What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 121 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 121 of 300

3040-01-351-6576
Gearbox Swage Ring

013516576
42312C105: RNCC: 3 | RNVC: 2

14 Jan 1992

3040-01-354-2760
Lock Spindle Assembly

013542760
17P2G5050-503: RNCC: 3 | RNVC: 9
17P2G5050-503: RNCC: 5 | RNVC: 2

26 Feb 1992

3040-01-355-7585
Linear Actuating Cylinder Assembly Parts Kit

013557585
34416: RNCC: 3 | RNVC: 2

23 Mar 1992

3040-01-360-9229
Shouldered Shaft

013609229
5-4-4735: RNCC: 3 | RNVC: 2

4 Jul 1992

3040-01-361-3279
Linear Actuating Cylinder

013613279
1-1/8HHSL4CCVY: RNCC: 3 | RNVC: 2
1-1/SHHSL4CCVY: RNCC: 5 | RNVC: 9
1-1/8HH-A009A: RNCC: 5 | RNVC: 9
SER NO. 1009369: RNCC: 5 | RNVC: 9
1 1/8HHSL4CCAKY: RNCC: 5 | RNVC: 9
1009369-1 1/8HH-A009: RNCC: 5 | RNVC: 9
1 1-8HHSL4CCAKY: RNCC: 5 | RNVC: 9

14 Jul 1992

3040-01-361-8305
Rigid Connecting Link

013618305
835028A0888: RNCC: 3 | RNVC: 2
835028A0888: RNCC: 5 | RNVC: 2
L835028A0888: RNCC: 5 | RNVC: 9

26 Jul 1992

3040-01-362-1951
Push-Pull Control Assembly

013621951
29507766: RNCC: 3 | RNVC: 2
80036760: RNCC: 5 | RNVC: 2
29507766: RNCC: 5 | RNVC: 2
29507766: RNCC: 5 | RNVC: 2
29507766: RNCC: 5 | RNVC: 2
29507766: RNCC: 5 | RNVC: 9
10046147: RNCC: 6 | RNVC: 9

1 Aug 1992

3040-01-361-4963
Brake Disc

013614963
56P40-1600: RNCC: 3 | RNVC: 2
56P40-11 REF 15: RNCC: 5 | RNVC: 2
56P040-1600: RNCC: 5 | RNVC: 2

17 Jul 1992

3040-01-362-7089
Remote Control Lever

013627089
4413-606: RNCC: 3 | RNVC: 2

14 Aug 1992

3040-01-359-8371
Linear Actuating Cylinder Assembly

013598371
S10003408DLAZ: RNCC: 3 | RNVC: 2
8801-009: RNCC: 5 | RNVC: 9
SW24768: RNCC: 7 | RNVC: 2

13 Jun 1992

3040-01-360-4719
Pawl Peg Cushion

013604719
0480B0180: RNCC: 3 | RNVC: 2
0480B0180: RNCC: 5 | RNVC: 9

24 Jun 1992

3040-01-360-6513
Body Hub

013606513
738.06.034.03: RNCC: 3 | RNVC: 2
11206.081.01: RNCC: 5 | RNVC: 2

28 Jun 1992

3040-01-360-6019
Mechanical Drive Housing

013606019
29501360: RNCC: 3 | RNVC: 2
29501360: RNCC: 5 | RNVC: 2
29501360: RNCC: 5 | RNVC: 2
29501360: RNCC: 5 | RNVC: 9
29501360: RNCC: C | RNVC: 1
029122T: RNCC: C | RNVC: 1

28 Jun 1992

3040-01-364-5399
Linear Actuating Cylinder Assembly

013645399
89156909: RNCC: 3 | RNVC: 2
89156909: RNCC: 3 | RNVC: 9
CYSR5000HY84T2B-250-600-100-990: RNCC: 5 | RNVC: 2
CYSR5000HY84T2B-250-600-100-990: RNCC: 5 | RNVC: 9

22 Sep 1992

3040-01-364-6148
Counterbalance Weight

013646148
406-015-106-101: RNCC: 3 | RNVC: 2
406-015-106: RNCC: D | RNVC: 9

22 Sep 1992

3040-01-364-8769
Breather

013648769
PBB-10-5-N: RNCC: 3 | RNVC: 2
PL-2043B-001 ITEM 16: RNCC: 5 | RNVC: 2
6KP107: RNCC: C | RNVC: 1
5257-040: RNCC: C | RNVC: 1
PL-2043B-001: RNCC: D | RNVC: 9

27 Sep 1992

3040-01-364-8894
Rigid Connecting Link

013648894
MBEU147771: RNCC: 3 | RNVC: 2
MBEU147771: RNCC: 5 | RNVC: 2
MBEU147771: RNCC: 5 | RNVC: 2
MBEU147771: RNCC: 5 | RNVC: 9
10107277: RNCC: 6 | RNVC: 9

27 Sep 1992

3040-01-365-9150
Shouldered Shaft

013659150
MBEU145907: RNCC: 3 | RNVC: 2
MBEU145907: RNCC: 5 | RNVC: 2

19 Oct 1992

3040-01-366-7276
Linear Actuating Cylinder

013667276
518-4457086 PART 54: RNCC: 3 | RNVC: 2
518-4457086: RNCC: D | RNVC: 9

1 Nov 1992

3040-01-368-2112
Linear Actuating Cylinder Assembly

013682112
1H2H0A00272957: RNCC: 3 | RNVC: 2
H74/62T2B-150-7700-63-S44-9: RNCC: 3 | RNVC: 9
CYSR2480HY74T2B-150-7700-63-990: RNCC: 5 | RNVC: 9
89156913: RNCC: 5 | RNVC: 9
H74/62T2B-150-7700-63-S44-9: RNCC: 5 | RNVC: 9

27 Nov 1992

3040-01-368-7602
Shouldered Shaft

013687602
5497642-1: RNCC: 3 | RNVC: 2
5497642-1: RNCC: 5 | RNVC: 2
5497642-1: RNCC: 5 | RNVC: 9
5497642: RNCC: D | RNVC: 9

8 Dec 1992

3040-01-369-7710
Linear Actuating Cylinder Assembly

013697710
CUS8707-C016: RNCC: 3 | RNVC: 2
89156939: RNCC: 5 | RNVC: 2
89156939: RNCC: 5 | RNVC: 9

6 Jan 1993

3040-01-369-6851
Bevel Gearshaft

013696851
68788: RNCC: 3 | RNVC: 2
68788: RNCC: 5 | RNVC: 1

1 Jan 1993

3040-01-370-0195
Shaft Collar

013700195
735-80008-0: RNCC: 3 | RNVC: 2
SYQ5300: RNCC: 5 | RNVC: 2
735-80008: RNCC: 5 | RNVC: 2

11 Jan 1993

3040-01-356-8624
Rotating Shaft Eye Bracket

013568624
5760569: RNCC: 3 | RNVC: 2

12 Apr 1992

3040-01-357-1227
Control Cam

013571227
4100206-3: RNCC: 3 | RNVC: 2
4100206-3: RNCC: 5 | RNVC: 2
C61732-001: RNCC: 5 | RNVC: 9
4100206-3: RNCC: 5 | RNVC: 9
C61732-001: RNCC: 5 | RNVC: 9
41000206-3: RNCC: 5 | RNVC: 9
10163073: RNCC: 6 | RNVC: 9
4100206-3: RNCC: C | RNVC: 1

16 Apr 1992

3040-01-357-5677
Straight Shaft

013575677
226490: RNCC: 3 | RNVC: 2
24461: RNCC: 5 | RNVC: 2

26 Apr 1992

3040-01-357-7669
Extension Shaft

013577669
7010-SS-20: RNCC: 3 | RNVC: 2
53X-00-0019: RNCC: 5 | RNVC: 9
53X-00-0019: RNCC: C | RNVC: 1

30 Apr 1992

3040-01-363-2478
Spur Gearshaft

013632478
3860416-1: RNCC: 3 | RNVC: 2
3860416: RNCC: D | RNVC: 9

27 Aug 1992

3040-01-363-3766
Spline Adapter

013633766
3860791-1: RNCC: 3 | RNVC: 2

28 Aug 1992

3040-01-363-8114
Linear Actuating Cylinder

013638114
6962-HR: RNCC: 3 | RNVC: 2
8909A351-001: RNCC: 5 | RNVC: 2
8909A351-001: RNCC: 5 | RNVC: 9

6 Sep 1992

3040-01-364-4603
Rigid Connecting Link

013644603
17P2D4004-501: RNCC: 3 | RNVC: 2
17P2D4004-1: RNCC: 5 | RNVC: 9

19 Sep 1992

3040-01-316-0634
Linear Actuating Cylinder Assembly

013160634
204087: RNCC: 3 | RNVC: 2
204087: RNCC: 5 | RNVC: 2
1589AS604-1: RNCC: 5 | RNVC: 9
600-1786: RNCC: 5 | RNVC: 9
600-1786: RNCC: 5 | RNVC: 9

2 Mar 1990

3040-01-315-8215
Differential Gear Unit

013158215
83809: RNCC: 3 | RNVC: 2
16760AC ITEM 9: RNCC: 5 | RNVC: 9
83687 ITEM 9: RNCC: C | RNVC: 1

23 Feb 1990

3040-01-316-3074
Hub Clamp

013163074
1808814-2: RNCC: 3 | RNVC: 2
1977616 ITEM 29: RNCC: 5 | RNVC: 2
1977616: RNCC: D | RNVC: 9

8 Mar 1990

3040-01-316-3557
Rigid Connecting Link

013163557
65396-06032-101: RNCC: 3 | RNVC: 2

8 Mar 1990

3040-01-317-0368
Remote Control Lever

013170368
28937: RNCC: 3 | RNVC: 2

22 Mar 1990

3040-01-317-5424
Remote Control Lever

013175424
5362-542: RNCC: 3 | RNVC: 2
5362-542: RNCC: 5 | RNVC: 2
5362-542: RNCC: 5 | RNVC: 2

31 Mar 1990

3040-01-317-8862
Control Cam

013178862
BAH-153: RNCC: 3 | RNVC: 2
225329-01: RNCC: 5 | RNVC: 2

8 Apr 1990

3040-01-319-9504
Control Cam

013199504
2676564: RNCC: 3 | RNVC: 2

17 May 1990

3040-01-320-3802
Linear Actuating Cylinder Assembly

013203802
2Q7590: RNCC: 3 | RNVC: 2
537495: RNCC: 5 | RNVC: 9
0537495: RNCC: 5 | RNVC: 9

24 May 1990

3040-01-320-1528
Spur Gearshaft

013201528
2111007-213: RNCC: 3 | RNVC: 2

19 May 1990

3040-01-322-4606
Manual Control Lever

013224606
2207173: RNCC: 3 | RNVC: 2
7N5378: RNCC: 5 | RNVC: 9

6 Jul 1990

3040-01-323-3262
Shouldered Shaft

013233262
13265270: RNCC: 3 | RNVC: 2

26 Jul 1990

3040-01-323-3292
Bell Crank

013233292
6826942: RNCC: 3 | RNVC: 2
6826942: RNCC: 5 | RNVC: 9

26 Jul 1990

3040-01-323-9838
Remote Control Lever

013239838
3825093-3: RNCC: 3 | RNVC: 2
3825093-3: RNCC: 5 | RNVC: 2
3825093-3: RNCC: 5 | RNVC: 2
10107023: RNCC: 6 | RNVC: 9
3825093: RNCC: D | RNVC: 9

7 Aug 1990

3040-01-324-1979
Bell Crank

013241979
9997M75G06: RNCC: 3 | RNVC: 2

11 Aug 1990

3040-01-325-2146
Control Cam

013252146
3035-380: RNCC: 3 | RNVC: 2

30 Aug 1990

3040-01-325-7874
Bell Crank Support

013257874
70400-08163-043: RNCC: 3 | RNVC: 2
70400-08163-102-044-043: RNCC: 5 | RNVC: 2
70400-08163-043: RNCC: 5 | RNVC: 2

11 Sep 1990

3040-01-326-0871
Linear Actuating Cylinder Assembly

013260871
MS2-3A-CC-6.00-37.75-HIM1A: RNCC: 3 | RNVC: 2
MS2-3A-CC-6.00-37.75-HIM1A: RNCC: 3 | RNVC: 9
MS2-3A-CC-6.00: RNCC: 5 | RNVC: 9

18 Sep 1990

3040-01-325-6341
Rigid Connecting Link

013256341
4F23660-137A: RNCC: 3 | RNVC: 2

7 Sep 1990

3040-01-328-0214
Drive Tightener

013280214
FATQ & N4 TIGHTENER SHAFT: RNCC: 3 | RNVC: 2
FATQ: RNCC: 5 | RNVC: 9
500K0835: RNCC: 5 | RNVC: 9
FATQ-N4: RNCC: 5 | RNVC: 9

26 Oct 1990

3040-01-327-8578
Detent Plate

013278578
3-3006-07: RNCC: 3 | RNVC: 2
3-3006-07: RNCC: 5 | RNVC: 9
3-3006-07: RNCC: 5 | RNVC: 9

23 Oct 1990

3040-01-329-1320
Piston Rod Ring

013291320
R81776: RNCC: 3 | RNVC: 2
R81776: RNCC: 5 | RNVC: 2
R81776: RNCC: 5 | RNVC: 2

11 Nov 1990

3040-01-329-4922
Control Cam

013294922
104B8208-1: RNCC: 3 | RNVC: 2
104B8208-1: RNCC: C | RNVC: 1

18 Nov 1990

3040-01-330-6125
Nonrotating Shaft Eye Bracket

013306125
110973: RNCC: 3 | RNVC: 2
219034 FIND 26: RNCC: 5 | RNVC: 2

5 Dec 1990

3040-01-330-6071
Multiple Gears Gearshaft

013306071
312-2920-230: RNCC: 3 | RNVC: 2
321-2920-230: RNCC: 5 | RNVC: 9

5 Dec 1990

3040-01-331-4836
Shouldered Shaft

013314836
3825056-1: RNCC: 3 | RNVC: 2
3825056-1: RNCC: 5 | RNVC: 2
3825056-1: RNCC: 5 | RNVC: 9
10107028: RNCC: 6 | RNVC: 9

