What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 127 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 127 of 300

3040-01-203-5235
Hub Clamp

012035235
J26997-2: RNCC: 3 | RNVC: 2
2BA236: RNCC: 5 | RNVC: 2
2BA236: RNCC: 5 | RNVC: 9

15 Mar 1985

3040-01-203-7186
Control Cam

012037186
3037-824: RNCC: 3 | RNVC: 2

17 Mar 1985

3040-01-206-1348
Rod Assembly

012061348
2-13617-3: RNCC: 3 | RNVC: 9
2-13617-3: RNCC: 5 | RNVC: 2
2-13617-3: RNCC: 5 | RNVC: 2
2-13617-3: RNCC: 5 | RNVC: 9

15 Apr 1985

3040-01-206-6418
Bell Crank

012066418
L3400138-001: RNCC: 3 | RNVC: 2
L3400138-001: RNCC: 5 | RNVC: 2

20 Apr 1985

3040-01-207-9631
Shouldered Shaft

012079631
458-52254-1: RNCC: 3 | RNVC: 2
458-52254: RNCC: D | RNVC: 9

8 May 1985

3040-01-208-2831
Shouldered Shaft

012082831
5008071: RNCC: 3 | RNVC: 2

11 May 1985

3040-01-208-9290
Shouldered Shaft

012089290
7N5874: RNCC: 3 | RNVC: 2

21 May 1985

3040-01-209-3409
Manual Control Lever

012093409
21880: RNCC: 3 | RNVC: 2
15616: RNCC: 5 | RNVC: 9
18137: RNCC: 5 | RNVC: 9
21880: RNCC: 5 | RNVC: 9

29 May 1985

3040-01-211-2255
Manual Control Lever

012112255
1V1703: RNCC: 3 | RNVC: 2
1V1703: RNCC: 5 | RNVC: 2
2GK352: RNCC: 5 | RNVC: 2
2GK352: RNCC: 5 | RNVC: 9

22 Jun 1985

3040-01-211-1039
Helical Gearshaft

012111039
915148: RNCC: 3 | RNVC: 2

21 Jun 1985

3040-01-211-5614
Shouldered Shaft

012115614
387-3550: RNCC: 3 | RNVC: 2
387-3550: RNCC: 3 | RNVC: 9
387-3550: RNCC: 5 | RNVC: 9
387-3550: RNCC: 5 | RNVC: 9

28 Jun 1985

3040-01-212-2525
Transmission Sleeve

012122525
L6411230-041: RNCC: 3 | RNVC: 2

10 Jul 1985

3040-01-211-9974
Straight Shaft

012119974
384-1056-00: RNCC: 3 | RNVC: 2

5 Jul 1985

3040-01-213-2401
Discriminator

012132401
9370140-2: RNCC: 3 | RNVC: 2

24 Jul 1985

3040-01-213-5570
Shouldered Shaft

012135570
3171936-1: RNCC: 3 | RNVC: 2

27 Jul 1985

3040-01-213-4628
Rigid Connecting Link

012134628
4062343: RNCC: 3 | RNVC: 2
4062343: RNCC: 5 | RNVC: 2
4062343: RNCC: 5 | RNVC: 9

26 Jul 1985

3040-01-213-2939
Shouldered Shaft

012132939
751860-1-1: RNCC: 3 | RNVC: 2

25 Jul 1985

3040-01-214-1604
Control Cam

012141604
23018023: RNCC: 3 | RNVC: 2
23018023: RNCC: 8 | RNVC: 2

6 Aug 1985

3040-01-214-3864
Brake Apply-Stationary Cam

012143864
23018110: RNCC: 3 | RNVC: 2
23018110: RNCC: 8 | RNVC: 2

9 Aug 1985

3040-01-214-3861
Mechanical Drive Housing

012143861
23018100: RNCC: 3 | RNVC: 2
23018100: RNCC: 8 | RNVC: 2

9 Aug 1985

3040-01-216-2402
Linear Actuating Cylinder Piston

012162402
2518493: RNCC: 3 | RNVC: 2
2518493: RNCC: 5 | RNVC: 9

7 Sep 1985

3040-01-216-3952
Shouldered Shaft

012163952
23018157: RNCC: 3 | RNVC: 2
23018157: RNCC: 8 | RNVC: 2

10 Sep 1985

3040-01-218-2915
Rigid Connecting Link

012182915
4900-145: RNCC: 3 | RNVC: 2
B889100-145: RNCC: 3 | RNVC: 2
75J618002-145: RNCC: 5 | RNVC: 9
4900-145-M: RNCC: 5 | RNVC: 9
75B618002-145: RNCC: 7 | RNVC: 2

10 Oct 1985

3040-01-219-1530
Counterbalance Weight

012191530
8019129-001: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-1538
Counterbalance Weight

012191538
8019129-010: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-220-0090
Linear Actuating Cylinder

012200090
R0BRIC-3: RNCC: 3 | RNVC: 2
R0BR1C-3: RNCC: C | RNVC: 1

6 Nov 1985

3040-01-220-6083
Detent Plate

012206083
3-4284-800: RNCC: 3 | RNVC: 2
269-8075-010: RNCC: 3 | RNVC: 2

16 Nov 1985

3040-01-221-5684
Manual Control Lever

012215684
39454: RNCC: 3 | RNVC: 2

29 Nov 1985

3040-01-221-9320
Counterbalance Weight

012219320
8019131-031: RNCC: 3 | RNVC: 9

5 Dec 1985

3040-01-221-9321
Counterbalance Weight

012219321
8019131-032: RNCC: 3 | RNVC: 9

5 Dec 1985

3040-01-223-0916
Shouldered Shaft

012230916
723643: RNCC: 3 | RNVC: 2
723643: RNCC: 5 | RNVC: 9
723643: RNCC: 5 | RNVC: 9

21 Dec 1985

3040-01-223-2607
Rigid Connecting Link

012232607
12313527: RNCC: 3 | RNVC: 2
12313527: RNCC: 5 | RNVC: 2
12313527: RNCC: 5 | RNVC: 2
12313527: RNCC: 5 | RNVC: 9

24 Dec 1985

3040-01-224-2194
Counterbalance Weight

012242194
2664015: RNCC: 3 | RNVC: 2

14 Jan 1986

3040-01-225-5957
Rigid Connecting Link

012255957
12329258: RNCC: 3 | RNVC: 2
10085879: RNCC: 6 | RNVC: 9

4 Feb 1986

3040-01-226-8041
Rigid Connecting Link

012268041
1415130: RNCC: 3 | RNVC: 2
1415130: RNCC: 5 | RNVC: 9

22 Feb 1986

3040-01-227-7369
Rotating Shaft Eye Bracket

012277369
16-01-067-012: RNCC: 3 | RNVC: 2
2CX239: RNCC: 5 | RNVC: 2
2CX239: RNCC: 5 | RNVC: 9

7 Mar 1986

3040-01-228-1080
Straight Shaft

012281080
522808: RNCC: 3 | RNVC: 2

14 Mar 1986

3040-01-228-4209
Linear Actuating Cylinder Assembly

012284209
AG146147D0: RNCC: 3 | RNVC: 2
1H000076648: RNCC: 5 | RNVC: 2
2 1/2CFH-2HLTVS13CX87.000: RNCC: 5 | RNVC: 9

18 Mar 1986

3040-01-230-5575
Linear Actuating Cylinder Assembly Parts Kit

012305575
8407-044: RNCC: 3 | RNVC: 2
430855B: RNCC: 3 | RNVC: 2
2CT276: RNCC: 5 | RNVC: 2
430855B: RNCC: 5 | RNVC: 2
430855B: RNCC: 5 | RNVC: 9
430855B: RNCC: 5 | RNVC: 9
2CT276: RNCC: 5 | RNVC: 9
8310-009: RNCC: D | RNVC: 9

16 Apr 1986

3040-01-230-5850
Spur Gearshaft

012305850
12524148: RNCC: 3 | RNVC: 2

16 Apr 1986

3040-01-230-9081
Rigid Connecting Link

012309081
20225: RNCC: 3 | RNVC: 2
20225: RNCC: 5 | RNVC: 9

19 Apr 1986

3040-01-232-5300
Straight Shaft

012325300
60244-40988: RNCC: 3 | RNVC: 2
60244-40988: RNCC: 3 | RNVC: 9

16 May 1986

3040-01-235-3137
Spur Gearshaft

012353137
8365300: RNCC: 3 | RNVC: 2
8365300: RNCC: 3 | RNVC: 9

27 Jun 1986

3040-01-236-3492
Rod Assembly

012363492
4F43741-103B: RNCC: 3 | RNVC: 2
4F43741-103B: RNCC: 5 | RNVC: 2

16 Jul 1986

3040-01-237-6265
Shouldered Shaft

012376265
406 264 29 18: RNCC: 3 | RNVC: 2
406 264 29 18: RNCC: 5 | RNVC: 2
406 264 29 18: RNCC: 5 | RNVC: 9

3 Aug 1986

3040-01-239-1846
Rotating Shaft Eye Bracket

012391846
12350191: RNCC: 3 | RNVC: 2

26 Aug 1986

3040-01-240-2833
Linear Actuating Cylinder Assembly

012402833
G109140: RNCC: 3 | RNVC: 2
G109140: RNCC: 5 | RNVC: 2

11 Sep 1986

3040-01-240-3568
Spur Gearshaft

012403568
801338: RNCC: 3 | RNVC: 2
801338: RNCC: 5 | RNVC: 2
801338: RNCC: 5 | RNVC: 2
742355: RNCC: E | RNVC: 8

12 Sep 1986

3040-01-240-3519
Counterbalance Weight

012403519
301-332-515-0: RNCC: 3 | RNVC: 2
301-332-515-0: RNCC: 5 | RNVC: 2

12 Sep 1986

3040-01-241-2032
Hydraulic Swivel Valve

012412032
BM-S-542: RNCC: 3 | RNVC: 9
S-542VM: RNCC: 5 | RNVC: 2
S-542: RNCC: 5 | RNVC: 9

23 Sep 1986

3040-01-243-3875
Remote Control Lever

012433875
12349732-2: RNCC: 3 | RNVC: 2

24 Oct 1986

3040-01-244-3100
Mechanical Drive Housing

012443100
SK-3806-16A: RNCC: 3 | RNVC: 2
SK-3806-16: RNCC: 5 | RNVC: 9

9 Nov 1986

3040-01-244-4776
Manual Control Lever

012444776
16103450: RNCC: 3 | RNVC: 2
16103450: RNCC: 3 | RNVC: 9

14 Nov 1986

3040-01-246-1634
Spur Gearshaft

012461634
742832: RNCC: 3 | RNVC: 2

10 Dec 1986

3040-01-246-0998
Rotating Shaft Eye Bracket

012460998
12357364: RNCC: 3 | RNVC: 2

9 Dec 1986

3040-01-246-7650
Shouldered Shaft

012467650
1395AS212-2: RNCC: 3 | RNVC: 2
1395AS212: RNCC: 5 | RNVC: 9
1395AS212-2: RNCC: D | RNVC: 9

18 Dec 1986

3040-01-247-5671
Rigid Connecting Link

012475671
209-001-358-101: RNCC: 3 | RNVC: 2
209-001-358: RNCC: D | RNVC: 9

8 Jan 1987

3040-01-247-7793
Straight Shaft

012477793
N8634: RNCC: 3 | RNVC: 2

12 Jan 1987

3040-01-248-3885
Shouldered Shaft

012483885
609148-1-RB: RNCC: 3 | RNVC: 2
609148-1-RB: RNCC: 5 | RNVC: 9
609148-1-R8: RNCC: 5 | RNVC: 9

23 Jan 1987

3040-01-246-7846
Shouldered Shaft

012467846
1395AS231: RNCC: 3 | RNVC: 2

18 Dec 1986

3040-01-250-4225
Shouldered Shaft

012504225
610531-59-R: RNCC: 3 | RNVC: 9
610531-59-R: RNCC: C | RNVC: 1

1 Mar 1987

3040-01-250-5003
Shaft Coupling

012505003
10069-1108: RNCC: 3 | RNVC: 2

3 Mar 1987

3040-01-251-8878
Counterbalance Weight

012518878
A334A200-105: RNCC: 3 | RNVC: 2

25 Mar 1987

3040-01-251-0557
Shouldered Shaft

012510557
9377156: RNCC: 3 | RNVC: 2

11 Mar 1987

3040-01-251-9449
Shaft Retaining Plate

012519449
12268269: RNCC: 3 | RNVC: 2

26 Mar 1987

3040-01-130-0721
Straight Shaft

011300721
603226-2-A: RNCC: 3 | RNVC: 2
603226-2-A: RNCC: 3 | RNVC: 9

15 Apr 1982

3040-01-130-5633
Pawl

011305633
7839444-01: RNCC: 3 | RNVC: 9
7839444: RNCC: D | RNVC: 9

28 Apr 1982

3040-01-131-0428
Straight Shaft

011310428
65396-04001-102: RNCC: 3 | RNVC: 2
65396-04001-102: RNCC: 5 | RNVC: 2

3 May 1982

3040-01-131-0071
Rigid Connecting Link

011310071
2040893-1: RNCC: 3 | RNVC: 2
2040893-1: RNCC: 5 | RNVC: 2
10106884: RNCC: 6 | RNVC: 9
2040893: RNCC: D | RNVC: 9

