What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 119 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 119 of 300

3040-01-370-2823
Piston Ring

013702823
1952-1.410-625-080: RNCC: 3 | RNVC: 2
7-753-000173: RNCC: 5 | RNVC: 2
7-753-000173: RNCC: 5 | RNVC: 2
7-753-000173: RNCC: 5 | RNVC: 2
7-753-000173: RNCC: 5 | RNVC: 9

17 Jan 1993

3040-01-370-2843
Straight Shaft

013702843
6-810-002180: RNCC: 3 | RNVC: 2
6-810-002180: RNCC: 5 | RNVC: 2
6-810-002180: RNCC: 5 | RNVC: 2

17 Jan 1993

3040-01-370-4125
Hub Clamp

013704125
A15492: RNCC: 3 | RNVC: 9
10-1631 PIECE 45: RNCC: 5 | RNVC: 9
10-1644 PIECE 45: RNCC: 5 | RNVC: 9
3040PL1288785: RNCC: 6 | RNVC: 9

21 Jan 1993

3040-01-371-2648
Friction Lining

013712648
N1000: RNCC: 3 | RNVC: 9
N1000: RNCC: 5 | RNVC: 2
406700 ITEM P: RNCC: 5 | RNVC: 2
406700: RNCC: 5 | RNVC: 2

9 Feb 1993

3040-01-372-4236
Rigid Connecting Link

013724236
209-062-759-111: RNCC: 3 | RNVC: 2

10 Mar 1993

3040-01-372-4889
Piston Ring

013724889
687518: RNCC: 3 | RNVC: 9
687518: RNCC: C | RNVC: 1

11 Mar 1993

3040-01-372-5552
Spur Gearshaft

013725552
50370-0429: RNCC: 3 | RNVC: 9
01070-0279 LOC 8-1: RNCC: 5 | RNVC: 2
01070-0279: RNCC: D | RNVC: 9

12 Mar 1993

3040-01-372-5309
Control Cam

013725309
830724: RNCC: 3 | RNVC: 2
830724: RNCC: 5 | RNVC: 2
830724: RNCC: 5 | RNVC: 9

12 Mar 1993

3040-01-374-0127
Spur Gearshaft

013740127
8348302: RNCC: 3 | RNVC: 2

14 Apr 1993

3040-01-374-1253
Transmission Sleeve

013741253
8644485-01: RNCC: 3 | RNVC: 2

16 Apr 1993

3040-01-373-9299
Electrical-Fluid Pressure Connector Assembly

013739299
E135850-3: RNCC: 3 | RNVC: 2

13 Apr 1993

3040-01-376-3215
Linear Actuating Cylinder

013763215
007-0080-03-0: RNCC: 3 | RNVC: 2
007-0080-00: RNCC: 5 | RNVC: 9
007-0080-01: RNCC: 5 | RNVC: 9

29 May 1993

3040-01-376-2161
Linear Actuating Cylinder Assembly

013762161
A-82004: RNCC: 3 | RNVC: 9
1378AS291-1: RNCC: 5 | RNVC: 2
1378AS291-1: RNCC: 7 | RNVC: 2
1378AS291: RNCC: 7 | RNVC: 2

28 May 1993

3040-01-377-2855
Straight Shaft

013772855
5361663 ITEM 43: RNCC: 3 | RNVC: 2
5361663: RNCC: D | RNVC: 9

12 Jul 1993

3040-01-377-2853
Shouldered Shaft

013772853
5361663 ITEM 48: RNCC: 3 | RNVC: 2
5361663: RNCC: D | RNVC: 9

12 Jul 1993

3040-01-379-2104
Linear Actuating Cylinder Assembly

013792104
B-WK-774-24 ITEM 2: RNCC: 3 | RNVC: 2
B-WK-774-24 ITEM 2: RNCC: 3 | RNVC: 9
2.50BBMTVS14X6.00: RNCC: 5 | RNVC: 9
D-WK-774-26 ITEM 41: RNCC: C | RNVC: 1
B-WK-774-24: RNCC: D | RNVC: 9

29 Aug 1993

3040-01-379-9063
Control Cam

013799063
12380361: RNCC: 3 | RNVC: 2

10 Sep 1993

3040-01-379-5891
Remote Control Lever

013795891
4081055: RNCC: 3 | RNVC: 2
3040PL0669216: RNCC: 6 | RNVC: 9
4075665: RNCC: E | RNVC: 8

3 Sep 1993

3040-01-378-5920
Shouldered Shaft

013785920
70351-28204-042: RNCC: 3 | RNVC: 2
70351-28204: RNCC: D | RNVC: 9

21 Aug 1993

3040-01-381-4461
Shouldered Shaft

013814461
6545C213-1: RNCC: 3 | RNVC: 2
6545C213-1: RNCC: 3 | RNVC: 2
6545C213: RNCC: D | RNVC: 9

15 Oct 1993

3040-01-382-2814
Spline Adapter

013822814
1593588-9: RNCC: 3 | RNVC: 2
7-311B11134-3: RNCC: 3 | RNVC: 2
94-31300-01: RNCC: 5 | RNVC: 2
1588848-1: RNCC: 5 | RNVC: 9
1593588-9: RNCC: 5 | RNVC: 9
7-311811134-3: RNCC: 5 | RNVC: 9
7-311B11134-3: RNCC: 5 | RNVC: 9
7-311B11134: RNCC: C | RNVC: 1

29 Oct 1993

3040-01-381-6012
Compressor Stat * Arm

013816012
4081057: RNCC: 3 | RNVC: 2
3040PL0868199: RNCC: 6 | RNVC: 9

20 Oct 1993

3040-01-383-5699
Remote Control Lever

013835699
200079-701: RNCC: 3 | RNVC: 2
200079-701: RNCC: 3 | RNVC: 9
200079-701: RNCC: 5 | RNVC: 9
200079-001: RNCC: 5 | RNVC: 9
CC-200079-701: RNCC: 5 | RNVC: 9
200000 PIECE 9.2: RNCC: 5 | RNVC: 9
200100 PIECE 9.2: RNCC: 5 | RNVC: 9
200079: RNCC: 5 | RNVC: 9

25 Nov 1993

3040-01-383-6321
Flexible Coupling Hub

013836321
246652: RNCC: 3 | RNVC: 2
1215712: RNCC: 5 | RNVC: 9
505950: RNCC: D | RNVC: 9

26 Nov 1993

3040-01-384-1013
Shouldered Shaft

013841013
2499844: RNCC: 3 | RNVC: 2
2499844: RNCC: 3 | RNVC: 9
2499844: RNCC: 5 | RNVC: 9

8 Dec 1993

3040-01-386-3308
Grease Cap

013863308
XB-06677: RNCC: 3 | RNVC: 2
5KK413: RNCC: 5 | RNVC: 2

3 Feb 1994

3040-01-386-3421
Linear Actuating Cylinder Assembly

013863421
SKB161805: RNCC: 3 | RNVC: 2
5.00CBB-2ATVS14CX12.50: RNCC: 5 | RNVC: 9
AG170572B: RNCC: C | RNVC: 1

3 Feb 1994

3040-01-385-8986
Straight Shaft

013858986
210368: RNCC: 3 | RNVC: 2
210368: RNCC: 5 | RNVC: 2

21 Jan 1994

3040-01-384-9010
Manual Control Lever

013849010
3315572: RNCC: 3 | RNVC: 2
3311315-1 ITEM 34: RNCC: 5 | RNVC: 2
3315572-1: RNCC: 5 | RNVC: 2
3315572: RNCC: 5 | RNVC: 9
3311315-1 ITEM 34: RNCC: 5 | RNVC: 9
3311315: RNCC: D | RNVC: 9

23 Dec 1993

3040-01-386-8278
Counterbalance Weight

013868278
032622016LD: RNCC: 3 | RNVC: 2
32622-16LD: RNCC: 3 | RNVC: 9
801624-535-31G: RNCC: 5 | RNVC: 2
32622-016-LD: RNCC: 5 | RNVC: 9
801624-535-31G: RNCC: 5 | RNVC: 9
801625-545-31G: RNCC: 5 | RNVC: 9
801626-521-31G: RNCC: 5 | RNVC: 9
32622-16LD: RNCC: C | RNVC: 1
801625-545-31G: RNCC: C | RNVC: 1
801626-521-31G: RNCC: C | RNVC: 1

16 Feb 1994

3040-01-386-8338
Linear Actuating Cylinder Assembly

013868338
81614: RNCC: 3 | RNVC: 2

16 Feb 1994

3040-01-387-3984
Straight Shaft

013873984
12415895: RNCC: 3 | RNVC: 2
12415895: RNCC: 5 | RNVC: 2
12415895: RNCC: 5 | RNVC: 2
12415895: RNCC: 5 | RNVC: 2

4 Mar 1994

3040-01-387-7261
Flexible Shaft Assembly Core

013877261
57353-89: RNCC: 3 | RNVC: 2
57353-89: RNCC: 5 | RNVC: 2

10 Mar 1994

3040-01-388-4757
Linear Actuating Cylinder Cap

013884757
22443: RNCC: 3 | RNVC: 2

31 Mar 1994

3040-01-389-7823
Linear Actuating Cylinder Assembly

013897823
35592435: RNCC: 3 | RNVC: 2
CV153277: RNCC: 5 | RNVC: 2
35592435: RNCC: 5 | RNVC: 2
35592435: RNCC: 5 | RNVC: 2
35592435: RNCC: C | RNVC: 1
D-19840-A: RNCC: C | RNVC: 1

3 May 1994

3040-01-390-0986
Nonrotating Shaft Eye Bracket

013900986
1819958: RNCC: 3 | RNVC: 2
1819958: RNCC: 5 | RNVC: 2
1819958: RNCC: 5 | RNVC: 9

11 May 1994

3040-01-389-9592
Remote Control Lever

013899592
714250-61500: RNCC: 3 | RNVC: 9
714250-61500: RNCC: 5 | RNVC: 2
714250-61500: RNCC: C | RNVC: 1

8 May 1994

3040-01-393-5325
Linear Actuating Cylinder Assembly

013935325
2.50C-2AU39AC4: RNCC: 3 | RNVC: 2

21 Jul 1994

3040-01-394-5060
Ball Joint

013945060
H169920: RNCC: 3 | RNVC: 2

9 Aug 1994

3040-01-395-6216
Rigid Connecting Link

013956216
4067040: RNCC: 3 | RNVC: 2
4067040: RNCC: 5 | RNVC: 2

1 Sep 1994

3040-01-396-1971
Hub Clamp

013961971
820-5295154 PC T106A: RNCC: 3 | RNVC: 2
820-5295960PC6A: RNCC: 5 | RNVC: 9
820-5295154PCT106A: RNCC: 5 | RNVC: 9
820-5295154: RNCC: D | RNVC: 9
820-5295960: RNCC: D | RNVC: 9

14 Sep 1994

3040-01-397-5274
Rigid Connecting Link

013975274
4609-581: RNCC: 3 | RNVC: 2
17B9F1112-581: RNCC: 5 | RNVC: 2

13 Oct 1994

3040-01-396-9216
Control Cam

013969216
12063869-1: RNCC: 3 | RNVC: 2

29 Sep 1994

3040-01-398-6499
Control Cam

013986499
707214-13: RNCC: 3 | RNVC: 2
707214-13: RNCC: D | RNVC: 9

7 Nov 1994

3040-01-398-4565
Rigid Connecting Link

013984565
A047640: RNCC: 3 | RNVC: 2
A047640: RNCC: 5 | RNVC: 2
A047640: RNCC: 5 | RNVC: 9
A47640: RNCC: C | RNVC: 1

3 Nov 1994

3040-01-399-0979
Manual Control Lever

013990979
PDG8332: RNCC: 3 | RNVC: 2
PDG8332: RNCC: 5 | RNVC: 2

16 Nov 1994

3040-01-400-3188
Shouldered Shaft

014003188
16606829: RNCC: 3 | RNVC: 2
16606829: RNCC: 3 | RNVC: 9
3283042-17: RNCC: 5 | RNVC: 2
A4578AFB9-17: RNCC: 5 | RNVC: 9

14 Dec 1994

3040-01-400-6060
Shouldered Shaft

014006060
056652: RNCC: 3 | RNVC: 2

16 Dec 1994

3040-01-406-3930
Shaft Retaining Plate

014063930
12416450: RNCC: 3 | RNVC: 2
12416450: RNCC: 3 | RNVC: 2
12416450: RNCC: 5 | RNVC: 2

3 Jan 1995

3040-01-406-7342
Rigid Connecting Link

014067342
68A413042-1001: RNCC: 3 | RNVC: 2

11 Jan 1995

3040-01-407-1313
Spur Gearshaft

014071313
104251: RNCC: 3 | RNVC: 2

21 Jan 1995

3040-01-408-1012
Housing Adapter

014081012
29513126: RNCC: 3 | RNVC: 2
29513126: RNCC: 5 | RNVC: 2
29513126: RNCC: 5 | RNVC: 2

10 Feb 1995

3040-01-408-6662
Rotating Shaft Eye Bracket

014086662
64A90C257-1: RNCC: 3 | RNVC: 2

23 Feb 1995

3040-01-409-0104
Shaft Collar

014090104
2C100: RNCC: 3 | RNVC: 2
15130: RNCC: 3 | RNVC: 2
1709AS938-01: RNCC: 5 | RNVC: 2
1709AS938: RNCC: 7 | RNVC: 2

3 Mar 1995

NSN 3040-01-409-2501 014092501 CONNECTING LINK,RIGID

3040-01-409-2501
Rigid Connecting Link

014092501
12460067: RNCC: 3 | RNVC: 2
12460067: RNCC: 5 | RNVC: 2
6003057: RNCC: 5 | RNVC: 9
3040014092501: RNCC: 6 | RNVC: 9
5342PL0769126: RNCC: 6 | RNVC: 9

8 Mar 1995

3040-01-409-0018
Shaft Collar

014090018
011-601003-001: RNCC: 3 | RNVC: 2
011-601003-001: RNCC: 5 | RNVC: 2
011-601003-001: RNCC: 5 | RNVC: 2

3 Mar 1995

3040-01-411-2792
Shouldered Shaft

014112792
27660: RNCC: 3 | RNVC: 2
76516PC116: RNCC: 5 | RNVC: 9
30CT93-114 REF3 PC116: RNCC: 5 | RNVC: 9
27660: RNCC: C | RNVC: 1