20 Dec 1990

3040-01-332-0076
Linear Actuating Cylinder Assembly Parts Kit

013320076
AH212091: RNCC: 3 | RNVC: 2
AH149842: RNCC: 3 | RNVC: 9
AH212091: RNCC: 5 | RNVC: 2
AH212091: RNCC: 5 | RNVC: 2
RE31138: RNCC: 5 | RNVC: 9

31 Dec 1990

3040-01-332-4268
Rigid Connecting Link

013324268
2666911: RNCC: 3 | RNVC: 2
10107033: RNCC: 6 | RNVC: 9

11 Jan 1991

3040-01-332-0767
Control Cam

013320767
7002761-3: RNCC: 3 | RNVC: 2
7002761-3: RNCC: 5 | RNVC: 2
10107031: RNCC: 6 | RNVC: 9

3 Jan 1991

3040-01-337-5570
Shouldered Shaft

013375570
4684676: RNCC: 3 | RNVC: 2
4684676: RNCC: 5 | RNVC: 2
80064-4684676: RNCC: C | RNVC: 1

17 Apr 1991

3040-01-338-0545
Manual Control Lever

013380545
39200: RNCC: 3 | RNVC: 2
335553: RNCC: 5 | RNVC: 2
335553: RNCC: 5 | RNVC: 9

25 Apr 1991

3040-01-338-0606
Push-Pull Control Assembly

013380606
1302129: RNCC: 3 | RNVC: 2
1302129: RNCC: 5 | RNVC: 9

25 Apr 1991

3040-01-338-2364
Manual Control Lever

013382364
1312735: RNCC: 3 | RNVC: 2
1312735: RNCC: 5 | RNVC: 9

28 Apr 1991

3040-01-338-3037
Rigid Connecting Link

013383037
70209-82507-042: RNCC: 3 | RNVC: 2

30 Apr 1991

3040-01-338-4430
Shouldered Shaft

013384430
167C2972: RNCC: 3 | RNVC: 2

3 May 1991

3040-01-337-4146
Control Cam

013374146
8928511: RNCC: 3 | RNVC: 2
2GH664: RNCC: 5 | RNVC: 2
2GH664: RNCC: 5 | RNVC: 9

14 Apr 1991

3040-01-338-4767
Rigid Connecting Link

013384767
12916808: RNCC: 3 | RNVC: 2

4 May 1991

3040-01-338-6050
Flexible Drive Shaft

013386050
3502701-4: RNCC: 3 | RNVC: 2
3502701-4 ITEM 6: RNCC: 5 | RNVC: 9
3505607 PC 69: RNCC: 5 | RNVC: 9
3502701: RNCC: D | RNVC: 9
3505607: RNCC: D | RNVC: 9

7 May 1991

3040-01-339-0156
Piston Ring

013390156
A-9601-J: RNCC: 3 | RNVC: 2
0-9601 AND 0-9602 ITEM 9: RNCC: 5 | RNVC: 9
0-9601: RNCC: D | RNVC: 9
0-9602: RNCC: D | RNVC: 9

14 May 1991

NSN 3040-01-339-0510 013390510 CYLINDER ASSEMBLY,ACTUATING,LINEAR

3040-01-339-0510
Linear Actuating Cylinder Assembly

013390510
R59: RNCC: 3 | RNVC: 2
RC59: RNCC: 5 | RNVC: 9
RC-59: RNCC: 5 | RNVC: 9
HSR-59T: RNCC: 5 | RNVC: 9
12913203: RNCC: 5 | RNVC: 9

15 May 1991

3040-01-339-6168
Shouldered Shaft

013396168
68A830863-2003: RNCC: 3 | RNVC: 2

24 May 1991

3040-01-340-5607
Shouldered Shaft

013405607
M61526-2: RNCC: 3 | RNVC: 2
M81749 ITEM 5: RNCC: 5 | RNVC: 2

17 Jun 1991

3040-01-341-0116
Linear Actuating Cylinder Assembly Parts Kit

013410116
L070740001: RNCC: 3 | RNVC: 2

23 Jun 1991

3040-01-341-0114
Linear Actuating Cylinder Assembly Parts Kit

013410114
L070740002: RNCC: 3 | RNVC: 2

23 Jun 1991

3040-01-341-0139
Counterbalance Weight

013410139
AS44522-015: RNCC: 3 | RNVC: 2
AS44522-015: RNCC: 5 | RNVC: 2
AS44522-015: RNCC: 5 | RNVC: 9
AS44522-015: RNCC: 5 | RNVC: 9

23 Jun 1991

3040-01-341-4659
Transfer Drive Clutch Shaft

013414659
507187: RNCC: 3 | RNVC: 2
TM5114CA5-PG15 PC 18: RNCC: 5 | RNVC: 9
507187: RNCC: 5 | RNVC: 9

1 Jul 1991

3040-01-341-6588
Linear Actuating Cylinder Assembly Parts Kit

013416588
L070750003: RNCC: 3 | RNVC: 2

5 Jul 1991

3040-01-343-0663
Linear Actuating Cylinder Assembly

013430663
AH142932: RNCC: 3 | RNVC: 2
AH142932: RNCC: 5 | RNVC: 9
AH136053: RNCC: 5 | RNVC: 9
AH136053: RNCC: 5 | RNVC: 9

4 Aug 1991

3040-01-344-6398
Shouldered Shaft

013446398
6547C032-1: RNCC: 3 | RNVC: 2

4 Sep 1991

3040-01-345-1124
Mechanical Drive Housing

013451124
0223-00210: RNCC: 3 | RNVC: 2
6HA174: RNCC: 5 | RNVC: 2
02-23-00210-022: RNCC: 5 | RNVC: 9
6HA174: RNCC: 5 | RNVC: 9
2FP82: RNCC: C | RNVC: 1
05-71-00764: RNCC: D | RNVC: 9

12 Sep 1991

3040-01-345-3696
Counterbalance Weight

013453696
335-014-401-0: RNCC: 3 | RNVC: 2

18 Sep 1991

3040-01-346-0870
Linear Actuating Cylinder Assembly

013460870
SC-192-2: RNCC: 3 | RNVC: 2
SC-192-2: RNCC: 5 | RNVC: 9

26 Sep 1991

3040-01-344-1975
Rigid Connecting Link

013441975
419 551 76 55: RNCC: 3 | RNVC: 2
519 551 7655: RNCC: 5 | RNVC: 2
519 551 7655: RNCC: 5 | RNVC: 9

24 Aug 1991

3040-01-347-9470
Remote Control Lever

013479470
555190-4: RNCC: 3 | RNVC: 2
555190-4: RNCC: 5 | RNVC: 9

1 Nov 1991

3040-01-348-2200
Piston Rod Guide

013482200
780016-1: RNCC: 3 | RNVC: 2
780016: RNCC: 5 | RNVC: 2

6 Nov 1991

3040-01-344-1850
Controllable Swashplate

013441850
741721: RNCC: 3 | RNVC: 2

24 Aug 1991

3040-01-351-4016
Shouldered Shaft

013514016
033-71572: RNCC: 3 | RNVC: 2

8 Jan 1992

3040-01-351-5958
Control Cable Assembly

013515958
CC33210P: RNCC: 3 | RNVC: 2
32377-003-120IN: RNCC: 3 | RNVC: 9
5104949 ITEM 23: RNCC: 5 | RNVC: 2
032377-03-120.0: RNCC: 5 | RNVC: 9
5104949: RNCC: D | RNVC: 9

11 Jan 1992

3040-01-350-6314
Shouldered Shaft

013506314
744268-2: RNCC: 3 | RNVC: 2
B-1B: RNCC: 5 | RNVC: 2
744268-2: RNCC: 5 | RNVC: 2
744268: RNCC: D | RNVC: 9

19 Dec 1991

3040-01-352-2344
Housing Adapter

013522344
CS1C45AXA: RNCC: 3 | RNVC: 9
15556A: RNCC: 5 | RNVC: 9
CS1C45C: RNCC: 5 | RNVC: 9

23 Jan 1992

3040-01-353-0259
Shouldered Shaft Assembly

013530259
40A2218: RNCC: 3 | RNVC: 2

5 Feb 1992

3040-01-353-5911
Vernier Control Head

013535911
317310: RNCC: 3 | RNVC: 2
307941-003: RNCC: 5 | RNVC: 9
307941-003: RNCC: 5 | RNVC: 9
307941-003: RNCC: 5 | RNVC: 9

13 Feb 1992

3040-01-353-7532
Manual Control Lever

013537532
206562: RNCC: 3 | RNVC: 2
A-2247-G-111: RNCC: 5 | RNVC: 2
A-2247-G-111: RNCC: 5 | RNVC: 9
A-2247-G-111: RNCC: C | RNVC: 1

15 Feb 1992

3040-01-359-8464
Rigid Connecting Link

013598464
1873060 W: RNCC: 3 | RNVC: 2
1873060 W: RNCC: 5 | RNVC: 9

13 Jun 1992

3040-01-360-6516
Remote Control Lever

013606516
734.04.021.03: RNCC: 3 | RNVC: 2
734.04.021.03: RNCC: 5 | RNVC: 9

28 Jun 1992

3040-01-363-8153
Vehicular Universal Joint

013638153
A2-3202-A-9621: RNCC: 3 | RNVC: 2
A2-3202-A-9621: RNCC: 5 | RNVC: 2
A2-3202-A-9621: RNCC: 5 | RNVC: 2

6 Sep 1992

3040-01-364-8892
Rigid Connecting Link

013648892
MBEU145913: RNCC: 3 | RNVC: 2
MBEU145913: RNCC: 5 | RNVC: 2
MBEU145913: RNCC: 5 | RNVC: 2

27 Sep 1992

3040-01-366-0283
Control Cam

013660283
437C161-2: RNCC: 3 | RNVC: 2
437C161-2: RNCC: 5 | RNVC: 9
437C161: RNCC: D | RNVC: 9

19 Oct 1992

3040-01-367-2179
Body Hub

013672179
037-54322-0: RNCC: 3 | RNVC: 2
037-54322: RNCC: 5 | RNVC: 9
M27-01412 PIECE 5: RNCC: 5 | RNVC: 9
M27-01412: RNCC: D | RNVC: 9

9 Nov 1992

3040-01-368-1315
Shouldered Shaft

013681315
DAA7271D058-001: RNCC: 3 | RNVC: 2

26 Nov 1992

3040-01-368-0053
Counterbalance Weight

013680053
L6314024-003: RNCC: 3 | RNVC: 2

23 Nov 1992

3040-01-368-6568
Linear Actuating Cylinder Assembly

013686568
1HHV0A00251005: RNCC: 3 | RNVC: 2
89156940: RNCC: 5 | RNVC: 9
CYSR5000HY84T2R-400-6238-175-990: RNCC: 5 | RNVC: 9

5 Dec 1992

3040-01-368-7706
Rigid Connecting Link

013687706
196389-A: RNCC: 3 | RNVC: 2

8 Dec 1992

3040-01-369-5349
Rigid Connecting Link

013695349
2111007-133: RNCC: 3 | RNVC: 2

24 Dec 1992

3040-01-369-7711
Linear Actuating Cylinder Assembly

013697711
89156936: RNCC: 3 | RNVC: 2
CYSR 5000 HY-84T2B-200-631100990: RNCC: 3 | RNVC: 9
89156936: RNCC: 5 | RNVC: 9

6 Jan 1993

3040-01-332-7046
Rigid Connecting Link

013327046
68A413015-1001: RNCC: 3 | RNVC: 2

15 Jan 1991

3040-01-333-2998
Remote Control Lever

013332998
UN0141: RNCC: 3 | RNVC: 2
701-149728-58: RNCC: 5 | RNVC: 9
701-149728-58: RNCC: C | RNVC: 1
701-149728-58: RNCC: C | RNVC: 1

30 Jan 1991

3040-01-333-1926
Linear Actuating Cylinder Assembly Parts Kit

013331926
A-8693: RNCC: 3 | RNVC: 2
74001262: RNCC: 5 | RNVC: 9

26 Jan 1991

3040-01-336-8295
Rigid Connecting Link

013368295
F270486: RNCC: 3 | RNVC: 2
F270486: RNCC: 5 | RNVC: 2
F270486: RNCC: 5 | RNVC: 9
F270486: RNCC: 5 | RNVC: 9

3 Apr 1991

3040-01-337-4160
Mechanical Drive Housing

013374160
10400237241: RNCC: 3 | RNVC: 9
H+B 50290520: RNCC: 5 | RNVC: 2
10400237241: RNCC: 5 | RNVC: 9

14 Apr 1991

3040-01-316-0564
Counterbalance Weight

013160564
3755-4: RNCC: 3 | RNVC: 2
3755-4: RNCC: 5 | RNVC: 2
3040PL0928071: RNCC: 6 | RNVC: 9

2 Mar 1990

3040-01-316-3073
Shaft Collar

013163073
1858784-7: RNCC: 3 | RNVC: 2
1977616 ITEM 25: RNCC: 5 | RNVC: 2
1977616: RNCC: D | RNVC: 9

8 Mar 1990

3040-01-317-0717
Straight Shaft

013170717
91742: RNCC: 3 | RNVC: 9
L696/27 ITEM-71: RNCC: 5 | RNVC: 9
L698/25: RNCC: 5 | RNVC: 9
91841: RNCC: 5 | RNVC: 9
091742 BE: RNCC: 5 | RNVC: 9
91841: RNCC: 5 | RNVC: 9
L696/27 ITEM-71: RNCC: 5 | RNVC: 9
L698/25: RNCC: 5 | RNVC: 9

