What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 125 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 125 of 300

3040-01-194-3359
Linear Actuating Cylinder Piston Rod

011943359
6-768-001683: RNCC: 3 | RNVC: 2
2CD714: RNCC: 5 | RNVC: 2
2CD714: RNCC: 5 | RNVC: 9

13 Nov 1984

3040-01-194-6763
Manual Control Lever

011946763
600486: RNCC: 3 | RNVC: 2

16 Nov 1984

3040-01-195-4313
Spur Gearshaft

011954313
870624080: RNCC: 3 | RNVC: 2
3040PL0661331: RNCC: 6 | RNVC: 9

29 Nov 1984

3040-01-196-4535
Nonrotating Shaft Eye Bracket

011964535
074-01-251-01: RNCC: 3 | RNVC: 2

11 Dec 1984

3040-01-197-1747
Shouldered Shaft

011971747
13216E6142-5: RNCC: 3 | RNVC: 9
13216E6142-5: RNCC: 5 | RNVC: 2

19 Dec 1984

3040-01-198-0955
Body Hub

011980955
410037-1: RNCC: 3 | RNVC: 2
300037-1: RNCC: 5 | RNVC: 9
300037: RNCC: 5 | RNVC: 9

4 Jan 1985

3040-01-198-0713
Mechanical Drive Housing

011980713
23045026: RNCC: 3 | RNVC: 2

4 Jan 1985

3040-01-198-0961
Rigid Connecting Link

011980961
PDG7826: RNCC: 3 | RNVC: 9

4 Jan 1985

3040-01-198-9655
Remote Control Lever

011989655
XA-FW-137-2: RNCC: 3 | RNVC: 2
2CF115: RNCC: 5 | RNVC: 2
FW-137: RNCC: 5 | RNVC: 2
XA-FW-137-2: RNCC: 5 | RNVC: 2
XA-FW-137-2: RNCC: 5 | RNVC: 2
2CF115: RNCC: 5 | RNVC: 9
17TN626: RNCC: 5 | RNVC: 9
XA-71-0A: RNCC: D | RNVC: 9

16 Jan 1985

3040-01-199-6586
Straight Shaft

011996586
6-810-001899: RNCC: 3 | RNVC: 2
2CD722: RNCC: 5 | RNVC: 2
2CD722: RNCC: 5 | RNVC: 9

24 Jan 1985

3040-01-199-6718
Linear Actuating Cylinder Piston

011996718
444-00: RNCC: 3 | RNVC: 2
444: RNCC: 5 | RNVC: 9
40273 PIECE 34: RNCC: 5 | RNVC: 9
40273: RNCC: D | RNVC: 9

24 Jan 1985

3040-01-200-4321
Linear Actuating Cylinder Assembly Parts Kit

012004321
2CD402: RNCC: 3 | RNVC: 2
9-752-100506: RNCC: 5 | RNVC: 9
2CD402: RNCC: 5 | RNVC: 9

4 Feb 1985

3040-01-200-7857
Extension Shaft

012007857
384-1388-00: RNCC: 3 | RNVC: 2

9 Feb 1985

3040-01-202-6493
Counterbalance Weight

012026493
8050049-005: RNCC: 3 | RNVC: 9
X8050049-005: RNCC: 5 | RNVC: 9

5 Mar 1985

3040-01-203-4325
Rigid Connecting Link

012034325
75A667126-1003: RNCC: 3 | RNVC: 9
75A667126-1003: RNCC: 5 | RNVC: 2
75A667126-1003: RNCC: 5 | RNVC: 9
75A667126-1003: RNCC: 5 | RNVC: 9
75A667126: RNCC: 5 | RNVC: 9
75A667126: RNCC: D | RNVC: 9

14 Mar 1985

3040-01-204-2710
Shouldered Shaft

012042710
L6312207-005: RNCC: 3 | RNVC: 2

24 Mar 1985

3040-01-204-4536
Rigid Connecting Link

012044536
G108818-1: RNCC: 3 | RNVC: 2
G108818-1: RNCC: 5 | RNVC: 2
G108818-1: RNCC: 5 | RNVC: 9
G108818: RNCC: D | RNVC: 9

27 Mar 1985

3040-01-204-6248
Flapper Door Link

012046248
L6310168-011: RNCC: 3 | RNVC: 2
L6310168-001: RNCC: 5 | RNVC: 9

28 Mar 1985

3040-01-204-7663
Rigid Connecting Link

012047663
L3400198-001: RNCC: 3 | RNVC: 2

29 Mar 1985

3040-01-205-6305
Rigid Connecting Link

012056305
L6410016-003: RNCC: 3 | RNVC: 2

10 Apr 1985

3040-01-205-8770
Manual Control Lever

012058770
115351-30: RNCC: 3 | RNVC: 9
5-4772: RNCC: 5 | RNVC: 2
115351-30: RNCC: 5 | RNVC: 9

12 Apr 1985

3040-01-207-1030
Linear Actuating Cylinder Piston

012071030
284-02: RNCC: 3 | RNVC: 2

28 Apr 1985

3040-01-207-3582
Shouldered Shaft

012073582
27072: RNCC: 3 | RNVC: 2
27072: RNCC: 3 | RNVC: 9
27072: RNCC: 5 | RNVC: 9

1 May 1985

3040-01-207-5677
Shouldered Shaft

012075677
9384654: RNCC: 3 | RNVC: 2

3 May 1985

3040-01-207-6570
Mechanical Drive Housing

012076570
27028: RNCC: 3 | RNVC: 2
27028: RNCC: 3 | RNVC: 9

4 May 1985

3040-01-207-9280
Linear Actuating Cylinder Piston Rod

012079280
6-768-001673: RNCC: 3 | RNVC: 2
2CT198: RNCC: 5 | RNVC: 2
2CT198: RNCC: 5 | RNVC: 9

7 May 1985

3040-01-207-9790
Rigid Connecting Link

012079790
1300750 U: RNCC: 3 | RNVC: 2
1300750 U: RNCC: 5 | RNVC: 9

8 May 1985

3040-01-209-3879
Spline Adapter

012093879
1593588-7: RNCC: 3 | RNVC: 2
81-313100-02: RNCC: 5 | RNVC: 2
1593588-7: RNCC: 5 | RNVC: 9

29 May 1985

3040-01-209-6719
Bell Crank

012096719
L6312204-005: RNCC: 3 | RNVC: 2

4 Jun 1985

3040-01-209-8679
Control Cam

012098679
9376397-1: RNCC: 3 | RNVC: 2
9376397: RNCC: D | RNVC: 9

4 Jun 1985

3040-01-209-8682
Mechanical Drive Housing

012098682
9376477: RNCC: 3 | RNVC: 2

4 Jun 1985

3040-01-210-2823
Rigid Connecting Link

012102823
045-07500-000: RNCC: 3 | RNVC: 2
045-07500-000: RNCC: 3 | RNVC: 9
45-7500: RNCC: 5 | RNVC: 9
3040PL0794779: RNCC: 6 | RNVC: 9
45-7501: RNCC: C | RNVC: 1

11 Jun 1985

3040-01-210-5804
Straight Shaft

012105804
306112: RNCC: 3 | RNVC: 2
305463 ITEM 1: RNCC: 5 | RNVC: 1
305463 ITEM 1: RNCC: 5 | RNVC: 9
306112: RNCC: 5 | RNVC: 9

14 Jun 1985

3040-01-211-1048
Manual Control Lever

012111048
W635700: RNCC: 3 | RNVC: 2
W5656800: RNCC: 5 | RNVC: 9

21 Jun 1985

3040-01-211-2420
Counterbalance Weight

012112420
3046T30P04: RNCC: 3 | RNVC: 2

22 Jun 1985

3040-01-214-3848
Linear Actuating Cylinder Assembly Parts Kit

012143848
642926: RNCC: 3 | RNVC: 2
C642926: RNCC: 5 | RNVC: 2
1125555C1: RNCC: 5 | RNVC: 9
642926: RNCC: 5 | RNVC: 9

9 Aug 1985

3040-01-215-8188
Shaft Assembly Leve

012158188
64653KYA: RNCC: 3 | RNVC: 2
64653: RNCC: 5 | RNVC: 2

1 Sep 1985

3040-01-215-8561
Worm Shaft

012158561
387-3465-3: RNCC: 3 | RNVC: 9
387-3465-3: RNCC: 5 | RNVC: 9
387-3465-3: RNCC: C | RNVC: 1

1 Sep 1985

3040-01-216-2716
Shouldered Shaft

012162716
12309696: RNCC: 3 | RNVC: 2

7 Sep 1985

3040-01-216-4893
Rigid Connecting Link

012164893
4057626: RNCC: 3 | RNVC: 2
4057626: RNCC: 5 | RNVC: 2
4057626: RNCC: 5 | RNVC: 9

11 Sep 1985

3040-01-216-6985
Rigid Connecting Link

012166985
BACR24N4BL327: RNCC: 3 | RNVC: 2
BACR24E4CL-327E: RNCC: 5 | RNVC: 9
BACR24N4BL327BL: RNCC: 5 | RNVC: 9
BACR24E4CL-327E: RNCC: 5 | RNVC: 9
BACR24E: RNCC: D | RNVC: 9
BACR24N: RNCC: D | RNVC: 9

14 Sep 1985

3040-01-217-5773
Rigid Connecting Link

012175773
045-07502-000: RNCC: 3 | RNVC: 2
045-07502-000: RNCC: 3 | RNVC: 9
45-7502: RNCC: 5 | RNVC: 9
3040PL0794770: RNCC: 6 | RNVC: 9

28 Sep 1985

3040-01-216-9419
Counterbalance Weight

012169419
8915: RNCC: 3 | RNVC: 2

19 Sep 1985

3040-01-219-1541
Counterbalance Weight

012191541
8019129-013: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-1550
Counterbalance Weight

012191550
8019129-022: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-1555
Counterbalance Weight

012191555
8019129-027: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-1557
Counterbalance Weight

012191557
8019129-029: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-6720
Shaft Retaining Plate

012196720
1435950: RNCC: 3 | RNVC: 2
1435950: RNCC: 5 | RNVC: 9

31 Oct 1985

3040-01-221-2027
Linear Actuating Cylinder Assembly Parts Kit

012212027
PK3202A005: RNCC: 3 | RNVC: 2

26 Nov 1985

3040-01-221-3718
Linear Actuating Cylinder Assembly

012213718
L117120: RNCC: 3 | RNVC: 2
V100AC: RNCC: C | RNVC: 1
XA59502: RNCC: C | RNVC: 1
L109583: RNCC: C | RNVC: 1
L12627: RNCC: C | RNVC: 1

28 Nov 1985

3040-01-221-9318
Counterbalance Weight

012219318
8019131-029: RNCC: 3 | RNVC: 9

5 Dec 1985

3040-01-221-9326
Counterbalance Weight

012219326
8019131-038: RNCC: 3 | RNVC: 9

5 Dec 1985

3040-01-222-2412
Flinger Shaft

012222412
RSN206S: RNCC: 3 | RNVC: 2
RSN206S: RNCC: 5 | RNVC: 2

9 Dec 1985

3040-01-222-3083
Counterbalance Weight

012223083
8019131-021: RNCC: 3 | RNVC: 9

10 Dec 1985

3040-01-222-3835
Linear Actuating Cylinder Assembly

012223835
AG154125C0: RNCC: 3 | RNVC: 2

11 Dec 1985

3040-01-222-9435
Straight Shaft

012229435
2664729: RNCC: 3 | RNVC: 2

20 Dec 1985

3040-01-223-0914
Straight Shaft

012230914
64A98B158-1: RNCC: 3 | RNVC: 2
64A98B158: RNCC: D | RNVC: 9

21 Dec 1985

3040-01-223-3839
Spur Gearshaft

012233839
2671915: RNCC: 3 | RNVC: 2

28 Dec 1985

3040-01-224-0876
Straight Shaft

012240876
40970A: RNCC: 3 | RNVC: 2

12 Jan 1986

3040-01-224-3934
Rigid Connecting Link

012243934
4F23661-125B: RNCC: 3 | RNVC: 2

15 Jan 1986

3040-01-224-5497
Manual Control Lever

012245497
1447190W: RNCC: 3 | RNVC: 2
1447190W: RNCC: 5 | RNVC: 9

17 Jan 1986

3040-01-225-6563
Door Shaft

012256563
5-4-4736: RNCC: 3 | RNVC: 2

6 Feb 1986

3040-01-225-8090
Straight Shaft

012258090
10073: RNCC: 3 | RNVC: 2
10073: RNCC: 5 | RNVC: 9

8 Feb 1986

3040-01-227-1983
Shouldered Shaft

012271983
117D2115-2: RNCC: 3 | RNVC: 2

1 Mar 1986

3040-01-228-2240
Rotor Assembly

012282240
0-080-410-01: RNCC: 3 | RNVC: 2

16 Mar 1986

3040-01-228-3595
Remote Control Lever

012283595
176037-100: RNCC: 3 | RNVC: 2
176037-100: RNCC: 3 | RNVC: 9
176037-100: RNCC: 5 | RNVC: 9

18 Mar 1986

3040-01-229-6301
Linear Actuating Cylinder Assembly

012296301
AG146146C0: RNCC: 3 | RNVC: 2
AG146146C0: RNCC: 5 | RNVC: 9

3 Apr 1986

3040-01-228-5457
Shaft Retaining Plate

012285457
5191373-2: RNCC: 3 | RNVC: 2
5191373-2: RNCC: C | RNVC: 1

18 Mar 1986

3040-01-230-3063
Straight Shaft

012303063
60244-40815-2: RNCC: 3 | RNVC: 2

12 Apr 1986

3040-01-233-3087
Bell Crank Support

012333087
L6410350-009: RNCC: 3 | RNVC: 2
L6410350-009: RNCC: 5 | RNVC: 9

29 May 1986

3040-01-234-4008
Nonrotating Shaft Eye Bracket

012344008
42420-188: RNCC: 3 | RNVC: 2
42420-188: RNCC: 5 | RNVC: 9
42420-188: RNCC: 5 | RNVC: 9

13 Jun 1986

3040-01-233-9852
Shaft Collar

012339852
3161767-11: RNCC: 3 | RNVC: 2
3161767-11: RNCC: 5 | RNVC: 9

5 Jun 1986

3040-01-233-0352
Bracket Mounting

012330352
A3079160: RNCC: 3 | RNVC: 2

23 May 1986

3040-01-238-8826
Remote Control Lever

012388826
DS-830665: RNCC: 3 | RNVC: 9
DS-830665: RNCC: 5 | RNVC: 2
DS-830665: RNCC: 5 | RNVC: 2
830665: RNCC: 5 | RNVC: 9

