What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 114 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 114 of 300

3040-01-499-1762
Shaft Collar

014991762
064-48855-000: RNCC: 3 | RNVC: 2
064-48855A000: RNCC: 5 | RNVC: 2
364-48833-000 ITEM 168: RNCC: 5 | RNVC: 2
064-18133D: RNCC: C | RNVC: 1
364-48833-000: RNCC: D | RNVC: 9

16 Jul 2002

3040-01-498-4693
Control Cam

014984693
518-4457094-30: RNCC: 3 | RNVC: 2
2010-143-30: RNCC: 5 | RNVC: 2
H600-2010-143-30: RNCC: 5 | RNVC: 2
518-4457094: RNCC: D | RNVC: 9

27 Jun 2002

3040-01-499-5085
Rigid Connecting Link

014995085
4500-261: RNCC: 3 | RNVC: 2
4500: RNCC: D | RNVC: 9

25 Jul 2002

3040-01-500-7941
Straight Shaft

015007941
167-7106787-4: RNCC: 3 | RNVC: 2
H547-0249-4: RNCC: 5 | RNVC: 2
167-7106787: RNCC: D | RNVC: 9

11 Sep 2002

3040-01-500-9038
Cylinder Disc Stack Assembly

015009038
V3D10445-01: RNCC: 3 | RNVC: 2
V1E10521 ITEM 9: RNCC: 5 | RNVC: 2
V1E10521: RNCC: D | RNVC: 9

16 Sep 2002

3040-01-501-0367
Rigid Connecting Link

015010367
566-7067173-74: RNCC: 3 | RNVC: 2
H625-0312-74: RNCC: 5 | RNVC: 2
566-7067173: RNCC: D | RNVC: 9

20 Sep 2002

3040-01-501-1623
Aircraft Loop Clamp

015011623
901-011-429-101: RNCC: 3 | RNVC: 2

26 Sep 2002

3040-01-501-3386
Manual Control Lever

015013386
3227383-1: RNCC: 3 | RNVC: 2
3227383: RNCC: D | RNVC: 9

1 Oct 2002

3040-01-501-6974
Shouldered Shaft

015016974
805-1624120 PC 37: RNCC: 3 | RNVC: 2
805-1624129 PC 19: RNCC: 5 | RNVC: 2
1624120: RNCC: D | RNVC: 9
1624129: RNCC: D | RNVC: 9

10 Oct 2002

3040-01-501-8397
Linear Actuating Cylinder Assembly

015018397
8M0132610: RNCC: 3 | RNVC: 2
98704A26: RNCC: 5 | RNVC: 9

17 Oct 2002

3040-01-502-4937
Rigid Connecting Link

015024937
4C51793-103A: RNCC: 3 | RNVC: 2
4C51793-103A: RNCC: 5 | RNVC: 9
4C51793-103A: RNCC: 5 | RNVC: 9
4C51793: RNCC: D | RNVC: 9

7 Nov 2002

3040-01-502-4384
Anti-Rotation Arm

015024384
V2C13625-1: RNCC: 3 | RNVC: 2
V1E10517 ITEM 5: RNCC: 5 | RNVC: 2
V1E10517: RNCC: D | RNVC: 9

6 Nov 2002

3040-01-502-8468
Shouldered Shaft

015028468
030-31-SP211: RNCC: 3 | RNVC: 2
030DH2-211 ITEM 3: RNCC: 5 | RNVC: 2
030DH2-211: RNCC: D | RNVC: 9

21 Nov 2002

3040-01-503-2523
Linear Actuating Cylinder Piston

015032523
41893: RNCC: 3 | RNVC: 2
15M23-41875 ITEM 8: RNCC: 5 | RNVC: 2
15M23-41875: RNCC: D | RNVC: 9

10 Dec 2002

3040-01-503-6581
Rigid Connecting Link

015036581
6623570: RNCC: 3 | RNVC: 2
6623570: RNCC: 5 | RNVC: 9

2 Jan 2003

3040-01-504-3484
Rigid Connecting Link

015043484
7138784: RNCC: 3 | RNVC: 2
7138784: RNCC: 5 | RNVC: 9

27 Jan 2003

3040-01-505-1074
Rota Reservoir Assy

015051074
65122-11360-042: RNCC: 3 | RNVC: 2

24 Feb 2003

3040-01-505-4034
Rigid Connecting Link

015054034
901-060-075-101: RNCC: 3 | RNVC: 2

6 Mar 2003

3040-01-505-9346
Rigid Connecting Link

015059346
12422796: RNCC: 3 | RNVC: 2
12422796: RNCC: 5 | RNVC: 2
12422796: RNCC: 5 | RNVC: 2

19 Mar 2003

3040-01-505-9471
Shouldered Shaft

015059471
713908-101: RNCC: 3 | RNVC: 2

19 Mar 2003

3040-01-505-9348
Rigid Connecting Link

015059348
12422795: RNCC: 3 | RNVC: 2
12422795: RNCC: 5 | RNVC: 2
12422795: RNCC: 5 | RNVC: 2

19 Mar 2003

3040-01-506-4361
Rigid Connecting Link

015064361
4F23546-103A: RNCC: 3 | RNVC: 2
4F23546: RNCC: D | RNVC: 9

31 Mar 2003

3040-01-507-3975
Linear Actuating Cylinder Assembly

015073975
128760A1: RNCC: 3 | RNVC: 2

28 Apr 2003

3040-01-509-2359
Linear Actuating Cylinder Assembly

015092359
HC5358-3: RNCC: 3 | RNVC: 2
HC-5358: RNCC: 5 | RNVC: 2
HC5358: RNCC: 5 | RNVC: 2

17 Jun 2003

3040-01-509-3616
Rigid Connecting Link

015093616
803-6397269 PC 65: RNCC: 3 | RNVC: 2
8100-1251-0307 PC NO 91: RNCC: 5 | RNVC: 2
167-6926163 PC 60: RNCC: 5 | RNVC: 2
8100-1251-0307: RNCC: D | RNVC: 9
6926163: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9

19 Jun 2003

3040-01-509-2914
Rigid Connecting Link

015092914
7249473: RNCC: 3 | RNVC: 2
7249473: RNCC: 5 | RNVC: 9

18 Jun 2003

3040-01-509-8559
Cam Weldment

015098559
7004083: RNCC: 3 | RNVC: 2

7 Jul 2003

3040-01-510-4291
Body Hub

015104291
0704657: RNCC: 3 | RNVC: 2

21 Jul 2003

3040-01-511-3499
Remote Control Lever

015113499
342-7067321-30: RNCC: 3 | RNVC: 2
H643-7002-30: RNCC: 5 | RNVC: 2
7067321: RNCC: D | RNVC: 9

7 Aug 2003

3040-01-512-3736
Friction Disc Kit

015123736
90-016-3051: RNCC: 3 | RNVC: 2

28 Aug 2003

3040-01-512-0618
Rigid Connecting Link

015120618
884834: RNCC: 3 | RNVC: 2

21 Aug 2003

3040-01-512-6779
Straight Shaft

015126779
A107513-101-11 ITEM 14: RNCC: 3 | RNVC: 2
A107773-101-11: RNCC: 3 | RNVC: 9
A107773-101-11: RNCC: 5 | RNVC: 2
A107513-101-11 ITEM 14: RNCC: 5 | RNVC: 9

8 Sep 2003

3040-01-513-3152
Straight Shaft

015133152
3336849: RNCC: 3 | RNVC: 2
3336849: RNCC: 3 | RNVC: 9

23 Sep 2003

3040-01-513-5879
Straight Shaft

015135879
2HA503: RNCC: 3 | RNVC: 2
2HA503: RNCC: 3 | RNVC: 9
14646: RNCC: 5 | RNVC: 2

30 Sep 2003

3040-01-513-6581
Counterbalance Weight

015136581
2HA948: RNCC: 3 | RNVC: 2
2HA948: RNCC: 3 | RNVC: 9

1 Oct 2003

3040-01-513-8795
Ball Joint Coupling

015138795
8036844: RNCC: 3 | RNVC: 2
0501 213 640: RNCC: 5 | RNVC: 9
8036844: RNCC: 5 | RNVC: 9

8 Oct 2003

3040-01-514-6668
Shouldered Shaft

015146668
P-11854: RNCC: 3 | RNVC: 2

31 Oct 2003

3040-01-514-5120
Push-Pull Control Assembly

015145120
CC63330: RNCC: 3 | RNVC: 9
1165901: RNCC: 5 | RNVC: 2

28 Oct 2003

3040-01-515-1074
Linear Actuating Cylinder Piston

015151074
2HA850: RNCC: 3 | RNVC: 2
2HA850: RNCC: 3 | RNVC: 9
6600750: RNCC: 5 | RNVC: 2

17 Nov 2003

3040-01-515-1774
Plantary Carrier

015151774
2T3653: RNCC: 3 | RNVC: 2
4584: RNCC: 5 | RNVC: 2

18 Nov 2003

3040-01-515-0845
Mechanical Drive Housing Part

015150845
3195201: RNCC: 3 | RNVC: 2
3195201: RNCC: 5 | RNVC: 9

14 Nov 2003

3040-01-515-7197
Linear Actuating Cylinder

015157197
R433008098: RNCC: 3 | RNVC: 2
C193923: RNCC: 3 | RNVC: 9
173944: RNCC: 5 | RNVC: 2
C193923 REV B: RNCC: 5 | RNVC: 9

5 Dec 2003

3040-01-515-8949
Mechanically Actuated Spindle

015158949
8100-1251-0298 PT. NO. 315: RNCC: 3 | RNVC: 2
8100-1251-0298: RNCC: D | RNVC: 9

12 Dec 2003

3040-01-515-6914
Linear Actuating Cylinder

015156914
R433008141: RNCC: 3 | RNVC: 2
173733: RNCC: 5 | RNVC: 2
C194065 REV A C194065-3880: RNCC: 5 | RNVC: 9
C194065-3880: RNCC: 5 | RNVC: 9

4 Dec 2003

3040-01-517-7722
Manual Control Lever

015177722
02324501: RNCC: 3 | RNVC: 2
02182601: RNCC: 5 | RNVC: 9

19 Feb 2004

3040-01-518-2773
Linear Actuating Cylinder Assembly

015182773
1017866: RNCC: 3 | RNVC: 9
DJ125X10: RNCC: 5 | RNVC: 2
DJ125X10: RNCC: 5 | RNVC: 2

6 Mar 2004

3040-01-519-7250
Materi Aircraft Rod

015197250
21C8029P43: RNCC: 3 | RNVC: 2
21C8029P43: RNCC: 5 | RNVC: 2

29 Apr 2004

3040-01-518-4954
Housing Adapter

015184954
29530484: RNCC: 3 | RNVC: 2
16KP794: RNCC: 5 | RNVC: 2
16KP794: RNCC: 5 | RNVC: 9

15 Mar 2004

3040-01-518-6239
Multiple Gears Gearshaft

015186239
529664: RNCC: 3 | RNVC: 2

17 Mar 2004

3040-01-520-6693
Mechanically Actuated Spindle

015206693
3247677: RNCC: 3 | RNVC: 2
3247677: RNCC: 5 | RNVC: 9

20 May 2004

3040-01-521-1631
Control Cam

015211631
853968 3: RNCC: 3 | RNVC: 2

12 Jun 2004

3040-01-521-1621
Linear Actuating Cylinder Piston

015211621
117142100: RNCC: 3 | RNVC: 2

12 Jun 2004

3040-01-521-3107
Shouldered Shaft

015213107
323913: RNCC: 3 | RNVC: 2

17 Jun 2004

3040-01-521-9238
Bevel Gear And Shaft Assembly

015219238
15932009-1: RNCC: 3 | RNVC: 2
15931000 FIND NO. 10: RNCC: 5 | RNVC: 2
15931200 FIND NO. 10: RNCC: 5 | RNVC: 2
15932009 DASH 1: RNCC: 5 | RNVC: 2
15931200 FIND NO. 10: RNCC: 5 | RNVC: 9
15932009 DASH 1: RNCC: 5 | RNVC: 9
15932009-1: RNCC: 5 | RNVC: 9
15931000 FIND NO. 10: RNCC: 5 | RNVC: 9

12 Jul 2004

3040-01-521-9967
Shaft Retaining Plate

015219967
29512127: RNCC: 3 | RNVC: 2

14 Jul 2004

3040-01-522-2156
Manual Control Lever

015222156
99C621-06-DWG-09-A-0: RNCC: 3 | RNVC: 2
HI-721-6000 REV G ITEM 14: RNCC: 5 | RNVC: 1

22 Jul 2004

3040-01-522-3448
Straight Shaft

015223448
K1401: RNCC: 3 | RNVC: 2
PR2011-1PC36: RNCC: 5 | RNVC: 2

28 Jul 2004

3040-01-522-4497
Linear Actuating Cylinder Assembly Parts Kit

015224497
RKCCV40SK51.75: RNCC: 3 | RNVC: 2

30 Jul 2004

3040-01-522-4036
Planetary Gears Carrier

015224036
6608/1-029-000: RNCC: 3 | RNVC: 2
6608/2-029-000: RNCC: 3 | RNVC: 2
6600 REV A FN 9: RNCC: 5 | RNVC: 9
6600 PL REV C FN 9: RNCC: C | RNVC: 1
6600: RNCC: D | RNVC: 9

