What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 117 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 117 of 300

3040-01-451-6465
Bell Crank

014516465
4084170: RNCC: 3 | RNVC: 2
4084170: RNCC: 5 | RNVC: 2
4084170: RNCC: 5 | RNVC: 2
3040PL0669907: RNCC: 6 | RNVC: 9
4081404: RNCC: E | RNVC: 8
4065917: RNCC: E | RNVC: 8

23 Dec 1997

3040-01-452-3905
Body Hub

014523905
12412199: RNCC: 3 | RNVC: 2
12332555: RNCC: 5 | RNVC: 9

26 Jan 1998

3040-01-452-7983
Shaft Collar

014527983
950326-12: RNCC: 3 | RNVC: 2
950326-12: RNCC: 3 | RNVC: 2
950326-12: RNCC: 5 | RNVC: 2
950326-12: RNCC: 5 | RNVC: 9

6 Feb 1998

3040-01-453-3258
Brake Disc

014533258
9609-0049: RNCC: 3 | RNVC: 2
PAL250-ABK1: RNCC: C | RNVC: 1

26 Feb 1998

3040-01-454-2303
Push-Pull Control Assembly

014542303
C1615Z-35 FT: RNCC: 3 | RNVC: 2
C1615Z: RNCC: D | RNVC: 9

24 Mar 1998

3040-01-453-9654
Rigid Connecting Link

014539654
12460597: RNCC: 3 | RNVC: 2

14 Mar 1998

3040-01-454-2845
Linear Actuating Cylinder Piston

014542845
36829: RNCC: 3 | RNVC: 2
15082-38805 ITEM 11: RNCC: 5 | RNVC: 2
15082-38805: RNCC: D | RNVC: 9

25 Mar 1998

3040-01-455-1786
Shaft Collar

014551786
00RC150: RNCC: 3 | RNVC: 9
RC-150: RNCC: 5 | RNVC: 9

24 Apr 1998

3040-01-455-4487
Straight Shaft

014554487
2741296-1-1: RNCC: 3 | RNVC: 2

4 May 1998

3040-01-446-9974
Quill Shaft Stop

014469974
65391-11330-101: RNCC: 3 | RNVC: 2
65391-11330: RNCC: D | RNVC: 9

23 Jul 1997

3040-01-447-3039
Cargo D Dog Spindle

014473039
56W44-SK-8504 PC 16: RNCC: 3 | RNVC: 2
56W44-SK-8504: RNCC: D | RNVC: 9

1 Aug 1997

3040-01-444-2410
Shouldered Shaft

014442410
901-011-464-103: RNCC: 3 | RNVC: 2

1 May 1997

3040-01-450-6713
Straight Shaft

014506713
IM-0426-003: RNCC: 3 | RNVC: 2
IM-1642-S18-B25-A24 FIND NO.13: RNCC: 5 | RNVC: 2
IM-1642-S18-B25-A24: RNCC: D | RNVC: 9

18 Nov 1997

3040-01-371-0407
Linear Actuating Cylinder Assembly

013710407
CYSR 2480 HY84T2B150100063990: RNCC: 3 | RNVC: 9
8707,C042: RNCC: 5 | RNVC: 9
89156933: RNCC: 5 | RNVC: 9

5 Feb 1993

3040-01-371-1339
Piston Rod Ring

013711339
7753000185: RNCC: 3 | RNVC: 2
1952-2250-750: RNCC: 3 | RNVC: 2
2CT348: RNCC: 5 | RNVC: 2
7-753-000185: RNCC: 5 | RNVC: 2
7-753-000185: RNCC: 5 | RNVC: 2
7-753-000185: RNCC: 5 | RNVC: 2
2CT348: RNCC: 5 | RNVC: 9
1952-2250-750: RNCC: 5 | RNVC: 9
1952-2250-750: RNCC: 5 | RNVC: 9
7-753-000185: RNCC: 5 | RNVC: 9

6 Feb 1993

3040-01-371-7761
Counterbalance Weight

013717761
CBCA-LIN: RNCC: 3 | RNVC: 2
40105157: RNCC: 5 | RNVC: 2

23 Feb 1993

3040-01-371-8927
Shaft Collar

013718927
211029395: RNCC: 3 | RNVC: 1
563-6404328 FIND 21: RNCC: 5 | RNVC: 1
DF6002-413 FN 21: RNCC: 5 | RNVC: 1

25 Feb 1993

3040-01-372-0119
Rigid Connecting Link

013720119
SW33296: RNCC: 3 | RNVC: 2

27 Feb 1993

3040-01-372-3903
Shouldered Shaft

013723903
184209-001: RNCC: 3 | RNVC: 9
184209-001: RNCC: 5 | RNVC: 2
184209-001: RNCC: 5 | RNVC: 9

9 Mar 1993

3040-01-373-0149
Linear Actuating Cylinder Assembly

013730149
9-242-010144: RNCC: 3 | RNVC: 2
9-242-010144: RNCC: 5 | RNVC: 2
9-242-010144: RNCC: 5 | RNVC: 2

25 Mar 1993

3040-01-375-1455
Shaft Collar

013751455
12417757: RNCC: 3 | RNVC: 2
12417757: RNCC: 5 | RNVC: 2
106.107: RNCC: 5 | RNVC: 2
12417757: RNCC: 5 | RNVC: 2

6 May 1993

3040-01-377-2852
Rigid Connecting Link

013772852
5361663 ITEM 32: RNCC: 3 | RNVC: 2
5361663: RNCC: D | RNVC: 9

12 Jul 1993

3040-01-377-3959
Bell Crank

013773959
1534AS179: RNCC: 3 | RNVC: 2
1534AS179: RNCC: 5 | RNVC: 2
1534AS179: RNCC: 5 | RNVC: 2
1534AS179: RNCC: 5 | RNVC: 2
1534AS179: RNCC: 5 | RNVC: 2
1534AS179: RNCC: 5 | RNVC: 9
1534AS179: RNCC: 5 | RNVC: 9
D013406-501: RNCC: 5 | RNVC: 9
1534AS179: RNCC: 5 | RNVC: 9
D013406-501: RNCC: 5 | RNVC: 9

15 Jul 1993

3040-01-376-9898
Pawl

013769898
563-6404329-89: RNCC: 3 | RNVC: 2
563-7409379-89: RNCC: C | RNVC: 1

2 Jul 1993

3040-01-379-4864
Shouldered Shaft

013794864
801-6406709 FIND 39: RNCC: 3 | RNVC: 2
801-6406709-39: RNCC: 5 | RNVC: 2
211052690: RNCC: 5 | RNVC: 2

31 Aug 1993

3040-01-379-9202
Breather

013799202
BF-2041 W/ST.ST.CAP: RNCC: 3 | RNVC: 2
BF-2041SC: RNCC: 5 | RNVC: 9
BF-2041: RNCC: C | RNVC: 1
11237-05: RNCC: D | RNVC: 9

10 Sep 1993

3040-01-383-2293
Rigid Connecting Link

013832293
2HS929: RNCC: 3 | RNVC: 2
2HS929: RNCC: 5 | RNVC: 9
R1897: RNCC: 5 | RNVC: 9

19 Nov 1993

3040-01-382-6572
Piston Ring

013826572
3177980-2: RNCC: 3 | RNVC: 2
10107291: RNCC: 6 | RNVC: 9

5 Nov 1993

3040-01-383-5520
Shouldered Shaft

013835520
106-B2743: RNCC: 3 | RNVC: 2

25 Nov 1993

3040-01-384-0820
Breather

013840820
T044000101: RNCC: 3 | RNVC: 2
4400-101: RNCC: 5 | RNVC: 2
A1199-1394: RNCC: 5 | RNVC: 9
4400-101: RNCC: 5 | RNVC: 9

8 Dec 1993

3040-01-385-8938
Manual Control Lever

013858938
08650120: RNCC: 3 | RNVC: 9
K-70-VHB: RNCC: 5 | RNVC: 9
K-70-VHB: RNCC: 5 | RNVC: 9
08650120: RNCC: C | RNVC: 1

21 Jan 1994

3040-01-386-3443
Hub Clamp

013863443
SP6SS: RNCC: 3 | RNVC: 2
912S0112-1: RNCC: 5 | RNVC: 2
912S0112: RNCC: 7 | RNVC: 2

3 Feb 1994

3040-01-386-5692
Shaft Retaining Plate

013865692
SW26683: RNCC: 3 | RNVC: 2

8 Feb 1994

3040-01-386-8315
Spline Adapter

013868315
24569: RNCC: 3 | RNVC: 2

16 Feb 1994

3040-01-387-7224
Flexible Shaft Assembly Core

013877224
57353-65: RNCC: 3 | RNVC: 2
573-65: RNCC: 5 | RNVC: 9

10 Mar 1994

3040-01-387-7227
Flexible Shaft Assembly Core

013877227
57353-00 FOR 119 FT: RNCC: 3 | RNVC: 2
57353-119: RNCC: 5 | RNVC: 2

10 Mar 1994

3040-01-390-4530
Disk Brake Shoe

013904530
ML50K-834A: RNCC: 3 | RNVC: 2
ML50K-834A: RNCC: 5 | RNVC: 2
ML50K-834: RNCC: 5 | RNVC: 9
ML50K-834A: RNCC: 5 | RNVC: 9

19 May 1994

3040-01-396-2827
Body Hub

013962827
12361749: RNCC: 3 | RNVC: 2

16 Sep 1994

3040-01-397-5846
Counterbalance Weight

013975846
717512027-001: RNCC: 3 | RNVC: 2

14 Oct 1994

3040-01-398-5422
Brake Assembly

013985422
548590-0002: RNCC: 3 | RNVC: 9
548590-0002: RNCC: 5 | RNVC: 9

4 Nov 1994

3040-01-399-0888
Shouldered Shaft

013990888
623840: RNCC: 3 | RNVC: 2

16 Nov 1994

3040-01-399-0939
Shouldered Shaft

013990939
3930AS681: RNCC: 3 | RNVC: 2
74A733032-2005: RNCC: 5 | RNVC: 9
74A733032-2003: RNCC: 5 | RNVC: 9
74A733032-2005: RNCC: 5 | RNVC: 9
74A733032: RNCC: 5 | RNVC: 9
3930AS681: RNCC: C | RNVC: 1

16 Nov 1994

3040-01-407-4228
Rotating Shaft Eye Bracket

014074228
12149-501: RNCC: 3 | RNVC: 2
S25268-512: RNCC: 5 | RNVC: 9
25268-512: RNCC: 5 | RNVC: 9
50135-512: RNCC: C | RNVC: 1

27 Jan 1995

3040-01-407-4670
Mechanically Actuated Spindle

014074670
17125: RNCC: 3 | RNVC: 2
SKB-429 ITEM 245: RNCC: 5 | RNVC: 2

28 Jan 1995

3040-01-408-0197
Pawl

014080197
74A420601-1005: RNCC: 3 | RNVC: 2
74A420601-1005: RNCC: 5 | RNVC: 2
74A420601-1005: RNCC: 5 | RNVC: 9
10107294: RNCC: 6 | RNVC: 9

8 Feb 1995

3040-01-408-5654
Shouldered Shaft

014085654
479620-01: RNCC: 3 | RNVC: 2
479620: RNCC: D | RNVC: 9

21 Feb 1995

3040-01-411-6254
Shouldered Shaft

014116254
211060289: RNCC: 3 | RNVC: 2
561-6404325-28: RNCC: 5 | RNVC: 2
561-6404325: RNCC: D | RNVC: 9

28 Mar 1995

3040-01-412-2665
Straight Shaft

014122665
12364817: RNCC: 3 | RNVC: 2
12364817: RNCC: 5 | RNVC: 2

14 Apr 1995

3040-01-412-7608
Spline Adapter

014127608
A15PS257-5: RNCC: 3 | RNVC: 2
118041-5: RNCC: 5 | RNVC: 2
118041-5: RNCC: 5 | RNVC: 9
118041: RNCC: D | RNVC: 9
A15PS257: RNCC: D | RNVC: 9

27 Apr 1995

3040-01-412-9609
Flexible Shaft Assembly

014129609
B-416-8897-103X15FT: RNCC: 3 | RNVC: 2
8897-103X15FT: RNCC: 3 | RNVC: 2
500-6574890 FIND NO.70 15FT: RNCC: 5 | RNVC: 2
8897 ASSY B-416-8897-103X15FT: RNCC: 5 | RNVC: 2

3 May 1995

3040-01-413-3587
Shouldered Shaft

014133587
3168811-1: RNCC: 3 | RNVC: 2
014133587: RNCC: 3 | RNVC: 2
10107296: RNCC: 6 | RNVC: 9

11 May 1995

3040-01-414-4091
Straight Shaft

014144091
46472: RNCC: 3 | RNVC: 2
S1-73: RNCC: 5 | RNVC: 9

7 Jun 1995

3040-01-414-8566
Shouldered Shaft

014148566
24525: RNCC: 3 | RNVC: 2

15 Jun 1995

3040-01-415-4723
Push-Pull Control Assembly

014154723
CC33212: RNCC: 3 | RNVC: 2
301947-03-144.0: RNCC: 5 | RNVC: 2
301947-003-12FT: RNCC: 5 | RNVC: 9
301947-003-12FT: RNCC: 5 | RNVC: 9
301947-003-144: RNCC: C | RNVC: 1

28 Jun 1995

3040-01-415-4383
Straight Shaft

014154383
55244-61: RNCC: 3 | RNVC: 2
OV2G55244-W3C DET 10: RNCC: 5 | RNVC: 2
OV2G55244-W3C: RNCC: D | RNVC: 9

27 Jun 1995

3040-01-415-9465
Shouldered Shaft Assembly

014159465
318F1894D2: RNCC: 3 | RNVC: 2

10 Jul 1995

3040-01-416-3238
Piston Ring Set

014163238
S30926-326-1: RNCC: 3 | RNVC: 9
S30926-326-1: RNCC: 5 | RNVC: 2

17 Jul 1995

3040-01-416-5965
Straight Shaft

014165965
21185-1002-1: RNCC: 3 | RNVC: 2
21185 FIND 13: RNCC: 5 | RNVC: 9

21 Jul 1995

3040-01-417-2712
Push-Pull Control Assembly

014172712
88103-1: RNCC: 3 | RNVC: 2
88103-1: RNCC: 3 | RNVC: 9
88103-1: RNCC: 5 | RNVC: 9
88103-1: RNCC: 5 | RNVC: 9
88103-1: RNCC: 5 | RNVC: 9
88103: RNCC: D | RNVC: 9

3 Aug 1995

3040-01-417-2730
Breather

014172730
26-0204-06: RNCC: 1 | RNVC: 2
MBGG: RNCC: 3 | RNVC: 2

3 Aug 1995

3040-01-417-7521
Linear Actuating Cylinder Piston Rod

014177521
53028: RNCC: 3 | RNVC: 9
52602 PIECE 13: RNCC: 5 | RNVC: 9
52602: RNCC: D | RNVC: 9

14 Aug 1995

3040-01-418-3138
Rigid Connecting Link

014183138
901-301-014-109: RNCC: 3 | RNVC: 2
C-01037-109: RNCC: 5 | RNVC: 9

24 Aug 1995

3040-01-418-4036
Rigid Connecting Link

014184036
26-0501-09A: RNCC: 3 | RNVC: 2
26-0501-09A: RNCC: 3 | RNVC: 9
26-0501-09A/B: RNCC: D | RNVC: 9

25 Aug 1995

3040-01-419-0523
Worm Shaft

014190523
300296: RNCC: 3 | RNVC: 9
818223: RNCC: 5 | RNVC: 9
300296: RNCC: C | RNVC: 1
300296PL FIND 1: RNCC: D | RNVC: 9