21 Aug 1986

3040-01-239-3685
Shouldered Shaft

012393685
871283201: RNCC: 3 | RNVC: 2
87183201: RNCC: 5 | RNVC: 9

28 Aug 1986

3040-01-240-3569
Spur Gearshaft

012403569
801341: RNCC: 3 | RNVC: 2
801341: RNCC: 5 | RNVC: 2
801341: RNCC: 5 | RNVC: 2

12 Sep 1986

3040-01-240-6141
Shouldered Shaft

012406141
M8B-21A: RNCC: 3 | RNVC: 2

16 Sep 1986

3040-01-240-7931
Shouldered Shaft

012407931
948F794-1: RNCC: 3 | RNVC: 2
948F794-1: RNCC: 5 | RNVC: 9
948F794-1: RNCC: 5 | RNVC: 9

19 Sep 1986

3040-01-241-3232
Rigid Connecting Link

012413232
D126331: RNCC: 3 | RNVC: 2
D126331: RNCC: 5 | RNVC: 2

24 Sep 1986

3040-01-241-3738
Linear Actuating Cylinder Assembly

012413738
1 1/8 SH-A103: RNCC: 3 | RNVC: 2
ST48D97-1: RNCC: 7 | RNVC: 2

25 Sep 1986

3040-01-242-4595
Remote Control Lever

012424595
419 553 72 13: RNCC: 3 | RNVC: 2

12 Oct 1986

3040-01-243-1024
Remote Control Lever

012431024
9007-DA11: RNCC: 3 | RNVC: 2
A9307-2: RNCC: 3 | RNVC: 9
A9307-2: RNCC: 5 | RNVC: 9
A9307: RNCC: D | RNVC: 9

22 Oct 1986

3040-01-243-3585
Mechanical Drive Housing

012433585
6881979: RNCC: 3 | RNVC: 2
2AX941: RNCC: 5 | RNVC: 2
2AX941: RNCC: 5 | RNVC: 9

24 Oct 1986

3040-01-244-0103
Shouldered Shaft

012440103
176C2552: RNCC: 3 | RNVC: 2

5 Nov 1986

3040-01-245-0244
Rigid Connecting Link

012450244
7-311660015-21: RNCC: 3 | RNVC: 2
7-311660015-21: RNCC: 5 | RNVC: 9

23 Nov 1986

3040-01-245-2522
Rotating Shaft Eye Bracket

012452522
7350779: RNCC: 3 | RNVC: 2

26 Nov 1986

3040-01-245-0282
Control Cam

012450282
42487C: RNCC: 3 | RNVC: 2

23 Nov 1986

3040-01-245-7949
Shouldered Shaft

012457949
2007T72P03: RNCC: 3 | RNVC: 2
207T72P03: RNCC: 5 | RNVC: 9
2007T72: RNCC: D | RNVC: 9

4 Dec 1986

3040-01-245-9891
Manual Control Lever

012459891
97-60-320-11: RNCC: 3 | RNVC: 2
97-60-320-1-1: RNCC: 5 | RNVC: 9

6 Dec 1986

3040-01-248-1514
Counterbalance Weight

012481514
7-311525075-3: RNCC: 3 | RNVC: 2
7-311525075-3: RNCC: 5 | RNVC: 9
7-311525075: RNCC: D | RNVC: 9

16 Jan 1987

3040-01-250-2944
Bell Crank

012502944
75A612602-1001: RNCC: 3 | RNVC: 2

27 Feb 1987

3040-01-250-4308
Spur Gearshaft

012504308
196461-1: RNCC: 3 | RNVC: 2

1 Mar 1987

3040-01-250-7528
Helical Gearshaft

012507528
52298802: RNCC: 3 | RNVC: 2

7 Mar 1987

3040-01-192-4057
Control Cam

011924057
9338496: RNCC: 3 | RNVC: 2
9338496: RNCC: 5 | RNVC: 9

20 Oct 1984

3040-01-192-5692
Straight Shaft

011925692
184622: RNCC: 3 | RNVC: 2
1125523C1: RNCC: 3 | RNVC: 9
184898: RNCC: 5 | RNVC: 9
184894: RNCC: 5 | RNVC: 9

23 Oct 1984

3040-01-188-2979
Control Cam

011882979
30-1000: RNCC: 3 | RNVC: 2
387-3453: RNCC: 5 | RNVC: 2
387-3453: RNCC: 5 | RNVC: 9
387-3453: RNCC: 5 | RNVC: 9

1 Sep 1984

3040-01-248-5109
Linear Actuating Cylinder Piston

012485109
G100441: RNCC: 3 | RNVC: 2

24 Jan 1987

3040-01-248-0529
Shouldered Shaft

012480529
DGR421K0001: RNCC: 3 | RNVC: 1
DGR4350C PT96: RNCC: 5 | RNVC: 1
DGR4350B PT96: RNCC: 5 | RNVC: 1
DGR421K0001: RNCC: 5 | RNVC: 2
DGR421K0001VM: RNCC: 5 | RNVC: 2
DGR4350C PT96VM: RNCC: 5 | RNVC: 2
DGR4350B PT96: RNCC: 5 | RNVC: 2
DGR421K: RNCC: C | RNVC: 1

15 Jan 1987

3040-01-200-9114
Flexible Shaft Assembly

012009114
2001581-2: RNCC: 3 | RNVC: 2

10 Feb 1985

3040-01-200-3585
Bell Crank

012003585
9531M57P01: RNCC: 3 | RNVC: 2
9531M57P01: RNCC: 5 | RNVC: 9
9531M57P01: RNCC: 5 | RNVC: 9
9531M57P01: RNCC: 5 | RNVC: 9
9531M57P01: RNCC: 5 | RNVC: 9

3 Feb 1985

3040-01-186-3395
Shouldered Shaft

011863395
13215E6631: RNCC: 3 | RNVC: 2

9 Aug 1984

3040-01-186-6624
Rigid Connecting Link

011866624
123C10211-601: RNCC: 3 | RNVC: 2
123C10211-601: RNCC: 5 | RNVC: 2
123C10211-601: RNCC: 5 | RNVC: 2
123C10211-601: RNCC: 5 | RNVC: 9

12 Aug 1984

3040-01-187-3124
Counterbalance Weight

011873124
301-315-624-0: RNCC: 3 | RNVC: 2
301-315-624-0: RNCC: 5 | RNVC: 2
301-315-624-0: RNCC: 5 | RNVC: 9

21 Aug 1984

3040-01-187-8234
Counterbalance Weight

011878234
301-510-005-0: RNCC: 3 | RNVC: 2
301-510-005-0: RNCC: 5 | RNVC: 2

25 Aug 1984

3040-01-187-1224
Idler Pulley Cover Assembly

011871224
2238077: RNCC: 3 | RNVC: 2

18 Aug 1984

3040-01-188-8292
Rigid Connecting Link

011888292
5593659: RNCC: 3 | RNVC: 2
12339176: RNCC: 3 | RNVC: 2
5583591: RNCC: 5 | RNVC: 9

8 Sep 1984

3040-01-189-5999
Shouldered Shaft

011895999
4928: RNCC: 3 | RNVC: 2

17 Sep 1984

3040-01-189-8419
Control Cam

011898419
212625: RNCC: 3 | RNVC: 2
212625: RNCC: 5 | RNVC: 9

20 Sep 1984

3040-01-190-8184
Rigid Connecting Link

011908184
300361-107: RNCC: 3 | RNVC: 2
300361-105: RNCC: 5 | RNVC: 9

2 Oct 1984

3040-01-191-4179
Straight Shaft

011914179
1231-190-1: RNCC: 3 | RNVC: 2
1231-190-1: RNCC: C | RNVC: 1

7 Oct 1984

3040-01-191-8932
Rigid Connecting Link

011918932
7566-6204: RNCC: 3 | RNVC: 2
SR11578A-6204: RNCC: 3 | RNVC: 2
LE162-0056-6204: RNCC: 5 | RNVC: 2
LE162-0056: RNCC: 7 | RNVC: 1

13 Oct 1984

3040-01-192-1968
Shouldered Shaft

011921968
2205628-1: RNCC: 3 | RNVC: 2
2204218-1: RNCC: 5 | RNVC: 9

18 Oct 1984

3040-01-192-3559
Shouldered Shaft

011923559
41-309-16: RNCC: 3 | RNVC: 2
1412530-16: RNCC: 5 | RNVC: 2
1412530: RNCC: D | RNVC: 9

19 Oct 1984

3040-01-192-3619
Linear Actuating Cylinder Assembly Parts Kit

011923619
RK2AHL0105: RNCC: 3 | RNVC: 2

19 Oct 1984

3040-01-192-5690
Remote Control Lever

011925690
1-421-900-052: RNCC: 3 | RNVC: 2

23 Oct 1984

3040-01-192-9798
Shaft Retaining Plate

011929798
35328475: RNCC: 3 | RNVC: 2

28 Oct 1984

3040-01-193-0489
Body Hub

011930489
212663: RNCC: 3 | RNVC: 9
212663: RNCC: 5 | RNVC: 2

29 Oct 1984

3040-01-195-7067
Linear Actuating Cylinder

011957067
26308: RNCC: 3 | RNVC: 2

1 Dec 1984

3040-01-196-3934
Governor Linkage Hook

011963934
17604: RNCC: 3 | RNVC: 2
R48516: RNCC: 5 | RNVC: 9
R48516: RNCC: 5 | RNVC: 9
17604: RNCC: 5 | RNVC: 9

11 Dec 1984

3040-01-196-1505
Pawl

011961505
11571300-11: RNCC: 3 | RNVC: 9
11441400 ITEM 2: RNCC: 5 | RNVC: 2
11571300-11: RNCC: 5 | RNVC: 2
11441400 ITEM 2: RNCC: 5 | RNVC: 9
11441400 ITEM 2: RNCC: 5 | RNVC: 9
11571300-11: RNCC: 5 | RNVC: 9
11441400: RNCC: D | RNVC: 9

7 Dec 1984

3040-01-196-1432
Linear Actuating Cylinder

011961432
N16447: RNCC: 3 | RNVC: 2
20232N PIECE 22: RNCC: 3 | RNVC: 2
16447: RNCC: 5 | RNVC: 9
20232N: RNCC: D | RNVC: 9

