What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 122 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 122 of 300

3040-01-273-5613
Shouldered Shaft

012735613
6346: RNCC: 3 | RNVC: 2
2607DG5G02: RNCC: 5 | RNVC: 2

26 Feb 1988

3040-01-273-5675
Manual Control Lever

012735675
865 1574: RNCC: 3 | RNVC: 2

26 Feb 1988

3040-01-273-5906
Rigid Connecting Link

012735906
405-10129-503: RNCC: 3 | RNVC: 2

27 Feb 1988

3040-01-274-9290
Shouldered Shaft

012749290
60-311-0008-2: RNCC: 3 | RNVC: 2
01-435-0352-4 PIECEE 80: RNCC: 5 | RNVC: 2

16 Mar 1988

3040-01-275-1722
Linear Actuating Cylinder Piston

012751722
9260262: RNCC: 3 | RNVC: 9

18 Mar 1988

3040-01-275-2536
Remote Control Lever

012752536
0301-063: RNCC: 3 | RNVC: 2
60-505-0033-2: RNCC: 5 | RNVC: 9
60-0030-1: RNCC: C | RNVC: 1

19 Mar 1988

3040-01-276-6999
Brake Drum

012766999
120503-1: RNCC: 3 | RNVC: 2
3040PL0827164: RNCC: 6 | RNVC: 9

12 Apr 1988

3040-01-277-4731
Manual Control Lever

012774731
214-060-309-101: RNCC: 3 | RNVC: 2
214-060-309: RNCC: D | RNVC: 9

22 Apr 1988

3040-01-277-7655
Rigid Connecting Link

012777655
160003: RNCC: 3 | RNVC: 2

27 Apr 1988

3040-01-280-4382
Counterbalance Weight

012804382
12363613: RNCC: 3 | RNVC: 2
20511155: RNCC: 5 | RNVC: 9
20511155: RNCC: 5 | RNVC: 9
20511151: RNCC: C | RNVC: 1

9 Jun 1988

3040-01-281-1426
Shaft Retaining Plate

012811426
9379389: RNCC: 3 | RNVC: 2

17 Jun 1988

3040-01-281-2086
Bell Crank

012812086
116299-1: RNCC: 3 | RNVC: 2

18 Jun 1988

3040-01-283-5036
Linear Actuating Cylinder Assembly Parts Kit

012835036
KS-01: RNCC: 3 | RNVC: 2
300066: RNCC: C | RNVC: 1
640108: RNCC: C | RNVC: 1
700098: RNCC: C | RNVC: 1

6 Aug 1988

3040-01-284-4923
Linear Actuating Cylinder Head

012844923
02-40702-7: RNCC: 3 | RNVC: 2
02-60132 ITEM 5: RNCC: 5 | RNVC: 9
02-60132 ITEM 5: RNCC: C | RNVC: 1
02-60132: RNCC: D | RNVC: 9

24 Aug 1988

3040-01-284-6185
Linear Actuating Cylinder Piston

012846185
23016569: RNCC: 3 | RNVC: 2
2DA595: RNCC: 5 | RNVC: 2
2DA595: RNCC: 5 | RNVC: 9

26 Aug 1988

3040-01-285-2273
Remote Control Lever

012852273
116129-5: RNCC: 3 | RNVC: 2

9 Sep 1988

3040-01-286-5779
Mechanical Drive Housing

012865779
12364159: RNCC: 3 | RNVC: 2

5 Oct 1988

3040-01-286-8653
Shaft Collar

012868653
1517: RNCC: 3 | RNVC: 2

9 Oct 1988

3040-01-287-4449
Linear Actuating Cylinder

012874449
Q40074: RNCC: 3 | RNVC: 9
1603060: RNCC: 5 | RNVC: 2
1603060: RNCC: 5 | RNVC: 9

22 Oct 1988

3040-01-287-5152
Linear Actuating Cylinder Assembly

012875152
1H000110409: RNCC: 3 | RNVC: 2
DRHHY72B2B1.5-3.0.625-3000DA: RNCC: 5 | RNVC: 9
1H000110409: RNCC: 5 | RNVC: 9
85297832-0001: RNCC: 5 | RNVC: 9
85297832-0001: RNCC: 5 | RNVC: 9
DHV272B22B-150-300-63-63-S11-0: RNCC: 5 | RNVC: 9

23 Oct 1988

3040-01-295-3695
Linear Actuating Cylinder Cap

012953695
N1460: RNCC: 3 | RNVC: 2
1809-1289 ITEM 11: RNCC: 5 | RNVC: 2

4 Mar 1989

3040-01-295-0940
Shouldered Shaft

012950940
3N4858: RNCC: 3 | RNVC: 2

28 Feb 1989

3040-01-296-0500
Cone

012960500
10560122: RNCC: 3 | RNVC: 2
390-0347: RNCC: 5 | RNVC: 9

16 Mar 1989

3040-01-289-6789
Linear Actuating Cylinder

012896789
12295292: RNCC: 3 | RNVC: 2
10388376: RNCC: 6 | RNVC: 9

28 Nov 1988

3040-01-296-0516
Spindle Hydraulic

012960516
345-4525: RNCC: 3 | RNVC: 2
10524129: RNCC: 5 | RNVC: 2
345-4525: RNCC: 5 | RNVC: 9

16 Mar 1989

3040-01-290-3113
Shouldered Shaft

012903113
70250-81005-101: RNCC: 3 | RNVC: 2

9 Dec 1988

3040-01-296-0525
Straight Shaft

012960525
316-7020: RNCC: 3 | RNVC: 9
316-7020: RNCC: 5 | RNVC: 2
10524110: RNCC: 5 | RNVC: 2
316-7020: RNCC: 5 | RNVC: 9

16 Mar 1989

3040-01-297-1414
Shouldered Shaft

012971414
DAA3222D341-001: RNCC: 3 | RNVC: 2
DAA3222D341-001: RNCC: 5 | RNVC: 2

29 Mar 1989

3040-01-297-6580
Mechanical Drive Housing

012976580
12577114: RNCC: 3 | RNVC: 2
K-82: RNCC: 5 | RNVC: 2
K-82: RNCC: 5 | RNVC: 9
K-82: RNCC: 5 | RNVC: 9
12577114: RNCC: 5 | RNVC: 9

5 Apr 1989

3040-01-298-6743
Multiple Gears Gearshaft

012986743
10029078: RNCC: 3 | RNVC: 2

19 Apr 1989

3040-01-298-9018
Mechanical Drive Housing

012989018
116069-6: RNCC: 3 | RNVC: 2

23 Apr 1989

3040-01-299-0525
Helical Gearshaft

012990525
313-120 REF.5A: RNCC: 3 | RNVC: 2

24 Apr 1989

3040-01-299-5734
Linear Actuating Cylinder Assembly Parts Kit

012995734
9420410120: RNCC: 3 | RNVC: 2
9420410120: RNCC: 3 | RNVC: 9
9420400120: RNCC: 5 | RNVC: 9

4 May 1989

3040-01-299-9288
Linear Actuating Cylinder Head

012999288
711-6160339 ITEM 3: RNCC: 3 | RNVC: 2
711-6160339 ITE: RNCC: C | RNVC: 1

7 May 1989

3040-01-300-9200
Rigid Connecting Link

013009200
60133: RNCC: 3 | RNVC: 2
60133A: RNCC: 3 | RNVC: 2
60133: RNCC: 5 | RNVC: 9
60133A: RNCC: 5 | RNVC: 9

20 May 1989

3040-01-301-8060
Shaft Idler

013018060
10894570: RNCC: 3 | RNVC: 2

3 Jun 1989

3040-01-303-5074
Shouldered Shaft

013035074
200SGL1103: RNCC: 3 | RNVC: 9
200SGL1103: RNCC: 5 | RNVC: 2

30 Jun 1989

3040-01-302-6646
Shouldered Shaft

013026646
70361-08006-102: RNCC: 3 | RNVC: 2
70361-08006-102: RNCC: 5 | RNVC: 2
70361-08006-102: RNCC: 5 | RNVC: 2
70361-08006: RNCC: D | RNVC: 9

17 Jun 1989

3040-01-304-4085
Shouldered Shaft

013044085
3829814-2: RNCC: 3 | RNVC: 2
3829814-2: RNCC: 5 | RNVC: 2
3829814-2: RNCC: 5 | RNVC: 2

18 Jul 1989

3040-01-304-9000
Cover Linkage Arm

013049000
510212G1: RNCC: 3 | RNVC: 2
510212G1: RNCC: 5 | RNVC: 9

28 Jul 1989

3040-01-305-7904
Shouldered Shaft

013057904
1 463 590 311: RNCC: 3 | RNVC: 2
1-463-590-311: RNCC: 3 | RNVC: 2
1-463-590-311: RNCC: 5 | RNVC: 2

11 Aug 1989

3040-01-305-8267
Shouldered Shaft

013058267
47355: RNCC: 3 | RNVC: 2
MSAA-7-14 PC8: RNCC: 5 | RNVC: 2

12 Aug 1989

3040-01-306-6874
Rigid Connecting Link

013066874
90617: RNCC: 3 | RNVC: 9
90617: RNCC: 5 | RNVC: 9
90617: RNCC: 5 | RNVC: 9

29 Aug 1989

3040-01-307-2556
Control Cam

013072556
16S1534-9: RNCC: 3 | RNVC: 2

8 Sep 1989

3040-01-307-3517
Shouldered Shaft

013073517
ML50K-316: RNCC: 3 | RNVC: 9
ML50K-316: RNCC: 5 | RNVC: 9

9 Sep 1989

3040-01-307-3867
Bell Crank

013073867
3930AS540-2: RNCC: 3 | RNVC: 2
3930AS540-2: RNCC: 5 | RNVC: 2
3930AS540-2: RNCC: 5 | RNVC: 2
74A733023-2006: RNCC: 5 | RNVC: 9
74A733023-2006: RNCC: 5 | RNVC: 9
10107013: RNCC: 6 | RNVC: 9
74A733023: RNCC: D | RNVC: 9

9 Sep 1989

3040-01-307-5274
Rigid Connecting Link

013075274
65-51851-1: RNCC: 3 | RNVC: 2

13 Sep 1989

3040-01-308-0727
Breather

013080727
1306-3: RNCC: 3 | RNVC: 2
13063: RNCC: 5 | RNVC: 2
ABF-3/10-F: RNCC: 5 | RNVC: 9
ABF-3/10-F: RNCC: 5 | RNVC: 9

22 Sep 1989

3040-01-307-7989
Control Cam

013077989
H-2252 PIECE 35: RNCC: 3 | RNVC: 2
M-1863E: RNCC: 5 | RNVC: 2
H-2252: RNCC: D | RNVC: 9

16 Sep 1989

3040-01-308-3082
Bell Crank

013083082
70400-02212-047: RNCC: 3 | RNVC: 2

27 Sep 1989

3040-01-308-5315
Shaft Retaining Plate

013085315
32-08507-3003-4: RNCC: 3 | RNVC: 2
32-08507-3003-4: RNCC: 5 | RNVC: 1

29 Sep 1989

3040-01-308-5567
Remote Control Lever

013085567
4065913: RNCC: 3 | RNVC: 2
4065913: RNCC: 5 | RNVC: 2
4065913: RNCC: 5 | RNVC: 2
3040PL0668448: RNCC: 6 | RNVC: 9

30 Sep 1989

3040-01-309-4149
Linear Actuating Cylinder Piston

013094149
8-690: RNCC: 3 | RNVC: 2

18 Oct 1989

3040-01-309-7297
Rigid Connecting Link

013097297
145CS340-9: RNCC: 3 | RNVC: 2
89-1000-9: RNCC: 3 | RNVC: 9

21 Oct 1989

3040-01-309-7949
Rigid Connecting Link

013097949
116038-9: RNCC: 3 | RNVC: 2

23 Oct 1989

3040-01-311-0073
Piston Ring

013110073
399719R1: RNCC: 3 | RNVC: 9
399719R1: RNCC: 5 | RNVC: 2
399719R1: RNCC: 5 | RNVC: 2

17 Nov 1989

3040-01-311-3947
Mechanical Drive Housing

013113947
8-007-209-01: RNCC: 3 | RNVC: 2

25 Nov 1989

3040-01-311-5091
Mechanical Drive Housing

013115091
10029009: RNCC: 3 | RNVC: 2

29 Nov 1989

3040-01-311-4015
Actuator Camshaft

013114015
A1053A155: RNCC: 3 | RNVC: 2

25 Nov 1989

3040-01-314-1079
Hub Clamp

013141079
1560-EG-109: RNCC: 3 | RNVC: 2

24 Jan 1990

3040-01-315-3945
Breather

013153945
FB-A008XG: RNCC: 3 | RNVC: 2
A-100-X-G: RNCC: 5 | RNVC: 9

15 Feb 1990

3040-01-315-6275
Shouldered Shaft

013156275
2B1-1197: RNCC: 3 | RNVC: 2

21 Feb 1990

3040-01-315-5228
Hub Clamp

013155228
12361751: RNCC: 3 | RNVC: 2

17 Feb 1990

3040-01-252-2654
Linear Actuating Cylinder Assembly Parts Kit

012522654
SKN5-660-11-V: RNCC: 3 | RNVC: 9
SKN5-660-11-V: RNCC: 5 | RNVC: 2
SKN5-660-11-V: RNCC: 5 | RNVC: 9

31 Mar 1987

3040-01-252-4065
Counterbalance Weight

012524065
A334A196-105: RNCC: 3 | RNVC: 2

1 Apr 1987

3040-01-252-1817
Shouldered Shaft

012521817
604981-70-RA: RNCC: 3 | RNVC: 9
604981-70-RA: RNCC: C | RNVC: 1

30 Mar 1987

3040-01-253-0579
Remote Control Lever

012530579
842B1212: RNCC: 3 | RNVC: 2
CS-3040-SV-0734: RNCC: 3 | RNVC: 2

11 Apr 1987

3040-01-254-5607
Linear Actuating Cylinder Head

012545607
9T0416: RNCC: 3 | RNVC: 2

7 May 1987

3040-01-254-6037
Piston Ring

012546037
T151304: RNCC: 3 | RNVC: 2
4642308013: RNCC: 5 | RNVC: 2
T116576: RNCC: 5 | RNVC: 9
4642 308 013: RNCC: 5 | RNVC: 9

