What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 118 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 118 of 300

3040-01-408-1565
Housing Adapter

014081565
23019304: RNCC: 3 | RNVC: 2
2GK850: RNCC: 5 | RNVC: 2
2GK850: RNCC: 5 | RNVC: 9

10 Feb 1995

3040-01-412-1143
Straight Shaft

014121143
B200668D044: RNCC: 3 | RNVC: 2
H200668D001 ITEM #43: RNCC: 5 | RNVC: 2
PL-H6918D001 REV A IT NO 43: RNCC: C | RNVC: 1
H200668D001: RNCC: D | RNVC: 9
200668D001: RNCC: D | RNVC: 9

11 Apr 1995

3040-01-414-0374
Shouldered Shaft Assembly

014140374
15261010-111: RNCC: 3 | RNVC: 9
15261004 FIND NO 33: RNCC: 5 | RNVC: 9
15261004: RNCC: D | RNVC: 9
15261010: RNCC: D | RNVC: 9

30 May 1995

3040-01-418-0059
Shouldered Shaft

014180059
21138-1004-1: RNCC: 3 | RNVC: 2
21138 ITEM 9: RNCC: 5 | RNVC: 9
21138: RNCC: D | RNVC: 9

18 Aug 1995

3040-01-418-0780
Shouldered Shaft

014180780
901-044-151-105: RNCC: 3 | RNVC: 2
554866: RNCC: 5 | RNVC: 9

21 Aug 1995

3040-01-418-3409
Shouldered Shaft

014183409
21129-1000-1: RNCC: 3 | RNVC: 2
21108-7: RNCC: 5 | RNVC: 9
21108: RNCC: D | RNVC: 9

24 Aug 1995

3040-01-420-7875
Rigid Connecting Link

014207875
4668595: RNCC: 3 | RNVC: 2
4668595: RNCC: 3 | RNVC: 9
4668595: RNCC: 5 | RNVC: 2

25 Oct 1995

3040-01-421-5158
Worm Shaft

014215158
300534-2: RNCC: 3 | RNVC: 2
300534-2: RNCC: 3 | RNVC: 9
901011PL FIND 7, 15 TO 1: RNCC: 5 | RNVC: 2
901011PL FIND 7, 15 TO 1: RNCC: 5 | RNVC: 9
901010-1-6-01PL FD NO 7: RNCC: C | RNVC: 1

9 Nov 1995

3040-01-421-9943
Body Hub

014219943
NW33523: RNCC: 3 | RNVC: 2

20 Nov 1995

3040-01-420-1941
Straight Shaft

014201941
21331-1003-1: RNCC: 3 | RNVC: 2
21331 FN 7: RNCC: 5 | RNVC: 9
21331: RNCC: D | RNVC: 9

11 Oct 1995

3040-01-422-8327
Spur Gearshaft

014228327
434517: RNCC: 3 | RNVC: 2
434517: RNCC: 5 | RNVC: 9
434517: RNCC: 5 | RNVC: 9
434517: RNCC: 5 | RNVC: 9

9 Dec 1995

3040-01-423-1438
Shouldered Shaft

014231438
12961274: RNCC: 3 | RNVC: 2

15 Dec 1995

3040-01-423-1779
Nonrotating Shaft Eye Bracket

014231779
12440869: RNCC: 3 | RNVC: 2
3HD813: RNCC: 5 | RNVC: 2
12440869: RNCC: 5 | RNVC: 9
3HD813: RNCC: 5 | RNVC: 9

18 Dec 1995

3040-01-423-1989
Shouldered Shaft

014231989
A-9905 TYPE 17: RNCC: 3 | RNVC: 9
10-1506-100 ITEM NO 7: RNCC: 5 | RNVC: 9
10-1506-100: RNCC: D | RNVC: 9
A-9905: RNCC: D | RNVC: 9

18 Dec 1995

3040-01-423-5739
Straight Shaft

014235739
13-3132: RNCC: 3 | RNVC: 2
6984ED84 PC 6: RNCC: 5 | RNVC: 2
13-3132: RNCC: C | RNVC: 1

3 Jan 1996

3040-01-423-8513
Shouldered Shaft Assembly

014238513
DAX16470: RNCC: 3 | RNVC: 2
12366575: RNCC: 3 | RNVC: 2

12 Jan 1996

3040-01-423-1919
Shaft Collar

014231919
114350-45340: RNCC: 3 | RNVC: 9
114350-45340: RNCC: 5 | RNVC: 2
114350-45340: RNCC: 5 | RNVC: 9
3040PL0807400: RNCC: 6 | RNVC: 9
114350-45340: RNCC: C | RNVC: 1

18 Dec 1995

3040-01-432-8468
Linear Actuating Cylinder Piston

014328468
941AS110: RNCC: 3 | RNVC: 2
941AS110: RNCC: 5 | RNVC: 2

17 Jun 1996

3040-01-432-8239
Rigid Connecting Link

014328239
7-311511130-15: RNCC: 3 | RNVC: 2
7-311511130-15: RNCC: 3 | RNVC: 9
7-311511130: RNCC: E | RNVC: 8

14 Jun 1996

3040-01-434-3371
Shouldered Shaft

014343371
211094781: RNCC: 3 | RNVC: 2
801-6406709-90: RNCC: 5 | RNVC: 2
DF331106 FIND 90: RNCC: 5 | RNVC: 9
01-6406709-90: RNCC: C | RNVC: 1
801-6406709: RNCC: D | RNVC: 9

26 Jul 1996

3040-01-434-8620
Cylinder Support

014348620
211060126: RNCC: 3 | RNVC: 2
585-6404866 FIND 10: RNCC: 5 | RNVC: 2
DF2081-216 FIND 10: RNCC: 5 | RNVC: 9
6404866: RNCC: D | RNVC: 9

9 Aug 1996

3040-01-435-0360
Mechanical Drive Housing

014350360
5-57244-3: RNCC: 3 | RNVC: 2

12 Aug 1996

3040-01-435-1718
Rigid Connecting Link

014351718
S-4127 ITEM 34: RNCC: 3 | RNVC: 2
S-4127: RNCC: D | RNVC: 9

16 Aug 1996

3040-01-424-5401
Body Hub

014245401
12420819: RNCC: 1 | RNVC: 2
12420819-001: RNCC: 3 | RNVC: 2
29511814: RNCC: 3 | RNVC: 2
12420819-001: RNCC: 5 | RNVC: 2
12420819-001: RNCC: 5 | RNVC: 2
12420819: RNCC: 5 | RNVC: 9

30 Jan 1996

3040-01-424-7381
Control Cam

014247381
211041761: RNCC: 3 | RNVC: 2
752-6406838-135: RNCC: 5 | RNVC: 2
DF1706-438#135: RNCC: 5 | RNVC: 9
6406838: RNCC: D | RNVC: 9

3 Feb 1996

3040-01-425-1062
Hydraulic Accumulator

014251062
N37216B: RNCC: 3 | RNVC: 2
N37116B: RNCC: 5 | RNVC: 9
9167778-1: RNCC: 5 | RNVC: 9
9167778: RNCC: D | RNVC: 9

12 Feb 1996

3040-01-426-2976
Straight Shaft Assembly

014262976
3141AS452-503: RNCC: 3 | RNVC: 2
3141AS452-503: RNCC: 5 | RNVC: 9
3141AS452-503: RNCC: C | RNVC: 1
3141AS452-503: RNCC: C | RNVC: 1

7 Mar 1996

3040-01-425-2830
Remote Control Lever

014252830
12386399: RNCC: 3 | RNVC: 2
12386399: RNCC: 5 | RNVC: 2
12386399: RNCC: 5 | RNVC: 2

15 Feb 1996

3040-01-428-7287
Disk Drive Unit

014287287
M32408: RNCC: 3 | RNVC: 2

1 Apr 1996

3040-01-429-8360
Hub Clamp

014298360
SPH-76-SS: RNCC: 3 | RNVC: 2
6894422: RNCC: 5 | RNVC: 1
6894422 ITEM 28: RNCC: 5 | RNVC: 2
5363388: RNCC: 5 | RNVC: 2
SP76SS: RNCC: 5 | RNVC: 9

19 Apr 1996

3040-01-429-9637
Control Cam

014299637
35735: RNCC: 3 | RNVC: 2
83792 ITEM 4: RNCC: 5 | RNVC: 9

22 Apr 1996

3040-01-436-4155
Counterbalance Weight

014364155
2196853CLF: RNCC: 3 | RNVC: 2

19 Sep 1996

3040-01-436-4902
Control Cam

014364902
68-85-10: RNCC: 3 | RNVC: 2
68-85-10: RNCC: 3 | RNVC: 9
U-1-9-31: RNCC: 5 | RNVC: 2
SXR0637 ITEM 7: RNCC: 5 | RNVC: 9
SXR0637: RNCC: D | RNVC: 9

20 Sep 1996

3040-01-439-0891
Mechanical Drive Housing

014390891
4007310: RNCC: 3 | RNVC: 2
4007532: RNCC: 3 | RNVC: 9

27 Nov 1996

3040-01-439-3876
Shaft Collar

014393876
211078776: RNCC: 3 | RNVC: 2
150-6405270 FIND 74: RNCC: 5 | RNVC: 2
DF1507-166 FIND 74: RNCC: 5 | RNVC: 9
6405270: RNCC: D | RNVC: 9

6 Dec 1996

3040-01-439-4428
Shouldered Shaft

014394428
25-12059: RNCC: 3 | RNVC: 2

9 Dec 1996

3040-01-439-6208
Brush Block

014396208
875 17201-003: RNCC: 3 | RNVC: 2
142.03-3: RNCC: 5 | RNVC: 9
800.7.7100-1 IT 34: RNCC: 5 | RNVC: 9
800.7.7100-1 IT: RNCC: 5 | RNVC: 9

13 Dec 1996

3040-01-440-6098
Linear Actuating Cylinder

014406098
6623296: RNCC: 3 | RNVC: 2
6623296: RNCC: 5 | RNVC: 9
6615014: RNCC: 5 | RNVC: 9

21 Jan 1997

3040-01-441-4385
Spur Gearshaft

014414385
83631: RNCC: 3 | RNVC: 2
83913-1 IT45: RNCC: 5 | RNVC: 9

12 Feb 1997

3040-01-442-9354
Friction Lining

014429354
7115382: RNCC: 3 | RNVC: 2
7115382: RNCC: 5 | RNVC: 9

27 Mar 1997

3040-01-445-5568
Shaft-Hub Clamp-Bushing Assembly

014455568
SD 1-7/8: RNCC: 3 | RNVC: 2

5 Jun 1997

3040-01-445-7188
Shaft Collar

014457188
123-4403556 PIECE 39: RNCC: 3 | RNVC: 2
1502-100 PIECE 39: RNCC: 5 | RNVC: 9
123-4403556 PIECE 39: RNCC: 5 | RNVC: 9
4403556: RNCC: D | RNVC: 9

10 Jun 1997

3040-01-451-3799
Straight Shaft

014513799
DU-368: RNCC: 3 | RNVC: 2
MANUAL P5637 ITEM 72: RNCC: 5 | RNVC: 2
DU-368: RNCC: C | RNVC: 1

15 Dec 1997

3040-01-451-6005
Linear Actuating Cylinder Assembly

014516005
100-6174: RNCC: 3 | RNVC: 2

22 Dec 1997

3040-01-452-6593
Rigid Connecting Link

014526593
803-6397269 PC59 ZINC COATED: RNCC: 3 | RNVC: 2
8100-1251-0307 PC NO 85: RNCC: 5 | RNVC: 2
167-6926191: RNCC: D | RNVC: 9
803-6397269: RNCC: D | RNVC: 9

3 Feb 1998

3040-01-452-7469
Rigid Connecting Link

014527469
167-6926191 PIECE36 ZINC COATED: RNCC: 3 | RNVC: 2
167-6926191 PC3: RNCC: C | RNVC: 1

5 Feb 1998

3040-01-454-2270
Push-Pull Control Assembly

014542270
C1615Z-25 FT: RNCC: 3 | RNVC: 2
C1615Z: RNCC: D | RNVC: 9

24 Mar 1998

3040-01-454-2307
Push-Pull Control Assembly

014542307
C1615Z-50 FT: RNCC: 3 | RNVC: 2
C1615Z: RNCC: D | RNVC: 9

24 Mar 1998

3040-01-454-3531
Linear Actuating Cylinder Assembly

014543531
A1-3280Q9819: RNCC: 3 | RNVC: 2
A1-3280K9449: RNCC: 5 | RNVC: 9

27 Mar 1998

3040-01-454-8195
Shouldered Shaft

014548195
G202690-1: RNCC: 3 | RNVC: 2
G202690-1: RNCC: 5 | RNVC: 2
G202690-1: RNCC: 5 | RNVC: 9
G202690: RNCC: D | RNVC: 9

14 Apr 1998

3040-01-454-9203
Straight Shaft

014549203
00992E638 PC 1: RNCC: 3 | RNVC: 2
00992E638 PC 1: RNCC: 3 | RNVC: 9
00992E635-1: RNCC: C | RNVC: 1
00992E638: RNCC: D | RNVC: 9

16 Apr 1998

3040-01-454-9225
Rigid Connecting Link

014549225
803-6397269 ITEM 48: RNCC: 3 | RNVC: 2
803-6397268 PC75 ZINC PLATED: RNCC: 5 | RNVC: 9
167-6926191 PC64 ZINC PLATED: RNCC: 5 | RNVC: 9
803-6397269: RNCC: D | RNVC: 9

16 Apr 1998

3040-01-455-6943
Quick Chain Link

014556943
S0160-0004: RNCC: 3 | RNVC: 2
7012607-1: RNCC: 5 | RNVC: 2
S0160-B004: RNCC: 5 | RNVC: 9
S0160-B004: RNCC: 5 | RNVC: 9
7012607: RNCC: D | RNVC: 9

12 May 1998

3040-01-455-6635
Brake Equal Adapter

014556635
12386609: RNCC: 3 | RNVC: 2

11 May 1998

3040-01-457-1059
Rigid Connecting Link

014571059
12976347: RNCC: 3 | RNVC: 2

11 Jul 1998

3040-01-372-6397
Worm Shaft

013726397
111-218-180-430-002: RNCC: 3 | RNVC: 2
D430-4-12-487 ITEM 12: RNCC: 5 | RNVC: 2
111-218-180-430-002: RNCC: 5 | RNVC: 2

15 Mar 1993

3040-01-373-9982
Straight Shaft

013739982
7709312: RNCC: 3 | RNVC: 2

14 Apr 1993

3040-01-374-3025
Manual Control Lever

013743025
12379349: RNCC: 3 | RNVC: 2
12379349: RNCC: 5 | RNVC: 2

20 Apr 1993

3040-01-375-8128
Mechanical Drive Housing

013758128
70351-38116-043: RNCC: 3 | RNVC: 2
70351-38116-042: RNCC: 5 | RNVC: 9
70351-38116: RNCC: D | RNVC: 9

21 May 1993

3040-01-375-8093
Shaft Collar

013758093
4999-9060: RNCC: 3 | RNVC: 2
23488.25 ITEM 95: RNCC: 5 | RNVC: 2
23488.682-1: RNCC: 5 | RNVC: 9
23488.25: RNCC: D | RNVC: 9

