-115: RNCC: 5 | RNVC: 2
74B618011-115: RNCC: 5 | RNVC: 2
74J618011-115: RNCC: 5 | RNVC: 9
SR11880A115: RNCC: 5 | RNVC: 9
SR11880A115: RNCC: 5 | RNVC: 9
SR11880A115: RNCC: C | RNVC: 1
6512: RNCC: D | RNVC: 9

7 May 1983

3040-01-152-8322
Rigid Connecting Link

011528322
70400-01250-052: RNCC: 3 | RNVC: 2
2018-3: RNCC: 5 | RNVC: 9
70400-01250-052: RNCC: 5 | RNVC: 9
1100030-052: RNCC: 5 | RNVC: 9
SR11777A: RNCC: 5 | RNVC: 9
3040PL1960181: RNCC: 6 | RNVC: 9

9 May 1983

3040-01-153-9644
Rigid Connecting Link

011539644
6513-13: RNCC: 3 | RNVC: 2
10153952: RNCC: 6 | RNVC: 9

18 May 1983

3040-01-154-2959
Rigid Connecting Link

011542959
65415-11101-056: RNCC: 3 | RNVC: 2

23 May 1983

3040-01-154-2851
Counterbalance Weight

011542851
3597869: RNCC: 3 | RNVC: 2
3597869: RNCC: 5 | RNVC: 2
10130383: RNCC: 6 | RNVC: 9

23 May 1983

3040-01-154-7679
Rigid Connecting Link

011547679
2402-8240.00: RNCC: 3 | RNVC: 2
10501275: RNCC: 3 | RNVC: 2

31 May 1983

3040-01-154-8097
Valve Shaft

011548097
B2198: RNCC: 3 | RNVC: 2
B2165-PC199: RNCC: 3 | RNVC: 9
B2198: RNCC: 5 | RNVC: 9

31 May 1983

3040-01-154-9719
Shouldered Shaft

011549719
4677990-0017: RNCC: 3 | RNVC: 2
87682-7209 ITEM 17: RNCC: 5 | RNVC: 2
522-4677990 ITEM 17: RNCC: 5 | RNVC: 2
87682-7209: RNCC: D | RNVC: 9
522-4677990: RNCC: D | RNVC: 9

3 Jun 1983

3040-01-155-1665
Rigid Connecting Link

011551665
65414-03104-048: RNCC: 3 | RNVC: 2

6 Jun 1983

3040-01-154-7834
Mechanical Drive Housing

011547834
2402-7310.00: RNCC: 3 | RNVC: 2
10501080: RNCC: 3 | RNVC: 2

31 May 1983

3040-01-156-9994
Manual Control Lever

011569994
15549108: RNCC: 3 | RNVC: 2
15549108: RNCC: 5 | RNVC: 9
362280: RNCC: 5 | RNVC: 9
14053591: RNCC: 5 | RNVC: 9

28 Jun 1983

3040-01-157-8733
Manual Control Lever

011578733
65301-01010-043: RNCC: 3 | RNVC: 2

13 Jul 1983

3040-01-157-9433
Mechanical Drive Housing

011579433
1557035: RNCC: 3 | RNVC: 2
1557035: RNCC: 5 | RNVC: 2

13 Jul 1983

3040-01-159-0988
Nonrotating Shaft Eye Bracket

011590988
1342800: RNCC: 3 | RNVC: 2
1342800: RNCC: 5 | RNVC: 9

3 Aug 1983

3040-01-159-4816
Bell Crank

011594816
70400-02171-052: RNCC: 3 | RNVC: 2

9 Aug 1983

3040-01-159-4817
Bell Crank

011594817
70400-02205-043: RNCC: 3 | RNVC: 2
3040PL1939022: RNCC: 6 | RNVC: 9

9 Aug 1983

3040-01-159-4818
Rigid Connecting Link

011594818
70400-22258-043: RNCC: 3 | RNVC: 2
70400-22258-043: RNCC: 5 | RNVC: 2
70400-22258-043: RNCC: 5 | RNVC: 9
3040PL1939280: RNCC: 6 | RNVC: 9