8 May 1987

3040-01-255-0961
Shouldered Shaft

012550961
5501550203: RNCC: 3 | RNVC: 2
8381550903: RNCC: 5 | RNVC: 2
8381550903: RNCC: 5 | RNVC: 9

15 May 1987

3040-01-255-4453
Rigid Connecting Link

012554453
419 553 72 28: RNCC: 3 | RNVC: 2

20 May 1987

3040-01-255-6756
Counterbalance Weight

012556756
214-011-806-101: RNCC: 3 | RNVC: 2
214-011-806: RNCC: D | RNVC: 9

23 May 1987

3040-01-256-1980
Shouldered Shaft

012561980
3867034R-1: RNCC: 3 | RNVC: 2
3867034-1: RNCC: 5 | RNVC: 9
3867034-1: RNCC: 5 | RNVC: 9

3 Jun 1987

3040-01-257-3629
Remote Control Lever

012573629
3039163: RNCC: 3 | RNVC: 2
3039163: RNCC: 3 | RNVC: 2
04.03 OPTION BP6042 REFERENCE 2: RNCC: 5 | RNVC: 2
3039163: RNCC: 5 | RNVC: 2
04.03 OPTION BP6042/2: RNCC: 5 | RNVC: 2
206231: RNCC: 5 | RNVC: 9
206231: RNCC: 5 | RNVC: 9
3028087: RNCC: C | RNVC: 1

17 Jun 1987

3040-01-257-3766
Pawl

012573766
RP-2: RNCC: 3 | RNVC: 9
RP-2: RNCC: 5 | RNVC: 9
5-13-4630: RNCC: 7 | RNVC: 2

17 Jun 1987

3040-01-257-3755
Rotary Actuating Cylinder Assembly

012573755
G109434: RNCC: 3 | RNVC: 2
G109434: RNCC: 5 | RNVC: 2
G103350: RNCC: C | RNVC: 1

17 Jun 1987

3040-01-258-2789
Rigid Connecting Link

012582789
905484: RNCC: 3 | RNVC: 2

1 Jul 1987

3040-01-258-5185
Control Cam

012585185
B4123-12: RNCC: 3 | RNVC: 2
B4123: RNCC: D | RNVC: 9

3 Jul 1987

3040-01-259-1112
Linear Actuating Cylinder Assembly

012591112
74A410672-1005: RNCC: 3 | RNVC: 2
74A410672-1005: RNCC: 5 | RNVC: 2
74A410672-1005: RNCC: 5 | RNVC: 2
74A410672-1005: RNCC: 5 | RNVC: 2
74A410672-1005: RNCC: 5 | RNVC: 2
74A410672-1005: RNCC: 5 | RNVC: 9
74A410672-1005: RNCC: 5 | RNVC: 9
74A410672-1005: RNCC: 5 | RNVC: 9
10106992: RNCC: 6 | RNVC: 9
74A410672-1005: RNCC: C | RNVC: 1

13 Jul 1987

3040-01-259-7385
Subassembly Chamber

012597385
00-846486: RNCC: 3 | RNVC: 2
846486: RNCC: 5 | RNVC: 9
434-629-053: RNCC: C | RNVC: 1

22 Jul 1987

3040-01-259-8607
Linear Actuating Cylinder

012598607
72-70: RNCC: 3 | RNVC: 9
72-70: RNCC: 5 | RNVC: 9
3040PL0811297: RNCC: 6 | RNVC: 9

22 Jul 1987

3040-01-264-7630
Rigid Connecting Link

012647630
413-10963-1: RNCC: 3 | RNVC: 2

6 Oct 1987

3040-01-264-6916
Thrust Shoe

012646916
15 75-9176-2: RNCC: 3 | RNVC: 2
469176 PIECE 2: RNCC: 5 | RNVC: 2

5 Oct 1987

3040-01-265-1099
Rigid Connecting Link

012651099
L3223675-005: RNCC: 3 | RNVC: 2

9 Oct 1987

3040-01-260-4418
Linear Actuating Cylinder Assembly Parts Kit

012604418
1124749C94: RNCC: 3 | RNVC: 9
1124749C94: RNCC: 5 | RNVC: 2
1124749C93: RNCC: 5 | RNVC: 9

31 Jul 1987

3040-01-266-1127
Plug Retainer

012661127
6130291 PIECE 7: RNCC: 3 | RNVC: 2
EN DM50995 ITEM 6: RNCC: 5 | RNVC: 2
EN DM50995 ITEM 6: RNCC: 5 | RNVC: 2
501-6130291 ITE: RNCC: C | RNVC: 1

21 Oct 1987

3040-01-266-3546
Rigid Connecting Link

012663546
16P1106-3: RNCC: 3 | RNVC: 2
16P1106-3: RNCC: 5 | RNVC: 2
3040PL0668176: RNCC: 6 | RNVC: 9

23 Oct 1987

3040-01-267-0500
Manual Control Lever

012670500
5863098-101: RNCC: 3 | RNVC: 2
5863098-101: RNCC: 5 | RNVC: 2
5863098-101: RNCC: 5 | RNVC: 9
586098-1: RNCC: 5 | RNVC: 9
5863098: RNCC: D | RNVC: 9

4 Nov 1987

3040-01-267-8767
Remote Control Lever

012678767
DYNC 861: RNCC: 3 | RNVC: 9
DYNC 861: RNCC: 5 | RNVC: 9
849076: RNCC: 5 | RNVC: 9

19 Nov 1987

3040-01-268-7453
Manual Control Lever

012687453
01016300: RNCC: 3 | RNVC: 2
7-593-000206: RNCC: 5 | RNVC: 2
C7-593-000206: RNCC: D | RNVC: 9

5 Dec 1987

3040-01-268-9887
Straight Shaft

012689887
4-137-9-00115: RNCC: 3 | RNVC: 2

10 Dec 1987

3040-01-261-1060
Straight Shaft

012611060
3825266: RNCC: 3 | RNVC: 2
3825266: RNCC: 5 | RNVC: 2
3825266: RNCC: 5 | RNVC: 9
10106994: RNCC: 6 | RNVC: 9

8 Aug 1987

3040-01-262-8433
Breather

012628433
574480-02: RNCC: 3 | RNVC: 2
574480-02: RNCC: 5 | RNVC: 2
121452: RNCC: 5 | RNVC: 2
574480-01: RNCC: 5 | RNVC: 9

4 Sep 1987

3040-01-263-3018
Mechanical Drive Housing

012633018
4051G67-001: RNCC: 3 | RNVC: 2
4051G67-001: RNCC: 5 | RNVC: 9

12 Sep 1987

3040-01-263-6679
Bell Crank

012636679
L5226050-011: RNCC: 3 | RNVC: 2

17 Sep 1987

3040-01-263-1410
Mechanical Drive Housing

012631410
948F791-1: RNCC: 3 | RNVC: 2
948F791-1: RNCC: 5 | RNVC: 9

9 Sep 1987

3040-01-269-0440
Water Jacket Housing

012690440
6105114: RNCC: 3 | RNVC: 2

11 Dec 1987

3040-01-269-1603
Shouldered Shaft

012691603
5906116: RNCC: 3 | RNVC: 2
5906116: RNCC: 5 | RNVC: 2
5906116: RNCC: 5 | RNVC: 9

12 Dec 1987

3040-01-269-5634
Control Cam

012695634
65751-03189-044: RNCC: 3 | RNVC: 2
65751-03189-42: RNCC: 5 | RNVC: 9
65751-03189-044: RNCC: 5 | RNVC: 9
65751-03189: RNCC: D | RNVC: 9

18 Dec 1987

3040-01-270-2369
Straight Shaft

012702369
1887158-102: RNCC: 3 | RNVC: 9

1 Jan 1988

3040-01-270-3297
Shouldered Shaft

012703297
3167485-3: RNCC: 3 | RNVC: 2
3167485-3: RNCC: 5 | RNVC: 9

4 Jan 1988

3040-01-270-2370
Straight Shaft

012702370
1887158-118: RNCC: 3 | RNVC: 2

1 Jan 1988

3040-01-270-7602
Manual Control Lever

012707602
12351247: RNCC: 3 | RNVC: 2

13 Jan 1988

3040-01-270-7961
Rigid Connecting Link

012707961
12340995-1: RNCC: 3 | RNVC: 2
12340995-1: RNCC: 5 | RNVC: 2
5592013: RNCC: 5 | RNVC: 9
5592013-C: RNCC: D | RNVC: 9

13 Jan 1988

3040-01-271-1327
Pad Stop

012711327
314-2272: RNCC: 3 | RNVC: 2
10524158: RNCC: 5 | RNVC: 2
314-2272: RNCC: 5 | RNVC: 9

19 Jan 1988

3040-01-271-9106
Flexible Control Casing

012719106
B-419-9132-301: RNCC: 3 | RNVC: 2
9132-301: RNCC: 5 | RNVC: 2
25299-901: RNCC: 5 | RNVC: 9
S25299-901: RNCC: 5 | RNVC: 9

2 Feb 1988

3040-01-275-2535
Push-Pull Control Assembly

012752535
12351514-4: RNCC: 3 | RNVC: 2
12351514-4: RNCC: 3 | RNVC: 2
12351514-4: RNCC: 5 | RNVC: 2
HTL300002-5: RNCC: 5 | RNVC: 9
12351700-5: RNCC: 5 | RNVC: 9
12351514: RNCC: D | RNVC: 9

19 Mar 1988

3040-01-276-6630
Mechanical Drive Housing

012766630
9363695: RNCC: 3 | RNVC: 2

10 Apr 1988

3040-01-276-7607
Manual Control Lever

012767607
B11851-1: RNCC: 3 | RNVC: 2
B11851-1: RNCC: 5 | RNVC: 9

13 Apr 1988

3040-01-278-1900
Pawl

012781900
11460447: RNCC: 3 | RNVC: 2

3 May 1988

3040-01-278-9383
Rigid Connecting Link

012789383
65662-03266-046: RNCC: 3 | RNVC: 2

11 May 1988

3040-01-280-4113
Straight Shaft

012804113
S4127 PART 81: RNCC: 3 | RNVC: 2

9 Jun 1988

3040-01-280-4153
Throttle Rod Slip Union

012804153
20510914: RNCC: 3 | RNVC: 2
20510914: RNCC: 5 | RNVC: 2
20510914: RNCC: 5 | RNVC: 9

9 Jun 1988

3040-01-281-0885
Control Cam

012810885
T56344: RNCC: 3 | RNVC: 2
T56344: RNCC: 3 | RNVC: 9

17 Jun 1988

3040-01-281-7965
Control Cam

012817965
4164J60-001: RNCC: 3 | RNVC: 2
718L175 ITEM 3: RNCC: 5 | RNVC: 2

1 Jul 1988

3040-01-281-8015
Rigid Connecting Link

012818015
3132J72-001: RNCC: 3 | RNVC: 2
958E351 ITEM 4: RNCC: 5 | RNVC: 2

1 Jul 1988

3040-01-281-7909
Shaft Collar

012817909
X308577: RNCC: 3 | RNVC: 2
958E350 ITEM 106: RNCC: 5 | RNVC: 2
4196J47-G01: RNCC: 5 | RNVC: 9

1 Jul 1988

3040-01-282-0186
Ball Joint

012820186
50133300: RNCC: 3 | RNVC: 2

6 Jul 1988

3040-01-281-9722
Rigid Connecting Link

012819722
12360368: RNCC: 3 | RNVC: 2

5 Jul 1988

3040-01-282-0187
Remote Control Lever

012820187
8644857: RNCC: 3 | RNVC: 2
8644857: RNCC: 5 | RNVC: 2
X8644857: RNCC: 5 | RNVC: 2

6 Jul 1988

3040-01-282-4336
Push-Pull Control Assembly

012824336
000-35841-0042: RNCC: 3 | RNVC: 2
35841-32: RNCC: 5 | RNVC: 9
35841-42: RNCC: 5 | RNVC: 9
3040012824336: RNCC: 6 | RNVC: 9
35841: RNCC: D | RNVC: 9

15 Jul 1988

3040-01-282-0188
Rigid Connecting Link

012820188
4183J79-001: RNCC: 3 | RNVC: 9
7569E14 ITEM 10: RNCC: 5 | RNVC: 9
4183J79-001: RNCC: 5 | RNVC: 9
4138J79-001: RNCC: C | RNVC: 1
4183J79-001: RNCC: C | RNVC: 1
4183J79-001: RNCC: C | RNVC: 1