29 Jul 2004

3040-01-525-3466
Rigid Connecting Link

015253466
74A661329-1003: RNCC: 3 | RNVC: 2

4 Nov 2004

3040-01-477-1460
Linear Actuating Cylinder Assembly

014771460
6372005895: RNCC: 3 | RNVC: 2

1 Aug 2000

3040-01-491-5725
Flexible Shaft Assembly

014915725
22001-100 X 284IN: RNCC: 3 | RNVC: 2
22001-100 X 23FT 8IN: RNCC: 5 | RNVC: 2
B-409-22001-100: RNCC: 5 | RNVC: 9
22001: RNCC: D | RNVC: 9

25 Oct 2001

3040-01-486-0972
Assembly Cam

014860972
247082: RNCC: 3 | RNVC: 9
247082: RNCC: 5 | RNVC: 2
247008-1: RNCC: 5 | RNVC: 9
247207: RNCC: 5 | RNVC: 9

18 Jun 2001

3040-01-486-9368
Shouldered Shaft

014869368
151K0037: RNCC: 3 | RNVC: 9
151K0037: RNCC: 5 | RNVC: 2
151K0037: RNCC: 5 | RNVC: 9

19 Jul 2001

3040-01-488-7634
Bucket Cylinder

014887634
50413558: RNCC: 3 | RNVC: 2
413558: RNCC: 5 | RNVC: 2
413558: RNCC: 5 | RNVC: 2

4 Sep 2001

3040-01-490-1771
Nonrotating Shaft Eye Bracket

014901771
154831: RNCC: 3 | RNVC: 2
154831: RNCC: 5 | RNVC: 2

21 Sep 2001

3040-01-490-2550
Jack Assembly

014902550
6514E31-001: RNCC: 3 | RNVC: 2
6514E31: RNCC: D | RNVC: 9

24 Sep 2001

3040-01-495-4875
Linear Actuating Cylinder Assembly

014954875
9330764: RNCC: 3 | RNVC: 2
9330770-6: RNCC: 5 | RNVC: 2
9330764: RNCC: 5 | RNVC: 2

18 Mar 2002

3040-01-458-3796
Brake Shoe Push Rod

014583796
402389-3: RNCC: 3 | RNVC: 2

24 Aug 1998

3040-01-459-9304
Wear Strip(Bearing)

014599304
21865: RNCC: 3 | RNVC: 2

19 Oct 1998

3040-01-460-4480
Shouldered Shaft

014604480
74D240602-2085: RNCC: 3 | RNVC: 2
74D240602-2085: RNCC: 5 | RNVC: 9

5 Nov 1998

3040-01-461-3228
Cylinder Assem Head

014613228
82184: RNCC: 3 | RNVC: 9
DV1378-045: RNCC: 5 | RNVC: 2

9 Dec 1998

3040-01-461-3330
Straight Shaft

014613330
1378AS120-1: RNCC: 3 | RNVC: 2

9 Dec 1998

3040-01-461-3334
Rotating Shaft Eye Bracket

014613334
3Q762D-1: RNCC: 3 | RNVC: 2

9 Dec 1998

3040-01-461-8721
Linear Actuating Cylinder Assembly

014618721
1H000194651: RNCC: 3 | RNVC: 2
5038016: RNCC: 5 | RNVC: 9
2.00CF/H-2HLTVS13C X 82.000: RNCC: 5 | RNVC: 9
AG189983E0: RNCC: 5 | RNVC: 9

8 Jan 1999

3040-01-462-3026
Linear Actuating Cylinder Assembly

014623026
3143281: RNCC: 3 | RNVC: 2
312.5-DXPN: RNCC: 5 | RNVC: 9
3143281: RNCC: 5 | RNVC: 9

28 Jan 1999

3040-01-468-0856
Linear Actuating Cylinder Assembly

014680856
15662149-1: RNCC: 3 | RNVC: 2
15662149-1: RNCC: 5 | RNVC: 9

28 Sep 1999

3040-01-469-3265
Control Cam

014693265
74A661126-1003: RNCC: 3 | RNVC: 2
74A661126-1003: RNCC: 5 | RNVC: 2

12 Nov 1999

3040-01-469-3405
Hydraulic Accumulator Bladder

014693405
603129: RNCC: 3 | RNVC: 2
862441 ITEM NO 6: RNCC: D | RNVC: 9

12 Nov 1999

3040-01-470-3920
Shaft Collar

014703920
124-4322611 PC 19: RNCC: 3 | RNVC: 2
124-4322615 PC 3: RNCC: 5 | RNVC: 2
5/8-18UNC-2B: RNCC: C | RNVC: 1
4322611: RNCC: D | RNVC: 9
4322615: RNCC: D | RNVC: 9

17 Dec 1999

3040-01-471-8288
Declutch Wedge

014718288
7-317237205-1: RNCC: 3 | RNVC: 2

16 Feb 2000

3040-01-471-9293
Counterbalance Weight

014719293
901-015-024-101: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-463-2068
Control Pedal

014632068
1378AS285-1: RNCC: 3 | RNVC: 2

11 Mar 1999

3040-01-463-4251
Rigid Connecting Link

014634251
803-6397269 PC23 ZINC PLATED: RNCC: 3 | RNVC: 2
167-6926161 PC186 ZINC PLATED: RNCC: 5 | RNVC: 2
8100-1251-0307 PC NO 49: RNCC: C | RNVC: 1
6397269: RNCC: D | RNVC: 9

19 Mar 1999

3040-01-465-1259
Linear Actuating Cylinder Piston

014651259
071700117: RNCC: 3 | RNVC: 2

21 May 1999

3040-01-465-2540
Shouldered Shaft

014652540
28826: RNCC: 3 | RNVC: 2

27 May 1999

3040-01-465-7540
Rigid Connecting Link

014657540
74A675110-1001: RNCC: 3 | RNVC: 2
74A675110-1001: RNCC: 5 | RNVC: 9

21 Jun 1999

3040-01-467-0405
Manual Control Lever

014670405
47A4446G36: RNCC: 3 | RNVC: 2

11 Aug 1999

3040-01-467-6925
Linear Actuating Cylinder Assembly Parts Kit

014676925
171-KB001-0150: RNCC: 3 | RNVC: 9

10 Sep 1999

3040-01-468-0305
Control Cam

014680305
039912001: RNCC: 3 | RNVC: 2
11.1099.004.250: RNCC: 5 | RNVC: 9
03.9912.001: RNCC: 5 | RNVC: 9
11.1099.004-250: RNCC: 5 | RNVC: 9
11.1099 ITEM 250: RNCC: C | RNVC: 1
11.1099.001-250: RNCC: C | RNVC: 1
11.1099.001-250: RNCC: C | RNVC: 1
11.1099: RNCC: D | RNVC: 9

24 Sep 1999

3040-01-473-2741
Pawl

014732741
AIN/0311 962128: RNCC: 3 | RNVC: 2
0311-962128: RNCC: 5 | RNVC: 2

3 Apr 2000

3040-01-473-7964
Manual Control Lever

014737964
12620312: RNCC: 3 | RNVC: 2
AT174467: RNCC: 5 | RNVC: 9

17 Apr 2000

3040-01-473-7966
Manual Control Lever

014737966
12620313: RNCC: 3 | RNVC: 2
AT174468: RNCC: 3 | RNVC: 9

17 Apr 2000

3040-01-473-9809
Linear Actuating Cylinder Cap

014739809
1023338: RNCC: 3 | RNVC: 9
AT217720: RNCC: 5 | RNVC: 9

20 Apr 2000

3040-01-473-9186
Linear Actuating Cylinder Assembly

014739186
B 1/2 X 1 7/8 134J1H: RNCC: 3 | RNVC: 2
B 1/2 X 1 7/8 1-3-4J-1H: RNCC: 3 | RNVC: 2
PL-H20064P001 FIND 5: RNCC: 5 | RNVC: 2
B 1/2 X 1 7/8 1: RNCC: C | RNVC: 1

19 Apr 2000

3040-01-474-1096
Rigid Connecting Link

014741096
HN152-1104 PART NO. 33: RNCC: 3 | RNVC: 2
HN152-1103 PART NO. 60: RNCC: 3 | RNVC: 2
HN152-1103: RNCC: D | RNVC: 9
HN152-1104: RNCC: D | RNVC: 9

25 Apr 2000

3040-01-474-7989
Shouldered Shaft

014747989
814165-3: RNCC: 3 | RNVC: 2
814165: RNCC: D | RNVC: 9

12 May 2000

3040-01-475-0458
Linear Actuating Cylinder Piston Rod

014750458
4255977: RNCC: 3 | RNVC: 9
4255977: RNCC: 5 | RNVC: 2
AT154750: RNCC: 5 | RNVC: 9

19 May 2000

3040-01-475-5483
Shouldered Shaft

014755483
2784596-1: RNCC: 3 | RNVC: 2
2784596: RNCC: D | RNVC: 9

7 Jun 2000

3040-01-477-4024
Rigid Connecting Link

014774024
68A500071-1003: RNCC: 3 | RNVC: 2
68A500071-1003: RNCC: 5 | RNVC: 2
68A500071: RNCC: D | RNVC: 9
68A500060-1001: RNCC: E | RNVC: 8

8 Aug 2000

3040-01-477-7007
Straight Shaft

014777007
12370964: RNCC: 3 | RNVC: 2

16 Aug 2000

3040-01-477-7882
Shaft-Hub Clamp-Bushing Assembly

014777882
9904106176: RNCC: 3 | RNVC: 2

18 Aug 2000

3040-01-478-0462
Straight Shaft

014780462
135230: RNCC: 3 | RNVC: 2

29 Aug 2000

3040-01-478-1141
Ball Joint

014781141
216786: RNCC: 3 | RNVC: 2

30 Aug 2000

3040-01-478-1824
Ai Shouldered Shaft

014781824
4308014-1: RNCC: 3 | RNVC: 2

31 Aug 2000

3040-01-478-1865
Rigid Connecting Link

014781865
74A463602-1003: RNCC: 3 | RNVC: 2

31 Aug 2000

3040-01-478-1989
Mechanical Drive Housing

014781989
767011: RNCC: 3 | RNVC: 2

31 Aug 2000

3040-01-478-6446
Nonrotating Shaft Eye Bracket

014786446
22KP773: RNCC: 1 | RNVC: 2
29503294: RNCC: 3 | RNVC: 2

21 Sep 2000

3040-01-479-1480
Rigid Connecting Link

014791480
12417470-004: RNCC: 3 | RNVC: 2
12417470-004: RNCC: 5 | RNVC: 2
12417470-004: RNCC: 5 | RNVC: 2
12417470: RNCC: D | RNVC: 9

12 Oct 2000

3040-01-478-7150
2-Piece Clamp Collar

014787150
2L206S1: RNCC: 3 | RNVC: 2
3000205: RNCC: 5 | RNVC: 2
3000205: RNCC: 5 | RNVC: 9

25 Sep 2000

3040-01-479-1054
Shoe Type Brake

014791054
023-103-00: RNCC: 3 | RNVC: 2
023-103-00: RNCC: 5 | RNVC: 9

11 Oct 2000

3040-01-479-3485
Driver Spindle

014793485
9HB15: RNCC: 3 | RNVC: 2
9HB15: RNCC: 3 | RNVC: 9
79016-202JQ: RNCC: 5 | RNVC: 2

18 Oct 2000

3040-01-479-5929
Shaft Collar

014795929
43136-089: RNCC: 3 | RNVC: 2
8100-1256-0305 PC 32: RNCC: 5 | RNVC: 2
8100-1256-0305 PC NO 32: RNCC: 5 | RNVC: 2
8100-1256-0305: RNCC: D | RNVC: 9

26 Oct 2000

3040-01-480-1929
Aircra Piston Guide

014801929
3921399-325: RNCC: 3 | RNVC: 2
3921399-325: RNCC: 3 | RNVC: 2

9 Nov 2000

3040-01-480-3981
Linear Actuating Cylinder Piston Rod

014803981
3002356: RNCC: 3 | RNVC: 2
3002356: RNCC: 5 | RNVC: 9

18 Nov 2000

3040-01-480-3984
Rigid Connecting Link

014803984
9HB13: RNCC: 3 | RNVC: 2
9HB13: RNCC: 3 | RNVC: 9
ML-14.44-1: RNCC: 5 | RNVC: 2
GS-4665-14.44: RNCC: 5 | RNVC: 9

18 Nov 2000

3040-01-481-2841
Ai Shouldered Shaft

014812841
MC21786: RNCC: 3 | RNVC: 2
MC21786: RNCC: 3 | RNVC: 2

28 Dec 2000

3040-01-481-6352
Ai Shouldered Shaft

014816352
10052606: RNCC: 3 | RNVC: 2

18 Jan 2001

3040-01-481-6375
Airc Straight Shaft

014816375
10052631: RNCC: 3 | RNVC: 2

18 Jan 2001

3040-01-481-8434
Shouldered Shaft

014818434
12446191: RNCC: 3 | RNVC: 2
12444691: RNCC: D | RNVC: 9

29 Jan 2001

3040-01-481-4551
Shouldered Shaft

014814551
123-1680562 PC 51: RNCC: 3 | RNVC: 2
1680561: RNCC: D | RNVC: 9

9 Jan 2001

3040-01-483-6002
Straight Shaft

014836002
132162: RNCC: 3 | RNVC: 2

3 Apr 2001

3040-01-483-3893
Shaft Retaining Plate

014833893
12593116: RNCC: 3 | RNVC: 2

27 Mar 2001

3040-01-483-5464
Rigid Connecting Link

014835464
805-1626433 PC 12: RNCC: 3 | RNVC: 2
1626433: RNCC: D | RNVC: 9

2 Apr 2001

3040-01-486-5573
Shouldered Shaft

014865573
367160-1: RNCC: 3 | RNVC: 2

3 Jul 2001

3040-01-491-6493
Flexible Shaft Assembly

014916493
22001-100 X 281 IN: RNCC: 3 | RNVC: 2
22001-100 X 23FT 5IN: RNCC: 5 | RNVC: 2
B-409-22001-100: RNCC: 5 | RNVC: 9
22001-100 X 281: RNCC: C | RNVC: 1
22001: RNCC: D | RNVC: 9