1 May 1982

3040-01-132-4761
Straight Shaft

011324761
8N3251: RNCC: 3 | RNVC: 2

30 May 1982

3040-01-131-6008
Straight Shaft

011316008
A150545: RNCC: 3 | RNVC: 2
A57532: RNCC: C | RNVC: 1
60-21497: RNCC: C | RNVC: 1

13 May 1982

3040-01-133-4198
Push-Pull Control Assembly

011334198
1949-K500-2010: RNCC: 3 | RNVC: 2
K-500-2010: RNCC: 3 | RNVC: 2
D044195-3-142: RNCC: 5 | RNVC: 9

13 Jun 1982

3040-01-133-4622
Spur Gearshaft

011334622
132D1702: RNCC: 3 | RNVC: 2
10106889: RNCC: 6 | RNVC: 9

15 Jun 1982

3040-01-134-6544
Linear Actuating Cylinder Cap

011346544
12270450: RNCC: 3 | RNVC: 2

7 Jul 1982

3040-01-134-7123
Control Cam

011347123
12312307: RNCC: 3 | RNVC: 2
12312307: RNCC: D | RNVC: 9

8 Jul 1982

3040-01-135-1476
Bell Crank Support

011351476
65413-07202-041: RNCC: 3 | RNVC: 2

18 Jul 1982

3040-01-134-9429
Body Hub

011349429
104ADET9: RNCC: 3 | RNVC: 9

14 Jul 1982

3040-01-135-1593
Bell Crank

011351593
65413-07201-041: RNCC: 3 | RNVC: 2

18 Jul 1982

3040-01-136-1462
Bevel Gearshaft

011361462
65395-07022-101: RNCC: 3 | RNVC: 2

4 Aug 1982

3040-01-136-3108
Hydraulic Accumulator

011363108
ACB-307239B: RNCC: 3 | RNVC: 2
ACB307239A: RNCC: 5 | RNVC: 9
ACB307239A: RNCC: 5 | RNVC: 9
ACB307239A: RNCC: 5 | RNVC: 9
ACC307226A: RNCC: 5 | RNVC: 9

6 Aug 1982

3040-01-136-1463
Spur Gearshaft

011361463
64351-11088-102: RNCC: 3 | RNVC: 2

4 Aug 1982

3040-01-136-4414
Bell Crank

011364414
65410-03210-046: RNCC: 3 | RNVC: 2

8 Aug 1982

3040-01-136-8767
Straight Shaft

011368767
102-218-080-420-002: RNCC: 3 | RNVC: 2
14-22-2-1 PC 5: RNCC: 5 | RNVC: 2
819-080-420-040: RNCC: C | RNVC: 1
14-22-2-1: RNCC: D | RNVC: 9

17 Aug 1982

3040-01-138-6563
Manual Control Lever

011386563
2617116: RNCC: 3 | RNVC: 2

17 Sep 1982

3040-01-139-2396
Spur Gearshaft

011392396
131D5019P02: RNCC: 3 | RNVC: 9
131D5019P02: RNCC: 5 | RNVC: 2
131D5019P02: RNCC: 5 | RNVC: 2

27 Sep 1982

3040-01-139-3092
Ecentric Cam

011393092
13155027-2: RNCC: 3 | RNVC: 2
13155027-2: RNCC: 5 | RNVC: 1
13155027-2: RNCC: 5 | RNVC: 1

29 Sep 1982

3040-01-139-5832
Rigid Connecting Link

011395832
65410-00014-046: RNCC: 3 | RNVC: 2

4 Oct 1982

3040-01-139-7283
Hook Assembly Fixture Shoe

011397283
74D130016-2023: RNCC: 3 | RNVC: 2
74D130016-2023: RNCC: 5 | RNVC: 9

5 Oct 1982

3040-01-140-3192
Straight Shaft

011403192
172B4311P1: RNCC: 3 | RNVC: 2
10106911: RNCC: 6 | RNVC: 9

11 Oct 1982

3040-01-140-3504
Control Cam

011403504
2664171: RNCC: 3 | RNVC: 2
10158994: RNCC: 6 | RNVC: 9

11 Oct 1982

3040-01-142-4295
Pivot Shaft

011424295
2771568-101: RNCC: 3 | RNVC: 2
2771568-101: RNCC: 3 | RNVC: 9
2771568-101: RNCC: 5 | RNVC: 9

16 Nov 1982

3040-01-144-4386
Bell Crank

011444386
74A635603-1005: RNCC: 3 | RNVC: 2
74A635603-1005: RNCC: 5 | RNVC: 2
74A635603-1003: RNCC: 5 | RNVC: 9
74A635603-1001: RNCC: 5 | RNVC: 9
10106932: RNCC: 6 | RNVC: 9
74A635603-1001: RNCC: C | RNVC: 1
74A635603: RNCC: D | RNVC: 9

20 Dec 1982

3040-01-144-4387
Bell Crank

011444387
65861-04176-041: RNCC: 3 | RNVC: 2
65861-04176-041: RNCC: 5 | RNVC: 9

20 Dec 1982

3040-01-145-3415
Shouldered Shaft

011453415
8261851: RNCC: 3 | RNVC: 2

10 Jan 1983

3040-01-147-1068
Body Hub

011471068
196B7669: RNCC: 3 | RNVC: 9
196B7669: RNCC: 5 | RNVC: 2
10106935: RNCC: 6 | RNVC: 9

10 Feb 1983

3040-01-147-1185
Manual Control Lever

011471185
3000740: RNCC: 3 | RNVC: 2

11 Feb 1983

3040-01-148-1641
Shaft Collar

011481641
12316989: RNCC: 3 | RNVC: 2
12307472: RNCC: E | RNVC: 8

1 Mar 1983

3040-01-148-7579
Flexible Shaft Assembly

011487579
FAUSG12PZ1: RNCC: 3 | RNVC: 2
S19430-601: RNCC: 3 | RNVC: 2
19430-601: RNCC: 5 | RNVC: 2
331-19430: RNCC: 5 | RNVC: 9
15908Y1: RNCC: 5 | RNVC: 9
15908Y1: RNCC: 5 | RNVC: 9
10130518: RNCC: 6 | RNVC: 9
132D1805: RNCC: 7 | RNVC: 2

11 Mar 1983

3040-01-149-6739
Straight Shaft

011496739
11V-102-S20: RNCC: 3 | RNVC: 2
465-080-470: RNCC: 3 | RNVC: 2
200113Z PIECE 325-15: RNCC: 5 | RNVC: 2
292050J22: RNCC: 5 | RNVC: 9
200113Z: RNCC: D | RNVC: 9

24 Mar 1983

3040-01-149-7445
Shouldered Shaft

011497445
2022976-3-2: RNCC: 3 | RNVC: 2
2022976-3-1: RNCC: 5 | RNVC: 9
3040PL0667063: RNCC: 6 | RNVC: 9
3040PL1601282: RNCC: 6 | RNVC: 9
16VM003003-11: RNCC: 7 | RNVC: 2

25 Mar 1983

3040-01-150-5401
Spur Gearshaft

011505401
2AL547: RNCC: 3 | RNVC: 2
113321: RNCC: 5 | RNVC: 2
2AL547: RNCC: 5 | RNVC: 9

6 Apr 1983

3040-01-151-0825
Spur Gearshaft

011510825
727113: RNCC: 3 | RNVC: 2
727113: RNCC: 5 | RNVC: 2

12 Apr 1983

3040-01-151-0881
Bell Crank

011510881
6045T30P01: RNCC: 3 | RNVC: 2
10158659: RNCC: 6 | RNVC: 9

12 Apr 1983

3040-01-151-9348
Tachometer Drive Shaft

011519348
21690800: RNCC: 3 | RNVC: 2
216908: RNCC: 5 | RNVC: 9
21690800: RNCC: 5 | RNVC: 9
5730874: RNCC: 5 | RNVC: 9

25 Apr 1983

3040-01-153-1668
Rigid Connecting Link

011531668
65661-06260-045: RNCC: 3 | RNVC: 2

13 May 1983

3040-01-153-7745
Bell Crank Support

011537745
65415-11101-042: RNCC: 3 | RNVC: 2

16 May 1983

3040-01-154-1782
Rigid Connecting Link

011541782
65410-00014-068: RNCC: 3 | RNVC: 2

20 May 1983

3040-01-154-8102
Valve Shaft

011548102
146571: RNCC: 3 | RNVC: 2

31 May 1983

3040-01-154-6454
Spur Gearshaft

011546454
6321-0130-01: RNCC: 3 | RNVC: 2
10106949: RNCC: 6 | RNVC: 9
6321-0130: RNCC: D | RNVC: 9

28 May 1983

3040-01-155-9126
Counterbalance Weight

011559126
34026396-131: RNCC: 3 | RNVC: 2
34026396-131: RNCC: 5 | RNVC: 9

16 Jun 1983

3040-01-156-9602
Straight Shaft

011569602
1352770: RNCC: 3 | RNVC: 2
1352770: RNCC: 5 | RNVC: 9

28 Jun 1983

3040-01-156-9308
Linear Actuating Cylinder Cap

011569308
74A620044-1003: RNCC: 3 | RNVC: 2
10106952: RNCC: 6 | RNVC: 9

27 Jun 1983

3040-01-157-7934
Straight Shaft

011577934
1816454: RNCC: 3 | RNVC: 2

12 Jul 1983

3040-01-158-3257
Shouldered Shaft

011583257
12321725: RNCC: 3 | RNVC: 2

20 Jul 1983

3040-01-158-6352
Shoe

011586352
501-4457345 ITEM 7: RNCC: 3 | RNVC: 2

26 Jul 1983

3040-01-159-0930
Helical Gearshaft

011590930
9780470: RNCC: 3 | RNVC: 2
9780470: RNCC: 5 | RNVC: 9
9774412: RNCC: D | RNVC: 9

3 Aug 1983

3040-01-159-4842
Segmented Rotor Brake

011594842
73070: RNCC: 3 | RNVC: 2
2AT922: RNCC: 5 | RNVC: 2
02-540-066: RNCC: 5 | RNVC: 2
73070: RNCC: 5 | RNVC: 9
50850: RNCC: D | RNVC: 9

9 Aug 1983

3040-01-161-5122
Shouldered Shaft

011615122
170671: RNCC: 3 | RNVC: 2

7 Sep 1983

3040-01-161-7655
Fan Shaft

011617655
10510389: RNCC: 3 | RNVC: 2
40143-1: RNCC: 5 | RNVC: 2
40143-1: RNCC: 5 | RNVC: 9

10 Sep 1983

3040-01-161-8220
Shouldered Shaft

011618220
70361-05005-102: RNCC: 3 | RNVC: 2

11 Sep 1983

3040-01-163-1573
Straight Shaft

011631573
460902: RNCC: 3 | RNVC: 9

28 Sep 1983

3040-01-163-8699
Shaft Collar

011638699
RE-B102112: RNCC: 3 | RNVC: 2
ASC1539206: RNCC: 5 | RNVC: 9

8 Oct 1983

3040-01-164-3911
Rigid Connecting Link

011643911
USCAAH003-557: RNCC: 3 | RNVC: 2
A-AH64001-557: RNCC: 3 | RNVC: 2
7-211524001-557: RNCC: 3 | RNVC: 2
55080-557: RNCC: 5 | RNVC: 9
7-211524001-557: RNCC: 5 | RNVC: 9
6038-557: RNCC: 5 | RNVC: 9

16 Oct 1983

3040-01-164-5803
Mechanical Drive Housing

011645803
10501498: RNCC: 3 | RNVC: 2

19 Oct 1983

3040-01-165-7897
Shaft Collar

011657897
R49535: RNCC: 3 | RNVC: 2
R49535: RNCC: 3 | RNVC: 9
R49535: RNCC: 5 | RNVC: 9
R49535: RNCC: 5 | RNVC: 9

4 Nov 1983

3040-01-166-2424
Shouldered Shaft

011662424
2006824-1: RNCC: 3 | RNVC: 9
2006824-1: RNCC: 5 | RNVC: 9
3040PL0667082: RNCC: 6 | RNVC: 9
2006824-1: RNCC: C | RNVC: 1

9 Nov 1983

3040-01-166-3174
Wormwheel Spur Gearshaft

011663174
2040802-2: RNCC: 3 | RNVC: 2
2040802-2: RNCC: 5 | RNVC: 9

9 Nov 1983

3040-01-169-1860
Bell Crank

011691860
214-001-501-1: RNCC: 3 | RNVC: 2

4 Jan 1984

3040-01-166-3328
Rigid Connecting Link

011663328
41001543: RNCC: 3 | RNVC: 2

9 Nov 1983

3040-01-170-9205
Straight Shaft

011709205
H305440: RNCC: 3 | RNVC: 2
H305440: RNCC: 3 | RNVC: 9
330207 ITEM 12: RNCC: 5 | RNVC: 2
330207: RNCC: 5 | RNVC: 9
330207 ITEM 12: RNCC: 5 | RNVC: 9
305440: RNCC: 5 | RNVC: 9
305440: RNCC: 5 | RNVC: 9

