What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 115 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 115 of 300

3040-01-467-6792
Linear Actuating Cylinder Assembly

014676792
DHV272B2/2B-1.50-3.000-0063/006-: RNCC: 3 | RNVC: 1
1H000044068: RNCC: 5 | RNVC: 9
DH72B2B-150-300-63-S11-0: RNCC: 5 | RNVC: 9

10 Sep 1999

3040-01-467-8010
Linear Actuating Cylinder Assembly

014678010
1H2H0A00276170: RNCC: 3 | RNVC: 2
AG201174A0: RNCC: 5 | RNVC: 9

15 Sep 1999

3040-01-475-8412
Shouldered Shaft

014758412
13834N18: RNCC: 3 | RNVC: 9
13834N18C: RNCC: 5 | RNVC: 2
13795N18-10: RNCC: 5 | RNVC: 9
PL-13796N18ITEM10: RNCC: 5 | RNVC: 9
13795N18-10: RNCC: C | RNVC: 1
13834N18: RNCC: C | RNVC: 1
PL-13796N18ITEM10: RNCC: C | RNVC: 1

14 Jun 2000

3040-01-475-6680
Rigid Connecting Link

014756680
124-5563773 PC 7: RNCC: 3 | RNVC: 2
124-5563772 PC 38: RNCC: 5 | RNVC: 9
5563772: RNCC: D | RNVC: 9
5563773: RNCC: D | RNVC: 9

8 Jun 2000

3040-01-476-6993
Rigid Connecting Link

014766993
74A400923-2001: RNCC: 3 | RNVC: 2
74A400923-2001: RNCC: 5 | RNVC: 9
74A400923-2001: RNCC: C | RNVC: 1

20 Jul 2000

3040-01-476-9922
Bell Crank

014769922
254-7015355PN3: RNCC: 3 | RNVC: 2
H749-3901 3: RNCC: 5 | RNVC: 2
7015355: RNCC: D | RNVC: 9

27 Jul 2000

3040-01-477-6667
Linear Actuating Cylinder Piston Rod

014776667
6768004117: RNCC: 3 | RNVC: 2

15 Aug 2000

3040-01-478-0376
Ball Joint

014780376
218127: RNCC: 3 | RNVC: 2

29 Aug 2000

3040-01-478-0605
Mechanical Drive Housing

014780605
134760: RNCC: 3 | RNVC: 2

29 Aug 2000

3040-01-478-2004
Airc Straight Shaft

014782004
769424: RNCC: 3 | RNVC: 2

31 Aug 2000

3040-01-478-2001
Airc Spur Gearshaft

014782001
769008: RNCC: 3 | RNVC: 2

31 Aug 2000

3040-01-478-6945
Transmission Fluid Cooler

014786945
002617: RNCC: 3 | RNVC: 2
582030-001: RNCC: 5 | RNVC: 2
3040PL0651268: RNCC: 6 | RNVC: 9

22 Sep 2000

3040-01-480-8755
Nonrotating Shaft Eye Bracket

014808755
7HB494: RNCC: 3 | RNVC: 2
53105: RNCC: 3 | RNVC: 2
7HB494: RNCC: 3 | RNVC: 9
53105: RNCC: 5 | RNVC: 9

8 Dec 2000

3040-01-481-2903
Ai Shouldered Shaft

014812903
41010066-102: RNCC: 3 | RNVC: 2

28 Dec 2000

3040-01-481-6389
Rigid Connecting Link

014816389
10052647: RNCC: 3 | RNVC: 2

18 Jan 2001

3040-01-482-6032
Controllable Swashplate

014826032
2501010: RNCC: 3 | RNVC: 2
2501010: RNCC: 5 | RNVC: 9

28 Feb 2001

3040-01-483-1154
Straight Shaft

014831154
556-7015844-13: RNCC: 3 | RNVC: 2
36-01-7806: RNCC: 5 | RNVC: 2
7015844: RNCC: D | RNVC: 9

16 Mar 2001

3040-01-483-2637
Rigid Connecting Link

014832637
8100 1251 0308 PC 321: RNCC: 3 | RNVC: 2
8100 1251 0307 PC 309: RNCC: 5 | RNVC: 2
8100 1251 0307: RNCC: D | RNVC: 9
8100 1251 0308: RNCC: D | RNVC: 9

22 Mar 2001

3040-01-484-5891
Rigid Connecting Link

014845891
923899.0492: RNCC: 3 | RNVC: 2
923899.0492: RNCC: 5 | RNVC: 2
9238990492: RNCC: 5 | RNVC: 9

2 May 2001

3040-01-488-7636
Straight Shaft

014887636
40001273: RNCC: 3 | RNVC: 2

4 Sep 2001

3040-01-488-9707
Linear Actuating Cylinder Piston

014889707
373 3042 501: RNCC: 3 | RNVC: 2

7 Sep 2001

3040-01-488-9290
Carriage Cylinder

014889290
50001197: RNCC: 3 | RNVC: 2

6 Sep 2001

3040-01-489-1098
Shouldered Shaft

014891098
7261661 PC 4: RNCC: 3 | RNVC: 2
7261661: RNCC: D | RNVC: 9

12 Sep 2001

3040-01-507-1410
Linear Actuating Cylinder

015071410
B1-01C10M: RNCC: 3 | RNVC: 2

21 Apr 2003

3040-01-469-1163
Shouldered Shaft

014691163
12462887: RNCC: 3 | RNVC: 2
12462887: RNCC: 5 | RNVC: 2

3 Nov 1999

3040-01-472-7637
Shaft Collar

014727637
HM022-051: RNCC: 3 | RNVC: 2

15 Mar 2000

3040-01-466-4154
Spur Gearshaft

014664154
33020: RNCC: 3 | RNVC: 2
32115: RNCC: 5 | RNVC: 9

19 Jul 1999

3040-01-466-8797
Rigid Connecting Link

014668797
4086412: RNCC: 3 | RNVC: 2
3040PL0669936: RNCC: 6 | RNVC: 9

5 Aug 1999

3040-01-475-5244
Guide Tube

014755244
2784726-1: RNCC: 3 | RNVC: 2
2784726: RNCC: D | RNVC: 9

6 Jun 2000

3040-01-491-3934
Linear Actuating Cylinder Piston Rod

014913934
374 030 0001: RNCC: 3 | RNVC: 2
374 030 0001: RNCC: 5 | RNVC: 9
B128158-1: RNCC: 5 | RNVC: 9

19 Oct 2001

3040-01-491-5730
Flexible Shaft Assembly

014915730
22001-100 X 450IN: RNCC: 3 | RNVC: 2
22001-100 X 37FT 6IN: RNCC: 5 | RNVC: 2
B-409-22001-100: RNCC: 5 | RNVC: 9
22001: RNCC: D | RNVC: 9

25 Oct 2001

3040-01-493-4220
Spur Gearshaft

014934220
596-7409770-25: RNCC: 3 | RNVC: 2
B831-9231-25: RNCC: 5 | RNVC: 2
B831-9231: RNCC: D | RNVC: 9
7409770: RNCC: D | RNVC: 9

7 Jan 2002

3040-01-493-7596
Shouldered Shaft Assembly

014937596
S23-12475-0: RNCC: 3 | RNVC: 2
S23-12475-0K: RNCC: 5 | RNVC: 9
S23-12475: RNCC: 5 | RNVC: 9

16 Jan 2002

3040-01-490-9759
Input Sp Shaft Assy

014909759
532274-4: RNCC: 3 | RNVC: 2
532274-4: RNCC: 5 | RNVC: 2

9 Oct 2001

3040-01-491-5729
Flexible Shaft Assembly

014915729
22001-100 X 406IN: RNCC: 3 | RNVC: 2
22001-100 X 33FT 10IN: RNCC: 5 | RNVC: 2
B-409-22001-100: RNCC: 5 | RNVC: 9
22001: RNCC: D | RNVC: 9

25 Oct 2001

3040-01-491-6494
Flexible Shaft Assembly

014916494
22001-100 X 261 IN: RNCC: 3 | RNVC: 2
22001-100 X 21FT 9IN: RNCC: 5 | RNVC: 2
B-409-22001-100: RNCC: 5 | RNVC: 9
22001-100 X 261: RNCC: C | RNVC: 1
22001: RNCC: D | RNVC: 9

26 Oct 2001

3040-01-489-0914
Hydraulic Accumulator Cylinder

014890914
7261661-2: RNCC: 3 | RNVC: 2
7261661: RNCC: D | RNVC: 9

11 Sep 2001

3040-01-491-8001
Linear Actuating Cylinder

014918001
86400421: RNCC: 3 | RNVC: 2
86400421: RNCC: 5 | RNVC: 1
86400421: RNCC: 5 | RNVC: 2

1 Nov 2001

3040-01-521-1838
Bell Crank

015211838
709F4114: RNCC: 3 | RNVC: 2

14 Jun 2004

3040-01-521-9276
Helical Gear And Shaft Assembly

015219276
106-0317: RNCC: 3 | RNVC: 2
506-3005 PC. NO. 40: RNCC: 5 | RNVC: 2

12 Jul 2004

3040-01-524-2233
Rigid Connecting Link

015242233
12423358-001: RNCC: 3 | RNVC: 2
12423358-001: RNCC: 5 | RNVC: 2
12423358: RNCC: D | RNVC: 9

24 Sep 2004

3040-01-457-5885
Bellcrank

014575885
A3168012-1: RNCC: 3 | RNVC: 2

28 Jul 1998

3040-01-459-3789
Rod Seal Parts Kit

014593789
051-KR011-00100: RNCC: 3 | RNVC: 9

29 Sep 1998

3040-01-459-6628
Shouldered Shaft

014596628
8100-1253-0238 PC 552: RNCC: 3 | RNVC: 2
8100-1253-0238: RNCC: D | RNVC: 9

9 Oct 1998

3040-01-460-1122
Straight Shaft

014601122
167-6404602 FIND 58: RNCC: 3 | RNVC: 2
6404602: RNCC: D | RNVC: 9

27 Oct 1998

3040-01-459-7916
Rigid Connecting Link

014597916
74A400536-1002: RNCC: 3 | RNVC: 2

15 Oct 1998

3040-01-468-9601
Linear Actuating Cylinder

014689601
45M-707: RNCC: 3 | RNVC: 2
EA1000 ITEM 54: RNCC: 5 | RNVC: 2
EA1000: RNCC: D | RNVC: 9

28 Oct 1999

3040-01-469-0596
Nonaircraft Mechanical Actuator

014690596
G672116-1: RNCC: 3 | RNVC: 2
G672116-1: RNCC: 5 | RNVC: 2
G672116-1: RNCC: 5 | RNVC: 2
G672116: RNCC: D | RNVC: 9

2 Nov 1999

3040-01-470-2925
Rotating Shaft Eye Bracket

014702925
124-4322609 PC 4: RNCC: 3 | RNVC: 2
124-4322609: RNCC: D | RNVC: 9

14 Dec 1999

3040-01-471-1565
Bell Crank Support

014711565
7-211660025-5: RNCC: 3 | RNVC: 2
7-211660025-5: RNCC: 5 | RNVC: 9

25 Jan 2000

3040-01-471-9127
Shaft Idler

014719127
901-011-351-103: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-472-0947
Seal Adapter Assy

014720947
901-045-255-101: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-463-2059
Straight Shaft

014632059
3Q1107D-2: RNCC: 3 | RNVC: 2

11 Mar 1999

3040-01-463-5318
Rigid Connecting Link

014635318
1500AS106-1: RNCC: 3 | RNVC: 2

25 Mar 1999

3040-01-466-7557
Shaft Idler

014667557
3-417-204-448-42: RNCC: 3 | RNVC: 2

30 Jul 1999

3040-01-467-6920
Linear Actuating Cylinder Assembly Parts Kit

014676920
051-KR075-63: RNCC: 3 | RNVC: 9
171-KB001-00150: RNCC: C | RNVC: 1

10 Sep 1999

3040-01-467-7721
Linear Actuating Cylinder Assembly

014677721
1H2H0A00081311: RNCC: 3 | RNVC: 2
AG201170B0: RNCC: 5 | RNVC: 9

14 Sep 1999

3040-01-472-7550
Straight Shaft

014727550
12370859: RNCC: 3 | RNVC: 2

15 Mar 2000

3040-01-474-8132
Rigid Connecting Link

014748132
8066447: RNCC: 3 | RNVC: 9
8066447: RNCC: 5 | RNVC: 2
AT154835: RNCC: 5 | RNVC: 9

12 May 2000

3040-01-475-3042
Mechanical Drive Housing

014753042
12462846: RNCC: 3 | RNVC: 2

31 May 2000

3040-01-475-9976
Straight Shaft

014759976
5444-181: RNCC: 3 | RNVC: 2
5444-166 ITEM 3: RNCC: 5 | RNVC: 2
5444-166: RNCC: D | RNVC: 9

21 Jun 2000

3040-01-476-6197
Indicator Arm

014766197
20056-2: RNCC: 3 | RNVC: 2
A-810-20056-2: RNCC: 5 | RNVC: 9
20056: RNCC: D | RNVC: 9

18 Jul 2000

3040-01-476-8401
Linear Actuating Cylinder Assembly

014768401
6372003151: RNCC: 3 | RNVC: 2

25 Jul 2000

3040-01-477-4794
Linear Actuating Cylinder Piston Rod

014774794
6768002196: RNCC: 3 | RNVC: 2

10 Aug 2000

3040-01-477-9243
Housing Adapter

014779243
38-C2550: RNCC: 3 | RNVC: 2

23 Aug 2000

3040-01-478-1051
Shouldered Shaft

014781051
131413: RNCC: 3 | RNVC: 2

30 Aug 2000

3040-01-478-1204
Straight Shaft

014781204
2-33401: RNCC: 3 | RNVC: 2
2-33401: RNCC: 3 | RNVC: 9

30 Aug 2000

3040-01-478-1999
Airc Spur Gearshaft

014781999
769009: RNCC: 3 | RNVC: 2

31 Aug 2000

3040-01-478-6001
Rigid Connecting Link

014786001
12466448: RNCC: 3 | RNVC: 2

20 Sep 2000

3040-01-479-1709
Spline Adapter

014791709
7-311B11134-5: RNCC: 3 | RNVC: 2
1593588-11: RNCC: 5 | RNVC: 2
1593588-11: RNCC: 5 | RNVC: 2
7-311B11134-5: RNCC: 5 | RNVC: 9

