What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 113 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 113 of 300

3040-01-597-6016
Transmission Fluid Cooler

015976016
1436.010.0000: RNCC: 3 | RNVC: 2

16 Jun 2011

3040-01-598-4547
Straight Shaft

015984547
12285123: RNCC: 3 | RNVC: 2

3 Aug 2011

3040-01-600-3338
Shaft Retaining Plate

016003338
0225-07078: RNCC: 3 | RNVC: 2
27KP936: RNCC: 5 | RNVC: 2
27KP936: RNCC: 5 | RNVC: 9

23 Nov 2011

3040-01-601-0863
Shouldered Shaft

016010863
29542205: RNCC: 3 | RNVC: 2
16KP970: RNCC: 5 | RNVC: 2
16KP970: RNCC: 5 | RNVC: 9

5 Jan 2012

3040-01-601-2341
Main Bellcrank Nrp

016012341
5129T54G01: RNCC: 3 | RNVC: 2

13 Jan 2012

3040-01-601-1021
Mechanical Drive Housing

016011021
6456K18: RNCC: 3 | RNVC: 2

5 Jan 2012

3040-01-603-1324
Rigid Connecting Link

016031324
A18-64951-000: RNCC: 3 | RNVC: 2

23 Feb 2012

3040-01-603-7181
Nonaircraft Mechanical Actuator

016037181
2000-40089-33: RNCC: 3 | RNVC: 2

12 Mar 2012

3040-01-604-2799
Shouldered Shaft

016042799
41112-ZY3-611: RNCC: 3 | RNVC: 9

2 Apr 2012

3040-01-605-6507
Mechanical Drive Housing

016056507
8M0056631: RNCC: 3 | RNVC: 2
880687T01: RNCC: 5 | RNVC: 9

23 Apr 2012

3040-01-605-9798
Pivot Shaft Assembly

016059798
53377: RNCC: 3 | RNVC: 2
26KP447: RNCC: 5 | RNVC: 2
26KP447: RNCC: 5 | RNVC: 9

2 May 2012

3040-01-606-7546
Flexible Casing End Fitting

016067546
M3807: RNCC: 3 | RNVC: 2
19684PC5: RNCC: 5 | RNVC: 2

23 May 2012

3040-01-607-1041
Manual Control Lever Assembly

016071041
220142: RNCC: 3 | RNVC: 2

31 May 2012

3040-01-607-1090
Piston Ring

016071090
R8505644-SP102: RNCC: 3 | RNVC: 2
R8505644-SP102: RNCC: 5 | RNVC: 2

31 May 2012

3040-01-607-7534
Shaft Collar

016077534
7-511315439-001: RNCC: 3 | RNVC: 2

13 Jun 2012

3040-01-545-0196
Ball Joint

015450196
9612-204-009: RNCC: 3 | RNVC: 2

30 Oct 2006

3040-01-543-6749
Shouldered Shaft

015436749
8978-036-00Y: RNCC: 3 | RNVC: 2

19 Sep 2006

3040-01-545-1412
Shouldered Shaft

015451412
29542515: RNCC: 3 | RNVC: 2
29542515: RNCC: 5 | RNVC: 2
17KP483: RNCC: 5 | RNVC: 2
17KP483: RNCC: 5 | RNVC: 9

2 Nov 2006

3040-01-546-1727
Shaft Collar

015461727
104843: RNCC: 3 | RNVC: 2

7 Dec 2006

3040-01-546-2017
Linear Actuating Cylinder Cap

015462017
332/G1002: RNCC: 3 | RNVC: 2
594/14268: RNCC: 5 | RNVC: 9

8 Dec 2006

3040-01-546-4363
Linear Actuating Cylinder Piston Rod

015464363
590/40665: RNCC: 3 | RNVC: 2

15 Dec 2006

3040-01-527-9804
Shouldered Shaft

015279804
9-24871-1: RNCC: 3 | RNVC: 2

28 Feb 2005

3040-01-528-5864
Multiple Gears Gearshaft

015285864
5001T56P05: RNCC: 3 | RNVC: 2
5001T56P04: RNCC: 5 | RNVC: 9
5001T56: RNCC: D | RNVC: 9

18 Mar 2005

3040-01-529-3341
Piston Ring Set

015293341
960145-94: RNCC: 3 | RNVC: 2

13 Apr 2005

3040-01-529-6327
Flexible Shaft Assembly

015296327
8229-103: RNCC: 3 | RNVC: 2
13213264: RNCC: 7 | RNVC: 2

25 Apr 2005

3040-01-530-1214
Linear Actuating Cylinder Assembly

015301214
HC5318: RNCC: 3 | RNVC: 2

16 May 2005

3040-01-531-0823
Counterbalance Weight

015310823
9127M56P02: RNCC: 3 | RNVC: 2

21 Jun 2005

3040-01-531-0887
Rigid Connecting Link

015310887
IM-FFG-D-004: RNCC: 3 | RNVC: 2

22 Jun 2005

3040-01-531-6706
Rigid Connecting Link

015316706
113315-1: RNCC: 3 | RNVC: 2

19 Jul 2005

3040-01-531-9923
Shouldered Shaft

015319923
21141-1000-1: RNCC: 3 | RNVC: 2
21141 FIND 8: RNCC: 5 | RNVC: 1

25 Jul 2005

3040-01-534-6225
Shouldered Shaft

015346225
100-31-SP211: RNCC: 3 | RNVC: 2
1003DH-S0801211 ITEM NO. 3: RNCC: 5 | RNVC: 2

27 Oct 2005

3040-01-534-9752
Shouldered Shaft

015349752
204-7519: RNCC: 3 | RNVC: 2

9 Nov 2005

3040-01-534-9761
Linear Actuating Cylinder Assembly Parts Kit

015349761
HS5176: RNCC: 3 | RNVC: 9

9 Nov 2005

3040-01-535-3679
Spur Gearshaft

015353679
915118: RNCC: 3 | RNVC: 2
E-3548 ITEM NO. 102 (28 TOOTH): RNCC: 5 | RNVC: 2

28 Nov 2005

3040-01-535-9490
Flexible Drive Shaft

015359490
593-6960591 PC 1: RNCC: 3 | RNVC: 2
M696059101: RNCC: 5 | RNVC: 2
M646059101: RNCC: 5 | RNVC: 9

15 Dec 2005

3040-01-538-4743
Rigid Connecting Link

015384743
1629322: RNCC: 3 | RNVC: 2
1622759: RNCC: 5 | RNVC: 9
137441: RNCC: 5 | RNVC: 9
132895: RNCC: D | RNVC: 9

23 Mar 2006

3040-01-539-2024
Straight Shaft

015392024
0311-961281: RNCC: 3 | RNVC: 2

13 Apr 2006

3040-01-539-6291
Spur Gearshaft

015396291
167-7066800-49: RNCC: 3 | RNVC: 2
H547-1803-49: RNCC: 5 | RNVC: 2

27 Apr 2006

3040-01-540-3505
Remote Control Lever

015403505
0436902: RNCC: 3 | RNVC: 9
0436902: RNCC: 5 | RNVC: 2

16 May 2006

3040-01-540-8184
Rigid Connecting Link

015408184
1071018: RNCC: 3 | RNVC: 2

5 Jun 2006

3040-01-541-4297
Stub Shaft Toe Guard

015414297
005399: RNCC: 3 | RNVC: 2

27 Jun 2006

3040-01-541-6777
Straight Shaft

015416777
006-2005035-07-508: RNCC: 3 | RNVC: 2
999-246B-0-05 REV E ITEM 6: RNCC: 5 | RNVC: 2

6 Jul 2006

3040-01-541-8769
Ball Joint

015418769
006737: RNCC: 3 | RNVC: 2

14 Jul 2006

3040-01-542-8078
Piston Ring

015428078
736C-10009: RNCC: 3 | RNVC: 2
P-1016-04: RNCC: 5 | RNVC: 9

18 Aug 2006

3040-01-544-5192
Rigid Connecting Link

015445192
2266577: RNCC: 3 | RNVC: 2

16 Oct 2006

3040-01-547-2995
Shaft Retaining Plate

015472995
9238551305: RNCC: 3 | RNVC: 2
923855.1305: RNCC: 5 | RNVC: 2

17 Jan 2007

3040-01-547-5313
Shaft Retaining Plate

015475313
297KB117BP2: RNCC: 3 | RNVC: 2
10026208: RNCC: 5 | RNVC: 2

24 Jan 2007

3040-01-547-7986
Aircraf Brake Shaft

015477986
42555-211: RNCC: 3 | RNVC: 2

1 Feb 2007

3040-01-548-0981
Rigid Connecting Link

015480981
12480850: RNCC: 3 | RNVC: 2
6016446: RNCC: 5 | RNVC: 9

8 Feb 2007

3040-01-548-3713
Linear Actuating Cylinder Assembly

015483713
113133A2: RNCC: 3 | RNVC: 2

21 Feb 2007

3040-01-548-6147
Flexible Shafting

015486147
57353-42: RNCC: 3 | RNVC: 2

28 Feb 2007

3040-01-548-7219
Linear Actuating Cylinder Piston

015487219
311109A1: RNCC: 3 | RNVC: 2
3832AS230-12: RNCC: 5 | RNVC: 2

2 Mar 2007

3040-01-548-7421
Linear Actuating Cylinder Cap

015487421
1542914C1: RNCC: 3 | RNVC: 2

2 Mar 2007

3040-01-549-3596
Linear Actuating Cylinder Assembly

015493596
305499A1: RNCC: 3 | RNVC: 2

19 Mar 2007

3040-01-550-0397
Port And Poppet Assembly

015500397
L074350002: RNCC: 3 | RNVC: 2
BA005X364 IT 9: RNCC: 5 | RNVC: 2

5 Apr 2007

3040-01-549-0898
Spur Gearshaft

015490898
9-62459: RNCC: 3 | RNVC: 2

12 Mar 2007

3040-01-550-6259
Shouldered Shaft

015506259
FD0013T: RNCC: 3 | RNVC: 2
F8199-000152: RNCC: 6 | RNVC: 9

24 Apr 2007

3040-01-549-5262
Shaft Collar

015495262
39041-1: RNCC: 3 | RNVC: 2

22 Mar 2007

3040-01-552-7792
Rotating Shaft Eye Bracket

015527792
R0060601: RNCC: 3 | RNVC: 2
R0060601: RNCC: 5 | RNVC: 2

25 Jun 2007

3040-01-553-6874
Rigid Connecting Link

015536874
6702904: RNCC: 3 | RNVC: 2
6702904: RNCC: 5 | RNVC: 2

23 Jul 2007

3040-01-553-9831
Housing Adapter

015539831
63439340: RNCC: 3 | RNVC: 2
63439340: RNCC: 5 | RNVC: 9

27 Jul 2007

3040-01-554-0328
Rigid Connecting Link

015540328
47071712: RNCC: 3 | RNVC: 2
47071712: RNCC: 5 | RNVC: 9

27 Jul 2007

3040-01-555-0893
Control Cam

015550893
61A-SM2557-001: RNCC: 3 | RNVC: 2
61A-SM2557-001: RNCC: 5 | RNVC: 2

29 Aug 2007

3040-01-555-6746
Shouldered Shaft Assembly

015556746
191919: RNCC: 3 | RNVC: 2
20864041: RNCC: 5 | RNVC: 2
20864007 FN8: RNCC: 5 | RNVC: 2
20864007: RNCC: D | RNVC: 9

11 Sep 2007

3040-01-556-2828
Worm Shaft

015562828
13017160: RNCC: 3 | RNVC: 2

29 Sep 2007

3040-01-556-6976
Rigid Connecting Link

015566976
74A672404-1003: RNCC: 3 | RNVC: 2

4 Oct 2007

3040-01-557-4320
Mechanical Drive Housing

015574320
3211885: RNCC: 3 | RNVC: 2
3211885: RNCC: 5 | RNVC: 9

23 Oct 2007

3040-01-557-6133
Mechanical Steering Actuator

015576133
R0065939: RNCC: 3 | RNVC: 2
R0065939: RNCC: 5 | RNVC: 2
R0065939-0102: RNCC: D | RNVC: 9

25 Oct 2007

3040-01-558-5516
Belt-Chain Tension Adjusting Device

015585516
3976834: RNCC: 3 | RNVC: 2
02/912216: RNCC: 5 | RNVC: 2
3976834: RNCC: 5 | RNVC: 2
3976834: RNCC: 5 | RNVC: 2
A045Z985: RNCC: 5 | RNVC: 2
3976834: RNCC: 5 | RNVC: 9