9 Aug 1983

3040-01-159-6476
Straight Shaft

011596476
2531002: RNCC: 3 | RNVC: 2
2531002: RNCC: 5 | RNVC: 9

11 Aug 1983

3040-01-160-3582
Flexible Shaft Assembly

011603582
5102466: RNCC: 3 | RNVC: 2
5102466: RNCC: 5 | RNVC: 1
K-5102466: RNCC: 5 | RNVC: 9
3040011603582: RNCC: 5 | RNVC: 9
3040011603582: RNCC: 6 | RNVC: 9

20 Aug 1983

3040-01-161-8617
Rigid Connecting Link

011618617
2012A78: RNCC: 3 | RNVC: 2
2012A78: RNCC: 5 | RNVC: 9
2012A78: RNCC: C | RNVC: 1

11 Sep 1983

3040-01-161-8618
Rigid Connecting Link

011618618
2012B201: RNCC: 3 | RNVC: 2
2012B201: RNCC: 3 | RNVC: 9

11 Sep 1983

3040-01-161-8620
Rigid Connecting Link

011618620
70400-02268-045: RNCC: 3 | RNVC: 2
3040PL1954566: RNCC: 6 | RNVC: 9
2029-045: RNCC: C | RNVC: 1
70400-02268: RNCC: D | RNVC: 9
70400-02268-043: RNCC: E | RNVC: 8

11 Sep 1983

3040-01-163-0794
Shift Mount Asy

011630794
1351980W: RNCC: 3 | RNVC: 2
1351980W: RNCC: 5 | RNVC: 9

27 Sep 1983

3040-01-163-6065
Counterbalance Weight

011636065
579-1006-28: RNCC: 3 | RNVC: 2
10163645: RNCC: 6 | RNVC: 9

5 Oct 1983

3040-01-163-6342
Counterbalance Weight

011636342
2301009: RNCC: 3 | RNVC: 9
AS44521-030: RNCC: 5 | RNVC: 2
AS44521-030: RNCC: 5 | RNVC: 9
AS44521-030: RNCC: C | RNVC: 1

6 Oct 1983

3040-01-163-7393
Counterbalance Weight

011637393
2301014: RNCC: 3 | RNVC: 2
2301014: RNCC: 5 | RNVC: 2
AS44521-080: RNCC: 5 | RNVC: 2
AS44521-080: RNCC: 5 | RNVC: 9
2301014: RNCC: 5 | RNVC: 9
AS44521-080: RNCC: C | RNVC: 1

7 Oct 1983

3040-01-163-7357
Shaft Retaining Plate

011637357
11322: RNCC: 3 | RNVC: 2
11322: RNCC: 5 | RNVC: 9
50850: RNCC: D | RNVC: 9

6 Oct 1983

3040-01-163-8136
Breather

011638136
DB75B: RNCC: 3 | RNVC: 2
309101: RNCC: 5 | RNVC: 2
309101: RNCC: 5 | RNVC: 9

8 Oct 1983

3040-01-164-3954
Rigid Connecting Link

011643954
406-012-129-101: RNCC: 3 | RNVC: 2

16 Oct 1983

3040-01-165-0189
Shaft Collar

011650189
15054: RNCC: 3 | RNVC: 2
7L112: RNCC: 5 | RNVC: 2
CL-28-F: RNCC: 5 | RNVC: 2
52E768-14: RNCC: 5 | RNVC: 9
28L: RNCC: 5 | RNVC: 9
13743-018: RNCC: 7 | RNVC: 2

24 Oct 1983

3040-01-165-5549
Rigid Connecting Link

011655549
70106-08111-102: RNCC: 3 | RNVC: 9
70106-08111-102: RNCC: 5 | RNVC: 2

31 Oct 1983

3040-01-165-9644
Rigid Connecting Link

011659644
70750-22101-101: RNCC: 3 | RNVC: 2
70750-22101-101: RNCC: 5 | RNVC: 2
7754: RNCC: 5 | RNVC: 9
70750-22101: RNCC: D | RNVC: 9