12 Sep 1995

3040-01-419-7097
Nonrotating Shaft Eye Bracket

014197097
12366200: RNCC: 3 | RNVC: 2
12366200: RNCC: 5 | RNVC: 2
12366200: RNCC: 5 | RNVC: 2

28 Sep 1995

3040-01-419-9852
Shaft Retaining Plate

014199852
27I00314: RNCC: 3 | RNVC: 2

5 Oct 1995

3040-01-419-4687
Remote Control Lever

014194687
12365627: RNCC: 3 | RNVC: 2
12365627: RNCC: 5 | RNVC: 2
12365627: RNCC: 5 | RNVC: 9
12365627: RNCC: D | RNVC: 9

22 Sep 1995

3040-01-420-1165
Shouldered Shaft

014201165
566-6404314-10: RNCC: 3 | RNVC: 2
DF-2018-62 FN 10: RNCC: 5 | RNVC: 9
6404314: RNCC: D | RNVC: 9

6 Oct 1995

3040-01-422-1302
Seal Inserter And Remover

014221302
J-38739-2: RNCC: 3 | RNVC: 2

22 Nov 1995

3040-01-421-1600
Extension Shaft

014211600
523032-1: RNCC: 3 | RNVC: 2
523032: RNCC: D | RNVC: 9

2 Nov 1995

3040-01-422-5600
Shouldered Shaft

014225600
SNS-4265-30004: RNCC: 3 | RNVC: 2
SNS-4265 POS F: RNCC: 5 | RNVC: 2

4 Dec 1995

3040-01-423-7471
Shouldered Shaft

014237471
2527738: RNCC: 3 | RNVC: 2

9 Jan 1996

3040-01-423-8527
Shouldered Shaft

014238527
320-1499-000: RNCC: 3 | RNVC: 2
3201499000: RNCC: 5 | RNVC: 2
PC1204-10: RNCC: 5 | RNVC: 9

12 Jan 1996

3040-01-432-5703
Grease Cap

014325703
1898-2-858: RNCC: 3 | RNVC: 2

10 Jun 1996

3040-01-432-6583
Shouldered Axle

014326583
7575101-001: RNCC: 3 | RNVC: 2
7575101: RNCC: D | RNVC: 9

11 Jun 1996

3040-01-432-9416
Remote Control Lever

014329416
12283279-2: RNCC: 3 | RNVC: 2
12283279: RNCC: 5 | RNVC: 1
12283279: RNCC: D | RNVC: 9
12283279: RNCC: E | RNVC: 8

18 Jun 1996

3040-01-433-8121
Rigid Connecting Link

014338121
26-0501-09B: RNCC: 3 | RNVC: 2
26-0501-09A/B: RNCC: D | RNVC: 9

11 Jul 1996

3040-01-433-8144
Bevel-Spur Gearshaft

014338144
654115: RNCC: 3 | RNVC: 2
654115: RNCC: 5 | RNVC: 9

11 Jul 1996

3040-01-432-6163
Bell Crank Support

014326163
145S1877-1: RNCC: 3 | RNVC: 2

10 Jun 1996

3040-01-432-7304
Grease Cap

014327304
3262-X-388: RNCC: 3 | RNVC: 9

13 Jun 1996

3040-01-434-0720
Pawl

014340720
4660896: RNCC: 3 | RNVC: 2
4660896: RNCC: 3 | RNVC: 9
4660896: RNCC: 5 | RNVC: 2

18 Jul 1996

3040-01-434-3005
Push-Pull Control Assembly

014343005
515MVR003-088M: RNCC: 3 | RNVC: 2
515-MV-RT/RT-3IN-7FT4IN: RNCC: 5 | RNVC: 1
211079551: RNCC: 5 | RNVC: 9
211094800: RNCC: 5 | RNVC: 9
515-6409323-15: RNCC: 5 | RNVC: 9
DA2730-870 FN15: RNCC: 5 | RNVC: 9

25 Jul 1996

3040-01-434-6170
Alternator Adapter

014346170
E8CR134-002: RNCC: 3 | RNVC: 2
E8CR134-002: RNCC: 5 | RNVC: 9

2 Aug 1996

3040-01-434-7498
Shouldered Shaft

014347498
31856: RNCC: 3 | RNVC: 2
31856: RNCC: 3 | RNVC: 9

6 Aug 1996

3040-01-423-7901
Pawl

014237901
1211179-106: RNCC: 3 | RNVC: 2

10 Jan 1996

3040-01-425-2089
Piston Ring Set

014252089
750-11272: RNCC: 3 | RNVC: 2
750-11272: RNCC: 5 | RNVC: 9

14 Feb 1996

3040-01-425-6860
Control Cam

014256860
593-6405216 FIND 18: RNCC: 3 | RNVC: 2
DF7501-101: RNCC: 5 | RNVC: 1
211074804: RNCC: 5 | RNVC: 2
6405216: RNCC: D | RNVC: 9

26 Feb 1996

3040-01-428-4428
Straight Shaft

014284428
6-810-003046: RNCC: 3 | RNVC: 2
5HD759: RNCC: 5 | RNVC: 2
5HD759: RNCC: 5 | RNVC: 9

27 Mar 1996

3040-01-426-7881
Shouldered Shaft

014267881
23-06110: RNCC: 3 | RNVC: 2
23-06110: RNCC: 3 | RNVC: 9
23-06110: RNCC: 5 | RNVC: 2
589-6953255 ITEM 3 REV C: RNCC: 5 | RNVC: 9
589-6953255 ITE: RNCC: 5 | RNVC: 9
589-6953261: RNCC: 5 | RNVC: 9

18 Mar 1996

3040-01-428-5784
Shouldered Shaft

014285784
3141AS292-1: RNCC: 3 | RNVC: 9
3141AS292-1: RNCC: 5 | RNVC: 2
3040PL0669758: RNCC: 6 | RNVC: 9

28 Mar 1996

3040-01-428-5748
Shouldered Shaft

014285748
029569-1: RNCC: 3 | RNVC: 2
029569-1: RNCC: 5 | RNVC: 9
3040PL0893359: RNCC: 6 | RNVC: 9

28 Mar 1996

3040-01-428-5764
Shaft Collar

014285764
3141AS153-1: RNCC: 3 | RNVC: 9
3141AS153-1: RNCC: 5 | RNVC: 2
3141AS153-1: RNCC: 5 | RNVC: 2

28 Mar 1996

3040-01-429-1297
Linear Actuating Cylinder Piston

014291297
45A221-P5: RNCC: 3 | RNVC: 2
2BC836: RNCC: 3 | RNVC: 2
2BC836: RNCC: 5 | RNVC: 9
45A221-P5: RNCC: 5 | RNVC: 9

5 Apr 1996

3040-01-429-4299
Shouldered Shaft

014294299
7-0112-01: RNCC: 3 | RNVC: 2
NF16383: RNCC: 5 | RNVC: 2

10 Apr 1996

3040-01-436-0147
Rigid Connecting Link

014360147
0288.0016.C: RNCC: 3 | RNVC: 2

9 Sep 1996

3040-01-436-9555
Remote Control Lever

014369555
3305AS403-1: RNCC: 3 | RNVC: 2
3305AS403-1: RNCC: 5 | RNVC: 2
3305AS403-1: RNCC: 5 | RNVC: 9
3305AS403-1: RNCC: C | RNVC: 1
3305AS403: RNCC: D | RNVC: 9

2 Oct 1996

3040-01-436-9590
Rigid Connecting Link

014369590
026124-1: RNCC: 3 | RNVC: 2
026124-1: RNCC: 5 | RNVC: 9
026124-1: RNCC: C | RNVC: 1
026124: RNCC: D | RNVC: 9

2 Oct 1996

3040-01-437-6035
Hydraulic Cylinder Sleeve

014376035
SH-92-B-25: RNCC: 3 | RNVC: 2
CA951 ITEM 3: RNCC: 5 | RNVC: 9
CA951: RNCC: D | RNVC: 9

18 Oct 1996

3040-01-437-6130
Shouldered Shaft

014376130
880134-3: RNCC: 3 | RNVC: 2

18 Oct 1996

3040-01-437-8112
Bell Crank

014378112
12420564: RNCC: 3 | RNVC: 2
12420564: RNCC: 5 | RNVC: 2
12420564: RNCC: D | RNVC: 9

24 Oct 1996

3040-01-437-3975
Nonrotating Shaft Eye Bracket

014373975
029537-1: RNCC: 3 | RNVC: 2
029537-1: RNCC: 5 | RNVC: 9
029537-1: RNCC: C | RNVC: 1
029537: RNCC: D | RNVC: 9

11 Oct 1996

3040-01-438-6556
Shouldered Shaft

014386556
5-72163-1: RNCC: 3 | RNVC: 2

14 Nov 1996

3040-01-438-3790
Shouldered Shaft

014383790
2B1-1775-1: RNCC: 3 | RNVC: 2
2D3-05667 ITEM 208: RNCC: 5 | RNVC: 2
2B1-1775: RNCC: D | RNVC: 9
2D3-05667: RNCC: D | RNVC: 9

6 Nov 1996

3040-01-438-8050
Linear Actuating Cylinder Assembly

014388050
6623297: RNCC: 3 | RNVC: 2
6615023: RNCC: 5 | RNVC: 9
6623297: RNCC: 5 | RNVC: 9

20 Nov 1996

3040-01-439-3662
Control Cable Assembly

014393662
12447180: RNCC: 3 | RNVC: 2
0724807: RNCC: 5 | RNVC: 2
6001009: RNCC: 5 | RNVC: 9
6001016: RNCC: 5 | RNVC: 9
3040PL1449740: RNCC: 6 | RNVC: 9

5 Dec 1996

3040-01-439-5184
Straight Shaft

014395184
5356-008: RNCC: 3 | RNVC: 2

11 Dec 1996

3040-01-440-4547
Manual Control Lever

014404547
382-812-020-401-044: RNCC: 3 | RNVC: 2
CDS 1007-103-39-941 GEAR UNIT: RNCC: 5 | RNVC: 2
1007-103-39-941: RNCC: D | RNVC: 9

14 Jan 1997

3040-01-439-2009
Straight Shaft

014392009
6616553: RNCC: 3 | RNVC: 2
6616553: RNCC: 5 | RNVC: 9

2 Dec 1996

3040-01-440-5740
Rigid Connecting Link

014405740
3642-043: RNCC: 3 | RNVC: 2

17 Jan 1997

3040-01-441-1292
Spur Gearshaft

014411292
34961: RNCC: 3 | RNVC: 2

4 Feb 1997

3040-01-441-6467
Ram Cylinder Plate

014416467
11643719: RNCC: 3 | RNVC: 2

19 Feb 1997

3040-01-440-5823
Breather

014405823
RB-07-10-00: RNCC: 3 | RNVC: 9
S/O 2999 ITEM 11: RNCC: 5 | RNVC: 2
RB-075-10-0: RNCC: 5 | RNVC: 9
RB-075-10-00: RNCC: 5 | RNVC: 9

17 Jan 1997

3040-01-442-2907
Manual Control Lever

014422907
02182600: RNCC: 3 | RNVC: 2
1676AS230-1: RNCC: 5 | RNVC: 2
09-0708: RNCC: 5 | RNVC: 9
3040PL0642706: RNCC: 6 | RNVC: 9
1676AS230: RNCC: 7 | RNVC: 2

11 Mar 1997

3040-01-443-9349
Mechanical Drive Housing

014439349
11579926: RNCC: 3 | RNVC: 2

23 Apr 1997

3040-01-444-3204
Shouldered Shaft

014443204
901-047-580-103: RNCC: 3 | RNVC: 2

5 May 1997

3040-01-444-3248
Shouldered Shaft

014443248
901-047-580-105: RNCC: 3 | RNVC: 2

5 May 1997

3040-01-449-9450
Straight Shaft

014499450
512-6404653-63: RNCC: 3 | RNVC: 2
512-6404652-51: RNCC: 5 | RNVC: 2
DF6503-175 FIND 63: RNCC: 5 | RNVC: 9
6404653: RNCC: D | RNVC: 9

21 Oct 1997

3040-01-446-3684
Straight Shaft

014463684
32209: RNCC: 3 | RNVC: 2
32209: RNCC: 5 | RNVC: 9

1 Jul 1997

3040-01-450-3297
Piston Rod Guide

014503297
211054095: RNCC: 3 | RNVC: 2
754-6405244 FIND 9: RNCC: 5 | RNVC: 2

4 Nov 1997

3040-01-452-0662
Rigid Connecting Link

014520662
17P2G5003-1: RNCC: 3 | RNVC: 2

14 Jan 1998

3040-01-452-6133
Remote Control Lever

014526133
1287347: RNCC: 3 | RNVC: 2

2 Feb 1998

3040-01-452-7741
Control Cam

014527741
EJ21232: RNCC: 3 | RNVC: 2
EJ51121 ITEM NO. 8: RNCC: 5 | RNVC: 2
EJ51121: RNCC: D | RNVC: 9

6 Feb 1998

3040-01-452-9065
Mechanical Drive Housing

014529065
5714222: RNCC: 3 | RNVC: 2
21063: RNCC: 5 | RNVC: 2
3040PL0765007: RNCC: 6 | RNVC: 9

12 Feb 1998

3040-01-453-8796
Extension Shaft

014538796
13786: RNCC: 3 | RNVC: 2
A6210680: RNCC: 5 | RNVC: 2
A6210680: RNCC: 5 | RNVC: 9
13786: RNCC: 5 | RNVC: 9

12 Mar 1998

3040-01-454-7112
Shaft Collar

014547112
12463610: RNCC: 3 | RNVC: 2
12463610: RNCC: D | RNVC: 9

10 Apr 1998

3040-01-455-2325
Manual Control Lever

014552325
68-99-217: RNCC: 3 | RNVC: 2
11478687-12: RNCC: 5 | RNVC: 2
11478687: RNCC: D | RNVC: 9

27 Apr 1998

3040-01-455-3606
Rigid Connecting Link

014553606
74A400574-1001: RNCC: 3 | RNVC: 2
74A400574-1001: RNCC: 5 | RNVC: 9

30 Apr 1998

3040-01-456-4504
Rigid Connecting Link

014564504
12524579: RNCC: 3 | RNVC: 2

12 Jun 1998

3040-01-370-2964
Remote Control Lever

013702964
4150939: RNCC: 3 | RNVC: 9
346106: RNCC: 5 | RNVC: 2
346106: RNCC: 5 | RNVC: 9

17 Jan 1993

3040-01-371-7855
Rigid Connecting Link

013717855
SW33813: RNCC: 3 | RNVC: 2

23 Feb 1993

3040-01-372-4958
Straight Shaft

013724958
9-557-010313: RNCC: 3 | RNVC: 2
9-557-010313: RNCC: 5 | RNVC: 2
9-557-010313: RNCC: 5 | RNVC: 2

11 Mar 1993

3040-01-375-7323
Nonaircraft Mechanical Actuator

013757323
12417481: RNCC: 3 | RNVC: 2
12417481: RNCC: 3 | RNVC: 9
12417481: RNCC: 5 | RNVC: 2
85.62680.5702: RNCC: 5 | RNVC: 2
85.62680.5702: RNCC: 5 | RNVC: 2
115200340060: RNCC: 5 | RNVC: 9
115200340060: RNCC: 5 | RNVC: 9
115200340060: RNCC: 5 | RNVC: 9
12417481: RNCC: 5 | RNVC: 9