31 Jan 1984

3040-01-171-0923
Counterbalance Weight

011710923
9513M61P04: RNCC: 3 | RNVC: 2

3 Feb 1984

3040-01-171-2806
Remote Control Lever

011712806
9946M62P02: RNCC: 3 | RNVC: 2

4 Feb 1984

3040-01-172-9361
Control Cam

011729361
2668956: RNCC: 3 | RNVC: 2
2668956: RNCC: 5 | RNVC: 2

28 Feb 1984

3040-01-173-4640
Linear Actuating Cylinder Assembly Parts Kit

011734640
9-752-100321: RNCC: 3 | RNVC: 9
9-752-100321: RNCC: 5 | RNVC: 2

6 Mar 1984

3040-01-174-5962
Spur Gearshaft

011745962
21X1510X5: RNCC: 3 | RNVC: 2
2AW45: RNCC: 5 | RNVC: 2
2AW45: RNCC: 5 | RNVC: 9

21 Mar 1984

3040-01-174-6655
Shouldered Shaft

011746655
212713: RNCC: 3 | RNVC: 2
212713: RNCC: 5 | RNVC: 9
212713: RNCC: 5 | RNVC: 9

21 Mar 1984

3040-01-175-9462
Counterbalance Weight

011759462
9952M59P01: RNCC: 3 | RNVC: 2
9952M59P01: RNCC: 5 | RNVC: 2
9952M59P01: RNCC: 5 | RNVC: 2
9952M59P01: RNCC: 5 | RNVC: 2
9952M59P01: RNCC: 5 | RNVC: 2
9952M59P01: RNCC: 5 | RNVC: 2

6 Apr 1984

3040-01-176-2835
Straight Shaft

011762835
5740220: RNCC: 3 | RNVC: 2
15006: RNCC: 5 | RNVC: 9

10 Apr 1984

3040-01-174-5068
Shouldered Shaft

011745068
A1162: RNCC: 3 | RNVC: 2
D1154 FIND 34: RNCC: 5 | RNVC: 2
A1162-1: RNCC: 5 | RNVC: 9

20 Mar 1984

3040-01-176-8493
Straight Shaft

011768493
15743: RNCC: 3 | RNVC: 2
V-105: RNCC: 5 | RNVC: 9

17 Apr 1984

3040-01-176-9613
Push-Pull Control Assembly

011769613
130-032-497: RNCC: 3 | RNVC: 2
13216E6328-1: RNCC: 5 | RNVC: 2
130-032-497: RNCC: 5 | RNVC: 9
13216E6328: RNCC: 7 | RNVC: 1

18 Apr 1984

3040-01-180-9172
Nonrotating Shaft Eye Bracket

011809172
13075738: RNCC: 3 | RNVC: 2
13075738: RNCC: 5 | RNVC: 9

5 Jun 1984

3040-01-181-8614
Ball Joint

011818614
AP-2543: RNCC: 3 | RNVC: 2

16 Jun 1984

3040-01-183-6865
Linear Actuating Cylinder Assembly

011836865
12325845: RNCC: 3 | RNVC: 2

8 Jul 1984

3040-01-184-1872
Hydraulic Accumulator Cylinder

011841872
RC254: RNCC: 3 | RNVC: 2

17 Jul 1984

3040-01-185-6354
Shouldered Shaft

011856354
4900T20P01: RNCC: 3 | RNVC: 2

1 Aug 1984

3040-01-186-1393
Motor Brake

011861393
A-41705: RNCC: 3 | RNVC: 2
41705: RNCC: 5 | RNVC: 2

8 Aug 1984

3040-01-186-1371
Shouldered Shaft

011861371
242432: RNCC: 3 | RNVC: 2
242432: RNCC: 5 | RNVC: 2

8 Aug 1984

3040-01-138-8135
Manual Control Lever

011388135
MC14730: RNCC: 3 | RNVC: 2
MC14730: RNCC: 5 | RNVC: 9
MC14730: RNCC: 5 | RNVC: 9
10106900: RNCC: 6 | RNVC: 9

21 Sep 1982

3040-01-167-2836
Straight Shaft

011672836
8625736: RNCC: 3 | RNVC: 2
5740382: RNCC: 5 | RNVC: 2
8625736: RNCC: 5 | RNVC: 9

24 Nov 1983

3040-01-177-2941
Flexible Shaft Assembly Core

011772941
75A603508-2001: RNCC: 3 | RNVC: 2
DS23/2-125.100: RNCC: 5 | RNVC: 2
DS23/2-125.125: RNCC: 5 | RNVC: 9
75A603508-2001: RNCC: 5 | RNVC: 9

22 Apr 1984

3040-01-178-5055
Rigid Connecting Link

011785055
7-311518010: RNCC: 3 | RNVC: 2
7-311518010: RNCC: 5 | RNVC: 9

5 May 1984

3040-01-179-5076
Shouldered Shaft

011795076
P202481: RNCC: 3 | RNVC: 2
P202481: RNCC: 3 | RNVC: 9

19 May 1984

3040-01-179-5080
Shouldered Shaft

011795080
P204614N: RNCC: 3 | RNVC: 2
P204614N: RNCC: 3 | RNVC: 9

19 May 1984

3040-01-179-5094
Remote Control Lever

011795094
P302941: RNCC: 3 | RNVC: 2
P302941: RNCC: 3 | RNVC: 9

19 May 1984

3040-01-179-9222
Bell Crank

011799222
12332232: RNCC: 3 | RNVC: 2
13211E9410: RNCC: 5 | RNVC: 9

22 May 1984

3040-01-179-9889
Shouldered Shaft

011799889
REC49501: RNCC: 3 | RNVC: 2
D20-1-1 ITEM 18: RNCC: 5 | RNVC: 2
ASC1537568: RNCC: 5 | RNVC: 9

23 May 1984

3040-01-179-9223
Bell Crank

011799223
12332239: RNCC: 3 | RNVC: 2
13211E9412: RNCC: 5 | RNVC: 9

22 May 1984

3040-01-180-2992
Control Cam

011802992
16106612N: RNCC: 3 | RNVC: 2
16106612N: RNCC: 3 | RNVC: 9
16106612: RNCC: 5 | RNVC: 9

25 May 1984

3040-01-176-5998
Hub Clamp

011765998
30-00243-002: RNCC: 3 | RNVC: 2
30-00243-002: RNCC: 5 | RNVC: 2

13 Apr 1984

3040-01-149-4783
Rigid Connecting Link

011494783
65410-00014-067: RNCC: 3 | RNVC: 2

21 Mar 1983

3040-01-156-9134
Control Quadrant Shaft

011569134
4L5937-1: RNCC: 3 | RNVC: 2
4L5937-1: RNCC: 5 | RNVC: 9

27 Jun 1983

3040-01-152-7838
Linear Actuating Cylinder Piston

011527838
4674924-0001: RNCC: 3 | RNVC: 2
522-4674924 ITEM 1: RNCC: 5 | RNVC: 2
37-33-7064: RNCC: 5 | RNVC: 9
522-4674924: RNCC: D | RNVC: 9

7 May 1983

3040-01-154-4048
Shouldered Shaft

011544048
536R563H01: RNCC: 3 | RNVC: 2

25 May 1983

3040-01-154-9976
Shouldered Shaft

011549976
10501229: RNCC: 3 | RNVC: 2

4 Jun 1983

3040-01-156-0824
Flap Shaft Assembly

011560824
2022616-10-2: RNCC: 3 | RNVC: 2
2022616-10-2: RNCC: 5 | RNVC: 9
10318124: RNCC: 6 | RNVC: 9

19 Jun 1983

3040-01-156-0825
Flap Shaft Assembly

011560825
2022616-5-2: RNCC: 3 | RNVC: 2
2022616-5-2: RNCC: 5 | RNVC: 9
2022616-5-1: RNCC: E | RNVC: 8
2022616-5-1: RNCC: E | RNVC: 8

19 Jun 1983

3040-01-166-1185
Cam

011661185
8922970: RNCC: 3 | RNVC: 2
B8922970: RNCC: 5 | RNVC: 2
PC5180323: RNCC: 5 | RNVC: 9
K5180323: RNCC: 5 | RNVC: 9
5180323: RNCC: 5 | RNVC: 9
PC8922970: RNCC: 5 | RNVC: 9
K-8922970: RNCC: 5 | RNVC: 9
5180323: RNCC: 5 | RNVC: 9

8 Nov 1983

3040-01-167-8326
Pawl

011678326
12524384: RNCC: 3 | RNVC: 2
465-4384: RNCC: 5 | RNVC: 2
465-4384: RNCC: 5 | RNVC: 9

7 Dec 1983

3040-01-177-9201
Rigid Connecting Link

011779201
75A613630-1001: RNCC: 3 | RNVC: 2
75A613630: RNCC: D | RNVC: 9

28 Apr 1984

3040-01-178-9928
Shaft Retaining Plate

011789928
B135709-1: RNCC: 3 | RNVC: 2

12 May 1984

3040-01-179-1410
Mechanical Drive Housing

011791410
13211E8708: RNCC: 3 | RNVC: 2
13211E8708: RNCC: 3 | RNVC: 2

16 May 1984

3040-01-179-6183
Manual Control Lever

011796183
2247G1255: RNCC: 3 | RNVC: 2
372-D-238: RNCC: 5 | RNVC: 9
2247G1255: RNCC: 5 | RNVC: 9
327-D-238: RNCC: C | RNVC: 1

19 May 1984

3040-01-179-7029
Rigid Connecting Link

011797029
75A460003-1005: RNCC: 3 | RNVC: 2
75A460003-1005: RNCC: 5 | RNVC: 2
75A460003-1005: RNCC: 5 | RNVC: 9
75A460003-1005: RNCC: 5 | RNVC: 9

20 May 1984

3040-01-179-9211
Straight Shaft

011799211
12325793: RNCC: 3 | RNVC: 2
13211E9402: RNCC: 5 | RNVC: 9

22 May 1984

3040-01-179-9220
Bell Crank

011799220
12332097-1: RNCC: 3 | RNVC: 2
13211E9407: RNCC: 5 | RNVC: 9

22 May 1984

3040-01-129-8476
Bell Crank

011298476
65410-03110-044: RNCC: 3 | RNVC: 2

12 Apr 1982

3040-01-130-3761
Pawl

011303761
139B-18C: RNCC: 3 | RNVC: 2

21 Apr 1982

3040-01-130-3762
Rigid Connecting Link

011303762
74A733030-2001: RNCC: 3 | RNVC: 2
3930AS522: RNCC: 3 | RNVC: 2
74A733030-2001: RNCC: 5 | RNVC: 2
74A733030-2001: RNCC: 5 | RNVC: 2
74A733030-2001: RNCC: 5 | RNVC: 2
74A733030-2001: RNCC: 5 | RNVC: 2
10106874: RNCC: 6 | RNVC: 9
PL74A733030: RNCC: D | RNVC: 9
74A733030: RNCC: D | RNVC: 9

21 Apr 1982

3040-01-130-6865
Bevel Gearshaft

011306865
2040872-1: RNCC: 3 | RNVC: 2
2040872-1: RNCC: 5 | RNVC: 9
10106877: RNCC: 6 | RNVC: 9
2040872: RNCC: D | RNVC: 9

28 Apr 1982

3040-01-131-0600
Rigid Connecting Link

011310600
65219-09041-041: RNCC: 3 | RNVC: 2

3 May 1982

3040-01-133-7136
Shouldered Shaft

011337136
460011: RNCC: 3 | RNVC: 2
460011: RNCC: 3 | RNVC: 9
460011: RNCC: 5 | RNVC: 9
46001: RNCC: 5 | RNVC: 9
453700-9: RNCC: 5 | RNVC: 9
453700: RNCC: D | RNVC: 9

