What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 120 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 120 of 300

3040-01-370-1397
Linear Actuating Cylinder Piston Rod

013701397
6-768-002484: RNCC: 3 | RNVC: 2
6-768-002484: RNCC: 5 | RNVC: 2
6-768-002484: RNCC: 5 | RNVC: 2

14 Jan 1993

3040-01-329-2572
Rigid Connecting Link

013292572
740200-13: RNCC: 3 | RNVC: 2
740200: RNCC: D | RNVC: 9

14 Nov 1990

3040-01-329-9878
Shouldered Shaft

013299878
ER-62793: RNCC: 3 | RNVC: 2
ER-62793: RNCC: 5 | RNVC: 2
ER-62793: RNCC: 5 | RNVC: 2
ER-62793: RNCC: 5 | RNVC: 9
ER-62793: RNCC: 5 | RNVC: 9

28 Nov 1990

3040-01-329-9926
Mechanical Drive Housing

013299926
A-3226-R-1006: RNCC: 3 | RNVC: 2
A-3226-R-1006: RNCC: 5 | RNVC: 2
1656924C91: RNCC: 5 | RNVC: 2

28 Nov 1990

3040-01-316-9686
Shouldered Shaft

013169686
P33325: RNCC: 3 | RNVC: 2
P33325-SN8931000351: RNCC: 5 | RNVC: 2
P33325-SN8931000332: RNCC: 5 | RNVC: 2

19 Mar 1990

3040-01-319-1257
Counterbalance Weight

013191257
4069002: RNCC: 3 | RNVC: 2

2 May 1990

3040-01-319-1258
Counterbalance Weight

013191258
4069995: RNCC: 3 | RNVC: 2

2 May 1990

3040-01-319-8959
Bell Crank

013198959
2677198: RNCC: 3 | RNVC: 2

16 May 1990

3040-01-320-1784
Linear Actuating Cylinder Assembly

013201784
5-51903: RNCC: 3 | RNVC: 2
1910830: RNCC: 5 | RNVC: 9

22 May 1990

3040-01-320-4260
Rigid Connecting Link

013204260
4071328: RNCC: 3 | RNVC: 2
4071328: RNCC: 5 | RNVC: 2
4071328: RNCC: 5 | RNVC: 9
3040PL0668556: RNCC: 6 | RNVC: 9

24 May 1990

3040-01-320-4716
Rigid Connecting Link

013204716
4075589-01: RNCC: 3 | RNVC: 2
4075589-01: RNCC: 5 | RNVC: 2
3040PL0668591: RNCC: 6 | RNVC: 9

25 May 1990

3040-01-320-5525
Rigid Connecting Link

013205525
4075592-01: RNCC: 3 | RNVC: 2
3040PL0668593: RNCC: 6 | RNVC: 9

26 May 1990

3040-01-320-9507
Rigid Connecting Link

013209507
4071186-01: RNCC: 3 | RNVC: 2
3040PL0668953: RNCC: 6 | RNVC: 9

6 Jun 1990

3040-01-320-9508
Rigid Connecting Link

013209508
4075586-01: RNCC: 3 | RNVC: 2
3040PL0668966: RNCC: 6 | RNVC: 9

6 Jun 1990

3040-01-321-8321
Shouldered Shaft

013218321
12553403: RNCC: 3 | RNVC: 2

23 Jun 1990

3040-01-322-5261
Shouldered Shaft

013225261
789770-2: RNCC: 3 | RNVC: 2

9 Jul 1990

3040-01-322-5784
Manual Control Lever

013225784
7N9942: RNCC: 3 | RNVC: 2

10 Jul 1990

3040-01-322-6307
Control Cam

013226307
3034-348: RNCC: 3 | RNVC: 2

11 Jul 1990

3040-01-322-9694
Rigid Connecting Link

013229694
12553397-2: RNCC: 3 | RNVC: 2

17 Jul 1990

3040-01-323-3261
Shouldered Shaft

013233261
23505896: RNCC: 3 | RNVC: 2
DDE 23505896: RNCC: 5 | RNVC: 2

26 Jul 1990

3040-01-323-5211
Rigid Connecting Link

013235211
12553637: RNCC: 3 | RNVC: 2

28 Jul 1990

3040-01-323-9129
Counterbalance Weight

013239129
1522M76P03: RNCC: 3 | RNVC: 2
15522M76P03: RNCC: E | RNVC: 8
9528M59P02: RNCC: E | RNVC: 8

5 Aug 1990

3040-01-324-0752
Rigid Connecting Link

013240752
3342820-1: RNCC: 3 | RNVC: 2
3314875-1: RNCC: 5 | RNVC: 9
3040PL1014834: RNCC: 6 | RNVC: 9

9 Aug 1990

3040-01-323-5210
Body Hub

013235210
12553274: RNCC: 3 | RNVC: 2

28 Jul 1990

3040-01-325-2143
Control Cam

013252143
3037-683: RNCC: 3 | RNVC: 2

30 Aug 1990

3040-01-324-9400
Nonrotating Shaft Eye Bracket

013249400
SW28835: RNCC: 3 | RNVC: 2

25 Aug 1990

3040-01-325-2162
Linear Actuating Cylinder Assembly

013252162
2198032-2: RNCC: 3 | RNVC: 2
2198032-2: RNCC: 5 | RNVC: 1
2198032-2: RNCC: 5 | RNVC: 9

30 Aug 1990

3040-01-325-4078
Straight Shaft

013254078
7002596-2: RNCC: 3 | RNVC: 2
7002596-2: RNCC: 3 | RNVC: 9
10107026: RNCC: 6 | RNVC: 9

4 Sep 1990

3040-01-326-3188
Rigid Connecting Link

013263188
430075 ITEM 13: RNCC: 3 | RNVC: 2
227200: RNCC: C | RNVC: 1

21 Sep 1990

3040-01-326-9121
Shouldered Shaft

013269121
21607: RNCC: 3 | RNVC: 2

3 Oct 1990

3040-01-327-0486
Push-Pull Control Assembly

013270486
FLD/65112 60: RNCC: 3 | RNVC: 2
65112-60: RNCC: 5 | RNVC: 2
ARL65112-60: RNCC: 5 | RNVC: 2
65112-60: RNCC: 5 | RNVC: 9

5 Oct 1990

3040-01-327-0532
Spline Adapter

013270532
2165901: RNCC: 3 | RNVC: 2
2165901: RNCC: 5 | RNVC: 1

5 Oct 1990

3040-01-327-5253
Straight Shaft

013275253
12353606-1: RNCC: 3 | RNVC: 2
12353606: RNCC: D | RNVC: 9

16 Oct 1990

3040-01-327-9444
Manual Control Lever

013279444
12347348: RNCC: 3 | RNVC: 2

25 Oct 1990

3040-01-328-2884
Shouldered Shaft

013282884
2227050-11: RNCC: 3 | RNVC: 2
2227050-11: RNCC: 5 | RNVC: 1
2227050-11: RNCC: 5 | RNVC: 9
2227050: RNCC: D | RNVC: 9

30 Oct 1990

3040-01-328-6441
Control Cam

013286441
3152711: RNCC: 3 | RNVC: 2
3152711: RNCC: 5 | RNVC: 2
350591: RNCC: 5 | RNVC: 9
350591: RNCC: 5 | RNVC: 9
3152711: RNCC: 5 | RNVC: 9

6 Nov 1990

3040-01-329-2467
Straight Shaft

013292467
123AMM42126-1: RNCC: 3 | RNVC: 2
123AMM42126-1: RNCC: 5 | RNVC: 2
123AMM42126-1: RNCC: 5 | RNVC: 9
123AMM42126: RNCC: D | RNVC: 9

13 Nov 1990

3040-01-332-0072
Linear Actuating Cylinder Assembly Parts Kit

013320072
RE20433: RNCC: 3 | RNVC: 2
RE20433: RNCC: 5 | RNVC: 2
RE20433: RNCC: 5 | RNVC: 9

31 Dec 1990

3040-01-333-5932
Bevel Gearshaft

013335932
214-040-047-103: RNCC: 3 | RNVC: 2
214-040-047: RNCC: D | RNVC: 9

6 Feb 1991

3040-01-333-5939
Rigid Connecting Link

013335939
58810: RNCC: 3 | RNVC: 2

6 Feb 1991

3040-01-337-2053
Shaft Collar

013372053
509041: RNCC: 3 | RNVC: 2
509041: RNCC: 5 | RNVC: 9

11 Apr 1991

3040-01-337-5202
Worm Wheel Gearshaft

013375202
01-435-0405-4 ITEM 17: RNCC: 3 | RNVC: 2
60-420-0149-1: RNCC: 5 | RNVC: 2
01-435-0405-4: RNCC: D | RNVC: 9

16 Apr 1991

3040-01-338-2371
Linear Actuating Cylinder Piston Rod

013382371
C561664: RNCC: 3 | RNVC: 2
1324920: RNCC: 5 | RNVC: 2
1324920: RNCC: 5 | RNVC: 9

28 Apr 1991

3040-01-338-2546
Remote Control Lever

013382546
3912635: RNCC: 3 | RNVC: 2
1 422 002 216: RNCC: 3 | RNVC: 2
2912635: RNCC: 5 | RNVC: 9

28 Apr 1991

3040-01-338-3011
Multiple Gears Gearshaft

013383011
203713: RNCC: 3 | RNVC: 2

30 Apr 1991

3040-01-338-3937
Shouldered Shaft

013383937
3505607 PC 23: RNCC: 3 | RNVC: 2
3502479-7: RNCC: 5 | RNVC: 2
3505607: RNCC: D | RNVC: 9

3 May 1991

3040-01-338-6278
Shouldered Shaft

013386278
114R3053-10: RNCC: 3 | RNVC: 2

8 May 1991

3040-01-339-9242
Counterbalance Weight

013399242
4070419CL1: RNCC: 3 | RNVC: 2
4070419CL1: RNCC: 5 | RNVC: 2

4 Jun 1991

3040-01-340-1466
Brake Disc

013401466
15222003-003: RNCC: 3 | RNVC: 2
15222003-003: RNCC: 5 | RNVC: 9
15222003-005: RNCC: 5 | RNVC: 9
15222003-003: RNCC: 5 | RNVC: 9

10 Jun 1991

3040-01-340-5916
Shouldered Shaft

013405916
9356135: RNCC: 3 | RNVC: 2

17 Jun 1991

3040-01-340-9828
Control Cam

013409828
150-300-100-792-000: RNCC: 3 | RNVC: 2

23 Jun 1991

3040-01-341-0138
Counterbalance Weight

013410138
2301004: RNCC: 3 | RNVC: 2
AS44520-040: RNCC: 5 | RNVC: 2
AS44520-040: RNCC: 5 | RNVC: 9
AS44520-040: RNCC: 5 | RNVC: 9
AS44520 THRU 23: RNCC: 5 | RNVC: 9
AS44520-040: RNCC: 5 | RNVC: 9
AS44520-040: RNCC: 5 | RNVC: 9

23 Jun 1991

3040-01-340-7102
Counterbalance Weight

013407102
2301000: RNCC: 3 | RNVC: 2
AS44520-005: RNCC: 5 | RNVC: 2
AS44520-005: RNCC: 5 | RNVC: 9
AS44520-005: RNCC: 5 | RNVC: 9
AS44520-005: RNCC: 5 | RNVC: 9
AS44520-005: RNCC: 5 | RNVC: 9

19 Jun 1991

3040-01-341-7598
Straight Shaft

013417598
6197553: RNCC: 3 | RNVC: 2
6197530 PART 17: RNCC: 5 | RNVC: 2
6197530: RNCC: D | RNVC: 9

7 Jul 1991

3040-01-342-2915
Piston Ring Set

013422915
43537: RNCC: 3 | RNVC: 2

18 Jul 1991

3040-01-343-0704
Control Cam

013430704
3035-450: RNCC: 3 | RNVC: 2
3035-450: RNCC: 5 | RNVC: 2
3035-450: RNCC: 5 | RNVC: 2

4 Aug 1991

3040-01-343-3659
Linear Actuating Cylinder Assembly Parts Kit

013433659
L045610000: RNCC: 3 | RNVC: 2

12 Aug 1991

3040-01-343-3425
Remote Control Lever

013433425
12592621: RNCC: 3 | RNVC: 2

10 Aug 1991

3040-01-343-6749
Receiver-Transmitter Subassembly

013436749
10065549-101: RNCC: 3 | RNVC: 2
10065549-101: RNCC: 3 | RNVC: 2

15 Aug 1991

3040-01-344-5770
Counterbalance Weight

013445770
335-014-407-0: RNCC: 3 | RNVC: 2

31 Aug 1991

3040-01-345-0787
Helical Gearshaft

013450787
1888550 U: RNCC: 3 | RNVC: 2
1888550 U: RNCC: 5 | RNVC: 9

11 Sep 1991

3040-01-345-8385
Straight Shaft

013458385
45102: RNCC: 3 | RNVC: 9
45102: RNCC: C | RNVC: 1

24 Sep 1991

3040-01-346-0098
Flexible Shaft Assembly Casing

013460098
2600207-107: RNCC: 3 | RNVC: 2

25 Sep 1991

3040-01-346-0730
Worm Shaft

013460730
906010PL FIND 6 A10: RNCC: 3 | RNVC: 9
810210A10: RNCC: 5 | RNVC: 9
810210PL ASSY 810210-10: RNCC: 5 | RNVC: 9
810210PL ASSY 810210-10: RNCC: C | RNVC: 1
810210A10: RNCC: C | RNVC: 1
906010PL FIND 6 A10: RNCC: C | RNVC: 1
906010: RNCC: D | RNVC: 9

26 Sep 1991

3040-01-352-2416
Rigid Connecting Link

013522416
B511624: RNCC: 3 | RNVC: 9
B511624: RNCC: 5 | RNVC: 2
B511624: RNCC: 5 | RNVC: 9

23 Jan 1992

3040-01-352-1915
Shoe Type Brake

013521915
6607521 ITEM 3: RNCC: 3 | RNVC: 2

22 Jan 1992

3040-01-353-7636
Nonrotating Shaft Eye Bracket

013537636
12370804: RNCC: 3 | RNVC: 2
12370804: RNCC: 5 | RNVC: 2
12370804: RNCC: 5 | RNVC: 2
12370804: RNCC: 5 | RNVC: 9
12370804: RNCC: 5 | RNVC: 9