14 Nov 2007

3040-01-558-6886
Straight Shaft Assembly

015586886
201198: RNCC: 3 | RNVC: 2

19 Nov 2007

3040-01-558-6811
Counterbalance Weight

015586811
2116M38P01: RNCC: 3 | RNVC: 2

19 Nov 2007

3040-01-558-9856
Rotating Shaft Eye Bracket

015589856
3115496: RNCC: 3 | RNVC: 2
3115496: RNCC: 5 | RNVC: 9

3 Dec 2007

3040-01-558-7625
Nonaircraft Mechanical Actuator

015587625
010-9238: RNCC: 3 | RNVC: 2

21 Nov 2007

3040-01-559-8282
Fix Insert

015598282
802011213908-1: RNCC: 3 | RNVC: 2

8 Jan 2008

3040-01-560-1591
Shouldered Shaft

015601591
5614/2-151-000: RNCC: 3 | RNVC: 2
0509 PL FIND NO 36: RNCC: 5 | RNVC: 2

17 Jan 2008

3040-01-560-1594
Shouldered Shaft

015601594
5407-188-000: RNCC: 3 | RNVC: 2
5400 PL FIND NO. 5: RNCC: 5 | RNVC: 2

17 Jan 2008

3040-01-560-9412
Rigid Connecting Link

015609412
A2785-16: RNCC: 3 | RNVC: 2
A2785-16: RNCC: 5 | RNVC: 2
A2785-14: RNCC: 5 | RNVC: 9

20 Feb 2008

3040-01-561-4102
Spur Gearshaft

015614102
12323-188-000: RNCC: 3 | RNVC: 2
12220PL FN 7: RNCC: 5 | RNVC: 2

5 Mar 2008

3040-01-561-6449
Shouldered Shaft

015616449
00-916340: RNCC: 3 | RNVC: 2
00-916340: RNCC: 5 | RNVC: 2

13 Mar 2008

3040-01-562-0611
Linear Actuating Cylinder Assembly Parts Kit

015620611
3J14691: RNCC: 3 | RNVC: 2

27 Mar 2008

3040-01-562-0867
Linear Actuating Cylinder Assembly Parts Kit

015620867
3J15593: RNCC: 3 | RNVC: 2

28 Mar 2008

3040-01-563-8260
Shaft Collar

015638260
8215130: RNCC: 3 | RNVC: 2
8215130: RNCC: 5 | RNVC: 2

23 May 2008

3040-01-563-8654
Rigid Connecting Link

015638654
4286890: RNCC: 3 | RNVC: 2
4286890: RNCC: 5 | RNVC: 2

27 May 2008

3040-01-564-0267
Rigid Connecting Link

015640267
B-090106X16-HAST: RNCC: 3 | RNVC: 2
803-6397269 PC 13 MOD: RNCC: 5 | RNVC: 2

3 Jun 2008

3040-01-564-0335
Linear Actuating Cylinder

015640335
3683186C92: RNCC: 3 | RNVC: 2
3683186C92: RNCC: 5 | RNVC: 2
3683186C91L: RNCC: 5 | RNVC: 9
3683186C91: RNCC: 5 | RNVC: 9

3 Jun 2008

3040-01-564-0940
Rigid Connecting Link

015640940
803-6397268 PC 197: RNCC: 3 | RNVC: 2

4 Jun 2008

3040-01-564-2533
Rigid Connecting Link

015642533
B-090106X10-CR: RNCC: 3 | RNVC: 2
B-090109X10-CR: RNCC: 3 | RNVC: 2

10 Jun 2008

3040-01-564-8550
Rigid Connecting Link

015648550
55-15-0008: RNCC: 3 | RNVC: 2
55-15-0008: RNCC: 3 | RNVC: 9

30 Jun 2008

3040-01-565-0918
Brake Disc

015650918
13436-061: RNCC: 3 | RNVC: 2
1-056-762-08-001: RNCC: 5 | RNVC: 2

11 Jul 2008

3040-01-565-0761
Controllable Swashplate

015650761
10KP874: RNCC: 3 | RNVC: 2
4997172-001: RNCC: 3 | RNVC: 2
10KP874: RNCC: 5 | RNVC: 9
4997172-001: RNCC: D | RNVC: 9

10 Jul 2008

3040-01-565-0928
Disc Brass Station

015650928
8-003-513-02: RNCC: 3 | RNVC: 2
8-078-906-17 TBL 4 ITEM M4: RNCC: 5 | RNVC: 9

11 Jul 2008

3040-01-565-8358
Straight Shaft Assembly

015658358
6025464: RNCC: 3 | RNVC: 2

8 Aug 2008

3040-01-566-1724
Shouldered Shaft

015661724
3305AS1548-1: RNCC: 3 | RNVC: 2
3305AS1548: RNCC: 5 | RNVC: 2

22 Aug 2008

3040-01-566-1407
Control Cam

015661407
LCS2-120-53S: RNCC: 3 | RNVC: 2
805-1624129 PC 45 MOD CRES: RNCC: 5 | RNVC: 2
120-53S: RNCC: 5 | RNVC: 9

21 Aug 2008

3040-01-566-4544
Bevel Gear And Shaft Assembly

015664544
T294888: RNCC: 3 | RNVC: 2
T173860: RNCC: 5 | RNVC: 9

2 Sep 2008

3040-01-566-4422
Straight Shaft

015664422
3305AS1550-1: RNCC: 3 | RNVC: 2

2 Sep 2008

3040-01-565-6493
Hydraulic Accumulator Cylinder

015656493
GG731631A: RNCC: 3 | RNVC: 2

1 Aug 2008

3040-01-566-9533
Nonrotating Shaft Eye Bracket

015669533
4294435: RNCC: 3 | RNVC: 2
4294435: RNCC: 5 | RNVC: 2

15 Sep 2008

3040-01-567-0646
Shoe Type Brake

015670646
02-550-114: RNCC: 3 | RNVC: 2
MN-1342: RNCC: 5 | RNVC: 9

17 Sep 2008

3040-01-566-9684
Rigid Connecting Link

015669684
4299040: RNCC: 3 | RNVC: 2
4299040: RNCC: 5 | RNVC: 2

15 Sep 2008

3040-01-567-1314
Rigid Connecting Link

015671314
8551-A-12: RNCC: 3 | RNVC: 2
3679947C92: RNCC: 5 | RNVC: 2

18 Sep 2008

3040-01-567-1263
Cylinder Support

015671263
3683191C91: RNCC: 3 | RNVC: 2
3683191C91L: RNCC: 5 | RNVC: 9

18 Sep 2008

3040-01-568-5112
Rigid Connecting Link

015685112
S-247.25: RNCC: 3 | RNVC: 2

3 Nov 2008

3040-01-569-0748
Shouldered Shaft

015690748
1402-21041-34: RNCC: 3 | RNVC: 2

19 Nov 2008

3040-01-569-0824
Shouldered Shaft

015690824
1403-21045-34: RNCC: 3 | RNVC: 2

19 Nov 2008

3040-01-569-3627
Shouldered Shaft

015693627
13017545: RNCC: 3 | RNVC: 2

27 Nov 2008

3040-01-569-9461
Straight Shaft

015699461
AT-LG-500-350: RNCC: 3 | RNVC: 2

11 Dec 2008

3040-01-569-9464
Mechanical Drive Housing

015699464
1802001: RNCC: 3 | RNVC: 2

11 Dec 2008

3040-01-569-6594
Rigid Connecting Link

015696594
FA0643: RNCC: 3 | RNVC: 2

5 Dec 2008

3040-01-569-9468
Straight Shaft

015699468
AT-LG-500-360: RNCC: 3 | RNVC: 2

11 Dec 2008

3040-01-570-0308
Mechanical Drive Housing

015700308
0109-06027-33: RNCC: 3 | RNVC: 2

15 Dec 2008

3040-01-570-2464
Body Hub

015702464
0100-06084-40: RNCC: 3 | RNVC: 2

18 Dec 2008

3040-01-570-4419
Shaft Collar

015704419
57145K75: RNCC: 3 | RNVC: 2

31 Dec 2008

3040-01-570-7241
Body Hub

015707241
4G10638H01: RNCC: 3 | RNVC: 2
4G10635 ITEM 006: RNCC: 5 | RNVC: 1
PL4G10635 ITEM 006: RNCC: 5 | RNVC: 1

12 Jan 2009

3040-01-570-6630
Mechanically Actuated Spindle

015706630
A-3213-K-2117: RNCC: 3 | RNVC: 2

8 Jan 2009

3040-01-571-1310
Straight Shaft

015711310
3740AS2013-1: RNCC: 3 | RNVC: 2

26 Jan 2009

3040-01-572-6740
Shouldered Shaft

015726740
3023-345: RNCC: 3 | RNVC: 2

19 Mar 2009

3040-01-573-4166
Bevel Gear And Shaft Assembly

015734166
41140-ZY6-000: RNCC: 3 | RNVC: 9

22 Apr 2009

3040-01-573-6602
Rotary Actuating Cylinder Assembly

015736602
12424660: RNCC: 3 | RNVC: 2

1 May 2009

3040-01-573-9902
Linear Actuating Cylinder Assembly Parts Kit

015739902
BB278667A50: RNCC: 3 | RNVC: 2
BB278667AA / BB278667A50: RNCC: 5 | RNVC: 2

12 May 2009

3040-01-575-3115
Mechanical Drive Housing

015753115
5405/2-145-000: RNCC: 3 | RNVC: 2
0511PL FIND NO5/0511-15-S731-100: RNCC: 5 | RNVC: 2
5400 PL PART NO. 5400-3-999-000: RNCC: 5 | RNVC: 2
5400 REV C AND PL 5400 REV B: RNCC: 5 | RNVC: 2
5400-3-999-000: RNCC: 5 | RNVC: 9

26 Jun 2009

3040-01-575-4131
Hub Clamp

015754131
332/C0788: RNCC: 3 | RNVC: 2

1 Jul 2009

3040-01-575-7067
Rotary Actuating Cylinder Assembly

015757067
ABP N83 302051: RNCC: 3 | RNVC: 2
RDH RD5 5263 0: RNCC: 5 | RNVC: 9

13 Jul 2009

3040-01-575-7731
Rigid Connecting Link

015757731
14-17080-001: RNCC: 3 | RNVC: 2
14-17080: RNCC: D | RNVC: 9

14 Jul 2009

3040-01-576-9466
Nonaircraft Mechanical Actuator

015769466
ABP N83 328355: RNCC: 3 | RNVC: 2
RDH RD3 6038 0: RNCC: 5 | RNVC: 9

20 Aug 2009

3040-01-578-9635
Nonaircraft Mechanical Actuator

015789635
6442704-200M1: RNCC: 3 | RNVC: 2
6442704-200M1: RNCC: 3 | RNVC: 9
6442704-200M1: RNCC: 5 | RNVC: 2

27 Oct 2009

3040-01-577-9849
Shaft Idler

015779849
R0097743: RNCC: 3 | RNVC: 2
R0097743: RNCC: 5 | RNVC: 2
R0097743-0102: RNCC: D | RNVC: 9

23 Sep 2009

3040-01-579-9487
Nonaircraft Mechanical Actuator

015799487
ABP N83 301429: RNCC: 3 | RNVC: 2
RDH RD5 8791 0: RNCC: 5 | RNVC: 9

30 Nov 2009

3040-01-580-5057
Shouldered Shaft

015805057
6445054-01M1: RNCC: 3 | RNVC: 2
6445054-01M1: RNCC: 3 | RNVC: 2
6445054-01M1: RNCC: 3 | RNVC: 2
6445054-01M1: RNCC: 3 | RNVC: 9
6445054-01M1: RNCC: 5 | RNVC: 2

16 Dec 2009

3040-01-582-4637
Bell Crank

015824637
0312107148-00: RNCC: 3 | RNVC: 2
26KP363: RNCC: 7 | RNVC: 2
0312107048-00: RNCC: D | RNVC: 9
3844278: RNCC: D | RNVC: 9