26 Oct 2001

3040-01-492-6436
Counterbalance Weight

014926436
5D88089-001: RNCC: 3 | RNVC: 2
6512E29FN47: RNCC: 5 | RNVC: 2
6512E29: RNCC: D | RNVC: 9

7 Dec 2001

3040-01-486-5820
Nonaircraft Mechanical Actuator

014865820
408693-004: RNCC: 3 | RNVC: 2

5 Jul 2001

3040-01-492-4908
Rigid Connecting Link

014924908
12422528: RNCC: 3 | RNVC: 2
12422528: RNCC: 5 | RNVC: 2
12422528: RNCC: D | RNVC: 9

30 Nov 2001

3040-01-493-8228
Shouldered Shaft

014938228
015-131-16: RNCC: 3 | RNVC: 2
015-131-16: RNCC: 5 | RNVC: 2
015SH2-211 ITEM 3: RNCC: 5 | RNVC: 9
015SH2-211: RNCC: D | RNVC: 9

22 Jan 2002

3040-01-490-4190
Pulley Fan Adapter

014904190
3468AS1305-1: RNCC: 3 | RNVC: 2
3468AS1305: RNCC: D | RNVC: 9

27 Sep 2001

3040-01-495-7880
Rigid Connecting Link

014957880
1029-1: RNCC: 3 | RNVC: 2

25 Mar 2002

3040-01-497-2966
Hydraulic Accumulator

014972966
D-2617-1: RNCC: 3 | RNVC: 2

16 May 2002

3040-01-498-7890
Shouldered Shaft

014987890
137772: RNCC: 3 | RNVC: 2

1 Jul 2002

3040-01-498-3976
Shouldered Shaft

014983976
596-7409761-51: RNCC: 3 | RNVC: 2
B831-9110-51: RNCC: 5 | RNVC: 2
7409761: RNCC: D | RNVC: 9

25 Jun 2002

3040-01-500-1189
Shouldered Shaft

015001189
596-7409917-81: RNCC: 3 | RNVC: 2
B8312412A-81: RNCC: 5 | RNVC: 2
B831-2412-81: RNCC: 5 | RNVC: 9
596-7409917: RNCC: D | RNVC: 9

14 Aug 2002

3040-01-500-0649
Push-Pull Control Assembly

015000649
21407243: RNCC: 3 | RNVC: 2
3851064-0: RNCC: 3 | RNVC: 9

13 Aug 2002

3040-01-502-6314
Mechanical Drive Housing

015026314
9363741: RNCC: 3 | RNVC: 2

14 Nov 2002

3040-01-502-7665
Shouldered Shaft

015027665
C61702-001: RNCC: 3 | RNVC: 1
C61702: RNCC: 3 | RNVC: 2
C61702-001: RNCC: 3 | RNVC: 2
2688024: RNCC: 3 | RNVC: 2
2688024: RNCC: 5 | RNVC: 2
10107303: RNCC: 6 | RNVC: 9

20 Nov 2002

3040-01-502-4312
Mechanically Actuated Spindle

015024312
2217-0003: RNCC: 3 | RNVC: 2
2217-0003: RNCC: 5 | RNVC: 2
2127-0003: RNCC: 5 | RNVC: 9

5 Nov 2002

3040-01-503-3470
Shouldered Shaft

015033470
1321161: RNCC: 3 | RNVC: 9
0734-310-267: RNCC: 5 | RNVC: 9
0734.310.416: RNCC: 5 | RNVC: 9
1321161: RNCC: 5 | RNVC: 9

13 Dec 2002

3040-01-503-6471
Rigid Connecting Link

015036471
6623525: RNCC: 3 | RNVC: 2
6623525: RNCC: 5 | RNVC: 9

2 Jan 2003

3040-01-503-8711
Shouldered Shaft Assembly

015038711
596-7409221-A2: RNCC: 3 | RNVC: 2
B4342310-A2: RNCC: 5 | RNVC: 2
7409221: RNCC: D | RNVC: 9

10 Jan 2003

3040-01-504-8492
Shouldered Shaft

015048492
SA-2679: RNCC: 3 | RNVC: 2
3362087: RNCC: 5 | RNVC: 2
3362087: RNCC: 7 | RNVC: 9

12 Feb 2003

3040-01-505-7400
Linear Actuating Cylinder Assembly

015057400
114-8861: RNCC: 3 | RNVC: 2

13 Mar 2003

3040-01-503-9348
Disk Brake Shoe

015039348
0740-1033: RNCC: 3 | RNVC: 2

14 Jan 2003

3040-01-507-9973
Shouldered Shaft

015079973
722613A: RNCC: 3 | RNVC: 2

9 May 2003

3040-01-509-5772
Flexible Drive Shaft

015095772
901-301-501-101: RNCC: 3 | RNVC: 2

26 Jun 2003

3040-01-509-5567
Worm Wheel Gearshaft

015095567
46-1553-1: RNCC: 3 | RNVC: 2

25 Jun 2003

3040-01-512-0632
Rigid Connecting Link

015120632
883142A03: RNCC: 3 | RNVC: 2
883142A 2: RNCC: 5 | RNVC: 9

21 Aug 2003

3040-01-512-4634
Shouldered Shaft

015124634
170-6676: RNCC: 3 | RNVC: 2
7E-4358 ITEM 14: RNCC: 5 | RNVC: 2

2 Sep 2003

3040-01-511-5513
Linear Actuating Cylinder Assembly

015115513
6623367: RNCC: 3 | RNVC: 2
6623850: RNCC: 3 | RNVC: 2
6623367: RNCC: 5 | RNVC: 9
6623850: RNCC: 5 | RNVC: 9

12 Aug 2003

3040-01-511-0264
Body Hub

015110264
6124-999-000: RNCC: 3 | RNVC: 2
6612 FN 3: RNCC: 5 | RNVC: 2
6612 PL FN 3: RNCC: 5 | RNVC: 2
6124: RNCC: 5 | RNVC: 2
6612: RNCC: D | RNVC: 9

31 Jul 2003

3040-01-511-5626
Spur Gearshaft

015115626
42357-55: RNCC: 3 | RNVC: 2

12 Aug 2003

3040-01-512-9649
Rigid Connecting Link

015129649
74A733096-1001: RNCC: 3 | RNVC: 2
3930AS654: RNCC: 3 | RNVC: 2

15 Sep 2003

3040-01-513-1331
Shaft Collar

015131331
2498-2306-47: RNCC: 3 | RNVC: 2
805-1624130 PC 24: RNCC: 5 | RNVC: 2
2498-2306 FIND NO 47: RNCC: 5 | RNVC: 2
2498-2306: RNCC: D | RNVC: 9

18 Sep 2003

3040-01-513-4809
Shaft Collar

015134809
1416600: RNCC: 3 | RNVC: 2
14166: RNCC: 5 | RNVC: 2

26 Sep 2003

3040-01-513-5888
Straight Shaft

015135888
2HA501: RNCC: 3 | RNVC: 2
2HA501: RNCC: 3 | RNVC: 9
14645: RNCC: 5 | RNVC: 2

30 Sep 2003

3040-01-515-0371
Push-Pull Control Assembly

015150371
10-1340-03: RNCC: 3 | RNVC: 2
3523608: RNCC: 3 | RNVC: 9
01-5010-02: RNCC: 5 | RNVC: 9
3523608: RNCC: 5 | RNVC: 9
3485615: RNCC: 5 | RNVC: 9

13 Nov 2003

3040-01-515-3730
Multiple Gears Gearshaft

015153730
9914.0393: RNCC: 3 | RNVC: 2
9914.0393: RNCC: 5 | RNVC: 2
H27: RNCC: 5 | RNVC: 2

21 Nov 2003

3040-01-515-7254
Kit

015157254
R433033116: RNCC: 3 | RNVC: 2
R433033116: RNCC: 3 | RNVC: 9
P116549-1: RNCC: 5 | RNVC: 9
C193923 REF.5B,5C,5D,5E,5F: RNCC: 5 | RNVC: 9

5 Dec 2003

3040-01-517-5582
Rigid Connecting Link

015175582
901-031-332-119: RNCC: 3 | RNVC: 2

12 Feb 2004

3040-01-517-7018
Rotating Shaft Eye Bracket

015177018
7-07-092: RNCC: 3 | RNVC: 2

18 Feb 2004

3040-01-519-1205
Planetary Gears Carrier

015191205
29530482: RNCC: 3 | RNVC: 2
8KP485: RNCC: 5 | RNVC: 2
8KP485: RNCC: 5 | RNVC: 9

7 Apr 2004

3040-01-519-7000
Straight Shaft

015197000
E65012192: RNCC: 3 | RNVC: 2
SA65012192: RNCC: 5 | RNVC: 9

28 Apr 2004

3040-01-520-9857
Manual Control Lever

015209857
2171-2191-030: RNCC: 3 | RNVC: 2
2171-2191-020: RNCC: 5 | RNVC: 9

4 Jun 2004

3040-01-521-1372
Bell Crank

015211372
2600742: RNCC: 3 | RNVC: 2

10 Jun 2004

3040-01-521-0879
Control Cam

015210879
5361SPB: RNCC: 3 | RNVC: 2
CW8793E ITEM NO. 24: RNCC: 5 | RNVC: 2

9 Jun 2004

3040-01-521-3755
Drive Asm-Accessory

015213755
23523998: RNCC: 3 | RNVC: 2

21 Jun 2004

3040-01-521-8327
Linear Actuating Cylinder Head

015218327
1002367-1: RNCC: 3 | RNVC: 2

7 Jul 2004

3040-01-521-9631
Extension Shaft

015219631
12143-205: RNCC: 3 | RNVC: 2

13 Jul 2004

3040-01-521-9931
Shaft Retaining Plate

015219931
29505978: RNCC: 3 | RNVC: 2

14 Jul 2004

3040-01-522-2797
Linear Actuating Cylinder Assembly

015222797
F008230: RNCC: 3 | RNVC: 2
7193208-00: RNCC: 5 | RNVC: 9
7193208-000: RNCC: 7 | RNVC: 2

26 Jul 2004

3040-01-522-5614
Linear Actuating Cylinder Piston

015225614
C-18657 PL HP-7: RNCC: 3 | RNVC: 2

4 Aug 2004

3040-01-523-3999
Shouldered Shaft

015233999
45-812773T: RNCC: 3 | RNVC: 2

1 Sep 2004

3040-01-524-2821
Differential Spider

015242821
0223-01735-210: RNCC: 3 | RNVC: 2
0221-12662-922 REF 7: RNCC: 5 | RNVC: 2

28 Sep 2004

3040-01-525-5175
Control Cable Assembly

015255175
752-7068433-A5: RNCC: 3 | RNVC: 2
752-7068420-25: RNCC: 5 | RNVC: 1
H832-0301-25: RNCC: 5 | RNVC: 1
H832-0399-A5: RNCC: 5 | RNVC: 2

13 Nov 2004

3040-01-525-9726
Rigid Connecting Link

015259726
4KK731: RNCC: 3 | RNVC: 2
4KK731: RNCC: 3 | RNVC: 9
865-1582: RNCC: 5 | RNVC: 2

2 Dec 2004

3040-01-526-0097
Straight Shaft

015260097
4KK597: RNCC: 3 | RNVC: 2
4KK597: RNCC: 3 | RNVC: 9
494-5719: RNCC: 5 | RNVC: 2

3 Dec 2004

3040-01-526-4864
Flexible Shaft Assembly

015264864
65042-93FT0IN: RNCC: 3 | RNVC: 2
P-2381 FN 9 SHEET 1: RNCC: 5 | RNVC: 2

20 Dec 2004

3040-01-526-5015
Flexible Shaft Assembly

015265015
65042-69FT0IN: RNCC: 3 | RNVC: 2
P-2380 SH 1, FN 9: RNCC: 5 | RNVC: 2

20 Dec 2004

3040-01-458-8806
Worm Shaft Housing

014588806
08640269D: RNCC: 3 | RNVC: 9
08640269: RNCC: C | RNVC: 1

14 Sep 1998

3040-01-459-8128
Shaft Idler

014598128
RSJ212EA: RNCC: 3 | RNVC: 2

15 Oct 1998

3040-01-460-3601
Housing Adapter

014603601
22196: RNCC: 3 | RNVC: 2

4 Nov 1998

3040-01-461-9605
Linear Actuating Cylinder Assembly

014619605
AG189983A0: RNCC: 3 | RNVC: 2
1.50F-2HLTVS23 X 1.625: RNCC: 5 | RNVC: 1
5038034: RNCC: 5 | RNVC: 9

13 Jan 1999

3040-01-460-5620
Linear Actuating Cylinder Piston

014605620
82100: RNCC: 3 | RNVC: 9

9 Nov 1998

3040-01-461-8951
Counterbalance Weight

014618951
3056T20P01: RNCC: 3 | RNVC: 2

11 Jan 1999

3040-01-468-1530
Shouldered Shaft

014681530
527014: RNCC: 3 | RNVC: 2
527014000: RNCC: 3 | RNVC: 2

30 Sep 1999

3040-01-468-1495
Shaft Retaining Plate

014681495
818613-2: RNCC: 3 | RNVC: 2

30 Sep 1999

3040-01-468-5405
Manual Control Lever

014685405
715-071-1: RNCC: 3 | RNVC: 2
12976320: RNCC: D | RNVC: 9

14 Oct 1999

3040-01-468-7194
Mechanically Actuated Spindle

014687194
124-4322648 PC 22: RNCC: 3 | RNVC: 2
124-4322649 PC 21: RNCC: 3 | RNVC: 9
124-4322649: RNCC: D | RNVC: 9
124-4322648: RNCC: D | RNVC: 9