15 Feb 1992

3040-01-356-1683
Shaft Retaining Plate

013561683
520245-1: RNCC: 3 | RNVC: 2

30 Mar 1992

3040-01-356-8670
Straight Shaft

013568670
3117-3488-010: RNCC: 3 | RNVC: 2
PL 3117-3495-000 SEQ 3: RNCC: 5 | RNVC: 2
3117-3488-010: RNCC: 5 | RNVC: 9
PL 3117-3495-000 SEQ 3: RNCC: 5 | RNVC: 9
3117-3488-010: RNCC: C | RNVC: 1
PL 3117-3495-000 SEQ 3: RNCC: C | RNVC: 1

12 Apr 1992

3040-01-358-6143
Straight Shaft

013586143
5122105-017-3: RNCC: 3 | RNVC: 2

16 May 1992

3040-01-358-8709
Rigid Connecting Link

013588709
ALBK04-1001: RNCC: 3 | RNVC: 2
4D0100-1: RNCC: 5 | RNVC: 2
LREP4-2: RNCC: 5 | RNVC: 9
ALBK04-1001P: RNCC: C | RNVC: 1
4D0100: RNCC: D | RNVC: 9

22 May 1992

3040-01-359-2462
Shouldered Shaft

013592462
3-M-1: RNCC: 3 | RNVC: 2
3040PL0838198: RNCC: 6 | RNVC: 9

1 Jun 1992

3040-01-359-2463
Shouldered Shaft

013592463
SW34181: RNCC: 3 | RNVC: 2
SW32709: RNCC: 5 | RNVC: 9

1 Jun 1992

3040-01-360-2404
Shouldered Shaft

013602404
5267929: RNCC: 3 | RNVC: 2

20 Jun 1992

3040-01-360-5990
Linear Actuating Cylinder Assembly Parts Kit

013605990
855017P0802: RNCC: 3 | RNVC: 2
2657304826: RNCC: 5 | RNVC: 2

28 Jun 1992

3040-01-360-6350
Mechanical Drive Housing

013606350
29507833: RNCC: 3 | RNVC: 2
29507833: RNCC: 5 | RNVC: 2
29507833: RNCC: 5 | RNVC: 2
29507833: RNCC: 5 | RNVC: 9
29507833: RNCC: C | RNVC: 1

28 Jun 1992

3040-01-361-0570
Straight Shaft

013610570
29507838: RNCC: 3 | RNVC: 2
29507838: RNCC: 5 | RNVC: 2
29507838: RNCC: 5 | RNVC: 2

8 Jul 1992

3040-01-361-0615
Mechanical Drive Housing

013610615
7E6366: RNCC: 3 | RNVC: 2
7E6366: RNCC: 5 | RNVC: 9
3040013610615: RNCC: 6 | RNVC: 9

8 Jul 1992

3040-01-362-3486
Piston Ring Set

013623486
S32152-338-99 PH: RNCC: 3 | RNVC: 2
A78093-338PH-99: RNCC: 5 | RNVC: 2
S32152-338-99 PH: RNCC: 5 | RNVC: 9
S32152: RNCC: D | RNVC: 9
A78093: RNCC: D | RNVC: 9

5 Aug 1992

3040-01-363-2334
Shouldered Shaft

013632334
3862939-1: RNCC: 3 | RNVC: 2
3862939: RNCC: D | RNVC: 9

27 Aug 1992

3040-01-363-2768
Remote Control Lever

013632768
4477-054: RNCC: 3 | RNVC: 2

27 Aug 1992

3040-01-365-3026
Multiple Disk Brake

013653026
56P45-07: RNCC: 3 | RNVC: 2
2B8-05411: RNCC: 5 | RNVC: 2
2D3-03458: RNCC: 5 | RNVC: 9

5 Oct 1992

3040-01-365-7929
Shouldered Shaft

013657929
MBEU145897: RNCC: 3 | RNVC: 2
MBEU145897: RNCC: 5 | RNVC: 2

14 Oct 1992

3040-01-365-7031
Brake Band And Lining

013657031
5D1-03044: RNCC: 3 | RNVC: 2

11 Oct 1992

3040-01-365-9172
Hydraulic Accumulator Bladder

013659172
E703001: RNCC: 3 | RNVC: 2
700405: RNCC: 5 | RNVC: 9
703001: RNCC: 5 | RNVC: 9

19 Oct 1992

3040-01-366-3966
Control Cam

013663966
5009291: RNCC: 3 | RNVC: 2

24 Oct 1992

3040-01-366-5295
Manual Control Lever

013665295
715166-A00: RNCC: 3 | RNVC: 2
715166-A: RNCC: 5 | RNVC: 9

28 Oct 1992

3040-01-366-7224
Shouldered Shaft

013667224
514296: RNCC: 3 | RNVC: 2

1 Nov 1992

3040-01-367-4676
Push-Pull Control Assembly

013674676
VE-527-WAP: RNCC: 3 | RNVC: 2

13 Nov 1992

3040-01-368-0085
Linear Actuating Cylinder Assembly

013680085
SW24723: RNCC: 3 | RNVC: 2
8803-023: RNCC: 5 | RNVC: 9
SW24723: RNCC: 5 | RNVC: 9

23 Nov 1992

3040-01-368-7598
Straight Shaft

013687598
30528-1: RNCC: 3 | RNVC: 2

8 Dec 1992

3040-01-369-3578
Remote Control Lever

013693578
12384658: RNCC: 3 | RNVC: 2

22 Dec 1992

3040-01-369-3576
Bell Crank

013693576
12384659-1: RNCC: 3 | RNVC: 2

22 Dec 1992

3040-01-369-9324
Remote Control Lever

013699324
1-422-013-091: RNCC: 3 | RNVC: 2

8 Jan 1993

3040-01-370-0221
Linear Actuating Cylinder Head

013700221
6-372-003478: RNCC: 3 | RNVC: 2
6-372-003478: RNCC: 5 | RNVC: 2
6-372-003478: RNCC: 5 | RNVC: 2
6-372-003478: RNCC: 5 | RNVC: 9

11 Jan 1993

3040-01-370-0218
Linear Actuating Cylinder Piston

013700218
6-701-000953: RNCC: 3 | RNVC: 9
6-701-000953: RNCC: 5 | RNVC: 2
6-701-000953: RNCC: 5 | RNVC: 2
6-701-000953: RNCC: 5 | RNVC: 2
6-701-000953: RNCC: 5 | RNVC: 9

11 Jan 1993

3040-01-370-1392
Linear Actuating Cylinder Piston

013701392
6-701-000955: RNCC: 3 | RNVC: 2
6-701-000955: RNCC: 5 | RNVC: 2
6-701-000955: RNCC: 5 | RNVC: 2

14 Jan 1993

3040-01-316-0565
Counterbalance Weight

013160565
3755-5: RNCC: 3 | RNVC: 2
3755-5: RNCC: 5 | RNVC: 2
3040PL0928064: RNCC: 6 | RNVC: 9

2 Mar 1990

3040-01-316-3091
Limit Assembly Gear

013163091
83763: RNCC: 3 | RNVC: 2
83687 ITEM 24: RNCC: C | RNVC: 1

8 Mar 1990

3040-01-316-6987
Body Hub

013166987
12361748: RNCC: 3 | RNVC: 2

13 Mar 1990

3040-01-316-4172
Shouldered Shaft

013164172
3332994-1: RNCC: 3 | RNVC: 9
3332994-1: RNCC: 5 | RNVC: 2
3332994-1: RNCC: 5 | RNVC: 2
3332994-1: RNCC: 5 | RNVC: 2
3332994-1: RNCC: 5 | RNVC: 2
3332994-1: RNCC: 5 | RNVC: 2
3332994-1: RNCC: 5 | RNVC: 9
3332994-1: RNCC: C | RNVC: 1

8 Mar 1990

3040-01-316-7741
Brake Shoe

013167741
510959: RNCC: 3 | RNVC: 2

16 Mar 1990

3040-01-317-0272
Rigid Connecting Link

013170272
4073157: RNCC: 3 | RNVC: 2

21 Mar 1990

3040-01-317-2779
Straight Shaft

013172779
JCM-14682-001: RNCC: 3 | RNVC: 2
JCM-14682: RNCC: D | RNVC: 9

27 Mar 1990

3040-01-317-5365
Control Cam

013175365
3037-641: RNCC: 3 | RNVC: 2
X83470-151: RNCC: 5 | RNVC: 2

31 Mar 1990

3040-01-319-1487
Counterbalance Weight

013191487
4071747: RNCC: 3 | RNVC: 2

2 May 1990

3040-01-319-7495
Straight Shaft

013197495
700079: RNCC: 3 | RNVC: 2

13 May 1990

3040-01-321-4490
Shouldered Shaft

013214490
B65889-01: RNCC: 3 | RNVC: 2
PL-30451-01 ITEM 5: RNCC: 5 | RNVC: 2
65889-01: RNCC: C | RNVC: 1
65889: RNCC: D | RNVC: 9

19 Jun 1990

3040-01-321-4672
Remote Control Lever

013214672
20428-440: RNCC: 3 | RNVC: 2
20428-002 FIND 3: RNCC: 5 | RNVC: 9
20428-002: RNCC: D | RNVC: 9

19 Jun 1990

3040-01-321-8337
Shouldered Shaft Assembly

013218337
5544106: RNCC: 3 | RNVC: 2
5544106: RNCC: 5 | RNVC: 2

23 Jun 1990

3040-01-322-9693
Rigid Connecting Link

013229693
12553397-1: RNCC: 3 | RNVC: 2

17 Jul 1990

3040-01-322-9999
Bell Crank

013229999
1286M29G01: RNCC: 3 | RNVC: 2
1286M29G02: RNCC: 5 | RNVC: 2

18 Jul 1990

3040-01-323-8663
Straight Shaft

013238663
3825156-1: RNCC: 3 | RNVC: 2
382156-1: RNCC: 5 | RNVC: 1
3825156-1: RNCC: 5 | RNVC: 2
3825156-1: RNCC: 5 | RNVC: 9
10107022: RNCC: 6 | RNVC: 9
3825156-1: RNCC: C | RNVC: 1
3825156: RNCC: D | RNVC: 9
3825156-10019: RNCC: D | RNVC: 9

5 Aug 1990

3040-01-324-0887
Mechanical Drive Housing

013240887
GRD24606: RNCC: 3 | RNVC: 2
GRD24606: RNCC: 5 | RNVC: 2
GRD24606: RNCC: 5 | RNVC: 9
GRD24606: RNCC: 5 | RNVC: 9
GRD24606: RNCC: C | RNVC: 1

10 Aug 1990

3040-01-324-9190
Shouldered Shaft

013249190
12553402: RNCC: 3 | RNVC: 2

24 Aug 1990

3040-01-325-6339
Rigid Connecting Link

013256339
4F23660-139A: RNCC: 3 | RNVC: 2

7 Sep 1990

3040-01-325-6348
Rigid Connecting Link

013256348
4C63130-101C: RNCC: 3 | RNVC: 2

7 Sep 1990

3040-01-325-8079
Spur Gearshaft

013258079
749418: RNCC: 3 | RNVC: 2

11 Sep 1990

3040-01-326-3107
Mechanical Drive Housing

013263107
4258-042: RNCC: 3 | RNVC: 2

21 Sep 1990

3040-01-327-5006
Control Cam

013275006
2676471: RNCC: 3 | RNVC: 2

16 Oct 1990

3040-01-327-6001
Control Cam

013276001
2676014: RNCC: 3 | RNVC: 2

17 Oct 1990

3040-01-328-0653
Rigid Connecting Link

013280653
12361444: RNCC: 3 | RNVC: 2
12361444: RNCC: 5 | RNVC: 2
12361444: RNCC: 5 | RNVC: 2
12361444: RNCC: 5 | RNVC: 2

26 Oct 1990

3040-01-329-0968
Brake Shoe

013290968
330010: RNCC: 3 | RNVC: 2
001505T: RNCC: 5 | RNVC: 2
330010: RNCC: C | RNVC: 1
120556: RNCC: D | RNVC: 9

11 Nov 1990

3040-01-329-1471
Bevel Gearshaft

013291471
C-12173-2: RNCC: 3 | RNVC: 2
C-12173-2: RNCC: 5 | RNVC: 9

11 Nov 1990

3040-01-330-4978
Straight Shaft

013304978
AE84831R ITEM 8: RNCC: 3 | RNVC: 2
AE18762-002: RNCC: 5 | RNVC: 2

4 Dec 1990

3040-01-330-8262
Body Hub

013308262
20-X-1815: RNCC: 3 | RNVC: 2
20-X-1815: RNCC: 5 | RNVC: 2
3040013308262: RNCC: 6 | RNVC: 9
4-60119BA-S: RNCC: D | RNVC: 9

9 Dec 1990

3040-01-330-7951
Remote Control Lever

013307951
4F14229-103A: RNCC: 3 | RNVC: 2
4F14229-103A: RNCC: 5 | RNVC: 9

8 Dec 1990

3040-01-331-4872
Control Cam

013314872
3825070-1: RNCC: 3 | RNVC: 2
3825070-1: RNCC: 5 | RNVC: 2
3825070-1: RNCC: 5 | RNVC: 9
10107029: RNCC: 6 | RNVC: 9

20 Dec 1990

3040-01-332-1669
Rigid Connecting Link

013321669
495-300220-1: RNCC: 3 | RNVC: 2
495-300220-1: RNCC: 5 | RNVC: 9
495-300220-1: RNCC: 5 | RNVC: 9
495-300220-1: RNCC: 5 | RNVC: 9
495-300220: RNCC: D | RNVC: 9