5 Nov 1983

3040-01-166-9164
Counterbalance Weight

011669164
7-211412024-7: RNCC: 3 | RNVC: 2
7-211412024-7: RNCC: 5 | RNVC: 9

19 Nov 1983

3040-01-167-7206
Worm Shaft

011677206
312-0782: RNCC: 3 | RNVC: 2
9D1142: RNCC: 5 | RNVC: 9
312-0782: RNCC: 5 | RNVC: 9

3 Dec 1983

3040-01-168-2050
Helical Gearshaft

011682050
3-P-282: RNCC: 3 | RNVC: 2
002903T: RNCC: 5 | RNVC: 2

14 Dec 1983

3040-01-167-8118
Shouldered Shaft

011678118
38513-406 17030: RNCC: 3 | RNVC: 2
38513-406: RNCC: 5 | RNVC: 9

6 Dec 1983

3040-01-168-2978
Dust Cap

011682978
10-427950-138: RNCC: 3 | RNVC: 2

15 Dec 1983

3040-01-166-8890
Ball Joint

011668890
10260: RNCC: 3 | RNVC: 2
3744929: RNCC: 3 | RNVC: 2

18 Nov 1983

3040-01-169-3750
Straight Shaft

011693750
15731: RNCC: 3 | RNVC: 2

7 Jan 1984

3040-01-169-8733
Counterbalance Weight

011698733
R49531: RNCC: 3 | RNVC: 2
R49531: RNCC: 3 | RNVC: 9
R49531: RNCC: 5 | RNVC: 9
R49531: RNCC: C | RNVC: 1

17 Jan 1984

3040-01-171-0099
Shouldered Shaft

011710099
13211E8982: RNCC: 3 | RNVC: 2

1 Feb 1984

3040-01-171-0921
Counterbalance Weight

011710921
9528M53P01: RNCC: 3 | RNVC: 2

3 Feb 1984

3040-01-171-8540
Rigid Connecting Link

011718540
11453489: RNCC: 3 | RNVC: 2
11453489: RNCC: 5 | RNVC: 1

15 Feb 1984

3040-01-172-0420
Linear Actuating Cylinder Piston

011720420
009442: RNCC: 3 | RNVC: 2
2AE434: RNCC: 5 | RNVC: 2
2AE434: RNCC: 5 | RNVC: 9

15 Feb 1984

3040-01-172-0258
Counterbalance Weight

011720258
5045M16P01: RNCC: 3 | RNVC: 2

15 Feb 1984

3040-01-173-0550
Counterbalance Weight

011730550
1590M73G01: RNCC: 3 | RNVC: 2
9921M53P03: RNCC: 5 | RNVC: 9

29 Feb 1984

3040-01-173-4297
Ball Joint

011734297
82A5027A6625: RNCC: 3 | RNVC: 2
82A5027A6625: RNCC: 5 | RNVC: 9

5 Mar 1984

3040-01-173-7698
Shaft Collar

011737698
L52006: RNCC: 3 | RNVC: 2

8 Mar 1984

3040-01-173-7699
Shaft Collar

011737699
L52596: RNCC: 3 | RNVC: 2

8 Mar 1984

3040-01-173-7711
Bell Crank Stop Block

011737711
L41558: RNCC: 3 | RNVC: 2

8 Mar 1984

3040-01-175-9728
Remote Control Lever

011759728
4478-084: RNCC: 3 | RNVC: 2

6 Apr 1984

3040-01-176-9434
Shouldered Shaft

011769434
11152880: RNCC: 3 | RNVC: 2
1115.288: RNCC: 5 | RNVC: 9

18 Apr 1984

3040-01-176-9529
Linear Actuating Cylinder Assembly Parts Kit

011769529
31625: RNCC: 3 | RNVC: 2
31625: RNCC: 5 | RNVC: 9

18 Apr 1984

3040-01-177-1899
Bell Crank

011771899
70400-02171-051: RNCC: 3 | RNVC: 2

20 Apr 1984

3040-01-177-1992
Bell Crank

011771992
70400-02504-044: RNCC: 3 | RNVC: 2

20 Apr 1984

3040-01-177-1900
Bell Crank

011771900
70400-02502-047: RNCC: 3 | RNVC: 2

20 Apr 1984

3040-01-177-2429
Mechanical Drive Housing

011772429
87832-1604 ITEM 2 AND ITEM 19: RNCC: 3 | RNVC: 2
709-4684875 ITEM 2 AND ITEM 19: RNCC: 5 | RNVC: 2
709-4684875: RNCC: D | RNVC: 9
87832-1604: RNCC: D | RNVC: 9