7 Dec 1984

3040-01-196-4922
Rigid Connecting Link

011964922
12329218-2: RNCC: 3 | RNVC: 2
10085875: RNCC: 6 | RNVC: 9

12 Dec 1984

3040-01-196-9983
Counterbalance Weight

011969983
952B928-3: RNCC: 3 | RNVC: 2
952B928-3: RNCC: 5 | RNVC: 9

17 Dec 1984

3040-01-197-7214
Helical Gearshaft

011977214
60-415-0106-1: RNCC: 3 | RNVC: 2

26 Dec 1984

3040-01-197-5512
Shaft Collar

011975512
12336125: RNCC: 3 | RNVC: 2

22 Dec 1984

3040-01-197-8659
Manual Control Lever

011978659
7096-001: RNCC: 3 | RNVC: 2
B-71291 INDEX 13: RNCC: 5 | RNVC: 2
B-71291: RNCC: D | RNVC: 9

29 Dec 1984

3040-01-198-4359
Counterbalance Weight

011984359
1285M92P01: RNCC: 3 | RNVC: 2

9 Jan 1985

3040-01-198-4364
Counterbalance Weight

011984364
1285M93P02: RNCC: 3 | RNVC: 2

9 Jan 1985

3040-01-199-1697
Brake Shaft

011991697
PDB-0719: RNCC: 3 | RNVC: 9

17 Jan 1985

3040-01-199-8085
Manual Control Lever

011998085
040-07556-000: RNCC: 3 | RNVC: 2
40-7556: RNCC: 5 | RNVC: 9
5342PL0794041: RNCC: 6 | RNVC: 9

25 Jan 1985

3040-01-200-0938
Linear Actuating Cylinder Head

012000938
6-372-002204: RNCC: 3 | RNVC: 2
4053745: RNCC: 5 | RNVC: 2
4053745: RNCC: 5 | RNVC: 9

30 Jan 1985

3040-01-200-0935
Linear Actuating Cylinder Piston

012000935
6-701-000178: RNCC: 3 | RNVC: 2
2CD643: RNCC: 5 | RNVC: 2
2CD643: RNCC: 5 | RNVC: 9

30 Jan 1985

3040-01-200-2423
Linear Actuating Cylinder Cap

012002423
6-372-002432: RNCC: 3 | RNVC: 2
2CD628: RNCC: C | RNVC: 1

31 Jan 1985

3040-01-201-1076
Remote Control Lever

012011076
12335453: RNCC: 3 | RNVC: 2
12335453: RNCC: 5 | RNVC: 2

12 Feb 1985

3040-01-201-4817
Rigid Connecting Link

012014817
12336826: RNCC: 3 | RNVC: 2

19 Feb 1985

3040-01-201-9991
Rigid Connecting Link

012019991
4450-048: RNCC: 3 | RNVC: 2

27 Feb 1985

3040-01-202-3385
Brake Shoe Parts Kit

012023385
PK664: RNCC: 3 | RNVC: 2
PK664: RNCC: 5 | RNVC: 9
PK664: RNCC: C | RNVC: 1
601239: RNCC: C | RNVC: 1

1 Mar 1985

3040-01-202-6491
Counterbalance Weight

012026491
8050049-002: RNCC: 3 | RNVC: 9
X8050049-002: RNCC: 5 | RNVC: 9

5 Mar 1985

3040-01-203-4242
Manual Control Lever

012034242
314 3252: RNCC: 3 | RNVC: 2

14 Mar 1985

3040-01-203-4244
Linear Actuating Cylinder Cap

012034244
309 2763: RNCC: 3 | RNVC: 2
348 6974: RNCC: D | RNVC: 9

14 Mar 1985

3040-01-204-2428
Counterbalance Weight

012042428
4502-082: RNCC: 3 | RNVC: 2

23 Mar 1985

3040-01-204-4279
Shaft Assembly

012044279
123C13232-1: RNCC: 3 | RNVC: 2
123FTC131-3: RNCC: 5 | RNVC: 9
123C13232-1: RNCC: 5 | RNVC: 9
123C13232-1: RNCC: 5 | RNVC: 9

26 Mar 1985

3040-01-203-5757
Rigid Connecting Link

012035757
L6311117-007: RNCC: 3 | RNVC: 2

15 Mar 1985

3040-01-204-9798
Rigid Connecting Link

012049798
4454-074: RNCC: 3 | RNVC: 2

2 Apr 1985

3040-01-205-7534
Shouldered Shaft

012057534
RG54668-2: RNCC: 3 | RNVC: 2

11 Apr 1985

3040-01-209-6727
Push-Pull Control Assembly

012096727
L6410347-007: RNCC: 3 | RNVC: 2
L6410347-005: RNCC: 5 | RNVC: 2

4 Jun 1985

3040-01-211-0924
Pneumatic Actuator Cylinder Housing

012110924
BMD-185-5: RNCC: 3 | RNVC: 9

21 Jun 1985

3040-01-212-8589
Spur Gearshaft

012128589
42249E24: RNCC: 3 | RNVC: 2

19 Jul 1985

3040-01-213-8111
Rigid Connecting Link

012138111
4060110: RNCC: 3 | RNVC: 2
4060110A: RNCC: 5 | RNVC: 2

31 Jul 1985

3040-01-214-1603
Control Cam

012141603
4-198-2-00049: RNCC: 3 | RNVC: 2
2CT133: RNCC: 5 | RNVC: 2
2CT133: RNCC: 5 | RNVC: 9

6 Aug 1985

3040-01-214-1605
Control Cam

012141605
23018024: RNCC: 3 | RNVC: 2
23018024: RNCC: 8 | RNVC: 2

6 Aug 1985

3040-01-214-4507
Rigid Connecting Link

012144507
6-768-001713: RNCC: 3 | RNVC: 2
2CT200: RNCC: 5 | RNVC: 2
2CT200: RNCC: 5 | RNVC: 9

10 Aug 1985

3040-01-216-1098
Axle Brake

012161098
T001412526: RNCC: 3 | RNVC: 2
T001412526: RNCC: 3 | RNVC: 9
T001412526: RNCC: 5 | RNVC: 2
1-412526: RNCC: 5 | RNVC: 2
412526: RNCC: 5 | RNVC: 9
1-412526: RNCC: 5 | RNVC: 9

6 Sep 1985

3040-01-216-4320
Rigid Connecting Link

012164320
4900-151: RNCC: 3 | RNVC: 2
75J618002-151: RNCC: 3 | RNVC: 9
75J618002-151: RNCC: 5 | RNVC: 2
B889100-151: RNCC: 5 | RNVC: 9
75B618002-151: RNCC: 7 | RNVC: 2
4900: RNCC: D | RNVC: 9

11 Sep 1985

3040-01-217-1122
Shouldered Shaft

012171122
23017955: RNCC: 3 | RNVC: 2
23017955: RNCC: 8 | RNVC: 2

21 Sep 1985

3040-01-218-8257
Rotating Shaft Eye Bracket

012188257
2721674: RNCC: 3 | RNVC: 2
8485-38: RNCC: 5 | RNVC: 2
8223-46: RNCC: 5 | RNVC: 9

19 Oct 1985

3040-01-218-4397
Rigid Connecting Link

012184397
123CSM40008-601: RNCC: 3 | RNVC: 2
123SCM40008-601: RNCC: 3 | RNVC: 9
123CSM40008-601: RNCC: 5 | RNVC: 9
123CSM40008-1: RNCC: E | RNVC: 8

11 Oct 1985

3040-01-219-3448
Bell Crank

012193448
4E33206-103B: RNCC: 3 | RNVC: 2

25 Oct 1985

3040-01-219-5639
Straight Shaft

012195639
62931: RNCC: 3 | RNVC: 2
62931: RNCC: 5 | RNVC: 1

29 Oct 1985

3040-01-221-5607
Shouldered Shaft

012215607
1502940: RNCC: 3 | RNVC: 2
1502940: RNCC: 5 | RNVC: 9

29 Nov 1985

3040-01-221-9323
Counterbalance Weight

012219323
8019131-034: RNCC: 3 | RNVC: 9

5 Dec 1985

3040-01-222-0265
Shouldered Shaft

012220265
23045917: RNCC: 3 | RNVC: 2

6 Dec 1985

3040-01-222-3082
Counterbalance Weight

012223082
8019131-019: RNCC: 3 | RNVC: 9

10 Dec 1985

3040-01-222-3818
Control Cam

012223818
2664339: RNCC: 3 | RNVC: 2

11 Dec 1985

3040-01-222-4717
Shaft Retaining Plate

012224717
324317: RNCC: 3 | RNVC: 2
9126280930: RNCC: 5 | RNVC: 2
324317: RNCC: 5 | RNVC: 9
9126280930: RNCC: 5 | RNVC: 9

12 Dec 1985

3040-01-222-7825
Shouldered Shaft

012227825
40001-1106-01: RNCC: 3 | RNVC: 2

17 Dec 1985

3040-01-222-9454
Spur Gearshaft

012229454
2670861: RNCC: 3 | RNVC: 2

20 Dec 1985

3040-01-222-9719
Nonrotating Shaft Eye Bracket

012229719
1449020: RNCC: 3 | RNVC: 2
1449020: RNCC: 5 | RNVC: 9

20 Dec 1985

3040-01-222-9428
Rigid Connecting Link

012229428
4066657: RNCC: 3 | RNVC: 2
4066657: RNCC: 5 | RNVC: 2
4066657: RNCC: 5 | RNVC: 2
4066657: RNCC: 5 | RNVC: 2
4066657: RNCC: 5 | RNVC: 2
4066657: RNCC: 5 | RNVC: 9

20 Dec 1985

3040-01-222-1833
Counterbalance Weight

012221833
8019131-006: RNCC: 3 | RNVC: 9

7 Dec 1985

3040-01-224-6468
Control Cam

012246468
2673207: RNCC: 3 | RNVC: 2

19 Jan 1986

3040-01-224-8859
Control Cam

012248859
2673954: RNCC: 3 | RNVC: 2

24 Jan 1986

3040-01-226-2667
Shouldered Shaft

012262667
1244582-1: RNCC: 3 | RNVC: 9
1244582-1: RNCC: 5 | RNVC: 9

14 Feb 1986

3040-01-226-6496
Straight Shaft

012266496
10072-020: RNCC: 3 | RNVC: 2
10072-020: RNCC: 5 | RNVC: 9
10072-010: RNCC: 5 | RNVC: 9
10072: RNCC: 5 | RNVC: 9

20 Feb 1986

3040-01-226-7316
Rigid Connecting Link

012267316
5750034-009: RNCC: 3 | RNVC: 2
5750057-003: RNCC: C | RNVC: 1

21 Feb 1986

3040-01-227-8545
Shouldered Shaft

012278545
60244-40812: RNCC: 3 | RNVC: 2

11 Mar 1986

3040-01-227-8991
Shouldered Shaft

012278991
7364434: RNCC: 3 | RNVC: 2

12 Mar 1986

3040-01-228-7756
Shouldered Shaft

012287756
803-4384681-A-78: RNCC: 3 | RNVC: 2
803-4384681: RNCC: D | RNVC: 9

21 Mar 1986

3040-01-229-4388
Nonrotating Shaft Eye Bracket

012294388
1395AS278: RNCC: 3 | RNVC: 2

2 Apr 1986

3040-01-229-9045
Rigid Connecting Link

012299045
68A351129-1005: RNCC: 3 | RNVC: 2
68A351129-1005: RNCC: 5 | RNVC: 2
68A351129-1005: RNCC: 5 | RNVC: 9
68A351129: RNCC: D | RNVC: 9

6 Apr 1986

3040-01-230-5637
Linear Actuating Cylinder Piston

012305637
400553B: RNCC: 3 | RNVC: 2
2CX405: RNCC: 5 | RNVC: 2
2CX405: RNCC: 5 | RNVC: 9
19022-306: RNCC: 5 | RNVC: 9

16 Apr 1986

3040-01-231-0975
Shouldered Shaft

012310975
86417: RNCC: 3 | RNVC: 2
86417: RNCC: 5 | RNVC: 2
86417: RNCC: 5 | RNVC: 9
86417: RNCC: 5 | RNVC: 9

23 Apr 1986

3040-01-234-1824
Spur Gearshaft

012341824
2CK144: RNCC: 3 | RNVC: 2
WLM290082: RNCC: 5 | RNVC: 2
9-734-100654: RNCC: 5 | RNVC: 9
2CK144: RNCC: 5 | RNVC: 9
WLM290082: RNCC: 5 | RNVC: 9
290082: RNCC: 5 | RNVC: 9
9-734-100654: RNCC: 5 | RNVC: 9

9 Jun 1986

3040-01-234-4982
Ball Joint

012344982
2CR557: RNCC: 3 | RNVC: 2
L-28-SV-5212-B-10: RNCC: 5 | RNVC: 2
2CR557: RNCC: 5 | RNVC: 9
L28SV5212B11: RNCC: C | RNVC: 1
2CB444: RNCC: C | RNVC: 1

14 Jun 1986

3040-01-234-8467
Shaft Collar

012348467
8925751: RNCC: 3 | RNVC: 2
2GH636: RNCC: 5 | RNVC: 2
019-90006-17: RNCC: 5 | RNVC: 2
441904-0002: RNCC: 5 | RNVC: 9
2GH636: RNCC: 5 | RNVC: 9
441904-2: RNCC: 5 | RNVC: 9
441904: RNCC: 5 | RNVC: 9

21 Jun 1986

3040-01-236-1252
Rigid Connecting Link

012361252
T44561: RNCC: 3 | RNVC: 2
T44561: RNCC: 5 | RNVC: 9

12 Jul 1986

3040-01-236-2469
Shouldered Shaft

012362469
1532301-3: RNCC: 3 | RNVC: 2
1532301-3: RNCC: 5 | RNVC: 9

15 Jul 1986

3040-01-233-9854
Shouldered Shaft

012339854
AD32772-3: RNCC: 3 | RNVC: 2
AD32772-3: RNCC: 5 | RNVC: 2

5 Jun 1986

3040-01-237-2885
Pawl

012372885
945532-105: RNCC: 3 | RNVC: 2
945532-105: RNCC: 5 | RNVC: 2
945532: RNCC: D | RNVC: 9

29 Jul 1986

3040-01-237-6369
Brake Disc

012376369
4-253-897-000-0: RNCC: 3 | RNVC: 2
6-114-200-912-9 KEY 6: RNCC: 5 | RNVC: 9
4-253-047-000-0: RNCC: 5 | RNVC: 9
4-253-897-000-0: RNCC: C | RNVC: 1
6-114-200-912-9: RNCC: D | RNVC: 9