6 Jul 1988

3040-01-285-1304
Rigid Connecting Link

012851304
116077-1: RNCC: 3 | RNVC: 2

7 Sep 1988

3040-01-285-1368
Shouldered Shaft

012851368
18-59MIL3-2406-15: RNCC: 3 | RNVC: 2

7 Sep 1988

3040-01-285-1535
Remote Control Lever

012851535
116129-3: RNCC: 3 | RNVC: 2

8 Sep 1988

3040-01-285-6423
Shoe

012856423
10109968-101: RNCC: 3 | RNVC: 2
10109968-101: RNCC: 5 | RNVC: 9

17 Sep 1988

3040-01-286-7750
Linear Actuating Cylinder Piston

012867750
12364261: RNCC: 3 | RNVC: 2

8 Oct 1988

3040-01-287-0764
Control Cam

012870764
717513148-001: RNCC: 3 | RNVC: 2

14 Oct 1988

3040-01-288-3267
Straight Shaft

012883267
6N2838: RNCC: 3 | RNVC: 2

5 Nov 1988

3040-01-289-3000
Push-Pull Control Assembly

012893000
116-032-263: RNCC: 3 | RNVC: 2
116-032-263: RNCC: 5 | RNVC: 9

20 Nov 1988

3040-01-289-2436
Push-Pull Control Assembly

012892436
090-03339-0072: RNCC: 3 | RNVC: 2
090-03339-0072: RNCC: 5 | RNVC: 9
90-3339-6: RNCC: 5 | RNVC: 9
1366AS305: RNCC: 7 | RNVC: 2

18 Nov 1988

3040-01-290-0239
Engi Shaft Assembly

012900239
4N1098: RNCC: 3 | RNVC: 2

4 Dec 1988

3040-01-290-1308
Shaft Retaining Plate

012901308
7723517-1: RNCC: 3 | RNVC: 2

7 Dec 1988

3040-01-290-5023
Mechanical Drive Housing

012905023
8644797: RNCC: 3 | RNVC: 2
8644797: RNCC: 5 | RNVC: 2

12 Dec 1988

3040-01-293-5796
Remote Control Lever

012935796
4F53286-107E: RNCC: 3 | RNVC: 2
4F53286-107E: RNCC: 5 | RNVC: 9

3 Feb 1989

3040-01-293-7129
Rotary Actuating Cylinder Assembly

012937129
6235-BL: RNCC: 3 | RNVC: 2
9453-BA: RNCC: 5 | RNVC: 2
90037309: RNCC: 5 | RNVC: 2
90029576: RNCC: 5 | RNVC: 9
90009781: RNCC: 5 | RNVC: 9
53560758: RNCC: 5 | RNVC: 9

4 Feb 1989

3040-01-293-6059
Push-Pull Control Assembly

012936059
MS2M5351: RNCC: 3 | RNVC: 2
MS2: RNCC: 5 | RNVC: 9

3 Feb 1989

3040-01-293-6060
Remote Control Lever

012936060
1603140: RNCC: 3 | RNVC: 2
1603140: RNCC: 5 | RNVC: 9

3 Feb 1989

3040-01-294-1842
Rigid Connecting Link

012941842
74A094032-1003: RNCC: 3 | RNVC: 2
74A094032: RNCC: D | RNVC: 9

11 Feb 1989

3040-01-293-6868
Linear Actuating Cylinder Cap

012936868
A1-3144-Q-1005: RNCC: 3 | RNVC: 2

3 Feb 1989

3040-01-296-2534
Rigid Connecting Link

012962534
5219975-1: RNCC: 3 | RNVC: 2
5219975-1: RNCC: 5 | RNVC: 9
5219975: RNCC: D | RNVC: 9

17 Mar 1989

3040-01-297-2894
Counterbalance Weight

012972894
5060T85P01: RNCC: 3 | RNVC: 2

1 Apr 1989

3040-01-298-9016
Multiple Gears Gearshaft

012989016
10029104: RNCC: 3 | RNVC: 2

23 Apr 1989

3040-01-301-9107
Shouldered Shaft

013019107
1132736: RNCC: 3 | RNVC: 2

5 Jun 1989

3040-01-301-3037
Remote Control Lever

013013037
1647370: RNCC: 3 | RNVC: 2
1647370: RNCC: 5 | RNVC: 9

26 May 1989

3040-01-302-5325
Hydraulic Accumulator Piston Rod

013025325
2300-446 ITEM 25: RNCC: 3 | RNVC: 2
845-4457601 PIE: RNCC: C | RNVC: 1

15 Jun 1989

3040-01-302-8376
Manual Control Lever

013028376
863T0960340-020: RNCC: 3 | RNVC: 2
628383: RNCC: 5 | RNVC: 2

21 Jun 1989

3040-01-302-6684
Rigid Connecting Link

013026684
94486-991: RNCC: 3 | RNVC: 9
4538793-001: RNCC: 5 | RNVC: 2
94486-991: RNCC: 5 | RNVC: 9
4538793-001: RNCC: 5 | RNVC: 9

17 Jun 1989

3040-01-305-0958
Shouldered Shaft

013050958
123AMM42126-3: RNCC: 3 | RNVC: 2
123AMM42126-3: RNCC: 5 | RNVC: 2
123AMM42126-3: RNCC: 5 | RNVC: 2
123AMM42126-3: RNCC: 5 | RNVC: 9

1 Aug 1989

3040-01-304-4507
Straight Shaft

013044507
809275-10: RNCC: 3 | RNVC: 2
809275-10: RNCC: 3 | RNVC: 9

19 Jul 1989

3040-01-305-5898
Rigid Connecting Link

013055898
12370092: RNCC: 3 | RNVC: 2

8 Aug 1989

3040-01-305-7988
Brake Disc

013057988
7-388-000093: RNCC: 3 | RNVC: 9
7-388-000093: RNCC: 5 | RNVC: 2
7-388-000076: RNCC: 5 | RNVC: 9

11 Aug 1989

3040-01-305-5738
Mechanical Drive Housing

013055738
ML50K-346: RNCC: 3 | RNVC: 9
ML50K-346: RNCC: 5 | RNVC: 9

8 Aug 1989

3040-01-306-6873
Remote Control Lever

013066873
BAH-117: RNCC: 3 | RNVC: 2
310906-1/DWG.438824: RNCC: 5 | RNVC: 2
438824: RNCC: D | RNVC: 9

29 Aug 1989

3040-01-307-0050
Rigid Connecting Link

013070050
12549787: RNCC: 3 | RNVC: 2
12549787: RNCC: 5 | RNVC: 2
3040013070050: RNCC: 6 | RNVC: 9

4 Sep 1989

3040-01-307-2504
Shouldered Shaft

013072504
10029079-1: RNCC: 3 | RNVC: 2

8 Sep 1989

3040-01-308-5434
Shouldered Shaft

013085434
1363M82P04: RNCC: 3 | RNVC: 2
1363M82P04: RNCC: 5 | RNVC: 2

30 Sep 1989

3040-01-308-7096
Rigid Connecting Link

013087096
89-1000-5: RNCC: 3 | RNVC: 9
145CS340-5: RNCC: 7 | RNVC: 2
145C2010-12: RNCC: E | RNVC: 8

3 Oct 1989

3040-01-309-7950
Rigid Connecting Link

013097950
116038-11: RNCC: 3 | RNVC: 2

23 Oct 1989

3040-01-310-0037
Shaft Collar

013100037
S8542HA: RNCC: 3 | RNVC: 2

27 Oct 1989

3040-01-311-1161
Worm Wheel Gearshaft

013111161
932-250-00: RNCC: 3 | RNVC: 2
932-250-00: RNCC: 5 | RNVC: 9

19 Nov 1989

3040-01-311-3240
Linear Actuating Cylinder Assembly

013113240
GG123204F0: RNCC: 3 | RNVC: 2

23 Nov 1989

3040-01-311-7556
Linear Actuating Cylinder Assembly

013117556
1H2H0A00110371: RNCC: 3 | RNVC: 2
AG163150B0: RNCC: 5 | RNVC: 9

5 Dec 1989

3040-01-312-1378
Breather

013121378
BF2143: RNCC: 3 | RNVC: 2

12 Dec 1989

3040-01-312-2892
Brake Holding Plate

013122892
8-076-204-00: RNCC: 3 | RNVC: 2

13 Dec 1989

3040-01-311-8402
Shaft Collar

013118402
ASP-LC-MV06: RNCC: 3 | RNVC: 2
ASP-LC-MV06: RNCC: 5 | RNVC: 2
GC580Y6: RNCC: 5 | RNVC: 2
5PTV1501-6C: RNCC: 7 | RNVC: 2

6 Dec 1989

3040-01-313-2878
Manual Control Lever

013132878
255229: RNCC: 3 | RNVC: 9
255229: RNCC: 5 | RNVC: 2
255229: RNCC: C | RNVC: 1

4 Jan 1990

3040-01-313-2894
Linear Actuating Cylinder

013132894
DHA1-377: RNCC: 3 | RNVC: 2
6607534: RNCC: D | RNVC: 9
6607534: RNCC: D | RNVC: 9

4 Jan 1990

3040-01-313-5434
Straight Shaft

013135434
15739: RNCC: 3 | RNVC: 2

11 Jan 1990

3040-01-314-5562
Extension Shaft

013145562
65912-01701-101: RNCC: 3 | RNVC: 2

1 Feb 1990

3040-01-314-5916
Remote Control Lever

013145916
735675: RNCC: 3 | RNVC: 2
10107015: RNCC: 6 | RNVC: 9

1 Feb 1990

3040-01-314-8598
Linear Actuating Cylinder Head

013148598
3169297-1: RNCC: 3 | RNVC: 2
3169297-1: RNCC: 5 | RNVC: 2
10107016: RNCC: 6 | RNVC: 9

7 Feb 1990

3040-01-259-9138
Rotating Shaft Eye Bracket

012599138
12552964-1: RNCC: 3 | RNVC: 2

23 Jul 1987

3040-01-273-2505
Linear Actuating Cylinder Piston Rod

012732505
0325540: RNCC: 3 | RNVC: 9
325540: RNCC: 5 | RNVC: 9
325540: RNCC: 5 | RNVC: 9
0325540: RNCC: 5 | RNVC: 9
325540: RNCC: 5 | RNVC: 9
0325540: RNCC: 5 | RNVC: 9
325540: RNCC: 5 | RNVC: 9

22 Feb 1988

3040-01-271-6577
Rigid Connecting Link

012716577
68A413043-1003: RNCC: 3 | RNVC: 2

29 Jan 1988

3040-01-273-5677
Manual Control Lever

012735677
2-7070: RNCC: 3 | RNVC: 2

26 Feb 1988

3040-01-279-4260
Control Cam

012794260
318810-3: RNCC: 3 | RNVC: 2

18 May 1988

3040-01-280-4117
Shouldered Shaft

012804117
11788: RNCC: 3 | RNVC: 2
11788: RNCC: 5 | RNVC: 9
SH-7247 DETAIL 54: RNCC: 5 | RNVC: 9

9 Jun 1988

3040-01-280-8225
Straight Shaft

012808225
5-39MIL3-1003-15: RNCC: 3 | RNVC: 2

13 Jun 1988

3040-01-278-5605
Brake Disc

012785605
31063784: RNCC: 3 | RNVC: 2
65227: RNCC: 5 | RNVC: 9

6 May 1988

3040-01-278-7824
Hub Clamp

012787824
CL-24-SS: RNCC: 3 | RNVC: 2
11463245: RNCC: 5 | RNVC: 2
11463245: RNCC: 5 | RNVC: 9
11463245: RNCC: 7 | RNVC: 2

10 May 1988

3040-01-251-8877
Counterbalance Weight

012518877
A334A200-104: RNCC: 3 | RNVC: 2

25 Mar 1987

3040-01-252-0883
Nose Door Shaft

012520883
70209-21217-115: RNCC: 3 | RNVC: 2

29 Mar 1987

3040-01-252-4289
Shouldered Shaft

012524289
8267825: RNCC: 3 | RNVC: 2

2 Apr 1987

3040-01-253-7452
Rotating Shaft Eye Bracket

012537452
RYLC 366: RNCC: 3 | RNVC: 2

24 Apr 1987

3040-01-253-3512
Rigid Connecting Link

012533512
75A337946-2003: RNCC: 3 | RNVC: 2
75A337946-2003: RNCC: 5 | RNVC: 2
75A337946-2003: RNCC: 5 | RNVC: 2
75A337946-2003: RNCC: C | RNVC: 1

17 Apr 1987

3040-01-254-5618
Flexible Shaft Assembly

012545618
9467: RNCC: 3 | RNVC: 2
197C7440: RNCC: 3 | RNVC: 2
031217507X01500: RNCC: 5 | RNVC: 2
FAUSG12WX1: RNCC: 5 | RNVC: 2
17507X: RNCC: 5 | RNVC: 9
S22321-801: RNCC: 5 | RNVC: 9
22321-801: RNCC: 5 | RNVC: 9
17507X: RNCC: 5 | RNVC: 9

7 May 1987

3040-01-254-4941
Shouldered Shaft

012544941
1002356: RNCC: 3 | RNVC: 2

5 May 1987

3040-01-254-6869
Mechanical Drive Housing

012546869
16K0585-9: RNCC: 3 | RNVC: 2

8 May 1987

3040-01-255-1954
Shouldered Shaft

012551954
604926-6-BE: RNCC: 3 | RNVC: 2
604926-6-BE: RNCC: 3 | RNVC: 9

15 May 1987

3040-01-255-6664
Straight Shaft

012556664
110302-100: RNCC: 3 | RNVC: 2
110302-100: RNCC: 3 | RNVC: 9
A3035086: RNCC: C | RNVC: 1
110302: RNCC: D | RNVC: 9

