What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 116 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 116 of 300

3040-01-523-7532
Shaft Retaining Plate

015237532
754-6726717-AY97: RNCC: 3 | RNVC: 2
211096747: RNCC: 5 | RNVC: 2

15 Sep 2004

3040-01-525-5203
Straight Shaft

015255203
111203: RNCC: 3 | RNVC: 2

15 Nov 2004

3040-01-526-2829
Pawl

015262829
05044800: RNCC: 3 | RNVC: 2

14 Dec 2004

3040-01-526-4293
Push-Pull Control Assembly Parts Kit

015264293
65204-00: RNCC: 3 | RNVC: 2

16 Dec 2004

3040-01-526-4897
Flexible Shaft Assembly

015264897
57353-130FT0IN: RNCC: 3 | RNVC: 2

20 Dec 2004

3040-01-526-2206
Shouldered Shaft

015262206
33902340: RNCC: 3 | RNVC: 2

11 Dec 2004

3040-01-461-5949
Piston Rod Guide

014615949
3608786-6: RNCC: 3 | RNVC: 2
3608786: RNCC: D | RNVC: 9

18 Dec 1998

3040-01-461-3297
Straight Axle

014613297
2559791-6: RNCC: 3 | RNVC: 2

9 Dec 1998

3040-01-462-4284
Straight Shaft

014624284
65396-00014-103: RNCC: 3 | RNVC: 2

3 Feb 1999

3040-01-484-6546
Spline Adapter

014846546
3025320: RNCC: 3 | RNVC: 2
3025320: RNCC: 5 | RNVC: 2

3 May 2001

3040-01-491-9436
Lever And Roller Assembly

014919436
EJ-32064: RNCC: 3 | RNVC: 2
EJ-22114 ITEM 3: RNCC: 5 | RNVC: 2

7 Nov 2001

3040-01-485-5129
Extension Shaft

014855129
556-7106779-67: RNCC: 3 | RNVC: 2
H79208002-67: RNCC: 5 | RNVC: 2
H792-8002-67: RNCC: C | RNVC: 1
7106779: RNCC: D | RNVC: 9

30 May 2001

3040-01-493-8852
Rigid Connecting Link

014938852
8100-1251-0192: RNCC: 1 | RNVC: 2
8100-1251-0192 PC 152 & 153: RNCC: 3 | RNVC: 2

24 Jan 2002

3040-01-485-9342
Straight Shaft

014859342
167-7066804-84: RNCC: 3 | RNVC: 2
H547-2002-84: RNCC: 5 | RNVC: 2
7066804: RNCC: D | RNVC: 9

12 Jun 2001

3040-01-457-1160
Piston Rod Guide

014571160
21338-1004-1: RNCC: 3 | RNVC: 2
21338 FIND 15: RNCC: 5 | RNVC: 9

13 Jul 1998

3040-01-458-2805
Shouldered Shaft

014582805
G10532G1: RNCC: 3 | RNVC: 2
36B511081G1: RNCC: 5 | RNVC: 9
36B511081G1: RNCC: 5 | RNVC: 9

20 Aug 1998

3040-01-458-1499
Rigid Connecting Link

014581499
845-7069127-X-41: RNCC: 3 | RNVC: 1

14 Aug 1998

3040-01-459-0031
Housing Adapter

014590031
8926638: RNCC: 3 | RNVC: 2
2GH690: RNCC: 5 | RNVC: 2
2GH690: RNCC: 5 | RNVC: 9

17 Sep 1998

3040-01-460-0968
Straight Shaft

014600968
12466643: RNCC: 3 | RNVC: 2

27 Oct 1998

3040-01-461-3328
Manual Control Lever

014613328
1378AS271-1: RNCC: 3 | RNVC: 2

9 Dec 1998

3040-01-461-3296
Mechanical Drive Housing

014613296
64A98D281-3: RNCC: 3 | RNVC: 2

9 Dec 1998

3040-01-462-2140
Linear Actuating Cylinder Assembly

014622140
AG189985F: RNCC: 3 | RNVC: 2
5038011: RNCC: 5 | RNVC: 9
2.50 CBB-2HLTVS14C X 4.250: RNCC: 5 | RNVC: 9

26 Jan 1999

3040-01-467-9099
Linear Actuating Cylinder Assembly

014679099
AG201172A0: RNCC: 3 | RNVC: 2

20 Sep 1999

3040-01-468-0848
Nonaircraft Mechanical Actuator

014680848
J15662091-2: RNCC: 3 | RNVC: 2
15662091-2: RNCC: 3 | RNVC: 9
15666126-2: RNCC: 5 | RNVC: 9
15662090 FN 28: RNCC: 5 | RNVC: 9
15662091-2: RNCC: 5 | RNVC: 9
15662090 FN 28: RNCC: 5 | RNVC: 9
15666126-2: RNCC: 5 | RNVC: 9

28 Sep 1999

3040-01-469-6547
Rigid Connecting Link

014696547
821338-1: RNCC: 3 | RNVC: 2

18 Nov 1999

3040-01-469-6631
Control Cam

014696631
814325-1: RNCC: 3 | RNVC: 2

18 Nov 1999

3040-01-469-6327
Piston Ring

014696327
742B8MT-161-P20: RNCC: 3 | RNVC: 2
264438: RNCC: 5 | RNVC: 2

17 Nov 1999

3040-01-471-9296
Counterbalance Weight

014719296
901-015-024-107: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-462-9514
Straight Shaft

014629514
GTXZ-99-07-41: RNCC: 3 | RNVC: 9
GXLF-99-16-016-0: RNCC: 5 | RNVC: 2
GTXZ-99-07-41: RNCC: 5 | RNVC: 9

25 Feb 1999

3040-01-462-9997
Linear Actuating Cylinder Assembly Parts Kit

014629997
PK252HK001: RNCC: 3 | RNVC: 2

1 Mar 1999

3040-01-463-1714
Rigid Connecting Link

014631714
803-6397269 PC79 ZINC PLATED: RNCC: 3 | RNVC: 2
167-6926161 PC79 ZINC PLATED: RNCC: 5 | RNVC: 2
803-6397269 PC NO 79: RNCC: 5 | RNVC: 2
8100-1251-0307 PC NO 105: RNCC: 5 | RNVC: 2
8100-1251-0307: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9

10 Mar 1999

3040-01-463-4095
Straight Axle

014634095
L20500-6: RNCC: 3 | RNVC: 2

19 Mar 1999

3040-01-463-9488
Hydraulic Accumulator Cylinder

014639488
845-7325735-1: RNCC: 3 | RNVC: 2
845-7325735-1: RNCC: 5 | RNVC: 2
845-4457601 PIECE 1: RNCC: 5 | RNVC: 9
7325735: RNCC: D | RNVC: 9

10 Apr 1999

3040-01-463-9109
Rigid Connecting Link

014639109
803-6397268 PC 71: RNCC: 3 | RNVC: 2
6926161 PC 71: RNCC: 5 | RNVC: 2
803-6397268 PC 73 ZINC PLATED: RNCC: 5 | RNVC: 2
803-6397269 PC 45: RNCC: 5 | RNVC: 2
6397269: RNCC: D | RNVC: 9

8 Apr 1999

3040-01-465-1746
Manual Control Lever

014651746
530256: RNCC: 3 | RNVC: 2
530256: RNCC: 5 | RNVC: 9
530256: RNCC: 5 | RNVC: 9

25 May 1999

3040-01-465-6003
Pawl

014656003
160840-76530: RNCC: 3 | RNVC: 9
160840-76530: RNCC: 5 | RNVC: 2
160840-76530: RNCC: 5 | RNVC: 2
160840-76530: RNCC: 5 | RNVC: 9
160840-76530: RNCC: 5 | RNVC: 9
160840-76530: RNCC: C | RNVC: 1

15 Jun 1999

3040-01-466-7098
Counterbalance Weight

014667098
901-015-024-103: RNCC: 3 | RNVC: 2

29 Jul 1999

3040-01-466-5901
Linear Actuating Cylinder Piston Rod

014665901
3253307-1: RNCC: 3 | RNVC: 2
3798329-1-8: RNCC: 3 | RNVC: 2
3253307-A: RNCC: C | RNVC: 1
3253307: RNCC: D | RNVC: 9

26 Jul 1999

3040-01-467-4681
Mechanical Drive Housing

014674681
A2-3200-W-1869: RNCC: 3 | RNVC: 2
A2-3200-W-1869: RNCC: 5 | RNVC: 2

31 Aug 1999

3040-01-467-9092
Linear Actuating Cylinder Assembly

014679092
AG201176F0: RNCC: 3 | RNVC: 2

20 Sep 1999

3040-01-473-3738
Shouldered Shaft

014733738
SGT519-2: RNCC: 3 | RNVC: 2
SGT519-2: RNCC: 5 | RNVC: 1

6 Apr 2000

3040-01-473-8407
Straight Shaft

014738407
AT180041: RNCC: 3 | RNVC: 9
AT180041: RNCC: 5 | RNVC: 9

18 Apr 2000

3040-01-474-4373
Rigid Connecting Link

014744373
124-4322615 PC 57: RNCC: 3 | RNVC: 2
4322615: RNCC: D | RNVC: 9

3 May 2000

3040-01-474-9198
Mechanically Actuated Spindle

014749198
124-4322618 PC 21: RNCC: 3 | RNVC: 2
1522-41: RNCC: D | RNVC: 9

17 May 2000

3040-01-475-5307
Rigid Connecting Link

014755307
124-4322615 PC 17: RNCC: 3 | RNVC: 2
4322615: RNCC: D | RNVC: 9

7 Jun 2000

3040-01-475-9145
Pawl

014759145
4660898: RNCC: 3 | RNVC: 2
4660898: RNCC: 3 | RNVC: 9
4660898: RNCC: 5 | RNVC: 2

19 Jun 2000

3040-01-475-9618
Shouldered Shaft

014759618
1725185: RNCC: 3 | RNVC: 2

20 Jun 2000

3040-01-476-1994
Barrel Cam

014761994
721-7070284-48: RNCC: 3 | RNVC: 2
7070284-0048: RNCC: 5 | RNVC: 2
H864-1401-48: RNCC: 5 | RNVC: 9
7070284-48: RNCC: 5 | RNVC: 9
7070284: RNCC: D | RNVC: 9

29 Jun 2000

3040-01-476-1449
Shouldered Shaft

014761449
13225E9552-4: RNCC: 3 | RNVC: 2
13225E9552: RNCC: D | RNVC: 9

27 Jun 2000

3040-01-477-7889
Body Hub

014777889
9904106186: RNCC: 3 | RNVC: 2

18 Aug 2000

3040-01-477-9645
Straight Shaft

014779645
12447060-1: RNCC: 3 | RNVC: 2
12447060-1: RNCC: 5 | RNVC: 2
3040PL0837146: RNCC: 6 | RNVC: 9
12447060: RNCC: D | RNVC: 9

25 Aug 2000

NSN 3040-01-478-0406 014780406 SHAFT ASSEMBLY,STRAIGHT

3040-01-478-0406
Straight Shaft Assembly

014780406
216643: RNCC: 3 | RNVC: 2

29 Aug 2000

3040-01-477-6064
Linear Actuating Cylinder Cap

014776064
6372005827: RNCC: 3 | RNVC: 2

14 Aug 2000

3040-01-478-1869
Rigid Connecting Link

014781869
74A463605-1001: RNCC: 3 | RNVC: 2

31 Aug 2000

3040-01-478-1991
Transmission Sleeve

014781991
767578: RNCC: 3 | RNVC: 2

31 Aug 2000

3040-01-478-3282
Hyd Filter Parts Kt

014783282
FTS-0001: RNCC: 3 | RNVC: 2

7 Sep 2000

3040-01-478-3624
Nonaircraft Mechanical Actuator

014783624
240652: RNCC: 3 | RNVC: 2
243245: RNCC: C | RNVC: 1

8 Sep 2000

3040-01-478-8203
Ai Splined Coupling

014788203
2746347-1: RNCC: 3 | RNVC: 2

28 Sep 2000

3040-01-479-8312
Straight Shaft

014798312
HABG002: RNCC: 3 | RNVC: 2

31 Oct 2000

3040-01-480-7536
Planetary Gears Carrier

014807536
8675611: RNCC: 3 | RNVC: 9
5714593: RNCC: 5 | RNVC: 2
24241409: RNCC: 5 | RNVC: 2
24212052: RNCC: 5 | RNVC: 9
3040PL1943792: RNCC: 6 | RNVC: 9

5 Dec 2000

3040-01-481-0003
Rigid Connecting Link

014810003
74A640068-1001: RNCC: 3 | RNVC: 2

14 Dec 2000

3040-01-481-2046
Rigid Connecting Link

014812046
8100-1256-0262 PT NO 221: RNCC: 3 | RNVC: 2
8100-1256-0262: RNCC: D | RNVC: 9

21 Dec 2000

3040-01-481-0542
Control Cam

014810542
2643-670-01-13: RNCC: 3 | RNVC: 2
845-7108792-13: RNCC: 5 | RNVC: 2
2643-670-01: RNCC: D | RNVC: 9
7108792: RNCC: D | RNVC: 9

15 Dec 2000

3040-01-482-3276
Mechanically Actuated Spindle

014823276
803-6397269 PC 96: RNCC: 3 | RNVC: 2
8100-1251-0308 PC NO 96: RNCC: 5 | RNVC: 2
6397269: RNCC: D | RNVC: 9
8100-1251-0308: RNCC: D | RNVC: 9

15 Feb 2001

3040-01-482-4678
Rigid Connecting Link

014824678
8100-1251-0307 PC NO 56: RNCC: 3 | RNVC: 2
8100-1251-0192 PC 135: RNCC: 3 | RNVC: 9
8100-1251-0307: RNCC: D | RNVC: 9
8100-1251-0192: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9

23 Feb 2001

3040-01-482-7691
Linear Actuating Cylinder Piston Rod

014827691
3253363-1: RNCC: 3 | RNVC: 2
3253363-1: RNCC: 5 | RNVC: 9
3799813 FIND 21: RNCC: 5 | RNVC: 9
3799813: RNCC: D | RNVC: 9