22 Mar 1990

3040-01-317-3913
Shouldered Shaft

013173913
42498-1: RNCC: 3 | RNVC: 2
42498-1: RNCC: 5 | RNVC: 9

29 Mar 1990

3040-01-318-2958
Shaft Retaining Plate

013182958
9380511: RNCC: 3 | RNVC: 2

14 Apr 1990

3040-01-318-2705
Linear Actuating Cylinder Assembly Parts Kit

013182705
1501413: RNCC: 3 | RNVC: 2
360299: RNCC: 5 | RNVC: 2
360299: RNCC: 5 | RNVC: 9
360299: RNCC: 5 | RNVC: 9

14 Apr 1990

3040-01-319-0799
Mechanical Drive Housing

013190799
8350941: RNCC: 3 | RNVC: 2

1 May 1990

3040-01-319-4343
Breather

013194343
DC125B: RNCC: 3 | RNVC: 2

8 May 1990

3040-01-320-2729
Rigid Connecting Link

013202729
12576928: RNCC: 3 | RNVC: 2
A-502: RNCC: 5 | RNVC: 2
12576928: RNCC: 5 | RNVC: 9
A-502: RNCC: 5 | RNVC: 9
A-502: RNCC: 5 | RNVC: 9

23 May 1990

3040-01-320-4714
Rigid Connecting Link

013204714
4071197-01: RNCC: 3 | RNVC: 2
4071197-01: RNCC: 5 | RNVC: 2
3040PL0668578: RNCC: 6 | RNVC: 9

25 May 1990

3040-01-320-5458
Linear Actuating Cylinder Assembly

013205458
PMC-5612: RNCC: 3 | RNVC: 2

26 May 1990

3040-01-320-8770
Rigid Connecting Link

013208770
4075583-01: RNCC: 3 | RNVC: 2
4075583-01: RNCC: 5 | RNVC: 2
3040PL0668829: RNCC: 6 | RNVC: 9

5 Jun 1990

3040-01-320-0204
Remote Control Lever

013200204
12346175: RNCC: 3 | RNVC: 2

18 May 1990

3040-01-320-9425
Shouldered Shaft

013209425
856A4055P80: RNCC: 3 | RNVC: 2
856A4055P80: RNCC: 3 | RNVC: 9

6 Jun 1990

3040-01-321-3743
Shouldered Shaft Assembly

013213743
12553811: RNCC: 3 | RNVC: 2

16 Jun 1990

3040-01-321-9845
Straight Shaft

013219845
919C741-01: RNCC: 3 | RNVC: 2
919C741-01: RNCC: 5 | RNVC: 9
919C741: RNCC: C | RNVC: 1
919C741: RNCC: C | RNVC: 1
917C741: RNCC: C | RNVC: 1

27 Jun 1990

3040-01-322-0684
Rigid Connecting Link

013220684
16P1103-803: RNCC: 3 | RNVC: 2
16P1103-803: RNCC: 5 | RNVC: 2
16P1103-803: RNCC: 5 | RNVC: 2
16P1103-803: RNCC: 5 | RNVC: 2
3040PL0669132: RNCC: 6 | RNVC: 9

28 Jun 1990

3040-01-322-0683
Remote Control Lever

013220683
4074624: RNCC: 3 | RNVC: 2
4074624: RNCC: 5 | RNVC: 2
3040PL0669121: RNCC: 6 | RNVC: 9

28 Jun 1990

3040-01-323-1791
Pivot Shaft Assembly

013231791
5985179: RNCC: 3 | RNVC: 2

23 Jul 1990

3040-01-325-2148
Mechanical Drive Housing

013252148
4033-742: RNCC: 3 | RNVC: 2

30 Aug 1990

3040-01-325-6346
Rigid Connecting Link

013256346
4C63121-103A: RNCC: 3 | RNVC: 9
4C63121-103A: RNCC: 5 | RNVC: 9

7 Sep 1990

3040-01-327-5276
Shaft Retaining Plate

013275276
12361750: RNCC: 3 | RNVC: 2
12361750: RNCC: 5 | RNVC: 2
12361750: RNCC: 5 | RNVC: 2
6450E3: RNCC: 5 | RNVC: 9
12361750: RNCC: 7 | RNVC: 2

16 Oct 1990

3040-01-328-8642
Straight Shaft

013288642
347438: RNCC: 3 | RNVC: 2

8 Nov 1990

3040-01-330-4993
Shouldered Shaft Assembly

013304993
3040013304993: RNCC: 3 | RNVC: 2
1300012: RNCC: 3 | RNVC: 9

4 Dec 1990

3040-01-330-5063
Nonrotating Shaft Eye Bracket

013305063
12369153: RNCC: 3 | RNVC: 9
12369153: RNCC: 5 | RNVC: 2

4 Dec 1990

3040-01-330-8263
Double Ball Joint

013308263
29104: RNCC: 3 | RNVC: 2
29104: RNCC: 5 | RNVC: 9
1771AS324-1: RNCC: 7 | RNVC: 2

9 Dec 1990

3040-01-339-1095
Multiple Gears Gearshaft

013391095
746718: RNCC: 3 | RNVC: 2

16 May 1991

3040-01-330-9455
Shouldered Shaft

013309455
7123-770A: RNCC: 3 | RNVC: 2
3040PL0825570: RNCC: 6 | RNVC: 9

12 Dec 1990

3040-01-330-9711
Shield Retaining

013309711
145D5337-1: RNCC: 3 | RNVC: 2
145D5337-1: RNCC: 5 | RNVC: 2

12 Dec 1990

3040-01-331-5492
Extension Shaft

013315492
865B1110: RNCC: 3 | RNVC: 2

20 Dec 1990

3040-01-332-0236
Shaft Retaining Plate

013320236
4046756SA: RNCC: 3 | RNVC: 2
4046756: RNCC: 5 | RNVC: 2

1 Jan 1991

3040-01-341-0142
Counterbalance Weight

013410142
2301020: RNCC: 3 | RNVC: 2
AS44522-060: RNCC: 5 | RNVC: 2
AS44522-060: RNCC: 5 | RNVC: 9
AS44522-060: RNCC: 5 | RNVC: 9
AS44522-060: RNCC: 5 | RNVC: 9

23 Jun 1991

3040-01-332-5407
Remote Control Lever

013325407
68A831328-1001: RNCC: 3 | RNVC: 2

11 Jan 1991

3040-01-332-7703
Spur Gearshaft

013327703
2AL659: RNCC: 3 | RNVC: 2
2AL659: RNCC: 5 | RNVC: 9

16 Jan 1991

3040-01-332-6047
Control Cable Assembly

013326047
8984111-5: RNCC: 3 | RNVC: 2
10130539: RNCC: 6 | RNVC: 9
3040PL0868179: RNCC: 6 | RNVC: 9

12 Jan 1991

3040-01-336-2876
Turbine Engine Vane Actuating Arm

013362876
1388M41G01: RNCC: 3 | RNVC: 2
P37130: RNCC: 5 | RNVC: 9
1388M41G01: RNCC: 5 | RNVC: 9
1388M41G01: RNCC: 5 | RNVC: 9
1286M45G01: RNCC: C | RNVC: 1

24 Mar 1991

3040-01-336-8293
Rigid Connecting Link

013368293
1 421 933 132: RNCC: 3 | RNVC: 2

3 Apr 1991

3040-01-337-4044
Shouldered Shaft

013374044
034-70814: RNCC: 3 | RNVC: 2
SD-01412: RNCC: 5 | RNVC: 9
034-70176-C: RNCC: 5 | RNVC: 9
SD-01412 PIECE 3: RNCC: 5 | RNVC: 9

14 Apr 1991

3040-01-337-4169
Linear Actuating Cylinder Piston

013374169
5D3-02298 ITEM 12: RNCC: 3 | RNVC: 2
5D3-02296 ITEM 12: RNCC: 5 | RNVC: 2
5C1-03002: RNCC: 5 | RNVC: 2
5D3-02297 ITEM 12: RNCC: 5 | RNVC: 2
5D3-02298: RNCC: D | RNVC: 9

14 Apr 1991

3040-01-341-5172
Nonrotating Shaft Eye Bracket

013415172
507855: RNCC: 3 | RNVC: 2
TM75114CA5-PG 12 PC 30: RNCC: 5 | RNVC: 9
50785: RNCC: C | RNVC: 1

1 Jul 1991

3040-01-341-7390
Shouldered Shaft

013417390
12592622: RNCC: 3 | RNVC: 2

5 Jul 1991

3040-01-341-6285
Remote Control Lever

013416285
3825062-5: RNCC: 3 | RNVC: 2
3825062-5: RNCC: 5 | RNVC: 2
3825062-5: RNCC: 5 | RNVC: 9
10107037: RNCC: 6 | RNVC: 9

3 Jul 1991

3040-01-343-5576
Bevel Gearshaft

013435576
12592740: RNCC: 3 | RNVC: 2

14 Aug 1991

3040-01-344-5767
Counterbalance Weight

013445767
4502-084: RNCC: 3 | RNVC: 2

31 Aug 1991

3040-01-344-5768
Counterbalance Weight

013445768
336-015-206-0: RNCC: 3 | RNVC: 2

31 Aug 1991

3040-01-345-3951
Shaft Collar

013453951
2248-A: RNCC: 3 | RNVC: 2

18 Sep 1991

3040-01-346-3240
Rigid Connecting Link

013463240
18-17997-003: RNCC: 3 | RNVC: 2
18-17997: RNCC: D | RNVC: 9

3 Oct 1991

3040-01-344-1852
Manual Control Lever

013441852
6984ED70 PIECE NO. 15: RNCC: 3 | RNVC: 2
24-4597-3: RNCC: 5 | RNVC: 2
6984ED70: RNCC: D | RNVC: 9

24 Aug 1991

3040-01-349-7399
Manual Control Lever

013497399
391 1842 004: RNCC: 3 | RNVC: 2

3 Dec 1991

3040-01-349-7892
Spur Gearshaft

013497892
8521-14: RNCC: 3 | RNVC: 2

4 Dec 1991

3040-01-350-0057
Rigid Connecting Link

013500057
780004-1: RNCC: 3 | RNVC: 2
780004: RNCC: D | RNVC: 9

7 Dec 1991

3040-01-349-7927
Rotating Shaft Eye Bracket

013497927
8521-4: RNCC: 3 | RNVC: 2

4 Dec 1991

3040-01-350-8952
Push-Pull Control Assembly

013508952
2A8-03415-1: RNCC: 3 | RNVC: 2
5D3-02236 ITEM 56: RNCC: 5 | RNVC: 2

25 Dec 1991

3040-01-349-8582
Mechanical Drive Housing

013498582
101445-1: RNCC: 3 | RNVC: 2
101346-1: RNCC: 5 | RNVC: 9

5 Dec 1991

3040-01-351-1537
Control Cam

013511537
3035-350: RNCC: 3 | RNVC: 2

1 Jan 1992

3040-01-351-3049
Linear Actuating Cylinder Assembly

013513049
18D-3: RNCC: 3 | RNVC: 2

4 Jan 1992

3040-01-351-8325
Nonrotating Shaft Eye Bracket

013518325
12361539-1: RNCC: 3 | RNVC: 2
12361539: RNCC: D | RNVC: 9

15 Jan 1992

3040-01-352-9166
Rigid Connecting Link

013529166
214-001-023-107: RNCC: 3 | RNVC: 2
214-001-023: RNCC: D | RNVC: 9

1 Feb 1992

3040-01-352-9065
Shaft Collar

013529065
12926847: RNCC: 3 | RNVC: 2

1 Feb 1992

3040-01-352-5812
Mechanical Drive Housing

013525812
13191604-16: RNCC: 3 | RNVC: 2
13191604-16: RNCC: 3 | RNVC: 9
13191604-16: RNCC: 5 | RNVC: 9

29 Jan 1992

3040-01-353-2277
Rigid Connecting Link

013532277
7002717-1: RNCC: 3 | RNVC: 2
10130525: RNCC: 6 | RNVC: 9

7 Feb 1992

3040-01-353-8365
Flexible Shaft Assembly Casing

013538365
612770-8L: RNCC: 3 | RNVC: 2
612770-8R: RNCC: 3 | RNVC: 2

18 Feb 1992

3040-01-354-0412
Linear Actuating Cylinder Assembly Parts Kit

013540412
AH216299: RNCC: 3 | RNVC: 2
AH176126: RNCC: 5 | RNVC: 9
AH176126: RNCC: 5 | RNVC: 9
AH137209: RNCC: 5 | RNVC: 9
AH137209: RNCC: 5 | RNVC: 9