13 Oct 2000

3040-01-478-7794
Rigid Connecting Link

014787794
A22-41519-000: RNCC: 3 | RNVC: 2

27 Sep 2000

3040-01-479-4662
Control Cam

014794662
845-7286651 ITEM 18: RNCC: 3 | RNVC: 2

23 Oct 2000

3040-01-480-1890
Ai Shouldered Shaft

014801890
973448: RNCC: 3 | RNVC: 2

9 Nov 2000

3040-01-480-3976
Mechanical Drive Housing

014803976
9HB14: RNCC: 3 | RNVC: 2
9HB14: RNCC: 3 | RNVC: 9
GS-4608: RNCC: 5 | RNVC: 2

18 Nov 2000

3040-01-480-7593
Brake Band And Lining

014807593
24202229: RNCC: 3 | RNVC: 2
5740315: RNCC: 5 | RNVC: 2
3040PL1943929: RNCC: 6 | RNVC: 9

5 Dec 2000

3040-01-481-1667
Shouldered Shaft

014811667
859B01: RNCC: 3 | RNVC: 9
FM 86519 PC NO 30: RNCC: 5 | RNVC: 9
FM 86519: RNCC: D | RNVC: 9

20 Dec 2000

3040-01-481-2287
Shouldered Shaft

014812287
8100-1253-0238 FIND NO 572: RNCC: 3 | RNVC: 2
8100-1253-0238: RNCC: D | RNVC: 9

22 Dec 2000

3040-01-482-0364
Rigid Connecting Link

014820364
803-6397269 PC 22: RNCC: 3 | RNVC: 2
8100-1251-0307 PC NO 48: RNCC: 5 | RNVC: 2
8100-1251-0307: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9

6 Feb 2001

3040-01-482-2936
Bell Crank

014822936
L6410380-005: RNCC: 3 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2

14 Feb 2001

3040-01-482-4716
Rigid Connecting Link

014824716
8100-1251-0307 PC NO 59: RNCC: 3 | RNVC: 2
8100-1251-0307: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9

23 Feb 2001

3040-01-482-8424
Piston Ring Set

014828424
3802831: RNCC: 3 | RNVC: 2
3802831: RNCC: 5 | RNVC: 2

6 Mar 2001

3040-01-483-3614
Multiple Disk Brake

014833614
76470: RNCC: 3 | RNVC: 2

27 Mar 2001

3040-01-483-4311
Rigid Connecting Link

014834311
75A353063-2005: RNCC: 3 | RNVC: 2

28 Mar 2001

3040-01-482-9942
Straight Shaft

014829942
7103271-2: RNCC: 3 | RNVC: 2
7103271: RNCC: D | RNVC: 9

13 Mar 2001

3040-01-485-0787
Hub Clamp

014850787
5489226: RNCC: 3 | RNVC: 2
5489224 PC 7: RNCC: 5 | RNVC: 2
5489224: RNCC: D | RNVC: 9

16 May 2001

3040-01-485-7569
Shouldered Shaft

014857569
693-10330-2: RNCC: 3 | RNVC: 2

6 Jun 2001

3040-01-488-6079
Linear Actuating Cylinder

014886079
721-7069909-34: RNCC: 3 | RNVC: 2
H861-1505-34: RNCC: 5 | RNVC: 2
H861-1505: RNCC: D | RNVC: 9
7069909: RNCC: D | RNVC: 9

29 Aug 2001

3040-01-491-7970
Ball Joint

014917970
60745K811: RNCC: 3 | RNVC: 2

1 Nov 2001

3040-01-489-1088
Counterbalance Weight

014891088
70219-01045-106: RNCC: 3 | RNVC: 2
70219-01045: RNCC: D | RNVC: 9

12 Sep 2001

3040-01-492-4333
Linear Actuating Cylinder Assembly Parts Kit

014924333
S26-58467-0: RNCC: 3 | RNVC: 2
S4-ML-3060A PAGE 16: RNCC: 5 | RNVC: 1
S26-58467-0: RNCC: 5 | RNVC: 9

28 Nov 2001

3040-01-493-4036
Linear Actuating Cylinder Piston

014934036
8675508: RNCC: 3 | RNVC: 2

4 Jan 2002

3040-01-493-4718
Push-Pull Control Assembly

014934718
23722: RNCC: 3 | RNVC: 2

8 Jan 2002

3040-01-494-4239
Shouldered Shaft

014944239
801409: RNCC: 3 | RNVC: 2
801409: RNCC: 3 | RNVC: 9
801409 ITEM NO. 6: RNCC: 5 | RNVC: 9
1801490 ITEM NO. 6: RNCC: 5 | RNVC: 9
1801490: RNCC: D | RNVC: 9

12 Feb 2002

3040-01-494-9022
Manual Control Lever

014949022
715178-A: RNCC: 3 | RNVC: 2

27 Feb 2002

3040-01-495-3798
Pawl

014953798
9HA868: RNCC: 3 | RNVC: 2
9HA868: RNCC: 3 | RNVC: 9
LEELC046GH-1SS: RNCC: 5 | RNVC: 2

14 Mar 2002

3040-01-495-3664
Rigid Connecting Link

014953664
4726-109: RNCC: 3 | RNVC: 2
74B463604-109: RNCC: 7 | RNVC: 2

14 Mar 2002

3040-01-495-6253
Control Cam

014956253
1997-34-3: RNCC: 3 | RNVC: 2
P000161: RNCC: 5 | RNVC: 2

21 Mar 2002

3040-01-495-8283
Spline Adapter

014958283
3-52443-3: RNCC: 3 | RNVC: 2
3-52443: RNCC: D | RNVC: 9

26 Mar 2002

3040-01-496-3673
Mechanically Actuated Spindle

014963673
29537933: RNCC: 3 | RNVC: 2
22KP568: RNCC: 5 | RNVC: 1

12 Apr 2002

3040-01-497-2754
Transmission Sleeve

014972754
7052623: RNCC: 3 | RNVC: 2
7052623: RNCC: 5 | RNVC: 2

15 May 2002

3040-01-497-7690
Shouldered Shaft Assembly

014977690
0753227: RNCC: 3 | RNVC: 2

4 Jun 2002

3040-01-497-2039
Mechanically Actuated Spindle

014972039
S18334-006: RNCC: 3 | RNVC: 2
B-801-S18334-006: RNCC: 5 | RNVC: 2
S18943 IT #11: RNCC: 5 | RNVC: 2

13 May 2002

3040-01-498-8198
Shouldered Shaft

014988198
A260C-99: RNCC: 3 | RNVC: 2

2 Jul 2002

3040-01-499-2862
Hub Clamp

014992862
15110: RNCC: 3 | RNVC: 2
8L006: RNCC: 5 | RNVC: 2

18 Jul 2002

3040-01-499-0917
Linear Actuating Cylinder Piston

014990917
563-6984943-106: RNCC: 3 | RNVC: 2
H552-0405-106: RNCC: 5 | RNVC: 2
563-6984943: RNCC: D | RNVC: 9

12 Jul 2002

3040-01-500-0210
Remote Control Lever

015000210
563-7066808-85: RNCC: 3 | RNVC: 2
H552-0603-85: RNCC: 5 | RNVC: 2
563-7066808: RNCC: D | RNVC: 9

12 Aug 2002

3040-01-501-6930
Spur Gearshaft

015016930
20818: RNCC: 3 | RNVC: 2

10 Oct 2002

3040-01-501-4554
Rigid Connecting Link

015014554
805-1623943 PC 19: RNCC: 3 | RNVC: 2
803-1041890 PC 48: RNCC: 3 | RNVC: 2
803-1623943 PC PC 19: RNCC: 5 | RNVC: 2
805-1623943: RNCC: D | RNVC: 9
1041890: RNCC: D | RNVC: 9
1623943: RNCC: D | RNVC: 9

2 Oct 2002

3040-01-503-3421
Straight Shaft

015033421
4503363-2: RNCC: 3 | RNVC: 2

12 Dec 2002

3040-01-503-3478
Universal Drive Shaft

015033478
1321175: RNCC: 3 | RNVC: 2
1321175: RNCC: 5 | RNVC: 9
501006961: RNCC: 5 | RNVC: 9

13 Dec 2002

3040-01-503-6246
Spacer Tube

015036246
6623482: RNCC: 3 | RNVC: 2
6623482: RNCC: 5 | RNVC: 9

30 Dec 2002

3040-01-503-6474
Rigid Connecting Link

015036474
6623527: RNCC: 3 | RNVC: 2
6623527: RNCC: 5 | RNVC: 9

2 Jan 2003

3040-01-503-7814
Shouldered Shaft

015037814
15470N18A: RNCC: 3 | RNVC: 2
4X8RS10X5: RNCC: 3 | RNVC: 9
15469N18-10: RNCC: 5 | RNVC: 9
PL-15469N18-10: RNCC: 5 | RNVC: 9
4X8RS10X5: RNCC: C | RNVC: 1
PL-15469N18-10: RNCC: C | RNVC: 1
15469N18-10: RNCC: C | RNVC: 1
15469N18: RNCC: D | RNVC: 9

8 Jan 2003

3040-01-503-8985
Flexible Drive Shaft

015038985
7491071: RNCC: 3 | RNVC: 2
7491071: RNCC: 5 | RNVC: 2

13 Jan 2003

3040-01-504-9909
Push-Pull Control Assembly

015049909
21407230: RNCC: 3 | RNVC: 2
C-C-10617: RNCC: 5 | RNVC: 9
3851051 17 VLVO: RNCC: 5 | RNVC: 9
C-C-10617: RNCC: 5 | RNVC: 9
3851051-17: RNCC: 5 | RNVC: 9

18 Feb 2003

3040-01-505-1159
Shouldered Axle

015051159
T003224299: RNCC: 3 | RNVC: 2
T003224299: RNCC: 3 | RNVC: 9
A31170020 ITEM 11: RNCC: 5 | RNVC: 9
A31170020: RNCC: D | RNVC: 9

24 Feb 2003

3040-01-505-3322
Nonrotating Shaft Eye Bracket

015053322
5599884-10: RNCC: 3 | RNVC: 2

4 Mar 2003

3040-01-505-9354
Rigid Connecting Link

015059354
12422798: RNCC: 3 | RNVC: 2
12422798: RNCC: 5 | RNVC: 2
12422798: RNCC: 5 | RNVC: 2

19 Mar 2003

3040-01-505-9356
Rigid Connecting Link

015059356
12422799: RNCC: 3 | RNVC: 2
12422799: RNCC: 5 | RNVC: 2
12422799: RNCC: 5 | RNVC: 2

19 Mar 2003

3040-01-507-7531
Planetary Gears Carrier

015077531
3004319: RNCC: 3 | RNVC: 2
3004319: RNCC: 5 | RNVC: 9

5 May 2003

3040-01-509-2985
Straight Shaft

015092985
78902 2: RNCC: 3 | RNVC: 2

18 Jun 2003

3040-01-509-9914
Spur Gearshaft

015099914
25714: RNCC: 3 | RNVC: 2

10 Jul 2003

3040-01-512-0474
Rigid Connecting Link

015120474
8M0008111: RNCC: 3 | RNVC: 2
883082: RNCC: 5 | RNVC: 9

21 Aug 2003

3040-01-511-8974
Body Hub

015118974
A5462-1: RNCC: 3 | RNVC: 2

19 Aug 2003

3040-01-511-9995
Spur Gearshaft

015119995
3313100: RNCC: 3 | RNVC: 2
3313100: RNCC: 3 | RNVC: 9
921900-1326: RNCC: 5 | RNVC: 9

20 Aug 2003

3040-01-512-3071
Accumulator Cap

015123071
R87525: RNCC: 3 | RNVC: 9
200134AEPC415: RNCC: 5 | RNVC: 9
200134AEPC415: RNCC: 5 | RNVC: 9
R87525: RNCC: 5 | RNVC: 9
R87525: RNCC: C | RNVC: 1
200134AEPC415: RNCC: C | RNVC: 1
200134AEPC415: RNCC: C | RNVC: 1
R87525: RNCC: C | RNVC: 1

27 Aug 2003

3040-01-512-3708
Master Rebuild Kit

015123708
90-015-3071: RNCC: 3 | RNVC: 2

28 Aug 2003

3040-01-512-7788
Shaft Retaining Plate

015127788
97007-1-4: RNCC: 3 | RNVC: 2

10 Sep 2003

3040-01-512-9407
Linear Actuating Cylinder Cap

015129407
C-6690P: RNCC: 3 | RNVC: 2

15 Sep 2003

3040-01-512-9971
Nonrotating Shaft Eye Bracket

015129971
12309-1-151-000: RNCC: 3 | RNVC: 2
12270-PL FIND NO. 22: RNCC: 5 | RNVC: 2

16 Sep 2003

3040-01-513-0895
Linear Actuating Cylinder Assembly

015130895
21903269: RNCC: 3 | RNVC: 2

17 Sep 2003

3040-01-513-1834
Linear Actuating Cylinder Assembly Parts Kit

015131834
8M0090322: RNCC: 3 | RNVC: 2
878412A 1: RNCC: 5 | RNVC: 9
878412A 02: RNCC: 5 | RNVC: 9

19 Sep 2003

3040-01-513-1824
Linear Actuating Cylinder Assembly

015131824
8M0142998: RNCC: 3 | RNVC: 2
878235A02: RNCC: 5 | RNVC: 2
878235A03: RNCC: 5 | RNVC: 9
878235A 1: RNCC: 5 | RNVC: 9