21 Mar 1995

3040-01-412-6778
Control Cam

014126778
3037-569: RNCC: 3 | RNVC: 2
3037-569: RNCC: 5 | RNVC: 2
3037-569: RNCC: 5 | RNVC: 2

26 Apr 1995

3040-01-412-7607
Spline Adapter

014127607
A15PS257-8: RNCC: 1 | RNVC: 2
118041-8: RNCC: 3 | RNVC: 2
118041-8: RNCC: 5 | RNVC: 9
118041: RNCC: D | RNVC: 9
A15PS257: RNCC: D | RNVC: 9

27 Apr 1995

3040-01-413-3678
Rigid Connecting Link

014133678
638031006: RNCC: 3 | RNVC: 2
31006: RNCC: 5 | RNVC: 9

12 May 1995

3040-01-413-3829
Body Hub

014133829
13160: RNCC: 3 | RNVC: 2
13160: RNCC: 3 | RNVC: 2
13160: RNCC: 5 | RNVC: 2
13160: RNCC: 5 | RNVC: 2
D007K226: RNCC: 7 | RNVC: 2

12 May 1995

3040-01-414-0342
Housing Adapter

014140342
1002450: RNCC: 3 | RNVC: 2

30 May 1995

3040-01-416-6844
Shouldered Shaft

014166844
3119591-1: RNCC: 3 | RNVC: 2
3119591: RNCC: D | RNVC: 9

24 Jul 1995

3040-01-417-2418
Extension Shaft

014172418
400-11074-1: RNCC: 3 | RNVC: 2

3 Aug 1995

3040-01-417-6197
Remote Control Lever

014176197
123AMM60103-1: RNCC: 3 | RNVC: 2
123AMM60103-1: RNCC: 5 | RNVC: 9

10 Aug 1995

3040-01-417-5917
Manual Control Lever

014175917
526267 REV: RNCC: 3 | RNVC: 2
526267: RNCC: 5 | RNVC: 9
SH-10190 DET 3: RNCC: 5 | RNVC: 9
536267(REV): RNCC: C | RNVC: 1

10 Aug 1995

3040-01-417-8462
Shouldered Shaft

014178462
21214-1003-1: RNCC: 3 | RNVC: 2
21214-9: RNCC: 5 | RNVC: 9
21214: RNCC: D | RNVC: 9

16 Aug 1995

3040-01-418-3533
Linear Actuating Cylinder

014183533
NCGUN40-0550: RNCC: 3 | RNVC: 2
NCGUN40-0550: RNCC: 5 | RNVC: 2
254787: RNCC: 7 | RNVC: 2

24 Aug 1995

3040-01-419-0522
Shouldered Shaft

014190522
21217-1001-1: RNCC: 3 | RNVC: 2
21217-10: RNCC: 5 | RNVC: 9
21217: RNCC: D | RNVC: 9

12 Sep 1995

3040-01-418-4271
Control Cam

014184271
211057901: RNCC: 3 | RNVC: 2
801-6408789 FIND 2: RNCC: 5 | RNVC: 2
6408789: RNCC: D | RNVC: 9

25 Aug 1995

3040-01-420-1162
Shouldered Shaft

014201162
211054438: RNCC: 3 | RNVC: 2
512-6408431-7: RNCC: 5 | RNVC: 2
6404873-14: RNCC: 5 | RNVC: 2
DF-6501-71-FN14: RNCC: 5 | RNVC: 9
DF6501-69 FN 7: RNCC: 5 | RNVC: 9
6408431: RNCC: D | RNVC: 9
6404873: RNCC: D | RNVC: 9

6 Oct 1995

3040-01-420-5667
Ball Joint

014205667
11-0801: RNCC: 3 | RNVC: 2
1905AS152-1: RNCC: 5 | RNVC: 2
1905AS152-1: RNCC: 5 | RNVC: 2
1905AS152-1: RNCC: 5 | RNVC: 9
1905AS152: RNCC: 7 | RNVC: 1

19 Oct 1995

3040-01-420-8443
Thrust Bearing Shoe

014208443
471007-3: RNCC: 3 | RNVC: 2
11.12-1007-3: RNCC: 5 | RNVC: 2

26 Oct 1995

3040-01-420-8286
Nonrotating Shaft Eye Bracket

014208286
M24560/8-015: RNCC: 2 | RNVC: 2
MIL-L-24560/8: RNCC: 4 | RNVC: 1

26 Oct 1995

3040-01-420-2570
Linear Actuating Cylinder Assembly

014202570
NWW36347: RNCC: 3 | RNVC: 2
NW36347: RNCC: 3 | RNVC: 2
SPD-6294: RNCC: 5 | RNVC: 2

12 Oct 1995

3040-01-420-8528
Manual Control Lever

014208528
2584600: RNCC: 3 | RNVC: 2
2584600: RNCC: 5 | RNVC: 2

26 Oct 1995

3040-01-421-4631
Shaft Retaining Plate

014214631
SS800R-12: RNCC: 3 | RNVC: 2
SS800R-12: RNCC: 5 | RNVC: 9

8 Nov 1995

3040-01-422-3181
Anti-Torque Arm

014223181
34432: RNCC: 3 | RNVC: 2

29 Nov 1995

3040-01-423-0990
Pivot Shaft Assembly

014230990
111-63690: RNCC: 3 | RNVC: 2
63690: RNCC: 5 | RNVC: 2
63690: RNCC: 5 | RNVC: 9
111-63690: RNCC: 5 | RNVC: 9

15 Dec 1995

3040-01-431-7406
Flexible Shaft Assembly

014317406
B-400-22001-100-126: RNCC: 3 | RNVC: 2
B-800-22001-100-126: RNCC: 3 | RNVC: 2
22001-100 X 10FT 6IN.: RNCC: 3 | RNVC: 2
22001-100X126: RNCC: 3 | RNVC: 2
22001-100 X 10'6: RNCC: 5 | RNVC: 9
22001: RNCC: D | RNVC: 9

17 May 1996

3040-01-433-8280
Spur Gearshaft

014338280
654251: RNCC: 3 | RNVC: 2
654251: RNCC: 5 | RNVC: 9
654251: RNCC: D | RNVC: 9

11 Jul 1996

3040-01-434-0189
Rigid Connecting Link

014340189
1199-186-1: RNCC: 3 | RNVC: 2
PL1199-000-1 LINE NO. 13: RNCC: 5 | RNVC: 2
1199-000-1 FIND 11: RNCC: 5 | RNVC: 2
1199-000-1: RNCC: D | RNVC: 9

17 Jul 1996

3040-01-434-0324
Linear Actuating Cylinder Assembly

014340324
61650-048093: RNCC: 3 | RNVC: 2
3070AS557-1: RNCC: 7 | RNVC: 2

17 Jul 1996

3040-01-434-7041
Shouldered Shaft

014347041
6-55479: RNCC: 3 | RNVC: 2

5 Aug 1996

3040-01-434-3886
Bevel Gearshaft

014343886
6008T48P04: RNCC: 3 | RNVC: 2
6008T48P03: RNCC: 5 | RNVC: 9
6008T48: RNCC: D | RNVC: 9

29 Jul 1996

3040-01-435-0456
Rigid Connecting Link

014350456
209-031-180-101: RNCC: 3 | RNVC: 2
209-031-180: RNCC: D | RNVC: 9

13 Aug 1996

3040-01-435-1120
Control Cam

014351120
C18-09465: RNCC: 3 | RNVC: 2

14 Aug 1996

3040-01-435-1358
Pawl

014351358
4660895-002: RNCC: 3 | RNVC: 2
4660895-002: RNCC: 3 | RNVC: 9
4660895-002: RNCC: 5 | RNVC: 2
4660895: RNCC: 5 | RNVC: 9

15 Aug 1996

3040-01-436-0145
Shouldered Shaft

014360145
A-800-12526-0401: RNCC: 3 | RNVC: 2
12100-1: RNCC: 5 | RNVC: 1
12526: RNCC: D | RNVC: 9

9 Sep 1996

3040-01-435-6649
Remote Control Lever

014356649
1385M33G04: RNCC: 3 | RNVC: 2

29 Aug 1996

3040-01-425-4867
Straight Shaft

014254867
423H0520-1: RNCC: 3 | RNVC: 2

22 Feb 1996

3040-01-428-3081
Manual Control Lever

014283081
6-033-000978: RNCC: 3 | RNVC: 2
3643822: RNCC: 5 | RNVC: 2
3643822: RNCC: 5 | RNVC: 9

25 Mar 1996

3040-01-428-3152
Rigid Connecting Link

014283152
23-06088: RNCC: 3 | RNVC: 2
23-06088: RNCC: 3 | RNVC: 9
23-06088: RNCC: 5 | RNVC: 2
589-6953255 ITEM 4 REV C: RNCC: 5 | RNVC: 9
21-10130 ITEM 4: RNCC: 5 | RNVC: 9
589-6953259: RNCC: 5 | RNVC: 9

25 Mar 1996

3040-01-428-4435
Linear Actuating Cylinder Assembly

014284435
0260-0200-0130A: RNCC: 3 | RNVC: 2
23-0618: RNCC: 5 | RNVC: 2
0260-0200-0130A: RNCC: 5 | RNVC: 9

27 Mar 1996

3040-01-428-5714
Shouldered Shaft

014285714
029214-1: RNCC: 3 | RNVC: 2
029214-1: RNCC: 5 | RNVC: 9

28 Mar 1996

3040-01-428-7177
Straight Shaft

014287177
029287-1: RNCC: 3 | RNVC: 9
029287-1: RNCC: 5 | RNVC: 2

1 Apr 1996

3040-01-430-2233
Linear Actuating Cylinder Assembly

014302233
9752100992: RNCC: 3 | RNVC: 9
9752100992: RNCC: C | RNVC: 1

25 Apr 1996

3040-01-429-1274
Shouldered Shaft

014291274
10T01301-0001: RNCC: 3 | RNVC: 9
15A00403-0000-61: RNCC: 5 | RNVC: 9
10T01301-0001: RNCC: C | RNVC: 1

5 Apr 1996

3040-01-430-2722
Rigid Connecting Link

014302722
3799074-1: RNCC: 3 | RNVC: 2
3338411-11: RNCC: 5 | RNVC: 9

25 Apr 1996

3040-01-430-4153
Shouldered Shaft

014304153
7-0111-01: RNCC: 3 | RNVC: 2
7011-1: RNCC: D | RNVC: 9

29 Apr 1996

3040-01-432-0166
Flexible Shaft Assembly

014320166
B-400-22001-100-186IN: RNCC: 3 | RNVC: 2
22001-100-15FTX6IN: RNCC: 5 | RNVC: 9
B-400-22001-100-186: RNCC: 5 | RNVC: 9
B-800-22001-100-186: RNCC: 5 | RNVC: 9
22001-100 X 15'6: RNCC: 5 | RNVC: 9
22001-100 X 186: RNCC: C | RNVC: 1
22001-100 X 15': RNCC: C | RNVC: 1
22001: RNCC: D | RNVC: 9

23 May 1996

3040-01-436-0299
Rigid Connecting Link

014360299
209-001-072-101: RNCC: 3 | RNVC: 2
209-001-072: RNCC: D | RNVC: 9

10 Sep 1996

3040-01-436-5642
Piston Ring

014365642
53775-005030: RNCC: 3 | RNVC: 2

23 Sep 1996

3040-01-436-6152
Shouldered Shaft

014366152
029220-1: RNCC: 3 | RNVC: 2
029220-1: RNCC: 5 | RNVC: 9
029220-1: RNCC: C | RNVC: 1
029220: RNCC: D | RNVC: 9

24 Sep 1996

3040-01-437-3957
Body Hub

014373957
029564-1: RNCC: 3 | RNVC: 2
029564-1: RNCC: 5 | RNVC: 9
029564-1: RNCC: C | RNVC: 1
029564: RNCC: D | RNVC: 9

11 Oct 1996

3040-01-438-0383
Linear Actuating Cylinder Assembly

014380383
1.50BB3LLT14A14.50: RNCC: 3 | RNVC: 9
1.5-AO-NPIN-14.5-11-S-1500: RNCC: 5 | RNVC: 2
7132-1: RNCC: 5 | RNVC: 9
7132: RNCC: 7 | RNVC: 9

29 Oct 1996

3040-01-438-6085
Manual Control Lever

014386085
4474-067: RNCC: 3 | RNVC: 2
9988-862 ITEM 7.1: RNCC: 5 | RNVC: 2
2349-055: RNCC: C | RNVC: 1
9988-862: RNCC: D | RNVC: 9

13 Nov 1996

3040-01-438-0200
Manual Control Lever Assembly

014380200
211074129: RNCC: 3 | RNVC: 2
561-6404326-AY99: RNCC: 5 | RNVC: 2
DF2018-471-AY99: RNCC: 5 | RNVC: 9
6404326: RNCC: D | RNVC: 9

29 Oct 1996

3040-01-438-6187
Shouldered Shaft Assembly

014386187
3131602: RNCC: 3 | RNVC: 2

13 Nov 1996

3040-01-439-0939
Control Cam

014390939
B11841-1: RNCC: 3 | RNVC: 2
B11443-3 ITEM 03: RNCC: 5 | RNVC: 2
B11841-1: RNCC: 5 | RNVC: 9
B11443-3 ITEM 03: RNCC: 5 | RNVC: 9

27 Nov 1996

3040-01-439-4675
Grease Cap

014394675
1098K12: RNCC: 3 | RNVC: 2
4002776: RNCC: 7 | RNVC: 2

9 Dec 1996

3040-01-439-8599
Housing Adapter

014398599
C3191: RNCC: 3 | RNVC: 2
C3191: RNCC: 5 | RNVC: 9

20 Dec 1996

3040-01-440-5669
Breather

014405669
DC-2: RNCC: 3 | RNVC: 2
92239641: RNCC: 5 | RNVC: 2
738042: RNCC: 5 | RNVC: 2

16 Jan 1997

3040-01-442-4497
Straight Shaft

014424497
12415812: RNCC: 3 | RNVC: 2
12415812: RNCC: 5 | RNVC: 2
12415812: RNCC: 5 | RNVC: 2

14 Mar 1997

3040-01-443-0651
Extension Shaft

014430651
05135D: RNCC: 3 | RNVC: 2

31 Mar 1997

3040-01-444-8837
Shaft Retaining Plate

014448837
65720-35625-119: RNCC: 3 | RNVC: 2

19 May 1997

3040-01-446-6359
Straight Shaft

014466359
123-4556116 PART 11: RNCC: 3 | RNVC: 2
123-4403533 PART 20: RNCC: 3 | RNVC: 2
123-4403525 PART 20: RNCC: 5 | RNVC: 9
123-4403527 PART 11: RNCC: 5 | RNVC: 9
123-4403533 PART 20: RNCC: 5 | RNVC: 9
1502-77: RNCC: D | RNVC: 9
1502-128: RNCC: D | RNVC: 9
4556116: RNCC: D | RNVC: 9
4403533: RNCC: D | RNVC: 9