23 May 1987

3040-01-255-9952
Spur Gearshaft

012559952
5073D188-3: RNCC: 3 | RNVC: 2
5073D188: RNCC: D | RNVC: 9

30 May 1987

3040-01-256-2256
Flexible Shaft Assembly

012562256
57714-03: RNCC: 3 | RNVC: 2
57714-3: RNCC: 3 | RNVC: 9

3 Jun 1987

3040-01-258-9487
Shaft Retaining Plate

012589487
2051G92-001: RNCC: 3 | RNVC: 2
2051G92-001: RNCC: 5 | RNVC: 9
2051G92: RNCC: D | RNVC: 9

10 Jul 1987

3040-01-260-1881
Shouldered Shaft

012601881
340-2371-000: RNCC: 3 | RNVC: 2
330-4328-000: RNCC: 5 | RNVC: 9
3304328000: RNCC: 5 | RNVC: 9
340-2371-000: RNCC: 5 | RNVC: 9

28 Jul 1987

3040-01-260-6892
Bearing Shaft

012606892
3136-033: RNCC: 3 | RNVC: 2

4 Aug 1987

3040-01-260-4363
Linear Actuating Cylinder Assembly Parts Kit

012604363
Y047167: RNCC: 3 | RNVC: 2
47167: RNCC: 3 | RNVC: 9

31 Jul 1987

3040-01-263-7101
Control Cam

012637101
401-6160210 PC 13: RNCC: 3 | RNVC: 2
97-37-537: RNCC: 5 | RNVC: 2

17 Sep 1987

3040-01-264-7241
Shouldered Shaft

012647241
609141-61-RA: RNCC: 3 | RNVC: 9

5 Oct 1987

3040-01-264-9691
Bell Crank

012649691
12362035: RNCC: 3 | RNVC: 2

8 Oct 1987

3040-01-266-6868
Linear Actuating Cylinder

012666868
2B1-2426: RNCC: 3 | RNVC: 2

30 Oct 1987

3040-01-266-7196
Linear Actuating Cylinder Assembly Parts Kit

012667196
999-073271151: RNCC: 3 | RNVC: 2
787AS285-17: RNCC: 5 | RNVC: 2

30 Oct 1987

3040-01-267-0619
Push-Pull Control Assembly

012670619
37818-4: RNCC: 3 | RNVC: 2
LE162/0041/0039: RNCC: 5 | RNVC: 2
3781803-4: RNCC: 5 | RNVC: 9
LE162-0041: RNCC: 7 | RNVC: 1

4 Nov 1987

3040-01-267-0621
Push-Pull Control Assembly

012670621
307546-00-072.0: RNCC: 3 | RNVC: 2
238-9512-001: RNCC: 5 | RNVC: 2
D044192-003-0072.0: RNCC: 5 | RNVC: 9
D044192-003-0072.0: RNCC: 5 | RNVC: 9
238-9512: RNCC: D | RNVC: 9

4 Nov 1987

3040-01-267-3243
Linear Actuating Cylinder Head

012673243
621066-1: RNCC: 3 | RNVC: 2

9 Nov 1987

3040-01-268-0243
Straight Shaft

012680243
4001044: RNCC: 3 | RNVC: 2
206890: RNCC: 3 | RNVC: 2

21 Nov 1987

3040-01-261-1059
Straight Shaft

012611059
3825156: RNCC: 3 | RNVC: 2
3825156: RNCC: 5 | RNVC: 2
3825156: RNCC: 5 | RNVC: 9

8 Aug 1987

3040-01-262-6047
Shaft Retaining Plate

012626047
70-502: RNCC: 3 | RNVC: 2
70-502: RNCC: 5 | RNVC: 2

2 Sep 1987

3040-01-263-2531
Bell Crank

012632531
413-10680-1: RNCC: 3 | RNVC: 2
413-10680-1: RNCC: 5 | RNVC: 9

11 Sep 1987

3040-01-262-6237
Linear Actuating Cylinder

012626237
47-7108: RNCC: 3 | RNVC: 2
207128: RNCC: 5 | RNVC: 9
600 1912: RNCC: D | RNVC: 9

2 Sep 1987

3040-01-263-7056
Push-Pull Control Assembly

012637056
43C-8FT: RNCC: 3 | RNVC: 2
43C-8FT: RNCC: 5 | RNVC: 9
D038012-003-08: RNCC: C | RNVC: 1
012194: RNCC: C | RNVC: 1

17 Sep 1987

3040-01-263-3135
Assembly Cover

012633135
206857: RNCC: 3 | RNVC: 2

12 Sep 1987

3040-01-263-8797
Shouldered Shaft

012638797
413-10988-1: RNCC: 3 | RNVC: 2

21 Sep 1987

3040-01-269-5500
Bell Crank

012695500
L5226312-001: RNCC: 3 | RNVC: 2

18 Dec 1987

3040-01-269-2776
Linear Actuating Cylinder Piston

012692776
5210081: RNCC: 3 | RNVC: 2
5210069 PART 9: RNCC: 5 | RNVC: 2
521069 PIECE 9: RNCC: 5 | RNVC: 9

14 Dec 1987

3040-01-269-6636
Deckstand Shaft

012696636
60-315-0402-3: RNCC: 3 | RNVC: 2

18 Dec 1987

3040-01-270-6833
Extension Shaft

012706833
10114: RNCC: 3 | RNVC: 2
000005: RNCC: 5 | RNVC: 2

12 Jan 1988

3040-01-272-7611
Shouldered Shaft

012727611
151-218-320-777-002: RNCC: 3 | RNVC: 2

13 Feb 1988

3040-01-273-3351
Straight Shaft

012733351
2041828-1: RNCC: 3 | RNVC: 2
2041828-1: RNCC: 5 | RNVC: 9

24 Feb 1988

3040-01-273-4460
Bell Crank

012734460
10918945: RNCC: 3 | RNVC: 2
10918945: RNCC: 5 | RNVC: 2

25 Feb 1988

3040-01-274-1873
Shouldered Shaft

012741873
701166: RNCC: 3 | RNVC: 2

5 Mar 1988

3040-01-274-0181
Friction Lining

012740181
27613-6: RNCC: 3 | RNVC: 2
27613-6: RNCC: 5 | RNVC: 2
27613-6: RNCC: 5 | RNVC: 2

4 Mar 1988

3040-01-274-6353
Rigid Connecting Link

012746353
9376152: RNCC: 3 | RNVC: 2

11 Mar 1988

3040-01-275-9601
Bushing Stave

012759601
5950265: RNCC: 3 | RNVC: 2
518-4457077 ITEM 30: RNCC: 5 | RNVC: 2
2010-121 ITEM 30: RNCC: 5 | RNVC: 9
518-4457077: RNCC: D | RNVC: 9

30 Mar 1988

3040-01-276-6440
Manual Control Lever

012766440
16C1055-9: RNCC: 3 | RNVC: 2

10 Apr 1988

3040-01-277-0318
Shouldered Shaft

012770318
13228E5993: RNCC: 3 | RNVC: 2
BS.2318.13.00.005: RNCC: 5 | RNVC: 9
BS.2435.13.00.005: RNCC: 5 | RNVC: 9

16 Apr 1988

3040-01-276-9402
Flexible Shaft Assembly

012769402
9133-201: RNCC: 3 | RNVC: 2
14979-801: RNCC: 3 | RNVC: 9
25306-801: RNCC: 5 | RNVC: 9
B-419-9133-201: RNCC: 5 | RNVC: 9
13638-502: RNCC: 5 | RNVC: 9
14979-801: RNCC: 5 | RNVC: 9
169634-7: RNCC: 5 | RNVC: 9

15 Apr 1988

3040-01-277-1428
Shouldered Shaft

012771428
A02C2603-7: RNCC: 3 | RNVC: 2
A02C2603-7: RNCC: 5 | RNVC: 9
A02C2603-2: RNCC: C | RNVC: 1
A02C2603: RNCC: D | RNVC: 9

18 Apr 1988

3040-01-277-6467
Hydraulic Cylinder Fitting

012776467
386933-3: RNCC: 3 | RNVC: 2
386933-3: RNCC: 5 | RNVC: 2
386933-1: RNCC: 5 | RNVC: 9
386933: RNCC: D | RNVC: 9

25 Apr 1988

3040-01-278-1171
Straight Shaft

012781171
9376151: RNCC: 3 | RNVC: 2

30 Apr 1988

3040-01-280-8229
Straight Shaft

012808229
DGC000-92902584: RNCC: 3 | RNVC: 2
11-39MIL3-2006-15: RNCC: 5 | RNVC: 2

13 Jun 1988

3040-01-280-8228
Straight Shaft

012808228
DGB000-92903584: RNCC: 3 | RNVC: 2
5-39MIL3-1606-15: RNCC: 5 | RNVC: 2

13 Jun 1988

3040-01-281-1437
Straight Shaft

012811437
MHLK-255: RNCC: 3 | RNVC: 2
HLK-255: RNCC: 3 | RNVC: 9
HLK-244: RNCC: 5 | RNVC: 9
HLK-244: RNCC: 5 | RNVC: 9
HLK-255: RNCC: 5 | RNVC: 9
HLK-255: RNCC: C | RNVC: 1

17 Jun 1988

3040-01-279-4658
Bell Crank

012794658
20510540: RNCC: 3 | RNVC: 2
20510540: RNCC: 5 | RNVC: 2
20510540: RNCC: 5 | RNVC: 9

18 May 1988

3040-01-279-7570
Remote Control Lever

012797570
B8-008-301-02: RNCC: 3 | RNVC: 2
800830102: RNCC: 5 | RNVC: 9
830HNS: RNCC: 5 | RNVC: 9
N-322-D PC 23: RNCC: 5 | RNVC: 9
8-008-301-02: RNCC: C | RNVC: 1

24 May 1988

3040-01-281-8702
Rigid Connecting Link

012818702
DAA3221A252-001: RNCC: 3 | RNVC: 2
DAA3221A252-001: RNCC: 5 | RNVC: 9

3 Jul 1988

3040-01-282-4252
Control Cam

012824252
C9250-5: RNCC: 3 | RNVC: 2
C9250-5: RNCC: C | RNVC: 1

15 Jul 1988

3040-01-282-7467
Shouldered Shaft

012827467
A-3198-P-16: RNCC: 3 | RNVC: 2
9-049-107212: RNCC: 5 | RNVC: 2

21 Jul 1988

3040-01-284-5391
Control Cam

012845391
116280-1: RNCC: 3 | RNVC: 2
116280-5: RNCC: 5 | RNVC: 9

25 Aug 1988

3040-01-284-6232
Rigid Connecting Link

012846232
50452-2: RNCC: 3 | RNVC: 2
50452: RNCC: D | RNVC: 9

26 Aug 1988

3040-01-285-0086
Pawl

012850086
116286-2: RNCC: 3 | RNVC: 2

3 Sep 1988

3040-01-284-7277
Pawl

012847277
105D3908-2: RNCC: 3 | RNVC: 2
105D3908-2: RNCC: 5 | RNVC: 2

30 Aug 1988

3040-01-285-0085
Remote Control Lever

012850085
68A830864-1001: RNCC: 3 | RNVC: 2

3 Sep 1988

3040-01-285-1305
Flexible Shaft Assembly Core

012851305
29494-1: RNCC: 3 | RNVC: 2

7 Sep 1988

3040-01-285-2236
Shaft Collar

012852236
116110-1: RNCC: 3 | RNVC: 2

8 Sep 1988

3040-01-285-3562
Shouldered Shaft

012853562
117017-1: RNCC: 3 | RNVC: 2
117017-1: RNCC: 5 | RNVC: 9
117017: RNCC: D | RNVC: 9

12 Sep 1988

3040-01-285-7456
Control Cam

012857456
7002761-1: RNCC: 3 | RNVC: 2

20 Sep 1988

3040-01-286-0694
Shouldered Shaft

012860694
BMC-012: RNCC: 3 | RNVC: 9

25 Sep 1988

3040-01-286-8652
Shaft Collar

012868652
1506: RNCC: 3 | RNVC: 2
N00146828002A3: RNCC: 5 | RNVC: 9

9 Oct 1988

3040-01-286-9463
Bell Crank

012869463
209-062-742-101: RNCC: 3 | RNVC: 2
209-062-742: RNCC: D | RNVC: 9

12 Oct 1988

3040-01-287-1841
Rigid Connecting Link

012871841
74A411711-1001: RNCC: 3 | RNVC: 2
74A411711-1001: RNCC: 5 | RNVC: 2
74A411711-1001: RNCC: 5 | RNVC: 2
74A411711-1001: RNCC: 5 | RNVC: 2
74A411711-1001: RNCC: 5 | RNVC: 2
74A411711-1001: RNCC: 5 | RNVC: 9
74A411711-1001: RNCC: 5 | RNVC: 9
74A411711-1001: RNCC: 5 | RNVC: 9
74A411711-1001: RNCC: 5 | RNVC: 9
74A411711-1001: RNCC: 5 | RNVC: 9

18 Oct 1988

3040-01-287-4718
Drive Wheel Assembly

012874718
852984-4: RNCC: 3 | RNVC: 2
852984-1: RNCC: C | RNVC: 1

22 Oct 1988

3040-01-286-7915
Rigid Connecting Link

012867915
AM-10: RNCC: 3 | RNVC: 2
4900035: RNCC: 5 | RNVC: 2
4900035: RNCC: 5 | RNVC: 9

8 Oct 1988

3040-01-290-1436
Hose Reel Brake Wheel Assembly

012901436
9914.0210: RNCC: 3 | RNVC: 2
IS0-35-13: RNCC: 5 | RNVC: 9

7 Dec 1988

3040-01-290-4963
Shouldered Shaft

012904963
6887892-12: RNCC: 3 | RNVC: 2

12 Dec 1988

3040-01-290-7325
Parking Brake Strut

012907325
804AS152-1L: RNCC: 3 | RNVC: 2

15 Dec 1988

3040-01-290-7374
Remote Control Lever

012907374
949124-101: RNCC: 3 | RNVC: 2
949124-101: RNCC: 5 | RNVC: 2
949124: RNCC: D | RNVC: 9

15 Dec 1988

3040-01-291-2621
Manual Control Lever

012912621
B40013: RNCC: 3 | RNVC: 2
02183100: RNCC: 3 | RNVC: 2
8524624: RNCC: 7 | RNVC: 2

24 Dec 1988

3040-01-292-8497
Push-Pull Control Assembly

012928497
CCX63314: RNCC: 3 | RNVC: 2
301947-003-14FT: RNCC: 5 | RNVC: 2
301947-003-14FT: RNCC: 5 | RNVC: 9
301947-003-14FT: RNCC: 5 | RNVC: 9
301947-003-168: RNCC: C | RNVC: 1
D301947-003-168: RNCC: C | RNVC: 1