2 Mar 2001

3040-01-482-9542
Bell Crank

014829542
L6410350-013: RNCC: 3 | RNVC: 2
L6410350: RNCC: D | RNVC: 9

9 Mar 2001

3040-01-483-4417
Brake Disc

014834417
74771: RNCC: 3 | RNVC: 2

29 Mar 2001

3040-01-484-6183
Rotating Shaft Eye Bracket

014846183
3896335: RNCC: 3 | RNVC: 2

2 May 2001

3040-01-484-6583
Shouldered Shaft

014846583
3070072: RNCC: 3 | RNVC: 2
3070072: RNCC: 5 | RNVC: 2

3 May 2001

3040-01-483-0341
Rigid Connecting Link

014830341
6397269 PC NO 26: RNCC: 3 | RNVC: 2
8100-1251-0307 PC NO 52: RNCC: 5 | RNVC: 2
8100-1251-0307: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9

14 Mar 2001

3040-01-488-7612
Mechanically Actuated Spindle

014887612
5D87161-001: RNCC: 3 | RNVC: 2
6510E68FN16: RNCC: 5 | RNVC: 2
6510E68: RNCC: D | RNVC: 9
5D87161: RNCC: D | RNVC: 9

4 Sep 2001

3040-01-493-2180
Flexible Shaft Assembly

014932180
22001-100 X 452IN: RNCC: 3 | RNVC: 2
B-409-22001: RNCC: D | RNVC: 9

20 Dec 2001

3040-01-494-4654
Shouldered Shaft

014944654
6810003244: RNCC: 3 | RNVC: 2

13 Feb 2002

3040-01-495-7628
Pivot Block

014957628
8325-1: RNCC: 3 | RNVC: 2
1028-1: RNCC: 3 | RNVC: 9

25 Mar 2002

3040-01-490-4286
Airc Spline Adapter

014904286
101999-15-1: RNCC: 3 | RNVC: 2

27 Sep 2001

3040-01-495-9856
Linear Actuating Cylinder Assembly

014959856
02040: RNCC: 3 | RNVC: 2

29 Mar 2002

3040-01-496-9007
Counterbalance Weight

014969007
5126T45P01: RNCC: 3 | RNVC: 2

1 May 2002

3040-01-496-3675
Mechanically Actuated Spindle

014963675
29537935: RNCC: 3 | RNVC: 2
22KP842: RNCC: 5 | RNVC: 1

12 Apr 2002

3040-01-497-3016
Transmission Sleeve

014973016
41305: RNCC: 3 | RNVC: 2
LA424-41300 ITEM 5: RNCC: 5 | RNVC: 2
LA424-41300: RNCC: D | RNVC: 9

16 May 2002

3040-01-498-4292
Straight Shaft

014984292
518-4457096-52: RNCC: 3 | RNVC: 2
4457096-0052: RNCC: 5 | RNVC: 2
2013-54-52: RNCC: 5 | RNVC: 9
4457096-52: RNCC: 5 | RNVC: 9
2013-54-52: RNCC: 5 | RNVC: 9
H600-2013-54-52: RNCC: 5 | RNVC: 9
518-4457096: RNCC: D | RNVC: 9

26 Jun 2002

3040-01-498-4354
Stub Shaft Special

014984354
124A8400AR001: RNCC: 3 | RNVC: 1
36R937015ABPC23: RNCC: 5 | RNVC: 1

26 Jun 2002

3040-01-499-6572
Nonrotating Shaft Eye Bracket

014996572
11-1-7004-1: RNCC: 3 | RNVC: 2

30 Jul 2002

3040-01-499-9429
Bell Crank

014999429
563-7066808-A37: RNCC: 3 | RNVC: 2
563-7066806-15: RNCC: 5 | RNVC: 2
H552-0601-15: RNCC: 5 | RNVC: 2
H552-0603-A37: RNCC: 5 | RNVC: 2
563-7066808: RNCC: D | RNVC: 9

8 Aug 2002

3040-01-500-4939
Linear Actuating Cylinder Assembly

015004939
3860881: RNCC: 3 | RNVC: 2
3860881: RNCC: 5 | RNVC: 2
872837-0: RNCC: 5 | RNVC: 9
872837-0: RNCC: 5 | RNVC: 9
3860881: RNCC: 5 | RNVC: 9
872837-0: RNCC: 5 | RNVC: 9

28 Aug 2002

3040-01-499-8063
Mechanically Actuated Spindle

014998063
167-7379128 ITEM 31: RNCC: 3 | RNVC: 2
7379128: RNCC: D | RNVC: 9

5 Aug 2002

3040-01-499-8061
Mechanically Actuated Spindle

014998061
167-7379128 ITEM 25: RNCC: 3 | RNVC: 2
25: RNCC: 5 | RNVC: 2
7379128: RNCC: D | RNVC: 9

5 Aug 2002

3040-01-501-7529
Shouldered Shaft

015017529
44-62820T 1: RNCC: 3 | RNVC: 2

15 Oct 2002

3040-01-503-2438
Rigid Connecting Link

015032438
4724-101: RNCC: 3 | RNVC: 2
74J678008-101: RNCC: 5 | RNVC: 2

10 Dec 2002

3040-01-503-3664
Manual Control Lever

015033664
MC14172: RNCC: 3 | RNVC: 2
MC14172: RNCC: 5 | RNVC: 9
MC14172: RNCC: 5 | RNVC: 9

13 Dec 2002

3040-01-503-3486
Universal Drive Shaft

015033486
70022052: RNCC: 3 | RNVC: 2
501007034: RNCC: 5 | RNVC: 9
1321176: RNCC: 5 | RNVC: 9
501007939: RNCC: 5 | RNVC: 9
1321176: RNCC: 5 | RNVC: 9

13 Dec 2002

3040-01-503-4581
Shouldered Shaft

015034581
596-7409754-9: RNCC: 3 | RNVC: 2
B831-7120-9: RNCC: 5 | RNVC: 2
7409754-9: RNCC: D | RNVC: 9

18 Dec 2002

3040-01-503-5706
Assembly Dead Bolt Shaft

015035706
596-7409749-A10: RNCC: 3 | RNVC: 2
596-7409742-95: RNCC: 5 | RNVC: 2
B831-6000-95: RNCC: 5 | RNVC: 2
B831-6600-A10: RNCC: 5 | RNVC: 2
B831-6000: RNCC: D | RNVC: 9
7409742: RNCC: D | RNVC: 9

23 Dec 2002

3040-01-503-6580
Rigid Connecting Link

015036580
6623569: RNCC: 3 | RNVC: 2
6623569: RNCC: 5 | RNVC: 9

2 Jan 2003

3040-01-503-9170
Linear Actuating Cylinder Assembly

015039170
XA2524R13-1: RNCC: 3 | RNVC: 2
255-450 ITEM 19: RNCC: 5 | RNVC: 2

13 Jan 2003

3040-01-504-2438
Linear Actuating Cylinder Piston

015042438
595-7067878-3: RNCC: 3 | RNVC: 2
H692-1805-3: RNCC: 5 | RNVC: 2
7067878: RNCC: D | RNVC: 9

23 Jan 2003

3040-01-504-9958
Rigid Connecting Link

015049958
3518-18: RNCC: 3 | RNVC: 2

18 Feb 2003

3040-01-505-0945
Remote Control Lever

015050945
3528-7: RNCC: 3 | RNVC: 2
3528 ITEM 4: RNCC: 5 | RNVC: 2

21 Feb 2003

3040-01-505-1163
Rigid Connecting Link

015051163
69-10938: RNCC: 3 | RNVC: 2
69-10938: RNCC: 5 | RNVC: 9

24 Feb 2003

3040-01-503-7187
Handwheel Stud

015037187
82A5027A1682: RNCC: 3 | RNVC: 2

6 Jan 2003

3040-01-509-0411
Nonrotating Shaft Eye Bracket

015090411
7004078: RNCC: 3 | RNVC: 2

10 Jun 2003

3040-01-509-9780
Shouldered Shaft

015099780
7249551: RNCC: 3 | RNVC: 2

10 Jul 2003

3040-01-509-7697
Piston Follower Cup

015097697
172-489: RNCC: 3 | RNVC: 2

2 Jul 2003

3040-01-512-0389
Shift Shaft

015120389
824145: RNCC: 3 | RNVC: 2
824145: RNCC: 5 | RNVC: 2

21 Aug 2003

3040-01-511-9560
Nonrotating Shaft Eye Bracket

015119560
854653 1: RNCC: 3 | RNVC: 2
896662: RNCC: 5 | RNVC: 2
8M0039052: RNCC: 5 | RNVC: 2

20 Aug 2003

3040-01-512-8748
Body Hub

015128748
0744690: RNCC: 3 | RNVC: 2

11 Sep 2003

3040-01-513-9602
Spur Gearshaft

015139602
419-0025-01: RNCC: 3 | RNVC: 2
419-0025-01: RNCC: 3 | RNVC: 9

10 Oct 2003

3040-01-514-1915
Brake Disc

015141915
3D1099: RNCC: 3 | RNVC: 2

20 Oct 2003

3040-01-514-6669
Shouldered Shaft

015146669
P-10731: RNCC: 3 | RNVC: 2

31 Oct 2003

3040-01-514-4057
Manual Control Lever

015144057
DN60-1.5-18: RNCC: 3 | RNVC: 2
DN60-1.5-18: RNCC: 3 | RNVC: 9
DNX62-1.5H3-000 ITEM 31: RNCC: 5 | RNVC: 9
DNX62-1.5H3-000 ITEM 31: RNCC: C | RNVC: 1
DNX62-1.5H3-000: RNCC: D | RNVC: 9

24 Oct 2003

3040-01-515-6134
Control Cable Assembly

015156134
1018981: RNCC: 3 | RNVC: 2
ID83CC-1.50: RNCC: 5 | RNVC: 9

2 Dec 2003

3040-01-515-7250
Kit

015157250
P182149: RNCC: 3 | RNVC: 2
C193915 REF.5B,5C,5D,5E,5F: RNCC: 5 | RNVC: 2

5 Dec 2003

3040-01-515-7536
Linear Actuating Cylinder Piston

015157536
R433045247: RNCC: 3 | RNVC: 9
C405327 REF.13,17,19: RNCC: 5 | RNVC: 2
P194123-0250: RNCC: 5 | RNVC: 9
P194123-0250: RNCC: 5 | RNVC: 9

8 Dec 2003

3040-01-515-5520
Linear Actuating Cylinder Piston

015155520
42118: RNCC: 3 | RNVC: 2
12M23-42110 ITEM 8: RNCC: 5 | RNVC: 2
12M23-42110: RNCC: D | RNVC: 9

1 Dec 2003

3040-01-516-5277
Flexible Shaft Assembly

015165277
57353-44: RNCC: 3 | RNVC: 2

9 Jan 2004

3040-01-515-6896
Linear Actuating Cylinder

015156896
R433011935: RNCC: 3 | RNVC: 2
173732: RNCC: 5 | RNVC: 2
C405327 REV A: RNCC: 5 | RNVC: 9
C405327-0250: RNCC: 5 | RNVC: 9
R433011935: RNCC: 5 | RNVC: 9

4 Dec 2003

3040-01-516-6450
Shouldered Shaft

015166450
3637AS683-2: RNCC: 3 | RNVC: 2
3637AS683: RNCC: D | RNVC: 9

14 Jan 2004

3040-01-516-5272
Flexible Shaft Assembly

015165272
57353-58: RNCC: 3 | RNVC: 2

9 Jan 2004

3040-01-517-7473
Straight Shaft

015177473
465-5098: RNCC: 3 | RNVC: 2
465-5098: RNCC: 3 | RNVC: 9
465-5098: RNCC: 5 | RNVC: 2

18 Feb 2004

3040-01-517-7817
Straight Shaft

015177817
465-5076: RNCC: 3 | RNVC: 2
465-5076: RNCC: 3 | RNVC: 9
465-5076: RNCC: 5 | RNVC: 2
10105651: RNCC: 6 | RNVC: 9
3040PL1496144: RNCC: 6 | RNVC: 9

19 Feb 2004

3040-01-518-2005
Brake Disc

015182005
PL76222 ITEM 11: RNCC: 3 | RNVC: 9
74349: RNCC: 5 | RNVC: 2

4 Mar 2004

3040-01-519-2221
Manual Control Lever

015192221
660150017: RNCC: 3 | RNVC: 2

9 Apr 2004

3040-01-518-6624
Straight Shaft

015186624
7403272: RNCC: 3 | RNVC: 2

18 Mar 2004

3040-01-520-3604
Spur Gearshaft

015203604
167-6404600 FIND 76: RNCC: 3 | RNVC: 2
211063400: RNCC: 5 | RNVC: 2

10 May 2004

3040-01-521-2075
Bell Crank

015212075
709F4111: RNCC: 3 | RNVC: 2

14 Jun 2004

3040-01-521-1855
Bell Crank

015211855
709F4265: RNCC: 3 | RNVC: 2

14 Jun 2004

3040-01-522-0152
Friction Lining Set

015220152
040-210-00: RNCC: 3 | RNVC: 9

14 Jul 2004

3040-01-522-2134
Nonaircraft Mechanical Actuator

015222134
B831-9233-9: RNCC: 3 | RNVC: 2
596-7410248-71: RNCC: 5 | RNVC: 1
B831-9512-71: RNCC: 5 | RNVC: 1
596-7410426-9: RNCC: 5 | RNVC: 2

22 Jul 2004

3040-01-522-5573
Manual Control Lever

015225573
K1394: RNCC: 3 | RNVC: 2

4 Aug 2004

3040-01-522-6245
Straight Shaft

015226245
115-9403: RNCC: 3 | RNVC: 2
5KK10: RNCC: 5 | RNVC: 2
5KK10: RNCC: 5 | RNVC: 9

5 Aug 2004

3040-01-523-0720
Shouldered Shaft Assembly

015230720
70700-20130-044: RNCC: 3 | RNVC: 2
70700-20130: RNCC: D | RNVC: 9

19 Aug 2004

3040-01-523-4615
Breather

015234615
9R9925: RNCC: 3 | RNVC: 2
9R-9925: RNCC: 5 | RNVC: 2

3 Sep 2004

3040-01-523-5958
Housing Adapter

015235958
HM025-417-1: RNCC: 3 | RNVC: 2
HM025-417: RNCC: D | RNVC: 9

9 Sep 2004

3040-01-523-3994
Shaft Collar

015233994
23-86770: RNCC: 3 | RNVC: 2

1 Sep 2004

3040-01-524-2829
Straight Shaft

015242829
0223-02383-033: RNCC: 3 | RNVC: 2
0221-12662-922 REF 8: RNCC: 5 | RNVC: 2

28 Sep 2004

3040-01-524-3231
Rigid Connecting Link

015243231
123077: RNCC: 3 | RNVC: 2

29 Sep 2004

3040-01-525-0719
Hub Clamp

015250719
SSTGK-1: RNCC: 3 | RNVC: 9
247211: RNCC: 5 | RNVC: 2

27 Oct 2004

3040-01-524-7586
Nonrotating Shaft Eye Bracket

015247586
12488056: RNCC: 3 | RNVC: 2

15 Oct 2004

3040-01-526-4595
Straight Shaft

015264595
26-13781-2: RNCC: 3 | RNVC: 2
26-13781: RNCC: D | RNVC: 9

16 Dec 2004

3040-01-526-4906
Flexible Shaft Assembly

015264906
65042-147FT0IN: RNCC: 3 | RNVC: 2

20 Dec 2004

3040-01-526-5121
Flexible Shaft Assembly

015265121
65042-145FT0IN: RNCC: 3 | RNVC: 2

21 Dec 2004

3040-01-526-5871
Push-Pull Control Assembly

015265871
200-04333-0096: RNCC: 3 | RNVC: 2

23 Dec 2004

3040-01-471-9750
Spline Adapter

014719750
901-046-615-101: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-472-8474
Mechanically Actuated Spindle