23 Feb 2010

3040-01-582-3524
Nonaircraft Mechanical Actuator

015823524
9585: RNCC: 3 | RNVC: 2

17 Feb 2010

3040-01-582-5726
Housing Adapter

015825726
MT93-1363: RNCC: 3 | RNVC: 2
22KP282: RNCC: 7 | RNVC: 2

26 Feb 2010

3040-01-583-8843
Planetary Gears Carrier

015838843
3792579C1: RNCC: 3 | RNVC: 2
69084-002: RNCC: C | RNVC: 1

9 Apr 2010

3040-01-584-5209
Linear Actuating Cylinder

015845209
0974901G: RNCC: 3 | RNVC: 2
0974901: RNCC: 5 | RNVC: 9

28 Apr 2010

3040-01-584-6948
Straight Shaft

015846948
449-040-113-101: RNCC: 3 | RNVC: 2

4 May 2010

3040-01-585-4094
Helical Gearshaft

015854094
R504843: RNCC: 3 | RNVC: 2

25 May 2010

3040-01-587-1030
Nonaircraft Mechanical Actuator

015871030
KL16KNG21T10V1-11: RNCC: 3 | RNVC: 2

23 Jul 2010

3040-01-587-6995
Control Cam

015876995
707212-6: RNCC: 3 | RNVC: 2
707212-6: RNCC: 3 | RNVC: 9

17 Aug 2010

3040-01-588-5012
Manual Control Lever

015885012
01317800: RNCC: 3 | RNVC: 2
H201287: RNCC: 7 | RNVC: 2

22 Sep 2010

3040-01-589-5264
Inertia Damper

015895264
12505368-005: RNCC: 3 | RNVC: 2
12505368: RNCC: D | RNVC: 9

29 Oct 2010

3040-01-592-4718
Mechanically Actuated Spindle

015924718
3922AS141-1: RNCC: 3 | RNVC: 2

8 Mar 2011

3040-01-593-2365
Worm Shaft

015932365
6037940-1: RNCC: 3 | RNVC: 2

5 Apr 2011

3040-01-593-7423
Straight Shaft Assembly

015937423
7548595-552: RNCC: 3 | RNVC: 2

14 Apr 2011

3040-01-594-7694
Straight Shaft

015947694
307-8322: RNCC: 3 | RNVC: 2
CV182518: RNCC: 5 | RNVC: 2
307-8322: RNCC: 5 | RNVC: 2
23KP855: RNCC: 5 | RNVC: 2
23KP855: RNCC: 5 | RNVC: 9

25 Apr 2011

3040-01-595-4759
Pivot Shaft Assembly

015954759
9720-163: RNCC: 3 | RNVC: 2

28 Apr 2011

3040-01-598-7831
Rigid Connecting Link

015987831
10014712: RNCC: 3 | RNVC: 2

26 Aug 2011

3040-01-598-8470
Ball Joint

015988470
R0071167: RNCC: 3 | RNVC: 2
R0071167: RNCC: 5 | RNVC: 2
R0071167-0301: RNCC: D | RNVC: 9

30 Aug 2011

3040-01-600-7029
Linear Actuating Cylinder Assembly

016007029
3776821132: RNCC: 3 | RNVC: 2

15 Dec 2011

3040-01-601-0947
Shouldered Shaft

016010947
52720822: RNCC: 3 | RNVC: 2
24KP271: RNCC: 5 | RNVC: 2
24KP271: RNCC: 5 | RNVC: 9

5 Jan 2012

3040-01-602-0263
Shouldered Shaft

016020263
014-1410002-554: RNCC: 3 | RNVC: 2
999-1107-A-41 ITEM- 14: RNCC: 5 | RNVC: 2
014-1410002-252: RNCC: 5 | RNVC: 9

26 Jan 2012

3040-01-602-7175
Compression Piston

016027175
PH-C-14456: RNCC: 3 | RNVC: 2
WH-300001 REV.000 NO.068: RNCC: 5 | RNVC: 2

3 Feb 2012

3040-01-603-3426
Rigid Connecting Link

016033426
315A2504-8: RNCC: 3 | RNVC: 2

29 Feb 2012

3040-01-604-2820
Rigid Connecting Link

016042820
10000365: RNCC: 3 | RNVC: 2

2 Apr 2012

3040-01-605-0898
Remote Control Lever

016050898
335/05063: RNCC: 3 | RNVC: 2

16 Apr 2012

3040-01-605-3634
Threaded Shaft

016053634
901-215-063-121: RNCC: 1 | RNVC: 2
901-215-063-121: RNCC: 3 | RNVC: 2

19 Apr 2012

3040-01-605-3973
Shaft Collar

016053973
HL73DY-5: RNCC: 3 | RNVC: 2
HL73DY-5: RNCC: 5 | RNVC: 9

19 Apr 2012

3040-01-605-7967
Shouldered Shaft

016057967
R8506603-SP102: RNCC: 3 | RNVC: 2
R8506603-SP102: RNCC: 5 | RNVC: 2

25 Apr 2012

3040-01-605-8117
Straight Shaft

016058117
14003020: RNCC: 3 | RNVC: 2
14003020: RNCC: 3 | RNVC: 9
14003016 ITEM NO. 4: RNCC: D | RNVC: 9

25 Apr 2012

3040-01-606-0155
Shouldered Shaft

016060155
25KP189: RNCC: 3 | RNVC: 2
25KP189: RNCC: 3 | RNVC: 9

3 May 2012

3040-01-606-8056
Push-Pull Control Assembly

016068056
897977A16: RNCC: 3 | RNVC: 2
850716A16: RNCC: 5 | RNVC: 9

24 May 2012

3040-01-607-0590
Shoe Assembly Cw

016070590
20-8593-2: RNCC: 3 | RNVC: 2
478593-2: RNCC: 5 | RNVC: 2

30 May 2012

3040-01-607-3243
Flexible Shaft Assembly

016073243
2ABS12005: RNCC: 3 | RNVC: 2
2ABS12005: RNCC: 3 | RNVC: 9

8 Jun 2012

3040-01-607-1104
Piston Ring

016071104
R8506378-SP300: RNCC: 3 | RNVC: 2
R8506378-SP300: RNCC: 5 | RNVC: 2

31 May 2012

3040-01-562-8425
Pivot Shaft Assembly

015628425
3675767: RNCC: 3 | RNVC: 2
3675767: RNCC: 5 | RNVC: 9

23 Apr 2008

3040-01-563-4021
Shouldered Shaft Assembly

015634021
13017380: RNCC: 3 | RNVC: 2

9 May 2008

3040-01-563-6151
Vehicular Components Bracket

015636151
12621495: RNCC: 3 | RNVC: 2
LS1048433: RNCC: 5 | RNVC: 2

15 May 2008

3040-01-570-1673
Straight Shaft Assembly

015701673
3392AS840: RNCC: 3 | RNVC: 2

17 Dec 2008

3040-01-574-5555
Linear Actuating Cylinder Assembly

015745555
2087641: RNCC: 3 | RNVC: 2
2087641: RNCC: 5 | RNVC: 2

1 Jun 2009

3040-01-578-5214
Straight Shaft Assembly

015785214
8E3507: RNCC: 3 | RNVC: 2

8 Oct 2009

3040-01-581-0074
Piston Ring

015810074
102355A: RNCC: 3 | RNVC: 2
P05235: RNCC: 5 | RNVC: 2
E108130 FIND 34: RNCC: 5 | RNVC: 2

4 Jan 2010

3040-01-528-1642
Nonaircraft Mechanical Actuator

015281642
APC30303: RNCC: 3 | RNVC: 2
APC30303: RNCC: 5 | RNVC: 2

4 Mar 2005

3040-01-529-2873
Manual Control Lever Assembly

015292873
37-00706D-008: RNCC: 3 | RNVC: 2
37D00706-008: RNCC: 5 | RNVC: 9

12 Apr 2005

3040-01-529-3228
Spur Gearshaft

015293228
201.0817: RNCC: 3 | RNVC: 2
PL MODEL 201-S ITEM 17: RNCC: 5 | RNVC: 2
201.0811: RNCC: 5 | RNVC: 9

13 Apr 2005

3040-01-530-6854
Shaft Retaining Plate

015306854
7550138-29: RNCC: 3 | RNVC: 2
7550079-37: RNCC: 5 | RNVC: 1
G545-4102-37: RNCC: 5 | RNVC: 1
G545-4105-29: RNCC: 5 | RNVC: 2
7550138-29: RNCC: 5 | RNVC: 2

8 Jun 2005

3040-01-530-9404
Linear Actuating Cylinder Assembly

015309404
D-WK-861-8 REV C: RNCC: 3 | RNVC: 2
D-WK-861-8 PC6: RNCC: 5 | RNVC: 9
D-WK-861-20: RNCC: 5 | RNVC: 9

17 Jun 2005

3040-01-531-4383
Rigid Connecting Link

015314383
22D0043-1: RNCC: 3 | RNVC: 2
22D0043: RNCC: D | RNVC: 9

8 Jul 2005

3040-01-531-2668
Body Hub

015312668
29505977: RNCC: 3 | RNVC: 2

30 Jun 2005

3040-01-532-2817
Rigid Connecting Link

015322817
901-031-676-129: RNCC: 3 | RNVC: 2

4 Aug 2005

3040-01-532-2949
Rigid Connecting Link

015322949
901-301-022-121: RNCC: 3 | RNVC: 2

4 Aug 2005

3040-01-532-4353
Control Cam

015324353
313-0031: RNCC: 3 | RNVC: 2
6515NAB-500 ITEM 14: RNCC: 5 | RNVC: 2

9 Aug 2005

3040-01-534-4579
Rigid Connecting Link

015344579
113435-1: RNCC: 3 | RNVC: 2
113435: RNCC: D | RNVC: 9

24 Oct 2005

3040-01-535-4182
Rigid Connecting Link

015354182
70-3028: RNCC: 3 | RNVC: 2
70-2030 ITEM 10: RNCC: 5 | RNVC: 2
M2065 ITEM 25: RNCC: 5 | RNVC: 2
70-2030M ITEM 10: RNCC: 5 | RNVC: 2

29 Nov 2005

3040-01-534-7401
Ball Joint

015347401
ES250: RNCC: 3 | RNVC: 2

1 Nov 2005

3040-01-536-5571
Rigid Connecting Link

015365571
30-60030-00: RNCC: 3 | RNVC: 2

6 Jan 2006

3040-01-538-2745
Straight Shaft

015382745
GXHB-99-16-045-0: RNCC: 3 | RNVC: 2
GXHB-99-16-050-0: RNCC: 5 | RNVC: 9

16 Mar 2006

3040-01-538-8539
Shouldered Shaft

015388539
F-WK-871-4 PC 120: RNCC: 3 | RNVC: 2

3 Apr 2006

3040-01-539-2315
Manual Control Lever

015392315
12477942: RNCC: 3 | RNVC: 2

14 Apr 2006

3040-01-539-6286
Spur Gearshaft

015396286
167-6404600 FIND 74: RNCC: 3 | RNVC: 2

27 Apr 2006

3040-01-539-5319
Remote Control Lever

015395319
167-6404600 FIND 32: RNCC: 3 | RNVC: 2

25 Apr 2006

3040-01-540-3498
Shouldered Shaft Assembly

015403498
5009550: RNCC: 3 | RNVC: 2
5001766: RNCC: 3 | RNVC: 9
5001766: RNCC: 5 | RNVC: 9

16 May 2006

3040-01-541-1479
Gearbox Parts Kit

015411479
5006373: RNCC: 3 | RNVC: 2
5006373: RNCC: 5 | RNVC: 9

16 Jun 2006

3040-01-541-1797
Straight Shaft

015411797
GTHB-99-17-056-0: RNCC: 3 | RNVC: 2

19 Jun 2006

3040-01-541-4822
Push-Pull Control Assembly

015414822
005675: RNCC: 3 | RNVC: 2

28 Jun 2006

3040-01-541-5419
Rigid Connecting Link

015415419
29908-01K: RNCC: 3 | RNVC: 2
205101 ITEM 11: RNCC: 5 | RNVC: 2

29 Jun 2006

3040-01-542-4036
Rigid Connecting Link

015424036
12501509: RNCC: 3 | RNVC: 2

3 Aug 2006

3040-01-543-3118
Straight Shaft

015433118
458/20644: RNCC: 3 | RNVC: 2
458/20644: RNCC: 5 | RNVC: 2
458/20644: RNCC: 5 | RNVC: 2
458/20644: RNCC: 5 | RNVC: 2
458/20644: RNCC: 5 | RNVC: 2