11 Jul 1997

3040-01-446-4689
Brake Drum

014464689
0311-860730: RNCC: 3 | RNVC: 2
AIN-0311 860744: RNCC: 5 | RNVC: 2
AIN/0311 860730: RNCC: 5 | RNVC: 9

3 Jul 1997

3040-01-447-6108
Shouldered Shaft

014476108
21140-1003-1: RNCC: 3 | RNVC: 2
21140-9: RNCC: 5 | RNVC: 9
21140: RNCC: D | RNVC: 9

11 Aug 1997

3040-01-449-9986
Linear Actuating Cylinder Piston

014499986
211045125: RNCC: 3 | RNVC: 2
512-6404652-AY96: RNCC: 5 | RNVC: 2
DF6503-173 ASSY 96: RNCC: 5 | RNVC: 9
DF6503-173: RNCC: D | RNVC: 9
6404652: RNCC: D | RNVC: 9

23 Oct 1997

3040-01-451-8586
Linear Actuating Cylinder Piston Rod

014518586
143-3992: RNCC: 3 | RNVC: 9

7 Jan 1998

3040-01-452-1728
Differential Spider

014521728
H306-232: RNCC: 3 | RNVC: 2
N5691 PC 20: RNCC: 5 | RNVC: 2
N5691: RNCC: D | RNVC: 9

20 Jan 1998

3040-01-453-0974
Shouldered Shaft

014530974
6532B378-1: RNCC: 3 | RNVC: 2
6532B378: RNCC: D | RNVC: 9

19 Feb 1998

3040-01-454-4002
Rigid Connecting Link

014544002
74A501730-1003: RNCC: 3 | RNVC: 2
74A501730-1001: RNCC: 5 | RNVC: 9
74A501730-1001: RNCC: 5 | RNVC: 9

30 Mar 1998

3040-01-454-6055
Shaft Collar

014546055
7578996-001: RNCC: 3 | RNVC: 2
7578996-001: RNCC: 3 | RNVC: 2
7578996-001: RNCC: 5 | RNVC: 2

7 Apr 1998

3040-01-455-2621
Rigid Connecting Link

014552621
74A172200-1003: RNCC: 3 | RNVC: 2

27 Apr 1998

3040-01-454-5037
Rigid Connecting Link

014545037
74A675230-1001: RNCC: 3 | RNVC: 2
74A675230-1001: RNCC: 5 | RNVC: 9

2 Apr 1998

3040-01-455-2623
Rigid Connecting Link

014552623
74A172201-1003: RNCC: 3 | RNVC: 2

27 Apr 1998

3040-01-455-3602
Rigid Connecting Link

014553602
74A400561-1005: RNCC: 3 | RNVC: 2
74A400561-1005: RNCC: 5 | RNVC: 9

30 Apr 1998

3040-01-456-0773
Retraction Stud

014560773
693-10312-1: RNCC: 3 | RNVC: 2

29 May 1998

3040-01-456-4450
Piston Rod Guide

014564450
21301-1001-2: RNCC: 3 | RNVC: 2
21338 FIND 17: RNCC: 5 | RNVC: 9
21301-1001: RNCC: D | RNVC: 9

12 Jun 1998

3040-01-456-6724
Push-Pull Control Assembly

014566724
CCX63325: RNCC: 3 | RNVC: 2
CCX63325: RNCC: 5 | RNVC: 2
316832-003-0300.0: RNCC: 5 | RNVC: 2
301947-003-300: RNCC: 5 | RNVC: 9
301947-003-25FT: RNCC: 5 | RNVC: 9
301947-003-300: RNCC: 5 | RNVC: 9
301947-003-25FT: RNCC: 5 | RNVC: 9
301947-003-25FT: RNCC: 5 | RNVC: 9

22 Jun 1998

3040-01-457-3032
Body Hub

014573032
5-16-7107-00-01G: RNCC: 3 | RNVC: 2

18 Jul 1998

3040-01-318-0220
Control Cam

013180220
4477-050: RNCC: 3 | RNVC: 2
4477-050: RNCC: 5 | RNVC: 2

11 Apr 1990

3040-01-317-4497
Shouldered Shaft

013174497
055365: RNCC: 3 | RNVC: 2
933B055365: RNCC: 5 | RNVC: 9

30 Mar 1990

3040-01-318-1383
Manual Control Lever

013181383
396775: RNCC: 3 | RNVC: 2

13 Apr 1990

3040-01-319-0498
Counterbalance Weight

013190498
4071745: RNCC: 3 | RNVC: 2

30 Apr 1990

3040-01-320-0798
Control Cam

013200798
2677390: RNCC: 3 | RNVC: 2

18 May 1990

3040-01-320-8275
Straight Shaft

013208275
084756: RNCC: 3 | RNVC: 9
084756: RNCC: 5 | RNVC: 2
L566/45 L705/86AITEM-22: RNCC: 5 | RNVC: 9
52120: RNCC: 5 | RNVC: 9
84756: RNCC: 5 | RNVC: 9
RE8/18: RNCC: 5 | RNVC: 9
L566/50 ITEM-20: RNCC: 5 | RNVC: 9
084756: RNCC: 5 | RNVC: 9

4 Jun 1990

3040-01-319-6966
Shouldered Shaft

013196966
2144800-2: RNCC: 3 | RNVC: 2
2144800: RNCC: D | RNVC: 9

12 May 1990

3040-01-319-9506
Control Cam

013199506
2111007-207: RNCC: 3 | RNVC: 2

17 May 1990

3040-01-321-5034
Shouldered Shaft

013215034
4071013: RNCC: 3 | RNVC: 2
4071013: RNCC: 5 | RNVC: 2
3040PL0668997: RNCC: 6 | RNVC: 9

19 Jun 1990

3040-01-321-9972
Shouldered Shaft

013219972
5544241: RNCC: 3 | RNVC: 2
5544241: RNCC: 5 | RNVC: 2

27 Jun 1990

3040-01-322-6305
Control Cam

013226305
3037-844: RNCC: 3 | RNVC: 2

11 Jul 1990

3040-01-322-3430
Shouldered Shaft

013223430
5544216: RNCC: 3 | RNVC: 2
5544216: RNCC: 5 | RNVC: 2

3 Jul 1990

3040-01-323-0001
Remote Control Lever

013230001
9340M85P01: RNCC: 3 | RNVC: 2

18 Jul 1990

3040-01-325-2152
Linear Actuating Cylinder Piston

013252152
1211335-205: RNCC: 3 | RNVC: 2

30 Aug 1990

3040-01-325-6349
Rigid Connecting Link

013256349
4J11072-105B: RNCC: 3 | RNVC: 2
4J11072-105A: RNCC: 5 | RNVC: 9

7 Sep 1990

3040-01-325-9178
Spur Gearshaft

013259178
10029042: RNCC: 3 | RNVC: 2

13 Sep 1990

3040-01-326-4620
Nonrotating Shaft Eye Bracket

013264620
50-0024: RNCC: 3 | RNVC: 2

25 Sep 1990

3040-01-326-9710
Shouldered Shaft

013269710
754616: RNCC: 3 | RNVC: 2

4 Oct 1990

3040-01-328-2121
Straight Shaft

013282121
A-18559: RNCC: 3 | RNVC: 2

29 Oct 1990

3040-01-327-5250
Hub Clamp

013275250
2044139-1: RNCC: 3 | RNVC: 2
2044139: RNCC: D | RNVC: 9

16 Oct 1990

3040-01-332-0789
Remote Control Lever

013320789
8984115: RNCC: 3 | RNVC: 2
8984115: RNCC: 5 | RNVC: 2
8984115: RNCC: 5 | RNVC: 9

3 Jan 1991

3040-01-332-1632
Control Cam

013321632
8984111-3: RNCC: 3 | RNVC: 2
10107032: RNCC: 6 | RNVC: 9

5 Jan 1991

3040-01-332-3925
Remote Control Lever

013323925
68A831328-1002: RNCC: 3 | RNVC: 2

10 Jan 1991

3040-01-332-5490
Spur Sector Gearshaft

013325490
HFB644100A10397: RNCC: 3 | RNVC: 2

12 Jan 1991

3040-01-334-1210
Control Cam

013341210
116091-1: RNCC: 3 | RNVC: 2

15 Feb 1991

3040-01-334-5786
Straight Shaft

013345786
105835-1: RNCC: 3 | RNVC: 2
105835-1: RNCC: 5 | RNVC: 9

24 Feb 1991

3040-01-336-3612
Linear Actuating Cylinder Assembly

013363612
12916775: RNCC: 3 | RNVC: 2

24 Mar 1991

3040-01-337-4168
Linear Actuating Cylinder Piston

013374168
23017261: RNCC: 3 | RNVC: 2

14 Apr 1991

3040-01-337-0658
Bell Crank

013370658
5SE00985-1: RNCC: 3 | RNVC: 9
5SE00985: RNCC: D | RNVC: 9

9 Apr 1991

3040-01-339-1609
Control Cam

013391609
6545C075-1: RNCC: 3 | RNVC: 2
6545C075-1: RNCC: 5 | RNVC: 2
6545C075: RNCC: D | RNVC: 9

17 May 1991

3040-01-337-4377
Rotating Shaft Eye Bracket

013374377
24680: RNCC: 3 | RNVC: 1
24680VM: RNCC: 5 | RNVC: 2
24680-1: RNCC: C | RNVC: 1

14 Apr 1991

3040-01-340-0051
Rigid Connecting Link

013400051
20425: RNCC: 3 | RNVC: 1
20425VM: RNCC: 5 | RNVC: 2
6744060: RNCC: 5 | RNVC: 2

5 Jun 1991

3040-01-340-5911
Shouldered Shaft

013405911
70700-20130-128: RNCC: 3 | RNVC: 2

17 Jun 1991

3040-01-341-0107
Shouldered Axle

013410107
528150: RNCC: 3 | RNVC: 2
TM75114CA5-PG13 PC 36: RNCC: 5 | RNVC: 9
528150: RNCC: 5 | RNVC: 9
508413: RNCC: C | RNVC: 1

23 Jun 1991

3040-01-341-2465
Nonrotating Shaft Eye Bracket

013412465
516718: RNCC: 3 | RNVC: 2
TM75114CA5-PG12 PC 27: RNCC: 5 | RNVC: 9

26 Jun 1991

3040-01-341-0147
Counterbalance Weight

013410147
2301026: RNCC: 3 | RNVC: 2
AS44522-140: RNCC: 5 | RNVC: 2
AS44522-140: RNCC: 5 | RNVC: 9
AS44522-140: RNCC: 5 | RNVC: 9

23 Jun 1991

3040-01-341-8613
Control Cam

013418613
6546B028-1: RNCC: 3 | RNVC: 2
6546B028-1: RNCC: 5 | RNVC: 2
6546B028: RNCC: 5 | RNVC: 2

10 Jul 1991

3040-01-342-4803
Rigid Connecting Link

013424803
4071755: RNCC: 3 | RNVC: 2
4071756: RNCC: 5 | RNVC: 2
4071757: RNCC: 5 | RNVC: 2
4071759: RNCC: 5 | RNVC: 2
4071755: RNCC: 5 | RNVC: 2
4071759: RNCC: 5 | RNVC: 2
4071756: RNCC: 5 | RNVC: 2
4071757: RNCC: 5 | RNVC: 2
4071755: RNCC: 5 | RNVC: 9
4071756: RNCC: 5 | RNVC: 9

24 Jul 1991

3040-01-344-9230
Shouldered Shaft

013449230
E88220042: RNCC: 3 | RNVC: 2
SA88220042: RNCC: 3 | RNVC: 9
2GE537: RNCC: 5 | RNVC: 2
V88220042: RNCC: 5 | RNVC: 9
2GE537: RNCC: 5 | RNVC: 9
SA8820042: RNCC: 5 | RNVC: 9
V88220042: RNCC: 5 | RNVC: 9

8 Sep 1991

3040-01-345-3697
Counterbalance Weight

013453697
335-014-402-0: RNCC: 3 | RNVC: 2

18 Sep 1991

3040-01-345-8892
Linear Actuating Cylinder Piston

013458892
12344830: RNCC: 3 | RNVC: 2

24 Sep 1991

3040-01-346-1756
Straight Shaft

013461756
KR760200 PIECE 10: RNCC: 3 | RNVC: 2
KR516-10A: RNCC: 5 | RNVC: 2
KR520-10A: RNCC: C | RNVC: 1
KR760200: RNCC: D | RNVC: 9

28 Sep 1991

3040-01-346-3237
Remote Control Lever

013463237
18-17997-002: RNCC: 3 | RNVC: 2
18-17997: RNCC: D | RNVC: 9

3 Oct 1991

3040-01-346-9960
Pawl

013469960
5C1-02053: RNCC: 3 | RNVC: 2

12 Oct 1991

3040-01-347-2826
Hub Clamp

013472826
212752-1: RNCC: 3 | RNVC: 2

19 Oct 1991

3040-01-347-2827
Hub Clamp

013472827
CG3-9: RNCC: 3 | RNVC: 9
212752-2: RNCC: 5 | RNVC: 2
BKS-A1-2: RNCC: 5 | RNVC: 9
DL114: RNCC: 5 | RNVC: 9

19 Oct 1991

3040-01-347-2828
Straight Shaft

013472828
52219: RNCC: 3 | RNVC: 2
52219-G: RNCC: 5 | RNVC: 2
52219: RNCC: 5 | RNVC: 9

19 Oct 1991

3040-01-348-1359
Shouldered Shaft

013481359
6547C253-1: RNCC: 3 | RNVC: 2

5 Nov 1991

3040-01-348-1517
Piston Rod Ring

013481517
740369-21: RNCC: 3 | RNVC: 2

5 Nov 1991

3040-01-348-1631
Rotating Shaft Eye Bracket

013481631
799662-1: RNCC: 3 | RNVC: 2
799662: RNCC: D | RNVC: 9

5 Nov 1991

3040-01-348-4478
Manual Control Lever

013484478
3173837-2: RNCC: 3 | RNVC: 2
3173837: RNCC: 5 | RNVC: 2
3173837-2: RNCC: 5 | RNVC: 9

9 Nov 1991

3040-01-349-1972
Piston Rod Ring

013491972
1211345-225: RNCC: 3 | RNVC: 2
1211345-225-212: RNCC: 5 | RNVC: 2
S30775-212-P99: RNCC: 5 | RNVC: 2

22 Nov 1991

3040-01-348-9602
Control Cam

013489602
801-6404978 FIND 2: RNCC: 3 | RNVC: 2
211046389: RNCC: 5 | RNVC: 2
DF330655 FIND 2: RNCC: 5 | RNVC: 9
801-6404978: RNCC: D | RNVC: 9
6404978: RNCC: D | RNVC: 9