014728474
124-4322618 PC3B: RNCC: 3 | RNVC: 2
124-4322618 PC 3: RNCC: 5 | RNVC: 9
124-4322618 PC: RNCC: C | RNVC: 1

20 Mar 2000

3040-01-476-3773
Mechanically Actuated Spindle

014763773
124-4322609 PC 39: RNCC: 3 | RNVC: 2
4322609: RNCC: D | RNVC: 9

11 Jul 2000

3040-01-476-3951
Rigid Connecting Link

014763951
HN152-1103 PART NO. 56: RNCC: 3 | RNVC: 2
HN152-1104 PART NO. 32: RNCC: 5 | RNVC: 2

11 Jul 2000

3040-01-476-9890
Shaft Retaining Plate

014769890
6308000209: RNCC: 3 | RNVC: 2

27 Jul 2000

3040-01-491-5718
Flexible Shaft Assembly

014915718
22001-100 X 136IN: RNCC: 3 | RNVC: 2
22001-100 X 11FT 4IN: RNCC: 5 | RNVC: 2
B-409-22001-100: RNCC: 5 | RNVC: 9
22001: RNCC: D | RNVC: 9

25 Oct 2001

3040-01-493-4213
Spur Gearshaft

014934213
596-7409770-5: RNCC: 3 | RNVC: 2
B831-9231-5: RNCC: 5 | RNVC: 2
B831-9231: RNCC: D | RNVC: 9
7409770: RNCC: D | RNVC: 9

7 Jan 2002

3040-01-488-8232
Shouldered Shaft

014888232
5D87954-001: RNCC: 3 | RNVC: 2
6512E47FN6: RNCC: 5 | RNVC: 2
5D87954: RNCC: D | RNVC: 9
6512E47: RNCC: D | RNVC: 9

5 Sep 2001

3040-01-488-9674
Linear Actuating Cylinder

014889674
372 5033 801: RNCC: 3 | RNVC: 2

7 Sep 2001

3040-01-490-3175
Thr Brkt Brg Cap

014903175
6514E15-001: RNCC: 3 | RNVC: 2
6514E15: RNCC: D | RNVC: 9

25 Sep 2001

3040-01-491-0849
Mechanical Drive Housing

014910849
12007303: RNCC: 3 | RNVC: 2

12 Oct 2001

3040-01-506-0692
Straight Axle

015060692
300-5442: RNCC: 3 | RNVC: 2
130-0484: RNCC: 3 | RNVC: 9

21 Mar 2003

3040-01-457-0460
Flexible Drive Shaft

014570460
12976082-1: RNCC: 1 | RNVC: 2
12976082-1: RNCC: 3 | RNVC: 2
12976082: RNCC: D | RNVC: 9

9 Jul 1998

3040-01-457-2968
Shouldered Shaft

014572968
9Y-4935: RNCC: 3 | RNVC: 2

18 Jul 1998

3040-01-461-7911
Control Pedal Assembly

014617911
1378AS282-1: RNCC: 3 | RNVC: 2
1378AS282: RNCC: D | RNVC: 9

5 Jan 1999

3040-01-461-9927
Linear Actuating Cylinder Assembly

014619927
AG189984D0: RNCC: 3 | RNVC: 2
2.00CKJB-2HLTVS14/14C X 6.000: RNCC: 5 | RNVC: 9
5038050: RNCC: 5 | RNVC: 9

14 Jan 1999

3040-01-462-0126
Straight Shaft

014620126
3141AS442-501: RNCC: 3 | RNVC: 2
3141AS442-501: RNCC: 5 | RNVC: 2
3141AS442: RNCC: D | RNVC: 9

15 Jan 1999

3040-01-462-2316
Counterbalance Weight

014622316
9524M50P03: RNCC: 3 | RNVC: 2
9524M50P03: RNCC: 5 | RNVC: 2

26 Jan 1999

3040-01-469-1954
Linear Actuating Cylinder Assembly

014691954
AG201173E0: RNCC: 3 | RNVC: 2

5 Nov 1999

3040-01-469-1464
Control Cam

014691464
2680757: RNCC: 3 | RNVC: 2
2680757: RNCC: 5 | RNVC: 2
10173853: RNCC: 6 | RNVC: 9

4 Nov 1999

3040-01-470-3118
Rigid Connecting Link

014703118
124-4365530 PC 12: RNCC: 3 | RNVC: 2
124-4365530: RNCC: D | RNVC: 9

15 Dec 1999

3040-01-470-6226
Mechanical Drive Housing

014706226
128-3883: RNCC: 3 | RNVC: 2
128-3883: RNCC: 5 | RNVC: 2
CV132400: RNCC: 5 | RNVC: 2

29 Dec 1999

3040-01-470-9615
Ball Joint

014709615
5339D: RNCC: 3 | RNVC: 2
37829: RNCC: 5 | RNVC: 2
37829: RNCC: 5 | RNVC: 9
S-5339D: RNCC: 5 | RNVC: 9

18 Jan 2000

3040-01-470-5803
Shaft As Lifter

014705803
139-9476: RNCC: 3 | RNVC: 2
23KP134: RNCC: 5 | RNVC: 1
139-9476: RNCC: 5 | RNVC: 2
CV133710: RNCC: 5 | RNVC: 2

27 Dec 1999

3040-01-471-9316
Counterbalance Weight

014719316
901-015-062-101: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-472-2560
Linear Actuating Cylinder Assembly

014722560
6623240: RNCC: 3 | RNVC: 2
6623240: RNCC: 5 | RNVC: 9

24 Feb 2000

3040-01-463-1927
Shouldered Shaft

014631927
7005528-1: RNCC: 3 | RNVC: 2

10 Mar 1999

3040-01-463-2377
Shouldered Shaft

014632377
45M-507: RNCC: 3 | RNVC: 2
EAOM-513-NF2-3W ITEM2: RNCC: 5 | RNVC: 9

12 Mar 1999

3040-01-463-4098
Straight Axle

014634098
L-20500-5: RNCC: 3 | RNVC: 2

19 Mar 1999

3040-01-463-4250
Rigid Connecting Link

014634250
803-6397269 PC37 ZINC PLATED: RNCC: 3 | RNVC: 2
167-6926161 PC188 ZINC PLATED: RNCC: 5 | RNVC: 2
8100-1251-0307 PC NO 63: RNCC: C | RNVC: 1
6397269: RNCC: D | RNVC: 9

19 Mar 1999

3040-01-464-2345
Shouldered Shaft

014642345
9914.0250 SHAFT(E-COATED), 9" L: RNCC: 3 | RNVC: 2
9914.0251: RNCC: 5 | RNVC: 9
IS0-18-12: RNCC: D | RNVC: 9

22 Apr 1999

3040-01-464-4069
Brake Disc

014644069
328714W: RNCC: 3 | RNVC: 2

28 Apr 1999

3040-01-464-7811
Rigid Connecting Link

014647811
805-1400074 PC 11: RNCC: 3 | RNVC: 2
074-11: RNCC: C | RNVC: 1
805-1400074: RNCC: D | RNVC: 9

10 May 1999

3040-01-466-7898
Flexible Shaft Assembly

014667898
GTC-702-25: RNCC: 3 | RNVC: 2

2 Aug 1999

3040-01-466-8135
Adjuster Ring

014668135
6138842: RNCC: 3 | RNVC: 2

3 Aug 1999

3040-01-467-9026
Linear Actuating Cylinder Assembly

014679026
AG201176C0: RNCC: 3 | RNVC: 2

20 Sep 1999

3040-01-473-8403
Linear Actuating Cylinder

014738403
4645992: RNCC: 3 | RNVC: 9
AT178705: RNCC: 5 | RNVC: 9

18 Apr 2000

3040-01-474-4782
Shouldered Shaft

014744782
0365404: RNCC: 3 | RNVC: 9
TH112033: RNCC: 5 | RNVC: 9

4 May 2000

3040-01-473-7481
Rigid Connecting Link

014737481
124-4322620 PC 18: RNCC: 3 | RNVC: 2
124-4322620 PC 18: RNCC: 5 | RNVC: 9
124-4322620: RNCC: D | RNVC: 9
4322620: RNCC: D | RNVC: 9

14 Apr 2000

3040-01-476-6992
Rigid Connecting Link

014766992
74A400927-2001: RNCC: 3 | RNVC: 2
74A400927-2001: RNCC: 5 | RNVC: 9
74A400927-2001: RNCC: C | RNVC: 1

20 Jul 2000

3040-01-475-8168
Shouldered Shaft

014758168
13492667: RNCC: 3 | RNVC: 2

14 Jun 2000

3040-01-477-6062
Linear Actuating Cylinder Piston Rod

014776062
6768004138: RNCC: 3 | RNVC: 2

14 Aug 2000

3040-01-477-6628
Shaft Collar

014776628
9364100685: RNCC: 3 | RNVC: 9
5115181050: RNCC: 5 | RNVC: 2

15 Aug 2000

3040-01-478-2149
Remote Control Lever

014782149
95001268: RNCC: 3 | RNVC: 2
216629: RNCC: 5 | RNVC: 2

31 Aug 2000

3040-01-478-2091
Linear Actuating Cylinder Piston Rod

014782091
C622375: RNCC: 3 | RNVC: 9

31 Aug 2000

3040-01-479-2341
Rigid Connecting Link

014792341
3353279: RNCC: 3 | RNVC: 2
PP4794.00.01: RNCC: 5 | RNVC: 2
3353279: RNCC: 5 | RNVC: 2
3000111: RNCC: 5 | RNVC: 9
3353279: RNCC: 5 | RNVC: 9
3353279: RNCC: 5 | RNVC: 9

16 Oct 2000

3040-01-479-4743
Housing Adapter

014794743
EP-0002702: RNCC: 3 | RNVC: 2
A37390.0100: RNCC: 5 | RNVC: 2
A373900100: RNCC: 5 | RNVC: 9

23 Oct 2000

3040-01-479-8357
Linear Actuating Cylinder Assembly

014798357
6-372-100030: RNCC: 3 | RNVC: 2

31 Oct 2000

3040-01-480-8552
Shouldered Shaft

014808552
1490044-2: RNCC: 3 | RNVC: 2
1490044-2: RNCC: 5 | RNVC: 9

7 Dec 2000

3040-01-481-6070
Housing Adapter

014816070
23511983: RNCC: 3 | RNVC: 2
DDE 23511983: RNCC: 5 | RNVC: 2

17 Jan 2001

3040-01-482-0281
Shouldered Shaft

014820281
8100-1251-0285 PT NO 43: RNCC: 3 | RNVC: 2
8100-1251-0285: RNCC: D | RNVC: 9

6 Feb 2001

3040-01-482-9081
Rigid Connecting Link

014829081
12446263: RNCC: 3 | RNVC: 2

8 Mar 2001

3040-01-483-5472
Control Cam

014835472
7377559: RNCC: 3 | RNVC: 2
D1418377: RNCC: 5 | RNVC: 2

2 Apr 2001

3040-01-484-1739
Shaft Retaining Plate

014841739
12593117: RNCC: 3 | RNVC: 2

20 Apr 2001

3040-01-485-1154
Rigid Connecting Link

014851154
805-1400056 PC 12: RNCC: 3 | RNVC: 2
805-1400056: RNCC: D | RNVC: 9

17 May 2001

3040-01-485-1191
Rigid Connecting Link

014851191
805-1400056 PC 14: RNCC: 3 | RNVC: 2
805-1400056: RNCC: D | RNVC: 9

17 May 2001

3040-01-492-9202
Linear Actuating Cylinder Piston

014929202
585-6726772-5: RNCC: 3 | RNVC: 2
211056709: RNCC: 5 | RNVC: 2
585-6726772: RNCC: D | RNVC: 9

17 Dec 2001

3040-01-487-3593
Straight Shaft

014873593
518-5004109 ITEM 33: RNCC: 3 | RNVC: 2
2014-82 ITEM 33: RNCC: 5 | RNVC: 2
2014-82: RNCC: D | RNVC: 9
5004109: RNCC: D | RNVC: 9

2 Aug 2001

3040-01-487-2274
Shaft Collar

014872274
124-7386972 PC 3: RNCC: 3 | RNVC: 2
124-7386971 PC 19: RNCC: 5 | RNVC: 2
124-7386936 PC 55: RNCC: 5 | RNVC: 2
7386936: RNCC: D | RNVC: 9
7386971: RNCC: D | RNVC: 9
7386972: RNCC: D | RNVC: 9

30 Jul 2001

3040-01-488-7451
Bell Crank Support

014887451
1276M86P02: RNCC: 3 | RNVC: 2
1276M86: RNCC: D | RNVC: 9

31 Aug 2001

3040-01-497-5199
Shouldered Shaft

014975199
154060: RNCC: 3 | RNVC: 2

22 May 2002

3040-01-497-5555
Rigid Connecting Link

014975555
B-WT76F63SH85TR: RNCC: 3 | RNVC: 2

23 May 2002

3040-01-497-9966
Rigid Connecting Link

014979966
H547-1117-89: RNCC: 3 | RNVC: 2
167-7066792-89: RNCC: 5 | RNVC: 2
167-7066792: RNCC: D | RNVC: 9

11 Jun 2002

3040-01-498-1928
Shaft Collar

014981928
SSC87: RNCC: 3 | RNVC: 2
223-7068077-51: RNCC: C | RNVC: 1
752-7068491: RNCC: D | RNVC: 9

18 Jun 2002

3040-01-498-2566
Aircra Center Shaft

014982566
3637AS805-1: RNCC: 3 | RNVC: 2
3637AS805: RNCC: D | RNVC: 9

20 Jun 2002

3040-01-498-4155
Rigid Connecting Link

014984155
167-7066792-A6: RNCC: 3 | RNVC: 2
H547-1117-A6: RNCC: 5 | RNVC: 2
7066792: RNCC: D | RNVC: 9

25 Jun 2002

3040-01-499-4206
Nonaircraft Mechanical Actuator

014994206
200105: RNCC: 3 | RNVC: 2
PL-P2M-B: RNCC: 5 | RNVC: 2

23 Jul 2002

3040-01-499-4095
Straight Shaft

014994095
736504-3: RNCC: 3 | RNVC: 2
736504-3: RNCC: 5 | RNVC: 9
736504-3: RNCC: 5 | RNVC: 9
736504-3: RNCC: 5 | RNVC: 9
736504: RNCC: D | RNVC: 9