20 Oct 1999

3040-01-469-4998
Shaft Collar

014694998
HST1770ZB-6: RNCC: 3 | RNVC: 2
HST1770ZB-6: RNCC: 3 | RNVC: 2
HST1770ZB-6: RNCC: 5 | RNVC: 9

15 Nov 1999

3040-01-469-8454
Rigid Connecting Link

014698454
901-031-635-115: RNCC: 3 | RNVC: 2

25 Nov 1999

3040-01-470-2948
Rotating Shaft Eye Bracket

014702948
124-4322650 PC 29: RNCC: 3 | RNVC: 2
124-4399311 PC 28: RNCC: 3 | RNVC: 9
124-4399311: RNCC: D | RNVC: 9
124-4322650: RNCC: D | RNVC: 9

14 Dec 1999

3040-01-471-9126
Shaft Idler

014719126
901-011-351-101: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-471-9012
Adapter Assy

014719012
901-044-561-103: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-471-9923
Rigid Connecting Link

014719923
901-031-635-109: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-464-4119
Rigid Connecting Link

014644119
803-6397269 PC 18 ZINC PLATED: RNCC: 3 | RNVC: 2
167-6926161 PC 177 ZINC PLATED: RNCC: 5 | RNVC: 2
6397269: RNCC: D | RNVC: 9

28 Apr 1999

3040-01-464-2413
Spur Gearshaft

014642413
625-10009-1: RNCC: 3 | RNVC: 9
625-10009-1: RNCC: C | RNVC: 1

22 Apr 1999

3040-01-465-8746
Mechanical Drive Housing

014658746
903-5912046PC55: RNCC: 3 | RNVC: 1
5912046: RNCC: D | RNVC: 9

24 Jun 1999

3040-01-467-6633
Shaft Idler

014676633
3935229: RNCC: 3 | RNVC: 2
02/912012: RNCC: 5 | RNVC: 2
FV2257163: RNCC: 5 | RNVC: 2
3935229: RNCC: 5 | RNVC: 2
3393374: RNCC: 5 | RNVC: 9

9 Sep 1999

3040-01-474-0109
Straight Shaft

014740109
4067719: RNCC: 3 | RNVC: 2
TH102410: RNCC: 5 | RNVC: 9

20 Apr 2000

3040-01-474-7160
Straight Shaft

014747160
4295480: RNCC: 3 | RNVC: 2
4295480: RNCC: 5 | RNVC: 9
AT156993: RNCC: 5 | RNVC: 9

11 May 2000

3040-01-475-2281
Linear Actuating Cylinder Piston

014752281
3050116: RNCC: 3 | RNVC: 9
3050116: RNCC: 5 | RNVC: 2
AT154678: RNCC: 5 | RNVC: 9

25 May 2000

3040-01-474-2189
Shouldered Shaft

014742189
65850-05166-102: RNCC: 3 | RNVC: 2
65850-05166: RNCC: D | RNVC: 9

27 Apr 2000

3040-01-475-8254
Linear Actuating Cylinder

014758254
41161: RNCC: 3 | RNVC: 2
30093-40940 ITEM 6: RNCC: 5 | RNVC: 2
30093-40940: RNCC: D | RNVC: 9

14 Jun 2000

3040-01-477-3373
Multiple Gears Gearshaft

014773373
9904106407: RNCC: 3 | RNVC: 2

7 Aug 2000

3040-01-477-5128
Shaft Retaining Plate

014775128
74A400705-2001: RNCC: 3 | RNVC: 2
74A400705-2001: RNCC: 5 | RNVC: 2
74A400705-2001: RNCC: 5 | RNVC: 9

10 Aug 2000

3040-01-476-6487
Worm Shaft

014766487
12961324: RNCC: 3 | RNVC: 2

18 Jul 2000

3040-01-477-3452
Linear Actuating Cylinder Cap

014773452
7258001437: RNCC: 3 | RNVC: 2

7 Aug 2000

3040-01-477-6535
Straight Shaft

014776535
8430-65: RNCC: 3 | RNVC: 2

14 Aug 2000

3040-01-478-1827
Airc Straight Shaft

014781827
4308023-1: RNCC: 3 | RNVC: 2

31 Aug 2000

3040-01-478-1825
Airc Gearshaft Spur

014781825
4308015-3: RNCC: 3 | RNVC: 2

31 Aug 2000

3040-01-478-3704
Shouldered Shaft

014783704
EP-0002123: RNCC: 3 | RNVC: 2
A35271.0100: RNCC: 5 | RNVC: 2
A352710100: RNCC: 5 | RNVC: 9

8 Sep 2000

3040-01-478-3634
Cable Brake

014783634
141184: RNCC: 3 | RNVC: 2
PL-C200941L001 REV F IT NO 3: RNCC: 5 | RNVC: 2
PL-C200941R001 REV F IT NO 3: RNCC: 5 | RNVC: 2
1/8D,7X19IWRC R: RNCC: C | RNVC: 1

8 Sep 2000

3040-01-478-7825
Shouldered Shaft

014787825
21340-1004-1: RNCC: 3 | RNVC: 2
21340 FIND 3: RNCC: 5 | RNVC: 2
21340: RNCC: D | RNVC: 9

27 Sep 2000

3040-01-479-5372
Linear Actuating Cylinder Assembly

014795372
791821-001: RNCC: 3 | RNVC: 2
791821: RNCC: D | RNVC: 9

24 Oct 2000

3040-01-478-8216
Spline Drive Shaft

014788216
2746674-1: RNCC: 3 | RNVC: 2

28 Sep 2000

3040-01-480-7476
Rigid Connecting Link

014807476
12474755-2: RNCC: 3 | RNVC: 2
12474755: RNCC: D | RNVC: 9

5 Dec 2000

3040-01-481-0612
Rigid Connecting Link

014810612
12298139-1: RNCC: 3 | RNVC: 2
12298139: RNCC: D | RNVC: 9

15 Dec 2000

3040-01-481-6345
Ai Shouldered Shaft

014816345
10052611: RNCC: 3 | RNVC: 2

18 Jan 2001

3040-01-481-6372
Airc Straight Shaft

014816372
10052634: RNCC: 3 | RNVC: 2

18 Jan 2001

3040-01-482-1286
Linear Actuating Cylinder Piston Rod

014821286
41112: RNCC: 3 | RNVC: 2
LA405-41110 ITEM 2: RNCC: 5 | RNVC: 2

9 Feb 2001

3040-01-482-4989
Rigid Connecting Link

014824989
8100-1251-0192 PC 139: RNCC: 3 | RNVC: 2
8100-1251-0307 PC NO 81: RNCC: 3 | RNVC: 2
8100-1251-0192: RNCC: D | RNVC: 9
8100-1251-0307: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9

26 Feb 2001

3040-01-483-8539
Rigid Connecting Link

014838539
3798647-1: RNCC: 3 | RNVC: 2
3798647-1: RNCC: 5 | RNVC: 9
3799948 FIND 22: RNCC: 5 | RNVC: 9
3799948: RNCC: D | RNVC: 9

10 Apr 2001

3040-01-491-1954
Manual Control Lever

014911954
12329883-2: RNCC: 3 | RNVC: 2
12329883: RNCC: D | RNVC: 9

15 Oct 2001

3040-01-491-3921
Straight Shaft

014913921
H643-7003-79: RNCC: 3 | RNVC: 2
342-7067322-79: RNCC: 5 | RNVC: 2
H643-7003: RNCC: D | RNVC: 9
7067322: RNCC: D | RNVC: 9

19 Oct 2001

3040-01-491-7691
Shouldered Shaft

014917691
61355: RNCC: 3 | RNVC: 2

31 Oct 2001

3040-01-493-4677
Straight Shaft

014934677
24241441: RNCC: 3 | RNVC: 2
24207264: RNCC: 3 | RNVC: 9

8 Jan 2002

3040-01-484-6193
Linear Actuating Cylinder Piston Rod

014846193
4083569: RNCC: 3 | RNVC: 2
923976.2098: RNCC: 5 | RNVC: 2
3820302: RNCC: 5 | RNVC: 9
3820302: RNCC: 5 | RNVC: 9
3899450: RNCC: 5 | RNVC: 9
2815PL1495915: RNCC: 6 | RNVC: 9

2 May 2001

3040-01-484-6164
Shouldered Shaft

014846164
803-6397269 PC NO 80: RNCC: 3 | RNVC: 2
8100-1251-0307 PC NO 106: RNCC: 3 | RNVC: 2
803-6397269: RNCC: D | RNVC: 9
8100-1251-0307: RNCC: D | RNVC: 9

2 May 2001

3040-01-485-1106
Straight Shaft

014851106
111-218-120-414-003: RNCC: 3 | RNVC: 2
D414-21-12-487 ITEM 5: RNCC: 5 | RNVC: 2
111-218-120-414: RNCC: D | RNVC: 9