5 Jan 1991

3040-01-332-5830
Shouldered Shaft

013325830
4079-41133-01: RNCC: 3 | RNVC: 2
4079-41133-01: RNCC: 5 | RNVC: 2
4079-41133-01: RNCC: 5 | RNVC: 2

12 Jan 1991

3040-01-335-4244
Shouldered Shaft

013354244
9778CU: RNCC: 3 | RNVC: 2

8 Mar 1991

3040-01-336-5609
Rigid Connecting Link

013365609
12351511: RNCC: 3 | RNVC: 2
12351511: RNCC: 5 | RNVC: 9

27 Mar 1991

3040-01-336-8217
Linear Actuating Cylinder Piston

013368217
23017260: RNCC: 3 | RNVC: 2

3 Apr 1991

3040-01-337-7384
Linear Actuating Cylinder Piston Rod

013377384
289967: RNCC: 3 | RNVC: 2
289967: RNCC: 5 | RNVC: 9

21 Apr 1991

3040-01-337-7572
Rigid Connecting Link

013377572
75A326692-1001: RNCC: 3 | RNVC: 2
75A326692-1001: RNCC: 5 | RNVC: 2
75A326692-1001: RNCC: 5 | RNVC: 9
75A326692-1001: RNCC: 5 | RNVC: 9

21 Apr 1991

3040-01-338-2560
Flexible Drive Shaft

013382560
A22-39656-146: RNCC: 3 | RNVC: 2
A22-33040-046: RNCC: 5 | RNVC: 9
A22-33040: RNCC: D | RNVC: 9

28 Apr 1991

3040-01-338-7521
Shouldered Shaft

013387521
1693480: RNCC: 3 | RNVC: 2
1693480: RNCC: 5 | RNVC: 9

10 May 1991

3040-01-339-0419
Shouldered Shaft

013390419
742407: RNCC: 3 | RNVC: 2

15 May 1991

3040-01-339-3513
Shouldered Shaft

013393513
742440 S: RNCC: 3 | RNVC: 2
742440: RNCC: 5 | RNVC: 9

21 May 1991

3040-01-339-3546
Pivot Shaft Assembly

013393546
6532B113-1: RNCC: 3 | RNVC: 2
6532B113: RNCC: D | RNVC: 9

21 May 1991

3040-01-339-6818
Linear Actuating Cylinder Piston Rod

013396818
704-6294478-4: RNCC: 3 | RNVC: 2
704-6294478-4: RNCC: 3 | RNVC: 2
704-6294478: RNCC: D | RNVC: 9

28 May 1991

3040-01-340-0213
Bevel Gearshaft

013400213
2677651: RNCC: 3 | RNVC: 2
2677651: RNCC: 5 | RNVC: 2
2677651: RNCC: 5 | RNVC: 9

6 Jun 1991

3040-01-341-8614
Control Cam

013418614
6546C027-1: RNCC: 3 | RNVC: 2
6546C027-1: RNCC: 5 | RNVC: 2
6546C027: RNCC: 5 | RNVC: 2

10 Jul 1991

3040-01-341-8630
Linear Actuating Cylinder Assembly

013418630
19009A0620: RNCC: 3 | RNVC: 2
82A5052A0569: RNCC: 5 | RNVC: 9

10 Jul 1991

3040-01-342-6801
Shaft Collar

013426801
12591450: RNCC: 3 | RNVC: 2

29 Jul 1991

3040-01-342-8967
Rigid Connecting Link

013428967
A02R2853-2: RNCC: 3 | RNVC: 2

1 Aug 1991

3040-01-342-0623
Shouldered Shaft

013420623
6547B044-1: RNCC: 3 | RNVC: 2
6547B044: RNCC: D | RNVC: 9

14 Jul 1991

3040-01-343-3307
Shaft Collar

013433307
17090-1: RNCC: 3 | RNVC: 2

10 Aug 1991

3040-01-343-2608
Shouldered Shaft

013432608
541-1101-04: RNCC: 3 | RNVC: 2
10107276: RNCC: 6 | RNVC: 9

9 Aug 1991

3040-01-344-2728
Gear Plate Assembly

013442728
NYLC1451: RNCC: 3 | RNVC: 2

27 Aug 1991

3040-01-344-2827
V Casing Assy Pallet Latch Control

013442827
2600206-101: RNCC: 3 | RNVC: 2

27 Aug 1991

3040-01-344-9343
Control Cam

013449343
12592628: RNCC: 3 | RNVC: 2

8 Sep 1991

3040-01-345-0548
Shaft Retaining Plate

013450548
12347351: RNCC: 3 | RNVC: 2
12347351: RNCC: 5 | RNVC: 2

11 Sep 1991

3040-01-345-6744
Shouldered Shaft

013456744
108866: RNCC: 3 | RNVC: 2
10107259: RNCC: 6 | RNVC: 9

23 Sep 1991

3040-01-346-5390
Rigid Connecting Link

013465390
101276-1: RNCC: 3 | RNVC: 2

8 Oct 1991

3040-01-348-1594
Linear Actuating Cylinder Assembly

013481594
16619C: RNCC: 3 | RNVC: 2
A-8691: RNCC: 5 | RNVC: 9

5 Nov 1991

3040-01-348-3902
Control Cam

013483902
406-071-110-103: RNCC: 3 | RNVC: 2
406-071-110-103: RNCC: 5 | RNVC: 2
406-071-110: RNCC: D | RNVC: 9

8 Nov 1991

3040-01-348-5878
Shouldered Shaft

013485878
A3156843-001: RNCC: 3 | RNVC: 2
A3156843-001: RNCC: 5 | RNVC: 2

13 Nov 1991

3040-01-349-8696
Rigid Connecting Link

013498696
5058T65P01: RNCC: 3 | RNVC: 2
178293-X: RNCC: 5 | RNVC: 2
HTLK4-4: RNCC: 5 | RNVC: 2
10159295: RNCC: 6 | RNVC: 9
5058T65: RNCC: D | RNVC: 9
5058T27G01: RNCC: E | RNVC: 8

5 Dec 1991

3040-01-351-4532
Pawl

013514532
A3131372: RNCC: 3 | RNVC: 2
A3131372: RNCC: 5 | RNVC: 9
A3131372: RNCC: 5 | RNVC: 9

9 Jan 1992

3040-01-352-7020
Shaft Idler

013527020
748720: RNCC: 3 | RNVC: 2

30 Jan 1992

3040-01-353-8552
Spur Gearshaft

013538552
40A2019: RNCC: 3 | RNVC: 2

19 Feb 1992

3040-01-354-6210
Shaft Retaining Plate

013546210
520248-1: RNCC: 3 | RNVC: 2

2 Mar 1992

3040-01-354-5567
Rigid Connecting Link

013545567
1728070: RNCC: 3 | RNVC: 2
ML11-22.31: RNCC: 5 | RNVC: 2
L1/3B4/3/22.31: RNCC: 5 | RNVC: 9
1728070: RNCC: 5 | RNVC: 9

29 Feb 1992

3040-01-354-9152
Linear Actuating Cylinder Piston

013549152
6-701-000396: RNCC: 3 | RNVC: 2
2HE912: RNCC: C | RNVC: 1

7 Mar 1992

3040-01-355-7658
Straight Shaft

013557658
12553267: RNCC: 3 | RNVC: 2

23 Mar 1992

3040-01-356-0813
Shouldered Shaft

013560813
42305-526: RNCC: 3 | RNVC: 2
42305-526: RNCC: 5 | RNVC: 2
42305-526: RNCC: 5 | RNVC: 9
42305E526: RNCC: 5 | RNVC: 9
42305-526: RNCC: 5 | RNVC: 9
42305E526: RNCC: 5 | RNVC: 9

28 Mar 1992

3040-01-357-0547
Control Cam

013570547
12553527: RNCC: 3 | RNVC: 2

16 Apr 1992

3040-01-356-8739
Rigid Connecting Link

013568739
4078355: RNCC: 3 | RNVC: 2
4078355: RNCC: 5 | RNVC: 2
3040PL0669164: RNCC: 6 | RNVC: 9

12 Apr 1992

3040-01-357-5676
Straight Shaft

013575676
21371-4: RNCC: 3 | RNVC: 2
21371-4: RNCC: 5 | RNVC: 2
2GK305: RNCC: 5 | RNVC: 2
21371-4: RNCC: 5 | RNVC: 2
2GK305: RNCC: 5 | RNVC: 9

26 Apr 1992

3040-01-357-5724
Push-Pull Control Assembly

013575724
CCX63304: RNCC: 3 | RNVC: 2
32377-003-4FT: RNCC: 5 | RNVC: 9
32377-003-48IN.: RNCC: 5 | RNVC: 9
87-65870-003-48: RNCC: 5 | RNVC: 9
32377-003-4FT: RNCC: 5 | RNVC: 9
32377-003-48IN.: RNCC: 5 | RNVC: 9

26 Apr 1992

3040-01-357-5849
Straight Shaft

013575849
53X-01-153: RNCC: 3 | RNVC: 9
53X-01-153: RNCC: 5 | RNVC: 9
53X-01-153: RNCC: C | RNVC: 1

27 Apr 1992

3040-01-357-8786
Spur Gearshaft

013578786
126-53026-3: RNCC: 3 | RNVC: 2
126-53026: RNCC: D | RNVC: 9

3 May 1992

3040-01-359-1117
Mechanical Drive Housing

013591117
16550: RNCC: 3 | RNVC: 2
16550: RNCC: 5 | RNVC: 2
5938618: RNCC: 5 | RNVC: 2
5938618: RNCC: 5 | RNVC: 9

29 May 1992

3040-01-358-7034
Helical Gearshaft

013587034
12342602: RNCC: 3 | RNVC: 2
3040013587034: RNCC: 5 | RNVC: 9
3040PL0841747: RNCC: 6 | RNVC: 9
3040013587034: RNCC: 6 | RNVC: 9
12342602: RNCC: D | RNVC: 9

18 May 1992

3040-01-358-8692
Multiple Gears Gearshaft

013588692
17565: RNCC: 3 | RNVC: 2
5938639: RNCC: 5 | RNVC: 2

22 May 1992

3040-01-359-2464
Shouldered Shaft

013592464
8909-371-001: RNCC: 3 | RNVC: 2
8909-371-001: RNCC: 5 | RNVC: 9

1 Jun 1992

3040-01-358-7048
Cylinder Support

013587048
4W6960: RNCC: 3 | RNVC: 2

18 May 1992

3040-01-360-6284
Shouldered Shaft

013606284
29506077: RNCC: 3 | RNVC: 2
29506077: RNCC: 5 | RNVC: 2
29506077: RNCC: 5 | RNVC: 2

28 Jun 1992

3040-01-362-5689
Shouldered Shaft

013625689
50212010-9: RNCC: 3 | RNVC: 2
50212010-9: RNCC: 5 | RNVC: 9
50212010-9: RNCC: 5 | RNVC: 9
50212010-9: RNCC: 5 | RNVC: 9
50212010 ITEM 9: RNCC: 5 | RNVC: 9

9 Aug 1992

3040-01-363-2360
Counterbalance Weight

013632360
5157400720: RNCC: 3 | RNVC: 9
5157400720: RNCC: 5 | RNVC: 2
5157400720: RNCC: 5 | RNVC: 9

27 Aug 1992

3040-01-363-4334
Shouldered Shaft

013634334
3881133-2: RNCC: 3 | RNVC: 2

29 Aug 1992

3040-01-362-3530
Linear Actuating Cylinder Assembly

013623530
3261Q1057: RNCC: 3 | RNVC: 2
3261Q1057: RNCC: 5 | RNVC: 2
3261Q1057: RNCC: 5 | RNVC: 2
3261Q1057: RNCC: 5 | RNVC: 9

5 Aug 1992

3040-01-361-0755
Body Hub

013610755
29530448: RNCC: 3 | RNVC: 2
22KP754: RNCC: 5 | RNVC: 1
29530448: RNCC: 5 | RNVC: 2
29530448: RNCC: 5 | RNVC: 2
29500950: RNCC: 5 | RNVC: 9
29516169: RNCC: 5 | RNVC: 9

8 Jul 1992

3040-01-363-8783
Adjusting Cap Assembly

013638783
20243: RNCC: 3 | RNVC: 2

8 Sep 1992

3040-01-364-4607
Rigid Connecting Link

013644607
L6317371-001: RNCC: 3 | RNVC: 2
L6317371: RNCC: D | RNVC: 9

19 Sep 1992

3040-01-365-2577
Shouldered Shaft

013652577
MBEU142171: RNCC: 3 | RNVC: 2
MBEU142171: RNCC: 5 | RNVC: 2
MBEU14217: RNCC: 5 | RNVC: 2
MBEU142171: RNCC: 5 | RNVC: 2
10107281: RNCC: 6 | RNVC: 9

4 Oct 1992

3040-01-364-9832
Brake Bolt Assembly

013649832
2179-1031-000: RNCC: 3 | RNVC: 2
2179-1031-000: RNCC: 5 | RNVC: 9
PL2179-1100-100 SEQ13: RNCC: 5 | RNVC: 9
PL2179-1100-100 SEQ13: RNCC: C | RNVC: 1

28 Sep 1992

3040-01-365-2923
Friction Lining

013652923
H007A0022-00: RNCC: 3 | RNVC: 9
H007A0022-00: RNCC: 5 | RNVC: 2
H007A0001-00 ITEM 15: RNCC: 5 | RNVC: 9
H007A0022-00: RNCC: 5 | RNVC: 9
H007A0001-00: RNCC: D | RNVC: 9

5 Oct 1992

3040-01-365-2974
Manual Control Lever

013652974
803-5959218PC11: RNCC: 3 | RNVC: 2
DN10031: RNCC: 5 | RNVC: 2
803-5959218: RNCC: D | RNVC: 9

5 Oct 1992

3040-01-365-9295
Pawl

013659295
MBEU146400: RNCC: 3 | RNVC: 2
MBEU146400: RNCC: 5 | RNVC: 2
MBEU146400: RNCC: 5 | RNVC: 9

19 Oct 1992

3040-01-366-3831
Shouldered Shaft

013663831
MBEU145906: RNCC: 3 | RNVC: 2
MBEU145906: RNCC: 5 | RNVC: 2
10107286: RNCC: 6 | RNVC: 9

24 Oct 1992

3040-01-369-0594
Hydraulic Accumulator

013690594
BA02B3T01P2: RNCC: 3 | RNVC: 2
H615B001 ITEM 39: RNCC: 5 | RNVC: 2
849760: RNCC: 5 | RNVC: 9
BA02B3T01A1: RNCC: 5 | RNVC: 9