20 Apr 1984

3040-01-179-3046
Speedometer-Tachometer Drive Adapter

011793046
L112317: RNCC: 3 | RNVC: 2

16 May 1984

3040-01-179-4352
Bell Crank

011794352
10513717: RNCC: 3 | RNVC: 2

18 May 1984

3040-01-179-9218
Bell Crank

011799218
13204E3691: RNCC: 3 | RNVC: 2

22 May 1984

3040-01-179-9241
Shouldered Shaft

011799241
12325791: RNCC: 3 | RNVC: 2
13204E3706: RNCC: 5 | RNVC: 9

22 May 1984

3040-01-180-0724
Rigid Connecting Link

011800724
P407105: RNCC: 3 | RNVC: 2
P407105: RNCC: 3 | RNVC: 9

24 May 1984

3040-01-180-9925
Shoe Type Brake

011809925
104HD-0-410W: RNCC: 3 | RNVC: 2
314314 ITEM 116: RNCC: 5 | RNVC: 2
318744 ITEM 116: RNCC: C | RNVC: 1
314314: RNCC: D | RNVC: 9

6 Jun 1984

3040-01-181-3908
Rigid Connecting Link

011813908
C9565-2: RNCC: 3 | RNVC: 2
C9565-2: RNCC: 5 | RNVC: 2
53322-2: RNCC: 7 | RNVC: 1
C9565: RNCC: D | RNVC: 9

9 Jun 1984

3040-01-181-1271
Control Cam

011811271
707266-1: RNCC: 3 | RNVC: 2
707266-1: RNCC: 3 | RNVC: 9
707266-1: RNCC: 5 | RNVC: 9

6 Jun 1984

3040-01-181-8447
Shouldered Shaft

011818447
704030: RNCC: 3 | RNVC: 2

16 Jun 1984

3040-01-182-0303
Brake Actuator Piston

011820303
6543C111-1: RNCC: 3 | RNVC: 2
6543C111-1: RNCC: C | RNVC: 1

19 Jun 1984

3040-01-182-0972
Rigid Connecting Link

011820972
7-317236251: RNCC: 3 | RNVC: 2
7-317236251: RNCC: 5 | RNVC: 2
7-317236251: RNCC: 5 | RNVC: 9

19 Jun 1984

3040-01-182-4576
Rigid Connecting Link

011824576
7514-6052-G: RNCC: 3 | RNVC: 2
LE162-0002-6052: RNCC: 5 | RNVC: 2
SR10784A-6052: RNCC: 5 | RNVC: 9
7514-6052: RNCC: 5 | RNVC: 9
LE162-0002: RNCC: D | RNVC: 9

23 Jun 1984

3040-01-182-6263
Rigid Connecting Link

011826263
7514-6042: RNCC: 3 | RNVC: 2
SR10784A-6042: RNCC: 5 | RNVC: 2
7014-179: RNCC: 5 | RNVC: 9
LE162-0002-6042: RNCC: 7 | RNVC: 2

26 Jun 1984

3040-01-182-6297
Gearshaft

011826297
301-483-018-0: RNCC: 3 | RNVC: 2

21 Sep 2011

3040-01-182-6845
Shouldered Shaft

011826845
3387-084: RNCC: 3 | RNVC: 2
3387-084: RNCC: 5 | RNVC: 2

27 Jun 1984

3040-01-182-7848
Mechanical Drive Housing

011827848
894044: RNCC: 3 | RNVC: 2
894044: RNCC: 5 | RNVC: 2

27 Jun 1984

3040-01-182-7908
Rigid Connecting Link

011827908
1132655C1: RNCC: 3 | RNVC: 9

27 Jun 1984

3040-01-183-0584
Spur Gearshaft

011830584
7-217221108: RNCC: 3 | RNVC: 2
7-217221108: RNCC: 3 | RNVC: 2
S1999ZR0431: RNCC: 5 | RNVC: 2
7-217221108: RNCC: 5 | RNVC: 9
7-217221108: RNCC: 5 | RNVC: 9
7-217221108: RNCC: 5 | RNVC: 9