21 May 1993

3040-01-377-2861
Control Cam

013772861
5361663 ITEM 121: RNCC: 3 | RNVC: 2
5361663 ITEM 122 AND 123: RNCC: 5 | RNVC: 2
5361663: RNCC: D | RNVC: 9

12 Jul 1993

3040-01-377-4048
Shaft Collar

013774048
M900737: RNCC: 3 | RNVC: 2
900737: RNCC: 5 | RNVC: 2

15 Jul 1993

3040-01-377-7096
Flexible Drive Shaft

013777096
847683: RNCC: 3 | RNVC: 2
847655PC1: RNCC: 5 | RNVC: 2
847655: RNCC: D | RNVC: 9

23 Jul 1993

3040-01-378-1781
Bell Crank

013781781
6404326-18: RNCC: 3 | RNVC: 2
6404326: RNCC: D | RNVC: 9

12 Aug 1993

3040-01-378-3794
Piston Ring

013783794
ABM21331-2: RNCC: 3 | RNVC: 2

12 Aug 1993

3040-01-379-2013
Shaft Retaining Plate

013792013
2046-0003: RNCC: 3 | RNVC: 2
D2046: RNCC: D | RNVC: 9

29 Aug 1993

3040-01-379-3067
Shaft Retaining Plate

013793067
2046-0004: RNCC: 3 | RNVC: 2
2046: RNCC: 5 | RNVC: 9
D-2046: RNCC: D | RNVC: 9

30 Aug 1993

3040-01-379-3068
Shaft Retaining Plate

013793068
2046-006: RNCC: 3 | RNVC: 2
2046-0006: RNCC: C | RNVC: 1
D2046: RNCC: D | RNVC: 9

30 Aug 1993

3040-01-382-9654
Linear Actuating Cylinder Assembly

013829654
89156922: RNCC: 3 | RNVC: 9
8707-C058: RNCC: 5 | RNVC: 9

13 Nov 1993

3040-01-383-2256
Remote Control Lever

013832256
12446233: RNCC: 3 | RNVC: 2
12389492: RNCC: 5 | RNVC: 9

19 Nov 1993

3040-01-383-5157
Mechanically Actuated Spindle

013835157
167 6603239 FIND N0. DACC-A16: RNCC: 3 | RNVC: 2
C424-2201 FIND N0. DACC-A16: RNCC: 5 | RNVC: 2
167 6603239: RNCC: D | RNVC: 9
C424-2201: RNCC: D | RNVC: 9

25 Nov 1993

3040-01-386-8309
Multiple Disk Brake

013868309
2D1-1205: RNCC: 3 | RNVC: 2

16 Feb 1994

3040-01-386-6623
Counterbalance Weight

013866623
236B2275-P001: RNCC: 3 | RNVC: 9
963E440 ITEM 52: RNCC: 5 | RNVC: 9
236B2275-P001: RNCC: 5 | RNVC: 9
236B2275-P001: RNCC: C | RNVC: 1
963E440: RNCC: D | RNVC: 9

10 Feb 1994

3040-01-387-5454
Rigid Connecting Link

013875454
74A501230-1003: RNCC: 3 | RNVC: 2
74A501230-1003: RNCC: 5 | RNVC: 2
74A501230-1003: RNCC: 5 | RNVC: 2
74A501230-1003: RNCC: 5 | RNVC: 2
74A501230-1003: RNCC: 5 | RNVC: 9
10107293: RNCC: 6 | RNVC: 9

7 Mar 1994

3040-01-385-9064
Manual Control Lever Assembly

013859064
KD 64348-12: RNCC: 3 | RNVC: 2
220270: RNCC: 5 | RNVC: 9
220270: RNCC: 5 | RNVC: 9

21 Jan 1994

3040-01-389-0507
Push-Pull Control Assembly Parts Kit

013890507
2046-0901: RNCC: 3 | RNVC: 2

14 Apr 1994

3040-01-389-7826
Shaft Collar

013897826
12418543-001: RNCC: 3 | RNVC: 2
12418543-001: RNCC: 5 | RNVC: 2
12418543-001: RNCC: 5 | RNVC: 2
12418543: RNCC: D | RNVC: 9

3 May 1994

3040-01-389-8992
Straight Shaft

013898992
5C1-04481: RNCC: 3 | RNVC: 2
5D3-03564 ITEM 39: RNCC: 5 | RNVC: 2

6 May 1994

3040-01-388-2839
Shouldered Shaft Assembly

013882839
6351090-1: RNCC: 3 | RNVC: 2

25 Mar 1994

3040-01-389-8967
Extension Shaft

013898967
G276872-1: RNCC: 3 | RNVC: 2
G276872-1: RNCC: 5 | RNVC: 2
G276872-1: RNCC: 5 | RNVC: 9

6 May 1994

3040-01-391-6075
Bevel Gearshaft

013916075
10048070: RNCC: 3 | RNVC: 2

15 Jun 1994

3040-01-392-4702
Rigid Connecting Link

013924702
12254: RNCC: 3 | RNVC: 2
12254: RNCC: 5 | RNVC: 9
12254: RNCC: 5 | RNVC: 9

29 Jun 1994

3040-01-396-1396
Shoe Brake Parts Kit

013961396
M12KY203: RNCC: 3 | RNVC: 9

14 Sep 1994

3040-01-396-1185
Nonaircraft Mechanical Actuator

013961185
12438895: RNCC: 3 | RNVC: 2

13 Sep 1994

3040-01-396-7816
Shaft Retaining Plate

013967816
211015320: RNCC: 3 | RNVC: 2
6404316 FIND 11: RNCC: 5 | RNVC: 2
566-6404316 FIND 11: RNCC: 5 | RNVC: 2

23 Sep 1994

3040-01-397-5265
Shouldered Shaft

013975265
3331133-1: RNCC: 3 | RNVC: 2
3331133-1: RNCC: 5 | RNVC: 2
3331133-1: RNCC: 5 | RNVC: 9
3331133: RNCC: D | RNVC: 9

13 Oct 1994

3040-01-398-5586
Linear Actuating Cylinder Assembly

013985586
240008: RNCC: 3 | RNVC: 2
240008: RNCC: C | RNVC: 1

5 Nov 1994

3040-01-400-6063
Piston Rod Guide

014006063
21212-1008-1: RNCC: 3 | RNVC: 2
21212-8: RNCC: 5 | RNVC: 9
21212-1008: RNCC: 5 | RNVC: 9
21212: RNCC: D | RNVC: 9

16 Dec 1994

3040-01-407-0998
Shaft Retaining Plate

014070998
585-6404851 ITEM 55: RNCC: 3 | RNVC: 2
211059913: RNCC: 3 | RNVC: 2
211059913: RNCC: 5 | RNVC: 2
585-6409367 ITEM 35: RNCC: 5 | RNVC: 2
6404851: RNCC: D | RNVC: 9
585-6404851: RNCC: D | RNVC: 9

20 Jan 1995

3040-01-409-0079
Straight Shaft

014090079
211064645: RNCC: 3 | RNVC: 2
585-6406620-55: RNCC: 5 | RNVC: 2
585-6406620: RNCC: D | RNVC: 9

3 Mar 1995

3040-01-410-8074
Shaft Retaining Plate

014108074
12347085-2: RNCC: 3 | RNVC: 2

12 Mar 1995

3040-01-411-1257
Retaining Collar

014111257
1135E30-005: RNCC: 3 | RNVC: 1
1135E30-005: RNCC: 5 | RNVC: 9
1135E73FN008: RNCC: D | RNVC: 9

17 Mar 1995

3040-01-412-1127
Shouldered Shaft

014121127
12364780: RNCC: 3 | RNVC: 2
12364780: RNCC: 5 | RNVC: 2

11 Apr 1995

3040-01-411-4869
Spline Adapter

014114869
145DS524-1: RNCC: 3 | RNVC: 2
145DS524-1: RNCC: 5 | RNVC: 2
A11392: RNCC: 5 | RNVC: 2

25 Mar 1995

3040-01-412-6839
Linear Actuating Cylinder Head

014126839
001-9223-968: RNCC: 3 | RNVC: 2
1Q8901-0010-01A ITEM 1: RNCC: 5 | RNVC: 9
1Q8901-0010-01A: RNCC: D | RNVC: 9

26 Apr 1995

3040-01-412-8189
Linear Actuating Cylinder

014128189
4B995D-10: RNCC: 3 | RNVC: 9

28 Apr 1995

3040-01-413-5994
Remote Control Lever

014135994
12380506: RNCC: 3 | RNVC: 2

17 May 1995

3040-01-413-8234
Rigid Connecting Link

014138234
RCSK-14737 ITEM 15: RNCC: 3 | RNVC: 2
50061-1: RNCC: 5 | RNVC: 2
RCSK-14737 ITEM 15: RNCC: 5 | RNVC: 2
59343 ITEM 15: RNCC: 5 | RNVC: 9
RCSK-14737-C: RNCC: 7 | RNVC: 1
RCSK-14737-C: RNCC: 7 | RNVC: 1
59343 ITEM 15: RNCC: C | RNVC: 1

23 May 1995

3040-01-414-0363
Shouldered Shaft

014140363
21136-1004-1: RNCC: 3 | RNVC: 2
21136-10: RNCC: 5 | RNVC: 9
21136-1004: RNCC: 5 | RNVC: 9
21136 FIND NO 10: RNCC: 5 | RNVC: 9
21808 FIND 10: RNCC: C | RNVC: 1
21136: RNCC: D | RNVC: 9

30 May 1995

3040-01-416-3240
Piston Ring Set

014163240
960145-93: RNCC: 3 | RNVC: 2
960145-93: RNCC: 5 | RNVC: 2

17 Jul 1995

3040-01-417-2726
Rigid Connecting Link

014172726
SW33962: RNCC: 3 | RNVC: 2
SW33437: RNCC: 5 | RNVC: 9

3 Aug 1995

3040-01-417-2756
Worm Shaft

014172756
320E37: RNCC: 3 | RNVC: 2

3 Aug 1995

3040-01-417-2805
Breather

014172805
BL P 160 S 10 W 2.0: RNCC: 3 | RNVC: 2
D-411-089 ITEM DR: RNCC: 5 | RNVC: 2
BLS-161-10-1.0: RNCC: 5 | RNVC: 9

3 Aug 1995

3040-01-417-6225
Shouldered Shaft

014176225
21191-1003-1: RNCC: 3 | RNVC: 2
21191-6: RNCC: 5 | RNVC: 9
21191-1003: RNCC: D | RNVC: 9

10 Aug 1995

3040-01-418-4066
Shouldered Shaft

014184066
12366654: RNCC: 3 | RNVC: 2
B713H: RNCC: 5 | RNVC: 9

25 Aug 1995

3040-01-418-0057
Shouldered Shaft

014180057
21138-1003-1: RNCC: 3 | RNVC: 2
21138 ITEM 8: RNCC: 5 | RNVC: 9
21138: RNCC: D | RNVC: 9

18 Aug 1995

3040-01-418-5796
Brake Band And Lining

014185796
278-1039-802: RNCC: 3 | RNVC: 2
278 1039-802: RNCC: 5 | RNVC: 2
278 0163-802: RNCC: 5 | RNVC: 9
BULTN S1,A1-8.3 ITEM 8: RNCC: 5 | RNVC: 9
PL178-0373-806 ITEM 008C: RNCC: 5 | RNVC: 9
278-1039-802: RNCC: 5 | RNVC: 9
278 0163-802: RNCC: C | RNVC: 1

30 Aug 1995

3040-01-418-9500
Rigid Connecting Link

014189500
4668655: RNCC: 3 | RNVC: 9
4668655: RNCC: 5 | RNVC: 2
4668655: RNCC: C | RNVC: 1

8 Sep 1995

3040-01-420-1887
Shouldered Shaft

014201887
21909: RNCC: 3 | RNVC: 2
5714291: RNCC: 5 | RNVC: 2
21909: RNCC: 5 | RNVC: 9
3040PL0767561: RNCC: 6 | RNVC: 9

11 Oct 1995

3040-01-421-1209
Manual Control Lever

014211209
74390800: RNCC: 3 | RNVC: 2
67A314D105-5: RNCC: 7 | RNVC: 2

2 Nov 1995

3040-01-421-9789
Shouldered Shaft

014219789
12961180: RNCC: 3 | RNVC: 2

18 Nov 1995

3040-01-422-0080
Dovetail Block

014220080
903-5912047PC12: RNCC: 3 | RNVC: 2
903-5912047: RNCC: D | RNVC: 9

20 Nov 1995

3040-01-422-4102
Straight Shaft

014224102
29510181: RNCC: 3 | RNVC: 2
29510181: RNCC: 8 | RNVC: 2

1 Dec 1995

3040-01-422-7124
Straight Shaft

014227124
28234: RNCC: 3 | RNVC: 9
28234: RNCC: 5 | RNVC: 2
28234: RNCC: 5 | RNVC: 2

6 Dec 1995

3040-01-422-4193
Body Hub

014224193
E8DR130-0360: RNCC: 3 | RNVC: 2
E8DR130-0360: RNCC: 5 | RNVC: 9

1 Dec 1995

3040-01-422-7125
Shouldered Shaft Assembly

014227125
28316: RNCC: 3 | RNVC: 9
28316: RNCC: 5 | RNVC: 2
28316: RNCC: 5 | RNVC: 2

6 Dec 1995

3040-01-422-7287
Shaft Collar

014227287
511L343YYPN43: RNCC: 3 | RNVC: 9
B684Y0157-1: RNCC: 5 | RNVC: 9
B684Y0157-1: RNCC: C | RNVC: 1
B684Y0157-1: RNCC: C | RNVC: 1
B684Y0157-1: RNCC: D | RNVC: 9

7 Dec 1995

3040-01-423-8676
Linear Actuating Cylinder Assembly

014238676
22-07169: RNCC: 3 | RNVC: 9
22-07169: RNCC: 5 | RNVC: 2
589-6953108: RNCC: 5 | RNVC: 9

12 Jan 1996

3040-01-424-2569
Shouldered Shaft

014242569
3171724-1: RNCC: 3 | RNVC: 2

24 Jan 1996

3040-01-432-9480
Linear Actuating Cylinder Assembly Parts Kit

014329480
86581670: RNCC: 3 | RNVC: 2
SML-41669: RNCC: 5 | RNVC: 9
SML-37985: RNCC: 5 | RNVC: 9

18 Jun 1996

3040-01-432-4452
Piston Ring

014324452
53775-003520: RNCC: 3 | RNVC: 2

6 Jun 1996

3040-01-435-6207
Shouldered Shaft

014356207
211036217: RNCC: 3 | RNVC: 2
211036217: RNCC: 3 | RNVC: 2
801-6405530 FIND 1: RNCC: 5 | RNVC: 2
801-6405530-1: RNCC: 5 | RNVC: 2
6405530: RNCC: D | RNVC: 9

29 Aug 1996

3040-01-435-8910
Spur Gearshaft

014358910
102-218-020-428-000: RNCC: 3 | RNVC: 2
SM0958 IT 12: RNCC: 5 | RNVC: 2
SM0958-12: RNCC: 5 | RNVC: 2
SM0958: RNCC: D | RNVC: 9

5 Sep 1996

3040-01-435-3020
Shouldered Shaft Assembly

014353020
400-533879PC26: RNCC: 3 | RNVC: 2
400-533900PC26: RNCC: 3 | RNVC: 2
803-5002391-10: RNCC: 3 | RNVC: 2
5002391-10: RNCC: C | RNVC: 1
5002391: RNCC: D | RNVC: 9
533879: RNCC: D | RNVC: 9
533900: RNCC: D | RNVC: 9