3 Aug 1986

3040-01-237-6977
Clutch Slave Cylinder

012376977
001 295 73 07: RNCC: 3 | RNVC: 2
263.207.00K014: RNCC: 5 | RNVC: 2

5 Aug 1986

3040-01-238-1852
Bell Crank

012381852
406 300 09 04: RNCC: 3 | RNVC: 2
406 300 09 04: RNCC: 5 | RNVC: 2
406 300 09 04: RNCC: 5 | RNVC: 9

12 Aug 1986

3040-01-237-6435
Rigid Connecting Link

012376435
406 881 01 27: RNCC: 3 | RNVC: 2
406 881 01 27: RNCC: 5 | RNVC: 2
406 881 01 27: RNCC: 5 | RNVC: 9

3 Aug 1986

3040-01-238-3352
Shouldered Shaft

012383352
883889-2: RNCC: 3 | RNVC: 2

13 Aug 1986

3040-01-238-8773
Shouldered Shaft

012388773
DS-842679: RNCC: 3 | RNVC: 2
842679: RNCC: 5 | RNVC: 9

21 Aug 1986

3040-01-238-3985
Linear Actuating Cylinder Assembly

012383985
1H2H0A00279263: RNCC: 3 | RNVC: 2
AG146145A0: RNCC: 5 | RNVC: 9

14 Aug 1986

3040-01-240-9673
Linear Actuating Cylinder Assembly Parts Kit

012409673
LK1607311M91: RNCC: 3 | RNVC: 2

20 Sep 1986

3040-01-242-2561
Rigid Connecting Link

012422561
7600-5301H: RNCC: 3 | RNVC: 2
LE162-0067-5301: RNCC: 3 | RNVC: 2
LE162-0067-5301: RNCC: 5 | RNVC: 2
LE 62-0067-5301: RNCC: 5 | RNVC: 9
5301-7600: RNCC: 5 | RNVC: 9
LE162-0067: RNCC: 7 | RNVC: 1

9 Oct 1986

3040-01-242-7949
Linear Actuating Cylinder Piston Rod

012427949
13211E3014: RNCC: 3 | RNVC: 2

17 Oct 1986

3040-01-241-4818
Shaft Retaining Plate

012414818
M12WHR50-L: RNCC: 3 | RNVC: 9
M10WH100-1: RNCC: 5 | RNVC: 9
M10WH100: RNCC: D | RNVC: 9

26 Sep 1986

3040-01-243-7888
Linear Actuating Cylinder Piston

012437888
25-66910-1: RNCC: 3 | RNVC: 2

31 Oct 1986

3040-01-243-6475
Rigid Connecting Link

012436475
SAM-F870-0004: RNCC: 3 | RNVC: 2
SHE-F870-0004: RNCC: 5 | RNVC: 2
SAM-F870-0004: RNCC: 5 | RNVC: 9
SHE-F870-0004: RNCC: 5 | RNVC: 9

30 Oct 1986

3040-01-243-7153
Transmission Collar Assembly

012437153
955481-101: RNCC: 3 | RNVC: 2
955481-101: RNCC: 5 | RNVC: 2
955481: RNCC: D | RNVC: 9

31 Oct 1986

3040-01-245-1530
Straight Shaft

012451530
701208: RNCC: 3 | RNVC: 2

24 Nov 1986

3040-01-245-6791
Linear Actuating Cylinder Assembly

012456791
627-01041-30M: RNCC: 3 | RNVC: 2
627-01041-30M: RNCC: 5 | RNVC: 2

3 Dec 1986

3040-01-246-7144
Worm Shaft

012467144
742848: RNCC: 3 | RNVC: 2

18 Dec 1986

3040-01-246-7847
Spur Gearshaft

012467847
1395AS215: RNCC: 3 | RNVC: 2
1395AS215: RNCC: 5 | RNVC: 2

18 Dec 1986

3040-01-247-1519
Shouldered Shaft

012471519
162B8114-2: RNCC: 3 | RNVC: 2

26 Dec 1986

3040-01-248-3723
Brake Backing Plate

012483723
8-005-703-01: RNCC: 3 | RNVC: 2
N1-087-602-A ITEM 5: RNCC: 5 | RNVC: 9

23 Jan 1987

3040-01-248-3894
Shouldered Shaft

012483894
609141-1-RA: RNCC: 3 | RNVC: 2
609141-1-RA: RNCC: 5 | RNVC: 9

23 Jan 1987

3040-01-248-5220
Bevel Gearshaft

012485220
2041771-1: RNCC: 3 | RNVC: 2
2041771-1: RNCC: 5 | RNVC: 9
10106983: RNCC: 6 | RNVC: 9

24 Jan 1987

3040-01-249-1435
Shaft Retaining Plate

012491435
5593692: RNCC: 3 | RNVC: 2
12338456: RNCC: 3 | RNVC: 2
5583613: RNCC: C | RNVC: 1
5593692-C: RNCC: D | RNVC: 9

6 Feb 1987

3040-01-249-6698
Knurled Roller

012496698
12102003-101: RNCC: 3 | RNVC: 9
12102003-101: RNCC: 5 | RNVC: 2
12102003-101: RNCC: 5 | RNVC: 9

14 Feb 1987

3040-01-250-4224
Shouldered Shaft

012504224
609143-10-RA: RNCC: 3 | RNVC: 9
609143-10-RA: RNCC: C | RNVC: 1

1 Mar 1987

3040-01-251-4030
Flexible Drive Shaft

012514030
AM2791-12-17: RNCC: 3 | RNVC: 2
10106987: RNCC: 6 | RNVC: 9

19 Mar 1987

3040-01-186-3590
Shouldered Shaft

011863590
6718-0000: RNCC: 3 | RNVC: 2

10 Aug 1984

3040-01-186-8577
Linear Actuating Cylinder

011868577
1489D10-1: RNCC: 3 | RNVC: 2

16 Aug 1984

3040-01-186-8578
Pawl

011868578
508196-01: RNCC: 3 | RNVC: 2
508196-01: RNCC: 5 | RNVC: 2
508196-01: RNCC: 5 | RNVC: 9
508196: RNCC: D | RNVC: 9

16 Aug 1984

3040-01-187-3121
Counterbalance Weight

011873121
301-332-446-0: RNCC: 3 | RNVC: 2
301-332-446-0: RNCC: 5 | RNVC: 2
301-332-446-0: RNCC: 5 | RNVC: 2
301-332-435-0: RNCC: 5 | RNVC: 9
301-332-435-0: RNCC: 5 | RNVC: 9
301-332-435-0: RNCC: 5 | RNVC: 9

21 Aug 1984

3040-01-187-3129
Counterbalance Weight

011873129
301-332-450-0: RNCC: 3 | RNVC: 2
301-332-439-0: RNCC: 5 | RNVC: 2
301-332-439-0: RNCC: 5 | RNVC: 9

21 Aug 1984

3040-01-187-3126
Counterbalance Weight

011873126
301-332-447-0: RNCC: 3 | RNVC: 2
301-332-436-0: RNCC: 5 | RNVC: 9
301-332-436-0: RNCC: 5 | RNVC: 9
301-332-436-0: RNCC: 5 | RNVC: 9

21 Aug 1984

3040-01-188-3747
Control Cam

011883747
363B180-1: RNCC: 3 | RNVC: 2
363B180-1: RNCC: 5 | RNVC: 9
363B180-1: RNCC: 5 | RNVC: 9

2 Sep 1984

3040-01-187-9978
Multiple Gears Gearshaft

011879978
5007090: RNCC: 3 | RNVC: 2

29 Aug 1984

3040-01-189-2172
Manual Control Lever

011892172
5583598: RNCC: 3 | RNVC: 2
12338459: RNCC: 3 | RNVC: 2
5583598-C: RNCC: 5 | RNVC: 2
2520011892172: RNCC: 6 | RNVC: 9

13 Sep 1984

3040-01-189-2619
Counterbalance Weight

011892619
301-315-628-0: RNCC: 3 | RNVC: 2
301-315-628-0: RNCC: 5 | RNVC: 2

13 Sep 1984

3040-01-189-2922
Manual Control Lever

011892922
382-812-040-401-026: RNCC: 3 | RNVC: 2

14 Sep 1984

3040-01-189-6604
Shouldered Shaft

011896604
239148: RNCC: 3 | RNVC: 2
239148: RNCC: 5 | RNVC: 2
239148: RNCC: 5 | RNVC: 9
239148: RNCC: 5 | RNVC: 9

18 Sep 1984

3040-01-191-6640
Spur Gearshaft

011916640
29172: RNCC: 3 | RNVC: 2

11 Oct 1984

3040-01-192-9757
Helical Gearshaft

011929757
9024D32-1: RNCC: 3 | RNVC: 2
9024D32-1: RNCC: 5 | RNVC: 9
9024D32: RNCC: D | RNVC: 9
9024D32: RNCC: D | RNVC: 9

28 Oct 1984

3040-01-192-9197
Shouldered Shaft

011929197
014419-1: RNCC: 3 | RNVC: 2
014419-1: RNCC: 3 | RNVC: 9

27 Oct 1984

3040-01-193-1757
Shaft Retaining Plate

011931757
6-400-000117: RNCC: 3 | RNVC: 2
2CD630: RNCC: 5 | RNVC: 2
2CD630: RNCC: 5 | RNVC: 9

31 Oct 1984

3040-01-193-3522
Control Cam

011933522
40039: RNCC: 3 | RNVC: 2

1 Nov 1984

3040-01-193-3615
Pawl

011933615
515-4457070 ITEM 70: RNCC: 3 | RNVC: 2
6002-107 ITEM 70: RNCC: 5 | RNVC: 2
515-4457070: RNCC: D | RNVC: 9

1 Nov 1984

3040-01-193-7719
Shouldered Shaft

011937719
515-4457070 ITEM 80: RNCC: 3 | RNVC: 2
6002-107 ITEM 80: RNCC: 5 | RNVC: 9
515-4457070: RNCC: D | RNVC: 9

7 Nov 1984

3040-01-193-7810
Linear Actuating Cylinder Cap

011937810
C603136: RNCC: 3 | RNVC: 2
603136: RNCC: 5 | RNVC: 9
1125978C1: RNCC: 5 | RNVC: 9

7 Nov 1984

3040-01-194-6733
Shaft Retaining Plate

011946733
V2-163-592-02: RNCC: 3 | RNVC: 2
0-161-000-49 REVG PC052: RNCC: 5 | RNVC: 9
2-163-592-02: RNCC: 5 | RNVC: 9
2-163-592-02: RNCC: 5 | RNVC: 9

16 Nov 1984

3040-01-197-8727
Rotating Shaft Eye Bracket

011978727
12446767: RNCC: 3 | RNVC: 2
5584798: RNCC: 5 | RNVC: 9
12340105: RNCC: 5 | RNVC: 9
3040PL1946969: RNCC: 6 | RNVC: 9
12446767: RNCC: C | RNVC: 1

29 Dec 1984

3040-01-197-8691
Linear Actuating Cylinder Assembly

011978691
102-50241-01: RNCC: 3 | RNVC: 9
11025D: RNCC: 5 | RNVC: 9
2AW172: RNCC: 5 | RNVC: 9
102-4283-1: RNCC: 5 | RNVC: 9

29 Dec 1984

3040-01-198-0699
Linear Actuating Cylinder Assembly

011980699
319 6461: RNCC: 3 | RNVC: 2

4 Jan 1985

3040-01-197-8326
Linear Actuating Cylinder Piston Rod

011978326
344 5861: RNCC: 3 | RNVC: 2

29 Dec 1984

3040-01-198-3745
Control Cam

011983745
3035-262: RNCC: 3 | RNVC: 2

7 Jan 1985

3040-01-199-3226
Tachometer-Speedometer Drive Shaft

011993226
029-20541: RNCC: 3 | RNVC: 2

20 Jan 1985

3040-01-199-5774
With Roller Lever

011995774
802T-W2D: RNCC: 3 | RNVC: 2

23 Jan 1985

3040-01-199-6753
Shaft Retaining Plate

011996753
UA8644: RNCC: 3 | RNVC: 9
T45290: RNCC: 5 | RNVC: 2
T45290: RNCC: 5 | RNVC: 9

24 Jan 1985

3040-01-199-8130
Ball Joint

011998130
AM-132: RNCC: 3 | RNVC: 2
AM132: RNCC: 5 | RNVC: 9

25 Jan 1985

3040-01-200-3584
Bell Crank

012003584
9531M55P01: RNCC: 3 | RNVC: 2
9531M55P01: RNCC: 5 | RNVC: 2
2117M51P01: RNCC: 5 | RNVC: 2
9531M55P01: RNCC: 5 | RNVC: 2
9531M55P01: RNCC: 5 | RNVC: 2
9531M55P01: RNCC: 5 | RNVC: 9
9531M55P01: RNCC: 5 | RNVC: 9
9531M55P01: RNCC: C | RNVC: 1

3 Feb 1985

3040-01-201-2614
Linear Actuating Cylinder

012012614
3.25BC2HLTS13X46.00: RNCC: 3 | RNVC: 2
3.25 BC 2HLTS13A X 46.00: RNCC: 3 | RNVC: 9
H6C-N3.2N 46.00N1.38T4511: RNCC: 5 | RNVC: 2
627662-1: RNCC: 5 | RNVC: 2
3 1-4BC2HLTS13X46IN: RNCC: 5 | RNVC: 9
3 1/4BC2HLTS13X: RNCC: C | RNVC: 1
31-4BC2HLTS13K4: RNCC: C | RNVC: 1