23 Jul 2002

3040-01-500-0647
Push-Pull Control Assembly

015000647
21407239: RNCC: 3 | RNVC: 2
3851060-8: RNCC: 3 | RNVC: 9

13 Aug 2002

3040-01-500-0645
Push-Pull Control Assembly

015000645
21407237: RNCC: 3 | RNVC: 2
3851058-2: RNCC: 5 | RNVC: 9

13 Aug 2002

3040-01-500-0667
Linear Actuating Cylinder Assembly

015000667
4333: RNCC: 3 | RNVC: 2

13 Aug 2002

3040-01-500-0648
Push-Pull Control Assembly

015000648
21407241: RNCC: 3 | RNVC: 2
3851062-4: RNCC: 5 | RNVC: 9

13 Aug 2002

3040-01-500-0585
Remote Control Lever

015000585
563-7066808-91: RNCC: 3 | RNVC: 2
H552-0603-91: RNCC: 5 | RNVC: 2
563-7066808: RNCC: D | RNVC: 9

13 Aug 2002

3040-01-501-0361
Rigid Connecting Link

015010361
566-7067173-58: RNCC: 3 | RNVC: 2
H625-0312-58: RNCC: 5 | RNVC: 2
566-7067173: RNCC: D | RNVC: 9

20 Sep 2002

3040-01-501-8329
Manual Control Lever

015018329
07207001119: RNCC: 3 | RNVC: 2
20308 FIND 13: RNCC: 5 | RNVC: 2
B7202.001.119: RNCC: 5 | RNVC: 9
B7207.001.119: RNCC: C | RNVC: 1
20308: RNCC: D | RNVC: 9

17 Oct 2002

3040-01-501-9545
Shouldered Shaft

015019545
17-44166: RNCC: 3 | RNVC: 2

22 Oct 2002

3040-01-502-3735
Rigid Connecting Link

015023735
XXDA-130 ITEM 340 X1: RNCC: 3 | RNVC: 2
XXDA-130 ITEM 341 X1: RNCC: 3 | RNVC: 2
XXDA-130: RNCC: D | RNVC: 9

4 Nov 2002

3040-01-502-7010
Bevel Gearshaft

015027010
65355-12201-041: RNCC: 3 | RNVC: 2
65355-12201 REV P: RNCC: D | RNVC: 9

18 Nov 2002

3040-01-502-8526
Shaft Collar

015028526
ZH2251: RNCC: 3 | RNVC: 2
030DH2-211 ITEM9: RNCC: 5 | RNVC: 2
ZH221: RNCC: 5 | RNVC: 9
ZH2251: RNCC: C | RNVC: 1
030DH2-211: RNCC: D | RNVC: 9

21 Nov 2002

3040-01-503-2587
Straight Shaft

015032587
60-3068: RNCC: 3 | RNVC: 2
60-3068: RNCC: 5 | RNVC: 2

10 Dec 2002

3040-01-503-2810
Shouldered Shaft

015032810
1319641: RNCC: 3 | RNVC: 2
734309363: RNCC: 5 | RNVC: 9
1319641: RNCC: 5 | RNVC: 9

11 Dec 2002

3040-01-503-2678
Shouldered Shaft

015032678
1319576: RNCC: 3 | RNVC: 2
734310386: RNCC: 5 | RNVC: 9
1319576: RNCC: 5 | RNVC: 9

10 Dec 2002

3040-01-503-2433
Shouldered Shaft

015032433
1319496: RNCC: 3 | RNVC: 2
4475305093: RNCC: 5 | RNVC: 9
1319496: RNCC: 5 | RNVC: 9

10 Dec 2002

3040-01-503-6469
Rigid Connecting Link

015036469
6623520: RNCC: 3 | RNVC: 2
6623520: RNCC: 5 | RNVC: 9

2 Jan 2003

3040-01-503-6475
Rigid Connecting Link

015036475
6623528: RNCC: 3 | RNVC: 2
6623528: RNCC: 5 | RNVC: 9

2 Jan 2003

3040-01-504-0627
Bell Crank

015040627
5-89512-3004: RNCC: 3 | RNVC: 2
5-89512-2003: RNCC: 5 | RNVC: 2
5-89512-3004: RNCC: 5 | RNVC: 2
5-89512-3004: RNCC: 5 | RNVC: 2
5-89512-3004: RNCC: 5 | RNVC: 2
5-89512-3004: RNCC: 5 | RNVC: 2
5-89512-3004: RNCC: 5 | RNVC: 2
5-89512-3004: RNCC: 5 | RNVC: 2
5-89512-3004: RNCC: 5 | RNVC: 2
5-89512-3004: RNCC: 5 | RNVC: 2

16 Jan 2003

3040-01-505-1961
Shouldered Shaft

015051961
L516175-305: RNCC: 3 | RNVC: 2

26 Feb 2003

3040-01-505-8464
Rigid Connecting Link

015058464
74A672428-2001: RNCC: 3 | RNVC: 2
74A672428-2001: RNCC: 5 | RNVC: 9
74A672428 REV B: RNCC: D | RNVC: 9

17 Mar 2003

3040-01-503-9141
Rigid Connecting Link

015039141
5-95690-37: RNCC: 3 | RNVC: 2
5-95690: RNCC: D | RNVC: 9

13 Jan 2003

3040-01-505-4119
Straight Shaft

015054119
9-64880-2: RNCC: 3 | RNVC: 2
9-64880: RNCC: 5 | RNVC: 9

6 Mar 2003

3040-01-505-8138
Rigid Connecting Link

015058138
IM-LPD-474T: RNCC: 3 | RNVC: 2
Q7924-03-R4 REF 10: RNCC: 5 | RNVC: 9

17 Mar 2003

3040-01-506-5548
Nonaircraft Mechanical Actuator

015065548
863-000209: RNCC: 3 | RNVC: 2
UT-1-DA: RNCC: 5 | RNVC: 2

2 Apr 2003

3040-01-507-5744
Linear Actuating Cylinder Head

015075744
596-7409215-3: RNCC: 3 | RNVC: 2
B434-2220-3: RNCC: 5 | RNVC: 2
7409215: RNCC: D | RNVC: 9

1 May 2003

3040-01-507-2349
Shouldered Shaft

015072349
38517-516 1706H: RNCC: 3 | RNVC: 2
93016B4302: RNCC: 5 | RNVC: 9
93016B4302: RNCC: D | RNVC: 9

23 Apr 2003

3040-01-509-9880
Rigid Connecting Link

015099880
518-4457096-27: RNCC: 3 | RNVC: 2
2013-54-27: RNCC: 5 | RNVC: 9
4457096: RNCC: D | RNVC: 9

10 Jul 2003

3040-01-510-0164
Fan Shaft

015100164
1048412: RNCC: 3 | RNVC: 2

10 Jul 2003

3040-01-510-0166
Shaft Power Take Off

015100166
1095385: RNCC: 3 | RNVC: 2
1036978: RNCC: 5 | RNVC: 9

10 Jul 2003

3040-01-512-3715
Linear Actuating Cylinder Assembly Parts Kit

015123715
SEF863 CRK-V: RNCC: 3 | RNVC: 9
SEF863-CK: RNCC: 5 | RNVC: 9

28 Aug 2003

3040-01-513-7651
Restraint Weldment

015137651
8036689: RNCC: 3 | RNVC: 2
D70127: RNCC: 5 | RNVC: 2
8036689: RNCC: 5 | RNVC: 9

6 Oct 2003

3040-01-514-0030
Push-Pull Control Assembly

015140030
CC63311: RNCC: 3 | RNVC: 2

14 Oct 2003

3040-01-515-1821
Grpr Bracket Assy

015151821
B434-5219-A2: RNCC: 3 | RNVC: 2
596-7410504-3: RNCC: 5 | RNVC: 2
B434-5217-3: RNCC: 5 | RNVC: 2
596-7410506-A2: RNCC: 7 | RNVC: 2
7410506: RNCC: D | RNVC: 9

18 Nov 2003

3040-01-515-2021
Shouldered Shaft

015152021
1KK214: RNCC: 3 | RNVC: 2
1KK214: RNCC: 3 | RNVC: 9
6506085: RNCC: 5 | RNVC: 9

18 Nov 2003

3040-01-515-2343
Worm Shaft

015152343
14205-151-000: RNCC: 3 | RNVC: 2
14100PL FIND NO. 19: RNCC: 5 | RNVC: 2

19 Nov 2003

3040-01-515-2908
Bell Crank

015152908
B4345219-9: RNCC: 3 | RNVC: 2
596-7410504-8: RNCC: 5 | RNVC: 2
B4345217-8: RNCC: 5 | RNVC: 2
596-7410506-9: RNCC: 7 | RNVC: 2
7410506: RNCC: D | RNVC: 9

20 Nov 2003

3040-01-516-1439
Nonaircraft Mechanical Actuator

015161439
13001763: RNCC: 3 | RNVC: 2

19 Dec 2003

3040-01-516-4798
Shouldered Shaft

015164798
596-7410365-6: RNCC: 3 | RNVC: 2
B434-8205-6: RNCC: 5 | RNVC: 2
B434-8213-1: RNCC: 5 | RNVC: 2
596-7410367-1: RNCC: 5 | RNVC: 2

8 Jan 2004

3040-01-516-6465
Shouldered Shaft

015166465
3637AS683-5: RNCC: 3 | RNVC: 2
3637AS683: RNCC: D | RNVC: 9

14 Jan 2004

3040-01-517-5618
Rigid Connecting Link

015175618
901-031-676-127: RNCC: 3 | RNVC: 2

12 Feb 2004

3040-01-518-2017
Brake Disc

015182017
PL76222 ITEM 12: RNCC: 3 | RNVC: 9
74329: RNCC: 5 | RNVC: 2

4 Mar 2004

3040-01-519-2208
Linear Actuating Cylinder Assembly

015192208
CYLM3010: RNCC: 3 | RNVC: 9
CYLM3010: RNCC: 5 | RNVC: 2

9 Apr 2004

3040-01-519-8798
Shaft Retaining Plate

015198798
29539045: RNCC: 3 | RNVC: 2
8HB357: RNCC: 5 | RNVC: 2
8HB357: RNCC: 5 | RNVC: 9

5 May 2004

3040-01-522-3447
Straight Shaft

015223447
K144: RNCC: 3 | RNVC: 2
PR2011-1PC35: RNCC: 5 | RNVC: 2

28 Jul 2004

3040-01-522-2123
Linear Actuating Cylinder Assembly

015222123
064 359: RNCC: 3 | RNVC: 2

22 Jul 2004

3040-01-522-9521
Shouldered Shaft

015229521
5165973-2: RNCC: 3 | RNVC: 2

14 Aug 2004

3040-01-523-0038
Mechanical Drive Housing

015230038
200317981-01: RNCC: 3 | RNVC: 9
200317981-01: RNCC: 5 | RNVC: 2
200317981: RNCC: D | RNVC: 9
8644600: RNCC: D | RNVC: 9

17 Aug 2004

3040-01-523-4616
Breather

015234616
197-9155: RNCC: 3 | RNVC: 2
197-9155: RNCC: 5 | RNVC: 2

3 Sep 2004

3040-01-524-3235
Rigid Connecting Link

015243235
123010: RNCC: 3 | RNVC: 2

29 Sep 2004

3040-01-524-7876
Linear Actuating Cylinder Assembly

015247876
055940.3: RNCC: 3 | RNVC: 2
055940.3: RNCC: 5 | RNVC: 9

18 Oct 2004

3040-01-491-5723
Flexible Shaft Assembly

014915723
22001-100 X 240IN: RNCC: 3 | RNVC: 2
22001-100 X 12FT 0IN: RNCC: 5 | RNVC: 2
B-409-22001-100: RNCC: 5 | RNVC: 9
22001: RNCC: D | RNVC: 9

25 Oct 2001

3040-01-484-7283
Acc Indicator Slide

014847283
556-7106781-1: RNCC: 3 | RNVC: 2
556-7106781-21: RNCC: 3 | RNVC: 9
H792-8111-1: RNCC: 5 | RNVC: 2
H792-8111-21: RNCC: 5 | RNVC: 2
H792-8111: RNCC: D | RNVC: 9
7106781: RNCC: D | RNVC: 9

7 May 2001

3040-01-486-0367
Bell Crank

014860367
122-5006519 PC 19: RNCC: 3 | RNVC: 2
122-5008311 PC 3: RNCC: 5 | RNVC: 2
122-5008312 PC: RNCC: C | RNVC: 1
5008311: RNCC: D | RNVC: 9
5006519: RNCC: D | RNVC: 9

18 Jun 2001

3040-01-495-0700
Friction Lining

014950700
12992247: RNCC: 1 | RNVC: 2
604001: RNCC: 3 | RNVC: 2

6 Mar 2002

3040-01-496-1890
Shouldered Shaft

014961890
581-6985420-8: RNCC: 3 | RNVC: 2
218033192: RNCC: 5 | RNVC: 2
H611-1404-8: RNCC: 5 | RNVC: 2
581-6985420: RNCC: D | RNVC: 9

5 Apr 2002

3040-01-496-8382
Linear Actuating Cylinder Head

014968382
526584: RNCC: 3 | RNVC: 2
PL86-75113CA7 FIG 37 REF19: RNCC: 5 | RNVC: 2
526584: RNCC: 5 | RNVC: 9

29 Apr 2002

3040-01-504-0608
Shouldered Shaft

015040608
596-7410507-17: RNCC: 3 | RNVC: 2
B434-5410-64: RNCC: 5 | RNVC: 2
B434-5412-17: RNCC: 5 | RNVC: 2
596-7410332-64: RNCC: 5 | RNVC: 2
7410507: RNCC: D | RNVC: 9
7410332: RNCC: D | RNVC: 9