20 Aug 1996

3040-01-424-2194
Shouldered Shaft

014242194
02XB35016401: RNCC: 3 | RNVC: 2
CAT19.019 IT77: RNCC: 5 | RNVC: 9
PL19XL5353558CR IT77: RNCC: 5 | RNVC: 9

24 Jan 1996

3040-01-424-6185
Rigid Connecting Link

014246185
40699: RNCC: 3 | RNVC: 2
40699N: RNCC: 5 | RNVC: 2

1 Feb 1996

3040-01-424-9816
Linear Actuating Cylinder Assembly

014249816
EE110816B: RNCC: 3 | RNVC: 2
2.50CBB2HKTVS14A4.125: RNCC: 5 | RNVC: 1

8 Feb 1996

3040-01-425-1531
Spline Adapter

014251531
12388290: RNCC: 3 | RNVC: 2
12388290: RNCC: 5 | RNVC: 2
3040014251531: RNCC: 6 | RNVC: 9

13 Feb 1996

3040-01-428-5710
Mechanical Drive Housing

014285710
029202-1: RNCC: 3 | RNVC: 2
029202-1: RNCC: 5 | RNVC: 9

28 Mar 1996

3040-01-428-5746
Shouldered Shaft

014285746
029568-1: RNCC: 3 | RNVC: 9
029568-1: RNCC: 5 | RNVC: 2

28 Mar 1996

3040-01-429-8385
Shaft Retaining Plate

014298385
218012896: RNCC: 3 | RNVC: 2
556-6406593-MTPD-A28: RNCC: 5 | RNVC: 2
6406593-MTPD-A28: RNCC: 5 | RNVC: 2
C791-8301 FN MTPD-A28: RNCC: 5 | RNVC: 9
6406593: RNCC: D | RNVC: 9

19 Apr 1996

3040-01-430-2612
Manual Control Lever

014302612
3919282: RNCC: 3 | RNVC: 2
9414101217: RNCC: 5 | RNVC: 2
032683T: RNCC: 5 | RNVC: 2
3919282: RNCC: 5 | RNVC: 9
3919282: RNCC: 5 | RNVC: 9

25 Apr 1996

3040-01-435-3455
Mechanical Drive Housing

014353455
R30CA108-3X: RNCC: 3 | RNVC: 2

21 Aug 1996

3040-01-436-4951
Straight Shaft

014364951
93300559-1: RNCC: 3 | RNVC: 2
93300559: RNCC: D | RNVC: 9

20 Sep 1996

3040-01-436-7808
Shouldered Shaft

014367808
029560-1: RNCC: 3 | RNVC: 2
029560-1: RNCC: 5 | RNVC: 9
3040PL0893360: RNCC: 6 | RNVC: 9
3040PL1817026: RNCC: 6 | RNVC: 9
029560-1: RNCC: C | RNVC: 1
029560: RNCC: D | RNVC: 9

27 Sep 1996

3040-01-436-9587
Rigid Connecting Link

014369587
029207-1: RNCC: 3 | RNVC: 2
029207-1: RNCC: 5 | RNVC: 9
029207-1: RNCC: C | RNVC: 1
029207: RNCC: D | RNVC: 9

2 Oct 1996

3040-01-436-8790
Shouldered Shaft

014368790
IS-165: RNCC: 3 | RNVC: 2
593-6960581 PC17: RNCC: 5 | RNVC: 2
593-6960624: RNCC: 5 | RNVC: 2
6960581: RNCC: D | RNVC: 9
6960624: RNCC: D | RNVC: 9

30 Sep 1996

3040-01-437-1335
Friction Lining

014371335
M9010: RNCC: 3 | RNVC: 2
SK-F-89008 REV C PC 1: RNCC: 5 | RNVC: 2
RAYMARK M9010: RNCC: 5 | RNVC: 2
SK-F-89008: RNCC: D | RNVC: 9

7 Oct 1996

3040-01-438-5293
Flexible Shaft Assembly Core

014385293
57353-00: RNCC: 3 | RNVC: 2
40052279: RNCC: 5 | RNVC: 2
57353-00-174FT: RNCC: 5 | RNVC: 9
57353-174: RNCC: 5 | RNVC: 9

12 Nov 1996

3040-01-438-6873
Rigid Connecting Link

014386873
348518-5: RNCC: 3 | RNVC: 2
348518-5: RNCC: 5 | RNVC: 2

15 Nov 1996

3040-01-440-5742
Rigid Connecting Link

014405742
4643-033: RNCC: 3 | RNVC: 2

17 Jan 1997

3040-01-441-2890
Shouldered Shaft

014412890
3886013-001: RNCC: 3 | RNVC: 2
3886013-001: RNCC: 3 | RNVC: 9
3886013-001: RNCC: 5 | RNVC: 9
3886013: RNCC: D | RNVC: 9

7 Feb 1997

3040-01-441-2454
Manual Control Lever

014412454
6617723S: RNCC: 3 | RNVC: 2
EJS3M13760: RNCC: 5 | RNVC: 2
6617723: RNCC: 5 | RNVC: 9
6617723: RNCC: 5 | RNVC: 9
6615464: RNCC: D | RNVC: 9

6 Feb 1997

3040-01-442-1149
Unload Support Gate

014421149
3305AS617-1: RNCC: 3 | RNVC: 2
3305AS617-1: RNCC: 5 | RNVC: 2
3040PL0669822: RNCC: 6 | RNVC: 9
3305AS617: RNCC: D | RNVC: 9

5 Mar 1997

3040-01-442-4786
Rigid Connecting Link

014424786
4080331: RNCC: 3 | RNVC: 2
4080331: RNCC: 5 | RNVC: 2
4080331: RNCC: 5 | RNVC: 2
4078122-01: RNCC: 5 | RNVC: 9
4082554-01: RNCC: 5 | RNVC: 9
4078122-01: RNCC: 5 | RNVC: 9

14 Mar 1997

3040-01-443-3680
Shouldered Shaft

014433680
757-3936-002: RNCC: 3 | RNVC: 2
757-3936-002: RNCC: 5 | RNVC: 2
757-3936: RNCC: D | RNVC: 9

9 Apr 1997

3040-01-444-1992
Rigid Connecting Link

014441992
901-011-362-101: RNCC: 3 | RNVC: 2

1 May 1997

3040-01-443-8745
Straight Shaft

014438745
123-4403541 PART 28: RNCC: 3 | RNVC: 2
1502-216 PART 28: RNCC: 5 | RNVC: 9
123-5941945 PART 28: RNCC: 5 | RNVC: 9
1502-215 PART 28: RNCC: 5 | RNVC: 9
123-4403541 PAR: RNCC: C | RNVC: 1
123-4403541 PAR: RNCC: C | RNVC: 1
5941945: RNCC: D | RNVC: 9

21 Apr 1997

3040-01-444-5134
Rigid Connecting Link

014445134
120-34240-1: RNCC: 3 | RNVC: 2
120-34240-1: RNCC: 5 | RNVC: 9

8 May 1997

3040-01-445-3230
Control Cam

014453230
12357439: RNCC: 3 | RNVC: 2

29 May 1997

3040-01-442-0400
Straight Shaft

014420400
15-3800-09: RNCC: 3 | RNVC: 2
15-3800-09: RNCC: 5 | RNVC: 2

3 Mar 1997

3040-01-445-5706
Lift P Rod Assembly

014455706
5267162: RNCC: 3 | RNVC: 2

5 Jun 1997

3040-01-447-7968
Rigid Connecting Link

014477968
75A613616-2003: RNCC: 3 | RNVC: 2
75A613616: RNCC: D | RNVC: 9

14 Aug 1997

3040-01-445-9110
Helical Gearshaft

014459110
12469188: RNCC: 3 | RNVC: 2
12469188: RNCC: 3 | RNVC: 2
2538941: RNCC: 3 | RNVC: 2
RCSK17252: RNCC: 5 | RNVC: 9
RCSK17252: RNCC: 5 | RNVC: 9

17 Jun 1997

3040-01-449-8979
Counterbalance Weight

014498979
397185-1: RNCC: 3 | RNVC: 2
397185-1: RNCC: 5 | RNVC: 9
397185: RNCC: D | RNVC: 9

20 Oct 1997

3040-01-449-8991
Counterbalance Weight

014498991
397529-1: RNCC: 3 | RNVC: 2
397529-1: RNCC: 5 | RNVC: 9
397529: RNCC: D | RNVC: 9

20 Oct 1997

3040-01-450-0189
Worm Shaft

014500189
83643-7: RNCC: 3 | RNVC: 2
P3643-7: RNCC: 5 | RNVC: 9
84032 ITEM 24: RNCC: 5 | RNVC: 9
84032: RNCC: D | RNVC: 9

23 Oct 1997

3040-01-452-7472
Rigid Connecting Link

014527472
167-6926191 PIECE39 ZINC COATED: RNCC: 3 | RNVC: 2

5 Feb 1998

3040-01-453-3011
Bell Crank

014533011
3036AS575: RNCC: 3 | RNVC: 2
3036AS575: RNCC: 5 | RNVC: 2
3036AS575: RNCC: 5 | RNVC: 2
3036AS575: RNCC: 5 | RNVC: 2
3036AS575: RNCC: 5 | RNVC: 2

25 Feb 1998

3040-01-453-2853
Bell Crank

014532853
3036AS410: RNCC: 3 | RNVC: 2
3036AS410: RNCC: 5 | RNVC: 2
3036AS410: RNCC: 5 | RNVC: 2
3036AS410: RNCC: 5 | RNVC: 2
3036AS410: RNCC: 5 | RNVC: 2
C005544-501: RNCC: C | RNVC: 1

25 Feb 1998

3040-01-454-2309
Push-Pull Control Assembly

014542309
C1615Z-30 FT: RNCC: 3 | RNVC: 2
C1615Z: RNCC: D | RNVC: 9

24 Mar 1998

3040-01-454-5342
Shouldered Shaft

014545342
6054: RNCC: 3 | RNVC: 2

3 Apr 1998

3040-01-454-9634
Straight Shaft

014549634
7578994-001: RNCC: 3 | RNVC: 2
7578994-001: RNCC: 3 | RNVC: 9
7578994-001: RNCC: 5 | RNVC: 2

17 Apr 1998

3040-01-455-2271
Extension Shaft

014552271
11477073: RNCC: 3 | RNVC: 2
11477073: RNCC: 3 | RNVC: 2
11477073: RNCC: 5 | RNVC: 2
11477073: RNCC: 5 | RNVC: 9

27 Apr 1998

3040-01-456-6721
Push-Pull Control Assembly

014566721
316832-3-288: RNCC: 3 | RNVC: 2
301947-003-24FT: RNCC: 3 | RNVC: 9
301947-003-288: RNCC: 5 | RNVC: 2
301947-003-24FT: RNCC: 5 | RNVC: 9
301947-003-288: RNCC: 5 | RNVC: 9

22 Jun 1998

3040-01-456-8738
Linear Actuating Cylinder Assembly Parts Kit

014568738
RG2HLTS201: RNCC: 3 | RNVC: 2
RG2HTLS201: RNCC: 3 | RNVC: 9
RGHLTS201: RNCC: 5 | RNVC: 9

29 Jun 1998

3040-01-431-2419
Manual Control Lever

014312419
3009400: RNCC: 3 | RNVC: 2
B229 REP NO.42: RNCC: 5 | RNVC: 9
G2563: RNCC: 5 | RNVC: 9
B229: RNCC: D | RNVC: 9

9 May 1996

3040-01-431-2533
Shouldered Shaft

014312533
7575099-001: RNCC: 3 | RNVC: 2
7575099: RNCC: D | RNVC: 9

9 May 1996

3040-01-432-2497
Bevel Gearshaft

014322497
6427-GM-3: RNCC: 3 | RNVC: 2
6427-GM1: RNCC: 5 | RNVC: 9

30 May 1996

3040-01-432-5732
Mechanical Drive Housing

014325732
05350100106: RNCC: 3 | RNVC: 2
050350103106: RNCC: 5 | RNVC: 2

10 Jun 1996

3040-01-432-7333
Linear Actuating Cylinder Piston

014327333
66750-080029: RNCC: 3 | RNVC: 2

13 Jun 1996

3040-01-433-1789
Mechanical Drive Housing

014331789
246032: RNCC: 3 | RNVC: 9

24 Jun 1996

3040-01-421-9631
Mechanical Drive Housing

014219631
903-5912047PC3: RNCC: 3 | RNVC: 2
903-5912047: RNCC: D | RNVC: 9

17 Nov 1995

3040-01-422-3710
Rotary Actuating Cylinder Assembly

014223710
R909418333: RNCC: 3 | RNVC: 2
418333: RNCC: 5 | RNVC: 9
418333-201: RNCC: 5 | RNVC: 9
HU09418333: RNCC: 5 | RNVC: 9

30 Nov 1995

3040-01-423-6049
Shouldered Shaft

014236049
11-466: RNCC: 3 | RNVC: 2

4 Jan 1996

3040-01-434-0438
Shouldered Shaft

014340438
654911: RNCC: 3 | RNVC: 2
654911: RNCC: 5 | RNVC: 9

18 Jul 1996

3040-01-424-9861
Control Cam

014249861
211048496: RNCC: 3 | RNVC: 2
6406827 AY99 FIND NO.5: RNCC: 5 | RNVC: 2
6406827: RNCC: D | RNVC: 9

8 Feb 1996

3040-01-425-5654
Nonrotating Shaft Eye Bracket

014255654
A3254021: RNCC: 3 | RNVC: 2

23 Feb 1996

3040-01-425-8766
Cylinder Positioner Diaphragm

014258766
P12601522: RNCC: 3 | RNVC: 2
P12601522: RNCC: 3 | RNVC: 9

29 Feb 1996

3040-01-446-3782
Shouldered Shaft

014463782
AIN/0311 860732: RNCC: 3 | RNVC: 2
0311-860732: RNCC: 5 | RNVC: 2

1 Jul 1997

3040-01-444-8770
Shaft-Hub Clamp-Bushing Assembly

014448770
65720-35625-120: RNCC: 3 | RNVC: 2

19 May 1997

3040-01-424-1471
Linear Actuating Cylinder Assembly

014241471
D-1455: RNCC: 3 | RNVC: 2
904834: RNCC: 5 | RNVC: 2

22 Jan 1996

3040-01-370-5484
Linear Actuating Cylinder Assembly

013705484
6-372-004348: RNCC: 3 | RNVC: 2
6-372-004348: RNCC: 5 | RNVC: 2
6-372-004348: RNCC: 5 | RNVC: 2

24 Jan 1993

3040-01-370-4796
Control Cam

013704796
211055095: RNCC: 3 | RNVC: 2
6408779-29: RNCC: 5 | RNVC: 2
6408779: RNCC: D | RNVC: 9

23 Jan 1993

3040-01-371-2652
Shouldered Shaft

013712652
10951081: RNCC: 3 | RNVC: 2

9 Feb 1993

3040-01-372-5536
Linear Actuating Cylinder Assembly

013725536
9-242-010184: RNCC: 3 | RNVC: 2
9-242-010184: RNCC: 5 | RNVC: 2
9-242-010184: RNCC: 5 | RNVC: 2

12 Mar 1993

3040-01-373-0528
Straight Shaft

013730528
519922-1: RNCC: 3 | RNVC: 2

26 Mar 1993

3040-01-374-3024
Brake Disc

013743024
97022: RNCC: 3 | RNVC: 2
97022: RNCC: 5 | RNVC: 9
P-202 ITEM 906: RNCC: 5 | RNVC: 9
97002: RNCC: 5 | RNVC: 9

20 Apr 1993

3040-01-376-4546
Mechanical Drive Housing

013764546
12726: RNCC: 3 | RNVC: 2
12726: RNCC: 5 | RNVC: 2
7HA370: RNCC: 5 | RNVC: 2
12726: RNCC: 5 | RNVC: 2
7HA370: RNCC: 5 | RNVC: 9