1 Jul 1984

3040-01-183-6891
Body Hub

011836891
13211E9222: RNCC: 3 | RNVC: 2

8 Jul 1984

3040-01-183-2570
Rigid Connecting Link

011832570
32-650-4607: RNCC: 3 | RNVC: 2

4 Jul 1984

3040-01-183-6015
Mechanical Drive Housing

011836015
8D4026: RNCC: 3 | RNVC: 2

7 Jul 1984

3040-01-184-1706
Rigid Connecting Link

011841706
12321023: RNCC: 3 | RNVC: 2

15 Jul 1984

3040-01-184-3498
Linear Actuating Cylinder Piston Rod

011843498
H47014: RNCC: 3 | RNVC: 2
H47014: RNCC: 3 | RNVC: 9
MLG8601G1 PC 55: RNCC: 5 | RNVC: 2
MLG8601G1 PC 55: RNCC: 5 | RNVC: 9
H47014: RNCC: 5 | RNVC: 9
MLG8601G1 PC 55: RNCC: 5 | RNVC: 9
MLG8601G1 PC 55: RNCC: 5 | RNVC: 9
H47014: RNCC: 5 | RNVC: 9
33423278: RNCC: C | RNVC: 1

17 Jul 1984

3040-01-184-4584
Linear Actuating Cylinder Piston Rod

011844584
522-4675669 ITEM 6: RNCC: 3 | RNVC: 2
87643-6703-0006: RNCC: 3 | RNVC: 2
4675669-0006: RNCC: 5 | RNVC: 2
4675669-006: RNCC: 5 | RNVC: 9
87643-6703: RNCC: D | RNVC: 9
4675669: RNCC: D | RNVC: 9

18 Jul 1984

3040-01-185-6169
Rigid Connecting Link

011856169
S893-0011-Z: RNCC: 3 | RNVC: 2
D4R-13482 ITEM 56: RNCC: 5 | RNVC: 2
S581-0066-Z: RNCC: 5 | RNVC: 9
D4R-13482: RNCC: D | RNVC: 9

31 Jul 1984

3040-01-185-5908
Remote Control Lever

011855908
13215E6550: RNCC: 3 | RNVC: 2

31 Jul 1984

3040-01-185-7522
Linear Actuating Cylinder

011857522
L6317318-005: RNCC: 3 | RNVC: 2

3 Aug 1984

3040-01-186-0307
Stub Shaft

011860307
9001D42-1: RNCC: 3 | RNVC: 2
9001D42-1: RNCC: 5 | RNVC: 9

6 Aug 1984

3040-01-185-6608
Body Hub

011856608
153C5779G2: RNCC: 3 | RNVC: 2
153C5779G2: RNCC: 5 | RNVC: 9

1 Aug 1984

3040-01-133-7851
Gear Shaft

011337851
B20035D045-109: RNCC: 3 | RNVC: 2
B20035D045: RNCC: 5 | RNVC: 9
E20035D001 ITEM 109: RNCC: 5 | RNVC: 9

22 Jun 1982

3040-01-143-5749
Control Cam

011435749
1534AS207: RNCC: 3 | RNVC: 2
1534AS207: RNCC: 5 | RNVC: 2
1534AS207: RNCC: 5 | RNVC: 2
1534AS207: RNCC: 5 | RNVC: 2
1534AS207: RNCC: 5 | RNVC: 2
1534AS207: RNCC: 5 | RNVC: 2
1534AS207: RNCC: 5 | RNVC: 9
D013421-1: RNCC: 5 | RNVC: 9
D013421-1: RNCC: 5 | RNVC: 9
1534AS207: RNCC: 5 | RNVC: 9

6 Dec 1982

3040-01-140-6213
Straight Shaft

011406213
55-79501-1032-2: RNCC: 3 | RNVC: 2
55-79501-1032-2: RNCC: 5 | RNVC: 1

14 Oct 1982

3040-01-176-9431
Linear Actuating Cylinder

011769431
6353118: RNCC: 3 | RNVC: 2
2536222-605: RNCC: 5 | RNVC: 2
253 6222-605: RNCC: 5 | RNVC: 2
91169-991: RNCC: 5 | RNVC: 9
2536222-605: RNCC: 5 | RNVC: 9
10422959: RNCC: 6 | RNVC: 9