19 Sep 2003

3040-01-513-7620
Shouldered Shaft

015137620
7028977: RNCC: 3 | RNVC: 2
8036609: RNCC: 5 | RNVC: 9
8036609: RNCC: 5 | RNVC: 9
0734 309 356: RNCC: 5 | RNVC: 9

6 Oct 2003

3040-01-513-7431
Striker Nut Plate Weldment

015137431
8036059: RNCC: 3 | RNVC: 2
D55088: RNCC: 5 | RNVC: 2
8036059: RNCC: 5 | RNVC: 9

4 Oct 2003

3040-01-514-1759
Control Cam

015141759
9G7350: RNCC: 3 | RNVC: 2

20 Oct 2003

3040-01-514-7373
Shouldered Shaft

015147373
21364-1002-1: RNCC: 3 | RNVC: 2
21364 FIND 5: RNCC: 5 | RNVC: 9

4 Nov 2003

3040-01-514-7388
Shouldered Shaft

015147388
21361-1003-1: RNCC: 3 | RNVC: 2
21361 FIND 7: RNCC: 5 | RNVC: 2

4 Nov 2003

3040-01-515-0196
Cushion Adj Needle

015150196
A-83239: RNCC: 3 | RNVC: 2
83239: RNCC: 5 | RNVC: 2

13 Nov 2003

3040-01-515-2148
Cylinder Mounti Rod

015152148
3332978: RNCC: 3 | RNVC: 2
3332978: RNCC: 3 | RNVC: 9

18 Nov 2003

3040-01-515-6916
Linear Actuating Cylinder

015156916
R433008142: RNCC: 3 | RNVC: 2
C194065 REV A C 194065-3960: RNCC: 5 | RNVC: 2
173734: RNCC: 5 | RNVC: 2
C194065-3960: RNCC: 5 | RNVC: 9
C194065-3960: RNCC: 5 | RNVC: 9

4 Dec 2003

3040-01-516-5825
Straight Shaft

015165825
5861282: RNCC: 3 | RNVC: 2
2080327: RNCC: 5 | RNVC: 9
4419266: RNCC: 5 | RNVC: 9
170-6678: RNCC: 5 | RNVC: 9

12 Jan 2004

3040-01-519-7266
Aircraft Guide Ring

015197266
21C8219P36: RNCC: 3 | RNVC: 2
21C8219P36: RNCC: 3 | RNVC: 9

29 Apr 2004

3040-01-518-7134
Linear Actuating Cylinder Assembly

015187134
AD35540-2: RNCC: 3 | RNVC: 2
AD35540: RNCC: 5 | RNVC: 2

20 Mar 2004

3040-01-520-3245
Housing Adapter

015203245
ENERPAC GA-3: RNCC: 3 | RNVC: 1
ENERPAC GA-3: RNCC: 5 | RNVC: 2
GA-3: RNCC: 5 | RNVC: 2
GA-3: RNCC: 5 | RNVC: 2
809529ITEM18: RNCC: 5 | RNVC: 9

7 May 2004

3040-01-520-3514
Manual Control Lever

015203514
7264921-002: RNCC: 3 | RNVC: 2
7264921-002: RNCC: 5 | RNVC: 9

10 May 2004

3040-01-520-6757
Bell Crank

015206757
64379: RNCC: 3 | RNVC: 2

21 May 2004

3040-01-521-0147
Flexible Drive Shaft

015210147
1606880-0156: RNCC: 3 | RNVC: 2
2102211 SH 45 ITEM NO 1: RNCC: 5 | RNVC: 2

7 Jun 2004

3040-01-520-6770
Multiple Gears Gearshaft

015206770
76346-F-2: RNCC: 3 | RNVC: 2
76346-F-2: RNCC: 3 | RNVC: 9
76346-F-2: RNCC: 5 | RNVC: 2

21 May 2004

3040-01-522-8068
Brake Drum Adapter

015228068
14026: RNCC: 3 | RNVC: 2
26KP499: RNCC: 5 | RNVC: 2
26KP499: RNCC: 5 | RNVC: 9

12 Aug 2004

3040-01-523-0401
Linear Actuating Cylinder Piston Rod

015230401
20015086-10: RNCC: 3 | RNVC: 2
20015086-10: RNCC: 3 | RNVC: 9
20015086-10: RNCC: 5 | RNVC: 2
20015086: RNCC: D | RNVC: 9

18 Aug 2004

3040-01-523-3663
Mechanically Actuated Spindle

015233663
EJ-21266: RNCC: 3 | RNVC: 2
EJ-52031 ITEM 2: RNCC: 5 | RNVC: 2
EJ-22286: RNCC: 5 | RNVC: 2

31 Aug 2004

3040-01-522-2179
Pawl

015222179
A109241-101-11: RNCC: 3 | RNVC: 2
A107950-101-11, ITEM 62: RNCC: 5 | RNVC: 2
A109241-101-11: RNCC: 5 | RNVC: 9
A107950-101-11, ITEM 62: RNCC: 5 | RNVC: 9

22 Jul 2004

3040-01-522-3462
Control Cam

015223462
P12619141: RNCC: 3 | RNVC: 2
P12619141: RNCC: 3 | RNVC: 9

28 Jul 2004

3040-01-525-0768
Flexible Shaft Assembly Casing

015250768
10053603: RNCC: 3 | RNVC: 2
223F435: RNCC: 7 | RNVC: 1

27 Oct 2004

3040-01-526-8318
Shouldered Shaft Assembly

015268318
9893508G9: RNCC: 3 | RNVC: 2
9893508G009: RNCC: 5 | RNVC: 2

8 Jan 2005

3040-01-458-1501
Grease Cap

014581501
845-7069126-X-2: RNCC: 3 | RNVC: 1

14 Aug 1998

3040-01-458-9046
Linear Actuating Cylinder Assembly

014589046
6-372-004357: RNCC: 3 | RNVC: 2

15 Sep 1998

3040-01-459-1016
Straight Shaft

014591016
342-6726633 FIND 9: RNCC: 3 | RNVC: 2

21 Sep 1998

3040-01-459-5141
Control Cable Assembly

014595141
CMG/128214: RNCC: 3 | RNVC: 2
128214: RNCC: 3 | RNVC: 9
407928: RNCC: 5 | RNVC: 9

5 Oct 1998

3040-01-460-1600
Hydraulic Accumulator Bladder

014601600
190.302-00225: RNCC: 3 | RNVC: 2
163301: RNCC: 5 | RNVC: 9
163301: RNCC: 5 | RNVC: 9

28 Oct 1998

3040-01-460-0655
Straight Axle

014600655
9383165-1: RNCC: 3 | RNVC: 2

23 Oct 1998

3040-01-461-3370
Spur Gearshaft

014613370
706017-9X: RNCC: 3 | RNVC: 2
23713X-2: RNCC: 3 | RNVC: 9

9 Dec 1998

3040-01-461-9014
Linear Actuating Cylinder Assembly

014619014
1H2H0A00265269: RNCC: 3 | RNVC: 2
1.50CF/H-2HLTVS13C X 77.000: RNCC: 5 | RNVC: 1
1H000020804: RNCC: 5 | RNVC: 9
5038013: RNCC: 5 | RNVC: 9
AG189982B0: RNCC: 5 | RNVC: 9

11 Jan 1999

3040-01-462-1286
Linear Actuating Cylinder Piston

014621286
24205250: RNCC: 3 | RNVC: 2
5714964: RNCC: 5 | RNVC: 2
24205250: RNCC: 5 | RNVC: 9
3040PL0848646: RNCC: 6 | RNVC: 9

21 Jan 1999

3040-01-468-1493
Shouldered Shaft

014681493
793574-5: RNCC: 3 | RNVC: 2

30 Sep 1999

3040-01-468-8586
Straight Shaft

014688586
3T-4568: RNCC: 3 | RNVC: 9

25 Oct 1999

3040-01-469-6991
Nonrotating Shaft Eye Bracket

014696991
803-6397269 PC162: RNCC: 3 | RNVC: 2
6397269: RNCC: D | RNVC: 9

19 Nov 1999

3040-01-469-9365
Rigid Connecting Link

014699365
805-1623943 PC 23: RNCC: 3 | RNVC: 2
803-1041890 PC 49: RNCC: 3 | RNVC: 2
803-1623943 PC PC 23: RNCC: 5 | RNVC: 2
1041890: RNCC: D | RNVC: 9
805-1623943: RNCC: D | RNVC: 9
1623943: RNCC: D | RNVC: 9

1 Dec 1999

3040-01-470-2408
Mechanically Actuated Spindle

014702408
124-4366739 PC 18: RNCC: 3 | RNVC: 2
124-4366739: RNCC: D | RNVC: 9

13 Dec 1999

3040-01-470-3906
Flexible Drive Shaft

014703906
32880: RNCC: 3 | RNVC: 2

17 Dec 1999

3040-01-470-5504
Manual Control Lever

014705504
10123001120: RNCC: 3 | RNVC: 2
20158-31: RNCC: 5 | RNVC: 2
A10123.001.120: RNCC: 5 | RNVC: 9
20158: RNCC: D | RNVC: 9

23 Dec 1999

3040-01-462-6819
Shouldered Shaft

014626819
739784: RNCC: 3 | RNVC: 2

12 Feb 1999

3040-01-463-1825
Shouldered Shaft

014631825
151-1789: RNCC: 3 | RNVC: 2
151-1789: RNCC: 5 | RNVC: 9

10 Mar 1999

3040-01-462-9974
Rigid Connecting Link

014629974
741085A00: RNCC: 3 | RNVC: 2
741085-A: RNCC: 5 | RNVC: 9
8-35-5: RNCC: 5 | RNVC: 9

1 Mar 1999

3040-01-463-2814
Rigid Connecting Link

014632814
741096-A: RNCC: 3 | RNVC: 2
8-24-20: RNCC: 5 | RNVC: 2
741096A00: RNCC: 5 | RNVC: 2

15 Mar 1999

3040-01-464-0549
Rigid Connecting Link

014640549
803-6397268 PC 54: RNCC: 3 | RNVC: 2
803-6397269 PC 28: RNCC: 5 | RNVC: 2
6397268: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9

14 Apr 1999

3040-01-464-0751
Multiple Disk Brake

014640751
90B2A3G067: RNCC: 3 | RNVC: 2

15 Apr 1999

3040-01-464-1024
Shouldered Shaft

014641024
90-004-1043: RNCC: 3 | RNVC: 2

15 Apr 1999

3040-01-465-0133
Linear Actuating Cylinder Piston

014650133
39767: RNCC: 3 | RNVC: 2
30093-37175 ITEM 7: RNCC: 5 | RNVC: 2

19 May 1999

3040-01-465-5231
Nonrotating Shaft Eye Bracket

014655231
12465410: RNCC: 3 | RNVC: 2
12465410: RNCC: 5 | RNVC: 9

11 Jun 1999

3040-01-466-2050
Linear Actuating Cylinder Cap

014662050
845-7069127-X-10: RNCC: 3 | RNVC: 1

9 Jul 1999

3040-01-467-7968
Linear Actuating Cylinder Assembly

014677968
AG201171A0: RNCC: 3 | RNVC: 2

15 Sep 1999

3040-01-473-6313
Straight Shaft

014736313
13495162: RNCC: 3 | RNVC: 2
13588726: RNCC: 5 | RNVC: 2
MIS-PRF-53514: RNCC: 5 | RNVC: 9

12 Apr 2000

3040-01-474-4834
Control Cam

014744834
RE56578: RNCC: 3 | RNVC: 9

4 May 2000

3040-01-475-3039
Spur Gearshaft

014753039
12462851: RNCC: 3 | RNVC: 2

31 May 2000

3040-01-475-5020
Rigid Connecting Link

014755020
124-4322615 PC 19: RNCC: 3 | RNVC: 2
4322615: RNCC: D | RNVC: 9

6 Jun 2000

3040-01-475-6622
Rigid Connecting Link

014756622
845-6655309 ITEM 5-2: RNCC: 3 | RNVC: 2
2640-682-09 ITEM 5-2: RNCC: 5 | RNVC: 2
2640-682-09: RNCC: D | RNVC: 9
6655309: RNCC: D | RNVC: 9

8 Jun 2000

3040-01-477-1876
Shaft Retaining Plate

014771876
9904101298: RNCC: 3 | RNVC: 2

2 Aug 2000

3040-01-477-1295
Piston Ring

014771295
9904105953: RNCC: 3 | RNVC: 2

1 Aug 2000

3040-01-477-2915
Multiple Gears Gearshaft

014772915
9904106129: RNCC: 3 | RNVC: 2

4 Aug 2000

3040-01-477-5051
Shouldered Shaft

014775051
8100-1253-0238 PT NO 614: RNCC: 3 | RNVC: 2
CATALOG NO. 43110-136: RNCC: 3 | RNVC: 2
8100-1251-0192 PC 91: RNCC: 3 | RNVC: 2
8100-1251-0192: RNCC: D | RNVC: 9