13 Dec 1992

3040-01-369-3579
Remote Control Lever

013693579
12384657: RNCC: 3 | RNVC: 2

22 Dec 1992

3040-01-370-1347
Straight Shaft

013701347
6-810-002184: RNCC: 3 | RNVC: 2
6-810-002184: RNCC: 5 | RNVC: 2
6-810-002184: RNCC: 5 | RNVC: 2

14 Jan 1993

3040-01-370-2553
Linear Actuating Cylinder Piston Rod

013702553
12938327: RNCC: 3 | RNVC: 2

16 Jan 1993

3040-01-370-1388
Mechanical Drive Housing

013701388
9170401-01: RNCC: 3 | RNVC: 2
9170401: RNCC: 5 | RNVC: 2
9170401-01: RNCC: 5 | RNVC: 9
9170401: RNCC: 5 | RNVC: 9

14 Jan 1993

3040-01-361-0572
Shouldered Shaft

013610572
29506362: RNCC: 3 | RNVC: 2
29506362: RNCC: 5 | RNVC: 2
29506362: RNCC: 5 | RNVC: 2

8 Jul 1992

3040-01-361-0573
Shouldered Shaft

013610573
29508166: RNCC: 3 | RNVC: 2
29508166: RNCC: 5 | RNVC: 2
29508166: RNCC: 5 | RNVC: 2

8 Jul 1992

3040-01-317-1579
Rigid Connecting Link

013171579
7339434: RNCC: 3 | RNVC: 2

23 Mar 1990

3040-01-317-1578
Rigid Connecting Link

013171578
13228E6087: RNCC: 3 | RNVC: 2

23 Mar 1990

3040-01-317-2811
Control Cam

013172811
3037-639: RNCC: 3 | RNVC: 2
3037-639: RNCC: 5 | RNVC: 2
X83470-145: RNCC: 5 | RNVC: 9

27 Mar 1990

3040-01-318-6368
Straight Shaft

013186368
6147015: RNCC: 3 | RNVC: 2

21 Apr 1990

3040-01-319-7627
Shouldered Shaft

013197627
413-10988-501: RNCC: 3 | RNVC: 2

15 May 1990

3040-01-320-4262
Rigid Connecting Link

013204262
4074709: RNCC: 3 | RNVC: 2
4074709: RNCC: 5 | RNVC: 2
4074711: RNCC: 5 | RNVC: 2
4074710: RNCC: 5 | RNVC: 2
4074711: RNCC: 5 | RNVC: 2
4071760: RNCC: 5 | RNVC: 2
4074710: RNCC: 5 | RNVC: 2
4071760: RNCC: 5 | RNVC: 2
4074711: RNCC: 5 | RNVC: 9

24 May 1990

3040-01-321-9847
Shouldered Shaft

013219847
953B966-1: RNCC: 3 | RNVC: 2
953B966-1: RNCC: 5 | RNVC: 9

27 Jun 1990

3040-01-322-2516
Counterbalance Weight

013222516
725170-2: RNCC: 3 | RNVC: 2

30 Jun 1990

3040-01-322-9905
Spur Gearshaft

013229905
9341M58G02: RNCC: 3 | RNVC: 2

18 Jul 1990

3040-01-323-9130
Counterbalance Weight

013239130
1588M78P01: RNCC: 3 | RNVC: 2

5 Aug 1990

3040-01-323-9839
Remote Control Lever

013239839
3825093-4: RNCC: 3 | RNVC: 2
3825093-4: RNCC: 5 | RNVC: 2
3825093-4: RNCC: 5 | RNVC: 9
10107024: RNCC: 6 | RNVC: 9

7 Aug 1990

3040-01-324-2096
Spur Gearshaft

013242096
L1800183-013: RNCC: 3 | RNVC: 2
L1800183-013: RNCC: 5 | RNVC: 2
L1800183-013: RNCC: 5 | RNVC: 2

11 Aug 1990

3040-01-324-1980
Bell Crank

013241980
3825095-1: RNCC: 3 | RNVC: 2
3825095-1: RNCC: 5 | RNVC: 2
3825095-1: RNCC: 5 | RNVC: 2
10107025: RNCC: 6 | RNVC: 9

11 Aug 1990

3040-01-325-2147
Control Cam

013252147
3035-412: RNCC: 3 | RNVC: 2

30 Aug 1990

3040-01-325-5463
Shouldered Shaft

013255463
803-5001048-155: RNCC: 3 | RNVC: 2
803-5001048 PC 155: RNCC: 5 | RNVC: 2
803-5001048-100: RNCC: 5 | RNVC: 9
803-5001048 PC 100: RNCC: 5 | RNVC: 9

6 Sep 1990

3040-01-325-4191
Bevel Gearshaft

013254191
1363M84P03: RNCC: 3 | RNVC: 2

4 Sep 1990

3040-01-325-9106
Remote Control Lever

013259106
361129: RNCC: 3 | RNVC: 2
212767-1: RNCC: 3 | RNVC: 2
363330: RNCC: 5 | RNVC: 2
363330: RNCC: 5 | RNVC: 9

13 Sep 1990

3040-01-327-0304
Push-Pull Control Assembly

013270304
87-30365-001: RNCC: 3 | RNVC: 2
87-30365: RNCC: D | RNVC: 9

5 Oct 1990

3040-01-327-0163
Counterbalance Weight

013270163
406-015-113-101: RNCC: 3 | RNVC: 2

5 Oct 1990

3040-01-328-6392
Straight Shaft

013286392
791-4748-003: RNCC: 3 | RNVC: 2

6 Nov 1990

3040-01-330-0017
Remote Control Lever

013300017
XA-03748: RNCC: 3 | RNVC: 2
XA-03748: RNCC: 5 | RNVC: 2
XA-03748: RNCC: 5 | RNVC: 2
XA-7261 ITEM 5: RNCC: 5 | RNVC: 9
XA-7261: RNCC: D | RNVC: 9

28 Nov 1990

3040-01-330-3265
Linear Actuating Cylinder Assembly

013303265
18D-5: RNCC: 3 | RNVC: 2
017261V: RNCC: 5 | RNVC: 2

1 Dec 1990

3040-01-332-1635
Mechanical Drive Housing

013321635
1988947: RNCC: 3 | RNVC: 2
1988947: RNCC: 5 | RNVC: 9

5 Jan 1991

3040-01-336-9228
Flexible Shaft Assembly

013369228
0312-18729-X-01400: RNCC: 3 | RNVC: 2
A-240-9406: RNCC: 3 | RNVC: 2
12359040: RNCC: 7 | RNVC: 2

3 Apr 1991

3040-01-337-4378
Push-Pull Control Assembly

013374378
133771: RNCC: 3 | RNVC: 2
377372: RNCC: 3 | RNVC: 9
1337771: RNCC: 5 | RNVC: 2
1337771: RNCC: 5 | RNVC: 9

14 Apr 1991

3040-01-337-4379
Body Hub

013374379
23016723: RNCC: 3 | RNVC: 2

14 Apr 1991

3040-01-339-5517
Rigid Connecting Link

013395517
335283: RNCC: 3 | RNVC: 2
335283: RNCC: 5 | RNVC: 9

23 May 1991

3040-01-339-9413
Flexible Control Casing

013399413
19392-3: RNCC: 3 | RNVC: 2
6078T71P01: RNCC: 5 | RNVC: 2

4 Jun 1991

3040-01-339-9243
Counterbalance Weight

013399243
4070419CL4: RNCC: 3 | RNVC: 2
4070419CL4: RNCC: 5 | RNVC: 2

4 Jun 1991

3040-01-340-5906
Straight Shaft

013405906
70700-20130-127: RNCC: 3 | RNVC: 2

17 Jun 1991

3040-01-340-7103
Counterbalance Weight

013407103
AS44520-060: RNCC: 3 | RNVC: 9
AS44520-060: RNCC: 5 | RNVC: 2
AS44520-060: RNCC: 5 | RNVC: 9
AS44520-060: RNCC: 5 | RNVC: 9
AS44520-060: RNCC: 5 | RNVC: 9

19 Jun 1991

3040-01-341-0184
Control Cam

013410184
99168-01F: RNCC: 3 | RNVC: 2
16944 FIND NO. 10: RNCC: 5 | RNVC: 9

23 Jun 1991

3040-01-341-0140
Counterbalance Weight

013410140
2301017: RNCC: 3 | RNVC: 2
AS44522-030: RNCC: 5 | RNVC: 2
AS44522-030: RNCC: 5 | RNVC: 2
AS44522-030: RNCC: 5 | RNVC: 9
AS44520 THRU 23: RNCC: 5 | RNVC: 9
AS44522-030: RNCC: 5 | RNVC: 9

23 Jun 1991

3040-01-341-2215
Linear Actuating Cylinder Assembly Parts Kit

013412215
CB252HL005: RNCC: 3 | RNVC: 2

26 Jun 1991

3040-01-341-4995
Linear Actuating Cylinder Assembly Parts Kit

013414995
L070750002: RNCC: 3 | RNVC: 2

1 Jul 1991

3040-01-342-8694
Friction Lining

013428694
90-1600-00400 ITEM 2: RNCC: 3 | RNVC: 9
9630293: RNCC: 5 | RNVC: 2
GB9630293: RNCC: 5 | RNVC: 9
9630293: RNCC: 5 | RNVC: 9
9630293: RNCC: 5 | RNVC: 9
9630293: RNCC: 5 | RNVC: 9
9630241: RNCC: 5 | RNVC: 9
9630293: RNCC: C | RNVC: 1

31 Jul 1991

3040-01-343-0660
Linear Actuating Cylinder

013430660
KG11475: RNCC: 3 | RNVC: 2

4 Aug 1991

3040-01-344-1849
Controllable Swashplate

013441849
741713: RNCC: 3 | RNVC: 2

24 Aug 1991

3040-01-344-5769
Counterbalance Weight

013445769
335-014-405-0: RNCC: 3 | RNVC: 2

31 Aug 1991

3040-01-344-5775
Pivot Shaft Assembly

013445775
1725300 W: RNCC: 3 | RNVC: 2
1725300 W: RNCC: 5 | RNVC: 9

31 Aug 1991

3040-01-345-2047
Linear Actuating Cylinder Assembly

013452047
690233C PIECE 53: RNCC: 3 | RNVC: 2
601449: RNCC: 5 | RNVC: 2
690195 ITEM 53: RNCC: 5 | RNVC: 9
203488: RNCC: 5 | RNVC: 9

13 Sep 1991

3040-01-346-1762
Shouldered Shaft

013461762
SA88220037: RNCC: 3 | RNVC: 2
2GE536: RNCC: 5 | RNVC: 2
2GE536: RNCC: 5 | RNVC: 9

28 Sep 1991

3040-01-346-4754
Worm Shaft

013464754
993240: RNCC: 3 | RNVC: 9
993240-1: RNCC: 5 | RNVC: 9
993600PL FIND 3: RNCC: 5 | RNVC: 9

5 Oct 1991

3040-01-347-5915
Planetary Gears Carrier

013475915
SA88412060: RNCC: 3 | RNVC: 2
2GE436: RNCC: 5 | RNVC: 2
2GE436: RNCC: 5 | RNVC: 9

25 Oct 1991

3040-01-347-8566
Shouldered Shaft

013478566
9245-9951-01: RNCC: 3 | RNVC: 2
9245-9951-01T: RNCC: 5 | RNVC: 9
87034A6052: RNCC: 7 | RNVC: 2

30 Oct 1991

3040-01-347-9049
Bell Crank

013479049
C114588-1: RNCC: 3 | RNVC: 2

31 Oct 1991

3040-01-349-2020
Shouldered Shaft

013492020
5-39MIL1-1606-16: RNCC: 3 | RNVC: 9
5-39MIL1-1606-16: RNCC: 5 | RNVC: 2
5-39MIL1-1606-15: RNCC: 5 | RNVC: 9
5-39MIL1-1606-15: RNCC: 5 | RNVC: 9
5-227 ITEM 15 5-39MIL1-1606: RNCC: 5 | RNVC: 9

22 Nov 1991

3040-01-348-8132
Nonrotating Shaft Eye Bracket

013488132
L220120: RNCC: 3 | RNVC: 2
M240209 FIND 4: RNCC: 5 | RNVC: 2
R016492: RNCC: 5 | RNVC: 2
M240209: RNCC: D | RNVC: 9

16 Nov 1991

3040-01-350-2552
Hydraulic Brake

013502552
0022-519-23-002400: RNCC: 3 | RNVC: 2
D-407252: RNCC: 3 | RNVC: 9
022.519.23.002: RNCC: 5 | RNVC: 9
022.519.23.002-100: RNCC: 5 | RNVC: 9
D-407252: RNCC: 5 | RNVC: 9

13 Dec 1991

3040-01-350-3314
Friction Lining Set

013503314
13.5-8480-17X18X47: RNCC: 3 | RNVC: 2
468480 PIECE 17: RNCC: 5 | RNVC: 2

13 Dec 1991

3040-01-350-9162
Nonrotating Shaft Eye Bracket

013509162
12361561-2: RNCC: 3 | RNVC: 2
12361561-2: RNCC: 5 | RNVC: 2
12361561-2: RNCC: 5 | RNVC: 2
12361561: RNCC: D | RNVC: 9

25 Dec 1991

3040-01-353-4662
Bevel Gearshaft

013534662
9961M35P03: RNCC: 3 | RNVC: 2

11 Feb 1992

3040-01-353-0748
Rigid Connecting Link

013530748
12370782: RNCC: 3 | RNVC: 2

5 Feb 1992

3040-01-354-3353
Shaft Retaining Plate

013543353
520247-1: RNCC: 3 | RNVC: 2

27 Feb 1992

3040-01-354-5430
Pneumatic Actuator Cylinder Housing

013545430
9-734-1000643: RNCC: 3 | RNVC: 2
WLM290093: RNCC: 3 | RNVC: 2
8KP376: RNCC: 5 | RNVC: 2
9-734-1000643: RNCC: 5 | RNVC: 2
9-734-1000643: RNCC: 5 | RNVC: 2
8KP376: RNCC: 5 | RNVC: 9
2CK27: RNCC: C | RNVC: 1