19 Jun 1982

3040-01-135-1355
Shouldered Shaft

011351355
65396-12208-102: RNCC: 3 | RNVC: 2
665396-12208-102: RNCC: C | RNVC: 1

18 Jul 1982

3040-01-135-2207
Remote Control Lever

011352207
16181: RNCC: 3 | RNVC: 2

20 Jul 1982

3040-01-139-9900
Body Hub

011399900
12313010: RNCC: 3 | RNVC: 2
12313010: RNCC: 5 | RNVC: 9

7 Oct 1982

3040-01-140-6605
Mechanical Drive Housing

011406605
62568: RNCC: 3 | RNVC: 2

16 Oct 1982

3040-01-140-8701
Brake Assortment

011408701
6-2011900: RNCC: 3 | RNVC: 2
2-01190: RNCC: 5 | RNVC: 2
2-1190: RNCC: 5 | RNVC: 9

20 Oct 1982

3040-01-141-3708
Straight Shaft

011413708
1145-133-1: RNCC: 3 | RNVC: 2

27 Oct 1982

3040-01-142-9052
Bell Crank

011429052
65414-03105-051: RNCC: 3 | RNVC: 2

22 Nov 1982

3040-01-141-7812
Shaft Collar

011417812
NA1035: RNCC: 3 | RNVC: 2
PL6.0SL-3 ITEM35B: RNCC: 5 | RNVC: 2

4 Nov 1982

3040-01-143-3374
Counterbalance Weight

011433374
4069T98P06: RNCC: 3 | RNVC: 2

2 Dec 1982

3040-01-142-8751
Shouldered Shaft

011428751
132D1906: RNCC: 3 | RNVC: 2
10106924: RNCC: 6 | RNVC: 9

22 Nov 1982

3040-01-143-9971
Shouldered Shaft

011439971
74A800616-2005: RNCC: 3 | RNVC: 2
10106929: RNCC: 6 | RNVC: 9
74A800616-2003: RNCC: C | RNVC: 1

13 Dec 1982

3040-01-144-2527
Manual Control Lever

011442527
Z144B046: RNCC: 3 | RNVC: 2

16 Dec 1982

3040-01-144-4263
Counterbalance Weight

011444263
4055T34P01: RNCC: 3 | RNVC: 2

20 Dec 1982

3040-01-144-4877
Shaft Retaining Plate

011444877
13211E3034: RNCC: 3 | RNVC: 2

21 Dec 1982

3040-01-144-8217
Shouldered Shaft

011448217
111295D: RNCC: 3 | RNVC: 2
111295D: RNCC: 5 | RNVC: 9

30 Dec 1982

3040-01-144-6357
Shouldered Shaft

011446357
1315270: RNCC: 3 | RNVC: 2
1315270: RNCC: 5 | RNVC: 9

27 Dec 1982

3040-01-144-9542
Remote Control Lever

011449542
517-660700: RNCC: 3 | RNVC: 2
5-17-6607: RNCC: 3 | RNVC: 9

31 Dec 1982

3040-01-148-2629
Mechanical Drive Housing

011482629
176211B: RNCC: 3 | RNVC: 9
176211B00: RNCC: 5 | RNVC: 2

3 Mar 1983

3040-01-148-1513
Rigid Connecting Link

011481513
65410-00014-063: RNCC: 3 | RNVC: 2

1 Mar 1983

3040-01-149-1015
Linear Actuating Cylinder Assembly

011491015
H-095-DUZ: RNCC: 3 | RNVC: 9

15 Mar 1983

3040-01-145-2751
Rigid Connecting Link

011452751
65410-00014-051: RNCC: 3 | RNVC: 2

8 Jan 1983

3040-01-150-4724
Coupling Shaft

011504724
BL-10214-1: RNCC: 3 | RNVC: 2

5 Apr 1983

3040-01-151-3532
Shouldered Shaft

011513532
037-71940: RNCC: 3 | RNVC: 2
037-71940-0: RNCC: 5 | RNVC: 2

16 Apr 1983

3040-01-151-5646
Load Stop Collar

011515646
8N3256: RNCC: 3 | RNVC: 2

19 Apr 1983

3040-01-151-0886
Worm Shaft

011510886
722125: RNCC: 3 | RNVC: 2

12 Apr 1983

3040-01-151-7758
Bra Magnet Assembly

011517758
K080127-002: RNCC: 3 | RNVC: 2
K80127-2: RNCC: 5 | RNVC: 9
647108181: RNCC: 5 | RNVC: 9

22 Apr 1983

3040-01-151-3939
Linear Actuating Cylinder Head

011513939
32831: RNCC: 3 | RNVC: 2
144EX114: RNCC: 5 | RNVC: 2
144EX114: RNCC: 5 | RNVC: 9

16 Apr 1983

3040-01-152-2529
Pawl

011522529
12317047: RNCC: 3 | RNVC: 2
12297073: RNCC: E | RNVC: 8

29 Apr 1983

3040-01-152-0944
Bell Crank

011520944
74A635607-1003: RNCC: 3 | RNVC: 2
74A635607-1003: RNCC: 5 | RNVC: 2
74A635607-1001: RNCC: 5 | RNVC: 9
10106946: RNCC: 6 | RNVC: 9

27 Apr 1983

3040-01-153-1483
Cylinder Hoist Stop

011531483
4674891-0012: RNCC: 3 | RNVC: 2
4674891-0012: RNCC: 3 | RNVC: 2
522-4674891 ITEM 12: RNCC: 5 | RNVC: 2
37-33-7848: RNCC: 5 | RNVC: 9
508-4674154 ITE: RNCC: C | RNVC: 1
522-4674891: RNCC: D | RNVC: 9

13 May 1983

3040-01-152-9849
Rigid Connecting Link

011529849
75A427108-1001: RNCC: 3 | RNVC: 9
75A427108-1001: RNCC: 5 | RNVC: 2
75A427108-1001: RNCC: C | RNVC: 1

11 May 1983

3040-01-153-1577
Manual Control Lever

011531577
2BA412: RNCC: 3 | RNVC: 2
2BA412: RNCC: 5 | RNVC: 9
20258-A: RNCC: 5 | RNVC: 9

13 May 1983

3040-01-157-8720
Counterbalance Weight

011578720
2663054: RNCC: 3 | RNVC: 2
2663054: RNCC: 5 | RNVC: 2
10158669: RNCC: 6 | RNVC: 9

13 Jul 1983

3040-01-157-7694
Pneumatic Accumulator

011577694
3460-1-41: RNCC: 3 | RNVC: 2
3460-1-33: RNCC: 3 | RNVC: 9
801270: RNCC: 5 | RNVC: 2

12 Jul 1983

3040-01-157-9521
Linear Actuating Cylinder

011579521
2BC842: RNCC: 3 | RNVC: 2
395224: RNCC: 5 | RNVC: 9
2BC842: RNCC: 5 | RNVC: 9

14 Jul 1983

3040-01-158-3071
Control Cam

011583071
12321720: RNCC: 3 | RNVC: 2

20 Jul 1983

3040-01-158-9391
Manual Control Lever

011589391
2AN688: RNCC: 3 | RNVC: 2
45A081: RNCC: 5 | RNVC: 9
2AN688: RNCC: 5 | RNVC: 9

31 Jul 1983

3040-01-158-9179
Rigid Connecting Link

011589179
12329444: RNCC: 3 | RNVC: 2
BML62170: RNCC: 5 | RNVC: 9

31 Jul 1983

3040-01-158-9687
Rigid Connecting Link

011589687
70101-08000-045: RNCC: 3 | RNVC: 2

31 Jul 1983

3040-01-159-5474
Remote Control Lever

011595474
2498209: RNCC: 3 | RNVC: 2
2498209: RNCC: 3 | RNVC: 9
2498209: RNCC: 5 | RNVC: 9

10 Aug 1983

3040-01-159-6810
Spur Gearshaft

011596810
460297: RNCC: 3 | RNVC: 2
460297: RNCC: 5 | RNVC: 2

12 Aug 1983

3040-01-161-0948
Shouldered Shaft

011610948
X73795-A: RNCC: 3 | RNVC: 2
73795-A: RNCC: 3 | RNVC: 9
3302952 ITEM 1: RNCC: 5 | RNVC: 2
X73795-A: RNCC: 5 | RNVC: 9
D81-945-12 PIECE 1: RNCC: 5 | RNVC: 9
B-73795A: RNCC: 5 | RNVC: 9
3302952: RNCC: D | RNVC: 9
D-81-945-12: RNCC: D | RNVC: 9

31 Aug 1983

3040-01-161-1272
Linear Actuating Cylinder Piston

011611272
30420: RNCC: 3 | RNVC: 2
337-26970-ITEM 7: RNCC: 5 | RNVC: 2
337-26970: RNCC: D | RNVC: 9

1 Sep 1983

3040-01-161-1263
Straight Shaft

011611263
2DY746: RNCC: 3 | RNVC: 2
9914.0250: RNCC: 3 | RNVC: 2
9914.0250: RNCC: 5 | RNVC: 2
PL2096A-301 ITEM 12: RNCC: 5 | RNVC: 2
FD1630-ISO-41-23: RNCC: 5 | RNVC: 2
2BA469: RNCC: 5 | RNVC: 9
2DY746: RNCC: 5 | RNVC: 9
2DY476: RNCC: 5 | RNVC: 9
IS0-41-23: RNCC: 5 | RNVC: 9
9914.0261: RNCC: 5 | RNVC: 9

1 Sep 1983

3040-01-161-2349
Brake Backing Plate

011612349
C-36051 ITEM 5: RNCC: 3 | RNVC: 9
A20049: RNCC: 5 | RNVC: 2
B-14638 ITEM 5: RNCC: C | RNVC: 1

3 Sep 1983

3040-01-161-6611
Mechanical Drive Housing

011616611
390798: RNCC: 3 | RNVC: 2
310211: RNCC: 5 | RNVC: 9
310211: RNCC: 5 | RNVC: 9
323211: RNCC: 5 | RNVC: 9
R-246: RNCC: D | RNVC: 9

8 Sep 1983

3040-01-161-8185
Extension Shaft

011618185
74A733565-2009: RNCC: 3 | RNVC: 2
3929AS812-2: RNCC: 5 | RNVC: 2
74A733565-2009: RNCC: 5 | RNVC: 9
10117851: RNCC: 6 | RNVC: 9
3929AS812-2: RNCC: C | RNVC: 1
74A733565-2009: RNCC: C | RNVC: 1

11 Sep 1983

3040-01-162-0675
Shouldered Shaft

011620675
10501491: RNCC: 3 | RNVC: 2

14 Sep 1983

3040-01-162-1046
Manual Control Lever

011621046
68A582024-2003: RNCC: 3 | RNVC: 2

14 Sep 1983

3040-01-163-0717
Shouldered Shaft

011630717
NF12136-500: RNCC: 3 | RNVC: 2

27 Sep 1983

3040-01-163-1018
Bell Crank

011631018
7-311525047: RNCC: 3 | RNVC: 2
7-311525047: RNCC: 3 | RNVC: 9
7-311525047: RNCC: 5 | RNVC: 2
7-311525047: RNCC: 5 | RNVC: 2
7-311525047: RNCC: 5 | RNVC: 2

28 Sep 1983

3040-01-163-4470
Push-Pull Control Assembly

011634470
9504M29P05: RNCC: 1 | RNVC: 2
580-293-005: RNCC: 3 | RNVC: 2
580-293-005: RNCC: 5 | RNVC: 9
580-293-003: RNCC: 5 | RNVC: 9
9504M29P03: RNCC: 5 | RNVC: 9

4 Oct 1983

3040-01-163-7346
Shaft Retaining Plate

011637346
9G0007: RNCC: 3 | RNVC: 2

6 Oct 1983

3040-01-163-7395
Rigid Connecting Link

011637395
4061T02G02: RNCC: 3 | RNVC: 2
4061T02G02: RNCC: 5 | RNVC: 2
4061T02G02: RNCC: 5 | RNVC: 2
4061T02G02: RNCC: 5 | RNVC: 2
10159289: RNCC: 6 | RNVC: 9
4061T02: RNCC: D | RNVC: 9

7 Oct 1983

3040-01-163-8748
Push-Pull Control Assembly

011638748
5191428: RNCC: 3 | RNVC: 2
3040PL0958366: RNCC: 6 | RNVC: 9
5191428: RNCC: C | RNVC: 1

8 Oct 1983

3040-01-164-4176
Wormwheel Spur Gearshaft

011644176
2041514-1: RNCC: 3 | RNVC: 2
2041514-1: RNCC: 5 | RNVC: 9

16 Oct 1983

3040-01-164-8437
Shouldered Shaft

011648437
406-040-516-101: RNCC: 3 | RNVC: 2

21 Oct 1983

3040-01-165-5071
Tube

011655071
68A411803-2005: RNCC: 3 | RNVC: 2

30 Oct 1983

3040-01-164-9284
Differential Carrier Cover And Plug Assembly

011649284
5HB844: RNCC: 3 | RNVC: 2
103536: RNCC: 5 | RNVC: 2
5HB844: RNCC: 5 | RNVC: 9
144EX585: RNCC: 5 | RNVC: 9

22 Oct 1983

3040-01-165-7023
Spur Gearshaft

011657023
12321718: RNCC: 3 | RNVC: 2
12321718: RNCC: 5 | RNVC: 9

3 Nov 1983

3040-01-168-2141
Ball Joint

011682141
L101057: RNCC: 3 | RNVC: 2

14 Dec 1983

3040-01-169-4956
Linear Actuating Cylinder Piston Rod

011694956
9D5516: RNCC: 3 | RNVC: 2

10 Jan 1984

3040-01-166-6618
Outer Assembl Shaft

011666618
4648149: RNCC: 3 | RNVC: 2
4648149: RNCC: 5 | RNVC: 2
4648149: RNCC: 5 | RNVC: 2
4648149: RNCC: 5 | RNVC: 2
4648149: RNCC: 5 | RNVC: 2

16 Nov 1983

3040-01-170-7472
Counterbalance Weight

011707472
7-311422065-3: RNCC: 3 | RNVC: 2
7-311422065-3: RNCC: 5 | RNVC: 9

29 Jan 1984

3040-01-171-0918
Counterbalance Weight

011710918
9528M52P04: RNCC: 3 | RNVC: 2

3 Feb 1984

3040-01-171-8265
Straight Shaft

011718265
12355385: RNCC: 3 | RNVC: 2
12332495: RNCC: 5 | RNVC: 9

14 Feb 1984

3040-01-171-2802
Bell Crank

011712802
9511M24P05: RNCC: 3 | RNVC: 2

4 Feb 1984

3040-01-172-0120
Turbine Engine Vane Actuation Arm

011720120
KT9125M65G01: RNCC: 3 | RNVC: 2
9125M65G01: RNCC: 3 | RNVC: 2
9125M65G01: RNCC: 5 | RNVC: 9
3040PL0832765: RNCC: 6 | RNVC: 9