18 Apr 1984

3040-01-183-1787
Rigid Connecting Link

011831787
4057674: RNCC: 3 | RNVC: 2
4057674: RNCC: 5 | RNVC: 2
4057674: RNCC: 5 | RNVC: 9
3040PL0667563: RNCC: 6 | RNVC: 9

3 Jul 1984

3040-01-129-3925
Bell Crank

011293925
65414-03105-049: RNCC: 3 | RNVC: 2
65414-03105-049: RNCC: 5 | RNVC: 2

5 Apr 1982

3040-01-129-3926
Bell Crank

011293926
65414-03106-049: RNCC: 3 | RNVC: 2

5 Apr 1982

3040-01-129-3942
Rigid Connecting Link

011293942
74A670502-1003: RNCC: 3 | RNVC: 2
10106868: RNCC: 6 | RNVC: 9

5 Apr 1982

3040-01-129-3795
Inertia Damper

011293795
4056T34P03: RNCC: 3 | RNVC: 2
10158433: RNCC: 6 | RNVC: 9

5 Apr 1982

3040-01-129-1949
Rigid Connecting Link

011291949
1534AS412: RNCC: 3 | RNVC: 2
1534AS412: RNCC: 5 | RNVC: 2
1534AS412: RNCC: 5 | RNVC: 2
1534AS412: RNCC: 5 | RNVC: 2
1534AS412: RNCC: 5 | RNVC: 2
C013428-1: RNCC: 5 | RNVC: 9
1534AS412: RNCC: 5 | RNVC: 9
C013428-1: RNCC: 5 | RNVC: 9
C013428-1: RNCC: 5 | RNVC: 9
C013428-1: RNCC: 5 | RNVC: 9

1 Apr 1982

3040-01-129-8471
Bell Crank

011298471
65414-03104-053: RNCC: 3 | RNVC: 2

12 Apr 1982

3040-01-129-6059
Hub Clamp

011296059
12310979: RNCC: 1 | RNVC: 2
CL24F: RNCC: 3 | RNVC: 2
15046 CAS NO.403-0235: RNCC: 3 | RNVC: 2

8 Apr 1982

3040-01-129-8482
Remote Control Lever

011298482
65662-11216-102: RNCC: 3 | RNVC: 2
65662-11216-101: RNCC: 5 | RNVC: 9

12 Apr 1982

3040-01-129-8491
Rigid Connecting Link

011298491
65122-11257-057: RNCC: 3 | RNVC: 2

12 Apr 1982

3040-01-130-3178
Rigid Connecting Link

011303178
65410-00015-056: RNCC: 3 | RNVC: 2

19 Apr 1982

3040-01-130-2806
Bell Crank Support

011302806
65415-11251-042: RNCC: 3 | RNVC: 2

19 Apr 1982

3040-01-130-8635
Linear Actuating Cylinder Piston

011308635
01007G14P0001: RNCC: 3 | RNVC: 9
1007G14 PIECE1: RNCC: 5 | RNVC: 9
781E557 PIECE31: RNCC: 5 | RNVC: 9
01007G14P0001: RNCC: C | RNVC: 1
01007G14P0001: RNCC: C | RNVC: 1
1007G14: RNCC: D | RNVC: 9

29 Apr 1982

3040-01-133-8061
Rigid Connecting Link

011338061
74A635601-1003: RNCC: 3 | RNVC: 2
74A635601-1003: RNCC: 5 | RNVC: 2
10106892: RNCC: 6 | RNVC: 9

22 Jun 1982

3040-01-134-8868
Shaft Collar

011348868
1534AS201: RNCC: 3 | RNVC: 2
1534AS201: RNCC: 5 | RNVC: 2
1534AS201: RNCC: 5 | RNVC: 2
D013407-1: RNCC: 5 | RNVC: 9
D013407-1: RNCC: 5 | RNVC: 9
D013407-1: RNCC: 5 | RNVC: 9
1534AS201: RNCC: 5 | RNVC: 9
D013407: RNCC: 5 | RNVC: 9
10106894: RNCC: 6 | RNVC: 9