8 Sep 2006

3040-01-543-4135
Rigid Connecting Link

015434135
29025: RNCC: 3 | RNVC: 9
29025: RNCC: 5 | RNVC: 2
29025: RNCC: 5 | RNVC: 9

12 Sep 2006

3040-01-544-6188
Shouldered Shaft

015446188
9U6896: RNCC: 3 | RNVC: 2
28KP862: RNCC: 5 | RNVC: 2
28KP862: RNCC: 5 | RNVC: 9

18 Oct 2006

3040-01-545-2348
Housing Adapter

015452348
70213-01007-102: RNCC: 3 | RNVC: 2

6 Nov 2006

3040-01-546-2576
Ball Joint

015462576
87421807: RNCC: 3 | RNVC: 2

12 Dec 2006

3040-01-548-0691
Rigid Connecting Link

015480691
101703-1: RNCC: 3 | RNVC: 2

8 Feb 2007

3040-01-546-2389
Mechanical Drive Housing

015462389
A-3201-G-7573: RNCC: 3 | RNVC: 2
A-3201-G-7573: RNCC: 5 | RNVC: 9

11 Dec 2006

3040-01-548-5533
Mechanical Drive Housing

015485533
25502829: RNCC: 3 | RNVC: 2
406KB156: RNCC: 5 | RNVC: 9

27 Feb 2007

3040-01-548-6850
Linear Actuating Cylinder Piston Rod

015486850
123726A1: RNCC: 3 | RNVC: 2

1 Mar 2007

3040-01-548-4359
Counterbalance Weight

015484359
200639142: RNCC: 3 | RNVC: 2

22 Feb 2007

3040-01-549-1847
Worm Wheel Gearshaft

015491847
16D33-UE: RNCC: 3 | RNVC: 2
16D33-E: RNCC: 5 | RNVC: 9

14 Mar 2007

3040-01-549-2000
Worm Wheel Gearshaft

015492000
CL40MRSBML-E: RNCC: 3 | RNVC: 2

14 Mar 2007

3040-01-549-4017
Linear Actuating Cylinder Cap

015494017
297281A1: RNCC: 3 | RNVC: 2

20 Mar 2007

3040-01-549-5013
Remote Control Lever

015495013
347/10467: RNCC: 3 | RNVC: 2

22 Mar 2007

3040-01-549-6534
Linear Actuating Cylinder Piston

015496534
112370A4: RNCC: 3 | RNVC: 2

27 Mar 2007

3040-01-549-6200
Nonaircraft Mechanical Actuator

015496200
90025-02: RNCC: 3 | RNVC: 2
P-2415 P/N 90025-02: RNCC: 5 | RNVC: 2
P-2415: RNCC: D | RNVC: 9

27 Mar 2007

3040-01-550-1250
Rigid Connecting Link

015501250
110-170365-001: RNCC: 3 | RNVC: 2

10 Apr 2007

3040-01-551-6463
Mechanically Actuated Spindle

015516463
D-WK-871-56 PC1: RNCC: 3 | RNVC: 2

23 May 2007

3040-01-552-1733
Control Cable Assembly

015521733
D-WK-871-86 ASSY E: RNCC: 3 | RNVC: 2
F-WK-871-21 PC47: RNCC: 5 | RNVC: 1

7 Jun 2007

3040-01-552-5692
Shouldered Shaft

015525692
2741610: RNCC: 3 | RNVC: 2
2741610: RNCC: 3 | RNVC: 9

18 Jun 2007

3040-01-552-7027
Inertia Damper

015527027
SXR1037: RNCC: 3 | RNVC: 2
90-853 REV A: RNCC: 5 | RNVC: 2
21537004-2 IT 21 W/PAD-PNSXR1037: RNCC: 5 | RNVC: 2

21 Jun 2007

3040-01-553-4147
Mechanically Actuated Spindle

015534147
114857-000 POS150/151: RNCC: 3 | RNVC: 2

16 Jul 2007

3040-01-553-7259
Rigid Connecting Link

015537259
KOB0-2016-0902: RNCC: 3 | RNVC: 2

24 Jul 2007

3040-01-552-9161
Coupling Link

015529161
26NAC033465: RNCC: 3 | RNVC: 2
26NAC033465: RNCC: 3 | RNVC: 9
939871S845 FN T077: RNCC: 5 | RNVC: 9

28 Jun 2007

3040-01-552-7090
Steering Cylinder

015527090
19576512: RNCC: 3 | RNVC: 2
19576512: RNCC: 5 | RNVC: 9

21 Jun 2007

3040-01-553-9126
Shouldered Shaft

015539126
27042412: RNCC: 3 | RNVC: 2
27042412: RNCC: 5 | RNVC: 9

27 Jul 2007

3040-01-553-9508
Rigid Connecting Link

015539508
42542012: RNCC: 3 | RNVC: 2

27 Jul 2007

3040-01-554-3466
Manual Control Lever

015543466
FA0404: RNCC: 3 | RNVC: 2

7 Aug 2007

3040-01-555-3510
Linear Actuating Cylinder Assembly

015553510
FP1135: RNCC: 3 | RNVC: 2

4 Sep 2007

3040-01-555-5131
Rigid Connecting Link

015555131
A3184279: RNCC: 3 | RNVC: 2

6 Sep 2007

3040-01-556-4992
Adapter Hub Cranksh

015564992
1822594C1: RNCC: 3 | RNVC: 2
1822594C1: RNCC: 5 | RNVC: 9

3 Oct 2007

3040-01-559-1722
Flexible Shaft Assembly

015591722
115627300: RNCC: 3 | RNVC: 2

7 Dec 2007

3040-01-557-5884
Bell Crank

015575884
R0030671: RNCC: 3 | RNVC: 2
R0030671: RNCC: 5 | RNVC: 2
R0030671-0107: RNCC: D | RNVC: 9

25 Oct 2007

3040-01-560-4641
Rigid Connecting Link

015604641
9162B: RNCC: 3 | RNVC: 2
9162B: RNCC: 3 | RNVC: 9
302003W1: RNCC: 5 | RNVC: 2
PL12424404 PC 46: RNCC: 5 | RNVC: 9
302003W1: RNCC: 5 | RNVC: 9
12424404 PC 46: RNCC: 5 | RNVC: 9

31 Jan 2008

3040-01-560-0616
Control Cam

015600616
CF-1.50-SB-SBCR: RNCC: 3 | RNVC: 2
16211900 ITEM 14: RNCC: 5 | RNVC: 1

15 Jan 2008

3040-01-559-4797
Mechanical Drive Housing Part

015594797
527-5942038 PIECE 6: RNCC: 3 | RNVC: 2
1313-2 PIECE 6: RNCC: 5 | RNVC: 2

19 Dec 2007

3040-01-561-5938
Ball Joint

015615938
9512K21: RNCC: 3 | RNVC: 2
9512K21: RNCC: 5 | RNVC: 2
9512K99: RNCC: 5 | RNVC: 9

11 Mar 2008

3040-01-561-6564
Extension Shaft

015616564
S9160-6142: RNCC: 3 | RNVC: 2

13 Mar 2008

3040-01-561-8968
Shaft Collar

015618968
13940401-01: RNCC: 3 | RNVC: 2

21 Mar 2008

3040-01-562-9458
Mechanical Drive Housing Part

015629458
13017418: RNCC: 3 | RNVC: 2

25 Apr 2008

3040-01-563-3761
Rigid Connecting Link

015633761
6031732: RNCC: 3 | RNVC: 2

9 May 2008

3040-01-563-9207
Bell Crank

015639207
803-6397268 PC 160: RNCC: 3 | RNVC: 2

29 May 2008

3040-01-563-8287
Butt And Tube Assembly

015638287
061500052: RNCC: 3 | RNVC: 2
PMC8324: RNCC: 5 | RNVC: 2

23 May 2008

3040-01-563-9912
Extension Shaft

015639912
417LTH0530: RNCC: 3 | RNVC: 2

2 Jun 2008

3040-01-563-9905
Extension Shaft

015639905
217LYB1116: RNCC: 3 | RNVC: 2

2 Jun 2008

3040-01-564-2072
Shoe Type Brake

015642072
3596012: RNCC: 1 | RNVC: 2
K027787: RNCC: 3 | RNVC: 2
331226: RNCC: 3 | RNVC: 9
3596012: RNCC: 5 | RNVC: 9

9 Jun 2008

3040-01-564-5471
Shouldered Shaft

015645471
105518-2: RNCC: 3 | RNVC: 2

19 Jun 2008

3040-01-564-6221
Rigid Connecting Link

015646221
14KP515: RNCC: 3 | RNVC: 2
12508468: RNCC: 5 | RNVC: 2
14KP515: RNCC: 5 | RNVC: 9

23 Jun 2008

3040-01-564-8469
Rigid Connecting Link

015648469
55-20-0034: RNCC: 3 | RNVC: 2
55-20-0034: RNCC: 3 | RNVC: 9

30 Jun 2008

3040-01-565-0776
Shouldered Shaft

015650776
3002349: RNCC: 3 | RNVC: 2
3002349: RNCC: 5 | RNVC: 9

10 Jul 2008

3040-01-565-1248
Planetary Gears Carrier

015651248
3212376: RNCC: 3 | RNVC: 2
3212376: RNCC: 5 | RNVC: 9

14 Jul 2008

3040-01-565-1351
Remote Control Lever

015651351
6031722: RNCC: 3 | RNVC: 2

14 Jul 2008

3040-01-565-5753
Linear Actuating Cylinder Assembly Parts Kit

015655753
RG2HLTS101: RNCC: 3 | RNVC: 2

30 Jul 2008

3040-01-565-8594
Shouldered Shaft

015658594
805-1624130 PC 23 CRES316: RNCC: 3 | RNVC: 2

11 Aug 2008

3040-01-565-5754
Linear Actuating Cylinder Assembly Parts Kit

015655754
RK2HLTS101: RNCC: 3 | RNVC: 2

30 Jul 2008

3040-01-566-4941
Mechanical Drive Housing

015664941
YZ123468: RNCC: 3 | RNVC: 2
YZ121225: RNCC: 3 | RNVC: 9
YZ121954: RNCC: 5 | RNVC: 9

3 Sep 2008

3040-01-566-8024
Linear Actuating Cylinder

015668024
MIL-001-208: RNCC: 3 | RNVC: 2

10 Sep 2008

3040-01-567-1217
Cylinder Support

015671217
3683189C91: RNCC: 3 | RNVC: 2
3683189C91L: RNCC: 5 | RNVC: 9

18 Sep 2008

3040-01-567-1267
Linear Actuating Cylinder Assembly

015671267
3683187C92: RNCC: 3 | RNVC: 2
3683187C92: RNCC: 5 | RNVC: 2
3683187C91: RNCC: 5 | RNVC: 9
3683187C91L: RNCC: 5 | RNVC: 9

18 Sep 2008

3040-01-567-0645
Tension Spring Assembly

015670645
02-500-154: RNCC: 3 | RNVC: 2

17 Sep 2008

3040-01-567-3576
Rigid Connecting Link

015673576
87712376: RNCC: 3 | RNVC: 2
87474609: RNCC: 5 | RNVC: 9

24 Sep 2008

3040-01-567-4867
Straight Shaft

015674867
29530450: RNCC: 3 | RNVC: 2
22KP731: RNCC: 5 | RNVC: 1

29 Sep 2008

3040-01-567-7728
Transmission Fluid Cooler

015677728
12421258-001: RNCC: 3 | RNVC: 2
12421258-001: RNCC: 5 | RNVC: 2
12421258-001: RNCC: 5 | RNVC: 2
12421258-001: RNCC: 5 | RNVC: 9
DB-6085DC-001: RNCC: 5 | RNVC: 9
DB-6085-DC: RNCC: 5 | RNVC: 9
12421258: RNCC: 5 | RNVC: 9
12421258: RNCC: D | RNVC: 9