16 Jan 2003

3040-01-504-3802
Linear Actuating Cylinder Piston Rod

015043802
8035552: RNCC: 3 | RNVC: 2
8035552: RNCC: 5 | RNVC: 9

28 Jan 2003

3040-01-504-8342
Worm Shaft

015048342
596-7410249-61: RNCC: 3 | RNVC: 2
B831-9511-61: RNCC: 5 | RNVC: 2
596-7410249: RNCC: D | RNVC: 9

11 Feb 2003

3040-01-370-2967
Rigid Connecting Link

013702967
1864220 W: RNCC: 3 | RNVC: 2
1864220 W: RNCC: 5 | RNVC: 9

17 Jan 1993

3040-01-370-5511
Control Cam

013705511
123-6225708 PC 60: RNCC: 3 | RNVC: 2
6225708 PC 60: RNCC: 5 | RNVC: 2
6225708: RNCC: D | RNVC: 9

24 Jan 1993

3040-01-370-2849
Shouldered Shaft

013702849
9170424-01: RNCC: 3 | RNVC: 2
9170424-01: RNCC: 5 | RNVC: 9
9170424: RNCC: 5 | RNVC: 9
9170424: RNCC: D | RNVC: 9

17 Jan 1993

3040-01-372-1486
Control Cam

013721486
12417905: RNCC: 3 | RNVC: 2
12417905: RNCC: 5 | RNVC: 2
12417905: RNCC: 5 | RNVC: 2
12417905: RNCC: 5 | RNVC: 2

3 Mar 1993

3040-01-372-4960
Straight Shaft

013724960
9-557-010438: RNCC: 3 | RNVC: 2
9-557-010438: RNCC: 5 | RNVC: 2
9-557-010438: RNCC: 5 | RNVC: 2

11 Mar 1993

3040-01-372-8157
Manual Control Lever

013728157
2HL483: RNCC: 3 | RNVC: 2
BLR 4199: RNCC: 3 | RNVC: 9
2HL483: RNCC: 5 | RNVC: 9

19 Mar 1993

3040-01-374-0204
Push-Pull Control Assembly

013740204
56L32-2-88: RNCC: 3 | RNVC: 2
56L32-2-88: RNCC: 3 | RNVC: 9
56L-32-2-88: RNCC: 5 | RNVC: 2
22526-000-00: RNCC: 5 | RNVC: 9

14 Apr 1993

3040-01-373-1825
Shaft Collar

013731825
211036919: RNCC: 3 | RNVC: 1
563-6404328 FIND 25: RNCC: 5 | RNVC: 1
DF6002-413 FIND 25: RNCC: 5 | RNVC: 1

30 Mar 1993

3040-01-374-2095
Remote Control Lever

013742095
12389438: RNCC: 3 | RNVC: 2
12389438: RNCC: 5 | RNVC: 2

17 Apr 1993

3040-01-374-7873
Shouldered Shaft

013747873
65005-00: RNCC: 3 | RNVC: 2
POD-65107 ITEM 5: RNCC: 5 | RNVC: 2
POD-65005: RNCC: 5 | RNVC: 2
65005: RNCC: 5 | RNVC: 9
POD-65107: RNCC: D | RNVC: 9

29 Apr 1993

3040-01-375-7325
Mechanical Drive Housing

013757325
12415300: RNCC: 1 | RNVC: 2
603 0216: RNCC: 3 | RNVC: 2
603 0216: RNCC: 5 | RNVC: 2
12415300: RNCC: 5 | RNVC: 9
115380510040: RNCC: 5 | RNVC: 9
12415300: RNCC: 5 | RNVC: 9

20 May 1993

3040-01-376-1186
Spur Gearshaft

013761186
42315-59: RNCC: 3 | RNVC: 2
42315-59: RNCC: 3 | RNVC: 9
42315-59: RNCC: 5 | RNVC: 9

27 May 1993

3040-01-376-7151
Linear Actuating Cylinder Assembly

013767151
1378AS290-1: RNCC: 3 | RNVC: 2
A-82001: RNCC: 3 | RNVC: 9
1378AS290-1: RNCC: 7 | RNVC: 2

7 Jun 1993

3040-01-376-7163
Spur Gearshaft

013767163
512-6404653-5: RNCC: 3 | RNVC: 2
512-6404652-60: RNCC: 5 | RNVC: 2

7 Jun 1993

3040-01-376-7164
Spur Gearshaft

013767164
512-6404653-6: RNCC: 3 | RNVC: 2
512-6404652-61: RNCC: 5 | RNVC: 2

7 Jun 1993

3040-01-377-7072
Nonaircraft Mechanical Actuator

013777072
42484: RNCC: 3 | RNVC: 2
010-9039-H ITEM 27: RNCC: 5 | RNVC: 2

23 Jul 1993

3040-01-377-7534
Straight Shaft

013777534
6086342: RNCC: 3 | RNVC: 2

24 Jul 1993

3040-01-378-3945
Pawl

013783945
11593696-1: RNCC: 3 | RNVC: 2
11593696: RNCC: D | RNVC: 9

12 Aug 1993

3040-01-378-9379
Shouldered Shaft

013789379
22440: RNCC: 3 | RNVC: 2

25 Aug 1993

3040-01-379-8757
Drive S A Shaft

013798757
887512: RNCC: 3 | RNVC: 2

9 Sep 1993

3040-01-378-5387
Manual Control Lever

013785387
334814: RNCC: 3 | RNVC: 2
ZB0334814: RNCC: 5 | RNVC: 2
334814: RNCC: 5 | RNVC: 9
334814: RNCC: C | RNVC: 1

21 Aug 1993

3040-01-381-0197
Counterbalance Weight

013810197
265353801: RNCC: 3 | RNVC: 2
26535301: RNCC: 5 | RNVC: 2
2650-3240 ITEM 53: RNCC: 5 | RNVC: 9
2650-3245 ITEM 53: RNCC: 5 | RNVC: 9
265353801: RNCC: 5 | RNVC: 9
2650-3538: RNCC: 5 | RNVC: 9
265353801: RNCC: C | RNVC: 1

5 Oct 1993

3040-01-378-6677
Nonaircraft Mechanical Actuator

013786677
DZ 243: RNCC: 3 | RNVC: 2
E13044S-11: RNCC: 5 | RNVC: 2
E13044S: RNCC: D | RNVC: 9

21 Aug 1993

3040-01-383-5071
Breather

013835071
81947-001: RNCC: 3 | RNVC: 9
LA-81947-001: RNCC: 5 | RNVC: 9
200865 PIECE 21.43: RNCC: 5 | RNVC: 9
LA-81947: RNCC: 5 | RNVC: 9
81947-001: RNCC: C | RNVC: 1
81947-001: RNCC: C | RNVC: 1
200865: RNCC: D | RNVC: 9

25 Nov 1993

3040-01-383-5379
Rigid Connecting Link

013835379
870318381: RNCC: 3 | RNVC: 2

25 Nov 1993

3040-01-383-5194
Linear Actuating Cylinder Piston

013835194
101C315BRG-2: RNCC: 3 | RNVC: 2
101C315BRG-2: RNCC: 3 | RNVC: 9
509E211RY-100: RNCC: 5 | RNVC: 9
101C315BRG-2: RNCC: 5 | RNVC: 9
101C315BRG-2: RNCC: C | RNVC: 1
101C315BF-2: RNCC: D | RNVC: 9

25 Nov 1993

3040-01-387-9516
Mechanical Drive Housing

013879516
7709089: RNCC: 3 | RNVC: 2

16 Mar 1994

3040-01-387-7233
Flexible Shaft Assembly Core

013877233
57353-51: RNCC: 3 | RNVC: 2

10 Mar 1994

3040-01-389-7019
Spline Adapter

013897019
50731: RNCC: 3 | RNVC: 2
12414373: RNCC: 5 | RNVC: 2
50731: RNCC: 5 | RNVC: 9
12414373: RNCC: 5 | RNVC: 9
12414373: RNCC: 7 | RNVC: 2

29 Apr 1994

3040-01-390-3657
Disk Brake Shoe

013903657
407-53319-1: RNCC: 3 | RNVC: 2

17 May 1994

3040-01-385-9171
Shouldered Shaft

013859171
02-3241-01: RNCC: 3 | RNVC: 2

21 Jan 1994

3040-01-391-3283
Push-Pull Control Assembly

013913283
1604940-002: RNCC: 3 | RNVC: 2
2101201 ITEM 1604940-002: RNCC: 5 | RNVC: 2
2101210: RNCC: D | RNVC: 9

8 Jun 1994

3040-01-391-3286
Push-Pull Control Assembly

013913286
1604940-001: RNCC: 3 | RNVC: 2
2101210 ASSY 1604940-001: RNCC: 5 | RNVC: 2
2101210: RNCC: D | RNVC: 9

8 Jun 1994

3040-01-386-6617
Counterbalance Weight

013866617
236B2275-P004: RNCC: 3 | RNVC: 9
236B2275-P004: RNCC: 5 | RNVC: 9
963E44 ITEM 55: RNCC: 5 | RNVC: 9
236B2275-P004: RNCC: C | RNVC: 1
963E440: RNCC: D | RNVC: 9

10 Feb 1994

3040-01-391-6438
Linear Actuating Cylinder Assembly Parts Kit

013916438
MVG12-1132: RNCC: 3 | RNVC: 2

15 Jun 1994

3040-01-386-6662
Counterbalance Weight

013866662
236B2275-P002: RNCC: 3 | RNVC: 9
236B2275-P002: RNCC: 5 | RNVC: 9
963E440 ITEM 53: RNCC: 5 | RNVC: 9
236B2275-P002: RNCC: C | RNVC: 1
963E440: RNCC: D | RNVC: 9

10 Feb 1994

3040-01-387-7055
Shouldered Shaft

013877055
12419037: RNCC: 3 | RNVC: 2
12419037: RNCC: 5 | RNVC: 1
12419037: RNCC: 5 | RNVC: 2
12419037: RNCC: 5 | RNVC: 2
12419037: RNCC: 5 | RNVC: 2
12419037: RNCC: 5 | RNVC: 9

10 Mar 1994

3040-01-387-7217
Manual Control Lever

013877217
12389411: RNCC: 3 | RNVC: 2

10 Mar 1994

3040-01-395-2239
Shouldered Shaft

013952239
80027-2: RNCC: 3 | RNVC: 2
40011 ITEM NO 12: RNCC: 5 | RNVC: 2
80027-1: RNCC: 5 | RNVC: 9
40011: RNCC: D | RNVC: 9

25 Aug 1994

3040-01-399-0911
Helical Gear And Shaft Assembly

013990911
80056-2: RNCC: 3 | RNVC: 2
80056-1: RNCC: 3 | RNVC: 2
80056 ASSY 1: RNCC: 5 | RNVC: 9
40074 ITEM NO 12: RNCC: 5 | RNVC: 9
80056: RNCC: 5 | RNVC: 9
40074: RNCC: D | RNVC: 9

16 Nov 1994

3040-01-398-8392
Counterbalance Weight

013988392
1A7588CL2: RNCC: 3 | RNVC: 2

9 Nov 1994

3040-01-399-8491
Inertia Damper

013998491
504: RNCC: 3 | RNVC: 2

6 Dec 1994

3040-01-399-6873
Shouldered Shaft

013996873
25-46793-1: RNCC: 3 | RNVC: 2

2 Dec 1994

3040-01-400-6082
Remote Control Lever

014006082
ED00495R0150-S: RNCC: 3 | RNVC: 2
49507: RNCC: 5 | RNVC: 9
7749515: RNCC: 5 | RNVC: 9
7749507: RNCC: 5 | RNVC: 9

16 Dec 1994

3040-01-406-4727
Straight Shaft

014064727
066202: RNCC: 3 | RNVC: 2
993B066202: RNCC: 5 | RNVC: 9

5 Jan 1995

3040-01-406-8765
Linear Actuating Cylinder Piston

014068765
204807: RNCC: 3 | RNVC: 2
204807: RNCC: 5 | RNVC: 2
204807: RNCC: 5 | RNVC: 2

13 Jan 1995

3040-01-407-1017
Rigid Connecting Link

014071017
6098152: RNCC: 3 | RNVC: 2

20 Jan 1995

3040-01-408-1586
Push-Pull Control Assembly

014081586
18505901: RNCC: 3 | RNVC: 2
55-8311-2108: RNCC: 3 | RNVC: 9
5749932-013: RNCC: 5 | RNVC: 2
7-44347-13: RNCC: 5 | RNVC: 9

10 Feb 1995

3040-01-411-0668
Piston Ring

014110668
3791607: RNCC: 3 | RNVC: 9
3791607: RNCC: 5 | RNVC: 2
5HS309: RNCC: 5 | RNVC: 2
5HS309: RNCC: 5 | RNVC: 9

16 Mar 1995

3040-01-410-9965
Remote Control Lever Assembly

014109965
12447182: RNCC: 1 | RNVC: 2
12447182: RNCC: 3 | RNVC: 2
6003172: RNCC: 5 | RNVC: 9
52826: RNCC: 5 | RNVC: 9
000-52826-0001: RNCC: 5 | RNVC: 9
52826-1: RNCC: 5 | RNVC: 9
3040PL1944671: RNCC: 6 | RNVC: 9

16 Mar 1995

3040-01-411-0675
Rigid Connecting Link

014110675
12365428: RNCC: 3 | RNVC: 2
12365428: RNCC: 5 | RNVC: 2
12365428: RNCC: 5 | RNVC: 2

16 Mar 1995

3040-01-411-3344
Straight Shaft

014113344
184080-1: RNCC: 3 | RNVC: 2
184080-1: RNCC: 5 | RNVC: 2
184080-14: RNCC: 5 | RNVC: 9

22 Mar 1995

3040-01-412-1660
Rigid Connecting Link

014121660
12448997-1: RNCC: 3 | RNVC: 2
GS 4080: RNCC: 5 | RNVC: 2

12 Apr 1995

3040-01-411-4191
Rigid Connecting Link

014114191
12460124: RNCC: 3 | RNVC: 2
12460124: RNCC: 5 | RNVC: 2

24 Mar 1995

3040-01-411-4238
Mechanical Drive Housing

014114238
903-5912046PC17: RNCC: 3 | RNVC: 2
903-5912046PC17: RNCC: 5 | RNVC: 9
903-5912046: RNCC: D | RNVC: 9

24 Mar 1995

3040-01-412-1661
Rigid Connecting Link

014121661
RCSK16761: RNCC: 3 | RNVC: 2
12448997-2: RNCC: 3 | RNVC: 2
GS 4081: RNCC: 5 | RNVC: 2

12 Apr 1995

3040-01-416-3341
Manual Control Lever Assembly

014163341
714650-61500: RNCC: 3 | RNVC: 9
714650-61500: RNCC: 5 | RNVC: 2
714650-61500: RNCC: 5 | RNVC: 9
3040PL0807276: RNCC: 6 | RNVC: 9
714650-61500: RNCC: C | RNVC: 1