29 Feb 1992

3040-01-354-9075
Adapter Shaft Assembly

013549075
DAA3272P016-431: RNCC: 1 | RNVC: 2
125328C-10: RNCC: 3 | RNVC: 2
125328B-10: RNCC: 5 | RNVC: 9
DAA3272P016-131: RNCC: 5 | RNVC: 9

7 Mar 1992

3040-01-354-9953
Shaft Retaining Plate

013549953
520247-2: RNCC: 3 | RNVC: 2

9 Mar 1992

3040-01-355-0803
Rigid Connecting Link

013550803
4606-537: RNCC: 3 | RNVC: 2
A-C17102-537: RNCC: 5 | RNVC: 2
QPM3510-537: RNCC: 5 | RNVC: 2
17B9F1112-537: RNCC: 7 | RNVC: 2

11 Mar 1992

3040-01-355-9064
Shouldered Shaft Assembly

013559064
1253288-13: RNCC: 3 | RNVC: 2
DAA3272P016-137: RNCC: 5 | RNVC: 2

26 Mar 1992

3040-01-356-2725
Remote Control Lever

013562725
58016-1: RNCC: 3 | RNVC: 2
1869250W: RNCC: 5 | RNVC: 2
1869250W: RNCC: 5 | RNVC: 9

1 Apr 1992

3040-01-356-8672
Shouldered Shaft

013568672
12420-G: RNCC: 3 | RNVC: 2
2GL118: RNCC: 5 | RNVC: 2
12420: RNCC: 5 | RNVC: 2
2GL118: RNCC: 5 | RNVC: 9

12 Apr 1992

3040-01-357-8642
Linear Actuating Cylinder Cap

013578642
23437: RNCC: 3 | RNVC: 2
23437: RNCC: 5 | RNVC: 2

3 May 1992

3040-01-358-6317
Rigid Connecting Link

013586317
17P1A4554-1: RNCC: 3 | RNVC: 2

16 May 1992

3040-01-358-8690
Spur Gearshaft

013588690
17381: RNCC: 3 | RNVC: 2
5938620: RNCC: 5 | RNVC: 2

22 May 1992

3040-01-358-9000
Friction Lining

013589000
3.12.795L: RNCC: 3 | RNVC: 9
3-12-795L(A): RNCC: 5 | RNVC: 2
70143 ITEM-7: RNCC: 5 | RNVC: 2
3-12-795L(A): RNCC: 5 | RNVC: 2
3.12.795L: RNCC: 5 | RNVC: 9
70143: RNCC: D | RNVC: 9

22 May 1992

3040-01-359-5031
Rigid Connecting Link

013595031
12307635-3: RNCC: 3 | RNVC: 2
97393-SR11960A: RNCC: 5 | RNVC: 9
12307635: RNCC: D | RNVC: 9

6 Jun 1992

3040-01-359-6528
Shouldered Shaft

013596528
937510: RNCC: 3 | RNVC: 2
937510: RNCC: 5 | RNVC: 2

10 Jun 1992

3040-01-360-6349
Mechanical Drive Housing

013606349
29506359: RNCC: 3 | RNVC: 2
29506359: RNCC: 5 | RNVC: 2
29506359: RNCC: 5 | RNVC: 2

28 Jun 1992

3040-01-361-2506
Pawl

013612506
320236A: RNCC: 3 | RNVC: 2
320263: RNCC: 3 | RNVC: 9
320236A: RNCC: 5 | RNVC: 9
320236A: RNCC: 5 | RNVC: 9

11 Jul 1992

3040-01-361-6385
Piston Ring Set

013616385
A78093: RNCC: 1 | RNVC: 2
A78093-337PH-99: RNCC: 3 | RNVC: 2
S32152-337-99 PH: RNCC: 3 | RNVC: 9
A78093-337PH-99: RNCC: 5 | RNVC: 2
S32152-337-99 PH: RNCC: 5 | RNVC: 9
S32152: RNCC: D | RNVC: 9

23 Jul 1992

3040-01-363-2541
Pawl

013632541
P1429-208B: RNCC: 3 | RNVC: 2
53X-02-174: RNCC: D | RNVC: 9

27 Aug 1992

3040-01-363-3881
Shouldered Shaft

013633881
274-07609-000: RNCC: 3 | RNVC: 2
274-07609-000: RNCC: 3 | RNVC: 9
615-E-7546 ITEM 4: RNCC: 5 | RNVC: 9
274-C-7609: RNCC: 5 | RNVC: 9
274-7609: RNCC: 5 | RNVC: 9

29 Aug 1992

3040-01-365-2826
Control Cam

013652826
803-5959218 PIECE 12: RNCC: 3 | RNVC: 2
DN10032: RNCC: 5 | RNVC: 2
803-5959218 REV B PIECE 12: RNCC: 5 | RNVC: 9
803-5959218 REV B: RNCC: D | RNVC: 9

5 Oct 1992

3040-01-365-9149
Shouldered Shaft

013659149
22484-1: RNCC: 3 | RNVC: 2

19 Oct 1992

3040-01-367-4637
Worm Shaft

013674637
12950901: RNCC: 3 | RNVC: 2

12 Nov 1992

3040-01-367-4985
Rigid Connecting Link

013674985
715071K03: RNCC: 3 | RNVC: 2
715071-K3: RNCC: 5 | RNVC: 9

13 Nov 1992

3040-01-368-2702
Control Cam

013682702
211044252: RNCC: 3 | RNVC: 2

27 Nov 1992

3040-01-368-0089
Linear Actuating Cylinder Assembly

013680089
K20004014THAZ: RNCC: 3 | RNVC: 2
8802-062: RNCC: 5 | RNVC: 9
SW25564: RNCC: 7 | RNVC: 2

23 Nov 1992

3040-01-368-6570
Linear Actuating Cylinder Assembly

013686570
CYSR5000HY84T2B-325-6350-138-990: RNCC: 3 | RNVC: 2
89156945: RNCC: 5 | RNVC: 9
8707,C020: RNCC: 5 | RNVC: 9
CYSR 5000 HY-84: RNCC: C | RNVC: 1

5 Dec 1992

3040-01-369-7712
Linear Actuating Cylinder Assembly

013697712
89156935: RNCC: 3 | RNVC: 2
CYSR 5000 HY-84T2B-150-700-63-99: RNCC: 3 | RNVC: 9
89156935: RNCC: 5 | RNVC: 9

6 Jan 1993

3040-01-370-1436
Linear Actuating Cylinder Assembly

013701436
6-372-003494: RNCC: 3 | RNVC: 2
6-372-003494: RNCC: 5 | RNVC: 2
6-372-003494: RNCC: 5 | RNVC: 2

14 Jan 1993

3040-01-316-3152
Linear Actuating Cylinder Assembly

013163152
706-40495-010: RNCC: 3 | RNVC: 9
MFIX-3ANC1.50X1.00DAL1A: RNCC: 5 | RNVC: 9

8 Mar 1990

3040-01-317-3626
Shaft Idler

013173626
3-419-501-352-54: RNCC: 3 | RNVC: 2
BA-1345-1 PIECE 6: RNCC: 5 | RNVC: 2

29 Mar 1990

3040-01-319-1259
Counterbalance Weight

013191259
4069996: RNCC: 3 | RNVC: 2

2 May 1990

3040-01-319-1489
Counterbalance Weight

013191489
4071749: RNCC: 3 | RNVC: 2
4071749: RNCC: 5 | RNVC: 2

2 May 1990

3040-01-319-9606
Remote Control Lever

013199606
2677382: RNCC: 3 | RNVC: 2

17 May 1990

3040-01-320-5376
Shouldered Shaft

013205376
3526-098: RNCC: 3 | RNVC: 2

26 May 1990

3040-01-320-9506
Rigid Connecting Link

013209506
4071217-01: RNCC: 3 | RNVC: 2
3040PL0668941: RNCC: 6 | RNVC: 9

6 Jun 1990

3040-01-321-4486
Straight Shaft

013214486
11571032 ITEM 4: RNCC: 3 | RNVC: 2
11571032 ITEM 4: RNCC: 5 | RNVC: 9
11571032 ITEM 4: RNCC: 5 | RNVC: 9

19 Jun 1990

3040-01-322-9362
Rigid Connecting Link

013229362
SW34700-1: RNCC: 3 | RNVC: 2
SW28598: RNCC: 5 | RNVC: 9
SW32247: RNCC: 5 | RNVC: 9
SW34700: RNCC: D | RNVC: 9

17 Jul 1990

3040-01-322-4664
Bell Crank

013224664
1N4674: RNCC: 3 | RNVC: 2

6 Jul 1990

3040-01-323-1347
Rigid Connecting Link

013231347
12553400: RNCC: 3 | RNVC: 2

21 Jul 1990

3040-01-324-1234
Linear Actuating Cylinder Piston

013241234
375 2034 029: RNCC: 3 | RNVC: 2
377 6321 017 ITEM 10: RNCC: 5 | RNVC: 2
377 6321 017: RNCC: D | RNVC: 9

10 Aug 1990

3040-01-325-2357
Shouldered Shaft

013252357
SW28305: RNCC: 3 | RNVC: 2

31 Aug 1990

3040-01-325-2977
Manual Control Lever Assembly

013252977
539856: RNCC: 3 | RNVC: 2
522393: RNCC: 5 | RNVC: 9

31 Aug 1990

3040-01-325-5682
Rigid Connecting Link

013255682
6086293: RNCC: 3 | RNVC: 2

6 Sep 1990

3040-01-325-8109
Pawl

013258109
2046309-2: RNCC: 3 | RNVC: 2

11 Sep 1990

3040-01-326-8635
Linear Actuating Cylinder Piston

013268635
1211335-206: RNCC: 3 | RNVC: 2

3 Oct 1990

3040-01-327-0487
Body Hub

013270487
11515: RNCC: 3 | RNVC: 2
11515: RNCC: 5 | RNVC: 2
11515-G: RNCC: D | RNVC: 9

5 Oct 1990

3040-01-327-2005
Control Cam

013272005
VF-019A-3: RNCC: 3 | RNVC: 2

10 Oct 1990

3040-01-328-8637
Shaft Collar

013288637
12353546: RNCC: 3 | RNVC: 2

8 Nov 1990

3040-01-331-0764
Counterbalance Weight

013310764
3755-9: RNCC: 3 | RNVC: 2
3755-9: RNCC: 5 | RNVC: 2

13 Dec 1990

3040-01-332-3863
Linear Actuating Cylinder Assembly

013323863
160071: RNCC: 3 | RNVC: 2
160071: RNCC: 5 | RNVC: 2

10 Jan 1991

3040-01-333-0213
Brake Disc

013330213
8-003-210-01: RNCC: 3 | RNVC: 2
8-003-210-1: RNCC: 5 | RNVC: 9

21 Jan 1991

3040-01-333-1527
Linear Actuating Cylinder Assembly Parts Kit

013331527
2900381: RNCC: 3 | RNVC: 2
2900381: RNCC: 5 | RNVC: 2

25 Jan 1991

3040-01-333-8467
Shaft Collar

013338467
12916872: RNCC: 3 | RNVC: 2

10 Feb 1991

3040-01-335-7452
Rigid Connecting Link

013357452
10866856: RNCC: 3 | RNVC: 2

13 Mar 1991

3040-01-333-8338
Spur Gearshaft

013338338
406-040-029-101: RNCC: 3 | RNVC: 2
406-040-029: RNCC: D | RNVC: 9

9 Feb 1991

3040-01-336-2586
Turbine Shaft Assembly

013362586
23503793: RNCC: 3 | RNVC: 2
2GH516: RNCC: 5 | RNVC: 2

21 Mar 1991

3040-01-337-7342
Counterbalance Weight

013377342
AT140709: RNCC: 3 | RNVC: 2
AT140709: RNCC: 5 | RNVC: 9

21 Apr 1991

3040-01-337-4385
Rigid Connecting Link

013374385
75A327427-1001: RNCC: 3 | RNVC: 2
75A327427-1001: RNCC: 5 | RNVC: 2
75A327427-1001: RNCC: 5 | RNVC: 9
75A327427-1001: RNCC: 5 | RNVC: 9

14 Apr 1991

3040-01-338-5960
Linear Actuating Cylinder Assembly

013385960
12913199: RNCC: 3 | RNVC: 2

7 May 1991

3040-01-338-7238
Breather

013387238
298206: RNCC: 3 | RNVC: 2
WD-6100 ITEM 16: RNCC: 3 | RNVC: 9
DH1307F-3: RNCC: 5 | RNVC: 9
WD-6100: RNCC: D | RNVC: 9

10 May 1991

3040-01-341-0145
Counterbalance Weight

013410145
2301023: RNCC: 3 | RNVC: 9
AS44522-090: RNCC: 5 | RNVC: 2
AS44522-090: RNCC: 5 | RNVC: 9
AS44522-090: RNCC: 5 | RNVC: 9
AS44522-090: RNCC: 5 | RNVC: 9

23 Jun 1991

3040-01-341-5024
Counterbalance Weight

013415024
2301025: RNCC: 3 | RNVC: 9
AS44522-120: RNCC: 5 | RNVC: 2
AS44522-120: RNCC: 5 | RNVC: 9
AS44520 THRU 23: RNCC: 5 | RNVC: 9
AS44522-120: RNCC: 5 | RNVC: 9
AS44522-120: RNCC: 5 | RNVC: 9

1 Jul 1991

3040-01-341-7096
Multiple Gears Gearshaft

013417096
206363: RNCC: 3 | RNVC: 2

5 Jul 1991

3040-01-345-5698
Shouldered Shaft

013455698
803-1623943 PC 14: RNCC: 3 | RNVC: 2
803-5184173 PC 12: RNCC: 3 | RNVC: 2
803-1623943 PC: RNCC: C | RNVC: 1
803-5184173: RNCC: D | RNVC: 9
803-1623943: RNCC: D | RNVC: 9