10 Aug 2000

3040-01-478-0526
Linear Actuating Cylinder Assembly

014780526
6372005774: RNCC: 3 | RNVC: 2

29 Aug 2000

3040-01-479-5579
Mechanically Actuated Spindle

014795579
44227-037: RNCC: 3 | RNVC: 2
8100-1256-0305 PC NO 27: RNCC: 5 | RNVC: 2
8100-1256-0305: RNCC: D | RNVC: 9

25 Oct 2000

3040-01-479-9532
Straight Shaft

014799532
12416455: RNCC: 3 | RNVC: 2
12416455: RNCC: 5 | RNVC: 2
12416455: RNCC: 5 | RNVC: 2

2 Nov 2000

3040-01-479-8411
Straight Shaft

014798411
LG2020-10: RNCC: 3 | RNVC: 2
LG1930-01 ITEM 3: RNCC: 5 | RNVC: 2
LG1930-01: RNCC: D | RNVC: 9

31 Oct 2000

3040-01-480-7591
Spur Gearshaft

014807591
5714954: RNCC: 3 | RNVC: 2
24204291: RNCC: 3 | RNVC: 9
24241428: RNCC: 5 | RNVC: 2
3040PL0739466: RNCC: 6 | RNVC: 9

5 Dec 2000

3040-01-480-4797
Linear Actuating Cylinder Piston

014804797
08661271: RNCC: 3 | RNVC: 2
8661271: RNCC: 3 | RNVC: 2
5714304: RNCC: 5 | RNVC: 2
3040PL1970214: RNCC: 6 | RNVC: 9

22 Nov 2000

3040-01-481-2251
Shouldered Shaft

014812251
8100-1253-0238 PT NO 571: RNCC: 3 | RNVC: 2
8100-1253-0238: RNCC: D | RNVC: 9

22 Dec 2000

3040-01-481-6383
Airc Spur Gearshaft

014816383
10052679: RNCC: 3 | RNVC: 2

18 Jan 2001

3040-01-482-1093
Stroke Assembly

014821093
12446283: RNCC: 3 | RNVC: 2

8 Feb 2001

3040-01-482-4754
Rigid Connecting Link

014824754
8100-1251-0192 PC 138: RNCC: 3 | RNVC: 2
8100-1251-0307 PC NO 71: RNCC: 3 | RNVC: 2
6397269: RNCC: D | RNVC: 9
8100-1251-0192: RNCC: D | RNVC: 9
8100-1251-0307: RNCC: D | RNVC: 9

23 Feb 2001

3040-01-482-4451
Electrical-Fluid Pressure Connector Assembly

014824451
9333102418: RNCC: 3 | RNVC: 9
9333102418: RNCC: 5 | RNVC: 2

22 Feb 2001

3040-01-483-1829
Straight Shaft Assembly

014831829
16101551-011: RNCC: 3 | RNVC: 2
16101551-011: RNCC: 5 | RNVC: 2
16101551-011: RNCC: 5 | RNVC: 2

19 Mar 2001

3040-01-484-7330
Straight Shaft

014847330
122-6776889 PC 10: RNCC: 3 | RNVC: 2
6776889: RNCC: D | RNVC: 9

7 May 2001

3040-01-492-6439
Counterbalance Weight

014926439
5D88089-007: RNCC: 3 | RNVC: 2
6512E29FN55: RNCC: 5 | RNVC: 2
6512E29: RNCC: D | RNVC: 9

7 Dec 2001

3040-01-494-4691
Manual Control Lever

014944691
6593000094: RNCC: 3 | RNVC: 2

13 Feb 2002

3040-01-494-9108
Rigid Connecting Link

014949108
196800-K1: RNCC: 3 | RNVC: 2

27 Feb 2002

3040-01-485-0779
Remote Control Lever

014850779
064-47482-005: RNCC: 3 | RNVC: 2
364-48946-000 ITEM 103: RNCC: 5 | RNVC: 9
064-47482B005: RNCC: 5 | RNVC: 9

16 May 2001

3040-01-494-9021
Manual Control Lever

014949021
715178-B: RNCC: 3 | RNVC: 2

27 Feb 2002

3040-01-485-5378
Pawl

014855378
741247-A: RNCC: 3 | RNVC: 2
8-25-15: RNCC: D | RNVC: 9

30 May 2001

3040-01-485-9609
Shouldered Shaft

014859609
167-7066804-70: RNCC: 3 | RNVC: 2
H547-2002-70: RNCC: 5 | RNVC: 2
7066804: RNCC: D | RNVC: 9

13 Jun 2001

3040-01-488-7680
Rigid Connecting Link

014887680
124-7386936 PC 41: RNCC: 3 | RNVC: 2
124-7386972 PC 67: RNCC: 5 | RNVC: 2
124-7386936: RNCC: D | RNVC: 9
124-7386972: RNCC: D | RNVC: 9

4 Sep 2001

3040-01-488-7452
Bell Crank Support

014887452
1276M85P02: RNCC: 3 | RNVC: 2

31 Aug 2001

3040-01-486-4705
Shouldered Shaft

014864705
342-7067322-72: RNCC: 3 | RNVC: 2
H643-7003-72: RNCC: 5 | RNVC: 2
H643-7003: RNCC: D | RNVC: 9
7067322: RNCC: D | RNVC: 9

29 Jun 2001

3040-01-491-0581
Rigid Connecting Link

014910581
160D920114-1: RNCC: 3 | RNVC: 9
160D920114-1: RNCC: 5 | RNVC: 9
160D920114-1: RNCC: C | RNVC: 1
160D920114: RNCC: D | RNVC: 9

11 Oct 2001

3040-01-490-4923
Adapter Hoist Ring

014904923
4D09723-001: RNCC: 3 | RNVC: 2
6510E71FN94: RNCC: 5 | RNVC: 9
4D09723: RNCC: D | RNVC: 9
6510E71: RNCC: D | RNVC: 9

28 Sep 2001

3040-01-497-0345
Rotating Shaft Eye Bracket

014970345
239963: RNCC: 3 | RNVC: 2
CMG 239963: RNCC: 5 | RNVC: 2

7 May 2002

3040-01-497-0413
Shouldered Shaft

014970413
3000282: RNCC: 3 | RNVC: 2
3000282: RNCC: 5 | RNVC: 9

7 May 2002

3040-01-497-3012
Straight Shaft

014973012
4102382-1: RNCC: 3 | RNVC: 2
4102382-1: RNCC: 5 | RNVC: 2
4101105-1 FIND 3: RNCC: 5 | RNVC: 9
4101104-1 FIND 118: RNCC: 5 | RNVC: 9

16 May 2002

3040-01-498-1885
Linear Actuating Cylinder Assembly Parts Kit

014981885
1643601: RNCC: 3 | RNVC: 2
1643813: RNCC: 5 | RNVC: 9
404940: RNCC: 5 | RNVC: 9

18 Jun 2002

3040-01-498-2038
Rigid Connecting Link

014982038
154061: RNCC: 3 | RNVC: 2

18 Jun 2002

3040-01-500-8363
Remote Control Lever

015008363
V7D10120-01: RNCC: 3 | RNVC: 2
V1E10517-01 ITEM 4: RNCC: 5 | RNVC: 2
V1E10602-01 ITEM 27: RNCC: 5 | RNVC: 2
V1E10517: RNCC: D | RNVC: 9
V1E10602: RNCC: D | RNVC: 9

12 Sep 2002

3040-01-500-6207
Counterbalance Weight

015006207
114R1737-5: RNCC: 3 | RNVC: 2
114R1737: RNCC: D | RNVC: 9

4 Sep 2002

3040-01-500-4292
Rigid Connecting Link

015004292
70400-02291-115: RNCC: 3 | RNVC: 2
3040PL1938768: RNCC: 6 | RNVC: 9

26 Aug 2002

3040-01-502-2438
Mechanically Actuated Spindle

015022438
2217-0004: RNCC: 3 | RNVC: 2

29 Oct 2002

3040-01-502-2969
Shouldered Shaft

015022969
512-7067304-24: RNCC: 3 | RNVC: 2
H643-2612-24: RNCC: 5 | RNVC: 2
34-26-7820: RNCC: 5 | RNVC: 2
7067304: RNCC: D | RNVC: 9

31 Oct 2002

3040-01-503-3779
Worm Shaft

015033779
1321255: RNCC: 3 | RNVC: 2
4475338033: RNCC: 5 | RNVC: 9
1321255: RNCC: 5 | RNVC: 9

13 Dec 2002

3040-01-503-6467
Rigid Connecting Link

015036467
6623518: RNCC: 3 | RNVC: 2
6623518: RNCC: 5 | RNVC: 9

2 Jan 2003

3040-01-503-6818
Rotating Shaft Eye Bracket

015036818
975939: RNCC: 3 | RNVC: 2
975939: RNCC: 3 | RNVC: 9
975939: RNCC: 5 | RNVC: 9

3 Jan 2003

3040-01-504-2956
Rigid Connecting Link

015042956
8036364: RNCC: 3 | RNVC: 2
8036364: RNCC: 5 | RNVC: 9

24 Jan 2003

3040-01-504-3919
Linear Actuating Cylinder Piston Rod

015043919
8035758: RNCC: 3 | RNVC: 2
8035758: RNCC: 5 | RNVC: 9

28 Jan 2003

3040-01-504-0008
Bracket Housing

015040008
6623431: RNCC: 3 | RNVC: 2
6623431: RNCC: 5 | RNVC: 9

15 Jan 2003

3040-01-506-9704
Hydraulic Control Assembly

015069704
185-5898: RNCC: 3 | RNVC: 2

15 Apr 2003

3040-01-507-3497
Control Cam Assembly

015073497
166-9413: RNCC: 3 | RNVC: 2
166-9413: RNCC: 5 | RNVC: 2
166-9413: RNCC: 5 | RNVC: 2
166-9413: RNCC: 5 | RNVC: 2

25 Apr 2003

3040-01-506-9494
Spline Adapter

015069494
7-511B11134-001: RNCC: 1 | RNVC: 2
2050261-1: RNCC: 3 | RNVC: 2
208-31300-01: RNCC: 5 | RNVC: 2

15 Apr 2003

3040-01-507-7897
Body Hub

015077897
209 450: RNCC: 3 | RNVC: 2
209 450: RNCC: 3 | RNVC: 9

6 May 2003

3040-01-508-6581
Worm Shaft

015086581
596-7409253-24: RNCC: 3 | RNVC: 2
596-7410365-79: RNCC: 5 | RNVC: 2
B434-8205-79: RNCC: 5 | RNVC: 2
B434-8212-24: RNCC: 5 | RNVC: 2
7409253: RNCC: D | RNVC: 9
7410365: RNCC: D | RNVC: 9

29 May 2003

3040-01-508-6623
Worm Shaft

015086623
596-7409253-23: RNCC: 3 | RNVC: 2
B434-8205-21: RNCC: 5 | RNVC: 2
596-7410365-21: RNCC: 5 | RNVC: 2
B434-8212-23: RNCC: 5 | RNVC: 2
596-7409253-21: RNCC: C | RNVC: 1
7410365: RNCC: D | RNVC: 9
7409253: RNCC: D | RNVC: 9

29 May 2003

3040-01-507-4030
Controllable Swashplate

015074030
713201: RNCC: 3 | RNVC: 2

28 Apr 2003

3040-01-509-6112
Shouldered Shaft

015096112
11447564-002: RNCC: 3 | RNVC: 2

26 Jun 2003

3040-01-510-7553
Shouldered Shaft Assembly

015107553
3429AS2110-1: RNCC: 3 | RNVC: 2
3429AS0160 FIND 9: RNCC: 5 | RNVC: 1
3429AS2110-1: RNCC: 5 | RNVC: 2
3429AS2110-1: RNCC: 5 | RNVC: 2
3429AS2110-1: RNCC: 5 | RNVC: 2
3429AS2110: RNCC: D | RNVC: 9

25 Jul 2003

3040-01-512-7432
Linear Actuating Cylinder

015127432
3335224: RNCC: 3 | RNVC: 2
3335224: RNCC: 3 | RNVC: 9
61379-1: RNCC: 5 | RNVC: 2

9 Sep 2003

3040-01-513-0915
Linear Actuating Cylinder Assembly Parts Kit

015130915
1 1/2HSPKV-2: RNCC: 3 | RNVC: 2
21903269 IT 1,3,5,10,13,18: RNCC: 5 | RNVC: 2
21903269: RNCC: D | RNVC: 9

17 Sep 2003

3040-01-513-5195
Control Cam

015135195
3035-558: RNCC: 3 | RNVC: 2

29 Sep 2003

3040-01-513-5719
Mechanical Drive Housing

015135719
RR34152-1: RNCC: 3 | RNVC: 2

30 Sep 2003

3040-01-514-0018
Push-Pull Control Assembly

015140018
CC33214: RNCC: 3 | RNVC: 2
CC63314: RNCC: 5 | RNVC: 9
CX3314: RNCC: 5 | RNVC: 9
10481102: RNCC: 6 | RNVC: 9

14 Oct 2003

3040-01-514-0036
Push-Pull Control Assembly

015140036
CCX3309: RNCC: 3 | RNVC: 2
CC63309: RNCC: 5 | RNVC: 9

14 Oct 2003

3040-01-514-1764
Straight Shaft Assembly

015141764
1755046: RNCC: 3 | RNVC: 2

20 Oct 2003

3040-01-514-7366
Shouldered Shaft

015147366
21155-1001-1: RNCC: 3 | RNVC: 2
21155 FIND 5: RNCC: 5 | RNVC: 2

4 Nov 2003

3040-01-515-0844
Mechanical Drive Housing Part

015150844
3195225: RNCC: 3 | RNVC: 2
3195225: RNCC: 5 | RNVC: 9

14 Nov 2003

3040-01-515-1803
Grpr Bracket Assy

015151803
B434-5219-A1: RNCC: 3 | RNVC: 2
596-7410504-2: RNCC: 5 | RNVC: 2
B434-5217-2: RNCC: 5 | RNVC: 2
596-7410506-A1: RNCC: 7 | RNVC: 2
7410506: RNCC: D | RNVC: 9