17 Jul 1995

3040-01-415-4382
Straight Shaft

014154382
55244-61-1: RNCC: 3 | RNVC: 2
OV2G55244-W3C ITEM 11: RNCC: 5 | RNVC: 2
OV2G55244-WC-11: RNCC: 5 | RNVC: 2
OV2G55244-W3C: RNCC: D | RNVC: 9

27 Jun 1995

3040-01-412-8153
Linear Actuating Cylinder Assembly

014128153
SW94-01: RNCC: 3 | RNVC: 9

28 Apr 1995

3040-01-413-2618
Rigid Connecting Link

014132618
LS778B36B: RNCC: 3 | RNVC: 2
6778-B-36-B: RNCC: 5 | RNVC: 2

10 May 1995

3040-01-416-8534
Linear Actuating Cylinder Assembly

014168534
12356930: RNCC: 3 | RNVC: 2
12356930: RNCC: 5 | RNVC: 2

26 Jul 1995

3040-01-413-8648
Remote Control Lever

014138648
024767A: RNCC: 3 | RNVC: 2

24 May 1995

3040-01-414-0402
Straight Shaft

014140402
31111: RNCC: 3 | RNVC: 2

30 May 1995

3040-01-414-4104
Linear Actuating Cylinder Piston Rod

014144104
21202-1000-1: RNCC: 3 | RNVC: 2
21202-5: RNCC: 5 | RNVC: 9
21202-1000: RNCC: 5 | RNVC: 9
21202: RNCC: D | RNVC: 9

7 Jun 1995

3040-01-419-0546
Linear Actuating Cylinder Piston Rod

014190546
3253511-1: RNCC: 3 | RNVC: 2
3798357 FIND NO 2: RNCC: 5 | RNVC: 2
3798357: RNCC: D | RNVC: 9

12 Sep 1995

3040-01-419-1681
Shouldered Shaft

014191681
52012-1000-1: RNCC: 3 | RNVC: 2
52125 FN 15: RNCC: C | RNVC: 1
52012-1000: RNCC: D | RNVC: 9

14 Sep 1995

3040-01-419-3589
Manual Control Lever

014193589
12364891: RNCC: 3 | RNVC: 2
12364891: RNCC: 5 | RNVC: 2
12364891: RNCC: 5 | RNVC: 2
12364891: RNCC: 5 | RNVC: 2

20 Sep 1995

3040-01-420-5226
Piston Ring

014205226
EY-3069U PC-8: RNCC: 3 | RNVC: 9
EY-3069U PC-8: RNCC: 5 | RNVC: 9
EY-3069U PC-8: RNCC: 5 | RNVC: 9
EY-3069U PC-8: RNCC: C | RNVC: 1

19 Oct 1995

3040-01-420-9003
Piston Rod Guide

014209003
070012: RNCC: 3 | RNVC: 2
60087-050: RNCC: 5 | RNVC: 9
070012: RNCC: 5 | RNVC: 9
60087-050: RNCC: 5 | RNVC: 9
070012: RNCC: C | RNVC: 1

27 Oct 1995

3040-01-423-1996
Straight Shaft

014231996
A-18694: RNCC: 3 | RNVC: 2
10-1506-100 ITEM NO 47: RNCC: 5 | RNVC: 9
10-1506-100: RNCC: D | RNVC: 9

18 Dec 1995

3040-01-424-0863
Linear Actuating Cylinder Piston

014240863
R939002871: RNCC: 3 | RNVC: 2
2780981-001: RNCC: 3 | RNVC: 9
1781301-802 IT 004: RNCC: 5 | RNVC: 2
2780981-001: RNCC: 5 | RNVC: 2
1781301-802 IT 004: RNCC: 5 | RNVC: 9
278 0081-001: RNCC: C | RNVC: 1
1781301-802: RNCC: D | RNVC: 9

19 Jan 1996

3040-01-432-4483
Mechanical Drive Housing

014324483
90-004-1194: RNCC: 3 | RNVC: 2

6 Jun 1996

3040-01-432-7325
Linear Actuating Cylinder Assembly

014327325
61650-080109: RNCC: 3 | RNVC: 2
3070AS531-1: RNCC: 7 | RNVC: 2

13 Jun 1996

3040-01-432-9479
Linear Actuating Cylinder Assembly Parts Kit

014329479
SML-41555: RNCC: 3 | RNVC: 2

18 Jun 1996

3040-01-433-2556
Brake Lining Kit

014332556
12-501-306: RNCC: 3 | RNVC: 2

25 Jun 1996

3040-01-433-8243
Rigid Connecting Link

014338243
6406847 FIND NO.13: RNCC: 3 | RNVC: 2
211049415: RNCC: 5 | RNVC: 2
6406847 FIND NO.13: RNCC: 5 | RNVC: 2
211049415: RNCC: 5 | RNVC: 2
752-6406847-13: RNCC: 5 | RNVC: 2
DF1706-433 FN13: RNCC: 5 | RNVC: 9
6406847: RNCC: D | RNVC: 9

11 Jul 1996

3040-01-432-7302
Grease Cap

014327302
3262-Y-389: RNCC: 3 | RNVC: 2

13 Jun 1996

3040-01-434-7407
Linear Actuating Cylinder Assembly

014347407
2037392: RNCC: 3 | RNVC: 2
2037392: RNCC: 5 | RNVC: 9
2014712: RNCC: 5 | RNVC: 9

6 Aug 1996

3040-01-435-0798
Straight Shaft

014350798
1-180-139-02: RNCC: 3 | RNVC: 2

13 Aug 1996

3040-01-424-9867
Linear Actuating Cylinder Assembly

014249867
1 1/8 CLH-D-2: RNCC: 3 | RNVC: 2
150009: RNCC: 3 | RNVC: 2
H677N001 FIND NO. 170: RNCC: 5 | RNVC: 2
H677N001: RNCC: D | RNVC: 9

8 Feb 1996

3040-01-424-6154
Manual Control Lever

014246154
A48659-1MFV: RNCC: 3 | RNVC: 2
D9500 ITEM 20: RNCC: 5 | RNVC: 2

1 Feb 1996

3040-01-425-3697
Push-Pull Control Assembly

014253697
AC824-03: RNCC: 3 | RNVC: 2
MC824-03: RNCC: 3 | RNVC: 9

20 Feb 1996

3040-01-425-4860
Spline Adapter

014254860
423DS100-1: RNCC: 1 | RNVC: 2
A11024: RNCC: 3 | RNVC: 2

22 Feb 1996

3040-01-426-4064
Straight Shaft Assembly

014264064
3141AS452-1: RNCC: 3 | RNVC: 2
3141AS452-1: RNCC: 5 | RNVC: 9
3141AS452-1: RNCC: C | RNVC: 1

12 Mar 1996

3040-01-426-0960
Bevel Gear And Shaft Assembly

014260960
512-3032: RNCC: 3 | RNVC: 2
9Y9348: RNCC: 5 | RNVC: 9

4 Mar 1996

3040-01-428-2247
Brake Backing Plate

014282247
LOC155078: RNCC: 3 | RNVC: 2
EX155078: RNCC: 3 | RNVC: 2
EX155078: RNCC: 5 | RNVC: 9

22 Mar 1996

3040-01-428-5730
Control Cam

014285730
029303-1: RNCC: 3 | RNVC: 2
029303-1: RNCC: 5 | RNVC: 9

28 Mar 1996

3040-01-428-5745
Shouldered Shaft

014285745
029567-1: RNCC: 3 | RNVC: 2
029567-1: RNCC: 5 | RNVC: 9
3040PL0669743: RNCC: 6 | RNVC: 9

28 Mar 1996

3040-01-428-6869
Linear Actuating Cylinder Assembly

014286869
241.33-R-V: RNCC: 3 | RNVC: 9
9Y5541: RNCC: D | RNVC: 9

29 Mar 1996

3040-01-428-6381
Bevel Gearshaft

014286381
H54310006: RNCC: 3 | RNVC: 2
H54310006: RNCC: 3 | RNVC: 9
H54310006: RNCC: 5 | RNVC: 9
A31170014 ITEM 33: RNCC: 5 | RNVC: 9
T001224379: RNCC: C | RNVC: 1

28 Mar 1996

3040-01-429-4302
Shouldered Shaft

014294302
210119: RNCC: 3 | RNVC: 2
7W-1467: RNCC: 5 | RNVC: 2

10 Apr 1996

3040-01-429-7904
Straight Axle

014297904
7C-8854: RNCC: 3 | RNVC: 2
7C-8854: RNCC: 5 | RNVC: 2
7C-8854: RNCC: 5 | RNVC: 2
10322235: RNCC: 6 | RNVC: 9

18 Apr 1996

3040-01-429-8345
Rigid Connecting Link

014298345
12420770: RNCC: 3 | RNVC: 2
12420770: RNCC: 5 | RNVC: 2
PP941900: RNCC: 5 | RNVC: 9
12420770: RNCC: 7 | RNVC: 2

19 Apr 1996

3040-01-430-3937
Body Hub

014303937
68514454764: RNCC: 3 | RNVC: 9

29 Apr 1996

3040-01-436-7086
Counterbalance Weight

014367086
2196853CLE: RNCC: 3 | RNVC: 2

26 Sep 1996

3040-01-437-0827
Shouldered Shaft

014370827
026149-1: RNCC: 3 | RNVC: 2
026149-1: RNCC: 5 | RNVC: 9
026149-1: RNCC: C | RNVC: 1
026149: RNCC: D | RNVC: 9

4 Oct 1996

3040-01-437-4641
Rigid Connecting Link

014374641
029208-1: RNCC: 3 | RNVC: 2
029208-1: RNCC: 5 | RNVC: 9
029208-1: RNCC: C | RNVC: 1

15 Oct 1996

3040-01-438-1471
Shouldered Shaft

014381471
211094741: RNCC: 3 | RNVC: 2
801-6406709 FIND NO. 87: RNCC: 5 | RNVC: 2
801-6406709-87: RNCC: 5 | RNVC: 2
DF331106 FN 87: RNCC: 5 | RNVC: 9
6406709: RNCC: D | RNVC: 9

31 Oct 1996

3040-01-438-1888
Rigid Connecting Link

014381888
3V-9399: RNCC: 3 | RNVC: 2

1 Nov 1996

3040-01-438-8783
Push-Pull Cable Assembly

014388783
211056402: RNCC: 3 | RNVC: 2
211056403: RNCC: 5 | RNVC: 9
595-6401090 ITEM 8: RNCC: D | RNVC: 9
6401090: RNCC: D | RNVC: 9

21 Nov 1996

3040-01-439-2001
Straight Shaft

014392001
6616543: RNCC: 3 | RNVC: 2
6616543: RNCC: 5 | RNVC: 9

2 Dec 1996

3040-01-439-5046
Nonrotating Shaft Eye Bracket

014395046
23051356: RNCC: 3 | RNVC: 2
23059004 ITEM 3: RNCC: 5 | RNVC: 2
23059004 ITEM 3: RNCC: 5 | RNVC: 9
23051356: RNCC: 5 | RNVC: 9
23059004: RNCC: D | RNVC: 9

10 Dec 1996

3040-01-440-3148
Remote Control Lever

014403148
029205-1: RNCC: 3 | RNVC: 2
029205-1: RNCC: 5 | RNVC: 9
029205-1: RNCC: C | RNVC: 1
029205: RNCC: D | RNVC: 9

10 Jan 1997

3040-01-446-1284
Rigid Connecting Link

014461284
L5202051-001: RNCC: 3 | RNVC: 2

23 Jun 1997

3040-01-446-1588
Shouldered Shaft

014461588
12591302: RNCC: 3 | RNVC: 2

24 Jun 1997

3040-01-446-7606
Linear Actuating Cylinder Assembly

014467606
12466272: RNCC: 3 | RNVC: 2

16 Jul 1997

3040-01-446-9970
Shouldered Shaft

014469970
65391-11328-101: RNCC: 3 | RNVC: 2
65391-11328: RNCC: D | RNVC: 9

23 Jul 1997

3040-01-446-6857
Wheel Pulse

014466857
23513010: RNCC: 3 | RNVC: 2
6HR237: RNCC: 5 | RNVC: 2
6HR237: RNCC: 5 | RNVC: 9

14 Jul 1997

3040-01-447-3035
Cargo D Dog Spindle

014473035
56W44-SK8504 PC 19: RNCC: 3 | RNVC: 2
56W44-SK8504: RNCC: D | RNVC: 9

1 Aug 1997

3040-01-448-8162
Shouldered Shaft

014488162
941C563H01: RNCC: 3 | RNVC: 2
1395F01G01PC12: RNCC: 5 | RNVC: 2
941C563: RNCC: D | RNVC: 9

10 Sep 1997

3040-01-449-3608
Shouldered Shaft

014493608
42251-43: RNCC: 3 | RNVC: 2
42251C43: RNCC: 3 | RNVC: 9

29 Sep 1997

3040-01-450-7820
Bell Crank

014507820
8100-1251-0192 PC 148: RNCC: 3 | RNVC: 2
8100-1251-0285 PT NO 61: RNCC: C | RNVC: 1

21 Nov 1997

3040-01-451-2405
Mechanically Actuated Spindle

014512405
8100-1251-0192 PC 50: RNCC: 3 | RNVC: 2
8100-1251-0192 PC 50: RNCC: 5 | RNVC: 2
8100-1251-0192 PC 50: RNCC: 5 | RNVC: 9
8100-1251-0285 PT NO 15: RNCC: C | RNVC: 1
8100-1251-0192: RNCC: D | RNVC: 9

10 Dec 1997

3040-01-452-0223
Steering Gear Rod

014520223
C621-0104: RNCC: 3 | RNVC: 9
566-6405736-SGMF-C6: RNCC: 5 | RNVC: 2
C621-0104-SGMF-C6: RNCC: 5 | RNVC: 2
6405736-C6: RNCC: 5 | RNVC: 2
566-6405736: RNCC: D | RNVC: 9