3 Jun 1993

3040-01-375-7397
Rigid Connecting Link

013757397
12417722-001: RNCC: 3 | RNVC: 2
12417722-001: RNCC: 3 | RNVC: 2
12417722-001: RNCC: 5 | RNVC: 2
12417722: RNCC: 5 | RNVC: 9
12417722: RNCC: D | RNVC: 9

20 May 1993

3040-01-377-4262
Rigid Connecting Link

013774262
12367715: RNCC: 3 | RNVC: 2

15 Jul 1993

3040-01-377-7403
Rigid Connecting Link

013777403
75A326692-1003: RNCC: 3 | RNVC: 9
75A326692-1003: RNCC: 5 | RNVC: 2
75A326692-1003: RNCC: 5 | RNVC: 9
75A326692-1003: RNCC: 5 | RNVC: 9
75A326692-1003: RNCC: 5 | RNVC: 9
75A326692-1003: RNCC: 5 | RNVC: 9
75A326692-1003: RNCC: 5 | RNVC: 9

24 Jul 1993

3040-01-377-3129
Mechanical Drive Housing

013773129
02-773291: RNCC: 3 | RNVC: 2
877221: RNCC: 5 | RNVC: 9
2HS659: RNCC: C | RNVC: 1

12 Jul 1993

3040-01-378-5015
Shouldered Shaft

013785015
801-6406709 FIND 17: RNCC: 3 | RNVC: 2
211041080: RNCC: 3 | RNVC: 2
6406709: RNCC: D | RNVC: 9

21 Aug 1993

3040-01-378-6099
Linear Actuating Cylinder Assembly

013786099
A-068-25-07-A: RNCC: 3 | RNVC: 2
A0682507A: RNCC: 5 | RNVC: 2

21 Aug 1993

3040-01-381-8254
Piston Ring

013818254
238-5242: RNCC: 3 | RNVC: 2

22 Oct 1993

3040-01-382-6660
Nonrotating Shaft Eye Bracket

013826660
523122-1: RNCC: 3 | RNVC: 2
523122-1: RNCC: 5 | RNVC: 2
523122: RNCC: D | RNVC: 9

5 Nov 1993

3040-01-383-5016
Pneumatic Accumulator

013835016
2V02250011: RNCC: 3 | RNVC: 2
351-002-000-0: RNCC: 5 | RNVC: 9
2V02250006 ITEM 73: RNCC: 5 | RNVC: 9

25 Nov 1993

3040-01-383-2021
Filler Opening Cap

013832021
12412379: RNCC: 3 | RNVC: 2
12412379: RNCC: 5 | RNVC: 2
12412379: RNCC: 5 | RNVC: 2
12412379: RNCC: 7 | RNVC: 2

19 Nov 1993

3040-01-383-5742
Rigid Connecting Link

013835742
2046-0009: RNCC: 3 | RNVC: 2

25 Nov 1993

3040-01-384-1174
Bell Crank

013841174
12385228: RNCC: 3 | RNVC: 2

8 Dec 1993

3040-01-384-8973
Rigid Connecting Link

013848973
357543-1: RNCC: 3 | RNVC: 2
357543: RNCC: D | RNVC: 9

23 Dec 1993

3040-01-386-4109
Guide Cylinder

013864109
G-508 ITEM P: RNCC: 3 | RNVC: 2
PP-1216: RNCC: 5 | RNVC: 2
PP-1215: RNCC: 5 | RNVC: 2
G-508: RNCC: D | RNVC: 9

4 Feb 1994

3040-01-383-5833
Brake Shoe Set

013835833
471096PN10,PN11: RNCC: 3 | RNVC: 2
8.00-0100-10 AND 11: RNCC: 3 | RNVC: 2
8.00-0100-10X11: RNCC: 3 | RNVC: 2
471096PN10: RNCC: 5 | RNVC: 9
8.00-0100-10: RNCC: 5 | RNVC: 9
8.00-0100-10,11: RNCC: C | RNVC: 1
471096: RNCC: D | RNVC: 9

25 Nov 1993

3040-01-386-8326
Spur Gearshaft

013868326
24577: RNCC: 3 | RNVC: 2

16 Feb 1994

3040-01-387-7135
Shaft Collar

013877135
T442459: RNCC: 3 | RNVC: 2
T442459: RNCC: 5 | RNVC: 9

10 Mar 1994

3040-01-387-7247
Flexible Shaft Assembly Core

013877247
57353-45: RNCC: 3 | RNVC: 2

10 Mar 1994

3040-01-388-5810
Nonrotating Shaft Eye Bracket

013885810
12384973: RNCC: 3 | RNVC: 2

4 Apr 1994

3040-01-389-7593
Control Cam

013897593
557-017-055: RNCC: 3 | RNVC: 9

3 May 1994

3040-01-389-0539
Straight Shaft

013890539
701-6016276 PIECE 50: RNCC: 3 | RNVC: 2
QQ-S-763 CL316 .75DIA X 23IN: RNCC: 5 | RNVC: 2
6016276: RNCC: D | RNVC: 9

14 Apr 1994

3040-01-389-7783
Counterbalance Weight

013897783
132V996-2: RNCC: 3 | RNVC: 9
511L33FA ITEM 35: RNCC: 5 | RNVC: 9
132V996-2: RNCC: C | RNVC: 1
511L33FA ITEM 35: RNCC: C | RNVC: 1
511L33FA ITEM 35: RNCC: C | RNVC: 1
132V996-2: RNCC: C | RNVC: 1

3 May 1994

3040-01-391-2949
Bevel Gearshaft

013912949
10048068: RNCC: 3 | RNVC: 2
10029059: RNCC: C | RNVC: 1

8 Jun 1994

3040-01-393-0945
Straight Axle

013930945
12417458: RNCC: 3 | RNVC: 2
12417458: RNCC: 5 | RNVC: 2
12417458: RNCC: 5 | RNVC: 2
12417458: RNCC: 5 | RNVC: 2

13 Jul 1994

3040-01-393-2181
Spline Adapter

013932181
10005 ITEM 4: RNCC: 3 | RNVC: 2
40019-1: RNCC: 5 | RNVC: 2
40019 PART 40019-1: RNCC: 5 | RNVC: 2

15 Jul 1994

3040-01-392-7732
Shouldered Shaft

013927732
9240-004 ITEM 17 (SHEET 9): RNCC: 3 | RNVC: 2
9240-004-09: RNCC: 5 | RNVC: 9

6 Jul 1994

3040-01-394-4817
Shouldered Shaft

013944817
M27780001: RNCC: 3 | RNVC: 2
M27780001: RNCC: 3 | RNVC: 9
M27780001: RNCC: 5 | RNVC: 2

9 Aug 1994

3040-01-397-2317
Straight Shaft

013972317
12371048: RNCC: 3 | RNVC: 2
DAX11568: RNCC: 5 | RNVC: 9

6 Oct 1994

3040-01-398-2101
Rigid Connecting Link

013982101
2007G28-2: RNCC: 3 | RNVC: 9
2007G68-1: RNCC: C | RNVC: 1
2007G28-2: RNCC: C | RNVC: 1
2007G68-1: RNCC: C | RNVC: 1

26 Oct 1994

3040-01-398-8447
Mechanical Drive Housing Part

013988447
9500-213-306: RNCC: 3 | RNVC: 2
9500-213: RNCC: 5 | RNVC: 9
V300-008 NO 4: RNCC: 5 | RNVC: 9
V300-008 PIECE 4: RNCC: 5 | RNVC: 9

9 Nov 1994

3040-01-399-5675
Rigid Connecting Link

013995675
5110472: RNCC: 3 | RNVC: 2
5110472: RNCC: 5 | RNVC: 2

30 Nov 1994

3040-01-407-4669
Mechanically Actuated Spindle

014074669
17098: RNCC: 3 | RNVC: 2
SKB-465 ITEM X76: RNCC: 5 | RNVC: 2

28 Jan 1995

3040-01-407-7975
Piston Ring

014077975
87205: RNCC: 3 | RNVC: 2
ASA-17435-1: RNCC: 3 | RNVC: 2
65651-11388-113: RNCC: 5 | RNVC: 2

6 Feb 1995

3040-01-408-1641
Rigid Connecting Link

014081641
2623114: RNCC: 3 | RNVC: 2

10 Feb 1995

3040-01-410-8107
Bell Crank

014108107
12364669: RNCC: 3 | RNVC: 2
12364669: RNCC: 5 | RNVC: 2
12364669: RNCC: 5 | RNVC: 2

12 Mar 1995

3040-01-411-2140
Housing Adapter

014112140
12448154: RNCC: 3 | RNVC: 2
12448154: RNCC: 5 | RNVC: 2
12448154: RNCC: 5 | RNVC: 2

20 Mar 1995

3040-01-412-5231
Rigid Connecting Link

014125231
4236-0062: RNCC: 3 | RNVC: 2
4236-0062: RNCC: 3 | RNVC: 9
9999 4002-4: RNCC: 5 | RNVC: 2
9999 4001-4: RNCC: 5 | RNVC: 9

20 Apr 1995

3040-01-414-0397
Shouldered Shaft

014140397
15262007-001: RNCC: 3 | RNVC: 2
15261000 ITEM NO 40: RNCC: 5 | RNVC: 9
15262007-001: RNCC: 5 | RNVC: 9
15262007-001: RNCC: 5 | RNVC: 9

30 May 1995

3040-01-414-7873
Bell Crank

014147873
352940-7: RNCC: 3 | RNVC: 2
352940-7: RNCC: 5 | RNVC: 2
352940-7: RNCC: 5 | RNVC: 9

14 Jun 1995

3040-01-414-0415
Counterbalance Weight

014140415
260763: RNCC: 3 | RNVC: 2
260763: RNCC: 5 | RNVC: 2

30 May 1995

3040-01-415-4332
Straight Shaft

014154332
12366652: RNCC: 3 | RNVC: 2
B713F: RNCC: 5 | RNVC: 9

27 Jun 1995

3040-01-415-4493
Rigid Connecting Link

014154493
2-73030-21: RNCC: 3 | RNVC: 2
2-73030-21: RNCC: 5 | RNVC: 2
2-73030-21: RNCC: 5 | RNVC: 2
2-73030-21: RNCC: 5 | RNVC: 2
2-73030-21: RNCC: 5 | RNVC: 2
2-73030-21: RNCC: 5 | RNVC: 2
2-73030-21: RNCC: 5 | RNVC: 2
2-73030-21: RNCC: 5 | RNVC: 9
2-73030-13: RNCC: 5 | RNVC: 9
2-73030-21: RNCC: 5 | RNVC: 9

26 Sep 2000

3040-01-415-8658
Pivot Shaft Assembly

014158658
12592840: RNCC: 3 | RNVC: 2

7 Jul 1995

3040-01-417-2746
Cylinder Support

014172746
12417885: RNCC: 3 | RNVC: 2
12417885: RNCC: 3 | RNVC: 2
12417885: RNCC: 5 | RNVC: 2

3 Aug 1995

3040-01-417-9404
Shouldered Shaft

014179404
21129-1003-1: RNCC: 3 | RNVC: 2
21129-68: RNCC: 5 | RNVC: 9
21129: RNCC: D | RNVC: 9

17 Aug 1995

3040-01-418-4035
Ball Joint

014184035
26-0501-34: RNCC: 3 | RNVC: 2

25 Aug 1995

3040-01-418-3137
Rigid Connecting Link

014183137
901-301-014-107: RNCC: 3 | RNVC: 2
C-01037-107: RNCC: 5 | RNVC: 9

24 Aug 1995

3040-01-419-1615
Piston Ring Set

014191615
S32152-211PH: RNCC: 3 | RNVC: 2
21332 FIND 60: RNCC: 5 | RNVC: 9
21340 FIND 32: RNCC: C | RNVC: 1

14 Sep 1995

3040-01-419-5370
Stave Dampening Module

014195370
211043319: RNCC: 3 | RNVC: 2
211043319: RNCC: 5 | RNVC: 9

25 Sep 1995

3040-01-420-5315
Linear Actuating Cylinder Assembly

014205315
8102212: RNCC: 3 | RNVC: 2
2787006: RNCC: 5 | RNVC: 9

19 Oct 1995

3040-01-433-6207
Rigid Connecting Link

014336207
4660911-013: RNCC: 3 | RNVC: 2
4660911-013: RNCC: 3 | RNVC: 9
4660911-013: RNCC: 5 | RNVC: 2

5 Jul 1996

3040-01-434-1819
Piston Rod Guide

014341819
194330-0157: RNCC: 3 | RNVC: 2
236179-0001 ITEM 19: RNCC: 5 | RNVC: 9
236179-0002 ITEM 17: RNCC: 5 | RNVC: 9
236179-0001: RNCC: D | RNVC: 9
236179-0002: RNCC: D | RNVC: 9

23 Jul 1996

3040-01-434-0752
Shouldered Shaft

014340752
715555: RNCC: 3 | RNVC: 2

19 Jul 1996

3040-01-434-3364
Nonrotating Shaft Eye Bracket

014343364
E8CR100-003: RNCC: 3 | RNVC: 2
E8CR100-003: RNCC: 5 | RNVC: 9

26 Jul 1996

3040-01-424-9872
Worm Shaft

014249872
6352185: RNCC: 1 | RNVC: 2
80-210-20: RNCC: 3 | RNVC: 2

8 Feb 1996

3040-01-423-6139
Linear Actuating Cylinder Assembly Parts Kit

014236139
104913: RNCC: 3 | RNVC: 9
106243: RNCC: 5 | RNVC: 2
104913: RNCC: 5 | RNVC: 9

4 Jan 1996

3040-01-425-4850
Mechanical Drive Housing

014254850
423D3710-1: RNCC: 3 | RNVC: 2

22 Feb 1996

3040-01-423-7656
Rigid Connecting Link

014237656
593-6961250 PC 38: RNCC: 3 | RNVC: 2
6961250: RNCC: D | RNVC: 9

9 Jan 1996

3040-01-424-0785
Rigid Connecting Link

014240785
3168617-1: RNCC: 3 | RNVC: 2
3168617-1: RNCC: 5 | RNVC: 9
3168617-1: RNCC: 5 | RNVC: 9
3168617-1: RNCC: 5 | RNVC: 9
10107298: RNCC: 6 | RNVC: 9

19 Jan 1996

3040-01-428-1825
Pawl

014281825
1211176-210: RNCC: 3 | RNVC: 2

21 Mar 1996

3040-01-436-6602
Shouldered Shaft

014366602
3305AS621-1: RNCC: 3 | RNVC: 2
3305AS621-1: RNCC: 5 | RNVC: 2
3305AS621-1: RNCC: 5 | RNVC: 9
3305AS621-1: RNCC: C | RNVC: 1
3305AS621: RNCC: D | RNVC: 9