20 May 1993

3040-01-376-2066
Piston Rod Ring

013762066
S34280-501: RNCC: 3 | RNVC: 2
S34280-501: RNCC: 5 | RNVC: 9

28 May 1993

3040-01-377-3110
Ball Joint

013773110
523130-1: RNCC: 3 | RNVC: 1
523130-1: RNCC: 3 | RNVC: 2
523130: RNCC: D | RNVC: 9

12 Jul 1993

3040-01-378-3878
Straight Shaft

013783878
561-6404326-30: RNCC: 3 | RNVC: 2

12 Aug 1993

3040-01-379-4618
Piston Follower Cup

013794618
2014600200: RNCC: 3 | RNVC: 2
147898: RNCC: 5 | RNVC: 9
126460-350: RNCC: 5 | RNVC: 9

31 Aug 1993

3040-01-380-9031
Hydraulic Cyl Nut

013809031
87024A0012: RNCC: 3 | RNVC: 2
87024A0012: RNCC: 5 | RNVC: 2

29 Sep 1993

3040-01-382-2069
Rigid Connecting Link

013822069
AM2791-9-3: RNCC: 3 | RNVC: 2
10107289: RNCC: 6 | RNVC: 9

29 Oct 1993

3040-01-382-7108
Plain Shoe Assembly

013827108
9-0993-2: RNCC: 3 | RNVC: 2
0993-2: RNCC: 5 | RNVC: 9
470993-001-T1: RNCC: 5 | RNVC: 9
471017PN1: RNCC: 5 | RNVC: 9
9-0993-1X2: RNCC: 5 | RNVC: 9

8 Nov 1993

3040-01-382-7131
Instrumentation Shoe Assembly

013827131
9-1017-1X2: RNCC: 3 | RNVC: 2
471017PN2: RNCC: 5 | RNVC: 2
471017PN1,2: RNCC: 5 | RNVC: 2

8 Nov 1993

3040-01-383-5107
Transmission Sleeve

013835107
752-6405258-197: RNCC: 3 | RNVC: 2

25 Nov 1993

3040-01-385-6848
Mechanical Drive Housing

013856848
12376140: RNCC: 3 | RNVC: 2

16 Jan 1994

3040-01-383-8672
Linear Actuating Cylinder Piston

013838672
518-4674765 ITEM 4MOD: RNCC: 3 | RNVC: 2
518-4674765 ITE: RNCC: C | RNVC: 1

4 Dec 1993

3040-01-387-7195
Worm Shaft

013877195
820240-42: RNCC: 3 | RNVC: 9
820240 ASSY 820240-42: RNCC: 5 | RNVC: 9
906010PL REV.E FIND 15,42 TO 1: RNCC: 5 | RNVC: 9
901010-1-6-01PL FD NO 15: RNCC: C | RNVC: 1
820240-42: RNCC: C | RNVC: 1
820240: RNCC: D | RNVC: 9

10 Mar 1994

3040-01-387-7172
Linear Actuating Cylinder

013877172
SC103483: RNCC: 3 | RNVC: 2
F103483: RNCC: 5 | RNVC: 9

10 Mar 1994

3040-01-388-4692
Linear Actuating Cylinder Assembly

013884692
5WHP48KAOU29137: RNCC: 3 | RNVC: 2
5WHP48KA: RNCC: 3 | RNVC: 9
5WHP48KAOU29137-1: RNCC: 5 | RNVC: 9

31 Mar 1994

3040-01-389-4216
Shouldered Shaft

013894216
98230A1: RNCC: 3 | RNVC: 2

24 Apr 1994

3040-01-390-8203
Mechanical Drive Housing

013908203
6519140: RNCC: 3 | RNVC: 2
6519087 PIECE 6: RNCC: 5 | RNVC: 2
6519087: RNCC: D | RNVC: 9

27 May 1994

3040-01-390-2726
Shaft Collar

013902726
22839.220-1: RNCC: 3 | RNVC: 2
24998.200FIND7: RNCC: 5 | RNVC: 2

16 May 1994

3040-01-391-0862
Extension Shaft

013910862
3113AS654-1: RNCC: 3 | RNVC: 2
3113AS654: RNCC: D | RNVC: 9

3 Jun 1994

3040-01-397-7029
Shouldered Shaft

013977029
83568: RNCC: 3 | RNVC: 2
83568: RNCC: 5 | RNVC: 2

18 Oct 1994

3040-01-399-4237
Rigid Connecting Link

013994237
12351810-1: RNCC: 3 | RNVC: 2
12351810: RNCC: D | RNVC: 9

24 Nov 1994

3040-01-409-0083
Straight Shaft

014090083
211064637: RNCC: 3 | RNVC: 2
585-6406620-57: RNCC: 5 | RNVC: 2
585-6406620: RNCC: D | RNVC: 9

3 Mar 1995

3040-01-409-0113
Hub Clamp

014090113
1709AS673-01: RNCC: 3 | RNVC: 2
L24CPS0008A10: RNCC: 5 | RNVC: 2
549187: RNCC: 5 | RNVC: 2
1709AS673: RNCC: 7 | RNVC: 2

3 Mar 1995

3040-01-409-2500
Rigid Connecting Link

014092500
12460146: RNCC: 3 | RNVC: 2
12460146: RNCC: 5 | RNVC: 2
6003143: RNCC: 5 | RNVC: 9
6003173: RNCC: 5 | RNVC: 9
5342PL0737683: RNCC: 6 | RNVC: 9

8 Mar 1995

3040-01-411-4241
Grease Cap

014114241
903-5912046PC4: RNCC: 3 | RNVC: 2
903-5912046PC4: RNCC: 5 | RNVC: 9
903-5912046: RNCC: D | RNVC: 9

24 Mar 1995

3040-01-411-8480
Shouldered Shaft

014118480
12365639: RNCC: 3 | RNVC: 2
12365639: RNCC: 5 | RNVC: 2
12365639: RNCC: 5 | RNVC: 2

3 Apr 1995

3040-01-411-4186
Speedometer-Tachometer Drive Adapter

014114186
AC-1818.250: RNCC: 3 | RNVC: 2
106002A: RNCC: 5 | RNVC: 2
106002A: RNCC: 7 | RNVC: 9
A-9443: RNCC: D | RNVC: 9

24 Mar 1995

3040-01-413-2533
Flexible Shaft Assembly

014132533
8897-103X7FT: RNCC: 3 | RNVC: 2
500-6574890 FIND 70 103X7FT: RNCC: 5 | RNVC: 2
8897 ASSY B-416-8897-103X7FT: RNCC: 5 | RNVC: 2
B-416-8897-103X7FT: RNCC: 5 | RNVC: 9
8897: RNCC: D | RNVC: 9

10 May 1995

3040-01-413-2543
Flexible Shaft Assembly

014132543
8897-103X9FT: RNCC: 3 | RNVC: 2
B-416-8897-103X9FT: RNCC: 3 | RNVC: 9
8897 ASSY B-416-8897-103X9FT: RNCC: 5 | RNVC: 2
500-6574890 FIND 70 103X9FT: RNCC: 5 | RNVC: 2
8897: RNCC: D | RNVC: 9

10 May 1995

3040-01-413-4020
Lever Fitting

014134020
7E0156: RNCC: 3 | RNVC: 2
7E0156: RNCC: 5 | RNVC: 2
7E0156: RNCC: 5 | RNVC: 2
3040014134020: RNCC: 5 | RNVC: 9

12 May 1995

3040-01-413-8913
Shouldered Shaft

014138913
845-6556524: RNCC: 3 | RNVC: 2
845-6603141-75: RNCC: 5 | RNVC: 2

24 May 1995

3040-01-414-0405
Straight Shaft

014140405
31108: RNCC: 3 | RNVC: 2
31108: RNCC: C | RNVC: 1

30 May 1995

3040-01-414-1238
Shaft Collar

014141238
4B997C-01: RNCC: 3 | RNVC: 9
4B997C-01: RNCC: 5 | RNVC: 9
4B997C: RNCC: 5 | RNVC: 9

31 May 1995

3040-01-416-4006
Rotating Shaft Eye Bracket

014164006
12149-503: RNCC: 3 | RNVC: 2

18 Jul 1995

3040-01-417-2787
Spur Gearshaft

014172787
593-6960891 PC 13: RNCC: 3 | RNVC: 2
6960891: RNCC: D | RNVC: 9

3 Aug 1995

3040-01-417-6696
Hub Clamp

014176696
903-5912051PC1AND2: RNCC: 3 | RNVC: 2
5912051: RNCC: D | RNVC: 9

11 Aug 1995

3040-01-418-2068
Shouldered Shaft

014182068
21220-1006-1: RNCC: 3 | RNVC: 2
21346 FIND 6: RNCC: 5 | RNVC: 9
21346: RNCC: D | RNVC: 9

22 Aug 1995

3040-01-418-3135
Rigid Connecting Link

014183135
901-301-014-103: RNCC: 3 | RNVC: 2
C-01037-103: RNCC: 5 | RNVC: 9

24 Aug 1995

3040-01-418-9339
Gear Operator Spring Guide

014189339
21343-1005-1: RNCC: 3 | RNVC: 2
21343-9: RNCC: 5 | RNVC: 9
21343: RNCC: D | RNVC: 9

8 Sep 1995

3040-01-420-2503
Rigid Connecting Link

014202503
364-25363-000: RNCC: 3 | RNVC: 2
364-47668-000-29: RNCC: 5 | RNVC: 2
364-25363B000: RNCC: 5 | RNVC: 9

12 Oct 1995

3040-01-420-8447
Thrust Bearing Shoe

014208447
11.12-1007-1: RNCC: 3 | RNVC: 2
11.12-5385-1: RNCC: 5 | RNVC: 2
471007-1: RNCC: 5 | RNVC: 2

26 Oct 1995

3040-01-422-0219
Seal Inserter And Remover

014220219
J-38731-2A: RNCC: 3 | RNVC: 2
J-38731-2: RNCC: 5 | RNVC: 9

20 Nov 1995

3040-01-422-1318
Trans Seal Sm Sizer

014221318
J-38736-4: RNCC: 3 | RNVC: 2

22 Nov 1995

3040-01-422-0840
Push-Pull Control Assembly

014220840
7-07-276: RNCC: 3 | RNVC: 2
183-L-TG-2-64: RNCC: 5 | RNVC: 2
183-L-TG-2-64: RNCC: 5 | RNVC: 9

21 Nov 1995

3040-01-422-1293
Trans Sea Protector

014221293
J-38732-1: RNCC: 3 | RNVC: 2
38732: RNCC: 5 | RNVC: 2

22 Nov 1995

3040-01-422-2857
Straight Shaft Assembly

014222857
3210-7001-5: RNCC: 3 | RNVC: 2
01558110: RNCC: 5 | RNVC: 9

28 Nov 1995

3040-01-422-3961
Multiple Gears Gearshaft

014223961
29503953: RNCC: 3 | RNVC: 2
29503953: RNCC: 3 | RNVC: 9
2GK807: RNCC: C | RNVC: 1
23013298: RNCC: C | RNVC: 1

1 Dec 1995

3040-01-422-8373
Remote Control Lever

014228373
4407-532: RNCC: 3 | RNVC: 2

9 Dec 1995

3040-01-423-2963
Shaft Retaining Plate

014232963
12437109: RNCC: 3 | RNVC: 2

20 Dec 1995

3040-01-423-7802
Nonrotating Shaft Eye Bracket

014237802
WCC442 RIGHT: RNCC: 3 | RNVC: 2
2-4005-C FIND NO. 15: RNCC: 5 | RNVC: 2
2-4005-A FIND NO. 15: RNCC: 5 | RNVC: 2
2-4005-B FIND NO. 15: RNCC: 5 | RNVC: 2
2-4312-9 FIND NO 13: RNCC: C | RNVC: 1
WCC442: RNCC: D | RNVC: 9
2-4005-A: RNCC: D | RNVC: 9
2-4005-B: RNCC: D | RNVC: 9

10 Jan 1996

3040-01-424-0781
Mechanical Drive Housing Part

014240781
3168613-1: RNCC: 3 | RNVC: 2
3168613-1: RNCC: 3 | RNVC: 9

19 Jan 1996

3040-01-433-1805
Disk Brake Shoe

014331805
244770: RNCC: 3 | RNVC: 2
244770: RNCC: 3 | RNVC: 9

24 Jun 1996

3040-01-433-7086
Mechanical Drive Housing

014337086
212-040-506-5: RNCC: 3 | RNVC: 2
212-040-506: RNCC: D | RNVC: 9

10 Jul 1996

3040-01-435-0809
Remote Control Lever

014350809
372-X-180: RNCC: 3 | RNVC: 2
372-X-180: RNCC: 5 | RNVC: 2

13 Aug 1996

3040-01-434-8708
Remote Control Lever

014348708
4P7596: RNCC: 3 | RNVC: 2
4P7596: RNCC: 5 | RNVC: 2
4P7596: RNCC: 5 | RNVC: 2

9 Aug 1996

3040-01-435-2246
Rigid Connecting Link

014352246
366211-2: RNCC: 3 | RNVC: 2
366211-2: RNCC: 5 | RNVC: 9

16 Aug 1996

3040-01-426-2659
Shaft Collar

014262659
3141AS434-1: RNCC: 3 | RNVC: 2
3141AS434-1: RNCC: 5 | RNVC: 9
3141AS434-1: RNCC: C | RNVC: 1

7 Mar 1996

3040-01-426-7156
Control Cam

014267156
12592954: RNCC: 3 | RNVC: 2

16 Mar 1996

3040-01-428-3196
Shouldered Shaft

014283196
211069179: RNCC: 3 | RNVC: 2
595-6401267 ITEM 19: RNCC: 5 | RNVC: 2
595-6401597-1: RNCC: 5 | RNVC: 2
6401597: RNCC: D | RNVC: 9
6401267: RNCC: D | RNVC: 9

25 Mar 1996

3040-01-429-8354
Fluid Passage Bolt

014298354
12577050: RNCC: 3 | RNVC: 2

19 Apr 1996

3040-01-436-5922
Straight Shaft

014365922
99278-901: RNCC: 3 | RNVC: 2
029221-1: RNCC: 5 | RNVC: 9
029221-1: RNCC: 5 | RNVC: 9
029221-1: RNCC: C | RNVC: 1
029221: RNCC: D | RNVC: 9

23 Sep 1996

3040-01-436-9818
Linear Actuating Cylinder Assembly

014369818
TH4007224PA: RNCC: 3 | RNVC: 2
3075AS151-1: RNCC: 5 | RNVC: 9
3075AS151-1: RNCC: 7 | RNVC: 2

3 Oct 1996

3040-01-437-3613
Rigid Connecting Link

014373613
7001076: RNCC: 3 | RNVC: 2

10 Oct 1996

3040-01-437-5637
Rigid Connecting Link

014375637
9938M48G06: RNCC: 3 | RNVC: 2
9938M48G06: RNCC: 5 | RNVC: 2
9938M48G06: RNCC: 5 | RNVC: 2
9938M48G06: RNCC: 5 | RNVC: 9
9938M48G06: RNCC: 5 | RNVC: 9
9938M48G06QQ: RNCC: 5 | RNVC: 9