7 Oct 2008

3040-01-569-0411
Linear Actuating Cylinder Assembly

015690411
AH232014: RNCC: 3 | RNVC: 2
AHC10052: RNCC: 5 | RNVC: 2

18 Nov 2008

3040-01-568-9459
Breather

015689459
4401800: RNCC: 3 | RNVC: 2

14 Nov 2008

3040-01-569-5946
Control Cable Assembly

015695946
FP1995: RNCC: 3 | RNVC: 2

4 Dec 2008

3040-01-569-3625
Shouldered Shaft

015693625
13017541: RNCC: 3 | RNVC: 2

27 Nov 2008

3040-01-570-2172
Rigid Connecting Link

015702172
60745K631: RNCC: 3 | RNVC: 2

17 Dec 2008

3040-01-572-2209
Adjuster Shaft

015722209
48287: RNCC: 3 | RNVC: 2

4 Mar 2009

3040-01-572-5333
Linear Actuating Cylinder Assembly

015725333
160680B: RNCC: 3 | RNVC: 2
1684472: RNCC: 5 | RNVC: 2

13 Mar 2009

3040-01-572-5533
Linear Actuating Cylinder Assembly

015725533
170239A: RNCC: 3 | RNVC: 2
1684473: RNCC: 5 | RNVC: 2

16 Mar 2009

3040-01-573-7785
Shaft Collar

015737785
111932301: RNCC: 3 | RNVC: 2
111932301: RNCC: 5 | RNVC: 2
1119323: RNCC: D | RNVC: 9

5 May 2009

3040-01-573-7802
Push-Pull Control Assembly

015737802
60185-ZY6-003: RNCC: 3 | RNVC: 9

5 May 2009

3040-01-573-4777
Hub Clamp

015734777
111558501: RNCC: 3 | RNVC: 2
111558501: RNCC: 5 | RNVC: 2

23 Apr 2009

3040-01-575-3781
Nonaircraft Mechanical Actuator

015753781
12506158: RNCC: 1 | RNVC: 2
MIL-35-2525-R-23: RNCC: 3 | RNVC: 2
35-2525-R-23: RNCC: 5 | RNVC: 9

30 Jun 2009

3040-01-575-7772
Rigid Connecting Link

015757772
12465875-2: RNCC: 3 | RNVC: 2

14 Jul 2009

3040-01-575-8979
Linear Actuating Cylinder Assembly

015758979
R0093772: RNCC: 3 | RNVC: 2
163441: RNCC: 5 | RNVC: 2
R0093772: RNCC: 5 | RNVC: 2
R0093772-0301: RNCC: D | RNVC: 9

16 Jul 2009

3040-01-576-1952
Shouldered Shaft

015761952
4322678-15: RNCC: 3 | RNVC: 2
122-4322678 PART NO 15: RNCC: 5 | RNVC: 2
122-4322677 PART NO 13: RNCC: 5 | RNVC: 9

23 Jul 2009

3040-01-578-0185
Control Cam

015780185
2L3783: RNCC: 3 | RNVC: 2

24 Sep 2009

3040-01-578-3214
Shouldered Shaft

015783214
29540991: RNCC: 3 | RNVC: 2

1 Oct 2009

3040-01-579-0933
Breather

015790933
U000000556: RNCC: 3 | RNVC: 2
DAAK002585 SEQ #35: RNCC: 5 | RNVC: 2
PAAI013612 SEQ #35: RNCC: 5 | RNVC: 2

30 Oct 2009

3040-01-579-2212
Shouldered Shaft

015792212
5700-16D: RNCC: 3 | RNVC: 2

4 Nov 2009

3040-01-579-5185
Manual Control Lever

015795185
0350614: RNCC: 3 | RNVC: 2

16 Nov 2009

3040-01-580-5474
Rotating Shaft Eye Bracket

015805474
12528147: RNCC: 3 | RNVC: 2
12528147: RNCC: 5 | RNVC: 2
12528147: RNCC: D | RNVC: 9

17 Dec 2009

3040-01-581-6365
Disc Brake Caliper Assembly

015816365
DBC-250-SS: RNCC: 3 | RNVC: 9
DBC-250-SS: RNCC: 5 | RNVC: 9

23 Jan 2010

3040-01-581-4168
Rigid Connecting Link

015814168
3671263L01026-1: RNCC: 3 | RNVC: 9
3671263L01026-1: RNCC: C | RNVC: 1

14 Jan 2010

3040-01-581-8454
Control Cam

015818454
5005626: RNCC: 3 | RNVC: 2

29 Jan 2010

3040-01-582-1495
Nonaircraft Mechanical Actuator

015821495
SM-1020-D-1-1/85-2/20: RNCC: 3 | RNVC: 2

9 Feb 2010

3040-01-583-2638
Linear Actuating Cylinder Piston

015832638
MVG75-1130: RNCC: 3 | RNVC: 2
22KP438: RNCC: 5 | RNVC: 1
22KP438: RNCC: 5 | RNVC: 9

22 Mar 2010

3040-01-583-6482
Control Pedal

015836482
1033219: RNCC: 3 | RNVC: 2

31 Mar 2010

3040-01-584-4768
Linear Actuating Cylinder Piston Rod

015844768
0973902: RNCC: 3 | RNVC: 2

27 Apr 2010

3040-01-585-2586
Rigid Connecting Link

015852586
6V8073: RNCC: 3 | RNVC: 2

20 May 2010

3040-01-585-0351
Rigid Connecting Link

015850351
10012138: RNCC: 3 | RNVC: 2
GS-5116: RNCC: 5 | RNVC: 2

13 May 2010

3040-01-585-6805
Shaft Collar

015856805
064-50740-000: RNCC: 3 | RNVC: 2
064-50740C000: RNCC: 5 | RNVC: 2
364-48575-000 ITEM 120: RNCC: 5 | RNVC: 2

3 Jun 2010

3040-01-586-3956
Control Cam

015863956
CYR-4-S: RNCC: 3 | RNVC: 2
CYR-4-S: RNCC: 3 | RNVC: 9

28 Jun 2010

3040-01-588-3056
Rigid Connecting Link

015883056
106261: RNCC: 3 | RNVC: 2

13 Sep 2010

3040-01-588-3125
Rigid Connecting Link

015883125
111566: RNCC: 3 | RNVC: 2

13 Sep 2010

3040-01-588-4181
Shouldered Shaft

015884181
41010959-205: RNCC: 3 | RNVC: 2

16 Sep 2010

3040-01-588-7182
Rigid Connecting Link

015887182
3314869-1: RNCC: 3 | RNVC: 2

30 Sep 2010

3040-01-589-0733
Rigid Connecting Link

015890733
3685166C91: RNCC: 3 | RNVC: 2

18 Oct 2010

3040-01-589-2253
Shouldered Shaft Assembly

015892253
12540451: RNCC: 3 | RNVC: 2
04088137: RNCC: 5 | RNVC: 2

21 Oct 2010

3040-01-588-6747
Brake Shoe Set

015886747
95SK343: RNCC: 3 | RNVC: 2
95SK343: RNCC: 5 | RNVC: 9

29 Sep 2010

3040-01-590-1146
Kit Seal

015901146
A97-P0H-AA: RNCC: 3 | RNVC: 9

18 Nov 2010

3040-01-591-4029
Remote Control Lever

015914029
8M0026173: RNCC: 3 | RNVC: 2
899084003: RNCC: 5 | RNVC: 9

25 Jan 2011

3040-01-592-6770
Straight Shaft

015926770
817415T: RNCC: 3 | RNVC: 2

15 Mar 2011

3040-01-592-9361
Nonaircraft Mechanical Actuator

015929361
AH13A020: RNCC: 3 | RNVC: 2
28023-512-0206 PC 10: RNCC: 5 | RNVC: 2

29 Mar 2011

3040-01-592-8201
Manual Control Lever

015928201
12540579: RNCC: 3 | RNVC: 2

22 Mar 2011

3040-01-593-8788
Rigid Connecting Link

015938788
955AS307-1: RNCC: 3 | RNVC: 2
955AS307-1: RNCC: 5 | RNVC: 2

20 Apr 2011

3040-01-595-9866
Shouldered Shaft Assembly

015959866
767048: RNCC: 3 | RNVC: 2

10 May 2011

3040-01-597-2151
Shaft Collar

015972151
7019315-02: RNCC: 3 | RNVC: 2

2 Jun 2011

3040-01-598-9573
Shouldered Shaft

015989573
29-47228-1: RNCC: 3 | RNVC: 2

6 Sep 2011

3040-01-600-7026
Linear Actuating Cylinder Assembly

016007026
3776821133: RNCC: 3 | RNVC: 2

15 Dec 2011

3040-01-601-0941
Shouldered Shaft

016010941
52720823: RNCC: 3 | RNVC: 2
24KP272: RNCC: 5 | RNVC: 2
24KP272: RNCC: 5 | RNVC: 9

5 Jan 2012

3040-01-601-0955
Shouldered Shaft

016010955
52720825: RNCC: 3 | RNVC: 2
24KP273: RNCC: 5 | RNVC: 2
24KP273: RNCC: 5 | RNVC: 9

5 Jan 2012

3040-01-602-9177
Housing Adapter

016029177
14647: RNCC: 3 | RNVC: 2
26KP436: RNCC: 5 | RNVC: 2
26KP436: RNCC: 5 | RNVC: 9

13 Feb 2012

3040-01-603-7517
Mechanical Drive Housing Part

016037517
130226-1605: RNCC: 3 | RNVC: 2
M04160004: RNCC: 5 | RNVC: 9

14 Mar 2012

3040-01-606-0145
Shouldered Shaft

016060145
25KP190: RNCC: 3 | RNVC: 2
25KP190: RNCC: 3 | RNVC: 9

3 May 2012

3040-01-606-2174
Rigid Connecting Link

016062174
KS9511: RNCC: 3 | RNVC: 2
KS9261AP PC NO 28: RNCC: 5 | RNVC: 2

11 May 2012

3040-01-606-7610
Flexible Casing End Fitting

016067610
2ABS12003: RNCC: 3 | RNVC: 2
2ABS12003: RNCC: 3 | RNVC: 9

23 May 2012

3040-01-607-2205
Mechanical Drive Housing

016072205
41101-ZY3-C00ZA: RNCC: 3 | RNVC: 9

5 Jun 2012

3040-01-607-3242
Flexible Shaft Assembly

016073242
2ABC12006: RNCC: 3 | RNVC: 2
2ABC12006: RNCC: 3 | RNVC: 9

8 Jun 2012

3040-01-548-2494
Pivot Shaft Assembly

015482494
16232055-2: RNCC: 3 | RNVC: 2
16232052 FIND NO.1: RNCC: 5 | RNVC: 1
16232055-2: RNCC: 5 | RNVC: 9

15 Feb 2007

3040-01-557-4644
Mechanical Drive Housing

015574644
3211887: RNCC: 3 | RNVC: 2
3211887: RNCC: 5 | RNVC: 9

24 Oct 2007

3040-01-559-3240
Lift Bar Slider Weldment

015593240
1182208: RNCC: 3 | RNVC: 2

13 Dec 2007

3040-01-458-0784
Body Hub

014580784
5-16-7108-00-01G: RNCC: 3 | RNVC: 2

12 Aug 1998

3040-01-457-1054
Mechanical Drive Housing Part

014571054
105900R: RNCC: 3 | RNVC: 2
105900R: RNCC: 5 | RNVC: 9

11 Jul 1998

3040-01-459-4000
Linear Actuating Cylinder Assembly

014594000
B-11336: RNCC: 3 | RNVC: 2
1510-61-21S-7X10: RNCC: 5 | RNVC: 9

30 Sep 1998

3040-01-460-7209
Straight Shaft

014607209
12468747: RNCC: 3 | RNVC: 2
AE12468747: RNCC: 5 | RNVC: 2
12468746: RNCC: 5 | RNVC: 9
12468746: RNCC: C | RNVC: 1

13 Nov 1998

3040-01-461-3234
Linear Actuating Cylinder Piston

014613234
82183: RNCC: 3 | RNVC: 2

9 Dec 1998

3040-01-461-3391
Linear Actuating Cylinder Piston

014613391
82123: RNCC: 3 | RNVC: 2
82123: RNCC: 3 | RNVC: 9

9 Dec 1998

3040-01-460-5660
Piston Head

014605660
82101: RNCC: 3 | RNVC: 9

9 Nov 1998

3040-01-461-1425
Shouldered Shaft

014611425
223F435: RNCC: 3 | RNVC: 2
10053602: RNCC: 5 | RNVC: 9

1 Dec 1998

3040-01-462-5049
Cylinder Support

014625049
3143295: RNCC: 3 | RNVC: 2
3143295: RNCC: 5 | RNVC: 9

5 Feb 1999

3040-01-468-0459
Linear Actuating Cylinder Assembly

014680459
AG201170F0: RNCC: 3 | RNVC: 2

27 Sep 1999

3040-01-468-3488
Piston Rod Guide

014683488
2755841-0001: RNCC: 3 | RNVC: 2
2755841: RNCC: 5 | RNVC: 2

7 Oct 1999

3040-01-468-7308
Push-Pull Control Assembly

014687308
200-03333-0095: RNCC: 3 | RNVC: 2

20 Oct 1999

3040-01-469-3163
Pawl

014693163
96-9011: RNCC: 3 | RNVC: 2
96-9011: RNCC: 5 | RNVC: 9
96-9011: RNCC: 5 | RNVC: 9

10 Nov 1999

3040-01-469-7931
Shaft Collar

014697931
124-4322649 PC12: RNCC: 3 | RNVC: 2
124-4322648 PC35: RNCC: 5 | RNVC: 9
124-4322649 PC12: RNCC: 5 | RNVC: 9
4322648: RNCC: 5 | RNVC: 9
4322649: RNCC: 5 | RNVC: 9