18 Nov 2003

3040-01-515-1815
Rigid Connecting Link

015151815
1KK283: RNCC: 3 | RNVC: 2
1KK283: RNCC: 3 | RNVC: 9
6502953: RNCC: 5 | RNVC: 9

18 Nov 2003

3040-01-514-7367
Shouldered Shaft

015147367
21150-1002-1: RNCC: 3 | RNVC: 2
21150 FIND 12: RNCC: 5 | RNVC: 2

4 Nov 2003

3040-01-515-2332
Mechanically Actuated Spindle

015152332
8100-1251-0298 PT. NO. 314: RNCC: 3 | RNVC: 2
8100-1251-0298 PT. NO. 314: RNCC: 5 | RNVC: 2

19 Nov 2003

3040-01-516-5279
Flexible Shaft Assembly

015165279
57353-74: RNCC: 3 | RNVC: 2

9 Jan 2004

3040-01-516-9266
Linear Actuating Cylinder Assembly

015169266
2HA956: RNCC: 3 | RNVC: 2
2HA956: RNCC: 3 | RNVC: 9
4900213-003: RNCC: 5 | RNVC: 2

26 Jan 2004

3040-01-516-6449
Shouldered Shaft

015166449
3637AS683-3: RNCC: 3 | RNVC: 2
3637AS683: RNCC: D | RNVC: 9

14 Jan 2004

3040-01-517-7467
Bolt Carrier Guide Rod

015177467
465-0159-2: RNCC: 3 | RNVC: 9
465-0159-2: RNCC: 5 | RNVC: 2
465-0159-2: RNCC: C | RNVC: 1

18 Feb 2004

3040-01-518-2474
Linear Actuating Cylinder Assembly Parts Kit

015182474
01510-7-60: RNCC: 3 | RNVC: 2
C-18658 PL: RNCC: 5 | RNVC: 9
C-18658: RNCC: 5 | RNVC: 9

5 Mar 2004

3040-01-518-5004
Shouldered Shaft

015185004
A62401-LPD-007 PC 52: RNCC: 3 | RNVC: 2
803-5184174 PC 53: RNCC: 5 | RNVC: 2

15 Mar 2004

3040-01-518-7534
Mechanically Actuated Spindle

015187534
A62402-LPD-138 PC9: RNCC: 3 | RNVC: 2
A62402-LPD-138 DETAIL 12-C: RNCC: 5 | RNVC: 2

23 Mar 2004

3040-01-520-9055
Shouldered Shaft

015209055
347-0652: RNCC: 3 | RNVC: 9
4KK527: RNCC: 5 | RNVC: 2
347-0652: RNCC: 5 | RNVC: 2
4KK527: RNCC: 5 | RNVC: 9
496-3130: RNCC: 5 | RNVC: 9

2 Jun 2004

3040-01-520-9571
Worm Wheel Gearshaft

015209571
B434-8310-4: RNCC: 3 | RNVC: 2
596-7409258-4: RNCC: 5 | RNVC: 1
8MX-30S-12-PB: RNCC: 5 | RNVC: 2

3 Jun 2004

3040-01-521-9280
Flexible Drive Shaft

015219280
106-0417: RNCC: 3 | RNVC: 2
506-3005 PC. NO. 41: RNCC: 5 | RNVC: 2

12 Jul 2004

3040-01-522-0719
Manual Control Lever

015220719
5821-26-005: RNCC: 3 | RNVC: 2
5909: RNCC: 5 | RNVC: 9

16 Jul 2004

3040-01-521-7993
Straight Shaft

015217993
12484455: RNCC: 3 | RNVC: 2
10309416: RNCC: 6 | RNVC: 9

6 Jul 2004

3040-01-522-5322
Nonaircraft Mechanical Actuator

015225322
058053: RNCC: 3 | RNVC: 2
FIG 7-3-81/5: RNCC: 5 | RNVC: 1
058053: RNCC: 5 | RNVC: 2

3 Aug 2004

3040-01-523-0416
Ring And Pinion Set

015230416
3000227: RNCC: 3 | RNVC: 2
3000227: RNCC: 5 | RNVC: 9

18 Aug 2004

3040-01-523-3644
Linear Actuating Cylinder Assembly

015233644
C-18656: RNCC: 3 | RNVC: 2

31 Aug 2004

3040-01-523-7200
Shouldered Shaft

015237200
14229: RNCC: 3 | RNVC: 2
4100670: RNCC: 5 | RNVC: 2
4100670: RNCC: 5 | RNVC: 9
14229: RNCC: 5 | RNVC: 9

14 Sep 2004

3040-01-525-1894
Straight Shaft

015251894
6828-151-000: RNCC: 3 | RNVC: 2
12326PL FIND NO 5: RNCC: 5 | RNVC: 2

30 Oct 2004

3040-01-525-3134
Shouldered Shaft

015253134
M27780004: RNCC: 3 | RNVC: 2
B13320004 ITEM 7: RNCC: 5 | RNVC: 9

3 Nov 2004

3040-01-525-7703
Shouldered Shaft

015257703
9-65154-3: RNCC: 3 | RNVC: 2

23 Nov 2004

3040-01-526-5122
Flexible Shaft Assembly

015265122
57353-20FT0IN: RNCC: 3 | RNVC: 2

21 Dec 2004

3040-01-526-5813
Shouldered Shaft Assembly

015265813
1001966-1: RNCC: 3 | RNVC: 2
1001966: RNCC: D | RNVC: 9

23 Dec 2004

3040-01-484-6559
Shaft Retaining Plate

014846559
3064582: RNCC: 3 | RNVC: 2

3 May 2001

3040-01-484-6623
Shaft Idler

014846623
3026166: RNCC: 3 | RNVC: 2

3 May 2001

3040-01-494-9110
Rigid Connecting Link

014949110
196801-B: RNCC: 3 | RNVC: 2

27 Feb 2002

3040-01-485-6423
Linear Actuating Cylinder Assembly Parts Kit

014856423
PK322HK001: RNCC: 3 | RNVC: 2

1 Jun 2001

3040-01-496-0332
Cable Guide

014960332
07.0703.0271: RNCC: 3 | RNVC: 9
07.0703.0271: RNCC: 5 | RNVC: 2

29 Mar 2002

3040-01-511-6471
Mechanical Drive Housing

015116471
02368003: RNCC: 3 | RNVC: 2

13 Aug 2003

3040-01-511-6454
Mechanical Drive Housing

015116454
02368002: RNCC: 3 | RNVC: 2

13 Aug 2003

3040-01-462-9929
Bell Crank

014629929
741205-K1: RNCC: 3 | RNVC: 2
8-38-14: RNCC: 5 | RNVC: 2
741205K01: RNCC: 5 | RNVC: 2

1 Mar 1999

3040-01-486-0602
Linear Actuating Cylinder Assembly Parts Kit

014860602
L073720124: RNCC: 3 | RNVC: 2

18 Jun 2001

3040-01-487-7013
Nonaircraft Mechanical Actuator

014877013
17-2-0529-1: RNCC: 3 | RNVC: 2
DC11024-300-024: RNCC: 5 | RNVC: 2
DYNC-11024-300-0-24: RNCC: 5 | RNVC: 9

14 Aug 2001

3040-01-488-9289
Tine Cylinder

014889289
50001196: RNCC: 3 | RNVC: 2

6 Sep 2001

3040-01-518-5312
Pinion Gear Set

015185312
8KP483: RNCC: 3 | RNVC: 2
29507806: RNCC: 5 | RNVC: 9
8KP483: RNCC: 5 | RNVC: 9

16 Mar 2004

3040-01-519-8774
Rigid Connecting Link

015198774
5HE816: RNCC: 3 | RNVC: 2
5HE816: RNCC: 3 | RNVC: 9
VPLFHAK3: RNCC: 5 | RNVC: 2

5 May 2004

3040-01-520-9141
Flexible Shaft Assembly

015209141
596-7410500-35: RNCC: 3 | RNVC: 2
B4345111A-35: RNCC: 5 | RNVC: 2
B4345111-35: RNCC: 5 | RNVC: 9

2 Jun 2004

3040-01-517-3699
Vehicular Door Handle

015173699
15-0864: RNCC: 3 | RNVC: 2

6 Feb 2004

3040-01-521-9234
Shouldered Shaft

015219234
106-6012: RNCC: 3 | RNVC: 2
506-3005 PC. NO. 9: RNCC: 5 | RNVC: 2

12 Jul 2004

3040-01-517-8453
Control Cam

015178453
13005084: RNCC: 3 | RNVC: 2

20 Feb 2004

3040-01-459-7676
Shouldered Shaft

014597676
8100-1251-0192 PC 127: RNCC: 3 | RNVC: 2
8100-1251-0192: RNCC: D | RNVC: 9

14 Oct 1998

3040-01-461-3336
Rigid Connecting Link

014613336
1378AS283-1: RNCC: 3 | RNVC: 2

9 Dec 1998

3040-01-461-8057
Linear Actuating Cylinder Assembly

014618057
1H000172055: RNCC: 3 | RNVC: 2
3038028: RNCC: 5 | RNVC: 9
2.50CF/H-2HLTVS13CX87.000: RNCC: 5 | RNVC: 9
AG189986A0: RNCC: 5 | RNVC: 9

5 Jan 1999

3040-01-461-8669
Rigid Connecting Link

014618669
12462685: RNCC: 3 | RNVC: 2
12462685: RNCC: 5 | RNVC: 2
12462685: RNCC: 5 | RNVC: 9

8 Jan 1999

3040-01-461-8618
Linear Actuating Cylinder Assembly

014618618
1H2H0A00314931: RNCC: 3 | RNVC: 2
5038024: RNCC: 5 | RNVC: 9
2.00CC-2HLTVS14C X 6.625: RNCC: 5 | RNVC: 9
AG189983G0: RNCC: 5 | RNVC: 9

8 Jan 1999

3040-01-461-9686
Linear Actuating Cylinder Assembly

014619686
AG189986C0: RNCC: 3 | RNVC: 2
5038021: RNCC: 5 | RNVC: 9
2.500CFH2-HLTVS13X87.500: RNCC: 5 | RNVC: 9

13 Jan 1999

3040-01-461-1931
Shouldered Shaft

014611931
74D460607-2013: RNCC: 3 | RNVC: 2
74D460607-2013: RNCC: 5 | RNVC: 9

3 Dec 1998

3040-01-462-5029
Shouldered Shaft

014625029
3121881: RNCC: 3 | RNVC: 2
3121881: RNCC: 5 | RNVC: 9

5 Feb 1999

3040-01-462-1269
Linear Actuating Cylinder Assembly

014621269
AG189982A0: RNCC: 3 | RNVC: 2
1.50F-2HLTVS23 X 1.625: RNCC: 5 | RNVC: 9
5038002: RNCC: 5 | RNVC: 9

21 Jan 1999

3040-01-468-1486
Shouldered Shaft Assembly

014681486
814190-2: RNCC: 3 | RNVC: 2

30 Sep 1999

3040-01-468-4137
Straight Shaft

014684137
12366533: RNCC: 3 | RNVC: 2
12366533: RNCC: 5 | RNVC: 2

8 Oct 1999

3040-01-468-1674
Manual Control Lever Assembly

014681674
5006184: RNCC: 3 | RNVC: 2
176374: RNCC: 3 | RNVC: 9
176374: RNCC: 5 | RNVC: 9

30 Sep 1999

3040-01-469-1075
Body Hub

014691075
12462886: RNCC: 3 | RNVC: 2
12462886: RNCC: 5 | RNVC: 2

3 Nov 1999

3040-01-469-0399
Shouldered Shaft

014690399
2045719-3: RNCC: 3 | RNVC: 2
2045719-3: RNCC: 5 | RNVC: 2

1 Nov 1999

3040-01-469-2534
Rigid Connecting Link

014692534
11474335: RNCC: 3 | RNVC: 2
11474335: RNCC: 5 | RNVC: 2
11474335: RNCC: 5 | RNVC: 9
11474335: RNCC: D | RNVC: 9

9 Nov 1999

3040-01-470-1672
Rigid Connecting Link

014701672
124-4322615 PC 20: RNCC: 3 | RNVC: 2
4322615: RNCC: D | RNVC: 9

9 Dec 1999

3040-01-470-1704
Rigid Connecting Link

014701704
124-4322615 PC 18: RNCC: 3 | RNVC: 2
4322615: RNCC: D | RNVC: 9

9 Dec 1999

3040-01-470-9687
Gear Shaft

014709687
055370: RNCC: 3 | RNVC: 2
933B055370: RNCC: 5 | RNVC: 2

18 Jan 2000

3040-01-470-5811
Shaft Idler

014705811
23KP189: RNCC: 1 | RNVC: 2
200-4495: RNCC: 3 | RNVC: 2
CV133713: RNCC: 5 | RNVC: 2
200-4495: RNCC: 5 | RNVC: 2
1013207: RNCC: 5 | RNVC: 9