13 Jul 1982

3040-01-136-0942
Rigid Connecting Link

011360942
65219-09041-042: RNCC: 3 | RNVC: 2

3 Aug 1982

3040-01-135-9210
Rigid Connecting Link

011359210
65316-12036-042: RNCC: 3 | RNVC: 2
65316-12036-042: RNCC: 5 | RNVC: 2
65316-12036-042: RNCC: 5 | RNVC: 2

30 Jul 1982

3040-01-137-0392
Brake Disc

011370392
CMD-185-8: RNCC: 3 | RNVC: 9

19 Aug 1982

3040-01-138-0800
Shouldered Shaft

011380800
64351-11105-107: RNCC: 3 | RNVC: 2

6 Sep 1982

3040-01-138-8578
Manual Control Lever

011388578
302-Z-676: RNCC: 3 | RNVC: 2
302-Z-676X: RNCC: 5 | RNVC: 9

22 Sep 1982

3040-01-139-2485
Remote Control Lever

011392485
3014051-1: RNCC: 3 | RNVC: 2
3014051-1: RNCC: 5 | RNVC: 1
3014051-1: RNCC: 5 | RNVC: 9
10106904: RNCC: 6 | RNVC: 9

27 Sep 1982

3040-01-138-5881
Bell Crank

011385881
65-38596-501: RNCC: 3 | RNVC: 2
65-38596-4: RNCC: 5 | RNVC: 2

16 Sep 1982

3040-01-139-2191
Shouldered Shaft

011392191
132D1908: RNCC: 3 | RNVC: 2
10106902: RNCC: 6 | RNVC: 9

27 Sep 1982

3040-01-139-4488
Rigid Connecting Link

011394488
4674116-0026: RNCC: 3 | RNVC: 2
515 4674116 ITEM 26: RNCC: 5 | RNVC: 2
515 4674116: RNCC: D | RNVC: 9
87552-0608: RNCC: D | RNVC: 9

1 Oct 1982

3040-01-139-6946
Lever Pivot Shaft

011396946
2663702: RNCC: 3 | RNVC: 2
2663702: RNCC: 5 | RNVC: 2
10158889: RNCC: 6 | RNVC: 9

5 Oct 1982

3040-01-139-3110
Remote Control Lever

011393110
51545: RNCC: 3 | RNVC: 9

29 Sep 1982

3040-01-140-3683
Bell Crank

011403683
74A425006-1001: RNCC: 3 | RNVC: 2
74A425006-1001: RNCC: 5 | RNVC: 2
10106915: RNCC: 6 | RNVC: 9

11 Oct 1982

3040-01-140-3193
Straight Shaft

011403193
476863: RNCC: 3 | RNVC: 2

11 Oct 1982

3040-01-140-4914
Rigid Connecting Link

011404914
4674116-0009: RNCC: 3 | RNVC: 2
515 4674116 ITEM 9: RNCC: 5 | RNVC: 2
87552-0688: RNCC: D | RNVC: 9
515 4674116: RNCC: D | RNVC: 9