24 Nov 1999

3040-01-469-8062
Manual Control Lever

014698062
524271: RNCC: 3 | RNVC: 2
8HB273: RNCC: 5 | RNVC: 2
8HB273: RNCC: 5 | RNVC: 9
524271: RNCC: 5 | RNVC: 9

24 Nov 1999

3040-01-469-7596
Rigid Connecting Link

014697596
9139765-10: RNCC: 3 | RNVC: 2
9139765-10: RNCC: 3 | RNVC: 2

23 Nov 1999

3040-01-470-5794
Straight Shaft

014705794
124-4366739 PC 7: RNCC: 3 | RNVC: 2
124-4322648 PC 24: RNCC: 3 | RNVC: 2
124-6293626 PC 6: RNCC: 3 | RNVC: 2
124-4366739: RNCC: D | RNVC: 9
124-6293626: RNCC: D | RNVC: 9
124-4322648: RNCC: D | RNVC: 9

27 Dec 1999

3040-01-462-9972
Manual Control Lever

014629972
707917A00: RNCC: 3 | RNVC: 2
8-8-22: RNCC: 5 | RNVC: 2
707917-A: RNCC: 5 | RNVC: 9

1 Mar 1999

3040-01-463-6757
Shouldered Shaft

014636757
3C3563P12: RNCC: 3 | RNVC: 2
3C3563P12: RNCC: 5 | RNVC: 2

31 Mar 1999

3040-01-465-5649
Swivel Sleeve Link

014655649
3305AS623-1: RNCC: 3 | RNVC: 2
3305AS623-1: RNCC: 3 | RNVC: 9
3305AS623-1: RNCC: 5 | RNVC: 9

14 Jun 1999

3040-01-465-3178
Control Cam

014653178
5590540: RNCC: 3 | RNVC: 2
B18-09312-B: RNCC: 5 | RNVC: 2
B18-09312-E: RNCC: D | RNVC: 9
5590540-D: RNCC: D | RNVC: 9

1 Jun 1999

3040-01-467-9103
Straight Shaft

014679103
30386: RNCC: 3 | RNVC: 2

20 Sep 1999

3040-01-473-8374
Shaft Collar

014738374
AT180023: RNCC: 3 | RNVC: 9

18 Apr 2000

3040-01-474-0015
Rigid Connecting Link

014740015
9217-13: RNCC: 3 | RNVC: 2
9217-13: RNCC: 3 | RNVC: 9

20 Apr 2000

3040-01-474-3530
Linear Actuating Cylinder Cap

014743530
CC30835-001: RNCC: 3 | RNVC: 2
29176: RNCC: 5 | RNVC: 9
170-40300, ITEM 8: RNCC: 7 | RNVC: 2

2 May 2000

3040-01-474-4845
Rigid Connecting Link

014744845
9724756: RNCC: 3 | RNVC: 2
TH109873: RNCC: 5 | RNVC: 9

4 May 2000

3040-01-475-0586
Spur Gearshaft

014750586
14204-151-000: RNCC: 3 | RNVC: 2
14204: RNCC: D | RNVC: 9

19 May 2000

3040-01-475-5490
Shouldered Shaft

014755490
2784596-2: RNCC: 3 | RNVC: 2
2784596: RNCC: D | RNVC: 9

7 Jun 2000

3040-01-475-5551
Grease Retainer

014755551
626858-1: RNCC: 3 | RNVC: 2
626858-1: RNCC: 5 | RNVC: 2
626858-1: RNCC: 5 | RNVC: 2
626858: RNCC: D | RNVC: 9

7 Jun 2000

3040-01-475-7378
Rigid Connecting Link

014757378
6522-131: RNCC: 3 | RNVC: 2
74B428009-131: RNCC: 5 | RNVC: 2
74B428009-131: RNCC: 5 | RNVC: 2
10153955: RNCC: 6 | RNVC: 9
74B428009: RNCC: 7 | RNVC: 1

12 Jun 2000

3040-01-476-4678
Mechanically Actuated Spindle

014764678
HN152-1103 PART NO. 29: RNCC: 3 | RNVC: 2
HN152-1104 PART NO. 11: RNCC: 5 | RNVC: 2
124-1900973 PAR: RNCC: C | RNVC: 1

13 Jul 2000

3040-01-478-0974
Straight Shaft

014780974
131416: RNCC: 3 | RNVC: 2

30 Aug 2000

3040-01-478-4075
Differential Gear Unit

014784075
B411021: RNCC: 3 | RNVC: 2
41633K2: RNCC: 5 | RNVC: 9
A-41102-1: RNCC: 5 | RNVC: 9

12 Sep 2000

3040-01-477-3372
Multiple Gears Gearshaft

014773372
9904106168: RNCC: 3 | RNVC: 2

7 Aug 2000

3040-01-479-4061
Flexible Core End Fitting

014794061
047639: RNCC: 3 | RNVC: 2
047639: RNCC: 3 | RNVC: 9
581960-003: RNCC: 5 | RNVC: 2
A47639: RNCC: D | RNVC: 9
581960: RNCC: D | RNVC: 9

19 Oct 2000

3040-01-480-7309
Shouldered Shaft

014807309
5714943: RNCC: 3 | RNVC: 2
24203400: RNCC: 3 | RNVC: 2
3040PL0739448: RNCC: 6 | RNVC: 9

4 Dec 2000

3040-01-481-8447
Mechanical Drive Housing

014818447
12446196: RNCC: 3 | RNVC: 2

29 Jan 2001

3040-01-481-6343
Tran Shoulder Shaft

014816343
10052612: RNCC: 3 | RNVC: 2

18 Jan 2001

3040-01-482-0368
Rigid Connecting Link

014820368
803-6397269 PC 36: RNCC: 3 | RNVC: 2
8100-1251-0307 PC NO 62: RNCC: 5 | RNVC: 2
8100-1251-0307: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9

6 Feb 2001

3040-01-482-3930
Push-Pull Control Assembly

014823930
580-530-018: RNCC: 3 | RNVC: 2
LE161-0023: RNCC: 7 | RNVC: 2
580-530-018: RNCC: C | RNVC: 1

20 Feb 2001

3040-01-483-4383
Spline Adapter

014834383
3476AS112-1: RNCC: 3 | RNVC: 2

29 Mar 2001

3040-01-483-8076
Mechanically Actuated Spindle

014838076
8100-1251-0308 PC 123: RNCC: 3 | RNVC: 2
8100-1251-0308: RNCC: C | RNVC: 1
6397269: RNCC: D | RNVC: 9

9 Apr 2001

3040-01-485-8407
Mechanical Drive Housing

014858407
6935092: RNCC: 3 | RNVC: 2

8 Jun 2001

3040-01-486-1830
Rigid Connecting Link

014861830
8100-1256-0262 PT NO 222: RNCC: 3 | RNVC: 2
8100-1256-0262: RNCC: D | RNVC: 9

20 Jun 2001

3040-01-486-4731
Shouldered Shaft

014864731
342-7067322-81: RNCC: 3 | RNVC: 2
H643-7003-81: RNCC: 5 | RNVC: 2
H643-7003: RNCC: D | RNVC: 9
7067322: RNCC: D | RNVC: 9

29 Jun 2001

3040-01-487-5104
Nonrotating Shaft Eye Bracket

014875104
5749855-001: RNCC: 3 | RNVC: 2
5749855-001: RNCC: 5 | RNVC: 2
574-5749855: RNCC: D | RNVC: 9

8 Aug 2001

3040-01-495-1261
Remote Control Lever

014951261
6546C017-1: RNCC: 3 | RNVC: 2
6546C017: RNCC: D | RNVC: 9

7 Mar 2002

3040-01-491-1580
Nonrotating Shaft Eye Bracket

014911580
9HA831: RNCC: 3 | RNVC: 2
9HA831: RNCC: 3 | RNVC: 9
1132 SR-3: RNCC: 5 | RNVC: 2

15 Oct 2001

3040-01-496-1983
Bell Crank

014961983
12255: RNCC: 3 | RNVC: 2
12255: RNCC: 5 | RNVC: 9

5 Apr 2002

3040-01-497-0991
Counterbalance Weight

014970991
5128T01P01: RNCC: 3 | RNVC: 2
5128T01P01: RNCC: 5 | RNVC: 9

9 May 2002

3040-01-497-0995
Counterbalance Weight

014970995
5126T81P01: RNCC: 3 | RNVC: 2
5126T8P01: RNCC: 5 | RNVC: 9

9 May 2002

3040-01-497-5165
Shaft Collar

014975165
137550: RNCC: 3 | RNVC: 2

22 May 2002

3040-01-497-6332
Rigid Connecting Link

014976332
C-106-21: RNCC: 3 | RNVC: 2
803-6397268 PC 87 MOD CRES 316: RNCC: 5 | RNVC: 2
6397268: RNCC: D | RNVC: 9

29 May 2002

3040-01-497-5452
Straight Shaft

014975452
154070: RNCC: 3 | RNVC: 2

23 May 2002

3040-01-501-5680
Straight Shaft

015015680
596-7409665-1: RNCC: 3 | RNVC: 2
B831-2130-1: RNCC: 5 | RNVC: 2
596-7409665: RNCC: D | RNVC: 9

7 Oct 2002

3040-01-502-6091
Rigid Connecting Link

015026091
74A675230-1005: RNCC: 3 | RNVC: 2
74A675230-1005: RNCC: 5 | RNVC: 9

14 Nov 2002

3040-01-502-4062
Shaft Collar

015024062
V2C13624-1: RNCC: 3 | RNVC: 2
V1E10517 ITEM 10: RNCC: 5 | RNVC: 2
V1E10517: RNCC: D | RNVC: 9

5 Nov 2002

3040-01-503-3307
Shouldered Shaft

015033307
8HB302: RNCC: 3 | RNVC: 2
8HB302: RNCC: 3 | RNVC: 9
N7478: RNCC: 5 | RNVC: 2

12 Dec 2002

3040-01-503-3574
Bevel Gear And Shaft Assembly

015033574
1321222: RNCC: 3 | RNVC: 2
4131303198: RNCC: 5 | RNVC: 9
1321222: RNCC: 5 | RNVC: 9

13 Dec 2002

3040-01-503-4616
Straight Shaft

015034616
3935892: RNCC: 3 | RNVC: 2
2 0071-888: RNCC: 5 | RNVC: 2
2 0071-888: RNCC: 5 | RNVC: 9

18 Dec 2002

3040-01-503-7500
Shouldered Shaft

015037500
596-7410507-7: RNCC: 3 | RNVC: 2
596-7410332-6: RNCC: 5 | RNVC: 2
B434-5410-6: RNCC: 5 | RNVC: 2
B434-5412-7: RNCC: 5 | RNVC: 2
596-7410507-12: RNCC: C | RNVC: 1
7410507: RNCC: D | RNVC: 9
7410332: RNCC: D | RNVC: 9