27 Dec 1999

3040-01-462-9702
Straight Shaft

014629702
707139-A: RNCC: 3 | RNVC: 2
8-19-9: RNCC: 5 | RNVC: 2
707139A00: RNCC: 5 | RNVC: 2

26 Feb 1999

3040-01-462-9695
Straight Shaft

014629695
707140A00: RNCC: 3 | RNVC: 2
8-18-9: RNCC: 5 | RNVC: 2
707140-A: RNCC: 5 | RNVC: 9

26 Feb 1999

3040-01-463-5811
Tracked Wheel

014635811
1137: RNCC: 3 | RNVC: 2
801-6336098 SHEET 57 ITEM 8: RNCC: 5 | RNVC: 2
6336098: RNCC: D | RNVC: 9

26 Mar 1999

3040-01-464-2813
Linear Actuating Cylinder Head

014642813
532110: RNCC: 3 | RNVC: 2

23 Apr 1999

3040-01-466-7916
Flexible Shaft Assembly

014667916
GTC-704-12: RNCC: 3 | RNVC: 2

2 Aug 1999

3040-01-472-7677
Brake Shoe

014727677
2C1-747: RNCC: 3 | RNVC: 2
2D3-621 ITEM 22: RNCC: 5 | RNVC: 2
2D3-621: RNCC: D | RNVC: 9

16 Mar 2000

3040-01-473-0302
Mechanically Actuated Spindle

014730302
124-4498686 PC 12: RNCC: 3 | RNVC: 2
124-4322609 PC 19B: RNCC: 5 | RNVC: 2
THREADS 1-3/4 5: RNCC: C | RNVC: 1
4322609: RNCC: D | RNVC: 9
4498686: RNCC: D | RNVC: 9

24 Mar 2000

3040-01-474-3408
Nonaircraft Mechanical Actuator

014743408
58302-00: RNCC: 3 | RNVC: 2
58302: RNCC: C | RNVC: 1

2 May 2000

3040-01-474-8799
Rigid Connecting Link

014748799
767255: RNCC: 3 | RNVC: 2

16 May 2000

3040-01-475-1365
Nonaircraft Mechanical Actuator

014751365
351293: RNCC: 3 | RNVC: 2

23 May 2000

3040-01-475-0929
Straight Shaft

014750929
S23-17253-0K: RNCC: 3 | RNVC: 2
033-57257: RNCC: 5 | RNVC: 9

22 May 2000

3040-01-474-8097
Mechanically Actuated Spindle

014748097
124-4322618 PC3: RNCC: 3 | RNVC: 2
124-4322618 PC 3B: RNCC: 5 | RNVC: 9
4322618: RNCC: D | RNVC: 9

12 May 2000

3040-01-475-2311
Shaft Collar

014752311
124-4322620 PC 8-90: RNCC: 3 | RNVC: 2
124-4322620 PC 8-95: RNCC: 3 | RNVC: 2
4322620: RNCC: D | RNVC: 9

25 May 2000

3040-01-474-9739
Planetary Gears Carrier

014749739
1023320: RNCC: 3 | RNVC: 9
AT218164: RNCC: 5 | RNVC: 9

18 May 2000

3040-01-475-8345
Shaft Retaining Plate

014758345
13496613: RNCC: 3 | RNVC: 2

14 Jun 2000

3040-01-476-7063
Rigid Connecting Link

014767063
6521-130: RNCC: 3 | RNVC: 2
74B428009-130: RNCC: 5 | RNVC: 2
74B428009-130: RNCC: 7 | RNVC: 2

20 Jul 2000

NSN 3040-01-478-0623 014780623 SHAFT ASSEMBLY,STRAIGHT

3040-01-478-0623
Straight Shaft Assembly

014780623
216717: RNCC: 3 | RNVC: 2

29 Aug 2000

3040-01-478-3132
Linear Actuating Cylinder Assembly

014783132
C613531: RNCC: 3 | RNVC: 2
C613531: RNCC: 5 | RNVC: 2
C613531: RNCC: 5 | RNVC: 9

6 Sep 2000

3040-01-478-7483
Piston Rod Guide

014787483
198281-0001: RNCC: 3 | RNVC: 2
284591-0001 ITEM 20: RNCC: 5 | RNVC: 2
284591-0001: RNCC: D | RNVC: 9

26 Sep 2000

3040-01-479-4580
Remote Control Lever

014794580
3HB873: RNCC: 3 | RNVC: 2
3HB873: RNCC: 3 | RNVC: 9
050040151: RNCC: 5 | RNVC: 2

21 Oct 2000

3040-01-480-7595
Brake Band And Lining

014807595
24202631: RNCC: 3 | RNVC: 2
5740294: RNCC: 5 | RNVC: 2
2520PL0665448: RNCC: 6 | RNVC: 9

5 Dec 2000

3040-01-481-0932
Control Cam

014810932
577778: RNCC: 3 | RNVC: 2

18 Dec 2000

3040-01-481-7365
Pawl

014817365
6929586: RNCC: 3 | RNVC: 2

23 Jan 2001

3040-01-482-3931
Shouldered Shaft

014823931
L6410384-003: RNCC: 3 | RNVC: 2
L6410384: RNCC: D | RNVC: 9

20 Feb 2001

3040-01-482-5003
Housing Adapter

014825003
3219798-1: RNCC: 3 | RNVC: 2
3219798-1: RNCC: 5 | RNVC: 9

26 Feb 2001

3040-01-482-9007
Rigid Connecting Link

014829007
8100-1251-0307 PC NO 89: RNCC: 3 | RNVC: 2
803-6397269 PC NO 63: RNCC: 5 | RNVC: 2
803-6397268 PC 89: RNCC: 5 | RNVC: 2
8100-1251-0307: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9
6397268: RNCC: D | RNVC: 9

8 Mar 2001

3040-01-483-5465
Control Cam

014835465
7225914: RNCC: 3 | RNVC: 2
D1417026: RNCC: 5 | RNVC: 2

2 Apr 2001

3040-01-483-7657
Shouldered Shaft

014837657
556-7068391-32: RNCC: 3 | RNVC: 2
H793-3201-32: RNCC: 5 | RNVC: 2
7068391: RNCC: D | RNVC: 9

6 Apr 2001

3040-01-484-1437
Shouldered Shaft

014841437
21727: RNCC: 3 | RNVC: 2

20 Apr 2001

3040-01-485-7187
Linear Actuating Cylinder Assembly

014857187
076-84441-000: RNCC: 3 | RNVC: 2
376-84430-000 ITEM 15: RNCC: 5 | RNVC: 2
376-84441-000: RNCC: C | RNVC: 1

5 Jun 2001

3040-01-486-0170
Shouldered Shaft

014860170
122-6776279 PC 1: RNCC: 3 | RNVC: 2
6776279: RNCC: D | RNVC: 9

14 Jun 2001

3040-01-491-5722
Flexible Shaft Assembly

014915722
22001-100 X 218IN: RNCC: 3 | RNVC: 2
22001-100 X 18FT 2IN: RNCC: 5 | RNVC: 2
B-409-22001-100: RNCC: 5 | RNVC: 9
22001: RNCC: D | RNVC: 9

25 Oct 2001

3040-01-492-9226
Linear Actuating Cylinder Piston

014929226
585-6726771-15: RNCC: 3 | RNVC: 2
DF2018-258#15: RNCC: 5 | RNVC: 2
6726771: RNCC: D | RNVC: 9

17 Dec 2001

3040-01-493-3422
Counterbalance Weight

014933422
5D87611-006: RNCC: 3 | RNVC: 2
6511E74FN35: RNCC: 5 | RNVC: 1

28 Dec 2001

3040-01-494-2884
Shouldered Shaft

014942884
006-6401001-300: RNCC: 3 | RNVC: 2

6 Feb 2002

3040-01-495-1788
Shouldered Shaft Assembly

014951788
983-WH11-401: RNCC: 3 | RNVC: 2

8 Mar 2002

3040-01-496-0963
Rigid Connecting Link

014960963
209-064-222-105: RNCC: 3 | RNVC: 2
209-064-222: RNCC: D | RNVC: 9

3 Apr 2002

3040-01-496-9289
Rigid Connecting Link

014969289
B-WT76F63SH81CRHS: RNCC: 3 | RNVC: 2

1 May 2002

3040-01-496-9415
Rigid Connecting Link

014969415
B-WT76F63SH81CRLS: RNCC: 3 | RNVC: 2

2 May 2002

3040-01-496-9416
Rigid Connecting Link

014969416
B-WT76F63SH82CRHS: RNCC: 3 | RNVC: 2

2 May 2002

3040-01-497-0670
Control Cam

014970670
90-228-1 ITEM 3: RNCC: 3 | RNVC: 2
D-3039: RNCC: 3 | RNVC: 9
90-228-1: RNCC: D | RNVC: 9

8 May 2002

3040-01-497-0996
Counterbalance Weight

014970996
5126T81P02: RNCC: 3 | RNVC: 2
5126T81P02: RNCC: 5 | RNVC: 9

9 May 2002

3040-01-497-0539
Bell Crank

014970539
754-7066812-58: RNCC: 3 | RNVC: 2
H553-1502-58: RNCC: 5 | RNVC: 2
754-7066812: RNCC: D | RNVC: 9

8 May 2002

3040-01-498-2126
Rigid Connecting Link

014982126
518-4457096-11: RNCC: 3 | RNVC: 2
2013-54-11: RNCC: 5 | RNVC: 2
518-4457096-12: RNCC: C | RNVC: 1
518-4457096: RNCC: D | RNVC: 9

19 Jun 2002

3040-01-498-2568
Aircraf Input Shaft

014982568
3637AS808-1: RNCC: 3 | RNVC: 2
3637AS808: RNCC: D | RNVC: 9

20 Jun 2002

3040-01-498-4299
Straight Shaft

014984299
518-4457096-56: RNCC: 3 | RNVC: 2
2013-54-56: RNCC: 5 | RNVC: 2
H600-2013-54-56: RNCC: 5 | RNVC: 2
518-4457096: RNCC: D | RNVC: 9

26 Jun 2002

3040-01-499-5980
Extension Shaft

014995980
752-7068459-88: RNCC: 3 | RNVC: 2
H832-1633-88: RNCC: 5 | RNVC: 2
7068459: RNCC: D | RNVC: 9

30 Jul 2002

3040-01-500-0739
Extension Shaft

015000739
04-TL-006: RNCC: 3 | RNVC: 2
04-TL-006: RNCC: 3 | RNVC: 9

13 Aug 2002

3040-01-500-3458
Nonaircraft Mechanical Actuator

015003458
LA40PTL: RNCC: 3 | RNVC: 2
LA40-42050: RNCC: D | RNVC: 9

22 Aug 2002

3040-01-500-9321
Remote Control Lever

015009321
12477639: RNCC: 3 | RNVC: 2
12477639: RNCC: 5 | RNVC: 2
12477639: RNCC: D | RNVC: 9

17 Sep 2002

3040-01-501-4204
Hydraulic Accumulator

015014204
47254: RNCC: 3 | RNVC: 2

1 Oct 2002

3040-01-501-9542
Shouldered Shaft

015019542
17-44167A 1: RNCC: 3 | RNVC: 2

22 Oct 2002

3040-01-502-1979
Shouldered Shaft

015021979
616707-3-A: RNCC: 3 | RNVC: 2
801624-551 PC NO. 31A: RNCC: 5 | RNVC: 2
801624-551: RNCC: D | RNVC: 9

29 Oct 2002

3040-01-502-7221
Linear Actuating Cylinder Assembly

015027221
30-024: RNCC: 3 | RNVC: 2
30-002 IT 4: RNCC: 5 | RNVC: 2

19 Nov 2002

3040-01-503-3188
Spur Gearshaft

015033188
29535235: RNCC: 3 | RNVC: 2
29535235: RNCC: 5 | RNVC: 2
5HA275: RNCC: 5 | RNVC: 2
5HA275: RNCC: 5 | RNVC: 9

12 Dec 2002

3040-01-503-4450
Linear Actuating Cylinder Assembly

015034450
H-HWCYL-COL: RNCC: 3 | RNVC: 9

18 Dec 2002

3040-01-503-6468
Rigid Connecting Link

015036468
6623519: RNCC: 3 | RNVC: 2
6623519: RNCC: 5 | RNVC: 9

2 Jan 2003

3040-01-503-6470
Rigid Connecting Link

015036470
6623521: RNCC: 3 | RNVC: 2
6623521: RNCC: 5 | RNVC: 9

2 Jan 2003

3040-01-503-7566
Body Hub

015037566
29542017: RNCC: 3 | RNVC: 2
5HA159: RNCC: 5 | RNVC: 2
29542017: RNCC: 5 | RNVC: 2
5HA159: RNCC: 5 | RNVC: 9
29505783: RNCC: 5 | RNVC: 9

7 Jan 2003

3040-01-505-1323
Linear Actuating Cylinder

015051323
100434: RNCC: 3 | RNVC: 2
25564: RNCC: 5 | RNVC: 9

24 Feb 2003

3040-01-505-9264
Worm Shaft

015059264
596-7409253-22: RNCC: 3 | RNVC: 2
596-7410365-68: RNCC: 5 | RNVC: 2
B434-8205-68: RNCC: 5 | RNVC: 2
B434-8212-22: RNCC: 5 | RNVC: 2
7410365: RNCC: D | RNVC: 9
7409253: RNCC: D | RNVC: 9