19 Nov 1991

3040-01-349-0614
Flexible Shaft Assembly

013490614
2853371-101: RNCC: 3 | RNVC: 2
2853371-101: RNCC: 3 | RNVC: 9

20 Nov 1991

3040-01-351-8197
Shouldered Shaft

013518197
8100-1251-0284 PC 107: RNCC: 3 | RNVC: 2
8100-1251-0284: RNCC: D | RNVC: 9

15 Jan 1992

3040-01-353-7642
Rigid Connecting Link

013537642
8100-1251-0192 PC141: RNCC: 3 | RNVC: 2
8100-1251-0192: RNCC: D | RNVC: 9

15 Feb 1992

3040-01-353-6265
Straight Shaft

013536265
6310189: RNCC: 3 | RNVC: 2
6310189: RNCC: 5 | RNVC: 2

13 Feb 1992

3040-01-353-8366
Shaft Retaining Plate

013538366
622220-1: RNCC: 3 | RNVC: 2
622220-1: RNCC: 5 | RNVC: 2
622220-1: RNCC: 5 | RNVC: 9
622220-1: RNCC: 5 | RNVC: 9
622220-1: RNCC: 5 | RNVC: 9

18 Feb 1992

3040-01-354-9950
Flexible Shaft Assembly Casing

013549950
612463-5L: RNCC: 3 | RNVC: 2

9 Mar 1992

3040-01-351-4480
Helical Gearshaft

013514480
362545: RNCC: 3 | RNVC: 2

9 Jan 1992

3040-01-351-1640
Linear Actuating Cylinder Cap

013511640
704-6294478-5: RNCC: 3 | RNVC: 2
704-6294478: RNCC: D | RNVC: 9

1 Jan 1992

3040-01-356-6836
Straight Shaft

013566836
25613: RNCC: 3 | RNVC: 9
230038: RNCC: 5 | RNVC: 2

9 Apr 1992

3040-01-358-6882
Multiple Disk Subassembly Brake

013586882
441-0030-0000: RNCC: 3 | RNVC: 2
2001270 & 1001233: RNCC: 5 | RNVC: 2
44100300000: RNCC: 5 | RNVC: 9

18 May 1992

3040-01-359-4968
Manual Control Lever

013594968
210079-1: RNCC: 3 | RNVC: 2
294028-1: RNCC: 5 | RNVC: 9
13060891: RNCC: 7 | RNVC: 2

6 Jun 1992

3040-01-359-7053
Brake Disc

013597053
226515: RNCC: 3 | RNVC: 2

10 Jun 1992

3040-01-359-8370
Linear Actuating Cylinder Assembly

013598370
AT24721: RNCC: 3 | RNVC: 2
8803-024: RNCC: 5 | RNVC: 9
SW24721: RNCC: 5 | RNVC: 9

13 Jun 1992

3040-01-360-6348
Mechanical Drive Housing

013606348
29537006: RNCC: 3 | RNVC: 2
29537006: RNCC: 5 | RNVC: 2
29537006: RNCC: 5 | RNVC: 2
29506068: RNCC: 5 | RNVC: 9
29506068: RNCC: 5 | RNVC: 9
29511360: RNCC: 5 | RNVC: 9
29511360: RNCC: 5 | RNVC: 9
29537006: RNCC: 5 | RNVC: 9
29511360: RNCC: 5 | RNVC: 9
29537006: RNCC: C | RNVC: 1

28 Jun 1992

3040-01-360-6524
Mechanically Actuated Spindle

013606524
29537931: RNCC: 3 | RNVC: 2
29501557: RNCC: 5 | RNVC: 2
29501557: RNCC: 5 | RNVC: 2
29501557: RNCC: 5 | RNVC: 9
22KP567: RNCC: 7 | RNVC: 2
029150T: RNCC: C | RNVC: 1

28 Jun 1992

3040-01-360-7695
Turbine Engine Compressor Stator Arm

013607695
4081060: RNCC: 3 | RNVC: 2
4081060: RNCC: 5 | RNVC: 2

1 Jul 1992

3040-01-361-2509
Shaft Retaining Plate

013612509
107-7694: RNCC: 3 | RNVC: 2
23KP105: RNCC: 5 | RNVC: 1
107-7694: RNCC: 5 | RNVC: 2
107-7694: RNCC: 5 | RNVC: 2
7W6469: RNCC: 5 | RNVC: 9

11 Jul 1992

3040-01-361-3278
Linear Actuating Cylinder

013613278
4CBC2HLTS24AX46 AG152755B: RNCC: 3 | RNVC: 2
4CB2HLTS24X40 AG152755: RNCC: 5 | RNVC: 9

14 Jul 1992

3040-01-362-5275
Hydrotest Plate

013625275
12553F18D: RNCC: 3 | RNVC: 2
5X9HBX368X1: RNCC: 3 | RNVC: 9
5X9HBX368X1: RNCC: C | RNVC: 1
12553F18: RNCC: D | RNVC: 9

8 Aug 1992

3040-01-363-2393
Linear Actuating Cylinder Piston

013632393
845-4457741 REV S PIECE 7: RNCC: 3 | RNVC: 2

27 Aug 1992

3040-01-363-2475
Spur Gearshaft

013632475
3606382-5: RNCC: 3 | RNVC: 2
3606382: RNCC: D | RNVC: 9

27 Aug 1992

3040-01-363-2476
Spur Gearshaft

013632476
3882601-2: RNCC: 3 | RNVC: 2
3882601-2: RNCC: 5 | RNVC: 2
3882601: RNCC: D | RNVC: 9

27 Aug 1992

3040-01-365-5719
Rigid Connecting Link

013655719
253C645-13: RNCC: 3 | RNVC: 2
253C645-13: RNCC: 5 | RNVC: 9

8 Oct 1992

3040-01-366-5217
Nonrotating Shaft Eye Bracket

013665217
199826A00: RNCC: 3 | RNVC: 2
199826-A: RNCC: 3 | RNVC: 9

28 Oct 1992

3040-01-366-5028
Rigid Connecting Link

013665028
1348AS1018: RNCC: 3 | RNVC: 2
1348AS1018: RNCC: 5 | RNVC: 2

27 Oct 1992

3040-01-367-0140
Shouldered Shaft

013670140
5C1-03938: RNCC: 3 | RNVC: 2

5 Nov 1992

3040-01-370-1433
Linear Actuating Cylinder Assembly

013701433
CUS8707-C033: RNCC: 3 | RNVC: 2
CYSR 5000 HY84T2R500850200990: RNCC: 3 | RNVC: 9
89156948: RNCC: 5 | RNVC: 9
89156974: RNCC: 5 | RNVC: 9
8707 C033: RNCC: 5 | RNVC: 9

14 Jan 1993

3040-01-339-7446
Shouldered Shaft

013397446
145R3052-7: RNCC: 3 | RNVC: 2
145R3052-7: RNCC: 5 | RNVC: 1
145R3052-7: RNCC: 7 | RNVC: 2

29 May 1991

3040-01-350-9086
Transmission Range Clutch Hub

013509086
12361757: RNCC: 3 | RNVC: 2
12361757: RNCC: 5 | RNVC: 2
12361757: RNCC: 5 | RNVC: 2
12361757: RNCC: 5 | RNVC: 2
6450 E2: RNCC: 5 | RNVC: 9

25 Dec 1991

3040-01-348-9601
Control Cam

013489601
211046636: RNCC: 3 | RNVC: 2
801-6404977 FIND 6: RNCC: 5 | RNVC: 2
DF330654 FIND 6: RNCC: 5 | RNVC: 9
6404977 FIND 6: RNCC: C | RNVC: 1
801-6404977: RNCC: D | RNVC: 9
6404977: RNCC: D | RNVC: 9

19 Nov 1991

3040-01-350-8441
Shouldered Shaft

013508441
3168811-5: RNCC: 3 | RNVC: 2
10107258: RNCC: 6 | RNVC: 9

23 Dec 1991

3040-01-350-3980
Pawl

013503980
2HE580: RNCC: 1 | RNVC: 2
A2-2297-U-4597: RNCC: 3 | RNVC: 2
0741512: RNCC: 5 | RNVC: 2
A2 2297U4597: RNCC: 5 | RNVC: 9
NA22297U4597: RNCC: 5 | RNVC: 9
2HE580: RNCC: 5 | RNVC: 9

14 Dec 1991

3040-01-350-9161
Nonrotating Shaft Eye Bracket

013509161
12361561-1: RNCC: 3 | RNVC: 2
12361561-1: RNCC: 5 | RNVC: 2
12361561-1: RNCC: 5 | RNVC: 2
12361561: RNCC: D | RNVC: 9

25 Dec 1991

3040-01-355-0533
Oil Pan Parts Kit

013550533
2HS492: RNCC: 3 | RNVC: 2
1933430W: RNCC: 5 | RNVC: 9
2HS492: RNCC: 5 | RNVC: 9

11 Mar 1992

3040-01-355-7694
Rigid Connecting Link

013557694
12553398: RNCC: 3 | RNVC: 2

23 Mar 1992

3040-01-337-8121
Control Cam

013378121
KR2238-3A: RNCC: 3 | RNVC: 2
KR2238: RNCC: D | RNVC: 9
KR780800: RNCC: D | RNVC: 9

21 Apr 1991

3040-01-334-9258
Hub Clamp

013349258
1252143: RNCC: 3 | RNVC: 2
1252143: RNCC: 5 | RNVC: 9

4 Mar 1991

3040-01-338-9643
Shouldered Shaft Assembly

013389643
5008489: RNCC: 3 | RNVC: 2

14 May 1991

3040-01-340-7104
Counterbalance Weight

013407104
2301016: RNCC: 3 | RNVC: 2
AS44522-020: RNCC: 5 | RNVC: 2
AS44522-020: RNCC: 5 | RNVC: 9
AS44522-020: RNCC: 5 | RNVC: 9
AS44522-020: RNCC: 5 | RNVC: 9

19 Jun 1991

3040-01-346-2803
Linear Actuating Cylinder

013462803
1BB-3LL28A111/2: RNCC: 3 | RNVC: 2
1386AS119-1: RNCC: 7 | RNVC: 2
1BB-3LL28A111/2: RNCC: C | RNVC: 1

1 Oct 1991

3040-01-346-3238
Rigid Connecting Link

013463238
18-23504-000: RNCC: 3 | RNVC: 2
18-23504: RNCC: D | RNVC: 9

3 Oct 1991

3040-01-345-5955
Remote Control Lever

013455955
741723: RNCC: 3 | RNVC: 2
741723: RNCC: 5 | RNVC: 2

21 Sep 1991

3040-01-360-6525
Mechanically Actuated Spindle

013606525
29537932: RNCC: 3 | RNVC: 2
29501556: RNCC: 5 | RNVC: 9
029165T: RNCC: C | RNVC: 1

28 Jun 1992

3040-01-361-0756
Body Hub

013610756
29530449: RNCC: 3 | RNVC: 2
22KP755: RNCC: 5 | RNVC: 1
29500687: RNCC: 5 | RNVC: 2
29500687: RNCC: 5 | RNVC: 2
29500687: RNCC: 5 | RNVC: 9
029098T: RNCC: C | RNVC: 1

8 Jul 1992

3040-01-361-4962
Brake Disc

013614962
56P40-1900: RNCC: 3 | RNVC: 2
56P40-11 REF 16: RNCC: 5 | RNVC: 2

17 Jul 1992

3040-01-362-1775
Shouldered Shaft

013621775
3-P-1050X: RNCC: 3 | RNVC: 2
3-P-832: RNCC: 3 | RNVC: 9
3-P-832: RNCC: 5 | RNVC: 2
3-P-832: RNCC: 5 | RNVC: 2
3-P-832: RNCC: C | RNVC: 1

1 Aug 1992

3040-01-361-5156
Linear Actuating Cylinder Cap

013615156
3563-05: RNCC: 3 | RNVC: 2

18 Jul 1992

3040-01-356-6837
Shouldered Shaft

013566837
12681865: RNCC: 3 | RNVC: 2
1862690W: RNCC: 5 | RNVC: 2
1862690W: RNCC: 5 | RNVC: 9

9 Apr 1992

3040-01-357-7901
Straight Shaft

013577901
3868001-1: RNCC: 3 | RNVC: 2

30 Apr 1992

3040-01-358-8708
Rigid Connecting Link

013588708
17387: RNCC: 3 | RNVC: 2
5938683: RNCC: 5 | RNVC: 2
5342PL0765573: RNCC: 6 | RNVC: 9

22 May 1992

3040-01-317-2279
Shaft Collar

013172279
7269282: RNCC: 3 | RNVC: 2

24 Mar 1990

3040-01-317-1580
Rigid Connecting Link

013171580
7339435: RNCC: 3 | RNVC: 2

23 Mar 1990

3040-01-317-2813
Control Cam

013172813
3031-554: RNCC: 3 | RNVC: 2

27 Mar 1990

3040-01-318-3718
Spur Gearshaft

013183718
A-15268: RNCC: 3 | RNVC: 2

17 Apr 1990

3040-01-317-0271
Rigid Connecting Link

013170271
4069279: RNCC: 3 | RNVC: 2
4069279: RNCC: 5 | RNVC: 2
3040PL0668545: RNCC: 6 | RNVC: 9

21 Mar 1990

3040-01-318-7931
Shouldered Shaft

013187931
210105: RNCC: 3 | RNVC: 2

25 Apr 1990

3040-01-319-4340
Straight Shaft

013194340
A-18558: RNCC: 3 | RNVC: 9

8 May 1990

3040-01-320-0995
Rigid Connecting Link

013200995
4417-172: RNCC: 3 | RNVC: 2
4417-172: RNCC: 3 | RNVC: 2

18 May 1990

3040-01-320-5414
Control Cam

013205414
2676563: RNCC: 3 | RNVC: 2

26 May 1990

3040-01-321-4540
Manual Control Lever

013214540
14301-6631-0: RNCC: 3 | RNVC: 9
14301-6631-1: RNCC: 5 | RNVC: 9

19 Jun 1990

3040-01-321-9998
Spur Gearshaft

013219998
5190291: RNCC: 3 | RNVC: 2
5190291: RNCC: 5 | RNVC: 2

27 Jun 1990

3040-01-323-9140
Mechanical Drive Housing

013239140
9340M58P02: RNCC: 3 | RNVC: 2

5 Aug 1990

3040-01-323-4208
Extension Shaft

013234208
3825029-2: RNCC: 3 | RNVC: 2
3825029-2: RNCC: 3 | RNVC: 9
3825029-2: RNCC: 5 | RNVC: 9
3040PL1195639: RNCC: 6 | RNVC: 9