23 Jan 1989

3040-01-296-0524
Spindle Hydraulic

012960524
308-3802: RNCC: 3 | RNVC: 2
10524112: RNCC: 5 | RNVC: 2
308-3802: RNCC: 5 | RNVC: 9

16 Mar 1989

3040-01-296-2535
Shaft Retaining Plate

012962535
5266220: RNCC: 3 | RNVC: 2

17 Mar 1989

3040-01-296-9344
Outboard Shaft Adapter

012969344
5210374: RNCC: 3 | RNVC: 2

25 Mar 1989

3040-01-296-9748
Shouldered Shaft

012969748
13510-1: RNCC: 3 | RNVC: 2

26 Mar 1989

3040-01-297-4695
Shaft Collar

012974695
10519104: RNCC: 3 | RNVC: 2

4 Apr 1989

3040-01-297-5597
Rigid Connecting Link

012975597
5186908: RNCC: 3 | RNVC: 2
5186908: RNCC: 5 | RNVC: 2
5186908: RNCC: 5 | RNVC: 9

4 Apr 1989

3040-01-298-4530
Bevel Gearshaft

012984530
10029028: RNCC: 3 | RNVC: 2

16 Apr 1989

3040-01-299-1574
Rigid Connecting Link

012991574
65411-02466-044: RNCC: 3 | RNVC: 2

26 Apr 1989

3040-01-301-9962
Mechanical Drive Housing

013019962
124 270 01 11: RNCC: 3 | RNVC: 2
94290-991: RNCC: 3 | RNVC: 9
124 270 01 11: RNCC: 5 | RNVC: 9
4538742-693: RNCC: 5 | RNVC: 9

7 Jun 1989

3040-01-301-2861
Rigid Connecting Link

013012861
374536-7: RNCC: 3 | RNVC: 2
374536-7: RNCC: 5 | RNVC: 2
374536-7: RNCC: 5 | RNVC: 9

26 May 1989

3040-01-301-0312
Rigid Connecting Link

013010312
L5337809-011: RNCC: 3 | RNVC: 2

23 May 1989

3040-01-303-4282
Linear Actuating Cylinder Assembly

013034282
GG122908F0: RNCC: 3 | RNVC: 2

30 Jun 1989

3040-01-303-6429
Manual Control Lever

013036429
5185877: RNCC: 3 | RNVC: 2

4 Jul 1989

3040-01-305-9855
Shouldered Shaft

013059855
726-074-001: RNCC: 3 | RNVC: 2
726-074-001: RNCC: 5 | RNVC: 1

15 Aug 1989

3040-01-308-1621
Straight Axle

013081621
5383509: RNCC: 3 | RNVC: 2

22 Sep 1989

3040-01-308-4508
Rigid Connecting Link

013084508
116038-10: RNCC: 3 | RNVC: 2

29 Sep 1989

3040-01-309-0821
Straight Shaft

013090821
12358394: RNCC: 3 | RNVC: 2
10085882: RNCC: 6 | RNVC: 9

11 Oct 1989

3040-01-310-1760
Shaft Collar

013101760
050532: RNCC: 3 | RNVC: 2
50532: RNCC: 5 | RNVC: 9

31 Oct 1989

3040-01-311-5089
Mechanical Drive Housing

013115089
10029093: RNCC: 3 | RNVC: 2
10029093-1: RNCC: 5 | RNVC: 9

29 Nov 1989

3040-01-312-4235
Linear Actuating Cylinder Assembly

013124235
GG122908K0: RNCC: 3 | RNVC: 2

15 Dec 1989

3040-01-312-4237
Linear Actuating Cylinder Assembly

013124237
1H2H0A00270353: RNCC: 3 | RNVC: 2
GG122908G0: RNCC: 5 | RNVC: 9

15 Dec 1989

3040-01-312-9196
Manual Control Lever

013129196
711196K01: RNCC: 3 | RNVC: 2
711196-K1: RNCC: 5 | RNVC: 9
711196-K1: RNCC: 5 | RNVC: 9

26 Dec 1989

3040-01-313-2060
Manual Control Lever

013132060
EL010-53420: RNCC: 3 | RNVC: 2
EL010-53420: RNCC: 5 | RNVC: 9

3 Jan 1990

3040-01-313-5471
Brake Disc

013135471
25809: RNCC: 3 | RNVC: 9

11 Jan 1990

3040-01-313-5476
Manual Control Lever

013135476
5978900: RNCC: 3 | RNVC: 2

11 Jan 1990

3040-01-314-6488
Pawl

013146488
R801700: RNCC: 3 | RNVC: 2
6HR798: RNCC: 5 | RNVC: 2
A1-1199-S-3737: RNCC: 5 | RNVC: 9
2FR694: RNCC: 5 | RNVC: 9
6HR798: RNCC: 5 | RNVC: 9
A1-2297-M-6461: RNCC: 5 | RNVC: 9
A-2297-E-5439: RNCC: 5 | RNVC: 9

2 Feb 1990

3040-01-313-8073
Rigid Connecting Link

013138073
12313637: RNCC: 3 | RNVC: 2

18 Jan 1990

3040-01-315-2642
Linear Actuating Cylinder Piston Rod

013152642
17937: RNCC: 3 | RNVC: 9
17938: RNCC: D | RNVC: 9

13 Feb 1990

3040-01-315-6715
Mechanical Drive Housing

013156715
2FP75: RNCC: 3 | RNVC: 2
23046556: RNCC: 3 | RNVC: 2
2FP75: RNCC: 5 | RNVC: 9

22 Feb 1990

3040-01-316-0135
Shouldered Shaft

013160135
31772904: RNCC: 3 | RNVC: 2
31772904: RNCC: 5 | RNVC: 9

1 Mar 1990

3040-01-252-0505
Friction Lining

012520505
29-29: RNCC: 3 | RNVC: 2
9240-032-29: RNCC: C | RNVC: 1

29 Mar 1987

3040-01-252-8444
Straight Shaft

012528444
A3-40: RNCC: 3 | RNVC: 2
SS139: RNCC: 3 | RNVC: 2
G4-32: RNCC: 5 | RNVC: 2
7X1-08-40: RNCC: 5 | RNVC: 2
S4-40: RNCC: 5 | RNVC: 9
AAS-A4-25: RNCC: 5 | RNVC: 9
728: RNCC: 5 | RNVC: 9

8 Apr 1987

3040-01-252-8298
Flexible Shaft Assembly Casing

012528298
75A314193-1001: RNCC: 3 | RNVC: 2

8 Apr 1987

3040-01-255-3654
Rigid Connecting Link

012553654
213-328: RNCC: 3 | RNVC: 9
5944390: RNCC: 5 | RNVC: 2
213-328A: RNCC: 5 | RNVC: 9

19 May 1987

3040-01-256-3662
Spur Gearshaft

012563662
MB4202-1 PIECE 81,82: RNCC: 3 | RNVC: 2
4L87: RNCC: 5 | RNVC: 2
MB4202-1 PIECE 81,82: RNCC: 5 | RNVC: 9
4L87: RNCC: 5 | RNVC: 9
MB4202-1: RNCC: D | RNVC: 9

4 Jun 1987

3040-01-256-3712
Flexible Shaft Assembly Core

012563712
57353-150: RNCC: 3 | RNVC: 2

4 Jun 1987

3040-01-256-7956
Worm Shaft

012567956
75D131031-2001: RNCC: 3 | RNVC: 2

9 Jun 1987

3040-01-256-8383
Bell Crank

012568383
75A612307-1001: RNCC: 3 | RNVC: 2

9 Jun 1987

3040-01-257-2760
Shouldered Shaft

012572760
157D3078: RNCC: 3 | RNVC: 2

16 Jun 1987

3040-01-257-8545
Brake Backing Plate

012578545
8-076-206-00: RNCC: 3 | RNVC: 2
8-076-206: RNCC: 5 | RNVC: 9

25 Jun 1987

3040-01-258-9488
Shaft Retaining Plate

012589488
2051G97-001: RNCC: 3 | RNVC: 2
2051G97-001: RNCC: 5 | RNVC: 9
2051G97: RNCC: D | RNVC: 9

10 Jul 1987

3040-01-259-0663
Bell Crank

012590663
L5235017-001: RNCC: 3 | RNVC: 2
L5235017-001: RNCC: 5 | RNVC: 2
L5235017-001: RNCC: 5 | RNVC: 2
L5235017-001: RNCC: 5 | RNVC: 9
L5235017-001: RNCC: C | RNVC: 1

11 Jul 1987

3040-01-259-2382
Remote Control Lever

012592382
90-5: RNCC: 3 | RNVC: 9
90-5: RNCC: 5 | RNVC: 2
PB-662J ITEM 5: RNCC: 5 | RNVC: 9
PB-662K ITEM 5: RNCC: 5 | RNVC: 9

14 Jul 1987

3040-01-259-7390
Union

012597390
198011: RNCC: 3 | RNVC: 2

22 Jul 1987

3040-01-264-8407
Linear Actuating Cylinder Assembly Parts Kit

012648407
C553171: RNCC: 3 | RNVC: 2
333840: RNCC: 5 | RNVC: 2
333840: RNCC: 5 | RNVC: 9

6 Oct 1987

3040-01-259-7622
Remote Control Lever

012597622
71-79B: RNCC: 3 | RNVC: 9
71-79B: RNCC: 5 | RNVC: 2
71-79B: RNCC: 5 | RNVC: 9
3040PL0811796: RNCC: 6 | RNVC: 9

22 Jul 1987

3040-01-264-9132
Manual Control Lever

012649132
75A22004-031: RNCC: 3 | RNVC: 2

8 Oct 1987

3040-01-264-9938
Bell Crank

012649938
L5235017-002: RNCC: 3 | RNVC: 2
L5235017-002: RNCC: 5 | RNVC: 2
L5235017-002: RNCC: 5 | RNVC: 2

8 Oct 1987

3040-01-265-6102
Rigid Connecting Link

012656102
55401-40075: RNCC: 3 | RNVC: 2

17 Oct 1987

3040-01-266-1004
Rigid Connecting Link

012661004
65662-03402-052: RNCC: 3 | RNVC: 2

20 Oct 1987

3040-01-267-2338
Vane Actuation Slot Loaded Bearing Arm

012672338
1286M46G01: RNCC: 3 | RNVC: 2
1286M46G01: RNCC: 5 | RNVC: 2
9526M32G02: RNCC: E | RNVC: 8
1277M86G01: RNCC: E | RNVC: 8
1277M86G02: RNCC: E | RNVC: 8

7 Nov 1987

3040-01-267-3304
Spur Gearshaft

012673304
RG36987: RNCC: 3 | RNVC: 2
10106996: RNCC: 6 | RNVC: 9

9 Nov 1987

3040-01-267-3570
Rigid Connecting Link

012673570
3930AS275-1: RNCC: 3 | RNVC: 2
74A733124-2001: RNCC: 5 | RNVC: 9
74A733124-2001: RNCC: 5 | RNVC: 9
74A733124-2001: RNCC: 5 | RNVC: 9
74A733124-2001: RNCC: 5 | RNVC: 9
10106998: RNCC: 6 | RNVC: 9
3930AS275-1: RNCC: C | RNVC: 1

10 Nov 1987

3040-01-268-5341
Straight Shaft

012685341
4849918-2: RNCC: 3 | RNVC: 2
4849911 PIECE 3: RNCC: 5 | RNVC: 2
4849911 PIECE 3: RNCC: 5 | RNVC: 2
4849911 PIECE 3: RNCC: 5 | RNVC: 9
4849918: RNCC: D | RNVC: 9
4849911: RNCC: D | RNVC: 9

2 Dec 1987

3040-01-261-6232
Shouldered Shaft

012616232
202109-301: RNCC: 3 | RNVC: 9

16 Aug 1987

3040-01-261-9807
Linear Actuating Cylinder Assembly

012619807
46-1452: RNCC: 3 | RNVC: 2

20 Aug 1987

3040-01-262-5286
Shaft Retaining Plate

012625286
75D110041-2011: RNCC: 3 | RNVC: 2
75D110041-2011: RNCC: 5 | RNVC: 9
75D110041-2011: RNCC: 5 | RNVC: 9
75D110041: RNCC: D | RNVC: 9

30 Aug 1987

3040-01-262-7594
Linear Actuating Cylinder Assembly Parts Kit

012627594
DH24-112: RNCC: 3 | RNVC: 2
7091006: RNCC: D | RNVC: 9

3 Sep 1987

3040-01-263-0789
Rigid Connecting Link

012630789
413-10644-1: RNCC: 3 | RNVC: 2

9 Sep 1987

3040-01-263-2529
Bell Crank

012632529
F413-11029-1: RNCC: 3 | RNVC: 2

11 Sep 1987

3040-01-262-8439
Linear Actuating Cylinder Assembly

012628439
7P30600B29623: RNCC: 3 | RNVC: 2
577L913-001: RNCC: 5 | RNVC: 2
577L913-001: RNCC: 5 | RNVC: 9
545950: RNCC: C | RNVC: 1
577L913: RNCC: D | RNVC: 9