21 Feb 1992

3040-01-354-9153
Linear Actuating Cylinder Piston Rod

013549153
6-768-002396: RNCC: 3 | RNVC: 2
2HE918: RNCC: 5 | RNVC: 2
2HE918: RNCC: 5 | RNVC: 9

7 Mar 1992

3040-01-355-3112
Rigid Connecting Link

013553112
SW32736: RNCC: 3 | RNVC: 2

14 Mar 1992

3040-01-355-6009
Counterbalance Weight

013556009
683819-0001: RNCC: 3 | RNVC: 2
683819-1: RNCC: 5 | RNVC: 9

19 Mar 1992

3040-01-355-5595
Straight Shaft

013555595
6-810-002160: RNCC: 3 | RNVC: 2
2HE925: RNCC: C | RNVC: 1

19 Mar 1992

3040-01-355-7661
Shouldered Shaft

013557661
12926845: RNCC: 3 | RNVC: 2
717124414404: RNCC: 5 | RNVC: 9

23 Mar 1992

3040-01-356-3610
Control Cam

013563610
12910485: RNCC: 3 | RNVC: 2

3 Apr 1992

3040-01-356-8877
Shouldered Shaft

013568877
2179-3429-050: RNCC: 3 | RNVC: 2
2179-3429-050: RNCC: 5 | RNVC: 2
2179-3429-010: RNCC: 5 | RNVC: 9
2179-3429-010: RNCC: 5 | RNVC: 9
2179-3429-010: RNCC: C | RNVC: 1

13 Apr 1992

3040-01-356-8715
Spur Gearshaft

013568715
25640: RNCC: 3 | RNVC: 9
231141: RNCC: 5 | RNVC: 2

12 Apr 1992

3040-01-358-5174
Rigid Connecting Link

013585174
AMBK07-1001: RNCC: 3 | RNVC: 2
17B8D8547-1: RNCC: 7 | RNVC: 2

15 May 1992

3040-01-359-0634
Shouldered Shaft Assembly

013590634
89030-1: RNCC: 3 | RNVC: 9
89020 FIND 51: RNCC: 5 | RNVC: 9
89020 FIND 51: RNCC: C | RNVC: 1
89030-1: RNCC: C | RNVC: 1
89030: RNCC: D | RNVC: 9

28 May 1992

3040-01-360-1035
Straight Shaft

013601035
7W-9737: RNCC: 3 | RNVC: 2
7W9737: RNCC: 5 | RNVC: 2
7W9737: RNCC: 5 | RNVC: 2
7W9737: RNCC: 5 | RNVC: 2
7W9737: RNCC: 5 | RNVC: 9
23KP374: RNCC: 7 | RNVC: 2

17 Jun 1992

3040-01-359-1118
Mechanical Drive Housing

013591118
17585: RNCC: 3 | RNVC: 2
5939258: RNCC: 3 | RNVC: 2
17585: RNCC: 5 | RNVC: 2
5939258: RNCC: 5 | RNVC: 9
3040PL0768039: RNCC: 6 | RNVC: 9

29 May 1992

3040-01-360-6296
Linear Actuating Cylinder Assembly Parts Kit

013606296
57304800: RNCC: 3 | RNVC: 2
13171: RNCC: 5 | RNVC: 2
855017P0800: RNCC: 5 | RNVC: 9

28 Jun 1992

3040-01-361-0753
Nonrotating Shaft Eye Bracket

013610753
12361540-1: RNCC: 3 | RNVC: 2
12361540-1: RNCC: 5 | RNVC: 2
12361540-1: RNCC: 5 | RNVC: 9
12361540: RNCC: D | RNVC: 9

8 Jul 1992

3040-01-361-0754
Nonrotating Shaft Eye Bracket

013610754
12361540-2: RNCC: 3 | RNVC: 2
12361540-2: RNCC: 5 | RNVC: 2
12361540-2: RNCC: 5 | RNVC: 9
12361540: RNCC: D | RNVC: 9

8 Jul 1992

3040-01-361-0757
Ball Joint

013610757
593-6405224 PIECE 83: RNCC: 3 | RNVC: 2
113-A-0098-2: RNCC: 5 | RNVC: 2
593-6405224: RNCC: D | RNVC: 9

8 Jul 1992

3040-01-361-5138
Straight Shaft

013615138
6-810-002152: RNCC: 3 | RNVC: 2
2HG110: RNCC: C | RNVC: 1

18 Jul 1992

3040-01-361-5021
Spur Gearshaft

013615021
3822105-1: RNCC: 3 | RNVC: 2

18 Jul 1992

3040-01-362-3487
Piston Ring Set

013623487
S32152-336-99 PH: RNCC: 3 | RNVC: 2
A78093-336PH-99: RNCC: 5 | RNVC: 2
S32152-336-99 PH: RNCC: 5 | RNVC: 9
A78093: RNCC: D | RNVC: 9
S32152: RNCC: D | RNVC: 9

5 Aug 1992

3040-01-363-2436
Linear Actuating Cylinder Assembly

013632436
1H2A0000268418: RNCC: 3 | RNVC: 2
AF162712A0: RNCC: 5 | RNVC: 2
3AF162712A0: RNCC: 5 | RNVC: 9
3.25CBB-2ANUS14CX24: RNCC: 5 | RNVC: 9

27 Aug 1992

3040-01-363-4363
Mechanical Drive Housing Part

013634363
3883493-3: RNCC: 3 | RNVC: 2
3883493-3: RNCC: 5 | RNVC: 2
3883493: RNCC: D | RNVC: 9

29 Aug 1992

3040-01-364-8291
Control Cam

013648291
N1976: RNCC: 3 | RNVC: 2
1806-1286 ITEM 7: RNCC: 5 | RNVC: 2
1806-1286: RNCC: D | RNVC: 9

25 Sep 1992

3040-01-364-8890
Rigid Connecting Link

013648890
MBEU145909: RNCC: 3 | RNVC: 2
MBEU145909: RNCC: 5 | RNVC: 2

27 Sep 1992

3040-01-364-8891
Rigid Connecting Link

013648891
MBEU145911: RNCC: 3 | RNVC: 2
MBEU145911: RNCC: 5 | RNVC: 2

27 Sep 1992

3040-01-365-2576
Shouldered Shaft

013652576
MBEU141744: RNCC: 3 | RNVC: 2
MBEU141744: RNCC: 5 | RNVC: 2
10107280: RNCC: 6 | RNVC: 9

4 Oct 1992

3040-01-365-2601
Mechanical Drive Housing

013652601
MBEU141329: RNCC: 3 | RNVC: 2
MBEU141329: RNCC: 5 | RNVC: 2
10488865: RNCC: 6 | RNVC: 9

4 Oct 1992

3040-01-365-3040
Pawl

013653040
MBEU140724: RNCC: 3 | RNVC: 2
MBEU140724: RNCC: 5 | RNVC: 2
10177858: RNCC: 6 | RNVC: 9
B48712-003-240: RNCC: C | RNVC: 1

5 Oct 1992

3040-01-365-9294
Pawl

013659294
MBEU140832: RNCC: 3 | RNVC: 9
MBEU140832: RNCC: 5 | RNVC: 2
MBEU140832: RNCC: 5 | RNVC: 9
MBEU140832: RNCC: 5 | RNVC: 9

19 Oct 1992

3040-01-368-6569
Linear Actuating Cylinder Assembly

013686569
1H000006043: RNCC: 3 | RNVC: 2
CYSR 5000 HY84T2B15075063990: RNCC: 3 | RNVC: 9
89156937: RNCC: 5 | RNVC: 9

5 Dec 1992

3040-01-368-4983
Control Cam

013684983
50135-1: RNCC: 3 | RNVC: 2
50135-1: RNCC: 5 | RNVC: 2

3 Dec 1992

3040-01-368-7976
Remote Control Lever

013687976
1876900: RNCC: 3 | RNVC: 2
1876900: RNCC: 5 | RNVC: 9

9 Dec 1992

3040-01-368-8426
Shouldered Shaft

013688426
392198800: RNCC: 3 | RNVC: 9
3921988: RNCC: 5 | RNVC: 9

10 Dec 1992

3040-01-337-6174
Shouldered Shaft

013376174
157D3606: RNCC: 3 | RNVC: 2

18 Apr 1991

3040-01-338-4419
Straight Shaft

013384419
167C2973: RNCC: 3 | RNVC: 2

3 May 1991

3040-01-339-0518
Spur Gearshaft

013390518
747450: RNCC: 3 | RNVC: 2

15 May 1991

3040-01-339-7540
Linear Actuating Cylinder

013397540
101401-2: RNCC: 3 | RNVC: 2

29 May 1991

3040-01-340-4325
Accumlator Test Set

013404325
0538103013: RNCC: 3 | RNVC: 2
0 538 103 013: RNCC: 3 | RNVC: 9
0 538 103 011: RNCC: 5 | RNVC: 9
0 538 103 013: RNCC: 5 | RNVC: 9
0 538 103 011: RNCC: 5 | RNVC: 9
ASC1361065: RNCC: 5 | RNVC: 9
0538103010: RNCC: 5 | RNVC: 9

13 Jun 1991

3040-01-340-4336
Rigid Connecting Link Adapter

013404336
70209-82507-102: RNCC: 3 | RNVC: 2
70209-82507: RNCC: D | RNVC: 9

13 Jun 1991

3040-01-332-0219
Mechanical Drive Housing

013320219
SW31426: RNCC: 3 | RNVC: 2

1 Jan 1991

3040-01-252-4069
Counterbalance Weight

012524069
A334A196-109: RNCC: 3 | RNVC: 2

1 Apr 1987

3040-01-251-9673
Straight Shaft

012519673
F405-10832-3: RNCC: 3 | RNVC: 2

27 Mar 1987

3040-01-252-3800
Straight Shaft

012523800
4032197-0501: RNCC: 3 | RNVC: 2
4032197: RNCC: D | RNVC: 9

1 Apr 1987

3040-01-252-7689
Rigid Connecting Link

012527689
212-030-104-101: RNCC: 3 | RNVC: 2

8 Apr 1987

3040-01-253-1785
Mechanical Drive Housing

012531785
D2151: RNCC: 3 | RNVC: 2
D2151: RNCC: 3 | RNVC: 9

14 Apr 1987

3040-01-253-1992
Shaft Collar

012531992
52-B-9087-1: RNCC: 3 | RNVC: 2
52-B-9087: RNCC: D | RNVC: 9

14 Apr 1987

3040-01-252-4348
Manual Control Lever

012524348
1670972: RNCC: 3 | RNVC: 2
1670972: RNCC: 5 | RNVC: 2
1670972: RNCC: 5 | RNVC: 9
1670972: RNCC: 5 | RNVC: 9

3 Apr 1987

3040-01-253-5583
Remote Control Lever

012535583
8P4925: RNCC: 3 | RNVC: 2

21 Apr 1987

3040-01-253-7778
Counterbalance Weight

012537778
301-332-514-0: RNCC: 3 | RNVC: 2
301-332-514-0: RNCC: 5 | RNVC: 9

24 Apr 1987

3040-01-254-9588
Remote Control Lever

012549588
10884886: RNCC: 3 | RNVC: 2
10884886: RNCC: 5 | RNVC: 9

13 May 1987

3040-01-255-6200
Shouldered Shaft

012556200
41004561: RNCC: 3 | RNVC: 2
41004561: RNCC: 5 | RNVC: 2

22 May 1987

3040-01-255-1602
Bell Crank

012551602
209-062-743-101: RNCC: 3 | RNVC: 2
209-062-743: RNCC: D | RNVC: 9

15 May 1987

3040-01-256-0342
Flexible Shaft Assembly Casing

012560342
57350-3FT0IN: RNCC: 3 | RNVC: 2
57795-3: RNCC: 5 | RNVC: 9

30 May 1987

3040-01-256-7951
Bell Crank

012567951
209-001-765-105: RNCC: 3 | RNVC: 2
209-001-765-101: RNCC: 5 | RNVC: 9

9 Jun 1987

3040-01-256-8279
Manual Control Lever

012568279
75A353071-2001: RNCC: 3 | RNVC: 2
75A353071-2001: RNCC: 3 | RNVC: 2

9 Jun 1987

3040-01-257-2499
Manual Control Lever

012572499
G70001-2: RNCC: 3 | RNVC: 2

16 Jun 1987

3040-01-264-9554
Rigid Connecting Link

012649554
45617-13: RNCC: 3 | RNVC: 2
45617-11: RNCC: 5 | RNVC: 9
5342PL0811491: RNCC: 6 | RNVC: 9
45617: RNCC: D | RNVC: 9

8 Oct 1987

3040-01-256-9821
Standoff Assembly

012569821
57737-00: RNCC: 3 | RNVC: 2
57737: RNCC: 5 | RNVC: 9
POD-57737: RNCC: D | RNVC: 9

10 Jun 1987

3040-01-266-2119
Control Cam

012662119
4849920: RNCC: 3 | RNVC: 2
4849911 PIECE 5: RNCC: 5 | RNVC: 2

22 Oct 1987

3040-01-266-7207
Cylinder Repair Kit

012667207
787AS284-20: RNCC: 3 | RNVC: 2
999-073272151: RNCC: 5 | RNVC: 2

30 Oct 1987

3040-01-267-2571
Remote Control Lever

012672571
12350989: RNCC: 3 | RNVC: 2
12350989: RNCC: 5 | RNVC: 2
12350989: RNCC: 5 | RNVC: 2

7 Nov 1987

3040-01-268-3943
Straight Shaft

012683943
147764-1: RNCC: 3 | RNVC: 2
147764-1: RNCC: 5 | RNVC: 9
10106999: RNCC: 6 | RNVC: 9
147764: RNCC: D | RNVC: 9

29 Nov 1987

3040-01-259-8867
Straight Shaft

012598867
A02C2608-7: RNCC: 3 | RNVC: 2
A02C2608-2: RNCC: 5 | RNVC: 9
Z01C2608: RNCC: C | RNVC: 1
A02C2608: RNCC: C | RNVC: 1