15 Feb 1984

3040-01-172-2890
Winch Slave Control

011722890
KR516: RNCC: 3 | RNVC: 2
KR760315: RNCC: 5 | RNVC: 2

18 Feb 1984

3040-01-172-4843
Counterbalance Weight

011724843
5045M17P01: RNCC: 3 | RNVC: 2

21 Feb 1984

3040-01-172-6968
Rigid Connecting Link

011726968
95D97-1: RNCC: 3 | RNVC: 2
95D97-1: RNCC: 3 | RNVC: 9

24 Feb 1984

3040-01-173-0547
Counterbalance Weight

011730547
751862-4: RNCC: 3 | RNVC: 2

29 Feb 1984

3040-01-173-0551
Counterbalance Weight

011730551
1590M73G02: RNCC: 3 | RNVC: 2
9921M53P04: RNCC: 5 | RNVC: 2
9921M53P04: RNCC: 5 | RNVC: 9

29 Feb 1984

3040-01-173-0549
Counterbalance Weight

011730549
751862-2: RNCC: 3 | RNVC: 2

29 Feb 1984

3040-01-173-0548
Counterbalance Weight

011730548
751862-3: RNCC: 3 | RNVC: 2

29 Feb 1984

3040-01-173-5467
Spur Gearshaft

011735467
2042105-1: RNCC: 3 | RNVC: 2

7 Mar 1984

3040-01-173-4296
Ball Joint

011734296
82A5027A6620: RNCC: 3 | RNVC: 2
82A5027A6620: RNCC: 5 | RNVC: 9

5 Mar 1984

3040-01-174-5478
Straight Shaft

011745478
12282068: RNCC: 3 | RNVC: 2

21 Mar 1984

3040-01-174-1814
Pushrod Assembly

011741814
123L10012-601: RNCC: 3 | RNVC: 2
123L10012-601: RNCC: 5 | RNVC: 2
123L10012-601B: RNCC: 5 | RNVC: 9
123L10012-601: RNCC: 5 | RNVC: 9
123L10012-601: RNCC: 5 | RNVC: 9
123L10012-601B: RNCC: C | RNVC: 1
123L10012-3: RNCC: E | RNVC: 8

15 Mar 1984

3040-01-175-0060
Detent

011750060
2545230: RNCC: 3 | RNVC: 2

25 Mar 1984

3040-01-175-9122
Bell Crank

011759122
70400-02503-047: RNCC: 3 | RNVC: 2

5 Apr 1984

3040-01-173-7422
Counterbalance Weight

011737422
1522M76P01: RNCC: 3 | RNVC: 2
9527M69P01: RNCC: 5 | RNVC: 2

8 Mar 1984

3040-01-176-8757
Hub Clamp

011768757
12316515: RNCC: 3 | RNVC: 2
3040011768757: RNCC: 6 | RNVC: 9

17 Apr 1984

3040-01-176-9584
Spur Gearshaft

011769584
5740091: RNCC: 3 | RNVC: 2
16091: RNCC: 5 | RNVC: 9
SK31860: RNCC: 5 | RNVC: 9
16069: RNCC: 5 | RNVC: 9

18 Apr 1984

3040-01-177-0082
Pawl

011770082
1276-23-528: RNCC: 3 | RNVC: 2
1276-23-528-99: RNCC: 5 | RNVC: 2
5521011: RNCC: 5 | RNVC: 2
3040PL0834249: RNCC: 6 | RNVC: 9

18 Apr 1984

3040-01-180-9960
Linear Actuating Cylinder Assembly

011809960
J72078B4: RNCC: 3 | RNVC: 9
J72078B4: RNCC: 5 | RNVC: 2

6 Jun 1984

3040-01-181-1840
Straight Shaft

011811840
P12615016: RNCC: 3 | RNVC: 9
P12615016: RNCC: C | RNVC: 1

7 Jun 1984

3040-01-181-3323
Straight Shaft

011813323
P408303: RNCC: 3 | RNVC: 2
P408303: RNCC: 3 | RNVC: 9

8 Jun 1984

3040-01-181-6486
Body Hub

011816486
13215E6597: RNCC: 3 | RNVC: 2

13 Jun 1984

3040-01-181-6528
Spur Gearshaft

011816528
12325741: RNCC: 3 | RNVC: 2

13 Jun 1984

3040-01-181-8591
Rigid Connecting Link

011818591
7514-2205: RNCC: 3 | RNVC: 2
SR10784A-2205: RNCC: 3 | RNVC: 2
7075-13: RNCC: 5 | RNVC: 2
LE162-0002-2205: RNCC: 5 | RNVC: 2
LE162-0002: RNCC: 7 | RNVC: 1

16 Jun 1984

3040-01-182-1306
Linear Actuating Cylinder Assembly

011821306
12325843: RNCC: 3 | RNVC: 2

20 Jun 1984

3040-01-182-4849
Shouldered Shaft

011824849
1203V483: RNCC: 3 | RNVC: 2

24 Jun 1984

3040-01-182-6299
Gearshaft

011826299
305-116-601-0: RNCC: 3 | RNVC: 2

30 Sep 2011

3040-01-182-9029
Rigid Connecting Link

011829029
7-211524001-9: RNCC: 1 | RNVC: 2
6027-1: RNCC: 3 | RNVC: 2
A-AH64001-9: RNCC: 3 | RNVC: 2
55080-9: RNCC: 5 | RNVC: 9
7-211524001-9: RNCC: 5 | RNVC: 9
7-211524001-9: RNCC: 5 | RNVC: 9

30 Jun 1984

3040-01-183-0630
Shaft Collar

011830630
MA3451: RNCC: 3 | RNVC: 2

1 Jul 1984

3040-01-183-2152
Torque Bar

011832152
303929: RNCC: 3 | RNVC: 2
146500AS: RNCC: 5 | RNVC: 9
303929: RNCC: C | RNVC: 1

4 Jul 1984

3040-01-183-8449
Shouldered Shaft

011838449
13204E3415: RNCC: 3 | RNVC: 2

11 Jul 1984

3040-01-183-8489
Manual Control Lever

011838489
12330369-2: RNCC: 3 | RNVC: 2
12330369-2: RNCC: 5 | RNVC: 2
BML61565: RNCC: 5 | RNVC: 2
12330369-2: RNCC: 5 | RNVC: 2
BML61565: RNCC: 5 | RNVC: 2
12330369-2: RNCC: 5 | RNVC: 9

11 Jul 1984

3040-01-184-0527
Helical Gearshaft

011840527
915121: RNCC: 3 | RNVC: 2

13 Jul 1984

3040-01-184-4570
Shouldered Shaft

011844570
2370-0069-1: RNCC: 3 | RNVC: 2
2370-0069: RNCC: 5 | RNVC: 9
2370-0069-1: RNCC: 5 | RNVC: 9
B11405 FIND 5: RNCC: 5 | RNVC: 9
2370-0069: RNCC: 5 | RNVC: 9
B11405: RNCC: D | RNVC: 9

18 Jul 1984

3040-01-184-6854
Shouldered Shaft

011846854
82A5027A1609: RNCC: 3 | RNVC: 2

21 Jul 1984

3040-01-184-9772
Control Cam

011849772
6532C755-1: RNCC: 3 | RNVC: 2
6532C755-1: RNCC: C | RNVC: 1

24 Jul 1984

3040-01-185-3781
Shouldered Shaft

011853781
20428-3050: RNCC: 3 | RNVC: 2
20428-002 FIND 24: RNCC: 5 | RNVC: 9
20428-002: RNCC: D | RNVC: 9

27 Jul 1984

3040-01-185-6700
Shaft Collar

011856700
3161767-9: RNCC: 3 | RNVC: 2
3161767-9: RNCC: 5 | RNVC: 9
10106968: RNCC: 6 | RNVC: 9
3161767: RNCC: D | RNVC: 9

1 Aug 1984

3040-01-185-4178
Piston Ring

011854178
859989-11: RNCC: 3 | RNVC: 2
859989-11: RNCC: 3 | RNVC: 2
859989-11: RNCC: 5 | RNVC: 9

28 Jul 1984

3040-01-129-8380
Brake Disc

011298380
2B1-00196: RNCC: 3 | RNVC: 2
192312: RNCC: 5 | RNVC: 9
2B1-00196: RNCC: 5 | RNVC: 9

12 Apr 1982

3040-01-129-8477
Bell Crank

011298477
65410-03110-045: RNCC: 3 | RNVC: 2

12 Apr 1982

3040-01-129-8478
Bell Crank

011298478
65410-03110-052: RNCC: 3 | RNVC: 2

12 Apr 1982

3040-01-130-3171
Bell Crank

011303171
3930AS541-2: RNCC: 3 | RNVC: 2
3930AS541-2: RNCC: 5 | RNVC: 2
74A733024-2002: RNCC: 5 | RNVC: 9
74A733024-2002: RNCC: 5 | RNVC: 9
10106871: RNCC: 6 | RNVC: 9

19 Apr 1982

3040-01-130-3180
Rigid Connecting Link

011303180
65410-00015-061: RNCC: 3 | RNVC: 2

19 Apr 1982

3040-01-130-2609
Shouldered Shaft

011302609
3929AS584: RNCC: 3 | RNVC: 2
3929AS584: RNCC: 5 | RNVC: 2
74A733554-2003: RNCC: 5 | RNVC: 9
74A733554-2003: RNCC: 5 | RNVC: 9
74A733554-2003: RNCC: 5 | RNVC: 9
10106870: RNCC: 6 | RNVC: 9
74A733554-2003: RNCC: C | RNVC: 1

19 Apr 1982

3040-01-130-6864
Bevel Gearshaft

011306864
2040780-1: RNCC: 3 | RNVC: 2
2040780-1: RNCC: 5 | RNVC: 9
2040780-1: RNCC: 5 | RNVC: 9
10106876: RNCC: 6 | RNVC: 9
2040780: RNCC: D | RNVC: 9

28 Apr 1982

3040-01-130-2028
Push-Pull Control Assembly

011302028
90-3309-240: RNCC: 3 | RNVC: 2
52-0082: RNCC: 5 | RNVC: 2
452-0082: RNCC: 5 | RNVC: 9

17 Apr 1982

3040-01-131-0435
Shouldered Shaft

011310435
65396-12208-101: RNCC: 3 | RNVC: 2

3 May 1982

3040-01-131-5732
Straight Shaft

011315732
1134485: RNCC: 3 | RNVC: 2
1134485: RNCC: 5 | RNVC: 9

13 May 1982

3040-01-134-6476
Rigid Connecting Link

011346476
13218E4218: RNCC: 3 | RNVC: 2

7 Jul 1982

3040-01-135-1949
Bell Crank

011351949
65414-03103-046: RNCC: 3 | RNVC: 2

18 Jul 1982

3040-01-136-4178
Straight Shaft

011364178
65396-07002-102: RNCC: 3 | RNVC: 2

8 Aug 1982

3040-01-136-4943
Brake Disc

011364943
13H96-3: RNCC: 3 | RNVC: 2

10 Aug 1982

3040-01-136-4944
Brake Disc

011364944
13H96-5: RNCC: 3 | RNVC: 2

10 Aug 1982

3040-01-136-8774
Cam Shaft

011368774
870317201: RNCC: 3 | RNVC: 2
E-8709935 PIECE 47: RNCC: 5 | RNVC: 2

17 Aug 1982

3040-01-137-0335
Piston Ring

011370335
M1904CZ: RNCC: 3 | RNVC: 2
M1904CZ: RNCC: 5 | RNVC: 2

19 Aug 1982

3040-01-137-6042
Rigid Connecting Link

011376042
4J13196-101A: RNCC: 3 | RNVC: 2

29 Aug 1982

3040-01-138-3919
Drive Socket

011383919
72D225694-2001: RNCC: 3 | RNVC: 2
72D225694-2001: RNCC: 5 | RNVC: 1

11 Sep 1982

3040-01-140-3194
Straight Shaft

011403194
2040781-1: RNCC: 3 | RNVC: 2
2040781-1: RNCC: 5 | RNVC: 9
10106912: RNCC: 6 | RNVC: 9

11 Oct 1982

3040-01-142-2379
Linear Actuating Cylinder

011422379
A-5821: RNCC: 3 | RNVC: 2

14 Nov 1982

3040-01-143-2906
Remote Control Lever

011432906
20428-3010: RNCC: 3 | RNVC: 2
20428-002 FIND 244: RNCC: 5 | RNVC: 9
20428-002: RNCC: D | RNVC: 9

30 Nov 1982

3040-01-143-3373
Counterbalance Weight

011433373
4069T98P05: RNCC: 3 | RNVC: 2

2 Dec 1982

3040-01-143-5297
Ball Joint

011435297
6072K21: RNCC: 3 | RNVC: 2

6 Dec 1982

3040-01-144-0594
Remote Control Lever

011440594
5035L001-1: RNCC: 3 | RNVC: 2

13 Dec 1982

3040-01-144-8218
Shouldered Shaft

011448218
63219CX: RNCC: 3 | RNVC: 2
63219CX: RNCC: 5 | RNVC: 9

30 Dec 1982

3040-01-145-2640
Roller Shaft Assembly

011452640
BL10697: RNCC: 3 | RNVC: 2

8 Jan 1983

3040-01-147-9052
Linear Actuating Cylinder Assembly Parts Kit

011479052
970-045-000-S12E: RNCC: 3 | RNVC: 2
S12E: RNCC: 5 | RNVC: 2
970-045-000: RNCC: 5 | RNVC: 2

24 Feb 1983

3040-01-147-9320
Hub Clamp

011479320
2009: RNCC: 3 | RNVC: 9
7847257P001: RNCC: C | RNVC: 1

25 Feb 1983

3040-01-149-3334
Shouldered Shaft

011493334
3224151: RNCC: 3 | RNVC: 2
3224145 ITEM 16: RNCC: 5 | RNVC: 2
3224145: RNCC: D | RNVC: 9

18 Mar 1983

3040-01-148-8826
Shouldered Shaft

011488826
908337: RNCC: 3 | RNVC: 2

11 Mar 1983

3040-01-149-5061
Grease Cap

011495061
1605: RNCC: 3 | RNVC: 2
1605: RNCC: 3 | RNVC: 9
605-2476: RNCC: 5 | RNVC: 1
12313048: RNCC: 5 | RNVC: 2
1605-2476: RNCC: 5 | RNVC: 9