19 Mar 2003

3040-01-505-9359
Rigid Connecting Link

015059359
12422794: RNCC: 3 | RNVC: 2
12422794: RNCC: 5 | RNVC: 2
12422794: RNCC: 5 | RNVC: 2

19 Mar 2003

3040-01-507-7894
Spur Gearshaft

015077894
1703423: RNCC: 3 | RNVC: 2

6 May 2003

3040-01-511-9054
Spur Gearshaft

015119054
A32128-1: RNCC: 3 | RNVC: 2

19 Aug 2003

3040-01-513-3344
Spur Gearshaft

015133344
1962M38P03: RNCC: 3 | RNVC: 2
1962M38: RNCC: D | RNVC: 9

24 Sep 2003

3040-01-513-6271
Shouldered Shaft

015136271
3324978: RNCC: 3 | RNVC: 2
3324978: RNCC: 3 | RNVC: 9
920800-2623: RNCC: 5 | RNVC: 2

1 Oct 2003

3040-01-514-5122
Push-Pull Control Assembly

015145122
CC63332: RNCC: 3 | RNVC: 9
1165943: RNCC: 5 | RNVC: 2

28 Oct 2003

3040-01-514-7862
Straight Shaft Assembly

015147862
2T3557: RNCC: 3 | RNVC: 2

5 Nov 2003

3040-01-515-2066
Shouldered Shaft

015152066
1KK267: RNCC: 3 | RNVC: 2
1KK267: RNCC: 3 | RNVC: 9
6502845: RNCC: 5 | RNVC: 9

18 Nov 2003

3040-01-515-2088
Shouldered Shaft Assembly

015152088
1KK265: RNCC: 3 | RNVC: 2
1KK265: RNCC: 3 | RNVC: 9
6502825: RNCC: 5 | RNVC: 9

18 Nov 2003

3040-01-515-5182
Rigid Connecting Link

015155182
901-031-635-113: RNCC: 3 | RNVC: 2

27 Nov 2003

3040-01-515-7135
Elevating Actuator

015157135
13001768: RNCC: 3 | RNVC: 2

5 Dec 2003

3040-01-515-7246
Kit

015157246
R433033111: RNCC: 3 | RNVC: 2
P116545: RNCC: 5 | RNVC: 9
C194065 REF.5B,5C,5D,5E,5F: RNCC: 5 | RNVC: 9

5 Dec 2003

3040-01-515-7275
Tube Seal Kit

015157275
C114469: RNCC: 3 | RNVC: 2
R433002577: RNCC: 5 | RNVC: 2
C193915 REF.11,14,15,16,17: RNCC: 5 | RNVC: 2
R433002577: RNCC: 5 | RNVC: 9

5 Dec 2003

3040-01-516-0927
Friction Lining

015160927
80250: RNCC: 3 | RNVC: 2
243-5750625 FIND NO.3 PN 80250: RNCC: 5 | RNVC: 2
5750625: RNCC: D | RNVC: 9

18 Dec 2003

3040-01-516-4013
Disk Brake Shoe Set

015164013
7080207-Z: RNCC: 3 | RNVC: 2
7080207-Z: RNCC: 5 | RNVC: 2
A34015: RNCC: D | RNVC: 9

7 Jan 2004

3040-01-516-2108
Shouldered Shaft

015162108
5793199 FIND 303: RNCC: 3 | RNVC: 2
6395132-1: RNCC: 5 | RNVC: 2

23 Dec 2003

3040-01-516-4884
Straight Shaft

015164884
42137: RNCC: 3 | RNVC: 2
75M23-42135-TD ITEM 1.2: RNCC: 5 | RNVC: 2
75M23-42135 ITEM 1.2: RNCC: 5 | RNVC: 2
75M23-42135 ITEM 2: RNCC: 5 | RNVC: 2

8 Jan 2004

3040-01-516-2824
Shouldered Shaft

015162824
3031136-001: RNCC: 3 | RNVC: 2

29 Dec 2003

3040-01-517-1089
Shouldered Shaft

015171089
1KK220: RNCC: 3 | RNVC: 2
1KK220: RNCC: 3 | RNVC: 9
6509610: RNCC: 5 | RNVC: 9

29 Jan 2004

3040-01-516-6815
Rigid Connecting Link

015166815
901-001-930-101: RNCC: 3 | RNVC: 2

15 Jan 2004

3040-01-521-7707
Shaft Idler

015217707
12484417: RNCC: 3 | RNVC: 2

2 Jul 2004

3040-01-522-1369
Nonaircraft Mechanical Actuator

015221369
15881604-1: RNCC: 3 | RNVC: 2
15881604-1: RNCC: 3 | RNVC: 9
15881602 ITEM 2: RNCC: 5 | RNVC: 9
15881602 ITEM 2: RNCC: C | RNVC: 1

20 Jul 2004

3040-01-517-3781
Linear Actuating Cylinder Assembly Parts Kit

015173781
233-9205: RNCC: 3 | RNVC: 2
185-7688: RNCC: 5 | RNVC: 9

6 Feb 2004

3040-01-522-1878
Shouldered Shaft

015221878
EBV-S2-30-0002-17: RNCC: 3 | RNVC: 2
EBV-S2-30-0002 DET 17: RNCC: 5 | RNVC: 2
EBV-S2-30-0002: RNCC: D | RNVC: 9

21 Jul 2004

3040-01-522-2130
Bevel Gear And Shaft Assembly

015222130
056 730: RNCC: 3 | RNVC: 2

22 Jul 2004

3040-01-522-5871
Linear Actuating Cylinder

015225871
106-0251: RNCC: 3 | RNVC: 2
506-3005 PC. NO. 7: RNCC: 5 | RNVC: 2
506-3005: RNCC: D | RNVC: 9

4 Aug 2004

3040-01-522-5637
Control Cam Assembly

015225637
0621-2004: RNCC: 3 | RNVC: 2
2471-0003 FIND NO 8: RNCC: 5 | RNVC: 2

4 Aug 2004

3040-01-523-2530
Mechanical Drive Housing

015232530
3000274: RNCC: 3 | RNVC: 2
12641136: RNCC: 3 | RNVC: 2
3000274: RNCC: 5 | RNVC: 9

25 Aug 2004

3040-01-524-2646
Shouldered Shaft

015242646
R902409162: RNCC: 3 | RNVC: 2

27 Sep 2004

3040-01-524-2488
Rigid Connecting Link

015242488
12423358-002: RNCC: 3 | RNVC: 2
12423358-002: RNCC: 5 | RNVC: 2

27 Sep 2004

3040-01-524-9803
Inertia Damper

015249803
JE140319X19S6L: RNCC: 3 | RNVC: 2
JE-1403 ASSEMBLY 4: RNCC: 5 | RNVC: 2

25 Oct 2004

3040-01-525-0489
Rigid Connecting Link

015250489
3900-230: RNCC: 3 | RNVC: 2
3900-230: RNCC: 5 | RNVC: 9

26 Oct 2004

3040-01-524-8289
Piston Rod Ring

015248289
A098976.25: RNCC: 3 | RNVC: 2
055940 ITEM 6: RNCC: 5 | RNVC: 2
055940 ITEM 6: RNCC: 5 | RNVC: 9
A098976.25: RNCC: 5 | RNVC: 9

19 Oct 2004

3040-01-525-6348
Linear Actuating Cylinder Assembly

015256348
211.24.623.10: RNCC: 3 | RNVC: 2
211.24.623.02: RNCC: 3 | RNVC: 9

18 Nov 2004

3040-01-526-2221
Flexible Shaft Assembly

015262221
57353-70FT0IN: RNCC: 3 | RNVC: 2

11 Dec 2004

3040-01-458-1509
Rigid Connecting Link

014581509
845-7069126-X-38: RNCC: 3 | RNVC: 1

14 Aug 1998

3040-01-458-7193
Brake Disc

014587193
0801-1206: RNCC: 3 | RNVC: 2
1378AS162-1: RNCC: 5 | RNVC: 9
1378AS162: RNCC: D | RNVC: 9

5 Sep 1998

3040-01-457-3081
Remote Control Lever

014573081
4W-3930: RNCC: 3 | RNVC: 2
4W-3930: RNCC: 5 | RNVC: 2
4W-3930: RNCC: 5 | RNVC: 2
4P-7028 IT 1: RNCC: 5 | RNVC: 2

18 Jul 1998

3040-01-458-8487
Shouldered Shaft

014588487
932-160-00: RNCC: 3 | RNVC: 2

11 Sep 1998

3040-01-458-9477
Linear Actuating Cylinder Assembly

014589477
6-372-004429: RNCC: 3 | RNVC: 2
6-372-004429: RNCC: 5 | RNVC: 9
6371004429: RNCC: 5 | RNVC: 9

16 Sep 1998

3040-01-459-0255
Stop Collar

014590255
90005215E01: RNCC: 3 | RNVC: 2
9005-OC-15: RNCC: 3 | RNVC: 9
9005-OC: RNCC: D | RNVC: 9

17 Sep 1998

3040-01-459-7513
Control Cam

014597513
DF2301-905-FN-13: RNCC: 3 | RNVC: 2
801-6406479-13: RNCC: 5 | RNVC: 2
211039327: RNCC: 5 | RNVC: 9
38011-403: RNCC: D | RNVC: 9
6406479: RNCC: D | RNVC: 9

14 Oct 1998

3040-01-460-0083
Straight Shaft

014600083
12001450: RNCC: 3 | RNVC: 2
215410: RNCC: 5 | RNVC: 9
215410: RNCC: C | RNVC: 1

22 Oct 1998

3040-01-461-5584
Extension Shaft

014615584
74D115050-2121: RNCC: 3 | RNVC: 2

17 Dec 1998

3040-01-468-9163
Flexible Shaft Assembly

014689163
22001-100 X 14FT 3IN: RNCC: 3 | RNVC: 2
22001: RNCC: D | RNVC: 9

27 Oct 1999

3040-01-468-9464
Rigid Connecting Link

014689464
4726-101: RNCC: 3 | RNVC: 2
74B463604-101: RNCC: 7 | RNVC: 2

28 Oct 1999

3040-01-468-7730
Nonaircraft Mechanical Actuator

014687730
5821000: RNCC: 3 | RNVC: 2
5821000: RNCC: 5 | RNVC: 9

21 Oct 1999

3040-01-469-7962
Shaft Collar

014697962
124-4322649 PC27: RNCC: 3 | RNVC: 2
124-4322648 PC28: RNCC: 5 | RNVC: 2
124-4322648 PC28: RNCC: 5 | RNVC: 9
124-4322649 PC27: RNCC: 5 | RNVC: 9
4322648: RNCC: 5 | RNVC: 9
4322649: RNCC: 5 | RNVC: 9
4322649: RNCC: D | RNVC: 9
4322648: RNCC: D | RNVC: 9

24 Nov 1999

3040-01-470-4782
Straight Shaft

014704782
23KP130: RNCC: 1 | RNVC: 2
138-7198: RNCC: 3 | RNVC: 2
138-7198: RNCC: 5 | RNVC: 2
CV133709: RNCC: 5 | RNVC: 2

21 Dec 1999

3040-01-471-9329
Counterbalance Weight

014719329
901-015-062-103: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-462-9692
Straight Shaft

014629692
707667A00: RNCC: 3 | RNVC: 2
8-28-8: RNCC: 5 | RNVC: 2
707667-A: RNCC: 5 | RNVC: 9

26 Feb 1999

3040-01-466-0454
Nonaircraft Mechanical Actuator

014660454
367538-2: RNCC: 3 | RNVC: 2
367538: RNCC: D | RNVC: 9

1 Jul 1999

3040-01-466-7923
Flexible Shaft Assembly

014667923
GTC-701-25: RNCC: 3 | RNVC: 2

2 Aug 1999

3040-01-466-7927
Flexible Shaft Assembly

014667927
GTC-720-15: RNCC: 3 | RNVC: 2

2 Aug 1999

3040-01-467-0728
Rigid Connecting Link

014670728
3392AS354: RNCC: 3 | RNVC: 2

12 Aug 1999

3040-01-467-8959
Linear Actuating Cylinder Assembly

014678959
AG201176D0: RNCC: 3 | RNVC: 2

20 Sep 1999

3040-01-472-7747
Rigid Connecting Link

014727747
12379848: RNCC: 3 | RNVC: 2

16 Mar 2000

3040-01-473-3977
Rigid Connecting Link

014733977
12389681: RNCC: 3 | RNVC: 2

6 Apr 2000

3040-01-473-6702
Rigid Connecting Link

014736702
74A675230-1003: RNCC: 3 | RNVC: 2
74A675230-1003: RNCC: 5 | RNVC: 9
74A675230-1001: RNCC: E | RNVC: 8
74A675230-1001: RNCC: E | RNVC: 8

13 Apr 2000

3040-01-473-9110
Linear Actuating Cylinder Assembly

014739110
AG201175D0: RNCC: 3 | RNVC: 2

19 Apr 2000

3040-01-475-6647
Rigid Connecting Link

014756647
124-5563773 PC 8: RNCC: 3 | RNVC: 2
124-5563772 PC 39: RNCC: 5 | RNVC: 9
5563772: RNCC: D | RNVC: 9
5563773: RNCC: D | RNVC: 9

8 Jun 2000

3040-01-476-7650
Mechanically Actuated Spindle

014767650
8100-1251-0310 PC 315: RNCC: 3 | RNVC: 2
8100-1251-0310: RNCC: D | RNVC: 9

21 Jul 2000

3040-01-477-3266
Shouldered Shaft

014773266
9904108411: RNCC: 3 | RNVC: 2

7 Aug 2000

3040-01-477-3202
Multiple Gears Gearshaft

014773202
9904106172: RNCC: 3 | RNVC: 2

7 Aug 2000

3040-01-476-1124
Straight Axle

014761124
060-31-SP211: RNCC: 3 | RNVC: 2
060DH2-211 ITEM 3: RNCC: 5 | RNVC: 2
060-31-SP211: RNCC: 5 | RNVC: 9
060DH2-211 ITEM 3: RNCC: 5 | RNVC: 9
060DH2-211: RNCC: D | RNVC: 9