25 Sep 1996

3040-01-437-1034
Straight Shaft

014371034
643760101: RNCC: 3 | RNVC: 2
643760101: RNCC: 3 | RNVC: 9

4 Oct 1996

3040-01-438-7795
Pawl

014387795
7115372: RNCC: 3 | RNVC: 2
7115372: RNCC: 5 | RNVC: 9

19 Nov 1996

3040-01-439-2320
Control Cam

014392320
6617371: RNCC: 3 | RNVC: 2
6617371: RNCC: 5 | RNVC: 9

3 Dec 1996

3040-01-439-5574
Linear Actuating Cylinder Assembly

014395574
7L-G-1.50-11.50-NC-0.625-1: RNCC: 3 | RNVC: 2
23059167: RNCC: 5 | RNVC: 2
23059068 ITEM 5: RNCC: 5 | RNVC: 9

12 Dec 1996

3040-01-439-7488
Body Hub

014397488
29514799: RNCC: 3 | RNVC: 2
29514799: RNCC: 5 | RNVC: 2
29514799: RNCC: 5 | RNVC: 2

18 Dec 1996

3040-01-440-4594
Shouldered Shaft

014404594
39072: RNCC: 3 | RNVC: 2

14 Jan 1997

3040-01-440-4487
Mechanical Drive Housing

014404487
3917760: RNCC: 3 | RNVC: 2

14 Jan 1997

3040-01-439-3507
Shouldered Shaft

014393507
2004680: RNCC: 3 | RNVC: 2
OSH/2004680: RNCC: 5 | RNVC: 2
2004680: RNCC: 5 | RNVC: 9

5 Dec 1996

3040-01-440-6258
Shaft Collar

014406258
70700-77533-102: RNCC: 3 | RNVC: 2

21 Jan 1997

3040-01-440-6230
Shouldered Shaft

014406230
70700-77533-101: RNCC: 3 | RNVC: 2

21 Jan 1997

3040-01-442-6410
Shouldered Shaft

014426410
5009563: RNCC: 3 | RNVC: 2
5009563: RNCC: 5 | RNVC: 2
5009563: RNCC: 5 | RNVC: 2
10107300: RNCC: 6 | RNVC: 9
5009563: RNCC: D | RNVC: 9

20 Mar 1997

3040-01-443-4284
Shouldered Shaft

014434284
5116T02P01: RNCC: 3 | RNVC: 2

10 Apr 1997

3040-01-444-3142
Shouldered Shaft

014443142
901-032-697-101: RNCC: 3 | RNVC: 2

5 May 1997

3040-01-445-1651
Rigid Connecting Link

014451651
12255972-2: RNCC: 3 | RNVC: 2
12255972-2: RNCC: 5 | RNVC: 2
12255972: RNCC: D | RNVC: 9

27 May 1997

3040-01-446-6397
Shouldered Shaft

014466397
123-4403552 PC 4: RNCC: 3 | RNVC: 2
123-4403552 PC 4SS: RNCC: 5 | RNVC: 2
1502-96 FN 4: RNCC: 5 | RNVC: 9
4403552 PC 4: RNCC: C | RNVC: 1
4403552: RNCC: D | RNVC: 9

11 Jul 1997

3040-01-447-3797
Spur Gearshaft

014473797
8661708: RNCC: 3 | RNVC: 2
8661708: RNCC: 5 | RNVC: 9
8661708: RNCC: 5 | RNVC: 9
3040PL0739352: RNCC: 6 | RNVC: 9
5743363: RNCC: D | RNVC: 9

4 Aug 1997

3040-01-449-0253
Shouldered Shaft

014490253
2109-036: RNCC: 3 | RNVC: 2
2109-036: RNCC: 3 | RNVC: 2
2109-1: RNCC: 5 | RNVC: 9
2109-1: RNCC: 5 | RNVC: 9

17 Sep 1997

3040-01-449-8469
Shouldered Shaft

014498469
8100-1251-0192 PC 82: RNCC: 3 | RNVC: 2
8100-1251-0192: RNCC: D | RNVC: 9

17 Oct 1997

3040-01-449-9462
Straight Shaft

014499462
512-6404653-62: RNCC: 3 | RNVC: 2
512-6404652-50: RNCC: 5 | RNVC: 2
DF6503-175 FIND 62: RNCC: 5 | RNVC: 9
6404653: RNCC: D | RNVC: 9

21 Oct 1997

3040-01-450-3941
Linkage Adjuster

014503941
7579611-001: RNCC: 3 | RNVC: 2
7579611-001: RNCC: 5 | RNVC: 2

6 Nov 1997

3040-01-450-4835
Control Cam

014504835
752-6405280 AY 93: RNCC: 3 | RNVC: 2
DF1706-338 AY 93: RNCC: 5 | RNVC: 9
6405280: RNCC: D | RNVC: 9

12 Nov 1997

3040-01-452-5196
Control Cam

014525196
9-163-010008: RNCC: 3 | RNVC: 2
9-163-010008: RNCC: 5 | RNVC: 2
9-163-010008: RNCC: 5 | RNVC: 2

29 Jan 1998

3040-01-452-7411
Rigid Connecting Link

014527411
167-6926191 PC33 ZINC COATED: RNCC: 3 | RNVC: 2

5 Feb 1998

3040-01-452-8342
Shouldered Shaft Assembly

014528342
2684970: RNCC: 3 | RNVC: 2
2663009: RNCC: 5 | RNVC: 9
2650898: RNCC: 5 | RNVC: 9

10 Feb 1998

3040-01-453-3048
Swaybrace Housing

014533048
3036AS710: RNCC: 3 | RNVC: 2
3036AS710: RNCC: 5 | RNVC: 2
3036AS710: RNCC: 5 | RNVC: 2
3036AS710: RNCC: 5 | RNVC: 2
3036AS710: RNCC: 5 | RNVC: 2
3036AS710: RNCC: 5 | RNVC: 2
10107019: RNCC: 6 | RNVC: 9
J014012-1: RNCC: E | RNVC: 8
J014012-1: RNCC: E | RNVC: 8

25 Feb 1998

3040-01-453-6919
Straight Shaft

014536919
12305-151-000: RNCC: 3 | RNVC: 2
12270 FIND NO. 51: RNCC: 5 | RNVC: 2
12270: RNCC: D | RNVC: 9

7 Mar 1998

3040-01-453-5765
Spur Gearshaft

014535765
A1094B: RNCC: 3 | RNVC: 2
4L87D: RNCC: 5 | RNVC: 2
4L87D: RNCC: 5 | RNVC: 9
A1094B: RNCC: 5 | RNVC: 9

4 Mar 1998

3040-01-454-3533
Linear Actuating Cylinder Assembly

014543533
A23280Q9819: RNCC: 3 | RNVC: 2
A2-3280K9449: RNCC: 5 | RNVC: 9

27 Mar 1998

3040-01-454-3739
Pawl

014543739
746646-A00: RNCC: 3 | RNVC: 2
746605-K01PC9: RNCC: 5 | RNVC: 2
746605-K01PC09: RNCC: D | RNVC: 9

27 Mar 1998

3040-01-454-5029
Rigid Connecting Link

014545029
74A656021-1001: RNCC: 3 | RNVC: 2
74A656021-1001: RNCC: 5 | RNVC: 9

2 Apr 1998

3040-01-455-4168
Hydraulic Accumulator

014554168
BA01B3T01P2: RNCC: 3 | RNVC: 2
BA01B3T01A: RNCC: 5 | RNVC: 9
BA01B3T01A1: RNCC: 5 | RNVC: 9
BA01B3T01A: RNCC: 5 | RNVC: 9
BA01B3T01A1: RNCC: 5 | RNVC: 9
AB04B3T1A1: RNCC: 5 | RNVC: 9

1 May 1998

3040-01-456-4515
Rigid Connecting Link

014564515
12524576: RNCC: 3 | RNVC: 2

12 Jun 1998

3040-01-456-4730
Hydraulic Accumulator Piston Rod

014564730
801-6405536 FIND 1: RNCC: 3 | RNVC: 2
211039355: RNCC: C | RNVC: 1

15 Jun 1998

3040-01-370-2883
Linear Actuating Cylinder Piston

013702883
6-701-000911: RNCC: 3 | RNVC: 2
6-701-000911: RNCC: 5 | RNVC: 2
6-701-000911: RNCC: 5 | RNVC: 2

17 Jan 1993

3040-01-370-5486
Linear Actuating Cylinder Assembly

013705486
UTTN91008.19: RNCC: 3 | RNVC: 9
12414617: RNCC: 5 | RNVC: 2
12414617: RNCC: 5 | RNVC: 2
3040013705486: RNCC: 5 | RNVC: 9
12414617: RNCC: 7 | RNVC: 1

24 Jan 1993

3040-01-371-7852
Rigid Connecting Link

013717852
8909-276-001: RNCC: 3 | RNVC: 2
8909-276-001: RNCC: 5 | RNVC: 9

23 Feb 1993

3040-01-372-8257
Nonrotating Shaft Eye Bracket

013728257
2HL482: RNCC: 3 | RNVC: 2
2HL482: RNCC: 5 | RNVC: 9
BLR 1000: RNCC: 5 | RNVC: 9

19 Mar 1993

3040-01-374-5548
Shouldered Shaft

013745548
12376: RNCC: 3 | RNVC: 2
12376: RNCC: 5 | RNVC: 2
2HD239: RNCC: 5 | RNVC: 2
12376: RNCC: 5 | RNVC: 2
2HD239: RNCC: 5 | RNVC: 9

24 Apr 1993

3040-01-375-7287
Straight Shaft

013757287
5598631-3: RNCC: 3 | RNVC: 2
5598631-2: RNCC: 5 | RNVC: 2
5598631-3: RNCC: 5 | RNVC: 2
5598631-1: RNCC: C | RNVC: 1
5598631: RNCC: D | RNVC: 9

20 May 1993

3040-01-375-7632
Retaining Collar

013757632
PWA34861-9-1: RNCC: 3 | RNVC: 2
TCL28-16SS: RNCC: 5 | RNVC: 2
PWA34861-9-1: RNCC: 5 | RNVC: 2
PWA34861-9: RNCC: 5 | RNVC: 9
7632 141 101: RNCC: 5 | RNVC: 9
PWA34861: RNCC: D | RNVC: 9

20 May 1993

3040-01-377-7428
Shaft Retaining Plate

013777428
211053697: RNCC: 3 | RNVC: 2
801-6406768-35: RNCC: 5 | RNVC: 2
6406768: RNCC: D | RNVC: 9

24 Jul 1993

3040-01-379-0580
Push-Pull Control Assembly

013790580
29V00-2-60: RNCC: 3 | RNVC: 2
29V00-2-60: RNCC: 3 | RNVC: 9
83001-402-1: RNCC: 5 | RNVC: 2
NO. 58R: RNCC: 5 | RNVC: 9
29V00: RNCC: 5 | RNVC: 9
83001-402: RNCC: D | RNVC: 9

26 Aug 1993

3040-01-379-2105
Shaft Retaining Plate

013792105
2046-0011: RNCC: 3 | RNVC: 2
D-2046 ITEM 11: RNCC: 5 | RNVC: 2
D-2046: RNCC: D | RNVC: 9

29 Aug 1993

3040-01-379-9168
Linear Actuating Cylinder Assembly

013799168
0172908: RNCC: 3 | RNVC: 2
0172908: RNCC: 3 | RNVC: 9
ZB0172908: RNCC: 5 | RNVC: 2
172908: RNCC: 5 | RNVC: 2
Z0172908: RNCC: 5 | RNVC: 9
172908: RNCC: 5 | RNVC: 9
0172908: RNCC: 5 | RNVC: 9
172908: RNCC: 5 | RNVC: 9
0172908: RNCC: 5 | RNVC: 9
172908: RNCC: 5 | RNVC: 9

10 Sep 1993

3040-01-382-0194
Manual Control Lever

013820194
1385M33G02: RNCC: 3 | RNVC: 2
1385M33: RNCC: D | RNVC: 9

27 Oct 1993

3040-01-382-6456
Counterbalance Weight

013826456
4152244P003: RNCC: 3 | RNVC: 2
4152244P3: RNCC: 3 | RNVC: 2
4152244P3: RNCC: 5 | RNVC: 2
4152244P3: RNCC: 5 | RNVC: 9
4152244: RNCC: D | RNVC: 9

5 Nov 1993

3040-01-378-8833
Spool Assembly

013788833
12389329: RNCC: 3 | RNVC: 2
12389329: RNCC: 5 | RNVC: 2

23 Aug 1993

3040-01-382-6541
Control Cam

013826541
AM2791-6-5: RNCC: 3 | RNVC: 2
10107290: RNCC: 6 | RNVC: 9

5 Nov 1993

3040-01-382-8899
Shouldered Shaft Assembly

013828899
12389494: RNCC: 3 | RNVC: 2
12389494: RNCC: 5 | RNVC: 2

11 Nov 1993

3040-01-385-8955
Straight Shaft

013858955
SW33149: RNCC: 3 | RNVC: 2

21 Jan 1994

3040-01-386-4527
Spur Gearshaft

013864527
43042-00289-2: RNCC: 3 | RNVC: 2
43042-212-00085-9: RNCC: 5 | RNVC: 9
43042-212-00085: RNCC: D | RNVC: 9

4 Feb 1994

3040-01-386-4412
Counterbalance Weight

013864412
9642M26P02: RNCC: 3 | RNVC: 2

4 Feb 1994

3040-01-386-5925
Straight Shaft

013865925
6650439-2: RNCC: 3 | RNVC: 2
717124422504: RNCC: 5 | RNVC: 9

8 Feb 1994

3040-01-386-8383
Shaft Retaining Plate

013868383
W000230132002: RNCC: 3 | RNVC: 2
W000230132002: RNCC: 3 | RNVC: 9
000230132-002: RNCC: 5 | RNVC: 9
164 355 011 ITEM 9: RNCC: 5 | RNVC: 9
000230132-002: RNCC: C | RNVC: 1
000230132: RNCC: D | RNVC: 9
164 355 011: RNCC: D | RNVC: 9

16 Feb 1994

3040-01-387-8437
Shouldered Shaft

013878437
A-18545TY1: RNCC: 3 | RNVC: 2
10-1725 PC53: RNCC: 3 | RNVC: 9

14 Mar 1994

3040-01-388-5676
Shaft Retainer

013885676
743513: RNCC: 3 | RNVC: 2

4 Apr 1994

3040-01-389-0300
Shaft Collar

013890300
12384968: RNCC: 3 | RNVC: 2

14 Apr 1994

3040-01-391-0829
Manual Control Lever

013910829
21243-11: RNCC: 3 | RNVC: 2
21243-11: RNCC: 5 | RNVC: 9
21243-11: RNCC: 5 | RNVC: 9
21243-11: RNCC: C | RNVC: 1
21243: RNCC: D | RNVC: 9

3 Jun 1994

3040-01-392-0389
Shaft Collar

013920389
94404-E: RNCC: 3 | RNVC: 2
3326-9-49: RNCC: 3 | RNVC: 9
94404-E: RNCC: 5 | RNVC: 9

22 Jun 1994

3040-01-393-2693
Shouldered Shaft

013932693
58191: RNCC: 3 | RNVC: 2
58191-00: RNCC: 5 | RNVC: 2
58194 ITEM 4: RNCC: 5 | RNVC: 2
58194: RNCC: D | RNVC: 9

18 Jul 1994

3040-01-393-4528
Shaft Collar

013934528
ASP-LC-MV08: RNCC: 3 | RNVC: 2
5PTV1501-8C: RNCC: 7 | RNVC: 2

20 Jul 1994

3040-01-393-2809
Shaft Retaining Plate

013932809
P12235: RNCC: 3 | RNVC: 2
A4939B: RNCC: 3 | RNVC: 9

18 Jul 1994

3040-01-399-5115
Nonrotating Shaft Eye Bracket

013995115
558920: RNCC: 3 | RNVC: 2
558920: RNCC: 3 | RNVC: 9

28 Nov 1994

3040-01-406-6709
Valve Bellows Thrust Plate

014066709
N-7153: RNCC: 3 | RNVC: 2
M700P-5075-FL-3W-16: RNCC: 5 | RNVC: 9
M700P-5075-FL-3W: RNCC: D | RNVC: 9

9 Jan 1995

3040-01-399-0019
Push-Pull Control Assembly

013990019
B048721-000-0300: RNCC: 3 | RNVC: 9
48721-000-0300: RNCC: 5 | RNVC: 2
B048721-000-0300: RNCC: 5 | RNVC: 2
48721-000-0300: RNCC: 5 | RNVC: 9
B048721-005-030: RNCC: C | RNVC: 1