13 Jan 1998

3040-01-453-5581
Control Cam

014535581
845-4457605 PC 43: RNCC: 3 | RNVC: 2
4457605: RNCC: D | RNVC: 9

4 Mar 1998

3040-01-453-8635
Shaft Collar

014538635
13581: RNCC: 3 | RNVC: 2
13581: RNCC: 5 | RNVC: 2
A6210603: RNCC: 5 | RNVC: 2

12 Mar 1998

3040-01-454-2310
Push-Pull Control Assembly

014542310
C1615Z-40 FT: RNCC: 3 | RNVC: 2
C1615Z: RNCC: D | RNVC: 9

24 Mar 1998

3040-01-454-5003
Shouldered Shaft

014545003
5-315442-00: RNCC: 3 | RNVC: 9
5-315442-00: RNCC: 5 | RNVC: 2
5-315442-00: RNCC: 5 | RNVC: 9

2 Apr 1998

3040-01-455-2629
Straight Shaft Assembly

014552629
2741164-1-1: RNCC: 3 | RNVC: 2
74-660056-211: RNCC: 5 | RNVC: 9

27 Apr 1998

3040-01-456-1719
Counterbalance Weight

014561719
9601400-10: RNCC: 3 | RNVC: 2
960400-10: RNCC: 5 | RNVC: 9

3 Jun 1998

3040-01-387-7257
Flexible Shaft Assembly Core

013877257
57353-103: RNCC: 3 | RNVC: 2

10 Mar 1994

3040-01-383-5297
Shouldered Shaft

013835297
803-5184129 PIECE 75: RNCC: 3 | RNVC: 2
5184129 PIECE 75: RNCC: 5 | RNVC: 2
3040PL1287513: RNCC: 6 | RNVC: 9
5184129: RNCC: D | RNVC: 9

25 Nov 1993

3040-01-383-6807
Shouldered Shaft

013836807
3930AS680: RNCC: 3 | RNVC: 2
74A733031-2003: RNCC: 5 | RNVC: 9
74A733031-2001: RNCC: 5 | RNVC: 9
3930AS680: RNCC: C | RNVC: 1

30 Nov 1993

3040-01-385-7115
Shouldered Shaft Assembly

013857115
357069-5: RNCC: 3 | RNVC: 2

16 Jan 1994

3040-01-392-2468
Shouldered Shaft Assembly

013922468
80053-1: RNCC: 3 | RNVC: 2
80063-1: RNCC: 5 | RNVC: 9
20002 ITEM NO.6: RNCC: 5 | RNVC: 9
80053: RNCC: D | RNVC: 9

26 Jun 1994

3040-01-393-5854
Shouldered Shaft

013935854
58200-02: RNCC: 3 | RNVC: 2
58202 ITEM 2: RNCC: 5 | RNVC: 2
58200-2: RNCC: 5 | RNVC: 9
58202: RNCC: D | RNVC: 9

22 Jul 1994

3040-01-393-7529
Linear Actuating Cylinder Assembly

013937529
8D00145-1: RNCC: 3 | RNVC: 2
8D00145-1: RNCC: 5 | RNVC: 9
8D00145: RNCC: D | RNVC: 9

26 Jul 1994

3040-01-412-6796
Control Cam

014126796
109303-1: RNCC: 3 | RNVC: 2
109303-1: RNCC: 5 | RNVC: 9

26 Apr 1995

3040-01-412-2698
Piston Rod Guide

014122698
21105-1011-1: RNCC: 3 | RNVC: 2
21105-46: RNCC: 5 | RNVC: 9
21105 FIND 46: RNCC: 5 | RNVC: 9
21105-1011: RNCC: 5 | RNVC: 9
21837 FIND 28: RNCC: C | RNVC: 1

14 Apr 1995

3040-01-415-4984
Block Brake

014154984
DEDE315: RNCC: 3 | RNVC: 2
BEEBE ITEM 3: RNCC: 5 | RNVC: 9
BEEBE315: RNCC: 5 | RNVC: 9

28 Jun 1995

3040-01-415-4380
Grease Cap

014154380
20-20: RNCC: 3 | RNVC: 2
OV2G55244-W3C DET 2: RNCC: 5 | RNVC: 2
OV2G55244-W3C: RNCC: D | RNVC: 9

27 Jun 1995

3040-01-413-4022
Straight Shaft

014134022
21065: RNCC: 3 | RNVC: 2
5714228: RNCC: 5 | RNVC: 2
5714228: RNCC: 5 | RNVC: 2
5719228: RNCC: 5 | RNVC: 9
5719228: RNCC: 5 | RNVC: 9
3040PL0767543: RNCC: 6 | RNVC: 9

12 May 1995

3040-01-417-6733
Shouldered Shaft

014176733
21191-1001-1: RNCC: 3 | RNVC: 2
21191-7: RNCC: 5 | RNVC: 9

11 Aug 1995

3040-01-417-8459
Piston Rod Guide

014178459
21302-1002-1: RNCC: 3 | RNVC: 2
21302-7: RNCC: 5 | RNVC: 9
21302-1002: RNCC: 5 | RNVC: 9
21302: RNCC: D | RNVC: 9

16 Aug 1995

3040-01-418-6463
Mechanical Drive Housing

014186463
6289137: RNCC: 3 | RNVC: 2

31 Aug 1995

3040-01-436-3854
Spur Gearshaft

014363854
528294: RNCC: 3 | RNVC: 2
SH-10254 PC31: RNCC: 3 | RNVC: 2
SH10254: RNCC: 3 | RNVC: 2
528294: RNCC: 3 | RNVC: 9
SH-10254 PC31: RNCC: 5 | RNVC: 9
528294: RNCC: C | RNVC: 1
SH10254: RNCC: D | RNVC: 9

18 Sep 1996

3040-01-436-4165
Linear Actuating Cylinder Assembly

014364165
TH4007424PA-00: RNCC: 3 | RNVC: 2
1741AS316-1: RNCC: 3 | RNVC: 2
1741AS316-1: RNCC: 5 | RNVC: 9
1741AS316-1: RNCC: 7 | RNVC: 2

19 Sep 1996

3040-01-436-8306
Shouldered Shaft

014368306
1S-5162 ITEM 108: RNCC: 3 | RNVC: 2
1S-5162: RNCC: D | RNVC: 9

27 Sep 1996

3040-01-436-6203
Straight Shaft

014366203
029256-1: RNCC: 3 | RNVC: 2
029256-1: RNCC: 5 | RNVC: 9
029256-1: RNCC: C | RNVC: 1
029256: RNCC: D | RNVC: 9

24 Sep 1996

3040-01-444-5652
Shouldered Shaft

014445652
901-062-213-101: RNCC: 3 | RNVC: 2

12 May 1997

3040-01-445-9032
Pawl

014459032
400105-1: RNCC: 3 | RNVC: 2
400105: RNCC: D | RNVC: 9

17 Jun 1997

3040-01-412-9588
Shouldered Shaft

014129588
36-155-053: RNCC: 3 | RNVC: 2
1023-02-D P 4: RNCC: 5 | RNVC: 2
1023-02-D: RNCC: D | RNVC: 9

3 May 1995

3040-01-455-0220
Shouldered Shaft

014550220
7578973-001: RNCC: 3 | RNVC: 2
7578973-001: RNCC: 3 | RNVC: 2
7578973-001: RNCC: 5 | RNVC: 9

20 Apr 1998

3040-01-455-3284
Bell Crank

014553284
L43567G02: RNCC: 3 | RNVC: 2

29 Apr 1998

3040-01-456-4507
Rigid Connecting Link

014564507
12524578: RNCC: 3 | RNVC: 2

12 Jun 1998

3040-01-456-7403
Shouldered Shaft

014567403
7579753-021: RNCC: 3 | RNVC: 2
7579753-021: RNCC: 5 | RNVC: 2
7579753-021: RNCC: 5 | RNVC: 2

24 Jun 1998

3040-01-369-9150
Shouldered Axle

013699150
368346-1: RNCC: 3 | RNVC: 9
368346-1: RNCC: 5 | RNVC: 2
368346: RNCC: D | RNVC: 9

8 Jan 1993

3040-01-370-5463
Counterbalance Weight

013705463
8909-190-001: RNCC: 3 | RNVC: 2

24 Jan 1993

3040-01-371-7854
Rigid Connecting Link

013717854
SW33301: RNCC: 3 | RNVC: 2

23 Feb 1993

3040-01-372-0066
Linear Actuating Cylinder Assembly

013720066
55504: RNCC: 3 | RNVC: 2
55504: RNCC: 3 | RNVC: 2
55504: RNCC: 3 | RNVC: 9
55504: RNCC: 5 | RNVC: 2

27 Feb 1993

3040-01-372-4235
Rigid Connecting Link

013724235
209-062-759-109: RNCC: 3 | RNVC: 2

10 Mar 1993

3040-01-372-3488
Rigid Connecting Link

013723488
94042-991: RNCC: 3 | RNVC: 9
4538741-386: RNCC: 5 | RNVC: 2
4538741-386: RNCC: 5 | RNVC: 9
4538741-308: RNCC: 5 | RNVC: 9
4538741-308: RNCC: 5 | RNVC: 9
4538741-386: RNCC: 5 | RNVC: 9
94042-991: RNCC: C | RNVC: 1

7 Mar 1993

3040-01-372-8553
Shouldered Shaft

013728553
3HD598: RNCC: 3 | RNVC: 2
12440542: RNCC: 3 | RNVC: 2
A6210500: RNCC: 5 | RNVC: 2
14127: RNCC: 5 | RNVC: 2
3HD598: RNCC: 5 | RNVC: 9
2000001: RNCC: 5 | RNVC: 9
12440452: RNCC: 5 | RNVC: 9
12440542: RNCC: 5 | RNVC: 9

20 Mar 1993

3040-01-377-3111
Ball Joint

013773111
523130-2: RNCC: 3 | RNVC: 1
523130-2: RNCC: 3 | RNVC: 2
523130: RNCC: D | RNVC: 9

12 Jul 1993

3040-01-377-6770
Body Hub

013776770
211061327: RNCC: 3 | RNVC: 2
801-6406768-2: RNCC: 5 | RNVC: 2
6406768: RNCC: D | RNVC: 9

23 Jul 1993

3040-01-377-6805
Nonaircraft Mechanical Actuator

013776805
12417482: RNCC: 1 | RNVC: 2
12417482: RNCC: 3 | RNVC: 2
85.62680.5701: RNCC: 5 | RNVC: 2
115200340061: RNCC: 5 | RNVC: 2
115200340061: RNCC: 5 | RNVC: 9
12417482: RNCC: 5 | RNVC: 9
12417482: RNCC: 5 | RNVC: 9

23 Jul 1993

3040-01-379-4578
Mechanical Drive Housing

013794578
8909-738-001: RNCC: 3 | RNVC: 2

31 Aug 1993

3040-01-378-7674
Shouldered Shaft

013787674
12369937: RNCC: 3 | RNVC: 2

21 Aug 1993

3040-01-383-5537
Control Cam

013835537
7002563-1: RNCC: 3 | RNVC: 2
7002563-1: RNCC: 5 | RNVC: 2
7002563-1: RNCC: 5 | RNVC: 9

25 Nov 1993

3040-01-383-5696
Shouldered Shaft

013835696
6405258-201: RNCC: 3 | RNVC: 2
752-6405258-201: RNCC: 5 | RNVC: 2
6405258: RNCC: D | RNVC: 9

25 Nov 1993

3040-01-383-5393
Shoe Type Brake

013835393
6.50-0108-9,10: RNCC: 3 | RNVC: 2
471097PN9,10: RNCC: 5 | RNVC: 2
471097PN9: RNCC: 5 | RNVC: 9
6.50-0108-9: RNCC: 5 | RNVC: 9
6.50-0108-9X10: RNCC: 5 | RNVC: 9
471097: RNCC: D | RNVC: 9

25 Nov 1993

3040-01-384-9720
Mechanical Drive Housing

013849720
J2559772-9: RNCC: 3 | RNVC: 2

30 Dec 1993

3040-01-386-1698
Shouldered Shaft

013861698
50285-0498: RNCC: 3 | RNVC: 2

28 Jan 1994

3040-01-386-3379
Shouldered Shaft

013863379
310A11F1: RNCC: 3 | RNVC: 2

3 Feb 1994

3040-01-386-3462
Rigid Connecting Link

013863462
12385236: RNCC: 3 | RNVC: 2

3 Feb 1994

3040-01-387-7244
Flexible Shaft Assembly Core

013877244
57353-00 43FT: RNCC: 3 | RNVC: 2
57353-43: RNCC: 5 | RNVC: 9

10 Mar 1994

3040-01-386-6646
Counterbalance Weight

013866646
236B2275-P003: RNCC: 3 | RNVC: 9
236B2275-P003: RNCC: 5 | RNVC: 9
963E440 ITEM 54: RNCC: 5 | RNVC: 9
236B2275-P003: RNCC: C | RNVC: 1
963E440: RNCC: D | RNVC: 9

10 Feb 1994

3040-01-389-7839
Counterbalance Weight

013897839
132V996-1: RNCC: 3 | RNVC: 9
511L333FA ITEM 34: RNCC: 5 | RNVC: 9
511L333FA ITEM 34: RNCC: C | RNVC: 1
511L333FA ITEM 34: RNCC: C | RNVC: 1
132V996-1: RNCC: C | RNVC: 1
132V996-1: RNCC: C | RNVC: 1

3 May 1994

3040-01-391-3909
Remote Control Lever

013913909
4151910: RNCC: 3 | RNVC: 9
4151910: RNCC: 5 | RNVC: 9

9 Jun 1994

3040-01-392-3874
Straight Axle

013923874
3202-Y-9931: RNCC: 3 | RNVC: 2
3202-Y-9931: RNCC: 5 | RNVC: 2
3202-Y-9931: RNCC: 5 | RNVC: 2

29 Jun 1994

3040-01-393-7546
Linear Actuating Cylinder Assembly Parts Kit

013937546
8D00196-89: RNCC: 3 | RNVC: 2
660180005: RNCC: 5 | RNVC: 2
CC13003058: RNCC: 5 | RNVC: 2
8D00196-89: RNCC: 5 | RNVC: 9