4 Sep 1987

3040-01-263-3235
Push-Pull Control Assembly

012633235
709 1034: RNCC: 3 | RNVC: 2
304241-002-138: RNCC: 5 | RNVC: 2

12 Sep 1987

3040-01-263-3243
Body Hub

012633243
3905306: RNCC: 3 | RNVC: 2

12 Sep 1987

3040-01-263-7269
Rigid Connecting Link

012637269
381298: RNCC: 3 | RNVC: 2
381298: RNCC: 5 | RNVC: 9

17 Sep 1987

3040-01-263-9534
Linear Actuating Cylinder Assembly

012639534
PF41037-500: RNCC: 3 | RNVC: 2
P-84445: RNCC: 3 | RNVC: 2
P-84445: RNCC: 5 | RNVC: 9
PF41037: RNCC: D | RNVC: 9

22 Sep 1987

3040-01-263-7238
Linear Actuating Cylinder Assembly

012637238
709 1006: RNCC: 3 | RNVC: 2
709 1006: RNCC: 5 | RNVC: 9
709 1006: RNCC: 5 | RNVC: 9

17 Sep 1987

3040-01-264-4028
Air Clutch Outer Shaft End Cap

012644028
4684680: RNCC: 3 | RNVC: 2

30 Sep 1987

3040-01-269-6692
Worm Shaft

012696692
60-501-0014-2: RNCC: 3 | RNVC: 2

18 Dec 1987

3040-01-269-6639
Shouldered Shaft

012696639
5905579: RNCC: 3 | RNVC: 2

18 Dec 1987

3040-01-270-5733
Flexible Shaft Assembly

012705733
4C92005-101A: RNCC: 3 | RNVC: 2
FAUSG11TZ1: RNCC: 5 | RNVC: 2
18599Y-35: RNCC: 5 | RNVC: 9
18599Y-35: RNCC: 5 | RNVC: 9

9 Jan 1988

3040-01-270-9407
Shouldered Shaft

012709407
8922666: RNCC: 3 | RNVC: 2
015830T: RNCC: 5 | RNVC: 2
019-00001-233: RNCC: 5 | RNVC: 2
K-8922666: RNCC: 5 | RNVC: 2
K-8922666: RNCC: 5 | RNVC: 9
K-8922666: RNCC: 5 | RNVC: 9

15 Jan 1988

3040-01-270-6471
Shaft Retaining Plate

012706471
4667051 PART 2: RNCC: 3 | RNVC: 2
4667051: RNCC: D | RNVC: 9

11 Jan 1988

3040-01-271-0370
Manual Control Lever

012710370
12359273: RNCC: 3 | RNVC: 2

16 Jan 1988

3040-01-271-3636
Rigid Connecting Link

012713636
240883: RNCC: 3 | RNVC: 2
240883: RNCC: 5 | RNVC: 2

23 Jan 1988

3040-01-271-3649
Shouldered Shaft

012713649
ERS-62638: RNCC: 3 | RNVC: 2
ERS62638: RNCC: 5 | RNVC: 2
20510093-21Z: RNCC: 5 | RNVC: 2
ERS62638: RNCC: 5 | RNVC: 9
20511331Z: RNCC: 5 | RNVC: 9
20510093-21Z: RNCC: 5 | RNVC: 9
20510093: RNCC: D | RNVC: 9

23 Jan 1988

3040-01-271-5467
Shouldered Shaft

012715467
68A450920-2001: RNCC: 3 | RNVC: 2
68A450920-2001: RNCC: 5 | RNVC: 2
68A450920-2001: RNCC: 5 | RNVC: 2
68A450920-2001: RNCC: 5 | RNVC: 9
68A450920-2001: RNCC: 5 | RNVC: 9
68A450920-2001: RNCC: 5 | RNVC: 9
68A450920-2001: RNCC: C | RNVC: 1

27 Jan 1988

3040-01-271-9251
Straight Shaft

012719251
5893790: RNCC: 3 | RNVC: 2

2 Feb 1988

3040-01-271-9252
Thrust Shoe

012719252
15 75-8987-2: RNCC: 3 | RNVC: 2
468987 PIECE 2: RNCC: 5 | RNVC: 2

2 Feb 1988

3040-01-272-0969
Straight Shaft

012720969
9376099: RNCC: 3 | RNVC: 2

4 Feb 1988

3040-01-272-1290
Control Cam

012721290
153C7048P2: RNCC: 3 | RNVC: 2
153C7048P2: RNCC: 5 | RNVC: 2
10107001: RNCC: 6 | RNVC: 9

4 Feb 1988

3040-01-273-3354
Straight Shaft

012733354
2041829-3: RNCC: 3 | RNVC: 2
2041829-3: RNCC: 5 | RNVC: 9

24 Feb 1988

3040-01-273-6032
Hub Clamp

012736032
8579196: RNCC: 3 | RNVC: 2

27 Feb 1988

3040-01-278-2199
Control Cam

012782199
4009G88-17: RNCC: 3 | RNVC: 2
4009G88-017: RNCC: 3 | RNVC: 9
958E350 ITEM 37: RNCC: 5 | RNVC: 2
4009G88-17: RNCC: 5 | RNVC: 9
4009G88-017: RNCC: 5 | RNVC: 9
4009G88-017: RNCC: 5 | RNVC: 9

3 May 1988

3040-01-278-3610
Shouldered Shaft

012783610
4F59362-101A: RNCC: 3 | RNVC: 9
4F59362-101A: RNCC: 5 | RNVC: 9
4F59362: RNCC: D | RNVC: 9

4 May 1988

3040-01-279-5718
Remote Control Lever

012795718
4G42006-105A: RNCC: 3 | RNVC: 2
4G42006: RNCC: D | RNVC: 9

21 May 1988

3040-01-280-4970
Bevel Gearshaft

012804970
6289621: RNCC: 3 | RNVC: 2
6289621: RNCC: 5 | RNVC: 1
6289621: RNCC: 5 | RNVC: 9

11 Jun 1988

3040-01-280-9018
Spur Gearshaft

012809018
709-5486674 ITEM 7: RNCC: 3 | RNVC: 2
5486674-0025: RNCC: 5 | RNVC: 2
5486674 ITEM 7: RNCC: 5 | RNVC: 9
709-5486674: RNCC: D | RNVC: 9

14 Jun 1988

3040-01-281-1100
Linear Actuating Cylinder Assembly

012811100
G109823: RNCC: 3 | RNVC: 2

17 Jun 1988

3040-01-281-5919
Disk Brake Shoe

012815919
536464: RNCC: 3 | RNVC: 2

28 Jun 1988

3040-01-279-8984
Flexible Shaft Assembly

012798984
3501595-5: RNCC: 3 | RNVC: 2
10173591: RNCC: 6 | RNVC: 9

26 May 1988

3040-01-281-5941
Impingement Bar Holder

012815941
EW-15E: RNCC: 3 | RNVC: 2
EW-2300J PIECE 638: RNCC: 5 | RNVC: 2

28 Jun 1988

3040-01-281-6852
Worm Shaft

012816852
12599217: RNCC: 3 | RNVC: 2

29 Jun 1988

3040-01-282-6581
Bell Crank

012826581
1500AS211-1: RNCC: 3 | RNVC: 2

20 Jul 1988

3040-01-283-4893
Manual Control Lever

012834893
B40010: RNCC: 3 | RNVC: 2
MB40010: RNCC: 5 | RNVC: 2
013092-00A0: RNCC: 5 | RNVC: 9

6 Aug 1988

3040-01-283-6034
Linear Actuating Cylinder

012836034
65106-11501-103: RNCC: 3 | RNVC: 2
65106-11501-103: RNCC: 5 | RNVC: 9
65106-11501: RNCC: D | RNVC: 9

9 Aug 1988

3040-01-284-4892
Shouldered Shaft

012844892
507235: RNCC: 3 | RNVC: 9
534989: RNCC: 5 | RNVC: 9
507235: RNCC: 5 | RNVC: 9
SH-5139 DETAIL 70: RNCC: 5 | RNVC: 9

24 Aug 1988

3040-01-284-6354
Pawl

012846354
152D5348: RNCC: 3 | RNVC: 2

21 Jul 2017

3040-01-284-6931
Helix Cable Connector

012846931
57357-02: RNCC: 3 | RNVC: 2
57357-2: RNCC: 5 | RNVC: 2
POD-57357-2: RNCC: 5 | RNVC: 2

29 Aug 1988

3040-01-284-5194
Shouldered Shaft

012845194
10252066-3: RNCC: 3 | RNVC: 2
10252066-3: RNCC: 5 | RNVC: 2
10252066-3: RNCC: 5 | RNVC: 9
10252066-3: RNCC: 5 | RNVC: 9
10252066-3: RNCC: 5 | RNVC: 9

25 Aug 1988

3040-01-284-6230
Ball Joint

012846230
12363293: RNCC: 3 | RNVC: 2
10718: RNCC: 5 | RNVC: 9

26 Aug 1988

3040-01-286-2710
Shouldered Shaft

012862710
11450112-1: RNCC: 3 | RNVC: 2
11450112-1: RNCC: 5 | RNVC: 1

29 Sep 1988

3040-01-286-7625
Shouldered Shaft

012867625
A1053A158-1: RNCC: 3 | RNVC: 2

8 Oct 1988

3040-01-287-7909
Linear Actuating Cylinder Assembly

012877909
NA-9073: RNCC: 3 | RNVC: 9
1592130: RNCC: 5 | RNVC: 2
1592130: RNCC: 7 | RNVC: 9

27 Oct 1988

3040-01-289-1076
Manual Control Lever

012891076
32A9569X02: RNCC: 3 | RNVC: 2
32A9569X012: RNCC: C | RNVC: 1

17 Nov 1988

3040-01-289-3921
Push-Pull Control Assembly

012893921
32377-003-0072.0: RNCC: 3 | RNVC: 2
32377L06: RNCC: 5 | RNVC: 2
032377-3-72: RNCC: 5 | RNVC: 9
32377-003-0072.0: RNCC: 5 | RNVC: 9
32377-003-6FT: RNCC: 5 | RNVC: 9
33C X 6FT: RNCC: C | RNVC: 1

22 Nov 1988

3040-01-289-4688
Remote Control Lever

012894688
70400-02219-042: RNCC: 3 | RNVC: 2

23 Nov 1988

3040-01-293-1375
Shouldered Shaft

012931375
109-218-080-420-003: RNCC: 3 | RNVC: 2
11-1000 PIECE 16E: RNCC: 5 | RNVC: 2
218-080-420-003: RNCC: 5 | RNVC: 9
11-1000: RNCC: D | RNVC: 9

27 Jan 1989

3040-01-293-2865
Flexible Shaft Assembly

012932865
L118511: RNCC: 3 | RNVC: 2
L74736: RNCC: 5 | RNVC: 9

30 Jan 1989

3040-01-290-1083
Control Cam

012901083
104B5003-1: RNCC: 3 | RNVC: 2
104B5005-1: RNCC: 5 | RNVC: 9
104B5005: RNCC: D | RNVC: 9

6 Dec 1988

3040-01-293-6061
Rigid Connecting Link

012936061
12358607: RNCC: 3 | RNVC: 2
12358607: RNCC: 3 | RNVC: 2
12358607: RNCC: 5 | RNVC: 2

3 Feb 1989

3040-01-294-2110
Shaft Retaining Plate

012942110
12909140: RNCC: 3 | RNVC: 2

12 Feb 1989

3040-01-294-2476
Accumulator Cap

012942476
4457741: RNCC: 3 | RNVC: 2
4457741 PIECE 12: RNCC: 3 | RNVC: 2
845-4457741 PIECE 12: RNCC: 5 | RNVC: 1
2300-578 PIECE 12: RNCC: 5 | RNVC: 2

14 Feb 1989

3040-01-295-5068
Friction Lining

012955068
1985235: RNCC: 3 | RNVC: 2
1985235: RNCC: 5 | RNVC: 2
1985235: RNCC: 5 | RNVC: 9

7 Mar 1989

3040-01-297-0030
Rigid Connecting Link

012970030
DA606-6: RNCC: 3 | RNVC: 2
T792: RNCC: D | RNVC: 9

27 Mar 1989

3040-01-297-0672
Hydraulic Accumulator Piston Rod

012970672
10524187: RNCC: 3 | RNVC: 2
345-4771: RNCC: 5 | RNVC: 9

28 Mar 1989

3040-01-297-5600
Shaft Retaining Plate

012975600
5599973-1: RNCC: 3 | RNVC: 2
5599973-1: RNCC: 5 | RNVC: 2
5599973: RNCC: D | RNVC: 9

4 Apr 1989

3040-01-298-2939
Linear Actuating Cylinder Assembly

012982939
GG123543D0: RNCC: 3 | RNVC: 2

14 Apr 1989

3040-01-298-6644
Shaft Collar

012986644
51601: RNCC: 3 | RNVC: 9

19 Apr 1989

3040-01-298-8643
Shouldered Shaft

012988643
NMP-1523 PIECE 34: RNCC: 3 | RNVC: 2
NMP-1523 PIECE 34: RNCC: 5 | RNVC: 9
NMP-1523 PIECE 34: RNCC: 5 | RNVC: 9

22 Apr 1989

3040-01-299-3506
Shouldered Shaft

012993506
10029127: RNCC: 3 | RNVC: 2

30 Apr 1989

3040-01-300-3935
Disk Brake Shoe

013003935
5020-0005 ITEM 5: RNCC: 3 | RNVC: 2

14 May 1989

3040-01-300-0152
Linear Actuating Cylinder Assembly Parts Kit

013000152
639572: RNCC: 3 | RNVC: 2
RK492900: RNCC: 5 | RNVC: 9
15862: RNCC: 5 | RNVC: 9
492900RK20TR: RNCC: 5 | RNVC: 9
637401-RK20TR: RNCC: C | RNVC: 1
492900: RNCC: C | RNVC: 1