17 May 2001

3040-01-484-9582
Control Cam Assembly

014849582
5750038-059: RNCC: 3 | RNVC: 2
5750038: RNCC: D | RNVC: 9

11 May 2001

3040-01-495-6854
Links

014956854
09.4697.0004: RNCC: 3 | RNVC: 9
09.4697.0004: RNCC: 5 | RNVC: 2

22 Mar 2002

3040-01-485-8086
Housing Adapter

014858086
6935069: RNCC: 3 | RNVC: 2

7 Jun 2001

3040-01-486-0510
Linear Actuating Cylinder Head

014860510
6931005 ITEM 2: RNCC: 3 | RNVC: 2
6931005-2: RNCC: C | RNVC: 1
6931005: RNCC: D | RNVC: 9

18 Jun 2001

3040-01-486-0260
Linear Actuating Cylinder Assembly

014860260
8038342: RNCC: 3 | RNVC: 2
2786462GK: RNCC: 5 | RNVC: 9
2786462: RNCC: 5 | RNVC: 9

15 Jun 2001

3040-01-485-9635
Shouldered Shaft

014859635
167-7066804-64: RNCC: 3 | RNVC: 2
H547-2002-64: RNCC: 5 | RNVC: 2
7066804: RNCC: D | RNVC: 9

13 Jun 2001

3040-01-486-4461
Linear Actuating Cylinder Piston Rod

014864461
6931004-2: RNCC: 3 | RNVC: 2
6931004: RNCC: D | RNVC: 9

28 Jun 2001

3040-01-487-0344
Mechanically Actuated Spindle

014870344
8100-1251-0284 PC 038: RNCC: 3 | RNVC: 2
8100-1251-0284: RNCC: D | RNVC: 9

23 Jul 2001

3040-01-487-8754
Shaft Retaining Plate

014878754
2195110023: RNCC: 3 | RNVC: 2
2-195-1-10018: RNCC: 5 | RNVC: 9

22 Aug 2001

3040-01-487-6133
Airc Spline Adapter

014876133
101999-54-1: RNCC: 3 | RNVC: 2
101999-3-1: RNCC: 5 | RNVC: 9

12 Aug 2001

3040-01-488-7629
Main Assy Pin

014887629
40001271: RNCC: 3 | RNVC: 2
40001221: RNCC: 5 | RNVC: 9
40337054: RNCC: 5 | RNVC: 9

4 Sep 2001

3040-01-496-2686
Housing Adapter

014962686
7998A13: RNCC: 3 | RNVC: 9

9 Apr 2002

3040-01-496-9273
Rigid Connecting Link

014969273
B-WT76F63SH81 CORNER ROD: RNCC: 3 | RNVC: 2

1 May 2002

3040-01-496-9421
Rigid Connecting Link

014969421
B-WT76F63SH82CRLS: RNCC: 3 | RNVC: 2

2 May 2002

3040-01-497-0382
Disc Brake Caliper

014970382
210739: RNCC: 3 | RNVC: 2

7 May 2002

3040-01-499-0471
Shouldered Shaft

014990471
29533537: RNCC: 3 | RNVC: 2

11 Jul 2002

3040-01-500-9519
Rigid Connecting Link

015009519
169-6985324-A6: RNCC: 3 | RNVC: 2
H545-4001-A6: RNCC: 5 | RNVC: 2
169-6985324: RNCC: D | RNVC: 9

18 Sep 2002

3040-01-500-0236
Shouldered Axle

015000236
7534872-5: RNCC: 3 | RNVC: 2
522-7534872: RNCC: D | RNVC: 9

12 Aug 2002

3040-01-501-6341
Worm Shaft

015016341
596-7409665-2: RNCC: 3 | RNVC: 2
B831-2130-2: RNCC: 5 | RNVC: 2
5967409665: RNCC: D | RNVC: 9

9 Oct 2002

3040-01-501-8661
Linear Actuating Cylinder Assembly Parts Kit

015018661
87399A 2: RNCC: 3 | RNVC: 2

18 Oct 2002

3040-01-501-8572
Linear Actuating Cylinder Assembly

015018572
8M0132609: RNCC: 3 | RNVC: 2
98703A26: RNCC: 5 | RNVC: 9
8M0108279: RNCC: 5 | RNVC: 9

18 Oct 2002

3040-01-503-1051
Bevel Gearshaft

015031051
786204: RNCC: 3 | RNVC: 2
786204: RNCC: 5 | RNVC: 2

4 Dec 2002

3040-01-503-6465
Rigid Connecting Link

015036465
6623516: RNCC: 3 | RNVC: 2
6623516: RNCC: 5 | RNVC: 9

2 Jan 2003

3040-01-503-6472
Rigid Connecting Link

015036472
6623526: RNCC: 3 | RNVC: 2
6623526: RNCC: 5 | RNVC: 9

2 Jan 2003

3040-01-503-7928
Linear Actuating Cylinder Piston

015037928
596-7410400-3: RNCC: 3 | RNVC: 2
B434-5500-3: RNCC: 5 | RNVC: 2
7410400: RNCC: D | RNVC: 9

8 Jan 2003

3040-01-504-7160
Manual Control Lever

015047160
LE9083: RNCC: 3 | RNVC: 2
LE9083A: RNCC: 3 | RNVC: 9

6 Feb 2003

3040-01-504-2873
Shouldered Shaft

015042873
7135922: RNCC: 3 | RNVC: 2
7135922: RNCC: 5 | RNVC: 9

24 Jan 2003

3040-01-505-6065
Straight Axle

015056065
159-0961: RNCC: 3 | RNVC: 2

11 Mar 2003

3040-01-505-0170
Rigid Connecting Link

015050170
3518-24: RNCC: 3 | RNVC: 2

19 Feb 2003

3040-01-505-6048
Straight Axle

015056048
154-5278: RNCC: 3 | RNVC: 2
CV161022D: RNCC: 5 | RNVC: 2
154-5278: RNCC: 5 | RNVC: 2

11 Mar 2003

3040-01-506-1407
Stub Wheel

015061407
22180780: RNCC: 3 | RNVC: 2

24 Mar 2003

3040-01-506-7737
Linear Actuating Cylinder Assembly

015067737
133936A1: RNCC: 3 | RNVC: 2
LTA20084: RNCC: 5 | RNVC: 2
LTA-A12-109-001 ITEM 1: RNCC: 5 | RNVC: 2

9 Apr 2003

3040-01-507-5715
Linear Actuating Cylinder Piston

015075715
596-7409215-17: RNCC: 3 | RNVC: 2
B434-2220-17: RNCC: 5 | RNVC: 2
7409215: RNCC: D | RNVC: 9

1 May 2003

3040-01-507-2783
Rigid Connecting Link

015072783
K4-2338-52: RNCC: 3 | RNVC: 2

24 Apr 2003

3040-01-510-3134
Shaft Collar

015103134
7379216 PC 25: RNCC: 3 | RNVC: 2

17 Jul 2003

3040-01-512-8220
Linear Actuating Cylinder Head

015128220
2HA960: RNCC: 3 | RNVC: 2
2HA960: RNCC: 3 | RNVC: 9
4900214-509: RNCC: 5 | RNVC: 2
900214-509: RNCC: 5 | RNVC: 9

10 Sep 2003

3040-01-513-4478
Straight Shaft

015134478
3336851: RNCC: 3 | RNVC: 2
3336851: RNCC: 3 | RNVC: 9

25 Sep 2003

3040-01-513-8651
Hub Clamp

015138651
8405204: RNCC: 3 | RNVC: 2
8405204: RNCC: 5 | RNVC: 9
8405204: RNCC: 5 | RNVC: 9

8 Oct 2003

3040-01-512-8765
Body Hub

015128765
0744682: RNCC: 3 | RNVC: 2

11 Sep 2003

3040-01-514-8799
Linear Actuating Cylinder Piston

015148799
41948: RNCC: 3 | RNVC: 2
80120-41930 ITEM 11: RNCC: 5 | RNVC: 2
80120-41930: RNCC: D | RNVC: 9

7 Nov 2003

3040-01-514-0477
Straight Shaft

015140477
3467903: RNCC: 1 | RNVC: 2
10068617: RNCC: 3 | RNVC: 2
10068617: RNCC: 5 | RNVC: 2
3467903: RNCC: 5 | RNVC: 9
3040015140477: RNCC: 6 | RNVC: 9
36638: RNCC: D | RNVC: 9

15 Oct 2003

3040-01-514-9613
Nonaircraft Mechanical Actuator

015149613
2101560-001: RNCC: 3 | RNVC: 2
2101560 ASSY 2101560-001: RNCC: 5 | RNVC: 9
2101560: RNCC: D | RNVC: 9

12 Nov 2003

3040-01-515-0379
Push-Pull Control Assembly

015150379
3333091: RNCC: 3 | RNVC: 2
3333091: RNCC: 3 | RNVC: 9

13 Nov 2003

3040-01-515-2069
Shouldered Shaft

015152069
1KK266: RNCC: 3 | RNVC: 2
1KK266: RNCC: 3 | RNVC: 9
6502840: RNCC: 5 | RNVC: 9

18 Nov 2003

3040-01-515-2308
Shouldered Shaft

015152308
8100-1251-0298 PT NO. 310: RNCC: 3 | RNVC: 2
8100-1251-0298 PC 310: RNCC: 5 | RNVC: 2

19 Nov 2003

3040-01-516-0764
Shaft Collar

015160764
6462K13: RNCC: 3 | RNVC: 2
3087AS100-39: RNCC: 5 | RNVC: 9

18 Dec 2003

3040-01-516-5268
Flexible Shaft Assembly

015165268
57353-140: RNCC: 3 | RNVC: 2

9 Jan 2004

3040-01-517-0254
Shouldered Shaft

015170254
556-7106780-1: RNCC: 3 | RNVC: 2
H792-8003-1: RNCC: 5 | RNVC: 2

28 Jan 2004

3040-01-517-3676
Linear Actuating Cylinder

015173676
150060-18: RNCC: 3 | RNVC: 2

6 Feb 2004

3040-01-517-7013
Rotating Shaft Eye Bracket

015177013
7-07-267: RNCC: 3 | RNVC: 2

18 Feb 2004

3040-01-518-1989
Brake Disc

015181989
PL79221 ITEM 8: RNCC: 3 | RNVC: 9
75072: RNCC: 5 | RNVC: 2

4 Mar 2004

3040-01-518-2470
Linear Actuating Cylinder Assembly Parts Kit

015182470
R433014756: RNCC: 3 | RNVC: 2
R433014756: RNCC: 3 | RNVC: 9
P104227-K0000: RNCC: 5 | RNVC: 9

5 Mar 2004

3040-01-518-2480
Linear Actuating Cylinder Piston

015182480
C-18658 PL HP-7: RNCC: 3 | RNVC: 2

5 Mar 2004

3040-01-521-7377
Straight Shaft Assembly

015217377
N7437: RNCC: 3 | RNVC: 2
10025589: RNCC: 5 | RNVC: 2

1 Jul 2004

3040-01-521-9230
Shaft Collar

015219230
240-SC-75: RNCC: 3 | RNVC: 2
240-SC-75: RNCC: 3 | RNVC: 9
240-SC-75: RNCC: 5 | RNVC: 2

12 Jul 2004

3040-01-522-1343
Shouldered Shaft

015221343
793574-7: RNCC: 3 | RNVC: 2

20 Jul 2004

3040-01-522-5872
Linear Actuating Cylinder Piston

015225872
106-0303: RNCC: 3 | RNVC: 2
506-3005 PC. NO. 8: RNCC: 5 | RNVC: 2
506-3005: RNCC: D | RNVC: 9

4 Aug 2004

3040-01-522-9152
Control Cam

015229152
0113550-09: RNCC: 3 | RNVC: 2
0113550-11: RNCC: 5 | RNVC: 9
0113550: RNCC: D | RNVC: 9

13 Aug 2004

3040-01-522-9544
Piston Ring

015229544
PT007-005: RNCC: 3 | RNVC: 2
3-6065 ITEM 13: RNCC: 5 | RNVC: 2

14 Aug 2004

3040-01-523-3694
Rigid Connecting Link

015233694
MT57M1240-1: RNCC: 3 | RNVC: 2
3040PL0669945: RNCC: 6 | RNVC: 9
MT57M1240: RNCC: D | RNVC: 9

31 Aug 2004

3040-01-523-7754
Housing Adapter

015237754
29509994: RNCC: 3 | RNVC: 2

15 Sep 2004

3040-01-524-2173
Hydraulic Control Assembly

015242173
155G3040: RNCC: 3 | RNVC: 2
245195: RNCC: 5 | RNVC: 2
155G3041: RNCC: 5 | RNVC: 9

24 Sep 2004

3040-01-524-3942
Worm Wheel Gearshaft

015243942
6556521: RNCC: 3 | RNVC: 2
803-7391369PC14: RNCC: 5 | RNVC: 9

30 Sep 2004

3040-01-524-5860
Linear Actuating Cylinder Assembly

015245860
4KK602: RNCC: 3 | RNVC: 2
496-3296: RNCC: 5 | RNVC: 2
4KK602: RNCC: 5 | RNVC: 9
496-3296: RNCC: 5 | RNVC: 9

7 Oct 2004

3040-01-524-7582
Nonrotating Shaft Eye Bracket

015247582
12488057: RNCC: 3 | RNVC: 2

15 Oct 2004

3040-01-524-8519
Differential Spider

015248519
L090HYT: RNCC: 3 | RNVC: 2

19 Oct 2004

3040-01-525-8059
Hub Clamp

015258059
1325451: RNCC: 3 | RNVC: 2
132-5451: RNCC: 5 | RNVC: 2

24 Nov 2004

3040-01-526-4992
Flexible Shaft Assembly

015264992
65042-163FT0IN: RNCC: 3 | RNVC: 2

20 Dec 2004

3040-01-484-1421
Remote Control Lever

014841421
E8CR110-0160: RNCC: 3 | RNVC: 2
E8CR110-0160: RNCC: 5 | RNVC: 9

20 Apr 2001

3040-01-493-6171
Shouldered Shaft

014936171
46530-1: RNCC: 3 | RNVC: 2
46530-1: RNCC: 3 | RNVC: 2

11 Jan 2002

3040-01-493-5254
Shouldered Shaft

014935254
0656D0534G017A: RNCC: 3 | RNVC: 2
999F0904 FIND NO. 11: RNCC: 5 | RNVC: 9
656D0534: RNCC: 5 | RNVC: 9
999F0904: RNCC: D | RNVC: 9

9 Jan 2002

3040-01-493-6578
Control Cable Assembly

014936578
123CV10061-15: RNCC: 3 | RNVC: 2
123CV10061-15: RNCC: 3 | RNVC: 9

14 Jan 2002

3040-01-495-1247
Shaft Collar

014951247
6546C016-1: RNCC: 3 | RNVC: 2
6546C016: RNCC: D | RNVC: 9

7 Mar 2002

3040-01-485-4009
Worm Shaft

014854009
532226-2: RNCC: 3 | RNVC: 2
532226-2: RNCC: 5 | RNVC: 9
532226: RNCC: D | RNVC: 9

24 May 2001

3040-01-518-1946
Nonrotating Shaft Eye Bracket

015181946
9955.0076: RNCC: 3 | RNVC: 2

4 Mar 2004

3040-01-491-4237
Shouldered Shaft Assembly

014914237
90016-1: RNCC: 3 | RNVC: 2

22 Oct 2001

3040-01-491-5720
Flexible Shaft Assembly

014915720
22001-100 X 196IN: RNCC: 3 | RNVC: 2
22001-100 X 16FT 4IN: RNCC: 5 | RNVC: 2
B-409-22001-100: RNCC: 5 | RNVC: 9
22001: RNCC: D | RNVC: 9

25 Oct 2001

3040-01-491-5724
Flexible Shaft Assembly

014915724
22001-100 X 277IN: RNCC: 3 | RNVC: 2
22001-100 X 23FT 1IN: RNCC: 5 | RNVC: 2
B-409-22001-100: RNCC: 5 | RNVC: 9
22001: RNCC: D | RNVC: 9

25 Oct 2001

3040-01-491-5731
Flexible Shaft Assembly

014915731
22001-100 X 347IN: RNCC: 3 | RNVC: 2
22001-100 X 28FT 11IN: RNCC: 5 | RNVC: 2
B-409-22001-100: RNCC: 5 | RNVC: 9
22001: RNCC: D | RNVC: 9

25 Oct 2001

3040-01-492-2756
Spline Adapter

014922756
6681/2-029-004: RNCC: 3 | RNVC: 2
KH6817PL FIND NO. 3: RNCC: 5 | RNVC: 9

20 Nov 2001

3040-01-493-3398
Worm Shaft

014933398
596-7409312-27: RNCC: 3 | RNVC: 2
B541-1013-27: RNCC: 5 | RNVC: 2
B831-2410 FN 3: RNCC: 5 | RNVC: 2
B541-1013: RNCC: D | RNVC: 9
B831-2410: RNCC: D | RNVC: 9
7409312: RNCC: D | RNVC: 9