7 Jan 2003

3040-01-504-2872
Shouldered Shaft

015042872
7135912: RNCC: 3 | RNVC: 2
7135912: RNCC: 5 | RNVC: 9

24 Jan 2003

3040-01-505-2870
Push-Pull Control Assembly

015052870
79V00-3-180: RNCC: 3 | RNVC: 2
535675: RNCC: 5 | RNVC: 9

28 Feb 2003

3040-01-506-0999
Ball Retard

015060999
35221902: RNCC: 3 | RNVC: 2

24 Mar 2003

3040-01-506-7173
Shaft Collar

015067173
2588095: RNCC: 3 | RNVC: 2

8 Apr 2003

3040-01-507-4153
Body Hub

015074153
2624745-4: RNCC: 3 | RNVC: 2

28 Apr 2003

3040-01-507-7888
Spur Gearshaft

015077888
1703420: RNCC: 3 | RNVC: 2
1703420: RNCC: 5 | RNVC: 2

6 May 2003

3040-01-509-5525
Worm Wheel Gearshaft

015095525
46-2103-1: RNCC: 3 | RNVC: 2

25 Jun 2003

3040-01-508-1199
Remote Control Lever

015081199
12477633: RNCC: 3 | RNVC: 2
12477633: RNCC: 5 | RNVC: 2
12477633: RNCC: D | RNVC: 9

13 May 2003

3040-01-510-1066
Shouldered Shaft

015101066
1024509: RNCC: 3 | RNVC: 2

14 Jul 2003

3040-01-512-5521
Spur Gearshaft

015125521
7C1-06227: RNCC: 3 | RNVC: 2
7D3-07771 REV.F ITEM 8: RNCC: 5 | RNVC: 2

4 Sep 2003

3040-01-512-6090
Control Cam

015126090
1HA10: RNCC: 3 | RNVC: 2
1HA10: RNCC: 3 | RNVC: 9
5002743-025: RNCC: 5 | RNVC: 2

5 Sep 2003

3040-01-512-7493
Mechanical Drive Housing Part

015127493
12314647: RNCC: 3 | RNVC: 2

9 Sep 2003

3040-01-513-6333
Shouldered Shaft Assembly

015136333
3351621: RNCC: 3 | RNVC: 2
3351621: RNCC: 3 | RNVC: 9
3351621MS: RNCC: 5 | RNVC: 2

1 Oct 2003

3040-01-514-3557
Shaft Collar

015143557
6435K43: RNCC: 3 | RNVC: 2

23 Oct 2003

3040-01-514-4466
Mechanical Drive Housing

015144466
531802-6: RNCC: 3 | RNVC: 2
531802-7: RNCC: 5 | RNVC: 9
531802-6: RNCC: 5 | RNVC: 9
531802: RNCC: D | RNVC: 9

27 Oct 2003

3040-01-515-2054
Shouldered Shaft Assembly

015152054
1KK264: RNCC: 3 | RNVC: 2
1KK264: RNCC: 3 | RNVC: 9
6502810: RNCC: 5 | RNVC: 9

18 Nov 2003

3040-01-515-1944
Linear Actuating Cylinder Assembly

015151944
1KK274: RNCC: 3 | RNVC: 2
1KK274: RNCC: 3 | RNVC: 9
6502900: RNCC: 5 | RNVC: 9

18 Nov 2003

3040-01-516-3728
Manual Control Lever

015163728
DN60-8-18: RNCC: 3 | RNVC: 2
DN60-8-18: RNCC: 3 | RNVC: 9
DNX62-6Q8-000 ITEM 31: RNCC: 5 | RNVC: 2
DNX62-6Q8-000 ITEM 31: RNCC: 5 | RNVC: 9
DNX62-6Q8-000: RNCC: D | RNVC: 9

6 Jan 2004

3040-01-516-5280
Flexible Shaft Assembly

015165280
57353-84: RNCC: 3 | RNVC: 2

9 Jan 2004

3040-01-517-9270
Shaft Retaining Plate

015179270
13005070: RNCC: 3 | RNVC: 2

25 Feb 2004

3040-01-517-5767
Nonrotating Shaft Eye Bracket

015175767
9912.0028: RNCC: 3 | RNVC: 2
8HE900: RNCC: C | RNVC: 1

12 Feb 2004

3040-01-518-1992
Brake Disc

015181992
PL79221 ITEM 7: RNCC: 3 | RNVC: 9
75071: RNCC: 5 | RNVC: 2

4 Mar 2004

3040-01-518-2105
Bell Crank

015182105
3929AS861: RNCC: 3 | RNVC: 2
74A733551-2003: RNCC: 3 | RNVC: 9
3929AS861: RNCC: 5 | RNVC: 2
3929AS861: RNCC: 5 | RNVC: 2
3929AS861: RNCC: 5 | RNVC: 2
3929AS861: RNCC: 5 | RNVC: 2
3929AS861: RNCC: 5 | RNVC: 2

4 Mar 2004

3040-01-518-3526
Rigid Connecting Link

015183526
3418889: RNCC: 3 | RNVC: 2
104-3568: RNCC: 5 | RNVC: 9

9 Mar 2004

3040-01-519-7246
Aircr Adjusting Rod

015197246
21C8029P47: RNCC: 3 | RNVC: 2
21C8029P47: RNCC: 3 | RNVC: 9

29 Apr 2004

3040-01-521-1810
Mechanical Drive Housing

015211810
880686A53: RNCC: 3 | RNVC: 2
1623-859399T 17: RNCC: 3 | RNVC: 9
880686T39: RNCC: 5 | RNVC: 9

14 Jun 2004

3040-01-522-2979
Rigid Connecting Link

015222979
12423354-004: RNCC: 3 | RNVC: 2
12423354-004: RNCC: 5 | RNVC: 2
12423354-002: RNCC: 5 | RNVC: 9
12423354: RNCC: D | RNVC: 9

26 Jul 2004

3040-01-522-3532
Straight Shaft

015223532
P424372N: RNCC: 3 | RNVC: 2
P424372N: RNCC: 3 | RNVC: 9

28 Jul 2004

3040-01-522-5572
Manual Control Lever

015225572
K1393: RNCC: 3 | RNVC: 2

4 Aug 2004

3040-01-524-6801
Manual Control Lever

015246801
DN60-3-21: RNCC: 3 | RNVC: 2
DN60-3-21: RNCC: 3 | RNVC: 9
DNX62-3L4-000 ITEM 35: RNCC: 5 | RNVC: 2
DNX62-3L4-000 ITEM 35: RNCC: 5 | RNVC: 9
DNX62-3L4-000: RNCC: D | RNVC: 9

12 Oct 2004

3040-01-525-1022
Brake Disc

015251022
05045001: RNCC: 3 | RNVC: 2

28 Oct 2004

3040-01-526-0101
Shouldered Shaft

015260101
226-4377: RNCC: 3 | RNVC: 2

3 Dec 2004

3040-01-477-8468
Straight Shaft

014778468
09-0237: RNCC: 3 | RNVC: 2
3573AS224-1: RNCC: 5 | RNVC: 2
3573AS224: RNCC: D | RNVC: 9

21 Aug 2000

3040-01-477-8953
Pivot Shaft Assembly

014778953
6810001994: RNCC: 3 | RNVC: 2

23 Aug 2000

3040-01-476-6932
Rigid Connecting Link

014766932
6519-127: RNCC: 3 | RNVC: 2
74B428009-127: RNCC: 5 | RNVC: 2
74B428009-127: RNCC: 7 | RNVC: 2

20 Jul 2000

3040-01-477-1908
Shouldered Shaft

014771908
9904104424: RNCC: 3 | RNVC: 2

2 Aug 2000

3040-01-478-2006
Aircraf Control Cam

014782006
772028: RNCC: 3 | RNVC: 2

31 Aug 2000

3040-01-483-8119
Spline Adapter

014838119
2131301: RNCC: 3 | RNVC: 2
G2131301: RNCC: 5 | RNVC: 2
3131601: RNCC: D | RNVC: 9

9 Apr 2001

3040-01-492-6418
Shaft Collar

014926418
50306000-13: RNCC: 3 | RNVC: 2
50301240 FIND 33: RNCC: 5 | RNVC: 2
50301240 FIND 33: RNCC: 5 | RNVC: 9
50306000-13: RNCC: 5 | RNVC: 9

7 Dec 2001

3040-01-493-4622
Linear Actuating Cylinder Assembly

014934622
863-110994: RNCC: 3 | RNVC: 2
1.06DXPSRD4D: RNCC: 5 | RNVC: 2

8 Jan 2002

3040-01-494-3956
Shouldered Shaft

014943956
A36541: RNCC: 3 | RNVC: 2
A36541: RNCC: 5 | RNVC: 9
17-1-6734: RNCC: 7 | RNVC: 2

11 Feb 2002

3040-01-494-2421
Rigid Connecting Link

014942421
160D123147-11: RNCC: 3 | RNVC: 2
160D123147-11: RNCC: 5 | RNVC: 9
160D123147: RNCC: D | RNVC: 9

5 Feb 2002

3040-01-494-7940
Body Hub

014947940
11727816: RNCC: 3 | RNVC: 2

22 Feb 2002

3040-01-495-0520
Shouldered Shaft

014950520
6546D061-1: RNCC: 3 | RNVC: 2
6546D061: RNCC: D | RNVC: 9

5 Mar 2002

3040-01-488-7666
Tooth Pin

014887666
71001195: RNCC: 3 | RNVC: 2

4 Sep 2001

3040-01-494-6825
Sleeve Tube

014946825
9330765: RNCC: 3 | RNVC: 2
9330765: RNCC: 5 | RNVC: 2
9330765: RNCC: 5 | RNVC: 9

20 Feb 2002

3040-01-458-9040
Linear Actuating Cylinder Assembly

014589040
6-372-004378: RNCC: 3 | RNVC: 9

15 Sep 1998

3040-01-459-0417
Linear Actuating Cylinder Assembly

014590417
6-372-004430: RNCC: 3 | RNVC: 2

18 Sep 1998

3040-01-461-5128
Shaft Collar

014615128
56703: RNCC: 3 | RNVC: 9
SD-2421: RNCC: D | RNVC: 9

16 Dec 1998

3040-01-470-2047
Rigid Connecting Link

014702047
124-4454122 PC 45: RNCC: 3 | RNVC: 2
124-4322613 PC 23: RNCC: 5 | RNVC: 2
4322613: RNCC: D | RNVC: 9
4454122: RNCC: D | RNVC: 9

10 Dec 1999

3040-01-462-5833
Piston Ring

014625833
74A410855-2003: RNCC: 3 | RNVC: 2
74A410855-2003: RNCC: 5 | RNVC: 2
74A410855-2003: RNCC: 5 | RNVC: 2
74A410855-2003: RNCC: 5 | RNVC: 2
74A410855-2003: RNCC: 5 | RNVC: 2
74A410855-2003: RNCC: 5 | RNVC: 2
74A410855-2003: RNCC: 5 | RNVC: 9
74A410855-2003: RNCC: 5 | RNVC: 9
74A410855-2003: RNCC: 5 | RNVC: 9
10412373: RNCC: 6 | RNVC: 9

9 Feb 1999

3040-01-472-1662
Shouldered Shaft

014721662
10053533: RNCC: 3 | RNVC: 2

18 Feb 2000

3040-01-491-5690
Flexible Shaft Assembly

014915690
22001-100 X 111IN: RNCC: 3 | RNVC: 2
22001-100 X 9FT 3IN: RNCC: 5 | RNVC: 2
B-409-22001-100: RNCC: 5 | RNVC: 9
22001: RNCC: D | RNVC: 9

25 Oct 2001

3040-01-492-2750
Control Cam

014922750
157334: RNCC: 3 | RNVC: 2
157334: RNCC: 5 | RNVC: 2

20 Nov 2001

3040-01-492-9069
Linear Actuating Cylinder Piston

014929069
41408: RNCC: 3 | RNVC: 2
63000-41400 ITEM 8: RNCC: 5 | RNVC: 2
63000-41400: RNCC: D | RNVC: 9

15 Dec 2001

3040-01-492-9071
Linear Actuating Cylinder

014929071
41407: RNCC: 3 | RNVC: 2
63000-41400 ITEM 7: RNCC: 5 | RNVC: 2
63000-41400: RNCC: D | RNVC: 9

15 Dec 2001

3040-01-493-2187
Flexible Shaft Assembly

014932187
22001-100 X 480IN: RNCC: 3 | RNVC: 2
B-409-22001: RNCC: D | RNVC: 9

20 Dec 2001

3040-01-493-8720
Rigid Connecting Link

014938720
8100-1251-0192 PC 150 & 151: RNCC: 3 | RNVC: 2
8100-1251-0192: RNCC: D | RNVC: 9

23 Jan 2002

3040-01-495-1286
Rigid Connecting Link

014951286
983-WH11-088: RNCC: 3 | RNVC: 2

7 Mar 2002

3040-01-495-9553
Manual Control Lever

014959553
C-4192: RNCC: 3 | RNVC: 2
90-228-1 ITEM 4: RNCC: 5 | RNVC: 9
90-228-1: RNCC: D | RNVC: 9

28 Mar 2002

3040-01-523-9479
Hydraulic Accumulator

015239479
227-8807: RNCC: 3 | RNVC: 2
227-8807: RNCC: 5 | RNVC: 2

20 Sep 2004

3040-01-471-9922
Rigid Connecting Link

014719922
901-031-635-111: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-462-9932
Rigid Connecting Link