27 Jul 1990

3040-01-325-2180
Spur Gearshaft

013252180
3024-312: RNCC: 3 | RNVC: 2

30 Aug 1990

3040-01-325-4928
Control Cam

013254928
7002541-1: RNCC: 3 | RNVC: 2
7002541-1: RNCC: 5 | RNVC: 2
7002541-1: RNCC: 5 | RNVC: 2
10107027: RNCC: 6 | RNVC: 9

5 Sep 1990

3040-01-325-8272
Rigid Connecting Link

013258272
75A353058-1001: RNCC: 3 | RNVC: 2
75A353058: RNCC: D | RNVC: 9

11 Sep 1990

3040-01-326-5945
Shouldered Shaft

013265945
1203512: RNCC: 3 | RNVC: 2
PL-321684 ITEM 4: RNCC: 5 | RNVC: 2
PL-321684: RNCC: D | RNVC: 9

27 Sep 1990

3040-01-325-9179
Spur Gearshaft

013259179
605-033-002: RNCC: 3 | RNVC: 2
605-033-002: RNCC: 5 | RNVC: 9

13 Sep 1990

3040-01-326-9752
Shaft Retaining Plate

013269752
742080: RNCC: 3 | RNVC: 2

4 Oct 1990

3040-01-327-1977
Straight Shaft

013271977
TU7356: RNCC: 3 | RNVC: 9

10 Oct 1990

3040-01-327-2929
Linear Actuating Cylinder Piston

013272929
T116563: RNCC: 3 | RNVC: 2
4642 306 248: RNCC: 5 | RNVC: 9

11 Oct 1990

3040-01-327-5007
Control Cam

013275007
2676015: RNCC: 3 | RNVC: 2

16 Oct 1990

3040-01-327-6002
Control Cam

013276002
2676012: RNCC: 3 | RNVC: 2

17 Oct 1990

3040-01-327-7629
Friction Lining

013277629
83-64-410C: RNCC: 3 | RNVC: 2

21 Oct 1990

3040-01-328-8016
Flexible Casing End Fitting

013288016
5-4-6953: RNCC: 3 | RNVC: 2

7 Nov 1990

3040-01-330-5064
Nonrotating Shaft Eye Bracket

013305064
12369152: RNCC: 3 | RNVC: 2

4 Dec 1990

3040-01-330-9490
Multiple Gears Gearshaft

013309490
4004792-0001: RNCC: 3 | RNVC: 2
4004792: RNCC: D | RNVC: 9

12 Dec 1990

3040-01-332-5474
Rigid Connecting Link

013325474
12371009: RNCC: 1 | RNVC: 2
23048552: RNCC: 3 | RNVC: 2

11 Jan 1991

3040-01-333-0542
Rigid Connecting Link

013330542
209-001-079-101: RNCC: 3 | RNVC: 2

21 Jan 1991

3040-01-330-6124
Nonrotating Shaft Eye Bracket

013306124
1127722: RNCC: 3 | RNVC: 2
315494 FIND 17: RNCC: 5 | RNVC: 2
315494: RNCC: D | RNVC: 9

5 Dec 1990

3040-01-334-0751
Rigid Connecting Link

013340751
753665-2: RNCC: 3 | RNVC: 2

14 Feb 1991

3040-01-334-4901
Straight Shaft

013344901
1226-224: RNCC: 3 | RNVC: 2

23 Feb 1991

3040-01-335-8519
Flexible Drive Shaft

013358519
9380316-2: RNCC: 1 | RNVC: 2
0312-18634-Y-022.75: RNCC: 3 | RNVC: 9
B-404-9398-102: RNCC: 5 | RNVC: 2

14 Mar 1991

3040-01-338-2410
Linear Actuating Cylinder Assembly

013382410
ARS/BVC3A: RNCC: 3 | RNVC: 2
80.618.00.019: RNCC: 5 | RNVC: 9

28 Apr 1991

3040-01-338-4433
Shouldered Shaft

013384433
1704350: RNCC: 3 | RNVC: 2
1704350: RNCC: 5 | RNVC: 9

3 May 1991

3040-01-337-0659
Rigid Connecting Link

013370659
70209-82507-041: RNCC: 3 | RNVC: 2

9 Apr 1991

3040-01-337-4157
Mechanical Drive Housing

013374157
A027096829: RNCC: 3 | RNVC: 9
A027096829: RNCC: 5 | RNVC: 2
2EH558: RNCC: 5 | RNVC: 2
2EH558: RNCC: 5 | RNVC: 9
71260: RNCC: 5 | RNVC: 9
96829: RNCC: 5 | RNVC: 9

14 Apr 1991

3040-01-340-9792
Shouldered Shaft

013409792
2B1-430: RNCC: 3 | RNVC: 2
2B1-430: RNCC: 5 | RNVC: 9

23 Jun 1991

3040-01-341-2439
Linear Actuating Cylinder Assembly

013412439
1304153: RNCC: 3 | RNVC: 2
1304153: RNCC: 5 | RNVC: 2

26 Jun 1991

3040-01-341-4993
Linear Actuating Cylinder Assembly Parts Kit

013414993
CB152HL005: RNCC: 3 | RNVC: 2

1 Jul 1991

3040-01-341-7011
Shaft Collar

013417011
204900: RNCC: 3 | RNVC: 2

5 Jul 1991

3040-01-342-8714
Breather

013428714
000374020-004: RNCC: 3 | RNVC: 2
061-000-084 ITEM 70: RNCC: 5 | RNVC: 2

31 Jul 1991

3040-01-344-1840
Mechanical Drive Housing

013441840
741715: RNCC: 3 | RNVC: 2

24 Aug 1991

3040-01-344-5745
Shaft Collar

013445745
12591549: RNCC: 3 | RNVC: 2

31 Aug 1991

3040-01-344-9334
Multiple Gears Gearshaft

013449334
1891070 U: RNCC: 3 | RNVC: 2
1891070 U: RNCC: 5 | RNVC: 9
1891070: RNCC: D | RNVC: 9

8 Sep 1991

3040-01-345-5693
Straight Shaft

013455693
1723870: RNCC: 3 | RNVC: 2
1723870: RNCC: 5 | RNVC: 9

21 Sep 1991

3040-01-346-9820
Shaft Collar

013469820
1721380: RNCC: 3 | RNVC: 2
1721380: RNCC: 5 | RNVC: 9
B-2848: RNCC: 5 | RNVC: 9

12 Oct 1991

3040-01-346-9871
Mechanical Drive Housing

013469871
013592: RNCC: 3 | RNVC: 2
2HG714: RNCC: 5 | RNVC: 2
2HG714: RNCC: 5 | RNVC: 9
013592: RNCC: 5 | RNVC: 9
2GH463: RNCC: C | RNVC: 1
96-013669: RNCC: D | RNVC: 9

12 Oct 1991

3040-01-347-4427
Shouldered Shaft

013474427
6318288: RNCC: 1 | RNVC: 2
592-6318288: RNCC: 3 | RNVC: 2
550-057: RNCC: 5 | RNVC: 1
BK850427110: RNCC: 5 | RNVC: 1

21 Oct 1991

3040-01-348-4524
Spur Gearshaft

013484524
3501311-1: RNCC: 3 | RNVC: 2
3501311: RNCC: D | RNVC: 9

9 Nov 1991

3040-01-350-9062
Shaft Collar

013509062
12370627: RNCC: 3 | RNVC: 2
12370627: RNCC: 5 | RNVC: 2
12370627: RNCC: 5 | RNVC: 2

25 Dec 1991

3040-01-351-6027
Nonrotating Shaft Eye Bracket

013516027
12361539-2: RNCC: 3 | RNVC: 2
12361539-2: RNCC: 5 | RNVC: 9
12361539: RNCC: D | RNVC: 9

11 Jan 1992

3040-01-351-7405
Rotating Shaft Eye Bracket

013517405
717512895-009: RNCC: 3 | RNVC: 2
717512895-009: RNCC: 5 | RNVC: 2

15 Jan 1992

3040-01-351-9959
Piston Ring

013519959
7-753-000544: RNCC: 3 | RNVC: 9
7-753-000544: RNCC: 5 | RNVC: 2
7-753-000544: RNCC: 5 | RNVC: 2
7-753-000544: RNCC: 5 | RNVC: 2
2CD804: RNCC: C | RNVC: 1

17 Jan 1992

3040-01-352-2346
Mechanical Drive Housing

013522346
SP1C43C: RNCC: 3 | RNVC: 1
SP1C43CXC: RNCC: 5 | RNVC: 9
15636A: RNCC: 5 | RNVC: 9

23 Jan 1992

3040-01-352-6093
Linear Actuating Cylinder Piston

013526093
40A2034: RNCC: 3 | RNVC: 2

29 Jan 1992

3040-01-348-8878
Brake Shoe

013488878
B2-1A: RNCC: 3 | RNVC: 2
B2-1A: RNCC: 3 | RNVC: 9
A1063-22: RNCC: 5 | RNVC: 9

19 Nov 1991

3040-01-353-8364
Flexible Shaft Assembly Casing

013538364
612463-5R: RNCC: 3 | RNVC: 2

18 Feb 1992

3040-01-354-0569
Body Hub

013540569
0011-2002: RNCC: 3 | RNVC: 2
001-ALUM 4-HOLE HUB: RNCC: 5 | RNVC: 9

21 Feb 1992

3040-01-355-1117
Adapter Shaft Assembly

013551117
DAA3272P016-425: RNCC: 1 | RNVC: 2
125328C-07: RNCC: 3 | RNVC: 2
125328B-7: RNCC: 5 | RNVC: 9
DAA3272P016-125: RNCC: 5 | RNVC: 9

11 Mar 1992

3040-01-355-9067
Shouldered Shaft Assembly

013559067
1253288-3: RNCC: 3 | RNVC: 2
DAA3272P016-117: RNCC: 5 | RNVC: 2

26 Mar 1992

3040-01-355-9068
Shouldered Shaft Assembly

013559068
125328B-8: RNCC: 3 | RNVC: 2
DAA3272P016-127: RNCC: 5 | RNVC: 2
1253288-8: RNCC: 5 | RNVC: 9

26 Mar 1992

3040-01-355-7695
Rigid Connecting Link

013557695
123AMM42155-611: RNCC: 3 | RNVC: 2
123AMM42155-611: RNCC: 5 | RNVC: 9
123AMM42155: RNCC: D | RNVC: 9

23 Mar 1992

3040-01-355-9560
Control Cam

013559560
FRUWCF1376-1: RNCC: 3 | RNVC: 9
WCF001376001: RNCC: 5 | RNVC: 9

27 Mar 1992

3040-01-356-4640
Linear Actuating Cylinder

013564640
230049: RNCC: 3 | RNVC: 2
100035: RNCC: 3 | RNVC: 9
25564: RNCC: 5 | RNVC: 9

4 Apr 1992

3040-01-356-9821
Shaft Collar

013569821
12592589: RNCC: 3 | RNVC: 2

15 Apr 1992

3040-01-363-2769
Pawl

013632769
195683-A: RNCC: 3 | RNVC: 2

27 Aug 1992

3040-01-363-7081
Spline Adapter

013637081
23014: RNCC: 3 | RNVC: 2
5905733-2: RNCC: 5 | RNVC: 2
5905733: RNCC: D | RNVC: 9

4 Sep 1992

3040-01-363-8659
Rigid Connecting Link

013638659
CAT0063: RNCC: 3 | RNVC: 2
CAT0063: RNCC: 5 | RNVC: 9

8 Sep 1992

3040-01-363-8162
Rigid Connecting Link

013638162
17P2C1410-1: RNCC: 3 | RNVC: 2

6 Sep 1992

3040-01-363-3756
Spring Rewind Housing

013633756
323091L-PNT1: RNCC: 3 | RNVC: 2
323091L: RNCC: 5 | RNVC: 9

28 Aug 1992

3040-01-365-2614
Linear Actuating Cylinder Piston

013652614
MBEU146493: RNCC: 3 | RNVC: 2
MBEU146493: RNCC: 5 | RNVC: 2
10107283: RNCC: 6 | RNVC: 9

4 Oct 1992

3040-01-365-2738
Rigid Connecting Link

013652738
MBEU147188: RNCC: 3 | RNVC: 2
MBEU147188: RNCC: 5 | RNVC: 2

4 Oct 1992

3040-01-366-3817
Shaft Collar

013663817
12950873: RNCC: 3 | RNVC: 2

24 Oct 1992

3040-01-366-5770
Rigid Connecting Link

013665770
DAA3255A237-001: RNCC: 3 | RNVC: 2
DAA32554A237-001: RNCC: 5 | RNVC: 9

28 Oct 1992

3040-01-367-4963
Linear Actuating Cylinder Assembly

013674963
SW22477: RNCC: 3 | RNVC: 2
11800: RNCC: 5 | RNVC: 2
8803-030: RNCC: 5 | RNVC: 9

13 Nov 1992

3040-01-367-9649
Shouldered Shaft

013679649
12950872: RNCC: 3 | RNVC: 2

22 Nov 1992

3040-01-368-0087
Linear Actuating Cylinder Assembly

013680087
8801-008: RNCC: 3 | RNVC: 9
8801-008E: RNCC: 5 | RNVC: 9
SW24920: RNCC: 7 | RNVC: 2

23 Nov 1992

3040-01-368-2703
Control Cam

013682703
211038971: RNCC: 3 | RNVC: 2
801-6405531-5: RNCC: 5 | RNVC: 2
801-6405531: RNCC: D | RNVC: 9

27 Nov 1992

3040-01-368-8196
Shouldered Shaft

013688196
13168: RNCC: 3 | RNVC: 2
2HP277: RNCC: 5 | RNVC: 2
2HP277: RNCC: 5 | RNVC: 9
13168-G: RNCC: 5 | RNVC: 9

9 Dec 1992

3040-01-368-8253
Spur Gearshaft

013688253
756798: RNCC: 3 | RNVC: 2

9 Dec 1992

3040-01-369-4159
Shouldered Shaft

013694159
20717-1030: RNCC: 3 | RNVC: 2
20717-003 FIND 12: RNCC: 5 | RNVC: 9

22 Dec 1992

3040-01-370-1568
Remote Control Lever

013701568
308235: RNCC: 3 | RNVC: 9
345947: RNCC: 5 | RNVC: 2
308235: RNCC: 5 | RNVC: 9
345947: RNCC: 5 | RNVC: 9

14 Jan 1993

3040-01-360-8040
Body Hub

013608040
29511396: RNCC: 3 | RNVC: 2
29511396: RNCC: 5 | RNVC: 2
29511396: RNCC: 5 | RNVC: 2
29503970: RNCC: 5 | RNVC: 9