9 May 1989

3040-01-301-2260
Hub Clamp

013012260
J49F0032-2: RNCC: 3 | RNVC: 2
J49F0032-2: RNCC: 3 | RNVC: 9

25 May 1989

3040-01-301-3379
Straight Axle

013013379
ES1576: RNCC: 3 | RNVC: 2
ES1576: RNCC: 3 | RNVC: 9
ES1576: RNCC: 5 | RNVC: 2
ES1576: RNCC: 5 | RNVC: 9

27 May 1989

3040-01-300-9199
Rigid Connecting Link

013009199
4C63118-103B: RNCC: 3 | RNVC: 2

20 May 1989

3040-01-301-9989
Rigid Connecting Link

013019989
935AS114-1: RNCC: 3 | RNVC: 9
935AS114-1: RNCC: 5 | RNVC: 2

7 Jun 1989

3040-01-300-8066
Shouldered Shaft

013008066
9-65168-3: RNCC: 3 | RNVC: 2

18 May 1989

3040-01-303-1340
Mechanical Drive Housing

013031340
12577084: RNCC: 3 | RNVC: 2
K-108: RNCC: 5 | RNVC: 2
K-108: RNCC: 5 | RNVC: 9
K-108: RNCC: 5 | RNVC: 9
12577084: RNCC: 5 | RNVC: 9

24 Jun 1989

3040-01-303-7978
Push-Pull Control Assembly

013037978
580-530-011: RNCC: 3 | RNVC: 2

6 Jul 1989

3040-01-303-7985
Rigid Connecting Link

013037985
4906-189: RNCC: 3 | RNVC: 2

6 Jul 1989

3040-01-303-8224
Push-Pull Control Assembly

013038224
5010973: RNCC: 3 | RNVC: 2
5010973: RNCC: 5 | RNVC: 9

6 Jul 1989

3040-01-305-5847
Control Cam

013055847
537-293-320-777-002: RNCC: 3 | RNVC: 2
D777-151-061 ITEM 83: RNCC: 5 | RNVC: 2
D151-161 ITEM 82: RNCC: 5 | RNVC: 9
D777-151-061: RNCC: D | RNVC: 9

8 Aug 1989

3040-01-306-6974
Pawl

013066974
16S1533-11: RNCC: 3 | RNVC: 2
16S1533-9: RNCC: 5 | RNVC: 9

29 Aug 1989

3040-01-308-4458
Shouldered Shaft

013084458
2351W128: RNCC: 3 | RNVC: 2

29 Sep 1989

3040-01-308-8306
Shouldered Shaft

013088306
99057P021: RNCC: 3 | RNVC: 2
00188 ITEM 212: RNCC: 5 | RNVC: 2
00057P021: RNCC: 5 | RNVC: 9

5 Oct 1989

3040-01-309-0979
Brake Shoe

013090979
MK44-610-5/15: RNCC: 3 | RNVC: 2
1327196: RNCC: 5 | RNVC: 2
380768: RNCC: 5 | RNVC: 9
1327196: RNCC: 5 | RNVC: 9
MK44-610-5/15: RNCC: 5 | RNVC: 9

11 Oct 1989

3040-01-309-8192
Nonrotating Shaft Eye Bracket

013098192
23105: RNCC: 3 | RNVC: 2
23105: RNCC: 3 | RNVC: 9
PG-9001 ITEM 102: RNCC: 5 | RNVC: 9

24 Oct 1989

3040-01-310-0122
Mechanical Drive Housing

013100122
2C1-01364: RNCC: 3 | RNVC: 2
2C1-1364: RNCC: 5 | RNVC: 2

27 Oct 1989

3040-01-310-4448
Breather

013104448
A4067682 BA.375 MICRO: RNCC: 3 | RNVC: 2
A4067682 BA 375: RNCC: C | RNVC: 1

4 Nov 1989

3040-01-310-4839
Remote Control Lever

013104839
419 550 76 13: RNCC: 3 | RNVC: 2

4 Nov 1989

3040-01-312-1046
Nonrotating Shaft Eye Bracket

013121046
12367409: RNCC: 3 | RNVC: 2
12367409: RNCC: 5 | RNVC: 2
12367409: RNCC: 5 | RNVC: 2
10085883: RNCC: 6 | RNVC: 9

10 Dec 1989

3040-01-312-2027
Push-Pull Control Assembly

013122027
32377-003-144: RNCC: 3 | RNVC: 2
032377-003-12FT: RNCC: 5 | RNVC: 9
D065870-003-0144.0: RNCC: 5 | RNVC: 9
32377-003-144: RNCC: 5 | RNVC: 9
13MPE-201-015, PC. 4: RNCC: C | RNVC: 1

12 Dec 1989

3040-01-312-5661
Shouldered Shaft

013125661
656Q0021F060A: RNCC: 3 | RNVC: 2
LM633 PC 8: RNCC: 5 | RNVC: 9

18 Dec 1989

3040-01-312-6327
Shouldered Axle

013126327
12900963: RNCC: 3 | RNVC: 2
189-621: RNCC: 5 | RNVC: 2
189-621: RNCC: 5 | RNVC: 9
189-621: RNCC: 5 | RNVC: 9

20 Dec 1989

3040-01-313-4088
Brake Shoe

013134088
414594: RNCC: 3 | RNVC: 2
406165: RNCC: 3 | RNVC: 9

8 Jan 1990

3040-01-314-4406
Control Cam

013144406
2300-2336 ITEM 16: RNCC: 3 | RNVC: 2
1042-006 ITEM 16: RNCC: 5 | RNVC: 2
1042-006 ITEM 16: RNCC: 5 | RNVC: 9
2300-2336 ITEM 16: RNCC: 5 | RNVC: 9

30 Jan 1990

3040-01-274-0453
Shouldered Shaft

012740453
60-306-0013-2: RNCC: 3 | RNVC: 2
01-435-0365-4 PIECE 56: RNCC: D | RNVC: 9

4 Mar 1988

3040-01-275-0203
Double Ball Joint

012750203
SAW-12750203: RNCC: 3 | RNVC: 2
150-2044: RNCC: 5 | RNVC: 9

17 Mar 1988

3040-01-276-5147
Linear Actuating Cylinder Assembly

012765147
TG10EAGAXFAG6203: RNCC: 3 | RNVC: 2
GT10EAGAXXAG6203: RNCC: 5 | RNVC: 9
5122919-002-101: RNCC: 7 | RNVC: 2

9 Apr 1988

3040-01-276-9815
Straight Shaft

012769815
4C22222-103A: RNCC: 3 | RNVC: 9
4C22222-103A: RNCC: 5 | RNVC: 9

16 Apr 1988

3040-01-277-9090
Shaft Collar

012779090
A-12117: RNCC: 3 | RNVC: 2

29 Apr 1988

3040-01-290-1377
Shouldered Shaft

012901377
350365: RNCC: 3 | RNVC: 2
350365: RNCC: 5 | RNVC: 9
3040PL1393719: RNCC: 6 | RNVC: 9
3152246: RNCC: D | RNVC: 9

7 Dec 1988

3040-01-263-7236
Linear Actuating Cylinder

012637236
DHA1-274: RNCC: 3 | RNVC: 9
DHA1-274: RNCC: 5 | RNVC: 9
7091006: RNCC: D | RNVC: 9

17 Sep 1987

3040-01-308-0080
Shouldered Shaft

013080080
40A629: RNCC: 3 | RNVC: 2
40A629: RNCC: 5 | RNVC: 9
40A629: RNCC: 5 | RNVC: 9
40A629: RNCC: 5 | RNVC: 9

21 Sep 1989

3040-01-252-2510
Shaft Collar

012522510
11442732: RNCC: 3 | RNVC: 2
11442732: RNCC: 5 | RNVC: 1

30 Mar 1987

3040-01-252-8497
Linear Actuating Cylinder Assembly

012528497
TK2521020SA-00: RNCC: 3 | RNVC: 2
TK2521020SA-00: RNCC: 5 | RNVC: 9

8 Apr 1987

3040-01-255-6201
Shouldered Shaft

012556201
903-5912051 PC42: RNCC: 3 | RNVC: 9
903-5912051: RNCC: 5 | RNVC: 9

22 May 1987

3040-01-256-8388
Rigid Connecting Link

012568388
75A353056-1007: RNCC: 3 | RNVC: 2

9 Jun 1987

3040-01-256-8992
Shouldered Shaft

012568992
523-5928040 PC4: RNCC: 3 | RNVC: 2
523-5928040 PC4: RNCC: 5 | RNVC: 2
624D-2055-37 PC 4: RNCC: 5 | RNVC: 9

9 Jun 1987

3040-01-257-4947
Manual Control Lever

012574947
406 260 52 39: RNCC: 3 | RNVC: 2
406 260 52 39: RNCC: 5 | RNVC: 2
406 260 52 39: RNCC: 5 | RNVC: 9
406 260 45 39: RNCC: C | RNVC: 1

19 Jun 1987

3040-01-256-1591
Nonrotating Shaft Eye Bracket

012561591
2901533-1: RNCC: 3 | RNVC: 2

31 May 1987

3040-01-258-9303
Brake Disc

012589303
K080139-006: RNCC: 3 | RNVC: 2
K080139-006: RNCC: 5 | RNVC: 9
K80139-5: RNCC: 5 | RNVC: 9
R80139-6: RNCC: 5 | RNVC: 9
K80139-6: RNCC: 5 | RNVC: 9
3040PL0822954: RNCC: 6 | RNVC: 9
K80139: RNCC: D | RNVC: 9
K80139-006: RNCC: E | RNVC: 8
J80002 PIECE 4: RNCC: E | RNVC: 8

10 Jul 1987

3040-01-259-5594
Pressure Bellows

012595594
810787: RNCC: 3 | RNVC: 2

18 Jul 1987

3040-01-259-5612
Linear Actuating Cylinder Assembly

012595612
39413182: RNCC: 3 | RNVC: 9
39413182: RNCC: 5 | RNVC: 2
581462-008: RNCC: 5 | RNVC: 2
39413182: RNCC: 5 | RNVC: 9
39413182: RNCC: 5 | RNVC: 9
39413182: RNCC: C | RNVC: 1
39413182: RNCC: C | RNVC: 1
39413182: RNCC: C | RNVC: 1

18 Jul 1987

3040-01-264-5736
Remote Control Lever

012645736
50C-0014-0288: RNCC: 3 | RNVC: 2
09-0204: RNCC: 5 | RNVC: 9

2 Oct 1987

3040-01-264-6915
Thrust Shoe

012646915
15 75-9176-1: RNCC: 3 | RNVC: 2
469176 PIECE 1: RNCC: 5 | RNVC: 2

5 Oct 1987

3040-01-266-2095
Linear Actuating Cylinder Assembly Parts Kit

012662095
N5-665-11V: RNCC: 3 | RNVC: 2
22473N PIECE 16: RNCC: 5 | RNVC: 9
N-661-11-V: RNCC: 5 | RNVC: 9
NS-66S: RNCC: 5 | RNVC: 9
N5-665-1VV: RNCC: 5 | RNVC: 9

22 Oct 1987

3040-01-266-1006
Worm Shaft

012661006
75D131023-2001: RNCC: 3 | RNVC: 2

20 Oct 1987

3040-01-268-4876
Shaft Collar

012684876
1591419-1: RNCC: 3 | RNVC: 2
1591419-1: RNCC: 5 | RNVC: 2
1591419-1: RNCC: 5 | RNVC: 9

2 Dec 1987

3040-01-268-5344
Shouldered Shaft

012685344
9904107566: RNCC: 3 | RNVC: 2
9-904-101385: RNCC: 5 | RNVC: 9
231913: RNCC: 5 | RNVC: 9
231913: RNCC: C | RNVC: 1

2 Dec 1987

3040-01-268-7812
Linear Actuating Cylinder

012687812
5210069 PIECE 8: RNCC: 3 | RNVC: 9
5210069 PART 8: RNCC: 5 | RNVC: 2
5210079: RNCC: 5 | RNVC: 9

7 Dec 1987

3040-01-261-0201
Shouldered Shaft

012610201
918: RNCC: 3 | RNVC: 9
C-21783-10: RNCC: 5 | RNVC: 9
C-21783: RNCC: D | RNVC: 9

7 Aug 1987

3040-01-261-2454
Extension Shaft

012612454
12143-102: RNCC: 3 | RNVC: 2
14212-501: RNCC: 5 | RNVC: 9
S14212-501: RNCC: 5 | RNVC: 9

11 Aug 1987

3040-01-261-4012
Shaft Collar

012614012
2007006-1: RNCC: 3 | RNVC: 9
2007006-1: RNCC: 5 | RNVC: 9
3040PL0667948: RNCC: 6 | RNVC: 9
2007006-1: RNCC: C | RNVC: 1
2007006: RNCC: D | RNVC: 9

12 Aug 1987

3040-01-261-9461
Ball Joint

012619461
05.06.055: RNCC: 3 | RNVC: 2
05.06.055: RNCC: 5 | RNVC: 2
05.06.055: RNCC: 5 | RNVC: 9
05.06.055: RNCC: C | RNVC: 1