22 Jul 1987

3040-01-260-2728
Manual Control Lever Assembly

012602728
9378637: RNCC: 3 | RNVC: 2

29 Jul 1987

3040-01-260-2090
Pump Mounting Flange

012602090
844181: RNCC: 3 | RNVC: 2

28 Jul 1987

3040-01-259-2307
Locking Sliding Sleeve

012592307
3051G31-001: RNCC: 3 | RNVC: 2
3051G31-001: RNCC: 5 | RNVC: 9
3051G31: RNCC: D | RNVC: 9

14 Jul 1987

3040-01-261-5010
Rigid Connecting Link

012615010
75A327426-2001: RNCC: 3 | RNVC: 9
75A327426-2001: RNCC: 5 | RNVC: 2
75A327426-2001: RNCC: 5 | RNVC: 9
75A327426-2001: RNCC: 5 | RNVC: 9
75A327426-2001: RNCC: 5 | RNVC: 9

14 Aug 1987

3040-01-262-6240
Linear Actuating Cylinder Assembly

012626240
709 1003: RNCC: 3 | RNVC: 2
600-1912: RNCC: 3 | RNVC: 9
709 1003: RNCC: 5 | RNVC: 9

30 Jun 2020

3040-01-262-7702
Pawl

012627702
202WN PC 16: RNCC: 3 | RNVC: 9

3 Sep 1987

3040-01-263-0768
Pawl

012630768
413-10704-1: RNCC: 3 | RNVC: 2

9 Sep 1987

3040-01-263-0785
Rigid Connecting Link

012630785
413-10656-1: RNCC: 3 | RNVC: 2

9 Sep 1987

3040-01-263-0787
Rigid Connecting Link

012630787
413-10641-1: RNCC: 3 | RNVC: 2

9 Sep 1987

3040-01-263-7214
Linear Actuating Cylinder Piston

012637214
C552833: RNCC: 3 | RNVC: 2
328073: RNCC: 5 | RNVC: 2
328073: RNCC: 5 | RNVC: 9

17 Sep 1987

3040-01-263-9923
Actuator Roller

012639923
4F63811-101A: RNCC: 3 | RNVC: 2
4F63811-101A: RNCC: 5 | RNVC: 9

23 Sep 1987

3040-01-264-3572
Push-Pull Control Assembly

012643572
4712BB5A-066: RNCC: 3 | RNVC: 2

29 Sep 1987

3040-01-264-3355
Straight Shaft

012643355
709F1738: RNCC: 3 | RNVC: 2

29 Sep 1987

3040-01-269-6600
Shaft Collar

012696600
16036-4: RNCC: 3 | RNVC: 2
231-31-421: RNCC: 5 | RNVC: 2

18 Dec 1987

3040-01-270-4324
Straight Shaft

012704324
111-218-080-414-002: RNCC: 3 | RNVC: 2
D414-5-5-487 ITEM 5: RNCC: 5 | RNVC: 2
D414-5-5-487: RNCC: D | RNVC: 9

6 Jan 1988

3040-01-270-7601
Manual Control Lever

012707601
12351246: RNCC: 3 | RNVC: 2

13 Jan 1988

3040-01-270-9414
Shouldered Shaft

012709414
102-218-080-420-003: RNCC: 3 | RNVC: 2
D420-2-12-396 ITEM 12: RNCC: 5 | RNVC: 2

15 Jan 1988

3040-01-271-1019
Shaft Collar

012711019
13282476: RNCC: 3 | RNVC: 9

18 Jan 1988

3040-01-271-9205
Flexible Shaft Assembly Casing

012719205
9133-301: RNCC: 3 | RNVC: 2
14979-901: RNCC: 3 | RNVC: 9
B-419-9133-301: RNCC: 5 | RNVC: 2
25306-901: RNCC: 5 | RNVC: 9
14979-901: RNCC: 5 | RNVC: 9

2 Feb 1988

3040-01-272-0854
Rigid Connecting Link

012720854
68A413043-1001: RNCC: 3 | RNVC: 2

4 Feb 1988

3040-01-272-6687
Shouldered Shaft Assembly

012726687
0501-062: RNCC: 3 | RNVC: 2
01-435-0353-4 PIECE 70: RNCC: 5 | RNVC: 2
60-311-0006-2: RNCC: 5 | RNVC: 9
01-435-0353-4: RNCC: D | RNVC: 9

12 Feb 1988

3040-01-273-3727
Rigid Connecting Link

012733727
3184910: RNCC: 3 | RNVC: 2
3184910: RNCC: 5 | RNVC: 2

24 Feb 1988

3040-01-273-7578
Rigid Connecting Link

012737578
70400-02154-053: RNCC: 3 | RNVC: 2
3040PL1949737: RNCC: 6 | RNVC: 9

1 Mar 1988

3040-01-274-1726
Straight Shaft

012741726
064-16380: RNCC: 3 | RNVC: 2
064-16380-000: RNCC: 3 | RNVC: 2
64-16380: RNCC: 5 | RNVC: 9
064-16380C: RNCC: 5 | RNVC: 9

5 Mar 1988

3040-01-275-2565
Straight Shaft

012752565
9376155: RNCC: 3 | RNVC: 2

19 Mar 1988

3040-01-279-5719
Remote Control Lever

012795719
6296646: RNCC: 3 | RNVC: 2

21 May 1988

3040-01-281-1513
Manual Control Lever

012811513
T418267: RNCC: 3 | RNVC: 2
T418267: RNCC: 3 | RNVC: 9

17 Jun 1988

3040-01-281-9856
Tachometer Cabl Kit

012819856
12357123: RNCC: 3 | RNVC: 2

6 Jul 1988

3040-01-282-8756
Control Cam

012828756
116297-1: RNCC: 3 | RNVC: 2

23 Jul 1988

3040-01-284-7276
Remote Control Lever

012847276
90-2330-3: RNCC: 3 | RNVC: 2

30 Aug 1988

3040-01-285-1301
Bell Crank

012851301
116097-1: RNCC: 3 | RNVC: 2

7 Sep 1988

3040-01-285-2736
Brake Disc

012852736
517843-3: RNCC: 3 | RNVC: 2
517843: RNCC: D | RNVC: 9
517845: RNCC: D | RNVC: 9
517844: RNCC: D | RNVC: 9

10 Sep 1988

3040-01-284-6151
Friction Lining

012846151
OSDC-493F: RNCC: 3 | RNVC: 9
OSDC-493F: RNCC: 5 | RNVC: 2

26 Aug 1988

3040-01-286-5750
Shouldered Shaft

012865750
12364327: RNCC: 3 | RNVC: 2

5 Oct 1988

3040-01-286-7662
Spur Gearshaft

012867662
A1022A137: RNCC: 3 | RNVC: 2

8 Oct 1988

3040-01-286-7746
Brake Backing Plate

012867746
12364307: RNCC: 3 | RNVC: 2

8 Oct 1988

3040-01-286-9880
Rigid Connecting Link

012869880
413-10608-501: RNCC: 3 | RNVC: 2

13 Oct 1988

3040-01-287-4047
Straight Shaft

012874047
117029-1: RNCC: 3 | RNVC: 2
117029-1: RNCC: 5 | RNVC: 9
117029: RNCC: D | RNVC: 9

21 Oct 1988

3040-01-287-4443
Worm Shaft

012874443
12599216: RNCC: 3 | RNVC: 2

22 Oct 1988

3040-01-287-7796
Extension Shaft

012877796
1366AS642: RNCC: 3 | RNVC: 2

27 Oct 1988

3040-01-287-9123
Rigid Connecting Link

012879123
LE22001: RNCC: 3 | RNVC: 2
LE22001: RNCC: C | RNVC: 1

29 Oct 1988

3040-01-289-5424
Shouldered Shaft

012895424
604920-2-RA: RNCC: 3 | RNVC: 2
604920-2-RA: RNCC: 3 | RNVC: 9

25 Nov 1988

3040-01-286-8651
Shaft Collar

012868651
1510: RNCC: 3 | RNVC: 2

9 Oct 1988

3040-01-289-8983
Rigid Connecting Link

012898983
16S1546-9: RNCC: 3 | RNVC: 2

2 Dec 1988

3040-01-292-2509
Straight Shaft

012922509
A1750-1: RNCC: 3 | RNVC: 2
A1750: RNCC: D | RNVC: 9

13 Jan 1989

3040-01-293-5765
Counterbalance Weight

012935765
4075750CL2: RNCC: 3 | RNVC: 2
4075750: RNCC: D | RNVC: 9

3 Feb 1989

3040-01-293-6041
Manual Control Lever

012936041
T25094: RNCC: 3 | RNVC: 2
T25094: RNCC: 5 | RNVC: 9

3 Feb 1989

3040-01-295-1996
Spur Gearshaft

012951996
735672: RNCC: 3 | RNVC: 2
10107010: RNCC: 6 | RNVC: 9

2 Mar 1989

3040-01-293-8593
Shaft Retaining Plate

012938593
6607523: RNCC: 3 | RNVC: 2
6607523: RNCC: 5 | RNVC: 9

8 Feb 1989

3040-01-295-3853
Spur Gearshaft

012953853
301-482-122-0: RNCC: 3 | RNVC: 2

4 Mar 1989

3040-01-297-2623
Straight Shaft

012972623
5266213: RNCC: 3 | RNVC: 2

31 Mar 1989

3040-01-297-7258
Straight Shaft

012977258
10862057: RNCC: 3 | RNVC: 2

6 Apr 1989

3040-01-298-2937
Linear Actuating Cylinder Assembly

012982937
1H000195587: RNCC: 3 | RNVC: 2
GG123543B0: RNCC: 5 | RNVC: 2

14 Apr 1989

3040-01-299-1575
Rigid Connecting Link

012991575
75A660008-1003: RNCC: 3 | RNVC: 2

26 Apr 1989

3040-01-300-8574
Mechanical Drive Housing

013008574
133.000.311: RNCC: 3 | RNVC: 2
17-000-894: RNCC: 5 | RNVC: 2

19 May 1989

3040-01-301-4300
Shaft Collar

013014300
6166837: RNCC: 3 | RNVC: 2

27 May 1989

3040-01-301-9123
Pivot Ball

013019123
364 991 00 15: RNCC: 3 | RNVC: 2

5 Jun 1989

3040-01-301-5405
Manual Control Lever

013015405
11672345: RNCC: 3 | RNVC: 2

31 May 1989

3040-01-302-7732
Ball Joint

013027732
10525275: RNCC: 1 | RNVC: 2
69049-1: RNCC: 3 | RNVC: 2
69049-1: RNCC: 5 | RNVC: 9

20 Jun 1989

3040-01-303-1151
Rigid Connecting Link

013031151
084567: RNCC: 3 | RNVC: 9
84567: RNCC: 5 | RNVC: 9
84567: RNCC: 5 | RNVC: 9
84567: RNCC: 5 | RNVC: 9
RE13/62: RNCC: 5 | RNVC: 9

24 Jun 1989

3040-01-303-2491
Shouldered Shaft

013032491
92088-991: RNCC: 3 | RNVC: 2
92088-991: RNCC: 3 | RNVC: 9
353 7874-001: RNCC: 5 | RNVC: 2
3537874-001: RNCC: 5 | RNVC: 9
10361093: RNCC: 6 | RNVC: 9

27 Jun 1989

3040-01-303-2566
Bell Crank

013032566
11671045: RNCC: 3 | RNVC: 2

27 Jun 1989

3040-01-303-3670
Shouldered Shaft

013033670
217104-1: RNCC: 3 | RNVC: 2

29 Jun 1989

3040-01-303-9205
Shouldered Shaft

013039205
17037: RNCC: 3 | RNVC: 2

7 Jul 1989

3040-01-303-0080
Mechanical Drive Housing

013030080
3523429: RNCC: 3 | RNVC: 2

23 Jun 1989

3040-01-304-4087
Shouldered Shaft

013044087
3829814-4: RNCC: 3 | RNVC: 2
3829814-4: RNCC: 5 | RNVC: 2
3829814-4: RNCC: 5 | RNVC: 9

18 Jul 1989

3040-01-304-8325
Control Cam

013048325
65751-03189-046: RNCC: 3 | RNVC: 2
65751-03189 PC 046: RNCC: 5 | RNVC: 9
65751-03189-046: RNCC: 5 | RNVC: 9
65751-03189: RNCC: D | RNVC: 9

27 Jul 1989

3040-01-306-6359
Guide Roller

013066359
721-011-001: RNCC: 3 | RNVC: 2
721-011-001: RNCC: 5 | RNVC: 9

27 Aug 1989

3040-01-305-8448
Linear Actuating Cylinder Assembly Parts Kit

013058448
T-85127-0-KIT 11THRU17: RNCC: 3 | RNVC: 2
T-85127-17: RNCC: 5 | RNVC: 9
T-85127-16: RNCC: 5 | RNVC: 9
58512750: RNCC: C | RNVC: 1

12 Aug 1989

3040-01-309-4138
Control Cam

013094138
30001-2010: RNCC: 3 | RNVC: 2
30001-001 FIND 24: RNCC: 5 | RNVC: 9
30001-001: RNCC: D | RNVC: 9

18 Oct 1989

3040-01-309-7522
Linear Actuating Cylinder Assembly

013097522
B-6600-D: RNCC: 3 | RNVC: 9
D-6600 W/B6600-D CAM: RNCC: 5 | RNVC: 2
D-6600 W/CAM: RNCC: 5 | RNVC: 9
D-6600: RNCC: 5 | RNVC: 9

22 Oct 1989

3040-01-308-8809
Chain Wear Guide

013088809
661923: RNCC: 3 | RNVC: 2
419 589 70 23: RNCC: D | RNVC: 9

6 Oct 1989

3040-01-310-0050
Shouldered Shaft

013100050
2527187-1: RNCC: 3 | RNVC: 2
2527187-1: RNCC: 5 | RNVC: 2
2527187: RNCC: D | RNVC: 9

27 Oct 1989

3040-01-310-2137
Flexible Shaft Assembly Casing

013102137
4059848: RNCC: 1 | RNVC: 2
441451-ISS1: RNCC: 3 | RNVC: 2
441451: RNCC: 3 | RNVC: 9
3040PL1601323: RNCC: 6 | RNVC: 9
3040PL0668463: RNCC: 6 | RNVC: 9