1 Jul 1992

3040-01-361-0574
Shouldered Shaft

013610574
3P678X: RNCC: 3 | RNVC: 2
3-P-678: RNCC: 5 | RNVC: 9

8 Jul 1992

3040-01-316-1117
Linear Actuating Cylinder Assembly

013161117
1350357: RNCC: 3 | RNVC: 2
1350357: RNCC: 3 | RNVC: 9
379555: RNCC: 5 | RNVC: 9

3 Mar 1990

3040-01-316-0566
Counterbalance Weight

013160566
3755-6: RNCC: 3 | RNVC: 2
3755-6: RNCC: 5 | RNVC: 2
3755-6: RNCC: 5 | RNVC: 2
3040PL0905117: RNCC: 6 | RNVC: 9

2 Mar 1990

3040-01-316-7740
Brake Shoe

013167740
510984: RNCC: 3 | RNVC: 2

16 Mar 1990

3040-01-316-3087
Winch Jackscrew

013163087
24968-1: RNCC: 3 | RNVC: 2
24968: RNCC: D | RNVC: 9

8 Mar 1990

3040-01-316-8841
Bell Crank

013168841
12370821: RNCC: 3 | RNVC: 2
12353551: RNCC: 5 | RNVC: 9

16 Mar 1990

3040-01-316-9688
Straight Axle

013169688
LG0094-6400: RNCC: 3 | RNVC: 2
LG0094: RNCC: 5 | RNVC: 2
LG0094-64: RNCC: 5 | RNVC: 9

19 Mar 1990

3040-01-317-2812
Control Cam

013172812
3035-328: RNCC: 3 | RNVC: 2
3035-328: RNCC: 5 | RNVC: 2
3035-328: RNCC: 5 | RNVC: 2

27 Mar 1990

3040-01-318-0247
Linear Actuating Cylinder Assembly Parts Kit

013180247
AH149843: RNCC: 3 | RNVC: 2
RE20430: RNCC: 5 | RNVC: 9
RE20430: RNCC: 5 | RNVC: 9

11 Apr 1990

3040-01-318-0787
Tie Bar Molding

013180787
198583-B: RNCC: 3 | RNVC: 2
198583B00: RNCC: 5 | RNVC: 2

12 Apr 1990

3040-01-318-4848
Manual Release Brake Assembly

013184848
120612-101: RNCC: 3 | RNVC: 2
120612: RNCC: 5 | RNVC: 9
120612-101: RNCC: 5 | RNVC: 9
120612: RNCC: 5 | RNVC: 9

19 Apr 1990

3040-01-318-7613
Turbine Engine Compressor Stator Arm

013187613
4079920: RNCC: 3 | RNVC: 2
4066817: RNCC: 5 | RNVC: 2

25 Apr 1990

3040-01-320-9291
Friction Lining

013209291
78551480: RNCC: 3 | RNVC: 2

6 Jun 1990

3040-01-320-9424
Shouldered Shaft

013209424
856A4055P79: RNCC: 3 | RNVC: 2
856A4055P79: RNCC: 3 | RNVC: 9

6 Jun 1990

3040-01-321-6242
Rigid Connecting Link

013216242
4069486: RNCC: 3 | RNVC: 2
3040PL0669105: RNCC: 6 | RNVC: 9

20 Jun 1990

3040-01-322-7785
Remote Control Lever

013227785
7002533-1: RNCC: 3 | RNVC: 2
7002533-1: RNCC: 5 | RNVC: 2
10130527: RNCC: 6 | RNVC: 9

13 Jul 1990

3040-01-322-7786
Remote Control Lever

013227786
7002542-1: RNCC: 3 | RNVC: 2
7002542-1: RNCC: 5 | RNVC: 9
10107020: RNCC: 6 | RNVC: 9

13 Jul 1990

3040-01-323-0110
Straight Shaft

013230110
36-155-070: RNCC: 3 | RNVC: 2
6455007623: RNCC: 5 | RNVC: 9

18 Jul 1990

3040-01-323-3294
Remote Control Lever

013233294
114250-03591: RNCC: 3 | RNVC: 2
114250-03591: RNCC: 3 | RNVC: 9
3040PL0806627: RNCC: 6 | RNVC: 9

26 Jul 1990

3040-01-323-5939
Shouldered Shaft

013235939
SW25350: RNCC: 3 | RNVC: 2

31 Jul 1990

3040-01-324-1191
Shouldered Shaft

013241191
S13-44466-0: RNCC: 3 | RNVC: 2
S13-44466: RNCC: 5 | RNVC: 9

10 Aug 1990

3040-01-325-9498
Shouldered Shaft

013259498
M05-12713-P1: RNCC: 3 | RNVC: 1
M00-12696-G1/3 ITEM 8VM: RNCC: 5 | RNVC: 2
M05-12713-P1VM: RNCC: 5 | RNVC: 2
M00-12696-G1/3 ITEM 8: RNCC: 5 | RNVC: 9

14 Sep 1990

3040-01-325-8194
Shouldered Shaft

013258194
3C3165P06: RNCC: 3 | RNVC: 2
3C3165P06: RNCC: 5 | RNVC: 2
363165P06: RNCC: 5 | RNVC: 9
3C3165P06: RNCC: 5 | RNVC: 9
3C3165P06: RNCC: 5 | RNVC: 9
3C3165: RNCC: D | RNVC: 9

11 Sep 1990

3040-01-326-9723
Control Cam

013269723
68A351075-2005: RNCC: 3 | RNVC: 2

4 Oct 1990

3040-01-327-0470
Shouldered Shaft

013270470
11688: RNCC: 3 | RNVC: 2
11688-G: RNCC: 3 | RNVC: 2
2GL22: RNCC: 5 | RNVC: 2
11688: RNCC: 5 | RNVC: 9
2GL22: RNCC: 5 | RNVC: 9

5 Oct 1990

3040-01-327-5273
Rigid Connecting Link

013275273
9540M47G01: RNCC: 3 | RNVC: 2
9540M47G01: RNCC: 5 | RNVC: 2
9540M47: RNCC: D | RNVC: 9

16 Oct 1990

3040-01-327-8065
Straight Shaft

013278065
65276F01: RNCC: 3 | RNVC: 2
75125F91 ITEM AR: RNCC: 5 | RNVC: 2
74548F02: RNCC: 5 | RNVC: 9

21 Oct 1990

3040-01-328-2892
Shouldered Shaft

013282892
2111007-256: RNCC: 3 | RNVC: 2

30 Oct 1990

3040-01-328-3485
Mechanical Drive Housing

013283485
1353AS116-1: RNCC: 3 | RNVC: 2

30 Oct 1990

3040-01-329-8567
Manual Control Lever

013298567
397001: RNCC: 3 | RNVC: 2
397001: RNCC: 3 | RNVC: 9
397001: RNCC: 5 | RNVC: 9
397001: RNCC: 5 | RNVC: 9

24 Nov 1990

3040-01-330-0646
Shouldered Shaft

013300646
KIT2825: RNCC: 3 | RNVC: 2
2244-K-1025: RNCC: 5 | RNVC: 2
2244-K-1025: RNCC: 5 | RNVC: 9

29 Nov 1990

3040-01-329-5097
Push-Pull Control Assembly

013295097
3025-075-0560: RNCC: 3 | RNVC: 2
56V02-3-220: RNCC: 3 | RNVC: 2
016845V: RNCC: 5 | RNVC: 2
D038033-003-0220.0: RNCC: 5 | RNVC: 9
D038033-003-0220.0: RNCC: 5 | RNVC: 9
56V02-3-220: RNCC: 5 | RNVC: 9

18 Nov 1990

3040-01-330-7800
Shouldered Shaft

013307800
5061T13P01: RNCC: 3 | RNVC: 2
55061T13P01: RNCC: 5 | RNVC: 9
5061T13P01: RNCC: 5 | RNVC: 9
5061T13P01: RNCC: 5 | RNVC: 9

8 Dec 1990

3040-01-331-1755
Mechanical Drive Housing

013311755
329501092A01: RNCC: 3 | RNVC: 2
A8-3235-W-1843: RNCC: 5 | RNVC: 2
A8-3235-W-1843: RNCC: 5 | RNVC: 2
A8-3235-W-1843: RNCC: 5 | RNVC: 9

14 Dec 1990

3040-01-332-8549
Mechanical Drive Housing

013328549
582312-4: RNCC: 3 | RNVC: 2
10107035: RNCC: 6 | RNVC: 9

18 Jan 1991

3040-01-333-0973
Carrier Ring

013330973
518200200: RNCC: 3 | RNVC: 2
5-18-2002: RNCC: 5 | RNVC: 9

24 Jan 1991

3040-01-333-1925
Linear Actuating Cylinder Assembly Parts Kit

013331925
A-2813: RNCC: 3 | RNVC: 2
73000579: RNCC: 5 | RNVC: 9

26 Jan 1991

3040-01-336-2889
Rigid Connecting Link

013362889
F405-10882-1: RNCC: 3 | RNVC: 2
F405-10882-1: RNCC: 5 | RNVC: 9

24 Mar 1991

3040-01-337-4549
Linear Actuating Cylinder Head

013374549
CB27583-001: RNCC: 3 | RNVC: 2
29527: RNCC: 3 | RNVC: 9
895-29475 ITEM 8: RNCC: 5 | RNVC: 2
895-29475 REV G ITEM 8: RNCC: 5 | RNVC: 9

14 Apr 1991

3040-01-337-5150
Shaft Collar

013375150
218F751: RNCC: 3 | RNVC: 2

16 Apr 1991

3040-01-339-2550
Straight Shaft

013392550
8922968: RNCC: 3 | RNVC: 2

19 May 1991

3040-01-339-7565
Rigid Connecting Link

013397565
101369-1: RNCC: 3 | RNVC: 2

29 May 1991

3040-01-339-7507
Shouldered Shaft

013397507
70654-23801-102: RNCC: 1 | RNVC: 2
DS-937978: RNCC: 3 | RNVC: 2
937978: RNCC: 3 | RNVC: 2

29 May 1991

3040-01-339-8268
Linear Actuating Cylinder Assembly

013398268
1306169: RNCC: 3 | RNVC: 2
1306169: RNCC: 5 | RNVC: 9

31 May 1991

3040-01-341-0141
Counterbalance Weight

013410141
2301018: RNCC: 3 | RNVC: 2
AS44522-040: RNCC: 5 | RNVC: 2
AS44520 THRU 23: RNCC: 5 | RNVC: 9
AS44522-040: RNCC: 5 | RNVC: 9
AS44522-040: RNCC: 5 | RNVC: 9
AS44522-040: RNCC: 5 | RNVC: 9

23 Jun 1991

3040-01-341-5030
Transfer Drive Clutch Shaft

013415030
501071: RNCC: 3 | RNVC: 2
TM75114CA5-PG16 PC 15: RNCC: 5 | RNVC: 9
501071: RNCC: 5 | RNVC: 9

1 Jul 1991

3040-01-341-8605
Shouldered Shaft

013418605
803-5959220 PIECE 27: RNCC: 3 | RNVC: 2
803-5959220: RNCC: D | RNVC: 9

10 Jul 1991

3040-01-342-4425
Multiple Disk Brake

013424425
536290: RNCC: 3 | RNVC: 2
AA191071: RNCC: 3 | RNVC: 2
AA191071: RNCC: 5 | RNVC: 9
AA19107-1: RNCC: 5 | RNVC: 9
536290: RNCC: 5 | RNVC: 9

23 Jul 1991

3040-01-342-5125
Breather

013425125
061-000-087 ITEM 71: RNCC: 3 | RNVC: 2
0003740 20-002: RNCC: 5 | RNVC: 2
061-000087: RNCC: D | RNVC: 9

25 Jul 1991

3040-01-342-2454
Shaft Collar

013422454
803-5959220 PIECE 32: RNCC: 3 | RNVC: 2
803-5959220: RNCC: D | RNVC: 9

17 Jul 1991

3040-01-342-5137
Linear Actuating Cylinder Piston

013425137
90-004-1182: RNCC: 3 | RNVC: 2
90-004-1182 ITEM 2: RNCC: 5 | RNVC: 2

25 Jul 1991

3040-01-342-5214
Rigid Connecting Link

013425214
4436-154: RNCC: 3 | RNVC: 2

25 Jul 1991

3040-01-345-3002
Brake Disc

013453002
05360: RNCC: 3 | RNVC: 2
07010: RNCC: 5 | RNVC: 9

16 Sep 1991

3040-01-345-3580
Shouldered Shaft

013453580
40A95913-1: RNCC: 3 | RNVC: 2

18 Sep 1991

3040-01-344-1856
Linear Actuating Cylinder Piston

013441856
741725: RNCC: 3 | RNVC: 2

24 Aug 1991

3040-01-346-9955
Nonrotating Shaft Eye Bracket

013469955
SB-6: RNCC: 3 | RNVC: 2
996193-001: RNCC: 5 | RNVC: 2
996193: RNCC: 7 | RNVC: 1

12 Oct 1991

3040-01-347-4449
Counterbalance Weight

013474449
6170343: RNCC: 3 | RNVC: 2
6170343: RNCC: 5 | RNVC: 2

21 Oct 1991

3040-01-348-1363
Counterbalance Weight

013481363
AS44520-010: RNCC: 3 | RNVC: 2
AS44520-010: RNCC: 5 | RNVC: 2
AS44520-010: RNCC: 5 | RNVC: 9
AS44520-010: RNCC: 5 | RNVC: 9
AS44520-010: RNCC: 5 | RNVC: 9