20 Aug 1987

3040-01-262-1207
Speedometer-Tachometer Drive Adapter

012621207
390761800: RNCC: 3 | RNVC: 2
3907618: RNCC: 5 | RNVC: 9

22 Aug 1987

3040-01-262-2019
Straight Shaft

012622019
6289458: RNCC: 3 | RNVC: 2

25 Aug 1987

3040-01-260-8112
Shouldered Shaft

012608112
202142-301: RNCC: 3 | RNVC: 9

5 Aug 1987

3040-01-263-0085
Remote Control Lever

012630085
1327252 & 1327258 & 190930: RNCC: 3 | RNVC: 2
4150747: RNCC: 3 | RNVC: 9
359001: RNCC: 5 | RNVC: 9
1327252 & 1327258 & 1909301: RNCC: 5 | RNVC: 9

9 Sep 1987

3040-01-263-0759
Rigid Connecting Link

012630759
405-10657-1: RNCC: 3 | RNVC: 2

9 Sep 1987

3040-01-263-0774
Straight Shaft

012630774
413-10707-1: RNCC: 3 | RNVC: 2

9 Sep 1987

3040-01-263-4340
Hydraul Drive Shaft

012634340
SH- 202660: RNCC: 3 | RNVC: 2
SH 202660: RNCC: 5 | RNVC: 9

14 Sep 1987

3040-01-269-0523
Hydraulic Accumulator

012690523
BR20-231: RNCC: 3 | RNVC: 1
BB20-231NAVY: RNCC: 3 | RNVC: 2
BR20-231VM: RNCC: 5 | RNVC: 9

11 Dec 1987

3040-01-270-6470
Shaft Retaining Plate

012706470
4667051 PART 1: RNCC: 3 | RNVC: 2
4667051: RNCC: D | RNVC: 9

11 Jan 1988

3040-01-270-7522
Push-Pull Control Assembly

012707522
12351251: RNCC: 3 | RNVC: 2

13 Jan 1988

3040-01-272-7609
Straight Shaft

012727609
121-218-260-777-004: RNCC: 3 | RNVC: 2
D-777-36 ITEM 17: RNCC: 5 | RNVC: 2

13 Feb 1988

3040-01-272-7717
Mechanical Drive Housing

012727717
60-006-0022-3: RNCC: 3 | RNVC: 2

13 Feb 1988

3040-01-273-2487
Shouldered Shaft

012732487
0388662: RNCC: 3 | RNVC: 2
388662: RNCC: 5 | RNVC: 2
388662: RNCC: 5 | RNVC: 9
0388662: RNCC: 5 | RNVC: 9
0388662: RNCC: 5 | RNVC: 9
388662: RNCC: 5 | RNVC: 9
0388662: RNCC: 5 | RNVC: 9

22 Feb 1988

3040-01-271-9545
Rigid Connecting Link

012719545
12350969-2: RNCC: 3 | RNVC: 2
12350969: RNCC: D | RNVC: 9

2 Feb 1988

3040-01-273-9313
Rigid Connecting Link

012739313
0288.0036.B: RNCC: 3 | RNVC: 2

3 Mar 1988

3040-01-274-6809
Push-Pull Control Assembly

012746809
84-13074: RNCC: 3 | RNVC: 2
345-029-27: RNCC: 5 | RNVC: 2
345-029-27: RNCC: 5 | RNVC: 9

11 Mar 1988

3040-01-274-9944
Clutch Shoe

012749944
S24014: RNCC: 3 | RNVC: 2

17 Mar 1988

3040-01-275-0206
Rigid Connecting Link

012750206
60-503-0004-1: RNCC: 3 | RNVC: 2
01-408-0013-4 PIECE 9: RNCC: 5 | RNVC: 2
01-408-0073-4 PIECE 9: RNCC: 5 | RNVC: 2
01-408-0074-4 PIECE 9: RNCC: 5 | RNVC: 2

17 Mar 1988

3040-01-274-3895
Worm Shaft

012743895
10-2610-1: RNCC: 3 | RNVC: 2

8 Mar 1988

3040-01-275-2512
Brake Disc

012752512
K090107-001: RNCC: 3 | RNVC: 2

19 Mar 1988

3040-01-278-8734
Mechanical Drive Housing

012788734
A28166-001: RNCC: 3 | RNVC: 2
FDE474 PAGE 7 ITEM 23: RNCC: C | RNVC: 1

11 May 1988

3040-01-278-3650
Manual Control Lever

012783650
L103238: RNCC: 3 | RNVC: 2

4 May 1988

3040-01-279-8601
Linear Actuating Cylinder Head

012798601
TG51HL0857: RNCC: 3 | RNVC: 2
TG51HL0857: RNCC: 5 | RNVC: 2
SH-451-K9653: RNCC: 5 | RNVC: 9

26 May 1988

3040-01-280-8620
Body Hub

012808620
47450: RNCC: 3 | RNVC: 2
FC20 SOLID: RNCC: 3 | RNVC: 2

13 Jun 1988

3040-01-281-0844
Linear Actuating Cylinder

012810844
T12619545: RNCC: 3 | RNVC: 2
T12617595: RNCC: 3 | RNVC: 9
T12617595: RNCC: 5 | RNVC: 9

17 Jun 1988

3040-01-281-0854
Shouldered Shaft

012810854
T317143: RNCC: 3 | RNVC: 2
T317143: RNCC: 3 | RNVC: 9

17 Jun 1988

3040-01-281-0883
Control Cam

012810883
T58310: RNCC: 3 | RNVC: 2
T58310: RNCC: 3 | RNVC: 9

17 Jun 1988

3040-01-279-3059
Shaft Collar

012793059
26800315: RNCC: 3 | RNVC: 9
9240-004-16: RNCC: 5 | RNVC: 2
9240-004: RNCC: D | RNVC: 9

16 May 1988

3040-01-281-3628
Remote Control Lever

012813628
64A114C80-8: RNCC: 3 | RNVC: 2

22 Jun 1988

3040-01-282-4263
Linear Actuating Cylinder Head

012824263
DAA3221P601-217: RNCC: 3 | RNVC: 2
DAA3221P601-217: RNCC: 5 | RNVC: 9

15 Jul 1988

3040-01-282-8416
Linear Actuating Cylinder Assembly

012828416
45801: RNCC: 3 | RNVC: 2
45801: RNCC: 3 | RNVC: 9

23 Jul 1988

3040-01-283-1932
Shaft Collar

012831932
F-637-31-2IN-24STEM COLLAR: RNCC: 3 | RNVC: 9
F-637-31-2IN-24STEM: RNCC: 5 | RNVC: 9

30 Jul 1988

3040-01-282-7379
Ball Joint

012827379
115-001: RNCC: 3 | RNVC: 9

21 Jul 1988

3040-01-282-4179
Shouldered Shaft

012824179
EJ21247: RNCC: 3 | RNVC: 2
EJ41136: RNCC: D | RNVC: 9

15 Jul 1988

3040-01-283-6793
Bevel Gearshaft

012836793
157D3510: RNCC: 3 | RNVC: 2

11 Aug 1988

3040-01-284-8507
Remote Control Lever

012848507
219F637: RNCC: 3 | RNVC: 2

1 Sep 1988

3040-01-285-0745
Bevel Gearshaft

012850745
4553743 ITEM 2: RNCC: 3 | RNVC: 2
6110-128 ITEM 2: RNCC: 3 | RNVC: 2
4553743 ITEM 2: RNCC: 5 | RNVC: 9
6110-128 ITEM 2: RNCC: C | RNVC: 1
4553743: RNCC: D | RNVC: 9

6 Sep 1988

3040-01-285-7180
Gearbox Parts Kit

012857180
413-10737-1: RNCC: 3 | RNVC: 2

19 Sep 1988

3040-01-286-0172
Linear Actuating Cylinder Piston Rod

012860172
P96-1: RNCC: 3 | RNVC: 2
3-4130 PIECE 30: RNCC: 5 | RNVC: 2
3-4130: RNCC: D | RNVC: 9

24 Sep 1988

3040-01-286-1148
Spur Gearshaft

012861148
11450142-1: RNCC: 3 | RNVC: 2
11450142-1: RNCC: 5 | RNVC: 1

27 Sep 1988

3040-01-287-4902
Shouldered Shaft

012874902
952537-00: RNCC: 3 | RNVC: 9
95253PH: RNCC: 5 | RNVC: 9
RX-152537: RNCC: 5 | RNVC: 9
RY-181159 ITEM 2: RNCC: 5 | RNVC: 9
952537-00: RNCC: C | RNVC: 1
RY-181159 ITEM 2: RNCC: C | RNVC: 1
952537PH: RNCC: C | RNVC: 1
RX-152537: RNCC: C | RNVC: 1

22 Oct 1988

3040-01-287-8990
Rigid Connecting Link

012878990
1473AS105-1: RNCC: 3 | RNVC: 2
1473AS105-1: RNCC: C | RNVC: 1

28 Oct 1988

3040-01-288-1937
Body Hub

012881937
717512813-001: RNCC: 3 | RNVC: 2
717512813-001: RNCC: 5 | RNVC: 2

3 Nov 1988

3040-01-288-5238
Shouldered Shaft

012885238
12369256: RNCC: 3 | RNVC: 2

9 Nov 1988

3040-01-288-7344
Plate Adapter

012887344
8827-1: RNCC: 3 | RNVC: 2
8827-1: RNCC: 5 | RNVC: 9

13 Nov 1988

3040-01-286-9385
Shouldered Shaft

012869385
853841: RNCC: 3 | RNVC: 2
853841: RNCC: 5 | RNVC: 2
FS0001050: RNCC: 5 | RNVC: 9
853841-5: RNCC: C | RNVC: 1

12 Oct 1988

3040-01-291-0970
Straight Shaft

012910970
A6-SPEC,2 1/4 INCH LONG: RNCC: 3 | RNVC: 2
0851-144: RNCC: 5 | RNVC: 2
0851: RNCC: D | RNVC: 9

22 Dec 1988

3040-01-292-7987
Straight Shaft

012927987
60-306-0021-2: RNCC: 3 | RNVC: 2
01-435-0212-5 PC25: RNCC: 5 | RNVC: 2
D460-306-0021-2: RNCC: 5 | RNVC: 2

22 Jan 1989

3040-01-293-4429
Linear Actuating Cylinder Assembly Parts Kit

012934429
DH24-186: RNCC: 3 | RNVC: 2

3 Feb 1989

3040-01-293-5775
Spur Gearshaft

012935775
110576: RNCC: 3 | RNVC: 2

3 Feb 1989

3040-01-294-3411
Linear Actuating Cylinder Assembly

012943411
8040740: RNCC: 3 | RNVC: 2
A2-3280-P-9818: RNCC: 5 | RNVC: 2
A2-3280-X-8500: RNCC: 5 | RNVC: 9
8040740: RNCC: 5 | RNVC: 9

15 Feb 1989

3040-01-296-0501
Guide

012960501
10560120: RNCC: 3 | RNVC: 2
390-0363: RNCC: 5 | RNVC: 9

16 Mar 1989

3040-01-296-0483
Control Cam

012960483
305-8956: RNCC: 3 | RNVC: 2
10524237: RNCC: 5 | RNVC: 2
305-8956: RNCC: 5 | RNVC: 9

16 Mar 1989

3040-01-297-0660
Shaft Collar

012970660
10519105: RNCC: 3 | RNVC: 2

28 Mar 1989

3040-01-297-1977
Shouldered Shaft

012971977
4001599: RNCC: 3 | RNVC: 2
4001599: RNCC: 5 | RNVC: 9
40A2428: RNCC: 5 | RNVC: 9

30 Mar 1989

3040-01-297-5386
Spur Gearshaft

012975386
810200: RNCC: 3 | RNVC: 9
300297PL FIND 6: RNCC: 5 | RNVC: 9
810200: RNCC: C | RNVC: 1
884010PL FIND 23: RNCC: D | RNVC: 9
300297: RNCC: D | RNVC: 9

4 Apr 1989

3040-01-297-5389
Mechanical Drive Housing

012975389
YZ4101399: RNCC: 3 | RNVC: 2
4001899: RNCC: 5 | RNVC: 9
4101212: RNCC: 5 | RNVC: 9

4 Apr 1989

3040-01-297-5408
Manual Control Lever

012975408
6609273: RNCC: 3 | RNVC: 2
6609273: RNCC: 5 | RNVC: 9

4 Apr 1989

3040-01-298-2944
Linear Actuating Cylinder Assembly

012982944
AG144772C0: RNCC: 3 | RNVC: 2

14 Apr 1989

3040-01-298-8629
Shaft Collar

012988629
NMP-1523 PIECE 32: RNCC: 3 | RNVC: 2
0352000002: RNCC: 5 | RNVC: 2
NMP-1523 PIECE 32: RNCC: 5 | RNVC: 9
NMP-1523 PIECE 32: RNCC: 5 | RNVC: 9

22 Apr 1989

3040-01-299-0483
Valve Post

012990483
5266254: RNCC: 3 | RNVC: 2

24 Apr 1989

3040-01-299-5795
Rigid Connecting Link

012995795
71A160034-1001: RNCC: 3 | RNVC: 2
71A160034: RNCC: D | RNVC: 9

4 May 1989

3040-01-300-5448
Shouldered Shaft

013005448
9-65154-4: RNCC: 3 | RNVC: 2

16 May 1989

3040-01-300-8829
Linear Actuating Cylinder Assembly Parts Kit

013008829
HS12043-A: RNCC: 3 | RNVC: 2
A106668: RNCC: 5 | RNVC: 2

20 May 1989

3040-01-301-9987
Body Hub

013019987
711-4863675 ITEM 21: RNCC: 3 | RNVC: 2
711-4863675: RNCC: D | RNVC: 9

7 Jun 1989

3040-01-301-8941
Spur Gearshaft

013018941
2W6619: RNCC: 3 | RNVC: 2

5 Jun 1989

Load More Results