1 Nov 1989

3040-01-311-0109
Shouldered Shaft

013110109
12358399: RNCC: 3 | RNVC: 2
10196511: RNCC: 6 | RNVC: 9

17 Nov 1989

3040-01-311-8469
Bell Crank

013118469
74A733559-1001: RNCC: 3 | RNVC: 2
3929AS820: RNCC: 3 | RNVC: 2
74A733559-1001: RNCC: 5 | RNVC: 9
74A733559-1001: RNCC: 5 | RNVC: 9
10107014: RNCC: 6 | RNVC: 9
74A733559-1001: RNCC: C | RNVC: 1

6 Dec 1989

3040-01-313-0807
Rigid Connecting Link

013130807
711120-A: RNCC: 3 | RNVC: 2

31 Dec 1989

3040-01-313-5437
Straight Shaft

013135437
15741: RNCC: 3 | RNVC: 2

11 Jan 1990

3040-01-313-6121
Linear Actuating Cylinder Piston Rod

013136121
123-6130327 ITEM 4: RNCC: 3 | RNVC: 2
6130327-0004: RNCC: 5 | RNVC: 2
MCI460-112-3000: RNCC: 5 | RNVC: 9
123-6130327: RNCC: D | RNVC: 9

12 Jan 1990

3040-01-313-8844
Rigid Connecting Link

013138844
1285304-103: RNCC: 3 | RNVC: 9
1285304-103: RNCC: 5 | RNVC: 2
1285325-103: RNCC: 5 | RNVC: 9

19 Jan 1990

3040-01-314-2552
Straight Shaft

013142552
15746: RNCC: 3 | RNVC: 2

26 Jan 1990

3040-01-315-6007
Pivot Shaft Assembly

013156007
462345-3: RNCC: 3 | RNVC: 2

20 Feb 1990

3040-01-257-1579
Worm Wheel Gearshaft

012571579
122CA810-1TR: RNCC: 3 | RNVC: 2
122CA810-1TR: RNCC: 5 | RNVC: 2
122CA810: RNCC: D | RNVC: 9

12 Jun 1987

3040-01-258-2277
Counterbalance Weight

012582277
704AS3722-2: RNCC: 3 | RNVC: 2
704AS3722-2: RNCC: 5 | RNVC: 2
893722-2: RNCC: C | RNVC: 1

1 Jul 1987

3040-01-258-2244
Shaft Collar

012582244
3-214-5-00-901-07: RNCC: 3 | RNVC: 2
3-214-5-00-901-07: RNCC: 5 | RNVC: 9
3-214-5-00-901: RNCC: 5 | RNVC: 9
3040PL0943895: RNCC: 6 | RNVC: 9
3-214-5-00-901: RNCC: D | RNVC: 9

30 Jun 1987

3040-01-259-1102
Pawl

012591102
87552-2605 ITEM 4: RNCC: 3 | RNVC: 2
32-53-7864: RNCC: 3 | RNVC: 2
515-4674138 ITEM 4: RNCC: 5 | RNVC: 2
87552-2605: RNCC: D | RNVC: 9
515-4674138: RNCC: D | RNVC: 9

13 Jul 1987

3040-01-259-7942
Straight Shaft

012597942
814897: RNCC: 3 | RNVC: 2
814897: RNCC: 5 | RNVC: 9
814897: RNCC: 5 | RNVC: 9

22 Jul 1987

3040-01-289-8576
Pawl

012898576
16S1510-21: RNCC: 3 | RNVC: 2
16S1510-13: RNCC: 5 | RNVC: 9

1 Dec 1988

3040-01-290-4321
Remote Control Lever

012904321
BH-1870: RNCC: 3 | RNVC: 2
327208-01: RNCC: 5 | RNVC: 2

10 Dec 1988

3040-01-290-3584
Straight Shaft

012903584
1259-R-252: RNCC: 3 | RNVC: 2

9 Dec 1988

3040-01-291-2753
Shaft Retaining Plate

012912753
742096: RNCC: 3 | RNVC: 2

24 Dec 1988

3040-01-305-8012
Linear Actuating Cylinder Assembly

013058012
58440701: RNCC: 3 | RNVC: 2
T-84407-0: RNCC: 5 | RNVC: 9

11 Aug 1989

3040-01-307-6147
Shouldered Shaft

013076147
505-4457354 ITEM 43: RNCC: 3 | RNVC: 2
520-4498555 PC: RNCC: C | RNVC: 1
97-36-429: RNCC: C | RNVC: 1
505-4457354: RNCC: D | RNVC: 9

14 Sep 1989

3040-01-259-7388
Coupling

012597388
847411: RNCC: 3 | RNVC: 2

22 Jul 1987

3040-01-259-8613
Shouldered Shaft

012598613
414-646-000-315: RNCC: 3 | RNVC: 2
414-646-315: RNCC: 5 | RNVC: 9

22 Jul 1987

3040-01-263-9921
Shaft Collar

012639921
63B41375: RNCC: 3 | RNVC: 9

23 Sep 1987

3040-01-261-0141
Shouldered Shaft

012610141
192B6309AA1: RNCC: 3 | RNVC: 2
119D3916 PIECE 8: RNCC: 5 | RNVC: 9
192B6309AA1: RNCC: 5 | RNVC: 9
192B6309AA1: RNCC: C | RNVC: 1
75458-19-A: RNCC: C | RNVC: 1

7 Aug 1987

3040-01-292-5540
Shaft Retaining Plate

012925540
742798: RNCC: 3 | RNVC: 2

18 Jan 1989

3040-01-294-1655
Disk Brake Shoe

012941655
9240-032-28: RNCC: 3 | RNVC: 2
29-28: RNCC: 5 | RNVC: 2
9240-032-28: RNCC: C | RNVC: 1
9240-032: RNCC: D | RNVC: 9

11 Feb 1989

3040-01-301-4338
Linear Actuating Cylinder Assembly

013014338
TE01HAGD3AA16000: RNCC: 3 | RNVC: 2

27 May 1989

3040-01-300-3156
Rigid Connecting Link

013003156
12524487: RNCC: 3 | RNVC: 2

12 May 1989

3040-01-303-3778
Remote Control Lever

013033778
4F73221-103A: RNCC: 3 | RNVC: 2

29 Jun 1989

3040-01-303-6446
Rigid Connecting Link

013036446
3052233: RNCC: 3 | RNVC: 2

4 Jul 1989

3040-01-304-0839
Extension Shaft

013040839
AU-9(2.625 LONG): RNCC: 3 | RNVC: 2
5189117: RNCC: 7 | RNVC: 2

12 Jul 1989

3040-01-251-9671
Straight Shaft

012519671
F405-10811-10: RNCC: 3 | RNVC: 2

27 Mar 1987

3040-01-252-3450
Manual Control Lever

012523450
176C2546: RNCC: 3 | RNVC: 2

1 Apr 1987

3040-01-252-4286
Shaft Collar

012524286
8589486: RNCC: 3 | RNVC: 2

2 Apr 1987

3040-01-254-5288
Shouldered Shaft

012545288
12273143-1: RNCC: 1 | RNVC: 2
68514437857: RNCC: 3 | RNVC: 2
5051130: RNCC: 5 | RNVC: 9
5051105: RNCC: C | RNVC: 1
12273143: RNCC: D | RNVC: 9

7 May 1987

3040-01-255-3455
Nonrotating Shaft Eye Bracket

012553455
75A72039-003: RNCC: 3 | RNVC: 2

19 May 1987

3040-01-255-9133
Rigid Connecting Link

012559133
123CV10206-5: RNCC: 3 | RNVC: 2
123CV10206-5: RNCC: 5 | RNVC: 2
123CV10206-5: RNCC: 5 | RNVC: 9
123CV10206: RNCC: D | RNVC: 9

30 May 1987

3040-01-255-3655
Rigid Connecting Link

012553655
123CV10206-1: RNCC: 3 | RNVC: 2
123CV10206-1: RNCC: 5 | RNVC: 2
123CV10206-1: RNCC: 5 | RNVC: 9
PL123CV10206: RNCC: 5 | RNVC: 9
123CV10206: RNCC: D | RNVC: 9

19 May 1987

3040-01-256-1975
Mechanical Drive Housing

012561975
3867164-1: RNCC: 3 | RNVC: 2
3867164-1: RNCC: 5 | RNVC: 1
3867164-1: RNCC: 5 | RNVC: 9

3 Jun 1987

3040-01-256-7953
Rigid Connecting Link

012567953
214-010-715-105: RNCC: 3 | RNVC: 2
HSLK4-6: RNCC: 3 | RNVC: 2
AMSCBDOC: RNCC: 5 | RNVC: 2
HSLK4-8: RNCC: 5 | RNVC: 9
214-010-715: RNCC: D | RNVC: 9

9 Jun 1987

3040-01-256-8178
Main Rotor Tube Assembly

012568178
214-010-410-127: RNCC: 3 | RNVC: 2
214-010-410-117: RNCC: 5 | RNVC: 9
214-010-410-125: RNCC: 5 | RNVC: 9

9 Jun 1987

3040-01-257-1028
Linear Actuating Cylinder Piston

012571028
724026: RNCC: 3 | RNVC: 2
724026: RNCC: 5 | RNVC: 9

12 Jun 1987

3040-01-257-8753
Straight Shaft

012578753
905892: RNCC: 3 | RNVC: 2

25 Jun 1987

3040-01-257-8905
Rotating Shaft Eye Bracket

012578905
81421: RNCC: 3 | RNVC: 2

25 Jun 1987

3040-01-258-6760
Shouldered Shaft

012586760
5746902: RNCC: 3 | RNVC: 2
5746889 PIECE 6: RNCC: 5 | RNVC: 2
5746902: RNCC: C | RNVC: 1
5746889: RNCC: D | RNVC: 9

6 Jul 1987

3040-01-264-9134
Shouldered Shaft

012649134
405-10612-516: RNCC: 3 | RNVC: 2

8 Oct 1987

3040-01-265-2608
Shouldered Shaft

012652608
324450: RNCC: 3 | RNVC: 9
5156310090: RNCC: 5 | RNVC: 2
324450: RNCC: 5 | RNVC: 9
5156310090: RNCC: 5 | RNVC: 9

11 Oct 1987

3040-01-259-8157
Rigid Connecting Link

012598157
75A326692-2001: RNCC: 3 | RNVC: 9
75A326692-2001: RNCC: 5 | RNVC: 2
75A326692-2001: RNCC: 5 | RNVC: 9
75A326692-2001: RNCC: 5 | RNVC: 9

22 Jul 1987

3040-01-265-6097
Rigid Connecting Link

012656097
55401-40110: RNCC: 3 | RNVC: 2

17 Oct 1987

3040-01-260-1062
Mechanical Drive Housing

012601062
16K0585-11: RNCC: 3 | RNVC: 2
3040PL0667946: RNCC: 6 | RNVC: 9

25 Jul 1987

3040-01-260-4475
Body Hub

012604475
22045-1: RNCC: 3 | RNVC: 2

31 Jul 1987

3040-01-266-1772
Manual Control Lever

012661772
1650C305: RNCC: 3 | RNVC: 2

21 Oct 1987

3040-01-266-7195
Cylinder Repair Kit

012667195
57326951: RNCC: 3 | RNVC: 2
787AS282-14: RNCC: 5 | RNVC: 2
999-073269051: RNCC: 5 | RNVC: 9

30 Oct 1987

3040-01-267-2099
Bell Crank

012672099
845B1117-2: RNCC: 3 | RNVC: 2
845B1117-1: RNCC: D | RNVC: 9

6 Nov 1987

3040-01-268-5340
Straight Shaft

012685340
231876: RNCC: 3 | RNVC: 2
9-904-101381: RNCC: 5 | RNVC: 2
231876: RNCC: 5 | RNVC: 9

2 Dec 1987

3040-01-268-5887
Manual Control Lever

012685887
291AS429: RNCC: 3 | RNVC: 2

3 Dec 1987

3040-01-261-5241
Shaft Collar

012615241
202116-001: RNCC: 3 | RNVC: 9

14 Aug 1987

3040-01-262-0794
Straight Shaft

012620794
B-122437: RNCC: 3 | RNVC: 2

22 Aug 1987

3040-01-262-4955
Rigid Connecting Link

012624955
3819-019: RNCC: 3 | RNVC: 2
9987-824 ITEM 11: RNCC: 5 | RNVC: 2
9987-824: RNCC: D | RNVC: 9

29 Aug 1987

3040-01-261-2380
Flexible Shaft Assembly

012612380
1358-MD2-01321: RNCC: 3 | RNVC: 2

11 Aug 1987

3040-01-261-2388
Straight Shaft

012612388
1358-MD2-0132: RNCC: 3 | RNVC: 2

11 Aug 1987

3040-01-262-1197
Manual Control Lever

012621197
1324352: RNCC: 3 | RNVC: 2
309098: RNCC: 5 | RNVC: 9

22 Aug 1987

3040-01-262-9989
Hose Reel Brake Wheel Assembly

012629989
405-10666-501: RNCC: 3 | RNVC: 2

9 Sep 1987

3040-01-263-3137
Carrier Assembly Planetary Cover

012633137
A88434037: RNCC: 3 | RNVC: 2
SA88434037: RNCC: 5 | RNVC: 9
88 434 019: RNCC: 5 | RNVC: 9
206861: RNCC: 5 | RNVC: 9
SA88434018: RNCC: 5 | RNVC: 9