21 Sep 1991

3040-01-346-1835
Linear Actuating Cylinder Piston

013461835
EB-EAA-8700U-21-60: RNCC: 3 | RNVC: 2
EAA-8700: RNCC: 5 | RNVC: 9

28 Sep 1991

3040-01-346-2780
Friction Lining

013462780
061-000-091 ITEM 25: RNCC: 3 | RNVC: 2
000120332-000: RNCC: 5 | RNVC: 2
061-000-091: RNCC: D | RNVC: 9

1 Oct 1991

3040-01-346-2781
Friction Lining

013462781
061-000-091 ITEM 27: RNCC: 3 | RNVC: 2
000011937: RNCC: 5 | RNVC: 2
061-000-091: RNCC: D | RNVC: 9

1 Oct 1991

3040-01-346-4219
Spur Gearshaft

013464219
J214644: RNCC: 3 | RNVC: 2
C90007D055: RNCC: 5 | RNVC: 9
PL-H0007D001 REV C ITEM 54: RNCC: 5 | RNVC: 9
PL-H90007D001 R: RNCC: 5 | RNVC: 9

4 Oct 1991

3040-01-348-6491
Remote Control Lever

013486491
3169760-1: RNCC: 3 | RNVC: 2
3169760-1: RNCC: 5 | RNVC: 9
3169760: RNCC: D | RNVC: 9

14 Nov 1991

3040-01-352-0016
Straight Shaft

013520016
3152722: RNCC: 3 | RNVC: 2
783234: RNCC: 5 | RNVC: 2
783234: RNCC: 5 | RNVC: 9

17 Jan 1992

3040-01-352-9140
Spur Gearshaft

013529140
1387210: RNCC: 3 | RNVC: 2
1387210: RNCC: 5 | RNVC: 9
5198319: RNCC: D | RNVC: 9

1 Feb 1992

3040-01-353-0260
Shouldered Shaft Assembly

013530260
40A2219: RNCC: 3 | RNVC: 2

5 Feb 1992

3040-01-350-9079
Breather

013509079
569022-12: RNCC: 3 | RNVC: 2
3181000: RNCC: 7 | RNVC: 2

25 Dec 1991

3040-01-353-8348
Straight Shaft

013538348
622219-1: RNCC: 3 | RNVC: 2
622219-1: RNCC: 5 | RNVC: 2
622219-1: RNCC: 5 | RNVC: 2
622219-1: RNCC: 5 | RNVC: 2
622219-1: RNCC: 5 | RNVC: 2
622219-1: RNCC: 5 | RNVC: 2
622219-1: RNCC: 5 | RNVC: 9
622219-1: RNCC: 5 | RNVC: 9
622219-1: RNCC: 5 | RNVC: 9

18 Feb 1992

3040-01-354-1134
Link Lever To Spider

013541134
206651: RNCC: 3 | RNVC: 2
1245-V-438: RNCC: 5 | RNVC: 9
1245-V-438: RNCC: 5 | RNVC: 9
37249: RNCC: C | RNVC: 1
1245-V-438: RNCC: C | RNVC: 1

25 Feb 1992

3040-01-354-0535
Spur Gearshaft

013540535
803-5959307-X-053: RNCC: 3 | RNVC: 2
803-5959307: RNCC: D | RNVC: 9

21 Feb 1992

3040-01-354-9184
Linear Actuating Cylinder

013549184
6-372-003660: RNCC: 3 | RNVC: 2
2HE952: RNCC: 5 | RNVC: 2
2HE952: RNCC: 5 | RNVC: 9

7 Mar 1992

3040-01-355-0529
Shouldered Shaft

013550529
5224435-2: RNCC: 3 | RNVC: 2
5224435: RNCC: D | RNVC: 9

11 Mar 1992

3040-01-354-4984
Body Hub

013544984
0246657: RNCC: 3 | RNVC: 1
1070T20PC3: RNCC: 5 | RNVC: 1

29 Feb 1992

3040-01-355-5042
Electrical-Fluid Pressure Connector Assembly

013555042
4101103001: RNCC: 3 | RNVC: 2
4101-103-000: RNCC: 5 | RNVC: 9

19 Mar 1992

3040-01-356-8673
Shouldered Shaft

013568673
12417: RNCC: 3 | RNVC: 2
12417: RNCC: 5 | RNVC: 9
12417-G: RNCC: 5 | RNVC: 9

12 Apr 1992

3040-01-357-0656
Flexible Shaft Assembly Core

013570656
75A603508-2009: RNCC: 3 | RNVC: 2
DS23/2-123.760: RNCC: 5 | RNVC: 9
75A603508: RNCC: D | RNVC: 9

16 Apr 1992

3040-01-357-5850
Straight Shaft

013575850
53X-01-155: RNCC: 3 | RNVC: 9
53X-01-155: RNCC: C | RNVC: 1

27 Apr 1992

3040-01-358-6316
Rigid Connecting Link

013586316
17P1A4553-1: RNCC: 3 | RNVC: 2
17P1A4553-1: RNCC: 5 | RNVC: 2

16 May 1992

3040-01-360-2416
Pneumatic Actuator Cylinder Housing

013602416
1939640: RNCC: 3 | RNVC: 2
1939640: RNCC: 5 | RNVC: 2
1939640: RNCC: 7 | RNVC: 9

20 Jun 1992

3040-01-360-4452
Linear Actuating Cylinder Piston

013604452
171.07.003.01: RNCC: 3 | RNVC: 2

24 Jun 1992

3040-01-360-4449
Mechanical Drive Housing

013604449
29537062: RNCC: 3 | RNVC: 2
29502273: RNCC: 5 | RNVC: 9
23048044: RNCC: 5 | RNVC: 9

24 Jun 1992

3040-01-360-6523
Mechanically Actuated Spindle

013606523
29537934: RNCC: 3 | RNVC: 2
29501574: RNCC: 5 | RNVC: 2
29501574: RNCC: 5 | RNVC: 2
29501574: RNCC: 5 | RNVC: 9
029200T: RNCC: C | RNVC: 1

28 Jun 1992

3040-01-362-0941
Control Cam

013620941
3037-555: RNCC: 3 | RNVC: 2

1 Aug 1992

3040-01-362-3044
Linear Actuating Cylinder Assembly

013623044
H77R2B-400-3800-175-S11-9: RNCC: 3 | RNVC: 9
CYSR4000HY77K2B-400-3800-990: RNCC: 5 | RNVC: 9
89156903: RNCC: 5 | RNVC: 9

4 Aug 1992

3040-01-363-2474
Spur Gearshaft

013632474
3860413-1: RNCC: 3 | RNVC: 2
3860413: RNCC: D | RNVC: 9

27 Aug 1992

3040-01-363-4370
Linear Actuating Cylinder Piston Rod

013634370
2244M1105: RNCC: 3 | RNVC: 2
2244M1105: RNCC: 5 | RNVC: 2
2244M1105: RNCC: 5 | RNVC: 2
4-62272 ITEM 22: RNCC: 5 | RNVC: 9
2244M1105: RNCC: 5 | RNVC: 9
4-62272: RNCC: D | RNVC: 9

29 Aug 1992

3040-01-366-3826
Shouldered Shaft

013663826
88019-124-1: RNCC: 3 | RNVC: 2

24 Oct 1992

3040-01-367-0139
Shouldered Shaft

013670139
20781-1000: RNCC: 3 | RNVC: 2
20781-001 FIND 8: RNCC: 5 | RNVC: 9

5 Nov 1992

3040-01-367-5495
Accumulator Cap

013675495
12910595-2: RNCC: 3 | RNVC: 2

14 Nov 1992

3040-01-368-7626
Counterbalance Weight

013687626
A44-B5494: RNCC: 3 | RNVC: 2
B5494: RNCC: 5 | RNVC: 9

8 Dec 1992

3040-01-369-2050
Shouldered Shaft

013692050
756776: RNCC: 3 | RNVC: 2

17 Dec 1992

3040-01-369-9146
Shouldered Shaft

013699146
123-6225708 PC 84: RNCC: 3 | RNVC: 2

8 Jan 1993

3040-01-370-0189
Piston Rod Ring

013700189
6-753-000846: RNCC: 3 | RNVC: 2
6-753-000846: RNCC: 5 | RNVC: 2
6-753-000846: RNCC: 5 | RNVC: 2

11 Jan 1993

3040-01-369-9322
Nonrotating Shaft Eye Bracket

013699322
S-1-552-M: RNCC: 3 | RNVC: 2

8 Jan 1993

3040-01-370-1431
Linear Actuating Cylinder Assembly

013701431
CYSR 5000 HY72T2B200663100990: RNCC: 3 | RNVC: 2
89156924: RNCC: 5 | RNVC: 2
89156924: RNCC: 5 | RNVC: 9
CYSR 5000 HY72T2B200663100990: RNCC: 5 | RNVC: 9

14 Jan 1993

3040-01-349-6013
Linear Actuating Cylinder Assembly Parts Kit

013496013
21228-9500: RNCC: 3 | RNVC: 2
21228-9500: RNCC: 5 | RNVC: 9
21228-9500: RNCC: 5 | RNVC: 9

29 Nov 1991

3040-01-350-6353
Manual Control Lever

013506353
12370918: RNCC: 3 | RNVC: 2

19 Dec 1991

3040-01-353-4693
Bell Crank

013534693
17P6F1054-1: RNCC: 3 | RNVC: 2

11 Feb 1992

3040-01-361-2507
Rigid Connecting Link

013612507
12592206: RNCC: 1 | RNVC: 2
ED7015-2: RNCC: 3 | RNVC: 2
12592206: RNCC: 5 | RNVC: 9

11 Jul 1992

3040-01-361-6386
Piston Ring Set

013616386
S32152-345-99 PH: RNCC: 3 | RNVC: 2
A78093-345PH-99: RNCC: 5 | RNVC: 2
S32152-345-99 PH: RNCC: 5 | RNVC: 9
S32152: RNCC: 5 | RNVC: 9
A78093: RNCC: D | RNVC: 9

23 Jul 1992

3040-01-362-3515
Mechanical Drive Housing

013623515
21-P-482: RNCC: 3 | RNVC: 2
21-P-482: RNCC: 5 | RNVC: 2
21-P-482: RNCC: 5 | RNVC: 2
21-P-482: RNCC: 5 | RNVC: 9
21-P-482: RNCC: C | RNVC: 1

5 Aug 1992

3040-01-362-4528
Piston Ring

013624528
116166-2: RNCC: 3 | RNVC: 2

6 Aug 1992

3040-01-358-6150
Shouldered Shaft

013586150
3502025-1: RNCC: 3 | RNVC: 2
3502025: RNCC: D | RNVC: 9

16 May 1992

3040-01-357-5952
Shaft Collar

013575952
65363-06006-102: RNCC: 3 | RNVC: 2

27 Apr 1992

3040-01-365-1942
Rigid Connecting Link

013651942
1348AS1016: RNCC: 3 | RNVC: 2
1348AS1016: RNCC: 5 | RNVC: 2

2 Oct 1992

3040-01-316-0599
Mechanical Drive Housing

013160599
5266275-001: RNCC: 3 | RNVC: 2
5266275: RNCC: D | RNVC: 9

2 Mar 1990

3040-01-316-0562
Counterbalance Weight

013160562
3755-2: RNCC: 3 | RNVC: 2
3755-2: RNCC: 5 | RNVC: 2
3040PL0928078: RNCC: 6 | RNVC: 9

2 Mar 1990

3040-01-316-0563
Counterbalance Weight

013160563
3755: RNCC: 3 | RNVC: 2
3755-3: RNCC: 5 | RNVC: 2
3755-3: RNCC: 5 | RNVC: 9
3040PL0928074: RNCC: 6 | RNVC: 9

2 Mar 1990

3040-01-316-3468
Linear Actuating Cylinder Assembly Parts Kit

013163468
L065110000: RNCC: 3 | RNVC: 2

8 Mar 1990

3040-01-316-4697
Shouldered Shaft

013164697
968051-1: RNCC: 3 | RNVC: 2
968051: RNCC: D | RNVC: 9

9 Mar 1990

3040-01-316-3470
Linear Actuating Cylinder Assembly Parts Kit

013163470
L065100000: RNCC: 3 | RNVC: 2

8 Mar 1990

3040-01-316-7286
Rotating Shaft Eye Bracket

013167286
4074199: RNCC: 3 | RNVC: 2
4074199: RNCC: 5 | RNVC: 2
4074199: RNCC: 5 | RNVC: 2
3040PL0668528: RNCC: 6 | RNVC: 9

14 Mar 1990

3040-01-316-4875
Rigid Connecting Link

013164875
191158H2: RNCC: 3 | RNVC: 9
191158H2: RNCC: 5 | RNVC: 2
1977947: RNCC: 5 | RNVC: 2
1977947: RNCC: 5 | RNVC: 2
1977947: RNCC: 5 | RNVC: 9

9 Mar 1990

3040-01-317-0367
Rigid Connecting Link

013170367
23610: RNCC: 3 | RNVC: 2
3040013170367: RNCC: 6 | RNVC: 9

22 Mar 1990

3040-01-318-7943
Mechanical Drive Housing

013187943
169-219-120-414-004: RNCC: 3 | RNVC: 2
169-219-120-414-004: RNCC: 5 | RNVC: 2

25 Apr 1990

3040-01-318-9733
Linear Actuating Cylinder Assembly Parts Kit

013189733
L045800000: RNCC: 3 | RNVC: 2

28 Apr 1990

3040-01-319-1486
Counterbalance Weight

013191486
4071746: RNCC: 3 | RNVC: 2

2 May 1990

3040-01-319-1488
Counterbalance Weight

013191488
4071748: RNCC: 3 | RNVC: 2
4071748: RNCC: 5 | RNVC: 2

2 May 1990

3040-01-320-4715
Rigid Connecting Link

013204715
4071215-01: RNCC: 3 | RNVC: 2
4071215-01: RNCC: 5 | RNVC: 2
3040PL0668584: RNCC: 6 | RNVC: 9

25 May 1990

3040-01-322-6289
Shouldered Shaft

013226289
135B5803-4: RNCC: 3 | RNVC: 2
135B5803: RNCC: D | RNVC: 9

11 Jul 1990

3040-01-323-9131
Counterbalance Weight

013239131
1588M77P01: RNCC: 3 | RNVC: 2

5 Aug 1990

3040-01-323-3415
Shouldered Shaft

013233415
7002536: RNCC: 3 | RNVC: 2
7002536-1: RNCC: 5 | RNVC: 2
7002536-1: RNCC: 5 | RNVC: 2
7002536-1: RNCC: 5 | RNVC: 9
10107021: RNCC: 6 | RNVC: 9
7002536: RNCC: E | RNVC: 8