14 Nov 1994

3040-01-409-0009
Manual Control Lever

014090009
5904-3: RNCC: 3 | RNVC: 2
9-10-55882: RNCC: 5 | RNVC: 9

3 Mar 1995

3040-01-411-4236
Worm Shaft

014114236
903-5912046PC14: RNCC: 3 | RNVC: 2
903-5912046PC14: RNCC: 5 | RNVC: 9
903-5912046: RNCC: D | RNVC: 9

24 Mar 1995

3040-01-411-4025
Straight Shaft

014114025
412-4637517-14: RNCC: 3 | RNVC: 2
2085-14-14: RNCC: 5 | RNVC: 2
4637517-14: RNCC: 5 | RNVC: 2
97-36-692: RNCC: 5 | RNVC: 2
412-4637517-14: RNCC: C | RNVC: 1

24 Mar 1995

3040-01-412-7606
Spline Adapter

014127606
118041-3: RNCC: 3 | RNVC: 2
A15PS257-3: RNCC: 5 | RNVC: 2
118041-3: RNCC: 5 | RNVC: 9
118041: RNCC: D | RNVC: 9
A15PS257: RNCC: D | RNVC: 9

27 Apr 1995

3040-01-412-6825
Friction Lining

014126825
566841500: RNCC: 3 | RNVC: 2
N-1190-A PC NO 13: RNCC: 3 | RNVC: 9
5668411500: RNCC: 5 | RNVC: 9
8-004-105-00: RNCC: 5 | RNVC: 9
N-1190-A: RNCC: D | RNVC: 9

26 Apr 1995

3040-01-413-8883
Linear Actuating Cylinder Assembly

014138883
V-100-2: RNCC: 3 | RNVC: 9
1002470: RNCC: 7 | RNVC: 2

24 May 1995

3040-01-415-6078
Shouldered Shaft

014156078
DAA3272P016-427: RNCC: 1 | RNVC: 2
125328C-08: RNCC: 3 | RNVC: 2

29 Jun 1995

3040-01-415-9135
Mount Bulkhead Swivel

014159135
C81449-2: RNCC: 3 | RNVC: 2
211066889: RNCC: 5 | RNVC: 2
515-6406435-37: RNCC: 5 | RNVC: 2
515-6406435: RNCC: D | RNVC: 9

10 Jul 1995

3040-01-415-9509
Pawl

014159509
5830915: RNCC: 3 | RNVC: 2

10 Jul 1995

3040-01-417-6694
Shaft Collar

014176694
903-5912051PC44: RNCC: 3 | RNVC: 2
5912051: RNCC: D | RNVC: 9

11 Aug 1995

3040-01-417-6691
Piston Rod Ring

014176691
77601: RNCC: 3 | RNVC: 2
118515: RNCC: 5 | RNVC: 9
912426 PIECE 13: RNCC: 5 | RNVC: 9
912426 PIECE 13: RNCC: C | RNVC: 1
118515: RNCC: C | RNVC: 1

11 Aug 1995

3040-01-417-6690
Piston Rod Ring

014176690
135363: RNCC: 3 | RNVC: 2
912426 PIECE 2: RNCC: 5 | RNVC: 2
118298: RNCC: 5 | RNVC: 9
118298: RNCC: 5 | RNVC: 9
912426 PIECE 2: RNCC: 5 | RNVC: 9

11 Aug 1995

3040-01-418-0002
Linear Actuating Cylinder Head

014180002
51480: RNCC: 3 | RNVC: 2
51480: RNCC: 5 | RNVC: 2
51480: RNCC: 5 | RNVC: 2

18 Aug 1995

3040-01-418-3136
Rigid Connecting Link

014183136
901-301-014-105: RNCC: 3 | RNVC: 2

24 Aug 1995

3040-01-418-4076
Body Hub

014184076
V200-006 NO. 4: RNCC: 3 | RNVC: 2
VS40-012 NO. 32: RNCC: 3 | RNVC: 2
9500-115-265G: RNCC: 3 | RNVC: 2
9500-115: RNCC: 5 | RNVC: 9
VS40-012: RNCC: D | RNVC: 9
V200-006: RNCC: D | RNVC: 9

25 Aug 1995

3040-01-418-7792
Brake Backing Plate

014187792
R939002565: RNCC: 3 | RNVC: 2
478 3228-001: RNCC: 5 | RNVC: 2
1781494-802 IT 034: RNCC: 5 | RNVC: 9
4783228-001: RNCC: 5 | RNVC: 9
R939002565: RNCC: 5 | RNVC: 9
4783228-001: RNCC: 5 | RNVC: 9
R939000544: RNCC: 5 | RNVC: 9

6 Sep 1995

3040-01-419-7048
Spur Gearshaft

014197048
367137-4: RNCC: 3 | RNVC: 2

28 Sep 1995

3040-01-420-2180
Push-Pull Control Assembly

014202180
301947-003-20FT: RNCC: 3 | RNVC: 2
301947L20: RNCC: 5 | RNVC: 2
D044194-003-240: RNCC: 5 | RNVC: 2
33C-003-240: RNCC: 5 | RNVC: 9
301947-003-20FT: RNCC: 5 | RNVC: 9
33C-003-240: RNCC: 5 | RNVC: 9
301947-003-240: RNCC: 5 | RNVC: 9
301947-003-0240.0: RNCC: 5 | RNVC: 9
D044194-003-240: RNCC: 5 | RNVC: 9
301947-3-240: RNCC: 5 | RNVC: 9

11 Oct 1995

3040-01-420-8442
Thrust Bearing Shoe

014208442
471007-2: RNCC: 3 | RNVC: 2
11.12-1007-2: RNCC: 5 | RNVC: 2

26 Oct 1995

3040-01-432-4501
Linear Actuating Cylinder Piston

014324501
66750-184050: RNCC: 3 | RNVC: 2

6 Jun 1996

3040-01-433-8131
Ball Joint

014338131
31799-001: RNCC: 3 | RNVC: 2
31799-001: RNCC: 5 | RNVC: 2
31799-001: RNCC: 5 | RNVC: 9
13MPE-201-015 PC 11: RNCC: C | RNVC: 1

11 Jul 1996

3040-01-433-7126
Linear Actuating Cylinder Assembly

014337126
147416: RNCC: 3 | RNVC: 2
147416: RNCC: 5 | RNVC: 2
589-6953092 REV C IT 13: RNCC: 5 | RNVC: 9
147416: RNCC: 5 | RNVC: 9
589-6953091 REV C IT 13: RNCC: 5 | RNVC: 9
589-653091: RNCC: D | RNVC: 9
589-6953092: RNCC: D | RNVC: 9

10 Jul 1996

3040-01-432-7371
Electrical-Fluid Pressure Connector Assembly

014327371
068000100064: RNCC: 3 | RNVC: 2
068000110013: RNCC: 5 | RNVC: 2

13 Jun 1996

3040-01-434-8001
Mechanical Drive Housing

014348001
5-57246-2: RNCC: 3 | RNVC: 2
5-57246-2: RNCC: 5 | RNVC: 2

7 Aug 1996

3040-01-435-9062
Remote Control Lever

014359062
9523M35G04: RNCC: 3 | RNVC: 2
9523M35G04: RNCC: 5 | RNVC: 2

5 Sep 1996

3040-01-424-4016
Clutch Shoe

014244016
MMD-2304: RNCC: 3 | RNVC: 2
AMD-1088 ITEM 110: RNCC: 5 | RNVC: 2

26 Jan 1996

3040-01-424-7593
Linear Actuating Cylinder

014247593
21-10601: RNCC: 3 | RNVC: 2
21-10601: RNCC: 3 | RNVC: 9
589-6953103: RNCC: 5 | RNVC: 2
589-6953103: RNCC: 5 | RNVC: 9

5 Feb 1996

NSN 3040-01-425-0383 014250383 PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY

3040-01-425-0383
Linear Actuating Cylinder Assembly Parts Kit

014250383
23524341: RNCC: 3 | RNVC: 2
8924108: RNCC: 5 | RNVC: 2
23503938: RNCC: 5 | RNVC: 9
23519522: RNCC: 5 | RNVC: 9
08923348: RNCC: C | RNVC: 1
8923804: RNCC: C | RNVC: 1
8924108: RNCC: C | RNVC: 1
23518009: RNCC: C | RNVC: 1

9 Feb 1996

3040-01-425-4861
Spline Adapter

014254861
423DS100-2: RNCC: 1 | RNVC: 2
A11025: RNCC: 3 | RNVC: 2
APP4225138-2: RNCC: 3 | RNVC: 2
A11025: RNCC: 5 | RNVC: 2

22 Feb 1996

3040-01-426-0361
Shouldered Shaft

014260361
7W0195: RNCC: 3 | RNVC: 2

4 Mar 1996

3040-01-425-9552
Push-Pull Control Assembly

014259552
092-03329-130: RNCC: 3 | RNVC: 2
1003546-130: RNCC: 5 | RNVC: 2
92-3329-130: RNCC: 5 | RNVC: 9
92-3329-130: RNCC: C | RNVC: 1

1 Mar 1996

3040-01-428-5727
Straight Shaft

014285727
029288-1: RNCC: 3 | RNVC: 9
029288-1: RNCC: 5 | RNVC: 2

28 Mar 1996

3040-01-429-8418
Shaft Retaining Plate

014298418
6352159: RNCC: 3 | RNVC: 2
6894422 ITEM 79: RNCC: 5 | RNVC: 2
6894422: RNCC: D | RNVC: 9

19 Apr 1996

3040-01-429-9604
Brake Disc

014299604
5210150: RNCC: 3 | RNVC: 2
6894422 ITEM 6: RNCC: 5 | RNVC: 2
6894422: RNCC: D | RNVC: 9

22 Apr 1996

3040-01-436-7423
Bevel Gearshaft

014367423
029539: RNCC: 1 | RNVC: 2
029539-5: RNCC: 3 | RNVC: 2
029539-3: RNCC: 3 | RNVC: 9
029539-5: RNCC: 5 | RNVC: 9
029539: RNCC: 5 | RNVC: 9
029539-5: RNCC: C | RNVC: 1

26 Sep 1996

3040-01-436-5803
Rigid Connecting Link

014365803
4609-545: RNCC: 3 | RNVC: 2
17B9F1112-545: RNCC: 5 | RNVC: 2
17B9F1112: RNCC: 7 | RNVC: 1
4609: RNCC: D | RNVC: 9

23 Sep 1996

3040-01-436-8549
Linear Actuating Cylinder Assembly

014368549
1764AS165-1: RNCC: 3 | RNVC: 2
TH6011540SA-01: RNCC: 3 | RNVC: 2
1764AS165-1: RNCC: 3 | RNVC: 9
1764AS165-1: RNCC: 7 | RNVC: 2

30 Sep 1996

3040-01-436-9056
Shouldered Shaft

014369056
12364517: RNCC: 3 | RNVC: 2
12364517: RNCC: 5 | RNVC: 2
12364517: RNCC: 5 | RNVC: 2

30 Sep 1996

3040-01-437-3614
Rigid Connecting Link

014373614
7001130: RNCC: 3 | RNVC: 2

10 Oct 1996

3040-01-438-2924
Counterbalance Weight

014382924
3823167-1: RNCC: 3 | RNVC: 2
3823167: RNCC: D | RNVC: 9

4 Nov 1996

3040-01-439-0649
Rigid Connecting Link

014390649
1591M23P02: RNCC: 3 | RNVC: 2
1591M24G01: RNCC: 5 | RNVC: 9

26 Nov 1996

3040-01-439-1132
Manual Control Lever

014391132
74B059537-203: RNCC: 3 | RNVC: 2
09020009903: RNCC: 5 | RNVC: 2

27 Nov 1996

3040-01-440-9409
Transmission Sensor

014409409
315733A1: RNCC: 3 | RNVC: 2
S300494: RNCC: 5 | RNVC: 9

29 Jan 1997

3040-01-443-7713
Rigid Connecting Link

014437713
4608-655: RNCC: 3 | RNVC: 2
17B9F1112-655: RNCC: 5 | RNVC: 2

17 Apr 1997

3040-01-444-5640
Rigid Connecting Link

014445640
12460229: RNCC: 3 | RNVC: 2
EC12460229: RNCC: 5 | RNVC: 2
RCSK17788: RNCC: 5 | RNVC: 9
5342PL0725804: RNCC: 6 | RNVC: 9
12460229: RNCC: D | RNVC: 9

10 May 1997

3040-01-444-7878
Remote Control Lever

014447878
12363633-1: RNCC: 3 | RNVC: 2
12363633: RNCC: D | RNVC: 9

16 May 1997

3040-01-444-3350
Straight Shaft

014443350
12447060-2: RNCC: 3 | RNVC: 2
12447060-2: RNCC: 5 | RNVC: 2
3040PL0837150: RNCC: 6 | RNVC: 9
12447060: RNCC: D | RNVC: 9

5 May 1997

3040-01-446-6424
Straight Shaft

014466424
123-4403549 PIECE 8: RNCC: 3 | RNVC: 2
1502-93 FN 8: RNCC: 5 | RNVC: 9
4403549: RNCC: D | RNVC: 9

11 Jul 1997

3040-01-446-9940
Pawl

014469940
1534AS212: RNCC: 3 | RNVC: 2
1534AS212: RNCC: 5 | RNVC: 2
1534AS212: RNCC: 5 | RNVC: 2
1534AS212: RNCC: 5 | RNVC: 2
1534AS212: RNCC: 5 | RNVC: 2
1534AS212: RNCC: 5 | RNVC: 9
D013451-1: RNCC: 5 | RNVC: 9
D013451-1: RNCC: 5 | RNVC: 9
D013451-1: RNCC: 5 | RNVC: 9
D013451-1: RNCC: 5 | RNVC: 9

23 Jul 1997

3040-01-447-8040
Shouldered Shaft

014478040
10245-2: RNCC: 3 | RNVC: 2

14 Aug 1997

3040-01-447-6888
Piston Rod Guide

014476888
21196-1007-1: RNCC: 3 | RNVC: 2
21071-1003-1: RNCC: 3 | RNVC: 2
21071-1003: RNCC: 5 | RNVC: 2
21196 FIND 8: RNCC: 5 | RNVC: 9
21196-1007: RNCC: 5 | RNVC: 9
21196: RNCC: D | RNVC: 9

12 Aug 1997

3040-01-450-5117
Nonaircraft Mechanical Actuator

014505117
2512804: RNCC: 3 | RNVC: 2
5265533: RNCC: 5 | RNVC: 2

13 Nov 1997

3040-01-451-9413
Rotary Hydra Piston

014519413
CB27959-001: RNCC: 3 | RNVC: 2
15098-37135-7: RNCC: 5 | RNVC: 9
36456: RNCC: 5 | RNVC: 9
15098-37135: RNCC: D | RNVC: 9

9 Jan 1998

3040-01-452-7007
Rigid Connecting Link

014527007
803-6397269 PC72 ZINC COATED: RNCC: 3 | RNVC: 2
167-6926191: RNCC: D | RNVC: 9

4 Feb 1998

3040-01-453-2977
Rigid Connecting Link

014532977
3036AS445: RNCC: 3 | RNVC: 2
3036AS445: RNCC: 5 | RNVC: 2
3036AS445: RNCC: 5 | RNVC: 2
3036AS445: RNCC: 5 | RNVC: 2
C014028-1: RNCC: 5 | RNVC: 9
C014028-1: RNCC: 5 | RNVC: 9
C014028: RNCC: 5 | RNVC: 9
3036AS445: RNCC: D | RNVC: 9