28 Dec 2001

3040-01-457-9194
Shaft Collar

014579194
6916169: RNCC: 3 | RNVC: 2

7 Aug 1998

3040-01-459-0446
Linear Actuating Cylinder Assembly

014590446
6-372-004393: RNCC: 3 | RNVC: 2

18 Sep 1998

3040-01-459-1037
Straight Shaft

014591037
342-6726633 FIND 11: RNCC: 3 | RNVC: 2

21 Sep 1998

3040-01-460-1059
Shouldered Shaft

014601059
9841030204: RNCC: 3 | RNVC: 2
030140 R1 DL07639: RNCC: 5 | RNVC: 2
10302-04: RNCC: 5 | RNVC: 2
8719173: RNCC: D | RNVC: 9

27 Oct 1998

3040-01-460-9003
Linear Actuating Cylinder

014609003
N2217: RNCC: 3 | RNVC: 2
4000-1385 ITEM 2: RNCC: 5 | RNVC: 2
4000-1385: RNCC: D | RNVC: 9

19 Nov 1998

3040-01-461-7514
Adapter Shaft

014617514
74D425008-2033: RNCC: 3 | RNVC: 2

31 Dec 1998

3040-01-462-0630
Mechanical Drive Housing

014620630
1D86457-1: RNCC: 3 | RNVC: 2
1D86457-1: RNCC: 5 | RNVC: 9

20 Jan 1999

3040-01-468-1490
Shaft Retaining Plate

014681490
818613-1: RNCC: 3 | RNVC: 2

30 Sep 1999

3040-01-468-9463
Rigid Connecting Link

014689463
4726-107: RNCC: 3 | RNVC: 2
74B463604-107: RNCC: 7 | RNVC: 2

28 Oct 1999

3040-01-468-8594
Straight Shaft

014688594
6T-0064: RNCC: 3 | RNVC: 9

25 Oct 1999

3040-01-470-5099
Linear Actuating Cylinder Assembly Parts Kit

014705099
7-373-000076: RNCC: 3 | RNVC: 2

22 Dec 1999

3040-01-471-1571
Housing Adapter

014711571
LSCP890019: RNCC: 3 | RNVC: 2

25 Jan 2000

3040-01-471-9297
Counterbalance Weight

014719297
901-015-024-109: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-471-9674
Straight Shaft

014719674
901-040-353-101: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-462-9934
Pawl

014629934
741245-A: RNCC: 3 | RNVC: 2
8-25-24: RNCC: 5 | RNVC: 2

1 Mar 1999

3040-01-464-3376
Shouldered Shaft

014643376
S2419JX3: RNCC: 3 | RNVC: 2
SG4734 ITEM NO 173: RNCC: 7 | RNVC: 2
SG4734: RNCC: D | RNVC: 9

26 Apr 1999

3040-01-464-4702
Rigid Link Half

014644702
4084988: RNCC: 3 | RNVC: 2
4084990: RNCC: D | RNVC: 9
4084989: RNCC: D | RNVC: 9

30 Apr 1999

3040-01-464-2263
Rigid Connecting Link

014642263
6650395: RNCC: 3 | RNVC: 2

21 Apr 1999

3040-01-466-5201
Rigid Connecting Link

014665201
2483159: RNCC: 3 | RNVC: 2

22 Jul 1999

3040-01-467-4374
Manual Control Lever

014674374
0304020008: RNCC: 3 | RNVC: 2
0304020008: RNCC: 5 | RNVC: 9
NMP-707-25: RNCC: 5 | RNVC: 9
NMP-1068-39: RNCC: C | RNVC: 1
030.402.0008: RNCC: C | RNVC: 1
NMP-707: RNCC: D | RNVC: 9

30 Aug 1999

3040-01-472-8531
Rigid Connecting Link

014728531
563-6404331 FIND 48: RNCC: 3 | RNVC: 2
211097301: RNCC: 5 | RNVC: 2
DF6002-416: RNCC: D | RNVC: 9
563-6404331: RNCC: D | RNVC: 9

20 Mar 2000

3040-01-473-8943
Linear Actuating Cylinder Assembly

014738943
1H2H0A00112347: RNCC: 3 | RNVC: 2
AG201174C0: RNCC: 5 | RNVC: 9

19 Apr 2000

3040-01-476-1069
Shaft Collar

014761069
ZH2252: RNCC: 3 | RNVC: 2
060DH2-211 ITEM 9: RNCC: 5 | RNVC: 9
060DH2-211 ITEM 9: RNCC: 5 | RNVC: 9
ZH2252: RNCC: 5 | RNVC: 9
060DH2-211: RNCC: D | RNVC: 9

27 Jun 2000

3040-01-476-5842
Rigid Connecting Link

014765842
124-4322615 PC 59: RNCC: 3 | RNVC: 2
124-4322615: RNCC: D | RNVC: 9

17 Jul 2000

3040-01-477-0172
Shouldered Shaft

014770172
254-7015355PN19: RNCC: 3 | RNVC: 2
H749-3901 19: RNCC: 5 | RNVC: 2
7015355: RNCC: D | RNVC: 9

28 Jul 2000

3040-01-477-3256
Shaft Idler

014773256
9904105987: RNCC: 3 | RNVC: 2

7 Aug 2000

3040-01-477-3379
Multiple Gears Gearshaft

014773379
9904106157: RNCC: 3 | RNVC: 2

7 Aug 2000

3040-01-477-3375
Multiple Gears Gearshaft

014773375
9904106405: RNCC: 3 | RNVC: 2

7 Aug 2000

3040-01-478-9329
Shouldered Shaft

014789329
791826-001: RNCC: 3 | RNVC: 2

3 Oct 2000

3040-01-480-2735
Shaft Collar

014802735
BACF10A1: RNCC: 3 | RNVC: 2
BACF10A1: RNCC: 5 | RNVC: 2

14 Nov 2000

3040-01-480-7297
Shouldered Shaft

014807297
5714968: RNCC: 3 | RNVC: 2
24207247: RNCC: 3 | RNVC: 2
3040PL0739365: RNCC: 6 | RNVC: 9

4 Dec 2000

3040-01-480-0391
Shouldered Shaft

014800391
12421514: RNCC: 3 | RNVC: 2
12421514: RNCC: 5 | RNVC: 2
12421514: RNCC: 5 | RNVC: 2

6 Nov 2000

3040-01-481-0126
Linear Actuating Cylinder

014810126
B94259-001: RNCC: 3 | RNVC: 2
B94259-001: RNCC: 5 | RNVC: 9

14 Dec 2000

3040-01-481-9990
Bevel Gearshaft

014819990
802250: RNCC: 3 | RNVC: 9
802250: RNCC: C | RNVC: 1

2 Feb 2001

3040-01-482-3660
Bell Crank

014823660
803-6397269 ITEM 95: RNCC: 3 | RNVC: 2
8100-1251-0307 PC NO 95: RNCC: 5 | RNVC: 2
8100-1251-0307: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9

20 Feb 2001

3040-01-482-7689
Linear Actuating Cylinder Piston Rod

014827689
3253362-1: RNCC: 3 | RNVC: 2
3253362-1: RNCC: 3 | RNVC: 2
3799813 FIND 20: RNCC: 5 | RNVC: 9
3799813: RNCC: D | RNVC: 9

2 Mar 2001

3040-01-482-9933
Straight Shaft

014829933
7103271-1: RNCC: 3 | RNVC: 2
7103271: RNCC: D | RNVC: 9

13 Mar 2001

3040-01-482-9365
Rigid Connecting Link

014829365
8100-1251-0307 PC NO 78: RNCC: 3 | RNVC: 2
8100-1251-0307: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9

9 Mar 2001

3040-01-483-3825
Shouldered Shaft

014833825
DAFD0013: RNCC: 3 | RNVC: 2

27 Mar 2001

3040-01-482-9039
Rigid Connecting Link

014829039
167-7563785 PC NO.90: RNCC: 3 | RNVC: 2
8100-1251-0307 PC NO 90: RNCC: 3 | RNVC: 2
803-6397269 PC NO 64: RNCC: 5 | RNVC: 2
803-6397268 PC NO 90: RNCC: 5 | RNVC: 2
6397268: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9
8100-1251-0307: RNCC: D | RNVC: 9

8 Mar 2001

3040-01-484-0127
Shouldered Shaft

014840127
2149905: RNCC: 3 | RNVC: 2
2149905: RNCC: C | RNVC: 1

16 Apr 2001

3040-01-486-7571
Rigid Connecting Link

014867571
S14394203-207: RNCC: 3 | RNVC: 2
SI4394203-207: RNCC: C | RNVC: 1

13 Jul 2001

3040-01-488-6097
Linear Actuating Cylinder

014886097
721-7069909-35: RNCC: 3 | RNVC: 2
H861-1505-35: RNCC: 5 | RNVC: 2
H861-1505: RNCC: D | RNVC: 9
7069909: RNCC: D | RNVC: 9

29 Aug 2001

3040-01-488-7645
Rigid Connecting Link

014887645
52001578: RNCC: 3 | RNVC: 2

4 Sep 2001

3040-01-489-1807
Piston Rod Guide

014891807
7261661 PC 3: RNCC: 3 | RNVC: 2
7261661: RNCC: D | RNVC: 9

14 Sep 2001

3040-01-495-0092
Rigid Connecting Link

014950092
711599K1: RNCC: 3 | RNVC: 2

4 Mar 2002

3040-01-495-0525
Shouldered Shaft

014950525
6546D091-1: RNCC: 3 | RNVC: 2
6546D091-1: RNCC: 5 | RNVC: 2
6546D091: RNCC: D | RNVC: 9

5 Mar 2002

3040-01-495-1279
Straight Shaft

014951279
6546C024-1: RNCC: 3 | RNVC: 2
6546C024-1: RNCC: 5 | RNVC: 2
6546C024: RNCC: D | RNVC: 9

7 Mar 2002

3040-01-495-2848
Linear Actuating Cylinder Assembly

014952848
02065: RNCC: 3 | RNVC: 2

12 Mar 2002

3040-01-495-5548
Body Hub

014955548
6546C055-1: RNCC: 3 | RNVC: 2
6546E206 ITEM 8: RNCC: 5 | RNVC: 2
6546C055: RNCC: D | RNVC: 9
6546E206: RNCC: D | RNVC: 9

20 Mar 2002

3040-01-495-6210
Breather M 10X1

014956210
07.0711.0116: RNCC: 3 | RNVC: 2
116792: RNCC: 5 | RNVC: 2

21 Mar 2002

3040-01-495-9676
Worm Shaft

014959676
46-2406-1: RNCC: 3 | RNVC: 2

28 Mar 2002

3040-01-496-2231
Shouldered Shaft

014962231
581-6985420-9: RNCC: 3 | RNVC: 2
218030137: RNCC: 5 | RNVC: 2
H611-1404-9: RNCC: 5 | RNVC: 2
H611-1404: RNCC: D | RNVC: 9
6985420: RNCC: D | RNVC: 9

8 Apr 2002

3040-01-497-7881
Multiple Disk Brake

014977881
8019332-001: RNCC: 3 | RNVC: 2

5 Jun 2002

3040-01-497-8525
Straight Shaft

014978525
167-7066792-21: RNCC: 3 | RNVC: 2
H547-1117-21: RNCC: 5 | RNVC: 2
167-7066792: RNCC: D | RNVC: 9

6 Jun 2002

3040-01-498-0846
Rotating Shaft Eye Bracket

014980846
137785: RNCC: 3 | RNVC: 2

13 Jun 2002

3040-01-499-4686
Rigid Connecting Link

014994686
167-7066791-97: RNCC: 3 | RNVC: 2
H547-1112-97: RNCC: 5 | RNVC: 2
H547-1112: RNCC: D | RNVC: 9
7066791: RNCC: D | RNVC: 9

24 Jul 2002

3040-01-501-1687
Airc Clamp Set Assy

015011687
901-011-221-113: RNCC: 3 | RNVC: 2

26 Sep 2002

3040-01-502-0827
Spur Gearshaft

015020827
2075-0093: RNCC: 3 | RNVC: 2

24 Oct 2002

3040-01-503-6466
Rigid Connecting Link

015036466
6623517: RNCC: 3 | RNVC: 2
6623517: RNCC: 5 | RNVC: 9

2 Jan 2003

3040-01-505-2304
Shouldered Shaft

015052304
157D3327: RNCC: 3 | RNVC: 2

27 Feb 2003

3040-01-505-3009
Shaft Collar

015053009
4544B70G01: RNCC: 3 | RNVC: 2
4D96314 ITEM 40: RNCC: 5 | RNVC: 2
4D96348 ITEM 45: RNCC: 5 | RNVC: 2
4D98023 ITEM 90: RNCC: 5 | RNVC: 2
4D96314: RNCC: D | RNVC: 9
4D96348: RNCC: D | RNVC: 9
4544B70: RNCC: D | RNVC: 9
4D98023: RNCC: D | RNVC: 9