26 Jul 1990

3040-01-325-2290
Remote Control Lever

013252290
212854-1: RNCC: 3 | RNVC: 2
363079: RNCC: 5 | RNVC: 9

31 Aug 1990

3040-01-325-2354
Straight Shaft

013252354
LG0371-01: RNCC: 3 | RNVC: 2
421966: RNCC: 5 | RNVC: 2
LG0553: RNCC: D | RNVC: 9

31 Aug 1990

3040-01-326-0307
Shouldered Shaft

013260307
218227-1: RNCC: 3 | RNVC: 2

16 Sep 1990

3040-01-326-9028
Extension Shaft

013269028
11724: RNCC: 3 | RNVC: 2
26KP497: RNCC: 5 | RNVC: 2
26KP497: RNCC: 5 | RNVC: 9
11724: RNCC: 5 | RNVC: 9
11724-G: RNCC: D | RNVC: 9

3 Oct 1990

3040-01-326-9122
Shouldered Shaft

013269122
23015: RNCC: 3 | RNVC: 2

3 Oct 1990

3040-01-326-0859
Linear Actuating Cylinder Piston

013260859
3831003-109: RNCC: 3 | RNVC: 2
3831003-109: RNCC: 3 | RNVC: 9

18 Sep 1990

3040-01-327-0143
Straight Shaft

013270143
16-12373-000: RNCC: 3 | RNVC: 2
16-13470-000: RNCC: 5 | RNVC: 9
16-12373: RNCC: D | RNVC: 9

5 Oct 1990

3040-01-327-2035
Linear Actuating Cylinder Assembly

013272035
50607303: RNCC: 3 | RNVC: 2
21173-5000: RNCC: 5 | RNVC: 2
21173-5000: RNCC: 5 | RNVC: 9
607303: RNCC: 5 | RNVC: 9

10 Oct 1990

3040-01-327-7768
Rigid Connecting Link

013277768
60511579-1: RNCC: 3 | RNVC: 2
60511579-1: RNCC: 5 | RNVC: 9
60511579: RNCC: 5 | RNVC: 9

21 Oct 1990

3040-01-330-2206
Flexible Shaft Assembly

013302206
005352V166: RNCC: 3 | RNVC: 2
446900-1X-166: RNCC: 5 | RNVC: 9
005352V166: RNCC: 5 | RNVC: 9

30 Nov 1990

3040-01-331-4832
Shouldered Shaft

013314832
3825043-1: RNCC: 3 | RNVC: 2
3825043-1: RNCC: 5 | RNVC: 2
3825043-1: RNCC: 5 | RNVC: 2

20 Dec 1990

3040-01-332-6924
Shouldered Shaft

013326924
4W7995: RNCC: 3 | RNVC: 2
7W1282 IT 1: RNCC: 5 | RNVC: 2
3-349-045-463-BE: RNCC: 5 | RNVC: 2

15 Jan 1991

3040-01-333-8288
Electrical-Fluid Pressure Connector Assembly

013338288
A624-1327: RNCC: 3 | RNVC: 2

9 Feb 1991

3040-01-337-4167
Linear Actuating Cylinder Piston

013374167
23017262: RNCC: 3 | RNVC: 2

14 Apr 1991

3040-01-337-4386
Rigid Connecting Link

013374386
75A327429-1001: RNCC: 3 | RNVC: 9
75A327429: RNCC: 5 | RNVC: 1
75A327429-1001: RNCC: 5 | RNVC: 2
75A327429-1001: RNCC: 5 | RNVC: 9
75A327429: RNCC: 5 | RNVC: 9
75A327429-1001: RNCC: 5 | RNVC: 9
75A327429-1001: RNCC: 5 | RNVC: 9
75A327429-1001: RNCC: 5 | RNVC: 9
75A327429: RNCC: 5 | RNVC: 9

14 Apr 1991

3040-01-338-7601
Multiple Gears Gearshaft

013387601
1843600U: RNCC: 3 | RNVC: 2
1843600U: RNCC: 5 | RNVC: 9

10 May 1991

3040-01-338-9642
Shouldered Shaft Assembly

013389642
5008099: RNCC: 3 | RNVC: 2

14 May 1991

3040-01-338-4428
Shouldered Shaft

013384428
6532D757-1: RNCC: 3 | RNVC: 2
6532D757-1: RNCC: 5 | RNVC: 2
6532D757: RNCC: D | RNVC: 9

3 May 1991

3040-01-340-5905
Straight Shaft

013405905
9514175: RNCC: 3 | RNVC: 2
9514175: RNCC: 5 | RNVC: 9

17 Jun 1991

3040-01-340-6054
Bell Crank

013406054
A333017R: RNCC: 3 | RNVC: 2
A343024 IT 2: RNCC: 5 | RNVC: 2
A343024: RNCC: D | RNVC: 9

17 Jun 1991

3040-01-340-6059
Pawl

013406059
6532D343-3: RNCC: 3 | RNVC: 2
6532D343: RNCC: D | RNVC: 9

17 Jun 1991

3040-01-340-7105
Counterbalance Weight

013407105
2301019: RNCC: 3 | RNVC: 2
AS44522-050: RNCC: 5 | RNVC: 2
AS44522-050: RNCC: 5 | RNVC: 9
AS44522-050: RNCC: 5 | RNVC: 9
AS44522-050: RNCC: 5 | RNVC: 9

19 Jun 1991

3040-01-340-7121
Manual Control Lever Assembly

013407121
8451739: RNCC: 3 | RNVC: 2
8451739: RNCC: 5 | RNVC: 9

19 Jun 1991

3040-01-340-5914
Shouldered Shaft

013405914
70700-20130-131: RNCC: 3 | RNVC: 2

17 Jun 1991

3040-01-341-0146
Counterbalance Weight

013410146
2301024: RNCC: 3 | RNVC: 9
AS44522-100: RNCC: 5 | RNVC: 2
AS44522-100: RNCC: 5 | RNVC: 9
AS44522-100: RNCC: 5 | RNVC: 9
AS44520THRU23: RNCC: 5 | RNVC: 9
AS44522-100: RNCC: 5 | RNVC: 9

23 Jun 1991

3040-01-341-0189
Manual Control Lever

013410189
C-0907A: RNCC: 3 | RNVC: 2
16944 FIND NO. 16: RNCC: 5 | RNVC: 9

23 Jun 1991

3040-01-342-0624
Shouldered Shaft

013420624
650-3714-00: RNCC: 3 | RNVC: 2
384-1675-00: RNCC: 5 | RNVC: 9

14 Jul 1991

3040-01-344-1893
Linear Actuating Cylinder Assembly

013441893
AHC12196: RNCC: 3 | RNVC: 2
AH150044: RNCC: 5 | RNVC: 9
RE27701: RNCC: 5 | RNVC: 9
AH15044: RNCC: 5 | RNVC: 9
RE27701: RNCC: 5 | RNVC: 9

24 Aug 1991

3040-01-344-1967
Nonrotating Shaft Eye Bracket

013441967
741719: RNCC: 3 | RNVC: 2

24 Aug 1991

3040-01-344-5747
Shouldered Shaft

013445747
12376-G: RNCC: 3 | RNVC: 2

31 Aug 1991

3040-01-345-3698
Counterbalance Weight

013453698
335-014-404-0: RNCC: 3 | RNVC: 2

18 Sep 1991

3040-01-346-3239
Rigid Connecting Link

013463239
18-17999-000: RNCC: 3 | RNVC: 2
18-17999: RNCC: D | RNVC: 9

3 Oct 1991

3040-01-346-3241
Rigid Connecting Link

013463241
18-23504-001: RNCC: 3 | RNVC: 2
18-23504: RNCC: D | RNVC: 9

3 Oct 1991

3040-01-346-4191
Brake Disc

013464191
5A6-03520-1: RNCC: 3 | RNVC: 2
5A6-03520: RNCC: D | RNVC: 9

4 Oct 1991

3040-01-346-4428
Linear Actuating Cylinder Assembly

013464428
01.50-CKC2HT14ACX3.00: RNCC: 3 | RNVC: 2
D151-42-24S-7X3(SAEPORTS): RNCC: 5 | RNVC: 2
1.50CKC2HT14AC3.0: RNCC: 5 | RNVC: 9
D151-42H-14-7X3: RNCC: 5 | RNVC: 9

5 Oct 1991

3040-01-346-9818
Brake Shoe

013469818
M900742: RNCC: 3 | RNVC: 2
M900742: RNCC: 5 | RNVC: 9

12 Oct 1991

3040-01-346-9898
Linear Actuating Cylinder Assembly

013469898
30222-01: RNCC: 3 | RNVC: 9
1870-18: RNCC: 5 | RNVC: 9

12 Oct 1991

3040-01-347-7921
Breather

013477921
6310226-138: RNCC: 1 | RNVC: 2
WC-00394-41D5BVA: RNCC: 3 | RNVC: 2
WC-00394-41D5BVA: RNCC: 5 | RNVC: 2
WE-00394-41B: RNCC: 5 | RNVC: 9
6310226-138: RNCC: 5 | RNVC: 9

29 Oct 1991

3040-01-352-6069
Shouldered Shaft

013526069
G453236-1: RNCC: 3 | RNVC: 2
G453236-1: RNCC: 5 | RNVC: 2
G453236-1: RNCC: 5 | RNVC: 9

29 Jan 1992

3040-01-352-3838
Push-Pull Control Assembly

013523838
446900-1H-144: RNCC: 3 | RNVC: 2
HXOSH12BZ1: RNCC: 5 | RNVC: 2
1867930: RNCC: 5 | RNVC: 2
1867930: RNCC: 7 | RNVC: 9

25 Jan 1992

3040-01-352-3782
Shouldered Shaft

013523782
5198321: RNCC: 3 | RNVC: 2
1387212: RNCC: 5 | RNVC: 2
1387212: RNCC: 5 | RNVC: 9

25 Jan 1992

3040-01-352-4082
Bevel Gearshaft

013524082
9961M31G03: RNCC: 3 | RNVC: 2

25 Jan 1992

3040-01-353-8504
Straight Shaft

013538504
6-810-002274: RNCC: 3 | RNVC: 2
6-810-002274: RNCC: 5 | RNVC: 2
6-810-002274: RNCC: 5 | RNVC: 2
2HE983: RNCC: C | RNVC: 1

19 Feb 1992

3040-01-354-0570
Rigid Connecting Link

013540570
206667: RNCC: 3 | RNVC: 2
1245-U-437: RNCC: 5 | RNVC: 9
1245-U-437: RNCC: 5 | RNVC: 9
1245-U-437: RNCC: C | RNVC: 1

21 Feb 1992

3040-01-354-2757
Idler Assembly

013542757
17P6P9428-501: RNCC: 3 | RNVC: 2
17P6P9428-1: RNCC: 3 | RNVC: 9

26 Feb 1992

3040-01-354-9062
Straight Shaft

013549062
6-810-002159: RNCC: 3 | RNVC: 2
2HE949: RNCC: C | RNVC: 1

7 Mar 1992

3040-01-354-9077
Adapter Shaft Assembly

013549077
125328B-6: RNCC: 3 | RNVC: 2
DAA3272P016-123: RNCC: 5 | RNVC: 2

7 Mar 1992

3040-01-355-0559
Mechanical Drive Housing

013550559
2GK306: RNCC: 3 | RNVC: 2
21625-4: RNCC: 3 | RNVC: 2
21625-4: RNCC: 5 | RNVC: 9
2GK306: RNCC: 5 | RNVC: 9
21625-4: RNCC: 5 | RNVC: 9

11 Mar 1992

3040-01-355-0629
Rigid Connecting Link

013550629
ML7-22.31: RNCC: 3 | RNVC: 2
1728080: RNCC: 5 | RNVC: 2
1728080: RNCC: 5 | RNVC: 9
L1/3D3/3/22.3: RNCC: 5 | RNVC: 9

11 Mar 1992

3040-01-361-0649
Linear Actuating Cylinder

013610649
6965-TA: RNCC: 3 | RNVC: 2
8909A354-001: RNCC: 5 | RNVC: 2
8909A354-001: RNCC: 5 | RNVC: 9

8 Jul 1992

3040-01-361-2505
Body Hub

013612505
2W7565: RNCC: 3 | RNVC: 2
2W7565: RNCC: 5 | RNVC: 2
2W7565: RNCC: 5 | RNVC: 2

11 Jul 1992

3040-01-355-9141
Multiple Gears Gearshaft

013559141
748965: RNCC: 3 | RNVC: 2

26 Mar 1992

3040-01-361-0760
Shaft Retaining Plate

013610760
29503046: RNCC: 3 | RNVC: 2
29503046: RNCC: 5 | RNVC: 2
29503046: RNCC: 5 | RNVC: 2

8 Jul 1992

3040-01-356-8671
Straight Shaft

013568671
25614: RNCC: 3 | RNVC: 2
230044: RNCC: 5 | RNVC: 2
25614: RNCC: 5 | RNVC: 2

12 Apr 1992

3040-01-356-2707
Linear Actuating Cylinder Assembly

013562707
150235B: RNCC: 3 | RNVC: 2
1860860: RNCC: 3 | RNVC: 2
150235B: RNCC: 5 | RNVC: 2
1860860: RNCC: 5 | RNVC: 9

1 Apr 1992

3040-01-357-4174
Flexible Drive Shaft

013574174
FSV-72: RNCC: 3 | RNVC: 2
12361834: RNCC: 5 | RNVC: 9
0312-15044-Y-010.00: RNCC: 5 | RNVC: 9
12361834: RNCC: 5 | RNVC: 9
12361834: RNCC: D | RNVC: 9