25 Feb 1998

3040-01-453-4815
Coupling Flange

014534815
593-6960881 PC 15: RNCC: 3 | RNVC: 2

2 Mar 1998

3040-01-454-3534
Rotating Shaft Eye Bracket

014543534
E9AR130-2620: RNCC: 3 | RNVC: 2

27 Mar 1998

3040-01-454-3756
Manual Control Lever

014543756
746977-A00: RNCC: 3 | RNVC: 2
746625-K01PC13: RNCC: 5 | RNVC: 2

27 Mar 1998

3040-01-454-3783
Body Hub

014543783
845-7016098-X-119: RNCC: 3 | RNVC: 1

27 Mar 1998

3040-01-454-4475
Shouldered Shaft

014544475
7578995-001: RNCC: 3 | RNVC: 2
7578995-001: RNCC: 5 | RNVC: 1
7578995-001: RNCC: 5 | RNVC: 2

31 Mar 1998

3040-01-454-5032
Rigid Connecting Link

014545032
74A656021-1003: RNCC: 3 | RNVC: 2
74A656021-1003: RNCC: 5 | RNVC: 9

2 Apr 1998

3040-01-454-6849
Shouldered Shaft

014546849
7110230-1: RNCC: 3 | RNVC: 2
7110230: RNCC: D | RNVC: 9

9 Apr 1998

3040-01-455-3634
Rigid Connecting Link

014553634
74A400512-1002: RNCC: 3 | RNVC: 2
74A400512-1002: RNCC: 5 | RNVC: 9
74A400512-1002: RNCC: C | RNVC: 1

30 Apr 1998

3040-01-436-0620
Rotating Shaft Eye Bracket

014360620
68A640048-2009: RNCC: 3 | RNVC: 2

10 Sep 1996

3040-01-370-7998
Shouldered Shaft

013707998
20861-1020: RNCC: 3 | RNVC: 2
20861-001 FIND 4: RNCC: 5 | RNVC: 9
20861-001: RNCC: D | RNVC: 9

30 Jan 1993

3040-01-371-4420
Shouldered Shaft

013714420
14-15-171-003: RNCC: 3 | RNVC: 2
14-15-171-003: RNCC: 5 | RNVC: 9

13 Feb 1993

3040-01-371-7362
Se Carrier Assembly

013717362
14-05-659-017: RNCC: 3 | RNVC: 2
14-05-659-017: RNCC: 5 | RNVC: 9
14-15-000-001: RNCC: D | RNVC: 9

22 Feb 1993

3040-01-371-7363
Pr Carrier Assembly

013717363
14-05-659-014: RNCC: 3 | RNVC: 2
14-05-659-014: RNCC: 5 | RNVC: 9
14-15-000-001: RNCC: D | RNVC: 9

22 Feb 1993

3040-01-371-7851
Rigid Connecting Link

013717851
8909-267-001: RNCC: 3 | RNVC: 2
8909-267-001: RNCC: 5 | RNVC: 9

23 Feb 1993

3040-01-372-5502
Straight Shaft

013725502
9-557-010314: RNCC: 3 | RNVC: 2
9-557-010314: RNCC: 5 | RNVC: 2
9-557-010314: RNCC: 5 | RNVC: 2

12 Mar 1993

3040-01-372-7344
Straight Shaft

013727344
9-557-010441: RNCC: 3 | RNVC: 2
9-557-010441: RNCC: 5 | RNVC: 2
9-557-010441: RNCC: 5 | RNVC: 2

17 Mar 1993

3040-01-372-8554
Shouldered Shaft

013728554
B13320002: RNCC: 3 | RNVC: 2
B13320002: RNCC: 3 | RNVC: 9
B13320002: RNCC: 5 | RNVC: 9

20 Mar 1993

3040-01-373-0736
Hydrauli Shear Ring

013730736
911795: RNCC: 3 | RNVC: 2
911795: RNCC: 5 | RNVC: 2
686-50157: RNCC: 5 | RNVC: 9
911795: RNCC: 5 | RNVC: 9
911795: RNCC: 5 | RNVC: 9

26 Mar 1993

3040-01-373-5910
Mechanically Actuated Spindle

013735910
7709158: RNCC: 3 | RNVC: 2

7 Apr 1993

3040-01-375-8191
Ball Joint

013758191
12417461: RNCC: 3 | RNVC: 2
12417461: RNCC: 5 | RNVC: 2

21 May 1993

3040-01-374-7871
Shouldered Shaft

013747871
13252: RNCC: 3 | RNVC: 2
13252: RNCC: 3 | RNVC: 2
13252: RNCC: 5 | RNVC: 2
13252: RNCC: 5 | RNVC: 2
7HA371: RNCC: 5 | RNVC: 2
13252: RNCC: 5 | RNVC: 9

29 Apr 1993

3040-01-377-3960
Rigid Connecting Link

013773960
1534AS315: RNCC: 3 | RNVC: 2
1534AS315: RNCC: 5 | RNVC: 2
1534AS315: RNCC: 5 | RNVC: 2
1534AS315: RNCC: 5 | RNVC: 2
1534AS315: RNCC: 5 | RNVC: 2
1534AS315: RNCC: 5 | RNVC: 2
1534AS315: RNCC: 5 | RNVC: 2
1534AS315: RNCC: 5 | RNVC: 9
D014389-1: RNCC: 5 | RNVC: 9
D014389-1: RNCC: 5 | RNVC: 9

15 Jul 1993

3040-01-377-4289
Straight Shaft

013774289
12419163: RNCC: 3 | RNVC: 2
12419163: RNCC: 3 | RNVC: 2
12419163: RNCC: 5 | RNVC: 2

15 Jul 1993

3040-01-377-8191
Shouldered Shaft

013778191
109181: RNCC: 3 | RNVC: 2

31 Jul 1993

3040-01-378-0749
Flexible Metal Conduit Assembly

013780749
57350-1FT0IN: RNCC: 3 | RNVC: 2
57350-01FT00IN: RNCC: 5 | RNVC: 9
POD-57350-01: RNCC: 5 | RNVC: 9

11 Aug 1993

3040-01-377-1154
Ball Screw Assy Nut

013771154
563-6404329-111: RNCC: 3 | RNVC: 2
211092358: RNCC: 5 | RNVC: 2
3031036: RNCC: 5 | RNVC: 2
211035845: RNCC: 5 | RNVC: 9

3 Jul 1993

3040-01-377-7418
Linear Actuating Cylinder Piston Rod

013777418
1476M51P01: RNCC: 3 | RNVC: 2
1558M35G01: RNCC: 5 | RNVC: 9

24 Jul 1993

3040-01-377-2858
Shouldered Shaft

013772858
5361663 ITEM 49: RNCC: 3 | RNVC: 2
5361663: RNCC: D | RNVC: 9

12 Jul 1993

3040-01-379-1975
Linear Actuating Cylinder Cap

013791975
22445-2: RNCC: 3 | RNVC: 2
6227763: RNCC: D | RNVC: 9

29 Aug 1993

3040-01-379-1997
Linear Actuating Cylinder Piston

013791997
S23479-2: RNCC: 3 | RNVC: 2
23479: RNCC: 5 | RNVC: 9
23479-2: RNCC: 5 | RNVC: 9
22525: RNCC: 5 | RNVC: 9
6227763: RNCC: D | RNVC: 9

29 Aug 1993

3040-01-382-5177
Compressor Stat * Arm

013825177
4081056: RNCC: 3 | RNVC: 2
4081056: RNCC: 5 | RNVC: 2
4081056: RNCC: 5 | RNVC: 9
4066847: RNCC: 5 | RNVC: 9
3040PL0669715: RNCC: 6 | RNVC: 9

4 Nov 1993

3040-01-383-5274
Rigid Connecting Link

013835274
2046-0010: RNCC: 3 | RNVC: 2

25 Nov 1993

3040-01-383-5674
Shouldered Shaft

013835674
200089-001: RNCC: 3 | RNVC: 2
200089-001: RNCC: 3 | RNVC: 9
200089-001: RNCC: 5 | RNVC: 9
200087 PIECE 006: RNCC: 5 | RNVC: 9
200100 PIECE 22.0.6: RNCC: 5 | RNVC: 9
CB-200089-001: RNCC: 5 | RNVC: 9
200000 PIECE 22.0.6: RNCC: 5 | RNVC: 9
20089-001: RNCC: 5 | RNVC: 9

25 Nov 1993

3040-01-384-1023
Rigid Connecting Link

013841023
74A425065-1001: RNCC: 3 | RNVC: 2
74A425065-1001: RNCC: 5 | RNVC: 2
10107292: RNCC: 6 | RNVC: 9
74A425065: RNCC: D | RNVC: 9

8 Dec 1993

3040-01-384-4507
Counterbalance Weight

013844507
389625-1: RNCC: 3 | RNVC: 2

15 Dec 1993

3040-01-385-6973
Breather

013856973
963E959G01: RNCC: 3 | RNVC: 9
963E440 PIECE 64: RNCC: 5 | RNVC: 9
936E959G01: RNCC: 5 | RNVC: 9
936E959G01: RNCC: 5 | RNVC: 9
00936E959G-1: RNCC: 5 | RNVC: 9
963E959G01: RNCC: C | RNVC: 1
963E959G01: RNCC: C | RNVC: 1
963E440: RNCC: D | RNVC: 9

16 Jan 1994

3040-01-386-4179
Nonaircraft Mechanical Actuator

013864179
SW34201: RNCC: 3 | RNVC: 2
9230L1600: RNCC: 5 | RNVC: 2
9230L1600: RNCC: 5 | RNVC: 2
3040013864179: RNCC: 6 | RNVC: 9

4 Feb 1994

3040-01-386-6642
Bell Crank

013866642
2600771: RNCC: 3 | RNVC: 2
2600771: RNCC: 5 | RNVC: 2

10 Feb 1994

3040-01-387-3324
Bell Crank

013873324
6289154: RNCC: 3 | RNVC: 2

2 Mar 1994

3040-01-387-7236
Flexible Shaft Assembly Core

013877236
57353-91: RNCC: 3 | RNVC: 2

10 Mar 1994

3040-01-389-4265
Retaining Collar

013894265
12418543-002: RNCC: 3 | RNVC: 2
12418543-002: RNCC: 5 | RNVC: 2
12418543-002: RNCC: 5 | RNVC: 2
12418543: RNCC: D | RNVC: 9

24 Apr 1994

3040-01-389-9649
Shouldered Shaft

013899649
2040986-1: RNCC: 3 | RNVC: 2
2040986-1: RNCC: 5 | RNVC: 9
2040986: RNCC: D | RNVC: 9

8 May 1994

3040-01-391-5067
Shouldered Shaft

013915067
49332: RNCC: 3 | RNVC: 2

13 Jun 1994

3040-01-392-2345
Mechanical Drive Housing

013922345
12376138: RNCC: 3 | RNVC: 2

26 Jun 1994

3040-01-392-5378
Piston Ring

013925378
32T06500-46-1.0: RNCC: 3 | RNVC: 9
32T06500-46-1: RNCC: 5 | RNVC: 2
32T06500-46-1.0: RNCC: 5 | RNVC: 9
32T06500-46-1.0: RNCC: 5 | RNVC: 9

1 Jul 1994

3040-01-392-5379
Piston Ring

013925379
32T09500-46-1.0: RNCC: 3 | RNVC: 2
32T09500-46-1.0: RNCC: 5 | RNVC: 2
32T09500-46-1.0: RNCC: 5 | RNVC: 9
004C1222: RNCC: 5 | RNVC: 9
004D1222-1: RNCC: 7 | RNVC: 2

1 Jul 1994

3040-01-392-2463
Worm Shaft

013922463
50004-1: RNCC: 3 | RNVC: 2
40010 ITEM NO.12: RNCC: 5 | RNVC: 2
40010-12: RNCC: 5 | RNVC: 2
40010: RNCC: D | RNVC: 9

26 Jun 1994

3040-01-394-2679
Piston Rod Ring

013942679
MC14926: RNCC: 3 | RNVC: 2
MC14926: RNCC: 5 | RNVC: 9

5 Aug 1994

3040-01-396-1530
Pawl

013961530
40014-2: RNCC: 3 | RNVC: 2
40015 ITEM 5: RNCC: 3 | RNVC: 2
40014: RNCC: D | RNVC: 9
40015: RNCC: D | RNVC: 9

14 Sep 1994

3040-01-397-1233
Remote Control Lever

013971233
211042825: RNCC: 3 | RNVC: 2
6404316 FIND 63: RNCC: 5 | RNVC: 2
566-6404316 FIND 63: RNCC: 5 | RNVC: 2

3 Oct 1994

3040-01-396-5073
Shaft Collar

013965073
2HS508: RNCC: 3 | RNVC: 2
2HS508: RNCC: 5 | RNVC: 9
2000014: RNCC: 5 | RNVC: 9

21 Sep 1994

3040-01-398-3978
Bulkhead Adapter

013983978
300673: RNCC: 3 | RNVC: 2
300673: RNCC: 5 | RNVC: 2
300673: RNCC: 5 | RNVC: 9

1 Nov 1994

3040-01-399-5695
Shouldered Shaft

013995695
36-155-052: RNCC: 3 | RNVC: 2
1022-02-D P 4: RNCC: 5 | RNVC: 2

30 Nov 1994

3040-01-399-6284
Shouldered Shaft

013996284
74D291033-2027: RNCC: 3 | RNVC: 2
74D291033: RNCC: 5 | RNVC: 9

1 Dec 1994

3040-01-406-2294
Rigid Connecting Link

014062294
1339AS237-1: RNCC: 3 | RNVC: 2
1339AS237: RNCC: D | RNVC: 9

23 Dec 1994

3040-01-407-7605
Straight Shaft

014077605
R21256: RNCC: 3 | RNVC: 2
S23-02346: RNCC: 3 | RNVC: 2
L650444-1: RNCC: 3 | RNVC: 2

4 Feb 1995

3040-01-408-1025
Manual Control Lever

014081025
75192-01A: RNCC: 3 | RNVC: 2
75192-01A: RNCC: 5 | RNVC: 2
75192-01A: RNCC: 5 | RNVC: 2
2HS283: RNCC: C | RNVC: 1

10 Feb 1995

3040-01-407-9328
Shouldered Shaft

014079328
5210486: RNCC: 3 | RNVC: 2

7 Feb 1995

3040-01-407-9326
Straight Axle

014079326
5210428: RNCC: 3 | RNVC: 2

7 Feb 1995

3040-01-409-1248
Friction Lining

014091248
561-6404325-20: RNCC: 3 | RNVC: 2
211072018: RNCC: 3 | RNVC: 2

6 Mar 1995

3040-01-410-8071
Spur Gearshaft

014108071
8661598: RNCC: 3 | RNVC: 2
5743360: RNCC: 3 | RNVC: 2
8661598: RNCC: 5 | RNVC: 9
3040PL0739456: RNCC: 6 | RNVC: 9

12 Mar 1995

3040-01-410-8834
Linear Actuating Cylinder Piston

014108834
6519132: RNCC: 3 | RNVC: 2
6519086 PIECE 4: RNCC: 5 | RNVC: 2

14 Mar 1995

3040-01-412-1690
Manual Control Lever

014121690
104552-7: RNCC: 3 | RNVC: 2
104552-7: RNCC: C | RNVC: 1

12 Apr 1995

3040-01-412-7611
Spline Adapter

014127611
A15PS257-4: RNCC: 1 | RNVC: 2
118041-4: RNCC: 3 | RNVC: 2
118041-4: RNCC: 5 | RNVC: 2
118041-4: RNCC: 5 | RNVC: 9
118041: RNCC: D | RNVC: 9
A15PS257: RNCC: D | RNVC: 9