27 Jun 2000

3040-01-478-1984
Mechanical Drive Housing

014781984
767008: RNCC: 3 | RNVC: 2

31 Aug 2000

3040-01-478-0385
Ball Joint

014780385
12525439: RNCC: 3 | RNVC: 2
216596: RNCC: 5 | RNVC: 2

29 Aug 2000

3040-01-478-5950
Straight Shaft Assembly

014785950
12466447: RNCC: 3 | RNVC: 2

20 Sep 2000

3040-01-478-6980
Shouldered Shaft

014786980
CC-6003-EPC: RNCC: 3 | RNVC: 2
CC-6000 ITEM 6: RNCC: 5 | RNVC: 2
06071-S1: RNCC: D | RNVC: 9

22 Sep 2000

3040-01-478-8767
Shouldered Shaft

014788767
37306: RNCC: 3 | RNVC: 2

29 Sep 2000

3040-01-479-5954
Shaft Idler

014795954
9-P-91: RNCC: 3 | RNVC: 9
8KP314: RNCC: 5 | RNVC: 2
8KP314: RNCC: 5 | RNVC: 9

26 Oct 2000

3040-01-480-1245
Aircra Output Shaft

014801245
2746333-1: RNCC: 3 | RNVC: 2

8 Nov 2000

3040-01-479-8487
Rigid Connecting Link

014798487
93981-5: RNCC: 3 | RNVC: 2

31 Oct 2000

3040-01-479-9196
Shouldered Shaft

014799196
9HB5: RNCC: 3 | RNVC: 2
9HB5: RNCC: 3 | RNVC: 9
104833PS: RNCC: 5 | RNVC: 2
104833: RNCC: 5 | RNVC: 9

1 Nov 2000

3040-01-480-7071
Planet Gear Shaft

014807071
3000219: RNCC: 3 | RNVC: 2
3000219: RNCC: 5 | RNVC: 9

2 Dec 2000

3040-01-481-6347
Conv Shoulder Shaft

014816347
10052613: RNCC: 3 | RNVC: 2

18 Jan 2001

3040-01-482-3101
Straight Shaft

014823101
254-7015355PN18: RNCC: 3 | RNVC: 2
7015355: RNCC: D | RNVC: 9

15 Feb 2001

3040-01-480-7475
Rigid Connecting Link

014807475
12474755-1: RNCC: 3 | RNVC: 2
12474755: RNCC: D | RNVC: 9

5 Dec 2000

3040-01-482-8750
Shouldered Shaft

014828750
312154: RNCC: 3 | RNVC: 2

7 Mar 2001

3040-01-482-9016
Shouldered Shaft

014829016
V2C13752-1: RNCC: 3 | RNVC: 2
V1E10601: RNCC: D | RNVC: 9

8 Mar 2001

3040-01-483-8110
Spline Adapter

014838110
21216-03: RNCC: 3 | RNVC: 2
G2121603: RNCC: 5 | RNVC: 2

9 Apr 2001

3040-01-483-0347
Rigid Connecting Link

014830347
6397269 PC 26: RNCC: 3 | RNVC: 2
8100-1251-0307 PC NO 66: RNCC: 5 | RNVC: 2
8100-1251-0307: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9

14 Mar 2001

3040-01-484-4689
Shouldered Shaft

014844689
EP-0002977: RNCC: 3 | RNVC: 2
923828.0942: RNCC: 5 | RNVC: 2
9238280942: RNCC: 5 | RNVC: 9

30 Apr 2001

3040-01-484-4847
Linear Actuating Cylinder Assembly

014844847
923828.0743: RNCC: 3 | RNVC: 2
923976.2711: RNCC: 5 | RNVC: 2
9239762711: RNCC: 5 | RNVC: 9

30 Apr 2001

3040-01-491-5727
Flexible Shaft Assembly

014915727
22001-100 X 342IN: RNCC: 3 | RNVC: 2
22001-100 X 28FT 6IN: RNCC: 5 | RNVC: 2
B-409-22001-100: RNCC: 5 | RNVC: 9
22001: RNCC: D | RNVC: 9

25 Oct 2001

3040-01-485-3120
Remote Control Lever

014853120
10587EY: RNCC: 3 | RNVC: 2
4HB547: RNCC: 5 | RNVC: 2
4HB547: RNCC: 5 | RNVC: 9
10587-6: RNCC: D | RNVC: 9

22 May 2001

3040-01-493-2275
Control Cam

014932275
JE943-60/1623943 PIECE 60: RNCC: 3 | RNVC: 2
8100-1253-0071 PC NO 28: RNCC: 3 | RNVC: 2
JE943-60: RNCC: 5 | RNVC: 2
1623943 PIECE 60, DETAIL 14-D: RNCC: 5 | RNVC: 9
8100-1253-0074: RNCC: C | RNVC: 1
8100-1253-0071: RNCC: D | RNVC: 9

20 Dec 2001

3040-01-485-8290
Linear Actuating Cylinder Piston Rod

014858290
5489225-4: RNCC: 3 | RNVC: 2
5489224 ITEM NO. 6: RNCC: 5 | RNVC: 2
5489224: RNCC: D | RNVC: 9
5489225: RNCC: D | RNVC: 9

7 Jun 2001

3040-01-495-0644
Shaft Retaining Plate

014950644
9330760: RNCC: 3 | RNVC: 2
9330760: RNCC: 5 | RNVC: 2
9330770 FIND NO 10: RNCC: 5 | RNVC: 2
9330760: RNCC: 5 | RNVC: 9
9330760: RNCC: 5 | RNVC: 9
9330770: RNCC: D | RNVC: 9

5 Mar 2002

3040-01-486-0581
Linear Actuating Cylinder Cap

014860581
6931003 ITEM 2: RNCC: 3 | RNVC: 2
6931003-2: RNCC: C | RNVC: 1
6931003: RNCC: D | RNVC: 9

18 Jun 2001

3040-01-486-4211
Shaftzshoulderedzzz

014864211
D35-007-1218: RNCC: 3 | RNVC: 2
D35C2500003 ITEM 6: RNCC: 5 | RNVC: 2

28 Jun 2001

3040-01-486-5208
Shouldered Shaft

014865208
593-7067139-6: RNCC: 3 | RNVC: 2
H557-3302-6: RNCC: 5 | RNVC: 2
H577-3302: RNCC: D | RNVC: 9
7067139: RNCC: D | RNVC: 9

2 Jul 2001

3040-01-487-2297
Remote Control Lever

014872297
124-7386972 PC 68: RNCC: 3 | RNVC: 2
124-7386936 PC 22: RNCC: 5 | RNVC: 2
7386936: RNCC: D | RNVC: 9
7386972: RNCC: D | RNVC: 9

30 Jul 2001

3040-01-489-1073
Shaft Collar

014891073
124-4322604 PC 11: RNCC: 3 | RNVC: 2
124-4322603 PC 48: RNCC: 5 | RNVC: 2

12 Sep 2001

3040-01-497-0994
Counterbalance Weight

014970994
5128T01P02: RNCC: 3 | RNVC: 2
5128T0P02: RNCC: 5 | RNVC: 9

9 May 2002

3040-01-494-4659
Manual Control Lever

014944659
6593000093: RNCC: 3 | RNVC: 2

13 Feb 2002

3040-01-499-7666
Trunnion Shaft

014997666
5-601-128: RNCC: 3 | RNVC: 2
5-601-128: RNCC: 5 | RNVC: 2
10367312: RNCC: 6 | RNVC: 9

2 Aug 2002

3040-01-500-8401
Control Cam

015008401
803-1624120 PC 53: RNCC: 3 | RNVC: 2
803-1624129 PC 45: RNCC: 5 | RNVC: 2
1624120: RNCC: D | RNVC: 9
1624129: RNCC: D | RNVC: 9

12 Sep 2002

3040-01-501-0358
Rigid Connecting Link

015010358
566-7067173-57: RNCC: 3 | RNVC: 2
H625-0312-57: RNCC: 5 | RNVC: 2
566-7067173: RNCC: D | RNVC: 9

20 Sep 2002

3040-01-503-3304
Shouldered Shaft

015033304
1320755: RNCC: 3 | RNVC: 2
1320755: RNCC: 5 | RNVC: 9

12 Dec 2002

3040-01-503-6305
Linear Actuating Cylinder Assembly

015036305
N5F-2X24-B-1.38-6-S-V-V-X: RNCC: 3 | RNVC: 2
N5F-2X24-B-1.38-6-S-V-V-X: RNCC: 5 | RNVC: 2
1E9109-0733-01: RNCC: 5 | RNVC: 2
1E9109-0733-01: RNCC: 5 | RNVC: 2
N5F: RNCC: D | RNVC: 9

30 Dec 2002

3040-01-503-7426
Shouldered Shaft

015037426
596-7410507-5: RNCC: 3 | RNVC: 2
596-7410332-4: RNCC: 5 | RNVC: 2
B434-5410-4: RNCC: 5 | RNVC: 2
B434-5412-5: RNCC: 5 | RNVC: 2
7410332: RNCC: D | RNVC: 9
7410507: RNCC: D | RNVC: 9

7 Jan 2003

3040-01-504-2909
Shouldered Shaft

015042909
7138760: RNCC: 3 | RNVC: 2
7138760: RNCC: 5 | RNVC: 9

24 Jan 2003

3040-01-506-0500
Shaft Collar

015060500
743235: RNCC: 3 | RNVC: 2

21 Mar 2003

3040-01-506-3705
Linear Actuating Cylinder Assembly

015063705
GG519546MA: RNCC: 3 | RNVC: 2
5.00CBB2HLTVS14AC43.875: RNCC: 5 | RNVC: 2

28 Mar 2003

3040-01-509-4487
Rigid Connecting Link

015094487
75234: RNCC: 3 | RNVC: 2
75324-1: RNCC: 5 | RNVC: 2

23 Jun 2003

3040-01-512-0682
Tpi Lever

015120682
883081: RNCC: 3 | RNVC: 2

21 Aug 2003

3040-01-512-7935
Control Cam

015127935
JE4174-55: RNCC: 3 | RNVC: 2
803-5184174-55: RNCC: 5 | RNVC: 2
803-5184174: RNCC: D | RNVC: 9

10 Sep 2003

3040-01-512-8595
Flexible Casing Coupling Nut

015128595
20726GB020: RNCC: 3 | RNVC: 2
144396: RNCC: 5 | RNVC: 2
20726GB017 FIND NO 2: RNCC: 5 | RNVC: 2

11 Sep 2003

3040-01-513-0807
Breather

015130807
PM-10667-A: RNCC: 3 | RNVC: 2

17 Sep 2003

3040-01-513-5851
Straight Shaft

015135851
4W4482: RNCC: 3 | RNVC: 2
4W4482 ITEM 1: RNCC: 5 | RNVC: 2
4W4461: RNCC: 5 | RNVC: 9

30 Sep 2003

3040-01-513-6338
Shouldered Shaft

015136338
3324979: RNCC: 3 | RNVC: 2
3324979: RNCC: 3 | RNVC: 9
920800-0422: RNCC: 5 | RNVC: 2

1 Oct 2003

3040-01-515-7230
Cushion Insert

015157230
R433015115: RNCC: 3 | RNVC: 2
P105056-1: RNCC: 5 | RNVC: 9
C193915 REF.24: RNCC: 5 | RNVC: 9

5 Dec 2003

3040-01-515-7537
Rigid Connecting Link

015157537
3042T01P02: RNCC: 3 | RNVC: 2

8 Dec 2003

3040-01-515-7564
Rigid Connecting Link

015157564
3042T01P01: RNCC: 3 | RNVC: 2
3042T01P01: RNCC: 5 | RNVC: 9

8 Dec 2003

3040-01-516-0938
Rigid Connecting Link

015160938
H577-3401-35: RNCC: 3 | RNVC: 2
593-7067141-35: RNCC: 5 | RNVC: 2
7067141: RNCC: D | RNVC: 9

18 Dec 2003

3040-01-516-9213
Tarp Spool Shaft

015169213
1KK196: RNCC: 3 | RNVC: 2
1KK196: RNCC: 3 | RNVC: 9
6509210: RNCC: 5 | RNVC: 9

24 Jan 2004

3040-01-517-7001
Pawl

015177001
465-5381: RNCC: 3 | RNVC: 9
465-5381: RNCC: 5 | RNVC: 2
2 0078-777: RNCC: 5 | RNVC: 2
465-5381: RNCC: 5 | RNVC: 2
10055734: RNCC: 6 | RNVC: 9
3040PL1495417: RNCC: 6 | RNVC: 9
465-5381: RNCC: C | RNVC: 1

18 Feb 2004

3040-01-518-4271
Shaft Collar

015184271
2187389: RNCC: 3 | RNVC: 2

11 Mar 2004

3040-01-518-6539
Shaft-Bearing

015186539
EJ21237: RNCC: 3 | RNVC: 2
EJ-5022 ITEM 9: RNCC: C | RNVC: 1

18 Mar 2004

3040-01-519-3822
Flexible Shaft Assembly

015193822
7578689-001: RNCC: 3 | RNVC: 2
7578689-001: RNCC: 5 | RNVC: 2
7578689-001: RNCC: 5 | RNVC: 2

15 Apr 2004

3040-01-519-8307
Anti-Rotation Tube

015198307
820629-1: RNCC: 3 | RNVC: 2
820629: RNCC: D | RNVC: 9

4 May 2004

3040-01-520-3628
Spur Gearshaft

015203628
167-6404600 FIND 69: RNCC: 3 | RNVC: 2
211076682: RNCC: 5 | RNVC: 2

10 May 2004

3040-01-522-1342
Nonaircraft Mechanical Actuator

015221342
15881603-1: RNCC: 3 | RNVC: 2
15881603-1: RNCC: 3 | RNVC: 9
1588 ITEM 10: RNCC: 5 | RNVC: 9
1588 ITEM 10: RNCC: C | RNVC: 1

20 Jul 2004

3040-01-521-9011
Mechanical Drive Housing

015219011
16-1970-1: RNCC: 3 | RNVC: 2
16-1970: RNCC: 5 | RNVC: 9

9 Jul 2004

3040-01-522-2128
Bevel Gear And Shaft Assembly

015222128
064 098: RNCC: 3 | RNVC: 2
300-064098: RNCC: 5 | RNVC: 2

22 Jul 2004

3040-01-523-3990
Detent Plate

015233990
865711A02: RNCC: 3 | RNVC: 2
14497A2: RNCC: 5 | RNVC: 9

1 Sep 2004

Load More Results