3 Mar 2003

3040-01-506-0686
Straight Axle

015060686
125-1037: RNCC: 3 | RNVC: 2

21 Mar 2003

3040-01-507-0437
Shouldered Shaft

015070437
173423: RNCC: 3 | RNVC: 2
20728015 REV D: RNCC: 5 | RNVC: 2
20728002 REV M FN8: RNCC: 5 | RNVC: 2
20728015: RNCC: D | RNVC: 9

17 Apr 2003

3040-01-508-0469
Shaft Collar

015080469
6436K32: RNCC: 3 | RNVC: 2

12 May 2003

3040-01-510-2165
Water Filter Hsg W-Head

015102165
1025993: RNCC: 3 | RNVC: 2

15 Jul 2003

3040-01-510-3147
Shaft Collar

015103147
7379216 PC 24: RNCC: 3 | RNVC: 2

17 Jul 2003

3040-01-511-5482
Shouldered Shaft

015115482
27053MS001: RNCC: 3 | RNVC: 2
27053MS: RNCC: 5 | RNVC: 9

12 Aug 2003

3040-01-513-4604
Pivot Shaft Assembly

015134604
3409841: RNCC: 3 | RNVC: 2
3409841: RNCC: 3 | RNVC: 9

25 Sep 2003

3040-01-513-5326
Rigid Connecting Link

015135326
7250149: RNCC: 3 | RNVC: 2

29 Sep 2003

3040-01-513-5816
Control Cam

015135816
3035-560: RNCC: 3 | RNVC: 2

30 Sep 2003

3040-01-513-7432
Linear Actuating Cylinder Piston Rod

015137432
8036231: RNCC: 3 | RNVC: 2
8036231: RNCC: 5 | RNVC: 9
075VC0053: RNCC: 5 | RNVC: 9

4 Oct 2003

3040-01-514-0032
Push-Pull Control Assembly

015140032
CCX63315: RNCC: 3 | RNVC: 2
CC63315: RNCC: 5 | RNVC: 2

14 Oct 2003

3040-01-515-3035
Nonaircraft Mechanical Actuator

015153035
3E8796: RNCC: 3 | RNVC: 2

20 Nov 2003

3040-01-515-8313
Straight Shaft

015158313
52131-1027-1: RNCC: 3 | RNVC: 2
52131 FIND 14: RNCC: 5 | RNVC: 2

10 Dec 2003

3040-01-515-7916
Linear Actuating Cylinder

015157916
1622368: RNCC: 3 | RNVC: 2
CMG/131341: RNCC: 5 | RNVC: 2
131341: RNCC: 5 | RNVC: 9
13141: RNCC: 5 | RNVC: 9
CMG/13141: RNCC: 5 | RNVC: 9

9 Dec 2003

3040-01-516-9233
Lever Arm Assembly

015169233
1KK505: RNCC: 3 | RNVC: 2
1KK505: RNCC: 3 | RNVC: 9
6502933: RNCC: 5 | RNVC: 9

24 Jan 2004

3040-01-518-1995
Brake Disc

015181995
PL79221 ITEM 10: RNCC: 3 | RNVC: 9
74996: RNCC: 5 | RNVC: 2

4 Mar 2004

3040-01-518-4261
Shaft Collar

015184261
2187409: RNCC: 3 | RNVC: 2

11 Mar 2004

3040-01-519-2196
Nonaircraft Mechanical Actuator

015192196
SE 1000 AC 10100 100 PSI: RNCC: 3 | RNVC: 2
SE 1000 AC 10100: RNCC: 5 | RNVC: 1
AVMSE1000V-60: RNCC: 5 | RNVC: 9
AVMSE1000V: RNCC: 5 | RNVC: 9

9 Apr 2004

3040-01-520-7170
Control Cam

015207170
3497002000: RNCC: 3 | RNVC: 2

24 May 2004

3040-01-520-7804
Shaft Collar

015207804
GUN AS3017: RNCC: 3 | RNVC: 2

26 May 2004

3040-01-522-2104
Rigid Connecting Link

015222104
064 568: RNCC: 3 | RNVC: 2
064568: RNCC: 5 | RNVC: 9
04055436002759: RNCC: 5 | RNVC: 9

22 Jul 2004

3040-01-522-2106
Rigid Connecting Link

015222106
064 352: RNCC: 3 | RNVC: 2

22 Jul 2004

3040-01-522-2140
Detent Plate

015222140
99C621-06-DWG-03-A-0: RNCC: 3 | RNVC: 2
HI-721-6000 REV G ITEM 33: RNCC: 5 | RNVC: 1

22 Jul 2004

3040-01-522-4837
Shaft Collar

015224837
6650745: RNCC: 3 | RNVC: 2

31 Jul 2004

3040-01-522-7348
Body Hub

015227348
14 15984 1078: RNCC: 3 | RNVC: 2
14-15501-513: RNCC: 5 | RNVC: 9

10 Aug 2004

3040-01-522-9139
Rigid Connecting Link

015229139
163826: RNCC: 3 | RNVC: 2
163826: RNCC: D | RNVC: 9

13 Aug 2004

3040-01-523-3293
Mechanical Drive Housing Part

015233293
301044-1: RNCC: 3 | RNVC: 2
301044-1: RNCC: 3 | RNVC: 9
SE221N SHT2, 308006 FN-4: RNCC: 5 | RNVC: 9
SE221N SHT2, 308006 FN-4: RNCC: C | RNVC: 1

30 Aug 2004

3040-01-523-6302
Shouldered Shaft

015236302
656C0289J039A: RNCC: 3 | RNVC: 1
993R0049PC14: RNCC: 5 | RNVC: 1

10 Sep 2004

3040-01-524-4230
Flexible Drive Shaft

015244230
HM025-221-3: RNCC: 3 | RNVC: 2

1 Oct 2004

3040-01-525-3149
Bevel Gearshaft

015253149
533113-1: RNCC: 3 | RNVC: 2
533113-1: RNCC: 5 | RNVC: 9
533113: RNCC: D | RNVC: 9

3 Nov 2004

3040-01-525-5077
Rigid Connecting Link

015255077
3317122: RNCC: 3 | RNVC: 2
3317122: RNCC: 3 | RNVC: 9

12 Nov 2004

3040-01-525-5185
Pneumatic Actuator Cylinder Housing

015255185
106274: RNCC: 3 | RNVC: 2

13 Nov 2004

3040-01-525-5199
Linear Actuating Cylinder Head

015255199
112337: RNCC: 3 | RNVC: 2

13 Nov 2004

3040-01-525-5205
Shouldered Shaft

015255205
111226: RNCC: 3 | RNVC: 2

15 Nov 2004

3040-01-525-9843
Straight Shaft

015259843
SH-5.0-72-04-Q-0: RNCC: 3 | RNVC: 2
5.0-72-KQQ-3-Q ITEM 3: RNCC: 5 | RNVC: 2
5.0-72-KQQ-3-Q: RNCC: D | RNVC: 9

2 Dec 2004

3040-01-526-4325
Nonrotating Shaft Eye Bracket

015264325
65066-00: RNCC: 3 | RNVC: 2
P-2380 FN 6: RNCC: 5 | RNVC: 2

16 Dec 2004

3040-01-526-0111
Shouldered Shaft

015260111
210-3328: RNCC: 3 | RNVC: 2

3 Dec 2004

3040-01-497-5122
Rotating Shaft Eye Bracket

014975122
154071: RNCC: 3 | RNVC: 2

22 May 2002

3040-01-497-0545
Push-Pull Control Assembly

014970545
CCX63326: RNCC: 3 | RNVC: 2
32377-003-26FT: RNCC: 3 | RNVC: 9
032377-003-312: RNCC: 5 | RNVC: 9
32377-003-03120: RNCC: 5 | RNVC: 9
32377-003-26FT: RNCC: 5 | RNVC: 9
32377-003-312: RNCC: 5 | RNVC: 9
32377-003-03120: RNCC: 5 | RNVC: 9
32377-003-312: RNCC: 5 | RNVC: 9
032377-003-312: RNCC: 5 | RNVC: 9

8 May 2002

3040-01-497-9980
Ball Joint

014979980
216598: RNCC: 3 | RNVC: 2

11 Jun 2002

3040-01-499-2495
Rigid Connecting Link

014992495
803-5184146 PC 13 PG 3 ZONE 18-D: RNCC: 3 | RNVC: 2
803-5184144 PC 51 PG 2 ZONE 14-C: RNCC: 5 | RNVC: 2
5184146: RNCC: D | RNVC: 9
5184144: RNCC: D | RNVC: 9

17 Jul 2002

3040-01-501-0364
Rigid Connecting Link

015010364
566-7067173-73: RNCC: 3 | RNVC: 2
H625-0312-73: RNCC: 5 | RNVC: 2
566-7067173: RNCC: D | RNVC: 9

20 Sep 2002

3040-01-501-7447
Rigid Connecting Link

015017447
43433: RNCC: 3 | RNVC: 2

15 Oct 2002

3040-01-501-8350
Body Hub

015018350
55074T: RNCC: 3 | RNVC: 2

17 Oct 2002

3040-01-501-9133
Shaft Collar

015019133
805-1624130 PC 8: RNCC: 3 | RNVC: 2
805-1624121 PC 76: RNCC: 5 | RNVC: 9
805-1624121: RNCC: D | RNVC: 9
805-1624130: RNCC: D | RNVC: 9

21 Oct 2002

3040-01-502-3263
Shaft Collar

015023263
50 X 80 RFN 7012: RNCC: 3 | RNVC: 2
SC3040-0008-1: RNCC: 7 | RNVC: 9

1 Nov 2002

3040-01-503-2319
Shouldered Shaft

015032319
1319447: RNCC: 3 | RNVC: 2
734309379: RNCC: 5 | RNVC: 9
1319447: RNCC: 5 | RNVC: 9

9 Dec 2002

3040-01-501-3424
Shouldered Shaft

015013424
585-6726941-46: RNCC: 3 | RNVC: 2
15089093: RNCC: 5 | RNVC: 2
6726941: RNCC: D | RNVC: 9

1 Oct 2002

3040-01-503-7395
Counterbalance Weight

015037395
5126T81P04: RNCC: 3 | RNVC: 2
5126T81P04: RNCC: 5 | RNVC: 9

7 Jan 2003

3040-01-501-6945
Rigid Connecting Link

015016945
805-1626510 PC 12: RNCC: 3 | RNVC: 2
1626510: RNCC: D | RNVC: 9

10 Oct 2002

3040-01-504-3480
Rigid Connecting Link

015043480
7138785: RNCC: 3 | RNVC: 2
7138785: RNCC: 5 | RNVC: 9

27 Jan 2003

3040-01-504-9110
Spur Gearshaft

015049110
596-7409253-10: RNCC: 3 | RNVC: 2
596-7410365-31: RNCC: 5 | RNVC: 2
B434-8205-31: RNCC: 5 | RNVC: 2
B434-8212-10: RNCC: 5 | RNVC: 2
7410365: RNCC: D | RNVC: 9
7409253: RNCC: D | RNVC: 9

13 Feb 2003

3040-01-504-8488
Rigid Connecting Link

015048488
69-9605-5: RNCC: 3 | RNVC: 2

12 Feb 2003

3040-01-505-8143
Rigid Connecting Link

015058143
Q7924-04- R4 REF 10: RNCC: 3 | RNVC: 2
Q7924-05-R4 REF 10: RNCC: 3 | RNVC: 2
IM-LPD-004: RNCC: 5 | RNVC: 2

17 Mar 2003

3040-01-506-5540
Linear Actuating Cylinder Assembly

015065540
863-000204: RNCC: 3 | RNVC: 2
0.75DSRM1.00: RNCC: 5 | RNVC: 9

2 Apr 2003

3040-01-506-3413
Mechanically Actuated Spindle

015063413
12064-44: RNCC: 3 | RNVC: 2
12344 ITEM 2: RNCC: 5 | RNVC: 2
A-801-12064-44: RNCC: 5 | RNVC: 2

27 Mar 2003

3040-01-505-9352
Rigid Connecting Link

015059352
12422797: RNCC: 3 | RNVC: 2
12422797: RNCC: 5 | RNVC: 2
12422797: RNCC: 5 | RNVC: 2

19 Mar 2003

3040-01-507-3078
Rigid Connecting Link

015073078
LSCP580188: RNCC: 3 | RNVC: 2

24 Apr 2003

3040-01-507-0608
Inertia Damper

015070608
22KP193: RNCC: 1 | RNVC: 2
167-8121: RNCC: 3 | RNVC: 2
167-8121: RNCC: 5 | RNVC: 2
7C8444: RNCC: 5 | RNVC: 9
7C8444: RNCC: 5 | RNVC: 9
222-5782: RNCC: D | RNVC: 9