27 Apr 1995

3040-01-413-8866
Shaft Retaining Plate

014138866
3915490: RNCC: 3 | RNVC: 2
02/911524: RNCC: 5 | RNVC: 2
3915490: RNCC: 5 | RNVC: 2

24 May 1995

3040-01-414-1236
Shouldered Shaft

014141236
4B994C-01: RNCC: 3 | RNVC: 2
4B994C: RNCC: 5 | RNVC: 2
4B994C: RNCC: 5 | RNVC: 9
4B994C-01: RNCC: 5 | RNVC: 9

31 May 1995

3040-01-413-8263
Shouldered Shaft

014138263
585-5361566 ITEM 3: RNCC: 3 | RNVC: 2
585-5361566: RNCC: D | RNVC: 9

23 May 1995

3040-01-417-2271
Piston Rod Guide

014172271
211082: RNCC: 3 | RNVC: 2
211082: RNCC: 5 | RNVC: 2
211082: RNCC: 5 | RNVC: 2

3 Aug 1995

3040-01-416-6786
Shouldered Shaft

014166786
G9784: RNCC: 3 | RNVC: 2

24 Jul 1995

3040-01-417-4969
Helical Gearshaft

014174969
6252500: RNCC: 3 | RNVC: 2
62525: RNCC: 5 | RNVC: 9

8 Aug 1995

3040-01-417-4979
Straight Shaft

014174979
21110-1004-1: RNCC: 3 | RNVC: 2
21110-8: RNCC: 5 | RNVC: 9
21110: RNCC: D | RNVC: 9

8 Aug 1995

3040-01-418-0283
Cylinder Support

014180283
2193111-1: RNCC: 3 | RNVC: 2
2193111-1: RNCC: 3 | RNVC: 9
2193111: RNCC: D | RNVC: 9

18 Aug 1995

3040-01-418-0063
Remote Control Lever

014180063
ED00927R0140-S: RNCC: 3 | RNVC: 9
7792671: RNCC: 5 | RNVC: 9

18 Aug 1995

3040-01-419-3656
Linear Actuating Cylinder Assembly

014193656
MDL 2-1/2 HH-A223: RNCC: 3 | RNVC: 2
2-1/2 HH-A223: RNCC: 3 | RNVC: 2

20 Sep 1995

3040-01-420-1931
Control Cam

014201931
3497-011-000: RNCC: 3 | RNVC: 2

11 Oct 1995

3040-01-421-0032
Piston Ring

014210032
3253350-275: RNCC: 3 | RNVC: 2
32G02750-42: RNCC: 3 | RNVC: 2
3798349 FIND 7: RNCC: 5 | RNVC: 2
3798349: RNCC: D | RNVC: 9

30 Oct 1995

3040-01-421-9649
Mechanical Drive Housing

014219649
903-5912047PC1: RNCC: 3 | RNVC: 2
903-5912047: RNCC: D | RNVC: 9

17 Nov 1995

3040-01-422-1297
Trans Pum Protector

014221297
J-38739-1: RNCC: 3 | RNVC: 2

22 Nov 1995

3040-01-422-7751
Straight Shaft

014227751
3227-30460: RNCC: 3 | RNVC: 2
3227-3046-6: RNCC: 5 | RNVC: 2
01682920: RNCC: 5 | RNVC: 9

8 Dec 1995

3040-01-422-5559
Rigid Connecting Link

014225559
4607-507: RNCC: 3 | RNVC: 2
17B9F1112-507: RNCC: 5 | RNVC: 2

4 Dec 1995

3040-01-422-8323
Shouldered Shaft

014228323
7861-188-000: RNCC: 3 | RNVC: 2

9 Dec 1995

3040-01-432-4494
Linear Actuating Cylinder Piston

014324494
66750-056036: RNCC: 3 | RNVC: 2

6 Jun 1996

3040-01-433-8694
Mechanical Guide

014338694
752-6406847-16: RNCC: 3 | RNVC: 2
DF1706-433 FN16: RNCC: 5 | RNVC: 9
6406847 FIND 16: RNCC: C | RNVC: 1
6406847: RNCC: D | RNVC: 9

12 Jul 1996

3040-01-434-5142
Shouldered Shaft

014345142
21199: RNCC: 3 | RNVC: 2
21199: RNCC: 5 | RNVC: 1

1 Aug 1996

3040-01-435-4903
Nonaircraft Mechanical Actuator

014354903
21344-1007-1: RNCC: 3 | RNVC: 2
21344 FIND NO.11: RNCC: 5 | RNVC: 9
21344: RNCC: D | RNVC: 9

26 Aug 1996

3040-01-425-6290
Bevel Gearshaft

014256290
423D1257-1: RNCC: 3 | RNVC: 2

26 Feb 1996

3040-01-428-5743
Body Hub

014285743
029563-1: RNCC: 3 | RNVC: 9
029563-1: RNCC: 5 | RNVC: 2

28 Mar 1996

3040-01-428-5744
Shouldered Shaft

014285744
029565-501: RNCC: 3 | RNVC: 2
029565-501: RNCC: 5 | RNVC: 9

28 Mar 1996

3040-01-429-1275
Shouldered Shaft

014291275
10T01301-0002: RNCC: 3 | RNVC: 9
15A00403-0000-62: RNCC: 5 | RNVC: 9
10T01301-0002: RNCC: C | RNVC: 1

5 Apr 1996

3040-01-429-3397
Shouldered Shaft

014293397
7C3260: RNCC: 3 | RNVC: 2

9 Apr 1996

3040-01-428-7179
Shouldered Shaft

014287179
029566-1: RNCC: 3 | RNVC: 9
029566-1: RNCC: 5 | RNVC: 2

1 Apr 1996

3040-01-428-7181
Cylinder Support

014287181
3141AS298-1: RNCC: 3 | RNVC: 9

1 Apr 1996

3040-01-430-7297
Counterbalance Weight

014307297
030-188: RNCC: 3 | RNVC: 2
FS30-188: RNCC: D | RNVC: 9

2 May 1996

3040-01-431-4042
Rigid Connecting Link

014314042
214-010-573-103: RNCC: 3 | RNVC: 2

13 May 1996

3040-01-431-9092
Flexible Shaft Assembly

014319092
22001-100-88 IN.: RNCC: 3 | RNVC: 2
22001-100-7 FT 4 IN.: RNCC: 5 | RNVC: 9
B-400-22001-100-88 IN.: RNCC: 5 | RNVC: 9
B-800-22001-100-88 IN.: RNCC: 5 | RNVC: 9
22001-100 X 7'4: RNCC: 5 | RNVC: 9
22001: RNCC: D | RNVC: 9

21 May 1996

3040-01-431-6697
Shouldered Shaft

014316697
5000904: RNCC: 3 | RNVC: 2
B229 REP NO.26: RNCC: 5 | RNVC: 9
B102-4: RNCC: 5 | RNVC: 9
B229: RNCC: D | RNVC: 9

16 May 1996

3040-01-436-5796
Shaft Collar

014365796
93300573-1: RNCC: 3 | RNVC: 2
93300573: RNCC: D | RNVC: 9

23 Sep 1996

3040-01-436-6726
Straight Shaft

014366726
3141AS442-1: RNCC: 3 | RNVC: 2
3141AS442-1: RNCC: 5 | RNVC: 2
3141AS442-1: RNCC: 5 | RNVC: 9
3141AS442-1: RNCC: C | RNVC: 1
3141AS442: RNCC: D | RNVC: 9

25 Sep 1996

3040-01-437-0751
Straight Shaft

014370751
029213-1: RNCC: 3 | RNVC: 2
029213-1: RNCC: 3 | RNVC: 9
029213-1: RNCC: C | RNVC: 1
029213: RNCC: D | RNVC: 9

4 Oct 1996

3040-01-437-2309
Control Cam

014372309
489 4684-003: RNCC: 3 | RNVC: 2
12-0005A-01: RNCC: 3 | RNVC: 9
12-0005A: RNCC: D | RNVC: 9

8 Oct 1996

3040-01-438-0382
Body Hub

014380382
3305AS421-1: RNCC: 3 | RNVC: 2
3305AS421-1: RNCC: 5 | RNVC: 2
3305AS421: RNCC: D | RNVC: 9

29 Oct 1996

3040-01-438-8093
Linear Actuating Cylinder Assembly

014388093
7A8-08502: RNCC: 3 | RNVC: 2
7D3-05076 IT NO 3: RNCC: 5 | RNVC: 2
CA946: RNCC: 5 | RNVC: 9
TG10GWXXXXACA946: RNCC: 5 | RNVC: 9
7D3-05076: RNCC: D | RNVC: 9

20 Nov 1996

3040-01-439-3984
Counterbalance Weight

014393984
3342164-1: RNCC: 3 | RNVC: 2

6 Dec 1996

3040-01-440-1841
Control Cam

014401841
XA-07150-L: RNCC: 3 | RNVC: 2
XA-07150-L: RNCC: 5 | RNVC: 2
XA-07150-L: RNCC: 5 | RNVC: 2
FW35 SERIES: RNCC: D | RNVC: 9

7 Jan 1997

3040-01-438-7792
Linear Actuating Cylinder Assembly

014387792
6623295: RNCC: 3 | RNVC: 2
6615003: RNCC: 5 | RNVC: 9
6623295: RNCC: 5 | RNVC: 9

19 Nov 1996

3040-01-442-8627
Shaft Collar

014428627
3020560: RNCC: 3 | RNVC: 2

26 Mar 1997

3040-01-442-9089
Shouldered Shaft Assembly

014429089
3179625-1: RNCC: 3 | RNVC: 2

26 Mar 1997

3040-01-443-5134
Rigid Connecting Link

014435134
4643-675-G: RNCC: 3 | RNVC: 2
4643-675: RNCC: 3 | RNVC: 9
17B9F1112-675: RNCC: 5 | RNVC: 2

11 Apr 1997

3040-01-443-7564
Control Cam

014437564
88-11-14: RNCC: 3 | RNVC: 2
805-1623944 PC 20: RNCC: 5 | RNVC: 2
88-71-14: RNCC: C | RNVC: 1
1623944: RNCC: D | RNVC: 9

17 Apr 1997

3040-01-444-3165
Shouldered Shaft

014443165
901-033-806-101: RNCC: 3 | RNVC: 2

5 May 1997

3040-01-444-3351
Linear Actuating Cylinder Assembly Parts Kit

014443351
AD41945-1: RNCC: 3 | RNVC: 2
AD41945-1: RNCC: 5 | RNVC: 2

5 May 1997

3040-01-447-4891
Shouldered Shaft

014474891
20974: RNCC: 3 | RNVC: 2

7 Aug 1997

3040-01-448-4897
Hydraulic Accumulator

014484897
3142218-1: RNCC: 3 | RNVC: 2
3142218-1: RNCC: 7 | RNVC: 2

29 Aug 1997

3040-01-448-8168
Shouldered Shaft

014488168
941C565H01: RNCC: 3 | RNVC: 2
1395F01G01 PC 20: RNCC: 5 | RNVC: 2
941C565: RNCC: D | RNVC: 9

10 Sep 1997

3040-01-448-9204
Disk Brake Shoe Set

014489204
71112353: RNCC: 3 | RNVC: 2

15 Sep 1997

3040-01-449-5677
Inlet Exhau Housing

014495677
3502127-2: RNCC: 3 | RNVC: 2
3502127-1: RNCC: 5 | RNVC: 9
10183258: RNCC: 6 | RNVC: 9
3502127: RNCC: D | RNVC: 9

6 Oct 1997

3040-01-451-3530
Linear Actuating Cylinder Assembly

014513530
SPSHP331 5/8X2: RNCC: 3 | RNVC: 2
5266616: RNCC: 5 | RNVC: 2
SHP-331: RNCC: 5 | RNVC: 9

13 Dec 1997

3040-01-451-9840
Straight Shaft

014519840
EJ-21281: RNCC: 3 | RNVC: 2
EJ51121 ITEM NO. 9: RNCC: 5 | RNVC: 2
EJ51121: RNCC: D | RNVC: 9

12 Jan 1998

3040-01-452-2051
Linear Actuating Cylinder

014522051
13223730: RNCC: 3 | RNVC: 2
13223730: RNCC: 8 | RNVC: 1

21 Jan 1998

3040-01-452-5025
Straight Shaft Assembly

014525025
6181435-1: RNCC: 3 | RNVC: 2
6181435-1: RNCC: 5 | RNVC: 2

28 Jan 1998

3040-01-453-2903
Bell Crank

014532903
3036AS515: RNCC: 3 | RNVC: 2
3036AS515: RNCC: 5 | RNVC: 2
3036AS515: RNCC: 5 | RNVC: 2
3036AS515: RNCC: 5 | RNVC: 2
3036AS515: RNCC: 5 | RNVC: 2

25 Feb 1998

3040-01-453-8311
Shouldered Shaft

014538311
604-06-0900: RNCC: 3 | RNVC: 2
C6-186: RNCC: 3 | RNVC: 2
M-3142-13: RNCC: 5 | RNVC: 2
604-06-0900-1: RNCC: 5 | RNVC: 9
M-3142: RNCC: D | RNVC: 9

11 Mar 1998

3040-01-454-0609
Friction Lining

014540609
321534-63 NON ASBESTOS: RNCC: 3 | RNVC: 2
321534-63 NON ASBESTOS: RNCC: 3 | RNVC: 9
7B1-06580: RNCC: 5 | RNVC: 2
7B1-06580: RNCC: 5 | RNVC: 9

18 Mar 1998

3040-01-454-1547
Rigid Connecting Link

014541547
4082309: RNCC: 1 | RNVC: 2
LK4-4014: RNCC: 3 | RNVC: 2
4082309-01: RNCC: 3 | RNVC: 2
4082309-01: RNCC: 3 | RNVC: 2
179093: RNCC: 5 | RNVC: 9
4082309-01: RNCC: 5 | RNVC: 9
4048594: RNCC: 5 | RNVC: 9
4061896: RNCC: 5 | RNVC: 9
4082309-01: RNCC: 5 | RNVC: 9
4024313: RNCC: 5 | RNVC: 9

20 Mar 1998

3040-01-453-8729
Nonrotating Shaft Eye Bracket

014538729
3036AS610: RNCC: 3 | RNVC: 2
3036AS610: RNCC: 5 | RNVC: 2
3036AS610: RNCC: 5 | RNVC: 2
3036AS610: RNCC: 5 | RNVC: 2
3036AS610: RNCC: 5 | RNVC: 2

12 Mar 1998

3040-01-454-5034
Rigid Connecting Link

014545034
74A656021-1005: RNCC: 3 | RNVC: 2
74A656021-1005: RNCC: 5 | RNVC: 9

2 Apr 1998

3040-01-455-2625
Rigid Connecting Link

014552625
74A172201-1004: RNCC: 3 | RNVC: 2

27 Apr 1998

3040-01-455-6956
Rigid Connecting Link

014556956
L48034P01: RNCC: 3 | RNVC: 2
L48034: RNCC: D | RNVC: 9

12 May 1998

3040-01-445-3038
Shouldered Shaft

014453038
609120-30RE: RNCC: 3 | RNVC: 9

29 May 1997

3040-01-445-9101
Control Cam

014459101
29122: RNCC: 3 | RNVC: 2

17 Jun 1997

Load More Results