17 Oct 1996

3040-01-438-4458
Straight Shaft

014384458
310H580: RNCC: 3 | RNVC: 2

7 Nov 1996

3040-01-439-0182
Shaft Collar

014390182
C37-3250-028-1800: RNCC: 3 | RNVC: 2
NSP-00192 PC 14: RNCC: 5 | RNVC: 2
NSP-00192: RNCC: D | RNVC: 9

25 Nov 1996

3040-01-439-0601
Pawl

014390601
3501845-10: RNCC: 3 | RNVC: 2
3501845-10: RNCC: 3 | RNVC: 2
3502701-4 ITEM 3: RNCC: C | RNVC: 1
3502701: RNCC: D | RNVC: 9
3501845: RNCC: D | RNVC: 9

26 Nov 1996

3040-01-439-1708
Stop Door Plate

014391708
3047418: RNCC: 3 | RNVC: 2
3047418: RNCC: 5 | RNVC: 9

29 Nov 1996

3040-01-440-0962
Linear Actuating Cylinder Assembly Parts Kit

014400962
50413563: RNCC: 3 | RNVC: 2
413563: RNCC: 3 | RNVC: 2

2 Jan 1997

3040-01-440-3699
Hydraulic Accumulator Bladder

014403699
R978713135: RNCC: 3 | RNVC: 2
9 534 232 025: RNCC: 5 | RNVC: 9
9 534 232 025: RNCC: 5 | RNVC: 9
9 534 232 025: RNCC: 5 | RNVC: 9

12 Jan 1997

3040-01-440-4693
Manual Control Lever

014404693
4476-037: RNCC: 3 | RNVC: 2

14 Jan 1997

3040-01-440-4653
Hub Clamp

014404653
561-6404325-190: RNCC: 3 | RNVC: 2
DF2018-470#190: RNCC: 5 | RNVC: 9
DF2018-470: RNCC: D | RNVC: 9
6404325: RNCC: D | RNVC: 9

14 Jan 1997

3040-01-440-7132
Remote Control Lever

014407132
7B1-06949: RNCC: 3 | RNVC: 2
7D3-05815 IT NO. 23: RNCC: 5 | RNVC: 2
7D3-05815: RNCC: D | RNVC: 9

22 Jan 1997

3040-01-441-5132
Push-Pull Control Assembly

014415132
515MV003-089M: RNCC: 3 | RNVC: 2
211080669: RNCC: 3 | RNVC: 2
515-MV-FT/FT-3IN-7FT5IN-MARINE: RNCC: 5 | RNVC: 2
515-6406435-63: RNCC: C | RNVC: 1

14 Feb 1997

3040-01-442-6251
Po Clutch Half Assy

014426251
83638-3: RNCC: 3 | RNVC: 2
83638: RNCC: D | RNVC: 9

19 Mar 1997

3040-01-442-8206
Spur Gearshaft

014428206
24573: RNCC: 3 | RNVC: 2
24573: RNCC: 3 | RNVC: 9

25 Mar 1997

3040-01-446-3790
Shouldered Shaft

014463790
0311-961280: RNCC: 3 | RNVC: 2
AIN/0311 960280: RNCC: 5 | RNVC: 2
AIN/0311 961280: RNCC: 5 | RNVC: 2

1 Jul 1997

3040-01-447-1823
Counterbalance Weight

014471823
70219-01045-105: RNCC: 3 | RNVC: 2

29 Jul 1997

3040-01-447-1889
Shouldered Shaft

014471889
65391-11339-101: RNCC: 3 | RNVC: 2
65391-11339: RNCC: D | RNVC: 9

29 Jul 1997

3040-01-444-5078
Linear Actuating Cylinder Assembly

014445078
138515: RNCC: 3 | RNVC: 2
9-242-010142: RNCC: 5 | RNVC: 2
9-242-010142: RNCC: 5 | RNVC: 2
9-242-010142: RNCC: 5 | RNVC: 9

8 May 1997

3040-01-447-3034
Disc Brake Caliper Assembly

014473034
PD143351: RNCC: 3 | RNVC: 2
1103G62-5: RNCC: 5 | RNVC: 9
959E468-003: RNCC: 5 | RNVC: 9
GB9640451: RNCC: 5 | RNVC: 9
PD143351: RNCC: 5 | RNVC: 9
4-61928 REV F: RNCC: 5 | RNVC: 9
PD 1433-5-1: RNCC: 5 | RNVC: 9
PD1433-4: RNCC: 5 | RNVC: 9
9640451: RNCC: C | RNVC: 1

1 Aug 1997

3040-01-445-2919
Shouldered Shaft

014452919
2029AS422-11: RNCC: 3 | RNVC: 2

29 May 1997

3040-01-449-1434
Shouldered Shaft

014491434
21319-1003-1: RNCC: 3 | RNVC: 2
21319-9: RNCC: 5 | RNVC: 9
21319-1003: RNCC: 5 | RNVC: 9
21319: RNCC: D | RNVC: 9

22 Sep 1997

3040-01-449-6574
Housing Adapter

014496574
13230E4670: RNCC: 3 | RNVC: 2
S007DX1918AL: RNCC: 5 | RNVC: 2

9 Oct 1997

3040-01-445-5332
Rigid Connecting Link

014455332
81-11963IT.2: RNCC: 3 | RNVC: 1
LO5013: RNCC: 5 | RNVC: 2
81-11963: RNCC: D | RNVC: 9

4 Jun 1997

3040-01-450-2130
Shouldered Shaft

014502130
124-1553913 PART NO. 6: RNCC: 3 | RNVC: 2
152-1091 PART NO. 6: RNCC: 5 | RNVC: 9
1553913: RNCC: D | RNVC: 9

30 Oct 1997

3040-01-451-2402
Manual Control Lever

014512402
8100-1251-0192 PC 146: RNCC: 3 | RNVC: 2
8100-1251-0285 PT NO 82: RNCC: C | RNVC: 1
8100-1251-0192: RNCC: D | RNVC: 9

10 Dec 1997

3040-01-451-7965
Shouldered Shaft

014517965
129-1909: RNCC: 3 | RNVC: 2
5022491-0121: RNCC: 5 | RNVC: 2
921004: RNCC: 5 | RNVC: 9

5 Jan 1998

3040-01-452-0171
Straight Shaft

014520171
505013-00: RNCC: 3 | RNVC: 2
505001-000 ITEM 10: RNCC: 5 | RNVC: 2

13 Jan 1998

3040-01-455-2600
Rigid Connecting Link

014552600
4702-3: RNCC: 3 | RNVC: 2

27 Apr 1998

3040-01-456-4503
Rigid Connecting Link

014564503
12524577: RNCC: 3 | RNVC: 2

12 Jun 1998

3040-01-456-6935
Shouldered Shaft

014566935
13222E0083-2: RNCC: 3 | RNVC: 2
13222E0083: RNCC: D | RNVC: 9

23 Jun 1998

3040-01-396-7809
Piston Rod Guide

013967809
211096650: RNCC: 3 | RNVC: 2
6404316 FIND 77: RNCC: 5 | RNVC: 2
566-6404316 FIND 77: RNCC: 5 | RNVC: 2
211042827: RNCC: 5 | RNVC: 9

23 Sep 1994

3040-01-393-5242
Shaft Collar

013935242
3HD676: RNCC: 3 | RNVC: 2
1EG370: RNCC: 3 | RNVC: 9
2207-L-12: RNCC: 5 | RNVC: 2
2HK74: RNCC: 5 | RNVC: 9
3HD676: RNCC: 5 | RNVC: 9
1300580: RNCC: 5 | RNVC: 9
2207-M-13: RNCC: 5 | RNVC: 9
R801713: RNCC: 5 | RNVC: 9

21 Jul 1994

3040-01-416-0632
Shaft Retaining Plate

014160632
12364681: RNCC: 3 | RNVC: 2
12364681: RNCC: 5 | RNVC: 2
12364681: RNCC: 5 | RNVC: 9

12 Jul 1995

3040-01-415-6613
Straight Shaft

014156613
310H581: RNCC: 3 | RNVC: 2
310H581: RNCC: 5 | RNVC: 9

30 Jun 1995

3040-01-430-4130
Shouldered Shaft

014304130
12543756: RNCC: 3 | RNVC: 2
715530: RNCC: 5 | RNVC: 2
DAX16227: RNCC: 5 | RNVC: 2

29 Apr 1996

3040-01-443-6018
Rigid Connecting Link

014436018
5110T29G01: RNCC: 3 | RNVC: 2

14 Apr 1997

3040-01-444-2751
Shouldered Shaft

014442751
752-9598-001: RNCC: 3 | RNVC: 2
752-9598: RNCC: D | RNVC: 9

2 May 1997

3040-01-444-3266
Spline Adapter

014443266
901-047-661-101: RNCC: 3 | RNVC: 2

5 May 1997

3040-01-447-2910
Linear Actuating Cylinder Assembly

014472910
4043-40639-01: RNCC: 3 | RNVC: 9

1 Aug 1997

3040-01-444-8578
Rigid Connecting Link

014448578
901-364-202-101: RNCC: 1 | RNVC: 2
901-364-202-101: RNCC: 3 | RNVC: 2

19 May 1997

3040-01-447-4121
Straight Shaft

014474121
3574: RNCC: 3 | RNVC: 2

5 Aug 1997

3040-01-454-5829
Housing Connection

014545829
250-D0057: RNCC: 3 | RNVC: 2
218-C0105: RNCC: 5 | RNVC: 9

6 Apr 1998

3040-01-454-5033
Rigid Connecting Link

014545033
74A656021-1007: RNCC: 3 | RNVC: 2
74A656021-1007: RNCC: 5 | RNVC: 9

2 Apr 1998

3040-01-452-6913
Retainer Collar

014526913
EJ20006: RNCC: 3 | RNVC: 2
EJ-51117: RNCC: 5 | RNVC: 2
EJ5117B ITEM NO. 13: RNCC: 5 | RNVC: 9

4 Feb 1998

3040-01-452-7661
Rigid Connecting Link

014527661
803-6397269 PC12 ZINC COATED: RNCC: 3 | RNVC: 2

6 Feb 1998

3040-01-434-8000
Mechanical Drive Housing

014348000
5-57245-3: RNCC: 3 | RNVC: 2

7 Aug 1996

3040-01-452-1674
Shaft Retaining Plate

014521674
9-565-011393: RNCC: 3 | RNVC: 2
9-565-011393: RNCC: 5 | RNVC: 2
9-565-011393: RNCC: 5 | RNVC: 2

20 Jan 1998

3040-01-455-3582
Rigid Connecting Link

014553582
74A182201-1005: RNCC: 3 | RNVC: 2
74A182201-1003: RNCC: 5 | RNVC: 9

30 Apr 1998

3040-01-370-2893
Linear Actuating Cylinder Head

013702893
6-372-003519: RNCC: 3 | RNVC: 2
6-372-003519: RNCC: 5 | RNVC: 2
6-372-003519: RNCC: 5 | RNVC: 2

17 Jan 1993

3040-01-370-5485
Linear Actuating Cylinder Assembly

013705485
6-372-003474: RNCC: 3 | RNVC: 2
6-372-003474: RNCC: 5 | RNVC: 2
6-372-003474: RNCC: 5 | RNVC: 2

24 Jan 1993

3040-01-371-7752
Shouldered Axle

013717752
8909-263-001: RNCC: 3 | RNVC: 2
8909-263-001: RNCC: 5 | RNVC: 9

23 Feb 1993

3040-01-371-7856
Shaft Retaining Plate

013717856
259-D530-002L: RNCC: 3 | RNVC: 2

23 Feb 1993

3040-01-371-9115
Rigid Connecting Link

013719115
211036906: RNCC: 3 | RNVC: 1
DF6002-413 FN 14: RNCC: 5 | RNVC: 1
563-6404328 FIND 14: RNCC: 5 | RNVC: 1

25 Feb 1993

3040-01-371-9879
Extension Shaft

013719879
384-1697-00: RNCC: 3 | RNVC: 2

27 Feb 1993

3040-01-371-9114
Ball Joint

013719114
211069305: RNCC: 3 | RNVC: 1
DF6002-413 FN 13: RNCC: 5 | RNVC: 1
563-6404328 FIND 13: RNCC: 5 | RNVC: 1

25 Feb 1993

3040-01-372-2814
Linear Actuating Cylinder Assembly

013722814
1H000155249: RNCC: 3 | RNVC: 2
CYSR5000HY84T2B-600-3888-350-999: RNCC: 3 | RNVC: 9
8707 C015: RNCC: 5 | RNVC: 9

4 Mar 1993

3040-01-372-8300
Camlock Assembly

013728300
9-163-010005: RNCC: 3 | RNVC: 2
9-163-010005: RNCC: 5 | RNVC: 2
9-163-010005: RNCC: 5 | RNVC: 2

19 Mar 1993

3040-01-372-7046
Shaft Collar

013727046
2HL808: RNCC: 3 | RNVC: 2
2HL808: RNCC: 5 | RNVC: 9
2000003: RNCC: 5 | RNVC: 9

17 Mar 1993

3040-01-373-0500
Piston Ring

013730500
700079A: RNCC: 3 | RNVC: 2
2HS463: RNCC: 5 | RNVC: 2
2HS463: RNCC: 5 | RNVC: 9

26 Mar 1993

3040-01-373-6443
Piston Rod Ring

013736443
303249-3: RNCC: 3 | RNVC: 2
303249-3: RNCC: 5 | RNVC: 1
303249-3: RNCC: 5 | RNVC: 9
10107287: RNCC: 6 | RNVC: 9

8 Apr 1993

3040-01-374-3013
Straight Shaft

013743013
9-557-010312: RNCC: 3 | RNVC: 2
9-557-010312: RNCC: 5 | RNVC: 2
9-557-010312: RNCC: 5 | RNVC: 2

20 Apr 1993

3040-01-375-6341
Rigid Connecting Link

013756341
12417721-001: RNCC: 3 | RNVC: 2
12417721-001: RNCC: 3 | RNVC: 2
12417721-001: RNCC: 5 | RNVC: 2
12417721: RNCC: 5 | RNVC: 9
12417721: RNCC: D | RNVC: 9

16 May 1993

3040-01-375-7777
Shouldered Shaft

013757777
66910644-1: RNCC: 3 | RNVC: 2
66910644-1: RNCC: 5 | RNVC: 2
66910644-1: RNCC: 5 | RNVC: 9
66910644-1: RNCC: 5 | RNVC: 9
66910644: RNCC: D | RNVC: 9

20 May 1993

3040-01-374-7191
Shouldered Shaft

013747191
11750: RNCC: 3 | RNVC: 2
11750-G: RNCC: 5 | RNVC: 2
11750: RNCC: 5 | RNVC: 2
11750: RNCC: 5 | RNVC: 2
6HE91: RNCC: 5 | RNVC: 2
11750: RNCC: 5 | RNVC: 9