14 Feb 1985

3040-01-201-8500
Shouldered Shaft

012018500
NF203092-1: RNCC: 3 | RNVC: 2

22 Feb 1985

3040-01-201-9596
Shouldered Shaft

012019596
A02R2851-10: RNCC: 3 | RNVC: 2

26 Feb 1985

3040-01-202-7042
Shouldered Shaft

012027042
753692-1: RNCC: 3 | RNVC: 2

5 Mar 1985

3040-01-202-6507
Control Cam

012026507
3032-468: RNCC: 3 | RNVC: 2

5 Mar 1985

3040-01-202-7784
Shouldered Shaft

012027784
8267868: RNCC: 3 | RNVC: 2
8267868: RNCC: 5 | RNVC: 2

6 Mar 1985

3040-01-202-7270
Control Cam

012027270
2012A10A: RNCC: 3 | RNVC: 2
2012A10A: RNCC: 7 | RNVC: 9
2012A10A: RNCC: C | RNVC: 1

5 Mar 1985

3040-01-203-4127
Shaft Collar

012034127
NA1063 ITEM 35B: RNCC: 3 | RNVC: 2
NA1063: RNCC: 3 | RNVC: 2
35-0005-01: RNCC: 5 | RNVC: 2
PL80SLV-5 ITEM 35B: RNCC: 5 | RNVC: 9
8-0SL-6 ITEM 35: RNCC: C | RNVC: 1
NG14145 ITEM 35: RNCC: C | RNVC: 1

14 Mar 1985

3040-01-203-5222
Straight Shaft

012035222
A13-2700: RNCC: 3 | RNVC: 9

15 Mar 1985

3040-01-204-9580
Shouldered Shaft

012049580
12598: RNCC: 3 | RNVC: 2

2 Apr 1985

3040-01-204-9801
Shaft Retaining Plate

012049801
1432440: RNCC: 3 | RNVC: 2
1432440: RNCC: 5 | RNVC: 9

2 Apr 1985

3040-01-205-0801
Shaft Assembly

012050801
0-141-050-06: RNCC: 3 | RNVC: 2
0-141-050-06: RNCC: 5 | RNVC: 2
0-141-050-06: RNCC: 5 | RNVC: 9

4 Apr 1985

3040-01-205-9657
Manual Control Lever Assembly

012059657
9338180: RNCC: 3 | RNVC: 2
3040012059657: RNCC: 6 | RNVC: 9

12 Apr 1985

3040-01-206-5759
Bell Crank

012065759
L3223631-001: RNCC: 3 | RNVC: 2
L3223631-001: RNCC: 5 | RNVC: 2

19 Apr 1985

3040-01-208-7853
Shouldered Shaft

012087853
753385-3: RNCC: 3 | RNVC: 2

20 May 1985

3040-01-209-2694
Shaft

012092694
311407: RNCC: 3 | RNVC: 2
311407: RNCC: 5 | RNVC: 2

26 May 1985

3040-01-209-9041
Spur Gearshaft

012099041
728457: RNCC: 3 | RNVC: 2

5 Jun 1985

3040-01-212-2058
Linear Actuating Cylinder Assembly Parts Kit

012122058
G103221: RNCC: 3 | RNVC: 2

8 Jul 1985

3040-01-211-8627
Rigid Connecting Link

012118627
4900-101: RNCC: 3 | RNVC: 2
75J618002-101: RNCC: 5 | RNVC: 2
B889100-101: RNCC: 5 | RNVC: 2
75B618002-101: RNCC: 7 | RNVC: 2

2 Jul 1985

3040-01-212-2526
Transmission Sleeve

012122526
L6411230-051: RNCC: 3 | RNVC: 2

10 Jul 1985

3040-01-213-7952
Link-Pivot-Dog

012137952
1147-41-1: RNCC: 3 | RNVC: 2

31 Jul 1985

3040-01-213-8551
Shaft Collar

012138551
7-07-090: RNCC: 3 | RNVC: 2
2BG385: RNCC: 5 | RNVC: 2
2BG385: RNCC: 5 | RNVC: 9
A-18483: RNCC: D | RNVC: 9

1 Aug 1985

3040-01-213-8036
Straight Shaft

012138036
A3-22: RNCC: 3 | RNVC: 2
SS125: RNCC: 3 | RNVC: 2
G4-18: RNCC: 5 | RNVC: 2
GS3120: RNCC: 5 | RNVC: 2
340095-02: RNCC: 5 | RNVC: 9
DA3D22: RNCC: 5 | RNVC: 9
S4-22: RNCC: 5 | RNVC: 9
0570C00008-3: RNCC: 5 | RNVC: 9
0570C0008-3: RNCC: C | RNVC: 1
0570C0008: RNCC: D | RNVC: 9

31 Jul 1985

3040-01-214-3175
Spur Gearshaft

012143175
23018022: RNCC: 3 | RNVC: 2
23018022: RNCC: 8 | RNVC: 2

8 Aug 1985

3040-01-214-3244
Pawl

012143244
4-198-1-00111: RNCC: 3 | RNVC: 2
2CT127: RNCC: 5 | RNVC: 2
2CT127: RNCC: 5 | RNVC: 9

8 Aug 1985

3040-01-214-3186
Linear Actuating Cylinder Piston

012143186
6-701-000241: RNCC: 3 | RNVC: 2
2CT178: RNCC: 5 | RNVC: 2
2CT178: RNCC: 5 | RNVC: 9

8 Aug 1985

3040-01-214-3919
Linear Actuating Cylinder Cap

012143919
6-372-002421: RNCC: 3 | RNVC: 2
2CT151: RNCC: 5 | RNVC: 2
2CT151: RNCC: 5 | RNVC: 9

9 Aug 1985

3040-01-215-2220
Shouldered Shaft

012152220
101427-1: RNCC: 3 | RNVC: 2
101427-1: RNCC: 5 | RNVC: 2

22 Aug 1985

3040-01-215-3081
Bell Crank

012153081
11438726: RNCC: 3 | RNVC: 2
11438726: RNCC: 5 | RNVC: 1
11438726: RNCC: 5 | RNVC: 1

23 Aug 1985

3040-01-215-8780
Shouldered Shaft

012158780
C20035D059: RNCC: 3 | RNVC: 2

1 Sep 1985

3040-01-216-0628
Counterbalance Weight

012160628
584943CL4: RNCC: 3 | RNVC: 2
584943CL4: RNCC: 5 | RNVC: 2
584943CL4: RNCC: 5 | RNVC: 2
584943CL4: RNCC: 5 | RNVC: 2
584943CL4: RNCC: 5 | RNVC: 9

6 Sep 1985

3040-01-216-3114
Torque Assembly

012163114
65022: RNCC: 3 | RNVC: 2

7 Sep 1985

3040-01-216-5337
Straight Shaft

012165337
12303040: RNCC: 3 | RNVC: 2

12 Sep 1985

3040-01-217-6780
Remote Control Lever

012176780
3825062-1: RNCC: 3 | RNVC: 2

29 Sep 1985

3040-01-218-6145
Hydraulic Accumulator

012186145
82A5052A0501: RNCC: 3 | RNVC: 2
810070-1: RNCC: 5 | RNVC: 2
BA001B3U01Y2: RNCC: 5 | RNVC: 2
19009A0602: RNCC: 5 | RNVC: 2
BA001B3U01A1: RNCC: 5 | RNVC: 9
82A5052A0501: RNCC: 5 | RNVC: 9
AW5052A0501: RNCC: 5 | RNVC: 9

16 Oct 1985

3040-01-219-1535
Counterbalance Weight

012191535
8019129-007: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-1547
Counterbalance Weight

012191547
8019129-019: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-1552
Counterbalance Weight

012191552
8019129-024: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-3415
Straight Shaft

012193415
68A582106-2001: RNCC: 3 | RNVC: 2

25 Oct 1985

3040-01-219-6638
Spur Gearshaft

012196638
BL-11389-1: RNCC: 3 | RNVC: 2
BL-11389: RNCC: D | RNVC: 9

31 Oct 1985

3040-01-219-7489
Carrier Assembly

012197489
X208746B: RNCC: 3 | RNVC: 9
X208746A: RNCC: 5 | RNVC: 9

2 Nov 1985

3040-01-220-4382
Shouldered Shaft

012204382
788197-3: RNCC: 3 | RNVC: 2
788197-2: RNCC: 5 | RNVC: 9

13 Nov 1985

3040-01-221-1489
Worm Shaft

012211489
1100333: RNCC: 3 | RNVC: 2

24 Nov 1985

3040-01-221-8828
Straight Shaft

012218828
27297: RNCC: 3 | RNVC: 2
27297: RNCC: 5 | RNVC: 9

5 Dec 1985

3040-01-221-8889
Linear Actuating Cylinder Assembly Parts Kit

012218889
328971X: RNCC: 3 | RNVC: 2
2CX334: RNCC: 5 | RNVC: 2
2CX334: RNCC: 5 | RNVC: 9

5 Dec 1985

3040-01-221-9316
Counterbalance Weight

012219316
8019131-027: RNCC: 3 | RNVC: 9

5 Dec 1985

3040-01-221-9322
Counterbalance Weight

012219322
8019131-033: RNCC: 3 | RNVC: 9

5 Dec 1985

3040-01-221-9328
Counterbalance Weight

012219328
8019131-040: RNCC: 3 | RNVC: 9

5 Dec 1985

3040-01-222-1844
Counterbalance Weight

012221844
8019131-017: RNCC: 3 | RNVC: 9

7 Dec 1985

3040-01-223-8787
Remote Control Lever

012238787
12313394: RNCC: 3 | RNVC: 2
12313394: RNCC: 8 | RNVC: 1

9 Jan 1986

3040-01-222-1837
Counterbalance Weight

012221837
8019131-010: RNCC: 3 | RNVC: 9

7 Dec 1985

3040-01-224-4185
Clutch Drum Tube

012244185
403745: RNCC: 3 | RNVC: 2
403745: RNCC: 5 | RNVC: 9

16 Jan 1986

3040-01-224-8727
Shouldered Shaft

012248727
2664722: RNCC: 3 | RNVC: 2

24 Jan 1986

3040-01-224-6967
Pump Gearshaft

012246967
3500953-1: RNCC: 3 | RNVC: 2

21 Jan 1986

3040-01-225-0468
Hydraulic Accumulator

012250468
81029: RNCC: 3 | RNVC: 2
ACP05AA016EKTD: RNCC: 5 | RNVC: 2
ACP05AA016EKTD: RNCC: 5 | RNVC: 2
ACP05AA016EKTD: RNCC: 5 | RNVC: 2
A2A0010A1E: RNCC: 5 | RNVC: 9
A2A0010A1E: RNCC: 5 | RNVC: 9
A2A0010A1E: RNCC: 5 | RNVC: 9

26 Jan 1986

3040-01-225-7026
Linear Actuating Cylinder Assembly

012257026
AG145306B0: RNCC: 3 | RNVC: 2

6 Feb 1986

3040-01-227-1235
Rigid Connecting Link

012271235
D701184: RNCC: 3 | RNVC: 2

28 Feb 1986

3040-01-227-5883
Rigid Connecting Link

012275883
0329888: RNCC: 3 | RNVC: 9
329888: RNCC: 5 | RNVC: 9
329888: RNCC: 5 | RNVC: 9
0329888: RNCC: 5 | RNVC: 9
0329888: RNCC: 5 | RNVC: 9
329888: RNCC: 5 | RNVC: 9
0329888: RNCC: C | RNVC: 1
329888: RNCC: C | RNVC: 1

6 Mar 1986

3040-01-227-6602
Sheave Deflector

012276602
44300-142: RNCC: 3 | RNVC: 9
44300-142: RNCC: 5 | RNVC: 9

6 Mar 1986

3040-01-228-0308
Shouldered Shaft

012280308
5191110-2: RNCC: 3 | RNVC: 2
5191110-2: RNCC: 5 | RNVC: 1

13 Mar 1986

3040-01-228-4297
Shouldered Shaft

012284297
5433185: RNCC: 3 | RNVC: 2

18 Mar 1986

3040-01-228-3581
Shouldered Shaft

012283581
122-52939-1: RNCC: 3 | RNVC: 2

18 Mar 1986

3040-01-228-5462
Shouldered Shaft

012285462
5544110: RNCC: 3 | RNVC: 2
5544110: RNCC: C | RNVC: 1

18 Mar 1986

3040-01-230-5770
Control Cam

012305770
9377572-1: RNCC: 3 | RNVC: 2

16 Apr 1986

3040-01-230-5769
Control Cam

012305769
9377572-2: RNCC: 3 | RNVC: 2

16 Apr 1986

3040-01-230-9025
Secondary Link

012309025
120-59254: RNCC: 3 | RNVC: 2
120-59254: RNCC: 5 | RNVC: 9

19 Apr 1986

3040-01-231-3609
Remote Control Lever

012313609
3867050-1: RNCC: 3 | RNVC: 2
3867050-1: RNCC: 5 | RNVC: 9

25 Apr 1986

3040-01-231-4147
Linear Actuating Cylinder Piston

012314147
23016568: RNCC: 3 | RNVC: 2
2DA596: RNCC: 5 | RNVC: 2
2DA596: RNCC: 5 | RNVC: 9

26 Apr 1986

3040-01-231-7105
Bevel Gearshaft

012317105
4910377-1: RNCC: 3 | RNVC: 2

2 May 1986

3040-01-232-0574
Shouldered Shaft

012320574
367715-1: RNCC: 3 | RNVC: 2
367715-1: RNCC: 5 | RNVC: 2
367715-1: RNCC: 5 | RNVC: 2
367715-1: RNCC: 5 | RNVC: 9