12 Sep 1987

3040-01-263-7094
Electrical-Fluid Pressure Connector Assembly

012637094
5681-89: RNCC: 3 | RNVC: 2

17 Sep 1987

3040-01-264-2089
Remote Control Lever

012642089
3039164: RNCC: 3 | RNVC: 2
04.03 OPTION BP6042 REFERENCE 7: RNCC: 5 | RNVC: 2
04.03 OPTION BP6042/7: RNCC: 5 | RNVC: 2
3039164: RNCC: 5 | RNVC: 2
3028088: RNCC: 5 | RNVC: 9

27 Sep 1987

3040-01-268-9908
Rigid Connecting Link

012689908
172842H1: RNCC: 3 | RNVC: 9
172842H1: RNCC: 5 | RNVC: 2

10 Dec 1987

3040-01-269-2323
Friction Lining

012692323
2B1-2415: RNCC: 3 | RNVC: 2

13 Dec 1987

3040-01-269-0011
Shaft Retaining Plate

012690011
5893890: RNCC: 3 | RNVC: 2

10 Dec 1987

3040-01-270-5933
Rigid Connecting Link

012705933
12314649: RNCC: 3 | RNVC: 2
12314649: RNCC: 5 | RNVC: 9

9 Jan 1988

3040-01-270-5852
Straight Shaft

012705852
4849918-4: RNCC: 3 | RNVC: 2
4849912 PIECE 4: RNCC: 5 | RNVC: 2
4849918: RNCC: D | RNVC: 9
4849912: RNCC: D | RNVC: 9

9 Jan 1988

3040-01-270-5934
Rigid Connecting Link

012705934
12314656: RNCC: 3 | RNVC: 2
12314656: RNCC: 5 | RNVC: 9

9 Jan 1988

3040-01-271-9186
Mechanical Drive Housing

012719186
4100019-1: RNCC: 3 | RNVC: 2
4100019-1: RNCC: 3 | RNVC: 9

2 Feb 1988

3040-01-270-7775
Remote Control Lever

012707775
L3010099-005: RNCC: 3 | RNVC: 2

13 Jan 1988

3040-01-273-1080
Shouldered Shaft

012731080
4847471: RNCC: 3 | RNVC: 2
4847471: RNCC: 5 | RNVC: 2

19 Feb 1988

3040-01-273-5595
Straight Shaft

012735595
0016B0807K081A: RNCC: 3 | RNVC: 2
PL-E-849 PIECE 4: RNCC: 5 | RNVC: 9
016B0807: RNCC: C | RNVC: 1

26 Feb 1988

3040-01-273-7579
Rigid Connecting Link

012737579
70400-02154-054: RNCC: 3 | RNVC: 2
3040PL1951577: RNCC: 6 | RNVC: 9

1 Mar 1988

3040-01-273-7675
Pivot Rod

012737675
2532120: RNCC: 3 | RNVC: 2

1 Mar 1988

3040-01-273-9242
Mechanical Drive Housing

012739242
134-1447: RNCC: 3 | RNVC: 2

3 Mar 1988

3040-01-275-0625
Rotary Actuating Cylinder Assembly

012750625
46-1519: RNCC: 3 | RNVC: 2

17 Mar 1988

3040-01-275-2537
Rigid Connecting Link

012752537
149-1864: RNCC: 3 | RNVC: 2

19 Mar 1988

3040-01-275-2511
Brake Disc

012752511
K090122-001: RNCC: 3 | RNVC: 2

19 Mar 1988

3040-01-275-4308
Brake Backing Plate

012754308
AB-141: RNCC: 3 | RNVC: 9

21 Mar 1988

3040-01-275-9599
Shaft Collar

012759599
5873754-101: RNCC: 3 | RNVC: 2
5873754-101: RNCC: 3 | RNVC: 9
10107002: RNCC: 6 | RNVC: 9
5873754: RNCC: D | RNVC: 9

30 Mar 1988

3040-01-276-3592
Rigid Connecting Link

012763592
SRK-167: RNCC: 3 | RNVC: 2

8 Apr 1988

3040-01-275-1767
Rigid Connecting Link

012751767
12351509: RNCC: 3 | RNVC: 2
12351509: RNCC: 5 | RNVC: 2
12351509: RNCC: 5 | RNVC: 9

18 Mar 1988

3040-01-276-8727
Rigid Connecting Link

012768727
214-060-166-101: RNCC: 3 | RNVC: 2
214-060-166: RNCC: D | RNVC: 9

14 Apr 1988

3040-01-278-1903
Pawl

012781903
11460446: RNCC: 3 | RNVC: 2

3 May 1988

3040-01-278-7383
Straight Shaft

012787383
02-2445-01: RNCC: 3 | RNVC: 2
FDE474 PAGE 7 ITEM 18: RNCC: C | RNVC: 1

8 May 1988

3040-01-279-0292
Rigid Connecting Link

012790292
NB22703725: RNCC: 3 | RNVC: 2
E3650 2.00IN PC NO 20: RNCC: 5 | RNVC: 2
22703725: RNCC: 5 | RNVC: 9
B227037-25: RNCC: C | RNVC: 1

12 May 1988

3040-01-278-8736
Manual Control Lever

012788736
A-5K-14G-BK: RNCC: 3 | RNVC: 2
A-5K-14G-BK: RNCC: 5 | RNVC: 9
11463902: RNCC: 7 | RNVC: 2

11 May 1988

3040-01-279-1762
Shouldered Shaft

012791762
23488.658-1: RNCC: 3 | RNVC: 2
23488.675 ITEM 1: RNCC: 5 | RNVC: 2

16 May 1988

3040-01-279-5114
Friction Lining

012795114
2A1-750-4: RNCC: 3 | RNVC: 2

20 May 1988

3040-01-281-1511
Spur Gearshaft

012811511
HLK-316: RNCC: 3 | RNVC: 2
HLK-316: RNCC: 3 | RNVC: 9
HLK-316: RNCC: 5 | RNVC: 9
HLK-316: RNCC: 5 | RNVC: 9

17 Jun 1988

3040-01-281-5998
Push-Pull Control Assembly

012815998
CCX63332: RNCC: 3 | RNVC: 2
5967875ITEM111: RNCC: 5 | RNVC: 2
301947-003-32FT: RNCC: 5 | RNVC: 9
301947-003-0384.10: RNCC: 5 | RNVC: 9
301947-03-384.0: RNCC: 5 | RNVC: 9
301947-003-32FT: RNCC: 5 | RNVC: 9
301947-003-0384.10: RNCC: 5 | RNVC: 9
5967875: RNCC: D | RNVC: 9

28 Jun 1988

3040-01-282-8536
Shouldered Shaft

012828536
C9203-15: RNCC: 3 | RNVC: 2
D1154 FIND 17: RNCC: 5 | RNVC: 2
C9203: RNCC: D | RNVC: 9

23 Jul 1988

3040-01-282-0151
Shouldered Shaft

012820151
6289023: RNCC: 3 | RNVC: 2
6289023: RNCC: 5 | RNVC: 2

6 Jul 1988

3040-01-284-2279
Linear Actuating Cylinder Assembly Parts Kit

012842279
PK402HK001: RNCC: 3 | RNVC: 2

19 Aug 1988

3040-01-285-0748
Helical Gearshaft

012850748
50395-0519: RNCC: 3 | RNVC: 2
01113-0365-4 ITEM 3-21: RNCC: 5 | RNVC: 2

6 Sep 1988

3040-01-285-0749
Linear Actuating Cylinder Assembly

012850749
2226090: RNCC: 3 | RNVC: 2
2AH471: RNCC: 5 | RNVC: 2
EAA-8700-90U: RNCC: 5 | RNVC: 2
1872-45A258: RNCC: 5 | RNVC: 2
EAA-8700-U: RNCC: 5 | RNVC: 9
2AH471: RNCC: 5 | RNVC: 9
2AH471: RNCC: 5 | RNVC: 9
2226090: RNCC: 5 | RNVC: 9
2AH471: RNCC: 5 | RNVC: 9
45A258: RNCC: 5 | RNVC: 9

6 Sep 1988

3040-01-285-1394
Control Cam

012851394
B4123-13: RNCC: 3 | RNVC: 2

7 Sep 1988

3040-01-285-2272
Remote Control Lever

012852272
116129-4: RNCC: 3 | RNVC: 2

9 Sep 1988

3040-01-285-3112
Pawl

012853112
116286-1: RNCC: 3 | RNVC: 2

10 Sep 1988

3040-01-285-6330
Rigid Connecting Link

012856330
289335-103: RNCC: 3 | RNVC: 2
289335-103: RNCC: 5 | RNVC: 1

17 Sep 1988

3040-01-285-6385
Control Cam

012856385
7002761-2: RNCC: 3 | RNVC: 2
7002761-2: RNCC: 5 | RNVC: 9

17 Sep 1988

3040-01-286-5782
Rotating Shaft Eye Bracket

012865782
12364185: RNCC: 3 | RNVC: 2

5 Oct 1988

3040-01-286-7626
Shouldered Shaft

012867626
717535080-001: RNCC: 3 | RNVC: 2
717535080: RNCC: D | RNVC: 9

8 Oct 1988

3040-01-286-1133
Shouldered Shaft

012861133
11450119-1: RNCC: 3 | RNVC: 2
11450119-1: RNCC: 5 | RNVC: 1

27 Sep 1988

3040-01-286-2060
Rigid Connecting Link

012862060
1500AS240-1: RNCC: 3 | RNVC: 2
1500AS240: RNCC: D | RNVC: 9

28 Sep 1988

3040-01-287-4144
Linear Actuating Cylinder Assembly

012874144
872612: RNCC: 3 | RNVC: 2
853439-8: RNCC: 5 | RNVC: 2
872612-7: RNCC: 5 | RNVC: 9
853439: RNCC: 5 | RNVC: 9
852755-8: RNCC: C | RNVC: 1

21 Oct 1988

3040-01-287-4049
Shouldered Shaft

012874049
1366AS220: RNCC: 3 | RNVC: 2

21 Oct 1988

3040-01-288-8001
Bell Crank

012888001
5SE00980-1: RNCC: 3 | RNVC: 9
5SE00980: RNCC: D | RNVC: 9

14 Nov 1988

3040-01-289-1416
Flexible Drive Shaft

012891416
05108089: RNCC: 3 | RNVC: 2
1338-38: RNCC: 5 | RNVC: 9

17 Nov 1988

3040-01-289-2366
Shouldered Shaft

012892366
101BMP-8-1: RNCC: 3 | RNVC: 2
101BMP-8-1: RNCC: 5 | RNVC: 9
101BMP-8-1: RNCC: C | RNVC: 1
101BMP-8-1: RNCC: C | RNVC: 1

18 Nov 1988

3040-01-289-4297
Hydraulic Accumulator Cylinder

012894297
6600344: RNCC: 3 | RNVC: 2
6600344: RNCC: 5 | RNVC: 2
6600344: RNCC: 5 | RNVC: 2
6600344: RNCC: 5 | RNVC: 9
6600344: RNCC: 5 | RNVC: 9
6600344: RNCC: 5 | RNVC: 9

22 Nov 1988

3040-01-290-1121
Flexible Shaft Assembly

012901121
C101-10: RNCC: 3 | RNVC: 2
C101: RNCC: 5 | RNVC: 9

6 Dec 1988

3040-01-290-6760
Rigid Connecting Link

012906760
5598310: RNCC: 3 | RNVC: 2
12341651: RNCC: 3 | RNVC: 2

15 Dec 1988

3040-01-290-6555
Rigid Connecting Link

012906555
209-062-758-101: RNCC: 3 | RNVC: 2

14 Dec 1988

3040-01-291-5844
Straight Shaft

012915844
3198-T-1060: RNCC: 3 | RNVC: 2

30 Dec 1988

3040-01-298-2932
Linear Actuating Cylinder Assembly

012982932
GG123204B0: RNCC: 3 | RNVC: 2

14 Apr 1989

3040-01-298-2933
Linear Actuating Cylinder Assembly

012982933
GG123204C0: RNCC: 3 | RNVC: 2

14 Apr 1989

3040-01-298-4295
Linear Actuating Cylinder Assembly

012984295
419 553 72 05: RNCC: 3 | RNVC: 2
419 553 72 05: RNCC: 5 | RNVC: 9
419 553 72 05: RNCC: C | RNVC: 1

16 Apr 1989

3040-01-299-1161
Multiple Gears Gearshaft

012991161
10029103: RNCC: 3 | RNVC: 2

25 Apr 1989

3040-01-299-4074
Linear Actuating Cylinder Assembly Parts Kit

012994074
1543294C1: RNCC: 3 | RNVC: 2
1543294C1: RNCC: 3 | RNVC: 2
G109504: RNCC: 5 | RNVC: 9
G109504: RNCC: 5 | RNVC: 9
G105563: RNCC: C | RNVC: 1
G105563: RNCC: C | RNVC: 1