014629932
741093-K1: RNCC: 3 | RNVC: 9
741093K01: RNCC: 5 | RNVC: 2
8-35-16: RNCC: 5 | RNVC: 2

1 Mar 1999

3040-01-459-4466
Brake Disc

014594466
5-66-8462-00: RNCC: 3 | RNVC: 2

1 Oct 1998

3040-01-460-0019
Shaft Collar

014600019
10840: RNCC: 3 | RNVC: 2
LS-28049: RNCC: D | RNVC: 9

22 Oct 1998

3040-01-461-3042
Housing Adapter

014613042
1378AS221-1: RNCC: 3 | RNVC: 2

8 Dec 1998

3040-01-461-3058
Shouldered Axle

014613058
2559791-5: RNCC: 3 | RNVC: 2

8 Dec 1998

3040-01-468-6770
Multiple Disk Brake

014686770
90B2A3G107: RNCC: 3 | RNVC: 2
50NA-A ITEM 2: RNCC: 5 | RNVC: 2
90B2M3G107: RNCC: 5 | RNVC: 9
50NA-A: RNCC: D | RNVC: 9

19 Oct 1999

3040-01-469-1139
Nonaircraft Mechanical Actuator

014691139
EA1002: RNCC: 3 | RNVC: 2

3 Nov 1999

3040-01-469-1452
Bell Crank

014691452
2682401: RNCC: 3 | RNVC: 2
10183083: RNCC: 6 | RNVC: 9

4 Nov 1999

3040-01-469-2194
Shouldered Shaft

014692194
LSCP580162: RNCC: 3 | RNVC: 2
LSBY5800121-1: RNCC: 5 | RNVC: 9
LSBY5800121-25: RNCC: 5 | RNVC: 9

8 Nov 1999

3040-01-469-2193
Shaft Collar

014692193
LSCP580125: RNCC: 3 | RNVC: 2
LSCP580125: RNCC: 5 | RNVC: 2
LSBY5800121-4: RNCC: 5 | RNVC: 9

8 Nov 1999

3040-01-469-5777
Rigid Connecting Link

014695777
124-4322649 PC 53: RNCC: 3 | RNVC: 2
124-4322648 PC 9: RNCC: 5 | RNVC: 2
4322649: RNCC: D | RNVC: 9

16 Nov 1999

3040-01-469-6278
Joystick Controller

014696278
NSOSFA-15089: RNCC: 3 | RNVC: 2
NSO-SFA: RNCC: 5 | RNVC: 9
NSOSF-101.5029: RNCC: 5 | RNVC: 9
NSO-SFN1RX: RNCC: 5 | RNVC: 9
NSO-SF: RNCC: C | RNVC: 1
NSO-SFN3RX101.5: RNCC: C | RNVC: 1

17 Nov 1999

3040-01-469-3408
Hydraulic Accumulator

014693408
862441: RNCC: 3 | RNVC: 2

12 Nov 1999

3040-01-469-6619
Shouldered Shaft Assembly

014696619
814150-4: RNCC: 3 | RNVC: 2

18 Nov 1999

3040-01-469-8659
Rigid Connecting Link

014698659
803-6397268 PC74: RNCC: 3 | RNVC: 2
803-6397269C48: RNCC: 5 | RNVC: 2
803-6397268 PC74B: RNCC: 5 | RNVC: 9
803-6397269 PC48B: RNCC: 5 | RNVC: 9
6397268: RNCC: D | RNVC: 9

29 Nov 1999

3040-01-469-9975
Mechanically Actuated Spindle

014699975
124-4399311 PC 15: RNCC: 3 | RNVC: 2
124-4322648 PC 23: RNCC: 5 | RNVC: 2
4399311: RNCC: D | RNVC: 9
4322648: RNCC: D | RNVC: 9

3 Dec 1999

3040-01-463-4691
Linear Actuating Cylinder

014634691
15095-37190-6: RNCC: 3 | RNVC: 2
37195: RNCC: 5 | RNVC: 2

24 Mar 1999

3040-01-464-2189
Control Cam

014642189
030519003: RNCC: 3 | RNVC: 2
03.0519.003: RNCC: 5 | RNVC: 9
03.0519.003: RNCC: 5 | RNVC: 9
11.1427: RNCC: D | RNVC: 9

21 Apr 1999

3040-01-465-1496
Linear Actuating Cylinder Assembly

014651496
37180: RNCC: 3 | RNVC: 2
30093-37175 ITEM 6: RNCC: 5 | RNVC: 2

24 May 1999

3040-01-465-1742
Manual Control Lever

014651742
530255: RNCC: 3 | RNVC: 2
530255: RNCC: 5 | RNVC: 9
530255: RNCC: 5 | RNVC: 9

25 May 1999

3040-01-466-8112
Adjusting Rod

014668112
32K-0024: RNCC: 3 | RNVC: 2
32K-0050 FIND 21: RNCC: 5 | RNVC: 2
32K-0050: RNCC: D | RNVC: 9

3 Aug 1999

3040-01-467-3995
Flexible Drive Shaft

014673995
15612019-10: RNCC: 3 | RNVC: 2
15612019-10: RNCC: 3 | RNVC: 9
15611200 FIND 18: RNCC: 5 | RNVC: 9
15612019-1: RNCC: C | RNVC: 1
15611200 FIND 18: RNCC: C | RNVC: 1
15612019: RNCC: D | RNVC: 9
15611200: RNCC: D | RNVC: 9

26 Aug 1999

3040-01-467-4065
Straight Shaft

014674065
3231: RNCC: 3 | RNVC: 2

27 Aug 1999

3040-01-467-4469
Flexible Drive Shaft

014674469
15612019-2: RNCC: 3 | RNVC: 2
15612019-2: RNCC: 3 | RNVC: 9
15611211 FIND 13: RNCC: 5 | RNVC: 9
15611211 FIND 13: RNCC: 5 | RNVC: 9
15612019: RNCC: D | RNVC: 9
15611211: RNCC: D | RNVC: 9

30 Aug 1999

3040-01-467-7882
Linear Actuating Cylinder Assembly

014677882
AG201174B0: RNCC: 3 | RNVC: 2

15 Sep 1999

3040-01-467-4634
Ammunition Cartridge Guide

014674634
7-317237340: RNCC: 1 | RNVC: 2
7-317237340-5: RNCC: 3 | RNVC: 2

31 Aug 1999

3040-01-476-0253
Housing Adapter

014760253
C316681: RNCC: 3 | RNVC: 9

22 Jun 2000

3040-01-476-2030
Rigid Connecting Link

014762030
6650665: RNCC: 3 | RNVC: 2

29 Jun 2000

3040-01-476-2368
Shaft Collar

014762368
235A2300EEG01: RNCC: 3 | RNVC: 2

3 Jul 2000

3040-01-476-4890
Manual Control Lever

014764890
NMP-701-25: RNCC: 3 | RNVC: 2
NMP-701: RNCC: 5 | RNVC: 9
NMP-701-25: RNCC: C | RNVC: 1

13 Jul 2000

3040-01-477-3422
Pawl

014773422
9326100414: RNCC: 3 | RNVC: 9
5110181005: RNCC: 5 | RNVC: 2
9236100410: RNCC: 5 | RNVC: 9

7 Aug 2000

3040-01-477-7891
Remote Control Lever

014777891
6030004341: RNCC: 3 | RNVC: 2

18 Aug 2000

3040-01-478-0446
Shouldered Shaft

014780446
136765: RNCC: 3 | RNVC: 2
0740179: RNCC: 5 | RNVC: 2
SP40075A: RNCC: 5 | RNVC: 9

29 Aug 2000

3040-01-478-0487
Straight Shaft

014780487
100081-1: RNCC: 3 | RNVC: 2
100081-1: RNCC: 5 | RNVC: 2

29 Aug 2000

3040-01-478-0640
Rigid Connecting Link

014780640
133883: RNCC: 3 | RNVC: 9
133883: RNCC: 5 | RNVC: 2
133883: RNCC: 5 | RNVC: 9

29 Aug 2000

3040-01-478-3385
Linear Actuating Cylinder Cap

014783385
39252: RNCC: 3 | RNVC: 2
41042-39245 ITEM 7: RNCC: 5 | RNVC: 2
41042-39245 ITEM 7: RNCC: 5 | RNVC: 2
39252: RNCC: 5 | RNVC: 2
41042-39245: RNCC: D | RNVC: 9
41042-39245: RNCC: D | RNVC: 9

7 Sep 2000

3040-01-479-9045
Nonrotating Shaft Eye Bracket

014799045
7HB500: RNCC: 3 | RNVC: 2
7HB500: RNCC: 3 | RNVC: 9
12382: RNCC: 5 | RNVC: 2
12382-G: RNCC: 5 | RNVC: 9

1 Nov 2000

3040-01-480-7192
Nonaircraft Mechanical Actuator

014807192
136401: RNCC: 3 | RNVC: 2

4 Dec 2000

3040-01-481-3395
Straight Shaft Assembly

014813395
863-310929: RNCC: 3 | RNVC: 2
5-10-G00012: RNCC: 5 | RNVC: 2

2 Jan 2001

3040-01-481-6008
Mechanical Drive Housing

014816008
3881221-2: RNCC: 3 | RNVC: 2

17 Jan 2001

3040-01-481-6355
Ai Shouldered Shaft

014816355
10052610: RNCC: 3 | RNVC: 2

18 Jan 2001

3040-01-483-6214
Control Cam

014836214
309714: RNCC: 3 | RNVC: 2
214745: RNCC: 5 | RNVC: 2

4 Apr 2001

3040-01-484-0940
Shouldered Shaft

014840940
122-6722635 PC 8: RNCC: 3 | RNVC: 2
122-6818601 PC 85: RNCC: 5 | RNVC: 2
6818601: RNCC: D | RNVC: 9
6722635: RNCC: D | RNVC: 9

18 Apr 2001

3040-01-485-6978
Rigid Connecting Link

014856978
6853521 ITEM NO. 28: RNCC: 3 | RNVC: 2
6853521: RNCC: D | RNVC: 9

4 Jun 2001

3040-01-486-0417
Linear Actuating Cylinder

014860417
TS18131STU002: RNCC: 3 | RNVC: 2
6532C329-3: RNCC: 5 | RNVC: 2
6532C329: RNCC: 5 | RNVC: 2
TS18131ST: RNCC: 5 | RNVC: 9
TS18131STU002 AND FZ-2007: RNCC: 5 | RNVC: 9

18 Jun 2001

3040-01-486-4200
Straight Shaft Assembly

014864200
D35-007-1217: RNCC: 3 | RNVC: 2
D35C2500004 ITEM 6: RNCC: 5 | RNVC: 2

28 Jun 2001

3040-01-487-1444
Nonrotating Shaft Eye Bracket

014871444
7009488-1: RNCC: 3 | RNVC: 2
6853526 ITEM NO 16: RNCC: D | RNVC: 9

25 Jul 2001

3040-01-486-9536
Shaft Collar

014869536
122-6776881 PC 47: RNCC: 3 | RNVC: 2
122-6776881: RNCC: D | RNVC: 9

19 Jul 2001

3040-01-488-9255
Aircr Collet Collar

014889255
7-0508-2: RNCC: 3 | RNVC: 2

6 Sep 2001

3040-01-490-7450
Rigid Connecting Link

014907450
124-7120998 PC 18: RNCC: 3 | RNVC: 2
124-7120998: RNCC: D | RNVC: 9

5 Oct 2001

3040-01-491-3369
Worm Shaft

014913369
167-6985306 PART 32: RNCC: 3 | RNVC: 2
H542-1701 PART 32: RNCC: 5 | RNVC: 2
H542-1701: RNCC: D | RNVC: 9
6985306: RNCC: D | RNVC: 9

18 Oct 2001

3040-01-496-0549
Rigid Connecting Link

014960549
805-1400074 PC 12: RNCC: 3 | RNVC: 2
13565-000: RNCC: 5 | RNVC: 2
074-12: RNCC: C | RNVC: 1
805-1400074: RNCC: D | RNVC: 9

1 Apr 2002

3040-01-497-0997
Counterbalance Weight

014970997
5126T81P03: RNCC: 3 | RNVC: 2
5126T81P03: RNCC: 5 | RNVC: 9

9 May 2002

3040-01-497-1000
Counterbalance Weight

014971000
5126T45P03: RNCC: 3 | RNVC: 2

9 May 2002

3040-01-498-1887
Linear Actuating Cylinder Assembly Parts Kit

014981887
1643812: RNCC: 3 | RNVC: 2
404939: RNCC: 5 | RNVC: 9

18 Jun 2002

3040-01-497-7272
Counterbalance Weight

014977272
6935104: RNCC: 3 | RNVC: 2

3 Jun 2002

3040-01-497-9898
Rigid Connecting Link

014979898
137773: RNCC: 3 | RNVC: 2

11 Jun 2002

3040-01-497-9884
Rigid Connecting Link

014979884
154072: RNCC: 3 | RNVC: 2

11 Jun 2002

Load More Results