7 May 1986

3040-01-232-6147
Spur Gearshaft

012326147
367697-2: RNCC: 3 | RNVC: 2
367697-1: RNCC: 5 | RNVC: 9
367697-1: RNCC: 5 | RNVC: 9

17 May 1986

3040-01-234-7812
Shaft Retaining Plate

012347812
3007971: RNCC: 3 | RNVC: 2
3007971: RNCC: 5 | RNVC: 2

19 Jun 1986

3040-01-236-0395
Body Hub

012360395
33476109: RNCC: 3 | RNVC: 2

10 Jul 1986

3040-01-235-5671
Shouldered Shaft

012355671
322941: RNCC: 3 | RNVC: 9
322941: RNCC: 5 | RNVC: 2
322941: RNCC: 5 | RNVC: 9
322941: RNCC: 5 | RNVC: 9

2 Jul 1986

3040-01-236-4504
Spherical Piece

012364504
302 267 00 08: RNCC: 3 | RNVC: 2
302 267 00 08: RNCC: 5 | RNVC: 2
302 267 00 08: RNCC: 5 | RNVC: 9

17 Jul 1986

3040-01-237-0214
Shouldered Shaft

012370214
406 254 00 07: RNCC: 3 | RNVC: 2
406 254 00 07: RNCC: 5 | RNVC: 2
406 254 00 07: RNCC: 5 | RNVC: 9

24 Jul 1986

3040-01-237-3797
Manual Control Lever

012373797
1467AM-31: RNCC: 3 | RNVC: 2
KHS122A: RNCC: 5 | RNVC: 2
1467AM PIECE 31: RNCC: 5 | RNVC: 2

30 Jul 1986

3040-01-237-0472
Remote Control Lever

012370472
419 252 00 13: RNCC: 3 | RNVC: 2
419 252 00 13: RNCC: 5 | RNVC: 2
419 252 00 13: RNCC: 5 | RNVC: 9

24 Jul 1986

3040-01-238-8822
Nonrotating Shaft Eye Bracket

012388822
5429243: RNCC: 3 | RNVC: 2

21 Aug 1986

3040-01-240-0143
Rigid Connecting Link

012400143
68A413026-1001: RNCC: 3 | RNVC: 2

7 Sep 1986

3040-01-240-8566
Manual Control Lever

012408566
17500-040: RNCC: 3 | RNVC: 2

19 Sep 1986

3040-01-241-6875
Shaft Retaining Plate

012416875
417606: RNCC: 3 | RNVC: 2
417606: RNCC: 5 | RNVC: 9

30 Sep 1986

3040-01-242-3086
Remote Control Lever

012423086
000 824 44 10: RNCC: 3 | RNVC: 2
101.454: RNCC: 5 | RNVC: 2
000 824 44 10: RNCC: 5 | RNVC: 2
000 824 44 10: RNCC: 5 | RNVC: 9

9 Oct 1986

3040-01-242-4594
Hub Clamp

012424594
419 553 74 13: RNCC: 3 | RNVC: 2

12 Oct 1986

3040-01-242-7940
Spur Gearshaft

012427940
801340: RNCC: 3 | RNVC: 2
742359: RNCC: E | RNVC: 8

17 Oct 1986

3040-01-243-1471
Linear Actuating Cylinder Assembly

012431471
1417090: RNCC: 3 | RNVC: 2
331255: RNCC: 5 | RNVC: 2
FMN11C,P1-60: RNCC: 5 | RNVC: 9
1417090: RNCC: 5 | RNVC: 9

23 Oct 1986

3040-01-243-4728
Worm Shaft

012434728
K2005-1 PIECE 75: RNCC: 3 | RNVC: 2
K2005-1 PIECE 75: RNCC: 5 | RNVC: 9
2K75U: RNCC: C | RNVC: 1

28 Oct 1986

3040-01-241-4900
Gland Assembly

012414900
1543118C1: RNCC: 3 | RNVC: 2
G104268: RNCC: 5 | RNVC: 9
G104268: RNCC: 5 | RNVC: 9

26 Sep 1986

3040-01-244-3099
Mechanical Drive Housing

012443099
SK-3806-24A: RNCC: 3 | RNVC: 2
SK-3806-24: RNCC: 5 | RNVC: 9

9 Nov 1986

3040-01-241-4810
Ball Joint

012414810
A002 330 15 35: RNCC: 3 | RNVC: 2
001 330 01 35: RNCC: 5 | RNVC: 2
001 330 01 35: RNCC: 5 | RNVC: 9
000 463 35 29: RNCC: 5 | RNVC: 9
001 330 01 35: RNCC: 5 | RNVC: 9
000 463 35 29: RNCC: 5 | RNVC: 9

26 Sep 1986

3040-01-245-3319
Bell Crank

012453319
65-20959-5: RNCC: 3 | RNVC: 2
65-20959-5: RNCC: 5 | RNVC: 9

26 Nov 1986

3040-01-245-5134
Lower Shaft

012455134
22270-1: RNCC: 3 | RNVC: 2
3040PL0639026: RNCC: 6 | RNVC: 9
22270-1: RNCC: C | RNVC: 1

30 Nov 1986

3040-01-245-9210
Remote Control Lever

012459210
B2365-1: RNCC: 3 | RNVC: 2
D9305 ITEM 11: RNCC: 5 | RNVC: 2
D9305: RNCC: D | RNVC: 9

6 Dec 1986

3040-01-246-1636
Multiple Gears Gearshaft

012461636
742809: RNCC: 3 | RNVC: 2

10 Dec 1986

3040-01-248-4739
Bell Crank

012484739
68A451005-1005: RNCC: 3 | RNVC: 2

23 Jan 1987

3040-01-248-5046
Brake Drum

012485046
2B1-225-1: RNCC: 3 | RNVC: 2
1189572-1: RNCC: 5 | RNVC: 9

24 Jan 1987

3040-01-248-5219
Control Cam

012485219
B525F056: RNCC: 3 | RNVC: 2

24 Jan 1987

3040-01-249-1511
Remote Control Lever

012491511
12349793: RNCC: 3 | RNVC: 2
12349793: RNCC: 3 | RNVC: 2
12349793: RNCC: 5 | RNVC: 2
12349793: RNCC: 8 | RNVC: 1

6 Feb 1987

3040-01-249-3586
Shouldered Shaft

012493586
656C0497G024A: RNCC: 3 | RNVC: 2

11 Feb 1987

3040-01-250-4690
Push-Pull Control Assembly

012504690
000-35757-0001: RNCC: 3 | RNVC: 2
35757: RNCC: 3 | RNVC: 2
10519444: RNCC: 5 | RNVC: 2

1 Mar 1987

3040-01-251-5312
Remote Control Lever

012515312
12268270: RNCC: 3 | RNVC: 2

19 Mar 1987

3040-01-251-8895
Mechanical Drive Housing

012518895
102655DF: RNCC: 3 | RNVC: 2

25 Mar 1987

3040-01-200-4355
Spur Gearshaft

012004355
1311024-293: RNCC: 3 | RNVC: 2

4 Feb 1985

3040-01-200-8109
Linear Actuating Cylinder Piston

012008109
6-701-000236: RNCC: 3 | RNVC: 2
2CD687: RNCC: 5 | RNVC: 2
2CD687: RNCC: 5 | RNVC: 9

9 Feb 1985

3040-01-222-1831
Counterbalance Weight

012221831
8019131-004: RNCC: 3 | RNVC: 9

7 Dec 1985

3040-01-222-1832
Counterbalance Weight

012221832
8019131-005: RNCC: 3 | RNVC: 9

7 Dec 1985

3040-01-223-8797
Rigid Connecting Link

012238797
12313450: RNCC: 3 | RNVC: 2
12313450: RNCC: 5 | RNVC: 9
12313450: RNCC: 8 | RNVC: 1

9 Jan 1986

3040-01-246-7673
Spur Gearshaft

012467673
1395AS213-2: RNCC: 3 | RNVC: 2
1395AS213-2: RNCC: 5 | RNVC: 9

18 Dec 1986

3040-01-248-3726
Remote Control Lever

012483726
8-017-703-03: RNCC: 3 | RNVC: 2
8-017-703-3: RNCC: 5 | RNVC: 9

23 Jan 1987

3040-01-186-1668
Manual Control Lever

011861668
3081412-2: RNCC: 3 | RNVC: 2

8 Aug 1984

3040-01-186-7888
Rigid Connecting Link

011867888
12315484-3: RNCC: 3 | RNVC: 2

15 Aug 1984

3040-01-186-1568
Shaft Assembly

011861568
2048098-4-1: RNCC: 3 | RNVC: 2
2048098-4-1: RNCC: 5 | RNVC: 9
10424558: RNCC: 6 | RNVC: 9

8 Aug 1984

3040-01-187-8233
Counterbalance Weight

011878233
301-510-004-0: RNCC: 3 | RNVC: 2
301-510-004-0: RNCC: 5 | RNVC: 2

25 Aug 1984

3040-01-187-9016
Straight Shaft

011879016
BYLB399: RNCC: 3 | RNVC: 2

27 Aug 1984

3040-01-188-6521
Shouldered Shaft

011886521
1534AS431: RNCC: 3 | RNVC: 2
1534AS431: RNCC: 5 | RNVC: 2
1534AS431: RNCC: 5 | RNVC: 2
1534AS431: RNCC: 5 | RNVC: 2
1534AS431: RNCC: 5 | RNVC: 2
1534AS431: RNCC: 5 | RNVC: 2
D014189-501: RNCC: 5 | RNVC: 9
1534AS431: RNCC: 5 | RNVC: 9
D014189-501: RNCC: 5 | RNVC: 9
10104454: RNCC: 6 | RNVC: 9

7 Sep 1984

3040-01-189-2591
Mechanical Drive Housing

011892591
301-295-106-0: RNCC: 3 | RNVC: 2
301-295-106-0: RNCC: 5 | RNVC: 9

13 Sep 1984

3040-01-189-3254
Shaft Collar

011893254
75A326561-2001: RNCC: 3 | RNVC: 9
75A326561-2001: RNCC: 5 | RNVC: 2
75A326561-2001: RNCC: C | RNVC: 1
75A326561: RNCC: D | RNVC: 9

14 Sep 1984

3040-01-189-7151
Remote Control Lever

011897151
A8241-063-82340-216: RNCC: 3 | RNVC: 2
375509: RNCC: 3 | RNVC: 2
9988-780 REV B PC 186: RNCC: 5 | RNVC: 2

20 Sep 1984

3040-01-189-6634
Rigid Connecting Link

011896634
123L40019-601: RNCC: 3 | RNVC: 2
123L40019-601: RNCC: 5 | RNVC: 2
123L40019-601: RNCC: 5 | RNVC: 9
123L40019: RNCC: D | RNVC: 9

18 Sep 1984

3040-01-190-1118
Ball Joint

011901118
A-107: RNCC: 3 | RNVC: 9
A1002: RNCC: 5 | RNVC: 2
59-150: RNCC: 5 | RNVC: 9

23 Sep 1984

3040-01-190-0203
Remote Control Lever

011900203
5382-009: RNCC: 3 | RNVC: 2
9988-780 ITEM 27: RNCC: 5 | RNVC: 2

22 Sep 1984

3040-01-191-4051
Extension Shaft

011914051
16300911: RNCC: 3 | RNVC: 2
16300911: RNCC: 3 | RNVC: 9
16604819 PIECE 47: RNCC: 5 | RNVC: 9

7 Oct 1984

3040-01-191-8369
Straight Shaft

011918369
5041-370: RNCC: 3 | RNVC: 2
57402: RNCC: 5 | RNVC: 2
3040PL0947568: RNCC: 6 | RNVC: 9
B57402C: RNCC: D | RNVC: 9

12 Oct 1984

3040-01-191-8791
Shouldered Shaft

011918791
7566644-011: RNCC: 3 | RNVC: 2
7566644-011: RNCC: 5 | RNVC: 2

13 Oct 1984

3040-01-192-5665
Shaft Collar

011925665
299891: RNCC: 3 | RNVC: 2
1173620C1: RNCC: 5 | RNVC: 9
299891: RNCC: 5 | RNVC: 9

23 Oct 1984

3040-01-192-9794
Remote Control Lever

011929794
75D111178-2001: RNCC: 3 | RNVC: 2
75D111178-2001: RNCC: 5 | RNVC: 2
75D111178-2001: RNCC: 5 | RNVC: 9
75D111178: RNCC: D | RNVC: 9

28 Oct 1984

3040-01-193-1844
Straight Shaft

011931844
6-768-001651: RNCC: 3 | RNVC: 2
2CD712: RNCC: 5 | RNVC: 2
2CD712: RNCC: 5 | RNVC: 9

31 Oct 1984

3040-01-193-4637
Rigid Connecting Link

011934637
2322475-3: RNCC: 3 | RNVC: 9
2322475-3: RNCC: C | RNVC: 1
DRP-16101 PC 10: RNCC: C | RNVC: 1

3 Nov 1984

3040-01-195-9305
Rigid Connecting Link

011959305
75A440527-1001: RNCC: 3 | RNVC: 2

4 Dec 1984

3040-01-196-4923
Rigid Connecting Link

011964923
12329218-3: RNCC: 3 | RNVC: 2
10085876: RNCC: 6 | RNVC: 9

12 Dec 1984

3040-01-196-7510
Linear Actuating Cylinder Assembly Parts Kit

011967510
A47531-1: RNCC: 3 | RNVC: 2
A-47531: RNCC: D | RNVC: 9

14 Dec 1984

3040-01-196-4921
Rigid Connecting Link

011964921
12329218-1: RNCC: 3 | RNVC: 2
10085874: RNCC: 6 | RNVC: 9

12 Dec 1984

3040-01-196-7507
Shouldered Shaft

011967507
325506-0-01: RNCC: 3 | RNVC: 2
325506-0-01: RNCC: 3 | RNVC: 9
325506001: RNCC: 5 | RNVC: 9
2254-4 ITEM 59: RNCC: 5 | RNVC: 9