28 Apr 1993

3040-01-377-6615
Pawl

013776615
12389439: RNCC: 3 | RNVC: 2
12389439: RNCC: 5 | RNVC: 2

23 Jul 1993

3040-01-378-2253
Linear Actuating Cylinder Head

013782253
211035783: RNCC: 3 | RNVC: 2
563-6404329-41: RNCC: 3 | RNVC: 2
563-6404329: RNCC: D | RNVC: 9

12 Aug 1993

3040-01-382-6475
Dual Disk Brake

013826475
MRB5: RNCC: 3 | RNVC: 2
6780352: RNCC: 3 | RNVC: 2
MRB5: RNCC: 5 | RNVC: 2
MRB5: RNCC: 5 | RNVC: 9
MRB5: RNCC: C | RNVC: 1

5 Nov 1993

3040-01-382-6522
Linear Actuating Cylinder Assembly Parts Kit

013826522
S26060: RNCC: 3 | RNVC: 2
4-181J-SB-M: RNCC: 5 | RNVC: 2
4-181J-SB-M: RNCC: 5 | RNVC: 9
6227763: RNCC: D | RNVC: 9

5 Nov 1993

3040-01-381-4466
Shouldered Shaft

013814466
3041043: RNCC: 3 | RNVC: 2
3041043: RNCC: 5 | RNVC: 2

15 Oct 1993

3040-01-383-5042
Rigid Connecting Link

013835042
2046-0008: RNCC: 3 | RNVC: 2

25 Nov 1993

3040-01-383-5045
Shouldered Shaft

013835045
200090-001: RNCC: 3 | RNVC: 9
200090-001: RNCC: 5 | RNVC: 2
200090-001: RNCC: 5 | RNVC: 9
CB-200090-001: RNCC: 5 | RNVC: 9
200100 PIECE 22.0.9: RNCC: 5 | RNVC: 9
200000 PIECE 22.0.9: RNCC: 5 | RNVC: 9
200087 PIECE 009: RNCC: 5 | RNVC: 9
200090: RNCC: 5 | RNVC: 9

25 Nov 1993

3040-01-383-5212
Mechanical Drive Housing

013835212
2585644: RNCC: 3 | RNVC: 2

25 Nov 1993

3040-01-383-5168
Flexible Casing Coupling Nut

013835168
12811C18A: RNCC: 3 | RNVC: 2
12811C18A: RNCC: 5 | RNVC: 9
PL-12731F18ITEM164A: RNCC: 5 | RNVC: 9
12811C18: RNCC: 5 | RNVC: 9
PL-12731F18ITEM164A: RNCC: C | RNVC: 1

25 Nov 1993

3040-01-386-3453
Linear Actuating Cylinder Assembly Parts Kit

013863453
MPK-63: RNCC: 3 | RNVC: 2
MPK-63: RNCC: 5 | RNVC: 9

3 Feb 1994

3040-01-388-0239
Breather

013880239
DPS-40N06: RNCC: 3 | RNVC: 2
DPS-40N06: RNCC: 5 | RNVC: 9

17 Mar 1994

3040-01-386-9858
Shaft Retaining Plate

013869858
53Z-02-254: RNCC: 3 | RNVC: 2
53Z-02-254: RNCC: 5 | RNVC: 2
53Z-02-254: RNCC: D | RNVC: 9

21 Feb 1994

3040-01-388-1231
Linear Actuating Cylinder Cap

013881231
N38726: RNCC: 3 | RNVC: 2
21878N PC 23: RNCC: 5 | RNVC: 2
38726: RNCC: 5 | RNVC: 9

21 Mar 1994

3040-01-389-0278
Manual Control Lever

013890278
01327400: RNCC: 3 | RNVC: 2
01223601: RNCC: 3 | RNVC: 9
8162208: RNCC: 5 | RNVC: 2
8162208: RNCC: 5 | RNVC: 9

14 Apr 1994

3040-01-390-8212
Mechanically Actuated Spindle

013908212
A-3213-P-1758S: RNCC: 3 | RNVC: 2
A-3213-P-1758: RNCC: 5 | RNVC: 2
A-3213-P-1758: RNCC: 5 | RNVC: 2
A-3213-P-1758: RNCC: 5 | RNVC: 2
A-3213-P-1758: RNCC: 5 | RNVC: 9

27 May 1994

3040-01-390-6322
Straight Shaft

013906322
GD-1560PC13,17: RNCC: 3 | RNVC: 2

23 May 1994

3040-01-392-3875
Straight Axle

013923875
3202-Z-9932: RNCC: 3 | RNVC: 2
3202-Z-9932: RNCC: 5 | RNVC: 2
3202-Z-9932: RNCC: 5 | RNVC: 2

29 Jun 1994

3040-01-392-6984
Nonaircraft Mechanical Actuator

013926984
58202-03: RNCC: 3 | RNVC: 2
58202: RNCC: 5 | RNVC: 1
58202-3: RNCC: 5 | RNVC: 9

5 Jul 1994

3040-01-393-1611
Spline Adapter

013931611
10022 ITEM 5: RNCC: 3 | RNVC: 2
4005 PART 40050-1: RNCC: 5 | RNVC: 2
40050-1: RNCC: D | RNVC: 9

15 Jul 1994

3040-01-393-9750
Mechanical Drive Housing

013939750
387-3415-1: RNCC: 3 | RNVC: 9
387-3415-1: RNCC: 5 | RNVC: 9
387-3415-1: RNCC: C | RNVC: 1

30 Jul 1994

3040-01-397-5287
Rigid Connecting Link

013975287
4618-575: RNCC: 3 | RNVC: 2
17B9F1112-575: RNCC: 5 | RNVC: 2

13 Oct 1994

3040-01-398-5575
Flexible Shaft Assembly Casing

013985575
8407-301: RNCC: 3 | RNVC: 2
B409-8407-301: RNCC: 5 | RNVC: 9

5 Nov 1994

3040-01-398-8354
Rigid Connecting Link

013988354
12416447: RNCC: 3 | RNVC: 2
12416447: RNCC: 5 | RNVC: 2
12416447: RNCC: 5 | RNVC: 2

9 Nov 1994

3040-01-398-8448
Mechanical Drive Housing Part

013988448
9500-214: RNCC: 3 | RNVC: 2
V300-008 PIECE 22: RNCC: 5 | RNVC: 2
V300-008 NO22: RNCC: 5 | RNVC: 2

9 Nov 1994

3040-01-406-7759
Remote Control Lever

014067759
70302-02147-042: RNCC: 3 | RNVC: 2
3040PL1938563: RNCC: 6 | RNVC: 9

12 Jan 1995

3040-01-406-8807
Straight Shaft

014068807
5266416: RNCC: 3 | RNVC: 2

13 Jan 1995

3040-01-407-7568
Remote Control Lever

014077568
523324: RNCC: 3 | RNVC: 2

4 Feb 1995

3040-01-407-3637
Linear Actuating Cylinder Piston Rod

014073637
TG82MKKCA247: RNCC: 3 | RNVC: 2
CA247 ITEM 14: RNCC: 5 | RNVC: 9
CA247: RNCC: D | RNVC: 9

26 Jan 1995

3040-01-410-9976
Shouldered Shaft

014109976
30514: RNCC: 3 | RNVC: 2
30514: RNCC: 5 | RNVC: 9

16 Mar 1995

3040-01-409-0027
Body Hub

014090027
12284920-2: RNCC: 3 | RNVC: 2
12284920: RNCC: D | RNVC: 9
XM62837: RNCC: E | RNVC: 8
12284920-1: RNCC: E | RNVC: 8
12274727: RNCC: E | RNVC: 8

3 Mar 1995

3040-01-408-3171
Linear Actuating Cylinder Assembly Parts Kit

014083171
9-752-100812: RNCC: 3 | RNVC: 2
9-752-100812: RNCC: 5 | RNVC: 2
9-752-100812: RNCC: 5 | RNVC: 2

14 Feb 1995

3040-01-411-3005
Mechanical Drive Housing

014113005
73614F94: RNCC: 3 | RNVC: 2
74394F04: RNCC: 5 | RNVC: 2

22 Mar 1995

3040-01-413-1383
Housing Adapter

014131383
A-803-12528-4: RNCC: 3 | RNVC: 2
12528M P/N A-803-12528-04: RNCC: 5 | RNVC: 2
12156M1 P/N A-803-12528-4: RNCC: 5 | RNVC: 2
12156M1: RNCC: D | RNVC: 9

5 May 1995

3040-01-414-0399
Straight Shaft

014140399
31105: RNCC: 3 | RNVC: 2

30 May 1995

3040-01-415-4389
Rigid Connecting Link

014154389
15262000-001: RNCC: 3 | RNVC: 2
15262000-001: RNCC: 3 | RNVC: 9
15261000 ITEM NO 12: RNCC: 5 | RNVC: 9
15261000: RNCC: D | RNVC: 9

27 Jun 1995

3040-01-416-6778
Manual Control Lever

014166778
12368325: RNCC: 3 | RNVC: 2
12368325: RNCC: 3 | RNVC: 2

24 Jul 1995

3040-01-417-8486
Remote Control Lever

014178486
12364497-2: RNCC: 3 | RNVC: 2
12364497-2: RNCC: 5 | RNVC: 2
12364497: RNCC: 5 | RNVC: 2
12364497: RNCC: D | RNVC: 9

16 Aug 1995

3040-01-418-7591
Linear Actuating Cylinder Assembly

014187591
37434: RNCC: 3 | RNVC: 2
37434: RNCC: 5 | RNVC: 2
37434: RNCC: 5 | RNVC: 2

5 Sep 1995

3040-01-420-7163
Brake Band And Lining

014207163
278-1039-801: RNCC: 3 | RNVC: 2
278 0163-801: RNCC: 5 | RNVC: 9
178 0370-801 IT 002: RNCC: 5 | RNVC: 9
278 1039-801: RNCC: 5 | RNVC: 9
178 0370-801 IT 002: RNCC: C | RNVC: 1
278 1039-801: RNCC: C | RNVC: 1

24 Oct 1995

3040-01-422-1306
Seal Inserter And Remover

014221306
J-38739-3: RNCC: 3 | RNVC: 2

22 Nov 1995

3040-01-422-8343
Shouldered Shaft

014228343
7-0104-01: RNCC: 3 | RNVC: 2
2IN VSHSM CA16221 PIECE 7: RNCC: 5 | RNVC: 2

9 Dec 1995

3040-01-424-2159
Straight Shaft

014242159
81-004-0071: RNCC: 3 | RNVC: 2
CE100E-C1-B2-26 PC-8: RNCC: 5 | RNVC: 2

24 Jan 1996

3040-01-432-4485
Linear Actuating Cylinder Assembly

014324485
12833: RNCC: 3 | RNVC: 2
3070AS515-1: RNCC: 7 | RNVC: 2

6 Jun 1996

3040-01-432-4459
Piston Ring

014324459
53775-011550: RNCC: 3 | RNVC: 2

6 Jun 1996

3040-01-432-6560
Remote Control Lever

014326560
9444500070505: RNCC: 3 | RNVC: 2
9444500070505: RNCC: 5 | RNVC: 9

11 Jun 1996

3040-01-432-8165
Shouldered Shaft

014328165
9444500160353: RNCC: 3 | RNVC: 1
9444-43-0000-16: RNCC: 5 | RNVC: 2
9444-50-0160: RNCC: 5 | RNVC: 2
9444-53-0000 PIECE 16: RNCC: 5 | RNVC: 2
9444-43-0000-16: RNCC: 5 | RNVC: 9
9444-50-0160: RNCC: 5 | RNVC: 9
9444-53-0000 PIECE 16: RNCC: 5 | RNVC: 9
9444500160353: RNCC: 5 | RNVC: 9

13 Jun 1996

3040-01-433-6212
Rigid Connecting Link

014336212
4660911-012: RNCC: 3 | RNVC: 2
4660911-012: RNCC: 3 | RNVC: 9
4660911-012: RNCC: 5 | RNVC: 2

5 Jul 1996

3040-01-433-8325
Straight Shaft

014338325
167-6404604 FIND 74: RNCC: 3 | RNVC: 2
167-6404604-74: RNCC: 5 | RNVC: 2
DF1502-255-74: RNCC: 5 | RNVC: 9
6404604: RNCC: D | RNVC: 9

11 Jul 1996

3040-01-434-7774
Friction Lining

014347774
TS1500-18: RNCC: 3 | RNVC: 2
TS1500: RNCC: D | RNVC: 9

7 Aug 1996

3040-01-424-9037
Shouldered Shaft

014249037
006-5035004-201: RNCC: 3 | RNVC: 2
006-5035004-201: RNCC: 5 | RNVC: 2
999-5113-B-01 REV 2 IT6: RNCC: 5 | RNVC: 2

7 Feb 1996

3040-01-426-6945
Nonvehicular Propeller Shaft

014266945
006-5045003-201: RNCC: 3 | RNVC: 2

15 Mar 1996

3040-01-428-5742
Shouldered Shaft

014285742
029565-1: RNCC: 3 | RNVC: 2
029565-1: RNCC: 5 | RNVC: 9

28 Mar 1996

3040-01-429-8403
Shouldered Shaft

014298403
12412879: RNCC: 3 | RNVC: 2
12412879: RNCC: 5 | RNVC: 2
12412879: RNCC: 5 | RNVC: 2
12412879: RNCC: 5 | RNVC: 2
12412879: RNCC: 5 | RNVC: 2

19 Apr 1996

3040-01-430-2234
Linear Actuating Cylinder Assembly

014302234
9752100990: RNCC: 3 | RNVC: 2
9752100990: RNCC: 3 | RNVC: 9

25 Apr 1996

3040-01-435-8090
Remote Control Lever

014358090
9938M48G07: RNCC: 3 | RNVC: 2
9938M48G07: RNCC: 5 | RNVC: 2

3 Sep 1996

3040-01-436-0721
Transmission Fluid Cooler

014360721
YMD-5500: RNCC: 3 | RNVC: 2
AMD-1139: RNCC: 5 | RNVC: 1
AMD-1139 ITEM 19: RNCC: 5 | RNVC: 2
1E2930: RNCC: 5 | RNVC: 9
1E2930: RNCC: 5 | RNVC: 9

11 Sep 1996

3040-01-436-3864
Spur Gearshaft

014363864
528292: RNCC: 3 | RNVC: 2
528292: RNCC: 3 | RNVC: 2
SH-10254 PC12: RNCC: 5 | RNVC: 2
SH10254: RNCC: D | RNVC: 9

18 Sep 1996

3040-01-435-1445
Shouldered Shaft

014351445
211068683: RNCC: 3 | RNVC: 2
801-6405354 FIND 14: RNCC: 5 | RNVC: 2
DF330725 FN 14: RNCC: 5 | RNVC: 9
6405354: RNCC: D | RNVC: 9

15 Aug 1996

3040-01-437-0441
Multiple Gears Gearshaft

014370441
31216-03: RNCC: 3 | RNVC: 2

3 Oct 1996

3040-01-439-0610
Breather

014390610
NBF-2015: RNCC: 3 | RNVC: 2
2D3-05192 ITEM NO. 16: RNCC: 5 | RNVC: 2
2D3-05193 ITEM 6: RNCC: 5 | RNVC: 2

26 Nov 1996

3040-01-440-2765
Rigid Connecting Link

014402765
77-020061-00B 10 3/16IN: RNCC: 3 | RNVC: 2
50-001104-21D CHG B FIND 6 IT 30: RNCC: 5 | RNVC: 1
50-001104-21D: RNCC: D | RNVC: 9
77-020061-00B: RNCC: D | RNVC: 9