5 Nov 1991

3040-01-348-6402
Brake Disc

013486402
8-004-702-00: RNCC: 3 | RNVC: 9
D-1200-JQ PC 14: RNCC: 5 | RNVC: 9
D-1200-JQ: RNCC: D | RNVC: 9

14 Nov 1991

3040-01-348-6492
Rigid Connecting Link

013486492
SW34689-1: RNCC: 3 | RNVC: 2
ULC0295: RNCC: 5 | RNVC: 2
SW33461: RNCC: 5 | RNVC: 9
SW31398: RNCC: 5 | RNVC: 9
3040013486492: RNCC: 6 | RNVC: 9
SW34689: RNCC: D | RNVC: 9

14 Nov 1991

3040-01-350-3313
Friction Lining Set

013503313
13-8480-1X2: RNCC: 3 | RNVC: 2
468480 PIECE 1: RNCC: 5 | RNVC: 2

13 Dec 1991

3040-01-350-6307
Straight Shaft

013506307
12361486: RNCC: 3 | RNVC: 2
12361486: RNCC: 5 | RNVC: 2
12361486: RNCC: 5 | RNVC: 2

19 Dec 1991

3040-01-350-9064
Straight Shaft

013509064
5D3-02236 ITEM 4: RNCC: 3 | RNVC: 2
5B1-03402 ITEM 4: RNCC: 5 | RNVC: 2
5B1-03402: RNCC: 5 | RNVC: 2
5D3-02236: RNCC: D | RNVC: 9

25 Dec 1991

3040-01-352-2413
Nonrotating Shaft Eye Bracket

013522413
1977709: RNCC: 3 | RNVC: 2

23 Jan 1992

3040-01-353-0258
Shouldered Shaft Assembly

013530258
40A2216: RNCC: 3 | RNVC: 2

5 Feb 1992

3040-01-353-0747
Remote Control Lever

013530747
593-6405224 PIECE 16: RNCC: 3 | RNVC: 2
6405224-16: RNCC: 5 | RNVC: 2
593-6405224 PIECE 6: RNCC: 5 | RNVC: 9
6405224 PIECE 6: RNCC: 5 | RNVC: 9
6405224: RNCC: D | RNVC: 9

5 Feb 1992

3040-01-353-2465
Rigid Connecting Link

013532465
13858-1: RNCC: 3 | RNVC: 2

7 Feb 1992

3040-01-353-8509
Shouldered Shaft

013538509
526-1067-02: RNCC: 3 | RNVC: 2
10107274: RNCC: 6 | RNVC: 9
526-1067: RNCC: D | RNVC: 9

19 Feb 1992

3040-01-354-2807
Brake Disc

013542807
4001362: RNCC: 3 | RNVC: 2
4001362: RNCC: 5 | RNVC: 9

26 Feb 1992

3040-01-355-3122
Linear Actuating Cylinder Head

013553122
6-372-003339: RNCC: 3 | RNVC: 2
2HE919: RNCC: 5 | RNVC: 2
2HE919: RNCC: 5 | RNVC: 9

14 Mar 1992

3040-01-355-5068
Rigid Connecting Link

013555068
209-001-083-101: RNCC: 3 | RNVC: 2

19 Mar 1992

3040-01-355-6032
Accumulator Cap

013556032
12910595-1: RNCC: 3 | RNVC: 2
12910595: RNCC: D | RNVC: 9

19 Mar 1992

3040-01-355-6026
Mechanical Drive Housing

013556026
9363701: RNCC: 3 | RNVC: 2

19 Mar 1992

3040-01-355-6370
Push-Pull Control Assembly

013556370
6539C010-5: RNCC: 3 | RNVC: 2
6539C010-5: RNCC: 5 | RNVC: 2
6539C010-5: RNCC: 5 | RNVC: 2
6539C010-3: RNCC: 5 | RNVC: 9
6539C010: RNCC: D | RNVC: 9

20 Mar 1992

3040-01-355-9716
Rigid Connecting Link

013559716
2-195-2-00008: RNCC: 3 | RNVC: 2
2HE950: RNCC: 5 | RNVC: 2
2HE950: RNCC: 5 | RNVC: 9

27 Mar 1992

3040-01-356-6947
Rigid Connecting Link

013566947
1635: RNCC: 3 | RNVC: 2
215-15-002-000: RNCC: 5 | RNVC: 9

9 Apr 1992

3040-01-356-7858
Worm Shaft

013567858
2179-3420-010: RNCC: 3 | RNVC: 2
2179-3420-010: RNCC: 5 | RNVC: 9
2179-3420-010: RNCC: 5 | RNVC: 9
PL 2179-3429-01: RNCC: C | RNVC: 1
2179-3420-010: RNCC: C | RNVC: 1

10 Apr 1992

3040-01-356-8691
Counterbalance Weight

013568691
A334A326-101: RNCC: 3 | RNVC: 2

12 Apr 1992

3040-01-358-8143
Mechanical Drive Housing

013588143
42357-121: RNCC: 3 | RNVC: 2

21 May 1992

3040-01-359-1119
Mechanical Drive Housing

013591119
17728: RNCC: 3 | RNVC: 2
17584: RNCC: 5 | RNVC: 2
5742777: RNCC: 5 | RNVC: 2
17584: RNCC: 5 | RNVC: 9
5939259: RNCC: 5 | RNVC: 9
5939259: RNCC: 5 | RNVC: 9

29 May 1992

3040-01-360-2474
Rigid Connecting Link

013602474
S4334010030: RNCC: 3 | RNVC: 2
3HR771: RNCC: 5 | RNVC: 9
3HR771: RNCC: 5 | RNVC: 9
1874860: RNCC: 7 | RNVC: 2

20 Jun 1992

3040-01-359-1116
Mechanical Drive Housing

013591116
17292: RNCC: 3 | RNVC: 2
5938604: RNCC: 5 | RNVC: 2
17292: RNCC: 5 | RNVC: 2
59338604: RNCC: 5 | RNVC: 9

29 May 1992

3040-01-360-4443
Housing Adapter

013604443
29506122: RNCC: 3 | RNVC: 2
29506122: RNCC: 5 | RNVC: 2
29506122: RNCC: 5 | RNVC: 2

24 Jun 1992

3040-01-358-6809
Housing Adapter

013586809
17128-2: RNCC: 3 | RNVC: 2

18 May 1992

3040-01-361-2428
Linear Actuating Cylinder Assembly

013612428
9110-TA: RNCC: 3 | RNVC: 2
9110-TA: RNCC: 5 | RNVC: 2

11 Jul 1992

3040-01-361-0758
Remote Control Lever

013610758
29503631: RNCC: 3 | RNVC: 2
80035609: RNCC: 5 | RNVC: 2
29503631: RNCC: 5 | RNVC: 2
29503631: RNCC: 5 | RNVC: 2
29503631: RNCC: 5 | RNVC: 9
29503631: RNCC: C | RNVC: 1

8 Jul 1992

3040-01-361-8049
Rigid Connecting Link

013618049
12592207: RNCC: 3 | RNVC: 2

25 Jul 1992

3040-01-363-4362
Mechanical Drive Housing Part

013634362
3883492-1: RNCC: 3 | RNVC: 2
3883492: RNCC: D | RNVC: 9

29 Aug 1992

3040-01-365-7151
Shaft Retaining Plate

013657151
HU9831178: RNCC: 3 | RNVC: 2
2HL282: RNCC: 5 | RNVC: 2
2HL282: RNCC: 5 | RNVC: 9
HU00152504: RNCC: 5 | RNVC: 9
US00830942: RNCC: 5 | RNVC: 9
152504: RNCC: 5 | RNVC: 9

11 Oct 1992

3040-01-365-7779
Drive Assembly

013657779
DDE 23523996: RNCC: 3 | RNVC: 2
R23509200: RNCC: 5 | RNVC: 2
R23509200: RNCC: 5 | RNVC: 2
R23509200: RNCC: 5 | RNVC: 2
DDE R23509200: RNCC: 5 | RNVC: 9
23509200: RNCC: 5 | RNVC: 9
R23509200: RNCC: 5 | RNVC: 9

14 Oct 1992

3040-01-367-7595
Rigid Connecting Link

013677595
12553419: RNCC: 3 | RNVC: 2
12553419: RNCC: 5 | RNVC: 2
12553419: RNCC: 5 | RNVC: 2

18 Nov 1992

3040-01-370-0225
Linear Actuating Cylinder

013700225
6-372-004235: RNCC: 3 | RNVC: 2
6-372-004235: RNCC: 5 | RNVC: 2
6-372-004235: RNCC: 5 | RNVC: 2
6-372-004335: RNCC: 5 | RNVC: 9

11 Jan 1993

3040-01-316-0191
Linear Actuating Cylinder Assembly

013160191
A3280P9818: RNCC: 3 | RNVC: 2

1 Mar 1990

3040-01-316-0756
Rigid Connecting Link

013160756
4905-185: RNCC: 3 | RNVC: 2
75J618002-185: RNCC: 7 | RNVC: 2

2 Mar 1990

3040-01-316-0568
Counterbalance Weight

013160568
3755-8: RNCC: 3 | RNVC: 2
3755-8: RNCC: 5 | RNVC: 2
3040PL1014820: RNCC: 6 | RNVC: 9

2 Mar 1990

3040-01-316-7287
Rigid Connecting Link

013167287
4066827: RNCC: 3 | RNVC: 2
4066827: RNCC: 5 | RNVC: 2
3040PL0668538: RNCC: 6 | RNVC: 9

14 Mar 1990

3040-01-317-5328
Shouldered Shaft

013175328
3599-096: RNCC: 3 | RNVC: 2
3599-096: RNCC: 5 | RNVC: 2
3599-096: RNCC: 5 | RNVC: 9

31 Mar 1990

3040-01-318-3719
Spur Gearshaft

013183719
3603685-2: RNCC: 3 | RNVC: 2

17 Apr 1990

3040-01-319-1009
Bell Crank

013191009
11450866-1: RNCC: 3 | RNVC: 2

1 May 1990

3040-01-319-2790
Control Cam

013192790
738032-31: RNCC: 3 | RNVC: 2

4 May 1990

3040-01-319-1485
Counterbalance Weight

013191485
4069003: RNCC: 3 | RNVC: 2

2 May 1990

3040-01-319-1255
Counterbalance Weight

013191255
4068998: RNCC: 3 | RNVC: 2

2 May 1990

3040-01-320-1527
Spur Gearshaft

013201527
2111007-210: RNCC: 3 | RNVC: 2

19 May 1990

3040-01-320-8769
Rigid Connecting Link

013208769
4075580-01: RNCC: 3 | RNVC: 2
3040PL0668596: RNCC: 6 | RNVC: 9

5 Jun 1990

3040-01-320-9432
Breather

013209432
P48328: RNCC: 3 | RNVC: 9
R431001598: RNCC: 5 | RNVC: 9

6 Jun 1990

3040-01-321-2286
Body Hub

013212286
1858767: RNCC: 3 | RNVC: 2

13 Jun 1990

3040-01-322-0023
Linear Actuating Cylinder Assembly

013220023
707-4750: RNCC: 3 | RNVC: 2
707-4750: RNCC: 3 | RNVC: 9
600-E-2146: RNCC: 5 | RNVC: 9

27 Jun 1990

3040-01-322-0986
Linear Actuating Cylinder Assembly

013220986
503360 AND 30728: RNCC: 3 | RNVC: 2
501163: RNCC: 5 | RNVC: 9
503360: RNCC: 5 | RNVC: 9
503360 AND 30728: RNCC: 5 | RNVC: 9
503361: RNCC: 5 | RNVC: 9

28 Jun 1990

3040-01-322-5822
Rigid Connecting Link

013225822
LJ1844: RNCC: 3 | RNVC: 2
H-2878 PIECE 58: RNCC: 5 | RNVC: 2

10 Jul 1990

3040-01-322-6306
Control Cam

013226306
3037-840: RNCC: 3 | RNVC: 2

11 Jul 1990

3040-01-323-1752
Shouldered Shaft

013231752
9341M62P01: RNCC: 3 | RNVC: 2

23 Jul 1990

3040-01-323-9122
Shouldered Shaft

013239122
1363M95P01: RNCC: 3 | RNVC: 2

5 Aug 1990

3040-01-324-2097
Spur Gearshaft

013242097
L1800183-017: RNCC: 3 | RNVC: 2
L1800183-017: RNCC: 5 | RNVC: 2

11 Aug 1990

3040-01-324-4438
Spur Gearshaft

013244438
1363M93P01: RNCC: 3 | RNVC: 2

19 Aug 1990

3040-01-324-7953
Shouldered Shaft

013247953
12553519: RNCC: 3 | RNVC: 2

22 Aug 1990

3040-01-325-2356
Straight Shaft

013252356
SW28444: RNCC: 3 | RNVC: 2
3040013252356: RNCC: 6 | RNVC: 9

31 Aug 1990

3040-01-328-0410
Shouldered Shaft

013280410
21E47-2: RNCC: 3 | RNVC: 2
21E47-2: RNCC: 5 | RNVC: 2
21E47-1: RNCC: E | RNVC: 8

26 Oct 1990

3040-01-328-3045
Shaft Retaining Plate

013283045
SK-6362-3 PIECE 2: RNCC: 3 | RNVC: 2
SK-6362-23 PIECE 2: RNCC: 5 | RNVC: 9

30 Oct 1990

3040-01-328-3279
Rigid Connecting Link

013283279
4077912: RNCC: 3 | RNVC: 2
4077912: RNCC: 5 | RNVC: 2
3040PL0669144: RNCC: 6 | RNVC: 9

30 Oct 1990

3040-01-328-8245
Bell Crank

013288245
4F54358-104B: RNCC: 3 | RNVC: 2
4F54358-104B: RNCC: 5 | RNVC: 9

7 Nov 1990

3040-01-331-0618
Linear Actuating Cylinder Piston

013310618
1D94410-001: RNCC: 3 | RNVC: 2
1130E15 PC17: RNCC: 5 | RNVC: 2

13 Dec 1990

3040-01-332-0074
Linear Actuating Cylinder Assembly Parts Kit

013320074
RE25151: RNCC: 3 | RNVC: 2
RE25151: RNCC: 5 | RNVC: 2
RE25151: RNCC: 5 | RNVC: 9

31 Dec 1990

3040-01-333-0541
Rigid Connecting Link

013330541
209-001-079-103: RNCC: 3 | RNVC: 2

21 Jan 1991

3040-01-333-2997
Remote Control Lever

013332997
UN0140: RNCC: 3 | RNVC: 2
701-149728-52: RNCC: 5 | RNVC: 9

30 Jan 1991

3040-01-336-8209
Mechanical Drive Housing

013368209
8928530: RNCC: 3 | RNVC: 2
2GH665: RNCC: 5 | RNVC: 2
2GH665: RNCC: 5 | RNVC: 9

3 Apr 1991

3040-01-337-4381
Body Hub

013374381
8922521: RNCC: 3 | RNVC: 2

14 Apr 1991

3040-01-337-7428
Linear Actuating Cylinder Assembly

013377428
ABP N83 318031: RNCC: 3 | RNVC: 2
80.618.00.009: RNCC: 5 | RNVC: 9
ABP N83 318093: RNCC: 5 | RNVC: 9
BOA/97847: RNCC: 5 | RNVC: 9
640015: RNCC: 5 | RNVC: 9