14 Dec 1984

3040-01-197-5481
Rigid Connecting Link

011975481
12336598: RNCC: 3 | RNVC: 2

22 Dec 1984

3040-01-197-8585
Spur Gearshaft

011978585
S13-43968: RNCC: 3 | RNVC: 2
33A029663: RNCC: 5 | RNVC: 9

29 Dec 1984

3040-01-199-7945
Straight Shaft

011997945
6-810-001901: RNCC: 3 | RNVC: 2
2CD724: RNCC: 5 | RNVC: 2
2CD724: RNCC: 5 | RNVC: 9

25 Jan 1985

3040-01-200-4222
Shouldered Shaft

012004222
SS800R-K8: RNCC: 3 | RNVC: 2
SS800R-K8: RNCC: 3 | RNVC: 9
SS800R-K8: RNCC: 5 | RNVC: 9
SS800R-K8: RNCC: C | RNVC: 1
SS800R-8: RNCC: C | RNVC: 1

4 Feb 1985

3040-01-200-3484
Straight Shaft

012003484
9300-211: RNCC: 3 | RNVC: 2

3 Feb 1985

3040-01-200-5148
Shouldered Shaft

012005148
36B510958G1: RNCC: 3 | RNVC: 2
36B510958G1: RNCC: 5 | RNVC: 9

5 Feb 1985

3040-01-200-8943
Counterbalance Weight

012008943
8049969-006: RNCC: 3 | RNVC: 2
X8049969-006: RNCC: 5 | RNVC: 9
8049969-006: RNCC: 5 | RNVC: 9

10 Feb 1985

3040-01-200-6454
Remote Control Lever

012006454
751925-2: RNCC: 3 | RNVC: 2

7 Feb 1985

3040-01-201-1145
Remote Control Lever

012011145
13214E2397: RNCC: 3 | RNVC: 2

12 Feb 1985

3040-01-201-1146
Manual Control Lever

012011146
13214E2924: RNCC: 3 | RNVC: 2

12 Feb 1985

3040-01-201-6171
Linear Actuating Cylinder

012016171
PDG7834: RNCC: 3 | RNVC: 2
PDG7834: RNCC: 5 | RNVC: 9
10106974: RNCC: 6 | RNVC: 9

20 Feb 1985

3040-01-201-9595
Shouldered Shaft

012019595
A02R2851-9: RNCC: 3 | RNVC: 2

26 Feb 1985

3040-01-202-5126
Shouldered Shaft

012025126
9300-103: RNCC: 3 | RNVC: 2

3 Mar 1985

3040-01-202-6492
Counterbalance Weight

012026492
8050049-003: RNCC: 3 | RNVC: 9
X8050049-003: RNCC: 5 | RNVC: 9

5 Mar 1985

3040-01-203-4243
Linear Actuating Cylinder Cap

012034243
309 2798: RNCC: 3 | RNVC: 2
348 6974: RNCC: D | RNVC: 9

14 Mar 1985

3040-01-204-0601
Shouldered Shaft

012040601
7360-16: RNCC: 3 | RNVC: 2
C-7360-16: RNCC: 3 | RNVC: 2
9-632-100929: RNCC: 5 | RNVC: 2
2CK155: RNCC: 5 | RNVC: 2
9-632-100929: RNCC: 5 | RNVC: 2
9-632-100929: RNCC: 5 | RNVC: 2
2CK155: RNCC: 5 | RNVC: 9

22 Mar 1985

3040-01-203-7518
Shouldered Shaft

012037518
10524601: RNCC: 3 | RNVC: 2
544 2648: RNCC: 5 | RNVC: 2
996 0945: RNCC: 5 | RNVC: 9

19 Mar 1985

3040-01-205-1282
Control Cam

012051282
3035-346: RNCC: 3 | RNVC: 2

4 Apr 1985

3040-01-207-3583
Shouldered Shaft

012073583
27037: RNCC: 3 | RNVC: 2
27037: RNCC: 3 | RNVC: 9

1 May 1985

3040-01-207-8503
Nonrotating Shaft Eye Bracket

012078503
9C00409-1: RNCC: 3 | RNVC: 2
9C00409-2: RNCC: 3 | RNVC: 2
517049-2: RNCC: 3 | RNVC: 2
517049-2: RNCC: 5 | RNVC: 9
517049-2: RNCC: 5 | RNVC: 9

6 May 1985

3040-01-207-9632
Shouldered Shaft

012079632
101B340AB-1: RNCC: 3 | RNVC: 2
101B340AB-1: RNCC: 3 | RNVC: 9
3283594: RNCC: 5 | RNVC: 9
101B340AB PT 1: RNCC: 5 | RNVC: 9
101B340ABP1: RNCC: 5 | RNVC: 9
101B340AB-1: RNCC: 5 | RNVC: 9
101B340AB-1: RNCC: C | RNVC: 1
101B340AB: RNCC: D | RNVC: 9

8 May 1985

3040-01-208-1699
Differential Gear Unit

012081699
2794154-1: RNCC: 3 | RNVC: 2

10 May 1985

3040-01-208-7103
Shouldered Shaft

012087103
5196169: RNCC: 3 | RNVC: 2

17 May 1985

3040-01-209-2311
Straight Shaft

012092311
3179-019: RNCC: 3 | RNVC: 2
9988-741 ITEM 8.61: RNCC: 5 | RNVC: 2
9988-741: RNCC: D | RNVC: 9

25 May 1985

3040-01-210-9622
Hub Clamp

012109622
C539-13: RNCC: 3 | RNVC: 2
S3244YR0004: RNCC: 5 | RNVC: 2
3040PL0667669: RNCC: 6 | RNVC: 9
3040PL1874936: RNCC: 6 | RNVC: 9
C539: RNCC: 7 | RNVC: 1

20 Jun 1985

3040-01-210-3775
Straight Shaft

012103775
9376872: RNCC: 3 | RNVC: 2

12 Jun 1985

3040-01-211-2788
Key End Drive Shaft

012112788
272088-001: RNCC: 3 | RNVC: 2
272088-001: RNCC: 5 | RNVC: 9
272088-001: RNCC: 5 | RNVC: 9
JB1MODEL758: RNCC: 5 | RNVC: 9
M272088-001: RNCC: 5 | RNVC: 9
272088-001: RNCC: 5 | RNVC: 9

24 Jun 1985

3040-01-213-2337
Bell Crank

012132337
128LM10259-601: RNCC: 3 | RNVC: 2
128LM10259-601: RNCC: 3 | RNVC: 9
128LM10259-601: RNCC: 5 | RNVC: 9

24 Jul 1985

3040-01-214-3184
Linear Actuating Cylinder Cap

012143184
23017952: RNCC: 3 | RNVC: 2
23017952: RNCC: 8 | RNVC: 2

8 Aug 1985

3040-01-214-3916
Spur Gearshaft

012143916
23046121: RNCC: 3 | RNVC: 2
23018294: RNCC: 5 | RNVC: 9

9 Aug 1985

3040-01-215-9674
Shouldered Shaft

012159674
387-3577: RNCC: 3 | RNVC: 2
387-3577: RNCC: 5 | RNVC: 9
387-3577: RNCC: 7 | RNVC: 2
387-3577: RNCC: C | RNVC: 1

4 Sep 1985

3040-01-215-8634
Control Cable Assembly

012158634
580-530-006: RNCC: 3 | RNVC: 2

1 Sep 1985

3040-01-216-2657
Spur Gearshaft

012162657
2642-343-13 ITEM 5: RNCC: 3 | RNVC: 2
845-5765823-0005: RNCC: 3 | RNVC: 2
845-5765824-0005: RNCC: 3 | RNVC: 2
2642-343-13 ITEM 5: RNCC: 5 | RNVC: 9
5765824-0005: RNCC: C | RNVC: 1
2642-343-12: RNCC: D | RNVC: 9
2642-343-13: RNCC: D | RNVC: 9
845-5765824: RNCC: D | RNVC: 9
845-5765823: RNCC: D | RNVC: 9

7 Sep 1985

3040-01-216-3395
Manual Control Lever

012163395
27859L: RNCC: 3 | RNVC: 2

8 Sep 1985

3040-01-217-2707
Spur Gearshaft

012172707
8433: RNCC: 3 | RNVC: 2
8433: RNCC: 5 | RNVC: 2
8433: RNCC: 5 | RNVC: 2

23 Sep 1985

3040-01-218-6707
Hub Clamp

012186707
1134749C1: RNCC: 3 | RNVC: 2
1134749C1: RNCC: 3 | RNVC: 9
1134749C1: RNCC: 5 | RNVC: 2

17 Oct 1985

3040-01-218-8636
Shouldered Shaft

012188636
402720: RNCC: 3 | RNVC: 2

20 Oct 1985

3040-01-219-1532
Counterbalance Weight

012191532
8019129-004: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-1534
Counterbalance Weight

012191534
8019129-006: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-1553
Counterbalance Weight

012191553
8019129-025: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-1554
Counterbalance Weight

012191554
8019129-026: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-6633
Control Cam

012196633
MD31623-3224: RNCC: 3 | RNVC: 9
MD31623-3224: RNCC: 5 | RNVC: 2
MD31623-3224 A3: RNCC: 5 | RNVC: 9
MD31623-3224 A1: RNCC: 5 | RNVC: 9
MD31623-3224: RNCC: 5 | RNVC: 9
MD31623-3224 A1: RNCC: 5 | RNVC: 9
MD31623-3224 A3: RNCC: 5 | RNVC: 9
MD31623-3224: RNCC: 5 | RNVC: 9
MD31623-3224: RNCC: D | RNVC: 9

31 Oct 1985

3040-01-221-5461
Remote Control Lever

012215461
24-6206-7: RNCC: 3 | RNVC: 2
24-5798-7: RNCC: 5 | RNVC: 9

29 Nov 1985

3040-01-221-3205
Shaft Assembly

012213205
1505700W: RNCC: 3 | RNVC: 2
1505700: RNCC: 5 | RNVC: 9
1505700W: RNCC: 5 | RNVC: 9

27 Nov 1985

3040-01-221-9329
Counterbalance Weight

012219329
8019131-041: RNCC: 3 | RNVC: 9

5 Dec 1985

3040-01-222-0392
Remote Control Lever

012220392
2247H1256: RNCC: 3 | RNVC: 2
2247H1256: RNCC: 5 | RNVC: 2
372D290: RNCC: 5 | RNVC: 9
372-D-290: RNCC: 5 | RNVC: 9

6 Dec 1985

3040-01-222-0663
Rigid Connecting Link

012220663
2670666: RNCC: 3 | RNVC: 2

6 Dec 1985

3040-01-222-0791
Rigid Connecting Link

012220791
711599-K01: RNCC: 3 | RNVC: 2

6 Dec 1985

3040-01-222-1843
Counterbalance Weight

012221843
8019131-016: RNCC: 3 | RNVC: 9

7 Dec 1985

3040-01-222-2855
Ball Joint

012222855
227210: RNCC: 3 | RNVC: 2
227210: RNCC: 5 | RNVC: 9

10 Dec 1985

3040-01-222-8134
Spur Gearshaft

012228134
460-224-001: RNCC: 3 | RNVC: 2
460-224-001: RNCC: 5 | RNVC: 1

18 Dec 1985

3040-01-224-1114
Remote Control Lever

012241114
2669840: RNCC: 3 | RNVC: 2

12 Jan 1986

3040-01-224-7985
Rigid Connecting Link

012247985
4KK517: RNCC: 3 | RNVC: 2
340 3785: RNCC: 5 | RNVC: 2
9803-13 FIGURE 59: RNCC: 5 | RNVC: 2
9803-13/59: RNCC: 5 | RNVC: 2
340 3785: RNCC: 5 | RNVC: 2
4KK517: RNCC: 5 | RNVC: 9
9803-13/59: RNCC: 5 | RNVC: 9
340 3785: RNCC: 5 | RNVC: 9
9803-13 FIGURE 59: RNCC: 5 | RNVC: 9
10398151: RNCC: 6 | RNVC: 9

23 Jan 1986

3040-01-224-8860
Control Cam

012248860
2673206: RNCC: 3 | RNVC: 2

24 Jan 1986

3040-01-225-6138
Shouldered Shaft

012256138
82389-7: RNCC: 3 | RNVC: 9
10043 PIECE 7: RNCC: 5 | RNVC: 9
10043: RNCC: D | RNVC: 9

5 Feb 1986

3040-01-227-1232
Remote Control Lever

012271232
16-01-049-006: RNCC: 3 | RNVC: 2
2CX243: RNCC: 5 | RNVC: 2
2CX243: RNCC: 5 | RNVC: 9

28 Feb 1986

3040-01-227-2303
Shaft Collar

012272303
6086044: RNCC: 3 | RNVC: 2

1 Mar 1986

3040-01-227-4685
Shouldered Shaft

012274685
1386570: RNCC: 3 | RNVC: 2
1386570: RNCC: 5 | RNVC: 9

3 Mar 1986

3040-01-227-4720
Linear Actuating Cylinder Piston Rod

012274720
9HR889: RNCC: 3 | RNVC: 2
RNT26C: RNCC: 3 | RNVC: 9
EQ2604: RNCC: 5 | RNVC: 2
EQ2604: RNCC: 5 | RNVC: 2
EQ2604: RNCC: 5 | RNVC: 2
RNT26C: RNCC: 5 | RNVC: 9
2CC268: RNCC: 5 | RNVC: 9
9HR889: RNCC: 5 | RNVC: 9