9 Jan 1997

3040-01-441-4378
Shouldered Shaft

014414378
32839: RNCC: 3 | RNVC: 2
83913-1 IT32: RNCC: 5 | RNVC: 9
84032-1 IT32: RNCC: 5 | RNVC: 9

12 Feb 1997

3040-01-442-5696
Shouldered Shaft

014425696
12416006: RNCC: 3 | RNVC: 2
12416006: RNCC: 5 | RNVC: 2
12416006: RNCC: 5 | RNVC: 2

18 Mar 1997

3040-01-442-8158
Follower Shaft Asse

014428158
1189-25: RNCC: 3 | RNVC: 2
1189-1 ITEM 4: RNCC: 5 | RNVC: 2
1189-1: RNCC: D | RNVC: 9

25 Mar 1997

3040-01-443-1062
Bevel Gearshaft

014431062
39616: RNCC: 3 | RNVC: 2
15098D-39640-TD-1.2: RNCC: 5 | RNVC: 1
15098-39640-2: RNCC: 5 | RNVC: 2
15098-39640: RNCC: D | RNVC: 9

1 Apr 1997

3040-01-443-7138
Rigid Connecting Link

014437138
ML-34.45-1: RNCC: 3 | RNVC: 2
SPR ML 34.45 1: RNCC: 5 | RNVC: 2
SPR/GS3089 34 45: RNCC: 5 | RNVC: 9
GS3089 34 45: RNCC: 5 | RNVC: 9

16 Apr 1997

3040-01-443-6603
Linear Actuating Cylinder Piston Rod

014436603
123-4403545 PART 48: RNCC: 3 | RNVC: 2
123-5941945 PART 48: RNCC: 5 | RNVC: 9
1502-216 PART 48: RNCC: 5 | RNVC: 9
1502-215 PART 48: RNCC: 5 | RNVC: 9
5941945: RNCC: D | RNVC: 9

15 Apr 1997

3040-01-445-6552
Linear Actuating Cylinder Assembly

014456552
2.50BC-2MAUS18AX8.00: RNCC: 3 | RNVC: 2
12416129: RNCC: 3 | RNVC: 2
2.50 BC-MAUS1BAX8.00: RNCC: 3 | RNVC: 2
12416129: RNCC: 5 | RNVC: 2
12416129: RNCC: 7 | RNVC: 2

9 Jun 1997

3040-01-446-2413
Straight Shaft

014462413
1631647: RNCC: 3 | RNVC: 2
CMG/237410: RNCC: 5 | RNVC: 2
237410: RNCC: 5 | RNVC: 9

26 Jun 1997

3040-01-445-7374
Pawl

014457374
123-4403556 PIECE 36: RNCC: 3 | RNVC: 2
123-4403556 PIECE 36: RNCC: 5 | RNVC: 9
1502-100 PIECE 36: RNCC: 5 | RNVC: 9
4403556: RNCC: D | RNVC: 9

11 Jun 1997

3040-01-447-7995
Rigid Connecting Link

014477995
5744105: RNCC: 3 | RNVC: 2
8661691: RNCC: 5 | RNVC: 9
24200173: RNCC: 5 | RNVC: 9
24200173: RNCC: 5 | RNVC: 9
24200173: RNCC: 5 | RNVC: 9
5342PL0740379: RNCC: 6 | RNVC: 9
A05744105: RNCC: D | RNVC: 9

14 Aug 1997

3040-01-446-9988
Shouldered Shaft

014469988
21140-1002-1: RNCC: 3 | RNVC: 2
21140-8: RNCC: 5 | RNVC: 9
21140: RNCC: D | RNVC: 9

23 Jul 1997

3040-01-448-8570
Straight Shaft

014488570
167-6404610 FIND 20: RNCC: 3 | RNVC: 2
DF1502-238 FIND 20: RNCC: 5 | RNVC: 9
6404610: RNCC: D | RNVC: 9

11 Sep 1997

3040-01-453-2925
Bell Crank

014532925
3036AS570: RNCC: 3 | RNVC: 2
3036AS570: RNCC: 5 | RNVC: 2
3036AS570: RNCC: 5 | RNVC: 2
3036AS570: RNCC: 5 | RNVC: 2
3036AS570: RNCC: 5 | RNVC: 2
10107018: RNCC: 6 | RNVC: 9
D014040-501: RNCC: E | RNVC: 8
D014040-501: RNCC: E | RNVC: 8

25 Feb 1998

3040-01-453-5572
Straight Shaft

014535572
C-42SV1023: RNCC: 3 | RNVC: 2
2570-PL1-10000 FIND NO. A024: RNCC: 5 | RNVC: 2
2570-PL1-1000: RNCC: D | RNVC: 9

4 Mar 1998

3040-01-453-9281
Worm Shaft

014539281
845-7016098-0B-102: RNCC: 3 | RNVC: 1

13 Mar 1998

3040-01-454-2312
Push-Pull Control Assembly

014542312
C1615Z-45 FT: RNCC: 3 | RNVC: 2
C1615Z: RNCC: D | RNVC: 9

24 Mar 1998

3040-01-454-3740
Rigid Connecting Link

014543740
746617-A00: RNCC: 3 | RNVC: 2
746605-K01PC13: RNCC: 5 | RNVC: 2

27 Mar 1998

3040-01-454-6543
Body Hub

014546543
7579856-001: RNCC: 3 | RNVC: 2
7579856-001: RNCC: 3 | RNVC: 2
7579856-001: RNCC: 5 | RNVC: 2

8 Apr 1998

3040-01-454-6892
Crank Arm Weldment

014546892
7005636-1: RNCC: 3 | RNVC: 2

9 Apr 1998

3040-01-455-6950
Rigid Connecting Link

014556950
L48033G03: RNCC: 3 | RNVC: 2
L48033G0332: RNCC: 3 | RNVC: 9
L48033: RNCC: D | RNVC: 9

12 May 1998

3040-01-456-3646
Pendant

014563646
6621953S: RNCC: 3 | RNVC: 2
6621953: RNCC: 5 | RNVC: 9
6621953: RNCC: 5 | RNVC: 9

10 Jun 1998

3040-01-370-2842
Straight Shaft

013702842
10029494: RNCC: 3 | RNVC: 2

17 Jan 1993

3040-01-370-2966
Rigid Connecting Link

013702966
1534AS131: RNCC: 3 | RNVC: 2
1534AS131: RNCC: 5 | RNVC: 2
1534AS131: RNCC: 5 | RNVC: 2
1534AS131: RNCC: 5 | RNVC: 2
1534AS131: RNCC: 5 | RNVC: 2
1534AS131: RNCC: 5 | RNVC: 2
1534AS131: RNCC: 5 | RNVC: 9
10372058: RNCC: 6 | RNVC: 9

17 Jan 1993

3040-01-371-2665
Shouldered Shaft Assembly

013712665
9380583: RNCC: 3 | RNVC: 2

9 Feb 1993

3040-01-372-5537
Linear Actuating Cylinder Assembly

013725537
138517: RNCC: 3 | RNVC: 2
9-242-010177: RNCC: 5 | RNVC: 2
9-242-010177: RNCC: 5 | RNVC: 2
9-242-010177: RNCC: 5 | RNVC: 9

12 Mar 1993

3040-01-372-5085
Rigid Connecting Link

013725085
12329218-11: RNCC: 3 | RNVC: 2
12329218: RNCC: D | RNVC: 9

11 Mar 1993

3040-01-374-2081
Brake Drum

013742081
11535: RNCC: 3 | RNVC: 2
11535: RNCC: 5 | RNVC: 2
11535: RNCC: 5 | RNVC: 2
2GL20: RNCC: 5 | RNVC: 2
11535: RNCC: 5 | RNVC: 9

17 Apr 1993

3040-01-375-1571
Multiple Gears Gearshaft

013751571
12719: RNCC: 3 | RNVC: 2
12719: RNCC: 5 | RNVC: 2
12719: RNCC: 5 | RNVC: 2

6 May 1993

3040-01-376-1399
Mechanical Drive Housing

013761399
42315-125: RNCC: 3 | RNVC: 2
42315-125: RNCC: 5 | RNVC: 9
42315-125: RNCC: 5 | RNVC: 9
42315-125: RNCC: 5 | RNVC: 9

27 May 1993

3040-01-377-4113
Shouldered Shaft

013774113
N03693BAF5P: RNCC: 3 | RNVC: 2
6405 ITEM 12: RNCC: 5 | RNVC: 2
6405-12: RNCC: 5 | RNVC: 2
03693BAF5P: RNCC: 5 | RNVC: 9

15 Jul 1993

3040-01-378-1486
Shaft Retaining Plate

013781486
2751691: RNCC: 3 | RNVC: 2
2751691: RNCC: 5 | RNVC: 9

12 Aug 1993

3040-01-378-5203
Nonaircraft Mechanical Actuator

013785203
53460A-2: RNCC: 3 | RNVC: 2

21 Aug 1993

3040-01-381-8852
Linear Actuating Cylinder Cap

013818852
801-6641189FNB8: RNCC: 3 | RNVC: 2
801-6641189FNA8: RNCC: 5 | RNVC: 2

23 Oct 1993

3040-01-383-5050
Shaft Retaining Plate

013835050
2215-247: RNCC: 3 | RNVC: 2
2215-176: RNCC: 5 | RNVC: 9
88043-183: RNCC: 7 | RNVC: 2

25 Nov 1993

3040-01-383-5333
Control Cam

013835333
1168845-3: RNCC: 3 | RNVC: 2
1168845-3: RNCC: 3 | RNVC: 9
1168845-3: RNCC: 5 | RNVC: 9

25 Nov 1993

3040-01-384-0719
Rigid Connecting Link

013840719
0021-4793-710: RNCC: 3 | RNVC: 2
0021-4793-710: RNCC: 5 | RNVC: 9

8 Dec 1993

3040-01-384-0888
Remote Control Lever

013840888
6534C592-1: RNCC: 3 | RNVC: 2
6534C592-1: RNCC: 5 | RNVC: 2
6534C592-1: RNCC: 5 | RNVC: 2

8 Dec 1993

3040-01-384-0918
Shouldered Shaft

013840918
12389324: RNCC: 3 | RNVC: 2

8 Dec 1993

3040-01-384-1239
Actuating Cylinder Expander Ring

013841239
A02H4854-1: RNCC: 3 | RNVC: 2
A02H4854: RNCC: D | RNVC: 9

8 Dec 1993

3040-01-386-0204
Straight Shaft

013860204
6650439-1: RNCC: 3 | RNVC: 2
717124422405: RNCC: 5 | RNVC: 9

25 Jan 1994

3040-01-386-5676
Remote Control Lever

013865676
8-52-209: RNCC: 3 | RNVC: 9

8 Feb 1994

3040-01-386-6609
Remote Control Lever

013866609
5429130: RNCC: 3 | RNVC: 2

10 Feb 1994

3040-01-386-6659
Shouldered Shaft

013866659
9338170-2: RNCC: 3 | RNVC: 2
9338170: RNCC: D | RNVC: 9

10 Feb 1994

3040-01-387-4726
Straight Shaft

013874726
12417459: RNCC: 3 | RNVC: 2
12417459: RNCC: 5 | RNVC: 2
12417459: RNCC: 5 | RNVC: 2
12417459: RNCC: 5 | RNVC: 2
12417459: RNCC: 5 | RNVC: 2
12417459: RNCC: 5 | RNVC: 9

5 Mar 1994

3040-01-387-9257
Spur Gearshaft

013879257
6429518-1: RNCC: 3 | RNVC: 2
6429518-1: RNCC: 5 | RNVC: 9
6429518: RNCC: C | RNVC: 1

16 Mar 1994

3040-01-387-8411
Flexible Shaft Assembly Core

013878411
57353-95: RNCC: 3 | RNVC: 2

14 Mar 1994

3040-01-387-7250
Flexible Shaft Assembly Core

013877250
57353-59: RNCC: 3 | RNVC: 2

10 Mar 1994

3040-01-391-0654
Mechanical Drive Housing

013910654
223F321: RNCC: 3 | RNVC: 2

2 Jun 1994

3040-01-391-3940
Nonrotating Shaft Eye Bracket

013913940
1819989: RNCC: 3 | RNVC: 2
1819989: RNCC: 5 | RNVC: 2
1819989: RNCC: 5 | RNVC: 9

9 Jun 1994

3040-01-393-7533
Housing Adapter

013937533
8D00096-1: RNCC: 3 | RNVC: 2
8D00096-1: RNCC: 5 | RNVC: 9
8D00096-1: RNCC: 5 | RNVC: 9
8D00096: RNCC: D | RNVC: 9

26 Jul 1994

3040-01-394-4821
Shouldered Shaft

013944821
M27780003: RNCC: 3 | RNVC: 2
M27780003: RNCC: 3 | RNVC: 9
M27780003: RNCC: 5 | RNVC: 9

9 Aug 1994

3040-01-394-9685
Control Cam

013949685
406-071-110-105: RNCC: 3 | RNVC: 2

18 Aug 1994

3040-01-397-7230
Rigid Connecting Link

013977230
75A353063-2007: RNCC: 3 | RNVC: 2

18 Oct 1994

3040-01-398-6490
Linear Actuating Cylinder Assembly

013986490
2022AS107-1: RNCC: 3 | RNVC: 2
ES2244: RNCC: 3 | RNVC: 9
ES2244: RNCC: 5 | RNVC: 9
2022AS107-1: RNCC: 7 | RNVC: 2

7 Nov 1994

3040-01-399-2415
Straight Shaft Assembly

013992415
4P7790: RNCC: 3 | RNVC: 2
9Y8532: RNCC: 5 | RNVC: 9

19 Nov 1994

3040-01-399-0912
Shouldered Shaft

013990912
50004-2: RNCC: 3 | RNVC: 2
40074 ITEM NO 7: RNCC: 5 | RNVC: 2
50004 DASH 2: RNCC: 5 | RNVC: 2
50004: RNCC: D | RNVC: 9
40074: RNCC: D | RNVC: 9

16 Nov 1994

3040-01-406-0371
Rigid Connecting Link

014060371
17097: RNCC: 3 | RNVC: 2
SKB-465 ITEM X75: RNCC: 5 | RNVC: 2
X75: RNCC: 5 | RNVC: 2
SKB-465: RNCC: D | RNVC: 9

19 Dec 1994

3040-01-407-3997
Cylinder Flexicut

014073997
5168-MF-20: RNCC: 3 | RNVC: 2
CA252 ITEM 8: RNCC: 5 | RNVC: 9
CA252: RNCC: D | RNVC: 9

27 Jan 1995

3040-01-408-1585
Push-Pull Control Assembly

014081585
18505902: RNCC: 3 | RNVC: 2
5749932-015: RNCC: 5 | RNVC: 2
7-44347-15: RNCC: 5 | RNVC: 9
55-8311-2116: RNCC: 5 | RNVC: 9

10 Feb 1995

3040-01-409-0057
Shouldered Shaft

014090057
006-NGD-003-300: RNCC: 3 | RNVC: 2
D-NGC-0-99-025 REVC PC71: RNCC: 5 | RNVC: 2
F-NGD-0-99-005 REVB PC71: RNCC: 5 | RNVC: 2