30 Apr 1989

3040-01-299-9738
Bell Crank

012999738
10527110: RNCC: 3 | RNVC: 2

9 May 1989

3040-01-303-2568
Rigid Connecting Link

013032568
89349: RNCC: 3 | RNVC: 2
89349: RNCC: 5 | RNVC: 9
89349: RNCC: 5 | RNVC: 9
LE372/82A: RNCC: 5 | RNVC: 9

27 Jun 1989

3040-01-300-0142
Straight Shaft

013000142
R77-55-2249: RNCC: 3 | RNVC: 2

9 May 1989

3040-01-301-5952
Rigid Connecting Link

013015952
65396-06032-102: RNCC: 3 | RNVC: 2

1 Jun 1989

3040-01-301-5842
Shouldered Shaft

013015842
214-040-628-101: RNCC: 3 | RNVC: 2

1 Jun 1989

3040-01-304-4508
Shouldered Shaft

013044508
B2702-1: RNCC: 3 | RNVC: 2

19 Jul 1989

3040-01-305-3366
Rigid Connecting Link

013053366
65130-07153-101: RNCC: 3 | RNVC: 2
65130-07153-101: RNCC: 5 | RNVC: 9
65130-07153: RNCC: D | RNVC: 9

3 Aug 1989

3040-01-305-5697
Shouldered Shaft

013055697
3643961: RNCC: 3 | RNVC: 2
3626952: RNCC: 5 | RNVC: 9
362695200: RNCC: 5 | RNVC: 9
3050442: RNCC: 5 | RNVC: 9
3050442: RNCC: 5 | RNVC: 9
3626952: RNCC: 5 | RNVC: 9
3634049: RNCC: 5 | RNVC: 9

8 Aug 1989

3040-01-305-8976
Linear Actuating Cylinder Assembly Parts Kit

013058976
T-84406-0-51: RNCC: 3 | RNVC: 2

12 Aug 1989

3040-01-305-9851
Straight Shaft

013059851
B522C145: RNCC: 3 | RNVC: 2
H522C001 ITEM 144: RNCC: 5 | RNVC: 2

15 Aug 1989

3040-01-307-5792
Rigid Connecting Link

013075792
1308707-107: RNCC: 3 | RNVC: 2
1308707-107: RNCC: 3 | RNVC: 2

13 Sep 1989

3040-01-308-7097
Rigid Connecting Link

013087097
89-1000-15: RNCC: 3 | RNVC: 9
145CS340-15: RNCC: 7 | RNVC: 2

3 Oct 1989

3040-01-309-5347
Straight Shaft

013095347
3174178-1: RNCC: 3 | RNVC: 2

19 Oct 1989

3040-01-309-8169
Control Cam

013098169
24249: RNCC: 3 | RNVC: 2
P-24249: RNCC: 5 | RNVC: 9

24 Oct 1989

3040-01-310-0038
Shaft Collar

013100038
9459M31P13: RNCC: 3 | RNVC: 2
9459M31P13: RNCC: 3 | RNVC: 9
9459M31: RNCC: D | RNVC: 9

27 Oct 1989

3040-01-311-3243
Linear Actuating Cylinder Assembly

013113243
1H2H0A00277299: RNCC: 3 | RNVC: 2
GG122908J0: RNCC: 5 | RNVC: 9

23 Nov 1989

3040-01-311-1672
Shouldered Shaft

013111672
9031D04-1: RNCC: 3 | RNVC: 2
9031D04-1: RNCC: 5 | RNVC: 9

21 Nov 1989

3040-01-311-5444
Linear Actuating Cylinder Assembly

013115444
1366AS140: RNCC: 3 | RNVC: 2
1366AS140: RNCC: 5 | RNVC: 2
500537: RNCC: 5 | RNVC: 9
1366AS140: RNCC: 5 | RNVC: 9

1 Dec 1989

3040-01-312-5067
Shouldered Shaft

013125067
164-218-260-777-000: RNCC: 3 | RNVC: 2
D777-13-061 ITEM 85: RNCC: 5 | RNVC: 2
D777-13-061: RNCC: D | RNVC: 9

17 Dec 1989

3040-01-313-0707
Shouldered Shaft

013130707
9380308: RNCC: 3 | RNVC: 2

31 Dec 1989

3040-01-314-9313
Shouldered Shaft

013149313
53100081-2: RNCC: 3 | RNVC: 2
53100081-2: RNCC: 5 | RNVC: 9
53100081: RNCC: D | RNVC: 9

8 Feb 1990

3040-01-315-4968
Straight Shaft

013154968
701375-01: RNCC: 3 | RNVC: 9
10560795: RNCC: 5 | RNVC: 2

16 Feb 1990

3040-01-291-8241
Remote Control Lever

012918241
12352781-1: RNCC: 3 | RNVC: 2
12352781: RNCC: D | RNVC: 9

6 Jan 1989

3040-01-291-2751
Remote Control Lever

012912751
16S1544-9: RNCC: 3 | RNVC: 2

24 Dec 1988

3040-01-293-5764
Counterbalance Weight

012935764
4075750CL1: RNCC: 3 | RNVC: 2

3 Feb 1989

3040-01-293-8547
Straight Shaft

012938547
6601892: RNCC: 3 | RNVC: 2
6601892: RNCC: 5 | RNVC: 9

8 Feb 1989

3040-01-294-7232
Straight Shaft

012947232
6601302: RNCC: 3 | RNVC: 2
6601302: RNCC: 5 | RNVC: 9

22 Feb 1989

3040-01-289-1636
Shaft Collar

012891636
3518980: RNCC: 3 | RNVC: 2
2EL957: RNCC: 5 | RNVC: 2
2EL957: RNCC: 5 | RNVC: 9
3040PL0823206: RNCC: 6 | RNVC: 9
3518980: RNCC: C | RNVC: 1

18 Nov 1988

3040-01-289-8578
Rigid Connecting Link

012898578
16S1518-9: RNCC: 3 | RNVC: 2
16S1518-9: RNCC: 5 | RNVC: 2

1 Dec 1988

3040-01-290-6557
Engine Control Tube Assembly

012906557
209-062-758-105: RNCC: 3 | RNVC: 2

14 Dec 1988

3040-01-291-2750
Remote Control Lever

012912750
7002572-2: RNCC: 3 | RNVC: 2
7002752-1: RNCC: 5 | RNVC: 9

24 Dec 1988

3040-01-311-5591
Shouldered Shaft

013115591
4G33076-101A: RNCC: 3 | RNVC: 2

1 Dec 1989

3040-01-312-2938
Flexible Drive Shaft

013122938
9380316-1: RNCC: 1 | RNVC: 2
FAUSG12MZ1: RNCC: 3 | RNVC: 2
B-404-9398-101: RNCC: 5 | RNVC: 2
0312-18770-Y-022.75: RNCC: 5 | RNVC: 9

13 Dec 1989

3040-01-313-0806
Rigid Connecting Link

013130806
715144 K1: RNCC: 3 | RNVC: 2

31 Dec 1989

3040-01-251-9672
Shouldered Shaft

012519672
F405-10811-11: RNCC: 3 | RNVC: 2

27 Mar 1987

3040-01-252-3710
Shouldered Shaft

012523710
5168465: RNCC: 3 | RNVC: 2
5168465: RNCC: 3 | RNVC: 2

1 Apr 1987

3040-01-252-4240
Rigid Connecting Link

012524240
311-5750041-031: RNCC: 3 | RNVC: 2

2 Apr 1987

3040-01-253-1101
Dual Disk Brake

012531101
D-1704ADF: RNCC: 3 | RNVC: 1
DGR4350B PT70: RNCC: 5 | RNVC: 2
DGR4350C PT70: RNCC: 5 | RNVC: 2
D-1704ADFVM: RNCC: 5 | RNVC: 2
DGR4350C PT70VM: RNCC: 5 | RNVC: 2
DGR4350B PT70VM: RNCC: 5 | RNVC: 2

11 Apr 1987

3040-01-253-9590
Nonrotating Shaft Eye Bracket

012539590
8P4211: RNCC: 3 | RNVC: 2

28 Apr 1987

3040-01-254-4935
Straight Shaft

012544935
65693: RNCC: 3 | RNVC: 2

5 May 1987

3040-01-254-0400
Single Disk Brake

012540400
C-21784-PC26: RNCC: 3 | RNVC: 9
C-16695 FIND NO 36: RNCC: 5 | RNVC: 9
C-934: RNCC: 5 | RNVC: 9

30 Apr 1987

3040-01-254-8759
Bell Crank

012548759
209-064-722-101: RNCC: 3 | RNVC: 2
209-064-722: RNCC: D | RNVC: 9

12 May 1987

3040-01-254-9933
Rigid Connecting Link

012549933
PW127: RNCC: 3 | RNVC: 9

14 May 1987

3040-01-256-3716
Flexible Shaft Assembly Core

012563716
57353-350: RNCC: 3 | RNVC: 2

4 Jun 1987

3040-01-256-3711
Flexible Shaft Assembly Core

012563711
57353-100: RNCC: 3 | RNVC: 2

4 Jun 1987

3040-01-258-6761
Shouldered Shaft

012586761
5746903: RNCC: 3 | RNVC: 2
5746889 PIECE 7: RNCC: 5 | RNVC: 2
5746903: RNCC: C | RNVC: 1
5746889: RNCC: D | RNVC: 9

6 Jul 1987

3040-01-259-7623
Pawl

012597623
2825806-1: RNCC: 3 | RNVC: 2
2825806-1: RNCC: 5 | RNVC: 2
2825806: RNCC: D | RNVC: 9

22 Jul 1987

3040-01-259-7311
Rigid Connecting Link

012597311
147793-1: RNCC: 3 | RNVC: 2
147793-1: RNCC: 5 | RNVC: 9
10106993: RNCC: 6 | RNVC: 9

21 Jul 1987

3040-01-260-0028
Shouldered Shaft

012600028
033498: RNCC: 3 | RNVC: 2
033498: RNCC: 5 | RNVC: 2
033498: RNCC: 5 | RNVC: 9

24 Jul 1987

3040-01-264-4756
Linear Actuating Cylinder Piston

012644756
3010330-301: RNCC: 3 | RNVC: 2
3010330-301: RNCC: 3 | RNVC: 9
3010330-301: RNCC: 5 | RNVC: 9

2 Oct 1987

3040-01-265-6103
Rigid Connecting Link

012656103
55401-40070: RNCC: 3 | RNVC: 2

17 Oct 1987

3040-01-266-2122
Mechanical Drive Housing

012662122
8679960: RNCC: 3 | RNVC: 2
8627435: RNCC: 5 | RNVC: 9
8627435: RNCC: 5 | RNVC: 9
8679960: RNCC: 5 | RNVC: 9
8627435: RNCC: C | RNVC: 1

22 Oct 1987

3040-01-266-8195
Drive Shaft Assembly

012668195
PWA56018-40: RNCC: 3 | RNVC: 2
PWA56018: RNCC: D | RNVC: 9

30 Oct 1987

3040-01-267-4283
Shaft Collar

012674283
RK-T-61: RNCC: 3 | RNVC: 2
XA-T-61-SR: RNCC: 5 | RNVC: 9
14067788: RNCC: D | RNVC: 9

11 Nov 1987

3040-01-268-1492
Flexible Shaft Assembly Core

012681492
RC861-A04BN3: RNCC: 3 | RNVC: 2
207703: RNCC: 5 | RNVC: 2
RC861-4BN1: RNCC: 5 | RNVC: 9

23 Nov 1987

3040-01-268-2498
Shaft Retaining Plate

012682498
206916: RNCC: 3 | RNVC: 2
4046754: RNCC: 3 | RNVC: 2

26 Nov 1987

3040-01-260-8390
Linear Actuating Cylinder Assembly

012608390
02-60132-2: RNCC: 3 | RNVC: 2
02601322: RNCC: 5 | RNVC: 2
02-60132-1: RNCC: C | RNVC: 1
02-60132: RNCC: D | RNVC: 9

5 Aug 1987

3040-01-263-1519
Rigid Connecting Link

012631519
209-064-132-109: RNCC: 3 | RNVC: 2
209-064-132-101: RNCC: 5 | RNVC: 9

9 Sep 1987

3040-01-263-3192
Linear Actuating Cylinder Cap

012633192
1321149: RNCC: 3 | RNVC: 2
375632: RNCC: 5 | RNVC: 9

12 Sep 1987

3040-01-263-3241
Bell Crank

012633241
709F1109: RNCC: 3 | RNVC: 2

12 Sep 1987

3040-01-263-7268
Rigid Connecting Link

012637268
2025-1: RNCC: 3 | RNVC: 2
70400-02252-113: RNCC: 5 | RNVC: 2
70400-02252-113: RNCC: 5 | RNVC: 9
SR11613S: RNCC: 5 | RNVC: 9
2025: RNCC: D | RNVC: 9

17 Sep 1987

3040-01-269-1601
Shouldered Shaft

012691601
7-810-001165: RNCC: 3 | RNVC: 2

12 Dec 1987

3040-01-269-2355
Manual Control Lever

012692355
8446859: RNCC: 3 | RNVC: 2
8772635: RNCC: C | RNVC: 1

13 Dec 1987

3040-01-270-2557
Remote Control Lever

012702557
A145B010: RNCC: 3 | RNVC: 2
H145B001 ITEM 9: RNCC: 5 | RNVC: 2
H145B001: RNCC: D | RNVC: 9

1 Jan 1988

3040-01-270-5855
Shouldered Shaft

012705855
006-7100028-302: RNCC: 3 | RNVC: 2
728-0028-237: RNCC: 3 | RNVC: 2
728-0028-237: RNCC: 5 | RNVC: 9
AB7220106-000 PIECE 6: RNCC: 5 | RNVC: 9
728-0028-235: RNCC: 5 | RNVC: 9
006-7100028-237: RNCC: 5 | RNVC: 9
728-0028-237: RNCC: 5 | RNVC: 9
AB7220106-000 PIECE 6: RNCC: 5 | RNVC: 9
006-7100-028-302 REV H: RNCC: 5 | RNVC: 9
AB7220106-000: RNCC: D | RNVC: 9

9 Jan 1988

3040-01-271-6049
Strip

012716049
10524006: RNCC: 3 | RNVC: 2
308-0731: RNCC: 5 | RNVC: 2

28 Jan 1988

Load More Results