3 Mar 1986

3040-01-227-8754
Shouldered Shaft

012278754
863T0410433-003: RNCC: 3 | RNVC: 9
863T0410433-001: RNCC: 5 | RNVC: 9

12 Mar 1986

3040-01-228-5461
Shouldered Shaft

012285461
5544109: RNCC: 3 | RNVC: 2
5544109: RNCC: 5 | RNVC: 2

18 Mar 1986

3040-01-228-7315
Linear Actuating Cylinder Piston

012287315
TR0530: RNCC: 3 | RNVC: 2

20 Mar 1986

3040-01-231-2975
Linear Actuating Cylinder Assembly

012312975
1H2H0A00279192: RNCC: 3 | RNVC: 2
AG14614E0: RNCC: 5 | RNVC: 9
2.50CC-2HLTVS34CX87.000: RNCC: 5 | RNVC: 9
2.50CC-2HLTVS34ACX87.000: RNCC: 5 | RNVC: 9
AG146145E0: RNCC: 5 | RNVC: 9

25 Apr 1986

3040-01-231-9297
Pawl

012319297
12343929: RNCC: 3 | RNVC: 2

6 May 1986

3040-01-232-2457
Shaft Collar

012322457
303528: RNCC: 3 | RNVC: 2
303528: RNCC: 5 | RNVC: 9
8D-6605 PIECE 12: RNCC: 5 | RNVC: 9
8D-6605: RNCC: D | RNVC: 9

9 May 1986

3040-01-232-0576
Shouldered Shaft

012320576
367704-2: RNCC: 3 | RNVC: 2
367704-1: RNCC: 5 | RNVC: 9
367704-2: RNCC: 5 | RNVC: 9

7 May 1986

3040-01-234-1838
Linear Actuating Cylinder Assembly

012341838
AG146148B0: RNCC: 3 | RNVC: 2

10 Jun 1986

3040-01-235-1952
Shouldered Shaft

012351952
9361025: RNCC: 3 | RNVC: 2

26 Jun 1986

3040-01-235-7951
Bevel Gearshaft

012357951
6061T01P01: RNCC: 3 | RNVC: 2

6 Jul 1986

3040-01-236-4717
Mechanical Drive Housing

012364717
3164464-4: RNCC: 3 | RNVC: 2

17 Jul 1986

3040-01-237-0474
Remote Control Lever

012370474
406 260 46 39: RNCC: 3 | RNVC: 2
406 260 46 39: RNCC: 5 | RNVC: 2
406 260 46 39: RNCC: 5 | RNVC: 9

24 Jul 1986

3040-01-237-1841
Linear Actuating Cylinder Piston Rod

012371841
TG82AK9684: RNCC: 3 | RNVC: 2

26 Jul 1986

3040-01-237-2261
Manual Control Lever

012372261
A02S8081-2: RNCC: 3 | RNVC: 2

26 Jul 1986

3040-01-237-6148
Linear Actuating Cylinder Assembly

012376148
AG146145C0: RNCC: 3 | RNVC: 2

3 Aug 1986

3040-01-238-3884
Drive Shaft Head

012383884
711349-A: RNCC: 3 | RNVC: 2

14 Aug 1986

3040-01-240-3086
Linear Actuating Cylinder Assembly Parts Kit

012403086
9C03053: RNCC: 3 | RNVC: 2

12 Sep 1986

3040-01-240-0066
Manual Control Lever

012400066
31118-1: RNCC: 3 | RNVC: 2

7 Sep 1986

3040-01-241-8688
Linear Actuating Cylinder Piston

012418688
71-35: RNCC: 3 | RNVC: 9
71-35: RNCC: 5 | RNVC: 9
3040PL0811234: RNCC: 6 | RNVC: 9

3 Oct 1986

3040-01-241-7457
Connectin Tube Assy

012417457
206-001-189-3: RNCC: 3 | RNVC: 2

1 Oct 1986

3040-01-242-2930
Shaft Collar

012422930
3A001-1871: RNCC: 3 | RNVC: 2
3A001-1871: RNCC: 5 | RNVC: 2

9 Oct 1986

3040-01-243-5248
Control Cam

012435248
9377104: RNCC: 3 | RNVC: 2

28 Oct 1986

3040-01-241-4812
Pawl

012414812
120 427 01 15: RNCC: 3 | RNVC: 2
120 427 01 15: RNCC: 5 | RNVC: 9
120 427 01 15: RNCC: C | RNVC: 1

26 Sep 1986

3040-01-245-1356
Shouldered Shaft

012451356
610531-63-A: RNCC: 3 | RNVC: 2
610531-63-A: RNCC: 3 | RNVC: 9

23 Nov 1986

3040-01-245-7320
Upper Shaft

012457320
22269-1: RNCC: 3 | RNVC: 2
3040PL0639024: RNCC: 6 | RNVC: 9
22269-1: RNCC: C | RNVC: 1

3 Dec 1986

3040-01-246-1635
Spur Gearshaft

012461635
742829: RNCC: 3 | RNVC: 2

10 Dec 1986

3040-01-246-1521
Shouldered Shaft

012461521
742830: RNCC: 3 | RNVC: 2

10 Dec 1986

3040-01-246-5172
Shouldered Shaft

012465172
A-18545TY5: RNCC: 3 | RNVC: 2

13 Dec 1986

3040-01-246-1637
Multiple Gears Gearshaft

012461637
742807: RNCC: 3 | RNVC: 2

10 Dec 1986

3040-01-247-4526
Brake Backing Plate

012474526
0745-1006: RNCC: 3 | RNVC: 2

6 Jan 1987

3040-01-248-1520
Mechanical Drive Housing

012481520
9805: RNCC: 3 | RNVC: 2
XA7297C: RNCC: 5 | RNVC: 9

16 Jan 1987

3040-01-248-3887
Shouldered Shaft

012483887
610535-49-R: RNCC: 3 | RNVC: 9
610535-49-R: RNCC: C | RNVC: 1

23 Jan 1987

3040-01-248-3884
Shouldered Shaft

012483884
609140-1-RA: RNCC: 3 | RNVC: 2
609140-1-RA: RNCC: 3 | RNVC: 9

23 Jan 1987

3040-01-248-6712
Rigid Connecting Link

012486712
12349963: RNCC: 3 | RNVC: 2
12349963: RNCC: 5 | RNVC: 2
12349963: RNCC: 5 | RNVC: 2
12349963: RNCC: 8 | RNVC: 1

28 Jan 1987

3040-01-249-8597
Nonrotating Shaft Eye Bracket

012498597
419 995 70 48: RNCC: 3 | RNVC: 2
419 995 7048: RNCC: 5 | RNVC: 2
419 995 7048: RNCC: 5 | RNVC: 9

19 Feb 1987

3040-01-249-4124
Mechanical Drive Housing

012494124
223-4574: RNCC: 3 | RNVC: 2
415-2510: RNCC: 5 | RNVC: 2
223 4574: RNCC: 5 | RNVC: 9

11 Feb 1987

3040-01-250-9844
Control Cam

012509844
12101003-9: RNCC: 3 | RNVC: 9
12101003-9: RNCC: 5 | RNVC: 2
12101003-9: RNCC: 5 | RNVC: 9
3040PL0891051: RNCC: 6 | RNVC: 9

10 Mar 1987

3040-01-251-1110
Control Cam

012511110
315B144-5: RNCC: 3 | RNVC: 2
315B144-5: RNCC: 5 | RNVC: 9

12 Mar 1987

3040-01-186-3602
Linear Actuating Cylinder Assembly Parts Kit

011863602
553861: RNCC: 3 | RNVC: 2
MD1700162: RNCC: 5 | RNVC: 9

10 Aug 1984

3040-01-186-8004
Bell Crank

011868004
12332097-3: RNCC: 3 | RNVC: 2
13211E9409: RNCC: 5 | RNVC: 9

15 Aug 1984

3040-01-186-6627
Rigid Connecting Link

011866627
123C40209-603: RNCC: 3 | RNVC: 2
123C40209-603: RNCC: 5 | RNVC: 9

12 Aug 1984

3040-01-186-8003
Bell Crank

011868003
12332331: RNCC: 3 | RNVC: 2
13204E3686: RNCC: 5 | RNVC: 9

15 Aug 1984

3040-01-187-2104
Shouldered Shaft

011872104
245421: RNCC: 3 | RNVC: 2
245421: RNCC: 5 | RNVC: 9

21 Aug 1984

3040-01-188-3243
Fuel Injector Cam Ring

011883243
27833: RNCC: 3 | RNVC: 2
5740587: RNCC: 5 | RNVC: 2
23119: RNCC: 5 | RNVC: 9

1 Sep 1984

3040-01-188-3242
Cam Roller Shoe

011883242
24569: RNCC: 3 | RNVC: 2
5740586: RNCC: 5 | RNVC: 2
3040011883242: RNCC: 6 | RNVC: 9

1 Sep 1984

3040-01-189-6601
Shaft Collar

011896601
75A326554-2001: RNCC: 3 | RNVC: 9
75A326554-2001: RNCC: 5 | RNVC: 2
75A326554-2001: RNCC: C | RNVC: 1
75A326554: RNCC: D | RNVC: 9

18 Sep 1984

3040-01-190-1120
Rigid Connecting Link

011901120
75A500811-1001: RNCC: 3 | RNVC: 2
75A500811: RNCC: D | RNVC: 9

23 Sep 1984

3040-01-189-8962
Ball Joint

011898962
7-364-000020: RNCC: 3 | RNVC: 2
SPG1002: RNCC: 5 | RNVC: 9

20 Sep 1984

3040-01-190-3845
Rigid Connecting Link

011903845
7514-6003: RNCC: 3 | RNVC: 2
LE162-0002-6003: RNCC: 5 | RNVC: 2
7014-91: RNCC: 5 | RNVC: 2
SR10784A-6003: RNCC: 5 | RNVC: 9
LE162-0002-: RNCC: D | RNVC: 9

26 Sep 1984

3040-01-191-4338
Bevel Gearshaft

011914338
2042121-1: RNCC: 3 | RNVC: 2
2042121-1: RNCC: 5 | RNVC: 9
10106969: RNCC: 6 | RNVC: 9
2042121: RNCC: D | RNVC: 9

7 Oct 1984

3040-01-191-5681
Counterbalance Weight

011915681
952B928-2: RNCC: 3 | RNVC: 2
952B928-2: RNCC: 5 | RNVC: 9

10 Oct 1984

3040-01-191-6683
Spur Gearshaft

011916683
3084238-1: RNCC: 3 | RNVC: 2
3084238: RNCC: D | RNVC: 9

11 Oct 1984

3040-01-191-8905
Multiple Gears Gearshaft

011918905
2042100-1: RNCC: 3 | RNVC: 2
2042100-1: RNCC: 5 | RNVC: 2
2042100-1: RNCC: 5 | RNVC: 2
2042100-1: RNCC: 5 | RNVC: 9
10106972: RNCC: 6 | RNVC: 9
2042100: RNCC: D | RNVC: 9

13 Oct 1984

3040-01-192-1632
Straight Shaft

011921632
12338536: RNCC: 3 | RNVC: 2
5588703: RNCC: 3 | RNVC: 2
12338536: RNCC: 3 | RNVC: 2
5575774: RNCC: 5 | RNVC: 9
558703: RNCC: 5 | RNVC: 9
5593988: RNCC: 5 | RNVC: 9
5575775: RNCC: C | RNVC: 1

17 Oct 1984

3040-01-192-3593
Accumulator Cap

011923593
21437: RNCC: 3 | RNVC: 2
110-25810 ITEM 9: RNCC: 5 | RNVC: 2
110-25810: RNCC: D | RNVC: 9

19 Oct 1984

3040-01-192-8356
Manual Control Lever

011928356
12300745: RNCC: 3 | RNVC: 2

26 Oct 1984

3040-01-192-8837
Linear Actuating Cylinder Piston

011928837
6-701-000230: RNCC: 3 | RNVC: 2
2CD685: RNCC: 5 | RNVC: 2
2CD685: RNCC: 5 | RNVC: 9

26 Oct 1984

3040-01-192-7388
Shouldered Shaft

011927388
3620156-1: RNCC: 3 | RNVC: 2
SS-3620156-1: RNCC: 5 | RNVC: 2

25 Oct 1984

3040-01-194-7957
Straight Shaft

011947957
1372B216: RNCC: 3 | RNVC: 2

17 Nov 1984

3040-01-195-1138
Spur Gearshaft

011951138
46-0161-1: RNCC: 3 | RNVC: 2

22 Nov 1984

3040-01-195-4442
Remote Control Lever

011954442
S4127 PIECE 82: RNCC: 3 | RNVC: 2
S4127 PART 82: RNCC: C | RNVC: 1
S-4127: RNCC: D | RNVC: 9

29 Nov 1984

3040-01-195-5744
Shouldered Shaft

011955744
5N2582: RNCC: 3 | RNVC: 2

30 Nov 1984

Load More Results