3 Mar 1995

3040-01-409-2502
Rigid Connecting Link

014092502
12447176: RNCC: 3 | RNVC: 2
12447176: RNCC: 5 | RNVC: 2
52828-1: RNCC: 5 | RNVC: 2
6003175: RNCC: 5 | RNVC: 9
5342PL0737634: RNCC: 6 | RNVC: 9

8 Mar 1995

3040-01-412-0302
Remote Control Lever

014120302
106171: RNCC: 3 | RNVC: 2
106171: RNCC: 5 | RNVC: 2
106171: RNCC: C | RNVC: 1

8 Apr 1995

3040-01-412-9566
Housin Fitted Cover

014129566
11682: RNCC: 3 | RNVC: 2
280104-5: RNCC: 5 | RNVC: 2
280104-5: RNCC: 5 | RNVC: 9
280104-5: RNCC: 5 | RNVC: 9

3 May 1995

3040-01-412-7610
Spline Adapter

014127610
A15PS257-7: RNCC: 1 | RNVC: 2
118041-7: RNCC: 3 | RNVC: 2
118041-7: RNCC: 5 | RNVC: 9
118041: RNCC: D | RNVC: 9
A15PS257: RNCC: D | RNVC: 9

27 Apr 1995

3040-01-412-7652
Body Hub

014127652
NW33904: RNCC: 3 | RNVC: 2

27 Apr 1995

3040-01-413-3767
Straight Shaft

014133767
184080-6: RNCC: 3 | RNVC: 2
184080-6: RNCC: 5 | RNVC: 2

12 May 1995

3040-01-413-1368
Rigid Connecting Link

014131368
8741904: RNCC: 3 | RNVC: 2
8741900: RNCC: D | RNVC: 9

5 May 1995

3040-01-411-0672
Rigid Connecting Link

014110672
12365763: RNCC: 3 | RNVC: 2
12365763: RNCC: 5 | RNVC: 2
12365763: RNCC: 5 | RNVC: 2

16 Mar 1995

3040-01-414-3469
Rotary Electro-Mechanical Actuator

014143469
9230A6801: RNCC: 3 | RNVC: 2
880198-1: RNCC: 5 | RNVC: 2

5 Jun 1995

3040-01-414-4111
Shouldered Shaft

014144111
21330-1007-1: RNCC: 3 | RNVC: 2
21329-9: RNCC: 5 | RNVC: 9
21329: RNCC: D | RNVC: 9

7 Jun 1995

3040-01-414-8567
Shouldered Shaft

014148567
24524: RNCC: 3 | RNVC: 2
24524: RNCC: 5 | RNVC: 1

15 Jun 1995

3040-01-415-3182
Straight Shaft

014153182
21142-1002-1: RNCC: 3 | RNVC: 2
21142 FIND 10: RNCC: 5 | RNVC: 9
21142-1002: RNCC: 5 | RNVC: 9
21142: RNCC: D | RNVC: 9

23 Jun 1995

3040-01-416-5700
Rigid Connecting Link

014165700
IM-0426-400: RNCC: 3 | RNVC: 2
IM-0426-400: RNCC: C | RNVC: 1

21 Jul 1995

3040-01-416-6902
Piston Ring

014166902
6004154: RNCC: 3 | RNVC: 2
6004154: RNCC: 3 | RNVC: 9
6004154: RNCC: 5 | RNVC: 2

24 Jul 1995

3040-01-418-3139
Rigid Connecting Link

014183139
901-301-014-111: RNCC: 3 | RNVC: 2
C-01037-111: RNCC: 5 | RNVC: 9

24 Aug 1995

3040-01-418-6588
Control Cam

014186588
16L322-10: RNCC: 3 | RNVC: 2
16L322-10: RNCC: 8 | RNVC: 2

31 Aug 1995

3040-01-420-1119
Shouldered Shaft

014201119
211039109: RNCC: 3 | RNVC: 2
512-6405295-9: RNCC: 5 | RNVC: 2
512-6404873-8: RNCC: 5 | RNVC: 2
DF6501-70 FN 9: RNCC: 5 | RNVC: 9
6404873: RNCC: D | RNVC: 9
6405295: RNCC: D | RNVC: 9

6 Oct 1995

3040-01-420-1221
Shouldered Shaft

014201221
D25-016-1010: RNCC: 3 | RNVC: 2
PL-H25C0700001 REF NO.23: RNCC: 5 | RNVC: 2
D35C2500004 ITEM 49: RNCC: C | RNVC: 1
D35C2500003 ITEM 49: RNCC: C | RNVC: 1

6 Oct 1995

3040-01-419-9921
Shaft Collar

014199921
478 1113-001: RNCC: 3 | RNVC: 2
478 1113-001: RNCC: 3 | RNVC: 9
178 0373-801 IT 014: RNCC: 5 | RNVC: 2
178 0373-801 IT 014: RNCC: 5 | RNVC: 9
178 0373-801: RNCC: D | RNVC: 9

5 Oct 1995

3040-01-420-1159
Shouldered Shaft

014201159
211039111: RNCC: 3 | RNVC: 2
512-6404873-33: RNCC: 5 | RNVC: 2
512-6408431-6: RNCC: 5 | RNVC: 2
DF6501-69-FN6: RNCC: 5 | RNVC: 9
DF6501-71-FN33: RNCC: 5 | RNVC: 9
6404873: RNCC: D | RNVC: 9
6408431: RNCC: D | RNVC: 9

6 Oct 1995

3040-01-420-9987
Linear Actuating Cylinder Assembly

014209987
F0-312.5-2F: RNCC: 3 | RNVC: 9
0707260: RNCC: 5 | RNVC: 2

30 Oct 1995

3040-01-421-4676
Shouldered Shaft

014214676
50271002-12: RNCC: 3 | RNVC: 9
50271002-12: RNCC: 5 | RNVC: 2
50271000 ITEM 14: RNCC: 5 | RNVC: 2
PL50271000 ITEM 14: RNCC: 5 | RNVC: 2
50271000 ITEM 14: RNCC: 5 | RNVC: 9
PL50271000 ITEM 14: RNCC: 5 | RNVC: 9
50271000 ITEM 14: RNCC: 5 | RNVC: 9
50271002-12: RNCC: 5 | RNVC: 9
PL50271000 ITEM 14: RNCC: 5 | RNVC: 9

8 Nov 1995

3040-01-421-1593
Ball Joint

014211593
A3209877: RNCC: 3 | RNVC: 2
A3209877: RNCC: 5 | RNVC: 9

2 Nov 1995

3040-01-423-1782
Shaft Collar

014231782
12440534: RNCC: 3 | RNVC: 2
3HD595: RNCC: 5 | RNVC: 2
3HD595: RNCC: 5 | RNVC: 9
12440534: RNCC: 5 | RNVC: 9

18 Dec 1995

3040-01-424-2167
Shouldered Shaft

014242167
28825: RNCC: 3 | RNVC: 2

24 Jan 1996

3040-01-430-9577
Push-Pull Control Assembly

014309577
5SE01208-2: RNCC: 1 | RNVC: 2
C81646-2: RNCC: 3 | RNVC: 2

6 May 1996

3040-01-425-2232
Breather

014252232
569022-27: RNCC: 3 | RNVC: 2
752-6406838-65: RNCC: 3 | RNVC: 2
752-6406838-65: RNCC: 5 | RNVC: 2
211049276: RNCC: 5 | RNVC: 2
752-7068477-110: RNCC: 5 | RNVC: 2
H832-1662-110: RNCC: 5 | RNVC: 2
752-7068477: RNCC: D | RNVC: 9

15 Feb 1996

3040-01-432-0221
Linear Actuating Cylinder Assembly

014320221
3070AS533-1: RNCC: 3 | RNVC: 2
61650032064: RNCC: 5 | RNVC: 2
3070AS533: RNCC: 7 | RNVC: 1

23 May 1996

3040-01-432-4693
Straight Shaft

014324693
705529A00: RNCC: 3 | RNVC: 2
3261912 ITEM 122: RNCC: 5 | RNVC: 2
705529-A: RNCC: 5 | RNVC: 9
701363: RNCC: D | RNVC: 9
3261912: RNCC: D | RNVC: 9

6 Jun 1996

3040-01-432-5657
Linear Actuating Cylinder Piston

014325657
203874: RNCC: 3 | RNVC: 2

10 Jun 1996

3040-01-432-2499
Straight Shaft

014322499
105-9X-F1294-SHAFT: RNCC: 3 | RNVC: 2
105-9X-F1294-SHAFT: RNCC: 5 | RNVC: 2

30 May 1996

3040-01-432-0332
Shouldered Shaft

014320332
23-06327: RNCC: 3 | RNVC: 2
589-6953367: RNCC: 5 | RNVC: 2
23-06327: RNCC: 5 | RNVC: 2
589-6953367: RNCC: 5 | RNVC: 2
23-06327: RNCC: 5 | RNVC: 9
589-6953367: RNCC: 5 | RNVC: 9
589-6953367: RNCC: 5 | RNVC: 9

23 May 1996

3040-01-432-5729
Straight Shaft

014325729
67725-088024: RNCC: 3 | RNVC: 2
63345-059001: RNCC: 5 | RNVC: 2

10 Jun 1996

3040-01-432-5746
Linear Actuating Cylinder Assembly

014325746
61500-184007: RNCC: 3 | RNVC: 2
61500-184006: RNCC: 5 | RNVC: 2
3070AS523-1: RNCC: 7 | RNVC: 2

10 Jun 1996

3040-01-432-9023
Housing Adapter

014329023
E8CR132-0010: RNCC: 3 | RNVC: 2
E8CR132-0010: RNCC: 5 | RNVC: 9

18 Jun 1996

3040-01-432-5953
Shouldered Shaft

014325953
52041-1002-1: RNCC: 3 | RNVC: 2
52103-29: RNCC: 5 | RNVC: 9
52106-29: RNCC: 5 | RNVC: 9
52108 FIND 67: RNCC: 5 | RNVC: 9
52108-67: RNCC: 5 | RNVC: 9
52122 FIND 29: RNCC: C | RNVC: 1
52108: RNCC: D | RNVC: 9

10 Jun 1996

3040-01-434-8002
Mechanical Drive Housing

014348002
5-57243: RNCC: 3 | RNVC: 2
5-57243: RNCC: 3 | RNVC: 2

7 Aug 1996

3040-01-430-4140
Shouldered Shaft

014304140
83845: RNCC: 3 | RNVC: 2
83792 IT45: RNCC: 5 | RNVC: 9
83792: RNCC: D | RNVC: 9

29 Apr 1996

3040-01-431-9076
Counterbalance Weight

014319076
EX4269: RNCC: 3 | RNVC: 2
EX4269: RNCC: 7 | RNVC: 2

21 May 1996

3040-01-436-6212
Shouldered Shaft

014366212
029204-1: RNCC: 3 | RNVC: 2
029204-1: RNCC: 5 | RNVC: 9
029204-1: RNCC: C | RNVC: 1
029204: RNCC: D | RNVC: 9

24 Sep 1996

3040-01-436-9901
Rotating Shaft Eye Bracket

014369901
1764AS221-1: RNCC: 3 | RNVC: 2

3 Oct 1996

3040-01-436-9909
Hydraulic Accumulator

014369909
1741AS362-1: RNCC: 1 | RNVC: 2
BA10B3T01P2: RNCC: 3 | RNVC: 2
BA10B3T01A1: RNCC: 3 | RNVC: 9
850670: RNCC: 5 | RNVC: 9
1741AS362-1: RNCC: 5 | RNVC: 9

3 Oct 1996

3040-01-437-5545
Shouldered Shaft

014375545
8452127: RNCC: 3 | RNVC: 2
8452127: RNCC: 3 | RNVC: 9

17 Oct 1996

3040-01-437-2405
Linear Actuating Cylinder Assembly

014372405
TG10GWXX5FACA947: RNCC: 3 | RNVC: 2
7A8-08503: RNCC: 5 | RNVC: 2
CA947: RNCC: 5 | RNVC: 9

8 Oct 1996

3040-01-437-5571
Mechanically Actuated Spindle

014375571
17P2G5050-520: RNCC: 3 | RNVC: 2

17 Oct 1996

3040-01-437-5803
Linear Actuating Cylinder Assembly

014375803
TG10EWXX3FACA949: RNCC: 3 | RNVC: 2
7D3-04987 IT NO 3: RNCC: 5 | RNVC: 2
7D3-05075 IT NO 3: RNCC: 5 | RNVC: 2
7D3-05185 IT NO 3: RNCC: 5 | RNVC: 2
7D3-04940 IT NO 3: RNCC: 5 | RNVC: 2
7A8-08505: RNCC: 5 | RNVC: 2
CA949: RNCC: 5 | RNVC: 9

18 Oct 1996

3040-01-438-3443
Straight Shaft

014383443
1220C1259: RNCC: 3 | RNVC: 9
1220C1259: RNCC: C | RNVC: 1

5 Nov 1996

3040-01-438-8054
Linear Actuating Cylinder Assembly

014388054
6623299: RNCC: 3 | RNVC: 2
6615033: RNCC: 5 | RNVC: 9
6623299: RNCC: 5 | RNVC: 9

20 Nov 1996

3040-01-440-2387
Linear Actuating Cylinder Cap

014402387
501848: RNCC: 3 | RNVC: 2
SH-9726 DET 87: RNCC: 5 | RNVC: 2
501848: RNCC: 5 | RNVC: 9
SH-9726: RNCC: D | RNVC: 9

8 Jan 1997

3040-01-440-4695
Nonaircraft Mechanical Actuator

014404695
22002-17: RNCC: 3 | RNVC: 2
22002-17: RNCC: 5 | RNVC: 2
DWG. S6435-SM-MMM-010 FIG. B6: RNCC: 5 | RNVC: 2
B-800-22002-17: RNCC: 5 | RNVC: 9
22002: RNCC: D | RNVC: 9

14 Jan 1997

3040-01-441-6631
Shouldered Shaft

014416631
22210: RNCC: 3 | RNVC: 2

20 Feb 1997

3040-01-442-3914
Shouldered Shaft

014423914
A3297N1184: RNCC: 3 | RNVC: 2
A3297N1184: RNCC: 3 | RNVC: 9
A3297N1184: RNCC: 5 | RNVC: 2
A3297N1184: RNCC: 5 | RNVC: 2

13 Mar 1997

3040-01-442-3643
Rotating Shaft Eye Bracket

014423643
12419051: RNCC: 3 | RNVC: 2
12419051: RNCC: 5 | RNVC: 2
12419051: RNCC: 5 | RNVC: 2

13 Mar 1997

3040-01-443-0732
Linear Actuating Cylinder

014430732
1833440: RNCC: 3 | RNVC: 2
1833440: RNCC: 5 | RNVC: 9

1 Apr 1997

3040-01-443-8488
Remote Control Lever

014438488
1476AS232-1: RNCC: 3 | RNVC: 2
1476AS232-1: RNCC: 5 | RNVC: 2
1476AS232-1: RNCC: C | RNVC: 1

21 Apr 1997

3040-01-444-1988
Control Cam

014441988
901-011-316-102: RNCC: 3 | RNVC: 2

1 May 1997

3040-01-444-3203
Shouldered Shaft

014443203
901-047-580-101: RNCC: 3 | RNVC: 2

5 May 1997

3040-01-444-1997
Shouldered Shaft

014441997
901-011-464-104: RNCC: 3 | RNVC: 2

1 May 1997

3040-01-444-1990
Control Cam

014441990
901-011-316-101: RNCC: 3 | RNVC: 2

1 May 1997

3040-01-448-6897
Rigid Connecting Link

014486897
69-6365-5: RNCC: 3 | RNVC: 2
69-6365-5: RNCC: 5 | RNVC: 2

8 Sep 1997

3040-01-447-2276
Headless Straight Pin

014472276
12012067: RNCC: 3 | RNVC: 2
12012067: RNCC: 5 | RNVC: 2
12012067: RNCC: 5 | RNVC: 2
717124422603: RNCC: 5 | RNVC: 9
456720107107: RNCC: 6 | RNVC: 9