23 Apr 1992

3040-01-357-4533
Bell Crank

013574533
4079028: RNCC: 3 | RNVC: 2
4079028: RNCC: 5 | RNVC: 2
3040PL0669167: RNCC: 6 | RNVC: 9

23 Apr 1992

3040-01-363-5553
Mechanical Drive Housing

013635553
522R686G01: RNCC: 3 | RNVC: 2

1 Sep 1992

3040-01-364-5402
Linear Actuating Cylinder Assembly

013645402
B-WK-406-C-1-B: RNCC: 3 | RNVC: 2
B-WK-406-C-1-B ITEM 1: RNCC: 5 | RNVC: 9
B-WK-406-C-1-B: RNCC: 5 | RNVC: 9

22 Sep 1992

3040-01-359-8298
Straight Shaft

013598298
1220B1058: RNCC: 3 | RNVC: 2
1220B1058: RNCC: 5 | RNVC: 9

13 Jun 1992

3040-01-360-4448
Mechanical Drive Housing

013604448
16221: RNCC: 3 | RNVC: 2
5938679: RNCC: 5 | RNVC: 2

24 Jun 1992

3040-01-365-2925
Straight Shaft

013652925
MBEU145886: RNCC: 3 | RNVC: 2
MBEU145886: RNCC: 5 | RNVC: 2

5 Oct 1992

3040-01-366-0779
Push-Pull Control Assembly

013660779
12351252-3: RNCC: 3 | RNVC: 2
12351252-3: RNCC: 5 | RNVC: 2
12351252-3: RNCC: 5 | RNVC: 2
12351252: RNCC: D | RNVC: 9

21 Oct 1992

3040-01-366-9586
Linear Actuating Cylinder Assembly

013669586
CYSR5000HY84T2B-250-425-100-990: RNCC: 3 | RNVC: 9
89156912: RNCC: 5 | RNVC: 9

4 Nov 1992

3040-01-369-6635
Pawl

013696635
12524523: RNCC: 3 | RNVC: 2
465-4523: RNCC: 5 | RNVC: 2
465-4523: RNCC: 5 | RNVC: 9

31 Dec 1992

3040-01-370-1349
Straight Shaft

013701349
6-689-001008: RNCC: 3 | RNVC: 2
6-689-001008: RNCC: 5 | RNVC: 2
6-689-001008: RNCC: 5 | RNVC: 2

14 Jan 1993

3040-01-316-0567
Counterbalance Weight

013160567
3755-7: RNCC: 3 | RNVC: 2
3755-7: RNCC: 5 | RNVC: 2

2 Mar 1990

3040-01-316-3261
Flexible Shaft Assembly

013163261
1858851: RNCC: 3 | RNVC: 2
1977616 ITEM 7: RNCC: 5 | RNVC: 2

8 Mar 1990

3040-01-316-6826
Shaft Idler

013166826
3-375-501-41G: RNCC: 3 | RNVC: 2

13 Mar 1990

3040-01-318-0847
Control Cam

013180847
056550: RNCC: 3 | RNVC: 2
933D056550: RNCC: 5 | RNVC: 9

12 Apr 1990

3040-01-319-0848
Shaft Retaining Plate

013190848
J-35652-B: RNCC: 3 | RNVC: 2
J35652: RNCC: 5 | RNVC: 9

1 May 1990

3040-01-319-3601
Worm Shaft

013193601
88054: RNCC: 3 | RNVC: 2
81036: RNCC: 5 | RNVC: 9
88054: RNCC: 5 | RNVC: 9

5 May 1990

3040-01-319-1256
Counterbalance Weight

013191256
4068999: RNCC: 3 | RNVC: 2

2 May 1990

3040-01-319-6983
Rotating Shaft Eye Bracket

013196983
8929111: RNCC: 3 | RNVC: 2
DDE 08929111: RNCC: 5 | RNVC: 2

12 May 1990

3040-01-321-4542
Manual Control Lever

013214542
14971-5704-0: RNCC: 3 | RNVC: 9
14971-5704-1: RNCC: 5 | RNVC: 9
3040013214542: RNCC: 6 | RNVC: 9

19 Jun 1990

3040-01-321-5101
Rigid Connecting Link

013215101
4069547: RNCC: 3 | RNVC: 2
4069547: RNCC: 5 | RNVC: 2
3040PL0669009: RNCC: 6 | RNVC: 9

19 Jun 1990

3040-01-322-9029
Rigid Connecting Link

013229029
2W4628: RNCC: 3 | RNVC: 2
3740-035: RNCC: 5 | RNVC: 2

17 Jul 1990

3040-01-323-0000
Remote Control Lever

013230000
9501M95G02: RNCC: 3 | RNVC: 2

18 Jul 1990

3040-01-325-0171
Rigid Connecting Link

013250171
L3005970-001: RNCC: 3 | RNVC: 2
L3005970-001: RNCC: 5 | RNVC: 2

26 Aug 1990

3040-01-325-4131
Mechanical Drive Housing

013254131
4070028: RNCC: 3 | RNVC: 2
4070028: RNCC: 5 | RNVC: 2

4 Sep 1990

3040-01-326-7771
Rigid Connecting Link

013267771
12379346: RNCC: 3 | RNVC: 2

30 Sep 1990

3040-01-327-2763
Extension Shaft

013272763
22516: RNCC: 3 | RNVC: 2
22516: RNCC: 5 | RNVC: 1
25162: RNCC: 5 | RNVC: 9

11 Oct 1990

3040-01-328-5573
Manual Control Lever

013285573
7135-75E: RNCC: 3 | RNVC: 2
3040PL0825520: RNCC: 6 | RNVC: 9

4 Nov 1990

3040-01-329-3052
Rigid Connecting Link

013293052
74T030352-1001: RNCC: 3 | RNVC: 2
74T030352-1001: RNCC: 5 | RNVC: 2
77T030352-1001: RNCC: 5 | RNVC: 2

15 Nov 1990

3040-01-329-7553
Rigid Connecting Link

013297553
12299025-9: RNCC: 3 | RNVC: 2
10386418: RNCC: 6 | RNVC: 9
12299025: RNCC: D | RNVC: 9

22 Nov 1990

3040-01-330-2491
Disk Brake Shoe

013302491
530007: RNCC: 3 | RNVC: 2
001554T: RNCC: 5 | RNVC: 2

30 Nov 1990

3040-01-331-4993
Remote Control Lever

013314993
7002752-2: RNCC: 3 | RNVC: 2
7002752-2: RNCC: 5 | RNVC: 2

20 Dec 1990

3040-01-331-6523
Linear Actuating Cylinder

013316523
VSM-5396: RNCC: 3 | RNVC: 2
03808722 VSM-5396: RNCC: 5 | RNVC: 2
03890423-01-VSM-5396: RNCC: 5 | RNVC: 9
VSM-5396: RNCC: C | RNVC: 1
03808722: RNCC: D | RNVC: 9

22 Dec 1990

3040-01-331-7117
Counterbalance Weight

013317117
1558M63P02: RNCC: 3 | RNVC: 2
1558M63P02: RNCC: C | RNVC: 1

23 Dec 1990

3040-01-332-3837
Shouldered Shaft

013323837
68A831329-2001: RNCC: 3 | RNVC: 2

10 Jan 1991

3040-01-332-0768
Control Cam

013320768
7002761-4: RNCC: 3 | RNVC: 2
7002761-4: RNCC: 5 | RNVC: 2
7002761-4: RNCC: 5 | RNVC: 9
7002761: RNCC: 5 | RNVC: 9

3 Jan 1991

3040-01-334-4764
Extension Shaft

013344764
9032757-01: RNCC: 3 | RNVC: 2

23 Feb 1991

3040-01-335-9851
Control Cam

013359851
12916762: RNCC: 3 | RNVC: 2

17 Mar 1991

3040-01-336-3656
Rigid Connecting Link

013363656
12916805: RNCC: 3 | RNVC: 2

24 Mar 1991

3040-01-334-7522
Shouldered Shaft

013347522
5N1913: RNCC: 3 | RNVC: 2
5N1923 IT 5: RNCC: 5 | RNVC: 2

27 Feb 1991

3040-01-337-4384
Rigid Connecting Link

013374384
75A327426-1001: RNCC: 3 | RNVC: 2
75A327426-1001: RNCC: 5 | RNVC: 2
75A327426-1001: RNCC: 5 | RNVC: 9
75A327426-1001: RNCC: 5 | RNVC: 9

14 Apr 1991

3040-01-337-7575
Rigid Connecting Link

013377575
12913196: RNCC: 3 | RNVC: 2

21 Apr 1991

3040-01-337-4368
Nonrotating Shaft Eye Bracket

013374368
1 422 130 011: RNCC: 3 | RNVC: 2
1 422 130 011: RNCC: 5 | RNVC: 9

14 Apr 1991

3040-01-339-1583
Shouldered Shaft

013391583
762817: RNCC: 3 | RNVC: 2
751608: RNCC: 5 | RNVC: 9

17 May 1991

3040-01-339-5516
Rigid Connecting Link

013395516
324685: RNCC: 3 | RNVC: 2
324685: RNCC: 5 | RNVC: 9

23 May 1991

3040-01-339-3669
Bell Crank

013393669
510212G2: RNCC: 3 | RNVC: 2
510212G2: RNCC: 5 | RNVC: 9
510212: RNCC: D | RNVC: 9

21 May 1991

3040-01-341-2399
Counterbalance Weight

013412399
AS44520-020: RNCC: 3 | RNVC: 2
AS44520-020: RNCC: 5 | RNVC: 2
AS44520-020: RNCC: 5 | RNVC: 9
AS44520-020: RNCC: 5 | RNVC: 9
AS44520-020: RNCC: 5 | RNVC: 9

26 Jun 1991

3040-01-341-4994
Linear Actuating Cylinder Assembly Parts Kit

013414994
RK2AHL0255: RNCC: 3 | RNVC: 2

1 Jul 1991

3040-01-342-6815
Counterbalance Weight

013426815
2301005: RNCC: 3 | RNVC: 9
AS44520-050: RNCC: 5 | RNVC: 2
AS44520-050: RNCC: 5 | RNVC: 9
AS44520-050: RNCC: 5 | RNVC: 9
AS44520-050: RNCC: 5 | RNVC: 9
AS44520-050: RNCC: 5 | RNVC: 9
AS44520-050: RNCC: C | RNVC: 1

29 Jul 1991

3040-01-344-1971
Pawl

013441971
116289-2: RNCC: 3 | RNVC: 2
116289: RNCC: D | RNVC: 9

24 Aug 1991

3040-01-344-1980
Rigid Connecting Link

013441980
68A733037-2007: RNCC: 3 | RNVC: 2
68A733037-2005: RNCC: 3 | RNVC: 2
68A733037-2005: RNCC: 5 | RNVC: 2
68A733037-2005: RNCC: 5 | RNVC: 9
68A733037-2005: RNCC: 5 | RNVC: 9
68A733037-2005: RNCC: 5 | RNVC: 9
68A733037-2005: RNCC: 5 | RNVC: 9
68A733037-2005: RNCC: 5 | RNVC: 9
68A733037: RNCC: D | RNVC: 9

24 Aug 1991

3040-01-344-6397
Straight Shaft

013446397
12925: RNCC: 3 | RNVC: 2
11KP437: RNCC: 5 | RNVC: 2
12925-G: RNCC: 5 | RNVC: 9
11KP437: RNCC: 5 | RNVC: 9

4 Sep 1991

3040-01-345-5699
Shouldered Shaft

013455699
803-5773913 PC 17: RNCC: 3 | RNVC: 2
803-5184146 PC 40: RNCC: 3 | RNVC: 2
803-5184144 PC 20: RNCC: 5 | RNVC: 2
803-5184146 PIE: RNCC: C | RNVC: 1
803-5773913: RNCC: D | RNVC: 9
803-5184146: RNCC: D | RNVC: 9

21 Sep 1991

3040-01-346-1761
Shouldered Shaft

013461761
SA75450508: RNCC: 3 | RNVC: 2
2GK536: RNCC: 5 | RNVC: 2
2GK536: RNCC: 5 | RNVC: 9

28 Sep 1991

3040-01-346-1969
Bell Crank

013461969
KG11493: RNCC: 3 | RNVC: 2
C-160A: RNCC: 5 | RNVC: 2

28 Sep 1991

3040-01-347-2893
Pawl

013472893
5C1-02052: RNCC: 3 | RNVC: 2

19 Oct 1991

3040-01-347-2888
Rotating Shaft Eye Bracket

013472888
12370810: RNCC: 3 | RNVC: 2

19 Oct 1991

3040-01-348-4523
Spur Gearshaft

013484523
6211-700Z: RNCC: 3 | RNVC: 2
3040PL0813124: RNCC: 6 | RNVC: 9

9 Nov 1991

3040-01-347-8691
Piston Rod Guide

013478691
CEC-4-5222: RNCC: 3 | RNVC: 2
41-030: RNCC: 5 | RNVC: 2

30 Oct 1991

3040-01-348-5700
Piston Rod Guide

013485700
784704-1: RNCC: 3 | RNVC: 2
784704: RNCC: D | RNVC: 9

13 Nov 1991

3040-01-348-8023
Shouldered Shaft

013488023
11-39MIL1-2006-16: RNCC: 3 | RNVC: 9
11-39MIL1-2006-15: RNCC: 5 | RNVC: 2
5-227 ITEM 15 11-39MIL1-2006: RNCC: 5 | RNVC: 2
11-39MIL1-2006-15: RNCC: 5 | RNVC: 9
5-227: RNCC: D | RNVC: 9

16 Nov 1991

3040-01-346-4006
Straight Shaft

013464006
8751: RNCC: 3 | RNVC: 9
8751: RNCC: 5 | RNVC: 2
8751: RNCC: C | RNVC: 1

4 Oct 1991

3040-01-349-6927
Inertia Damper

013496927
12479785: RNCC: 1 | RNVC: 2
12426: RNCC: 3 | RNVC: 2
1242600: RNCC: 5 | RNVC: 2
12426: RNCC: 5 | RNVC: 9
12426: RNCC: 5 | RNVC: 9
12426: RNCC: 5 | RNVC: 9
1242600: RNCC: 5 | RNVC: 9
1242600: RNCC: 5 | RNVC: 9

2 Dec 1991

3040-01-351-6031
Rigid Connecting Link

013516031
B509144: RNCC: 3 | RNVC: 2
B509144: RNCC: 5 | RNVC: 2
B509144: RNCC: 5 | RNVC: 9

11 Jan 1992

3040-01-352-0013
Straight Shaft

013520013
3152728: RNCC: 3 | RNVC: 2
783240: RNCC: 5 | RNVC: 2
783240: RNCC: 5 | RNVC: 9

17 Jan 1992

Load More Results