22 Mar 1983

3040-01-149-8291
Nonrotating Shaft Eye Bracket

011498291
12316780: RNCC: 3 | RNVC: 2

27 Mar 1983

3040-01-150-0671
Bell Crank

011500671
061276: RNCC: 3 | RNVC: 2
61276: RNCC: 5 | RNVC: 9

29 Mar 1983

3040-01-151-3758
Shouldered Shaft

011513758
B1047: RNCC: 3 | RNVC: 2
D1091 ITEM 26: RNCC: 5 | RNVC: 2

16 Apr 1983

3040-01-151-5664
Speedometer-Tachometer Drive Adapter

011515664
78744-1: RNCC: 3 | RNVC: 2
78744-1: RNCC: 3 | RNVC: 2
78744-1: RNCC: 5 | RNVC: 2
5972797: RNCC: 5 | RNVC: 2
5972797-B: RNCC: D | RNVC: 9

19 Apr 1983

3040-01-152-1063
Shouldered Shaft

011521063
23013456: RNCC: 3 | RNVC: 2

27 Apr 1983

3040-01-152-5274
Shaft Retaining Plate

011525274
62200AX: RNCC: 3 | RNVC: 2
62200AX: RNCC: 5 | RNVC: 9

4 May 1983

3040-01-155-0339
Manual Control Lever

011550339
5-17-6606-00: RNCC: 3 | RNVC: 2
5-17-6606: RNCC: 3 | RNVC: 9
5-14-6606-00: RNCC: 5 | RNVC: 9
N1-086-602-B: RNCC: 5 | RNVC: 9

4 Jun 1983

3040-01-155-0372
Rigid Connecting Link

011550372
14039767: RNCC: 3 | RNVC: 2
14039767: RNCC: 5 | RNVC: 9

4 Jun 1983

3040-01-155-5889
Rigid Connecting Link

011555889
10083-A: RNCC: 3 | RNVC: 9
2BA420: RNCC: 5 | RNVC: 2
2BA420: RNCC: 5 | RNVC: 9

11 Jun 1983

3040-01-155-5179
Rigid Connecting Link

011555179
81000131: RNCC: 3 | RNVC: 2
8000131: RNCC: 3 | RNVC: 2
81-000131: RNCC: 3 | RNVC: 2
NW15508: RNCC: 5 | RNVC: 2
NW15508: RNCC: D | RNVC: 9

10 Jun 1983

3040-01-156-3942
Mechanical Drive Housing

011563942
2498643: RNCC: 3 | RNVC: 2
2498643: RNCC: 3 | RNVC: 9
2498643: RNCC: 5 | RNVC: 9
2498072: RNCC: 5 | RNVC: 9

20 Jun 1983

3040-01-157-2653
Control Cam

011572653
2662044: RNCC: 3 | RNVC: 2
10159076: RNCC: 6 | RNVC: 9

2 Jul 1983

3040-01-157-3624
Manual Control Lever

011573624
4684910-0044: RNCC: 3 | RNVC: 2
709-4684910 ITEM 44: RNCC: 3 | RNVC: 2

4 Jul 1983

3040-01-157-7998
Trans Vent Assembly

011577998
25892279: RNCC: 3 | RNVC: 2
3001284: RNCC: 5 | RNVC: 2
3820840: RNCC: 5 | RNVC: 9
8640496: RNCC: 5 | RNVC: 9
15771000: RNCC: 5 | RNVC: 9
117-3820840: RNCC: 5 | RNVC: 9
3820840: RNCC: 5 | RNVC: 9
3820840: RNCC: 5 | RNVC: 9
8640496: RNCC: 5 | RNVC: 9

12 Jul 1983

3040-01-158-3070
Control Cam

011583070
12321719: RNCC: 3 | RNVC: 2

20 Jul 1983

3040-01-158-1496
Extension Shaft

011581496
74A630030-2003: RNCC: 3 | RNVC: 2

18 Jul 1983

3040-01-158-5727
Bellcrank Assembly

011585727
70400-02212-044: RNCC: 3 | RNVC: 2

25 Jul 1983

3040-01-158-5685
Shouldered Shaft

011585685
70361-06003-101: RNCC: 3 | RNVC: 2

25 Jul 1983

3040-01-158-9242
Control Cam

011589242
2712517-1: RNCC: 3 | RNVC: 2
2BA69: RNCC: 5 | RNVC: 9
2BA69: RNCC: 5 | RNVC: 9
2712517-1: RNCC: 5 | RNVC: 9
A1PF635: RNCC: D | RNVC: 9

31 Jul 1983

3040-01-159-0887
Straight Shaft

011590887
10757: RNCC: 3 | RNVC: 2
2AN566: RNCC: 5 | RNVC: 2
2AN566: RNCC: 5 | RNVC: 9
10757: RNCC: 5 | RNVC: 9

3 Aug 1983

3040-01-159-1001
Worm Shaft

011591001
60-300-0041-2: RNCC: 3 | RNVC: 2

3 Aug 1983

3040-01-159-2979
Flexible Shaft Assembly Casing

011592979
3V153: RNCC: 3 | RNVC: 2

5 Aug 1983

3040-01-161-0944
Straight Shaft

011610944
25933: RNCC: 3 | RNVC: 2
25933: RNCC: 5 | RNVC: 9

31 Aug 1983

3040-01-160-9999
Ball Joint

011609999
50141-4: RNCC: 3 | RNVC: 2
000-50141-0004: RNCC: 3 | RNVC: 2
10503391: RNCC: 5 | RNVC: 2
50141-4: RNCC: 5 | RNVC: 9

31 Aug 1983

3040-01-161-4805
Shouldered Shaft

011614805
731816: RNCC: 3 | RNVC: 2

6 Sep 1983

3040-01-161-6560
Valve Shaft

011616560
B-2255: RNCC: 3 | RNVC: 2
B-2255: RNCC: 5 | RNVC: 9

8 Sep 1983

3040-01-162-0674
Shouldered Shaft

011620674
10501493: RNCC: 3 | RNVC: 2

14 Sep 1983

3040-01-162-2684
Straight Shaft

011622684
13204253: RNCC: 3 | RNVC: 2

17 Sep 1983

3040-01-162-2843
Shaft Retaining Plate

011622843
153B0005: RNCC: 3 | RNVC: 2
A-1978 PIECE 153: RNCC: 5 | RNVC: 9
153B0005 L20A: RNCC: C | RNVC: 1
153B0005 SS304: RNCC: C | RNVC: 1
A-1978: RNCC: D | RNVC: 9

17 Sep 1983

3040-01-162-4697
Remote Control Lever

011624697
200886316: RNCC: 3 | RNVC: 2

18 Sep 1983

3040-01-162-5871
Shaft Retaining Plate

011625871
729413: RNCC: 3 | RNVC: 2

21 Sep 1983

3040-01-162-9450
Rigid Connecting Link

011629450
70400-22258-044: RNCC: 3 | RNVC: 2
70400-22258-044: RNCC: 5 | RNVC: 2
3040PL1939938: RNCC: 6 | RNVC: 9
70400-22258: RNCC: D | RNVC: 9

25 Sep 1983

3040-01-163-6344
Counterbalance Weight

011636344
AS44521-060: RNCC: 3 | RNVC: 2
2301012: RNCC: 5 | RNVC: 2
AS44521-060: RNCC: C | RNVC: 1

6 Oct 1983

3040-01-163-8555
Straight Shaft

011638555
E-3962 ITEM 15: RNCC: 3 | RNVC: 2
210118: RNCC: 3 | RNVC: 2
C-8985-3: RNCC: C | RNVC: 1
E-3962: RNCC: D | RNVC: 9

8 Oct 1983

3040-01-165-1553
Body Hub

011651553
K-8922517: RNCC: 3 | RNVC: 2
8922517: RNCC: 3 | RNVC: 2
8922517: RNCC: 5 | RNVC: 1
922517: RNCC: 5 | RNVC: 1
2AN350: RNCC: 5 | RNVC: 2
019-00001-197: RNCC: 5 | RNVC: 2
SML000252: RNCC: 5 | RNVC: 2
2AN350: RNCC: 5 | RNVC: 9
K-8922517: RNCC: 5 | RNVC: 9

26 Oct 1983

3040-01-164-5875
Rigid Connecting Link

011645875
7-211515062-3: RNCC: 3 | RNVC: 2
7-211515062-3: RNCC: 5 | RNVC: 9

19 Oct 1983

3040-01-166-2383
Straight Shaft

011662383
10504880: RNCC: 3 | RNVC: 2

9 Nov 1983

3040-01-167-1421
Rigid Connecting Link

011671421
508140-01: RNCC: 3 | RNVC: 2

22 Nov 1983

3040-01-167-0706
Bell Crank

011670706
12158-13: RNCC: 3 | RNVC: 2
12158-13: RNCC: 3 | RNVC: 9
12158-13: RNCC: 5 | RNVC: 2

21 Nov 1983

3040-01-167-8038
Rigid Connecting Link

011678038
L5871214-001: RNCC: 3 | RNVC: 2
15871214-001: RNCC: 5 | RNVC: 2

6 Dec 1983

3040-01-168-6425
Mechanical Equipment Seal Replacement Parts Kit

011686425
CB402HL005: RNCC: 3 | RNVC: 2

21 Dec 1983

3040-01-169-2242
Mechanical Drive Housing

011692242
736403: RNCC: 3 | RNVC: 2

4 Jan 1984

3040-01-169-4712
Shouldered Shaft

011694712
735410: RNCC: 3 | RNVC: 2

9 Jan 1984

3040-01-169-0601
Straight Shaft

011690601
15732: RNCC: 3 | RNVC: 2

30 Dec 1983

3040-01-170-5334
Control Cam

011705334
7-311514102: RNCC: 3 | RNVC: 2
7-311514102: RNCC: 3 | RNVC: 9

26 Jan 1984

3040-01-170-9651
Spur Gearshaft

011709651
9946M60P01: RNCC: 3 | RNVC: 2

31 Jan 1984

3040-01-171-0506
Shouldered Shaft

011710506
7-311330025: RNCC: 3 | RNVC: 2
7-311330025: RNCC: 5 | RNVC: 9
7-311330025: RNCC: 5 | RNVC: 9
7-311330025: RNCC: 5 | RNVC: 9

3 Feb 1984

3040-01-172-1543
Gear Shaft

011721543
T001224302: RNCC: 3 | RNVC: 2
T001224302: RNCC: 3 | RNVC: 9
224302: RNCC: 5 | RNVC: 9

16 Feb 1984

3040-01-172-3716
Rigid Connecting Link

011723716
123BM10213-613: RNCC: 3 | RNVC: 2
123BM10213-613: RNCC: 5 | RNVC: 2
123BM10213-613: RNCC: 5 | RNVC: 9

20 Feb 1984

3040-01-173-5429
Counterbalance Weight

011735429
1522M76P02: RNCC: 3 | RNVC: 2
9528M59P01: RNCC: C | RNVC: 1

7 Mar 1984

3040-01-173-5620
Body Hub

011735620
3500779-1: RNCC: 3 | RNVC: 2
357079: RNCC: C | RNVC: 1

7 Mar 1984

3040-01-175-3409
Manual Control Lever

011753409
5001003-B83X-158: RNCC: 3 | RNVC: 2
803-5001003-B83X-15: RNCC: 5 | RNVC: 9

30 Mar 1984

3040-01-175-4233
Rigid Connecting Link

011754233
L6312043-003: RNCC: 3 | RNVC: 2

30 Mar 1984

3040-01-174-4814
Shouldered Shaft

011744814
H330050P01: RNCC: 3 | RNVC: 2
H330050P01: RNCC: 3 | RNVC: 9
330050P01: RNCC: 5 | RNVC: 9
330050P01: RNCC: 5 | RNVC: 9
3040PL0667530: RNCC: 6 | RNVC: 9

19 Mar 1984

3040-01-177-1773
Rigid Connecting Link

011771773
9511M34P01: RNCC: 3 | RNVC: 2
9511M34P01: RNCC: 5 | RNVC: 2

20 Apr 1984

3040-01-177-2428
Spur Gearshaft

011772428
5740093: RNCC: 3 | RNVC: 2
16068: RNCC: 3 | RNVC: 2
SK31911: RNCC: 5 | RNVC: 9

20 Apr 1984

3040-01-177-2435
Linear Actuating Cylinder Piston

011772435
62E102-34: RNCC: 3 | RNVC: 2
538-07812-000 ITEM 205: RNCC: 5 | RNVC: 2
901-07791-000: RNCC: 5 | RNVC: 2
538-07812-000 ITEM 205: RNCC: 5 | RNVC: 9
538-7812 ITEM 205: RNCC: 5 | RNVC: 9
62E102: RNCC: D | RNVC: 9