26 Jul 1994

3040-01-392-6985
Nonaircraft Mechanical Actuator

013926985
58202-04: RNCC: 3 | RNVC: 2
58202: RNCC: 5 | RNVC: 2
58202-4: RNCC: 5 | RNVC: 9

5 Jul 1994

3040-01-395-4350
Linear Actuating Cylinder Piston

013954350
747877: RNCC: 3 | RNVC: 2

29 Aug 1994

3040-01-407-0801
Straight Shaft

014070801
064612-1: RNCC: 3 | RNVC: 2
064612: RNCC: D | RNVC: 9

20 Jan 1995

3040-01-407-0799
Straight Shaft

014070799
056651: RNCC: 3 | RNVC: 2

20 Jan 1995

3040-01-407-4910
Nonrotating Shaft Eye Bracket

014074910
23052578: RNCC: 3 | RNVC: 2
23036002 ITEM 51: RNCC: 5 | RNVC: 2
23052578: RNCC: 5 | RNVC: 2

30 Jan 1995

3040-01-407-0698
Body Hub

014070698
H070057-005: RNCC: 3 | RNVC: 2
H700575: RNCC: 5 | RNVC: 9
H70057S: RNCC: C | RNVC: 1

20 Jan 1995

3040-01-408-5738
Mechanical Drive Housing Part

014085738
8-007-209-10: RNCC: 3 | RNVC: 2
NI-082-602-A ITEM NO.7: RNCC: 5 | RNVC: 9

21 Feb 1995

3040-01-409-0026
Rigid Connecting Link

014090026
12274702-2: RNCC: 3 | RNVC: 2
12274702: RNCC: D | RNVC: 9

3 Mar 1995

3040-01-411-0673
Rigid Connecting Link

014110673
12365646: RNCC: 3 | RNVC: 2

16 Mar 1995

3040-01-410-8113
Shouldered Shaft

014108113
12364672: RNCC: 3 | RNVC: 2
12364672: RNCC: 3 | RNVC: 2
12364672: RNCC: 5 | RNVC: 2

12 Mar 1995

3040-01-411-7075
Rigid Connecting Link

014117075
214-010-573-101: RNCC: 3 | RNVC: 2
214-010-410-119: RNCC: E | RNVC: 8

30 Mar 1995

3040-01-411-2143
Rigid Connecting Link

014112143
12365743: RNCC: 3 | RNVC: 2
12365743: RNCC: 5 | RNVC: 2
12365743: RNCC: 5 | RNVC: 2

20 Mar 1995

3040-01-412-0290
Straight Shaft

014120290
J143173: RNCC: 3 | RNVC: 2
H206324D001 ITEM #14: RNCC: 5 | RNVC: 2
H206322D001 ITEM #14: RNCC: 5 | RNVC: 2
H206323D001 ITEM #14: RNCC: 5 | RNVC: 2
C200662D015: RNCC: 5 | RNVC: 9
H206324D001: RNCC: D | RNVC: 9

8 Apr 1995

3040-01-412-7605
Spline Adapter

014127605
A15PS257-2: RNCC: 1 | RNVC: 2
118041-2: RNCC: 3 | RNVC: 2
118041-2: RNCC: 5 | RNVC: 9
118041: RNCC: D | RNVC: 9
A15PS257: RNCC: D | RNVC: 9

27 Apr 1995

3040-01-415-3177
Shaft Retaining Plate

014153177
07057001102: RNCC: 3 | RNVC: 2
A07057.001.102: RNCC: 5 | RNVC: 9
SW146 FIND NO.5C: RNCC: 5 | RNVC: 9
SW146-5C: RNCC: 5 | RNVC: 9
SW146: RNCC: 5 | RNVC: 9

23 Jun 1995

3040-01-413-5992
Shouldered Shaft Assembly

014135992
RCSK16760: RNCC: 3 | RNVC: 2
GS4076: RNCC: 5 | RNVC: 2
12448998: RNCC: 5 | RNVC: 2
RCSK-16760: RNCC: 5 | RNVC: 9

17 May 1995

3040-01-417-4983
Straight Shaft

014174983
21110-1005-1: RNCC: 3 | RNVC: 2
21110-9: RNCC: 5 | RNVC: 9
21110: RNCC: D | RNVC: 9

8 Aug 1995

3040-01-414-0420
Counterbalance Weight

014140420
260764-2: RNCC: 3 | RNVC: 2
260764: RNCC: D | RNVC: 9

30 May 1995

3040-01-417-2790
Spur Gearshaft

014172790
593-6960891 PC 14: RNCC: 3 | RNVC: 2
6960891: RNCC: D | RNVC: 9

3 Aug 1995

3040-01-417-6191
Linear Actuating Cylinder Assembly

014176191
58497: RNCC: 3 | RNVC: 2
NN17680A: RNCC: 3 | RNVC: 2
12420793: RNCC: 5 | RNVC: 9
12420793: RNCC: 5 | RNVC: 9
12420793: RNCC: 7 | RNVC: 2

10 Aug 1995

3040-01-418-3145
Rigid Connecting Link

014183145
901-301-014-125: RNCC: 3 | RNVC: 2
C-01037-125: RNCC: 5 | RNVC: 9

24 Aug 1995

3040-01-418-4276
Ball Joint

014184276
6990418: RNCC: 3 | RNVC: 2

25 Aug 1995

3040-01-418-5794
Brake Band And Lining

014185794
278 0775-802: RNCC: 3 | RNVC: 9
178-0373-806 ITEM 007B: RNCC: 5 | RNVC: 2
BULTN S1,A1-8.3 ITEM 7: RNCC: 5 | RNVC: 2
278 0775-802: RNCC: 5 | RNVC: 2
278 0775-802: RNCC: 5 | RNVC: 2
278 0162-803: RNCC: 5 | RNVC: 9
178-0373-806 ITEM 007B: RNCC: 5 | RNVC: 9
278 0162-803: RNCC: C | RNVC: 1

30 Aug 1995

3040-01-419-9857
Push-Pull Control Assembly

014199857
F101614G: RNCC: 3 | RNVC: 2

5 Oct 1995

3040-01-420-3859
Manual Control Lever

014203859
A48659-1MDA: RNCC: 3 | RNVC: 2
D52139 ITEM 20: RNCC: 5 | RNVC: 2
D48671 ITEM 20: RNCC: C | RNVC: 1

16 Oct 1995

3040-01-421-1586
Shouldered Shaft

014211586
8E4-4A12-001B: RNCC: 3 | RNVC: 2
8E4-4A12-700L: RNCC: 5 | RNVC: 9

2 Nov 1995

3040-01-422-1324
Transmis Lrg Pusher

014221324
J-38736-5: RNCC: 3 | RNVC: 2

22 Nov 1995

3040-01-422-3976
Shouldered Shaft

014223976
3222-3000-8: RNCC: 3 | RNVC: 2

1 Dec 1995

3040-01-423-6645
Shouldered Shaft

014236645
24454: RNCC: 3 | RNVC: 9

5 Jan 1996

3040-01-423-1678
Aircraft Cooling Turbine

014231678
2205818-1: RNCC: 3 | RNVC: 2
582096-1: RNCC: 5 | RNVC: 9
2204727-1: RNCC: 5 | RNVC: 9
10405457: RNCC: 6 | RNVC: 9

18 Dec 1995

3040-01-430-2783
Rigid Connecting Link

014302783
70400-08110-108: RNCC: 3 | RNVC: 2
70400-08110-108: RNCC: 5 | RNVC: 2
70400-08110-108: RNCC: 7 | RNVC: 2
70400-08110: RNCC: D | RNVC: 9

26 Apr 1996

3040-01-431-9224
Shouldered Shaft

014319224
21319-1004-1: RNCC: 3 | RNVC: 2
21319 FIND NO.10: RNCC: 5 | RNVC: 9
21319-10: RNCC: 5 | RNVC: 9
21319-1004: RNCC: D | RNVC: 9
21319: RNCC: D | RNVC: 9

21 May 1996

3040-01-432-5676
Piston Ring

014325676
78504: RNCC: 3 | RNVC: 2
32063: RNCC: 5 | RNVC: 9

10 Jun 1996

3040-01-429-6877
Shouldered Shaft

014296877
379D980-01: RNCC: 3 | RNVC: 2
759J040 PC 42: RNCC: 5 | RNVC: 2
379D980PC1: RNCC: C | RNVC: 1

16 Apr 1996

3040-01-433-6556
Rigid Connecting Link

014336556
4660911-014: RNCC: 3 | RNVC: 2
4660911-014: RNCC: 3 | RNVC: 9
4660911-014: RNCC: 5 | RNVC: 2

8 Jul 1996

3040-01-433-8342
Spur Gearshaft

014338342
3131601: RNCC: 3 | RNVC: 2

11 Jul 1996

3040-01-434-0194
Manual Control Lever

014340194
1199-187-1: RNCC: 3 | RNVC: 2
PL1199-000-1 LINE NO. 14: RNCC: 5 | RNVC: 9
1193-187-1: RNCC: 5 | RNVC: 9
1199-000-1 FIND 12: RNCC: 5 | RNVC: 9
1199-187-1: RNCC: 5 | RNVC: 9
1199-000-1: RNCC: D | RNVC: 9

17 Jul 1996

3040-01-434-3901
Rigid Connecting Link

014343901
1001623: RNCC: 3 | RNVC: 9
4660129-002: RNCC: 5 | RNVC: 2
4660129-002: RNCC: 5 | RNVC: 9
4660129: RNCC: 5 | RNVC: 9
4660129-002: RNCC: C | RNVC: 1

29 Jul 1996

3040-01-434-8610
Rigid Connecting Link

014348610
8682780: RNCC: 3 | RNVC: 2
8682780: RNCC: 5 | RNVC: 9

9 Aug 1996

3040-01-434-8709
Remote Control Lever

014348709
115-8543: RNCC: 3 | RNVC: 2
115-8543: RNCC: 5 | RNVC: 2
115-8543: RNCC: 5 | RNVC: 2

9 Aug 1996

3040-01-426-4514
Hydraulic Accumulator

014264514
849392-SP-ST: RNCC: 3 | RNVC: 2
849392-SP-ST: RNCC: 3 | RNVC: 2
134B491AD-1: RNCC: 5 | RNVC: 9

13 Mar 1996

3040-01-430-2606
Rigid Connecting Link

014302606
207795: RNCC: 3 | RNVC: 2
207795: RNCC: 5 | RNVC: 2
44754 ITEM NO.5: RNCC: 5 | RNVC: 2
207795: RNCC: 5 | RNVC: 2
44754: RNCC: D | RNVC: 9

25 Apr 1996

3040-01-430-2855
Shouldered Shaft

014302855
5363419: RNCC: 3 | RNVC: 2
6894422 ITEM 49: RNCC: 5 | RNVC: 2
689422: RNCC: D | RNVC: 9

26 Apr 1996

3040-01-431-7527
Shouldered Shaft

014317527
0656C0531J039A: RNCC: 3 | RNVC: 2
PL-999D0838 PC NO 26: RNCC: 5 | RNVC: 9
656C0531: RNCC: 5 | RNVC: 9
999D0838: RNCC: D | RNVC: 9

17 May 1996

3040-01-435-9542
Remote Control Lever

014359542
9511M79G03: RNCC: 3 | RNVC: 2

6 Sep 1996

3040-01-436-4160
Straight Shaft

014364160
1764AS133-1: RNCC: 3 | RNVC: 2

19 Sep 1996

3040-01-436-4982
Straight Shaft

014364982
F-2314: RNCC: 3 | RNVC: 9
F-2314: RNCC: 5 | RNVC: 9

20 Sep 1996

3040-01-436-8676
Straight Shaft

014368676
3305AS622-1: RNCC: 3 | RNVC: 2
3305AS622-1: RNCC: 5 | RNVC: 2
3305AS622-1: RNCC: 5 | RNVC: 9
3305AS622-1: RNCC: C | RNVC: 1
3305AS622: RNCC: D | RNVC: 9

30 Sep 1996

3040-01-441-3421
Mechanical Drive Housing

014413421
26012862: RNCC: 3 | RNVC: 2
12479062: RNCC: 3 | RNVC: 2
12479062: RNCC: 5 | RNVC: 2
26012862: RNCC: 5 | RNVC: 9
26060243: RNCC: 5 | RNVC: 9
12479062: RNCC: 5 | RNVC: 9

10 Feb 1997

3040-01-441-9082
Shouldered Shaft

014419082
21346-1003-1: RNCC: 3 | RNVC: 2
21220-8: RNCC: 5 | RNVC: 9
21346-1003: RNCC: 5 | RNVC: 9
21220: RNCC: D | RNVC: 9
21346: RNCC: D | RNVC: 9

26 Feb 1997

3040-01-442-9091
Shouldered Shaft Assembly

014429091
3179626-1: RNCC: 3 | RNVC: 2

26 Mar 1997

3040-01-445-3225
Control Cam

014453225
12357438: RNCC: 3 | RNVC: 2

29 May 1997

3040-01-446-8277
Shouldered Shaft

014468277
518-5794764 ITEM 52: RNCC: 3 | RNVC: 2
2018-13 ITEM 52: RNCC: 5 | RNVC: 9
5794764: RNCC: D | RNVC: 9

17 Jul 1997

3040-01-448-7749
Rigid Connecting Link

014487749
KC49136-1: RNCC: 3 | RNVC: 2
KC49136: RNCC: D | RNVC: 9

10 Sep 1997

3040-01-449-5676
Shouldered Shaft

014495676
630595: RNCC: 3 | RNVC: 2
630595: RNCC: 3 | RNVC: 9
630595: RNCC: 5 | RNVC: 9

6 Oct 1997

3040-01-449-5675
Shouldered Shaft

014495675
630594: RNCC: 3 | RNVC: 2
630594: RNCC: 3 | RNVC: 9
630594: RNCC: 5 | RNVC: 9

6 Oct 1997

3040-01-449-8988
Counterbalance Weight

014498988
397184-1: RNCC: 3 | RNVC: 2
397184-1: RNCC: 5 | RNVC: 9
397184: RNCC: D | RNVC: 9

20 Oct 1997

3040-01-450-5630
Manual Control Lever

014505630
B2016: RNCC: 3 | RNVC: 2
B2016: RNCC: 3 | RNVC: 9
D2500M ITEM 15: RNCC: 5 | RNVC: 2
D2500M ITEM 15: RNCC: 5 | RNVC: 9
D4000FF ITEM 35: RNCC: C | RNVC: 1
D11200FF ITEM 34: RNCC: C | RNVC: 1
D2500M: RNCC: D | RNVC: 9

14 Nov 1997

3040-01-451-3741
Shouldered Shaft

014513741
65125-11214-102: RNCC: 3 | RNVC: 2
65125-11214-102: RNCC: 5 | RNVC: 2
65125-11214: RNCC: D | RNVC: 9

15 Dec 1997

3040-01-452-0573
Straight Shaft

014520573
810335-1: RNCC: 3 | RNVC: 2
300052-16: RNCC: 5 | RNVC: 9
810335-1: RNCC: 5 | RNVC: 9
300052: RNCC: D | RNVC: 9

14 Jan 1998

Load More Results