13 Oct 1982

3040-01-143-7976
Rigid Connecting Link

011437976
74A635609-1003: RNCC: 3 | RNVC: 2
74A635609-1003: RNCC: 5 | RNVC: 2
10106928: RNCC: 6 | RNVC: 9

9 Dec 1982

3040-01-144-0260
Linear Actuating Cylinder Piston

011440260
B1399C: RNCC: 3 | RNVC: 2

13 Dec 1982

3040-01-144-8221
Shouldered Shaft

011448221
350359-001: RNCC: 3 | RNVC: 2

30 Dec 1982

3040-01-145-2752
Rigid Connecting Link

011452752
65410-00014-061: RNCC: 3 | RNVC: 2

8 Jan 1983

3040-01-145-4531
Bell Crank

011454531
70400-02207-102: RNCC: 3 | RNVC: 2
70400-02207-102: RNCC: 5 | RNVC: 9

12 Jan 1983

3040-01-145-9637
Spur Gearshaft

011459637
3012532: RNCC: 3 | RNVC: 2
5731008: RNCC: 3 | RNVC: 2

21 Jan 1983

3040-01-146-8404
Rigid Connecting Link

011468404
65122-11257-052: RNCC: 3 | RNVC: 2

7 Feb 1983

3040-01-147-3497
Shaft Retaining Plate

011473497
9344996: RNCC: 3 | RNVC: 2

15 Feb 1983

3040-01-149-3475
Rigid Connecting Link

011493475
5994974: RNCC: 3 | RNVC: 2
SF5994974-B: RNCC: D | RNVC: 9

18 Mar 1983

3040-01-147-6264
Rigid Connecting Link

011476264
65410-00014-052: RNCC: 3 | RNVC: 2

18 Feb 1983

3040-01-149-7966
Worm Shaft

011497966
61-409-0043-2: RNCC: 3 | RNVC: 2
01-435-0295-5-B PIECE 39: RNCC: 5 | RNVC: 2
01-435-0295-5-B: RNCC: D | RNVC: 9

26 Mar 1983

3040-01-150-2020
Shouldered Shaft

011502020
1153M55P01: RNCC: 3 | RNVC: 2

1 Apr 1983

3040-01-150-2252
Shouldered Shaft

011502252
561367: RNCC: 3 | RNVC: 2
11V-102-S27: RNCC: 5 | RNVC: 9
465-120-020: RNCC: 5 | RNVC: 9

1 Apr 1983

3040-01-150-3938
Ball Joint

011503938
111-B-0027-1: RNCC: 3 | RNVC: 2

4 Apr 1983

3040-01-150-6993
Extension Shaft

011506993
3687977: RNCC: 3 | RNVC: 2
3687977: RNCC: 5 | RNVC: 2
3687977: RNCC: 5 | RNVC: 2
3687977: RNCC: 5 | RNVC: 9
10117848: RNCC: 6 | RNVC: 9

7 Apr 1983

3040-01-150-6904
Shouldered Shaft

011506904
B499381: RNCC: 3 | RNVC: 2
B499381: RNCC: 5 | RNVC: 2
B499381: RNCC: 5 | RNVC: 9

7 Apr 1983

3040-01-151-0883
Remote Control Lever

011510883
721953: RNCC: 3 | RNVC: 2

12 Apr 1983

3040-01-151-8058
Spur Gearshaft

011518058
144EX827: RNCC: 3 | RNVC: 2
78908: RNCC: 5 | RNVC: 2
144EX827: RNCC: 5 | RNVC: 9
2AW91: RNCC: 5 | RNVC: 9

22 Apr 1983

3040-01-152-3614
Rigid Connecting Link

011523614
65410-00014-069: RNCC: 3 | RNVC: 2

30 Apr 1983

3040-01-152-7771
Push-Pull Control Assembly

011527771
T73042: RNCC: 3 | RNVC: 2
1309530: RNCC: 5 | RNVC: 2
1309530: RNCC: 5 | RNVC: 9
T73042: RNCC: 5 | RNVC: 9

7 May 1983

3040-01-154-1783
Rigid Connecting Link

011541783
65413-06501-045: RNCC: 3 | RNVC: 2

20 May 1983

3040-01-156-0470
Mechanical Drive Housing

011560470
12312431: RNCC: 3 | RNVC: 2

18 Jun 1983

3040-01-157-2655
Bell Crank

011572655
74A425006-1002: RNCC: 3 | RNVC: 2
74A425006-1002: RNCC: 5 | RNVC: 2
10106953: RNCC: 6 | RNVC: 9
74A425006: RNCC: D | RNVC: 9

2 Jul 1983

3040-01-157-4468
Rigid Connecting Link

011574468
3240582: RNCC: 3 | RNVC: 2
3040PL0890800: RNCC: 6 | RNVC: 9

6 Jul 1983

3040-01-157-6400
Shouldered Shaft

011576400
2498049: RNCC: 3 | RNVC: 2
2498049: RNCC: 5 | RNVC: 9
2498049: RNCC: 5 | RNVC: 9

9 Jul 1983

3040-01-158-4052
Straight Shaft

011584052
20298-A: RNCC: 3 | RNVC: 2
20298-A: RNCC: 3 | RNVC: 9

22 Jul 1983

3040-01-158-6097
Rigid Connecting Link

011586097
70400-02252-136: RNCC: 3 | RNVC: 2

25 Jul 1983

3040-01-158-7528
Straight Shaft

011587528
1343700: RNCC: 3 | RNVC: 2
1343700: RNCC: 5 | RNVC: 9

27 Jul 1983

Load More Results