20 Apr 1984

3040-01-177-8601
Remote Control Lever

011778601
13211E8987: RNCC: 3 | RNVC: 2
13211E8987: RNCC: 5 | RNVC: 2

27 Apr 1984

3040-01-178-7109
Linear Actuating Cylinder Assembly

011787109
12275469: RNCC: 3 | RNVC: 2
12275469: RNCC: 3 | RNVC: 9

9 May 1984

3040-01-178-7087
Rotating Shaft Eye Bracket

011787087
7084771: RNCC: 3 | RNVC: 2

9 May 1984

3040-01-177-4007
Bell Crank

011774007
13211E8989: RNCC: 3 | RNVC: 2
13211E8989: RNCC: 5 | RNVC: 2

24 Apr 1984

3040-01-178-8531
Helical Gearshaft

011788531
915138: RNCC: 3 | RNVC: 2

10 May 1984

3040-01-179-1347
Remote Control Lever

011791347
13211E8972: RNCC: 3 | RNVC: 2
13211E8972: RNCC: 3 | RNVC: 2

16 May 1984

3040-01-179-4956
Shaft Collar

011794956
12164-11: RNCC: 3 | RNVC: 2
12164-11: RNCC: 3 | RNVC: 9
12164-11: RNCC: 5 | RNVC: 9

19 May 1984

3040-01-180-8402
Remote Control Lever

011808402
P408302: RNCC: 3 | RNVC: 2
P408302: RNCC: 3 | RNVC: 9

4 Jun 1984

3040-01-180-8441
Control Fuel Shaft

011808441
P412675: RNCC: 3 | RNVC: 2
P412675: RNCC: 3 | RNVC: 9

4 Jun 1984

3040-01-181-1804
Remote Control Lever

011811804
P408095: RNCC: 3 | RNVC: 9
P408095: RNCC: C | RNVC: 1
81334318N: RNCC: C | RNVC: 1

7 Jun 1984

3040-01-181-9401
Counterbalance Weight

011819401
7-262110071-5: RNCC: 3 | RNVC: 2
7-262110071-5: RNCC: 3 | RNVC: 2
7-262110071-5: RNCC: 3 | RNVC: 9
7-262110071-5: RNCC: 5 | RNVC: 9

18 Jun 1984

3040-01-182-0102
Rigid Connecting Link

011820102
4451-166: RNCC: 3 | RNVC: 2

19 Jun 1984

3040-01-182-0103
Rigid Connecting Link

011820103
3860-062: RNCC: 3 | RNVC: 2

19 Jun 1984

3040-01-182-4353
Shouldered Shaft

011824353
12321243: RNCC: 3 | RNVC: 2

23 Jun 1984

3040-01-182-7611
Shouldered Shaft

011827611
387-3792: RNCC: 3 | RNVC: 2
387-3792: RNCC: 5 | RNVC: 2
387-3792: RNCC: 5 | RNVC: 9
387-3792: RNCC: 5 | RNVC: 9
387-3792: RNCC: 5 | RNVC: 9
387-3792: RNCC: 5 | RNVC: 9
387-3792: RNCC: C | RNVC: 1

27 Jun 1984

3040-01-182-9237
Shouldered Shaft

011829237
57405-6: RNCC: 3 | RNVC: 2
5041-372: RNCC: 5 | RNVC: 2
3040PL0947538: RNCC: 6 | RNVC: 9
57405: RNCC: D | RNVC: 9

30 Jun 1984

3040-01-183-5104
Rigid Connecting Link

011835104
SR10784A-7003: RNCC: 3 | RNVC: 2
7514-7003: RNCC: 3 | RNVC: 2
7014-39: RNCC: 5 | RNVC: 9
LE162-0002-7003: RNCC: 7 | RNVC: 2

7 Jul 1984

3040-01-183-8356
Nonrotating Shaft Eye Bracket

011838356
13214E2773: RNCC: 3 | RNVC: 2

11 Jul 1984

3040-01-184-1870
Pushrod Assembly

011841870
123L10010-601: RNCC: 3 | RNVC: 2
123L10010-601: RNCC: 5 | RNVC: 2
123L10010-601: RNCC: 5 | RNVC: 9

17 Jul 1984

3040-01-184-2272
Bell Crank

011842272
5T7451: RNCC: 3 | RNVC: 2

17 Jul 1984

3040-01-184-4416
Spider Assembly

011844416
412678-07: RNCC: 3 | RNVC: 2
412678-07: RNCC: 3 | RNVC: 9
412678-07: RNCC: 5 | RNVC: 9

18 Jul 1984

3040-01-184-0558
Rigid Connecting Link

011840558
75A603530-1001: RNCC: 3 | RNVC: 2
75A603530-1001: RNCC: 5 | RNVC: 9
75A603530: RNCC: 5 | RNVC: 9
75A603530: RNCC: D | RNVC: 9

13 Jul 1984

3040-01-184-4668
Rotating Shaft Eye Bracket

011844668
081650034T: RNCC: 3 | RNVC: 2
81650-34-T: RNCC: 3 | RNVC: 9
81650-34-T: RNCC: 5 | RNVC: 9
87240 PIECE 4,5: RNCC: 5 | RNVC: 9
87240 PIECE 4,5: RNCC: C | RNVC: 1
87240: RNCC: D | RNVC: 9

18 Jul 1984

3040-01-184-6880
Rigid Connecting Link

011846880
7514-6049: RNCC: 3 | RNVC: 2
SR10784A-6049: RNCC: 5 | RNVC: 2
LE162--0002-6049: RNCC: 7 | RNVC: 2

5 Feb 2004

3040-01-184-6851
Shouldered Shaft

011846851
014417-1: RNCC: 3 | RNVC: 9
014417-1: RNCC: 5 | RNVC: 2

21 Jul 1984

3040-01-185-0493
Rigid Connecting Link

011850493
12329034-2: RNCC: 3 | RNVC: 2
12297201-2: RNCC: E | RNVC: 8

25 Jul 1984

3040-01-184-9479
Shouldered Shaft

011849479
75A607240-2001: RNCC: 3 | RNVC: 9
75A607240-2001: RNCC: 5 | RNVC: 2
75A607240-2001: RNCC: C | RNVC: 1

24 Jul 1984

3040-01-185-2533
Worm Shaft

011852533
K1684: RNCC: 3 | RNVC: 2
K1684: RNCC: 5 | RNVC: 9

26 Jul 1984

3040-01-185-3886
Left Hand Terminal Shaft

011853886
3163-035: RNCC: 3 | RNVC: 2
9987-824 ITEM 191: RNCC: 5 | RNVC: 2
9987-824: RNCC: D | RNVC: 9

27 Jul 1984

3040-01-185-6254
Manual Control Lever

011856254
322949: RNCC: 3 | RNVC: 2
322949: RNCC: 5 | RNVC: 2
322949: RNCC: 5 | RNVC: 9
322949: RNCC: 5 | RNVC: 9
322949: RNCC: 5 | RNVC: 9
322949: RNCC: 5 | RNVC: 9

1 Aug 1984

3040-01-129-8487
Rigid Connecting Link

011298487
65410-00015-044: RNCC: 3 | RNVC: 2

12 Apr 1982

3040-01-129-8490
Rigid Connecting Link

011298490
65316-12036-041: RNCC: 3 | RNVC: 2

12 Apr 1982

3040-01-130-2810
Bell Crank Support

011302810
65415-11401-044: RNCC: 3 | RNVC: 2

19 Apr 1982

3040-01-130-3176
Rigid Connecting Link

011303176
65410-00015-042: RNCC: 3 | RNVC: 2

19 Apr 1982

3040-01-130-6397
Rigid Connecting Link

011306397
4706-1: RNCC: 3 | RNVC: 2
74J668000-103: RNCC: 3 | RNVC: 2
SR11574A103: RNCC: 5 | RNVC: 9
SR11574A103: RNCC: 5 | RNVC: 9

28 Apr 1982

3040-01-130-8235
Shouldered Shaft

011308235
952452C1: RNCC: 3 | RNVC: 2
4212-552002: RNCC: C | RNVC: 1

29 Apr 1982

3040-01-130-3185
Rigid Connecting Link

011303185
74A410539-1003: RNCC: 3 | RNVC: 2
74A410539-1003: RNCC: 5 | RNVC: 2
74A410539-1003: RNCC: 5 | RNVC: 2
74A410539-1003: RNCC: 5 | RNVC: 2
74A410539-1003: RNCC: 5 | RNVC: 2
74A410539-1003: RNCC: 5 | RNVC: 2
74A410539-1003: RNCC: 5 | RNVC: 9
74A410539-1003: RNCC: 5 | RNVC: 9
74A410539-1003: RNCC: 5 | RNVC: 9
74A410539-1003: RNCC: 5 | RNVC: 9

19 Apr 1982

3040-01-129-9041
Manual Control Lever

011299041
10915246: RNCC: 3 | RNVC: 2

14 Apr 1982

3040-01-131-0070
Rigid Connecting Link

011310070
74A425036-2001: RNCC: 3 | RNVC: 2
74A425036-2001: RNCC: 5 | RNVC: 9
10153951: RNCC: 6 | RNVC: 9
74A425036: RNCC: D | RNVC: 9

1 May 1982

3040-01-131-4474
Straight Shaft

011314474
4073T43P01: RNCC: 3 | RNVC: 2

11 May 1982

3040-01-131-5090
Piston Ring

011315090
960145-92: RNCC: 3 | RNVC: 2
960145-92: RNCC: 5 | RNVC: 2

12 May 1982

3040-01-132-0993
Mechanical Drive Housing

011320993
12292009: RNCC: 3 | RNVC: 2
10392404: RNCC: 6 | RNVC: 9

22 May 1982

3040-01-132-0629
Shaft Collar

011320629
2763269-101: RNCC: 3 | RNVC: 2
2763269-101: RNCC: 5 | RNVC: 2
10106886: RNCC: 6 | RNVC: 9
2763269: RNCC: D | RNVC: 9

22 May 1982

3040-01-134-2903
Shouldered Shaft

011342903
5076A107-1: RNCC: 3 | RNVC: 2
5076A107: RNCC: D | RNVC: 9

2 Jul 1982

3040-01-134-6545
Linear Actuating Cylinder Assembly

011346545
12270499: RNCC: 3 | RNVC: 2

7 Jul 1982

3040-01-138-8140
Linear Actuating Cylinder Piston Rod

011388140
2188032-1: RNCC: 3 | RNVC: 2
2188032-1: RNCC: 5 | RNVC: 1
2188032-1: RNCC: 5 | RNVC: 9
10106901: RNCC: 6 | RNVC: 9

21 Sep 1982

3040-01-138-8167
Rigid Connecting Link

011388167
65414-03105-045: RNCC: 3 | RNVC: 2

21 Sep 1982

3040-01-140-3191
Straight Shaft

011403191
172B4176P1: RNCC: 3 | RNVC: 2
172B4176P1: RNCC: 5 | RNVC: 2
10106910: RNCC: 6 | RNVC: 9
172B4176P1: RNCC: C | RNVC: 1

11 Oct 1982

3040-01-140-3437
Accel Cam Follower Shaft

011403437
2653745: RNCC: 3 | RNVC: 2
2653745: RNCC: 5 | RNVC: 2
10341448: RNCC: 6 | RNVC: 9

11 Oct 1982

3040-01-140-3831
Shouldered Shaft

011403831
2663771: RNCC: 3 | RNVC: 2
2663771: RNCC: 5 | RNVC: 2
10106916: RNCC: 6 | RNVC: 9

11 Oct 1982

3040-01-141-2404
Bell Crank

011412404
65861-04167-041: RNCC: 3 | RNVC: 2
65861-04167-041: RNCC: 5 | RNVC: 9

25 Oct 1982

3040-01-140-8018
Shaft

011408018
60-500-0235-1: RNCC: 3 | RNVC: 2
01-435-0157-5 REV A PIECE 238: RNCC: 5 | RNVC: 2
01-435-0157-5 REV A PIECE 238: RNCC: 5 | RNVC: 9
60-500-0235-1: RNCC: 5 | RNVC: 9

19 Oct 1982

3040-01-142-6220
Remote Control Lever

011426220
2617115: RNCC: 3 | RNVC: 2

18 Nov 1982

3040-01-143-3369
Counterbalance Weight

011433369
4069T98P01: RNCC: 3 | RNVC: 2

2 Dec 1982

3040-01-143-3371
Counterbalance Weight

011433371
4069T98P03: RNCC: 3 | RNVC: 2
4069T98P03: RNCC: 5 | RNVC: 2
4069T98P03: RNCC: 5 | RNVC: 2

2 Dec 1982

3040-01-144-3333
Shouldered Shaft

011443333
AC9407-1: RNCC: 3 | RNVC: 2
AC9407-1: RNCC: 3 | RNVC: 9

18 Dec 1982

3040-01-145-0531
Shaft Retaining Plate

011450531
55019CX: RNCC: 3 | RNVC: 2
55019CX: RNCC: 5 | RNVC: 9

4 Jan 1983

3040-01-145-1779
Rigid Connecting Link

011451779
12316992: RNCC: 3 | RNVC: 2

7 Jan 1983

3040-01-145-5582
Shouldered Shaft

011455582
87539-3704 ITEM 8: RNCC: 3 | RNVC: 2
600-4789163 ITEM 8: RNCC: 5 | RNVC: 2
600-4789341 ITEM 8: RNCC: 5 | RNVC: 2
87539-3704 ITEM 8: RNCC: 5 | RNVC: 9
87539-3704: RNCC: D | RNVC: 9
600-4789163: RNCC: D | RNVC: 9
600-4789341: RNCC: D | RNVC: 9