21 Apr 1991

3040-01-338-2363
Manual Control Lever

013382363
1318417: RNCC: 3 | RNVC: 2
1318417: RNCC: 5 | RNVC: 9

28 Apr 1991

3040-01-338-2237
Shouldered Shaft

013382237
82403617: RNCC: 3 | RNVC: 9
82403617: RNCC: 5 | RNVC: 2
82403617: RNCC: 5 | RNVC: 2
82403617: RNCC: 5 | RNVC: 2
82403617: RNCC: 5 | RNVC: 2
82403617: RNCC: 5 | RNVC: 9

28 Apr 1991

3040-01-338-4578
Spur Gearshaft

013384578
167C2976-2: RNCC: 3 | RNVC: 2
167C2976: RNCC: D | RNVC: 9

4 May 1991

3040-01-338-4434
Shouldered Shaft

013384434
1843710: RNCC: 3 | RNVC: 2
1843710: RNCC: 5 | RNVC: 9

3 May 1991

3040-01-338-7606
Helical Gearshaft

013387606
1836480: RNCC: 3 | RNVC: 2
1836480: RNCC: 5 | RNVC: 9

10 May 1991

3040-01-340-1473
Linear Actuating Cylinder Cap

013401473
MA-977: RNCC: 3 | RNVC: 2

10 Jun 1991

3040-01-340-1609
Rigid Connecting Link

013401609
236710-1: RNCC: 3 | RNVC: 2
236710-1: RNCC: 5 | RNVC: 1
236710-1: RNCC: 5 | RNVC: 9

10 Jun 1991

3040-01-341-0143
Counterbalance Weight

013410143
2301021: RNCC: 3 | RNVC: 9
AS44522-070: RNCC: 5 | RNVC: 2
AS44522-070: RNCC: 5 | RNVC: 9
AS44522-070: RNCC: 5 | RNVC: 9
AS44522-070: RNCC: 5 | RNVC: 9

23 Jun 1991

3040-01-341-2340
Piston Ring

013412340
T-560-0330-001: RNCC: 3 | RNVC: 2
60833AX: RNCC: 5 | RNVC: 2
60833AX: RNCC: 7 | RNVC: 9

26 Jun 1991

3040-01-341-1630
Brake Backing Plate

013411630
8-005-703-04: RNCC: 3 | RNVC: 2
8-005-7: RNCC: 3 | RNVC: 9
N1-087-602-B PC 5: RNCC: 5 | RNVC: 9

25 Jun 1991

3040-01-341-4989
Shouldered Shaft

013414989
6547C834-1: RNCC: 3 | RNVC: 2
6547C834: RNCC: D | RNVC: 9

1 Jul 1991

3040-01-341-5177
Rigid Connecting Link

013415177
206378: RNCC: 3 | RNVC: 2

1 Jul 1991

3040-01-342-8807
Bell Crank

013428807
A230287: RNCC: 3 | RNVC: 2
A240285 FIND 3: RNCC: 5 | RNVC: 2
A230287: RNCC: 5 | RNVC: 9
A240285: RNCC: D | RNVC: 9

31 Jul 1991

3040-01-343-8951
Housing Adapter

013438951
74A733120-2011: RNCC: 3 | RNVC: 2
3930AS713-1: RNCC: 5 | RNVC: 2
74A733120-2011: RNCC: 5 | RNVC: 2
74A733120-2011: RNCC: 5 | RNVC: 2
74A733120-2011: RNCC: 5 | RNVC: 2
3930AS713-1: RNCC: 5 | RNVC: 2
3930AS713-1: RNCC: 5 | RNVC: 2
3930AS713-1: RNCC: 5 | RNVC: 2
10107270: RNCC: 6 | RNVC: 9
3930AS713-1: RNCC: C | RNVC: 1

19 Aug 1991

3040-01-343-8952
Housing Adapter

013438952
74A733120-2012: RNCC: 3 | RNVC: 2
74A733120-2012: RNCC: 5 | RNVC: 2
3930AS713-2: RNCC: 5 | RNVC: 2
74A733120-2012: RNCC: 5 | RNVC: 2
10107272: RNCC: 6 | RNVC: 9

19 Aug 1991

3040-01-344-3978
Controllable Swashplate

013443978
741720: RNCC: 3 | RNVC: 2

28 Aug 1991

3040-01-345-5700
Shouldered Axle

013455700
1836400 U: RNCC: 3 | RNVC: 2
1836400 U: RNCC: 5 | RNVC: 9

21 Sep 1991

3040-01-348-2405
Rigid Connecting Link

013482405
4F54178-143B: RNCC: 3 | RNVC: 2
4F54178-143: RNCC: 5 | RNVC: 2
4F54178-143B: RNCC: 5 | RNVC: 9

6 Nov 1991

3040-01-348-9526
Shouldered Shaft

013489526
109183: RNCC: 3 | RNVC: 2
10107271: RNCC: 6 | RNVC: 9

19 Nov 1991

3040-01-349-7824
Shouldered Shaft

013497824
5-227 ITEM 15 5-39MIL1-1003: RNCC: 3 | RNVC: 2
5-39MIL1-1003-15: RNCC: 5 | RNVC: 2
5-39MIL1-1003-15: RNCC: 5 | RNVC: 9
5-227: RNCC: D | RNVC: 9

4 Dec 1991

3040-01-350-3835
Shouldered Shaft

013503835
3167332-5: RNCC: 3 | RNVC: 2
3167332: RNCC: 5 | RNVC: 1
3167332-5: RNCC: 5 | RNVC: 2
10107273: RNCC: 6 | RNVC: 9

14 Dec 1991

3040-01-350-3953
Bevel Gearshaft

013503953
1W0610: RNCC: 3 | RNVC: 2
1W610: RNCC: 5 | RNVC: 2

14 Dec 1991

3040-01-349-7394
Mechanical Drive Housing

013497394
12918135: RNCC: 3 | RNVC: 2
12918135: RNCC: 5 | RNVC: 9

3 Dec 1991

3040-01-350-9200
Cover And Grid Assy

013509200
0706740: RNCC: 3 | RNVC: 2
246667: RNCC: 5 | RNVC: 9

25 Dec 1991

3040-01-351-1611
Linear Actuating Cylinder Assembly Parts Kit

013511611
PMCK22000: RNCC: 3 | RNVC: 2

1 Jan 1992

3040-01-351-5916
Shaft Collar

013515916
424478-1: RNCC: 3 | RNVC: 2
424478: RNCC: D | RNVC: 9

11 Jan 1992

3040-01-351-5957
Control Cable Assembly

013515957
38013-003-78IN: RNCC: 3 | RNVC: 9
38013-003-78IN: RNCC: 5 | RNVC: 2
5104955 ITEM 30: RNCC: 5 | RNVC: 2
5104955: RNCC: D | RNVC: 9

11 Jan 1992

3040-01-352-9162
Push-Pull Control Assembly

013529162
301947-286(23FT): RNCC: 3 | RNVC: 2
CCX63323: RNCC: 5 | RNVC: 2
301947-003-23FT: RNCC: 5 | RNVC: 9

1 Feb 1992

3040-01-353-6613
Control Cam

013536613
0031-2077: RNCC: 3 | RNVC: 2
001-ALUM ACTUATOR: RNCC: 5 | RNVC: 2
001-HATCH-1524-H-AALR FIND 10: RNCC: 5 | RNVC: 2
001-HATCH-1524-H-AALR: RNCC: D | RNVC: 9

14 Feb 1992

3040-01-354-0534
Spur Gearshaft

013540534
803-5959307-X-065: RNCC: 3 | RNVC: 2
803-5959307: RNCC: D | RNVC: 9

21 Feb 1992

3040-01-354-8887
Rigid Connecting Link

013548887
4611-555: RNCC: 3 | RNVC: 2
17B9F1112-555: RNCC: 7 | RNVC: 2

6 Mar 1992

3040-01-355-0582
Linear Actuating Cylinder Assembly

013550582
13541275: RNCC: 3 | RNVC: 2
20TR12: RNCC: 5 | RNVC: 2

11 Mar 1992

3040-01-355-7657
Straight Shaft

013557657
12553286: RNCC: 3 | RNVC: 2
12553286: RNCC: 5 | RNVC: 2
12553286: RNCC: 5 | RNVC: 2

23 Mar 1992

3040-01-357-5050
Rigid Connecting Link

013575050
17P3A1755-501: RNCC: 3 | RNVC: 2

24 Apr 1992

3040-01-357-5851
Shouldered Shaft

013575851
53X-01-147: RNCC: 3 | RNVC: 2
53X-01-147: RNCC: 5 | RNVC: 9
53X-01-147: RNCC: 5 | RNVC: 9

27 Apr 1992

3040-01-358-8691
Spur Gearshaft

013588691
16275: RNCC: 3 | RNVC: 2
5938662: RNCC: 5 | RNVC: 2
3040PL0768135: RNCC: 6 | RNVC: 9

22 May 1992

3040-01-359-9651
Linear Actuating Cylinder Assembly Parts Kit

013599651
19012-203: RNCC: 3 | RNVC: 2
19012-203: RNCC: 5 | RNVC: 9

17 Jun 1992

3040-01-360-2403
Straight Shaft

013602403
1220D0382: RNCC: 3 | RNVC: 9
1220D0382: RNCC: C | RNVC: 1

20 Jun 1992

3040-01-360-5989
Linear Actuating Cylinder Assembly Parts Kit

013605989
57304834: RNCC: 3 | RNVC: 2
855017P0803: RNCC: 5 | RNVC: 9

28 Jun 1992

3040-01-361-0614
Mechanical Drive Housing

013610614
00-017019: RNCC: 3 | RNVC: 2
2FW842: RNCC: 5 | RNVC: 2
00-017019: RNCC: 5 | RNVC: 9

8 Jul 1992

3040-01-362-3485
Piston Ring Set

013623485
S32152-343-99 PH: RNCC: 3 | RNVC: 2
A78093-343PH-99: RNCC: 5 | RNVC: 2
S32152-343-99 PH: RNCC: 5 | RNVC: 9
S32152: RNCC: D | RNVC: 9
A78093: RNCC: D | RNVC: 9

5 Aug 1992

3040-01-362-3508
Counterbalance Weight

013623508
186-6039: RNCC: 3 | RNVC: 2
186-6039: RNCC: 5 | RNVC: 2

5 Aug 1992

3040-01-363-1949
Control

013631949
SM-A-803686-1: RNCC: 3 | RNVC: 2

26 Aug 1992

3040-01-362-1838
Linear Actuating Cylinder

013621838
1771AS402-1: RNCC: 3 | RNVC: 2
1771AS402-1: RNCC: 5 | RNVC: 2
53101-00: RNCC: 5 | RNVC: 9
1771AS402: RNCC: 7 | RNVC: 2

1 Aug 1992

3040-01-364-2195
Remote Control Lever

013642195
14-017: RNCC: 3 | RNVC: 2
14-017: RNCC: 3 | RNVC: 9

14 Sep 1992

3040-01-364-2259
Droop Control Locking Cap

013642259
20355: RNCC: 3 | RNVC: 2
20355: RNCC: 5 | RNVC: 9
20355: RNCC: 5 | RNVC: 9

14 Sep 1992

3040-01-365-2729
Nonrotating Shaft Eye Bracket

013652729
MBEU147624: RNCC: 3 | RNVC: 2
MBEU147624: RNCC: 5 | RNVC: 2

4 Oct 1992

3040-01-365-9155
Shouldered Shaft

013659155
803-5959218 PIECE 45: RNCC: 3 | RNVC: 2

19 Oct 1992

3040-01-366-7221
Shaft Collar

013667221
6086210: RNCC: 3 | RNVC: 2

1 Nov 1992

3040-01-366-7250
Mechanical Drive Housing

013667250
6086274: RNCC: 3 | RNVC: 2

1 Nov 1992

3040-01-366-7315
Worm Shaft

013667315
12950926: RNCC: 3 | RNVC: 2

1 Nov 1992

3040-01-368-7671
Linear Actuating Cylinder Assembly

013687671
126-900-065: RNCC: 3 | RNVC: 2
126-000-065 W/STOP: RNCC: 5 | RNVC: 9
126-000-065 W/STOP: RNCC: 5 | RNVC: 9
126-000-065/503: RNCC: 5 | RNVC: 9
126-000-065/404: RNCC: 5 | RNVC: 9

8 Dec 1992

3040-01-370-1351
Shouldered Shaft

013701351
6-689-001667: RNCC: 3 | RNVC: 2
6-689-001667: RNCC: 5 | RNVC: 2
6-689-001667: RNCC: 5 | RNVC: 2

14 Jan 1993

Load More Results