17 Apr 2003

3040-01-507-0796
Mechanical Drive Housing

015070796
3920519: RNCC: 3 | RNVC: 2
3936256: RNCC: 3 | RNVC: 2

18 Apr 2003

3040-01-509-1219
Helical Gear And Shaft Assembly

015091219
3896047: RNCC: 3 | RNVC: 2
3054619: RNCC: 5 | RNVC: 9
3054619: RNCC: 5 | RNVC: 9
3896047: RNCC: 5 | RNVC: 9

12 Jun 2003

3040-01-511-5512
Linear Actuating Cylinder Assembly

015115512
2717095: RNCC: 3 | RNVC: 2
6623849: RNCC: 3 | RNVC: 2
6623849: RNCC: 5 | RNVC: 9

12 Aug 2003

3040-01-512-4264
Shouldered Shaft Assembly

015124264
CE-202-10181: RNCC: 3 | RNVC: 9
202-10181: RNCC: 5 | RNVC: 9

29 Aug 2003

3040-01-512-4560
Shouldered Shaft

015124560
DAF3521D408-001: RNCC: 3 | RNVC: 2
DAF3521D408-001: RNCC: 5 | RNVC: 9
DAF3521D408: RNCC: D | RNVC: 9

2 Sep 2003

3040-01-512-4854
Shouldered Shaft Assembly

015124854
D35-007-1210: RNCC: 3 | RNVC: 2
D35XGTTTTTCG REF NO 61: RNCC: 5 | RNVC: 2

2 Sep 2003

3040-01-512-7428
Friction Lining

015127428
A107536-101-11 ITEM 8: RNCC: 3 | RNVC: 2
A107753-101-11: RNCC: 3 | RNVC: 9
A107536-101-11 ITEM 8: RNCC: 5 | RNVC: 9
A107536-102-11 ITEM 8: RNCC: 5 | RNVC: 9
A107753-101-11: RNCC: C | RNVC: 1
A107536-102-11 ITEM 8: RNCC: C | RNVC: 1

9 Sep 2003

3040-01-512-9157
Body Hub

015129157
0744688: RNCC: 3 | RNVC: 2
TM S6226-R7-MMC-010 FIG 7-3-1: RNCC: 5 | RNVC: 9

12 Sep 2003

3040-01-512-9198
Rigid Connecting Link

015129198
3930AS523: RNCC: 3 | RNVC: 2
3930AS523: RNCC: 5 | RNVC: 2
3930AS523: RNCC: 5 | RNVC: 2
3930AS523: RNCC: 5 | RNVC: 2
3930AS523: RNCC: 5 | RNVC: 2
3930AS523: RNCC: 5 | RNVC: 2
74A733110-2005: RNCC: 5 | RNVC: 9

12 Sep 2003

3040-01-513-0810
Spur Gearshaft

015130810
PX-10732: RNCC: 3 | RNVC: 2

17 Sep 2003

3040-01-513-4845
Brake Shoe

015134845
527766-80: RNCC: 3 | RNVC: 2
527766-80: RNCC: 5 | RNVC: 2

26 Sep 2003

3040-01-513-8090
Shouldered Shaft

015138090
7027211: RNCC: 3 | RNVC: 2
0730 309 430: RNCC: 5 | RNVC: 2
0734 309 430: RNCC: 5 | RNVC: 9
8036754: RNCC: 5 | RNVC: 9
0734 309 278: RNCC: 5 | RNVC: 9
8036754: RNCC: 5 | RNVC: 9

7 Oct 2003

3040-01-513-9031
Push-Pull Control Assembly

015139031
83001-402: RNCC: 3 | RNVC: 2

9 Oct 2003

3040-01-514-8411
Shouldered Shaft

015148411
42112: RNCC: 3 | RNVC: 2
12M23-42110 ITEM 2: RNCC: 5 | RNVC: 2
12M23-42110: RNCC: D | RNVC: 9

6 Nov 2003

3040-01-515-6460
Straight Shaft

015156460
018963: RNCC: 3 | RNVC: 2

3 Dec 2003

3040-01-516-5331
Pawl

015165331
709-5486674 ITEM 52: RNCC: 3 | RNVC: 2
5486674 ITEM 52: RNCC: 5 | RNVC: 2
5486674: RNCC: D | RNVC: 9

9 Jan 2004

3040-01-516-5269
Flexible Shaft Assembly

015165269
57353-138: RNCC: 3 | RNVC: 2

9 Jan 2004

3040-01-516-5764
Linear Actuating Cylinder Assembly

015165764
20729485 REV C: RNCC: 3 | RNVC: 2
174010: RNCC: 5 | RNVC: 2

12 Jan 2004

3040-01-517-3679
Linear Actuating Cylinder Cap

015173679
150060-19: RNCC: 3 | RNVC: 2

6 Feb 2004

3040-01-517-5781
Linear Actuating Cylinder Piston

015175781
89U089264BB0400: RNCC: 3 | RNVC: 2
80-4170: RNCC: 5 | RNVC: 2
EAA-8350-90 PSI: RNCC: 5 | RNVC: 9
EAA-8350-U-90: RNCC: 5 | RNVC: 9

12 Feb 2004

3040-01-518-8555
P4 Spindle

015188555
29530504: RNCC: 3 | RNVC: 2
16KP807: RNCC: 5 | RNVC: 2
16KP807: RNCC: 5 | RNVC: 9

25 Mar 2004

3040-01-519-5144
Linear Actuating Cylinder Assembly

015195144
2HA958: RNCC: 3 | RNVC: 2
2HA958: RNCC: 3 | RNVC: 9
4900214-005: RNCC: 5 | RNVC: 2

22 Apr 2004

3040-01-520-8771
Manual Control Lever

015208771
305-2087: RNCC: 3 | RNVC: 9
4KK515: RNCC: 5 | RNVC: 2
496-3261: RNCC: 5 | RNVC: 2
305-2087: RNCC: 5 | RNVC: 2
496-3261: RNCC: 5 | RNVC: 9
4KK515: RNCC: 5 | RNVC: 9

1 Jun 2004

3040-01-520-8805
Linear Actuating Cylinder Piston

015208805
356-4967: RNCC: 3 | RNVC: 9
4KK539: RNCC: 5 | RNVC: 2
356-4967: RNCC: 5 | RNVC: 2
4KK539: RNCC: 5 | RNVC: 9

1 Jun 2004

3040-01-521-1628
Mechanical Drive Housing

015211628
880686A51: RNCC: 3 | RNVC: 2
1600-880686A51: RNCC: 5 | RNVC: 9
1623-859399T15: RNCC: 5 | RNVC: 9

12 Jun 2004

3040-01-522-1668
Nonaircraft Mechanical Actuator

015221668
15881602-1: RNCC: 3 | RNVC: 2
15881602-1: RNCC: 3 | RNVC: 9
1588 ITEM 9: RNCC: 5 | RNVC: 9
1588 ITEM 9: RNCC: C | RNVC: 1

21 Jul 2004

3040-01-522-2113
Linear Actuating Cylinder Assembly

015222113
064 346: RNCC: 3 | RNVC: 2

22 Jul 2004

3040-01-520-9165
Flexible Shaft Assembly

015209165
596-7410500-34: RNCC: 3 | RNVC: 2
218040624: RNCC: 5 | RNVC: 2
B4345111-34: RNCC: 5 | RNVC: 9

2 Jun 2004

3040-01-522-9138
Rigid Connecting Link

015229138
163825: RNCC: 3 | RNVC: 2
163825: RNCC: D | RNVC: 9

13 Aug 2004

3040-01-523-0954
Shouldered Shaft Assembly

015230954
7377912: RNCC: 3 | RNVC: 2
7377912: RNCC: 5 | RNVC: 9

20 Aug 2004

3040-01-523-7215
Sun Gear

015237215
13977: RNCC: 3 | RNVC: 2
4100666: RNCC: 5 | RNVC: 2
4100666: RNCC: 5 | RNVC: 9

14 Sep 2004

3040-01-525-1028
Straight Shaft

015251028
05079301: RNCC: 3 | RNVC: 2

28 Oct 2004

3040-01-526-4297
Push-Pull Control Assembly Parts Kit

015264297
65205-00: RNCC: 3 | RNVC: 2
P-2380 FN 7: RNCC: 5 | RNVC: 2

16 Dec 2004

3040-01-526-4988
Flexible Shaft Assembly

015264988
65042-134FT0IN: RNCC: 3 | RNVC: 2

20 Dec 2004

3040-01-495-2850
Linear Actuating Cylinder Assembly

014952850
02055: RNCC: 3 | RNVC: 2

12 Mar 2002

3040-01-457-7085
Rigid Connecting Link

014577085
12465875: RNCC: 3 | RNVC: 2

31 Jul 1998

3040-01-458-7074
Pawl

014587074
26534-1: RNCC: 3 | RNVC: 2
26534-4: RNCC: 5 | RNVC: 9
26534: RNCC: D | RNVC: 9

4 Sep 1998

3040-01-459-3175
Shouldered Shaft

014593175
8100-1251-0192 PC 66: RNCC: 3 | RNVC: 2
8100-1251-0192: RNCC: D | RNVC: 9

26 Sep 1998

3040-01-459-5223
Worm Shaft

014595223
167-6404330 FIND 98: RNCC: 3 | RNVC: 2
167-6404330: RNCC: 5 | RNVC: 9

5 Oct 1998

3040-01-459-7123
Shouldered Shaft

014597123
8100-1251-0192 PC 119: RNCC: 3 | RNVC: 2
8100-1251-0192: RNCC: D | RNVC: 9

13 Oct 1998

3040-01-460-2513
Manual Control Lever Assembly

014602513
8451827: RNCC: 3 | RNVC: 9

30 Oct 1998

3040-01-460-0506
Alteration Housing

014600506
22194: RNCC: 3 | RNVC: 2

23 Oct 1998

3040-01-461-3232
Piston Ring

014613232
82117: RNCC: 3 | RNVC: 9
82117: RNCC: 5 | RNVC: 9

9 Dec 1998

3040-01-461-4749
Rigid Connecting Link

014614749
3Q779D-1: RNCC: 3 | RNVC: 2

15 Dec 1998

3040-01-459-9431
Shouldered Shaft

014599431
6-810-001610: RNCC: 3 | RNVC: 9
6-810-001610: RNCC: 5 | RNVC: 2

20 Oct 1998

3040-01-462-5032
Pivot Shaft Assembly

014625032
3121863: RNCC: 3 | RNVC: 2
3121863: RNCC: 5 | RNVC: 9

5 Feb 1999

3040-01-469-3480
Straight Shaft

014693480
759477: RNCC: 3 | RNVC: 2

15 Nov 1999

3040-01-470-8717
Rigid Connecting Link

014708717
74A425127-1001: RNCC: 3 | RNVC: 2
74A425127-1001: RNCC: 5 | RNVC: 9

13 Jan 2000

3040-01-471-9295
Counterbalance Weight

014719295
901-015-024-105: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-471-9915
Rigid Connecting Link

014719915
901-031-635-101: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-471-9917
Rigid Connecting Link

014719917
901-031-635-105: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-472-1771
Shouldered Shaft

014721771
7-317237336-1: RNCC: 3 | RNVC: 2
7-317237336: RNCC: D | RNVC: 9

18 Feb 2000

3040-01-462-9926
Counterbalance Weight

014629926
741159-A: RNCC: 3 | RNVC: 2
8-39-7: RNCC: 5 | RNVC: 2

1 Mar 1999

3040-01-462-9707
Manual Control Lever Assembly

014629707
707907-K2: RNCC: 3 | RNVC: 2
8-7-11: RNCC: 5 | RNVC: 2
707907K02: RNCC: 5 | RNVC: 2

26 Feb 1999

3040-01-463-4253
Rigid Connecting Link

014634253
803-6397269 PC53 ZINC PLATED: RNCC: 3 | RNVC: 2
167-6926161 PC184 ZINC PLATED: RNCC: 5 | RNVC: 2
8100-1251-0307 PC NO 79: RNCC: C | RNVC: 1
6397269: RNCC: D | RNVC: 9

19 Mar 1999

3040-01-463-5587
Interl Piston Cover

014635587
768747: RNCC: 3 | RNVC: 2

26 Mar 1999

3040-01-463-5334
Shouldered Shaft

014635334
167-6926191 PC146: RNCC: 3 | RNVC: 2
LH5167617 PC146: RNCC: D | RNVC: 9
6926191: RNCC: D | RNVC: 9

25 Mar 1999

3040-01-464-0940
Master Rebuild Kit

014640940
90-015-3021: RNCC: 3 | RNVC: 2

15 Apr 1999

3040-01-464-9018
Shouldered Shaft

014649018
765340: RNCC: 3 | RNVC: 2

13 May 1999

3040-01-465-1743
Manual Control Lever

014651743
530257: RNCC: 3 | RNVC: 2
530257: RNCC: 5 | RNVC: 9
530257: RNCC: 5 | RNVC: 9

25 May 1999

3040-01-465-1215
Straight Shaft

014651215
6409001: RNCC: 3 | RNVC: 2
528-6409001 53: RNCC: 5 | RNVC: 2
528-6409001 FIN: RNCC: C | RNVC: 1

21 May 1999

3040-01-464-4685
Shouldered Shaft

014644685
53758: RNCC: 3 | RNVC: 2
721-30-B5-G2 OUTPUT SHAFT ASSY: RNCC: 5 | RNVC: 9

30 Apr 1999

3040-01-466-3566
Shouldered Shaft Assembly

014663566
909860-1: RNCC: 3 | RNVC: 2
9168387: RNCC: 7 | RNVC: 9
9168387: RNCC: C | RNVC: 1

15 Jul 1999

3040-01-474-2091
Shouldered Shaft

014742091
118-5837: RNCC: 3 | RNVC: 2

27 Apr 2000

3040-01-474-6404
Linear Actuating Cylinder Assembly

014746404
AG201170E: RNCC: 3 | RNVC: 2
AG201170E0: RNCC: 5 | RNVC: 9

9 May 2000

3040-01-475-2284
Multiple Gears Gearshaft

014752284
2028764: RNCC: 3 | RNVC: 9
AT154653: RNCC: 5 | RNVC: 9

25 May 2000

Load More Results