30 Jul 1997

3040-01-443-0783
Shouldered Shaft

014430783
B13-4257: RNCC: 3 | RNVC: 2
601399-2-A: RNCC: 5 | RNVC: 9

1 Apr 1997

3040-01-449-4348
Straight Shaft

014494348
512-6404653-45: RNCC: 3 | RNVC: 2
512-6404652-48: RNCC: 5 | RNVC: 2
DF6503-173-48: RNCC: 5 | RNVC: 9
DF6503-175-45: RNCC: 5 | RNVC: 9
6404653: RNCC: D | RNVC: 9
6404652: RNCC: D | RNVC: 9

1 Oct 1997

3040-01-443-3004
Rigid Connecting Link

014433004
68B618000-295: RNCC: 3 | RNVC: 2
SR11282A-295: RNCC: 5 | RNVC: 2
SR11282A-295: RNCC: 5 | RNVC: 2
SR11282A-295: RNCC: 5 | RNVC: 9
68B618000: RNCC: D | RNVC: 9

7 Apr 1997

3040-01-450-0186
Counterbalance Weight

014500186
212-010-710-113: RNCC: 3 | RNVC: 2
212-010-710: RNCC: D | RNVC: 9

23 Oct 1997

3040-01-452-3332
Spur Gearshaft

014523332
H306-220: RNCC: 3 | RNVC: 2
N5691 PC 77: RNCC: 5 | RNVC: 2
N5691: RNCC: D | RNVC: 9

23 Jan 1998

3040-01-453-2492
Straight Shaft

014532492
83422: RNCC: 3 | RNVC: 2
84033-1 IT34: RNCC: 5 | RNVC: 9
83791 REV G IT3: RNCC: C | RNVC: 1
84033 REV A IT3: RNCC: C | RNVC: 1
PL 84033-1 REV: RNCC: C | RNVC: 1

24 Feb 1998

3040-01-453-3886
Shouldered Shaft

014533886
12462247: RNCC: 3 | RNVC: 2
12462247: RNCC: 5 | RNVC: 2
12462247: RNCC: D | RNVC: 9

27 Feb 1998

3040-01-453-8781
Trans Temper. Kit

014538781
6621752: RNCC: 3 | RNVC: 2
6621752: RNCC: 5 | RNVC: 9

12 Mar 1998

3040-01-455-2543
Straight Shaft

014552543
2741394-1-1: RNCC: 3 | RNVC: 2
74-660057-217: RNCC: 5 | RNVC: 2

27 Apr 1998

3040-01-455-2622
Rigid Connecting Link

014552622
74A172200-1004: RNCC: 3 | RNVC: 2

27 Apr 1998

3040-01-424-0865
Piston Ring

014240865
R939053139: RNCC: 3 | RNVC: 2
21864101-115: RNCC: 3 | RNVC: 9
21864101-115: RNCC: 5 | RNVC: 9
1781301-802 IT 009: RNCC: 5 | RNVC: 9
2186 4101-115: RNCC: C | RNVC: 1
1781301-802: RNCC: D | RNVC: 9

19 Jan 1996

3040-01-426-2462
Push-Pull Control Assembly

014262462
301947-003-120: RNCC: 3 | RNVC: 9
301947-003-10FT: RNCC: 5 | RNVC: 2
301947-003-120: RNCC: 5 | RNVC: 2
33C-003-120: RNCC: 5 | RNVC: 2
CCX63310: RNCC: 5 | RNVC: 2
6893071 PC 220,223,224: RNCC: 5 | RNVC: 2
D044194-003-10FT: RNCC: 5 | RNVC: 2
D044194-003-120: RNCC: 5 | RNVC: 2
D044194-003-10FT: RNCC: 5 | RNVC: 9
D044194-003-120: RNCC: 5 | RNVC: 9

7 Mar 1996

3040-01-435-1118
Shouldered Shaft

014351118
3337AS966-1: RNCC: 3 | RNVC: 2
922530021: RNCC: 5 | RNVC: 9

14 Aug 1996

3040-01-435-1001
Straight Shaft

014351001
M24060125: RNCC: 3 | RNVC: 2
M24060125: RNCC: 3 | RNVC: 9

14 Aug 1996

3040-01-436-4156
Straight Shaft

014364156
1764AS500-1: RNCC: 3 | RNVC: 2

19 Sep 1996

3040-01-370-0365
Shaft Collar

013700365
J107873: RNCC: 3 | RNVC: 2
C502Z002: RNCC: 5 | RNVC: 9
3040V0746: RNCC: D | RNVC: 9

11 Jan 1993

3040-01-370-2887
Linear Actuating Cylinder Piston Rod

013702887
6-768-002528: RNCC: 3 | RNVC: 2
6-768-002528: RNCC: 5 | RNVC: 2
6-768-002528: RNCC: 5 | RNVC: 2

17 Jan 1993

3040-01-370-4924
Linear Actuating Cylinder Head

013704924
6-372-002525: RNCC: 3 | RNVC: 9
6-372-002525: RNCC: 5 | RNVC: 2
6-372-002525: RNCC: 5 | RNVC: 2
6-372-002525: RNCC: 5 | RNVC: 2

23 Jan 1993

3040-01-371-0405
Linear Actuating Cylinder Assembly

013710405
1HTMH000250070: RNCC: 3 | RNVC: 2
89156951: RNCC: 5 | RNVC: 9
CYSR 5000 HY84T2B200725100990: RNCC: 5 | RNVC: 9
8707,C048: RNCC: 5 | RNVC: 9

5 Feb 1993

3040-01-371-9880
Extension Shaft

013719880
384-1696-01: RNCC: 3 | RNVC: 2

27 Feb 1993

3040-01-372-7395
Linear Actuating Cylinder Assembly

013727395
138516: RNCC: 3 | RNVC: 2
9-242-010176: RNCC: 5 | RNVC: 2
9-242-010176: RNCC: 5 | RNVC: 2
9-242-010176: RNCC: 5 | RNVC: 9

17 Mar 1993

3040-01-373-2865
Remote Control Lever

013732865
12268354: RNCC: 3 | RNVC: 2
12268354: RNCC: 5 | RNVC: 2

31 Mar 1993

3040-01-374-7877
Shouldered Shaft

013747877
5700100-013: RNCC: 3 | RNVC: 2
5700100-013: RNCC: 5 | RNVC: 9

29 Apr 1993

3040-01-377-4238
Manual Control Lever

013774238
N03717A0K4: RNCC: 3 | RNVC: 2
6405 ITEM 53: RNCC: 5 | RNVC: 2
6405-53: RNCC: 5 | RNVC: 2
03717A0K4: RNCC: 5 | RNVC: 9
6405: RNCC: D | RNVC: 9

15 Jul 1993

3040-01-377-7041
Shouldered Shaft

013777041
801-6406768-32: RNCC: 3 | RNVC: 2
211060927: RNCC: 5 | RNVC: 2

23 Jul 1993

3040-01-378-2239
Shouldered Shaft

013782239
6532C407-2: RNCC: 3 | RNVC: 2
6532C407-2: RNCC: 5 | RNVC: 2

12 Aug 1993

3040-01-377-2856
Straight Axle

013772856
5361663 ITEM 55: RNCC: 3 | RNVC: 2
5361663: RNCC: D | RNVC: 9

12 Jul 1993

3040-01-379-2096
Control Cam

013792096
2046-0002: RNCC: 3 | RNVC: 2

29 Aug 1993

3040-01-379-4922
Control Cam

013794922
2046-0007: RNCC: 3 | RNVC: 2
D-2046: RNCC: D | RNVC: 9

31 Aug 1993

3040-01-381-8436
Rigid Connecting Link

013818436
3062009: RNCC: 3 | RNVC: 2

22 Oct 1993

3040-01-382-6490
Linear Actuating Cylinder Assembly

013826490
6-768-002524: RNCC: 3 | RNVC: 2
6-768-002524: RNCC: 5 | RNVC: 2
6-768-002524: RNCC: 5 | RNVC: 2

5 Nov 1993

3040-01-382-6747
Shouldered Shaft

013826747
12389493: RNCC: 3 | RNVC: 2
12389493: RNCC: 5 | RNVC: 2

5 Nov 1993

3040-01-383-5124
Mechanical Drive Housing

013835124
2585718: RNCC: 3 | RNVC: 2

25 Nov 1993

3040-01-383-5757
Control Cam

013835757
8820049-1: RNCC: 3 | RNVC: 2
8820049-1: RNCC: 5 | RNVC: 9
8820049-1: RNCC: 5 | RNVC: 9
8820049: RNCC: D | RNVC: 9

25 Nov 1993

3040-01-384-1123
Rigid Connecting Link

013841123
12350480-2: RNCC: 3 | RNVC: 2
12350480: RNCC: D | RNVC: 9

8 Dec 1993

3040-01-384-6372
Control Cam

013846372
R8924439: RNCC: 3 | RNVC: 2
2BV145: RNCC: C | RNVC: 1

20 Dec 1993

3040-01-385-5989
Straight Shaft

013855989
A3153981: RNCC: 3 | RNVC: 2

14 Jan 1994

3040-01-385-8951
Mechanical Drive Housing

013858951
912C0401: RNCC: 3 | RNVC: 2

21 Jan 1994

3040-01-387-7213
Shouldered Axle

013877213
12418482: RNCC: 3 | RNVC: 2
12418482: RNCC: 5 | RNVC: 2
12418482: RNCC: 5 | RNVC: 2

10 Mar 1994

3040-01-389-0506
Counterbalance Weight

013890506
123-1467-01: RNCC: 3 | RNVC: 2
123-1467-01: RNCC: 5 | RNVC: 2

14 Apr 1994

3040-01-389-2299
Piston Rod Guide

013892299
R910910598: RNCC: 3 | RNVC: 2
910598: RNCC: 3 | RNVC: 9
00910598: RNCC: 5 | RNVC: 9

20 Apr 1994

3040-01-389-8971
Bell Crank

013898971
214-010-571-101: RNCC: 3 | RNVC: 2
214-010-571: RNCC: D | RNVC: 9

6 May 1994

3040-01-387-8305
Nonrotating Shaft Eye Bracket

013878305
6532C883-1: RNCC: 3 | RNVC: 2
6532C883-1: RNCC: C | RNVC: 1

14 Mar 1994

3040-01-391-0863
Extension Shaft

013910863
3113AS654-2: RNCC: 3 | RNVC: 2
3113AS654: RNCC: D | RNVC: 9

3 Jun 1994

3040-01-391-3536
Rotating Shaft Eye Bracket

013913536
12147-9501: RNCC: 3 | RNVC: 2
50052-512: RNCC: 5 | RNVC: 9

9 Jun 1994

3040-01-393-1007
Shouldered Shaft

013931007
3326-9-47: RNCC: 3 | RNVC: 9
232536-0-51: RNCC: 5 | RNVC: 9

13 Jul 1994

3040-01-393-5240
Rigid Connecting Link

013935240
8D00080-1: RNCC: 3 | RNVC: 2
8D00080-1: RNCC: 5 | RNVC: 9
8D00080: RNCC: D | RNVC: 9

21 Jul 1994

3040-01-393-7983
Linear Actuating Cylinder Assembly

013937983
8D00146-1: RNCC: 3 | RNVC: 2
8D00146-1: RNCC: 5 | RNVC: 9

27 Jul 1994

3040-01-396-7813
Shouldered Shaft

013967813
211048210: RNCC: 3 | RNVC: 2
6404316 FIND 51: RNCC: 5 | RNVC: 2
566-6404316 FIND 51: RNCC: 5 | RNVC: 2

23 Sep 1994

3040-01-397-7835
Shouldered Shaft

013977835
12371047: RNCC: 3 | RNVC: 2

20 Oct 1994

3040-01-399-0842
Straight Shaft

013990842
13261: RNCC: 3 | RNVC: 2
13261: RNCC: 5 | RNVC: 2
13261: RNCC: 5 | RNVC: 2
13261-G: RNCC: D | RNVC: 9

16 Nov 1994

3040-01-399-4369
Remote Control Lever

013994369
707001-1: RNCC: 3 | RNVC: 2
707001-1: RNCC: 3 | RNVC: 9

24 Nov 1994

3040-01-400-3196
Control Cam

014003196
801-6404978-49: RNCC: 3 | RNVC: 2
211094609: RNCC: 5 | RNVC: 2
21107176: RNCC: 5 | RNVC: 9
801-6404978-52: RNCC: C | RNVC: 1
801-6404978: RNCC: D | RNVC: 9
6404978: RNCC: D | RNVC: 9

14 Dec 1994

3040-01-399-4302
Rigid Connecting Link

013994302
N61472: RNCC: 3 | RNVC: 2
14801N PC NO 80: RNCC: 5 | RNVC: 2
61472: RNCC: 5 | RNVC: 2
N61472: RNCC: 5 | RNVC: 2
41637: RNCC: C | RNVC: 1

24 Nov 1994

3040-01-399-5702
Shouldered Shaft

013995702
36-155-051: RNCC: 3 | RNVC: 2
1020-02-D P 4: RNCC: 5 | RNVC: 2
1021-02-D P 4: RNCC: 5 | RNVC: 2

30 Nov 1994

3040-01-407-4526
Quiet Element

014074526
3799145-1: RNCC: 3 | RNVC: 2
3799145-1: RNCC: 5 | RNVC: 9
3798347-16: RNCC: 5 | RNVC: 9
3798347-16: RNCC: 5 | RNVC: 9
3798347-1: RNCC: 5 | RNVC: 9

28 Jan 1995

3040-01-407-6041
Straight Shaft

014076041
5350-4013: RNCC: 3 | RNVC: 2
9057-4020-22: RNCC: 5 | RNVC: 2

31 Jan 1995

3040-01-407-6873
Rotating Shaft Eye Bracket

014076873
64A90C258-1: RNCC: 3 | RNVC: 2

3 Feb 1995

3040-01-408-1504
Linear Actuating Cylinder Assembly Parts Kit

014081504
9-752-100810: RNCC: 3 | RNVC: 2
9-752-100810: RNCC: 5 | RNVC: 2
9-752-100810: RNCC: 5 | RNVC: 2

10 Feb 1995

3040-01-408-1503
Linear Actuating Cylinder Assembly Parts Kit

014081503
9-752-100964: RNCC: 3 | RNVC: 2
9-752-100964: RNCC: 5 | RNVC: 2
9-752-100964: RNCC: 5 | RNVC: 2

10 Feb 1995

3040-01-408-3172
Linear Actuating Cylinder Assembly Parts Kit

014083172
9-752-101082: RNCC: 3 | RNVC: 2
9-752-101082: RNCC: 5 | RNVC: 2
9-752-101082: RNCC: 5 | RNVC: 2

14 Feb 1995

Load More Results