14 Jan 1983

3040-01-146-3382
Rigid Connecting Link

011463382
12294565: RNCC: 3 | RNVC: 2

29 Jan 1983

3040-01-147-5785
Control Cam

011475785
SM-B-500795: RNCC: 3 | RNVC: 2
666093-104: RNCC: 5 | RNVC: 2

18 Feb 1983

3040-01-148-1643
Rigid Connecting Link

011481643
12316981: RNCC: 3 | RNVC: 2

1 Mar 1983

3040-01-148-2849
Shouldered Shaft

011482849
4674128-0016: RNCC: 3 | RNVC: 2
515-4674128 ITEM 16: RNCC: 3 | RNVC: 2
87552-0620 ITEM 16: RNCC: 5 | RNVC: 2
36-37-7864: RNCC: 5 | RNVC: 9
87552-0620: RNCC: D | RNVC: 9
515-4674128: RNCC: D | RNVC: 9

3 Mar 1983

3040-01-148-1644
Rigid Connecting Link

011481644
12317039: RNCC: 3 | RNVC: 2

1 Mar 1983

3040-01-149-5043
Hub Clamp

011495043
6N8002: RNCC: 3 | RNVC: 2
6N8003: RNCC: 3 | RNVC: 2

22 Mar 1983

3040-01-149-6339
Spline Adapter

011496339
81-31300-01: RNCC: 3 | RNVC: 2
458-50085-1: RNCC: 7 | RNVC: 2

23 Mar 1983

3040-01-150-6946
Torque Control Shaft

011506946
3240998: RNCC: 3 | RNVC: 2
3240998: RNCC: 3 | RNVC: 9

7 Apr 1983

3040-01-151-0706
Shouldered Shaft

011510706
42312-155: RNCC: 3 | RNVC: 2
42312E155: RNCC: 5 | RNVC: 2
10106942: RNCC: 6 | RNVC: 9

12 Apr 1983

3040-01-151-2608
Straight Shaft

011512608
1342600: RNCC: 3 | RNVC: 2
1342600: RNCC: 5 | RNVC: 9

15 Apr 1983

3040-01-151-0884
Rigid Connecting Link

011510884
2663523: RNCC: 3 | RNVC: 2
10106943: RNCC: 6 | RNVC: 9

12 Apr 1983

3040-01-151-7991
Straight Shaft

011517991
RE-B102206: RNCC: 3 | RNVC: 2
RE-B102206: RNCC: 5 | RNVC: 1
B102206: RNCC: 5 | RNVC: 1
ASC1540518: RNCC: 5 | RNVC: 9

22 Apr 1983

3040-01-152-0946
Rigid Connecting Link

011520946
65410-03511-041: RNCC: 3 | RNVC: 2
65410-03511-041: RNCC: 5 | RNVC: 9

27 Apr 1983

3040-01-152-9332
Rigid Connecting Link

011529332
65410-00014-065: RNCC: 3 | RNVC: 2

10 May 1983

3040-01-153-1500
Valve Shaft

011531500
20825-1030: RNCC: 3 | RNVC: 2
20825-001 FIND 8: RNCC: 5 | RNVC: 9
20825-001: RNCC: D | RNVC: 9

13 May 1983

3040-01-154-9722
Linear Actuating Cylinder Assembly Parts Kit

011549722
11277: RNCC: 3 | RNVC: 2
2BC407: RNCC: 5 | RNVC: 2
2BC407: RNCC: 5 | RNVC: 9

3 Jun 1983

3040-01-156-0726
Extension Shaft

011560726
74A630030-2005: RNCC: 3 | RNVC: 2

19 Jun 1983

3040-01-157-8713
Counterbalance Weight

011578713
4075T14P02: RNCC: 3 | RNVC: 2
10158668: RNCC: 6 | RNVC: 9

13 Jul 1983

3040-01-158-6092
Rigid Connecting Link

011586092
70400-02232-045: RNCC: 3 | RNVC: 2
3040PL1959376: RNCC: 6 | RNVC: 9

25 Jul 1983

3040-01-159-2963
Linear Actuating Cylinder

011592963
7G5081: RNCC: 3 | RNVC: 2

5 Aug 1983

3040-01-161-8186
Extension Shaft

011618186
74A733565-2011: RNCC: 3 | RNVC: 2
3929AS812-3: RNCC: 5 | RNVC: 2
74A733565-2011: RNCC: 5 | RNVC: 9
74A733565-2011: RNCC: 5 | RNVC: 9
10117852: RNCC: 6 | RNVC: 9
74A733565-2011: RNCC: C | RNVC: 1

11 Sep 1983

3040-01-162-0255
Pawl

011620255
7040173: RNCC: 3 | RNVC: 2
7040173: RNCC: 5 | RNVC: 9

13 Sep 1983

3040-01-162-9270
Shouldered Shaft

011629270
200886716: RNCC: 3 | RNVC: 2

25 Sep 1983

3040-01-163-4535
Rigid Connecting Link

011634535
236746-1: RNCC: 3 | RNVC: 2
236746-1: RNCC: 5 | RNVC: 1

4 Oct 1983

3040-01-163-7313
Manual Control Lever

011637313
1352020W: RNCC: 3 | RNVC: 2
1352020W: RNCC: 5 | RNVC: 9

6 Oct 1983

3040-01-164-5883
Remote Control Lever

011645883
10502287-PT: RNCC: 3 | RNVC: 2
10502287: RNCC: 5 | RNVC: 9

19 Oct 1983

3040-01-164-7818
Shouldered Shaft

011647818
145531: RNCC: 3 | RNVC: 2

21 Oct 1983

3040-01-164-8438
Shouldered Shaft

011648438
406-040-416-103: RNCC: 3 | RNVC: 2
406-040-416-101: RNCC: 5 | RNVC: 9

21 Oct 1983

3040-01-166-1251
Brake Disc

011661251
MA580A: RNCC: 3 | RNVC: 2
MA-580: RNCC: 3 | RNVC: 9

8 Nov 1983

3040-01-166-1357
Rigid Connecting Link

011661357
5433000: RNCC: 3 | RNVC: 2

8 Nov 1983

3040-01-166-6779
Shouldered Shaft

011666779
4648150: RNCC: 3 | RNVC: 2
4648150: RNCC: 5 | RNVC: 2
4648150: RNCC: 5 | RNVC: 2
4648150: RNCC: 5 | RNVC: 2
4648150: RNCC: 5 | RNVC: 2

16 Nov 1983

3040-01-166-9166
Counterbalance Weight

011669166
7-211412024-11: RNCC: 3 | RNVC: 2
7-211412024-11: RNCC: 5 | RNVC: 9

19 Nov 1983

3040-01-167-1423
Pawl

011671423
508197-01: RNCC: 3 | RNVC: 9
508197-01: RNCC: 5 | RNVC: 2
508197-01: RNCC: 5 | RNVC: 2
508197: RNCC: D | RNVC: 9

22 Nov 1983

3040-01-168-0639
Spur Gearshaft

011680639
3606382-3: RNCC: 3 | RNVC: 2
3606382-3: RNCC: 3 | RNVC: 9

10 Dec 1983

3040-01-170-2408
Mechanical Drive Housing

011702408
3-060-045-999: RNCC: 3 | RNVC: 2

22 Jan 1984

3040-01-167-8309
Spur Gearshaft

011678309
12524079: RNCC: 3 | RNVC: 2
465-4079: RNCC: 5 | RNVC: 2
465-4079: RNCC: 5 | RNVC: 9

7 Dec 1983

3040-01-171-0915
Counterbalance Weight

011710915
9528M52P01: RNCC: 3 | RNVC: 2
9528M52P01: RNCC: 5 | RNVC: 2
9528M52P01: RNCC: 5 | RNVC: 2
9528M52P01: RNCC: 5 | RNVC: 2
9528M52P01: RNCC: 5 | RNVC: 2
9528M52P01: RNCC: 5 | RNVC: 9

3 Feb 1984

3040-01-171-2800
Bell Crank

011712800
65-40137-501: RNCC: 3 | RNVC: 2

4 Feb 1984

3040-01-172-5447
Brake Disc

011725447
8-003-704-01: RNCC: 3 | RNVC: 2

22 Feb 1984

3040-01-173-7421
Counterbalance Weight

011737421
9952M59P02: RNCC: 3 | RNVC: 2

8 Mar 1984

3040-01-173-5230
Shouldered Shaft

011735230
H330030P01: RNCC: 3 | RNVC: 9
330030P01: RNCC: 5 | RNVC: 9
330030P01: RNCC: 5 | RNVC: 9
3040PL0667084: RNCC: 6 | RNVC: 9
3040PL1601305: RNCC: 6 | RNVC: 9
H330030P01: RNCC: C | RNVC: 1

7 Mar 1984

3040-01-174-6216
Rigid Connecting Link

011746216
B889100-135: RNCC: 3 | RNVC: 2
4900-135: RNCC: 3 | RNVC: 2
75B618002-135: RNCC: 7 | RNVC: 2
4900: RNCC: D | RNVC: 9

21 Mar 1984

3040-01-174-4783
Shouldered Shaft

011744783
330036P01: RNCC: 3 | RNVC: 2
01-174-4783: RNCC: 5 | RNVC: 2
330036P01: RNCC: 5 | RNVC: 9
3040PL0667409: RNCC: 6 | RNVC: 9
3040PL1685425: RNCC: 6 | RNVC: 9

19 Mar 1984

3040-01-175-0585
Straight Shaft

011750585
LG0094-3300: RNCC: 3 | RNVC: 2
SW18411P-3: RNCC: 5 | RNVC: 2
LG0094-33: RNCC: 5 | RNVC: 9
LG0522: RNCC: 5 | RNVC: 9
LG0094-3175: RNCC: 5 | RNVC: 9

26 Mar 1984

3040-01-175-5261
Linear Actuating Cylinder Head

011755261
7J3351: RNCC: 3 | RNVC: 2

1 Apr 1984

3040-01-177-2427
Spur Gearshaft

011772427
16071: RNCC: 3 | RNVC: 2
5740092: RNCC: 3 | RNVC: 2
SK31861: RNCC: 5 | RNVC: 9

20 Apr 1984

3040-01-177-4468
Rigid Connecting Link

011774468
12300938: RNCC: 3 | RNVC: 2

25 Apr 1984

3040-01-178-5518
Linear Actuating Cylinder Piston

011785518
11672499: RNCC: 3 | RNVC: 2

7 May 1984

3040-01-179-5427
Piston Ring Set

011795427
RN26ER: RNCC: 3 | RNVC: 2
N7297: RNCC: 5 | RNVC: 2

19 May 1984

3040-01-179-7635
Bell Crank

011797635
10504142: RNCC: 3 | RNVC: 2

21 May 1984

3040-01-180-0647
Straight Shaft

011800647
P411118: RNCC: 3 | RNVC: 2
P411118: RNCC: 3 | RNVC: 9

24 May 1984

3040-01-179-9769
Shouldered Shaft

011799769
P12611597: RNCC: 3 | RNVC: 2
P12611597: RNCC: 3 | RNVC: 9

23 May 1984

3040-01-180-0730
Shaft Retaining Plate

011800730
1-5265: RNCC: 3 | RNVC: 2

24 May 1984

3040-01-180-0806
Manual Control Lever

011800806
P12602962N: RNCC: 3 | RNVC: 2
P12602962: RNCC: 3 | RNVC: 9
P12602962: RNCC: 5 | RNVC: 9
P12602962N: RNCC: C | RNVC: 1

24 May 1984

3040-01-180-5858
Remote Control Lever

011805858
704723-2: RNCC: 3 | RNVC: 2
704723-2: RNCC: 3 | RNVC: 9

30 May 1984

3040-01-181-0140
Friction Lining

011810140
2A1-1193-4: RNCC: 3 | RNVC: 2
2A1-1193-3: RNCC: C | RNVC: 1

6 Jun 1984

3040-01-181-0152
Linear Actuating Cylinder Assembly Parts Kit

011810152
051-KR015-63: RNCC: 3 | RNVC: 9

6 Jun 1984

3040-01-181-6336
Low Reaction Plate

011816336
13215E6658: RNCC: 3 | RNVC: 2

13 Jun 1984

3040-01-182-0970
Flexible Casing Coupling Nut

011820970
11250-C-18B: RNCC: 3 | RNVC: 2
C162D164AX1B: RNCC: 3 | RNVC: 9
C162D164AX1B: RNCC: 5 | RNVC: 9
C-162D164AX1: RNCC: 5 | RNVC: 9
PL-11256-F-18 ITEM 164A: RNCC: 5 | RNVC: 9
PL-11256-F-18 ITEM 164A: RNCC: C | RNVC: 1

19 Jun 1984

3040-01-182-0290
Splined Shaft

011820290
125C107: RNCC: 3 | RNVC: 2

19 Jun 1984

3040-01-183-4759
Linear Actuating Cylinder Piston

011834759
N20489: RNCC: 3 | RNVC: 2
20489: RNCC: 3 | RNVC: 2
20489: RNCC: 5 | RNVC: 2
13814N PIECE 5: RNCC: 5 | RNVC: 9
13814N: RNCC: D | RNVC: 9

6 Jul 1984

3040-01-184-8752
Linear Actuating Cylinder Piston Rod

011848752
2195042-1: RNCC: 3 | RNVC: 2
2195042-1: RNCC: 5 | RNVC: 1
2195042-1: RNCC: 5 | RNVC: 9

24 Jul 1984

3040-01-185-0709
Shouldered Shaft

011850709
217114: RNCC: 3 | RNVC: 2

25 Jul 1984

3040-01-185-3198
Rigid Connecting Link

011853198
206-001-020-101: RNCC: 3 | RNVC: 2

27 Jul 1984

Load More Results